Replace all inline definitions with GFXINLINE

2 files changed, 13 insertions, 13 deletions

diff --git a/drivers/gdisp/RA8875/board_RA8875_template.h b/drivers/gdisp/RA8875/board_RA8875_template.h
index 292484f5..19793bc4 100644
--- a/drivers/gdisp/RA8875/board_RA8875_template.h
+++ b/drivers/gdisp/RA8875/board_RA8875_template.h
@@ -8,46 +8,46 @@
 #ifndef _GDISP_LLD_BOARD_H
 #define _GDISP_LLD_BOARD_H
 
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
 	(void) g;
 }
 
-static inline void post_init_board(GDisplay *g) {
+static GFXINLINE void post_init_board(GDisplay *g) {
 	(void) g;
 }
 
-static inline void setpin_reset(GDisplay *g, bool_t state) {
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 	(void) state;
 }
 
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
 	(void) g;
 }
 
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
 	(void) g;
 }
 
-static inline void write_index(GDisplay *g, uint16_t index) {
+static GFXINLINE void write_index(GDisplay *g, uint16_t index) {
 	(void) g;
 	(void) index;
 }
 
-static inline void write_data(GDisplay *g, uint16_t data) {
+static GFXINLINE void write_data(GDisplay *g, uint16_t data) {
 	(void) g;
 	(void) data;
 }
 
-static inline void setreadmode(GDisplay *g) {
+static GFXINLINE void setreadmode(GDisplay *g) {
 	(void) g;
 }
 
-static inline void setwritemode(GDisplay *g) {
+static GFXINLINE void setwritemode(GDisplay *g) {
 	(void) g;
 }
 
-static inline uint16_t read_data(GDisplay *g) {
+static GFXINLINE uint16_t read_data(GDisplay *g) {
 	(void) g;
 }
 
diff --git a/drivers/gdisp/RA8875/gdisp_lld_RA8875.c b/drivers/gdisp/RA8875/gdisp_lld_RA8875.c
index 0da233db..a962f2f2 100644
--- a/drivers/gdisp/RA8875/gdisp_lld_RA8875.c
+++ b/drivers/gdisp/RA8875/gdisp_lld_RA8875.c
@@ -43,13 +43,13 @@
 #define write_reg16(g, reg, data)		{ write_index(g, reg); write_data(g, data); write_index(g, reg+1); write_data(g, (data)>>8); }
 #define write_reg8x2(g, reg, d1, d2)	{ write_index(g, reg); write_data(g, d1); write_data(g, d2); }
 
-static inline void set_cursor(GDisplay *g) {
+static GFXINLINE void set_cursor(GDisplay *g) {
 	write_reg16(g, 0x46, g->p.x);
 	write_reg16(g, 0x48, g->p.y);
 	write_index(g, 0x02);
 }
 
-static inline void set_viewport(GDisplay* g) {
+static GFXINLINE void set_viewport(GDisplay* g) {
 	write_reg16(g, 0x30, g->p.x);				//HSAW0 & HSAW1
 	write_reg16(g, 0x34, g->p.x+g->p.cx-1);		//HEAW0 & HEAW1
 	write_reg16(g, 0x32, g->p.y);				//VSAW0 & VSAW1
@@ -58,7 +58,7 @@ static inline void set_viewport(GDisplay* g) {
 
 // On this controller the back-light is controlled by the controllers internal PWM
 //	which is why it is in this file rather than the board file.
-static inline void set_backlight(GDisplay* g, uint8_t percent) {
+static GFXINLINE void set_backlight(GDisplay* g, uint8_t percent) {
 	uint8_t temp;
 
 	//Work in progress: the RA8875 has a built-in PWM, its output can