diff options
Diffstat (limited to 'Demos/Device/ClassDriver')
112 files changed, 2094 insertions, 1986 deletions
diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.c b/Demos/Device/ClassDriver/AudioInput/AudioInput.c index ceaeb89a1..dc7a076e4 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.c +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -60,7 +60,7 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { ProcessNextSample(); @@ -79,13 +79,13 @@ void SetupHardware(void) /* Disable clock division */ clock_prescale_set(clock_div_1); - + /* Hardware Initialization */ LEDs_Init(); USB_Init(); ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32); ADC_SetupChannel(MIC_IN_ADC_CHANNEL); - + /* Start the ADC conversion in free running mode */ ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | MIC_IN_ADC_MUX_MASK); } @@ -103,7 +103,7 @@ void ProcessNextSample(void) /* Audio sample is ADC value scaled to fit the entire range */ int16_t AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult()); - + #if defined(MICROPHONE_BIASED_TO_HALF_RAIL) /* Microphone is biased to half rail voltage, subtract the bias from the sample value */ AudioSample -= (SAMPLE_MAX_RANGE / 2); @@ -148,3 +148,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { Audio_Device_ProcessControlRequest(&Microphone_Audio_Interface); } + diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.h b/Demos/Device/ClassDriver/AudioInput/AudioInput.h index 9231f8962..8ed6096f0 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.h +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for AudioInput.c. */ - + #ifndef _AUDIO_INPUT_H_ #define _AUDIO_INPUT_H_ @@ -53,7 +53,7 @@ /* Macros: */ /** ADC channel number for the microphone input. */ #define MIC_IN_ADC_CHANNEL 2 - + /** ADC channel MUX mask for the microphone input. */ #define MIC_IN_ADC_MUX_MASK ADC_CHANNEL2 @@ -85,3 +85,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void); #endif + diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt index aba582d67..830163f3b 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Audio Input Device Demo * * \section SSec_Compat Demo Compatibility: @@ -27,7 +27,7 @@ * <td><b>USB Class:</b></td> * <td>Audio Class</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Standard Audio Device</td> * </tr> @@ -43,19 +43,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Audio demonstration application. This gives a simple reference * application for implementing a USB Audio Input device using the * basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers * required). - * + * * On start-up the system will automatically enumerate and function * as a USB microphone. Incoming audio from the ADC channel 1 will * be sampled and sent to the host computer. - * + * * To use, connect a microphone to the ADC channel 1. - * + * * Under Windows, if a driver request dialogue pops up, select the option * to automatically install the appropriate drivers. * @@ -81,3 +81,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/AudioInput/Descriptors.c b/Demos/Device/ClassDriver/AudioInput/Descriptors.c index c01e10129..8ac88bd82 100644 --- a/Demos/Device/ClassDriver/AudioInput/Descriptors.c +++ b/Demos/Device/ClassDriver/AudioInput/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,11 +30,11 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ - + #include "Descriptors.h" /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -71,7 +71,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, @@ -86,13 +86,13 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - .Audio_ControlInterface = + .Audio_ControlInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 0, .Class = 0x01, @@ -102,7 +102,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .InterfaceStrIndex = NO_DESCRIPTOR }, - .Audio_ControlInterface_SPC = + .Audio_ControlInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_Header, @@ -111,12 +111,12 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .TotalLength = (sizeof(USB_Audio_Descriptor_Interface_AC_t) + sizeof(USB_Audio_Descriptor_InputTerminal_t) + sizeof(USB_Audio_Descriptor_OutputTerminal_t)), - + .InCollection = 1, .InterfaceNumber = 1, }, - .Audio_InputTerminal = + .Audio_InputTerminal = { .Header = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal, @@ -132,7 +132,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_OutputTerminal = + .Audio_OutputTerminal = { .Header = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal, @@ -146,7 +146,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt0 = + .Audio_StreamInterface_Alt0 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, @@ -162,7 +162,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .InterfaceStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt1 = + .Audio_StreamInterface_Alt1 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, @@ -178,7 +178,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .InterfaceStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_SPC = + .Audio_StreamInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_General, @@ -189,24 +189,24 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .AudioFormat = 0x0001 }, - .Audio_AudioFormat = + .Audio_AudioFormat = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Format_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_FormatType, .FormatType = 0x01, .Channels = 0x01, - + .SubFrameSize = 0x02, .BitResolution = 16, .SampleFrequencyType = AUDIO_TOTAL_SAMPLE_RATES, - + .SampleFrequencies = {AUDIO_SAMPLE_FREQ(AUDIO_SAMPLE_FREQUENCY)} }, - - .Audio_StreamEndpoint = + + .Audio_StreamEndpoint = { - .Endpoint = + .Endpoint = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, @@ -215,18 +215,18 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 1 }, - + .Refresh = 0, .SyncEndpointNumber = 0 }, - - .Audio_StreamEndpoint_SPC = + + .Audio_StreamEndpoint_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint}, .Subtype = AUDIO_DSUBTYPE_CSEndpoint_General, - + .Attributes = AUDIO_EP_ACCEPTS_SMALL_PACKETS, - + .LockDelayUnits = 0x00, .LockDelay = 0x0000 } @@ -287,30 +287,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/AudioInput/Descriptors.h b/Demos/Device/ClassDriver/AudioInput/Descriptors.h index caf6075cc..5ca7afbf5 100644 --- a/Demos/Device/ClassDriver/AudioInput/Descriptors.h +++ b/Demos/Device/ClassDriver/AudioInput/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -45,7 +45,7 @@ /* Macros: */ /** Endpoint number of the Audio isochronous streaming data endpoint. */ #define AUDIO_STREAM_EPNUM 1 - + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller * USB AVR models will result in unavoidable distorted output. @@ -82,3 +82,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile index 636637dbc..8eda3c68b 100644 --- a/Demos/Device/ClassDriver/AudioInput/makefile +++ b/Demos/Device/ClassDriver/AudioInput/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -137,7 +137,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -150,7 +150,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -264,7 +264,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -277,7 +277,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -289,7 +289,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -301,7 +301,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -324,7 +324,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -358,7 +358,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -392,7 +392,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -421,7 +421,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -440,10 +440,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -508,11 +508,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -539,9 +539,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -639,14 +639,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -668,7 +668,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -712,3 +712,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c index cf2eb2d30..33b52a184 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -60,7 +60,7 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { ProcessNextSample(); @@ -135,7 +135,7 @@ void ProcessNextSample(void) void EVENT_USB_Device_Connect(void) { LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + /* Sample reload timer initialization */ OCR0A = (F_CPU / 8 / AUDIO_SAMPLE_FREQUENCY) - 1; TCCR0A = (1 << WGM01); // CTC mode @@ -200,3 +200,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { Audio_Device_ProcessControlRequest(&Speaker_Audio_Interface); } + diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h index 5a7b2efe8..62498cb7f 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -44,13 +44,13 @@ #include <stdlib.h> #include "Descriptors.h" - + #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/Audio.h> - - /* Macros: */ + + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -62,14 +62,15 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void ProcessNextSample(void); - + void EVENT_USB_Device_Connect(void); void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); #endif + diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt index 079b537b0..c42fc744b 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Audio Output Device Demo * * \section SSec_Compat Demo Compatibility: @@ -27,7 +27,7 @@ * <td><b>USB Class:</b></td> * <td>Audio Class</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Standard Audio Device</td> * </tr> @@ -43,13 +43,13 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Audio demonstration application. This gives a simple reference * application for implementing a USB Audio Output device using the * basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers * required). - * + * * On start-up the system will automatically enumerate and function * as a USB speaker. Outgoing audio will output in 8-bit PWM onto * the timer 3 output compare channel A for AUDIO_OUT_MONO mode, on @@ -57,7 +57,7 @@ * mono sample for AUDIO_OUT_PORTC. Audio output will also be indicated on * the board LEDs in all modes. Decouple audio outputs with a capacitor and * attach to a speaker to hear the audio. - * + * * Under Windows, if a driver request dialogue pops up, select the option * to automatically install the appropriate drivers. * @@ -94,3 +94,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/AudioOutput/Descriptors.c b/Demos/Device/ClassDriver/AudioOutput/Descriptors.c index b82d5ab22..35ceeb29a 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Descriptors.c +++ b/Demos/Device/ClassDriver/AudioOutput/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,11 +30,11 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ - + #include "Descriptors.h" /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -71,7 +71,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, @@ -80,133 +80,133 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .Audio_ControlInterface = + + .Audio_ControlInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 0, - + .Class = 0x01, .SubClass = 0x01, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_ControlInterface_SPC = + + .Audio_ControlInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_Header, - + .ACSpecification = VERSION_BCD(01.00), .TotalLength = (sizeof(USB_Audio_Descriptor_Interface_AC_t) + sizeof(USB_Audio_Descriptor_InputTerminal_t) + sizeof(USB_Audio_Descriptor_OutputTerminal_t)), - + .InCollection = 1, .InterfaceNumber = 1, }, - .Audio_InputTerminal = + .Audio_InputTerminal = { .Header = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal, - + .TerminalID = 0x01, .TerminalType = AUDIO_TERMINAL_STREAMING, .AssociatedOutputTerminal = 0x00, - + .TotalChannels = 2, .ChannelConfig = (AUDIO_CHANNEL_LEFT_FRONT | AUDIO_CHANNEL_RIGHT_FRONT), - + .ChannelStrIndex = NO_DESCRIPTOR, .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_OutputTerminal = + .Audio_OutputTerminal = { .Header = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal, - + .TerminalID = 0x02, .TerminalType = AUDIO_TERMINAL_OUT_SPEAKER, .AssociatedInputTerminal = 0x00, - + .SourceID = 0x01, - + .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt0 = + .Audio_StreamInterface_Alt0 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 0, - + .Class = 0x01, .SubClass = 0x02, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt1 = + .Audio_StreamInterface_Alt1 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 1, - + .TotalEndpoints = 1, - + .Class = 0x01, .SubClass = 0x02, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_StreamInterface_SPC = + + .Audio_StreamInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_General, - + .TerminalLink = 0x01, - + .FrameDelay = 1, .AudioFormat = 0x0001 }, - - .Audio_AudioFormat = + + .Audio_AudioFormat = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Format_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_FormatType, .FormatType = 0x01, .Channels = 0x02, - + .SubFrameSize = 0x02, .BitResolution = 16, - .SampleFrequencyType = AUDIO_TOTAL_SAMPLE_RATES, + .SampleFrequencyType = AUDIO_TOTAL_SAMPLE_RATES, .SampleFrequencies = {AUDIO_SAMPLE_FREQ(AUDIO_SAMPLE_FREQUENCY)} }, - - .Audio_StreamEndpoint = + + .Audio_StreamEndpoint = { - .Endpoint = + .Endpoint = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, @@ -215,18 +215,18 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 1 }, - + .Refresh = 0, .SyncEndpointNumber = 0 }, - - .Audio_StreamEndpoint_SPC = + + .Audio_StreamEndpoint_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint}, .Subtype = AUDIO_DSUBTYPE_CSEndpoint_General, - + .Attributes = AUDIO_EP_ACCEPTS_SMALL_PACKETS, - + .LockDelayUnits = 0x00, .LockDelay = 0x0000 } @@ -291,26 +291,27 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h index 588f584e9..5ca7afbf5 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h +++ b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -45,16 +45,16 @@ /* Macros: */ /** Endpoint number of the Audio isochronous streaming data endpoint. */ #define AUDIO_STREAM_EPNUM 1 - + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller * USB AVR models will result in unavoidable distorted output. */ #define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM) - + /** Sample frequency of the data being transmitted through the streaming endpoint. */ #define AUDIO_SAMPLE_FREQUENCY 48000 - + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which @@ -74,7 +74,7 @@ USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint; USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC; } USB_Descriptor_Configuration_t; - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, @@ -82,3 +82,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile index 660399b43..9ff71b2e1 100644 --- a/Demos/Device/ClassDriver/AudioOutput/makefile +++ b/Demos/Device/ClassDriver/AudioOutput/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -139,7 +139,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -152,7 +152,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -266,7 +266,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -279,7 +279,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -291,7 +291,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -303,7 +303,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -326,7 +326,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -360,7 +360,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -394,7 +394,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -423,7 +423,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -442,10 +442,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -510,11 +510,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -541,9 +541,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -641,14 +641,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -670,7 +670,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -714,3 +714,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c index 592f488b9..775ab0828 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -57,22 +57,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0xEF, .SubClass = 0x02, .Protocol = 0x01, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x204E, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = USE_INTERNAL_SERIAL, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -83,22 +83,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 4, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .CDC1_IAD = + + .CDC1_IAD = { .Header = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation}, @@ -112,94 +112,94 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .IADStrIndex = NO_DESCRIPTOR }, - .CDC1_CCI_Interface = + .CDC1_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC1_Functional_Header = + .CDC1_Functional_Header = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Header, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC1_Functional_ACM = + .CDC1_Functional_ACM = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_ACM, - + .Capabilities = 0x06, }, - - .CDC1_Functional_Union = + + .CDC1_Functional_Union = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Union, - + .MasterInterfaceNumber = 0, .SlaveInterfaceNumber = 1, }, - .CDC1_ManagementEndpoint = + .CDC1_ManagementEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF }, - .CDC1_DCI_Interface = + .CDC1_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC1_DataOutEndpoint = + .CDC1_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC1_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .CDC1_DataInEndpoint = + + .CDC1_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - .CDC2_IAD = + .CDC2_IAD = { .Header = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation}, @@ -213,87 +213,87 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .IADStrIndex = NO_DESCRIPTOR }, - .CDC2_CCI_Interface = + .CDC2_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 2, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC2_Functional_Header = + .CDC2_Functional_Header = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Header, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC2_Functional_ACM = + .CDC2_Functional_ACM = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_ACM, - + .Capabilities = 0x06, }, - - .CDC2_Functional_Union = + + .CDC2_Functional_Union = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Union, - + .MasterInterfaceNumber = 2, .SlaveInterfaceNumber = 3, }, - .CDC2_ManagementEndpoint = + .CDC2_ManagementEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF }, - .CDC2_DCI_Interface = + .CDC2_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 3, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC2_DataOutEndpoint = + .CDC2_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC2_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .CDC2_DataInEndpoint = + + .CDC2_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, @@ -356,30 +356,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h index 5c1bf53bb..fba85e805 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -102,3 +102,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c index 915c8fc98..c6e7b423e 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c +++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -92,7 +92,7 @@ USB_ClassInfo_CDC_Device_t VirtualSerial2_CDC_Interface = int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); @@ -107,7 +107,7 @@ int main(void) int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial2_CDC_Interface); if (!