1 files changed, 69 insertions, 0 deletions
diff --git a/Demos/OTG/TestApp/TestApp.txt b/Demos/OTG/TestApp/TestApp.txt
new file mode 100644
index 000000000..aef55b761
--- /dev/null
+++ b/Demos/OTG/TestApp/TestApp.txt
@@ -0,0 +1,69 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+ 
+/** \mainpage Test Application for the LUFA library
+ *
+ *  \section SSec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Host/Device (Dual Role)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>N/A</td>
+ *   </tr>
+ *   <tr> 
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>N/A</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>N/A</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Usable Speeds:</b></td>
+ *    <td>Low Speed Mode, Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_Description Project Description: 
+ *
+ *  Test application. Demonstrates several aspects of the LUFA
+ *  Library. On startup the current temperature will be printed
+ *  through the USART every 10 seconds, and the current joystick
+ *  position will be indicated via the LEDs on the selected board.
+ *  Pressing the HWB will initiate the USB subsystem, enumerating
+ *  the device (which has <b>no actual functionality beyond
+ *  enumeration as a device or as a host in this demo</b>, and serves
+ *  only to demonstrate the USB portion of the library). It will
+ *  also suspend the joystick and temperature monitoring tasks.
+ * 
+ *  Pressing the HWB a second time will turn off the USB system
+ *  and resume the temperature printing task (but not the joystick
+ *  monitoring task).
+ *
+ *  When activated, the USB events will be printed through the
+ *  serial USART.
+ *
+ *  When the USB subsystem is activated, the board LEDs will show
+ *  the current USB status.
+ *
+ *  \section SSec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+\ No newline at end of file