diff options
80 files changed, 6812 insertions, 4081 deletions
diff --git a/Bootloaders/CDC/Doxygen.conf b/Bootloaders/CDC/Doxygen.conf index 50a84f3da..5e7e7d6e5 100644 --- a/Bootloaders/CDC/Doxygen.conf +++ b/Bootloaders/CDC/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1654,6 +1683,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1708,7 +1743,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1750,7 +1785,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Bootloaders/DFU/Doxygen.conf b/Bootloaders/DFU/Doxygen.conf index 38ff92388..a18aca096 100644 --- a/Bootloaders/DFU/Doxygen.conf +++ b/Bootloaders/DFU/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1654,6 +1683,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1708,7 +1743,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1750,7 +1785,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Bootloaders/HID/Doxygen.conf b/Bootloaders/HID/Doxygen.conf index c544d3be9..40666d0a5 100644 --- a/Bootloaders/HID/Doxygen.conf +++ b/Bootloaders/HID/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -770,8 +756,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -801,9 +789,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -863,6 +851,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -948,7 +950,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1217,7 +1219,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1240,6 +1242,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1265,8 +1272,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1337,7 +1344,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1360,6 +1367,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1505,6 +1519,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1655,6 +1684,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1709,7 +1744,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1751,7 +1786,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Bootloaders/MassStorage/Doxygen.conf b/Bootloaders/MassStorage/Doxygen.conf index 35a3de724..fd327d023 100644 --- a/Bootloaders/MassStorage/Doxygen.conf +++ b/Bootloaders/MassStorage/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1
+# Doxyfile 1.8.4
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
#
+# All text after a double hash (##) is considered a comment and is placed
+# in front of the TAG it is preceding .
# All text after a hash (#) is considered a comment and will be ignored.
# The format is:
# TAG = value [value, ...]
@@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
-# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian,
+# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic,
+# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
OUTPUT_LANGUAGE = English
@@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO
-# When enabled doxygen tries to link words that correspond to documented classes,
-# or namespaces to their corresponding documentation. Such a link can be
-# prevented in individual cases by by putting a % sign in front of the word or
-# globally by setting AUTOLINK_SUPPORT to NO.
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by by putting a % sign in front of the word
+# or globally by setting AUTOLINK_SUPPORT to NO.
AUTOLINK_SUPPORT = YES
@@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO
# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
-# unions with only public data fields will be shown inline in the documentation
-# of the scope in which they are defined (i.e. file, namespace, or group
-# documentation), provided this scope is documented. If set to NO (the default),
-# structs, classes, and unions are shown on a separate page (for HTML and Man
-# pages) or section (for LaTeX and RTF).
+# unions with only public data fields or simple typedef fields will be shown
+# inline in the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO (the default), structs, classes, and unions are shown on a separate
+# page (for HTML and Man pages) or section (for LaTeX and RTF).
INLINE_SIMPLE_STRUCTS = NO
@@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penalty.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will roughly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols.
-
-SYMBOL_CACHE_SIZE = 0
-
-# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
-# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
-# their name and scope. Since this can be an expensive process and often the
-# same symbol appear multiple times in the code, doxygen keeps a cache of
-# pre-resolved symbols. If the cache is too small doxygen will become slower.
-# If the cache is too large, memory is wasted. The cache size is given by this
-# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols.
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can
+# be an expensive process and often the same symbol appear multiple times in
+# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too
+# small doxygen will become slower. If the cache is too large, memory is wasted.
+# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid
+# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536
+# symbols.
LOOKUP_CACHE_SIZE = 0
@@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
# documentation are documented, even if no documentation was available.
# Private class members and static file members will be hidden unless
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES
EXTRACT_ALL = YES
@@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
# input file. Doxygen will then use the output that the filter program writes
# to standard output.
-# If FILTER_PATTERNS is specified, this tag will be
-# ignored.
+# If FILTER_PATTERNS is specified, this tag will be ignored.
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
INPUT_FILTER =
@@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS =
# If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page (index.html).
-# This can be useful if you have a project on for instance GitHub and want reuse
-# the introduction page also for the doxygen output.
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want reuse the introduction page also for the doxygen output.
USE_MDFILE_AS_MAINPAGE =
@@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO
+# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser
+# for more acurate parsing at the cost of reduced performance. This can be
+# particularly helpful with template rich C++ code for which doxygen's built-in
+# parser lacks the necessairy type information.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified at INPUT and INCLUDE_PATH.
+
+CLANG_OPTIONS =
+
#---------------------------------------------------------------------------
# configuration options related to the alphabetical class index
#---------------------------------------------------------------------------
@@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the HTML output directory. Note
# that these files will be copied to the base HTML output directory. Use the
-# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
# files. In the HTML_STYLESHEET file, use the file name only. Also note that
# the files will be copied as-is; there are no commands or markers available.
@@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO
# When MathJax is enabled you can set the default output format to be used for
-# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and
+# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and
# SVG. The default value is HTML-CSS, which is slower, but has the best
# compatibility.
@@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS =
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript
+# pieces of code that will be used on startup of the MathJax code.
+
+MATHJAX_CODEFILE =
+
# When the SEARCHENGINE tag is enabled doxygen will generate a search box
# for the HTML output. The underlying search engine uses javascript
# and DHTML and should work on any modern browser. Note that when using
@@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an
# external search engine pointed to by the SEARCHENGINE_URL option to obtain
# the search results. Doxygen ships with an example indexer (doxyindexer) and
-# search engine (doxysearch.cgi) which are based on the open source search engine
-# library Xapian. See the manual for configuration details.
+# search engine (doxysearch.cgi) which are based on the open source search
+# engine library Xapian. See the manual for configuration details.
EXTERNAL_SEARCH = NO
@@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used
# by the printer. Possible values are: a4, letter, legal and
-# executive. If left blank a4wide will be used.
+# executive. If left blank a4 will be used.
PAPER_TYPE = a4wide
@@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER =
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images
+# or other source files which should be copied to the LaTeX output directory.
+# Note that the files will be copied as-is; there are no commands or markers
+# available.
+
+LATEX_EXTRA_FILES =
+
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
# is prepared for conversion to pdf (using ps2pdf). The pdf file will
# contain links (just like the HTML output) instead of page references
@@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES
#---------------------------------------------------------------------------
+# configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files
+# that can be used to generate PDF.
+
+GENERATE_DOCBOOK = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it. If left blank docbook will be used as the default path.
+
+DOCBOOK_OUTPUT = docbook
+
+#---------------------------------------------------------------------------
# configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------
@@ -1654,6 +1683,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES
+# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed
+# in the related pages index. If set to NO, only the current project's
+# pages will be listed.
+
+EXTERNAL_PAGES = YES
+
# The PERL_PATH should be the absolute path and name of the perl script
# interpreter (i.e. the result of `which perl').
@@ -1708,7 +1743,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
# directory containing the font.
-DOT_FONTNAME = FreeSans
+DOT_FONTNAME =
# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
# The default size is 10pt.
@@ -1750,7 +1785,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the
# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
# threshold limits the number of items for each type to make the size more
-# managable. Set this to 0 for no limit. Note that the threshold may be
+# manageable. Set this to 0 for no limit. Note that the threshold may be
# exceeded by 50% before the limit is enforced.
UML_LIMIT_NUM_FIELDS = 10
diff --git a/Bootloaders/Printer/Doxygen.conf b/Bootloaders/Printer/Doxygen.conf index 8d9a8071d..80fbbb47e 100644 --- a/Bootloaders/Printer/Doxygen.conf +++ b/Bootloaders/Printer/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1
+# Doxyfile 1.8.4
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
#
+# All text after a double hash (##) is considered a comment and is placed
+# in front of the TAG it is preceding .