(ReceivedByte < 0)) CDC_Device_SendByte(&VirtualSerial2_CDC_Interface, (uint8_t)ReceivedByte); - + CDC_Device_USBTask(&VirtualSerial1_CDC_Interface); CDC_Device_USBTask(&VirtualSerial2_CDC_Interface); USB_USBTask(); @@ -151,12 +151,12 @@ void CheckJoystickMovement(void) ReportString = "Joystick Pressed\r\n"; else ActionSent = false; - + if ((ReportString != NULL) && (ActionSent == false)) { ActionSent = true; - - CDC_Device_SendString(&VirtualSerial1_CDC_Interface, ReportString, strlen(ReportString)); + + CDC_Device_SendString(&VirtualSerial1_CDC_Interface, ReportString, strlen(ReportString)); } } @@ -189,3 +189,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void) CDC_Device_ProcessControlRequest(&VirtualSerial1_CDC_Interface); CDC_Device_ProcessControlRequest(&VirtualSerial2_CDC_Interface); } + diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h index e1ac0bb5a..eccb4d859 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h +++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -63,7 +63,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void CheckJoystickMovement(void); @@ -74,3 +74,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void); #endif + diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt index 3959f89c4..662ec9199 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt +++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Dual Communications Device Class (Dual Virtual Serial Port) Device * * \section SSec_Compat Demo Compatibility: @@ -27,7 +27,7 @@ * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Abstract Control Model (ACM)</td> * </tr> @@ -46,7 +46,7 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Dual Communications Device Class demonstration application. * This gives a simple reference application for implementing @@ -56,13 +56,13 @@ * descriptors for each virtual serial port, which may not be * supported in all OSes - Windows Vista is supported, as is * XP (although the latter may need a hotfix to function). - * + * * Joystick actions are transmitted to the host as strings * through the first serial port. The device does not respond to * serial data sent from the host in the first serial port. - * + * * The second serial port echoes back data sent from the host. - * + * * After running this demo for the first time on a new computer, * you will need to supply the .INF file located in this demo * project's directory as the device's driver when running under @@ -83,3 +83,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile index 880afe691..c9c034924 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile +++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/GenericHID/Descriptors.c b/Demos/Device/ClassDriver/GenericHID/Descriptors.c index 2d9ec83a8..1e78837cd 100644 --- a/Demos/Device/ClassDriver/GenericHID/Descriptors.c +++ b/Demos/Device/ClassDriver/GenericHID/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -71,22 +71,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x204F, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -97,41 +97,41 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID_Interface = + + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x00, .Protocol = HID_BOOTP_NonBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_GenericHID = + .HID_GenericHID = { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, @@ -139,10 +139,10 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .HIDReportLength = sizeof(GenericReport) }, - .HID_ReportINEndpoint = + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | GENERIC_IN_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = GENERIC_EPSIZE, @@ -157,7 +157,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -168,7 +168,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -179,7 +179,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(21), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Generic HID Demo" }; @@ -205,38 +205,39 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case HID_DTYPE_HID: + case HID_DTYPE_HID: Address = &ConfigurationDescriptor.HID_GenericHID; Size = sizeof(USB_HID_Descriptor_HID_t); break; - case HID_DTYPE_Report: + case HID_DTYPE_Report: Address = &GenericReport; Size = sizeof(GenericReport); break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/GenericHID/Descriptors.h b/Demos/Device/ClassDriver/GenericHID/Descriptors.h index 23396f3f5..de427e626 100644 --- a/Demos/Device/ClassDriver/GenericHID/Descriptors.h +++ b/Demos/Device/ClassDriver/GenericHID/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -61,14 +61,15 @@ /** Size in bytes of the Generic HID reporting endpoint. */ #define GENERIC_EPSIZE 8 - + /** Size in bytes of the Generic HID reports (including report ID byte). */ #define GENERIC_REPORT_SIZE 8 - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, const void** const DescriptorAddress) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); - + #endif + diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.c b/Demos/Device/ClassDriver/GenericHID/GenericHID.c index d64c1648e..d982d94a9 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.c +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -60,7 +60,7 @@ USB_ClassInfo_HID_Device_t Generic_HID_Interface = .ReportINEndpointNumber = GENERIC_IN_EPNUM, .ReportINEndpointSize = GENERIC_EPSIZE, .ReportINEndpointDoubleBank = false, - + .PrevReportINBuffer = PrevHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevHIDReportBuffer), }, @@ -72,10 +72,10 @@ USB_ClassInfo_HID_Device_t Generic_HID_Interface = int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { HID_Device_USBTask(&Generic_HID_Interface); @@ -101,7 +101,7 @@ void SetupHardware(void) /** Event handler for the library USB Connection event. */ void EVENT_USB_Device_Connect(void) { - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); } /** Event handler for the library USB Disconnection event. */ @@ -154,7 +154,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn *ReportID = HIDReportEcho.ReportID; memcpy(ReportData, HIDReportEcho.ReportData, HIDReportEcho.ReportSize); - + *ReportSize = HIDReportEcho.ReportSize; return true; } @@ -177,3 +177,4 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI HIDReportEcho.ReportSize = ReportSize; memcpy(HIDReportEcho.ReportData, ReportData, ReportSize); } + diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.h b/Demos/Device/ClassDriver/GenericHID/GenericHID.h index e61e9571f..28a2c440e 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.h +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for GenericHID.c. */ - + #ifndef _GENERICHID_H_ #define _GENERICHID_H_ @@ -42,7 +42,7 @@ #include <avr/power.h> #include <avr/interrupt.h> #include <string.h> - + #include "Descriptors.h" #include <LUFA/Version.h> @@ -78,9 +78,10 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); - + #endif + diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt index b73a9512d..60920c7fb 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Generic HID Device * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -44,19 +44,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Generic HID device demonstration application. This gives a simple reference application * for implementing a generic HID device, using the basic USB HID drivers in all modern * OSes (i.e. no special drivers required). By default it accepts and sends up to 8 byte reports * to and from a USB Host, and transmits the last sent report back to the host. - * + * * On start-up the system will automatically enumerate and function as a vendor HID device. * When controlled by a custom HID class application, reports can be sent and received by * both the standard data endpoint and control request methods defined in the HID specification. * * \section SSec_Options Project Options - * + * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> @@ -73,3 +73,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile index e38cb96ad..5c7e78ee7 100644 --- a/Demos/Device/ClassDriver/GenericHID/makefile +++ b/Demos/Device/ClassDriver/GenericHID/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/Joystick/Descriptors.c b/Demos/Device/ClassDriver/Joystick/Descriptors.c index 6000e0e20..4b8dae4f5 100644 --- a/Demos/Device/ClassDriver/Joystick/Descriptors.c +++ b/Demos/Device/ClassDriver/Joystick/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -81,22 +81,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM JoystickReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2043, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -107,41 +107,41 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID_Interface = + + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x00, .Protocol = HID_BOOTP_NonBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_JoystickHID = + .HID_JoystickHID = { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, @@ -149,15 +149,15 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .HIDReportLength = sizeof(JoystickReport) }, - .HID_ReportINEndpoint = + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | JOYSTICK_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = JOYSTICK_EPSIZE, .PollingIntervalMS = 0x0A - } + } }; /** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests @@ -167,7 +167,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -178,7 +178,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -189,7 +189,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Joystick Demo" }; @@ -215,38 +215,39 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case HID_DTYPE_HID: + case HID_DTYPE_HID: Address = &ConfigurationDescriptor.HID_JoystickHID; Size = sizeof(USB_HID_Descriptor_HID_t); break; - case HID_DTYPE_Report: + case HID_DTYPE_Report: Address = &JoystickReport; Size = sizeof(JoystickReport); break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/Joystick/Descriptors.h b/Demos/Device/ClassDriver/Joystick/Descriptors.h index 0d7d45660..878b0380c 100644 --- a/Demos/Device/ClassDriver/Joystick/Descriptors.h +++ b/Demos/Device/ClassDriver/Joystick/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -69,3 +69,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.c b/Demos/Device/ClassDriver/Joystick/Joystick.c index c759e1346..72cff3606 100644 --- a/Demos/Device/ClassDriver/Joystick/Joystick.c +++ b/Demos/Device/ClassDriver/Joystick/Joystick.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -64,10 +64,10 @@ USB_ClassInfo_HID_Device_t Joystick_HID_Interface = int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { HID_Device_USBTask(&Joystick_HID_Interface); @@ -145,7 +145,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn uint16_t* const ReportSize) { USB_JoystickReport_Data_t* JoystickReport = (USB_JoystickReport_Data_t*)ReportData; - + uint8_t JoyStatus_LCL = Joystick_GetStatus(); uint8_t ButtonStatus_LCL = Buttons_GetStatus(); @@ -161,10 +161,10 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) JoystickReport->Button = (1 << 1); - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) JoystickReport->Button |= (1 << 0); - + *ReportSize = sizeof(USB_JoystickReport_Data_t); return false; } @@ -185,3 +185,4 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI { // Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports } + diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.h b/Demos/Device/ClassDriver/Joystick/Joystick.h index a8151cdf1..821400196 100644 --- a/Demos/Device/ClassDriver/Joystick/Joystick.h +++ b/Demos/Device/ClassDriver/Joystick/Joystick.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Joystick.c. */ - + #ifndef _JOYSTICK_H_ #define _JOYSTICK_H_ @@ -62,7 +62,7 @@ int8_t Y; /**< Current absolute joystick Y position, as a signed 8-bit integer */ uint8_t Button; /**< Bit mask of the currently pressed joystick buttons */ } USB_JoystickReport_Data_t; - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -91,9 +91,10 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); #endif + diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.txt b/Demos/Device/ClassDriver/Joystick/Joystick.txt index 5b1495cbc..0a8dff697 100644 --- a/Demos/Device/ClassDriver/Joystick/Joystick.txt +++ b/Demos/Device/ClassDriver/Joystick/Joystick.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Joystick Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -44,19 +44,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Joystick demonstration application. This gives a simple reference * application for implementing a USB Keyboard device, for USB Joysticks * using the standard Keyboard HID profile. - * + * * This device will show up as a generic joystick device, with two buttons. * Pressing the joystick inwards is the first button, and the HWB button * is the second. - * + * * Moving the joystick on the selected board moves the joystick location on * the host computer. - * + * * Currently only single interface joysticks are supported. * * \section SSec_Options Project Options @@ -71,3 +71,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile index 40debcb4c..ff8ffea13 100644 --- a/Demos/Device/ClassDriver/Joystick/makefile +++ b/Demos/Device/ClassDriver/Joystick/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/Keyboard/Descriptors.c b/Demos/Device/ClassDriver/Keyboard/Descriptors.c index 3b2acdd7f..90952ef17 100644 --- a/Demos/Device/ClassDriver/Keyboard/Descriptors.c +++ b/Demos/Device/ClassDriver/Keyboard/Descriptors.c @@ -1,21 +1,21 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -87,22 +87,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2042, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -113,49 +113,49 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID_Interface = + + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = HID_BOOTP_KeyboardBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_KeyboardHID = - { + .HID_KeyboardHID = + { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, .HIDReportType = HID_DTYPE_Report, .HIDReportLength = sizeof(KeyboardReport) }, - - .HID_ReportINEndpoint = + + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -173,7 +173,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -184,7 +184,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -195,7 +195,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Keyboard Demo" }; @@ -217,42 +217,43 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case HID_DTYPE_HID: + case HID_DTYPE_HID: Address = &ConfigurationDescriptor.HID_KeyboardHID; Size = sizeof(USB_HID_Descriptor_HID_t); break; - case HID_DTYPE_Report: + case HID_DTYPE_Report: Address = &KeyboardReport; Size = sizeof(KeyboardReport); break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/Keyboard/Descriptors.h b/Demos/Device/ClassDriver/Keyboard/Descriptors.h index 25629fd64..d94beb718 100644 --- a/Demos/Device/ClassDriver/Keyboard/Descriptors.h +++ b/Demos/Device/ClassDriver/Keyboard/Descriptors.h @@ -1,21 +1,21 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -54,12 +54,12 @@ USB_HID_Descriptor_HID_t HID_KeyboardHID; USB_Descriptor_Endpoint_t HID_ReportINEndpoint; } USB_Descriptor_Configuration_t; - + /* Macros: */ /** Endpoint number of the Keyboard HID reporting IN endpoint. */ #define KEYBOARD_EPNUM 1 - - /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */ + + /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */ #define KEYBOARD_EPSIZE 8 /* Function Prototypes: */ @@ -69,3 +69,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.c b/Demos/Device/ClassDriver/Keyboard/Keyboard.c index 755c25a72..33f52d662 100644 --- a/Demos/Device/ClassDriver/Keyboard/Keyboard.c +++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -67,7 +67,7 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { HID_Device_USBTask(&Keyboard_HID_Interface); @@ -142,12 +142,12 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn const uint8_t ReportType, void* ReportData, uint16_t* const ReportSize) { USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData; - + uint8_t JoyStatus_LCL = Joystick_GetStatus(); uint8_t ButtonStatus_LCL = Buttons_GetStatus(); uint8_t UsedKeyCodes = 0; - + if (JoyStatus_LCL & JOY_UP) KeyboardReport->KeyCode[UsedKeyCodes++] = 0x04; // A else if (JoyStatus_LCL & JOY_DOWN) @@ -160,7 +160,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) KeyboardReport->KeyCode[UsedKeyCodes++] = 0x08; // E - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) KeyboardReport->KeyCode[UsedKeyCodes++] = 0x09; // F @@ -190,12 +190,13 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK) LEDMask |= LEDS_LED1; - + if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK) LEDMask |= LEDS_LED3; if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK) LEDMask |= LEDS_LED4; - + LEDs_SetAllLEDs(LEDMask); } + diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.h b/Demos/Device/ClassDriver/Keyboard/Keyboard.h index fd7bf5198..b2b29a379 100644 --- a/Demos/Device/ClassDriver/Keyboard/Keyboard.h +++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -52,7 +52,7 @@ #include <LUFA/Drivers/Board/Buttons.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/HID.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -65,7 +65,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); @@ -81,9 +81,10 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); #endif + diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt index d4b414471..447b81f89 100644 --- a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt +++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Keyboard Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Keyboard Subclass</td> * </tr> @@ -50,8 +50,8 @@ * for implementing a USB Keyboard using the basic USB HID drivers in all modern * OSes (i.e. no special drivers required). It is boot protocol compatible, and thus * works under compatible BIOS as if it was a native keyboard (e.g. PS/2). - * - * On start-up the system will automatically enumerate and function as a keyboard + * + * On start-up the system will automatically enumerate and function as a keyboard * when the USB connection to a host is present. To use the keyboard example, * manipulate the joystick to send the letters a, b, c, d and e. See the USB HID * documentation for more information on sending keyboard event and key presses. Unlike @@ -59,7 +59,7 @@ * inside the same report to the host. * * \section SSec_Options Project Options - * + * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> @@ -70,3 +70,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile index a16fafb28..d31b068dd 100644 --- a/Demos/Device/ClassDriver/Keyboard/makefile +++ b/Demos/Device/ClassDriver/Keyboard/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c index 1f2411662..b18920fa6 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c +++ b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c @@ -1,21 +1,21 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -120,22 +120,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x204D, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -146,49 +146,49 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 2, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID1_KeyboardInterface = + + .HID1_KeyboardInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = HID_BOOTP_KeyboardBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID1_KeyboardHID = - { + .HID1_KeyboardHID = + { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, .HIDReportType = HID_DTYPE_Report, .HIDReportLength = sizeof(KeyboardReport) }, - - .HID1_ReportINEndpoint = + + .HID1_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -198,34 +198,34 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .PollingIntervalMS = 0x0A }, - .HID2_MouseInterface = + .HID2_MouseInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x01, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = HID_BOOTP_MouseBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID2_MouseHID = - { + .HID2_MouseHID = + { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, .HIDReportType = HID_DTYPE_Report, .HIDReportLength = sizeof(MouseReport) }, - - .HID2_ReportINEndpoint = + + .HID2_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -243,7 +243,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -254,7 +254,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -265,7 +265,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(28), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Mouse and Keyboard Demo" }; @@ -287,33 +287,33 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case HID_DTYPE_HID: + case HID_DTYPE_HID: if (!