diff options
Diffstat (limited to 'Demos/Device/MassStorage/SCSI_Codes.h')
| -rw-r--r-- | Demos/Device/MassStorage/SCSI_Codes.h | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/Demos/Device/MassStorage/SCSI_Codes.h b/Demos/Device/MassStorage/SCSI_Codes.h new file mode 100644 index 000000000..2b2213de2 --- /dev/null +++ b/Demos/Device/MassStorage/SCSI_Codes.h @@ -0,0 +1,85 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2009.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, and distribute this software
+ and its documentation for any purpose and without fee is hereby
+ granted, provided that the above copyright notice appear in all
+ copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Header containing macros for possible SCSI commands and SENSE data. Refer to
+ * the SCSI standard documentation for more information on each SCSI command and
+ * the SENSE data.
+ */
+
+#ifndef _SCSI_CODES_H_
+#define _SCSI_CODES_H_
+
+ /* Macros: */
+ #define SCSI_CMD_INQUIRY 0x12
+ #define SCSI_CMD_REQUEST_SENSE 0x03
+ #define SCSI_CMD_TEST_UNIT_READY 0x00
+ #define SCSI_CMD_READ_CAPACITY_10 0x25
+ #define SCSI_CMD_SEND_DIAGNOSTIC 0x1D
+ #define SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E
+ #define SCSI_CMD_WRITE_10 0x2A
+ #define SCSI_CMD_READ_10 0x28
+ #define SCSI_CMD_WRITE_6 0x0A
+ #define SCSI_CMD_READ_6 0x08
+ #define SCSI_CMD_VERIFY_10 0x2F
+ #define SCSI_CMD_MODE_SENSE_6 0x1A
+ #define SCSI_CMD_MODE_SENSE_10 0x5A
+
+ #define SCSI_SENSE_KEY_GOOD 0x00
+ #define SCSI_SENSE_KEY_RECOVERED_ERROR 0x01
+ #define SCSI_SENSE_KEY_NOT_READY 0x02
+ #define SCSI_SENSE_KEY_MEDIUM_ERROR 0x03
+ #define SCSI_SENSE_KEY_HARDWARE_ERROR 0x04
+ #define SCSI_SENSE_KEY_ILLEGAL_REQUEST 0x05
+ #define SCSI_SENSE_KEY_UNIT_ATTENTION 0x06
+ #define SCSI_SENSE_KEY_DATA_PROTECT 0x07
+ #define SCSI_SENSE_KEY_BLANK_CHECK 0x08
+ #define SCSI_SENSE_KEY_VENDOR_SPECIFIC 0x09
+ #define SCSI_SENSE_KEY_COPY_ABORTED 0x0A
+ #define SCSI_SENSE_KEY_ABORTED_COMMAND 0x0B
+ #define SCSI_SENSE_KEY_VOLUME_OVERFLOW 0x0D
+ #define SCSI_SENSE_KEY_MISCOMPARE 0x0E
+
+ #define SCSI_ASENSE_NO_ADDITIONAL_INFORMATION 0x00
+ #define SCSI_ASENSE_LOGICAL_UNIT_NOT_READY 0x04
+ #define SCSI_ASENSE_INVALID_FIELD_IN_CDB 0x24
+ #define SCSI_ASENSE_WRITE_PROTECTED 0x27
+ #define SCSI_ASENSE_FORMAT_ERROR 0x31
+ #define SCSI_ASENSE_INVALID_COMMAND 0x20
+ #define SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x21
+ #define SCSI_ASENSE_MEDIUM_NOT_PRESENT 0x3A
+
+ #define SCSI_ASENSEQ_NO_QUALIFIER 0x00
+ #define SCSI_ASENSEQ_FORMAT_COMMAND_FAILED 0x01
+ #define SCSI_ASENSEQ_INITIALIZING_COMMAND_REQUIRED 0x02
+ #define SCSI_ASENSEQ_OPERATION_IN_PROGRESS 0x07
+
+#endif
|