aboutsummaryrefslogtreecommitdiffstats
path: root/BuildTests
diff options
context:
space:
mode:
Diffstat (limited to 'BuildTests')
-rw-r--r--BuildTests/BoardDriverTest/makefile26
-rw-r--r--BuildTests/BoardDriverTest/makefile.avr811
-rw-r--r--BuildTests/BoardDriverTest/makefile.uc311
-rw-r--r--BuildTests/BoardDriverTest/makefile.xmega11
-rw-r--r--BuildTests/BootloaderTest/BootloaderDeviceMap.cfg59
-rw-r--r--BuildTests/BootloaderTest/makefile28
-rw-r--r--BuildTests/ModuleTest/makefile.avr811
-rw-r--r--BuildTests/ModuleTest/makefile.uc311
-rw-r--r--BuildTests/ModuleTest/makefile.xmega11
-rw-r--r--BuildTests/SingleUSBModeTest/makefile.avr811
-rw-r--r--BuildTests/SingleUSBModeTest/makefile.uc311
-rw-r--r--BuildTests/SingleUSBModeTest/makefile.xmega11
12 files changed, 112 insertions, 100 deletions
diff --git a/BuildTests/BoardDriverTest/makefile b/BuildTests/BoardDriverTest/makefile
index bc4d55977..68180c221 100644
--- a/BuildTests/BoardDriverTest/makefile
+++ b/BuildTests/BoardDriverTest/makefile
@@ -31,23 +31,23 @@ makeboardlist:
testboards:
@echo "buildtest:" > BuildMakefile
- @while read line; \
- do \
- build_cfg=`grep "$$line " BoardDeviceMap.cfg | sed 's/ //g' | grep -v "#" | cut -d'=' -f2-`; \
- \
- build_board=$$line; \
- build_arch=`echo $$build_cfg | cut -d':' -f1`; \
- build_mcu=`echo $$build_cfg | cut -d':' -f2`; \
- \
- if ( test -z "$$build_cfg" ); then \
- echo "No matching information set for board $$build_board"; \
- else \
+ @while read line; \
+ do \
+ build_cfg=`grep "$$line " BoardDeviceMap.cfg | grep -v "#" | cut -d'=' -f2- | sed 's/ //g'`; \
+ \
+ build_board=$$line; \
+ build_arch=`echo $$build_cfg | cut -d':' -f1`; \
+ build_mcu=`echo $$build_cfg | cut -d':' -f2`; \
+ \
+ if ( test -z "$$build_cfg" ); then \
+ echo "No matching information set for board $$build_board"; \
+ else \
echo "Found board configuration for $$build_board - $$build_arch, $$build_mcu"; \
- \
+ \
printf "\t@echo Building dummy project for $$build_board...\n" >> BuildMakefile; \
printf "\tmake -s -f makefile.%s clean\n" $$build_arch >> BuildMakefile; \
printf "\tmake -s -f makefile.%s MCU=%s BOARD=%s elf\n\n" $$build_arch $$build_mcu $$build_board >> BuildMakefile; \
- fi; \
+ fi; \
done < BoardList.txt
$(MAKE) -f BuildMakefile buildtest
diff --git a/BuildTests/BoardDriverTest/makefile.avr8 b/BuildTests/BoardDriverTest/makefile.avr8