# All text after a hash (#) is considered a comment and will be ignored.
# The format is:
# TAG = value [value, ...]
@@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
-# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian,
+# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic,
+# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
OUTPUT_LANGUAGE = English
@@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO
-# When enabled doxygen tries to link words that correspond to documented classes,
-# or namespaces to their corresponding documentation. Such a link can be
-# prevented in individual cases by by putting a % sign in front of the word or
-# globally by setting AUTOLINK_SUPPORT to NO.
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by by putting a % sign in front of the word
+# or globally by setting AUTOLINK_SUPPORT to NO.
AUTOLINK_SUPPORT = YES
@@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO
# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
-# unions with only public data fields will be shown inline in the documentation
-# of the scope in which they are defined (i.e. file, namespace, or group
-# documentation), provided this scope is documented. If set to NO (the default),
-# structs, classes, and unions are shown on a separate page (for HTML and Man
-# pages) or section (for LaTeX and RTF).
+# unions with only public data fields or simple typedef fields will be shown
+# inline in the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO (the default), structs, classes, and unions are shown on a separate
+# page (for HTML and Man pages) or section (for LaTeX and RTF).
INLINE_SIMPLE_STRUCTS = NO
@@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penalty.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will roughly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols.
-
-SYMBOL_CACHE_SIZE = 0
-
-# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
-# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
-# their name and scope. Since this can be an expensive process and often the
-# same symbol appear multiple times in the code, doxygen keeps a cache of
-# pre-resolved symbols. If the cache is too small doxygen will become slower.
-# If the cache is too large, memory is wasted. The cache size is given by this
-# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols.
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can
+# be an expensive process and often the same symbol appear multiple times in
+# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too
+# small doxygen will become slower. If the cache is too large, memory is wasted.
+# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid
+# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536
+# symbols.
LOOKUP_CACHE_SIZE = 0
@@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
# documentation are documented, even if no documentation was available.
# Private class members and static file members will be hidden unless
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES
EXTRACT_ALL = YES
@@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
# input file. Doxygen will then use the output that the filter program writes
# to standard output.
-# If FILTER_PATTERNS is specified, this tag will be
-# ignored.
+# If FILTER_PATTERNS is specified, this tag will be ignored.
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
INPUT_FILTER =
@@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS =
# If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page (index.html).
-# This can be useful if you have a project on for instance GitHub and want reuse
-# the introduction page also for the doxygen output.
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want reuse the introduction page also for the doxygen output.
USE_MDFILE_AS_MAINPAGE =
@@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO
+# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser
+# for more acurate parsing at the cost of reduced performance. This can be
+# particularly helpful with template rich C++ code for which doxygen's built-in
+# parser lacks the necessairy type information.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified at INPUT and INCLUDE_PATH.
+
+CLANG_OPTIONS =
+
#---------------------------------------------------------------------------
# configuration options related to the alphabetical class index
#---------------------------------------------------------------------------
@@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the HTML output directory. Note
# that these files will be copied to the base HTML output directory. Use the
-# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
# files. In the HTML_STYLESHEET file, use the file name only. Also note that
# the files will be copied as-is; there are no commands or markers available.
@@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO
# When MathJax is enabled you can set the default output format to be used for
-# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and
+# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and
# SVG. The default value is HTML-CSS, which is slower, but has the best
# compatibility.
@@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS =
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript
+# pieces of code that will be used on startup of the MathJax code.
+
+MATHJAX_CODEFILE =
+
# When the SEARCHENGINE tag is enabled doxygen will generate a search box
# for the HTML output. The underlying search engine uses javascript
# and DHTML and should work on any modern browser. Note that when using
@@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an
# external search engine pointed to by the SEARCHENGINE_URL option to obtain
# the search results. Doxygen ships with an example indexer (doxyindexer) and
-# search engine (doxysearch.cgi) which are based on the open source search engine
-# library Xapian. See the manual for configuration details.
+# search engine (doxysearch.cgi) which are based on the open source search
+# engine library Xapian. See the manual for configuration details.
EXTERNAL_SEARCH = NO
@@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used
# by the printer. Possible values are: a4, letter, legal and
-# executive. If left blank a4wide will be used.
+# executive. If left blank a4 will be used.
PAPER_TYPE = a4wide
@@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER =
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images
+# or other source files which should be copied to the LaTeX output directory.
+# Note that the files will be copied as-is; there are no commands or markers
+# available.
+
+LATEX_EXTRA_FILES =
+
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
# is prepared for conversion to pdf (using ps2pdf). The pdf file will
# contain links (just like the HTML output) instead of page references
@@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES
#---------------------------------------------------------------------------
+# configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files
+# that can be used to generate PDF.
+
+GENERATE_DOCBOOK = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it. If left blank docbook will be used as the default path.
+
+DOCBOOK_OUTPUT = docbook
+
+#---------------------------------------------------------------------------
# configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------
@@ -1654,6 +1683,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES
+# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed
+# in the related pages index. If set to NO, only the current project's
+# pages will be listed.