(wIndex)) { Address = &ConfigurationDescriptor.HID1_KeyboardHID; @@ -322,24 +322,25 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, else { Address = &ConfigurationDescriptor.HID2_MouseHID; - Size = sizeof(USB_HID_Descriptor_HID_t); + Size = sizeof(USB_HID_Descriptor_HID_t); } break; - case HID_DTYPE_Report: + case HID_DTYPE_Report: if (!(wIndex)) { Address = &KeyboardReport; Size = sizeof(KeyboardReport); } else - { + { Address = &MouseReport; Size = sizeof(MouseReport); } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h index b0d8f5a6b..83636e0fa 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h +++ b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h @@ -1,21 +1,21 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -57,7 +57,7 @@ USB_HID_Descriptor_HID_t HID2_MouseHID; USB_Descriptor_Endpoint_t HID2_ReportINEndpoint; } USB_Descriptor_Configuration_t; - + /* Macros: */ /** Endpoint number of the Keyboard HID reporting IN endpoint. */ #define KEYBOARD_IN_EPNUM 1 @@ -75,3 +75,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c index 96c430a22..45bb06b6e 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c +++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c @@ -1,21 +1,21 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -61,7 +61,7 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface = .PrevReportINBufferSize = sizeof(PrevKeyboardHIDReportBuffer), }, }; - + /** LUFA HID Class driver interface configuration and state information. This structure is * passed to all HID Class driver functions, so that multiple instances of the same class * within a device can be differentiated from one another. This is for the mouse HID @@ -78,7 +78,7 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface = .PrevReportINBuffer = PrevMouseHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), - }, + }, }; /** Main program entry point. This routine contains the overall program flow, including initial @@ -177,11 +177,11 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (HIDInterfaceInfo == &Keyboard_HID_Interface) { USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData; - + /* If first board button not being held down, no keyboard report */ if (!(ButtonStatus_LCL & BUTTONS_BUTTON1)) return 0; - + KeyboardReport->Modifier = HID_KEYBOARD_MODIFER_LEFTSHIFT; if (JoyStatus_LCL & JOY_UP) @@ -196,7 +196,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) KeyboardReport->KeyCode[0] = 0x08; // E - + *ReportSize = sizeof(USB_KeyboardReport_Data_t); return false; } @@ -207,7 +207,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn /* If first board button being held down, no mouse report */ if (ButtonStatus_LCL & BUTTONS_BUTTON1) return 0; - + if (JoyStatus_LCL & JOY_UP) MouseReport->Y = -1; else if (JoyStatus_LCL & JOY_DOWN) @@ -220,9 +220,9 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) MouseReport->Button |= (1 << 0); - + *ReportSize = sizeof(USB_MouseReport_Data_t); - return true; + return true; } } @@ -247,13 +247,13 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK) LEDMask |= LEDS_LED1; - + if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK) LEDMask |= LEDS_LED3; if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK) LEDMask |= LEDS_LED4; - + LEDs_SetAllLEDs(LEDMask); } -}
\ No newline at end of file +} diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h index 5c385fd42..186602f63 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h +++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h @@ -1,21 +1,21 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -60,7 +60,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); @@ -76,9 +76,10 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); - + #endif + diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt index f13087885..984493056 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt +++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Dual HID Keyboard and Mouse Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -44,7 +44,7 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Keyboard/Mouse demonstration application. This gives a simple reference * application for implementing a composite device containing both USB Keyboard @@ -52,13 +52,13 @@ * (i.e. no special drivers required). This example uses two separate HID * interfaces for each function. It is boot protocol compatible, and thus works under * compatible BIOS as if it was a native keyboard and mouse (e.g. PS/2). - * + * * On start-up the system will automatically enumerate and function * as a keyboard when the USB connection to a host is present and the HWB is not * pressed. When enabled, manipulate the joystick to send the letters * a, b, c, d and e. See the USB HID documentation for more information * on sending keyboard event and key presses. - * + * * When the HWB is pressed, the mouse mode is enabled. When enabled, move the * joystick to move the pointer, and push the joystick inwards to simulate a * left-button click. @@ -75,3 +75,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile index 8b2fb9d6e..8ef931962 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/makefile +++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/MIDI/Descriptors.c b/Demos/Device/ClassDriver/MIDI/Descriptors.c index 98e6ae508..d6092bbd4 100644 --- a/Demos/Device/ClassDriver/MIDI/Descriptors.c +++ b/Demos/Device/ClassDriver/MIDI/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,11 +30,11 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ - + #include "Descriptors.h" /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -45,22 +45,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2048, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -71,7 +71,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, @@ -80,122 +80,122 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .Audio_ControlInterface = + + .Audio_ControlInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 0, - + .Class = 0x01, .SubClass = 0x01, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_ControlInterface_SPC = + + .Audio_ControlInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_Header, - + .ACSpecification = VERSION_BCD(01.00), .TotalLength = sizeof(USB_Audio_Descriptor_Interface_AC_t), - + .InCollection = 1, .InterfaceNumber = 1, }, - .Audio_StreamInterface = + .Audio_StreamInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x01, .SubClass = 0x03, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_StreamInterface_SPC = + + .Audio_StreamInterface_SPC = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_AudioInterface_AS_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_General, .AudioSpecification = VERSION_BCD(01.00), - + .TotalLength = (sizeof(USB_Descriptor_Configuration_t) - offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC)) }, - .MIDI_In_Jack_Emb = + .MIDI_In_Jack_Emb = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal, - + .JackType = MIDI_JACKTYPE_Embedded, .JackID = 0x01, - + .JackStrIndex = NO_DESCRIPTOR }, - .MIDI_In_Jack_Ext = + .MIDI_In_Jack_Ext = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal, - + .JackType = MIDI_JACKTYPE_External, .JackID = 0x02, - + .JackStrIndex = NO_DESCRIPTOR }, - - .MIDI_Out_Jack_Emb = + + .MIDI_Out_Jack_Emb = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal, - + .JackType = MIDI_JACKTYPE_Embedded, .JackID = 0x03, .NumberOfPins = 1, .SourceJackID = {0x02}, .SourcePinID = {0x01}, - + .JackStrIndex = NO_DESCRIPTOR }, - .MIDI_Out_Jack_Ext = + .MIDI_Out_Jack_Ext = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal, - + .JackType = MIDI_JACKTYPE_External, .JackID = 0x04, .NumberOfPins = 1, .SourceJackID = {0x01}, .SourcePinID = {0x01}, - + .JackStrIndex = NO_DESCRIPTOR }, - .MIDI_In_Jack_Endpoint = + .MIDI_In_Jack_Endpoint = { - .Endpoint = + .Endpoint = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, @@ -204,12 +204,12 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointSize = MIDI_STREAM_EPSIZE, .PollingIntervalMS = 0 }, - + .Refresh = 0, .SyncEndpointNumber = 0 }, - - .MIDI_In_Jack_Endpoint_SPC = + + .MIDI_In_Jack_Endpoint_SPC = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint}, .Subtype = AUDIO_DSUBTYPE_CSEndpoint_General, @@ -218,9 +218,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .AssociatedJackID = {0x01} }, - .MIDI_Out_Jack_Endpoint = + .MIDI_Out_Jack_Endpoint = { - .Endpoint = + .Endpoint = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, @@ -229,12 +229,12 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointSize = MIDI_STREAM_EPSIZE, .PollingIntervalMS = 0 }, - + .Refresh = 0, .SyncEndpointNumber = 0 }, - - .MIDI_Out_Jack_Endpoint_SPC = + + .MIDI_Out_Jack_Endpoint_SPC = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint}, .Subtype = AUDIO_DSUBTYPE_CSEndpoint_General, @@ -251,7 +251,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -262,7 +262,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -273,7 +273,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(14), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA MIDI Demo" }; @@ -295,34 +295,35 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/MIDI/Descriptors.h b/Demos/Device/ClassDriver/MIDI/Descriptors.h index 52ba98f06..06020c8f9 100644 --- a/Demos/Device/ClassDriver/MIDI/Descriptors.h +++ b/Demos/Device/ClassDriver/MIDI/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -51,7 +51,7 @@ /** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */ #define MIDI_STREAM_EPSIZE 64 - + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which @@ -73,7 +73,7 @@ USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_Out_Jack_Endpoint; USB_MIDI_Descriptor_Jack_Endpoint_t MIDI_Out_Jack_Endpoint_SPC; } USB_Descriptor_Configuration_t; - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, @@ -81,3 +81,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.c b/Demos/Device/ClassDriver/MIDI/MIDI.c index bfeeaa38e..cae7277fd 100644 --- a/Demos/Device/ClassDriver/MIDI/MIDI.c +++ b/Demos/Device/ClassDriver/MIDI/MIDI.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -65,11 +65,11 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { CheckJoystickMovement(); - + MIDI_EventPacket_t ReceivedMIDIEvent; if (MIDI_Device_ReceiveEventPacket(&Keyboard_MIDI_Interface, &ReceivedMIDIEvent)) { @@ -78,7 +78,7 @@ int main(void) else LEDs_SetAllLEDs(LEDS_NO_LEDS); } - + MIDI_Device_USBTask(&Keyboard_MIDI_Interface); USB_USBTask(); } @@ -93,7 +93,7 @@ void SetupHardware(void) /* Disable clock division */ clock_prescale_set(clock_div_1); - + /* Hardware Initialization */ Joystick_Init(); LEDs_Init(); @@ -108,11 +108,11 @@ void CheckJoystickMovement(void) uint8_t MIDICommand = 0; uint8_t MIDIPitch; - + /* Get current joystick mask, XOR with previous to detect joystick changes */ uint8_t JoystickStatus = Joystick_GetStatus(); uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus); - + /* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */ uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1)); @@ -133,7 +133,7 @@ void CheckJoystickMovement(void) MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF); MIDIPitch = 0x3E; } - + if (JoystickChanges & JOY_DOWN) { MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF); @@ -145,19 +145,19 @@ void CheckJoystickMovement(void) MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF); MIDIPitch = 0x3B; } - + if (MIDICommand) { MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t) { .CableNumber = 0, .Command = (MIDICommand >> 4), - + .Data1 = MIDICommand | Channel, .Data2 = MIDIPitch, - .Data3 = MIDI_STANDARD_VELOCITY, + .Data3 = MIDI_STANDARD_VELOCITY, }; - + MIDI_Device_SendEventPacket(&Keyboard_MIDI_Interface, &MIDIEvent); MIDI_Device_Flush(&Keyboard_MIDI_Interface); } @@ -192,3 +192,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { MIDI_Device_ProcessControlRequest(&Keyboard_MIDI_Interface); } + diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.h b/Demos/Device/ClassDriver/MIDI/MIDI.h index 6fd304e7a..c97311654 100644 --- a/Demos/Device/ClassDriver/MIDI/MIDI.h +++ b/Demos/Device/ClassDriver/MIDI/MIDI.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for AudioOutput.c. */ - + #ifndef _AUDIO_OUTPUT_H_ #define _AUDIO_OUTPUT_H_ @@ -45,7 +45,7 @@ #include <string.h> #include "Descriptors.h" - + #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Board/Joystick.h> @@ -65,14 +65,15 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void CheckJoystickMovement(void); - + void EVENT_USB_Device_Connect(void); void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); - + #endif + diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.txt b/Demos/Device/ClassDriver/MIDI/MIDI.txt index e9522f2ed..0629832b2 100644 --- a/Demos/Device/ClassDriver/MIDI/MIDI.txt +++ b/Demos/Device/ClassDriver/MIDI/MIDI.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage MIDI Input Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Audio Class</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Standard Audio Device</td> * </tr> @@ -44,19 +44,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * MIDI demonstration application. This gives a simple reference * application for implementing the USB-MIDI class in USB devices. * It is built upon the USB Audio class. - * + * * Joystick movements are translated into note on/off messages and * are sent to the host PC as MIDI streams which can be read by any * MIDI program supporting MIDI IN devices. - * + * * If the HWB is not pressed, channel 1 (default piano) is used. If * the HWB is set, then channel 10 (default percussion) is selected. - * + * * This device implements MIDI-THRU mode, with the IN MIDI data being * generated by the device itself. OUT MIDI data is discarded. * @@ -72,3 +72,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile index 9e748ddb4..c60aff97d 100644 --- a/Demos/Device/ClassDriver/MIDI/makefile +++ b/Demos/Device/ClassDriver/MIDI/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/MassStorage/Descriptors.c b/Demos/Device/ClassDriver/MassStorage/Descriptors.c index b6e03a359..d06161049 100644 --- a/Demos/Device/ClassDriver/MassStorage/Descriptors.c +++ b/Demos/Device/ClassDriver/MassStorage/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -57,22 +57,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2045, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = USE_INTERNAL_SERIAL, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -83,38 +83,38 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED, - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .MS_Interface = + + .MS_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x08, .SubClass = 0x06, .Protocol = 0x50, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .MS_DataInEndpoint = + .MS_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -124,7 +124,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .PollingIntervalMS = 0x00 }, - .MS_DataOutEndpoint = + .MS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -142,7 +142,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -153,7 +153,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -164,7 +164,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(22), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Mass Storage Demo" }; @@ -186,34 +186,35 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/MassStorage/Descriptors.h b/Demos/Device/ClassDriver/MassStorage/Descriptors.h index 1b40df159..c816e2383 100644 --- a/Demos/Device/ClassDriver/MassStorage/Descriptors.h +++ b/Demos/Device/ClassDriver/MassStorage/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -44,15 +44,15 @@ /* Macros: */ /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + #define MASS_STORAGE_IN_EPNUM 3 /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + #define MASS_STORAGE_OUT_EPNUM 4 /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 - - /* Type Defines: */ + + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which * vary between devices, and which describe the device's usage to the host. @@ -64,7 +64,7 @@ USB_Descriptor_Endpoint_t MS_DataInEndpoint; USB_Descriptor_Endpoint_t MS_DataOutEndpoint; } USB_Descriptor_Configuration_t; - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, @@ -72,3 +72,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c b/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c index ce2ac8151..2c63f6098 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c +++ b/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -77,7 +77,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -86,7 +86,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn { /* Clear the current endpoint bank */ Endpoint_ClearOUT(); - + /* Wait until the host has sent another packet */ if (Endpoint_WaitUntilReady()) return; @@ -125,7 +125,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn /* Send the Dataflash buffer write command */ Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, 0); + Dataflash_SendAddressBytes(0, 0); } /* Write one 16-byte chunk of data to the Dataflash */ @@ -145,7 +145,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn Dataflash_SendByte(Endpoint_Read_Byte()); Dataflash_SendByte(Endpoint_Read_Byte()); Dataflash_SendByte(Endpoint_Read_Byte()); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; @@ -154,9 +154,9 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn /* Check if the current command is being aborted by the host */ if (MSInterfaceInfo->State.IsMassStoreReset) - return; + return; } - + /* Decrement the blocks remaining counter and reset the sub block counter */ TotalBlocks--; } @@ -201,15 +201,15 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - + /* Wait until endpoint is ready before continuing */ if (Endpoint_WaitUntilReady()) return; - + while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -218,12 +218,12 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf { /* Clear the endpoint bank to send its contents to the host */ Endpoint_ClearIN(); - + /* Wait until the endpoint is ready for more data */ if (Endpoint_WaitUntilReady()) return; } - + /* Check if end of Dataflash page reached */ if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) { @@ -233,7 +233,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); - + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, 0); @@ -241,7 +241,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - } + } /* Read one 16-byte chunk of data from the Dataflash */ Endpoint_Write_Byte(Dataflash_ReceiveByte()); @@ -260,10 +260,10 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf Endpoint_Write_Byte(Dataflash_ReceiveByte()); Endpoint_Write_Byte(Dataflash_ReceiveByte()); Endpoint_Write_Byte(Dataflash_ReceiveByte()); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; - + /* Increment the block 16 byte block counter */ BytesInBlockDiv16++; @@ -271,11 +271,11 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf if (MSInterfaceInfo->State.IsMassStoreReset) return; } - + /* Decrement the blocks remaining counter */ TotalBlocks--; } - + /* If the endpoint is full, send its contents to the host */ if (!