diff options
Diffstat (limited to 'Demos')
23 files changed, 229 insertions, 184 deletions
diff --git a/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c b/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c index e49281538..312d7166e 100644 --- a/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c +++ b/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c @@ -28,11 +28,11 @@ this software.
*/
-/*
- Bluetooth Dongle host demo application.
-
- ** NOT CURRENTLY FUNCTIONAL - DO NOT USE **
-*/
+/** \file
+ *
+ * Main source file for the BluetoothHost demo. This file contains the main tasks of
+ * the demo and is responsible for the initial application hardware configuration.
+ */
#include "BluetoothHost.h"
@@ -43,23 +43,26 @@ Bluetooth_Device_t Bluetooth_DeviceConfiguration = Name: "LUFA Bluetooth Demo"
};
-
+/** Main program entry point. This routine configures the hardware required by the application, then
+ * enters a loop to run the application tasks in sequence.
+ */
int main(void)
{
SetupHardware();
+
+ puts_P(PSTR(ESC_FG_CYAN "Bluetooth Host Demo running.\r\n" ESC_FG_WHITE));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- puts_P(PSTR(ESC_FG_CYAN "Bluetooth Host Demo running.\r\n" ESC_FG_WHITE));
-
for (;;)
{
Bluetooth_Stack_Task();
- Bluetooth_Management_Task();
+ Bluetooth_Host_Task();
USB_USBTask();
}
}
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
@@ -75,26 +78,34 @@ void SetupHardware(void) USB_Init();
}
+/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
+ * starts the library USB task to begin the enumeration and USB management process.
+ */
void EVENT_USB_Host_DeviceAttached(void)
{
puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
+/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
+ * stops the library USB task management process.
+ */
void EVENT_USB_Host_DeviceUnattached(void)
{
puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
-
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
+/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
+ * enumerated by the host and is now ready to be used by the application.
+ */
void EVENT_USB_Host_DeviceEnumerationComplete(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
-void EVENT_USB_Host_HostError(uint8_t ErrorCode)
+/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
{
USB_ShutDown();
@@ -105,7 +116,10 @@ void EVENT_USB_Host_HostError(uint8_t ErrorCode) for(;;);
}
-void EVENT_USB_Host_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode)
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
+ * enumerating an attached USB device.
+ */
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
{
printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
" -- Error Code %d\r\n"
@@ -115,7 +129,8 @@ void EVENT_USB_Host_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorC LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
-void Bluetooth_Management_Task(void)
+/** Task to set the configuration of the attached device after it has been enumerated. */
+void Bluetooth_Host_Task(void)
{
uint8_t ErrorCode;
@@ -127,7 +142,7 @@ void Bluetooth_Management_Task(void) /* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessDeviceDescriptor()) != SuccessfulDeviceRead)
{
- if (ErrorCode == ControlErrorDuringDeviceRead)
+ if (ErrorCode == DevControlError)
puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));
else
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
@@ -163,7 +178,7 @@ void Bluetooth_Management_Task(void) /* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
- if (ErrorCode == ControlErrorDuringConfigRead)
+ if (ErrorCode == ControlError)
puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
diff --git a/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h b/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h index b5bfa0ef3..a24b67a20 100644 --- a/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h +++ b/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h @@ -28,6 +28,11 @@ this software.
*/
+/** \file
+ *
+ * Header file for BluetoothHost.c.
+ */
+
#ifndef _BLUETOOTH_HOST_H_
#define _BLUETOOTH_HOST_H_
@@ -62,19 +67,15 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
- #define BLUETOOTH_DATA_IN_PIPE 1
- #define BLUETOOTH_DATA_OUT_PIPE 2
- #define BLUETOOTH_EVENTS_PIPE 3
-
/* Task Definitions: */
- void Bluetooth_Management_Task(void);
+ void Bluetooth_Host_Task(void);
/* Event Handlers: */
void EVENT_USB_Host_DeviceAttached(void);
void EVENT_USB_Host_DeviceUnattached(void);
void EVENT_USB_Host_DeviceEnumerationComplete(void);
- void EVENT_USB_Host_HostError(uint8_t ErrorCode);
- void EVENT_USB_Host_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode);
+ void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
+ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
/* Function Prototypes: */
void SetupHardware(void);
diff --git a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c index ba4ac4d3b..4c94eaaba 100644 --- a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c +++ b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c @@ -28,8 +28,23 @@ this software.
*/
+/** \file
+ *
+ * USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
+ * needed to communication with an attached USB device. Descriptors are special computer-readable structures
+ * which the host requests upon device enumeration, to determine the device's capabilities and functions.
+ */
+
#include "ConfigDescriptor.h"
+/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
+ * routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
+ * with compatible devices.
+ *
+ * This routine searches for a BT interface descriptor containing bulk IN and OUT data endpoints.
+ *
+ * \return An error code from the \ref Bluetooth_GetConfigDescriptorDataCodes_t enum.
