First version vs1053 audio play driver. Compiles but not tested yet.

9 files changed, 660 insertions, 1 deletions

diff --git a/boards/base/Mikromedia-STM32-M4-ILI9341/board.mk b/boards/base/Mikromedia-STM32-M4-ILI9341/board.mk
index e466621c..b18bf8f5 100644
--- a/boards/base/Mikromedia-STM32-M4-ILI9341/board.mk
+++ b/boards/base/Mikromedia-STM32-M4-ILI9341/board.mk
@@ -3,3 +3,4 @@ GFXSRC  +=
 GFXDEFS += -DGFX_USE_OS_CHIBIOS=TRUE
 include $(GFXLIB)/drivers/gdisp/ILI9341/gdisp_lld.mk
 include $(GFXLIB)/drivers/ginput/touch/MCU/ginput_lld.mk
+include $(GFXLIB)/drivers/gaudio/vs1053/driver.mk
diff --git a/boards/base/Mikromedia-STM32-M4-ILI9341/gaudio_play_board.h b/boards/base/Mikromedia-STM32-M4-ILI9341/gaudio_play_board.h
new file mode 100644
index 00000000..9b16b27a
--- /dev/null
+++ b/boards/base/Mikromedia-STM32-M4-ILI9341/gaudio_play_board.h
@@ -0,0 +1,97 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef GAUDIO_PLAY_BOARD_H
+#define GAUDIO_PLAY_BOARD_H
+
+#define SET_CS		palSetPad(GPIOC, GPIOC_MP3_CS)
+#define CLR_CS		palClearPad(GPIOC, GPIOC_MP3_CS)
+#define SET_RST		palSetPad(GPIOC, GPIOC_MP3_RST)
+#define CLR_RST		palClearPad(GPIOC, GPIOC_MP3_RST)
+#define SET_DCS		palSetPad(GPIOC, GPIOC_MP3_DCS)
+#define CLR_DCS		palClearPad(GPIOC, GPIOC_MP3_DCS)
+#define GET_DREQ	palReadPad(GPIOC, GPIOC_MP3_DREQ)
+#define SPI_PORT	&SPID3
+
+static const SPIConfig spicfg_init = {
+    0,
+	GPIOC,
+	GPIOC_MP3_CS,
+    SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0,
+};
+
+static const SPIConfig spicfg = {
+    0,
+	GPIOC,
+	GPIOC_MP3_CS,
+    0,
+};
+
+// Initialise the board
+static inline void board_init(void) {
+	palSetPadMode(GPIOC, GPIOC_MP3_CS, PAL_MODE_OUTPUT_PUSHPULL);
+	palSetPadMode(GPIOC, GPIOC_MP3_RST, PAL_MODE_OUTPUT_PUSHPULL);
+	palSetPadMode(GPIOC, GPIOC_MP3_DCS, PAL_MODE_OUTPUT_PUSHPULL);
+	palSetPadMode(GPIOC, GPIOC_MP3_DREQ, PAL_MODE_INPUT);
+	SET_CS; SET_RST; SET_DCS;
+	spiStart(SPI_PORT, &spicfg_init);
+}
+
+// Chip is initialised enough so we can talk fast to it
+#define board_init_end()	spiStart(SPI_PORT, &spicfg)
+
+// Reset the board
+#define board_reset()		{ CLR_RST; gfxSleepMilliseconds(1); SET_RST; }
+
+// Returns the state of the dreq pin
+#define board_dreq()		GET_DREQ
+
+// Start a command write
+static inline void board_startcmdwrite(void) {
+	#if SPI_USE_MUTUAL_EXCLUSION
+		spiAcquireBus(SPI_PORT);
+	#endif
+	CLR_CS;
+}
+
+// End a command write
+static inline void board_endcmdwrite(void) {
+	#if SPI_USE_MUTUAL_EXCLUSION
+		spiReleaseBus(SPI_PORT);
+	#endif
+	SET_CS;
+}
+
+// Start a command read
+#define board_startcmdread()	board_startcmdwrite()
+
+// End a command read
+#define board_endcmdread()		board_endcmdwrite()
+
+// Start a data write
+static inline void board_startdatawrite(void) {
+	#if SPI_USE_MUTUAL_EXCLUSION
+		spiAcquireBus(SPI_PORT);
+	#endif
+	CLR_DCS;
+}
+
+// End a data write
+static inline void board_enddatawrite(void) {
