1 files changed, 324 insertions, 324 deletions
diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c
index ddcd3ce8e..03d6799f5 100644
--- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c
+++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c
@@ -1,324 +1,324 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2010.
-              
-  dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
-*/
-
-/*
-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-	  
-  Permission to use, copy, modify, distribute, and sell this 
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
-  software without specific, written prior permission.
-
-  The author disclaim all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the KeyboardMouse demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
- 
-#include "KeyboardMouse.h"
-
-/** Global structure to hold the current keyboard interface HID report, for transmission to the host */
-USB_KeyboardReport_Data_t KeyboardReportData;
-
-/** Global structure to hold the current mouse interface HID report, for transmission to the host */
-USB_MouseReport_Data_t    MouseReportData;
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-	
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	sei();
-
-	for (;;)
-	{
-		Keyboard_HID_Task();
-		Mouse_HID_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs and stops the USB management task.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
- *  of the USB device after enumeration, and configures the keyboard and mouse device endpoints.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	/* Indicate USB connected and ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-
-	/* Setup Keyboard Report Endpoint */
-	if (!(Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT,
-		                             ENDPOINT_DIR_IN, HID_EPSIZE,
-	                                 ENDPOINT_BANK_SINGLE)))
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	}
-	
-	/* Setup Keyboard LED Report Endpoint */
-	if (!(Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPNUM, EP_TYPE_INTERRUPT,
-		                             ENDPOINT_DIR_OUT, HID_EPSIZE,
-	                                 ENDPOINT_BANK_SINGLE)))
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	}
-
-	/* Setup Mouse Report Endpoint */
-	if (!(Endpoint_ConfigureEndpoint(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT,
-		                             ENDPOINT_DIR_IN, HID_EPSIZE,
-	                                 ENDPOINT_BANK_SINGLE)))
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	}
-}
-
-/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific
- *  control requests that are not handled internally by the USB library (including the HID commands, which are
- *  all issued via the control endpoint), so that they can be handled appropriately for the application.
- */
-void EVENT_USB_Device_UnhandledControlRequest(void)
-{
-	uint8_t* ReportData;
-	uint8_t  ReportSize;
-
-	/* Handle HID Class specific requests */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case REQ_GetReport:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-	
-				/* Determine if it is the mouse or the keyboard data that is being requested */
-				if (!(USB_ControlRequest.wIndex))
-				{
-					ReportData = (uint8_t*)&KeyboardReportData;
-					ReportSize = sizeof(KeyboardReportData);
-				}
-				else
-				{
-					ReportData = (uint8_t*)&MouseReportData;
-					ReportSize = sizeof(MouseReportData);
-				}
-
-				/* Write the report data to the control endpoint */
-				Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
-
-				/* Clear the report data afterwards */
-				memset(ReportData, 0, ReportSize);
-				
-				/* Finalize the stream transfer to send the last packet or clear the host abort */
-				Endpoint_ClearOUT();
-			}
-		
-			break;
-		case REQ_SetReport:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-				
-				/* Wait until the LED report has been sent by the host */
-				while (!(Endpoint_IsOUTReceived()))
-				{
-					if (USB_DeviceState == DEVICE_STATE_Unattached)
-					  return;
-				}
-
-				/* Read in and process the LED report from the host */
-				Keyboard_ProcessLEDReport(Endpoint_Read_Byte());
-
-				/* Clear the endpoint data */
-				Endpoint_ClearOUT();
-
-				Endpoint_ClearStatusStage();
-			}
-			
-			break;
-	}
-}
-
-/** Processes a given Keyboard LED report from the host, and sets the board LEDs to match. Since the Keyboard
- *  LED report can be sent through either the control endpoint (via a HID SetReport request) or the HID OUT
- *  endpoint, the processing code is placed here to avoid duplicating it and potentially having different
- *  behaviour depending on the method used to sent it.
- */
-void Keyboard_ProcessLEDReport(const uint8_t LEDStatus)
-{
-	uint8_t LEDMask = LEDS_LED2;
-	
-	if (LEDStatus & KEYBOARD_LED_NUMLOCK)
-	  LEDMask |= LEDS_LED1;
-	
-	if (LEDStatus & KEYBOARD_LED_CAPSLOCK)
-	  LEDMask |= LEDS_LED3;
-
-	if (LEDStatus & KEYBOARD_LED_SCROLLLOCK)
-	  LEDMask |= LEDS_LED4;
-
-	/* Set the status LEDs to the current Keyboard LED status */
-	LEDs_SetAllLEDs(LEDMask);
-}
-
-/** Keyboard task. This generates the next keyboard HID report for the host, and transmits it via the
- *  keyboard IN endpoint when the host is ready for more data. Additionally, it processes host LED status
- *  reports sent to the device via the keyboard OUT reporting endpoint.
