docs

1 files changed, 1824 insertions, 1747 deletions

diff --git a/Doxygenfile b/Doxygenfile
index 4b4992bc..eae03f31 100644
--- a/Doxygenfile
+++ b/Doxygenfile
@@ -1,1747 +1,1824 @@
- # Doxyfile 1.7.4

-

-# This file describes the settings to be used by the documentation system

-# doxygen (www.doxygen.org) for a project.

-#

-# All text after a hash (#) is considered a comment and will be ignored.

-# The format is:

-#       TAG = value [value, ...]

-# For lists items can also be appended using:

-#       TAG += value [value, ...]

-# Values that contain spaces should be placed between quotes (" ").

-

-#---------------------------------------------------------------------------

-# Project related configuration options

-#---------------------------------------------------------------------------

-

-# This tag specifies the encoding used for all characters in the config file

-# that follow. The default is UTF-8 which is also the encoding used for all

-# text before the first occurrence of this tag. Doxygen uses libiconv (or the

-# iconv built into libc) for the transcoding. See

-# http://www.gnu.org/software/libiconv for the list of possible encodings.

-

-DOXYFILE_ENCODING      = UTF-8

-

-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded

-# by quotes) that should identify the project.

-

-PROJECT_NAME           = ChibiOS/GFX

-

-# The PROJECT_NUMBER tag can be used to enter a project or revision number.

-# This could be handy for archiving the generated documentation or

-# if some version control system is used.

-

-PROJECT_NUMBER         = 1.3

-

-# Using the PROJECT_BRIEF tag one can provide an optional one line description

-# for a project that appears at the top of each page and should give viewer

-# a quick idea about the purpose of the project. Keep the description short.

-

-PROJECT_BRIEF          =

-

-# With the PROJECT_LOGO tag one can specify an logo or icon that is

-# included in the documentation. The maximum height of the logo should not

-# exceed 55 pixels and the maximum width should not exceed 200 pixels.

-# Doxygen will copy the logo to the output directory.

-

-PROJECT_LOGO           =

-

-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)

-# base path where the generated documentation will be put.

-# If a relative path is entered, it will be relative to the location

-# where doxygen was started. If left blank the current directory will be used.

-

-OUTPUT_DIRECTORY       = docs

-

-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create

-# 4096 sub-directories (in 2 levels) under the output directory of each output

-# format and will distribute the generated files over these directories.

-# Enabling this option can be useful when feeding doxygen a huge amount of

-# source files, where putting all generated files in the same directory would

-# otherwise cause performance problems for the file system.

-

-CREATE_SUBDIRS         = NO

-

-# The OUTPUT_LANGUAGE tag is used to specify the language in which all

-# documentation generated by doxygen is written. Doxygen will use this

-# information to generate all constant output in the proper language.

-# The default language is English, other supported languages are:

-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,

-# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,

-# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English

-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,

-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,

-# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.

-

-OUTPUT_LANGUAGE        = English

-

-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will

-# include brief member descriptions after the members that are listed in

-# the file and class documentation (similar to JavaDoc).

-# Set to NO to disable this.

-

-BRIEF_MEMBER_DESC      = YES

-

-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend

-# the brief description of a member or function before the detailed description.

-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the

-# brief descriptions will be completely suppressed.

-

-REPEAT_BRIEF           = YES

-

-# This tag implements a quasi-intelligent brief description abbreviator

-# that is used to form the text in various listings. Each string

-# in this list, if found as the leading text of the brief description, will be

-# stripped from the text and the result after processing the whole list, is

-# used as the annotated text. Otherwise, the brief description is used as-is.

-# If left blank, the following values are used ("$name" is automatically

-# replaced with the name of the entity): "The $name class" "The $name widget"

-# "The $name file" "is" "provides" "specifies" "contains"

-# "represents" "a" "an" "the"

-

-ABBREVIATE_BRIEF       = "The $name class" \

-                         "The $name widget" \

-                         "The $name file" \

-                         is \

-                         provides \

-                         specifies \

-                         contains \

-                         represents \

-                         a \

-                         an \

-                         the

-

-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then

-# Doxygen will generate a detailed section even if there is only a brief

-# description.

-

-ALWAYS_DETAILED_SEC    = YES

-

-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all

-# inherited members of a class in the documentation of that class as if those

-# members were ordinary class members. Constructors, destructors and assignment

-# operators of the base classes will not be shown.

-

-INLINE_INHERITED_MEMB  = NO

-

-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full

-# path before files name in the file list and in the header files. If set

-# to NO the shortest path that makes the file name unique will be used.

-

-FULL_PATH_NAMES        = NO

-

-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag

-# can be used to strip a user-defined part of the path. Stripping is

-# only done if one of the specified strings matches the left-hand part of

-# the path. The tag can be used to show relative paths in the file list.

-# If left blank the directory from which doxygen is run is used as the

-# path to strip.

-

-STRIP_FROM_PATH        = "C:/Documents and Settings/Administrator/"

-

-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of

-# the path mentioned in the documentation of a class, which tells

-# the reader which header file to include in order to use a class.

-# If left blank only the name of the header file containing the class

-# definition is used. Otherwise one should specify the include paths that

-# are normally passed to the compiler using the -I flag.

-

-STRIP_FROM_INC_PATH    =

-

-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter

-# (but less readable) file names. This can be useful if your file system

-# doesn't support long names like on DOS, Mac, or CD-ROM.

-

-SHORT_NAMES            = NO

-

-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen

-# will interpret the first line (until the first dot) of a JavaDoc-style

-# comment as the brief description. If set to NO, the JavaDoc

-# comments will behave just like regular Qt-style comments

-# (thus requiring an explicit @brief command for a brief description.)

-

-JAVADOC_AUTOBRIEF      = NO

-

-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will

-# interpret the first line (until the first dot) of a Qt-style

-# comment as the brief description. If set to NO, the comments

-# will behave just like regular Qt-style comments (thus requiring

-# an explicit \brief command for a brief description.)

-

-QT_AUTOBRIEF           = NO

-

-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen

-# treat a multi-line C++ special comment block (i.e. a block of //! or ///

-# comments) as a brief description. This used to be the default behaviour.

-# The new default is to treat a multi-line C++ comment block as a detailed

-# description. Set this tag to YES if you prefer the old behaviour instead.

-

-MULTILINE_CPP_IS_BRIEF = NO

-

-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented

-# member inherits the documentation from any documented member that it

-# re-implements.

-

-INHERIT_DOCS           = NO

-

-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce

-# a new page for each member. If set to NO, the documentation of a member will

-# be part of the file/class/namespace that contains it.

-

-SEPARATE_MEMBER_PAGES  = NO

-

-# The TAB_SIZE tag can be used to set the number of spaces in a tab.

-# Doxygen uses this value to replace tabs by spaces in code fragments.

-

-TAB_SIZE               = 2

-

-# This tag can be used to specify a number of aliases that acts

-# as commands in the documentation. An alias has the form "name=value".

-# For example adding "sideeffect=\par Side Effects:\n" will allow you to

-# put the command \sideeffect (or @sideeffect) in the documentation, which

-# will result in a user-defined paragraph with heading "Side Effects:".

-# You can put \n's in the value part of an alias to insert newlines.

-

-ALIASES                = "iclass=@par Function Class:\n This is an \

-                          <b>I-Class</b> API, this function can be \

-                          invoked from within a system lock zone by both \

-                          threads and interrupt handlers." \

-                         "sclass=@par Function Class:\n This is an \

-                          <b>S-Class</b> API, this function can be \

-                          invoked from within a system lock zone by threads \

-                          only." \

-                         "api=@par Function Class:\n Normal API, this \

-                          function can be invoked by regular system threads \

-                          but not from within a lock zone." \

-                         "notapi=@par Function Class:\n Not an API, this \

-                          function is for internal use only." \

-                         "isr=@par Function Class:\n Interrupt handler, \

-                          this function should not be directly invoked." \

-                         "init=@par Function Class:\n Initializer, this \

-                          function just initializes an object and can be \

-                          invoked before the kernel is initialized." \

-                         "special=@par Function Class:\n Special function, \

-                          this function has special requirements see the \

-                          notes."