+	#if SPI_USE_MUTUAL_EXCLUSION
+		spiReleaseBus(SPI_PORT);
+	#endif
+	SET_DCS;
+}
+
+// Write data to the SPI port
+#define board_spiwrite(buf, len)	spiSend(SPI_PORT, len, buf)
+
+// Read data from the SPI port
+#define board_spiread(buf, len)		spiReceive(SPI_PORT, len, buf)
+
+#endif	/* GAUDIO_PLAY_BOARD_H */
diff --git a/boards/base/Mikromedia-STM32-M4-ILI9341/readme.txt b/boards/base/Mikromedia-STM32-M4-ILI9341/readme.txt
index 961f9793..d37c58fb 100644
--- a/boards/base/Mikromedia-STM32-M4-ILI9341/readme.txt
+++ b/boards/base/Mikromedia-STM32-M4-ILI9341/readme.txt
@@ -3,7 +3,8 @@ running under ChibiOS with the ILI9341 display.
 
 On this board uGFX currently supports:
 	- GDISP via the ILI9341 display
-	- GINPUT-touch via the MCU driver 
+	- GINPUT-touch via the MCU driver
+	- GAUDIO (play only) via the vs1053 driver 
 
 Note there are two variants of this board - one with the ILI9341 display
 	and an older one with a different display. This one is for the ILI9341 display.
diff --git a/drivers/gaudio/vs1053/driver.mk b/drivers/gaudio/vs1053/driver.mk
new file mode 100644
index 00000000..d0419c80
--- /dev/null
+++ b/drivers/gaudio/vs1053/driver.mk
@@ -0,0 +1,7 @@
+# List the required driver.
+GFXSRC += $(GFXLIB)/drivers/gaudio/vs1053/gaudio_play_lld.c
+
+# Required include directories
+GFXINC += $(GFXLIB)/drivers/gaudio/vs1053
+
+GFXDEFS += -DGFX_USE_GTIMER=TRUE
diff --git a/drivers/gaudio/vs1053/gaudio_play_board_template.h b/drivers/gaudio/vs1053/gaudio_play_board_template.h
new file mode 100644
index 00000000..d6125bbc
--- /dev/null
+++ b/drivers/gaudio/vs1053/gaudio_play_board_template.h
@@ -0,0 +1,71 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef GAUDIO_PLAY_BOARD_H
+#define GAUDIO_PLAY_BOARD_H
+
+// Initialise the board
+static void board_init(void) {
+
+}
+
+// Chip is initialised enough so we can talk fast to it
+static void board_init_end(void) {
+
+}
+
+// Reset the board
+static void board_reset(void) {
+
+}
+
+// Returns the state of the dreq pin
+static bool board_dreq(void) {
+
+}
+
+// Start a command write
+static void board_startcmdwrite(void) {
+
+}
+
+// End a command write
+static void board_endcmdwrite(void) {
+
+}
+
+// Start a command read
+static void board_startcmdread(void) {
+
+}
+
+// End a command read
+static void board_endcmdread(void) {
+
+}
+
+// Start a data write
+static void board_startdatawrite(void) {
+
+}
+
+// End a data write
+static void board_enddatawrite(void) {
+
+}
+
+// Write data to the SPI port
+static void board_spiwrite(const uint8_t *buf, unsigned len) {
+
+}
+
+// Read data from the SPI port
+static void board_spiread(uint8_t *buf, unsigned len) {
+
+}
+
+#endif	/* GAUDIO_PLAY_BOARD_H */
diff --git a/drivers/gaudio/vs1053/gaudio_play_config.h b/drivers/gaudio/vs1053/gaudio_play_config.h
new file mode 100644
index 00000000..bd2af503
--- /dev/null
+++ b/drivers/gaudio/vs1053/gaudio_play_config.h