(Endpoint_IsReadWriteAllowed())) Endpoint_ClearIN(); @@ -315,11 +315,11 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, /* Send the Dataflash buffer write command */ Dataflash_SendByte(DF_CMD_BUFF1WRITE); Dataflash_SendAddressBytes(0, CurrDFPageByte); - + while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -359,18 +359,18 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, Dataflash_SendByte(DF_CMD_BUFF1WRITE); Dataflash_SendAddressBytes(0, 0); } - + /* Write one 16-byte chunk of data to the Dataflash */ for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) Dataflash_SendByte(*(BufferPtr++)); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; + BytesInBlockDiv16++; } - + /* Decrement the blocks remaining counter and reset the sub block counter */ TotalBlocks--; } @@ -416,7 +416,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -429,7 +429,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); - + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, 0); @@ -437,19 +437,19 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - } + } /* Read one 16-byte chunk of data from the Dataflash */ for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) *(BufferPtr++) = Dataflash_ReceiveByte(); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; - + /* Increment the block 16 byte block counter */ BytesInBlockDiv16++; } - + /* Decrement the blocks remaining counter */ TotalBlocks--; } @@ -464,7 +464,7 @@ void DataflashManager_ResetDataflashProtections(void) /* Select first Dataflash chip, send the read status register command */ Dataflash_SelectChip(DATAFLASH_CHIP1); Dataflash_SendByte(DF_CMD_GETSTATUS); - + /* Check if sector protection is enabled */ if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) { @@ -476,12 +476,12 @@ void DataflashManager_ResetDataflashProtections(void) Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]); Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); } - + /* Select second Dataflash chip (if present on selected board), send read status register command */ #if (DATAFLASH_TOTALCHIPS == 2) Dataflash_SelectChip(DATAFLASH_CHIP2); Dataflash_SendByte(DF_CMD_GETSTATUS); - + /* Check if sector protection is enabled */ if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) { @@ -494,7 +494,7 @@ void DataflashManager_ResetDataflashProtections(void) Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); } #endif - + /* Deselect current Dataflash chip */ Dataflash_DeselectChip(); } @@ -528,6 +528,7 @@ bool DataflashManager_CheckDataflashOperation(void) if (ReturnByte != DF_MANUFACTURER_ATMEL) return false; #endif - + return true; } + diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h b/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h index a7652bcad..d3949f23e 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h +++ b/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,13 +32,13 @@ * * Header file for DataflashManager.c. */ - + #ifndef _DATAFLASH_MANAGER_H_ #define _DATAFLASH_MANAGER_H_ /* Includes: */ #include <avr/io.h> - + #include "MassStorage.h" #include "Descriptors.h" @@ -60,12 +60,12 @@ * storage media (Dataflash) using a different native block size. Do not change this value. */ #define VIRTUAL_MEMORY_BLOCK_SIZE 512 - + /** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not * change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size. */ #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) - + /* Function Prototypes: */ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const uint32_t BlockAddress, @@ -81,5 +81,6 @@ uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3); void DataflashManager_ResetDataflashProtections(void); bool DataflashManager_CheckDataflashOperation(void); - + #endif + diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c index fed57f7b9..8c31b2b80 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c +++ b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,29 +34,29 @@ * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information, * which wrap around standard SCSI device commands for controlling the actual storage medium. */ - + #define INCLUDE_FROM_SCSI_C #include "SCSI.h" /** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's * features and capabilities. */ -SCSI_Inquiry_Response_t InquiryData = +SCSI_Inquiry_Response_t InquiryData = { .DeviceType = DEVICE_TYPE_BLOCK, .PeripheralQualifier = 0, - + .Removable = true, - + .Version = 0, - + .ResponseDataFormat = 2, .NormACA = false, .TrmTsk = false, .AERC = false, .AdditionalLength = 0x1F, - + .SoftReset = false, .CmdQue = false, .Linked = false, @@ -64,7 +64,7 @@ SCSI_Inquiry_Response_t InquiryData = .WideBus16Bit = false, .WideBus32Bit = false, .RelAddr = false, - + .VendorID = "LUFA", .ProductID = "Dataflash Disk", .RevisionID = {'0','.','0','0'}, @@ -96,13 +96,13 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0]) { case SCSI_CMD_INQUIRY: - CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); + CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); break; case SCSI_CMD_REQUEST_SENSE: CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo); break; case SCSI_CMD_READ_CAPACITY_10: - CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); + CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); break; case SCSI_CMD_SEND_DIAGNOSTIC: CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo); @@ -134,7 +134,7 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD, SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, SCSI_ASENSEQ_NO_QUALIFIER); - + return true; } @@ -165,11 +165,11 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf return false; } - + Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NO_STREAM_CALLBACK); uint8_t PadBytes[AllocationLength - BytesTransferred]; - + /* Pad out remaining bytes with 0x00 */ Endpoint_Write_Stream_LE(&PadBytes, sizeof(PadBytes), NO_STREAM_CALLBACK); @@ -178,7 +178,7 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf /* Succeed the command and update the bytes transferred counter */ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; - + return true; } @@ -193,7 +193,7 @@ static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterf { uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4]; uint8_t BytesTransferred = (AllocationLength < sizeof(SenseData))? AllocationLength : sizeof(SenseData); - + uint8_t PadBytes[AllocationLength - BytesTransferred]; Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NO_STREAM_CALLBACK); @@ -221,10 +221,10 @@ static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInt Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NO_STREAM_CALLBACK); Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NO_STREAM_CALLBACK); Endpoint_ClearIN(); - + /* Succeed the command and update the bytes transferred counter */ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8; - + return true; } @@ -248,21 +248,21 @@ static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInte return false; } - + /* Check to see if all attached Dataflash ICs are functional */ if (!(DataflashManager_CheckDataflashOperation())) { /* Update SENSE key with a hardware error condition and return command fail */ SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR, SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, - SCSI_ASENSEQ_NO_QUALIFIER); - + SCSI_ASENSEQ_NO_QUALIFIER); + return false; } - + /* Succeed the command and update the bytes transferred counter */ MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; - + return true; } @@ -280,13 +280,13 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa { uint32_t BlockAddress; uint16_t TotalBlocks; - + /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */ TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]); - + /* Check if the block address is outside the maximum allowable value for the LUN */ if (BlockAddress >= LUN_MEDIA_BLOCKS) { @@ -302,7 +302,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa /* Adjust the given block address to the real media address based on the selected LUN */ BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS); #endif - + /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */ if (IsDataRead == DATA_READ) DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); @@ -311,6 +311,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa /* Update the bytes transferred counter and succeed the command */ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE); - + return true; } + diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h index bf3c13850..6c7071dcd 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h +++ b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for SCSI.c. */ - + #ifndef _SCSI_H_ #define _SCSI_H_ @@ -46,7 +46,7 @@ #include "MassStorage.h" #include "Descriptors.h" #include "DataflashManager.h" - + /* Macros: */ /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about @@ -68,13 +68,13 @@ /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */ #define DEVICE_TYPE_BLOCK 0x00 - + /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */ #define DEVICE_TYPE_CDROM 0x05 - + /* Function Prototypes: */ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - + #if defined(INCLUDE_FROM_SCSI_C) static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); @@ -83,5 +83,6 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const bool IsDataRead); #endif - + #endif + diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.c b/Demos/Device/ClassDriver/MassStorage/MassStorage.c index 94f9f8415..993d5a5f9 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.c +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -130,10 +130,11 @@ void EVENT_USB_Device_UnhandledControlRequest(void) bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) { bool CommandSuccess; - + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo); LEDs_SetAllLEDs(LEDMASK_USB_READY); - + return CommandSuccess; } + diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.h b/Demos/Device/ClassDriver/MassStorage/MassStorage.h index a9abd0edb..3e829e7b5 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.h +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -68,13 +68,13 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - + /** Total number of logical drives within the device - must be non-zero. */ #define TOTAL_LUNS 1 - + /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) - + /* Function Prototypes: */ void SetupHardware(void); @@ -86,3 +86,4 @@ bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); #endif + diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt index 934cb50aa..2b4c68235 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Mass Storage Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Mass Storage Device</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Bulk-Only Transport</td> * </tr> @@ -45,23 +45,23 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Dual LUN Mass Storage demonstration application. This gives a simple * reference application for implementing a multiple LUN USB Mass Storage * device using the basic USB UFI drivers in all modern OSes (i.e. no * special drivers required). - * + * * On start-up the system will automatically enumerate and function as an * external mass storage device with two LUNs (separate disks) which may * be formatted and used in the same manner as commercial USB Mass Storage * devices. - * + * * You will need to format the mass storage drives upon first run of this * demonstration - as the device acts only as a data block transport between * the host and the storage media, it does not matter what file system is used, * as the data interpretation is performed by the host and not the USB device. - * + * * This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS * value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to * 255), with each LUN being allocated an equal portion of the available @@ -90,3 +90,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile index 8941b80db..54b4b7f17 100644 --- a/Demos/Device/ClassDriver/MassStorage/makefile +++ b/Demos/Device/ClassDriver/MassStorage/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -138,7 +138,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -151,7 +151,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -265,7 +265,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -278,7 +278,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -290,7 +290,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -302,7 +302,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -325,7 +325,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -359,7 +359,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -393,7 +393,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -422,7 +422,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -441,10 +441,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -509,11 +509,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -540,9 +540,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -640,14 +640,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -669,7 +669,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -713,3 +713,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c index 7be7bed92..0a42af7be 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -10,13 +10,13 @@ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -31,9 +31,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -100,22 +100,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2061, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = USE_INTERNAL_SERIAL, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -126,38 +126,38 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 2, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED, - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .MS_Interface = + + .MS_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x08, .SubClass = 0x06, .Protocol = 0x50, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .MS_DataInEndpoint = + .MS_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -167,7 +167,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .PollingIntervalMS = 0x00 }, - .MS_DataOutEndpoint = + .MS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -177,34 +177,34 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .PollingIntervalMS = 0x00 }, - .HID_KeyboardInterface = + .HID_KeyboardInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = HID_BOOTP_KeyboardBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_KeyboardHID = - { + .HID_KeyboardHID = + { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, .HIDReportType = HID_DTYPE_Report, .HIDReportLength = sizeof(KeyboardReport) }, - - .HID_ReportINEndpoint = + + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -222,7 +222,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -233,7 +233,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -244,7 +244,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(35), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Mass Storage and Keyboard Demo" }; @@ -266,31 +266,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; case HID_DTYPE_HID: Address = &ConfigurationDescriptor.HID_KeyboardHID; @@ -301,7 +301,8 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Size = sizeof(KeyboardReport); break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h index 678c8ec85..dd861e6b8 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -10,13 +10,13 @@ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -47,20 +47,20 @@ /* Macros: */ /** Endpoint number of the Keyboard HID reporting IN endpoint. */ #define KEYBOARD_EPNUM 1 - - /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */ + + /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */ #define KEYBOARD_EPSIZE 8 /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + #define MASS_STORAGE_IN_EPNUM 3 /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + #define MASS_STORAGE_OUT_EPNUM 4 /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 - - /* Type Defines: */ + + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which * vary between devices, and which describe the device's usage to the host. @@ -75,7 +75,7 @@ USB_HID_Descriptor_HID_t HID_KeyboardHID; USB_Descriptor_Endpoint_t HID_ReportINEndpoint; } USB_Descriptor_Configuration_t; - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, @@ -83,3 +83,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c index ce2ac8151..2c63f6098 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -77,7 +77,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -86,7 +86,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn { /* Clear the current endpoint bank */ Endpoint_ClearOUT(); - + /* Wait until the host has sent another packet */ if (Endpoint_WaitUntilReady()) return; @@ -125,7 +125,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn /* Send the Dataflash buffer write command */ Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, 0); + Dataflash_SendAddressBytes(0, 0); } /* Write one 16-byte chunk of data to the Dataflash */ @@ -145,7 +145,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn Dataflash_SendByte(Endpoint_Read_Byte()); Dataflash_SendByte(Endpoint_Read_Byte()); Dataflash_SendByte(Endpoint_Read_Byte()); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; @@ -154,9 +154,9 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn /* Check if the current command is being aborted by the host */ if (MSInterfaceInfo->State.IsMassStoreReset) - return; + return; } - + /* Decrement the blocks remaining counter and reset the sub block counter */ TotalBlocks--; } @@ -201,15 +201,15 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - + /* Wait until endpoint is ready before continuing */ if (Endpoint_WaitUntilReady()) return; - + while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -218,12 +218,12 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf { /* Clear the endpoint bank to send its contents to the host */ Endpoint_ClearIN(); - + /* Wait until the endpoint is ready for more data */ if (Endpoint_WaitUntilReady()) return; } - + /* Check if end of Dataflash page reached */ if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) { @@ -233,7 +233,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); - + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, 0); @@ -241,7 +241,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - } + } /* Read one 16-byte chunk of data from the Dataflash */ Endpoint_Write_Byte(Dataflash_ReceiveByte()); @@ -260,10 +260,10 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf Endpoint_Write_Byte(Dataflash_ReceiveByte()); Endpoint_Write_Byte(Dataflash_ReceiveByte()); Endpoint_Write_Byte(Dataflash_ReceiveByte()); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; - + /* Increment the block 16 byte block counter */ BytesInBlockDiv16++; @@ -271,11 +271,11 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf if (MSInterfaceInfo->State.IsMassStoreReset) return; } - + /* Decrement the blocks remaining counter */ TotalBlocks--; } - + /* If the endpoint is full, send its contents to the host */ if (!