+ */
uint8_t ProcessConfigurationDescriptor(void)
{
uint8_t ConfigDescriptorData[512];
@@ -47,7 +62,7 @@ uint8_t ProcessConfigurationDescriptor(void) case HOST_GETCONFIG_BuffOverflow:
return DescriptorTooLarge;
default:
- return ControlErrorDuringConfigRead;
+ return ControlError;
}
/* The bluetooth USB transport addendum mandates that the data (not streaming voice) endpoints
@@ -56,7 +71,7 @@ uint8_t ProcessConfigurationDescriptor(void) /* Ensure that an interface was found, and the end of the descriptor was not reached */
if (!(CurrConfigBytesRem))
- return NoInterfaceFound;
+ return NoBTInterfaceFound;
/* Get the data IN, data OUT and event notification endpoints for the bluetooth interface */
while (FoundEndpoints != ((1 << BLUETOOTH_DATA_IN_PIPE) | (1 << BLUETOOTH_DATA_OUT_PIPE) |
@@ -64,7 +79,7 @@ uint8_t ProcessConfigurationDescriptor(void) {
/* Fetch the next endpoint from the current bluetooth interface */
if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
- NextInterfaceBluetoothDataEndpoint))
+ DComp_NextInterfaceBluetoothDataEndpoint))
{
/* Descriptor not found, error out */
return NoEndpointFound;
@@ -118,7 +133,7 @@ uint8_t ProcessConfigurationDescriptor(void) return SuccessfulConfigRead;
}
-uint8_t NextInterfaceBluetoothDataEndpoint(void* CurrentDescriptor)
+uint8_t DComp_NextInterfaceBluetoothDataEndpoint(void* CurrentDescriptor)
{
/* PURPOSE: Find next interface endpoint descriptor before next interface descriptor */
diff --git a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h index c72f010ae..a54727d48 100644 --- a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h +++ b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h @@ -28,6 +28,11 @@ this software.
*/
+/** \file
+ *
+ * Header file for ConfigDescriptor.c.
+ */
+
#ifndef _CONFIGDESCRIPTOR_H_
#define _CONFIGDESCRIPTOR_H_
@@ -35,24 +40,24 @@ #include <LUFA/Drivers/USB/USB.h>
#include "BluetoothHost.h"
-
- /* Macros: */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
/* Enums: */
+ /** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
enum BluetoothHost_GetConfigDescriptorDataCodes_t
{
- SuccessfulConfigRead = 0,
- ControlErrorDuringConfigRead = 1,
- InvalidConfigDataReturned = 2,
- DescriptorTooLarge = 3,
- NoInterfaceFound = 4,
- NoEndpointFound = 5,
+ SuccessfulConfigRead = 0, /**< Configuration Descriptor was processed successfully */
+ DevControlError = 1, /**< A control request to the device failed to complete successfully */
+ DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */
+ InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */
+ NoBTInterfaceFound = 4, /**< A compatible Blutooth interface was not found in the device's Configuration Descriptor */
+ NoEndpointFound = 5, /**< A compatible set of Bluetooth endpoints were not found in the
+ * device's Bluetooth interface
+ */
};
/* Function Prototypes: */
uint8_t ProcessConfigurationDescriptor(void);
- uint8_t NextInterfaceBluetoothDataEndpoint(void* CurrentDescriptor);
+ uint8_t DComp_NextInterfaceBluetoothDataEndpoint(void* CurrentDescriptor);
#endif
diff --git a/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.c b/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.c index 877684013..65d5b3311 100644 --- a/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.c +++ b/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.c @@ -28,15 +28,28 @@ this software.
*/
+/** \file
+ *
+ * USB Device Descriptor processing routines, to determine the overall device parameters. Descriptors are special
+ * computer-readable structures which the host requests upon device enumeration, to determine information about
+ * the attached device.
+ */
+
#include "DeviceDescriptor.h"
+/** Reads and processes an attached device's Device Descriptor, to determine compatibility
+ *
+ * This routine checks to ensure that the attached device's class codes match those for Bluetooth devices.
+ *
+ * \return An error code from the \ref BluetoothHost_GetDeviceDescriptorDataCodes_t enum.
+ */
uint8_t ProcessDeviceDescriptor(void)
{
USB_Descriptor_Device_t DeviceDescriptor;
/* Send the request to retrieve the device descriptor */
if (USB_Host_GetDeviceDescriptor(&DeviceDescriptor) != HOST_SENDCONTROL_Successful)
- return ControlErrorDuringDeviceRead;
+ return DevControlError;
/* Validate returned data - ensure the returned data is a device descriptor */
if (DeviceDescriptor.Header.Type != DTYPE_Device)
@@ -47,7 +60,7 @@ uint8_t ProcessDeviceDescriptor(void) (DeviceDescriptor.SubClass != BLUETOOTH_DEVICE_SUBCLASS) ||
(DeviceDescriptor.Protocol != BLUETOOTH_DEVICE_PROTOCOL))
{
- return IncorrectDevice;
+ return IncorrectBTDevice;
}
return SuccessfulDeviceRead;
diff --git a/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.h b/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.h index def9042b5..a87085a3a 100644 --- a/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.h +++ b/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.h @@ -28,6 +28,11 @@ this software.
*/
+/** \file
+ *
+ * Header file for DeviceDescriptor.c.
