cleanups

1 files changed, 0 insertions, 96 deletions

diff --git a/board.h b/board.h
deleted file mode 100644
index 1dcaba2d..00000000
--- a/board.h
+++ /dev/null
@@ -1,96 +0,0 @@
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-// Board identifier.
-#define BOARD_MY_BOARD
-#define BOARD_NAME              "my board"
-
-// Board frequencies.
-#define STM32_LSECLK            32768
-#define STM32_HSECLK            8000000
-
-// MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
-#define STM32F10X_HD
-
-// IO pins assignments.
-#define GPIOA_BUTTON         8
-
-#define GPIOD_LED1          8
-#define GPIOD_LED2          9
-#define GPIOD_LED3          10
-#define GPIOD_LED4			11
-
-#define GPIOA_SPI1NSS		4
-#define GPIOB_SPI2NSS       12
-#define GPIOA_SPI3NSS		15
-#define GPIOA_MMCCP         4
-#define GPIOC_SDPWR			8
-#define GPIOC_USBPWR		9
-
-#define TP_PORT				GPIOC
-#define TP_IRQ				4
-#define TP_CS				6
-
-#define LCD_DATA_PORT		GPIOE
-#define LCD_CMD_PORT		GPIOD
-#define LCD_CS				12
-#define LCD_RS				13
-#define LCD_WR				14
-#define LCD_RD				15
-
-    /*
-    * I/O ports initial setup, this configuration is established soon after reset
-    * in the initialization code.
-    *
-    * The digits have the following meaning:
-    *   0 - Analog input.
-    *   1 - Push Pull output 10MHz.
-    *   2 - Push Pull output 2MHz.
-    *   3 - Push Pull output 50MHz.
-    *   4 - Digital input.
-    *   5 - Open Drain output 10MHz.
-    *   6 - Open Drain output 2MHz.
-    *   7 - Open Drain output 50MHz.
-    *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
-    *   9 - Alternate Push Pull output 10MHz.
-    *   A - Alternate Push Pull output 2MHz.
-    *   B - Alternate Push Pull output 50MHz.
-    *   C - Reserved.
-    *   D - Alternate Open Drain output 10MHz.
-    *   E - Alternate Open Drain output 2MHz.
-    *   F - Alternate Open Drain output 50MHz.
-    * Please refer to the STM32 Reference Manual for details.
-    */
-
-#define VAL_GPIOACRL            0xB4B44B34      /*  PA7...PA0 */
-#define VAL_GPIOACRH            0x444334B4      /* PA15...PA8 */
-#define VAL_GPIOAODR            0xFFFFFFFF
-
-#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
-#define VAL_GPIOBCRH            0xB4B88888      /* PB15...PB8 */
-#define VAL_GPIOBODR            0xFFFFFFFF
-
-#define VAL_GPIOCCRL            0x33048888      /*  PC7...PC0 */
-#define VAL_GPIOCCRH            0x88833383      /* PC15...PC8 */
-#define VAL_GPIOCODR            0xFFFFFFFF
-
-#define VAL_GPIODCRL            0x33388888      /*  PD7...PD0 */
-#define VAL_GPIODCRH            0x33333333      /* PD15...PD8 */
-#define VAL_GPIODODR            0xFFFFFFFF
-
-#define VAL_GPIOECRL            0x33333333      /*  PE7...PE0 */
-#define VAL_GPIOECRH            0x33333333      /* PE15...PE8 */
-#define VAL_GPIOEODR            0xFFFFFFFF
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-	#endif
-	void boardInit(void);
-	#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
-