diff options
| -rw-r--r-- | Bootloaders/TeensyHID/Descriptors.c | 2 | ||||
| -rw-r--r-- | Bootloaders/TeensyHID/TeensyHID.c | 6 | ||||
| -rw-r--r-- | Bootloaders/TeensyHID/makefile | 4 |
3 files changed, 8 insertions, 4 deletions
diff --git a/Bootloaders/TeensyHID/Descriptors.c b/Bootloaders/TeensyHID/Descriptors.c index d421d90f4..52d6c737a 100644 --- a/Bootloaders/TeensyHID/Descriptors.c +++ b/Bootloaders/TeensyHID/Descriptors.c @@ -51,7 +51,7 @@ USB_Descriptor_HIDReport_Datatype_t HIDReport[] = 0x0a, 0x19, 0x00, /* Usage (Vendor Defined) */
0x75, 0x08, /* Report Size (8) */
#if (SPM_PAGESIZE == 128) /* Report Count (SPM_PAGESIZE + 2) */
- 0x95, (SPM_PAGESIZE + 2)
+ 0x95, (SPM_PAGESIZE + 2),
#else
0x96, ((SPM_PAGESIZE + 2) & 0xFF), ((SPM_PAGESIZE + 2) >> 8),
#endif
diff --git a/Bootloaders/TeensyHID/TeensyHID.c b/Bootloaders/TeensyHID/TeensyHID.c index 4e287bcf4..b93be6d18 100644 --- a/Bootloaders/TeensyHID/TeensyHID.c +++ b/Bootloaders/TeensyHID/TeensyHID.c @@ -120,7 +120,11 @@ void EVENT_USB_Device_UnhandledControlRequest(void) boot_spm_busy_wait();
/* Write each of the FLASH page's bytes in sequence */
- for (uint16_t PageByte = 0; PageByte < SPM_PAGESIZE; PageByte += 2)
+ #if (SPM_PAGESIZE == 128)
+ for (uint8_t PageByte = 0; PageByte < SPM_PAGESIZE; PageByte += 2)
+ #else
+ for (uint16_t PageByte = 0; PageByte < SPM_PAGESIZE; PageByte += 2)
+ #endif
{
/* Check if endpoint is empty - if so clear it and wait until ready for next packet */
if (!(Endpoint_BytesInEndpoint()))
diff --git a/Bootloaders/TeensyHID/makefile b/Bootloaders/TeensyHID/makefile index 0d12374b5..404b55f9c 100644 --- a/Bootloaders/TeensyHID/makefile +++ b/Bootloaders/TeensyHID/makefile @@ -48,7 +48,7 @@ # MCU name
-MCU = at90usb1287
+MCU = atmega32u4
# Target board (see library "Board Types" documentation, NONE for projects not requiring
@@ -86,7 +86,7 @@ F_CLOCK = $(F_CPU) # Starting byte address of the bootloader
-BOOT_START = 0x1e000
+BOOT_START = 0x7000
# Output format. (can be srec, ihex, binary)
|