(Endpoint_IsReadWriteAllowed())) Endpoint_ClearIN(); @@ -315,11 +315,11 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, /* Send the Dataflash buffer write command */ Dataflash_SendByte(DF_CMD_BUFF1WRITE); Dataflash_SendAddressBytes(0, CurrDFPageByte); - + while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -359,18 +359,18 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, Dataflash_SendByte(DF_CMD_BUFF1WRITE); Dataflash_SendAddressBytes(0, 0); } - + /* Write one 16-byte chunk of data to the Dataflash */ for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) Dataflash_SendByte(*(BufferPtr++)); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; + BytesInBlockDiv16++; } - + /* Decrement the blocks remaining counter and reset the sub block counter */ TotalBlocks--; } @@ -416,7 +416,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -429,7 +429,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); - + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, 0); @@ -437,19 +437,19 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - } + } /* Read one 16-byte chunk of data from the Dataflash */ for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) *(BufferPtr++) = Dataflash_ReceiveByte(); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; - + /* Increment the block 16 byte block counter */ BytesInBlockDiv16++; } - + /* Decrement the blocks remaining counter */ TotalBlocks--; } @@ -464,7 +464,7 @@ void DataflashManager_ResetDataflashProtections(void) /* Select first Dataflash chip, send the read status register command */ Dataflash_SelectChip(DATAFLASH_CHIP1); Dataflash_SendByte(DF_CMD_GETSTATUS); - + /* Check if sector protection is enabled */ if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) { @@ -476,12 +476,12 @@ void DataflashManager_ResetDataflashProtections(void) Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]); Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); } - + /* Select second Dataflash chip (if present on selected board), send read status register command */ #if (DATAFLASH_TOTALCHIPS == 2) Dataflash_SelectChip(DATAFLASH_CHIP2); Dataflash_SendByte(DF_CMD_GETSTATUS); - + /* Check if sector protection is enabled */ if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) { @@ -494,7 +494,7 @@ void DataflashManager_ResetDataflashProtections(void) Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); } #endif - + /* Deselect current Dataflash chip */ Dataflash_DeselectChip(); } @@ -528,6 +528,7 @@ bool DataflashManager_CheckDataflashOperation(void) if (ReturnByte != DF_MANUFACTURER_ATMEL) return false; #endif - + return true; } + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h index d5a9fd5b0..6ccc5dfe1 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,13 +32,13 @@ * * Header file for DataflashManager.c. */ - + #ifndef _DATAFLASH_MANAGER_H_ #define _DATAFLASH_MANAGER_H_ /* Includes: */ #include <avr/io.h> - + #include "MassStorageKeyboard.h" #include "Descriptors.h" @@ -59,16 +59,16 @@ * storage media (Dataflash) using a different native block size. */ #define VIRTUAL_MEMORY_BLOCK_SIZE 512 - + /** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. */ #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) - + /** Total number of logical drives within the device - must be non-zero. */ #define TOTAL_LUNS 1 - + /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) - + /* Function Prototypes: */ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const uint32_t BlockAddress, @@ -84,5 +84,6 @@ uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3); void DataflashManager_ResetDataflashProtections(void); bool DataflashManager_CheckDataflashOperation(void); - + #endif + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c index fed57f7b9..8c31b2b80 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,29 +34,29 @@ * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information, * which wrap around standard SCSI device commands for controlling the actual storage medium. */ - + #define INCLUDE_FROM_SCSI_C #include "SCSI.h" /** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's * features and capabilities. */ -SCSI_Inquiry_Response_t InquiryData = +SCSI_Inquiry_Response_t InquiryData = { .DeviceType = DEVICE_TYPE_BLOCK, .PeripheralQualifier = 0, - + .Removable = true, - + .Version = 0, - + .ResponseDataFormat = 2, .NormACA = false, .TrmTsk = false, .AERC = false, .AdditionalLength = 0x1F, - + .SoftReset = false, .CmdQue = false, .Linked = false, @@ -64,7 +64,7 @@ SCSI_Inquiry_Response_t InquiryData = .WideBus16Bit = false, .WideBus32Bit = false, .RelAddr = false, - + .VendorID = "LUFA", .ProductID = "Dataflash Disk", .RevisionID = {'0','.','0','0'}, @@ -96,13 +96,13 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0]) { case SCSI_CMD_INQUIRY: - CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); + CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); break; case SCSI_CMD_REQUEST_SENSE: CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo); break; case SCSI_CMD_READ_CAPACITY_10: - CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); + CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); break; case SCSI_CMD_SEND_DIAGNOSTIC: CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo); @@ -134,7 +134,7 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD, SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, SCSI_ASENSEQ_NO_QUALIFIER); - + return true; } @@ -165,11 +165,11 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf return false; } - + Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NO_STREAM_CALLBACK); uint8_t PadBytes[AllocationLength - BytesTransferred]; - + /* Pad out remaining bytes with 0x00 */ Endpoint_Write_Stream_LE(&PadBytes, sizeof(PadBytes), NO_STREAM_CALLBACK); @@ -178,7 +178,7 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf /* Succeed the command and update the bytes transferred counter */ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; - + return true; } @@ -193,7 +193,7 @@ static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterf { uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4]; uint8_t BytesTransferred = (AllocationLength < sizeof(SenseData))? AllocationLength : sizeof(SenseData); - + uint8_t PadBytes[AllocationLength - BytesTransferred]; Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NO_STREAM_CALLBACK); @@ -221,10 +221,10 @@ static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInt Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NO_STREAM_CALLBACK); Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NO_STREAM_CALLBACK); Endpoint_ClearIN(); - + /* Succeed the command and update the bytes transferred counter */ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8; - + return true; } @@ -248,21 +248,21 @@ static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInte return false; } - + /* Check to see if all attached Dataflash ICs are functional */ if (!(DataflashManager_CheckDataflashOperation())) { /* Update SENSE key with a hardware error condition and return command fail */ SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR, SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, - SCSI_ASENSEQ_NO_QUALIFIER); - + SCSI_ASENSEQ_NO_QUALIFIER); + return false; } - + /* Succeed the command and update the bytes transferred counter */ MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; - + return true; } @@ -280,13 +280,13 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa { uint32_t BlockAddress; uint16_t TotalBlocks; - + /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */ TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]); - + /* Check if the block address is outside the maximum allowable value for the LUN */ if (BlockAddress >= LUN_MEDIA_BLOCKS) { @@ -302,7 +302,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa /* Adjust the given block address to the real media address based on the selected LUN */ BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS); #endif - + /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */ if (IsDataRead == DATA_READ) DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); @@ -311,6 +311,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa /* Update the bytes transferred counter and succeed the command */ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE); - + return true; } + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h index f39134d35..b2dd70feb 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for SCSI.c. */ - + #ifndef _SCSI_H_ #define _SCSI_H_ @@ -46,7 +46,7 @@ #include "MassStorageKeyboard.h" #include "Descriptors.h" #include "DataflashManager.h" - + /* Macros: */ /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about @@ -68,13 +68,13 @@ /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */ #define DEVICE_TYPE_BLOCK 0x00 - + /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */ #define DEVICE_TYPE_CDROM 0x05 - + /* Function Prototypes: */ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - + #if defined(INCLUDE_FROM_SCSI_C) static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); @@ -83,5 +83,6 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const bool IsDataRead); #endif - + #endif + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c index e5dbfb675..e71bffa7a 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -10,13 +10,13 @@ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -36,7 +36,7 @@ */ #include "MassStorageKeyboard.h" - + /** LUFA Mass Storage Class driver interface configuration and state information. This structure is * passed to all Mass Storage Class driver functions, so that multiple instances of the same class * within a device can be differentiated from one another. @@ -160,11 +160,11 @@ void EVENT_USB_Device_UnhandledControlRequest(void) bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) { bool CommandSuccess; - + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo); LEDs_SetAllLEDs(LEDMASK_USB_READY); - + return CommandSuccess; } @@ -191,7 +191,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn uint16_t* const ReportSize) { USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData; - + uint8_t JoyStatus_LCL = Joystick_GetStatus(); uint8_t ButtonStatus_LCL = Buttons_GetStatus(); @@ -209,10 +209,10 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) KeyboardReport->KeyCode[0] = 0x08; // E - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) KeyboardReport->KeyCode[0] = 0x09; // F - + *ReportSize = sizeof(USB_KeyboardReport_Data_t); return false; } @@ -236,13 +236,13 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK) LEDMask |= LEDS_LED1; - + if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK) LEDMask |= LEDS_LED3; if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK) LEDMask |= LEDS_LED4; - + LEDs_SetAllLEDs(LEDMask); } diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h index 482969b93..43e04d0b1 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -10,13 +10,13 @@ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -58,7 +58,7 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/MassStorage.h> #include <LUFA/Drivers/USB/Class/Device/HID.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -74,7 +74,7 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - + /* Function Prototypes: */ void SetupHardware(void); @@ -92,9 +92,10 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); #endif + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt index 2a579c8c7..f93a5ff49 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Combined Mass Storage and Keyboard Device Demo * * \section SSec_Compat Demo Compatibility: @@ -29,7 +29,7 @@ * <td>Mass Storage Device \n * Human Interface Device</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclasses:</b></td> * <td>Bulk-Only Transport \n * Keyboard Subclass</td> @@ -49,24 +49,24 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Combined Mass Storage and Keyboard demonstration application. This gives a * simple reference application for implementing a dual class USB Mass Storage * and USB HID Keyboard device using the basic USB UFI and HID drivers in all * modern OSes (i.e. no special drivers required). - * + * * On start-up the system will automatically enumerate and function as an * external mass storage device (which may be formatted and used in the same * manner as commercial USB Mass Storage devices) and a USB keyboard. - * + * * You will need to format the mass storage drive upon first run of this * demonstration - as the device acts only as a data block transport between * the host and the storage media, it does not matter what file system is used, * as the data interpretation is performed by the host and not the USB device. * * Keys on the USB keyboard can be pressed by moving the board's Joystick. - * + * * The USB control endpoint is managed entirely by the library using endpoint * interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for * the host to reset the Mass Storage device state during long transfers without @@ -90,3 +90,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile index 09c480620..bdc0a9b64 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -138,7 +138,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -151,7 +151,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -265,7 +265,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -278,7 +278,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -290,7 +290,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -302,7 +302,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -325,7 +325,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -359,7 +359,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -393,7 +393,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -422,7 +422,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -441,10 +441,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -509,11 +509,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -540,9 +540,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -640,14 +640,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -669,7 +669,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -713,3 +713,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/Mouse/Descriptors.c b/Demos/Device/ClassDriver/Mouse/Descriptors.c index 02066ba93..866ba272f 100644 --- a/Demos/Device/ClassDriver/Mouse/Descriptors.c +++ b/Demos/Device/ClassDriver/Mouse/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -81,22 +81,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2041, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -107,38 +107,38 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID_Interface = + + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = HID_BOOTP_MouseBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_MouseHID = + .HID_MouseHID = { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, @@ -149,7 +149,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .HIDReportLength = sizeof(MouseReport) }, - .HID_ReportINEndpoint = + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -167,7 +167,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -178,7 +178,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -189,7 +189,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(15), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Mouse Demo" }; @@ -235,19 +235,19 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case HID_DTYPE_HID: + case HID_DTYPE_HID: Address = &ConfigurationDescriptor.HID_MouseHID; Size = sizeof(USB_HID_Descriptor_HID_t); break; - case HID_DTYPE_Report: + case HID_DTYPE_Report: Address = &MouseReport; Size = sizeof(MouseReport); break; } - - *DescriptorAddress = Address; + + *DescriptorAddress = Address; return Size; } diff --git a/Demos/Device/ClassDriver/Mouse/Descriptors.h b/Demos/Device/ClassDriver/Mouse/Descriptors.h index f482a6946..243c88d35 100644 --- a/Demos/Device/ClassDriver/Mouse/Descriptors.h +++ b/Demos/Device/ClassDriver/Mouse/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -54,11 +54,11 @@ USB_HID_Descriptor_HID_t HID_MouseHID; USB_Descriptor_Endpoint_t HID_ReportINEndpoint; } USB_Descriptor_Configuration_t; - + /* Macros: */ /** Endpoint number of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPNUM 1 - + /** Size in bytes of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPSIZE 8 @@ -69,3 +69,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.c b/Demos/Device/ClassDriver/Mouse/Mouse.c index aabd96138..ac6a91259 100644 --- a/Demos/Device/ClassDriver/Mouse/Mouse.c +++ b/Demos/Device/ClassDriver/Mouse/Mouse.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -62,9 +62,9 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface = * setup of all components and the main program loop. */ int main(void) -{ +{ SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); @@ -145,7 +145,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn uint16_t* const ReportSize) { USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData; - + uint8_t JoyStatus_LCL = Joystick_GetStatus(); uint8_t ButtonStatus_LCL = Buttons_GetStatus(); @@ -161,10 +161,10 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) MouseReport->Button |= (1 << 0); - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) MouseReport->Button |= (1 << 1); - + *ReportSize = sizeof(USB_MouseReport_Data_t); return true; } @@ -185,3 +185,4 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI { // Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports } + diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.h b/Demos/Device/ClassDriver/Mouse/Mouse.h index 48b129100..602783718 100644 --- a/Demos/Device/ClassDriver/Mouse/Mouse.h +++ b/Demos/Device/ClassDriver/Mouse/Mouse.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -44,7 +44,7 @@ #include <avr/interrupt.h> #include <stdbool.h> #include <string.h> - + #include "Descriptors.h" #include <LUFA/Version.h> @@ -53,7 +53,7 @@ #include <LUFA/Drivers/Board/Buttons.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/HID.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -66,7 +66,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); @@ -82,9 +82,10 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); #endif + diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.txt b/Demos/Device/ClassDriver/Mouse/Mouse.txt index 36f566f57..8f299283a 100644 --- a/Demos/Device/ClassDriver/Mouse/Mouse.txt +++ b/Demos/Device/ClassDriver/Mouse/Mouse.