+ */
+
#ifndef _DEVICEDESCRIPTOR_H_
#define _DEVICEDESCRIPTOR_H_
@@ -37,17 +42,22 @@ #include "BluetoothHost.h"
/* Macros: */
+ /** Device Class value for the Bluetooth Device class */
#define BLUETOOTH_DEVICE_CLASS 0xE0
+
+ /** Device Subclass value for the Bluetooth Device class */
#define BLUETOOTH_DEVICE_SUBCLASS 0x01
+
+ /** Device Protocol value for the Bluetooth Device class */
#define BLUETOOTH_DEVICE_PROTOCOL 0x01
/* Enums: */
enum BluetoothHost_GetDeviceDescriptorDataCodes_t
{
- SuccessfulDeviceRead = 0,
- ControlErrorDuringDeviceRead = 1,
- InvalidDeviceDataReturned = 2,
- IncorrectDevice = 3,
+ SuccessfulDeviceRead = 0, /**< Device Descriptor was processed successfully */
+ ControlError = 1, /**< A control request to the device failed to complete successfully */
+ InvalidDeviceDataReturned = 2, /**< The device returned an invalid Device Descriptor */
+ IncorrectBTDevice = 3, /**< The attached device is not a Bluetooth class device */
};
/* Function Prototypes: */
diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c index 3292a53d7..e8daa0533 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c @@ -33,11 +33,10 @@ void Bluetooth_ProcessACLPackets(void)
{
- Bluetooth_ACL_Header_t ACLPacketHeader;
+ Bluetooth_ACL_Header_t ACLPacketHeader;
Bluetooth_DataPacket_Header_t DataHeader;
Pipe_SelectPipe(BLUETOOTH_DATA_IN_PIPE);
- Pipe_SetPipeToken(PIPE_TOKEN_IN);
Pipe_Unfreeze();
if (!(Pipe_IsReadWriteAllowed()))
@@ -49,11 +48,11 @@ void Bluetooth_ProcessACLPackets(void) Pipe_Read_Stream_LE(&ACLPacketHeader, sizeof(ACLPacketHeader));
Pipe_Read_Stream_LE(&DataHeader, sizeof(DataHeader));
- BT_DEBUG("(ACL) Packet Received", NULL);
- BT_DEBUG("(ACL) -- Connection Handle: 0x%04X", ACLPacketHeader.ConnectionHandle);
- BT_DEBUG("(ACL) -- Data Length: 0x%04X", ACLPacketHeader.DataLength);
- BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", DataHeader.DestinationChannel);
- BT_DEBUG("(ACL) -- Payload Length: 0x%04X", DataHeader.PayloadLength);
+ BT_ACL_DEBUG("Packet Received", NULL);
+ BT_ACL_DEBUG("-- Connection Handle: 0x%04X", (ACLPacketHeader.ConnectionHandle & 0x0FFF));
+ BT_ACL_DEBUG("-- Data Length: 0x%04X", ACLPacketHeader.DataLength);
+ BT_ACL_DEBUG("-- Destination Channel: 0x%04X", DataHeader.DestinationChannel);
+ BT_ACL_DEBUG("-- Payload Length: 0x%04X", DataHeader.PayloadLength);
if (DataHeader.DestinationChannel == BLUETOOTH_CHANNEL_SIGNALING)
{
@@ -69,14 +68,14 @@ void Bluetooth_ProcessACLPackets(void) Bluetooth_ProcessSignalPacket_ConfigurationRequest(&ACLPacketHeader, &DataHeader, &SignalCommandHeader);
break;
case BLUETOOTH_SIGNAL_INFORMATION_REQUEST:
- BT_DEBUG("(ACL) -- Information Request, Discarded", NULL);
+ BT_ACL_DEBUG(">> Information Request, Discarded", NULL);
Pipe_Discard_Stream(ACLPacketHeader.DataLength);
Pipe_ClearIN();
Pipe_Freeze();
break;
default:
- BT_DEBUG("(ACL) >> Unknown Signaling Command 0x%02X", SignalCommandHeader.Code);
+ BT_ACL_DEBUG(">> Unknown Signaling Command 0x%02X", SignalCommandHeader.Code);
Pipe_Discard_Stream(ACLPacketHeader.DataLength);
Pipe_ClearIN();
@@ -90,10 +89,10 @@ void Bluetooth_ProcessACLPackets(void) Pipe_Read_Stream_LE(&DataPayload, sizeof(DataPayload));
DataHeader.PayloadLength = 0;
- BT_DEBUG("(ACL) -- Data Payload: ", NULL);
+ BT_ACL_DEBUG("-- Data Payload: ", NULL);
for (uint16_t B = 0; B < sizeof(DataPayload); B++)
printf("0x%02X ", DataPayload[B]);
- BT_DEBUG("", NULL);
+ printf("\r\n");
Pipe_Discard_Stream(ACLPacketHeader.DataLength);
Pipe_ClearIN();
@@ -109,14 +108,13 @@ static inline void Bluetooth_ProcessSignalPacket_ConnectionRequest(Bluetooth_ACL Pipe_Read_Stream_LE(&ConnectionRequest, sizeof(ConnectionRequest));
- BT_DEBUG("(ACL) >> L2CAP Connection Request", NULL);
- BT_DEBUG("(ACL) -- PSM: 0x%04X", ConnectionRequest.PSM);
- BT_DEBUG("(ACL) -- Source Channel: 0x%04X", ConnectionRequest.SourceChannel);
+ BT_ACL_DEBUG(">> L2CAP Connection Request", NULL);
+ BT_ACL_DEBUG("-- PSM: 0x%04X", ConnectionRequest.PSM);
+ BT_ACL_DEBUG("-- Source Channel: 0x%04X", ConnectionRequest.SourceChannel);