@@ -0,0 +1,29 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef GAUDIO_PLAY_CONFIG_H
+#define GAUDIO_PLAY_CONFIG_H
+
+#if GFX_USE_GAUDIO && GAUDIO_NEED_PLAY
+
+/*===========================================================================*/
+/* Driver hardware support.                                                  */
+/*===========================================================================*/
+
+#define GAUDIO_PLAY_MAX_SAMPLE_FREQUENCY		48000
+#define GAUDIO_PLAY_NUM_FORMATS					2
+#define GAUDIO_PLAY_FORMAT1						ARRAY_DATA_16BITSIGNED
+#define GAUDIO_PLAY_FORMAT2						ARRAY_DATA_8BITUNSIGNED
+#define GAUDIO_PLAY_NUM_CHANNELS				2
+#define GAUDIO_PLAY_CHANNEL0_IS_STEREO			FALSE
+#define GAUDIO_PLAY_CHANNEL1_IS_STEREO			TRUE
+#define	GAUDIO_PLAY_MONO						0
+#define	GAUDIO_PLAY_STEREO						1
+
+#endif	/* GFX_USE_GAUDIO && GAUDIO_NEED_PLAY */
+
+#endif	/* GAUDIO_PLAY_CONFIG_H */
diff --git a/drivers/gaudio/vs1053/gaudio_play_lld.c b/drivers/gaudio/vs1053/gaudio_play_lld.c
new file mode 100644
index 00000000..9e77e383
--- /dev/null
+++ b/drivers/gaudio/vs1053/gaudio_play_lld.c
@@ -0,0 +1,348 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#include "gfx.h"
+
+#if GFX_USE_GAUDIO && GAUDIO_NEED_PLAY
+
+/* Include the driver defines */
+#include "src/gaudio/driver_play.h"
+
+/* Include the vs1053 registers */
+#include "drivers/gaudio/vs1053/vs1053.h"
+
+/* Include the board interface */
+#include "gaudio_play_board.h"
+
+// Override-able parameters
+#ifndef VS1053_CLK
+	#define VS1053_CLK		12288000
+#endif
+#ifndef VS1053_FIRMWARE_PATCH
+	#define VS1053_FIRMWARE_PATCH		FALSE
+#endif
+
+// Load the patch file if desired. New format patches only.
+#if VS1053_FIRMWARE_PATCH
+	#define SKIP_PLUGIN_VARNAME
+	static const uint16_t plugin[] = { /* Compressed plugin */
+		#include "vs1053_patch.plg"
+	};
+#endif
+
+// Set various stuff based on the clock
+#if VS1053_CLK >= 16192000
+	#define	SCI_MODE_STARTUP	(SCI_MODE_DEFAULTS|SM_CLK_RANGE)
+	#define VS1053_CLKI			(VS1053_CLK/2)
+#else
+	#define	SCI_MODE_STARTUP	(SCI_MODE_DEFAULTS)
+	#define VS1053_CLKI			(VS1053_CLK)
+#endif
+#if VS1053_CLKI > 13000000 || VS1053_CLKI < 12000000
+	#error "GAUDIO(vs1053): VS1053_CLK is out of range"
+#endif
+#if VS1053_CLKI == 12288000
+	#define	SC_FREQ_ADJUST		0x0000
+#else
+	#define	SC_FREQ_ADJUST		((VS1053_CLKI-8000000)/4000)
+#endif
+#define VS1053_MAX_SAMPLE_RATE	(VS1053_CLKI/256)
+#if VS1053_CLKI > 1228800
+	#define SC_CLOCK_MODE		(SC_MULT_3|SC_ADD_1|SC_FREQ_ADJUST)
+#else
+	#define SC_CLOCK_MODE		(SC_MULT_3_5|SC_ADD_1|SC_FREQ_ADJUST)
+#endif
+
+// Our static variables
+static bool_t	vs1053_isinit;
+static GTimer	playTimer;
+
+// Some common macro's
+#define waitforready()		while(!board_dreq()) gfxSleepMilliseconds(5)
+
+static void cmd_write(uint16_t addr, uint16_t data) {
+	char	buf[4];
+	buf[0] = 2;
+	buf[1] = (char)addr;
+	buf[2] = (char)(data >> 8);
+	buf[3] = (char)data;
+
+	waitforready();
+	board_startcmdwrite();
