diff options
23 files changed, 169 insertions, 228 deletions
diff --git a/Bootloaders/CDC/BootloaderCDC.c b/Bootloaders/CDC/BootloaderCDC.c index 9cdb77695..6b69421e0 100644 --- a/Bootloaders/CDC/BootloaderCDC.c +++ b/Bootloaders/CDC/BootloaderCDC.c @@ -160,45 +160,45 @@ EVENT_HANDLER(USB_UnhandledControlPacket) case REQ_GetLineEncoding:
if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
for (uint8_t i = 0; i < sizeof(LineCoding); i++)
Endpoint_Write_Byte(*(LineCodingData++));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
/* Acknowledge status stage */
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
case REQ_SetLineEncoding:
if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
while (!(Endpoint_IsOUTReceived()));
for (uint8_t i = 0; i < sizeof(LineCoding); i++)
*(LineCodingData++) = Endpoint_Read_Byte();
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
case REQ_SetControlLineState:
if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
diff --git a/Bootloaders/DFU/BootloaderDFU.c b/Bootloaders/DFU/BootloaderDFU.c index 00c1ea54b..289b4eb22 100644 --- a/Bootloaders/DFU/BootloaderDFU.c +++ b/Bootloaders/DFU/BootloaderDFU.c @@ -163,7 +163,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) switch (bRequest)
{
case DFU_DNLOAD:
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Check if bootloader is waiting to terminate */
if (WaitForExit)
@@ -235,7 +235,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Check if endpoint is empty - if so clear it and wait until ready for next packet */
if (!(Endpoint_BytesInEndpoint()))
{
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
while (!(Endpoint_IsOUTReceived()));
}
@@ -279,7 +279,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Check if endpoint is empty - if so clear it and wait until ready for next packet */
if (!(Endpoint_BytesInEndpoint()))
{
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
while (!(Endpoint_IsOUTReceived()));
}
@@ -296,15 +296,15 @@ EVENT_HANDLER(USB_UnhandledControlPacket) }
}
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
break;
case DFU_UPLOAD:
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
while (!(Endpoint_IsINReady()));
@@ -343,7 +343,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Check if endpoint is full - if so clear it and wait until ready for next packet */
if (Endpoint_BytesInEndpoint() == FIXED_CONTROL_ENDPOINT_SIZE)
{
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
while (!(Endpoint_IsINReady()));
}
@@ -368,7 +368,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Check if endpoint is full - if so clear it and wait until ready for next packet */
if (Endpoint_BytesInEndpoint() == FIXED_CONTROL_ENDPOINT_SIZE)
{
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
while (!(Endpoint_IsINReady()));
}
@@ -384,15 +384,15 @@ EVENT_HANDLER(USB_UnhandledControlPacket) DFU_State = dfuIDLE;
}
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
/* Acknowledge status stage */
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
break;
case DFU_GETSTATUS:
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write 8-bit status value */
Endpoint_Write_Byte(DFU_Status);
@@ -407,46 +407,46 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Write 8-bit state string ID number */
Endpoint_Write_Byte(0);
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
/* Acknowledge status stage */
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
break;
case DFU_CLRSTATUS:
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Reset the status value variable to the default OK status */
DFU_Status = OK;
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
break;
case DFU_GETSTATE:
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the current device state to the endpoint */
Endpoint_Write_Byte(DFU_State);
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
/* Acknowledge status stage */
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
break;
case DFU_ABORT:
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Reset the current state variable to the default idle state */
DFU_State = dfuIDLE;
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
break;
}
@@ -463,7 +463,7 @@ static void DiscardFillerBytes(uint8_t NumberOfBytes) {
if (!(Endpoint_BytesInEndpoint()))
{
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
/* Wait until next data packet received */
while (!(Endpoint_IsOUTReceived()));
diff --git a/Bootloaders/TeensyHID/TeensyHID.c b/Bootloaders/TeensyHID/TeensyHID.c index f82e28e72..e81c462a0 100644 --- a/Bootloaders/TeensyHID/TeensyHID.c +++ b/Bootloaders/TeensyHID/TeensyHID.c @@ -101,7 +101,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) case REQ_SetReport:
if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Wait until the command (report) has been sent by the host */
while (!(Endpoint_IsOUTReceived()));
@@ -126,7 +126,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Check if endpoint is empty - if so clear it and wait until ready for next packet */
if (!(Endpoint_BytesInEndpoint()))
{
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
while (!(Endpoint_IsOUTReceived()));
}
@@ -142,11 +142,11 @@ EVENT_HANDLER(USB_UnhandledControlPacket) boot_rww_enable();
}
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
diff --git a/Demos/Device/AudioInput/AudioInput.c b/Demos/Device/AudioInput/AudioInput.c index ade3aa5a3..45b9971f8 100644 --- a/Demos/Device/AudioInput/AudioInput.c +++ b/Demos/Device/AudioInput/AudioInput.c @@ -139,7 +139,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) {
uint16_t wValue = Endpoint_Read_Word_LE();
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Check if the host is enabling the audio interface (setting AlternateSetting to 1) */
if (wValue)
@@ -155,7 +155,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
diff --git a/Demos/Device/AudioOutput/AudioOutput.c b/Demos/Device/AudioOutput/AudioOutput.c index aae01680a..ba9a499a4 100644 --- a/Demos/Device/AudioOutput/AudioOutput.c +++ b/Demos/Device/AudioOutput/AudioOutput.c @@ -166,7 +166,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) {
uint16_t wValue = Endpoint_Read_Word_LE();
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Check if the host is enabling the audio interface (setting AlternateSetting to 1) */
if (wValue)
@@ -182,7 +182,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
diff --git a/Demos/Device/CDC/CDC.c b/Demos/Device/CDC/CDC.c index 4c51fc6b7..fb7d74b07 100644 --- a/Demos/Device/CDC/CDC.c +++ b/Demos/Device/CDC/CDC.c @@ -166,13 +166,13 @@ EVENT_HANDLER(USB_UnhandledControlPacket) if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
/* Acknowledge the SETUP packet, ready for data transfer */
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the line coding data to the control endpoint */
Endpoint_Write_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t));
/* Finalize the stream transfer to send the last packet or clear the host abort */
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
@@ -180,13 +180,13 @@ EVENT_HANDLER(USB_UnhandledControlPacket) if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
/* Acknowledge the SETUP packet, ready for data transfer */
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Read the line coding data in from the host into the global struct */
Endpoint_Read_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t));
/* Finalize the stream transfer to clear the last packet from the host */
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
@@ -205,11 +205,11 @@ EVENT_HANDLER(USB_UnhandledControlPacket) #endif
/* Acknowledge the SETUP packet, ready for data transfer */
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
diff --git a/Demos/Device/DualCDC/DualCDC.c b/Demos/Device/DualCDC/DualCDC.c index 69d26c488..bbcbecc3d 100644 --- a/Demos/Device/DualCDC/DualCDC.c +++ b/Demos/Device/DualCDC/DualCDC.c @@ -204,13 +204,13 @@ EVENT_HANDLER(USB_UnhandledControlPacket) if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
/* Acknowledge the SETUP packet, ready for data transfer */
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the line coding data to the control endpoint */
Endpoint_Write_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t));
/* Finalize the stream transfer to send the last packet or clear the host abort */
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
@@ -218,13 +218,13 @@ EVENT_HANDLER(USB_UnhandledControlPacket) if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
/* Acknowledge the SETUP packet, ready for data transfer */
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Read the line coding data in from the host into the global struct */
Endpoint_Read_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t));
/* Finalize the stream transfer to clear the last packet from the host */
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
@@ -232,11 +232,11 @@ EVENT_HANDLER(USB_UnhandledControlPacket) if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
/* Acknowledge the SETUP packet, ready for data transfer */
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
diff --git a/Demos/Device/GenericHID/GenericHID.c b/Demos/Device/GenericHID/GenericHID.c index a0d4f150c..207f63c26 100644 --- a/Demos/Device/GenericHID/GenericHID.c +++ b/Demos/Device/GenericHID/GenericHID.c @@ -165,7 +165,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) case REQ_GetReport:
if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
uint8_t GenericData[GENERIC_REPORT_SIZE];
@@ -175,14 +175,14 @@ EVENT_HANDLER(USB_UnhandledControlPacket) Endpoint_Write_Control_Stream_LE(&GenericData, sizeof(GenericData));
/* Finalize the stream transfer to send the last packet or clear the host abort */
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
case REQ_SetReport:
if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Wait until the generic report has been sent by the host */
while (!(Endpoint_IsOUTReceived()));
@@ -194,13 +194,13 @@ EVENT_HANDLER(USB_UnhandledControlPacket) ProcessGenericHIDReport(GenericData);
/* Clear the endpoint data */
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
/* Wait until the host is ready to receive the request confirmation */
while (!(Endpoint_IsINReady()));
/* Handshake the request by sending an empty IN packet */
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
diff --git a/Demos/Device/Joystick/Joystick.c b/Demos/Device/Joystick/Joystick.c index 60eef548e..e5d23bd6d 100644 --- a/Demos/Device/Joystick/Joystick.c +++ b/Demos/Device/Joystick/Joystick.c @@ -145,13 +145,13 @@ EVENT_HANDLER(USB_UnhandledControlPacket) if (wLength > sizeof(JoystickReportData))
wLength = sizeof(JoystickReportData);
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the report data to the control endpoint */
Endpoint_Write_Control_Stream_LE(&JoystickReportData, wLength);
/* Finalize the stream transfer to send the last packet or clear the host abort */
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
diff --git a/Demos/Device/Keyboard/Keyboard.c b/Demos/Device/Keyboard/Keyboard.c index f0e0186d0..6d7ee3fcd 100644 --- a/Demos/Device/Keyboard/Keyboard.c +++ b/Demos/Device/Keyboard/Keyboard.c @@ -216,20 +216,20 @@ EVENT_HANDLER(USB_UnhandledControlPacket) if (wLength > sizeof(KeyboardReportData))
wLength = sizeof(KeyboardReportData);
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the report data to the control endpoint */
Endpoint_Write_Control_Stream_LE(&KeyboardReportData, wLength);
/* Finalize the stream transfer to send the last packet or clear the host abort */
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
case REQ_SetReport:
if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Wait until the LED report has been sent by the host */
while (!(Endpoint_IsOUTReceived()));
@@ -241,28 +241,28 @@ EVENT_HANDLER(USB_UnhandledControlPacket) ProcessLEDReport(LEDStatus);
/* Clear the endpoint data */
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
case REQ_GetProtocol:
if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the current protocol flag to the host */
Endpoint_Write_Byte(UsingReportProtocol);
/* Send the flag to the host */
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
/* Acknowledge status stage */
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
@@ -272,14 +272,14 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Read in the wValue parameter containing the new protocol mode */
uint16_t wValue = Endpoint_Read_Word_LE();
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Set or clear the flag depending on what the host indicates that the current Protocol should be */
UsingReportProtocol = (wValue != 0x0000);
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
@@ -289,31 +289,31 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Read in the wValue parameter containing the idle period */
uint16_t wValue = Endpoint_Read_Word_LE();
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Get idle period in MSB */
IdleCount = (wValue >> 8);
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
case REQ_GetIdle:
if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the current idle duration to the host */
Endpoint_Write_Byte(IdleCount);
/* Send the flag to the host */
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
/* Acknowledge status stage */
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
diff --git a/Demos/Device/KeyboardMouse/KeyboardMouse.c b/Demos/Device/KeyboardMouse/KeyboardMouse.c index 957b9b38c..9cae69a5e 100644 --- a/Demos/Device/KeyboardMouse/KeyboardMouse.c +++ b/Demos/Device/KeyboardMouse/KeyboardMouse.c @@ -167,7 +167,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) if (wLength > ReportSize)
wLength = ReportSize;
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the report data to the control endpoint */
Endpoint_Write_Control_Stream_LE(ReportData, wLength);
@@ -176,14 +176,14 @@ EVENT_HANDLER(USB_UnhandledControlPacket) memset(ReportData, 0, ReportSize);
/* Finalize the stream transfer to send the last packet or clear the host abort */
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
case REQ_SetReport:
if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Wait until the LED report has been sent by the host */
while (!(Endpoint_IsOUTReceived()));
@@ -205,11 +205,11 @@ EVENT_HANDLER(USB_UnhandledControlPacket) LEDs_SetAllLEDs(LEDMask);
/* Clear the endpoint data */
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
diff --git a/Demos/Device/MassStorage/MassStorage.c b/Demos/Device/MassStorage/MassStorage.c index 7ddb8f05a..8c7db9322 100644 --- a/Demos/Device/MassStorage/MassStorage.c +++ b/Demos/Device/MassStorage/MassStorage.c @@ -153,30 +153,30 @@ EVENT_HANDLER(USB_UnhandledControlPacket) case REQ_MassStorageReset:
if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Indicate that the current transfer should be aborted */
IsMassStoreReset = true;
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
case REQ_GetMaxLUN:
if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Indicate to the host the number of supported LUNs (virtual disks) on the device */
Endpoint_Write_Byte(TOTAL_LUNS - 1);
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
/* Acknowledge status stage */
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
diff --git a/Demos/Device/Mouse/Mouse.c b/Demos/Device/Mouse/Mouse.c index 38a7086d5..0959a4a12 100644 --- a/Demos/Device/Mouse/Mouse.c +++ b/Demos/Device/Mouse/Mouse.c @@ -206,7 +206,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) if (wLength > sizeof(MouseReportData))
wLength = sizeof(MouseReportData);
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the report data to the control endpoint */
Endpoint_Write_Control_Stream_LE(&MouseReportData, wLength);
@@ -215,24 +215,24 @@ EVENT_HANDLER(USB_UnhandledControlPacket) memset(&MouseReportData, 0, sizeof(MouseReportData));
/* Finalize the stream transfer to send the last packet or clear the host abort */
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
case REQ_GetProtocol:
if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the current protocol flag to the host */
Endpoint_Write_Byte(UsingReportProtocol);
/* Send the flag to the host */
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
/* Acknowledge status stage */
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
@@ -242,14 +242,14 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Read in the wValue parameter containing the new protocol mode */
uint16_t wValue = Endpoint_Read_Word_LE();
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Set or clear the flag depending on what the host indicates that the current Protocol should be */
UsingReportProtocol = (wValue != 0x0000);
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
@@ -259,31 +259,31 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Read in the wValue parameter containing the idle period */
uint16_t wValue = Endpoint_Read_Word_LE();
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Get idle period in MSB */
IdleCount = (wValue >> 8);
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
case REQ_GetIdle:
if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the current idle duration to the host */
Endpoint_Write_Byte(IdleCount);
/* Send the flag to the host */
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
/* Acknowledge status stage */
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
diff --git a/Demos/Device/RNDISEthernet/RNDISEthernet.c b/Demos/Device/RNDISEthernet/RNDISEthernet.c index d77cc457b..ec8eb7b87 100644 --- a/Demos/Device/RNDISEthernet/RNDISEthernet.c +++ b/Demos/Device/RNDISEthernet/RNDISEthernet.c @@ -156,13 +156,13 @@ EVENT_HANDLER(USB_UnhandledControlPacket) if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
/* Clear the SETUP packet, ready for data transfer */
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Read in the RNDIS message into the message buffer */
Endpoint_Read_Control_Stream_LE(RNDISMessageBuffer, wLength);
/* Finalize the stream transfer to clear the last packet from the host */
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
/* Process the RNDIS message */
ProcessRNDISControlMessage();
@@ -185,13 +185,13 @@ EVENT_HANDLER(USB_UnhandledControlPacket) wLength = MessageHeader->MessageLength;
/* Clear the SETUP packet, ready for data transfer */
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the message response data to the endpoint */
Endpoint_Write_Control_Stream_LE(RNDISMessageBuffer, wLength);
/* Finalize the stream transfer to send the last packet or clear the host abort */
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
/* Reset the message header once again after transmission */
MessageHeader->MessageLength = 0;
diff --git a/Demos/Device/USBtoSerial/USBtoSerial.c b/Demos/Device/USBtoSerial/USBtoSerial.c index 6bd14ccbe..e1c22fc13 100644 --- a/Demos/Device/USBtoSerial/USBtoSerial.c +++ b/Demos/Device/USBtoSerial/USBtoSerial.c @@ -159,13 +159,13 @@ EVENT_HANDLER(USB_UnhandledControlPacket) if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
/* Acknowledge the SETUP packet, ready for data transfer */
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the line coding data to the control endpoint */
Endpoint_Write_Control_Stream_LE(LineCodingData, sizeof(LineCoding));
/* Finalize the stream transfer to send the last packet or clear the host abort */
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
@@ -173,13 +173,13 @@ EVENT_HANDLER(USB_UnhandledControlPacket) if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
/* Acknowledge the SETUP packet, ready for data transfer */
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Read the line coding data in from the host into the global struct */
Endpoint_Read_Control_Stream_LE(LineCodingData, sizeof(LineCoding));
/* Finalize the stream transfer to clear the last packet from the host */
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
/* Reconfigure the USART with the new settings */
ReconfigureUSART();
@@ -201,11 +201,11 @@ EVENT_HANDLER(USB_UnhandledControlPacket) #endif
/* Acknowledge the SETUP packet, ready for data transfer */
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
diff --git a/LUFA/ChangeLog.txt b/LUFA/ChangeLog.txt index 38b666b49..f0c33e01a 100644 --- a/LUFA/ChangeLog.txt +++ b/LUFA/ChangeLog.txt @@ -36,14 +36,13 @@ * - The USB Host management task now saves and restores the currently selected pipe before and after the task completes
* - Fixed GenericHIDHost demo report write routine incorrect for control type requests (thanks to Andrei Krainev)
* - Removed Endpoint_ClearCurrentBank() and Pipe_ClearCurrentBank() in favour of new Endpoint_ClearIN(), Endpoint_ClearOUT(),
- * Endpoint_ClearControlIN(), Endpoint_ClearControlOUT(), Pipe_ClearIN(), Pipe_ClearOUT(), Pipe_ClearControlIN() and
- * Pipe_ClearControlOUT() macros (done to allow for the detection of packets of zero length)
+ * Pipe_ClearIN() and Pipe_ClearOUT() macros (done to allow for the detection of packets of zero length)
* - Renamed *_ReadWriteAllowed() macros to *_IsReadWriteAllowed() to remain consistent with the rest of the LUFA API
* - Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(), Endpoint_ClearSetupReceived() macro has been
- * renamed to Endpoint_ClearControlSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the
+ * renamed to Endpoint_ClearSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the
* Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe
* bank management API
- * - Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel)
+ * - Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel (Curetis AG))
* - Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity
* - Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity
* - Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway
diff --git a/LUFA/Drivers/USB/LowLevel/DevChapter9.c b/LUFA/Drivers/USB/LowLevel/DevChapter9.c index 19d72983b..3f2805c5a 100644 --- a/LUFA/Drivers/USB/LowLevel/DevChapter9.c +++ b/LUFA/Drivers/USB/LowLevel/DevChapter9.c @@ -108,7 +108,7 @@ void USB_Device_ProcessControlPacket(void) if (Endpoint_IsSETUPReceived())
{
Endpoint_StallTransaction();
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
}
}
@@ -116,11 +116,11 @@ static void USB_Device_SetAddress(void) {
uint8_t wValue_LSB = Endpoint_Read_Byte();
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
while (!(Endpoint_IsINReady()));
@@ -152,11 +152,11 @@ static void USB_Device_SetConfiguration(void) return;
}
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
USB_ConfigurationNumber = wValue_LSB;
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
if (!(AlreadyConfigured) && USB_ConfigurationNumber)
RAISE_EVENT(USB_DeviceEnumerationComplete);
@@ -166,14 +166,14 @@ static void USB_Device_SetConfiguration(void) void USB_Device_GetConfiguration(void)
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
Endpoint_Write_Byte(USB_ConfigurationNumber);
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
static void USB_Device_GetDescriptor(void)
@@ -190,7 +190,7 @@ static void USB_Device_GetDescriptor(void) if ((DescriptorSize = USB_GetDescriptor(wValue, wIndex, &DescriptorPointer)) == NO_DESCRIPTOR)
return;
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
if (wLength > DescriptorSize)
wLength = DescriptorSize;
@@ -201,7 +201,7 @@ static void USB_Device_GetDescriptor(void) {
if (Endpoint_IsOUTReceived())
{
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
return;
}
}
@@ -220,17 +220,17 @@ static void USB_Device_GetDescriptor(void) }
SendZLP = (Endpoint_BytesInEndpoint() == USB_ControlEndpointSize);
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
if (SendZLP)
{
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
static void USB_Device_GetStatus(const uint8_t bmRequestType)
@@ -264,14 +264,14 @@ static void USB_Device_GetStatus(const uint8_t bmRequestType) }
Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
Endpoint_Write_Word_LE(CurrentStatus);
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
#if !defined(FEATURELESS_CONTROL_ONLY_DEVICE)
@@ -306,8 +306,8 @@ static void USB_Device_ClearSetFeature(const uint8_t bRequest, const uint8_t bmR }
Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
- Endpoint_ClearControlSETUP();
- Endpoint_ClearControlIN();
+ Endpoint_ClearSETUP();
+ Endpoint_ClearIN();
}
}
diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.c b/LUFA/Drivers/USB/LowLevel/Endpoint.c index b88547177..e196b6aee 100644 --- a/LUFA/Drivers/USB/LowLevel/Endpoint.c +++ b/LUFA/Drivers/USB/LowLevel/Endpoint.c @@ -59,7 +59,7 @@ bool Endpoint_ConfigureEndpointStatic(const uint8_t Number, const uint8_t UECFG0 Endpoint_SelectEndpoint(Number);
Endpoint_EnableEndpoint();
- UECFG1X = 0;
+ UECFG1X = 0;
UECFG0X = UECFG0XData;
UECFG1X = UECFG1XData;
@@ -307,7 +307,7 @@ uint8_t Endpoint_Write_Control_Stream_LE(const void* Buffer, uint16_t Length) }
SendZLP = (Endpoint_BytesInEndpoint() == USB_ControlEndpointSize);
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
if (Endpoint_IsOUTReceived())
@@ -316,7 +316,7 @@ uint8_t Endpoint_Write_Control_Stream_LE(const void* Buffer, uint16_t Length) if (SendZLP)
{
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
while (!(Endpoint_IsOUTReceived()));
@@ -341,7 +341,7 @@ uint8_t Endpoint_Write_Control_Stream_BE(const void* Buffer, uint16_t Length) }
SendZLP = (Endpoint_BytesInEndpoint() == USB_ControlEndpointSize);
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
if (Endpoint_IsOUTReceived())
@@ -350,7 +350,7 @@ uint8_t Endpoint_Write_Control_Stream_BE(const void* Buffer, uint16_t Length) if (SendZLP)
{
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
while (!(Endpoint_IsOUTReceived()));
@@ -373,7 +373,7 @@ uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer, uint16_t Length) Length--;
}
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
while (!(Endpoint_IsINReady()));
@@ -396,7 +396,7 @@ uint8_t Endpoint_Read_Control_Stream_BE(void* Buffer, uint16_t Length) Length--;
}
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
while (!(Endpoint_IsINReady()));
diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.h b/LUFA/Drivers/USB/LowLevel/Endpoint.h index 90375b0ef..816e7632a 100644 --- a/LUFA/Drivers/USB/LowLevel/Endpoint.h +++ b/LUFA/Drivers/USB/LowLevel/Endpoint.h @@ -309,41 +309,19 @@ *
* \note This is not applicable for non CONTROL type endpoints.
*/
- static inline void Endpoint_ClearControlSETUP(void);
+ static inline void Endpoint_ClearSETUP(void);
- /** Sends an IN packet to the host on the currently selected CONTROL type endpoint, freeing up the
- * endpoint for the next packet.
- *
- * \ingroup Group_EndpointPacketManagement
- *
- * \note For non CONTROL type endpoints, use Endpoint_ClearIN() instead.
- */
- static inline void Endpoint_ClearControlIN(void);
-
- /** Acknowledges an OUT packet to the host on the currently selected CONTROL type endpoint, freeing
- * up the endpoint for the next packet.
+ /** Sends an IN packet to the host on the currently selected endpoint, freeing up the endpoint for the
+ * next packet and switching to the alternative endpoint bank if double banked.
*
* \ingroup Group_EndpointPacketManagement
- *
- * \note For non CONTROL type endpoints, use Endpoint_ClearOUT() instead.
- */
- static inline void Endpoint_ClearControlOUT(void);
-
- /** Sends an IN packet to the host on the currently selected non CONTROL type endpoint, freeing
- * up the endpoint for the next packet and switching to the alternative endpoint bank if double banked.
- *
- * \ingroup Group_EndpointPacketManagement
- *
- * \note For CONTROL type endpoints, use Endpoint_ClearControlIN() instead.
*/
static inline void Endpoint_ClearIN(void);
- /** Acknowledges an OUT packet to the host on the currently selected non CONTROL type endpoint, freeing
- * up the endpoint for the next packet and switching to the alternative endpoint bank if double banked.
+ /** Acknowledges an OUT packet to the host on the currently selected endpoint, freeing up the endpoint
+ * for the next packet and switching to the alternative endpoint bank if double banked.
*
* \ingroup Group_EndpointPacketManagement
- *
- * \note For CONTROL type endpoints, use Endpoint_ClearControlOUT() instead.
*/
static inline void Endpoint_ClearOUT(void);
@@ -417,11 +395,7 @@ #define Endpoint_IsSETUPReceived() ((UEINTX & (1 << RXSTPI)) ? true : false)
- #define Endpoint_ClearControlSETUP() MACROS{ UEINTX &= ~(1 << RXSTPI); }MACROE
-
- #define Endpoint_ClearControlIN() MACROS{ UEINTX &= ~(1 << TXINI); }MACROE
-
- #define Endpoint_ClearControlOUT() MACROS{ UEINTX &= ~(1 << RXOUTI); }MACROE
+ #define Endpoint_ClearSETUP() MACROS{ UEINTX &= ~(1 << RXSTPI); }MACROE
#define Endpoint_ClearIN() MACROS{ uint8_t Temp = UEINTX; UEINTX = (Temp & ~(1 << TXINI)); \
UEINTX = (Temp & ~(1 << FIFOCON)); }MACROE
@@ -900,7 +874,7 @@ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
* sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
* in both failure and success states; the user is responsible for manually clearing the setup OUT to
- * finalize the transfer via the Endpoint_ClearControlOUT() macro.
+ * finalize the transfer via the Endpoint_ClearOUT() macro.
*
* \note This routine should only be used on CONTROL type endpoints.
*
@@ -919,7 +893,7 @@ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
* sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
* in both failure and success states; the user is responsible for manually clearing the setup OUT to
- * finalize the transfer via the Endpoint_ClearControlOUT() macro.
+ * finalize the transfer via the Endpoint_ClearOUT() macro.
*
* \note This routine should only be used on CONTROL type endpoints.
*
@@ -938,7 +912,7 @@ /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
* discarding fully read packets from the host as needed. The device IN acknowledgement is not
* automatically sent after success or failure states; the user is responsible for manually sending the
- * setup IN to finalize the transfer via the Endpoint_ClearControlIN() macro.
+ * setup IN to finalize the transfer via the Endpoint_ClearIN() macro.
*
* \note This routine should only be used on CONTROL type endpoints.
*
@@ -952,12 +926,12 @@ *
* \return A value from the Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
- uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
* discarding fully read packets from the host as needed. The device IN acknowledgement is not
* automatically sent after success or failure states; the user is responsible for manually sending the
- * setup IN to finalize the transfer via the Endpoint_ClearControlIN() macro.
+ * setup IN to finalize the transfer via the Endpoint_ClearIN() macro.
*
* \note This routine should only be used on CONTROL type endpoints.
*
@@ -971,7 +945,7 @@ *
* \return A value from the Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
- uint8_t Endpoint_Read_Control_Stream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t Endpoint_Read_Control_Stream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
diff --git a/LUFA/Drivers/USB/LowLevel/HostChapter9.c b/LUFA/Drivers/USB/LowLevel/HostChapter9.c index c89910e63..dfc3f4483 100644 --- a/LUFA/Drivers/USB/LowLevel/HostChapter9.c +++ b/LUFA/Drivers/USB/LowLevel/HostChapter9.c @@ -58,7 +58,7 @@ uint8_t USB_Host_SendControlRequest(void* BufferPtr) for (uint8_t HeaderByte = 0; HeaderByte < sizeof(USB_Host_Request_Header_t); HeaderByte++)
Pipe_Write_Byte(*(HeaderStream++));
- Pipe_ClearControlSETUP();
+ Pipe_ClearSETUP();
if ((ReturnStatus = USB_Host_Wait_For_Setup_IOS(USB_HOST_WAITFOR_SetupSent)))
goto End_Of_Control_Send;
@@ -91,7 +91,7 @@ uint8_t USB_Host_SendControlRequest(void* BufferPtr) }
Pipe_Freeze();
- Pipe_ClearControlIN();
+ Pipe_ClearIN();
}
}
@@ -101,7 +101,7 @@ uint8_t USB_Host_SendControlRequest(void* BufferPtr) if ((ReturnStatus = USB_Host_Wait_For_Setup_IOS(USB_HOST_WAITFOR_OutReady)))
goto End_Of_Control_Send;
- Pipe_ClearControlOUT();
+ Pipe_ClearOUT();
if ((ReturnStatus = USB_Host_Wait_For_Setup_IOS(USB_HOST_WAITFOR_OutReady)))
goto End_Of_Control_Send;
@@ -124,7 +124,7 @@ uint8_t USB_Host_SendControlRequest(void* BufferPtr) DataLen--;
}
- Pipe_ClearControlOUT();
+ Pipe_ClearOUT();
}
if ((ReturnStatus = USB_Host_Wait_For_Setup_IOS(USB_HOST_WAITFOR_OutReady)))
@@ -139,7 +139,7 @@ uint8_t USB_Host_SendControlRequest(void* BufferPtr) if ((ReturnStatus = USB_Host_Wait_For_Setup_IOS(USB_HOST_WAITFOR_InReceived)))
goto End_Of_Control_Send;
- Pipe_ClearControlIN();
+ Pipe_ClearIN();
}
End_Of_Control_Send:
diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h index c4a58b471..3f512c0d2 100644 --- a/LUFA/Drivers/USB/LowLevel/Pipe.h +++ b/LUFA/Drivers/USB/LowLevel/Pipe.h @@ -420,38 +420,16 @@ */
static inline bool Pipe_IsSETUPSent(void);
- /** Acknowledges the reception of a setup IN request from the attached device on the currently selected
- * CONTROL type pipe, freeing the bank ready for the next packet.
- *
- * \ingroup Group_PipePacketManagement
- *
- * \note For non CONTROL type pipes, use Pipe_ClearIN() instead.
- */
- static inline void Pipe_ClearControlIN(void);
-
- /** Sends the currently selected pipe's contents to the device as an OUT packet on the selected pipe, freeing
- * the bank ready for the next packet.
- *
- * \ingroup Group_PipePacketManagement
- *
- * \note For non CONTROL type pipes, use Pipe_ClearOUT() instead.
- */
- static inline void Pipe_ClearControlOUT(void);
-
/** Sends the currently selected CONTROL type pipe's contents to the device as a SETUP packet.
*
- * \ingroup Group_PipePacketManagement
- *
- * \note This is not applicable for non CONTROL type pipes.
+ * \ingroup Group_PipePacketManagement
*/
- static inline void Pipe_ClearControlSETUP(void);
+ static inline void Pipe_ClearSETUP(void);
/** Acknowledges the reception of a setup IN request from the attached device on the currently selected
* pipe, freeing the bank ready for the next packet.
*
* \ingroup Group_PipePacketManagement
- *
- * \note For CONTROL type pipes, use Pipe_ClearControlIN() instead.
*/
static inline void Pipe_ClearIN(void);
@@ -459,8 +437,6 @@ * the bank ready for the next packet.
*
* \ingroup Group_PipePacketManagement
- *
- * \note For CONTROL type pipes, use Pipe_ClearControlOUT() instead.
*/
static inline void Pipe_ClearOUT(void);
@@ -554,16 +530,10 @@ #define Pipe_ClearIN() MACROS{ uint8_t Temp = UPINTX; UPINTX = (Temp & ~(1 << RXINI)); \
UPINTX = (Temp & ~(1 << FIFOCON)); }MACROE
- #define Pipe_ClearControlIN() MACROS{ uint8_t Temp = UPINTX; UPINTX = (Temp & ~(1 << RXINI)); \
- UPINTX = (Temp & ~(1 << FIFOCON)); }MACROE
-
#define Pipe_ClearOUT() MACROS{ uint8_t Temp = UPINTX; UPINTX = (Temp & ~(1 << TXOUTI)); \
UPINTX = (Temp & ~(1 << FIFOCON)); }MACROE
- #define Pipe_ClearControlOUT() MACROS{ uint8_t Temp = UPINTX; UPINTX = (Temp & ~(1 << TXOUTI)); \
- UPINTX = (Temp & ~(1 << FIFOCON)); }MACROE
-
- #define Pipe_ClearControlSETUP() MACROS{ uint8_t Temp = UPINTX; UPINTX = (Temp & ~(1 << TXSTPI)); \
+ #define Pipe_ClearSETUP() MACROS{ uint8_t Temp = UPINTX; UPINTX = (Temp & ~(1 << TXSTPI)); \
UPINTX = (Temp & ~(1 << FIFOCON)); }MACROE
#define Pipe_IsNAKReceived() ((UPINTX & (1 << NAKEDI)) ? true : false)
diff --git a/LUFA/MigrationInformation.txt b/LUFA/MigrationInformation.txt index 104f0984b..576ba648a 100644 --- a/LUFA/MigrationInformation.txt +++ b/LUFA/MigrationInformation.txt @@ -23,15 +23,14 @@ * library demos should update to the latest versions.
*
* <b>Device Mode</b>
- * - The Endpoint_ClearCurrentBank() macro has been removed, and is now replaced with the Endpoint_ClearIN(), Endpoint_ClearOUT(),
- * Endpoint_ClearControlIN(), Endpoint_ClearControlOUT() and other related macros. See Endpoint.h documentation for more details
- * on the new endpoint management macros.
+ * - The Endpoint_ClearCurrentBank() macro has been removed, and is now replaced with the Endpoint_ClearIN(), Endpoint_ClearOUT()
+ * macros. See Endpoint.h documentation for more details on the new endpoint management macros.
* - The Endpoint_ReadWriteAllowed() macro has been renamed to Endpoint_IsReadWriteAllowed() to be more consistent with the rest of
* the API naming scheme.
* - The Endpoint_IsSetupINReady() and Endpoint_IsSetupOutReceived() macros have been renamed to Endpoint_IsINReady() and
* Endpoint_IsOUTReceived() respectively.
* - The Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived().
- * - The Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearControlSETUP().
+ * - The Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearSETUP().
* - All endpoint read/write/discard aliases which did not have an explicitly endianness specifier (such as Endpoint_Read_Word()) have
* been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions.
*
@@ -41,14 +40,13 @@ * in existing projects where the Control pipe is to be operated on.
* - The USB Host management task now saves and restores the currently selected pipe before and after the task runs. Projects no longer
* need to manage this manually when calling the USB management task.
- * - The Pipe_ClearCurrentBank() macro has been removed, and is now replaced with the Pipe_ClearIN(), Pipe_ClearOUT(),
- * Pipe_ClearControlIN(), Pipe_ClearControlOUT() and other related macros. See Pipe.h documentation for more details on the new pipe
- * management macros.
+ * - The Pipe_ClearCurrentBank() macro has been removed, and is now replaced with the Pipe_ClearIN(), Pipe_ClearOUT() macros. See
+ * Pipe.h documentation for more details on the new pipe management macros.
* - The Pipe_ReadWriteAllowed() macro has been renamed to Pipe_IsReadWriteAllowed() to be more consistent with the rest of the API
* naming scheme.
* - The Pipe_IsSetupINReceived() and Pipe_IsOutReady() macros have been renamed to Pipe_IsINReceived() and Pipe_IsOUTReady()
* respectively.
- * - The new Pipe_ClearControlSETUP() macro should be used to send CONTROL transactions, rather than the previous Pipe_ClearSetupOUT() macro.
+ * - The new Pipe_ClearSETUP() macro should be used to send SETUP transactions, rather than the previous Pipe_ClearSetupOUT() macro.
* - The Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent().
* - The Pipe_ClearSetupSent() macro is no longer applicable and should be removed.
* - All pipe read/write/discard aliases which did not have an explicitly endianness specifier (such as Pipe_Read_Word()) have
diff --git a/Projects/Magstripe/Magstripe.c b/Projects/Magstripe/Magstripe.c index 4511b1c54..94eed314d 100644 --- a/Projects/Magstripe/Magstripe.c +++ b/Projects/Magstripe/Magstripe.c @@ -178,30 +178,30 @@ EVENT_HANDLER(USB_UnhandledControlPacket) if (wLength > sizeof(KeyboardReportData))
wLength = sizeof(KeyboardReportData);
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the report data to the control endpoint */
Endpoint_Write_Control_Stream_LE(&KeyboardReportData, wLength);
/* Finalize the stream transfer to send the last packet or clear the host abort */
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
case REQ_GetProtocol:
if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the current protocol flag to the host */
Endpoint_Write_Byte(UsingReportProtocol);
/* Send the flag to the host */
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
/* Acknowledge status stage */
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
@@ -211,14 +211,14 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Read in the wValue parameter containing the new protocol mode */
uint16_t wValue = Endpoint_Read_Word_LE();
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Set or clear the flag depending on what the host indicates that the current Protocol should be */
UsingReportProtocol = (wValue != 0x0000);
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
@@ -228,31 +228,31 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Read in the wValue parameter containing the idle period */
uint16_t wValue = Endpoint_Read_Word_LE();
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Get idle period in MSB */
IdleCount = (wValue >> 8);
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
}
break;
case REQ_GetIdle:
if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
- Endpoint_ClearControlSETUP();
+ Endpoint_ClearSETUP();
/* Write the current idle duration to the host */
Endpoint_Write_Byte(IdleCount);
/* Send the flag to the host */
- Endpoint_ClearControlIN();
+ Endpoint_ClearIN();
/* Acknowledge status stage */
while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearControlOUT();
+ Endpoint_ClearOUT();
}
break;
|