Pipe_ClearIN();
Pipe_Freeze();
Pipe_SelectPipe(BLUETOOTH_DATA_OUT_PIPE);
- Pipe_SetPipeToken(PIPE_TOKEN_OUT);
Pipe_Unfreeze();
Bluetooth_SignalCommand_ConnectionResponse_t ConnectionResponse;
@@ -143,14 +141,14 @@ static inline void Bluetooth_ProcessSignalPacket_ConnectionRequest(Bluetooth_ACL Pipe_ClearOUT();
Pipe_Freeze();
- BT_DEBUG("(ACL) Packet Sent", NULL);
- BT_DEBUG("(ACL) -- Connection Handle: 0x%04X", ACLPacketHeader->ConnectionHandle);
- BT_DEBUG("(ACL) -- Data Length: 0x%04X", ACLPacketHeader->DataLength);
- BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", DataHeader->DestinationChannel);
- BT_DEBUG("(ACL) -- Payload Length: 0x%04X", DataHeader->PayloadLength);
- BT_DEBUG("(ACL) >> L2CAP Connection Response", NULL);
- BT_DEBUG("(ACL) -- Source Channel: 0x%04X", ConnectionResponse.SourceChannel);
- BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", ConnectionResponse.DestinationChannel);
+ BT_ACL_DEBUG("Packet Sent", NULL);
+ BT_ACL_DEBUG("-- Connection Handle: 0x%04X", (ACLPacketHeader->ConnectionHandle & 0x0FFF));
+ BT_ACL_DEBUG("-- Data Length: 0x%04X", ACLPacketHeader->DataLength);
+ BT_ACL_DEBUG("-- Destination Channel: 0x%04X", DataHeader->DestinationChannel);
+ BT_ACL_DEBUG("-- Payload Length: 0x%04X", DataHeader->PayloadLength);
+ BT_ACL_DEBUG(">> L2CAP Connection Response", NULL);
+ BT_ACL_DEBUG("-- Source Channel: 0x%04X", ConnectionResponse.SourceChannel);
+ BT_ACL_DEBUG("-- Destination Channel: 0x%04X", ConnectionResponse.DestinationChannel);
}
static inline void Bluetooth_ProcessSignalPacket_ConfigurationRequest(Bluetooth_ACL_Header_t* ACLPacketHeader,
@@ -161,13 +159,12 @@ static inline void Bluetooth_ProcessSignalPacket_ConfigurationRequest(Bluetooth_ Pipe_Read_Stream_LE(&ConfigurationRequest, sizeof(ConfigurationRequest));
- BT_DEBUG("(ACL) >> L2CAP Configuration Request", NULL);
- BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", ConfigurationRequest.DestinationChannel);
+ BT_ACL_DEBUG(">> L2CAP Configuration Request", NULL);
+ BT_ACL_DEBUG("-- Destination Channel: 0x%04X", ConfigurationRequest.DestinationChannel);
Pipe_ClearIN();
Pipe_Freeze();
Pipe_SelectPipe(BLUETOOTH_DATA_OUT_PIPE);
- Pipe_SetPipeToken(PIPE_TOKEN_OUT);
Pipe_Unfreeze();
Bluetooth_SignalCommand_ConfigurationResponse_t ConfigurationResponse;
@@ -183,7 +180,7 @@ static inline void Bluetooth_ProcessSignalPacket_ConfigurationRequest(Bluetooth_ if (ChannelData != NULL)
ChannelData->State = Channel_Open;
- // TODO: Add channel config data to the tail of ConfigurationResponse
+ // TODO: Add channel config data to the tail of ConfigurationResponse
ConfigurationResponse.SourceChannel = ChannelData->RemoteNumber;
ConfigurationResponse.Flags = 0x00;
@@ -197,10 +194,10 @@ static inline void Bluetooth_ProcessSignalPacket_ConfigurationRequest(Bluetooth_ Pipe_ClearOUT();
Pipe_Freeze();
- BT_DEBUG("(ACL) Packet Sent", NULL);
- BT_DEBUG("(ACL) -- Connection Handle: 0x%04X", ACLPacketHeader->ConnectionHandle);
- BT_DEBUG("(ACL) -- Data Length: 0x%04X", ACLPacketHeader->DataLength);
- BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", DataHeader->DestinationChannel);
- BT_DEBUG("(ACL) -- Payload Length: 0x%04X", DataHeader->PayloadLength);
- BT_DEBUG("(ACL) >> L2CAP Configuration Response", NULL);
+ BT_ACL_DEBUG("Packet Sent", NULL);
+ BT_ACL_DEBUG("-- Connection Handle: 0x%04X", (ACLPacketHeader->ConnectionHandle & 0x0FFF));
+ BT_ACL_DEBUG("-- Data Length: 0x%04X", ACLPacketHeader->DataLength);
+ BT_ACL_DEBUG("-- Destination Channel: 0x%04X", DataHeader->DestinationChannel);
+ BT_ACL_DEBUG("-- Payload Length: 0x%04X", DataHeader->PayloadLength);
+ BT_ACL_DEBUG(">> L2CAP Configuration Response", NULL);
}
diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h index 74924e0dc..c0fd1f620 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h @@ -41,6 +41,8 @@ #include "BluetoothStack.h"
/* Macros: */
+ #define BT_ACL_DEBUG(s, ...) printf_P(PSTR("(ACL) " s "\r\n"), __VA_ARGS__)
+
#define BLUETOOTH_CHANNEL_SIGNALING 0x0001
#define BLUETOOTH_CHANNEL_CONNECTIONLESS 0x0002
diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c index 8fb7367e9..dd2a3e5cf 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c @@ -30,15 +30,15 @@ #include "BluetoothHCICommands.h"
-static Bluetooth_HCICommand_Header_t HCICommandHeader;
-static Bluetooth_HCIEvent_Header_t HCIEventHeader;
+static Bluetooth_HCICommand_Header_t HCICommandHeader;
- uint8_t Bluetooth_HCIProcessingState;
- uint8_t Bluetooth_HCINextState;
-static uint8_t Bluetooth_TempDeviceAddress[6];
+ uint8_t Bluetooth_HCIProcessingState;
+static uint8_t Bluetooth_HCINextState;
+static uint8_t Bluetooth_TempDeviceAddress[6];
-static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint8_t ParamLength)
+static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint16_t ParameterLength)
{
+ /* Need to reserve the amount of bytes given in the header for the complete payload */
uint8_t CommandBuffer[sizeof(HCICommandHeader) + HCICommandHeader.ParameterLength];
USB_ControlRequest = (USB_Request_Header_t)
@@ -49,21 +49,23 @@ static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint8_t ParamLength) .wIndex = 0,
.wLength = sizeof(CommandBuffer)
};
-
- memset(CommandBuffer, 0x00, sizeof(CommandBuffer));
+
+ /* Copy over the HCI command header to the allocated buffer */
memcpy(CommandBuffer, &HCICommandHeader, sizeof(HCICommandHeader));
- if (ParamLength)
- memcpy(&CommandBuffer[sizeof(HCICommandHeader)], Parameters, ParamLength);
+ /* Zero out the parameter section of the response to ensure that any padding bytes do not expose private RAM contents */
+ memset(&CommandBuffer[sizeof(HCICommandHeader)], 0x00, HCICommandHeader.ParameterLength);
+ /* Copy over the command parameters (if any) to the command buffer - note, the number of actual source parameter bytes
+ may differ to those in the header; any difference in length is filled with 0x00 padding bytes */
+ memcpy(&CommandBuffer[sizeof(HCICommandHeader)], Parameters, ParameterLength);
+
Pipe_SelectPipe(PIPE_CONTROLPIPE);
return USB_Host_SendControlRequest(CommandBuffer);
}
void Bluetooth_ProcessHCICommands(void)
{
- uint8_t ErrorCode;
-
switch (Bluetooth_HCIProcessingState)
{
case Bluetooth_ProcessEvents:
@@ -72,68 +74,87 @@ void Bluetooth_ProcessHCICommands(void) if (Pipe_IsReadWriteAllowed())
{
+ Bluetooth_HCIEvent_Header_t HCIEventHeader;
+
+ /* Read in the event header to fetch the event code and payload length */
Pipe_Read_Stream_LE(&HCIEventHeader, sizeof(HCIEventHeader));
+ /* Create a temporary buffer for the event parameters */
uint8_t EventParams[HCIEventHeader.ParameterLength];
+ /* Read in the event parameters into the temporary buffer */
Pipe_Read_Stream_LE(&EventParams, HCIEventHeader.ParameterLength);
Pipe_ClearIN();
- BT_DEBUG("(HCI) Event Code: 0x%02X", HCIEventHeader.EventCode);
+ BT_HCI_DEBUG("Event Code: 0x%02X", HCIEventHeader.EventCode);
switch (HCIEventHeader.EventCode)
{
case EVENT_COMMAND_COMPLETE:
Bluetooth_HCIProcessingState = Bluetooth_HCINextState;
- BT_DEBUG("(HCI) >> Command Complete (Opcode 0x%04x)",
+ BT_HCI_DEBUG(">> Command Complete (Opcode 0x%04x)",
((Bluetooth_HCIEvent_CommandComplete_t*)&EventParams)->Opcode);
break;
case EVENT_COMMAND_STATUS:
+ /* If the execution of a command failed, reset the stack */
if (((Bluetooth_HCIEvent_CommandStatus_t*)&EventParams)->Status)
Bluetooth_HCIProcessingState = Bluetooth_Init;
- BT_DEBUG("(HCI) >> Command Status: 0x%02X",
+ BT_HCI_DEBUG(">> Command Status: 0x%02X",
((Bluetooth_HCIEvent_CommandStatus_t*)&EventParams)->Status);
break;
case EVENT_CONNECTION_REQUEST:
+ /* Need to store the remote device's BT address in a temporary buffer for later use */
memcpy(Bluetooth_TempDeviceAddress,
&((Bluetooth_HCIEvent_ConnectionRequest_t*)&EventParams)->RemoteAddress,
sizeof(Bluetooth_TempDeviceAddress));
+ /* Only accept the connection if it is a ACL (data) connection */
Bluetooth_HCIProcessingState = (Bluetooth_Connection.IsConnected ||
(((Bluetooth_HCIEvent_ConnectionRequest_t*)&EventParams)->LinkType != 0x01)) ?