-

-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C

-# sources only. Doxygen will then generate output that is more tailored for C.

-# For instance, some of the names that are used will be different. The list

-# of all members will be omitted, etc.

-

-OPTIMIZE_OUTPUT_FOR_C  = YES

-

-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java

-# sources only. Doxygen will then generate output that is more tailored for

-# Java. For instance, namespaces will be presented as packages, qualified

-# scopes will look different, etc.

-

-OPTIMIZE_OUTPUT_JAVA   = NO

-

-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran

-# sources only. Doxygen will then generate output that is more tailored for

-# Fortran.

-

-OPTIMIZE_FOR_FORTRAN   = NO

-

-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL

-# sources. Doxygen will then generate output that is tailored for

-# VHDL.

-

-OPTIMIZE_OUTPUT_VHDL   = NO

-

-# Doxygen selects the parser to use depending on the extension of the files it

-# parses. With this tag you can assign which parser to use for a given extension.

-# Doxygen has a built-in mapping, but you can override or extend it using this

-# tag. The format is ext=language, where ext is a file extension, and language

-# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,

-# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make

-# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C

-# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions

-# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.

-

-EXTENSION_MAPPING      =

-

-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want

-# to include (a tag file for) the STL sources as input, then you should

-# set this tag to YES in order to let doxygen match functions declarations and

-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.

-# func(std::string) {}). This also makes the inheritance and collaboration

-# diagrams that involve STL classes more complete and accurate.

-

-BUILTIN_STL_SUPPORT    = NO

-

-# If you use Microsoft's C++/CLI language, you should set this option to YES to

-# enable parsing support.

-

-CPP_CLI_SUPPORT        = NO

-

-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.

-# Doxygen will parse them like normal C++ but will assume all classes use public

-# instead of private inheritance when no explicit protection keyword is present.

-

-SIP_SUPPORT            = NO

-

-# For Microsoft's IDL there are propget and propput attributes to indicate getter

-# and setter methods for a property. Setting this option to YES (the default)

-# will make doxygen replace the get and set methods by a property in the

-# documentation. This will only work if the methods are indeed getting or

-# setting a simple type. If this is not the case, or you want to show the

-# methods anyway, you should set this option to NO.

-

-IDL_PROPERTY_SUPPORT   = YES

-

-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC

-# tag is set to YES, then doxygen will reuse the documentation of the first

-# member in the group (if any) for the other members of the group. By default

-# all members of a group must be documented explicitly.

-

-DISTRIBUTE_GROUP_DOC   = NO

-

-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of

-# the same type (for instance a group of public functions) to be put as a

-# subgroup of that type (e.g. under the Public Functions section). Set it to

-# NO to prevent subgrouping. Alternatively, this can be done per class using

-# the \nosubgrouping command.

-

-SUBGROUPING            = YES

-

-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and

-# unions are shown inside the group in which they are included (e.g. using

-# @ingroup) instead of on a separate page (for HTML and Man pages) or

-# section (for LaTeX and RTF).

-

-INLINE_GROUPED_CLASSES = NO

-

-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum

-# is documented as struct, union, or enum with the name of the typedef. So

-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct

-# with name TypeT. When disabled the typedef will appear as a member of a file,

-# namespace, or class. And the struct will be named TypeS. This can typically

-# be useful for C code in case the coding convention dictates that all compound

-# types are typedef'ed and only the typedef is referenced, never the tag name.

-

-TYPEDEF_HIDES_STRUCT   = NO

-

-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to

-# determine which symbols to keep in memory and which to flush to disk.

-# When the cache is full, less often used symbols will be written to disk.

-# For small to medium size projects (<1000 input files) the default value is

-# probably good enough. For larger projects a too small cache size can cause

-# doxygen to be busy swapping symbols to and from disk most of the time

-# causing a significant performance penalty.

-# If the system has enough physical memory increasing the cache will improve the

-# performance by keeping more symbols in memory. Note that the value works on

-# a logarithmic scale so increasing the size by one will roughly double the

-# memory usage. The cache size is given by this formula:

-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,

-# corresponding to a cache size of 2^16 = 65536 symbols

-

-SYMBOL_CACHE_SIZE      = 0

-

-#---------------------------------------------------------------------------

-# Build related configuration options

-#---------------------------------------------------------------------------

-

-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in

-# documentation are documented, even if no documentation was available.

-# Private class members and static file members will be hidden unless

-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

-

-EXTRACT_ALL            = NO

-

-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class

-# will be included in the documentation.

-

-EXTRACT_PRIVATE        = NO

-

-# If the EXTRACT_STATIC tag is set to YES all static members of a file

-# will be included in the documentation.

-

-EXTRACT_STATIC         = NO

-

-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)

-# defined locally in source files will be included in the documentation.

-# If set to NO only classes defined in header files are included.

-

-EXTRACT_LOCAL_CLASSES  = NO

-

-# This flag is only useful for Objective-C code. When set to YES local

-# methods, which are defined in the implementation section but not in

-# the interface are included in the documentation.

-# If set to NO (the default) only methods in the interface are included.

-

-EXTRACT_LOCAL_METHODS  = NO

-

-# If this flag is set to YES, the members of anonymous namespaces will be

-# extracted and appear in the documentation as a namespace called

-# 'anonymous_namespace{file}', where file will be replaced with the base

-# name of the file that contains the anonymous namespace. By default

-# anonymous namespaces are hidden.

-

-EXTRACT_ANON_NSPACES   = NO

-

-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all

-# undocumented members of documented classes, files or namespaces.

-# If set to NO (the default) these members will be included in the

-# various overviews, but no documentation section is generated.

-# This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_MEMBERS     = YES

-

-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all

-# undocumented classes that are normally visible in the class hierarchy.

-# If set to NO (the default) these classes will be included in the various

-# overviews. This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_CLASSES     = YES

-

-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all

-# friend (class|struct|union) declarations.

-# If set to NO (the default) these declarations will be included in the

-# documentation.

-

-HIDE_FRIEND_COMPOUNDS  = NO

-

-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any

-# documentation blocks found inside the body of a function.

-# If set to NO (the default) these blocks will be appended to the

-# function's detailed documentation block.

-

-HIDE_IN_BODY_DOCS      = NO

-

-# The INTERNAL_DOCS tag determines if documentation

-# that is typed after a \internal command is included. If the tag is set

-# to NO (the default) then the documentation will be excluded.

-# Set it to YES to include the internal documentation.

-

-INTERNAL_DOCS          = NO

-

-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate

-# file names in lower-case letters. If set to YES upper-case letters are also

-# allowed. This is useful if you have classes or files whose names only differ

-# in case and if your file system supports case sensitive file names. Windows

-# and Mac users are advised to set this option to NO.

-

-CASE_SENSE_NAMES       = NO

-

-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen

-# will show members with their full class and namespace scopes in the

-# documentation. If set to YES the scope will be hidden.

-

-HIDE_SCOPE_NAMES       = NO

-

-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen

-# will put a list of the files that are included by a file in the documentation

-# of that file.

-

-SHOW_INCLUDE_FILES     = YES

-

-# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen

-# will list include files with double quotes in the documentation

-# rather than with sharp brackets.

-

-FORCE_LOCAL_INCLUDES   = NO

-

-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]

-# is inserted in the documentation for inline members.

-

-INLINE_INFO            = YES

-

-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen

-# will sort the (detailed) documentation of file and class members

-# alphabetically by member name. If set to NO the members will appear in

-# declaration order.

-

-SORT_MEMBER_DOCS       = NO

-

-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the

-# brief documentation of file, namespace and class members alphabetically

-# by member name. If set to NO (the default) the members will appear in

-# declaration order.

-

-SORT_BRIEF_DOCS        = NO

-

-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen

-# will sort the (brief and detailed) documentation of class members so that

-# constructors and destructors are listed first. If set to NO (the default)

-# the constructors will appear in the respective orders defined by

-# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.

-# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO

-# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.

-

-SORT_MEMBERS_CTORS_1ST = NO

-

-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the

-# hierarchy of group names into alphabetical order. If set to NO (the default)

-# the group names will appear in their defined order.

