diff options
Diffstat (limited to 'Demos/Device')
86 files changed, 579 insertions, 747 deletions
diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt index 654536c80..dfa9362c2 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF Audio 1.0 Data Formats Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf index dd5fe211c..d217aa443 100644 --- a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Audio Input Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile index a63765eb0..5724da5e6 100644 --- a/Demos/Device/ClassDriver/AudioInput/makefile +++ b/Demos/Device/ClassDriver/AudioInput/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt index 77e986617..76445e0e2 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF Audio 1.0 Data Formats Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf index c50327d39..4cd9e9c5b 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Audio Output Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile index 1ce907ca2..88074f605 100644 --- a/Demos/Device/ClassDriver/AudioOutput/makefile +++ b/Demos/Device/ClassDriver/AudioOutput/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf index cd37f7df4..0f78680c3 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Dual Virtual Serial Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt index 822fabca9..70e95ad51 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt +++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -41,7 +41,7 @@ * USBIF CDC Class Standard</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile index 5290c4fb1..064bf1289 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile +++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf index e12fde772..7b71c2054 100644 --- a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf +++ b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Generic HID Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt index 998471a2c..3d72345f3 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile index e4d802150..5ef95e060 100644 --- a/Demos/Device/ClassDriver/GenericHID/makefile +++ b/Demos/Device/ClassDriver/GenericHID/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/Joystick/Doxygen.conf b/Demos/Device/ClassDriver/Joystick/Doxygen.conf index 1ebeaf260..407d08a86 100644 --- a/Demos/Device/ClassDriver/Joystick/Doxygen.conf +++ b/Demos/Device/ClassDriver/Joystick/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Joystick Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.txt b/Demos/Device/ClassDriver/Joystick/Joystick.txt index 6fee43b3e..55be2c300 100644 --- a/Demos/Device/ClassDriver/Joystick/Joystick.txt +++ b/Demos/Device/ClassDriver/Joystick/Joystick.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile index 955b5bd4f..c970747a0 100644 --- a/Demos/Device/ClassDriver/Joystick/makefile +++ b/Demos/Device/ClassDriver/Joystick/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf index 3557860c3..0b47b1a32 100644 --- a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Keyboard Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt index b124efb0f..3e7ff88ed 100644 --- a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt +++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile index 03913b7be..8b07bb520 100644 --- a/Demos/Device/ClassDriver/Keyboard/makefile +++ b/Demos/Device/ClassDriver/Keyboard/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf index 284d454a5..a7357cb18 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Keyboard/Mouse Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt index a926ab15b..b994422a8 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt +++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile index ee4e43830..7d4fc9537 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/makefile +++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf index 24028aea7..c3696bbd9 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Keyboard/Mouse (Multiple HID R # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt index bf0528ecc..e99a7dc74 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile index 93ce28617..2909880e4 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/MIDI/Doxygen.conf b/Demos/Device/ClassDriver/MIDI/Doxygen.conf index 96f71c7d1..f95325f80 100644 --- a/Demos/Device/ClassDriver/MIDI/Doxygen.conf +++ b/Demos/Device/ClassDriver/MIDI/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - MIDI Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.txt b/Demos/Device/ClassDriver/MIDI/MIDI.txt index 026f91bbf..362250c41 100644 --- a/Demos/Device/ClassDriver/MIDI/MIDI.txt +++ b/Demos/Device/ClassDriver/MIDI/MIDI.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -39,7 +39,7 @@ * General MIDI Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile index 9190344f7..e5b0e624a 100644 --- a/Demos/Device/ClassDriver/MIDI/makefile +++ b/Demos/Device/ClassDriver/MIDI/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf index e74be64ac..4ef067503 100644 --- a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Mass Storage Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt index c2761a38d..5bf7c5570 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -40,7 +40,7 @@ * SCSI Block Commands Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile index be74104a0..0ee461967 100644 --- a/Demos/Device/ClassDriver/MassStorage/makefile +++ b/Demos/Device/ClassDriver/MassStorage/makefile @@ -698,7 +698,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf index f8b707dff..4f8b9e59d 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Mass Storage and Keyboard Devi # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt index 01bf5772c..7cdb47279 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -44,7 +44,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile index 5e8dbf49d..a504d0c63 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile @@ -693,7 +693,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/Mouse/Doxygen.conf b/Demos/Device/ClassDriver/Mouse/Doxygen.conf index 7fccc0948..1dd2ccd02 100644 --- a/Demos/Device/ClassDriver/Mouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/Mouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Mouse Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.txt b/Demos/Device/ClassDriver/Mouse/Mouse.txt index 65a184f2a..d1277a2d6 100644 --- a/Demos/Device/ClassDriver/Mouse/Mouse.txt +++ b/Demos/Device/ClassDriver/Mouse/Mouse.