Bluetooth_Conn_RejectConnection : Bluetooth_Conn_AcceptConnection;
- BT_DEBUG("(HCI) >> Connection Request from Device %02X:%02X:%02X:%02X:%02X:%02X",
+ BT_HCI_DEBUG(">> Connection Request from Device %02X:%02X:%02X:%02X:%02X:%02X",
Bluetooth_TempDeviceAddress[5], Bluetooth_TempDeviceAddress[4], Bluetooth_TempDeviceAddress[3],
Bluetooth_TempDeviceAddress[2], Bluetooth_TempDeviceAddress[1], Bluetooth_TempDeviceAddress[0]);
break;
case EVENT_PIN_CODE_REQUEST:
+ /* Need to store the remote device's BT address in a temporary buffer for later use */
memcpy(Bluetooth_TempDeviceAddress,
&((Bluetooth_HCIEvent_PinCodeRequest_t*)&EventParams)->RemoteAddress,
sizeof(Bluetooth_TempDeviceAddress));
Bluetooth_HCIProcessingState = Bluetooth_Conn_SendPINCode;
- BT_DEBUG("(HCI) >> PIN Request from Device %02X:%02X:%02X:%02X:%02X:%02X",
+ BT_HCI_DEBUG(">> PIN Request from Device %02X:%02X:%02X:%02X:%02X:%02X",
Bluetooth_TempDeviceAddress[5], Bluetooth_TempDeviceAddress[4], Bluetooth_TempDeviceAddress[3],
Bluetooth_TempDeviceAddress[2], Bluetooth_TempDeviceAddress[1], Bluetooth_TempDeviceAddress[0]);
break;
case EVENT_CONNECTION_COMPLETE:
+ /* Need to store the remote device's BT address in a temporary buffer for later use */
memcpy(Bluetooth_Connection.RemoteAddress,
&((Bluetooth_HCIEvent_ConnectionComplete_t*)&EventParams)->RemoteAddress,
sizeof(Bluetooth_TempDeviceAddress));
+ /* Store the created connection handle and indicate that the connection has been established */
Bluetooth_Connection.ConnectionHandle = ((Bluetooth_HCIEvent_ConnectionComplete_t*)&EventParams)->ConnectionHandle;
Bluetooth_Connection.IsConnected = true;
- BT_DEBUG("(HCI) >> Connection Complete to Device %02X:%02X:%02X:%02X:%02X:%02X, Handle 0x%04x",
+ BT_HCI_DEBUG(">> Connection Complete to Device %02X:%02X:%02X:%02X:%02X:%02X, Handle 0x%04x",
Bluetooth_Connection.RemoteAddress[5], Bluetooth_Connection.RemoteAddress[4],
Bluetooth_Connection.RemoteAddress[3], Bluetooth_Connection.RemoteAddress[2],
Bluetooth_Connection.RemoteAddress[1], Bluetooth_Connection.RemoteAddress[0],
Bluetooth_Connection.ConnectionHandle);
break;
+ case EVENT_DISCONNECTION_COMPLETE:
+ BT_HCI_DEBUG(">> Disconnection Complete", NULL);
+
+ /* Device disconnected, indicate connection information no longer valid */
+ Bluetooth_Connection.IsConnected = false;
+
+ Bluetooth_HCIProcessingState = Bluetooth_Init;
+ break;
}
}
@@ -141,6 +162,7 @@ void Bluetooth_ProcessHCICommands(void) break;
case Bluetooth_Init:
+ /* Reset the connection information structure to destroy any previous connection state */
memset(&Bluetooth_Connection, 0x00, sizeof(Bluetooth_Connection));
Bluetooth_HCIProcessingState = Bluetooth_Init_Reset;
@@ -152,24 +174,11 @@ void Bluetooth_ProcessHCICommands(void) ParameterLength: 0,
};
- BT_DEBUG("(HCI) Enter State: Bluetooth_Init_Reset", NULL);
+ BT_HCI_DEBUG("Enter State: Bluetooth_Init_Reset", NULL);
- ErrorCode = Bluetooth_SendHCICommand(NULL, 0);
+ /* Send the command to reset the bluetooth dongle controller */
+ Bluetooth_SendHCICommand(NULL, 0);
- Bluetooth_HCINextState = Bluetooth_Init_ReadBufferSize;
- Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
- break;
- case Bluetooth_Init_ReadBufferSize:
- HCICommandHeader = (Bluetooth_HCICommand_Header_t)
- {
- OpCode: {OGF: OGF_CTRLR_INFORMATIONAL, OCF: OGF_CTRLR_INFORMATIONAL_READBUFFERSIZE},
- ParameterLength: 0,
- };
-
- BT_DEBUG("(HCI) Enter State: Bluetooth_Init_ReadBufferSize", NULL);
-
- ErrorCode = Bluetooth_SendHCICommand(NULL, 0);
-
Bluetooth_HCINextState = Bluetooth_Init_SetLocalName;
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
@@ -180,10 +189,11 @@ void Bluetooth_ProcessHCICommands(void) ParameterLength: 248,
};
- BT_DEBUG("(HCI) Enter State: Bluetooth_Init_SetLocalName", NULL);
- BT_DEBUG("(HCI) -- Name: %s", Bluetooth_DeviceConfiguration.Name);
+ BT_HCI_DEBUG("Enter State: Bluetooth_Init_SetLocalName", NULL);
+ BT_HCI_DEBUG("-- Name: %s", Bluetooth_DeviceConfiguration.Name);
- ErrorCode = Bluetooth_SendHCICommand(Bluetooth_DeviceConfiguration.Name, strlen(Bluetooth_DeviceConfiguration.Name));
+ /* Send the command to set the bluetooth dongle's name for other devices to see */
+ Bluetooth_SendHCICommand(Bluetooth_DeviceConfiguration.Name, strlen(Bluetooth_DeviceConfiguration.Name));
Bluetooth_HCINextState = Bluetooth_Init_SetDeviceClass;
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
@@ -195,9 +205,10 @@ void Bluetooth_ProcessHCICommands(void) ParameterLength: 3,
};
- BT_DEBUG("(HCI) Enter State: Bluetooth_Init_SetDeviceClass", NULL);
+ BT_HCI_DEBUG("Enter State: Bluetooth_Init_SetDeviceClass", NULL);
- ErrorCode = Bluetooth_SendHCICommand(&Bluetooth_DeviceConfiguration.Class, 3);
+ /* Send the command to set the class of the device for other devices to see */
+ Bluetooth_SendHCICommand(&Bluetooth_DeviceConfiguration.Class, 3);
Bluetooth_HCINextState = Bluetooth_Init_WriteScanEnable;
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
@@ -209,10 +220,12 @@ void Bluetooth_ProcessHCICommands(void) ParameterLength: 1,
};
- BT_DEBUG("(HCI) Enter State: Bluetooth_Init_WriteScanEnable", NULL);
+ BT_HCI_DEBUG("Enter State: Bluetooth_Init_WriteScanEnable", NULL);