- */
-void Keyboard_HID_Task(void)
-{
-	uint8_t JoyStatus_LCL = Joystick_GetStatus();
-
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	/* Check if board button is not pressed, if so mouse mode enabled */
-	if (!(Buttons_GetStatus() & BUTTONS_BUTTON1))
-	{
-		/* Make sent key uppercase by indicating that the left shift key is pressed */
-		KeyboardReportData.Modifier = KEYBOARD_MODIFER_LEFTSHIFT;
-
-		if (JoyStatus_LCL & JOY_UP)
-		  KeyboardReportData.KeyCode[0] = 0x04; // A
-		else if (JoyStatus_LCL & JOY_DOWN)
-		  KeyboardReportData.KeyCode[0] = 0x05; // B
-
-		if (JoyStatus_LCL & JOY_LEFT)
-		  KeyboardReportData.KeyCode[0] = 0x06; // C
-		else if (JoyStatus_LCL & JOY_RIGHT)
-		  KeyboardReportData.KeyCode[0] = 0x07; // D
-
-		if (JoyStatus_LCL & JOY_PRESS)
-		  KeyboardReportData.KeyCode[0] = 0x08; // E
-	}
-
-	/* Select the Keyboard Report Endpoint */
-	Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM);
-
-	/* Check if Keyboard Endpoint Ready for Read/Write */
-	if (Endpoint_IsReadWriteAllowed())
-	{
-		/* Write Keyboard Report Data */
-		Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData));
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearIN();
-
-		/* Clear the report data afterwards */
-		memset(&KeyboardReportData, 0, sizeof(KeyboardReportData));
-	}
-
-	/* Select the Keyboard LED Report Endpoint */
-	Endpoint_SelectEndpoint(KEYBOARD_OUT_EPNUM);
-
-	/* Check if Keyboard LED Endpoint Ready for Read/Write */
-	if (Endpoint_IsReadWriteAllowed())
-	{		
-		/* Read in and process the LED report from the host */
-		Keyboard_ProcessLEDReport(Endpoint_Read_Byte());
-
-		/* Handshake the OUT Endpoint - clear endpoint and ready for next report */
-		Endpoint_ClearOUT();
-	}
-}
-
-/** Mouse task. This generates the next mouse HID report for the host, and transmits it via the
- *  mouse IN endpoint when the host is ready for more data.
- */
-void Mouse_HID_Task(void)
-{
-	uint8_t JoyStatus_LCL = Joystick_GetStatus();
-
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	/* Check if board button is pressed, if so mouse mode enabled */
-	if (Buttons_GetStatus() & BUTTONS_BUTTON1)
-	{
-		if (JoyStatus_LCL & JOY_UP)
-		  MouseReportData.Y =  1;
-		else if (JoyStatus_LCL & JOY_DOWN)
-		  MouseReportData.Y = -1;
-
-		if (JoyStatus_LCL & JOY_RIGHT)
-		  MouseReportData.X =  1;
-		else if (JoyStatus_LCL & JOY_LEFT)
-		  MouseReportData.X = -1;
-
-		if (JoyStatus_LCL & JOY_PRESS)
-		  MouseReportData.Button  = (1 << 0);
-	}
-
-	/* Select the Mouse Report Endpoint */
-	Endpoint_SelectEndpoint(MOUSE_IN_EPNUM);
-
-	/* Check if Mouse Endpoint Ready for Read/Write */
-	if (Endpoint_IsReadWriteAllowed())
-	{
-		/* Write Mouse Report Data */
-		Endpoint_Write_Stream_LE(&MouseReportData, sizeof(MouseReportData));
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearIN();
-
-		/* Clear the report data afterwards */
-		memset(&MouseReportData, 0, sizeof(MouseReportData));
-	}
-}
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2010.
+              
+  dean [at] fourwalledcubicle [dot] com
+      www.fourwalledcubicle.com
+*/
+
+/*
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
+	  
+  Permission to use, copy, modify, distribute, and sell this 
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in 
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting 
+  documentation, and that the name of the author not be used in 
+  advertising or publicity pertaining to distribution of the 
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the KeyboardMouse demo. This file contains the main tasks of the demo and
+ *  is responsible for the initial application hardware configuration.
+ */
+ 
+#include "KeyboardMouse.h"
+
+/** Global structure to hold the current keyboard interface HID report, for transmission to the host */
+USB_KeyboardReport_Data_t KeyboardReportData;
+
+/** Global structure to hold the current mouse interface HID report, for transmission to the host */
+USB_MouseReport_Data_t    MouseReportData;
+
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+	
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	sei();
+
+	for (;;)
+	{
+		Keyboard_HID_Task();
+		Mouse_HID_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+
+	/* Hardware Initialization */
+	Joystick_Init();
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+	/* Indicate USB enumerating */
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs and stops the USB management task.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	/* Indicate USB not ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
+ *  of the USB device after enumeration, and configures the keyboard and mouse device endpoints.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	/* Indicate USB connected and ready */
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+
+	/* Setup Keyboard Report Endpoint */
+	if (!(Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT,
+		                             ENDPOINT_DIR_IN, HID_EPSIZE,
+	                                 ENDPOINT_BANK_SINGLE)))
+	{
+		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	}
+	
+	/* Setup Keyboard LED Report Endpoint */
+	if (!(Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPNUM, EP_TYPE_INTERRUPT,
+		                             ENDPOINT_DIR_OUT, HID_EPSIZE,
+	                                 ENDPOINT_BANK_SINGLE)))
+	{
+		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	}
+
+	/* Setup Mouse Report Endpoint */
+	if (!(Endpoint_ConfigureEndpoint(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT,
+		                             ENDPOINT_DIR_IN, HID_EPSIZE,
+	                                 ENDPOINT_BANK_SINGLE)))
+	{
+		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	}
+}
+
+/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific
+ *  control requests that are not handled internally by the USB library (including the HID commands, which are
+ *  all issued via the control endpoint), so that they can be handled appropriately for the application.
+ */
+void EVENT_USB_Device_UnhandledControlRequest(void)
+{
+	uint8_t* ReportData;
+	uint8_t  ReportSize;
+
+	/* Handle HID Class specific requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case REQ_GetReport:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+	
+				/* Determine if it is the mouse or the keyboard data that is being requested */
+				if (!(USB_ControlRequest.wIndex))
+				{
+					ReportData = (uint8_t*)&KeyboardReportData;
+					ReportSize = sizeof(KeyboardReportData);
+				}
+				else
+				{
+					ReportData = (uint8_t*)&MouseReportData;
+					ReportSize = sizeof(MouseReportData);
+				}
+
+				/* Write the report data to the control endpoint */
+				Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
+
+				/* Clear the report data afterwards */
+				memset(ReportData, 0, ReportSize);
+				
+				/* Finalize the stream transfer to send the last packet or clear the host abort */
+				Endpoint_ClearOUT();
+			}
+		
+			break;
+		case REQ_SetReport:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+				
+				/* Wait until the LED report has been sent by the host */
+				while (!(Endpoint_IsOUTReceived()))
+				{
+					if (USB_DeviceState == DEVICE_STATE_Unattached)
+					  return;
+				}
+
+				/* Read in and process the LED report from the host */
+				Keyboard_ProcessLEDReport(Endpoint_Read_Byte());
+
+				/* Clear the endpoint data */
+				Endpoint_ClearOUT();
+
+				Endpoint_ClearStatusStage();
+			}
+			
+			break;
+	}
+}
+
+/** Processes a given Keyboard LED report from the host, and sets the board LEDs to match. Since the Keyboard
+ *  LED report can be sent through either the control endpoint (via a HID SetReport request) or the HID OUT
+ *  endpoint, the processing code is placed here to avoid duplicating it and potentially having different
+ *  behaviour depending on the method used to sent it.