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile index f54c896c2..7c7493d1a 100644 --- a/Demos/Device/ClassDriver/Mouse/makefile +++ b/Demos/Device/ClassDriver/Mouse/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf index d43e5b0ac..da74f6b48 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf +++ b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - RNDIS Ethernet Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt index a458370da..ac72d4ae7 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt @@ -10,8 +10,8 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) * * \section Sec_Info USB Information: * @@ -35,7 +35,7 @@ * <td>Microsoft RNDIS Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile index 4cc22a597..c53705609 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/makefile +++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile @@ -701,7 +701,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf index 2e09c1a8a..ebe72a5d9 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Virtual Serial Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt index f26c4b872..e0a3291b4 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt +++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -37,7 +37,7 @@ * <td>USBIF CDC Class Standard</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile index 5539d8ab2..e00235113 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/makefile +++ b/Demos/Device/ClassDriver/VirtualSerial/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf index 20d4914b4..c38f51df6 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Virtual Serial/Mass Storage Device Demo # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt index 088f20ac4..042244119 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -42,7 +42,7 @@ * SCSI Block Commands Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile b/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile index a3bca4673..57b78a87e 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile @@ -693,7 +693,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf index acf6f4733..fea97b2d9 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Virtual Serial and Mouse Devic # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt index 53152043f..fe6328b73 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -41,7 +41,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile index 5cd99d5ff..592c91513 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile index 5afc17208..052f3edea 100644 --- a/Demos/Device/Incomplete/Sideshow/makefile +++ b/Demos/Device/Incomplete/Sideshow/makefile @@ -695,7 +695,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/Incomplete/TestAndMeasurement/makefile b/Demos/Device/Incomplete/TestAndMeasurement/makefile index a2ba7c107..da395ce2d 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/makefile +++ b/Demos/Device/Incomplete/TestAndMeasurement/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.txt b/Demos/Device/LowLevel/AudioInput/AudioInput.txt index 17b476e24..b30d7d63e 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.txt +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF Audio 1.0 Data Formats Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/AudioInput/Doxygen.conf b/Demos/Device/LowLevel/AudioInput/Doxygen.conf index dd5fe211c..d217aa443 100644 --- a/Demos/Device/LowLevel/AudioInput/Doxygen.conf +++ b/Demos/Device/LowLevel/AudioInput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Audio Input Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile index c2288f7fc..e9fee0961 100644 --- a/Demos/Device/LowLevel/AudioInput/makefile +++ b/Demos/Device/LowLevel/AudioInput/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt b/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt index 77e986617..76445e0e2 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF Audio 1.0 Data Formats Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/AudioOutput/Doxygen.conf b/Demos/Device/LowLevel/AudioOutput/Doxygen.conf index c50327d39..4cd9e9c5b 100644 --- a/Demos/Device/LowLevel/AudioOutput/Doxygen.conf +++ b/Demos/Device/LowLevel/AudioOutput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Audio Output Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile index 4c32b3e2a..486e8c364 100644 --- a/Demos/Device/LowLevel/AudioOutput/makefile +++ b/Demos/Device/LowLevel/AudioOutput/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf b/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf index cd37f7df4..0f78680c3 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf +++ b/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Dual Virtual Serial Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt index bd0867f62..0897bf90b 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt +++ b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -41,7 +41,7 @@ * USBIF CDC Class Standard</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile index 4e683e9e5..622b99862 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/makefile +++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/GenericHID/Doxygen.conf b/Demos/Device/LowLevel/GenericHID/Doxygen.conf index e12fde772..7b71c2054 100644 --- a/Demos/Device/LowLevel/GenericHID/Doxygen.conf +++ b/Demos/Device/LowLevel/GenericHID/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Generic HID Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.txt b/Demos/Device/LowLevel/GenericHID/GenericHID.txt index 998471a2c..3d72345f3 100644 --- a/Demos/Device/LowLevel/GenericHID/GenericHID.txt +++ b/Demos/Device/LowLevel/GenericHID/GenericHID.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile index 95ed8b01b..81b147cc6 100644 --- a/Demos/Device/LowLevel/GenericHID/makefile +++ b/Demos/Device/LowLevel/GenericHID/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/Joystick/Doxygen.conf b/Demos/Device/LowLevel/Joystick/Doxygen.conf index 1ebeaf260..407d08a86 100644 --- a/Demos/Device/LowLevel/Joystick/Doxygen.conf +++ b/Demos/Device/LowLevel/Joystick/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Joystick Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/Joystick/Joystick.txt b/Demos/Device/LowLevel/Joystick/Joystick.txt index 6fee43b3e..55be2c300 100644 --- a/Demos/Device/LowLevel/Joystick/Joystick.txt +++ b/Demos/Device/LowLevel/Joystick/Joystick.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile index 639304095..59459bb70 100644 --- a/Demos/Device/LowLevel/Joystick/makefile +++ b/Demos/Device/LowLevel/Joystick/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/Keyboard/Doxygen.conf b/Demos/Device/LowLevel/Keyboard/Doxygen.conf index 3557860c3..0b47b1a32 100644 --- a/Demos/Device/LowLevel/Keyboard/Doxygen.conf +++ b/Demos/Device/LowLevel/Keyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Keyboard Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.txt b/Demos/Device/LowLevel/Keyboard/Keyboard.txt index 36e60290c..f7e282961 100644 --- a/Demos/Device/LowLevel/Keyboard/Keyboard.txt +++ b/Demos/Device/LowLevel/Keyboard/Keyboard.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile index 9c36e4eaa..ee4bd35bd 100644 --- a/Demos/Device/LowLevel/Keyboard/makefile +++ b/Demos/Device/LowLevel/Keyboard/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf b/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf index 284d454a5..a7357cb18 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf +++ b/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Keyboard/Mouse Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt index a926ab15b..b994422a8 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt +++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile index c56d990ff..d99e6dd3f 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/makefile +++ b/Demos/Device/LowLevel/KeyboardMouse/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/MIDI/Doxygen.conf b/Demos/Device/LowLevel/MIDI/Doxygen.conf index 96f71c7d1..f95325f80 100644 --- a/Demos/Device/LowLevel/MIDI/Doxygen.conf +++ b/Demos/Device/LowLevel/MIDI/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - MIDI Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/MIDI/MIDI.txt b/Demos/Device/LowLevel/MIDI/MIDI.txt index 026f91bbf..362250c41 100644 --- a/Demos/Device/LowLevel/MIDI/MIDI.txt +++ b/Demos/Device/LowLevel/MIDI/MIDI.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -39,7 +39,7 @@ * General MIDI Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile index 38247459f..4c3aca974 100644 --- a/Demos/Device/LowLevel/MIDI/makefile +++ b/Demos/Device/LowLevel/MIDI/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/MassStorage/Doxygen.conf b/Demos/Device/LowLevel/MassStorage/Doxygen.conf index e74be64ac..4ef067503 100644 --- a/Demos/Device/LowLevel/MassStorage/Doxygen.conf +++ b/Demos/Device/LowLevel/MassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Mass Storage Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.txt b/Demos/Device/LowLevel/MassStorage/MassStorage.txt index 35b47a46a..b5f9f9cef 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.txt +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -40,7 +40,7 @@ * SCSI Block Commands Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile index e07f1e882..e78e2640b 100644 --- a/Demos/Device/LowLevel/MassStorage/makefile +++ b/Demos/Device/LowLevel/MassStorage/makefile @@ -692,7 +692,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/Mouse/Doxygen.conf b/Demos/Device/LowLevel/Mouse/Doxygen.conf index 7fccc0948..1dd2ccd02 100644 --- a/Demos/Device/LowLevel/Mouse/Doxygen.conf +++ b/Demos/Device/LowLevel/Mouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Mouse Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/Mouse/Mouse.txt b/Demos/Device/LowLevel/Mouse/Mouse.txt index a9cdf2fe5..0664cba63 100644 --- a/Demos/Device/LowLevel/Mouse/Mouse.txt +++ b/Demos/Device/LowLevel/Mouse/Mouse.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile index dc4438f91..a793b41bc 100644 --- a/Demos/Device/LowLevel/Mouse/makefile +++ b/Demos/Device/LowLevel/Mouse/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf b/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf index d43e5b0ac..da74f6b48 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf +++ b/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - RNDIS Ethernet Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt index a458370da..ac72d4ae7 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt @@ -10,8 +10,8 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) * * \section Sec_Info USB Information: * @@ -35,7 +35,7 @@ * <td>Microsoft RNDIS Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile index 53afd78e6..889e42d75 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/makefile +++ b/Demos/Device/LowLevel/RNDISEthernet/makefile @@ -701,7 +701,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf b/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf index 2e09c1a8a..ebe72a5d9 100644 --- a/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf +++ b/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Virtual Serial Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt index f26c4b872..e0a3291b4 100644 --- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt +++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -37,7 +37,7 @@ * <td>USBIF CDC Class Standard</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile index 1256bbdab..4cfea66dd 100644 --- a/Demos/Device/LowLevel/VirtualSerial/makefile +++ b/Demos/Device/LowLevel/VirtualSerial/makefile @@ -690,7 +690,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. |