diff options
Diffstat (limited to 'Projects/AVRISP-MKII/AVRISPDescriptors.c')
| -rw-r--r-- | Projects/AVRISP-MKII/AVRISPDescriptors.c | 105 |
1 files changed, 3 insertions, 102 deletions
diff --git a/Projects/AVRISP-MKII/AVRISPDescriptors.c b/Projects/AVRISP-MKII/AVRISPDescriptors.c index cb18a82c2..58a92078b 100644 --- a/Projects/AVRISP-MKII/AVRISPDescriptors.c +++ b/Projects/AVRISP-MKII/AVRISPDescriptors.c @@ -37,17 +37,6 @@ #include "AVRISPDescriptors.h" -#if defined(RESET_TOGGLES_LIBUSB_COMPAT) || defined(__DOXYGEN__) - /** Indicates if an external reset has occurred and the compatibility mode needs to be altered */ - static bool AVRISP_NeedCompatibilitySwitch ATTR_NO_INIT; - - /** Current AVRISP data IN endpoint address. */ - uint8_t AVRISP_CurrDataINEndpointAddress; - - /** Saved AVRISP data IN endpoint address in EEPROM. */ - uint8_t AVRISP_CurrDataINEndpointAddress_EEPROM EEMEM; -#endif - /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the * number of device configurations. The descriptor is read out by the USB host when the enumeration @@ -80,7 +69,7 @@ const USB_Descriptor_Device_t PROGMEM AVRISP_DeviceDescriptor = * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting * a configuration so that the host may correctly communicate with the USB device. */ -AVRISP_USB_Descriptor_Configuration_t AVRISP_ConfigurationDescriptor = +const AVRISP_USB_Descriptor_Configuration_t PROGMEM AVRISP_ConfigurationDescriptor = { .Config = { @@ -117,11 +106,7 @@ AVRISP_USB_Descriptor_Configuration_t AVRISP_ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, -#if defined(RESET_TOGGLES_LIBUSB_COMPAT) - .EndpointAddress = 0, -#else .EndpointAddress = AVRISP_DATA_IN_EPADDR, -#endif .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AVRISP_DATA_EPSIZE, .PollingIntervalMS = 0x0A @@ -159,7 +144,7 @@ const USB_Descriptor_String_t PROGMEM AVRISP_ProductString = USB_STRING_DESCRIPT /** Serial number string. This is a Unicode string containing the device's unique serial number, expressed as a * series of uppercase hexadecimal digits. */ -USB_Descriptor_String_t AVRISP_SerialString = USB_STRING_DESCRIPTOR(L"000200012345\0" +const USB_Descriptor_String_t PROGMEM AVRISP_SerialString = USB_STRING_DESCRIPTOR(L"000200012345\0" // Note: Real AVRISP-MKII has the embedded NUL byte, bug in firmware? ); @@ -171,8 +156,7 @@ USB_Descriptor_String_t AVRISP_SerialString = USB_STRING_DESCRIPTOR(L"0002000123 */ uint16_t AVRISP_GetDescriptor(const uint16_t wValue, const uint16_t wIndex, - const void** const DescriptorAddress, - uint8_t* DescriptorMemorySpace) + const void** const DescriptorAddress) { const uint8_t DescriptorType = (wValue >> 8); const uint8_t DescriptorNumber = (wValue & 0xFF); @@ -180,8 +164,6 @@ uint16_t AVRISP_GetDescriptor(const uint16_t wValue, const void* Address = NULL; uint16_t Size = NO_DESCRIPTOR; - *DescriptorMemorySpace = MEMSPACE_FLASH; - switch (DescriptorType) { case DTYPE_Device: @@ -189,12 +171,6 @@ uint16_t AVRISP_GetDescriptor(const uint16_t wValue, Size = sizeof(USB_Descriptor_Device_t); break; case DTYPE_Configuration: - *DescriptorMemorySpace = MEMSPACE_RAM; - #if defined(RESET_TOGGLES_LIBUSB_COMPAT) - /* Update the configuration descriptor with the current endpoint address */ - AVRISP_ConfigurationDescriptor.AVRISP_DataInEndpoint.EndpointAddress = AVRISP_CurrDataINEndpointAddress; - #endif - Address = &AVRISP_ConfigurationDescriptor; Size = sizeof(AVRISP_USB_Descriptor_Configuration_t); break; @@ -216,11 +192,6 @@ uint16_t AVRISP_GetDescriptor(const uint16_t wValue, case AVRISP_STRING_ID_Serial: Address = &AVRISP_SerialString; Size = AVRISP_SerialString.Header.Size; - - /* Update serial number to have a different serial based on the current endpoint address */ - ((uint16_t*)&AVRISP_SerialString.UnicodeString)[6] = cpu_to_le16('0' + (AVRISP_DATA_IN_EPADDR & ENDPOINT_EPNUM_MASK)); - - *DescriptorMemorySpace = MEMSPACE_RAM; break; } @@ -230,73 +201,3 @@ uint16_t AVRISP_GetDescriptor(const uint16_t wValue, *DescriptorAddress = Address; return Size; } - -#if defined(RESET_TOGGLES_LIBUSB_COMPAT) || defined(__DOXYGEN__) -/** Checks the state of the system status register MCUSR and indicates via a flag if - * the current AVRISP driver compatibility mode needs to be reset. - * - * When the \c RESET_TOGGLES_LIBUSB_COMPAT compile time option is enabled, pulling - * the reset line of the AVR low will toggle between Jungo and libUSB compatibility - * modes. Other forms of reset (such as power on or watchdog) will not force a mode - * change. - */ -void CheckExternalReset(void) -{ - /* If an external reset occurred, we need to change compatibility mode */ - AVRISP_NeedCompatibilitySwitch = (MCUSR == (1 << EXTRF)); - - MCUSR = 0; -} - -/** Updates the device descriptors so that the correct compatibility mode is used - * when the \c RESET_TOGGLES_LIBUSB_COMPAT compile time option is enabled. This - * configures the programmer for either Jungo or libUSB driver compatibility. Each - * time the AVR is reset via pulling the reset line low the compatibility mode will - * be toggled. The current mode is stored in EEPROM and preserved through power - * cycles of the AVR. - */ -void UpdateCurrentCompatibilityMode(void) -{ - /* Load the current IN endpoint address stored in EEPROM */ - AVRISP_CurrDataINEndpointAddress = eeprom_read_byte(&AVRISP_CurrDataINEndpointAddress_EEPROM); - - /* Check if we need to switch compatibility modes */ - if (AVRISP_NeedCompatibilitySwitch) - { - /* Toggle between compatibility modes */ - AVRISP_CurrDataINEndpointAddress = (AVRISP_CurrDataINEndpointAddress == AVRISP_DATA_IN_EPADDR_LIBUSB) ? - AVRISP_DATA_IN_EPADDR_JUNGO : AVRISP_DATA_IN_EPADDR_LIBUSB; - - /* Save the new mode into EEPROM */ - eeprom_update_byte(&AVRISP_CurrDataINEndpointAddress_EEPROM, AVRISP_CurrDataINEndpointAddress); - } - - LEDs_SetAllLEDs(LEDS_NO_LEDS); - - /* Validate IN endpoint address and indicate current mode via LED flashes */ - switch (AVRISP_CurrDataINEndpointAddress) - { - default: - /* Default to Jungo compatibility mode if saved EEPROM is invalid */ - AVRISP_CurrDataINEndpointAddress = AVRISP_DATA_IN_EPADDR_JUNGO; - case AVRISP_DATA_IN_EPADDR_JUNGO: - /* Two flashes for Jungo compatibility mode */ - for (uint8_t i = 0; i < 4; i++) - { - LEDs_ToggleLEDs(LEDS_ALL_LEDS); - Delay_MS(100); - } - break; - case AVRISP_DATA_IN_EPADDR_LIBUSB: - /* Five flashes for libUSB compatibility mode */ - for (uint8_t i = 0; i < 10; i++) - { - LEDs_ToggleLEDs(LEDS_ALL_LEDS); - Delay_MS(100); - } - break; - } - - Delay_MS(500); -} -#endif |