-

-SORT_GROUP_NAMES       = NO

-

-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be

-# sorted by fully-qualified names, including namespaces. If set to

-# NO (the default), the class list will be sorted only by class name,

-# not including the namespace part.

-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.

-# Note: This option applies only to the class list, not to the

-# alphabetical list.

-

-SORT_BY_SCOPE_NAME     = NO

-

-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to

-# do proper type resolution of all parameters of a function it will reject a

-# match between the prototype and the implementation of a member function even

-# if there is only one candidate or it is obvious which candidate to choose

-# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen

-# will still accept a match between prototype and implementation in such cases.

-

-STRICT_PROTO_MATCHING  = NO

-

-# The GENERATE_TODOLIST tag can be used to enable (YES) or

-# disable (NO) the todo list. This list is created by putting \todo

-# commands in the documentation.

-

-GENERATE_TODOLIST      = YES

-

-# The GENERATE_TESTLIST tag can be used to enable (YES) or

-# disable (NO) the test list. This list is created by putting \test

-# commands in the documentation.

-

-GENERATE_TESTLIST      = YES

-

-# The GENERATE_BUGLIST tag can be used to enable (YES) or

-# disable (NO) the bug list. This list is created by putting \bug

-# commands in the documentation.

-

-GENERATE_BUGLIST       = YES

-

-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or

-# disable (NO) the deprecated list. This list is created by putting

-# \deprecated commands in the documentation.

-

-GENERATE_DEPRECATEDLIST= YES

-

-# The ENABLED_SECTIONS tag can be used to enable conditional

-# documentation sections, marked by \if sectionname ... \endif.

-

-ENABLED_SECTIONS       =

-

-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines

-# the initial value of a variable or macro consists of for it to appear in

-# the documentation. If the initializer consists of more lines than specified

-# here it will be hidden. Use a value of 0 to hide initializers completely.

-# The appearance of the initializer of individual variables and macros in the

-# documentation can be controlled using \showinitializer or \hideinitializer

-# command in the documentation regardless of this setting.

-

-MAX_INITIALIZER_LINES  = 30

-

-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated

-# at the bottom of the documentation of classes and structs. If set to YES the

-# list will mention the files that were used to generate the documentation.

-

-SHOW_USED_FILES        = NO

-

-# If the sources in your project are distributed over multiple directories

-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy

-# in the documentation. The default is NO.

-

-SHOW_DIRECTORIES       = NO

-

-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.

-# This will remove the Files entry from the Quick Index and from the

-# Folder Tree View (if specified). The default is YES.

-

-SHOW_FILES             = YES

-

-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the

-# Namespaces page.

-# This will remove the Namespaces entry from the Quick Index

-# and from the Folder Tree View (if specified). The default is YES.

-

-SHOW_NAMESPACES        = YES

-

-# The FILE_VERSION_FILTER tag can be used to specify a program or script that

-# doxygen should invoke to get the current version for each file (typically from

-# the version control system). Doxygen will invoke the program by executing (via

-# popen()) the command <command> <input-file>, where <command> is the value of

-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file

-# provided by doxygen. Whatever the program writes to standard output

-# is used as the file version. See the manual for examples.

-

-FILE_VERSION_FILTER    =

-

-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed

-# by doxygen. The layout file controls the global structure of the generated

-# output files in an output format independent way. The create the layout file

-# that represents doxygen's defaults, run doxygen with the -l option.

-# You can optionally specify a file name after the option, if omitted

-# DoxygenLayout.xml will be used as the name of the layout file.

-

-LAYOUT_FILE            = docs/layout.xml

-

-#---------------------------------------------------------------------------

-# configuration options related to warning and progress messages

-#---------------------------------------------------------------------------

-

-# The QUIET tag can be used to turn on/off the messages that are generated

-# by doxygen. Possible values are YES and NO. If left blank NO is used.

-

-QUIET                  = YES

-

-# The WARNINGS tag can be used to turn on/off the warning messages that are

-# generated by doxygen. Possible values are YES and NO. If left blank

-# NO is used.

-

-WARNINGS               = YES

-

-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings

-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will

-# automatically be disabled.

-

-WARN_IF_UNDOCUMENTED   = YES

-

-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for

-# potential errors in the documentation, such as not documenting some

-# parameters in a documented function, or documenting parameters that

-# don't exist or using markup commands wrongly.

-

-WARN_IF_DOC_ERROR      = YES

-

-# The WARN_NO_PARAMDOC option can be enabled to get warnings for

-# functions that are documented, but have no documentation for their parameters

-# or return value. If set to NO (the default) doxygen will only warn about

-# wrong or incomplete parameter documentation, but not about the absence of

-# documentation.

-

-WARN_NO_PARAMDOC       = YES

-

-# The WARN_FORMAT tag determines the format of the warning messages that

-# doxygen can produce. The string should contain the $file, $line, and $text

-# tags, which will be replaced by the file and line number from which the

-# warning originated and the warning text. Optionally the format may contain

-# $version, which will be replaced by the version of the file (if it could

-# be obtained via FILE_VERSION_FILTER)

-

-WARN_FORMAT            = "$file:$line: $text"

-

-# The WARN_LOGFILE tag can be used to specify a file to which warning

-# and error messages should be written. If left blank the output is written

-# to stderr.

-

-WARN_LOGFILE           =

-

-#---------------------------------------------------------------------------

-# configuration options related to the input files

-#---------------------------------------------------------------------------

-

-# The INPUT tag can be used to specify the files and/or directories that contain

-# documented source files. You may enter file names like "myfile.cpp" or

-# directories like "/usr/src/myproject". Separate the files or directories

-# with spaces.

-

-INPUT					=

-

-# This tag can be used to specify the character encoding of the source files

-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is

-# also the default input encoding. Doxygen uses libiconv (or the iconv built

-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for

-# the list of possible encodings.

-

-INPUT_ENCODING         = UTF-8

-

-# If the value of the INPUT tag contains directories, you can use the

-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank the following patterns are tested:

-# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh

-# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py

-# *.f90 *.f *.for *.vhd *.vhdl

-

-FILE_PATTERNS          = 

-

-# The RECURSIVE tag can be used to turn specify whether or not subdirectories

-# should be searched for input files as well. Possible values are YES and NO.

-# If left blank NO is used.

-

-RECURSIVE              = YES

-

-# The EXCLUDE tag can be used to specify files and/or directories that should

-# excluded from the INPUT source files. This way you can easily exclude a

-# subdirectory from a directory tree whose root is specified with the INPUT tag.

-

-EXCLUDE                =

-

-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or

-# directories that are symbolic links (a Unix file system feature) are excluded

-# from the input.

-

-EXCLUDE_SYMLINKS       = NO

-

-# If the value of the INPUT tag contains directories, you can use the

-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude

-# certain files from those directories. Note that the wildcards are matched

-# against the file with absolute path, so to exclude all test directories

-# for example use the pattern */test/*

-

-EXCLUDE_PATTERNS       =

-

-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names

-# (namespaces, classes, functions, etc.) that should be excluded from the

-# output. The symbol name can be a fully qualified name, a word, or if the

-# wildcard * is used, a substring. Examples: ANamespace, AClass,

-# AClass::ANamespace, ANamespace::*Test

-

-EXCLUDE_SYMBOLS        =

-

-# The EXAMPLE_PATH tag can be used to specify one or more files or

-# directories that contain example code fragments that are included (see

-# the \include command).

-

-EXAMPLE_PATH           =

-

-# If the value of the EXAMPLE_PATH tag contains directories, you can use the

-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank all files are included.

-

-EXAMPLE_PATTERNS       = *

-

-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be

-# searched for input files to be used with the \include or \dontinclude

-# commands irrespective of the value of the RECURSIVE tag.

-# Possible values are YES and NO. If left blank NO is used.

-

-EXAMPLE_RECURSIVE      = NO

-

-# The IMAGE_PATH tag can be used to specify one or more files or

-# directories that contain image that are included in the documentation (see

-# the \image command).

-

-IMAGE_PATH             = ./rsc

-

-# The INPUT_FILTER tag can be used to specify a program that doxygen should

-# invoke to filter for each input file. Doxygen will invoke the filter program

-# by executing (via popen()) the command <filter> <input-file>, where <filter>

-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an

-# input file. Doxygen will then use the output that the filter program writes

-# to standard output.

-# If FILTER_PATTERNS is specified, this tag will be

-# ignored.

-

-INPUT_FILTER           =

-

-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern

-# basis.

-# Doxygen will compare the file name with each pattern and apply the

-# filter if there is a match.

-# The filters are a list of the form:

-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further

-# info on how filters are used. If FILTER_PATTERNS is empty or if

-# non of the patterns match the file name, INPUT_FILTER is applied.

-

-FILTER_PATTERNS        =

-

-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using

-# INPUT_FILTER) will be used to filter the input files when producing source

-# files to browse (i.e. when SOURCE_BROWSER is set to YES).

-

-FILTER_SOURCE_FILES    = NO

-

-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file

-# pattern. A pattern will override the setting for FILTER_PATTERN (if any)

-# and it is also possible to disable source filtering for a specific pattern

-# using *.ext= (so without naming a filter). This option only has effect when

-# FILTER_SOURCE_FILES is enabled.

-

-FILTER_SOURCE_PATTERNS =

-

-#---------------------------------------------------------------------------

-# configuration options related to source browsing

-#---------------------------------------------------------------------------

-

-# If the SOURCE_BROWSER tag is set to YES then a list of source files will

-# be generated. Documented entities will be cross-referenced with these sources.

-# Note: To get rid of all source code in the generated output, make sure also

-# VERBATIM_HEADERS is set to NO.

-

-SOURCE_BROWSER         = YES

-

-# Setting the INLINE_SOURCES tag to YES will include the body

-# of functions and classes directly in the documentation.

-

-INLINE_SOURCES         = NO

-

-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct

-# doxygen to hide any special comment blocks from generated source code

-# fragments. Normal C and C++ comments will always remain visible.

-

-STRIP_CODE_COMMENTS    = NO

-

-# If the REFERENCED_BY_RELATION tag is set to YES

-# then for each documented function all documented

-# functions referencing it will be listed.

-

-REFERENCED_BY_RELATION = YES

-

-# If the REFERENCES_RELATION tag is set to YES

-# then for each documented function all documented entities

-# called/used by that function will be listed.

-

-REFERENCES_RELATION    = YES

-

-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)

-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from

-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will

-# link to the source code.

-# Otherwise they will link to the documentation.

-

-REFERENCES_LINK_SOURCE = NO

-

-# If the USE_HTAGS tag is set to YES then the references to source code

-# will point to the HTML generated by the htags(1) tool instead of doxygen

-# built-in source browser. The htags tool is part of GNU's global source

-# tagging system (see http://www.gnu.org/software/global/global.html). You

-# will need version 4.8.6 or higher.

-

-USE_HTAGS              = NO

-

-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen

-# will generate a verbatim copy of the header file for each class for

-# which an include is specified. Set to NO to disable this.

-

-VERBATIM_HEADERS       = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the alphabetical class index

-#---------------------------------------------------------------------------

-

-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index

-# of all compounds will be generated. Enable this if the project

-# contains a lot of classes, structs, unions or interfaces.

-

-ALPHABETICAL_INDEX     = NO

-

-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then

-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns

-# in which this list will be split (can be a number in the range [1..20])

-

-COLS_IN_ALPHA_INDEX    = 5

-

-# In case all classes in a project start with a common prefix, all

-# classes will be put under the same header in the alphabetical index.

-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that

-# should be ignored while generating the index headers.

-

-IGNORE_PREFIX          =

-

-#---------------------------------------------------------------------------

-# configuration options related to the HTML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will

-# generate HTML output.

-

-GENERATE_HTML          = YES

-

-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `html' will be used as the default path.

-

-HTML_OUTPUT            = html

-

-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for

-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank

-# doxygen will generate files with .html extension.

-

-HTML_FILE_EXTENSION    = .html

-

-# The HTML_HEADER tag can be used to specify a personal HTML header for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard header. Note that when using a custom header you are responsible

-# for the proper inclusion of any scripts and style sheets that doxygen

-# needs, which is dependent on the configuration options used.

-# It is adviced to generate a default header using "doxygen -w html

-# header.html footer.html stylesheet.css YourConfigFile" and then modify

-# that header. Note that the header is subject to change so you typically

-# have to redo this when upgrading to a newer version of doxygen or when changing the value of configuration settings such as GENERATE_TREEVIEW!

-

-HTML_HEADER            =

-

-# The HTML_FOOTER tag can be used to specify a personal HTML footer for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard footer.

-

-HTML_FOOTER            =

-

-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading

-# style sheet that is used by each HTML page. It can be used to

-# fine-tune the look of the HTML output. If the tag is left blank doxygen

-# will generate a default style sheet. Note that doxygen will try to copy

-# the style sheet file to the HTML output directory, so don't put your own

-# stylesheet in the HTML output directory as well, or it will be erased!

-

-HTML_STYLESHEET        =

-

-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or

-# other source files which should be copied to the HTML output directory. Note

-# that these files will be copied to the base HTML output directory. Use the

-# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these

-# files. In the HTML_STYLESHEET file, use the file name only. Also note that

-# the files will be copied as-is; there are no commands or markers available.

-

-HTML_EXTRA_FILES       =

-

-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.

-# Doxygen will adjust the colors in the stylesheet and background images

-# according to this color. Hue is specified as an angle on a colorwheel,

-# see http://en.wikipedia.org/wiki/Hue for more information.

-# For instance the value 0 represents red, 60 is yellow, 120 is green,

-# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.

-# The allowed range is 0 to 359.

-

-HTML_COLORSTYLE_HUE    = 220

-

-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of

-# the colors in the HTML output. For a value of 0 the output will use

-# grayscales only. A value of 255 will produce the most vivid colors.

-

-HTML_COLORSTYLE_SAT    = 100

-

-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to

-# the luminance component of the colors in the HTML output. Values below

-# 100 gradually make the output lighter, whereas values above 100 make

-# the output darker. The value divided by 100 is the actual gamma applied,

-# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,

-# and 100 does not change the gamma.

-

-HTML_COLORSTYLE_GAMMA  = 80

-

-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML

-# page will contain the date and time when the page was generated. Setting

-# this to NO can help when comparing the output of multiple runs.

-

-HTML_TIMESTAMP         = YES

-

-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,

-# files or namespaces will be aligned in HTML using tables. If set to

-# NO a bullet list will be used.

-

-HTML_ALIGN_MEMBERS     = YES

-

-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML

-# documentation will contain sections that can be hidden and shown after the

-# page has loaded. For this to work a browser that supports

-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox

-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).

-

-HTML_DYNAMIC_SECTIONS  = NO

-

-# If the GENERATE_DOCSET tag is set to YES, additional index files

-# will be generated that can be used as input for Apple's Xcode 3

-# integrated development environment, introduced with OSX 10.5 (Leopard).

-# To create a documentation set, doxygen will generate a Makefile in the

-# HTML output directory. Running make will produce the docset in that

-# directory and running "make install" will install the docset in

-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find

-# it at startup.

-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html

-# for more information.

-

-GENERATE_DOCSET        = NO

-

-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the

-# feed. A documentation feed provides an umbrella under which multiple

-# documentation sets from a single provider (such as a company or product suite)

-# can be grouped.

-

-DOCSET_FEEDNAME        = "Doxygen generated docs"

-

-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that

-# should uniquely identify the documentation set bundle. This should be a

-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen

-# will append .docset to the name.

-

-DOCSET_BUNDLE_ID       = org.doxygen.Project

-

-# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify

-# the documentation publisher. This should be a reverse domain-name style

-# string, e.g. com.mycompany.MyDocSet.documentation.

-

-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher

-

-# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.

-

-DOCSET_PUBLISHER_NAME  = Publisher

-

-# If the GENERATE_HTMLHELP tag is set to YES, additional index files

-# will be generated that can be used as input for tools like the

-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)

-# of the generated HTML documentation.