- uint8_t Interval = InquiryAndPageScans;
- ErrorCode = Bluetooth_SendHCICommand(&Interval, 1);
+ uint8_t Interval = BT_SCANMODE_InquiryAndPageScans;
+
+ /* Send the command to set the remote device scanning mode */
+ Bluetooth_SendHCICommand(&Interval, 1);
Bluetooth_HCINextState = Bluetooth_ProcessEvents;
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
@@ -224,14 +237,17 @@ void Bluetooth_ProcessHCICommands(void) ParameterLength: sizeof(Bluetooth_HCICommand_AcceptConnectionRequest_t),
};
- BT_DEBUG("(HCI) Enter State: Bluetooth_Conn_AcceptConnection", NULL);
+ BT_HCI_DEBUG("Enter State: Bluetooth_Conn_AcceptConnection", NULL);
+ /* Copy over the temporary BT device address saved from the Connection Request event, indicate slave
+ connection role */
Bluetooth_HCICommand_AcceptConnectionRequest_t AcceptConnectionParams;
-
- memcpy(AcceptConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(Bluetooth_TempDeviceAddress));
+ memcpy(AcceptConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress,
+ sizeof(AcceptConnectionParams.RemoteAddress));
AcceptConnectionParams.SlaveRole = true;
- ErrorCode = Bluetooth_SendHCICommand(&AcceptConnectionParams, sizeof(AcceptConnectionParams));
+ /* Send the command to accept the remote connection request */
+ Bluetooth_SendHCICommand(&AcceptConnectionParams, sizeof(Bluetooth_HCICommand_AcceptConnectionRequest_t));
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
@@ -242,14 +258,16 @@ void Bluetooth_ProcessHCICommands(void) ParameterLength: sizeof(Bluetooth_HCICommand_RejectConnectionRequest_t),
};
- BT_DEBUG("(HCI) Enter State: Bluetooth_Conn_RejectConnection", NULL);
+ BT_HCI_DEBUG("Enter State: Bluetooth_Conn_RejectConnection", NULL);
+ /* Copy over the temporary BT device address saved from the Connection Request event, indicate failure
+ to accept the connection due to limited device resources */
Bluetooth_HCICommand_RejectConnectionRequest_t RejectConnectionParams;
-
memcpy(RejectConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(RejectConnectionParams.RemoteAddress));
RejectConnectionParams.Reason = ERROR_LIMITED_RESOURCES;
- ErrorCode = Bluetooth_SendHCICommand(&RejectConnectionParams, sizeof(RejectConnectionParams));
+ /* Send the command to reject the remote connection request */
+ Bluetooth_SendHCICommand(&RejectConnectionParams, sizeof(Bluetooth_HCICommand_RejectConnectionRequest_t));
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
@@ -260,16 +278,18 @@ void Bluetooth_ProcessHCICommands(void) ParameterLength: sizeof(Bluetooth_HCICommand_PinCodeResponse_t),
};
- BT_DEBUG("(HCI) Enter State: Bluetooth_Conn_SendPINCode", NULL);
- BT_DEBUG("(HCI) -- PIN: %s", Bluetooth_DeviceConfiguration.PINCode);
+ BT_HCI_DEBUG("Enter State: Bluetooth_Conn_SendPINCode", NULL);
+ BT_HCI_DEBUG("-- PIN: %s", Bluetooth_DeviceConfiguration.PINCode);
+ /* Copy over the temporary BT device address saved from the PIN Code Request event, copy over the
+ local PIN authentication code to the response */
Bluetooth_HCICommand_PinCodeResponse_t PINCodeRequestParams;
-
- memcpy(PINCodeRequestParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(Bluetooth_TempDeviceAddress));
+ memcpy(PINCodeRequestParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(PINCodeRequestParams.RemoteAddress));
PINCodeRequestParams.PINCodeLength = strlen(Bluetooth_DeviceConfiguration.PINCode);
memcpy(PINCodeRequestParams.PINCode, Bluetooth_DeviceConfiguration.PINCode, sizeof(PINCodeRequestParams.PINCode));
- ErrorCode = Bluetooth_SendHCICommand(&PINCodeRequestParams, sizeof(PINCodeRequestParams));
+ /* Send the command to transmit the device's local PIN number for authentication */
+ Bluetooth_SendHCICommand(&PINCodeRequestParams, sizeof(Bluetooth_HCICommand_PinCodeResponse_t));
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h index 03a6505cb..4df5861cf 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h @@ -42,6 +42,8 @@ #include "BluetoothClassCodes.h"
/* Macros: */
+ #define BT_HCI_DEBUG(s, ...) printf_P(PSTR("(HCI) " s "\r\n"), __VA_ARGS__)
+
#define OGF_LINK_CONTROL 0x01
#define OGF_CTRLR_BASEBAND 0x03
#define OGF_CTRLR_INFORMATIONAL 0x04
@@ -164,24 +166,23 @@ /* Enums: */
enum Bluetooth_ScanEnable_Modes_t
{
- NoScansEnabled = 0,
- InquiryScanOnly = 1,
- PageScanOnly = 2,
- InquiryAndPageScans = 3,
+ BT_SCANMODE_NoScansEnabled = 0,
+ BT_SCANMODE_InquiryScanOnly = 1,
+ BT_SCANMODE_PageScanOnly = 2,
+ BT_SCANMODE_InquiryAndPageScans = 3,
};
enum BluetoothStack_States_t
{
- Bluetooth_ProcessEvents = 0,
- Bluetooth_Init = 1,
- Bluetooth_Init_Reset = 2,
- Bluetooth_Init_ReadBufferSize = 3,
- Bluetooth_Init_SetLocalName = 4,
- Bluetooth_Init_SetDeviceClass = 5,
- Bluetooth_Init_WriteScanEnable = 6,
- Bluetooth_Conn_AcceptConnection = 7,
- Bluetooth_Conn_RejectConnection = 8,
- Bluetooth_Conn_SendPINCode = 9,
+ Bluetooth_ProcessEvents = 0,
+ Bluetooth_Init = 1,
+ Bluetooth_Init_Reset = 2,
+ Bluetooth_Init_SetLocalName = 3,
+ Bluetooth_Init_SetDeviceClass = 4,
+ Bluetooth_Init_WriteScanEnable = 5,
+ Bluetooth_Conn_AcceptConnection = 6,
+ Bluetooth_Conn_RejectConnection = 7,
+ Bluetooth_Conn_SendPINCode = 8,
};
/* External Variables: */
@@ -192,7 +193,7 @@ void Bluetooth_ProcessHCIEvents(void);