+ */
+void Keyboard_ProcessLEDReport(const uint8_t LEDStatus)
+{
+	uint8_t LEDMask = LEDS_LED2;
+	
+	if (LEDStatus & KEYBOARD_LED_NUMLOCK)
+	  LEDMask |= LEDS_LED1;
+	
+	if (LEDStatus & KEYBOARD_LED_CAPSLOCK)
+	  LEDMask |= LEDS_LED3;
+
+	if (LEDStatus & KEYBOARD_LED_SCROLLLOCK)
+	  LEDMask |= LEDS_LED4;
+
+	/* Set the status LEDs to the current Keyboard LED status */
+	LEDs_SetAllLEDs(LEDMask);
+}
+
+/** Keyboard task. This generates the next keyboard HID report for the host, and transmits it via the
+ *  keyboard IN endpoint when the host is ready for more data. Additionally, it processes host LED status
+ *  reports sent to the device via the keyboard OUT reporting endpoint.
+ */
+void Keyboard_HID_Task(void)
+{
+	uint8_t JoyStatus_LCL = Joystick_GetStatus();
+
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	/* Check if board button is not pressed, if so mouse mode enabled */
+	if (!(Buttons_GetStatus() & BUTTONS_BUTTON1))
+	{
+		/* Make sent key uppercase by indicating that the left shift key is pressed */
+		KeyboardReportData.Modifier = KEYBOARD_MODIFER_LEFTSHIFT;
+
+		if (JoyStatus_LCL & JOY_UP)
+		  KeyboardReportData.KeyCode[0] = 0x04; // A
+		else if (JoyStatus_LCL & JOY_DOWN)
+		  KeyboardReportData.KeyCode[0] = 0x05; // B
+
+		if (JoyStatus_LCL & JOY_LEFT)
+		  KeyboardReportData.KeyCode[0] = 0x06; // C
+		else if (JoyStatus_LCL & JOY_RIGHT)
+		  KeyboardReportData.KeyCode[0] = 0x07; // D
+
+		if (JoyStatus_LCL & JOY_PRESS)
+		  KeyboardReportData.KeyCode[0] = 0x08; // E
+	}
+
+	/* Select the Keyboard Report Endpoint */
+	Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM);
+
+	/* Check if Keyboard Endpoint Ready for Read/Write */
+	if (Endpoint_IsReadWriteAllowed())
+	{
+		/* Write Keyboard Report Data */
+		Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData));
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearIN();
+
+		/* Clear the report data afterwards */
+		memset(&KeyboardReportData, 0, sizeof(KeyboardReportData));
+	}
+
+	/* Select the Keyboard LED Report Endpoint */
+	Endpoint_SelectEndpoint(KEYBOARD_OUT_EPNUM);
+
+	/* Check if Keyboard LED Endpoint Ready for Read/Write */
+	if (Endpoint_IsReadWriteAllowed())
+	{		
+		/* Read in and process the LED report from the host */
+		Keyboard_ProcessLEDReport(Endpoint_Read_Byte());
+
+		/* Handshake the OUT Endpoint - clear endpoint and ready for next report */
+		Endpoint_ClearOUT();
+	}
+}
+
+/** Mouse task. This generates the next mouse HID report for the host, and transmits it via the
+ *  mouse IN endpoint when the host is ready for more data.
+ */
+void Mouse_HID_Task(void)
+{
+	uint8_t JoyStatus_LCL = Joystick_GetStatus();
+
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	/* Check if board button is pressed, if so mouse mode enabled */
+	if (Buttons_GetStatus() & BUTTONS_BUTTON1)
+	{
+		if (JoyStatus_LCL & JOY_UP)
+		  MouseReportData.Y =  1;
+		else if (JoyStatus_LCL & JOY_DOWN)
+		  MouseReportData.Y = -1;
+
+		if (JoyStatus_LCL & JOY_RIGHT)
+		  MouseReportData.X =  1;
+		else if (JoyStatus_LCL & JOY_LEFT)
+		  MouseReportData.X = -1;
+
+		if (JoyStatus_LCL & JOY_PRESS)
+		  MouseReportData.Button  = (1 << 0);
+	}
+
+	/* Select the Mouse Report Endpoint */
+	Endpoint_SelectEndpoint(MOUSE_IN_EPNUM);
+
+	/* Check if Mouse Endpoint Ready for Read/Write */
+	if (Endpoint_IsReadWriteAllowed())
+	{
+		/* Write Mouse Report Data */
+		Endpoint_Write_Stream_LE(&MouseReportData, sizeof(MouseReportData));
+
+		/* Finalize the stream transfer to send the last packet */
+		Endpoint_ClearIN();
+
+		/* Clear the report data afterwards */
+		memset(&MouseReportData, 0, sizeof(MouseReportData));
+	}
+}