-

-GENERATE_HTMLHELP      = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can

-# be used to specify the file name of the resulting .chm file. You

-# can add a path in front of the file if the result should not be

-# written to the html output directory.

-

-CHM_FILE               = ChibiOS-GFX.chm

-

-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can

-# be used to specify the location (absolute path including file name) of

-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run

-# the HTML help compiler on the generated index.hhp.

-

-HHC_LOCATION           = "\"C:/Program Files/HTML Help Workshop/hhc.exe\""

-

-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag

-# controls if a separate .chi index file is generated (YES) or that

-# it should be included in the master .chm file (NO).

-

-GENERATE_CHI           = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING

-# is used to encode HtmlHelp index (hhk), content (hhc) and project file

-# content.

-

-CHM_INDEX_ENCODING     =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag

-# controls whether a binary table of contents is generated (YES) or a

-# normal table of contents (NO) in the .chm file.

-

-BINARY_TOC             = NO

-

-# The TOC_EXPAND flag can be set to YES to add extra items for group members

-# to the contents of the HTML help documentation and to the tree view.

-

-TOC_EXPAND             = NO

-

-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and

-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated

-# that can be used as input for Qt's qhelpgenerator to generate a

-# Qt Compressed Help (.qch) of the generated HTML documentation.

-

-GENERATE_QHP           = NO

-

-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can

-# be used to specify the file name of the resulting .qch file.

-# The path specified is relative to the HTML output folder.

-

-QCH_FILE               =

-

-# The QHP_NAMESPACE tag specifies the namespace to use when generating

-# Qt Help Project output. For more information please see

-# http://doc.trolltech.com/qthelpproject.html#namespace

-

-QHP_NAMESPACE          = org.doxygen.Project

-

-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating

-# Qt Help Project output. For more information please see

-# http://doc.trolltech.com/qthelpproject.html#virtual-folders

-

-QHP_VIRTUAL_FOLDER     = doc

-

-# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to

-# add. For more information please see

-# http://doc.trolltech.com/qthelpproject.html#custom-filters

-

-QHP_CUST_FILTER_NAME   =

-

-# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the

-# custom filter to add. For more information please see

-# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">

-# Qt Help Project / Custom Filters</a>.

-

-QHP_CUST_FILTER_ATTRS  =

-

-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this

-# project's

-# filter section matches.

-# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">

-# Qt Help Project / Filter Attributes</a>.

-

-QHP_SECT_FILTER_ATTRS  =

-

-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can

-# be used to specify the location of Qt's qhelpgenerator.

-# If non-empty doxygen will try to run qhelpgenerator on the generated

-# .qhp file.

-

-QHG_LOCATION           =

-

-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files

-#  will be generated, which together with the HTML files, form an Eclipse help

-# plugin. To install this plugin and make it available under the help contents

-# menu in Eclipse, the contents of the directory containing the HTML and XML

-# files needs to be copied into the plugins directory of eclipse. The name of

-# the directory within the plugins directory should be the same as

-# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before

-# the help appears.

-

-GENERATE_ECLIPSEHELP   = NO

-

-# A unique identifier for the eclipse help plugin. When installing the plugin

-# the directory name containing the HTML and XML files should also have

-# this name.

-

-ECLIPSE_DOC_ID         = org.doxygen.Project

-

-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at

-# top of each HTML page. The value NO (the default) enables the index and

-# the value YES disables it.

-

-DISABLE_INDEX          = NO

-

-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values

-# (range [0,1..20]) that doxygen will group on one line in the generated HTML

-# documentation. Note that a value of 0 will completely suppress the enum

-# values from appearing in the overview section.

-

-ENUM_VALUES_PER_LINE   = 4

-

-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index

-# structure should be generated to display hierarchical information.

-# If the tag value is set to YES, a side panel will be generated

-# containing a tree-like index structure (just like the one that

-# is generated for HTML Help). For this to work a browser that supports

-# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).

-# Windows users are probably better off using the HTML help feature.

-

-GENERATE_TREEVIEW      = YES

-

-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,

-# and Class Hierarchy pages using a tree view instead of an ordered list.

-

-USE_INLINE_TREES       = NO

-

-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be

-# used to set the initial width (in pixels) of the frame in which the tree

-# is shown.

-

-TREEVIEW_WIDTH         = 250

-

-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open

-# links to external symbols imported via tag files in a separate window.

-

-EXT_LINKS_IN_WINDOW    = NO

-

-# Use this tag to change the font size of Latex formulas included

-# as images in the HTML documentation. The default is 10. Note that

-# when you change the font size after a successful doxygen run you need

-# to manually remove any form_*.png images from the HTML output directory

-# to force them to be regenerated.

-

-FORMULA_FONTSIZE       = 10

-

-# Use the FORMULA_TRANPARENT tag to determine whether or not the images

-# generated for formulas are transparent PNGs. Transparent PNGs are

-# not supported properly for IE 6.0, but are supported on all modern browsers.

-# Note that when changing this option you need to delete any form_*.png files

-# in the HTML output before the changes have effect.

-

-FORMULA_TRANSPARENT    = YES

-

-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax

-# (see http://www.mathjax.org) which uses client side Javascript for the

-# rendering instead of using prerendered bitmaps. Use this if you do not

-# have LaTeX installed or if you want to formulas look prettier in the HTML

-# output. When enabled you also need to install MathJax separately and

-# configure the path to it using the MATHJAX_RELPATH option.

-

-USE_MATHJAX            = NO

-

-# When MathJax is enabled you need to specify the location relative to the

-# HTML output directory using the MATHJAX_RELPATH option. The destination

-# directory should contain the MathJax.js script. For instance, if the mathjax

-# directory is located at the same level as the HTML output directory, then

-# MATHJAX_RELPATH should be ../mathjax. The default value points to the

-# mathjax.org site, so you can quickly see the result without installing

-# MathJax, but it is strongly recommended to install a local copy of MathJax

-# before deployment.

-

-MATHJAX_RELPATH        = http://www.mathjax.org/mathjax

-

-# When the SEARCHENGINE tag is enabled doxygen will generate a search box

-# for the HTML output. The underlying search engine uses javascript

-# and DHTML and should work on any modern browser. Note that when using

-# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets

-# (GENERATE_DOCSET) there is already a search function so this one should

-# typically be disabled. For large projects the javascript based search engine

-# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.

-

-SEARCHENGINE           = NO

-

-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be

-# implemented using a PHP enabled web server instead of at the web client

-# using Javascript. Doxygen will generate the search PHP script and index

-# file to put on the web server. The advantage of the server

-# based approach is that it scales better to large projects and allows

-# full text search. The disadvantages are that it is more difficult to setup

-# and does not have live searching capabilities.

-

-SERVER_BASED_SEARCH    = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the LaTeX output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will

-# generate Latex output.

-

-GENERATE_LATEX         = NO

-

-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `latex' will be used as the default path.

-

-LATEX_OUTPUT           = latex

-

-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be

-# invoked. If left blank `latex' will be used as the default command name.

-# Note that when enabling USE_PDFLATEX this option is only used for

-# generating bitmaps for formulas in the HTML output, but not in the

-# Makefile that is written to the output directory.

-

-LATEX_CMD_NAME         = latex

-

-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to

-# generate index for LaTeX. If left blank `makeindex' will be used as the

-# default command name.

-

-MAKEINDEX_CMD_NAME     = makeindex

-

-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact

-# LaTeX documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_LATEX          = NO

-

-# The PAPER_TYPE tag can be used to set the paper type that is used

-# by the printer. Possible values are: a4, letter, legal and

-# executive. If left blank a4wide will be used.

-

-PAPER_TYPE             = a4wide

-

-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX

-# packages that should be included in the LaTeX output.

-

-EXTRA_PACKAGES         =

-

-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for

-# the generated latex document. The header should contain everything until

-# the first chapter. If it is left blank doxygen will generate a

-# standard header. Notice: only use this tag if you know what you are doing!