#if defined(INCLUDE_FROM_BLUETOOTHHCICOMMANDS_C)
- static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint8_t ParamLength);
+ static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint16_t ParameterLength);
#endif
#endif
diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h index 0fc2dd2c2..20bc95696 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h @@ -39,14 +39,16 @@ #include "BluetoothACLPackets.h"
/* Macros: */
+ #define BLUETOOTH_DATA_IN_PIPE 1
+ #define BLUETOOTH_DATA_OUT_PIPE 2
+ #define BLUETOOTH_EVENTS_PIPE 3
+
#define BLUETOOTH_MAX_OPEN_CHANNELS 2
#define BLUETOOTH_CHANNELNUMBER_BASEOFFSET 0x0040
#define CHANNEL_LOOKUP_BY_SOURCE true
#define CHANNEL_LOOKUP_BY_DESTINATION false
- #define BT_DEBUG(s, ...) printf_P(PSTR(s "\r\n"), __VA_ARGS__)
-
/* Enums: */
enum Bluetooth_Channel_State_t
{
diff --git a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h index 5a442ffa9..3f6591635 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h @@ -44,9 +44,6 @@ /* Macros: */
/** Interface Class value for the Human Interface Device class */
#define HID_CLASS 0x03
-
- /** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
/* Enums: */
/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h index 530c7ded1..bb31cc131 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h @@ -48,9 +48,6 @@ /** Interface Protocol value for a Boot Protocol Mouse compliant device */
#define JOYSTICK_PROTOCOL 0x02
- /** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
-
/** Descriptor header type constant for a HID descriptor */
#define DTYPE_HID 0x21
diff --git a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h index 2a86dbfc3..24ceeb541 100644 --- a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h @@ -47,9 +47,6 @@ /** Interface Protocol value for a Boot Protocol Keyboard compliant device */
#define KEYBOARD_PROTOCOL 0x01
-
- /** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
/* Enums: */
/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h index e8914b61d..70d1c1055 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h @@ -47,9 +47,6 @@ /** Interface Protocol value for a Boot Protocol Keyboard compliant device */
#define KEYBOARD_PROTOCOL 0x01
-
- /** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
/** Descriptor header type constant for a HID descriptor */
#define DTYPE_HID 0x21
diff --git a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h index 1e0ea2cd9..548d52694 100644 --- a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h @@ -50,9 +50,6 @@ /** Interface Class value for the MIDI Audio Streaming protocol */
#define MIDI_STREAMING_PROTOCOL 0x00
-
- /** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
/* Enums: */
/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h index ec5fe6add..fb1a2111b 100644 --- a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h @@ -50,9 +50,6 @@ /** Interface Protocol value for the Bulk Only transport protocol */
#define MASS_STORE_PROTOCOL 0x50
-
- /** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
/* Enums: */
/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h index 31e07cfe5..e092a4534 100644 --- a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h @@ -47,9 +47,6 @@ /** Interface Protocol value for a Boot Protocol Mouse compliant device */
#define MOUSE_PROTOCOL 0x02
-
- /** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
/* Enums: */
/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h index a7a734134..69753aba7 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h @@ -47,10 +47,7 @@ /** Interface Protocol value for a Boot Protocol Mouse compliant device */
#define MOUSE_PROTOCOL 0x02
-
- /** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
-
+
/** Descriptor header type constant for a HID descriptor */
#define DTYPE_HID 0x21
diff --git a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h index dc2f3e9e9..471cbb5f3 100644 --- a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h @@ -46,9 +46,6 @@ /** Interface Protocol value for a Bidirectional communication encapsulation */
#define PRINTER_PROTOCOL 0x02
-
- /** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
/* Enums: */
/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h index 47822319d..520c048b7 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h @@ -59,9 +59,6 @@ /** Interface Class value for the CDC data protocol */
#define CDC_DATA_PROTOCOL 0x00
-
- /** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
/* Enums: */
/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h index 0c0237879..ca3d32941 100644 --- a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h @@ -50,9 +50,6 @@ /** Interface Class value for the Still Image Device protocol */
#define SIMAGE_PROTOCOL 0x01
-
- /** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
/* Enums: */
/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h index 1b3b13858..b65ac0d2d 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h @@ -59,9 +59,6 @@ /** Interface Class value for the CDC data protocol */
#define CDC_DATA_PROTOCOL 0x00
-
- /** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
/* Enums: */
/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
|