+	board_spiwrite(buf, 4);
+	board_endcmdwrite();
+}
+
+#if VS1053_CLK > 12288000
+	static inline void cmd_writenodreq(uint16_t addr, uint16_t data) {
+		uint8_t	buf[4];
+
+		// This is the same as cmd_write() except for it doesn't wait for dreq first
+		buf[0] = 2;
+		buf[1] = (uint8_t)addr;
+		buf[2] = (uint8_t)(data >> 8);
+		buf[3] = (uint8_t)data;
+
+		board_startcmdwrite();
+		board_spiwrite(buf, 4);
+		board_endcmdwrite();
+	}
+#endif
+
+static uint16_t cmd_read(uint16_t addr) {
+	uint8_t	buf[2];
+
+	buf[0] = 3;
+	buf[1] = (char)addr;
+
+	board_startcmdread();
+	board_spiwrite(buf, 2);
+	board_spiread(buf, 2);
+	board_endcmdread();
+	return (((uint16_t)buf[0])<<8)|buf[1];
+}
+
+static void data_write(const uint8_t *data, unsigned len) {
+	board_startdatawrite();
+	board_spiwrite(data, len);
+	board_enddatawrite();
+}
+
+#if VS1053_FIRMWARE_PATCH
+	static void LoadUserCode(void) {
+		int			i;
+		uint16_t	addr, n, val;
+
+		for(i=0; i<sizeof(plugin)/sizeof(plugin[0]);) {
+			addr = plugin[i++];
+			n = plugin[i++];
+			if (n & 0x8000U) { /* RLE run, replicate n samples */
+				n &= 0x7FFF;
+				val = plugin[i++];
+				while (n--)
+					cmd_write(addr, val);
+			} else {           /* Copy run, copy n samples */
+				while (n--)
+					cmd_write(addr, plugin[i++]);
+			}
+		}
+	}
+#endif
+
+static void vs1053_hard_reset(void) {
+	gtimerInit(&playTimer);
+
+	board_init();
+	board_reset();
+
+	#if VS1053_CLK > 12288000
+		cmd_writenodreq(SCI_MODE, SCI_MODE_STARTUP);	// Set super-clock before dreq
+	#endif
+
+	// Set up registers
+	cmd_write(SCI_MODE, SCI_MODE_STARTUP);			// Set mode
+	cmd_write(SCI_CLOCKF, SC_CLOCK_MODE);			// Set clocks
+	board_init_end();								// Clocks are now set up
+	cmd_write(SCI_BASS, 0x0000);					// No treble or bass boost
+	cmd_write(SCI_VOL, VOL_MAX);					// Maximum volume
+
+	// Load any firmware
+	#if VS1053_FIRMWARE_PATCH
+		LoadUserCode();
+
+		// Reset mode just in case
+		cmd_write(SCI_MODE, SCI_MODE_STARTUP);
+	#endif
+}
+
+static void vs1053_soft_reset(void) {
+	cmd_write(SCI_MODE, cmd_read(SCI_MODE)|SM_RESET);
+	gfxSleepMilliseconds(1);	// Wait for at least 2uS
+	waitforready();
+
+	// Reload any firmware
+	#if VS1053_FIRMWARE_PATCH
+		LoadUserCode();
+
+		// Reset mode just in case
+		cmd_write(SCI_MODE, SCI_MODE_STARTUP);
+	#endif
+}
+
+static uint16_t vs1053_getendbyte(void) {
+	cmd_write(SCI_WRAMADDR, WRAMADDR_EXTRAPARAMS+4);
+	return cmd_read(SCI_WRAM);
+}
+
+static GTimer			playTimer;
+static GDataBuffer		*pplay;
+static size_t			playlen;
+static uint8_t			*pdata;
+
+static void FeedData(void *param) {
+	unsigned	len;
+	(void)		param;
+
+	// While there is data space
+	while (!board_dreq()) {
+
+		// Send up to 32 bytes
+		len = playlen;
+		if (len > 32) len = 32;
+		data_write(pdata, len);
+		pdata += len;
+		playlen -= len;
+
+		// Have we finished the buffer
+		while (!playlen) {
+			gfxSystemLock();
+			gaudioPlayReleaseDataBlockI(pplay);
+