-

-LATEX_HEADER           =

-

-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for

-# the generated latex document. The footer should contain everything after

-# the last chapter. If it is left blank doxygen will generate a

-# standard footer. Notice: only use this tag if you know what you are doing!

-

-LATEX_FOOTER           =

-

-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated

-# is prepared for conversion to pdf (using ps2pdf). The pdf file will

-# contain links (just like the HTML output) instead of page references

-# This makes the output suitable for online browsing using a pdf viewer.

-

-PDF_HYPERLINKS         = YES

-

-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of

-# plain latex in the generated Makefile. Set this option to YES to get a

-# higher quality PDF documentation.

-

-USE_PDFLATEX           = YES

-

-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.

-# command to the generated LaTeX files. This will instruct LaTeX to keep

-# running if errors occur, instead of asking the user for help.

-# This option is also used when generating formulas in HTML.

-

-LATEX_BATCHMODE        = NO

-

-# If LATEX_HIDE_INDICES is set to YES then doxygen will not

-# include the index chapters (such as File Index, Compound Index, etc.)

-# in the output.

-

-LATEX_HIDE_INDICES     = NO

-

-# If LATEX_SOURCE_CODE is set to YES then doxygen will include

-# source code with syntax highlighting in the LaTeX output.

-# Note that which sources are shown also depends on other settings

-# such as SOURCE_BROWSER.

-

-LATEX_SOURCE_CODE      = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the RTF output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output

-# The RTF output is optimized for Word 97 and may not look very pretty with

-# other RTF readers or editors.

-

-GENERATE_RTF           = NO

-

-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `rtf' will be used as the default path.

-

-RTF_OUTPUT             = rtf

-

-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact

-# RTF documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_RTF            = NO

-

-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated

-# will contain hyperlink fields. The RTF file will

-# contain links (just like the HTML output) instead of page references.

-# This makes the output suitable for online browsing using WORD or other

-# programs which support those fields.

-# Note: wordpad (write) and others do not support links.

-

-RTF_HYPERLINKS         = NO

-

-# Load stylesheet definitions from file. Syntax is similar to doxygen's

-# config file, i.e. a series of assignments. You only have to provide

-# replacements, missing definitions are set to their default value.

-

-RTF_STYLESHEET_FILE    =

-

-# Set optional variables used in the generation of an rtf document.

-# Syntax is similar to doxygen's config file.

-

-RTF_EXTENSIONS_FILE    =

-

-#---------------------------------------------------------------------------

-# configuration options related to the man page output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will

-# generate man pages

-

-GENERATE_MAN           = NO

-

-# The MAN_OUTPUT tag is used to specify where the man pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `man' will be used as the default path.

-

-MAN_OUTPUT             = man

-

-# The MAN_EXTENSION tag determines the extension that is added to

-# the generated man pages (default is the subroutine's section .3)

-

-MAN_EXTENSION          = .3

-

-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,

-# then it will generate one additional man file for each entity

-# documented in the real man page(s). These additional files

-# only source the real man page, but without them the man command

-# would be unable to find the correct page. The default is NO.

-

-MAN_LINKS              = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the XML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_XML tag is set to YES Doxygen will

-# generate an XML file that captures the structure of

-# the code including all documentation.

-

-GENERATE_XML           = NO

-

-# The XML_OUTPUT tag is used to specify where the XML pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `xml' will be used as the default path.

-

-XML_OUTPUT             = xml

-

-# The XML_SCHEMA tag can be used to specify an XML schema,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_SCHEMA             =

-

-# The XML_DTD tag can be used to specify an XML DTD,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_DTD                =

-

-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will

-# dump the program listings (including syntax highlighting

-# and cross-referencing information) to the XML output. Note that

-# enabling this will significantly increase the size of the XML output.

-

-XML_PROGRAMLISTING     = YES

-

-#---------------------------------------------------------------------------

-# configuration options for the AutoGen Definitions output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will

-# generate an AutoGen Definitions (see autogen.sf.net) file

-# that captures the structure of the code including all

-# documentation. Note that this feature is still experimental

-# and incomplete at the moment.

-

-GENERATE_AUTOGEN_DEF   = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the Perl module output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_PERLMOD tag is set to YES Doxygen will

-# generate a Perl module file that captures the structure of

-# the code including all documentation. Note that this

-# feature is still experimental and incomplete at the

-# moment.

-

-GENERATE_PERLMOD       = NO

-

-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate

-# the necessary Makefile rules, Perl scripts and LaTeX code to be able

-# to generate PDF and DVI output from the Perl module output.

-

-PERLMOD_LATEX          = NO

-

-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be

-# nicely formatted so it can be parsed by a human reader.

-# This is useful

-# if you want to understand what is going on.

-# On the other hand, if this

-# tag is set to NO the size of the Perl module output will be much smaller

-# and Perl will parse it just the same.

-

-PERLMOD_PRETTY         = YES

-

-# The names of the make variables in the generated doxyrules.make file

-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.

-# This is useful so different doxyrules.make files included by the same

-# Makefile don't overwrite each other's variables.

-

-PERLMOD_MAKEVAR_PREFIX =

-

-#---------------------------------------------------------------------------

-# Configuration options related to the preprocessor

-#---------------------------------------------------------------------------

-

-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will

-# evaluate all C-preprocessor directives found in the sources and include

-# files.

-

-ENABLE_PREPROCESSING   = YES

-

-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro

-# names in the source code. If set to NO (the default) only conditional

-# compilation will be performed. Macro expansion can be done in a controlled

-# way by setting EXPAND_ONLY_PREDEF to YES.

-

-MACRO_EXPANSION        = YES

-

-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES

-# then the macro expansion is limited to the macros specified with the

-# PREDEFINED and EXPAND_AS_DEFINED tags.

-

-EXPAND_ONLY_PREDEF     = YES

-

-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files

-# pointed to by INCLUDE_PATH will be searched when a #include is found.

-

-SEARCH_INCLUDES        = YES

-

-# The INCLUDE_PATH tag can be used to specify one or more directories that

-# contain include files that are not input files but should be processed by

-# the preprocessor.

-

-INCLUDE_PATH           =

-

-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard

-# patterns (like *.h and *.hpp) to filter out the header-files in the

-# directories. If left blank, the patterns specified with FILE_PATTERNS will

-# be used.

-

-INCLUDE_FILE_PATTERNS  =

-

-# The PREDEFINED tag can be used to specify one or more macro names that

-# are defined before the preprocessor is started (similar to the -D option of

-# gcc). The argument of the tag is a list of macros of the form: name

-# or name=definition (no spaces). If the definition and the = are

-# omitted =1 is assumed. To prevent a macro definition from being

-# undefined via #undef or recursively expanded use the := operator

-# instead of the = operator.

-

-PREDEFINED             = __DOXYGEN__

-

-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then

-# this tag can be used to specify a list of macro names that should be expanded.

-# The macro definition that is found in the sources will be used.

-# Use the PREDEFINED tag if you want to use a different macro definition that

-# overrules the definition found in the source code.

-

-EXPAND_AS_DEFINED      =

-

-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then

-# doxygen's preprocessor will remove all references to function-like macros

-# that are alone on a line, have an all uppercase name, and do not end with a

-# semicolon, because these will confuse the parser if not removed.

-

-SKIP_FUNCTION_MACROS   = NO

-

-#---------------------------------------------------------------------------

-# Configuration::additions related to external references

-#---------------------------------------------------------------------------

-

-# The TAGFILES option can be used to specify one or more tagfiles.

-# Optionally an initial location of the external documentation

-# can be added for each tagfile. The format of a tag file without

-# this location is as follows:

-#

-# TAGFILES = file1 file2 ...

-# Adding location for the tag files is done as follows:

-#

-# TAGFILES = file1=loc1 "file2 = loc2" ...

-# where "loc1" and "loc2" can be relative or absolute paths or

-# URLs. If a location is present for each tag, the installdox tool

-# does not have to be run to correct the links.

-# Note that each tag file must have a unique name

-# (where the name does NOT include the path)

-# If a tag file is not located in the directory in which doxygen

-# is run, you must also specify the path to the tagfile here.