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Mouse Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Mouse Subclass</td> * </tr> @@ -44,14 +44,14 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Mouse demonstration application. This gives a simple reference * application for implementing a USB Mouse using the basic USB HID * drivers in all modern OSes (i.e. no special drivers required). It is * boot protocol compatible, and thus works under compatible BIOS as if * it was a native mouse (e.g. PS/2). - * + * * On start-up the system will automatically enumerate and function * as a mouse when the USB connection to a host is present. To use * the mouse, move the joystick to move the pointer, and push the @@ -70,3 +70,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile index 9fab31078..76e6d7dfc 100644 --- a/Demos/Device/ClassDriver/Mouse/makefile +++ b/Demos/Device/ClassDriver/Mouse/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c index 2eaa1eb5b..33f1dfe93 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,11 +30,11 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ - + #include "Descriptors.h" /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -45,22 +45,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x02, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x204C, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -71,102 +71,102 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 2, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .CDC_CCI_Interface = + + .CDC_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0xFF, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_Functional_Header = + .CDC_Functional_Header = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Header, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC_Functional_ACM = + .CDC_Functional_ACM = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_ACM, - + .Capabilities = 0x00, }, - - .CDC_Functional_Union = + + .CDC_Functional_Union = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Union, - + .MasterInterfaceNumber = 0, .SlaveInterfaceNumber = 1, }, - .CDC_NotificationEndpoint = + .CDC_NotificationEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0x02 }, - .CDC_DCI_Interface = + .CDC_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .RNDIS_DataOutEndpoint = + .RNDIS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .RNDIS_DataInEndpoint = + + .RNDIS_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, @@ -181,7 +181,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -192,7 +192,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -203,7 +203,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(19), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA RNDIS CDC Demo" }; @@ -229,7 +229,7 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; @@ -249,10 +249,11 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h index 26bd57127..7f67bc09b 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,7 +39,7 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/RNDIS.h> - + #include <avr/pgmspace.h> /* Macros: */ @@ -47,10 +47,10 @@ #define CDC_NOTIFICATION_EPNUM 3 /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 1 + #define CDC_TX_EPNUM 1 /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 2 + #define CDC_RX_EPNUM 2 /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 @@ -83,3 +83,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c index 18da19cdb..fe6c5bef2 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * conversion of physical MAC addresses to protocol IP addresses between the host and the * device. */ - + #include "ARP.h" /** Processes an ARP packet inside an Ethernet frame, and writes the appropriate response @@ -59,7 +59,7 @@ int16_t ARP_ProcessARPPacket(void* InDataStart, (SwapEndian_16(ARPHeaderIN->Operation) == ARP_OPERATION_REQUEST)) { /* If the ARP packet is requesting the MAC or IP of the virtual webserver, return the response */ - if (IP_COMPARE(&ARPHeaderIN->TPA, &ServerIPAddress) || + if (IP_COMPARE(&ARPHeaderIN->TPA, &ServerIPAddress) || MAC_COMPARE(&ARPHeaderIN->THA, &ServerMACAddress)) { /* Fill out the ARP response header */ @@ -81,6 +81,7 @@ int16_t ARP_ProcessARPPacket(void* InDataStart, return sizeof(ARP_Header_t); } } - + return NO_RESPONSE; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h index 8de76f3b6..d97761539 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,18 +32,18 @@ * * Header file for ARP.c. */ - + #ifndef _ARP_H_ #define _ARP_H_ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - + /* Macros: */ /** ARP header operation constant, indicating a request from a host for an address translation. */ #define ARP_OPERATION_REQUEST 1 @@ -57,19 +57,20 @@ { uint16_t HardwareType; /**< Hardware type constant, indicating the hardware used */ uint16_t ProtocolType; /**< Protocol being resolved, usually ETHERTYPE_IPV4 */ - + uint8_t HLEN; /**< Length in bytes of the source/destination hardware addresses */ uint8_t PLEN; /**< Length in bytes of the source/destination protocol addresses */ uint16_t Operation; /**< Type of operation, either ARP_OPERATION_REQUEST or ARP_OPERATION_REPLY */ - + MAC_Address_t SHA; /**< Sender's hardware address */ IP_Address_t SPA; /**< Sender's protocol address */ MAC_Address_t THA; /**< Target's hardware address */ IP_Address_t TPA; /**< Target's protocol address */ } ARP_Header_t; - + /* Function Prototypes: */ int16_t ARP_ProcessARPPacket(void* InDataStart, void* OutDataStart); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c index f694f2c81..18ad6a5e9 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * handles the automatic IP negotiation to the host, so that the host will use the provided * IP address given to it by the device. */ - + #include "DHCP.h" /** Processes a DHCP packet inside an Ethernet frame, and writes the appropriate response @@ -53,7 +53,7 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, IP_Header_t* IPHeaderIN = (IP_Header_t*)IPHeaderInStart; DHCP_Header_t* DHCPHeaderIN = (DHCP_Header_t*)DHCPHeaderInStart; DHCP_Header_t* DHCPHeaderOUT = (DHCP_Header_t*)DHCPHeaderOutStart; - + uint8_t* DHCPOptionsINStart = (uint8_t*)(DHCPHeaderInStart + sizeof(DHCP_Header_t)); uint8_t* DHCPOptionsOUTStart = (uint8_t*)(DHCPHeaderOutStart + sizeof(DHCP_Header_t)); @@ -73,7 +73,7 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, DHCPHeaderOUT->YourIP = ClientIPAddress; memmove(&DHCPHeaderOUT->ClientHardwareAddress, &DHCPHeaderIN->ClientHardwareAddress, sizeof(MAC_Address_t)); DHCPHeaderOUT->Cookie = SwapEndian_32(DHCP_MAGIC_COOKIE); - + /* Alter the incoming IP packet header so that the corrected IP source and destinations are used - this means that when the response IP header is generated, it will use the corrected addresses and not the null/broatcast addresses */ IPHeaderIN->SourceAddress = ClientIPAddress; @@ -81,7 +81,7 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, /* Process the incoming DHCP packet options */ while (DHCPOptionsINStart[0] != DHCP_OPTION_END) - { + { /* Find the Message Type DHCP option, to determine the type of DHCP packet */ if (DHCPOptionsINStart[0] == DHCP_OPTION_MESSAGETYPE) { @@ -107,14 +107,15 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, DHCPOptionsOUTStart += sizeof(IP_Address_t); *(DHCPOptionsOUTStart++) = DHCP_OPTION_END; - + return (sizeof(DHCP_Header_t) + 12 + sizeof(IP_Address_t)); } } - + /* Go to the next DHCP option - skip one byte if option is a padding byte, else skip the complete option's size */ DHCPOptionsINStart += ((DHCPOptionsINStart[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptionsINStart[1] + 2)); } - + return NO_RESPONSE; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h index 3bfdb29be..a4dc00dbb 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,14 +32,14 @@ * * Header file for DHCP.c. */ - + #ifndef _DHCP_H_ #define _DHCP_H_ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" @@ -50,13 +50,13 @@ /** DHCP operation constant, indicating a reply from a DHCP server to a host. */ #define DHCP_OP_BOOTREPLY 0x02 - + /** Hardware type constant, indicating Ethernet as a carrier. */ #define DHCP_HTYPE_ETHERNET 0x01 - + /** Magic boot protocol "cookie", inserted into all BOOTP packets (BOOTP is the carrier of DHCP). */ #define DHCP_MAGIC_COOKIE 0x63825363 - + /** DHCP option list entry header, indicating that a subnet mask will follow. */ #define DHCP_OPTION_SUBNETMASK 1 @@ -71,7 +71,7 @@ /** DHCP option list entry header, indicating the end of option data. */ #define DHCP_OPTION_END 255 - + /** Message type constant, used in the DHCP option data field, requesting that a DHCP server offer an IP address. */ #define DHCP_MESSAGETYPE_DISCOVER 1 @@ -106,16 +106,16 @@ uint16_t ElapsedSeconds; /**< Elapsed seconds since the request was made */ uint16_t Flags; /**< BOOTP packet flags */ - + IP_Address_t ClientIP; /**< Client IP address, if already leased an IP */ IP_Address_t YourIP; /**< Client IP address */ IP_Address_t NextServerIP; /**< Legacy BOOTP protocol field, unused for DHCP */ IP_Address_t RelayAgentIP; /**< Legacy BOOTP protocol field, unused for DHCP */ - + uint8_t ClientHardwareAddress[16]; /**< Hardware (MAC) address of the client making a request to the DHCP server */ uint8_t ServerHostnameString[64]; /**< Legacy BOOTP protocol field, unused for DHCP */ uint8_t BootFileName[128]; /**< Legacy BOOTP protocol field, unused for DHCP */ - + uint32_t Cookie; /**< Magic BOOTP protocol cookie to indicate a valid packet */ } DHCP_Header_t; @@ -125,3 +125,4 @@ void* DHCPHeaderOutStart); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c index 899b81f7e..687efe0c1 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * frames sent and received, deferring the processing of sub-packet protocols to the appropriate * protocol handlers, such as DHCP or ARP. */ - + #include "Ethernet.h" /** Constant for convenience when checking against or setting a MAC address to the virtual server MAC address. */ @@ -64,9 +64,9 @@ void Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN, /* Cast the incoming Ethernet frame to the Ethernet header type */ Ethernet_Frame_Header_t* FrameINHeader = (Ethernet_Frame_Header_t*)&FrameIN->FrameData; Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT->FrameData; - + int16_t RetSize = NO_RESPONSE; - + /* Ensure frame is addressed to either all (broadcast) or the virtual webserver, and is a type II frame */ if ((MAC_COMPARE(&FrameINHeader->Destination, &ServerMACAddress) || MAC_COMPARE(&FrameINHeader->Destination, &BroadcastMACAddress)) && @@ -78,14 +78,14 @@ void Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN, case ETHERTYPE_ARP: RetSize = ARP_ProcessARPPacket(&FrameIN->FrameData[sizeof(Ethernet_Frame_Header_t)], &FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t)]); - break; + break; case ETHERTYPE_IPV4: RetSize = IP_ProcessIPPacket(FrameIN, &FrameIN->FrameData[sizeof(Ethernet_Frame_Header_t)], &FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t)]); break; } - + /* Protocol processing routine has filled a response, complete the ethernet frame header */ if (RetSize > 0) { @@ -93,7 +93,7 @@ void Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN, FrameOUTHeader->Source = ServerMACAddress; FrameOUTHeader->Destination = FrameINHeader->Source; FrameOUTHeader->EtherType = FrameINHeader->EtherType; - + /* Set the response length in the buffer and indicate that a response is ready to be sent */ FrameOUT->FrameLength = (sizeof(Ethernet_Frame_Header_t) + RetSize); FrameOUT->FrameInBuffer = true; @@ -124,9 +124,10 @@ uint16_t Ethernet_Checksum16(void* Data, for (uint16_t CurrWord = 0; CurrWord < (Bytes >> 1); CurrWord++) Checksum += Words[CurrWord]; - + while (Checksum & 0xFFFF0000) Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16)); - + return ~Checksum; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h index 233f48d1b..cd2cd8b4d 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,14 +32,14 @@ * * Header file for Ethernet.c. */ - + #ifndef _ETHERNET_H_ #define _ETHERNET_H_ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include <LUFA/Drivers/USB/Class/RNDIS.h> #include "EthernetProtocols.h" @@ -50,31 +50,31 @@ #include "DHCP.h" #include "ARP.h" #include "IP.h" - + /* Macros: */ /** Physical MAC address of the USB RNDIS network adapter. */ #define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00} /** Physical MAC address of the virtual server on the network. */ - #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01} + #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01} /** Physical MAC address of the network broadcast address. */ #define BROADCAST_MAC_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} - + /** Performs a comparison between two MAC addresses, indicating if they are identical. - * + * * \param[in] MAC1 First MAC address * \param[in] MAC2 Second MAC address * * \return True if the addresses match, false otherwise */ #define MAC_COMPARE(MAC1, MAC2) (memcmp(MAC1, MAC2, sizeof(MAC_Address_t)) == 0) - + /** Minimum size of an Ethernet packet in bytes, to conform to the Ethernet V2 packet standard. */ #define ETHERNET_VER2_MINSIZE 0x0600 /** Return value for all sub protocol handling routines, indicating that no response packet has been generated. */ - #define NO_RESPONSE 0 + #define NO_RESPONSE 0 /** Return value for all sub protocol handling routines, indicating that the packet has not yet been handled. */ #define NO_PROCESS -1 @@ -87,18 +87,19 @@ MAC_Address_t Source; /**< Physics MAC address of the packet source */ uint16_t EtherType; /**< Ethernet packet sub-protocol type, for Ethernet V2 packets */ } Ethernet_Frame_Header_t; - + /* External Variables: */ extern const MAC_Address_t ServerMACAddress; extern const IP_Address_t ServerIPAddress; extern const MAC_Address_t BroadcastMACAddress; extern const IP_Address_t BroadcastIPAddress; extern const IP_Address_t ClientIPAddress; - + /* Function Prototypes: */ void Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN, Ethernet_Frame_Info_t* const FrameOUT); uint16_t Ethernet_Checksum16(void* Data, uint16_t Bytes); - + #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h index d5c93c695..2b0a71d01 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -63,7 +63,7 @@ #define ETHERTYPE_FIBRECHANNEL 0x8906 #define ETHERTYPE_QINQ 0x9100 #define ETHERTYPE_VLLT 0xCAFE - + #define PROTOCOL_ICMP 1 #define PROTOCOL_IGMP 2 #define PROTOCOL_TCP 6 @@ -71,7 +71,7 @@ #define PROTOCOL_OSPF 89 #define PROTOCOL_SCTP 132 - /* Type Defines: */ + /* Type Defines: */ /** Type define for a protocol IP address of a device on a network. */ typedef struct { @@ -79,3 +79,4 @@ } IP_Address_t; #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c index fec74b37b..11a09afb9 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * Echo requests from the host, to indicate a successful network connection between the host * and the virtual server. */ - + #include "ICMP.h" /** Processes an ICMP packet inside an Ethernet frame, and writes the appropriate response @@ -64,9 +64,9 @@ int16_t ICMP_ProcessICMPPacket(Ethernet_Frame_Info_t* const FrameIN, ICMPHeaderOUT->Checksum = 0; ICMPHeaderOUT->Id = ICMPHeaderIN->Id; ICMPHeaderOUT->Sequence = ICMPHeaderIN->Sequence; - + intptr_t DataSize = FrameIN->FrameLength - ((((intptr_t)InDataStart + sizeof(ICMP_Header_t)) - (intptr_t)FrameIN->FrameData)); - + /* Copy the remaining payload to the response - echo requests should echo back any sent data */ memmove(&((uint8_t*)OutDataStart)[sizeof(ICMP_Header_t)], &((uint8_t*)InDataStart)[sizeof(ICMP_Header_t)], @@ -77,6 +77,7 @@ int16_t ICMP_ProcessICMPPacket(Ethernet_Frame_Info_t* const FrameIN, /* Return the size of the response so far */ return (DataSize + sizeof(ICMP_Header_t)); } - + return NO_RESPONSE; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h index 9982560b1..26cd7cd1c 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,18 +39,18 @@ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - + /* Macros: */ /** ICMP message type constant, indicating an ICMP ECHO Reply message. */ #define ICMP_TYPE_ECHOREPLY 0 /** ICMP message type constant, indicating a packet destination is unreachable. */ #define ICMP_TYPE_DESTINATIONUNREACHABLE 3 - + /** ICMP message type constant, indicating an ICMP Source Quench message. */ #define ICMP_TYPE_SOURCEQUENCH 4 @@ -62,7 +62,7 @@ /** ICMP message type constant, indicating an ICMP Time Exceeded message. */ #define ICMP_TYPE_TIMEEXCEEDED 11 - + /* Type Defines: */ /** Type define for an ICMP message header. */ typedef struct @@ -73,10 +73,11 @@ uint16_t Id; /**< Id of the ICMP message */ uint16_t Sequence; /**< Sequence number of the ICMP message, to link together message responses */ } ICMP_Header_t; - + /* Function Prototypes: */ int16_t ICMP_ProcessICMPPacket(Ethernet_Frame_Info_t* const FrameIN, void* InDataStart, void* OutDataStart); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c index 6f49eac88..5a2285c6d 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Internet Protocol (IP) packet handling routines. This protocol handles IP packets from the * host which typically encapsulate other protocols such as ICMP, UDP and TCP. */ - + #include "IP.h" /** Processes an IP packet inside an Ethernet frame, and writes the appropriate response @@ -67,7 +67,7 @@ int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN, { return NO_RESPONSE; } - + /* Pass off the IP payload to the appropriate protocol processing routine */ switch (IPHeaderIN->Protocol) { @@ -79,15 +79,15 @@ int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN, case PROTOCOL_TCP: RetSize = TCP_ProcessTCPPacket(InDataStart, &((uint8_t*)InDataStart)[HeaderLengthBytes], - &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); + &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); break; case PROTOCOL_UDP: RetSize = UDP_ProcessUDPPacket(InDataStart, &((uint8_t*)InDataStart)[HeaderLengthBytes], - &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); + &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); break; } - + /* Check to see if the protocol processing routine has filled out a response */ if (RetSize > 0) { @@ -104,12 +104,13 @@ int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN, IPHeaderOUT->TTL = DEFAULT_TTL; IPHeaderOUT->SourceAddress = IPHeaderIN->DestinationAddress; IPHeaderOUT->DestinationAddress = IPHeaderIN->SourceAddress; - + IPHeaderOUT->HeaderChecksum = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t)); - + /* Return the size of the response so far */ return (sizeof(IP_Header_t) + RetSize); } - + return RetSize; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h index 215695756..da9dc1549 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,18 +32,18 @@ * * Header file for IP.c. */ - + #ifndef _IP_H_ #define _IP_H_ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - + /* Macros: */ /** Protocol IP address of the host (client) machine, once assigned by DHCP. */ #define CLIENT_IP_ADDRESS { 10, 0, 0, 1} @@ -58,16 +58,16 @@ * is reached. */ #define DEFAULT_TTL 128 - + /** Performs a comparison between two IP addresses, indicating if they are identical. - * + * * \param[in] IP1 First IP address * \param[in] IP2 Second IP address * * \return True if the addresses match, false otherwise */ #define IP_COMPARE(IP1, IP2) (memcmp(IP1, IP2, sizeof(IP_Address_t)) == 0) - + /* Type Defines: */ /** Type define of an IP packet header. */ typedef struct @@ -84,14 +84,15 @@ uint8_t TTL; /**< Maximum allowable number of hops to reach the packet destination */ uint8_t Protocol; /**< Encapsulated protocol type */ uint16_t HeaderChecksum; /**< Ethernet checksum of the IP header */ - + IP_Address_t SourceAddress; /**< Source protocol IP address of the packet */ IP_Address_t DestinationAddress; /**< Destination protocol IP address of the packet */ } IP_Header_t; - + /* Function Prototypes: */ int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN, void* InDataStart, void* OutDataStart); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c index 676bf7a94..99e3ab46b 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -31,7 +31,7 @@ /* Protocol decoders for Ethernet, TCP, IP, ICMP and ARP. Each of these routines accepts a header to the appropriate protocol and prints out pertinent information on the packet through the serial port. - + To disable printing of a specific protocol, define the token NO_DECODE_{Protocol} in the project makefile, and pass it to the compiler using the -D switch. */ @@ -46,7 +46,7 @@ * Packet decoding routines can be disabled by defining NO_DECODE_{Protocol Name} in the project makefile * and passing it to the compiler via the -D switch. */ - + #include "ProtocolDecoders.h" /** Decodes an Ethernet frame header and prints its contents to through the USART in a human readable format. @@ -57,9 +57,9 @@ void DecodeEthernetFrameHeader(Ethernet_Frame_Info_t* const FrameINData) { #if !defined(NO_DECODE_ETHERNET) Ethernet_Frame_Header_t* FrameHeader = (Ethernet_Frame_Header_t*)FrameINData->FrameData; - + printf_P(PSTR("\r\n")); - + printf_P(PSTR(" ETHERNET\r\n")); printf_P(PSTR(" + Frame Size: %u\r\n"), FrameINData->FrameLength); @@ -98,7 +98,7 @@ void DecodeEthernetFrameHeader(Ethernet_Frame_Info_t* const FrameINData) void DecodeARPHeader(void* InDataStart) { #if !defined(NO_DECODE_ARP) - ARP_Header_t* ARPHeader = (ARP_Header_t*)InDataStart; + ARP_Header_t* ARPHeader = (ARP_Header_t*)InDataStart; printf_P(PSTR(" \\\r\n ARP\r\n")); @@ -106,12 +106,12 @@ void DecodeARPHeader(void* InDataStart) !