+			// Get a new data buffer
+			if (!(pplay = gaudioPlayGetDataBlockI())) {
+				// We should really only do the play-done when the audio
+				// has really finished playing. Unfortunately there seems
+				// to be no documented way of determining this.
+				gaudioPlayDoneI();
+				gfxSystemUnlock();
+				gtimerStop(&playTimer);
+				return;
+			}
+
+			// Set up ready for the new buffer
+			playlen = pplay->len;
+			pdata = (uint8_t *)(pplay+1);
+			gfxSystemUnlock();
+		}
+	}
+}
+
+/*===========================================================================*/
+/* External declarations.                                                    */
+/*===========================================================================*/
+
+bool_t gaudio_play_lld_init(uint16_t channel, uint32_t frequency, ArrayDataFormat format) {
+	uint32_t	brate;
+	uint32_t	bps;
+	uint8_t		buf[4];
+	static const uint8_t hdr1[] = {
+			'R', 'I', 'F', 'F',
+			0xFF, 0xFF, 0xFF, 0xFF,
+			'W', 'A', 'V', 'E',
+			'f', 'm', 't', ' ',
+			16, 0, 0, 0,
+			0x01, 0x00,
+	};
+	static const uint8_t hdr2[] = {
+			'd', 'a', 't', 'a',
+			0xFF, 0xFF, 0xFF, 0xFF,
+	};
+
+	if (format != ARRAY_DATA_8BITUNSIGNED && format != ARRAY_DATA_16BITSIGNED)
+		return FALSE;
+	if (frequency > VS1053_MAX_SAMPLE_RATE)
+		return FALSE;
+
+	// Reset the chip if needed
+	if (!vs1053_isinit) {
+		vs1053_hard_reset();
+		vs1053_isinit = TRUE;
+	}
+
+	// Setup
+	bps = (gfxSampleFormatBits(format)+7)/8;
+	if (channel == GAUDIO_PLAY_STEREO)
+		bps *= 2;
+	brate = frequency * bps;
+
+	// Write the RIFF header
+	waitforready();
+	data_write(hdr1, sizeof(hdr1));
+	buf[0] = channel == GAUDIO_PLAY_STEREO ? 2 : 1;		buf[1] = 0;								data_write(buf, 2);
+	buf[0] = frequency;	buf[1] = frequency>>8;	buf[2] = frequency>>16; buf[3] = frequency>>24;	data_write(buf, 4);
+	buf[0] = brate;		buf[1] = brate>>8;		buf[2] = brate>>16;		buf[3] = brate>>24;		data_write(buf, 4);
+	waitforready();						// 32 bytes max before checking
+	buf[0] = bps; 										buf[1] = 0;								data_write(buf, 2);
+	buf[0] = gfxSampleFormatBits(format);				buf[1] = 0;								data_write(buf, 2);
+	data_write(hdr2, sizeof(hdr2));
+	return TRUE;
+}
+
+bool_t gaudio_play_lld_set_volume(uint8_t vol) {
+	// Volume is 0xFE -> 0x00. Adjust vol to match
+	vol = ~vol;
+	if (vol == 0xFF) vol = 0xFE;
+
+	cmd_write(SCI_VOL, ((uint16_t)vol) << 8 | vol);
+	return TRUE;
+}
+
+void gaudio_play_lld_start(void) {
+
+	gfxSystemLock();
+	// Get a new data buffer
+	if (pplay || !(pplay = gaudioPlayGetDataBlockI())) {
+		gfxSystemUnlock();			// Nothing to do
+		return;
+	}
+
+	// Set up ready for the new buffer
+	playlen = pplay->len;
+	pdata = (uint8_t *)(pplay+1);
+	gfxSystemUnlock();
+
+	// Start the playing by starting the timer and executing FeedData immediately just to get things started
+	// We really should set the timer to be equivalent to half the available data but that is just too hard to calculate.