-

-TAGFILES               =

-

-# When a file name is specified after GENERATE_TAGFILE, doxygen will create

-# a tag file that is based on the input files it reads.

-

-GENERATE_TAGFILE       =

-

-# If the ALLEXTERNALS tag is set to YES all external classes will be listed

-# in the class index. If set to NO only the inherited external classes

-# will be listed.

-

-ALLEXTERNALS           = NO

-

-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed

-# in the modules index. If set to NO, only the current project's groups will

-# be listed.

-

-EXTERNAL_GROUPS        = YES

-

-# The PERL_PATH should be the absolute path and name of the perl script

-# interpreter (i.e. the result of `which perl').

-

-PERL_PATH              = /usr/bin/perl

-

-#---------------------------------------------------------------------------

-# Configuration options related to the dot tool

-#---------------------------------------------------------------------------

-

-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will

-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base

-# or super classes. Setting the tag to NO turns the diagrams off. Note that

-# this option also works with HAVE_DOT disabled, but it is recommended to

-# install and use dot, since it yields more powerful graphs.

-

-CLASS_DIAGRAMS         = NO

-

-# You can define message sequence charts within doxygen comments using the \msc

-# command. Doxygen will then run the mscgen tool (see

-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the

-# documentation. The MSCGEN_PATH tag allows you to specify the directory where

-# the mscgen tool resides. If left empty the tool is assumed to be found in the

-# default search path.

-

-MSCGEN_PATH            =

-

-# If set to YES, the inheritance and collaboration graphs will hide

-# inheritance and usage relations if the target is undocumented

-# or is not a class.

-

-HIDE_UNDOC_RELATIONS   = YES

-

-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is

-# available from the path. This tool is part of Graphviz, a graph visualization

-# toolkit from AT&T and Lucent Bell Labs. The other options in this section

-# have no effect if this option is set to NO (the default)

-

-HAVE_DOT               = YES

-

-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is

-# allowed to run in parallel. When set to 0 (the default) doxygen will

-# base this on the number of processors available in the system. You can set it

-# explicitly to a value larger than 0 to get control over the balance

-# between CPU load and processing speed.

-

-DOT_NUM_THREADS        = 0

-

-# By default doxygen will write a font called Helvetica to the output

-# directory and reference it in all dot files that doxygen generates.

-# When you want a differently looking font you can specify the font name

-# using DOT_FONTNAME. You need to make sure dot is able to find the font,

-# which can be done by putting it in a standard location or by setting the

-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory

-# containing the font.

-

-DOT_FONTNAME           = FreeSans

-

-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.

-# The default size is 10pt.

-

-DOT_FONTSIZE           = 8

-

-# By default doxygen will tell dot to use the output directory to look for the

-# FreeSans.ttf font (which doxygen will put there itself). If you specify a

-# different font using DOT_FONTNAME you can set the path where dot

-# can find it using this tag.

-

-DOT_FONTPATH           =

-

-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect inheritance relations. Setting this tag to YES will force the

-# the CLASS_DIAGRAMS tag to NO.

-

-CLASS_GRAPH            = YES

-

-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect implementation dependencies (inheritance, containment, and

-# class references variables) of the class with other documented classes.

-

-COLLABORATION_GRAPH    = YES

-

-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for groups, showing the direct groups dependencies

-

-GROUP_GRAPHS           = YES

-

-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and

-# collaboration diagrams in a style similar to the OMG's Unified Modeling

-# Language.

-

-UML_LOOK               = YES

-

-# If set to YES, the inheritance and collaboration graphs will show the

-# relations between templates and their instances.

-

-TEMPLATE_RELATIONS     = NO

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT

-# tags are set to YES then doxygen will generate a graph for each documented

-# file showing the direct and indirect include dependencies of the file with

-# other documented files.

-

-INCLUDE_GRAPH          = NO

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and

-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each

-# documented header file showing the documented files that directly or

-# indirectly include this file.

-

-INCLUDED_BY_GRAPH      = NO

-

-# If the CALL_GRAPH and HAVE_DOT options are set to YES then

-# doxygen will generate a call dependency graph for every global function

-# or class method. Note that enabling this option will significantly increase

-# the time of a run. So in most cases it will be better to enable call graphs

-# for selected functions only using the \callgraph command.

-

-CALL_GRAPH             = YES

-

-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then

-# doxygen will generate a caller dependency graph for every global function

-# or class method. Note that enabling this option will significantly increase

-# the time of a run. So in most cases it will be better to enable caller

-# graphs for selected functions only using the \callergraph command.

-

-CALLER_GRAPH           = NO

-

-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen

-# will generate a graphical hierarchy of all classes instead of a textual one.

-

-GRAPHICAL_HIERARCHY    = YES

-

-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES

-# then doxygen will show the dependencies a directory has on other directories

-# in a graphical way. The dependency relations are determined by the #include

-# relations between the files in the directories.

-

-DIRECTORY_GRAPH        = NO

-

-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images

-# generated by dot. Possible values are svg, png, jpg, or gif.

-# If left blank png will be used.

-

-DOT_IMAGE_FORMAT       = png

-

-# The tag DOT_PATH can be used to specify the path where the dot tool can be

-# found. If left blank, it is assumed the dot tool can be found in the path.

-

-DOT_PATH               =

-

-# The DOTFILE_DIRS tag can be used to specify one or more directories that

-# contain dot files that are included in the documentation (see the

-# \dotfile command).

-

-DOTFILE_DIRS           =

-

-# The MSCFILE_DIRS tag can be used to specify one or more directories that

-# contain msc files that are included in the documentation (see the

-# \mscfile command).

-

-MSCFILE_DIRS           =

-

-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of

-# nodes that will be shown in the graph. If the number of nodes in a graph

-# becomes larger than this value, doxygen will truncate the graph, which is

-# visualized by representing a node as a red box. Note that doxygen if the

-# number of direct children of the root node in a graph is already larger than

-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note

-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.

-

-DOT_GRAPH_MAX_NODES    = 20

-

-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the

-# graphs generated by dot. A depth value of 3 means that only nodes reachable

-# from the root by following a path via at most 3 edges will be shown. Nodes

-# that lay further from the root node will be omitted. Note that setting this

-# option to 1 or 2 may greatly reduce the computation time needed for large

-# code bases. Also note that the size of a graph can be further restricted by

-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.

-

-MAX_DOT_GRAPH_DEPTH    = 3

-

-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent

-# background. This is disabled by default, because dot on Windows does not

-# seem to support this out of the box. Warning: Depending on the platform used,

-# enabling this option may lead to badly anti-aliased labels on the edges of

-# a graph (i.e. they become hard to read).

-

-DOT_TRANSPARENT        = YES

-

-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output

-# files in one run (i.e. multiple -o and -T options on the command line). This

-# makes dot run faster, but since only newer versions of dot (>1.8.10)

-# support this, this feature is disabled by default.

-

-DOT_MULTI_TARGETS      = YES

-

-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will

-# generate a legend page explaining the meaning of the various boxes and

-# arrows in the dot generated graphs.

-

-GENERATE_LEGEND        = YES

-

-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will

-# remove the intermediate dot files that are used to generate

-# the various graphs.