+
+EXTERNAL_PAGES = YES
+
# The PERL_PATH should be the absolute path and name of the perl script
# interpreter (i.e. the result of `which perl').
@@ -1708,7 +1743,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
# directory containing the font.
-DOT_FONTNAME = FreeSans
+DOT_FONTNAME =
# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
# The default size is 10pt.
@@ -1750,7 +1785,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the
# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
# threshold limits the number of items for each type to make the size more
-# managable. Set this to 0 for no limit. Note that the threshold may be
+# manageable. Set this to 0 for no limit. Note that the threshold may be
# exceeded by 50% before the limit is enforced.
UML_LIMIT_NUM_FIELDS = 10
diff --git a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf index 4a4f249b2..0dea796b7 100644 --- a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf index b6e0ba91e..e9d33d5cb 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf index a53cde289..329ffe854 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf index 2056e2cd3..8983b5700 100644 --- a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf +++ b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/Joystick/Doxygen.conf b/Demos/Device/ClassDriver/Joystick/Doxygen.conf index f53085878..dd9003444 100644 --- a/Demos/Device/ClassDriver/Joystick/Doxygen.conf +++ b/Demos/Device/ClassDriver/Joystick/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf index f41497ca4..56683d7b5 100644 --- a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf index 7e8f80c07..5766ee6da 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf index bf84eb8f2..02f9fd4ce 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/MIDI/Doxygen.conf b/Demos/Device/ClassDriver/MIDI/Doxygen.conf index 1f06cbf72..f111db67c 100644 --- a/Demos/Device/ClassDriver/MIDI/Doxygen.conf +++ b/Demos/Device/ClassDriver/MIDI/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf index c0f310dbe..d6652156c 100644 --- a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf index 05eaa64b3..2d5b43f6a 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/Mouse/Doxygen.conf b/Demos/Device/ClassDriver/Mouse/Doxygen.conf index 4da744f92..8f0c63d16 100644 --- a/Demos/Device/ClassDriver/Mouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/Mouse/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf index 486856897..578b4d29b 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf +++ b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf index db4a65c32..188fe5a5d 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf index adb5d656a..36d293e5c 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf index 2e2459a63..8e57dbd48 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/LowLevel/AudioInput/Doxygen.conf b/Demos/Device/LowLevel/AudioInput/Doxygen.conf index 4a4f249b2..0dea796b7 100644 --- a/Demos/Device/LowLevel/AudioInput/Doxygen.conf +++ b/Demos/Device/LowLevel/AudioInput/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/LowLevel/AudioOutput/Doxygen.conf b/Demos/Device/LowLevel/AudioOutput/Doxygen.conf index b6e0ba91e..e9d33d5cb 100644 --- a/Demos/Device/LowLevel/AudioOutput/Doxygen.conf +++ b/Demos/Device/LowLevel/AudioOutput/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf b/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf index a53cde289..329ffe854 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf +++ b/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/LowLevel/GenericHID/Doxygen.conf b/Demos/Device/LowLevel/GenericHID/Doxygen.conf index 2056e2cd3..8983b5700 100644 --- a/Demos/Device/LowLevel/GenericHID/Doxygen.conf +++ b/Demos/Device/LowLevel/GenericHID/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/LowLevel/Joystick/Doxygen.conf b/Demos/Device/LowLevel/Joystick/Doxygen.conf index f53085878..dd9003444 100644 --- a/Demos/Device/LowLevel/Joystick/Doxygen.conf +++ b/Demos/Device/LowLevel/Joystick/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/LowLevel/Keyboard/Doxygen.conf b/Demos/Device/LowLevel/Keyboard/Doxygen.conf index f41497ca4..56683d7b5 100644 --- a/Demos/Device/LowLevel/Keyboard/Doxygen.conf +++ b/Demos/Device/LowLevel/Keyboard/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf b/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf index 7e8f80c07..5766ee6da 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf +++ b/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/LowLevel/MIDI/Doxygen.conf b/Demos/Device/LowLevel/MIDI/Doxygen.conf index 1f06cbf72..f111db67c 100644 --- a/Demos/Device/LowLevel/MIDI/Doxygen.conf +++ b/Demos/Device/LowLevel/MIDI/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/LowLevel/MassStorage/Doxygen.conf b/Demos/Device/LowLevel/MassStorage/Doxygen.conf index c0f310dbe..d6652156c 100644 --- a/Demos/Device/LowLevel/MassStorage/Doxygen.conf +++ b/Demos/Device/LowLevel/MassStorage/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/LowLevel/Mouse/Doxygen.conf b/Demos/Device/LowLevel/Mouse/Doxygen.conf index 4da744f92..8f0c63d16 100644 --- a/Demos/Device/LowLevel/Mouse/Doxygen.conf +++ b/Demos/Device/LowLevel/Mouse/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf b/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf index 486856897..578b4d29b 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf +++ b/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf b/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf index db4a65c32..188fe5a5d 100644 --- a/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf +++ b/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf b/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf index a69eeccd9..c3d1a3367 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf b/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf index a5bbfc03f..2d538f866 100644 --- a/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf b/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf index 5cc2dbfcc..ff426c48e 100644 --- a/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf b/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf index c545b992b..9f270f3ec 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf index 3f40eaa8b..9657cbfab 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf b/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf index 789e912b9..779c18373 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf index 0fbd53a70..25c1733e1 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf b/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf index da82f7a1c..c5388b679 100644 --- a/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf b/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf index 857dd83f4..a49874f7a 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/MouseHost/Doxygen.conf b/Demos/Host/ClassDriver/MouseHost/Doxygen.conf index 2a4190344..f6fc1551e 100644 --- a/Demos/Host/ClassDriver/MouseHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MouseHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf index 54e17f699..4f9ac267f 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf b/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf index 9f6402895..c3ea5dea3 100644 --- a/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf b/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf index 213f0c343..7fa204d0e 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf b/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf index f5851406f..738bc0fc4 100644 --- a/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf b/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf index f595400e7..2a30373de 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf b/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf index a5bbfc03f..2d538f866 100644 --- a/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf index 5cc2dbfcc..ff426c48e 100644 --- a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf index c545b992b..9f270f3ec 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf b/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf index 01839ab19..5bb5aec3a 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf +++ b/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf index 3f40eaa8b..9657cbfab 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf b/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf index 789e912b9..779c18373 100644 --- a/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf +++ b/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf index 0fbd53a70..25c1733e1 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/MIDIHost/Doxygen.conf b/Demos/Host/LowLevel/MIDIHost/Doxygen.conf index da82f7a1c..c5388b679 100644 --- a/Demos/Host/LowLevel/MIDIHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MIDIHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf b/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf index 857dd83f4..a49874f7a 100644 --- a/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/MouseHost/Doxygen.conf b/Demos/Host/LowLevel/MouseHost/Doxygen.conf index 2a4190344..f6fc1551e 100644 --- a/Demos/Host/LowLevel/MouseHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MouseHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf index 54e17f699..4f9ac267f 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/PrinterHost/Doxygen.conf b/Demos/Host/LowLevel/PrinterHost/Doxygen.conf index 9f6402895..c3ea5dea3 100644 --- a/Demos/Host/LowLevel/PrinterHost/Doxygen.conf +++ b/Demos/Host/LowLevel/PrinterHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf b/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf index 1e39e784a..8bb969a8b 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf +++ b/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/StillImageHost/Doxygen.conf b/Demos/Host/LowLevel/StillImageHost/Doxygen.conf index f5851406f..738bc0fc4 100644 --- a/Demos/Host/LowLevel/StillImageHost/Doxygen.conf +++ b/Demos/Host/LowLevel/StillImageHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf b/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf index f595400e7..2a30373de 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf +++ b/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/LUFA/Doxygen.conf b/LUFA/Doxygen.conf index af74d44d3..087fece53 100644 --- a/LUFA/Doxygen.conf +++ b/LUFA/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = YES -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -771,8 +757,10 @@ IMAGE_PATH = ./ # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -802,9 +790,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -864,6 +852,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -949,7 +951,7 @@ HTML_EXTRA_STYLESHEET = ./DoxygenPages/Style/Style.css # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1218,7 +1220,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1241,6 +1243,11 @@ MATHJAX_RELPATH = http://www.mathjax.org/mathjax MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1266,8 +1273,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1338,7 +1345,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1361,6 +1368,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1506,6 +1520,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1657,6 +1686,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1711,7 +1746,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1753,7 +1788,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/LUFA/DoxygenPages/CompileTimeTokens.txt b/LUFA/DoxygenPages/CompileTimeTokens.txt index 79c4cd4f1..f58eb5c39 100644 --- a/LUFA/DoxygenPages/CompileTimeTokens.txt +++ b/LUFA/DoxygenPages/CompileTimeTokens.txt @@ -17,207 +17,207 @@ * \section Sec_SummaryNonUSBTokens Non USB Related Tokens * This section describes compile tokens which affect non-USB sections of the LUFA library. * - * - <b>DISABLE_TERMINAL_CODES</b> - (\ref Group_Terminal) - <i>All Architectures</i> \n - * If an application contains ANSI terminal control codes listed in TerminalCodes.h, it might be desired to remove them - * at compile time for use with a terminal which is non-ANSI control code aware, without modifying the source code. If - * this token is defined, all ANSI control codes in the application code from the TerminalCodes.h header are removed from - * the source code at compile time. + * \li <b>DISABLE_TERMINAL_CODES</b> - (\ref Group_Terminal) - <i>All Architectures</i> \n + * If an application contains ANSI terminal control codes listed in TerminalCodes.h, it might be desired to remove them + * at compile time for use with a terminal which is non-ANSI control code aware, without modifying the source code. If + * this token is defined, all ANSI control codes in the application code from the TerminalCodes.h header are removed from + * the source code at compile time. * * * \section Sec_SummaryUSBClassTokens USB Class Driver Related Tokens * This section describes compile tokens which affect USB class-specific drivers in the LUFA library. * - * - <b>HID_HOST_BOOT_PROTOCOL_ONLY</b> - (\ref Group_USBClassHIDHost) - <i>All Architectures</i> \n - * By default, the USB HID Host class driver is designed to work with HID devices using either the Boot or Report HID - * communication protocols. On devices where the Report protocol is not used (i.e. in applications where only basic - * Mouse or Keyboard operation is desired, using boot compatible devices), the code responsible for the Report protocol - * mode can be removed to save space in the compiled application by defining this token. When defined, it is still necessary - * to explicitly put the attached device into Boot protocol mode via a call to \ref HID_Host_SetBootProtocol(). - * - * - <b>HID_STATETABLE_STACK_DEPTH</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n - * HID reports may contain PUSH and POP elements, to store and retrieve the current HID state table onto a stack. This - * allows for reports to save the state table before modifying it slightly for a data item, and then restore the previous - * state table in a compact manner. This token may be defined to a non-zero 8-bit value to give the maximum depth of the state - * table stack. If not defined, this defaults to the value indicated in the HID.h file documentation. - * - * - <b>HID_USAGE_STACK_DEPTH</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n - * HID reports generally contain many USAGE elements, which are assigned to INPUT, OUTPUT and FEATURE items in succession - * when multiple items are defined at once (via REPORT COUNT elements). This allows for several items to be defined with - * different usages in a compact manner. This token may be defined to a non-zero 8-bit value to set the maximum depth of the - * usage stack, indicating the maximum number of USAGE items which can be stored temporarily until the next INPUT, OUTPUT - * and FEATURE item. If not defined, this defaults to the value indicated in the HID.h file documentation. - * - * - <b>HID_MAX_COLLECTIONS</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n - * HID reports generally contain several COLLECTION elements, used to group related data items together. Collection information - * is stored separately in the processed usage structure (and referred to by the data elements in the structure) to save space. - * This token may be defined to a non-zero 8-bit value to set the maximum number of COLLECTION items which can be processed by the - * parser into the resultant processed report structure. If not defined, this defaults to the value indicated in the HID.h file - * documentation. - * - * - <b>HID_MAX_REPORTITEMS</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n - * All HID reports contain one or more INPUT, OUTPUT and/or FEATURE items describing the data which can be sent to and from the HID - * device. Each item has associated usages, bit offsets in the item reports and other associated data indicating the manner in which - * the report data should be interpreted by the host. This token may be defined to a non-zero 8-bit value to set the maximum number of - * data elements which can be stored in the processed HID report structure, including INPUT, OUTPUT and (if enabled) FEATURE items. - * If a item has a multiple count (i.e. a REPORT COUNT of more than 1), each item in the report count is placed separately in the - * processed HID report table. If not defined, this defaults to the value indicated in the HID.h file documentation. - * - * - <b>HID_MAX_REPORT_IDS</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n - * HID reports may contain several report IDs, to logically distinguish grouped device data from one another - for example, a combination - * keyboard and mouse might use report IDs to separate the keyboard reports from the mouse reports. In order to determine the size of each - * report, and thus know how many bytes must be read or written, the size of each report (IN, OUT and FEATURE) must be calculated and - * stored. This token may be defined to a non-zero 8-bit value to set the maximum number of report IDs in a device which can be processed - * and their sizes calculated/stored into the resultant processed report structure. If not defined, this defaults to the value indicated in - * the HID.h file documentation. - * - * - <b>NO_CLASS_DRIVER_AUTOFLUSH</b> - (\ref Group_USBClassDrivers) - <i>All Architectures</i> \n - * Many of the device and host mode class drivers automatically flush any data waiting to be written to an interface, when the corresponding - * USB management task is executed. This is usually desirable to ensure that any queued data is sent as soon as possible once and new data is - * constructed in the main program loop. However, if flushing is to be controlled manually by the user application via the *_Flush() commands, - * the compile time token may be defined in the application's makefile to disable automatic flushing during calls to the class driver USB - * management tasks. + * \li <b>HID_HOST_BOOT_PROTOCOL_ONLY</b> - (\ref Group_USBClassHIDHost) - <i>All Architectures</i> \n + * By default, the USB HID Host class driver is designed to work with HID devices using either the Boot or Report HID + * communication protocols. On devices where the Report protocol is not used (i.e. in applications where only basic + * Mouse or Keyboard operation is desired, using boot compatible devices), the code responsible for the Report protocol + * mode can be removed to save space in the compiled application by defining this token. When defined, it is still necessary + * to explicitly put the attached device into Boot protocol mode via a call to \ref HID_Host_SetBootProtocol(). + * + * \li <b>HID_STATETABLE_STACK_DEPTH</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n + * HID reports may contain PUSH and POP elements, to store and retrieve the current HID state table onto a stack. This + * allows for reports to save the state table before modifying it slightly for a data item, and then restore the previous + * state table in a compact manner. This token may be defined to a non-zero 8-bit value to give the maximum depth of the state + * table stack. If not defined, this defaults to the value indicated in the HID.h file documentation. + * + * \li <b>HID_USAGE_STACK_DEPTH</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n + * HID reports generally contain many USAGE elements, which are assigned to INPUT, OUTPUT and FEATURE items in succession + * when multiple items are defined at once (via REPORT COUNT elements). This allows for several items to be defined with + * different usages in a compact manner. This token may be defined to a non-zero 8-bit value to set the maximum depth of the + * usage stack, indicating the maximum number of USAGE items which can be stored temporarily until the next INPUT, OUTPUT + * and FEATURE item. If not defined, this defaults to the value indicated in the HID.h file documentation. + * + * \li <b>HID_MAX_COLLECTIONS</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n + * HID reports generally contain several COLLECTION elements, used to group related data items together. Collection information + * is stored separately in the processed usage structure (and referred to by the data elements in the structure) to save space. + * This token may be defined to a non-zero 8-bit value to set the maximum number of COLLECTION items which can be processed by the + * parser into the resultant processed report structure. If not defined, this defaults to the value indicated in the HID.h file + * documentation. + * + * \li <b>HID_MAX_REPORTITEMS</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n + * All HID reports contain one or more INPUT, OUTPUT and/or FEATURE items describing the data which can be sent to and from the HID + * device. Each item has associated usages, bit offsets in the item reports and other associated data indicating the manner in which + * the report data should be interpreted by the host. This token may be defined to a non-zero 8-bit value to set the maximum number of + * data elements which can be stored in the processed HID report structure, including INPUT, OUTPUT and (if enabled) FEATURE items. + * If a item has a multiple count (i.e. a REPORT COUNT of more than 1), each item in the report count is placed separately in the + * processed HID report table. If not defined, this defaults to the value indicated in the HID.h file documentation. + * + * \li <b>HID_MAX_REPORT_IDS</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n + * HID reports may contain several report IDs, to logically distinguish grouped device data from one another - for example, a combination + * keyboard and mouse might use report IDs to separate the keyboard reports from the mouse reports. In order to determine the size of each + * report, and thus know how many bytes must be read or written, the size of each report (IN, OUT and FEATURE) must be calculated and + * stored. This token may be defined to a non-zero 8-bit value to set the maximum number of report IDs in a device which can be processed + * and their sizes calculated/stored into the resultant processed report structure. If not defined, this defaults to the value indicated in + * the HID.h file documentation. + * + * \li <b>NO_CLASS_DRIVER_AUTOFLUSH</b> - (\ref Group_USBClassDrivers) - <i>All Architectures</i> \n + * Many of the device and host mode class drivers automatically flush any data waiting to be written to an interface, when the corresponding + * USB management task is executed. This is usually desirable to ensure that any queued data is sent as soon as possible once and new data is + * constructed in the main program loop. However, if flushing is to be controlled manually by the user application via the *_Flush() commands, + * the compile time token may be defined in the application's makefile to disable automatic flushing during calls to the class driver USB + * management tasks. * * * \section Sec_SummaryUSBTokens General USB Driver Related Tokens * This section describes compile tokens which affect USB driver stack as a whole in the LUFA library. * - * - <b>ORDERED_EP_CONFIG</b> - (\ref Group_EndpointManagement , \ref Group_PipeManagement) - <i>AVR8, UC3</i> \n - * The USB AVRs do not allow for Endpoints and Pipes to be configured out of order; they <i>must</i> be configured in an ascending order to - * prevent data corruption issues. However, by default LUFA employs a workaround to allow for unordered Endpoint/Pipe initialization. This compile - * time token may be used to restrict the initialization order to ascending indexes only in exchange for a smaller compiled binary size. Use - * caution when applied to applications using the library USB Class drivers; the user application must ensure that all endpoints and pipes are - * allocated sequentially. - * - * - <b>USE_STATIC_OPTIONS</b>=<i>x</i> - (\ref Group_USBManagement) - <i>All Architectures</i> \n - * By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad - * voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options - * mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing - * the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an - * Options parameter. - * - * - <b>USB_DEVICE_ONLY</b> - (\ref Group_USBManagement) - <i>All Architectures</i> \n - * For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the - * mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to - * save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevant on smaller USB AVRs which - * do not support host mode. - * - * - <b>USB_HOST_ONLY</b> - (\ref Group_USBManagement) - <i>All Architectures</i> \n - * Same as USB_DEVICE_ONLY, except the library is fixed to USB host mode rather than USB device mode. Not available on some USB AVR models. - * - * - <b>USB_STREAM_TIMEOUT_MS</b>=<i>x</i> - (\ref Group_USBManagement) - <i>All Architectures</i> \n - * When endpoint and/or pipe stream functions are used, by default there is a timeout between each transfer which the connected device or host - * must satisfy, or the stream function aborts the remaining data transfer. This token may be defined to a non-zero 16-bit value to set the timeout - * period for stream transfers, specified in milliseconds. If not defined, the default value specified in LowLevel.h is used instead. - * - * - <b>NO_LIMITED_CONTROLLER_CONNECT</b> - (\ref Group_Events) - <i>AVR8 Only</i> \n - * On the smaller USB AVRs, the USB controller lacks VBUS events to determine the physical connection state of the USB bus to a host. In lieu of - * VBUS events, the library attempts to determine the connection state via the bus suspension and wake up events instead. This however may be - * slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is - * required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the USB_DeviceState global - * can be accurately set and the \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events manually raised by the RAISE_EVENT macro. - * When defined, this token disables the library's auto-detection of the connection state by the aforementioned suspension and wake up events. - * - * - <b>NO_SOF_EVENTS</b> - (\ref Group_Events) - <i>All Architectures</i> \n - * By default, there exists a LUFA application event for the start of each USB frame while the USB bus is not suspended in either host or device mode. - * This event can be selectively enabled or disabled by calling the appropriate device or host mode function. When this compile time token is defined, - * the ability to receive USB Start of Frame events via the \ref EVENT_USB_Device_StartOfFrame() or \ref EVENT_USB_Host_StartOfFrame() events is removed, - * reducing the compiled program's binary size. + * \li <b>ORDERED_EP_CONFIG</b> - (\ref Group_EndpointManagement , \ref Group_PipeManagement) - <i>AVR8, UC3</i> \n + * The USB AVRs do not allow for Endpoints and Pipes to be configured out of order; they <i>must</i> be configured in an ascending order to + * prevent data corruption issues. However, by default LUFA employs a workaround to allow for unordered Endpoint/Pipe initialization. This compile + * time token may be used to restrict the initialization order to ascending indexes only in exchange for a smaller compiled binary size. Use + * caution when applied to applications using the library USB Class drivers; the user application must ensure that all endpoints and pipes are + * allocated sequentially. + * + * \li <b>USE_STATIC_OPTIONS</b>=<i>x</i> - (\ref Group_USBManagement) - <i>All Architectures</i> \n + * By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad + * voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options + * mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing + * the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an + * Options parameter. + * + * \li <b>USB_DEVICE_ONLY</b> - (\ref Group_USBManagement) - <i>All Architectures</i> \n + * For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the + * mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to + * save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevant on smaller USB AVRs which + * do not support host mode. + * + * \li <b>USB_HOST_ONLY</b> - (\ref Group_USBManagement) - <i>All Architectures</i> \n + * Same as USB_DEVICE_ONLY, except the library is fixed to USB host mode rather than USB device mode. Not available on some USB AVR models. + * + * \li <b>USB_STREAM_TIMEOUT_MS</b>=<i>x</i> - (\ref Group_USBManagement) - <i>All Architectures</i> \n + * When endpoint and/or pipe stream functions are used, by default there is a timeout between each transfer which the connected device or host + * must satisfy, or the stream function aborts the remaining data transfer. This token may be defined to a non-zero 16-bit value to set the timeout + * period for stream transfers, specified in milliseconds. If not defined, the default value specified in LowLevel.h is used instead. + * + * \li <b>NO_LIMITED_CONTROLLER_CONNECT</b> - (\ref Group_Events) - <i>AVR8 Only</i> \n + * On the smaller USB AVRs, the USB controller lacks VBUS events to determine the physical connection state of the USB bus to a host. In lieu of + * VBUS events, the library attempts to determine the connection state via the bus suspension and wake up events instead. This however may be + * slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is + * required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the USB_DeviceState global + * can be accurately set and the \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events manually raised by the RAISE_EVENT macro. + * When defined, this token disables the library's auto-detection of the connection state by the aforementioned suspension and wake up events. + * + * \li <b>NO_SOF_EVENTS</b> - (\ref Group_Events) - <i>All Architectures</i> \n + * By default, there exists a LUFA application event for the start of each USB frame while the USB bus is not suspended in either host or device mode. + * This event can be selectively enabled or disabled by calling the appropriate device or host mode function. When this compile time token is defined, + * the ability to receive USB Start of Frame events via the \ref EVENT_USB_Device_StartOfFrame() or \ref EVENT_USB_Host_StartOfFrame() events is removed, + * reducing the compiled program's binary size. * * * \section Sec_SummaryUSBDeviceTokens USB Device Mode Driver Related Tokens * This section describes compile tokens which affect USB driver stack of the LUFA library when used in Device mode. * - * - <b>USE_RAM_DESCRIPTORS</b> - (\ref Group_StdDescriptors) - <i>AVR8 Only</i> \n - * Define this token to indicate to the USB driver that all device descriptors are stored in RAM, rather than being located in any one - * of the AVR's memory spaces. RAM descriptors may be desirable in applications where the descriptors need to be modified at runtime. - * - * - <b>USE_FLASH_DESCRIPTORS</b> - (\ref Group_StdDescriptors) - <i>AVR8 Only</i> \n - * Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's FLASH memory rather than RAM. - * - * - <b>USE_EEPROM_DESCRIPTORS</b> - (\ref Group_StdDescriptors) - <i>AVR8 Only</i> \n - * Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's EEPROM memory rather than RAM. - * - * - <b>NO_INTERNAL_SERIAL</b> - (\ref Group_StdDescriptors) - <i>All Architectures</i> \n - * Some AVR models contain a unique serial number which can be used as the device serial number, while in device mode. This allows - * the host to uniquely identify the device regardless of if it is moved between USB ports on the same computer, allowing allocated - * resources (such as drivers, COM Port number allocations) to be preserved. This is not needed in many apps, and so the code that - * performs this task can be disabled by defining this option and passing it to the compiler via the -D switch. - * - * - <b>FIXED_CONTROL_ENDPOINT_SIZE</b>=<i>x</i> - (\ref Group_EndpointManagement) - <i>All Architectures</i> \n - * By default, the library determines the size of the control endpoint (when in device mode) by reading the device descriptor. - * Normally this reduces the amount of configuration required for the library, allows the value to change dynamically (if - * descriptors are stored in EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this token can be - * defined to a non-zero value instead to give the size in bytes of the control endpoint, to reduce the size of the compiled - * binary. - * - * - <b>DEVICE_STATE_AS_GPIOR</b> - (\ref Group_Device) - <i>AVR8 Only</i> \n - * One of the most frequently used global variables in the stack is the USB_DeviceState global, which indicates the current state of - * the Device State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token - * may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR - * reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except - * implicitly via the library APIs. - * - * - <b>FIXED_NUM_CONFIGURATIONS</b>=<i>x</i> - (\ref Group_Device) - <i>All Architectures</i> \n - * By default, the library determines the number of configurations a USB device supports by reading the device descriptor. This reduces - * the amount of configuration required to set up the library, and allows the value to change dynamically (if descriptors are stored in - * EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this value may be fixed via this token in the project - * makefile to reduce the compiled size of the binary at the expense of flexibility. - * - * - <b>CONTROL_ONLY_DEVICE</b> - (\ref Group_Device) - <i>All Architectures</i> \n - * In some limited USB device applications, there are no device endpoints other than the control endpoint; i.e. all device communication - * is through control endpoint requests. Defining this token will remove several features related to the selection and control of device - * endpoints internally, saving space. Generally, this is usually only useful in (some) bootloaders and is best avoided. - * - * - <b>MAX_ENDPOINT_INDEX</b> - (\ref Group_Device) - <i>XMEGA Only</i> \n - * Defining this value to the highest index (not address - this excludes the direction flag) endpoint within the device will restrict the - * number of FIFOs created internally for the endpoint buffers, reducing the total RAM usage. - * - * - <b>INTERRUPT_CONTROL_ENDPOINT</b> - (\ref Group_USBManagement) - <i>All Architectures</i> \n - * Some applications prefer to not call the USB_USBTask() management task regularly while in device mode, as it can complicate code significantly. - * Instead, when device mode is used this token can be passed to the library via the -D switch to allow the library to manage the USB control - * endpoint entirely via USB controller interrupts asynchronously to the user application. When defined, USB_USBTask() does not need to be called - * when in USB device mode. - * - * - <b>NO_DEVICE_REMOTE_WAKEUP</b> - (\ref Group_Device) - <i>All Architectures</i> \n - * Many devices do not require the use of the Remote Wakeup features of USB, used to wake up the USB host when suspended. On these devices, - * the code required to manage device Remote Wakeup can be disabled by defining this token and passing it to the library via the -D switch. - * - * - <b>NO_DEVICE_SELF_POWER</b> - (\ref Group_Device) - <i>All Architectures</i> \n - * USB devices may be bus powered, self powered, or a combination of both. When a device can be both bus powered and self powered, the host may - * query the device to determine the current power source, via \ref USB_Device_CurrentlySelfPowered. For solely bus powered devices, this global - * and the code required to manage it may be disabled by passing this token to the library via the -D switch. + * \li <b>USE_RAM_DESCRIPTORS</b> - (\ref Group_StdDescriptors) - <i>AVR8 Only</i> \n + * Define this token to indicate to the USB driver that all device descriptors are stored in RAM, rather than being located in any one + * of the AVR's memory spaces. RAM descriptors may be desirable in applications where the descriptors need to be modified at runtime. + * + * \li <b>USE_FLASH_DESCRIPTORS</b> - (\ref Group_StdDescriptors) - <i>AVR8 Only</i> \n + * Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's FLASH memory rather than RAM. + * + * \li <b>USE_EEPROM_DESCRIPTORS</b> - (\ref Group_StdDescriptors) - <i>AVR8 Only</i> \n + * Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's EEPROM memory rather than RAM. + * + * \li <b>NO_INTERNAL_SERIAL</b> - (\ref Group_StdDescriptors) - <i>All Architectures</i> \n + * Some AVR models contain a unique serial number which can be used as the device serial number, while in device mode. This allows + * the host to uniquely identify the device regardless of if it is moved between USB ports on the same computer, allowing allocated + * resources (such as drivers, COM Port number allocations) to be preserved. This is not needed in many apps, and so the code that + * performs this task can be disabled by defining this option and passing it to the compiler via the -D switch. + * + * \li <b>FIXED_CONTROL_ENDPOINT_SIZE</b>=<i>x</i> - (\ref Group_EndpointManagement) - <i>All Architectures</i> \n + * By default, the library determines the size of the control endpoint (when in device mode) by reading the device descriptor. + * Normally this reduces the amount of configuration required for the library, allows the value to change dynamically (if + * descriptors are stored in EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this token can be + * defined to a non-zero value instead to give the size in bytes of the control endpoint, to reduce the size of the compiled + * binary. + * + * \li <b>DEVICE_STATE_AS_GPIOR</b> - (\ref Group_Device) - <i>AVR8 Only</i> \n + * One of the most frequently used global variables in the stack is the USB_DeviceState global, which indicates the current state of + * the Device State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token + * may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR + * reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except + * implicitly via the library APIs. + * + * \li <b>FIXED_NUM_CONFIGURATIONS</b>=<i>x</i> - (\ref Group_Device) - <i>All Architectures</i> \n + * By default, the library determines the number of configurations a USB device supports by reading the device descriptor. This reduces + * the amount of configuration required to set up the library, and allows the value to change dynamically (if descriptors are stored in + * EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this value may be fixed via this token in the project + * makefile to reduce the compiled size of the binary at the expense of flexibility. + * + * \li <b>CONTROL_ONLY_DEVICE</b> - (\ref Group_Device) - <i>All Architectures</i> \n + * In some limited USB device applications, there are no device endpoints other than the control endpoint; i.e. all device communication + * is through control endpoint requests. Defining this token will remove several features related to the selection and control of device + * endpoints internally, saving space. Generally, this is usually only useful in (some) bootloaders and is best avoided. + * + * \li <b>MAX_ENDPOINT_INDEX</b> - (\ref Group_Device) - <i>XMEGA Only</i> \n + * Defining this value to the highest index (not address - this excludes the direction flag) endpoint within the device will restrict the + * number of FIFOs created internally for the endpoint buffers, reducing the total RAM usage. + * + * \li <b>INTERRUPT_CONTROL_ENDPOINT</b> - (\ref Group_USBManagement) - <i>All Architectures</i> \n + * Some applications prefer to not call the USB_USBTask() management task regularly while in device mode, as it can complicate code significantly. + * Instead, when device mode is used this token can be passed to the library via the -D switch to allow the library to manage the USB control + * endpoint entirely via USB controller interrupts asynchronously to the user application. When defined, USB_USBTask() does not need to be called + * when in USB device mode. + * + * \li <b>NO_DEVICE_REMOTE_WAKEUP</b> - (\ref Group_Device) - <i>All Architectures</i> \n + * Many devices do not require the use of the Remote Wakeup features of USB, used to wake up the USB host when suspended. On these devices, + * the code required to manage device Remote Wakeup can be disabled by defining this token and passing it to the library via the -D switch. + * + * \li <b>NO_DEVICE_SELF_POWER</b> - (\ref Group_Device) - <i>All Architectures</i> \n + * USB devices may be bus powered, self powered, or a combination of both. When a device can be both bus powered and self powered, the host may + * query the device to determine the current power source, via \ref USB_Device_CurrentlySelfPowered. For solely bus powered devices, this global + * and the code required to manage it may be disabled by passing this token to the library via the -D switch. * * * \section Sec_SummaryUSBHostTokens USB Host Mode Driver Related Tokens * * This section describes compile tokens which affect USB driver stack of the LUFA library when used in Host mode. * - * - <b>HOST_STATE_AS_GPIOR</b> - (\ref Group_Host) - <i>AVR8 Only</i> \n - * One of the most frequently used global variables in the stack is the USB_HostState global, which indicates the current state of - * the Host State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token - * may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR - * reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except - * implicitly via the library APIs. - * - * - <b>USB_HOST_TIMEOUT_MS</b>=<i>x</i> - (\ref Group_Host) - <i>All Architectures</i> \n - * When a control transfer is initiated in host mode to an attached device, a timeout is used to abort the transfer if the attached - * device fails to respond within the timeout period. This token may be defined to a non-zero 16-bit value to set the timeout period for - * control transfers, specified in milliseconds. If not defined, the default value specified in Host.h is used instead. - * - * - <b>HOST_DEVICE_SETTLE_DELAY_MS</b>=<i>x</i> - (\ref Group_Host) - <i>All Architectures</i> \n - * Some devices require a delay of up to 5 seconds after they are connected to VBUS before the enumeration process can be started, or - * they will fail to enumerate correctly. By placing a delay before the enumeration process, it can be ensured that the bus has settled - * back to a known idle state before communications occur with the device. This token may be defined to a 16-bit value to set the device - * settle period, specified in milliseconds. If not defined, the default value specified in Host.h is used instead. - * - * - <b>INVERTED_VBUS_ENABLE_LINE</b> - (\ref Group_Host) - <i>All Architectures</i> \n - * If enabled, this will indicate that the USB target VBUS line polarity is inverted; i.e. it should be pulled low to enable VBUS to the - * target, and pulled high to stop the target VBUS generation. - * - * \attention On AVR8 architecture devices, this compile time option requires \c NO_AUTO_VBUS_MANAGEMENT to be set. - * - * - <b>NO_AUTO_VBUS_MANAGEMENT</b> - (\ref Group_Host) - <i>All Architectures</i> \n - * Disables the automatic management of VBUS to the target, i.e. automatic shut down in the even of an overcurrent situation. When enabled, VBUS - * is enabled while the USB controller is initialized in USB Host mode. + * \li <b>HOST_STATE_AS_GPIOR</b> - (\ref Group_Host) - <i>AVR8 Only</i> \n + * One of the most frequently used global variables in the stack is the USB_HostState global, which indicates the current state of + * the Host State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token + * may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR + * reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except + * implicitly via the library APIs. + * + * \li <b>USB_HOST_TIMEOUT_MS</b>=<i>x</i> - (\ref Group_Host) - <i>All Architectures</i> \n + * When a control transfer is initiated in host mode to an attached device, a timeout is used to abort the transfer if the attached + * device fails to respond within the timeout period. This token may be defined to a non-zero 16-bit value to set the timeout period for + * control transfers, specified in milliseconds. If not defined, the default value specified in Host.h is used instead. + * + * \li <b>HOST_DEVICE_SETTLE_DELAY_MS</b>=<i>x</i> - (\ref Group_Host) - <i>All Architectures</i> \n + * Some devices require a delay of up to 5 seconds after they are connected to VBUS before the enumeration process can be started, or + * they will fail to enumerate correctly. By placing a delay before the enumeration process, it can be ensured that the bus has settled + * back to a known idle state before communications occur with the device. This token may be defined to a 16-bit value to set the device + * settle period, specified in milliseconds. If not defined, the default value specified in Host.h is used instead. + * + * \li <b>INVERTED_VBUS_ENABLE_LINE</b> - (\ref Group_Host) - <i>All Architectures</i> \n + * If enabled, this will indicate that the USB target VBUS line polarity is inverted; i.e. it should be pulled low to enable VBUS to the + * target, and pulled high to stop the target VBUS generation. + * \n + * \attention On AVR8 architecture devices, this compile time option requires \c NO_AUTO_VBUS_MANAGEMENT to be set. + * + * \li <b>NO_AUTO_VBUS_MANAGEMENT</b> - (\ref Group_Host) - <i>All Architectures</i> \n + * Disables the automatic management of VBUS to the target, i.e. automatic shut down in the even of an overcurrent situation. When enabled, VBUS + * is enabled while the USB controller is initialized in USB Host mode. */ diff --git a/LUFA/DoxygenPages/ExportingLibrary.txt b/LUFA/DoxygenPages/ExportingLibrary.txt index 449827ea7..095184862 100644 --- a/LUFA/DoxygenPages/ExportingLibrary.txt +++ b/LUFA/DoxygenPages/ExportingLibrary.txt @@ -29,6 +29,7 @@ * - Documentation/ * - DoxygenPages/ * - CodeTemplates/ + * - StudioIntegration/ * * If required, files from the CodeTemplates/ subdirectory may be copied to your IDE project as needed. * diff --git a/Projects/AVRISP-MKII/Doxygen.conf b/Projects/AVRISP-MKII/Doxygen.conf index 9147782ff..f627b6bd4 100644 --- a/Projects/AVRISP-MKII/Doxygen.conf +++ b/Projects/AVRISP-MKII/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Projects/Benito/Doxygen.conf b/Projects/Benito/Doxygen.conf index d8bbd3fab..1aefd8617 100644 --- a/Projects/Benito/Doxygen.conf +++ b/Projects/Benito/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Projects/HIDReportViewer/Doxygen.conf b/Projects/HIDReportViewer/Doxygen.conf index 9a70c3a35..7b32694bc 100644 --- a/Projects/HIDReportViewer/Doxygen.conf +++ b/Projects/HIDReportViewer/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Projects/LEDNotifier/Doxygen.conf b/Projects/LEDNotifier/Doxygen.conf index 423230e25..188671cd0 100644 --- a/Projects/LEDNotifier/Doxygen.conf +++ b/Projects/LEDNotifier/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -772,8 +758,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -803,9 +791,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -865,6 +853,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -950,7 +952,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1219,7 +1221,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1242,6 +1244,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1267,8 +1274,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1339,7 +1346,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1362,6 +1369,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1507,6 +1521,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1656,6 +1685,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1710,7 +1745,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1752,7 +1787,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Projects/MIDIToneGenerator/Doxygen.conf b/Projects/MIDIToneGenerator/Doxygen.conf index 11780a4c8..ab997b496 100644 --- a/Projects/MIDIToneGenerator/Doxygen.conf +++ b/Projects/MIDIToneGenerator/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Projects/Magstripe/Doxygen.conf