index 1f0d7596f..7c213f8d2 100644
--- a/BuildTests/BoardDriverTest/makefile.avr8
+++ b/BuildTests/BoardDriverTest/makefile.avr8
@@ -149,7 +149,7 @@ ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
+OPT = 1
# Debugging format.
@@ -222,7 +222,7 @@ CFLAGS += -Wstrict-prototypes
#CFLAGS += -Wundef
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
@@ -249,7 +249,7 @@ CPPFLAGS += -Wundef
#CPPFLAGS += -Wstrict-prototypes
#CPPFLAGS += -Wunreachable-code
#CPPFLAGS += -Wsign-compare
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
@@ -263,7 +263,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+ASFLAGS = $(ADEFS)
+#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
@@ -690,7 +691,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/BuildTests/BoardDriverTest/makefile.uc3 b/BuildTests/BoardDriverTest/makefile.uc3
index 7e75b5479..fce4b1046 100644
--- a/BuildTests/BoardDriverTest/makefile.uc3
+++ b/BuildTests/BoardDriverTest/makefile.uc3
@@ -123,7 +123,7 @@ ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
+OPT = 1
# List any extra directories to look for include files here.
@@ -185,7 +185,7 @@ CFLAGS += -fno-strict-aliasing
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
CFLAGS += -masm-addr-pseudos
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
@@ -208,7 +208,7 @@ CPPFLAGS += -fno-exceptions
CPPFLAGS += -masm-addr-pseudos
CPPFLAGS += -Wall
CPPFLAGS += -Wundef
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
@@ -222,7 +222,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+ASFLAGS = $(ADEFS)
+#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Linker Options ----------------
@@ -453,7 +454,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/BuildTests/BoardDriverTest/makefile.xmega b/BuildTests/BoardDriverTest/makefile.xmega
index 5a048b8e3..a099622f9 100644
--- a/BuildTests/BoardDriverTest/makefile.xmega
+++ b/BuildTests/BoardDriverTest/makefile.xmega
@@ -140,7 +140,7 @@ ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
+OPT = 1
# List any extra directories to look for include files here.
@@ -207,7 +207,7 @@ CFLAGS += -fshort-enums
CFLAGS += -fno-strict-aliasing
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
@@ -231,7 +231,7 @@ CPPFLAGS += -fno-strict-aliasing
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CPPFLAGS += -Wundef
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
@@ -245,7 +245,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+ASFLAGS = $(ADEFS)
+#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
@@ -672,7 +673,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg b/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg
index 8cb5d28dd..a95793ccc 100644
--- a/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg
+++ b/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg
@@ -2,42 +2,43 @@
#
# ------------ CDC Bootloader -------------
CDC = avr8 : at90usb1287 : NONE : 128 : 8 :
-CDC = avr8 : at90usb647 : NONE : 64 : 4 :
+CDC = avr8 : at90usb647 : NONE : 64 : 4 :
CDC = avr8 : at90usb1286 : NONE : 128 : 8 :
-CDC = avr8 : at90usb646 : NONE : 64 : 4 :
-CDC = avr8 : atmega32u4 : NONE : 32 : 4 :
-CDC = avr8 : atmega16u4 : NONE : 16 : 4 :
-CDC = avr8 : atmega32u2 : NONE : 32 : 4 :
-CDC = avr8 : atmega16u2 : NONE : 16 : 4 :
-CDC = avr8 : atmega8u2 : NONE : 8 : 4 :
-CDC = avr8 : at90usb162 : NONE : 16 : 4 :
-CDC = avr8 : at90usb82 : NONE : 8 : 4 :
+CDC = avr8 : at90usb646 : NONE : 64 : 4 :
+CDC = avr8 : atmega32u6 : NONE : 32 : 4 :
+CDC = avr8 : atmega32u4 : NONE : 32 : 4 :
+CDC = avr8 : atmega16u4 : NONE : 16 : 4 :
+CDC = avr8 : atmega32u2 : NONE : 32 : 4 :
+CDC = avr8 : atmega16u2 : NONE : 16 : 4 :
+CDC = avr8 : atmega8u2 : NONE : 8 : 4 :
+CDC = avr8 : at90usb162 : NONE : 16 : 4 :
+CDC = avr8 : at90usb82 : NONE : 8 : 4 :
#
# ------------ DFU Bootloader -------------
DFU = avr8 : at90usb1287 : NONE : 128 : 8 :
-DFU = avr8 : at90usb647 : NONE : 64 : 4 :
+DFU = avr8 : at90usb647 : NONE : 64 : 4 :
DFU = avr8 : at90usb1286 : NONE : 128 : 8 :
-DFU = avr8 : at90usb646 : NONE : 64 : 4 :
-DFU = avr8 : atmega32u6 : NONE : 32 : 4 :
-DFU = avr8 : atmega32u4 : NONE : 32 : 4 :
-DFU = avr8 : atmega16u4 : NONE : 16 : 4 :
-DFU = avr8 : atmega32u2 : NONE : 32 : 4 :
-DFU = avr8 : atmega16u2 : NONE : 16 : 4 :
-DFU = avr8 : atmega8u2 : NONE : 8 : 4 :
-DFU = avr8 : at90usb162 : NONE : 16 : 4 :
-DFU = avr8 : at90usb82 : NONE : 8 : 4 :
+DFU = avr8 : at90usb646 : NONE : 64 : 4 :
+DFU = avr8 : atmega32u6 : NONE : 32 : 4 :
+DFU = avr8 : atmega32u4 : NONE : 32 : 4 :
+DFU = avr8 : atmega16u4 : NONE : 16 : 4 :
+DFU = avr8 : atmega32u2 : NONE : 32 : 4 :
+DFU = avr8 : atmega16u2 : NONE : 16 : 4 :
+DFU = avr8 : atmega8u2 : NONE : 8 : 4 :
+DFU = avr8 : at90usb162 : NONE : 16 : 4 :
+DFU = avr8 : at90usb82 : NONE : 8 : 4 :
#
# ------------ HID Bootloader -------------
HID = avr8 : at90usb1287 : NONE : 128 : 4 :
-HID = avr8 : at90usb647 : NONE : 64 : 4 :
+HID = avr8 : at90usb647 : NONE : 64 : 4 :
HID = avr8 : at90usb1286 : NONE : 128 : 4 :
-HID = avr8 : at90usb646 : NONE : 64 : 4 :
-HID = avr8 : atmega32u6 : NONE : 32 : 4 :
-HID = avr8 : atmega32u4 : NONE : 32 : 4 :
-HID = avr8 : atmega16u4 : NONE : 16 : 4 :
-HID = avr8 : atmega32u2 : NONE : 32 : 2 :
-HID = avr8 : atmega16u2 : NONE : 16 : 2 :
-HID = avr8 : atmega8u2 : NONE : 8 : 2 :
-HID = avr8 : at90usb162 : NONE : 16 : 2 :
-HID = avr8 : at90usb82 : NONE : 8 : 2 :
+HID = avr8 : at90usb646 : NONE : 64 : 4 :
+HID = avr8 : atmega32u6 : NONE : 32 : 4 :
+HID = avr8 : atmega32u4 : NONE : 32 : 4 :
+HID = avr8 : atmega16u4 : NONE : 16 : 4 :
+HID = avr8 : atmega32u2 : NONE : 32 : 2 :
+HID = avr8 : atmega16u2 : NONE : 16 : 2 :
+HID = avr8 : atmega8u2 : NONE : 8 : 2 :
+HID = avr8 : at90usb162 : NONE : 16 : 2 :
+HID = avr8 : at90usb82 : NONE : 8 : 2 :
# \ No newline at end of file
diff --git a/BuildTests/BootloaderTest/makefile b/BuildTests/BootloaderTest/makefile
index 7ce56c49f..5b378ec99 100644
--- a/BuildTests/BootloaderTest/makefile
+++ b/BuildTests/BootloaderTest/makefile
@@ -27,24 +27,26 @@ end:
testbootloaders:
@echo "buildtest:" > BuildMakefile
- @while read line; \
- do \
- build_cfg=`echo $$line | sed 's/ //g' | grep -v "#"`; \
- \
- if ( test -n "$$build_cfg" ); then \
+ @while read line; \
+ do \
+ build_cfg=`echo $$line | grep -v "#" | sed 's/ //g'`; \
+ \
+ if ( test -n "$$build_cfg" ); then \
build_bootloader=`echo $$build_cfg | cut -d'=' -f1`; \
- build_arch=`echo $$build_cfg | cut -d'=' -f2- | cut -d':' -f1`; \
- build_mcu=`echo $$build_cfg | cut -d'=' -f2- | cut -d':' -f2`; \
- build_board=`echo $$build_cfg | cut -d'=' -f2- | cut -d':' -f3`; \
- build_flashsize=`echo $$build_cfg | cut -d'=' -f2- | cut -d':' -f4`; \
- build_bootsize=`echo $$build_cfg | cut -d'=' -f2- | cut -d':' -f5`; \
- \
+ build_cfg=`echo $$build_cfg | cut -d'=' -f2-`; \
+ \
+ build_arch=`echo $$build_cfg | cut -d':' -f1`; \
+ build_mcu=`echo $$build_cfg | cut -d':' -f2`; \
+ build_board=`echo $$build_cfg | cut -d':' -f3`; \
+ build_flashsize=`echo $$build_cfg | cut -d':' -f4`; \
+ build_bootsize=`echo $$build_cfg | cut -d':' -f5`; \
+ \
printf "Found bootloader configuration for bootloader '%s' (FLASH: %3s KB | BOOT: %3s KB | MCU: %12s / %4s)\n" $$build_bootloader $$build_flashsize $$build_bootsize $$build_mcu $$build_arch; \
- \
+ \
printf "\t@echo Building bootloader %s - %s - FLASH: %s KB, BOOT: %s KB\n" $$build_bootloader $$build_mcu $$build_flashsize $$build_bootsize >> BuildMakefile; \
printf "\tmake -s -C $(LUFA_ROOT_PATH)/Bootloaders/%s/ clean\n" $$build_bootloader >> BuildMakefile; \
printf "\tmake -s -C $(LUFA_ROOT_PATH)/Bootloaders/%s/ MCU=%s BOARD=%s FLASH_SIZE_KB=%s BOOT_SECTION_SIZE_KB=%s elf\n\n" $$build_bootloader $$build_mcu $$build_board $$build_flashsize $$build_bootsize >> BuildMakefile; \
- fi; \
+ fi; \
done < BootloaderDeviceMap.cfg
$(MAKE) -f BuildMakefile buildtest
diff --git a/BuildTests/ModuleTest/makefile.avr8 b/BuildTests/ModuleTest/makefile.avr8
index 360b1ee8b..58fd5a47b 100644
--- a/BuildTests/ModuleTest/makefile.avr8
+++ b/BuildTests/ModuleTest/makefile.avr8
@@ -154,7 +154,7 @@ ASRC = Dummy.S
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
+OPT = 1
# Debugging format.
@@ -220,7 +220,7 @@ CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -fno-strict-aliasing
CFLAGS += -fno-split-wide-types
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
CFLAGS += -Werror
@@ -268,7 +268,7 @@ CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CPPFLAGS += -Wundef
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
@@ -281,7 +281,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+ASFLAGS = $(ADEFS)
+#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
@@ -708,7 +709,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/BuildTests/ModuleTest/makefile.uc3 b/BuildTests/ModuleTest/makefile.uc3
index 05b8d583b..9c01edf0b 100644
--- a/BuildTests/ModuleTest/makefile.uc3
+++ b/BuildTests/ModuleTest/makefile.uc3
@@ -126,7 +126,7 @@ ASRC = Dummy.S \
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
+OPT = 1
# List any extra directories to look for include files here.
@@ -186,7 +186,7 @@ CFLAGS += -funsigned-bitfields
CFLAGS += -ffunction-sections
CFLAGS += -fno-strict-aliasing
CFLAGS += -masm-addr-pseudos
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
CFLAGS += -Werror
@@ -235,7 +235,7 @@ CPPFLAGS += -fno-exceptions
CPPFLAGS += -masm-addr-pseudos
CPPFLAGS += -Wall
CPPFLAGS += -Wundef
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
@@ -249,7 +249,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst)
+ASFLAGS = $(ADEFS)
+#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Linker Options ----------------
@@ -480,7 +481,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/BuildTests/ModuleTest/makefile.xmega b/BuildTests/ModuleTest/makefile.xmega
index de27630dc..3da056646 100644
--- a/BuildTests/ModuleTest/makefile.xmega
+++ b/BuildTests/ModuleTest/makefile.xmega
@@ -143,7 +143,7 @@ ASRC = Dummy.S
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
+OPT = 1
# List any extra directories to look for include files here.
@@ -209,7 +209,7 @@ CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -fno-strict-aliasing
CFLAGS += -fno-split-wide-types
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
CFLAGS += -Werror
@@ -259,7 +259,7 @@ CPPFLAGS += -fno-strict-aliasing
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CPPFLAGS += -Wundef
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
@@ -273,7 +273,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+ASFLAGS = $(ADEFS)
+#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
@@ -700,7 +701,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/BuildTests/SingleUSBModeTest/makefile.avr8 b/BuildTests/SingleUSBModeTest/makefile.avr8
index fc0f54b66..462f44a2c 100644
--- a/BuildTests/SingleUSBModeTest/makefile.avr8
+++ b/BuildTests/SingleUSBModeTest/makefile.avr8
@@ -150,7 +150,7 @@ ASRC = Dummy.S
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
+OPT = 1
# Debugging format.
@@ -223,7 +223,7 @@ CFLAGS += -Wstrict-prototypes
#CFLAGS += -Wundef
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
@@ -250,7 +250,7 @@ CPPFLAGS += -Wundef
#CPPFLAGS += -Wstrict-prototypes
#CPPFLAGS += -Wunreachable-code
#CPPFLAGS += -Wsign-compare
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
@@ -264,7 +264,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+ASFLAGS = $(ADEFS)
+#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
@@ -691,7 +692,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/BuildTests/SingleUSBModeTest/makefile.uc3 b/BuildTests/SingleUSBModeTest/makefile.uc3
index 4bc729aed..fa13f795a 100644
--- a/BuildTests/SingleUSBModeTest/makefile.uc3
+++ b/BuildTests/SingleUSBModeTest/makefile.uc3
@@ -124,7 +124,7 @@ ASRC = Dummy.S
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
+OPT = 1
# List any extra directories to look for include files here.
@@ -186,7 +186,7 @@ CFLAGS += -fno-strict-aliasing
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
CFLAGS += -masm-addr-pseudos
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
@@ -209,7 +209,7 @@ CPPFLAGS += -fno-exceptions
CPPFLAGS += -masm-addr-pseudos
CPPFLAGS += -Wall
CPPFLAGS += -Wundef
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
@@ -223,7 +223,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+ASFLAGS = $(ADEFS)
+#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Linker Options ----------------
@@ -454,7 +455,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
diff --git a/BuildTests/SingleUSBModeTest/makefile.xmega b/BuildTests/SingleUSBModeTest/makefile.xmega
index e3ad8f401..022f7bfad 100644
--- a/BuildTests/SingleUSBModeTest/makefile.xmega
+++ b/BuildTests/SingleUSBModeTest/makefile.xmega
@@ -141,7 +141,7 @@ ASRC = Dummy.S
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
+OPT = 1
# List any extra directories to look for include files here.
@@ -208,7 +208,7 @@ CFLAGS += -fshort-enums
CFLAGS += -fno-strict-aliasing
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
@@ -232,7 +232,7 @@ CPPFLAGS += -fno-strict-aliasing
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CPPFLAGS += -Wundef
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
@@ -246,7 +246,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+ASFLAGS = $(ADEFS)
+#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
@@ -673,7 +674,7 @@ clean_list :
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
generated by cgit v1.2.3 (git 2.25.1) at 2025-07-30 16:04:06 +0000