(MAC_COMPARE(&ARPHeader->THA, &ServerMACAddress))) { printf_P(PSTR(" + NOT ADDRESSED TO DEVICE\r\n")); - return; + return; } printf_P(PSTR(" + Protocol: %x\r\n"), SwapEndian_16(ARPHeader->ProtocolType)); printf_P(PSTR(" + Operation: %u\r\n"), SwapEndian_16(ARPHeader->Operation)); - + if (SwapEndian_16(ARPHeader->ProtocolType) == ETHERTYPE_IPV4) { printf_P(PSTR(" + SHA MAC: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), ARPHeader->SHA.Octets[0], @@ -163,14 +163,14 @@ void DecodeIPHeader(void* InDataStart) printf_P(PSTR(" + Header Length: %u Bytes\r\n"), HeaderLengthBytes); printf_P(PSTR(" + Packet Version: %u\r\n"), IPHeader->Version); printf_P(PSTR(" + Total Length: %u\r\n"), SwapEndian_16(IPHeader->TotalLength)); - + printf_P(PSTR(" + Protocol: %u\r\n"), IPHeader->Protocol); printf_P(PSTR(" + TTL: %u\r\n"), IPHeader->TTL); - + printf_P(PSTR(" + IP Src: %u.%u.%u.%u\r\n"), IPHeader->SourceAddress.Octets[0], IPHeader->SourceAddress.Octets[1], IPHeader->SourceAddress.Octets[2], - IPHeader->SourceAddress.Octets[3]); + IPHeader->SourceAddress.Octets[3]); printf_P(PSTR(" + IP Dst: %u.%u.%u.%u\r\n"), IPHeader->DestinationAddress.Octets[0], IPHeader->DestinationAddress.Octets[1], @@ -215,9 +215,9 @@ void DecodeTCPHeader(void* InDataStart) printf_P(PSTR(" + Sequence Number: %lu\r\n"), SwapEndian_32(TCPHeader->SequenceNumber)); printf_P(PSTR(" + Acknowledgment Number: %lu\r\n"), SwapEndian_32(TCPHeader->AcknowledgmentNumber)); - + printf_P(PSTR(" + Flags: 0x%02X\r\n"), TCPHeader->Flags); - + if (TCP_GetPortState(TCPHeader->DestinationPort) == TCP_Port_Closed) printf_P(PSTR(" + NOT LISTENING ON DESTINATION PORT\r\n")); #endif @@ -272,9 +272,10 @@ void DecodeDHCPHeader(void* InDataStart) break; } } - + DHCPOptions += ((DHCPOptions[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptions[1] + 2)); } #endif } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h index c1d3b395d..572fdeb82 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -40,13 +40,13 @@ #include <avr/io.h> #include <avr/pgmspace.h> #include <stdio.h> - + #include <LUFA/Drivers/USB/Class/RNDIS.h> #include <LUFA/Drivers/Peripheral/SerialStream.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" - + /* Function Prototypes: */ void DecodeEthernetFrameHeader(Ethernet_Frame_Info_t* const FrameINData); void DecodeARPHeader(void* InDataStart); @@ -57,3 +57,4 @@ void DecodeDHCPHeader(void* InDataStart); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c index 5889c45b3..dda9883ea 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * and reception of packets to and from devices on a network, to "ports" on the device. It is used in situations where data * delivery must be reliable and correct, e.g. HTTP, TELNET and most other non-streaming protocols. */ - + #define INCLUDE_FROM_TCP_C #include "TCP.h" @@ -64,7 +64,7 @@ void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++) { /* Run the application handler for the port */ - if ((PortStateTable[PTableEntry].Port == ConnectionStateTable[CSTableEntry].Port) && + if ((PortStateTable[PTableEntry].Port == ConnectionStateTable[CSTableEntry].Port) && (PortStateTable[PTableEntry].State == TCP_Port_Open)) { PortStateTable[PTableEntry].ApplicationHandler(&ConnectionStateTable[CSTableEntry], @@ -72,14 +72,14 @@ void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) } } } - + /* Get pointer to the output frame info struct for convenience */ Ethernet_Frame_Info_t* FrameOUT = &RNDISInterfaceInfo->State.FrameOUT; - + /* Bail out early if there is already a frame waiting to be sent in the Ethernet OUT buffer */ if (FrameOUT->FrameInBuffer) return; - + /* Send response packets from each application as the TCP packet buffers are filled by the applications */ for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++) { @@ -111,7 +111,7 @@ void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) TCPHeaderOUT->Reserved = 0; memcpy(TCPDataOUT, ConnectionStateTable[CSTableEntry].Info.Buffer.Data, PacketSize); - + ConnectionStateTable[CSTableEntry].Info.SequenceNumberOut += PacketSize; TCPHeaderOUT->Checksum = TCP_Checksum16(TCPHeaderOUT, ServerIPAddress, @@ -133,11 +133,11 @@ void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) IPHeaderOUT->TTL = DEFAULT_TTL; IPHeaderOUT->SourceAddress = ServerIPAddress; IPHeaderOUT->DestinationAddress = ConnectionStateTable[CSTableEntry].RemoteAddress; - + IPHeaderOUT->HeaderChecksum = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t)); - + PacketSize += sizeof(IP_Header_t); - + /* Fill out the response Ethernet frame header */ FrameOUTHeader->Source = ServerMACAddress; FrameOUTHeader->Destination = (MAC_Address_t){{0x02, 0x00, 0x02, 0x00, 0x02, 0x00}}; @@ -148,9 +148,9 @@ void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) /* Set the response length in the buffer and indicate that a response is ready to be sent */ FrameOUT->FrameLength = PacketSize; FrameOUT->FrameInBuffer = true; - + ConnectionStateTable[CSTableEntry].Info.Buffer.Ready = false; - + break; } } @@ -210,7 +210,7 @@ bool TCP_SetPortState(const uint16_t Port, return true; } } - + /* Port not in table and no room to add it, return failure */ return false; } @@ -237,7 +237,7 @@ uint8_t TCP_GetPortState(const uint16_t Port) if (PortStateTable[PTableEntry].Port == Port) return PortStateTable[PTableEntry].State; } - + /* Port not in table, assume closed */ return TCP_Port_Closed; } @@ -270,20 +270,20 @@ bool TCP_SetConnectionState(const uint16_t Port, return true; } } - + for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++) { /* Find empty entry in the table */ if (ConnectionStateTable[CSTableEntry].State == TCP_Connection_Closed) { ConnectionStateTable[CSTableEntry].Port = Port; - ConnectionStateTable[CSTableEntry].RemoteAddress = RemoteAddress; + ConnectionStateTable[CSTableEntry].RemoteAddress = RemoteAddress; ConnectionStateTable[CSTableEntry].RemotePort = RemotePort; ConnectionStateTable[CSTableEntry].State = State; return true; } } - + return false; } @@ -307,12 +307,12 @@ uint8_t TCP_GetConnectionState(const uint16_t Port, if ((ConnectionStateTable[CSTableEntry].Port == Port) && IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, &RemoteAddress) && ConnectionStateTable[CSTableEntry].RemotePort == RemotePort) - + { return ConnectionStateTable[CSTableEntry].State; } } - + return TCP_Connection_Closed; } @@ -340,7 +340,7 @@ TCP_ConnectionInfo_t* TCP_GetConnectionInfo(const uint16_t Port, return &ConnectionStateTable[CSTableEntry].Info; } } - + return NULL; } @@ -364,11 +364,11 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCP_Header_t* TCPHeaderOUT = (TCP_Header_t*)TCPHeaderOutStart; TCP_ConnectionInfo_t* ConnectionInfo; - + DecodeTCPHeader(TCPHeaderInStart); bool PacketResponse = false; - + /* Check if the destination port is open and allows incoming connections */ if (TCP_GetPortState(TCPHeaderIN->DestinationPort) == TCP_Port_Open) { @@ -382,8 +382,8 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Closed)) { - TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); - PacketResponse = true; + TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); + PacketResponse = true; } } else @@ -398,7 +398,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_SYNReceived)) { - TCPHeaderOUT->Flags = (TCP_FLAG_SYN | TCP_FLAG_ACK); + TCPHeaderOUT->Flags = (TCP_FLAG_SYN | TCP_FLAG_ACK); ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort); @@ -410,10 +410,10 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, { TCPHeaderOUT->Flags = TCP_FLAG_RST; } - + PacketResponse = true; } - + break; case TCP_Connection_SYNReceived: if (TCPHeaderIN->Flags == TCP_FLAG_ACK) @@ -425,19 +425,19 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort); - + ConnectionInfo->SequenceNumberOut++; } - + break; case TCP_Connection_Established: if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK)) { /* FIN ACK when connected to a peer starts the finalization process */ - - TCPHeaderOUT->Flags = (TCP_FLAG_FIN | TCP_FLAG_ACK); + + TCPHeaderOUT->Flags = (TCP_FLAG_FIN | TCP_FLAG_ACK); PacketResponse = true; - + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_CloseWait); @@ -452,14 +452,14 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort); - /* Check if the buffer is currently in use either by a buffered data to send, or receive */ + /* Check if the buffer is currently in use either by a buffered data to send, or receive */ if ((ConnectionInfo->Buffer.InUse == false) && (ConnectionInfo->Buffer.Ready == false)) - { + { ConnectionInfo->Buffer.Direction = TCP_PACKETDIR_IN; ConnectionInfo->Buffer.InUse = true; ConnectionInfo->Buffer.Length = 0; } - + /* Check if the buffer has been claimed by us to read in data from the peer */ if ((ConnectionInfo->Buffer.Direction == TCP_PACKETDIR_IN) && (ConnectionInfo->Buffer.Length != TCP_WINDOW_SIZE)) @@ -475,7 +475,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo->SequenceNumberIn += DataLength; ConnectionInfo->Buffer.Length += DataLength; - + /* Check if the buffer is full or if the PSH flag is set, if so indicate buffer ready */ if ((!(TCP_WINDOW_SIZE - ConnectionInfo->Buffer.Length)) || (TCPHeaderIN->Flags & TCP_FLAG_PSH)) { @@ -492,7 +492,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, return NO_PROCESS; } } - + break; case TCP_Connection_Closing: ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, @@ -500,9 +500,9 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCPHeaderOUT->Flags = (TCP_FLAG_ACK | TCP_FLAG_FIN); PacketResponse = true; - + ConnectionInfo->Buffer.InUse = false; - + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_FINWait1); @@ -518,7 +518,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo->SequenceNumberIn++; ConnectionInfo->SequenceNumberOut++; - + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Closed); } @@ -527,7 +527,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_FINWait2); } - + break; case TCP_Connection_FINWait2: if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK)) @@ -540,11 +540,11 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo->SequenceNumberIn++; ConnectionInfo->SequenceNumberOut++; - + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Closed); } - + break; case TCP_Connection_CloseWait: if (TCPHeaderIN->Flags == TCP_FLAG_ACK) @@ -552,7 +552,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Closed); } - + break; } } @@ -560,10 +560,10 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, else { /* Port is not open, indicate via a RST/ACK response to the sender */ - TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); + TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); PacketResponse = true; } - + /* Check if we need to respond to the sent packet */ if (PacketResponse) { @@ -575,7 +575,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCPHeaderOUT->SequenceNumber = SwapEndian_32(ConnectionInfo->SequenceNumberOut); TCPHeaderOUT->AcknowledgmentNumber = SwapEndian_32(ConnectionInfo->SequenceNumberIn); TCPHeaderOUT->DataOffset = (sizeof(TCP_Header_t) / sizeof(uint32_t)); - + if (!(ConnectionInfo->Buffer.InUse)) TCPHeaderOUT->WindowSize = SwapEndian_16(TCP_WINDOW_SIZE); else @@ -584,11 +584,11 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCPHeaderOUT->UrgentPointer = 0; TCPHeaderOUT->Checksum = 0; TCPHeaderOUT->Reserved = 0; - + TCPHeaderOUT->Checksum = TCP_Checksum16(TCPHeaderOUT, IPHeaderIN->DestinationAddress, - IPHeaderIN->SourceAddress, sizeof(TCP_Header_t)); + IPHeaderIN->SourceAddress, sizeof(TCP_Header_t)); - return sizeof(TCP_Header_t); + return sizeof(TCP_Header_t); } return NO_RESPONSE; @@ -610,10 +610,10 @@ static uint16_t TCP_Checksum16(void* TCPHeaderOutStart, const uint16_t TCPOutSize) { uint32_t Checksum = 0; - + /* TCP/IP checksums are the addition of the one's compliment of each word including the IP pseudo-header, complimented */ - + Checksum += ((uint16_t*)&SourceAddress)[0]; Checksum += ((uint16_t*)&SourceAddress)[1]; Checksum += ((uint16_t*)&DestinationAddress)[0]; @@ -623,12 +623,13 @@ static uint16_t TCP_Checksum16(void* TCPHeaderOutStart, for (uint16_t CurrWord = 0; CurrWord < (TCPOutSize >> 1); CurrWord++) Checksum += ((uint16_t*)TCPHeaderOutStart)[CurrWord]; - + if (TCPOutSize & 0x01) Checksum += (((uint16_t*)TCPHeaderOutStart)[TCPOutSize >> 1] & 0x00FF); - + while (Checksum & 0xFFFF0000) Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16)); - + return ~Checksum; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h index d412647eb..721657e4a 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,11 +39,11 @@ /* Includes: */ #include <avr/io.h> #include <stdbool.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - + /* Macros: */ /** Maximum number of TCP ports which can be open at the one time. */ #define MAX_OPEN_TCP_PORTS 1 @@ -53,16 +53,16 @@ /** TCP window size, giving the maximum number of bytes which can be buffered at the one time. */ #define TCP_WINDOW_SIZE 512 - + /** Port number for HTTP transmissions. */ #define TCP_PORT_HTTP SwapEndian_16(80) - + /** Data direction indicator for a TCP application buffer, indicating data from host-to-device. */ #define TCP_PACKETDIR_IN false /** Data direction indicator for a TCP application buffer, indicating data from device-to-host. */ #define TCP_PACKETDIR_OUT true - + /** Congestion Window Reduced TCP flag mask. */ #define TCP_FLAG_CWR (1 << 7) @@ -86,7 +86,7 @@ /** Connection Finalize TCP flag mask. */ #define TCP_FLAG_FIN (1 << 0) - + /** Application macro: Determines if the given application buffer contains a packet received from the host * * \param[in] Buffer Application buffer to check @@ -138,7 +138,7 @@ * \param[in] Buffer Application buffer to clear */ #define TCP_APP_CLEAR_BUFFER(Buffer) MACROS{ Buffer->Ready = false; Buffer->Length = 0; }MACROE - + /** Application macro: Closes an open connection to a host. * * \param[in] Connection Open TCP connection to close @@ -152,7 +152,7 @@ TCP_Port_Closed = 0, /**< TCP port closed, no connections to a host may be made on this port. */ TCP_Port_Open = 1, /**< TCP port open, connections to a host may be made on this port. */ }; - + /** Enum for possible TCP connection states. */ enum TCP_ConnectionStates_t { @@ -166,9 +166,9 @@ TCP_Connection_Closing = 7, /**< Unused */ TCP_Connection_LastACK = 8, /**< Unused */ TCP_Connection_TimeWait = 9, /**< Unused */ - TCP_Connection_Closed = 10, /**< Connection closed in both directions */ + TCP_Connection_Closed = 10, /**< Connection closed in both directions */ }; - + /* Type Defines: */ /** Type define for a TCP connection buffer structure, including size, data and direction. */ typedef struct @@ -185,7 +185,7 @@ /** Type define for a TCP connection information structure. */ typedef struct { - uint32_t SequenceNumberIn; /**< Current TCP sequence number for host-to-device */ + uint32_t SequenceNumberIn; /**< Current TCP sequence number for host-to-device */ uint32_t SequenceNumberOut; /**< Current TCP sequence number for device-to-host */ TCP_ConnectionBuffer_t Buffer; /**< Connection application data buffer */ } TCP_ConnectionInfo_t; @@ -214,19 +214,19 @@ { uint16_t SourcePort; /**< Source port of the TCP packet */ uint16_t DestinationPort; /**< Destination port of the TCP packet */ - + uint32_t SequenceNumber; /**< Data sequence number of the packet */ uint32_t AcknowledgmentNumber; /**< Data acknowledgment number of the packet */ - + unsigned char Reserved : 4; /**< Reserved, must be all 0 */ unsigned char DataOffset : 4; /**< Offset of the data from the start of the header, in 4 byte chunks */ uint8_t Flags; /**< TCP packet flags */ uint16_t WindowSize; /**< Current data window size (bytes remaining in reception buffer) */ - + uint16_t Checksum; /**< TCP checksum */ uint16_t UrgentPointer; /**< Urgent data pointer */ } TCP_Header_t; - + /* Function Prototypes: */ void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo); void TCP_Init(void); @@ -256,3 +256,4 @@ #endif #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c index 15b065656..9637bebcb 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * User Datagram Protocol (UDP) packet handling routines. This protocol handles high throughput, low * reliability packets which are typically used to encapsulate streaming data. */ - + #define INCLUDE_FROM_UDP_C #include "UDP.h" @@ -52,11 +52,11 @@ int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, { UDP_Header_t* UDPHeaderIN = (UDP_Header_t*)UDPHeaderInStart; UDP_Header_t* UDPHeaderOUT = (UDP_Header_t*)UDPHeaderOutStart; - + int16_t RetSize = NO_RESPONSE; - + DecodeUDPHeader(UDPHeaderInStart); - + switch (SwapEndian_16(UDPHeaderIN->DestinationPort)) { case UDP_PORT_DHCP_REQUEST: @@ -65,7 +65,7 @@ int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, &((uint8_t*)UDPHeaderOutStart)[sizeof(UDP_Header_t)]); break; } - + /* Check to see if the protocol processing routine has filled out a response */ if (RetSize > 0) { @@ -78,6 +78,7 @@ int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, /* Return the size of the response so far */ return (sizeof(UDP_Header_t) + RetSize); } - + return NO_RESPONSE; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h index 57abd0dc7..425bbe30d 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,12 +38,12 @@ /* Includes: */ #include <avr/io.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" #include "DHCP.h" - + /* Macros: */ /** Source UDP port for a DHCP request. */ #define UDP_PORT_DHCP_REQUEST 67 @@ -60,10 +60,11 @@ uint16_t Length; /**< Total packet length, in bytes */ uint16_t Checksum; /**< Optional UDP packet checksum */ } UDP_Header_t; - + /* Function Prototypes: */ int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, void* UDPHeaderInStart, void* UDPHeaderOutStart); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c index 4fab86cfb..08ab0687b 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -54,7 +54,7 @@ char PROGMEM HTTP404Header[] = "HTTP/1.1 404 Not Found\r\n" /** HTTP page to serve to the host when a HTTP request is made. This page is too long for a single response, thus it is automatically * broken up into smaller blocks and sent as a series of packets each time the webserver application callback is run. */ -char PROGMEM HTTPPage[] = +char PROGMEM HTTPPage[] = "<html>" " <head>" " <title>" @@ -108,7 +108,7 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { char* BufferDataStr = (char*)Buffer->Data; static uint8_t PageBlock = 0; - + /* Check to see if a packet has been received on the HTTP port from a remote host */ if (TCP_APP_HAS_RECEIVED_PACKET(Buffer)) { @@ -120,7 +120,7 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, /* Copy the HTTP 200 response header into the packet buffer */ strcpy_P(BufferDataStr, HTTP200Header); - + /* Send the buffer contents to the host */ TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); @@ -131,10 +131,10 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { /* Copy the HTTP 404 response header into the packet buffer */ strcpy_P(BufferDataStr, HTTP404Header); - + /* Send the buffer contents to the host */ TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); - + /* All data sent, close the connection */ TCP_APP_CLOSECONNECTION(ConnectionState); } @@ -155,9 +155,9 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, strcpy_P(BufferDataStr, HTTP404Header); /* Send the buffer contents to the host */ - TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); + TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); } - + /* All data sent, close the connection */ TCP_APP_CLOSECONNECTION(ConnectionState); } @@ -165,7 +165,7 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { /* Echo the host's query back to the host */ TCP_APP_SEND_BUFFER(Buffer, Buffer->Length); - + /* All data sent, close the connection */ TCP_APP_CLOSECONNECTION(ConnectionState); } @@ -179,13 +179,13 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { uint16_t RemLength = strlen_P(&HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE]); uint16_t Length; - + /* Determine the length of the loaded block */ Length = ((RemLength > HTTP_REPLY_BLOCK_SIZE) ? HTTP_REPLY_BLOCK_SIZE : RemLength); /* Copy the next buffer sized block of the page to the packet buffer */ strncpy_P(BufferDataStr, &HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE], Length); - + /* Send the buffer contents to the host */ TCP_APP_SEND_BUFFER(Buffer, Length); @@ -194,9 +194,10 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { /* Unlock the buffer so that the host can fill it with future packets */ TCP_APP_RELEASE_BUFFER(Buffer); - + /* Close the connection to the host */ TCP_APP_CLOSECONNECTION(ConnectionState); } } } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h index 87fe1c91d..7abd6adc9 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,25 +32,26 @@ * * Header file for Webserver.c. */ - + #ifndef _WEBSERVER_H_ #define _WEBSERVER_H_ /* Includes: */ #include <avr/io.h> #include <avr/pgmspace.h> - + #include <LUFA/Version.h> - + #include "TCP.h" - + /* Macros: */ /** Maximum size of a HTTP response per transmission */ #define HTTP_REPLY_BLOCK_SIZE 128 - + /* Function Prototypes: */ void Webserver_Init(void); void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, TCP_ConnectionBuffer_t* const Buffer); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c index d332b206a..1dbd7db5a 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -57,7 +57,7 @@ USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface = .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, .NotificationEndpointDoubleBank = false, - + .AdapterVendorDescription = "LUFA RNDIS Demo Adapter", .AdapterMACAddress = {ADAPTER_MAC_ADDRESS}, }, @@ -135,3 +135,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { RNDIS_Device_ProcessControlRequest(&Ethernet_RNDIS_Interface); } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h index a689ee819..2cbdb3104 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for RNDISEthernet.c. */ - + #ifndef _RNDISETHERNET_H_ #define _RNDISETHERNET_H_ @@ -71,7 +71,7 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - + /* Function Prototypes: */ void SetupHardware(void); @@ -79,5 +79,6 @@ void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); - + #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt index f9cd651d0..906ea0101 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage RNDIS Class Ethernet Demo (with Webserver/Telnet) * * \section SSec_Compat Demo Compatibility: @@ -26,7 +26,7 @@ * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td> * </tr> @@ -40,7 +40,7 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Remote Network Driver Interface demonstration application. * This gives a simple reference application for implementing @@ -49,7 +49,7 @@ * standard; this demo will only work on Windows 2000 (manually * patched with the Microsoft RNDIS hotfix) and above (with no * manual patches), or on the latest Linux kernels. - * + * * Before running, you will need to install the INF file that * is located in the RNDISEthernet project directory. This will * enable Windows to use its inbuilt RNDIS drivers, negating the @@ -58,7 +58,7 @@ * Windows 2000 is used, the Microsoft INF file in the hotfix * will need to be altered to use the VID/PID of the demo and * then chosen instead of the LUFA RNDIS INF file when prompted. - * + * * When enumerated, this demo will install as a new network * adapter which ethernet packets can be sent to and received * from. Running on top of the adapter is a very simple TCP/IP @@ -66,10 +66,10 @@ * accessed through a web browser at IP address 10.0.0.2:80 or * through a TELNET client at 10.0.0.2:25. This device also supports * ping echos via the ICMP protocol. - * + * * \note The TCP/IP stack in this demo has a number of limitations * and should serve as an example only - it is not fully featured nor - * compliant to the TCP/IP specification. For complete projects, it is + * compliant to the TCP/IP specification. For complete projects, it is * recommended that it be replaced with an external open source TCP/IP * stack that is feature complete, such as the uIP stack. * @@ -120,3 +120,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile index 2d0a6ef40..2d3e5d541 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/makefile +++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -154,7 +154,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -167,7 +167,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -281,7 +281,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -294,7 +294,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -306,7 +306,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -318,7 +318,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -341,7 +341,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -375,7 +375,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -409,7 +409,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -438,7 +438,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -457,10 +457,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -525,11 +525,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -556,9 +556,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -656,14 +656,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -685,7 +685,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -728,4 +728,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) .PHONY : all begin finish end sizebefore sizeafter gccversion \ build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ -debug gdb-config
\ No newline at end of file +debug gdb-config diff --git a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c index ac45d0f64..1d98fbb81 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c +++ b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -83,102 +83,102 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 2, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .CDC_CCI_Interface = + + .CDC_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_Functional_Header = + .CDC_Functional_Header = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Header, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC_Functional_ACM = + .CDC_Functional_ACM = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_ACM, - + .Capabilities = 0x06, }, - - .CDC_Functional_Union = + + .CDC_Functional_Union = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Union, - + .MasterInterfaceNumber = 0, .SlaveInterfaceNumber = 1, }, - .CDC_NotificationEndpoint = + .CDC_NotificationEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF }, - .CDC_DCI_Interface = + .CDC_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_DataOutEndpoint = + .CDC_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .CDC_DataInEndpoint = + + .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, @@ -241,30 +241,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h index 159d8d265..ddd9495ea 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h +++ b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -83,3 +83,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c index 1ee0b344c..258164f8a 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c +++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the VirtualSerial demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "VirtualSerial.h" /** LUFA CDC Class driver interface configuration and state information. This structure is @@ -71,7 +71,7 @@ static FILE USBSerialStream; int main(void) { SetupHardware(); - + /* Create a regular character stream for the interface so that it can be used with the stdio.h functions */ CDC_Device_CreateStream(&VirtualSerial_CDC_Interface, &USBSerialStream); @@ -81,7 +81,7 @@ int main(void) for (;;) { CheckJoystickMovement(); - + /* Must throw away unused bytes from the host, or it will lock up while waiting for the device */ CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface); @@ -112,7 +112,7 @@ void CheckJoystickMovement(void) uint8_t JoyStatus_LCL = Joystick_GetStatus(); char* ReportString = NULL; static bool ActionSent = false; - + if (JoyStatus_LCL & JOY_UP) ReportString = "Joystick Up\r\n"; else if (JoyStatus_LCL & JOY_DOWN) @@ -125,7 +125,7 @@ void CheckJoystickMovement(void) ReportString = "Joystick Pressed\r\n"; else ActionSent = false; - + if ((ReportString != NULL) && (ActionSent == false)) { ActionSent = true; @@ -165,3 +165,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface); } + diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h index e4d79139c..a16e4a7a1 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h +++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -64,7 +64,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void CheckJoystickMovement(void); @@ -75,3 +75,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void); #endif + diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt index 571168948..4190c2f7d 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt +++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Communications Device Class (Virtual Serial Port) Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Abstract Control Model (ACM)</td> * </tr> @@ -42,14 +42,14 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Communications Device Class demonstration application. * This gives a simple reference application for implementing * a CDC device acting as a virtual serial port. Joystick * actions are transmitted to the host as strings. The device * does not respond to serial data sent from the host. - * + * * After running this demo for the first time on a new computer, * you will need to supply the .INF file located in this demo * project's directory as the device's driver when running under @@ -70,3 +70,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile index a2e8eb366..1f43438ab 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/makefile +++ b/Demos/Device/ClassDriver/VirtualSerial/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c index 2a52edcd4..8591195cf 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -93,22 +93,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0xEF, .SubClass = 0x02, .Protocol = 0x01, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2062, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = USE_INTERNAL_SERIAL, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -119,22 +119,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 3, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - .CDC_IAD = + .CDC_IAD = { .Header = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation}, @@ -147,111 +147,111 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .IADStrIndex = NO_DESCRIPTOR }, - - .CDC_CCI_Interface = + + .CDC_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_Functional_Header = + .CDC_Functional_Header = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Header, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC_Functional_ACM = + .CDC_Functional_ACM = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_ACM, - + .Capabilities = 0x06, }, - - .CDC_Functional_Union = + + .CDC_Functional_Union = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Union, - + .MasterInterfaceNumber = 0, .SlaveInterfaceNumber = 1, }, - .CDC_NotificationEndpoint = + .CDC_NotificationEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF }, - .CDC_DCI_Interface = + .CDC_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_DataOutEndpoint = + .CDC_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .CDC_DataInEndpoint = + + .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - .HID_Interface = + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 2, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = HID_BOOTP_MouseBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_MouseHID = + .HID_MouseHID = { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, @@ -262,7 +262,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .HIDReportLength = sizeof(MouseReport) }, - .HID_ReportINEndpoint = + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -328,38 +328,39 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case HID_DTYPE_HID: + case HID_DTYPE_HID: Address = &ConfigurationDescriptor.HID_MouseHID; Size = sizeof(USB_HID_Descriptor_HID_t); break; - case HID_DTYPE_Report: + case HID_DTYPE_Report: Address = &MouseReport; Size = sizeof(MouseReport); break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h index 6b6178a93..85a5aed84 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -42,7 +42,7 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/CDC.h> #include <LUFA/Drivers/USB/Class/HID.h> - + /* Macros: */ /** Endpoint number of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPNUM 2 @@ -61,10 +61,10 @@ /** Endpoint number of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPNUM 1 - + /** Size in bytes of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPSIZE 8 - + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which @@ -94,3 +94,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c index 8372d4e1b..d5b45edd8 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the VirtualSerialMouse demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "VirtualSerialMouse.h" /** LUFA CDC Class driver interface configuration and state information. This structure is @@ -88,14 +88,14 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface = int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); for (;;) { CheckJoystickMovement(); - + /* Must throw away unused bytes from the host, or it will lock up while waiting for the device */ CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface); @@ -127,7 +127,7 @@ void CheckJoystickMovement(void) uint8_t JoyStatus_LCL = Joystick_GetStatus(); char* ReportString = NULL; static bool ActionSent = false; - + if (JoyStatus_LCL & JOY_UP) ReportString = "Joystick Up\r\n"; else if (JoyStatus_LCL & JOY_DOWN) @@ -140,12 +140,12 @@ void CheckJoystickMovement(void) ReportString = "Joystick Pressed\r\n"; else ActionSent = false; - + if ((ReportString != NULL) && (ActionSent == false)) { ActionSent = true; - - CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString, strlen(ReportString)); + + CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString, strlen(ReportString)); } } @@ -171,7 +171,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) USB_Device_EnableSOFEvents(); - LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); } /** Event handler for the library USB Unhandled Control Request event. */ @@ -204,7 +204,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn uint16_t* const ReportSize) { USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData; - + uint8_t JoyStatus_LCL = Joystick_GetStatus(); uint8_t ButtonStatus_LCL = Buttons_GetStatus(); @@ -220,10 +220,10 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) MouseReport->Button |= (1 << 0); - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) MouseReport->Button |= (1 << 1); - + *ReportSize = sizeof(USB_MouseReport_Data_t); return true; } @@ -244,3 +244,4 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI { // Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports } + diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h index 9081253ea..16c7891ae 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -65,7 +65,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void CheckJoystickMovement(void); @@ -82,8 +82,9 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); #endif + diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt index f43ef0de7..882d47dcd 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Combined Communications Device Class (Virtual Serial Port) and Mouse Demo * * \section SSec_Compat Demo Compatibility: @@ -29,7 +29,7 @@ * <td>Communications Device Class (CDC) \n * Human Interface Device Class (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Abstract Control Model (ACM) \n * Mouse Subclass</td> @@ -46,14 +46,14 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Combined Communications Device Class/Mouse demonstration application. * This gives a simple reference application for implementing a combined * CDC and HID device acting as a both a virtual serial port and a mouse. * Joystick actions are transmitted to the host as strings and as mouse * movements. The device does not respond to serial data sent from the host. - * + * * After running this demo for the first time on a new computer, * you will need to supply the .INF file located in this demo * project's directory as the device's driver when running under @@ -74,3 +74,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile index 62d95dbf8..3aa0b487f 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/makefile b/Demos/Device/ClassDriver/makefile index 271b6a426..38924273f 100644 --- a/Demos/Device/ClassDriver/makefile +++ b/Demos/Device/ClassDriver/makefile @@ -1,7 +1,7 @@ # # LUFA Library # Copyright (C) Dean Camera, 2010. -# +# # dean [at] fourwalledcubicle [dot] com # www.fourwalledcubicle.com # @@ -52,10 +52,10 @@ all: $(MAKE) -C VirtualSerial clean $(MAKE) -C VirtualSerial all - + $(MAKE) -C VirtualSerialMouse clean - $(MAKE) -C VirtualSerialMouse all - + $(MAKE) -C VirtualSerialMouse all + %: $(MAKE) -C AudioInput $@ $(MAKE) -C AudioOutput $@ @@ -71,3 +71,4 @@ all: $(MAKE) -C RNDISEthernet $@ $(MAKE) -C VirtualSerial $@ $(MAKE) -C VirtualSerialMouse $@ + |