+	gtimerStart(&playTimer, FeedData, 0, TRUE, 5);
+	FeedData(0);
+}
+
+void gaudio_play_lld_stop(void) {
+	uint8_t		ch;
+	unsigned	i;
+
+	// Stop the timer interrupt
+	gtimerStop(&playTimer);
+
+	// We may need to clean up the remaining buffer.
+	gfxSystemLock();
+	if (pplay) {
+		gaudioPlayReleaseDataBlockI(pplay);
+		pplay = 0;
+		gaudioPlayDoneI();
+	}
+	gfxSystemUnlock();
+
+	// Set CANCEL
+	cmd_write(SCI_MODE, cmd_read(SCI_MODE)|SM_CANCEL);
+
+	// Write up to 2048 bytes of data
+	ch = 0;
+	for(i = 0; i < 2048; i++) {
+		if (!(i & 0x1F)) {
+			waitforready();
+			if (!(cmd_read(SCI_MODE) & SM_CANCEL))
+				break;
+		}
+		data_write(&ch, 1);
+	}
+
+	// Make sure the cancel worked
+	waitforready();
+	if ((cmd_read(SCI_MODE) & SM_CANCEL))
+		vs1053_soft_reset();
+
+	// Send the terminating data
+	ch = vs1053_getendbyte();
+	for(i = 0; i < 2052; i++) {
+		if (!(i & 0x1F))
+			waitforready();
+		data_write(&ch, 1);
+	}
+}
+
+#endif /* GFX_USE_GAUDIO && GAUDIO_NEED_PLAY */
diff --git a/drivers/gaudio/vs1053/readme.txt b/drivers/gaudio/vs1053/readme.txt
new file mode 100644
index 00000000..6e99e56f
--- /dev/null
+++ b/drivers/gaudio/vs1053/readme.txt
@@ -0,0 +1,4 @@
+This chip supports playing in many formats including MP3 etc.
+For this driver however we only support PCM in 8 bit unisgned and 16 bit signed formats.