b/Projects/Magstripe/Doxygen.conf index 9ab9217b5..1201a8157 100644 --- a/Projects/Magstripe/Doxygen.conf +++ b/Projects/Magstripe/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Projects/MediaController/Doxygen.conf b/Projects/MediaController/Doxygen.conf index cfc92bd16..7beab2fa2 100644 --- a/Projects/MediaController/Doxygen.conf +++ b/Projects/MediaController/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Projects/MissileLauncher/Doxygen.conf b/Projects/MissileLauncher/Doxygen.conf index d5fd9d9d7..05ec2f9c0 100644 --- a/Projects/MissileLauncher/Doxygen.conf +++ b/Projects/MissileLauncher/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Projects/RelayBoard/Doxygen.conf b/Projects/RelayBoard/Doxygen.conf index a371fad0e..135998cf9 100644 --- a/Projects/RelayBoard/Doxygen.conf +++ b/Projects/RelayBoard/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Projects/SerialToLCD/Doxygen.conf b/Projects/SerialToLCD/Doxygen.conf index df8a5f634..33c93f42b 100644 --- a/Projects/SerialToLCD/Doxygen.conf +++ b/Projects/SerialToLCD/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Projects/TempDataLogger/Doxygen.conf b/Projects/TempDataLogger/Doxygen.conf index eb2cd0505..8809697e0 100644 --- a/Projects/TempDataLogger/Doxygen.conf +++ b/Projects/TempDataLogger/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -770,8 +756,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -801,9 +789,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -863,6 +851,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -948,7 +950,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1217,7 +1219,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1240,6 +1242,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1265,8 +1272,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1337,7 +1344,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1360,6 +1367,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1505,6 +1519,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1654,6 +1683,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1708,7 +1743,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1750,7 +1785,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Projects/USBtoSerial/Doxygen.conf b/Projects/USBtoSerial/Doxygen.conf index c0b1a24b3..80fad2666 100644 --- a/Projects/USBtoSerial/Doxygen.conf +++ b/Projects/USBtoSerial/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Projects/Webserver/Doxygen.conf b/Projects/Webserver/Doxygen.conf index 2596f3c4b..442064679 100644 --- a/Projects/Webserver/Doxygen.conf +++ b/Projects/Webserver/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -770,8 +756,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -801,9 +789,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -863,6 +851,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -948,7 +950,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1217,7 +1219,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1240,6 +1242,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1265,8 +1272,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1337,7 +1344,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1360,6 +1367,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1505,6 +1519,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1654,6 +1683,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1708,7 +1743,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1750,7 +1785,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 diff --git a/Projects/XPLAINBridge/Doxygen.conf b/Projects/XPLAINBridge/Doxygen.conf index 0a0f2a31a..2c75bb729 100644 --- a/Projects/XPLAINBridge/Doxygen.conf +++ b/Projects/XPLAINBridge/Doxygen.conf @@ -1,8 +1,10 @@ -# Doxyfile 1.8.3.1 +# Doxyfile 1.8.4 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # +# All text after a double hash (##) is considered a comment and is placed +# in front of the TAG it is preceding . # All text after a hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] @@ -70,9 +72,9 @@ CREATE_SUBDIRS = NO # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. +# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian, +# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, +# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -262,10 +264,10 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO -# When enabled doxygen tries to link words that correspond to documented classes, -# or namespaces to their corresponding documentation. Such a link can be -# prevented in individual cases by by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. AUTOLINK_SUPPORT = YES @@ -321,11 +323,11 @@ SUBGROUPING = YES INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). +# unions with only public data fields or simple typedef fields will be shown +# inline in the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO (the default), structs, classes, and unions are shown on a separate +# page (for HTML and Man pages) or section (for LaTeX and RTF). INLINE_SIMPLE_STRUCTS = NO @@ -339,30 +341,14 @@ INLINE_SIMPLE_STRUCTS = NO TYPEDEF_HIDES_STRUCT = NO -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can +# be an expensive process and often the same symbol appear multiple times in +# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too +# small doxygen will become slower. If the cache is too large, memory is wasted. +# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid +# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536 +# symbols. LOOKUP_CACHE_SIZE = 0 @@ -373,7 +359,7 @@ LOOKUP_CACHE_SIZE = 0 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES EXTRACT_ALL = YES @@ -769,8 +755,10 @@ IMAGE_PATH = # is the value of the INPUT_FILTER tag, and <input-file> is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. +# If FILTER_PATTERNS is specified, this tag will be ignored. +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. INPUT_FILTER = @@ -800,9 +788,9 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = # If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that -# is part of the input, its contents will be placed on the main page (index.html). -# This can be useful if you have a project on for instance GitHub and want reuse -# the introduction page also for the doxygen output. +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = @@ -862,6 +850,20 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser +# for more acurate parsing at the cost of reduced performance. This can be +# particularly helpful with template rich C++ code for which doxygen's built-in +# parser lacks the necessairy type information. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified at INPUT and INCLUDE_PATH. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -947,7 +949,7 @@ HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that # the files will be copied as-is; there are no commands or markers available. @@ -1216,7 +1218,7 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for -# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and # SVG. The default value is HTML-CSS, which is slower, but has the best # compatibility. @@ -1239,6 +1241,11 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest MATHJAX_EXTENSIONS = +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript +# pieces of code that will be used on startup of the MathJax code. + +MATHJAX_CODEFILE = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1264,8 +1271,8 @@ SERVER_BASED_SEARCH = NO # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain # the search results. Doxygen ships with an example indexer (doxyindexer) and -# search engine (doxysearch.cgi) which are based on the open source search engine -# library Xapian. See the manual for configuration details. +# search engine (doxysearch.cgi) which are based on the open source search +# engine library Xapian. See the manual for configuration details. EXTERNAL_SEARCH = NO @@ -1336,7 +1343,7 @@ COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. +# executive. If left blank a4 will be used. PAPER_TYPE = a4wide @@ -1359,6 +1366,13 @@ LATEX_HEADER = LATEX_FOOTER = +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images +# or other source files which should be copied to the LaTeX output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. + +LATEX_EXTRA_FILES = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1504,6 +1518,21 @@ XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- +# configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files +# that can be used to generate PDF. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. If left blank docbook will be used as the default path. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- @@ -1653,6 +1682,12 @@ ALLEXTERNALS = NO EXTERNAL_GROUPS = YES +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed +# in the related pages index. If set to NO, only the current project's +# pages will be listed. + +EXTERNAL_PAGES = YES + # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). @@ -1707,7 +1742,7 @@ DOT_NUM_THREADS = 0 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # directory containing the font. -DOT_FONTNAME = FreeSans +DOT_FONTNAME = # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. # The default size is 10pt. @@ -1749,7 +1784,7 @@ UML_LOOK = NO # the class node. If there are many fields or methods and many nodes the # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS # threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be +# manageable. Set this to 0 for no limit. Note that the threshold may be # exceeded by 50% before the limit is enforced. UML_LIMIT_NUM_FIELDS = 10 |