diff options
Diffstat (limited to 'Demos/Host')
24 files changed, 72 insertions, 72 deletions
diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile index 44b348447..fb7ceecae 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -519,7 +519,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/ClassDriver/KeyboardHost/makefile b/Demos/Host/ClassDriver/KeyboardHost/makefile index d3765b6f1..fb6c11072 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/makefile +++ b/Demos/Host/ClassDriver/KeyboardHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -519,7 +519,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile index 4c26502ee..172137bf6 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -519,7 +519,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/ClassDriver/MIDIHost/makefile b/Demos/Host/ClassDriver/MIDIHost/makefile index dfeabfbd8..dc5811fb1 100644 --- a/Demos/Host/ClassDriver/MIDIHost/makefile +++ b/Demos/Host/ClassDriver/MIDIHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -519,7 +519,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/ClassDriver/MassStorageHost/makefile b/Demos/Host/ClassDriver/MassStorageHost/makefile index 4b33cb3dd..f63a44882 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/makefile +++ b/Demos/Host/ClassDriver/MassStorageHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -520,7 +520,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/ClassDriver/MouseHost/makefile b/Demos/Host/ClassDriver/MouseHost/makefile index 16e79eade..5bd6b12e8 100644 --- a/Demos/Host/ClassDriver/MouseHost/makefile +++ b/Demos/Host/ClassDriver/MouseHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -519,7 +519,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/makefile b/Demos/Host/ClassDriver/MouseHostWithParser/makefile index c40979676..6ef2846fd 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/makefile +++ b/Demos/Host/ClassDriver/MouseHostWithParser/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -519,7 +519,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/ClassDriver/PrinterHost/makefile b/Demos/Host/ClassDriver/PrinterHost/makefile index a4fa937b5..d0da5af9e 100644 --- a/Demos/Host/ClassDriver/PrinterHost/makefile +++ b/Demos/Host/ClassDriver/PrinterHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -519,7 +519,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile index 2b33d174a..f01f2f9fa 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -519,7 +519,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/ClassDriver/StillImageHost/makefile b/Demos/Host/ClassDriver/StillImageHost/makefile index 4069d9196..203e2cd73 100644 --- a/Demos/Host/ClassDriver/StillImageHost/makefile +++ b/Demos/Host/ClassDriver/StillImageHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -519,7 +519,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/makefile b/Demos/Host/ClassDriver/VirtualSerialHost/makefile index 27f813b3f..47e9da17c 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/makefile +++ b/Demos/Host/ClassDriver/VirtualSerialHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -519,7 +519,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/Incomplete/BluetoothHost/makefile b/Demos/Host/Incomplete/BluetoothHost/makefile index c65cd0f5f..9dc804ac2 100644 --- a/Demos/Host/Incomplete/BluetoothHost/makefile +++ b/Demos/Host/Incomplete/BluetoothHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -529,7 +529,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -540,7 +540,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/LowLevel/GenericHIDHost/makefile b/Demos/Host/LowLevel/GenericHIDHost/makefile index 1541d5a3e..d82d5181c 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/makefile +++ b/Demos/Host/LowLevel/GenericHIDHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -520,7 +520,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/makefile b/Demos/Host/LowLevel/JoystickHostWithParser/makefile index 3f0010355..c44e69c49 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/makefile +++ b/Demos/Host/LowLevel/JoystickHostWithParser/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/LowLevel/KeyboardHost/makefile b/Demos/Host/LowLevel/KeyboardHost/makefile index 866d2120d..b9d9f240a 100644 --- a/Demos/Host/LowLevel/KeyboardHost/makefile +++ b/Demos/Host/LowLevel/KeyboardHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -520,7 +520,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile index 83abe7172..64516d44c 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/LowLevel/MIDIHost/makefile b/Demos/Host/LowLevel/MIDIHost/makefile index eb040d06e..3d7369876 100644 --- a/Demos/Host/LowLevel/MIDIHost/makefile +++ b/Demos/Host/LowLevel/MIDIHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -520,7 +520,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/LowLevel/MassStorageHost/makefile b/Demos/Host/LowLevel/MassStorageHost/makefile index f96868d8c..220d71d62 100644 --- a/Demos/Host/LowLevel/MassStorageHost/makefile +++ b/Demos/Host/LowLevel/MassStorageHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -522,7 +522,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -533,7 +533,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/LowLevel/MouseHost/makefile b/Demos/Host/LowLevel/MouseHost/makefile index b71f82e8d..e7df96428 100644 --- a/Demos/Host/LowLevel/MouseHost/makefile +++ b/Demos/Host/LowLevel/MouseHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -520,7 +520,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/LowLevel/MouseHostWithParser/makefile b/Demos/Host/LowLevel/MouseHostWithParser/makefile index ffe5f128f..5fd2f9cf2 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/makefile +++ b/Demos/Host/LowLevel/MouseHostWithParser/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/LowLevel/PrinterHost/makefile b/Demos/Host/LowLevel/PrinterHost/makefile index 65c7ff8fb..93bb4ad5d 100644 --- a/Demos/Host/LowLevel/PrinterHost/makefile +++ b/Demos/Host/LowLevel/PrinterHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/makefile b/Demos/Host/LowLevel/RNDISEthernetHost/makefile index 3e899b370..87b65f0da 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/makefile +++ b/Demos/Host/LowLevel/RNDISEthernetHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/LowLevel/StillImageHost/makefile b/Demos/Host/LowLevel/StillImageHost/makefile index bd6ee2708..72d7707a4 100644 --- a/Demos/Host/LowLevel/StillImageHost/makefile +++ b/Demos/Host/LowLevel/StillImageHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Host/LowLevel/VirtualSerialHost/makefile b/Demos/Host/LowLevel/VirtualSerialHost/makefile index 584612d65..935391ae6 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/makefile +++ b/Demos/Host/LowLevel/VirtualSerialHost/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -520,7 +520,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset |