diff options
Diffstat (limited to 'Demos/Device/ClassDriver/MassStorageKeyboard/Lib')
3 files changed, 36 insertions, 6 deletions
diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h index 3db19dad4..d7f8605be 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h @@ -63,12 +63,6 @@ /** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. */ #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) - /** Total number of logical drives within the device - must be non-zero. */ - #define TOTAL_LUNS 1 - - /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ - #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) - /* Function Prototypes: */ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const uint32_t BlockAddress, diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c index 5e0a82be2..5d0adf90a 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c @@ -113,6 +113,9 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) case SCSI_CMD_READ_10: CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ); break; + case SCSI_CMD_MODE_SENSE_6: + CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo); + break; case SCSI_CMD_TEST_UNIT_READY: case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: case SCSI_CMD_VERIFY_10: @@ -281,6 +284,17 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa uint32_t BlockAddress; uint16_t TotalBlocks; + /* Check if the disk is write protected or not */ + if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY) + { + /* Block address is invalid, update SENSE key and return command fail */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT, + SCSI_ASENSE_WRITE_PROTECTED, + SCSI_ASENSEQ_NO_QUALIFIER); + + return false; + } + /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); @@ -315,3 +329,24 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa return true; } +/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about + * the SCSI device, as well as the device's Write Protect status. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean true if the command completed successfully, false otherwise. + */ +static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + /* Send an empty header response with the Write Protect flag status */ + Endpoint_Write_Byte(0x00); + Endpoint_Write_Byte(0x00); + Endpoint_Write_Byte(DISK_READ_ONLY ? 0x80 : 0x00); + Endpoint_Write_Byte(0x00); + Endpoint_ClearIN(); + + /* Update the bytes transferred counter and succeed the command */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4; + + return true; +} diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h index bab018cc5..9a5bd802c 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h @@ -81,6 +81,7 @@ static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const bool IsDataRead); + static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); #endif #endif |