diff options
Diffstat (limited to 'Projects')
| -rw-r--r-- | Projects/AVRISP/AVRISP.c | 15 | ||||
| -rw-r--r-- | Projects/AVRISP/AVRISP.h | 10 | ||||
| -rw-r--r-- | Projects/AVRISP/AVRISP.txt | 10 | ||||
| -rw-r--r-- | Projects/AVRISP/makefile | 3 |
4 files changed, 31 insertions, 7 deletions
diff --git a/Projects/AVRISP/AVRISP.c b/Projects/AVRISP/AVRISP.c index f14b6545a..d4ae910f6 100644 --- a/Projects/AVRISP/AVRISP.c +++ b/Projects/AVRISP/AVRISP.c @@ -35,7 +35,6 @@ */
// TODO: Add in software SPI for lower programming speeds below 125KHz
-// TODO: Add in VTARGET detection
// TODO: Add reversed target connector checks
#include "AVRISP.h"
@@ -53,7 +52,12 @@ int main(void) for (;;)
{ - Process_AVRISP_Commands(); + Process_AVRISP_Commands();
+
+ #if defined(ADC)
+ /* Update VTARGET parameter with the latest ADC conversion of VTARGET on supported AVR models */
+ V2Params_SetParameterValue(PARAM_VTARGET, ((5 * 10 * ADC_GetResult()) / 1024));
+ #endif USB_USBTask();
}
@@ -73,6 +77,13 @@ void SetupHardware(void) LEDs_Init();
USB_Init();
+ #if defined(ADC)
+ /* Initialize the ADC converter for VTARGET level detection on supported AVR models */
+ ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128);
+ ADC_SetupChannel(VTARGET_ADC_CHANNEL);
+ ADC_StartReading(VTARGET_ADC_CHANNEL | ADC_RIGHT_ADJUSTED | ADC_REFERENCE_AVCC);
+ #endif
+
/* Millisecond timer initialization for timeout checking */
OCR0A = ((F_CPU / 64) / 1000);
TCCR0A = (1 << WGM01);
diff --git a/Projects/AVRISP/AVRISP.h b/Projects/AVRISP/AVRISP.h index d37bf5320..e17fe3009 100644 --- a/Projects/AVRISP/AVRISP.h +++ b/Projects/AVRISP/AVRISP.h @@ -46,8 +46,12 @@ #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
- #include <LUFA/Drivers/USB/USB.h> - + #include <LUFA/Drivers/USB/USB.h>
+
+ #if defined(ADC) + #include <LUFA/Drivers/Peripheral/ADC.h>
+ #endif
+ #include "Lib/V2Protocol.h"
/* Macros: */ @@ -61,7 +65,7 @@ #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
- #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
+ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Function Prototypes: */
void SetupHardware(void);
diff --git a/Projects/AVRISP/AVRISP.txt b/Projects/AVRISP/AVRISP.txt index e26cfb11e..8d299e25a 100644 --- a/Projects/AVRISP/AVRISP.txt +++ b/Projects/AVRISP/AVRISP.txt @@ -60,9 +60,12 @@ *
* Note that this design currently has several limitations:
* - Minimum target clock speed of 500KHz due to hardware SPI used
- * - No VTARGET detection and notification
* - No reversed/shorted target connector detection and notification
*
+ * On AVR models with an ADC converter, ACC should be tied to 5V (e.g. VBUS) and the VTARGET_ADC_CHANNEL token should be
+ * set to an appropriate ADC channel number in the project makefile for VTARGET detection to operate correctly. On models
+ * without an ADC converter, VTARGET will report at a fixed 5V level.
+ *
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
@@ -88,5 +91,10 @@ * <td>Makefile CDEFS</td>
* <td>Mask for the programmer's target RESET line on the chosen port.</td>
* </tr>
+ * <tr>
+ * <td>VTARGET_ADC_CHANNEL</td>
+ * <td>Makefile CDEFS</td>
+ * <td>ADC channel number (on supported AVRs) to use for VTARGET level detection.</td>
+ * </tr>
* </table>
*/
diff --git a/Projects/AVRISP/makefile b/Projects/AVRISP/makefile index 84ca93ab6..5ea1176b6 100644 --- a/Projects/AVRISP/makefile +++ b/Projects/AVRISP/makefile @@ -60,7 +60,7 @@ # MCU name
-MCU = at90usb647
+MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
@@ -197,6 +197,7 @@ CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA CDEFS += -DRESET_LINE_PORT=PORTB
CDEFS += -DRESET_LINE_DDR=DDRB
CDEFS += -DRESET_LINE_MASK="(1 << 4)"
+CDEFS += -DVTARGET_ADC_CHANNEL=2
# Place -D or -U options here for ASM sources
|