+
+Requires GFX_USE_GTIMER
\ No newline at end of file
diff --git a/drivers/gaudio/vs1053/vs1053.h b/drivers/gaudio/vs1053/vs1053.h
new file mode 100644
index 00000000..1ae613be
--- /dev/null
+++ b/drivers/gaudio/vs1053/vs1053.h
@@ -0,0 +1,101 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _VS1053_H
+#define _VS1053_H
+
+// Registers
+#define SCI_MODE			0x00
+	#define SM_DIFF				0x0001
+	#define SM_LAYER12			0x0002
+	#define SM_RESET			0x0004
+	#define SM_CANCEL			0x0008
+	#define SM_EARSPEAKER_LO	0x0010
+	#define SM_TESTS			0x0020
+	#define SM_STREAM			0x0040
+	#define SM_EARSPEAKER_HI	0x0080
+	#define SM_DACT				0x0100
+	#define SM_SDIORD			0x0200
+	#define SM_SDISHARE			0x0400
+	#define SM_SDINEW			0x0800
+	#define SM_ADPCM			0x1000
+	#define SM_LINE1			0x4000
+	#define SM_CLK_RANGE		0x8000
+	#define SCI_MODE_DEFAULTS	(SM_LINE1|SM_SDINEW)
+#define SCI_STATUS			0x01
+	#define SS_DO_NOT_JUMP		0x8000
+	#define SS_SWING_MASK		0x7000
+	#define SS_SWING_SHIFT		12
+	#define SS_VCM_OVERLOAD		0x0800
+	#define SS_VCM_DISABLE		0x0400
+	#define SS_VER_MASK			0x00F0
+	#define SS_VER_SHIFT		4
+	#define SS_APDOWN2			0x0008
+	#define SS_APDOWN1			0x0004
+	#define SS_SS_AD_CLOCK		0x0002
+	#define SS_REFERENCE_SEL	0x0001
+#define SCI_BASS			0x02
+	#define ST_AMPLITUDE_MASK	0xF000
+	#define ST_AMPLITUDE_SHIFT	12
+	#define ST_FREQLIMIT_MASK	0x0F00
+	#define ST_FREQLIMIT_SHIFT	8
+	#define SB_AMPLITUDE_MASK	0x00F0
+	#define SB_AMPLITUDE_SHIFT	4
+	#define SB_FREQLIMIT_MASK	0x000F
+	#define SB_FREQLIMIT_SHIFT	0
+#define SCI_CLOCKF			0x03
+	#define SC_MULT_1			0x0000
+	#define SC_MULT_2			0x2000
+	#define SC_MULT_2_5			0x4000
+	#define SC_MULT_3			0x6000
+	#define SC_MULT_3_5			0x8000
+	#define SC_MULT_4			0xa000
+	#define SC_MULT_4_5			0xc000
+	#define SC_MULT_5			0xe000
+	#define SC_ADD_NONE			0x0000
+	#define SC_ADD_1			0x0800
+	#define SC_ADD_1_5			0x1000
+	#define SC_ADD_2			0x1800
+	#define SC_FREQ_MASK		0x07FF
+#define SCI_DECODE_TIME		0x04
+#define SCI_AUDATA			0x05
+	#define SR_RATE_MASK		0xFFFE
+	#define SR_IS_STEREO		0x0001
+#define SCI_WRAM			0x06
+#define SCI_WRAMADDR		0x07
+	#define WRAMADDR_XDATA		0x1800
+	#define WRAMADDR_YDATA		0x5800
+	#define WRAMADDR_INSTR		0x8040
+	#define WRAMADDR_IO			0xC000
+	#define WRAMADDR_EXTRAPARAMS	0x1E02
+#define SCI_HDAT0			0x08
+#define SCI_HDAT1			0x09
+	#define HD_FMT_NONE			0x0000
+	#define HD_FMT_WAV			0x7665
+	#define HD_FMT_AAC_ADTS		0x4154
+	#define HD_FMT_AAC_ADIF		0x4144
+	#define HD_FMT_AAC_M4A		0x4D34
+	#define HD_FMT_WMA			0x574D
+	#define HD_FMT_MIDI			0x4D54
+	#define HD_FMT_OGG			0x4F67
+	#define HD_FMT_MP3_MIN		0xFFE0
+	#define HD_FMT_MP3_MAX		0xFFFF
+#define SCI_AIADDR			0x0A
+#define SCI_VOL				0x0B
+	#define VOL_LEFT_MASK		0xFF00
+	#define VOL_LEFT_SHIFT		8
+	#define VOL_RIGHT_MASK		0x00FF
+	#define VOL_RIGHT_SHIFT		0
+	#define VOL_POWERDOWN		0xFFFF
+	#define VOL_MAX				0x0000
+	#define VOL_MIN				0xFEFE
+#define SCI_AICTRL0			0x0C
+#define SCI_AICTRL1			0x0D
+#define SCI_AICTRL2			0x0E
+#define SCI_AICTRL3			0x0F
+
+#endif /* _VS1053_H */