diff options
Diffstat (limited to 'Projects')
| -rw-r--r-- | Projects/AVRISP/Lib/NVMTarget.c | 35 | ||||
| -rw-r--r-- | Projects/AVRISP/Lib/NVMTarget.h | 2 | ||||
| -rw-r--r-- | Projects/AVRISP/Lib/PDIProtocol.c | 52 |
3 files changed, 84 insertions, 5 deletions
diff --git a/Projects/AVRISP/Lib/NVMTarget.c b/Projects/AVRISP/Lib/NVMTarget.c index c2ed92d2e..d84ae6b85 100644 --- a/Projects/AVRISP/Lib/NVMTarget.c +++ b/Projects/AVRISP/Lib/NVMTarget.c @@ -114,6 +114,10 @@ bool NVMTarget_GetMemoryCRC(uint8_t CRCCommand, uint32_t* CRCDest) NVMTarget_SendNVMRegAddress(NVM_REG_CTRLA);
PDITarget_SendByte(1 << 0);
+ /* Wait until the NVM bus is ready again */
+ if (!(PDITarget_WaitWhileNVMBusBusy()))
+ return false;
+
/* Wait until the NVM controller is no longer busy */
if (!(NVMTarget_WaitWhileNVMControllerBusy()))
return false;
@@ -180,6 +184,37 @@ bool NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t Re return true;
}
+/** Writes byte addressed memory to the target's memory spaces.
+ *
+ * \param[in] WriteCommand Command to send to the device to write each memory page
+ * \param[in] WriteAddress Start address to write to within the target's address space
+ * \param[in] WriteBuffer Buffer to source data from
+ * \param[in] WriteSize Number of bytes to write
+ *
+ * \return Boolean true if the command sequence complete sucessfully
+ */
+bool NVMTarget_WriteByteMemory(uint8_t WriteCommand, uint32_t WriteAddress, uint8_t* WriteBuffer, uint16_t WriteSize)
+{
+ for (uint8_t i = 0; i < WriteSize; i++)
+ {
+ /* Wait until the NVM controller is no longer busy */
+ if (!(NVMTarget_WaitWhileNVMControllerBusy()))
+ return false;
+
+ /* Send the memory write command to the target */
+ PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ NVMTarget_SendNVMRegAddress(NVM_REG_CMD);
+ PDITarget_SendByte(WriteCommand);
+
+ /* Send each new memory byte to the memory to the target */
+ PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ NVMTarget_SendAddress(WriteAddress++);
+ PDITarget_SendByte(*(WriteBuffer++));
+ }
+
+ return true;
+}
+
/** Erases a specific memory space of the target.
*
* \param[in] EraseCommand NVM erase command to send to the device
diff --git a/Projects/AVRISP/Lib/NVMTarget.h b/Projects/AVRISP/Lib/NVMTarget.h index dae55ed12..dea9ff3de 100644 --- a/Projects/AVRISP/Lib/NVMTarget.h +++ b/Projects/AVRISP/Lib/NVMTarget.h @@ -111,6 +111,8 @@ bool NVMTarget_WaitWhileNVMControllerBusy(void);
bool NVMTarget_GetMemoryCRC(uint8_t CRCCommand, uint32_t* CRCDest);
bool NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadSize);
+ bool NVMTarget_WriteByteMemory(uint8_t WriteCommand, uint32_t WriteAddress, uint8_t* WriteBuffer,
+ uint16_t WriteSize);
bool NVMTarget_EraseMemory(uint8_t EraseCommand, uint32_t Address);
#endif
diff --git a/Projects/AVRISP/Lib/PDIProtocol.c b/Projects/AVRISP/Lib/PDIProtocol.c index 46d6dd417..36aa3b4c5 100644 --- a/Projects/AVRISP/Lib/PDIProtocol.c +++ b/Projects/AVRISP/Lib/PDIProtocol.c @@ -162,7 +162,7 @@ static void PDIProtocol_Erase(void) Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
- uint8_t EraseCommand;
+ uint8_t EraseCommand = NVM_CMD_NOOP;
if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_CHIP)
EraseCommand = NVM_CMD_CHIPERASE;
@@ -198,9 +198,10 @@ static void PDIProtocol_WriteMemory(void) struct
{
uint8_t MemoryType;
+ uint8_t PageMode;
uint32_t Address;
uint16_t Length;
- uint8_t ProgData[256];
+ uint8_t ProgData[512];
} WriteMemory_XPROG_Params;
Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) -
@@ -211,11 +212,52 @@ static void PDIProtocol_WriteMemory(void) Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+
+ uint8_t WriteCommand = NVM_CMD_NOOP;
+ uint8_t WritePageCommand = NVM_CMD_NOOP;
+ bool PagedMemory = false;
+
+ if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_APPL)
+ {
+ PagedMemory = true;
+ }
+ else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_BOOT)
+ {
+ PagedMemory = true;
+ }
+ else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_EEPROM)
+ {
+ PagedMemory = true;
+ }
+ else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_USERSIG)
+ {
+ PagedMemory = true;
+ }
+ else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_FUSE)
+ {
+ WriteCommand = NVM_CMD_WRITEFUSE;
+ }
+ else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_LOCKBITS)
+ {
+ WriteCommand = NVM_CMD_WRITELOCK;
+ }
- // TODO: Send program command here via PDI protocol
+ if (PagedMemory)
+ {
+
+ }
+ else
+ {
+ if (!(NVMTarget_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address, WriteMemory_XPROG_Params.ProgData,
+ WriteMemory_XPROG_Params.Length)))
+ {
+ ReturnStatus = XPRG_ERR_TIMEOUT;
+ }
+ }
Endpoint_Write_Byte(CMD_XPROG);
- Endpoint_Write_Byte(XPRG_CMD_READ_MEM);
+ Endpoint_Write_Byte(XPRG_CMD_WRITE_MEM);
Endpoint_Write_Byte(ReturnStatus);
Endpoint_ClearIN();
}
@@ -272,8 +314,8 @@ static void PDIProtocol_ReadCRC(void) Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+ uint8_t CRCCommand = NVM_CMD_NOOP;
uint32_t MemoryCRC;
- uint8_t CRCCommand;
if (ReadCRC_XPROG_Params.CRCType == XPRG_CRC_APP)
CRCCommand = NVM_CMD_APPCRC;
|