-

-DOT_CLEANUP            = YES

-

+# Doxyfile 1.8.2
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a hash (#) is considered a comment and will be ignored.
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or sequence of words) that should
+# identify the project. Note that if you do not use Doxywizard you need
+# to put quotes around the project name if it contains spaces.
+
+PROJECT_NAME           = ChibiOS/GFX
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         = 1.3
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer
+# a quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify an logo or icon that is
+# included in the documentation. The maximum height of the logo should not
+# exceed 55 pixels and the maximum width should not exceed 200 pixels.
+# Doxygen will copy the logo to the output directory.
+
+PROJECT_LOGO           = docs/rsc/logo.png 
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = docs
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = YES
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip. Note that you specify absolute paths here, but also
+# relative paths, which will be relative from the directory where doxygen is
+# started.
+
+STRIP_FROM_PATH        = "C:/Documents and Settings/Administrator/"
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful if your file system
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = NO
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 2
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                = "iclass=@par Function Class:\n This is an                           <b>I-Class</b> API, this function can be                           invoked from within a system lock zone by both                           threads and interrupt handlers." \
+                         "sclass=@par Function Class:\n This is an                           <b>S-Class</b> API, this function can be                           invoked from within a system lock zone by threads                           only." \
+                         "api=@par Function Class:\n Normal API, this                           function can be invoked by regular system threads                           but not from within a lock zone." \
+                         "notapi=@par Function Class:\n Not an API, this                           function is for internal use only." \
+                         "isr=@par Function Class:\n Interrupt handler,                           this function should not be directly invoked." \
+                         "init=@par Function Class:\n Initializer, this                           function just initializes an object and can be                           invoked before the kernel is initialized." \
+                         "special=@par Function Class:\n Special function,                           this function has special requirements see the                           notes."
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding
+# "class=itcl::class" will allow you to use the command class in the
+# itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension,
+# and language is one of the parsers supported by doxygen: IDL, Java,
+# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C,
+# C++. For instance to make doxygen treat .inc files as Fortran files (default
+# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note
+# that for custom extensions you also need to set FILE_PATTERNS otherwise the
+# files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
+# comments according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you
+# can mix doxygen, HTML, and XML commands with Markdown formatting.
+# Disable only in case of backward compatibilities issues.
+
+MARKDOWN_SUPPORT       = YES
+
+# When enabled doxygen tries to link words that correspond to documented classes,
+# or namespaces to their corresponding documentation. Such a link can be
+# prevented in individual cases by by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also makes the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
+# unions are shown inside the group in which they are included (e.g. using
+# @ingroup) instead of on a separate page (for HTML and Man pages) or
+# section (for LaTeX and RTF).
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
+# unions with only public data fields will be shown inline in the documentation
+# of the scope in which they are defined (i.e. file, namespace, or group
+# documentation), provided this scope is documented. If set to NO (the default),
+# structs, classes, and unions are shown on a separate page (for HTML and Man
+# pages) or section (for LaTeX and RTF).
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penalty.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will roughly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+
+SYMBOL_CACHE_SIZE      = 0
+
+# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
+# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
+# their name and scope. Since this can be an expensive process and often the
+# same symbol appear multiple times in the code, doxygen keeps a cache of
+# pre-resolved symbols. If the cache is too small doxygen will become slower.
+# If the cache is too large, memory is wasted. The cache size is given by this
+# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
+# scope will be included in the documentation.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = NO
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespaces are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = YES
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = YES
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = NO
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
+# do proper type resolution of all parameters of a function it will reject a
+# match between the prototype and the implementation of a member function even
+# if there is only one candidate or it is obvious which candidate to choose
+# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
+# will still accept a match between prototype and implementation in such cases.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or macro consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and macros in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = docs/rsc/layout.xml
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files
+# containing the references data. This must be a list of .bib files. The
+# .bib extension is automatically appended if omitted. Using this command
+# requires the bibtex tool to be installed. See also
+# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
+# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
+# feature you need bibtex and perl available in the search path.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# The WARN_NO_PARAMDOC option can be enabled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  =
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
+# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
+# *.f90 *.f *.for *.vhd *.vhdl
+
+FILE_PATTERNS          =
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty or if
+# non of the patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
+# and it is also possible to disable source filtering for a specific pattern
+# using *.ext= (so without naming a filter). This option only has effect when
+# FILTER_SOURCE_FILES is enabled.
+
+FILTER_SOURCE_PATTERNS =
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = NO
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header. Note that when using a custom header you are responsible
+#  for the proper inclusion of any scripts and style sheets that doxygen
+# needs, which is dependent on the configuration options used.
+# It is advised to generate a default header using "doxygen -w html
+# header.html footer.html stylesheet.css YourConfigFile" and then modify
+# that header. Note that the header is subject to change so you typically
+# have to redo this when upgrading to a newer version of doxygen or when
+# changing the value of configuration settings such as GENERATE_TREEVIEW!
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If left blank doxygen will
+# generate a default style sheet. Note that it is recommended to use
+# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this
+# tag will in the future become obsolete.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional
+# user-defined cascading style sheet that is included after the standard
+# style sheets created by doxygen. Using this option one can overrule
+# certain style aspects. This is preferred over using HTML_STYLESHEET
+# since it does not replace the standard style sheet and is therefor more
+# robust against future updates. Doxygen will copy the style sheet file to
+# the output directory.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that
+# the files will be copied as-is; there are no commands or markers available.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the style sheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely
+# identify the documentation publisher. This should be a reverse domain-name
+# style string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               = ChibiOS-GFX.chm
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           = "\"C:/Program Files/HTML Help Workshop/hhc.exe\""
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
+# at top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it. Since the tabs have the same information as the
+# navigation tree you can set this option to NO if you already set
+# GENERATE_TREEVIEW to YES.
+
+DISABLE_INDEX          = NO
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+# Since the tree basically has the same information as the tab index you
+# could consider to set DISABLE_INDEX to NO when enabling this option.
+
+GENERATE_TREEVIEW      = YES
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
+# (range [0,1..20]) that doxygen will group on one line in the generated HTML
+# documentation. Note that a value of 0 will completely suppress the enum
+# values from appearing in the overview section.
+
+ENUM_VALUES_PER_LINE   = 4
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
+# (see http://www.mathjax.org) which uses client side Javascript for the
+# rendering instead of using prerendered bitmaps. Use this if you do not
+# have LaTeX installed or if you want to formulas look prettier in the HTML
+# output. When enabled you may also need to install MathJax separately and
+# configure the path to it using the MATHJAX_RELPATH option.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you need to specify the location relative to the
+# HTML output directory using the MATHJAX_RELPATH option. The destination
+# directory should contain the MathJax.js script. For instance, if the mathjax
+# directory is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to
+# the MathJax Content Delivery Network so you can quickly see the result without
+# installing MathJax.
+# However, it is strongly recommended to install a local
+# copy of MathJax from http://www.mathjax.org before deployment.
+
+MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
+# names that should be enabled during MathJax rendering.
+
+MATHJAX_EXTENSIONS     =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvantages are that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
+# the generated latex document. The footer should contain everything after
+# the last chapter. If it is left blank doxygen will generate a
+# standard footer. Notice: only use this tag if you know what you are doing!
+
+LATEX_FOOTER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
+# http://en.wikipedia.org/wiki/BibTeX for more info.
+
+LATEX_BIB_STYLE        = plain
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = NO
+
+# Load style sheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# pointed to by INCLUDE_PATH will be searched when a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition that
+# overrules the definition found in the source code.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all references to function-like macros
+# that are alone on a line, have an all uppercase name, and do not end with a
+# semicolon, because these will confuse the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = NO
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles. For each
+# tag file the location of the external documentation should be added. The
+# format of a tag file without this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths
+# or URLs. Note that each tag file must have a unique name (where the name does
+# NOT include the path). If a tag file is not located in the directory in which
+# doxygen is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option also works with HAVE_DOT disabled, but it is recommended to
+# install and use dot, since it yields more powerful graphs.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will use the Helvetica font for all dot files that
+# doxygen generates. When you want a differently looking font you can specify
+# the font name using DOT_FONTNAME. You need to make sure dot is able to find
+# the font, which can be done by putting it in a standard location or by setting
+# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
+# directory containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 8
+
+# By default doxygen will tell dot to use the Helvetica font.
+# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
+# set the path where dot can find it.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = YES
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside
+# the class node. If there are many fields or methods and many nodes the
+# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
+# threshold limits the number of items for each type to make the size more
+# managable. Set this to 0 for no limit. Note that the threshold may be
+# exceeded by 50% before the limit is enforced.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will generate a graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are svg, png, jpg, or gif.
+# If left blank png will be used. If you choose svg you need to set
+# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible in IE 9+ (other browsers do not have this requirement).
+
+DOT_IMAGE_FORMAT       = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+# Note that this requires a modern browser other than Internet Explorer.
+# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
+# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
+# visible. Older versions of IE do not have SVG support.
+
+INTERACTIVE_SVG        = NO
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the
+# \mscfile command).
+
+MSCFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 20
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 3
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES