diff options
95 files changed, 274 insertions, 273 deletions
diff --git a/Bootloaders/CDC/BootloaderCDC.c b/Bootloaders/CDC/BootloaderCDC.c index a1394bdfa..e87d47172 100644 --- a/Bootloaders/CDC/BootloaderCDC.c +++ b/Bootloaders/CDC/BootloaderCDC.c @@ -510,7 +510,7 @@ TASK(CDC_Task) }
else if ((Command == 'B') || (Command == 'g'))
{
- /* Delegate the block write/read to a seperate function for clarity */
+ /* Delegate the block write/read to a separate function for clarity */
ReadWriteMemoryBlock(Command);
}
else if (Command == 'R')
diff --git a/Bootloaders/CDC/Descriptors.c b/Bootloaders/CDC/Descriptors.c index ee0e194d8..bfa66a738 100644 --- a/Bootloaders/CDC/Descriptors.c +++ b/Bootloaders/CDC/Descriptors.c @@ -205,7 +205,7 @@ USB_Descriptor_String_t ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Bootloaders/DFU/BootloaderDFU.c b/Bootloaders/DFU/BootloaderDFU.c index 6bea9b25f..5375b9c9d 100644 --- a/Bootloaders/DFU/BootloaderDFU.c +++ b/Bootloaders/DFU/BootloaderDFU.c @@ -539,7 +539,7 @@ static void LoadStartEndAddresses(void) EndAddr = Address[1].Word;
}
-/** Handler for a Memory Program command issued by the host. This routine handles the preperations needed
+/** Handler for a Memory Program command issued by the host. This routine handles the preparations needed
* to write subsequent data from the host into the specified memory.
*/
static void ProcessMemProgCommand(void)
@@ -569,7 +569,7 @@ static void ProcessMemProgCommand(void) }
}
-/** Handler for a Memory Read command issued by the host. This routine handles the preperations needed
+/** Handler for a Memory Read command issued by the host. This routine handles the preparations needed
* to read subsequent data from the specified memory out to the host, as well as implementing the memory
* blank check command.
*/
diff --git a/Bootloaders/DFU/BootloaderDFU.h b/Bootloaders/DFU/BootloaderDFU.h index 5a83403df..d0a825443 100644 --- a/Bootloaders/DFU/BootloaderDFU.h +++ b/Bootloaders/DFU/BootloaderDFU.h @@ -63,7 +63,7 @@ /** Minor bootloader version number. */
#define BOOTLOADER_VERSION_REV 0
- /** Complete bootloder version number expressed as a packed byte, constructed from the
+ /** Complete bootloader version number expressed as a packed byte, constructed from the
* two individual bootloader version macros.
*/
#define BOOTLOADER_VERSION ((BOOTLOADER_VERSION_MINOR << 4) | BOOTLOADER_VERSION_REV)
@@ -100,7 +100,7 @@ */
#define DFU_FILLER_BYTES_SIZE 26
- /** DFU class command request to detatch from the host. */
+ /** DFU class command request to detach from the host. */
#define DFU_DETATCH 0x00
/** DFU class command request to send data from the host to the bootloader. */
@@ -141,7 +141,7 @@ /** Type define for a non-returning function pointer to the loaded application. */
typedef void (*AppPtr_t)(void) ATTR_NO_RETURN;
- /** Type define for a strucuture containing a complete DFU command issued by the host. */
+ /** Type define for a structure containing a complete DFU command issued by the host. */
typedef struct
{
uint8_t Command; /**< Single byte command to perform, one of the COMMAND_* macro values */
diff --git a/Bootloaders/DFU/Descriptors.c b/Bootloaders/DFU/Descriptors.c index 3a1c69c73..1313118c9 100644 --- a/Bootloaders/DFU/Descriptors.c +++ b/Bootloaders/DFU/Descriptors.c @@ -139,7 +139,7 @@ USB_Descriptor_String_t ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Bootloaders/DFU/Descriptors.h b/Bootloaders/DFU/Descriptors.h index 7765981ee..527fc50fd 100644 --- a/Bootloaders/DFU/Descriptors.h +++ b/Bootloaders/DFU/Descriptors.h @@ -44,11 +44,11 @@ #define DTYPE_DFUFunctional 0x21
/** DFU attribute mask, indicating that the DFU device will detach and re-attach when a DFU_DETACH
- * command is issued, rather than the host issing a USB Reset.
+ * command is issued, rather than the host issuing a USB Reset.
*/
#define ATTR_WILL_DETATCH (1 << 3)
- /** DFU attribute mask, indicating that the DFU device can communicate during the manefestation phase
+ /** DFU attribute mask, indicating that the DFU device can communicate during the manifestation phase
* (memory programming phase).
*/
#define ATTR_MANEFESTATION_TOLLERANT (1 << 2)
diff --git a/Bootloaders/TeensyHID/Descriptors.c b/Bootloaders/TeensyHID/Descriptors.c index adfbe6c25..d17f4cfdc 100644 --- a/Bootloaders/TeensyHID/Descriptors.c +++ b/Bootloaders/TeensyHID/Descriptors.c @@ -168,7 +168,7 @@ USB_Descriptor_String_t ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/AudioInput/Descriptors.c b/Demos/Device/AudioInput/Descriptors.c index 7a3e42883..95b2906e8 100644 --- a/Demos/Device/AudioInput/Descriptors.c +++ b/Demos/Device/AudioInput/Descriptors.c @@ -267,7 +267,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/AudioInput/Descriptors.h b/Demos/Device/AudioInput/Descriptors.h index cc0074980..5c5d9a686 100644 --- a/Demos/Device/AudioInput/Descriptors.h +++ b/Demos/Device/AudioInput/Descriptors.h @@ -183,7 +183,7 @@ uint8_t SourceID; /**< Source ID value of the audio source input into this feature unit */
uint8_t ControlSize; /**< Size of each element in the ChanelControlls array */
- uint8_t ChannelControls[3]; /**< Feature masks for the control channel, and each seperate audio channel */
+ uint8_t ChannelControls[3]; /**< Feature masks for the control channel, and each separate audio channel */
uint8_t FeatureUnitStrIndex; /**< Index of a string descriptor describing this descriptor within the device */
} USB_AudioFeatureUnit_t;
@@ -202,7 +202,7 @@ uint8_t AssociatedOutputTerminal; /**< ID of associated output terminal, for physically grouped terminals
* such as the speaker and microphone of a phone handset
*/
- uint8_t TotalChannels; /**< Total number of seperate audio channels within this interface (right, left, etc.) */
+ uint8_t TotalChannels; /**< Total number of separate audio channels within this interface (right, left, etc.) */
uint16_t ChannelConfig; /**< CHANNEL_* masks indicating what channel layout is supported by this terminal */
uint8_t ChannelStrIndex; /**< Index of a string descriptor describing this channel within the device */
diff --git a/Demos/Device/AudioOutput/AudioOutput.c b/Demos/Device/AudioOutput/AudioOutput.c index 0f390f001..855edf68c 100644 --- a/Demos/Device/AudioOutput/AudioOutput.c +++ b/Demos/Device/AudioOutput/AudioOutput.c @@ -236,7 +236,7 @@ TASK(USB_Audio_Task) /* Clear the sample reload timer */
TIFR0 |= (1 << OCF0A);
- /* Retreive the signed 16-bit left and right audio samples */
+ /* Retrieve the signed 16-bit left and right audio samples */
int16_t LeftSample_16Bit = (int16_t)Endpoint_Read_Word_LE();
int16_t RightSample_16Bit = (int16_t)Endpoint_Read_Word_LE();
diff --git a/Demos/Device/AudioOutput/Descriptors.c b/Demos/Device/AudioOutput/Descriptors.c index 169e534ba..30af5e851 100644 --- a/Demos/Device/AudioOutput/Descriptors.c +++ b/Demos/Device/AudioOutput/Descriptors.c @@ -267,7 +267,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/AudioOutput/Descriptors.h b/Demos/Device/AudioOutput/Descriptors.h index 99f10d648..1964b742c 100644 --- a/Demos/Device/AudioOutput/Descriptors.h +++ b/Demos/Device/AudioOutput/Descriptors.h @@ -183,7 +183,7 @@ uint8_t SourceID; /**< Source ID value of the audio source input into this feature unit */
uint8_t ControlSize; /**< Size of each element in the ChanelControlls array */
- uint8_t ChannelControls[3]; /**< Feature masks for the control channel, and each seperate audio channel */
+ uint8_t ChannelControls[3]; /**< Feature masks for the control channel, and each separate audio channel */
uint8_t FeatureUnitStrIndex; /**< Index of a string descriptor describing this descriptor within the device */
} USB_AudioFeatureUnit_t;
@@ -202,7 +202,7 @@ uint8_t AssociatedOutputTerminal; /**< ID of associated output terminal, for physically grouped terminals
* such as the speaker and microphone of a phone handset
*/
- uint8_t TotalChannels; /**< Total number of seperate audio channels within this interface (right, left, etc.) */
+ uint8_t TotalChannels; /**< Total number of separate audio channels within this interface (right, left, etc.) */
uint16_t ChannelConfig; /**< CHANNEL_* masks indicating what channel layout is supported by this terminal */
uint8_t ChannelStrIndex; /**< Index of a string descriptor describing this channel within the device */
diff --git a/Demos/Device/CDC/CDC.c b/Demos/Device/CDC/CDC.c index d4eecc897..5e153f652 100644 --- a/Demos/Device/CDC/CDC.c +++ b/Demos/Device/CDC/CDC.c @@ -56,7 +56,7 @@ TASK_LIST *
* These values are set by the host via a class-specific request, however they are not required to be used accurately.
* It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
- * serial link characteristics and instead sends and recieves data in endpoint streams.
+ * serial link characteristics and instead sends and receives data in endpoint streams.
*/
CDC_Line_Coding_t LineCoding = { BaudRateBPS: 9600,
CharFormat: OneStopBit,
@@ -66,7 +66,7 @@ CDC_Line_Coding_t LineCoding = { BaudRateBPS: 9600, /** String to print through the virtual serial port when the joystick is pressed upwards. */
char JoystickUpString[] = "Joystick Up\r\n";
-/** String to print through the virtual serial port when the joystick is pressed downwards. */
+/** String to print through the virtual serial port when the joystick is pressed downward. */
char JoystickDownString[] = "Joystick Down\r\n";
/** String to print through the virtual serial port when the joystick is pressed left. */
diff --git a/Demos/Device/CDC/CDC.h b/Demos/Device/CDC/CDC.h index d953303f7..a36fdc921 100644 --- a/Demos/Device/CDC/CDC.h +++ b/Demos/Device/CDC/CDC.h @@ -98,17 +98,17 @@ #define CONTROL_LINE_IN_RING (1 << 3)
/** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host,
- * to indicate that a framing error has ocurred on the virtual serial port.
+ * to indicate that a framing error has occurred on the virtual serial port.
*/
#define CONTROL_LINE_IN_FRAMEERROR (1 << 4)
/** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host,
- * to indicate that a parity error has ocurred on the virtual serial port.
+ * to indicate that a parity error has occurred on the virtual serial port.
*/
#define CONTROL_LINE_IN_PARITYERROR (1 << 5)
/** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host,
- * to indicate that a data overrun error has ocurred on the virtual serial port.
+ * to indicate that a data overrun error has occurred on the virtual serial port.
*/
#define CONTROL_LINE_IN_OVERRUNERROR (1 << 6)
@@ -138,7 +138,7 @@ uint8_t ParityType; /**< Parity setting of the virtual serial port, a value from the
* CDCDevice_LineCodingParity_t enum
*/
- uint8_t DataBits; /**< Bits of data per charater of the virtual serial port */
+ uint8_t DataBits; /**< Bits of data per character of the virtual serial port */
} CDC_Line_Coding_t;
/** Type define for a CDC notification, sent to the host via the CDC notification endpoint to indicate a
diff --git a/Demos/Device/CDC/Descriptors.c b/Demos/Device/CDC/Descriptors.c index fa0c79da0..869dc5deb 100644 --- a/Demos/Device/CDC/Descriptors.c +++ b/Demos/Device/CDC/Descriptors.c @@ -216,7 +216,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/DualCDC/Descriptors.c b/Demos/Device/DualCDC/Descriptors.c index 4f74b138b..91ae50eea 100644 --- a/Demos/Device/DualCDC/Descriptors.c +++ b/Demos/Device/DualCDC/Descriptors.c @@ -338,7 +338,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/DualCDC/DualCDC.c b/Demos/Device/DualCDC/DualCDC.c index 3c598da42..fecbaff60 100644 --- a/Demos/Device/DualCDC/DualCDC.c +++ b/Demos/Device/DualCDC/DualCDC.c @@ -57,7 +57,7 @@ TASK_LIST *
* These values are set by the host via a class-specific request, however they are not required to be used accurately.
* It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
- * serial link characteristics and instead sends and recieves data in endpoint streams.
+ * serial link characteristics and instead sends and receives data in endpoint streams.
*/
CDC_Line_Coding_t LineCoding1 = { BaudRateBPS: 9600,
CharFormat: OneStopBit,
@@ -70,7 +70,7 @@ CDC_Line_Coding_t LineCoding1 = { BaudRateBPS: 9600, *
* These values are set by the host via a class-specific request, however they are not required to be used accurately.
* It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
- * serial link characteristics and instead sends and recieves data in endpoint streams.
+ * serial link characteristics and instead sends and receives data in endpoint streams.
*/
CDC_Line_Coding_t LineCoding2 = { BaudRateBPS: 9600,
CharFormat: OneStopBit,
@@ -80,7 +80,7 @@ CDC_Line_Coding_t LineCoding2 = { BaudRateBPS: 9600, /** String to print through the first virtual serial port when the joystick is pressed upwards. */
char JoystickUpString[] = "Joystick Up\r\n";
-/** String to print through the first virtual serial port when the joystick is pressed downwards. */
+/** String to print through the first virtual serial port when the joystick is pressed downward. */
char JoystickDownString[] = "Joystick Down\r\n";
/** String to print through the first virtual serial port when the joystick is pressed left. */
@@ -324,7 +324,7 @@ TASK(CDC1_Task) Endpoint_ClearCurrentBank();
}
-/** Function to manage CDC data transmission and reception to and from the host for the second CDC interface, which echos back
+/** Function to manage CDC data transmission and reception to and from the host for the second CDC interface, which echoes back
* all data sent to it from the host.
*/
TASK(CDC2_Task)
@@ -335,13 +335,13 @@ TASK(CDC2_Task) /* Check to see if any data has been received */
if (Endpoint_ReadWriteAllowed())
{
- /* Create a temp buffer big enough to hold the incomming endpoint packet */
+ /* Create a temp buffer big enough to hold the incoming endpoint packet */
uint8_t Buffer[Endpoint_BytesInEndpoint()];
- /* Remember how large the incomming packet is */
+ /* Remember how large the incoming packet is */
uint16_t DataLength = Endpoint_BytesInEndpoint();
- /* Read in the incomming packet into the buffer */
+ /* Read in the incoming packet into the buffer */
Endpoint_Read_Stream_LE(&Buffer, DataLength);
/* Finalize the stream transfer to send the last packet */
diff --git a/Demos/Device/DualCDC/DualCDC.h b/Demos/Device/DualCDC/DualCDC.h index 4c62abf9d..84be114e9 100644 --- a/Demos/Device/DualCDC/DualCDC.h +++ b/Demos/Device/DualCDC/DualCDC.h @@ -87,7 +87,7 @@ uint8_t ParityType; /**< Parity setting of the virtual serial port, a value from the
* CDCDevice_LineCodingParity_t enum
*/
- uint8_t DataBits; /**< Bits of data per charater of the virtual serial port */
+ uint8_t DataBits; /**< Bits of data per character of the virtual serial port */
} CDC_Line_Coding_t;
/* Enums: */
diff --git a/Demos/Device/GenericHID/Descriptors.c b/Demos/Device/GenericHID/Descriptors.c index c460a6c15..0c3fac7f5 100644 --- a/Demos/Device/GenericHID/Descriptors.c +++ b/Demos/Device/GenericHID/Descriptors.c @@ -195,7 +195,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/GenericHID/GenericHID.c b/Demos/Device/GenericHID/GenericHID.c index cacbdc55c..2d9869982 100644 --- a/Demos/Device/GenericHID/GenericHID.c +++ b/Demos/Device/GenericHID/GenericHID.c @@ -268,7 +268,7 @@ TASK(USB_HID_Report) if (Endpoint_ReadWriteAllowed())
{
- /* Create a tempoary buffer to hold the read in report from the host */
+ /* Create a temporary buffer to hold the read in report from the host */
uint8_t GenericData[GENERIC_REPORT_SIZE];
/* Read Generic Report Data */
@@ -285,7 +285,7 @@ TASK(USB_HID_Report) if (Endpoint_ReadWriteAllowed())
{
- /* Create a tempoary buffer to hold the report to send to the host */
+ /* Create a temporary buffer to hold the report to send to the host */
uint8_t GenericData[GENERIC_REPORT_SIZE];
/* Create Generic Report Data */
diff --git a/Demos/Device/Joystick/Descriptors.c b/Demos/Device/Joystick/Descriptors.c index 36e644c26..788596e11 100644 --- a/Demos/Device/Joystick/Descriptors.c +++ b/Demos/Device/Joystick/Descriptors.c @@ -195,7 +195,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/Keyboard/Descriptors.c b/Demos/Device/Keyboard/Descriptors.c index 1f383ab08..722b65818 100644 --- a/Demos/Device/Keyboard/Descriptors.c +++ b/Demos/Device/Keyboard/Descriptors.c @@ -212,7 +212,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/Keyboard/Keyboard.c b/Demos/Device/Keyboard/Keyboard.c index 265e950e0..d118edea6 100644 --- a/Demos/Device/Keyboard/Keyboard.c +++ b/Demos/Device/Keyboard/Keyboard.c @@ -67,7 +67,7 @@ bool UsingReportProtocol = true; uint8_t IdleCount = 0;
/** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle
- * milliseconds. This is seperate to the IdleCount timer and is incremented and compared as the host may request
+ * milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request
* the current idle period via a Get Idle HID class request, thus its value must be preserved.
*/
uint16_t IdleMSRemaining = 0;
@@ -243,7 +243,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Read in the LED report from the host */
uint8_t LEDStatus = Endpoint_Read_Byte();
- /* Process the incomming LED report */
+ /* Process the incoming LED report */
ProcessLEDReport(LEDStatus);
/* Clear the endpoint data */
diff --git a/Demos/Device/KeyboardMouse/Descriptors.c b/Demos/Device/KeyboardMouse/Descriptors.c index c9d91039b..7f39c6b59 100644 --- a/Demos/Device/KeyboardMouse/Descriptors.c +++ b/Demos/Device/KeyboardMouse/Descriptors.c @@ -282,7 +282,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/MIDI/Descriptors.c b/Demos/Device/MIDI/Descriptors.c index 1dbc1d915..81f574829 100644 --- a/Demos/Device/MIDI/Descriptors.c +++ b/Demos/Device/MIDI/Descriptors.c @@ -278,7 +278,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/MIDI/Descriptors.h b/Demos/Device/MIDI/Descriptors.h index f80e58b20..8a93b87a6 100644 --- a/Demos/Device/MIDI/Descriptors.h +++ b/Demos/Device/MIDI/Descriptors.h @@ -117,7 +117,7 @@ } USB_AudioStreamEndpoint_Std_t;
/** Type define for an Audio class specific MIDI IN jack. This gives information to the host on a MIDI input, either
- * a physical input jack, or a logical jack (recieving input data internally, or from the host via an endpoint).
+ * a physical input jack, or a logical jack (receiving input data internally, or from the host via an endpoint).
*/
typedef struct
{
diff --git a/Demos/Device/MassStorage/Descriptors.c b/Demos/Device/MassStorage/Descriptors.c index a6173156a..dd98db59a 100644 --- a/Demos/Device/MassStorage/Descriptors.c +++ b/Demos/Device/MassStorage/Descriptors.c @@ -172,7 +172,7 @@ USB_Descriptor_String_t PROGMEM SerialNumberString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/MassStorage/MassStorage.c b/Demos/Device/MassStorage/MassStorage.c index 92e33073c..403264835 100644 --- a/Demos/Device/MassStorage/MassStorage.c +++ b/Demos/Device/MassStorage/MassStorage.c @@ -56,7 +56,7 @@ CommandBlockWrapper_t CommandBlock; /** Structure to hold the latest Command Status Wrapper to return to the host, containing the status of the last issued command. */
CommandStatusWrapper_t CommandStatus = { Signature: CSW_SIGNATURE };
-/** Flag to asyncronously abort any in-progress data transfers upon the reception of a mass storage reset command. */
+/** Flag to asynchronously abort any in-progress data transfers upon the reception of a mass storage reset command. */
volatile bool IsMassStoreReset = false;
/** Main program entry point. This routine configures the hardware required by the application, then
@@ -262,7 +262,7 @@ TASK(USB_MassStorage) /* Return command status block to the host */
ReturnCommandStatus();
- /* Check if a Mass Storage Reset ocurred */
+ /* Check if a Mass Storage Reset occurred */
if (IsMassStoreReset)
{
/* Reset the data endpoint banks */
diff --git a/Demos/Device/MassStorage/SCSI.c b/Demos/Device/MassStorage/SCSI.c index d9c552691..d50f63d91 100644 --- a/Demos/Device/MassStorage/SCSI.c +++ b/Demos/Device/MassStorage/SCSI.c @@ -38,7 +38,7 @@ #define INCLUDE_FROM_SCSI_C
#include "SCSI.h"
-/** Structure to hold the SCSI reponse data to a SCSI INQUIRY command. This gives information about the device's
+/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
* features and capabilities.
*/
SCSI_Inquiry_Response_t InquiryData =
@@ -88,7 +88,7 @@ void SCSI_DecodeSCSICommand(void) {
bool CommandSuccess = false;
- /* Run the apropriate SCSI command hander function based on the passed command */
+ /* Run the appropriate SCSI command hander function based on the passed command */
switch (CommandBlock.SCSICommandData[0])
{
case SCSI_CMD_INQUIRY:
@@ -235,7 +235,7 @@ static bool SCSI_Command_Read_Capacity_10(void) return true;
}
-/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command peforms a quick check of the Dataflash ICs on the
+/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the
* board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
* supported.
*
diff --git a/Demos/Device/Mouse/Descriptors.c b/Demos/Device/Mouse/Descriptors.c index dac048b97..9ad39f4d4 100644 --- a/Demos/Device/Mouse/Descriptors.c +++ b/Demos/Device/Mouse/Descriptors.c @@ -195,7 +195,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/Mouse/Mouse.c b/Demos/Device/Mouse/Mouse.c index c066d424a..c429768c9 100644 --- a/Demos/Device/Mouse/Mouse.c +++ b/Demos/Device/Mouse/Mouse.c @@ -66,7 +66,7 @@ bool UsingReportProtocol = true; uint8_t IdleCount = 0;
/** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle
- * milliseconds. This is seperate to the IdleCount timer and is incremented and compared as the host may request
+ * milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request
* the current idle period via a Get Idle HID class request, thus its value must be preserved.
*/
uint16_t IdleMSRemaining = 0;
diff --git a/Demos/Device/RNDISEthernet/ARP.c b/Demos/Device/RNDISEthernet/ARP.c index 3560403f4..0f108c290 100644 --- a/Demos/Device/RNDISEthernet/ARP.c +++ b/Demos/Device/RNDISEthernet/ARP.c @@ -41,7 +41,7 @@ * to the output Ethernet frame if the host is requesting the IP or MAC address of the
* virtual server device on the network.
*
- * \param InDataStart Pointer to the start of the incomming packet's ARP header
+ * \param InDataStart Pointer to the start of the incoming packet's ARP header
* \param OutDataStart Pointer to the start of the outgoing packet's ARP header
*
* \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
diff --git a/Demos/Device/RNDISEthernet/DHCP.c b/Demos/Device/RNDISEthernet/DHCP.c index 7f220c423..76711fb4f 100644 --- a/Demos/Device/RNDISEthernet/DHCP.c +++ b/Demos/Device/RNDISEthernet/DHCP.c @@ -40,8 +40,8 @@ /** Processes a DHCP packet inside an Ethernet frame, and writes the appropriate response
* to the output Ethernet frame if the host is requesting or accepting an IP address.
*
- * \param IPHeaderInStart Pointer to the start of the incomming packet's IP header
- * \param DHCPHeaderInStart Pointer to the start of the incomming packet's DHCP header
+ * \param IPHeaderInStart Pointer to the start of the incoming packet's IP header
+ * \param DHCPHeaderInStart Pointer to the start of the incoming packet's DHCP header
* \param DHCPHeaderOutStart Pointer to the start of the outgoing packet's DHCP header
*
* \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
@@ -72,12 +72,12 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, void* DHCPHeaderInStart, v memcpy(&DHCPHeaderOUT->ClientHardwareAddress, &DHCPHeaderIN->ClientHardwareAddress, sizeof(MAC_Address_t));
DHCPHeaderOUT->Cookie = SwapEndian_32(DHCP_MAGIC_COOKIE);
- /* Alter the incomming IP packet header so that the corrected IP source and destinations are used - this means that
+ /* Alter the incoming IP packet header so that the corrected IP source and destinations are used - this means that
when the response IP header is generated, it will use the corrected addresses and not the null/broatcast addresses */
IPHeaderIN->SourceAddress = ClientIPAddress;
IPHeaderIN->DestinationAddress = ServerIPAddress;
- /* Process the incomming DHCP packet options */
+ /* Process the incoming DHCP packet options */
while (DHCPOptionsINStart[0] != DHCP_OPTION_END)
{
/* Find the Message Type DHCP option, to determine the type of DHCP packet */
diff --git a/Demos/Device/RNDISEthernet/DHCP.h b/Demos/Device/RNDISEthernet/DHCP.h index f1e14e196..f0e68b994 100644 --- a/Demos/Device/RNDISEthernet/DHCP.h +++ b/Demos/Device/RNDISEthernet/DHCP.h @@ -102,7 +102,7 @@ uint8_t HardwareAddressLength; /**< Length in bytes of a hardware (MAC) address on the network */
uint8_t Hops; /**< Number of hops required to reach the server, unused */
- uint32_t TransactionID; /**< Unique ID of the DHCP packet, for postive matching between sent and recieved packets */
+ uint32_t TransactionID; /**< Unique ID of the DHCP packet, for positive matching between sent and received packets */
uint16_t ElapsedSeconds; /**< Elapsed seconds since the request was made */
uint16_t Flags; /**< BOOTP packet flags */
diff --git a/Demos/Device/RNDISEthernet/Descriptors.c b/Demos/Device/RNDISEthernet/Descriptors.c index 1994c601c..0e7b9348e 100644 --- a/Demos/Device/RNDISEthernet/Descriptors.c +++ b/Demos/Device/RNDISEthernet/Descriptors.c @@ -216,7 +216,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/RNDISEthernet/Ethernet.c b/Demos/Device/RNDISEthernet/Ethernet.c index b8d561509..3d34f716a 100644 --- a/Demos/Device/RNDISEthernet/Ethernet.c +++ b/Demos/Device/RNDISEthernet/Ethernet.c @@ -31,14 +31,14 @@ /** \file
*
* Ethernet frame packet handling routines. This protocol handles the processing of raw Ethernet
- * frames sent and receieved, deferring the processing of subpacket protocols to the appropriate
+ * frames sent and received, deferring the processing of subpacket protocols to the appropriate
* protocol handlers, such as DHCP or ARP.
*/
#include "Ethernet.h"
/* Global Variables: */
-/** Ethernet Frame buffer structure, to hold the incomming Ethernet frame from the host. */
+/** Ethernet Frame buffer structure, to hold the incoming Ethernet frame from the host. */
Ethernet_Frame_Info_t FrameIN;
/** Ethernet Frame buffer structure, to hold the outgoing Ethernet frame to the host. */
@@ -60,14 +60,14 @@ const IP_Address_t BroadcastIPAddress = {BROADCAST_IP_ADDRESS}; const IP_Address_t ClientIPAddress = {CLIENT_IP_ADDRESS};
-/** Processes an incomming Ethernet frame, and writes the appropriate response to the output Ethernet
+/** Processes an incoming Ethernet frame, and writes the appropriate response to the output Ethernet
* frame buffer if the sub protocol handlers create a valid response.
*/
void Ethernet_ProcessPacket(void)
{
DecodeEthernetFrameHeader(FrameIN.FrameData);
- /* Cast the incomming Ethernet frame to the Ethernet header type */
+ /* Cast the incoming Ethernet frame to the Ethernet header type */
Ethernet_Frame_Header_t* FrameINHeader = (Ethernet_Frame_Header_t*)&FrameIN.FrameData;
Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT.FrameData;
@@ -91,7 +91,7 @@ void Ethernet_ProcessPacket(void) break;
}
- /* Protcol processing routine has filled a response, complete the ethernet frame header */
+ /* Protocol processing routine has filled a response, complete the ethernet frame header */
if (RetSize > 0)
{
/* Fill out the response Ethernet frame header */
diff --git a/Demos/Device/RNDISEthernet/Ethernet.h b/Demos/Device/RNDISEthernet/Ethernet.h index 23fc325a5..b360f07ae 100644 --- a/Demos/Device/RNDISEthernet/Ethernet.h +++ b/Demos/Device/RNDISEthernet/Ethernet.h @@ -65,7 +65,7 @@ */
#define MAC_COMPARE(MAC1, MAC2) (memcmp(MAC1, MAC2, sizeof(MAC_Address_t)) == 0)
- /** Maximum size of an incomming or outgoing Ethernet frame in bytes */
+ /** Maximum size of an incoming or outgoing Ethernet frame in bytes */
#define ETHERNET_FRAME_SIZE_MAX 1500
/** Minimum size of an Ethernet packet in bytes, to conform to the Ethernet V2 packet standard */
diff --git a/Demos/Device/RNDISEthernet/ICMP.c b/Demos/Device/RNDISEthernet/ICMP.c index a15564059..da4ffcfa1 100644 --- a/Demos/Device/RNDISEthernet/ICMP.c +++ b/Demos/Device/RNDISEthernet/ICMP.c @@ -40,7 +40,7 @@ /** Processes an ICMP packet inside an Ethernet frame, and writes the appropriate response
* to the output Ethernet frame if the host is issuing a ICMP ECHO request.
*
- * \param InDataStart Pointer to the start of the incomming packet's ICMP header
+ * \param InDataStart Pointer to the start of the incoming packet's ICMP header
* \param OutDataStart Pointer to the start of the outgoing packet's ICMP header
*
* \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
diff --git a/Demos/Device/RNDISEthernet/IP.c b/Demos/Device/RNDISEthernet/IP.c index 65875bb0a..8fb0b446d 100644 --- a/Demos/Device/RNDISEthernet/IP.c +++ b/Demos/Device/RNDISEthernet/IP.c @@ -39,7 +39,7 @@ /** Processes an IP packet inside an Ethernet frame, and writes the appropriate response
* to the output Ethernet frame if one is created by a subprotocol handler.
*
- * \param InDataStart Pointer to the start of the incomming packet's IP header
+ * \param InDataStart Pointer to the start of the incoming packet's IP header
* \param OutDataStart Pointer to the start of the outgoing packet's IP header
*
* \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no
diff --git a/Demos/Device/RNDISEthernet/IP.h b/Demos/Device/RNDISEthernet/IP.h index be928e68f..fc1a46aef 100644 --- a/Demos/Device/RNDISEthernet/IP.h +++ b/Demos/Device/RNDISEthernet/IP.h @@ -51,7 +51,7 @@ /** Protocol IP address of the virtual server machine */
#define SERVER_IP_ADDRESS { 10, 0, 0, 2}
- /** Protocol IP address of the broadcase address */
+ /** Protocol IP address of the broadcast address */
#define BROADCAST_IP_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF}
/** Default Time To Live (TTL) value for sent packets, indicating the maximum allowable hops until their destination is reached */
@@ -75,7 +75,7 @@ uint8_t TypeOfService; /**< Special service type identifier, indicating delay/throughput/reliability levels */
uint16_t TotalLength; /**< Total length of the IP packet, in bytes */
- uint16_t Identification; /**< Idenfication value for identifying fragmented packets */
+ uint16_t Identification; /**< Identification value for identifying fragmented packets */
unsigned int FragmentOffset : 13; /**< Offset of this IP fragment */
unsigned int Flags : 3; /**< Fragment flags, to indicate if a packet is fragmented */
diff --git a/Demos/Device/RNDISEthernet/ProtocolDecoders.c b/Demos/Device/RNDISEthernet/ProtocolDecoders.c index f0e6ebba8..db5da3c81 100644 --- a/Demos/Device/RNDISEthernet/ProtocolDecoders.c +++ b/Demos/Device/RNDISEthernet/ProtocolDecoders.c @@ -29,7 +29,7 @@ */
/* Protocol decoders for Ethernet, TCP, IP, ICMP and ARP. Each of these routines
- accepts a header to the appropriate protocol and prints out pertient information
+ accepts a header to the appropriate protocol and prints out pertinent information
on the packet through the serial port.
To disable printing of a specific protocol, define the token NO_DECODE_{Protocol}
@@ -39,7 +39,7 @@ /** \file
*
* Protocol decoding routines, for the plain-text decoding of Ethernet frames for debugging purposes.
- * Enabled protocol decoders will print incomming Ethernet frame contents through the USART in a human
+ * Enabled protocol decoders will print incoming Ethernet frame contents through the USART in a human
* readable format.
*
* Note that the USART is a slow transmission medium, and will slow down packet processing considerably.
diff --git a/Demos/Device/RNDISEthernet/RNDIS.h b/Demos/Device/RNDISEthernet/RNDIS.h index 7c75875cf..0d240ac4e 100644 --- a/Demos/Device/RNDISEthernet/RNDIS.h +++ b/Demos/Device/RNDISEthernet/RNDIS.h @@ -45,7 +45,7 @@ #include "Ethernet.h"
/* Macros: */
- /** Physical MAC Address of the USB netowork adapter */
+ /** Physical MAC Address of the USB network adapter */
#define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
/** Implemented RNDIS Version Major */
diff --git a/Demos/Device/RNDISEthernet/RNDISEthernet.c b/Demos/Device/RNDISEthernet/RNDISEthernet.c index 3f9bb187a..98863a113 100644 --- a/Demos/Device/RNDISEthernet/RNDISEthernet.c +++ b/Demos/Device/RNDISEthernet/RNDISEthernet.c @@ -99,7 +99,7 @@ EVENT_HANDLER(USB_Connect) }
/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- * the status LEDs and stops all the relevent tasks.
+ * the status LEDs and stops all the relevant tasks.
*/
EVENT_HANDLER(USB_Disconnect)
{
@@ -114,7 +114,7 @@ EVENT_HANDLER(USB_Disconnect) }
/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
- * of the USB device after enumeration, and configures the RNDIS device endpoints and starts the relevent tasks.
+ * of the USB device after enumeration, and configures the RNDIS device endpoints and starts the relevant tasks.
*/
EVENT_HANDLER(USB_ConfigurationChanged)
{
@@ -238,7 +238,7 @@ void UpdateStatus(uint8_t CurrentStatus) }
/** Task to manage the sending and receiving of encapsulated RNDIS data and notifications. This removes the RNDIS
- * wrapper from recieved Ethernet frames and places them in the FrameIN global buffer, or adds the RNDIS wrapper
+ * wrapper from received Ethernet frames and places them in the FrameIN global buffer, or adds the RNDIS wrapper
* to a frame in the FrameOUT global before sending the buffer contents to the host.
*/
TASK(RNDIS_Task)
diff --git a/Demos/Device/RNDISEthernet/TCP.c b/Demos/Device/RNDISEthernet/TCP.c index b4a65344c..f259aad02 100644 --- a/Demos/Device/RNDISEthernet/TCP.c +++ b/Demos/Device/RNDISEthernet/TCP.c @@ -60,7 +60,7 @@ TASK(TCP_Task) {
/* Task to hand off TCP packets to and from the listening applications. */
- /* Run each application in sequence, to process incomming and generate outgoing packets */
+ /* Run each application in sequence, to process incoming and generate outgoing packets */
for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
{
/* Find the corresponding port entry in the port table */
@@ -179,7 +179,7 @@ void TCP_Init(void) */
bool TCP_SetPortState(uint16_t Port, uint8_t State, void (*Handler)(TCP_ConnectionState_t*, TCP_ConnectionBuffer_t*))
{
- /* Note, Port number should be specified in BIG endian to simplfy network code */
+ /* Note, Port number should be specified in BIG endian to simplify network code */
/* Check to see if the port entry is already in the port state table */
for (uint8_t PTableEntry = 0; PTableEntry < MAX_TCP_CONNECTIONS; PTableEntry++)
@@ -226,7 +226,7 @@ bool TCP_SetPortState(uint16_t Port, uint8_t State, void (*Handler)(TCP_Connecti */
uint8_t TCP_GetPortState(uint16_t Port)
{
- /* Note, Port number should be specified in BIG endian to simplfy network code */
+ /* Note, Port number should be specified in BIG endian to simplify network code */
for (uint8_t PTableEntry = 0; PTableEntry < MAX_TCP_CONNECTIONS; PTableEntry++)
{
@@ -251,7 +251,7 @@ uint8_t TCP_GetPortState(uint16_t Port) */
bool TCP_SetConnectionState(uint16_t Port, IP_Address_t RemoteAddress, uint16_t RemotePort, uint8_t State)
{
- /* Note, Port number should be specified in BIG endian to simplfy network code */
+ /* Note, Port number should be specified in BIG endian to simplify network code */
for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
{
@@ -291,7 +291,7 @@ bool TCP_SetConnectionState(uint16_t Port, IP_Address_t RemoteAddress, uint16_t */
uint8_t TCP_GetConnectionState(uint16_t Port, IP_Address_t RemoteAddress, uint16_t RemotePort)
{
- /* Note, Port number should be specified in BIG endian to simplfy network code */
+ /* Note, Port number should be specified in BIG endian to simplify network code */
for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
{
@@ -318,7 +318,7 @@ uint8_t TCP_GetConnectionState(uint16_t Port, IP_Address_t RemoteAddress, uint16 */
TCP_ConnectionInfo_t* TCP_GetConnectionInfo(uint16_t Port, IP_Address_t RemoteAddress, uint16_t RemotePort)
{
- /* Note, Port number should be specified in BIG endian to simplfy network code */
+ /* Note, Port number should be specified in BIG endian to simplify network code */
for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
{
@@ -337,8 +337,8 @@ TCP_ConnectionInfo_t* TCP_GetConnectionInfo(uint16_t Port, IP_Address_t RemoteAd /** Processes a TCP packet inside an Ethernet frame, and writes the appropriate response
* to the output Ethernet frame if one is created by a application handler.
*
- * \param IPHeaderInStart Pointer to the start of the incomming packet's IP header
- * \param TCPHeaderInStart Pointer to the start of the incomming packet's TCP header
+ * \param IPHeaderInStart Pointer to the start of the incoming packet's IP header
+ * \param TCPHeaderInStart Pointer to the start of the incoming packet's TCP header
* \param TCPHeaderOutStart Pointer to the start of the outgoing packet's TCP header
*
* \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no
@@ -357,7 +357,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, void* TCPHeaderInStart, void bool PacketResponse = false;
- /* Check if the destination port is open and allows incomming connections */
+ /* Check if the destination port is open and allows incoming connections */
if (TCP_GetPortState(TCPHeaderIN->DestinationPort) == TCP_Port_Open)
{
/* Detect SYN from host to start a connection */
@@ -375,7 +375,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, void* TCPHeaderInStart, void }
else
{
- /* Process the incomming TCP packet based on the current connection state for the sender and port */
+ /* Process the incoming TCP packet based on the current connection state for the sender and port */
switch (TCP_GetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort))
{
case TCP_Connection_Listen:
@@ -470,7 +470,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, void* TCPHeaderInStart, void }
else
{
- /* Buffer is currently in use by the application, defer processing of the incomming packet */
+ /* Buffer is currently in use by the application, defer processing of the incoming packet */
return NO_PROCESS;
}
}
@@ -591,7 +591,7 @@ static uint16_t TCP_Checksum16(void* TCPHeaderOutStart, IP_Address_t SourceAddre {
uint32_t Checksum = 0;
- /* TCP/IP checksums are the addition of the one's compliment of each word including the IP psudo-header,
+ /* TCP/IP checksums are the addition of the one's compliment of each word including the IP pseudo-header,
complimented */
Checksum += ((uint16_t*)&SourceAddress)[0];
diff --git a/Demos/Device/RNDISEthernet/TCP.h b/Demos/Device/RNDISEthernet/TCP.h index 25fa6575d..d4b72a519 100644 --- a/Demos/Device/RNDISEthernet/TCP.h +++ b/Demos/Device/RNDISEthernet/TCP.h @@ -224,7 +224,7 @@ unsigned char Reserved : 4; /**< Reserved, must be all 0 */
unsigned char DataOffset : 4; /**< Offset of the data from the start of the header, in 4 byte chunks */
uint8_t Flags; /**< TCP packet flags */
- uint16_t WindowSize; /**< Current data window size (bytes remaning in reception buffer) */
+ uint16_t WindowSize; /**< Current data window size (bytes remaining in reception buffer) */
uint16_t Checksum; /**< TCP checksum */
uint16_t UrgentPointer; /**< Urgent data pointer */
diff --git a/Demos/Device/RNDISEthernet/UDP.c b/Demos/Device/RNDISEthernet/UDP.c index 3e1f9395b..1f571c3e9 100644 --- a/Demos/Device/RNDISEthernet/UDP.c +++ b/Demos/Device/RNDISEthernet/UDP.c @@ -40,8 +40,8 @@ /** Processes a UDP packet inside an Ethernet frame, and writes the appropriate response
* to the output Ethernet frame if a subprotocol handler has created a response packet.
*
- * \param IPHeaderInStart Pointer to the start of the incomming packet's IP header
- * \param UDPHeaderInStart Pointer to the start of the incomming packet's UDP header
+ * \param IPHeaderInStart Pointer to the start of the incoming packet's IP header
+ * \param UDPHeaderInStart Pointer to the start of the incoming packet's UDP header
* \param UDPHeaderOutStart Pointer to the start of the outgoing packet's UDP header
*
* \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
diff --git a/Demos/Device/USBtoSerial/Descriptors.c b/Demos/Device/USBtoSerial/Descriptors.c index 03d4ed9e4..67fb4e910 100644 --- a/Demos/Device/USBtoSerial/Descriptors.c +++ b/Demos/Device/USBtoSerial/Descriptors.c @@ -216,7 +216,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/USBtoSerial/RingBuff.h b/Demos/Device/USBtoSerial/RingBuff.h index 4b6bfde66..23288d87a 100644 --- a/Demos/Device/USBtoSerial/RingBuff.h +++ b/Demos/Device/USBtoSerial/RingBuff.h @@ -29,8 +29,8 @@ */
/* Buffer Configuration: */
- /* Buffer length - select static size of created ringbuffers: */
- #define BUFF_STATICSIZE 128 // Set to the static ringbuffer size for all ringbuffers (place size after define)
+ /* Buffer length - select static size of created ring buffers: */
+ #define BUFF_STATICSIZE 128 // Set to the static ring buffer size for all ring buffers (place size after define)
/* Volatile mode - uncomment to make buffers volatile, for use in ISRs, etc: */
#define BUFF_VOLATILE // Uncomment to cause all ring buffers to become volatile (and atomic if multi-byte) in access
@@ -40,9 +40,9 @@ // #define BUFF_DROPNEW // Uncomment to cause full ring buffers to drop the new character when full
// #define BUFF_NODROPCHECK // Uncomment to ignore full ring buffer checks - checking left to user!
- /* Underflow behaviour - select behaviour when Buffer_GetElement is called with an empty ringbuffer: */
- //#define BUFF_EMPTYRETURNSZERO // Uncomment to return 0 when an empty ringbuffer is read
- #define BUFF_NOEMPTYCHECK // Uncomment to disable checking of empty ringbuffers - checking left to user!
+ /* Underflow behaviour - select behaviour when Buffer_GetElement is called with an empty ring buffer: */
+ //#define BUFF_EMPTYRETURNSZERO // Uncomment to return 0 when an empty ring buffer is read
+ #define BUFF_NOEMPTYCHECK // Uncomment to disable checking of empty ring buffers - checking left to user!
/* Buffer storage type - set the datatype for the stored data */
#define BUFF_DATATYPE uint8_t // Change to the data type that is going to be stored into the buffer
diff --git a/Demos/Device/USBtoSerial/USBtoSerial.c b/Demos/Device/USBtoSerial/USBtoSerial.c index c7c9e4b04..a9f0434cb 100644 --- a/Demos/Device/USBtoSerial/USBtoSerial.c +++ b/Demos/Device/USBtoSerial/USBtoSerial.c @@ -79,7 +79,7 @@ int main(void) LEDs_Init();
ReconfigureUSART();
- /* Ringbuffer Initialization */
+ /* Ring buffer Initialization */
Buffer_Initialize(&Rx_Buffer);
Buffer_Initialize(&Tx_Buffer);
diff --git a/Demos/Device/USBtoSerial/USBtoSerial.h b/Demos/Device/USBtoSerial/USBtoSerial.h index 3fb6d7d9f..092660069 100644 --- a/Demos/Device/USBtoSerial/USBtoSerial.h +++ b/Demos/Device/USBtoSerial/USBtoSerial.h @@ -39,7 +39,7 @@ /* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
- #include <avr/interrupt.h> + #include <avr/interrupt.h>
#include <avr/power.h>
#include "Descriptors.h"
@@ -99,17 +99,17 @@ #define CONTROL_LINE_IN_RING (1 << 3)
/** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host,
- * to indicate that a framing error has ocurred on the virtual serial port.
+ * to indicate that a framing error has occurred on the virtual serial port.
*/
#define CONTROL_LINE_IN_FRAMEERROR (1 << 4)
/** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host,
- * to indicate that a parity error has ocurred on the virtual serial port.
+ * to indicate that a parity error has occurred on the virtual serial port.
*/
#define CONTROL_LINE_IN_PARITYERROR (1 << 5)
/** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host,
- * to indicate that a data overrun error has ocurred on the virtual serial port.
+ * to indicate that a data overrun error has occurred on the virtual serial port.
*/
#define CONTROL_LINE_IN_OVERRUNERROR (1 << 6)
@@ -139,7 +139,7 @@ uint8_t ParityType; /**< Parity setting of the virtual serial port, a value from the
* CDCDevice_LineCodingParity_t enum
*/
- uint8_t DataBits; /**< Bits of data per charater of the virtual serial port */
+ uint8_t DataBits; /**< Bits of data per character of the virtual serial port */
} CDC_Line_Coding_t;
/** Type define for a CDC notification, sent to the host via the CDC notification endpoint to indicate a
diff --git a/Demos/Host/CDCHost/CDCHost.c b/Demos/Host/CDCHost/CDCHost.c index 1f05ecb1f..a51f597a2 100644 --- a/Demos/Host/CDCHost/CDCHost.c +++ b/Demos/Host/CDCHost/CDCHost.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"CDC Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -196,7 +196,7 @@ TASK(USB_CDC_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
@@ -248,7 +248,7 @@ TASK(USB_CDC_Host) uint16_t BufferLength = Pipe_BytesInPipe();
uint8_t Buffer[BufferLength];
- /* Read in the pipe data to the tempoary buffer */
+ /* Read in the pipe data to the temporary buffer */
Pipe_Read_Stream_LE(Buffer, BufferLength);
/* Clear the pipe after it is read, ready for the next packet */
diff --git a/Demos/Host/CDCHost/ConfigDescriptor.h b/Demos/Host/CDCHost/ConfigDescriptor.h index 04d71aade..0ba614824 100644 --- a/Demos/Host/CDCHost/ConfigDescriptor.h +++ b/Demos/Host/CDCHost/ConfigDescriptor.h @@ -73,7 +73,7 @@ DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */
InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */
NoCDCInterfaceFound = 4, /**< A compatible CDC interface was not found in the device's Configuration Descriptor */
- NoEndpointFound = 5, /**< Cmpatible CDC endpoints were not found in the device's CDC interface */
+ NoEndpointFound = 5, /**< Compatible CDC endpoints were not found in the device's CDC interface */
};
/* Configuration Descriptor Comparison Functions: */
diff --git a/Demos/Host/GenericHIDHost/GenericHIDHost.c b/Demos/Host/GenericHIDHost/GenericHIDHost.c index c703039f3..778b8f6f8 100644 --- a/Demos/Host/GenericHIDHost/GenericHIDHost.c +++ b/Demos/Host/GenericHIDHost/GenericHIDHost.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Generic HID Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -288,7 +288,7 @@ TASK(USB_HID_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
diff --git a/Demos/Host/KeyboardHost/KeyboardHost.c b/Demos/Host/KeyboardHost/KeyboardHost.c index 13aed7ec3..f73e56893 100644 --- a/Demos/Host/KeyboardHost/KeyboardHost.c +++ b/Demos/Host/KeyboardHost/KeyboardHost.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Keyboard Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -263,7 +263,7 @@ TASK(USB_Keyboard_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
@@ -310,7 +310,7 @@ TASK(USB_Keyboard_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Protocol).\r\n"));
diff --git a/Demos/Host/KeyboardHostWithParser/HIDReport.h b/Demos/Host/KeyboardHostWithParser/HIDReport.h index 5e18313f6..7c59138c2 100644 --- a/Demos/Host/KeyboardHostWithParser/HIDReport.h +++ b/Demos/Host/KeyboardHostWithParser/HIDReport.h @@ -51,7 +51,7 @@ {
ParseSuccessful = 0, /**< HID report descriptor parsed successfully */
ParseError = 1, /**< Failed to fully process the HID report descriptor */
- ParseControlError = 2, /**< Control error occured while trying to read the device HID descriptor */
+ ParseControlError = 2, /**< Control error occurred while trying to read the device HID descriptor */
};
/* Type Defines: */
diff --git a/Demos/Host/KeyboardHostWithParser/KeyboardHostWithParser.c b/Demos/Host/KeyboardHostWithParser/KeyboardHostWithParser.c index f7a0087e7..eefd2fa56 100644 --- a/Demos/Host/KeyboardHostWithParser/KeyboardHostWithParser.c +++ b/Demos/Host/KeyboardHostWithParser/KeyboardHostWithParser.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Keyboard Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -199,7 +199,7 @@ TASK(USB_Keyboard_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
@@ -255,7 +255,7 @@ TASK(USB_Keyboard_Host) break;
}
- /* All LEDs off - ready to indicate keypresses */
+ /* All LEDs off - ready to indicate key presses */
UpdateStatus(Status_USBReady);
puts_P(PSTR("Keyboard Enumerated.\r\n"));
@@ -282,7 +282,7 @@ TASK(USB_Keyboard_Host) /* Check each HID report item in turn, looking for keyboard scan code reports */
for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
{
- /* Create a tempoary item pointer to the next report item */
+ /* Create a temporary item pointer to the next report item */
HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
/* Check if the current report item is a keyboard scancode */
diff --git a/Demos/Host/MassStorageHost/MassStorageHost.c b/Demos/Host/MassStorageHost/MassStorageHost.c index d042b78bb..a7b550ca7 100644 --- a/Demos/Host/MassStorageHost/MassStorageHost.c +++ b/Demos/Host/MassStorageHost/MassStorageHost.c @@ -74,7 +74,7 @@ int main(void) /* Indicate USB not ready */
UpdateStatus(Status_USBNotReady);
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"MassStore Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -137,7 +137,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -170,7 +170,7 @@ TASK(USB_MassStore_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
@@ -222,7 +222,7 @@ TASK(USB_MassStore_Host) break;
}
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = MassStore_GetMaxLUN(&MassStore_MaxLUNIndex)) != HOST_SENDCONTROL_Successful)
{
ShowDiskReadError(PSTR("Get Max LUN"), ErrorCode);
@@ -240,7 +240,7 @@ TASK(USB_MassStore_Host) }
/* Get sense data from the device - many devices will not accept any other commands until the sense data
- * is read - both on startup and after a failed command */
+ * is read - both on start-up and after a failed command */
SCSI_Request_Sense_Response_t SenseData;
if ((ErrorCode = MassStore_RequestSense(0, &SenseData)) != 0)
{
@@ -397,7 +397,7 @@ void UpdateStatus(uint8_t CurrentStatus) LEDs_SetAllLEDs(LEDMask);
}
-/** Indicates that a communication error has ocurred with the attached Mass Storage Device,
+/** Indicates that a communication error has occurred with the attached Mass Storage Device,
* printing error codes to the serial port and waiting until the device is removed before
* continuing.
*
diff --git a/Demos/Host/MassStorageHost/MassStorageHost.h b/Demos/Host/MassStorageHost/MassStorageHost.h index b130cfed3..33e2d2538 100644 --- a/Demos/Host/MassStorageHost/MassStorageHost.h +++ b/Demos/Host/MassStorageHost/MassStorageHost.h @@ -66,7 +66,7 @@ Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
Status_HardwareError = 4, /**< Hardware error while enumerating the attached USB device */
Status_Busy = 5, /**< Busy reading or writing to the attached Mass Storage device */
- Status_SCSICommandError = 6, /**< Error sending or recieving a command to or from the attached SCSI device */
+ Status_SCSICommandError = 6, /**< Error sending or receiving a command to or from the attached SCSI device */
};
/* Task Definitions: */
diff --git a/Demos/Host/MassStorageHost/MassStoreCommands.c b/Demos/Host/MassStorageHost/MassStoreCommands.c index f4143adcf..700d969db 100644 --- a/Demos/Host/MassStorageHost/MassStoreCommands.c +++ b/Demos/Host/MassStorageHost/MassStoreCommands.c @@ -37,8 +37,8 @@ * to a FAT library to give file-level access to an attached device's contents.
*
* \note Many Mass Storage devices on the market are non-compliant to the
- * specifications and thus can proove difficult to interface with. It
- * may be neccesary to retry the functions in the module several times
+ * specifications and thus can prove difficult to interface with. It
+ * may be necessary to retry the functions in the module several times
* after they have returned and error to successfully send the command
* to the device. Some devices may also need to have the stream function
* timeout period extended beyond 100ms (some badly designed devices exceeding
@@ -52,17 +52,17 @@ /* Globals: */
/** Current CBW to send to the device. This is automatically filled by the routines
- * in this file and is not externally accessable.
+ * in this file and is not externally accessible.
*/
static CommandBlockWrapper_t SCSICommandBlock;
/** Current CSW received from the device. This is automatically filled by the routines
- * in this file and is externally accessable so that the return codes may be checked.
+ * in this file and is externally accessible so that the return codes may be checked.
*/
CommandStatusWrapper_t SCSICommandStatus;
/** Current Tag value used in issued CBWs to the device. This is automatically incremented
- * by the routines in this file, and is not externally accessable.
+ * by the routines in this file, and is not externally accessible.
*/
static uint32_t MassStore_Tag = 1;
@@ -122,7 +122,7 @@ static uint8_t MassStore_WaitForDataReceived(void) /* Check to see if a new frame has been issued (1ms elapsed) */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
- /* Clear the flag and decrement the timout period counter */
+ /* Clear the flag and decrement the timeout period counter */
USB_INT_Clear(USB_INT_HSOFI);
TimeoutMSRem--;
diff --git a/Demos/Host/MassStorageHost/MassStoreCommands.h b/Demos/Host/MassStorageHost/MassStoreCommands.h index adab4fb0a..97bbe29b2 100644 --- a/Demos/Host/MassStorageHost/MassStoreCommands.h +++ b/Demos/Host/MassStorageHost/MassStoreCommands.h @@ -54,7 +54,7 @@ /** Command Block Wrapper signature byte, for verification of valid CBW blocks */
#define CBW_SIGNATURE 0x43425355UL
- /** Command Statuc Wrapper signature byte, for verification of valid CSW blocks */
+ /** Command Static Wrapper signature byte, for verification of valid CSW blocks */
#define CSW_SIGNATURE 0x53425355UL
/** Data direction mask for the Flags field of a CBW, indicating Host-to-Device transfer direction */
@@ -98,13 +98,13 @@ {
uint32_t Signature; /**< Command status signature, always equal to CSW_SIGNATURE */
uint32_t Tag; /**< Current CBW tag, to positively associate a CBW with a CSW */
- uint32_t DataTransferResidue; /**< Length of data not transfered */
+ uint32_t DataTransferResidue; /**< Length of data not transferred */
uint8_t Status; /**< Command status, a value from the MassStorageHost_CommandStatusCodes_t enum */
} CommandStatusWrapper_t;
/** Type define for a SCSI Sense structure. Structures of this type are filled out by the
* device via the MassStore_RequestSense() function, indicating the current sense data of the
- * device (giving explitic error codes for the last issued command). For details of the
+ * device (giving explicit error codes for the last issued command). For details of the
* structure contents, refer to the SCSI specifications.
*/
typedef struct
diff --git a/Demos/Host/MouseHost/MouseHost.c b/Demos/Host/MouseHost/MouseHost.c index dd7ff73f0..29cbd8741 100644 --- a/Demos/Host/MouseHost/MouseHost.c +++ b/Demos/Host/MouseHost/MouseHost.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Mouse Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -259,7 +259,7 @@ TASK(USB_Mouse_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
@@ -306,7 +306,7 @@ TASK(USB_Mouse_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Protocol).\r\n"));
diff --git a/Demos/Host/MouseHostWithParser/HIDReport.h b/Demos/Host/MouseHostWithParser/HIDReport.h index 8ebb97da1..aa259a114 100644 --- a/Demos/Host/MouseHostWithParser/HIDReport.h +++ b/Demos/Host/MouseHostWithParser/HIDReport.h @@ -60,7 +60,7 @@ {
ParseSuccessful = 0, /**< HID report descriptor parsed successfully */
ParseError = 1, /**< Failed to fully process the HID report descriptor */
- ParseControlError = 2, /**< Control error occured while trying to read the device HID descriptor */
+ ParseControlError = 2, /**< Control error occurred while trying to read the device HID descriptor */
};
/* Type Defines: */
diff --git a/Demos/Host/MouseHostWithParser/MouseHostWithParser.c b/Demos/Host/MouseHostWithParser/MouseHostWithParser.c index 5ccda4912..79cecdf5b 100644 --- a/Demos/Host/MouseHostWithParser/MouseHostWithParser.c +++ b/Demos/Host/MouseHostWithParser/MouseHostWithParser.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Mouse Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -200,7 +200,7 @@ TASK(USB_Mouse_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
@@ -256,7 +256,7 @@ TASK(USB_Mouse_Host) break;
}
- /* All LEDs off - ready to indicate keypresses */
+ /* All LEDs off - ready to indicate key presses */
UpdateStatus(Status_USBReady);
puts_P(PSTR("Mouse Enumerated.\r\n"));
@@ -285,7 +285,7 @@ TASK(USB_Mouse_Host) /* Check each HID report item in turn, looking for mouse X/Y/button reports */
for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
{
- /* Create a tempoary item pointer to the next report item */
+ /* Create a temporary item pointer to the next report item */
HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
bool FoundData;
diff --git a/Demos/Host/StillImageHost/StillImageCommands.c b/Demos/Host/StillImageHost/StillImageCommands.c index 4d4c0b170..be6f7482d 100644 --- a/Demos/Host/StillImageHost/StillImageCommands.c +++ b/Demos/Host/StillImageHost/StillImageCommands.c @@ -111,7 +111,7 @@ uint8_t SImage_RecieveBlockHeader(void) /* Check to see if a new frame has been issued (1ms elapsed) */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
- /* Clear the flag and decrement the timout period counter */
+ /* Clear the flag and decrement the timeout period counter */
USB_INT_Clear(USB_INT_HSOFI);
TimeoutMSRem--;
diff --git a/Demos/Host/StillImageHost/StillImageCommands.h b/Demos/Host/StillImageHost/StillImageCommands.h index 5679deae2..2ac6afd8b 100644 --- a/Demos/Host/StillImageHost/StillImageCommands.h +++ b/Demos/Host/StillImageHost/StillImageCommands.h @@ -62,7 +62,7 @@ (params * sizeof(PIMA_SendBlock.Params[0])))
/* Type Defines: */
- /** Type define for a PIMA container, use to send commands and receieve responses to and from an
+ /** Type define for a PIMA container, use to send commands and receive responses to and from an
* attached Still Image device.
*/
typedef struct
diff --git a/Demos/Host/StillImageHost/StillImageHost.c b/Demos/Host/StillImageHost/StillImageHost.c index 50b2054df..787629c3b 100644 --- a/Demos/Host/StillImageHost/StillImageHost.c +++ b/Demos/Host/StillImageHost/StillImageHost.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Still Image Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -165,7 +165,7 @@ TASK(USB_SImage_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if (USB_Host_SendControlRequest(NULL) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control error.\r\n"));
@@ -223,7 +223,7 @@ TASK(USB_SImage_Host) /* Send the GETDEVICEINFO block */
SImage_SendBlockHeader();
- /* Recieve the response data block */
+ /* Receive the response data block */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
{
ShowCommandError(ErrorCode, false);
@@ -274,7 +274,7 @@ TASK(USB_SImage_Host) UnicodeToASCII(DeviceInfoPos, DeviceVersion);
printf_P(PSTR(" Device Version: %s\r\n"), DeviceVersion);
- /* Recieve the final response block from the device */
+ /* Receive the final response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
{
ShowCommandError(ErrorCode, false);
@@ -302,7 +302,7 @@ TASK(USB_SImage_Host) /* Send the OPENSESSION block, open a session with an ID of 0x0001 */
SImage_SendBlockHeader();
- /* Recieve the response block from the device */
+ /* Receive the response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
{
ShowCommandError(ErrorCode, false);
@@ -330,7 +330,7 @@ TASK(USB_SImage_Host) /* Send the CLOSESESSION block, close the session with an ID of 0x0001 */
SImage_SendBlockHeader();
- /* Recieve the response block from the device */
+ /* Receive the response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
{
ShowCommandError(ErrorCode, false);
diff --git a/Demos/OTG/TestApp/Descriptors.c b/Demos/OTG/TestApp/Descriptors.c index fc56660be..d5155678b 100644 --- a/Demos/OTG/TestApp/Descriptors.c +++ b/Demos/OTG/TestApp/Descriptors.c @@ -140,7 +140,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/OTG/TestApp/TestApp.c b/Demos/OTG/TestApp/TestApp.c index a66a728c9..49fdf6782 100644 --- a/Demos/OTG/TestApp/TestApp.c +++ b/Demos/OTG/TestApp/TestApp.c @@ -80,7 +80,7 @@ int main(void) /* Turn on interrupts */
sei();
- /* Startup message via USART */
+ /* Start-up message via USART */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"LUFA Demo running.\r\n" ESC_INVERSE_OFF));
@@ -130,7 +130,7 @@ TASK(TestApp_CheckJoystick) */
TASK(TestApp_CheckTemp)
{
- static SchedulerDelayCounter_t DelayCounter = 10000; // Force immediate run on startup
+ static SchedulerDelayCounter_t DelayCounter = 10000; // Force immediate run on start-up
/* Task runs every 10000 ticks, 10 seconds for this demo */
if (Scheduler_HasDelayElapsed(10000, &DelayCounter))
@@ -161,7 +161,7 @@ TASK(TestApp_CheckHWB) /* Set flag, indicating that current pressed state has been handled */
IsPressed = true;
- /* First start of the USB interface permenantly blocks the joystick task */
+ /* First start of the USB interface permanently blocks the joystick task */
if (BlockingJoystickTask == false)
{
Scheduler_SetTaskMode(TestApp_CheckJoystick, TASK_STOP);
diff --git a/LUFA/ChangeLog.txt b/LUFA/ChangeLog.txt index 4365350ca..036e0314c 100644 --- a/LUFA/ChangeLog.txt +++ b/LUFA/ChangeLog.txt @@ -13,6 +13,7 @@ * - KeyboardHost, MouseHost and GenericHIDHost demos now save and restore the currently selected pipe inside the pipe ISR
* - Changed GenericHID device demo to use the LUFA scheduler, added INTERRUPT_DATA_ENDPOINT and INTERRUPT_CONTROL_ENDPOINT compile
* time options
+ * - All comments in the library, bootloaders, demos and projects have now been spell-checked and spelling mistakes/typos corrected
*
* \section Sec_ChangeLog090401 Version 090401
*
diff --git a/LUFA/Common/Common.h b/LUFA/Common/Common.h index ed2d1bc90..36d9e3f6f 100644 --- a/LUFA/Common/Common.h +++ b/LUFA/Common/Common.h @@ -31,7 +31,7 @@ /** \file
*
* This file contains macros which are common to all library elements, and which may be useful in user code. It
- * also includes other common headees, such as Atomic.h, FunctionAttributes.h and BoardTypes.h.
+ * also includes other common headers, such as Atomic.h, FunctionAttributes.h and BoardTypes.h.
*/
#ifndef __COMMON_H__
@@ -49,27 +49,27 @@ /* Public Interface - May be used in end-application: */
/* Macros: */
- /** Macro for encasing other multi-statment macros. This should be used along with an opening brace
+ /** Macro for encasing other multi-statement macros. This should be used along with an opening brace
* before the start of any multi-statement macro, so that the macros contents as a whole are treated
- * as a discreete block and not as a list of seperate statements which may cause problems when used as
- * a block (such as inline IF statments).
+ * as a discrete block and not as a list of separate statements which may cause problems when used as
+ * a block (such as inline IF statements).
*/
#define MACROS do
- /** Macro for encasing other multi-statment macros. This should be used along with a preceeding closing
+ /** Macro for encasing other multi-statement macros. This should be used along with a preceding closing
* brace at the end of any multi-statement macro, so that the macros contents as a whole are treated
- * as a discreete block and not as a list of seperate statements which may cause problems when used as
- * a block (such as inline IF statments).
+ * as a discrete block and not as a list of separate statements which may cause problems when used as
+ * a block (such as inline IF statements).
*/
#define MACROE while (0)
- /** Defines a volatile NOP statment which cannot be optimized out by the compiler, and thus can always
+ /** Defines a volatile NOP statement which cannot be optimized out by the compiler, and thus can always
* be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimizer
* removes/reorders code to the point where break points cannot reliably be set.
*/
#define JTAG_DEBUG_POINT() asm volatile ("NOP" ::)
- /** Defines an explicit JTAG break point in the resulting binary via the ASM BREAK statment. When
+ /** Defines an explicit JTAG break point in the resulting binary via the ASM BREAK statement. When
* a JTAG is used, this causes the program execution to halt when reached until manually resumed. */
#define JTAG_DEBUG_BREAK() asm volatile ("BREAK" ::)
diff --git a/LUFA/Common/FunctionAttributes.h b/LUFA/Common/FunctionAttributes.h index daa6c4a26..cd406734d 100644 --- a/LUFA/Common/FunctionAttributes.h +++ b/LUFA/Common/FunctionAttributes.h @@ -32,7 +32,7 @@ *
* This file contains macros for applying GCC specific attributes to functions to control various optimizer
* and code generation features of the compiler. Attributes may be placed in the function prototype in any
- * order, and multiple attributes can be specified for a single function via a space seperated list.
+ * order, and multiple attributes can be specified for a single function via a space separated list.
*
* \note Do not include this file directly, rather include the Common.h header file instead to gain this file's
* functionality.
@@ -49,11 +49,11 @@ /* Public Interface - May be used in end-application: */
/* Macros: */
/** Indicates to the compiler that the function can not ever return, so that any stack restoring or
- * return code may be ommited by the compiler in the resulting binary.
+ * return code may be omitted by the compiler in the resulting binary.
*/
#define ATTR_NO_RETURN __attribute__ ((noreturn))
- /** Places the function in one of the initilization sections, which execute before the main function
+ /** Places the function in one of the initialization sections, which execute before the main function
* of the application. The init function number can be specified as "x", as an integer. Refer to the
* avr-libc manual for more information on the initialization sections.
*/
@@ -65,12 +65,12 @@ #define ATTR_WARN_UNUSED_RESULT __attribute__ ((warn_unused_result))
/** Indicates that the specified parameters of the function are pointers which should never be NULL.
- * When applied as a 1-based comma seperated list the compiler will emmit a warning if the specified
+ * When applied as a 1-based comma separated list the compiler will emit a warning if the specified
* parameters are known at compiler time to be NULL at the point of calling the function.
*/
#define ATTR_NON_NULL_PTR_ARG(...) __attribute__ ((nonnull (__VA_ARGS__)))
- /** Removes any preample or postample from the function. When used, the function will not have any
+ /** Removes any preamble or postamble from the function. When used, the function will not have any
* register or stack saving code. This should be used with caution, and when used the programmer
* is responsible for maintaining stack and register integrity.
*/
diff --git a/LUFA/DriverStubs/Joystick.h b/LUFA/DriverStubs/Joystick.h index 415976a46..ca80672b3 100644 --- a/LUFA/DriverStubs/Joystick.h +++ b/LUFA/DriverStubs/Joystick.h @@ -81,7 +81,7 @@ #if !defined(__DOXYGEN__)
static inline void Joystick_Init(void)
{
- // TODO: Initialize joystick port pins as inputs with pullups
+ // TODO: Initialize joystick port pins as inputs with pull-ups
};
static inline uint8_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
diff --git a/LUFA/Drivers/Board/HWB.h b/LUFA/Drivers/Board/HWB.h index 43aac9b5c..6ad2fa821 100644 --- a/LUFA/Drivers/Board/HWB.h +++ b/LUFA/Drivers/Board/HWB.h @@ -68,7 +68,7 @@ #error The selected board does not contain a HWB.
#endif
- /* Psudo-Functions for Doxygen: */
+ /* Pseudo-Functions for Doxygen: */
#if defined(__DOXYGEN__)
/** Initializes the HWB driver, so that the current button position can be read. This sets the appropriate
* I/O pin to an input with pull-up enabled.
diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h index 1f57e62c3..a3f70b8a4 100644 --- a/LUFA/Drivers/Board/Joystick.h +++ b/LUFA/Drivers/Board/Joystick.h @@ -66,7 +66,7 @@ #error The selected board does not contain a joystick.
#endif
- /* Psudo-Functions for Doxygen: */
+ /* Pseudo-Functions for Doxygen: */
#if defined(__DOXYGEN__)
/** Initializes the joystick driver so that the joystick position can be read. This sets the appropriate
* I/O pins to inputs with their pull-ups enabled.
diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h index cda15a421..03e0db5e8 100644 --- a/LUFA/Drivers/Board/LEDs.h +++ b/LUFA/Drivers/Board/LEDs.h @@ -68,7 +68,7 @@ #include "Board/LEDs.h"
#endif
- /* Psudo-Functions for Doxygen: */
+ /* Pseudo-Functions for Doxygen: */
#if defined(__DOXYGEN__)
/** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port
* I/O pins as outputs, and sets the LEDs to default to off.
diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h index c205093a8..17b8acfe1 100644 --- a/LUFA/Drivers/Board/Temperature.h +++ b/LUFA/Drivers/Board/Temperature.h @@ -72,16 +72,16 @@ /** Initializes the temperature sensor driver, including setting up the appropriate ADC channel.
* This must be called before any other temperature sensor routines.
*
- * The ADC itself (not the ADC channel) must be configured seperately before calling the temperature
+ * The ADC itself (not the ADC channel) must be configured separately before calling the temperature
* sensor functions.
*/
#define Temperature_Init() ADC_SetupChannel(TEMP_ADC_CHANNEL);
/* Function Prototypes: */
/** Performs a complete ADC on the temperature sensor channel, and converts the result into a
- * valid temperature between TEMP_MIN_TEMP and TEMP_MAX_TEMP in degrees Celcius.
+ * valid temperature between TEMP_MIN_TEMP and TEMP_MAX_TEMP in degrees Celsius.
*
- * \return Signed temperature in degrees Celcius
+ * \return Signed temperature in degrees Celsius
*/
int8_t Temperature_GetTemperature(void) ATTR_WARN_UNUSED_RESULT;
diff --git a/LUFA/Drivers/USB/Class/ConfigDescriptor.h b/LUFA/Drivers/USB/Class/ConfigDescriptor.h index d1f8927f8..d42b71cce 100644 --- a/LUFA/Drivers/USB/Class/ConfigDescriptor.h +++ b/LUFA/Drivers/USB/Class/ConfigDescriptor.h @@ -97,13 +97,13 @@ #define DESCRIPTOR_SIZE(DescriptorPtr) DESCRIPTOR_CAST(DescriptorPtr, USB_Descriptor_Header_t).bLength
#endif
- /** Creates a prototype for or begins a descriptor comparitor routine. Descriptor comparitor routines are
+ /** Creates a prototype for or begins a descriptor comparator routine. Descriptor comparator routines are
* small search routines which are passed a pointer to the current sub descriptor in the configuration
* descriptor, and which analyse the sub descriptor to determine whether or not it matches the routine's
- * search parameters. Comparitor routines provide a powerful way to scan through the config descriptor
+ * search parameters. Comparator routines provide a powerful way to scan through the config descriptor
* for certain descriptors matching unique criteria.
*
- * Comparitor routines are passed in a single pointer named CurrentDescriptor, and should return a value
+ * Comparator routines are passed in a single pointer named CurrentDescriptor, and should return a value
* of a member of the DSEARCH_Return_ErrorCodes_t enum.
*/
#define DESCRIPTOR_COMPARATOR(name) uint8_t DCOMP_##name (void* const CurrentDescriptor)
@@ -117,7 +117,7 @@ *
* \param DSize Pointer to an int storing the remaining bytes in the configuration descriptor
* \param DPos Pointer to the current position in the configuration descriptor
- * \param DSearch Name of the comparitor search function to use on the configuration descriptor
+ * \param DSearch Name of the comparator search function to use on the configuration descriptor
*
* \return Value of one of the members of the DSEARCH_Comp_Return_ErrorCodes_t enum
*
@@ -156,7 +156,7 @@ /** Enum for return values of USB_Host_GetNextDescriptorComp() */
enum DSEARCH_Comp_Return_ErrorCodes_t
{
- Descriptor_Search_Comp_Found = 0, /**< Configuration descriptor now points to decriptor which matches
+ Descriptor_Search_Comp_Found = 0, /**< Configuration descriptor now points to descriptor which matches
* search criteria of the given comparator function. */
Descriptor_Search_Comp_Fail = 1, /**< Comparator function returned Descriptor_Search_Fail. */
Descriptor_Search_Comp_EndOfDescriptor = 2, /**< End of configuration descriptor reached before match found. */
diff --git a/LUFA/Drivers/USB/Class/HIDParser.h b/LUFA/Drivers/USB/Class/HIDParser.h index 314d08072..47a678b9b 100644 --- a/LUFA/Drivers/USB/Class/HIDParser.h +++ b/LUFA/Drivers/USB/Class/HIDParser.h @@ -220,7 +220,7 @@ bool GetReportItemInfo(const uint8_t* ReportData, HID_ReportItem_t* const ReportItem)
ATTR_NON_NULL_PTR_ARG(1, 2);
- /** Retreives the given report item's value out of the Value member of the report item's
+ /** Retrieves the given report item's value out of the Value member of the report item's
* HID_ReportItem_t structure and places it into the correct position in the HID report
* buffer. The report buffer is assumed to have the appropriate bits cleared before calling
* this function (i.e., the buffer should be explicitly cleared before report values are added).
diff --git a/LUFA/Drivers/USB/Class/HIDReportData.h b/LUFA/Drivers/USB/Class/HIDReportData.h index 1bb8676d7..0961cd40c 100644 --- a/LUFA/Drivers/USB/Class/HIDReportData.h +++ b/LUFA/Drivers/USB/Class/HIDReportData.h @@ -84,7 +84,7 @@ /** HID_ReportItem_t.ItemFlags flag for buffered bytes. */
#define IOF_BUFFEREDBYTES (1 << 8)
- /** HID_ReportItem_t.ItemFlags flag for bitfield data. */
+ /** HID_ReportItem_t.ItemFlags flag for bit field data. */
#define IOF_BITFIELD (0 << 8)
/* Private Interface - For use in library only: */
diff --git a/LUFA/Drivers/USB/HighLevel/Events.h b/LUFA/Drivers/USB/HighLevel/Events.h index eeb0ed37a..d53cd8eb0 100644 --- a/LUFA/Drivers/USB/HighLevel/Events.h +++ b/LUFA/Drivers/USB/HighLevel/Events.h @@ -58,7 +58,7 @@ /* Macros: */
/** Raises a given event name, with the specified parameters. For events with no parameters the
* only argument to the macro is the event name, events with parameters list the parameter values
- * after the name as a comma seperated list.
+ * after the name as a comma separated list.
*
* When a given event is fired, its corresponding event handler code is executed.
*
@@ -75,7 +75,7 @@ */
#define RAISE_EVENT(e, ...) Event_ ## e (__VA_ARGS__)
- /** Indicates that a given module can raise a given event. This is the equivelent of putting the
+ /** Indicates that a given module can raise a given event. This is the equivalent of putting the
* event function's prototype into the module, but in a cleaner way. Each event which may be
* fired via the RAISE_EVENT macro in the module should have an accompanying RAISES_EVENT
* prototype in the module's header file.
@@ -100,7 +100,7 @@ *
* Only one event handler may be defined in any user project for each individual event. Events may
* or may not have parameters - for each event, refer to its documentation elsewhere in this module
- * to determine the presense and purpose of any event parameters.
+ * to determine the presence and purpose of any event parameters.
*
* Usage Example:
* \code
@@ -115,7 +115,7 @@ */
#define EVENT_HANDLER(e) void Event_ ## e e ## _P
- /** Indicates that a given module handles an event. This is the equivelent of putting the
+ /** Indicates that a given module handles an event. This is the equivalent of putting the
* event function's prototype into the module, but in a cleaner way. Each event which may be
* handled via the EVENT_HANDLER macro in the module should have an accompanying HANDLES_EVENT
* prototype in the module's header file.
@@ -136,7 +136,7 @@ */
#define HANDLES_EVENT(e) EVENT_HANDLER(e)
- /* Psudo-Functions for Doxygen: */
+ /* Pseudo-Functions for Doxygen: */
#if defined(__DOXYGEN__)
/** Event for VBUS level change. This event fires when the VBUS line of the USB AVR changes from
* high to low or vice-versa.
@@ -165,7 +165,7 @@ * has been attached (but not yet fully enumerated), or when in device mode and the device is connected
* to a host, beginning the enumeration process.
*
- * When in device mode, this can be used to progmatically start the USB management task to reduce
+ * When in device mode, this can be used to programmatically start the USB management task to reduce
* CPU usage.
*
* \note For the smaller USB AVRs (AT90USBXX2) with limited USB controllers, VBUS is not available to the USB controller.
@@ -183,7 +183,7 @@ * attached and enumerated device has been disconnected, or when in device mode and the device is
* disconnected from the host.
*
- * When in device mode, this can be used to progmatically stop the USB management task to reduce
+ * When in device mode, this can be used to programmatically stop the USB management task to reduce
* CPU usage.
*
* \note For the smaller USB AVRs (AT90USBXX2) with limited USB controllers, VBUS is not available to the USB controller.
@@ -231,7 +231,7 @@ /** Event for USB device attachment. This event fires when a the USB interface is in host mode, and
* a USB device has been connected to the USB interface. This is interrupt driven, thus fires before
- * the standard USB_DeviceConnect event and so can be used to programatically start the USB management
+ * the standard USB_DeviceConnect event and so can be used to programmatically start the USB management
* task to reduce CPU consumption.
*
* \note This event only exists on USB AVR models which supports host mode.
@@ -245,7 +245,7 @@ /** Event for USB device removal. This event fires when a the USB interface is in host mode, and
* a USB device has been removed the USB interface whether or not it has been enumerated. This
- * can be used to programatically stop the USB management task to reduce CPU consumption.
+ * can be used to programmatically stop the USB management task to reduce CPU consumption.
*
* \note This event only exists on USB AVR models which supports host mode.
*
diff --git a/LUFA/Drivers/USB/HighLevel/StdDescriptors.h b/LUFA/Drivers/USB/HighLevel/StdDescriptors.h index 3090d8c24..491e817a9 100644 --- a/LUFA/Drivers/USB/HighLevel/StdDescriptors.h +++ b/LUFA/Drivers/USB/HighLevel/StdDescriptors.h @@ -31,7 +31,7 @@ /** \file
*
* Standard USB device descriptor defines and retrieval routines, for USB devices. This module contains
- * strucutures and macros for the easy creation of standard USB descriptors in USB device projects.
+ * structures and macros for the easy creation of standard USB descriptors in USB device projects.
*
* All standard descriptors have their elements named in an identical manner to the official USB specification,
* however slightly more verbose alternate (non-standard) names are also supplied if the macro
@@ -245,7 +245,7 @@ uint16_t ReleaseNumber; /**< Product release (version) number. */
uint8_t ManufacturerStrIndex; /**< String index for the manufacturer's name. The
- * host will request this string via a seperate
+ * host will request this string via a separate
* control request for the string descriptor.
*
* \note If no string supplied, use NO_DESCRIPTOR.
@@ -255,7 +255,7 @@ * \see ManufacturerStrIndex structure entry.
*/
uint8_t SerialNumStrIndex; /**< String index for the product's globally unique hexadecimal
- * serial number, in uppercase Unicoded ASCII.
+ * serial number, in uppercase Unicode ASCII.
*
* \see ManufacturerStrIndex structure entry.
*/
@@ -363,7 +363,7 @@ /** Type define for a standard interface association descriptor.
*
- * This descriptor has been added as a suppliment to the USB2.0 standard, in the ECN located at
+ * This descriptor has been added as a supplement to the USB2.0 standard, in the ECN located at
* <a>http://www.usb.org/developers/docs/InterfaceAssociationDescriptor_ecn.pdf</a>. It allows compound
* devices with multiple interfaces related to the same function to have the multiple interfaces bound
* together at the point of enumeration, loading one generic driver for all the interfaces in the single
@@ -425,7 +425,7 @@ * maximum packet size that the endpoint can receive at a time.
*/
- uint8_t PollingIntervalMS; /**< Polling interval in milliseconds for the endpont
+ uint8_t PollingIntervalMS; /**< Polling interval in milliseconds for the endpoint
* if it is an INTERRUPT or ISOCHRONOUS type.
*/
#else
diff --git a/LUFA/Drivers/USB/HighLevel/USBInterrupt.h b/LUFA/Drivers/USB/HighLevel/USBInterrupt.h index 8438a589e..20b89eba1 100644 --- a/LUFA/Drivers/USB/HighLevel/USBInterrupt.h +++ b/LUFA/Drivers/USB/HighLevel/USBInterrupt.h @@ -79,7 +79,7 @@ #define USB_INT_IsEnabled(int) ((USB_INT_GET_EN_REG(int) & USB_INT_GET_EN_MASK(int)) ? true : false)
/** Returns boolean true if the given interrupt flag is set (i.e. the condition for the interrupt has occurred,
- * but the interrupt vector is not neccesarily enabled), otherwise returns false.
+ * but the interrupt vector is not necessarily enabled), otherwise returns false.
*/
#define USB_INT_HasOccurred(int) ((USB_INT_GET_INT_REG(int) & USB_INT_GET_INT_MASK(int)) ? true : false)
diff --git a/LUFA/Drivers/USB/HighLevel/USBTask.h b/LUFA/Drivers/USB/HighLevel/USBTask.h index 5bbd4f92e..c8180f588 100644 --- a/LUFA/Drivers/USB/HighLevel/USBTask.h +++ b/LUFA/Drivers/USB/HighLevel/USBTask.h @@ -76,7 +76,7 @@ */
extern volatile bool USB_IsConnected;
- /** Indicates if the USB interface is currently initialized but not neccesarily connected to a host
+ /** Indicates if the USB interface is currently initialized but not necessarily connected to a host
* or device (i.e. if USB_Init() has been run). If this is false, all other library globals are invalid.
*
* \note This variable should be treated as read-only in the user application, and never manually
@@ -166,10 +166,10 @@ * The USB task must be serviced within 50mS in all modes, when needed. The task may be serviced
* at all times, or (for minimum CPU consumption):
*
- * - In device mode, it may be disabled at startup, enabled on the firing of the USB_Connect event
+ * - In device mode, it may be disabled at start-up, enabled on the firing of the USB_Connect event
* and disabled again on the firing of the USB_Disconnect event.
*
- * - In host mode, it may be disabled at startup, enabled on the firing of the USB_DeviceAttached
+ * - In host mode, it may be disabled at start-up, enabled on the firing of the USB_DeviceAttached
* event and disabled again on the firing of the USB_DeviceUnattached event.
*
* \see Events.h for more information on the USB events.
diff --git a/LUFA/Drivers/USB/LowLevel/Device.h b/LUFA/Drivers/USB/LowLevel/Device.h index 187fccb4a..c6e5f7f5a 100644 --- a/LUFA/Drivers/USB/LowLevel/Device.h +++ b/LUFA/Drivers/USB/LowLevel/Device.h @@ -94,7 +94,7 @@ /** Indicates if the device is currently suspended by the host. While suspended, the device is
* to enter a low power state until resumed by the host. While suspended no USB traffic to or
- * from the device can ocurr (except for Remote Wakeup requests).
+ * from the device can occur (except for Remote Wakeup requests).
*
* This macro returns true if the USB communications have been suspended by the host, false
* otherwise.
diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.h b/LUFA/Drivers/USB/LowLevel/Endpoint.h index c6aece708..8c22bb7f7 100644 --- a/LUFA/Drivers/USB/LowLevel/Endpoint.h +++ b/LUFA/Drivers/USB/LowLevel/Endpoint.h @@ -32,7 +32,7 @@ *
* Functions, macros and enums related to endpoint management when in USB Device mode. This
* module contains the endpoint management macros, as well as endpoint interrupt and data
- * send/recieve functions for various datatypes.
+ * send/recieve functions for various data types.
*/
#ifndef __ENDPOINT_H__
@@ -210,7 +210,7 @@ /** Returns true if the currently selected endpoint may be read from (if data is waiting in the endpoint
* bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an
- * IN direction). This function will return false if an error has occured in the endpoint, or if
+ * IN direction). This function will return false if an error has occurred in the endpoint, or if
* the endpoint is an OUT direction and no packet has been received, or if the endpoint is an IN
* direction and the endpoint bank is full.
*/
@@ -262,10 +262,10 @@ */
#define Endpoint_ClearSetupOUT() MACROS{ UEINTX &= ~(1 << RXOUTI); }MACROE
- /** Stalls the current endpoint, indicating to the host that a logical problem occured with the
+ /** Stalls the current endpoint, indicating to the host that a logical problem occurred with the
* indicated endpoint and that the current transfer sequence should be aborted. This provides a
* way for devices to indicate invalid commands to the host so that the current transfer can be
- * aborted and the host can begin its own recovery seqeuence.
+ * aborted and the host can begin its own recovery sequence.
*
* The currently selected endpoint remains stalled until either the Endpoint_ClearStall() macro
* is called, or the host issues a CLEAR FEATURE request to the device for the currently selected
@@ -276,7 +276,7 @@ /** Clears the stall on the currently selected endpoint. */
#define Endpoint_ClearStall() MACROS{ UECONX |= (1 << STALLRQC); }MACROE
- /** Returns true if the currently selected endpoint is stalled, false othewise. */
+ /** Returns true if the currently selected endpoint is stalled, false otherwise. */
#define Endpoint_IsStalled() ((UECONX & (1 << STALLRQ)) ? true : false)
/** Resets the data toggle of the currently selected endpoint. */
@@ -552,12 +552,12 @@ *
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \param Length Number of bytes to send via the currently selected endpoint.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.
*/
@@ -576,13 +576,13 @@ *
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \param Buffer Pointer to the source data buffer to read from.
* \param Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.
*/
@@ -601,13 +601,13 @@ *
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \param Buffer Pointer to the source data buffer to read from.
* \param Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.
*/
@@ -626,13 +626,13 @@ *
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \param Buffer Pointer to the destination data buffer to write to.
* \param Length Number of bytes to send via the currently selected endpoint.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.
*/
@@ -651,13 +651,13 @@ *
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \note This routine should not be used on CONTROL type endpoints.
*
* \param Buffer Pointer to the destination data buffer to write to.
* \param Length Number of bytes to send via the currently selected endpoint.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.
*/
@@ -749,27 +749,27 @@ #define Endpoint_Ignore_DWord() Endpoint_Discard_DWord()
/** Alias for Endpoint_Read_Word_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Endpoint_Read_Word() Endpoint_Read_Word_LE()
/** Alias for Endpoint_Write_Word_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Endpoint_Write_Word(Word) Endpoint_Write_Word_LE(Word)
/** Alias for Endpoint_Read_DWord_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Endpoint_Read_DWord() Endpoint_Read_DWord_LE()
/** Alias for Endpoint_Write_DWord_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Endpoint_Write_DWord(DWord) Endpoint_Write_DWord_LE(DWord)
/** Alias for Endpoint_Read_Stream_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#if !defined(NO_STREAM_CALLBACKS)
#define Endpoint_Read_Stream(Buffer, Length, Callback) Endpoint_Read_Stream_LE(Buffer, Length, Callback)
@@ -778,7 +778,7 @@ #endif
/** Alias for Endpoint_Write_Stream_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#if !defined(NO_STREAM_CALLBACKS)
#define Endpoint_Write_Stream(Buffer, Length, Callback) Endpoint_Write_Stream_LE(Buffer, Length, Callback)
@@ -787,12 +787,12 @@ #endif
/** Alias for Endpoint_Read_Control_Stream_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Endpoint_Read_Control_Stream(Data, Length) Endpoint_Read_Control_Stream_LE(Data, Length)
/** Alias for Endpoint_Write_Control_Stream_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Endpoint_Write_Control_Stream(Data, Length) Endpoint_Write_Control_Stream_LE(Data, Length)
diff --git a/LUFA/Drivers/USB/LowLevel/Host.c b/LUFA/Drivers/USB/LowLevel/Host.c index 7acbffe71..04b06b3da 100644 --- a/LUFA/Drivers/USB/LowLevel/Host.c +++ b/LUFA/Drivers/USB/LowLevel/Host.c @@ -93,8 +93,8 @@ void USB_Host_ResetDevice(void) for (uint8_t MSRem = 10; MSRem != 0; MSRem--)
{
- /* Workaround for powerless-pullup devices. After a USB bus reset,
- all disconnection interrupts are supressed while a USB frame is
+ /* Workaround for powerless-pull-up devices. After a USB bus reset,
+ all disconnection interrupts are suppressed while a USB frame is
looked for - if it is found within 10ms, the device is still
present. */
diff --git a/LUFA/Drivers/USB/LowLevel/Host.h b/LUFA/Drivers/USB/LowLevel/Host.h index 5cc215454..427ed85ee 100644 --- a/LUFA/Drivers/USB/LowLevel/Host.h +++ b/LUFA/Drivers/USB/LowLevel/Host.h @@ -102,7 +102,7 @@ */
#define USB_Host_ResumeBus() MACROS{ UHCON |= (1 << SOFEN); }MACROE
- /** Suspends the USB bus, preventing any communications from occuring between the host and attached
+ /** Suspends the USB bus, preventing any communications from occurring between the host and attached
* device until the bus has been resumed. This stops the transmission of the 1MS Start Of Frame
* messages to the device.
*/
@@ -192,14 +192,14 @@ * event.
*/
HOST_ENUMERROR_WaitStage = 1, /**< One of the delays between enumeration steps failed
- * to complete successfuly, due to a timeout or other
+ * to complete successfully, due to a timeout or other
* error.
*/
HOST_ENUMERROR_NoDeviceDetected = 2, /**< No device was detected, despite the USB data lines
* indicating the attachment of a device.
*/
HOST_ENUMERROR_ControlError = 3, /**< One of the enumeration control requests failed to
- * complete successfuly.
+ * complete successfully.
*/
HOST_ENUMERROR_PipeConfigError = 4, /**< The default control pipe (address 0) failed to
* configure correctly.
diff --git a/LUFA/Drivers/USB/LowLevel/HostChapter9.h b/LUFA/Drivers/USB/LowLevel/HostChapter9.h index 1ca4343a9..4e4fa4f08 100644 --- a/LUFA/Drivers/USB/LowLevel/HostChapter9.h +++ b/LUFA/Drivers/USB/LowLevel/HostChapter9.h @@ -77,7 +77,7 @@ HOST_SENDCONTROL_DeviceDisconnect = 1, /**< The attached device was disconnected during the
* request transfer.
*/
- HOST_SENDCONTROL_PipeError = 2, /**< An error occured in the pipe while sending the request. */
+ HOST_SENDCONTROL_PipeError = 2, /**< An error occurred in the pipe while sending the request. */
HOST_SENDCONTROL_SetupStalled = 3, /**< The attached device stalled the request, usually
* indicating that the request is unsupported on the device.
*/
diff --git a/LUFA/Drivers/USB/LowLevel/OTG.h b/LUFA/Drivers/USB/LowLevel/OTG.h index e1a92f1eb..88a955403 100644 --- a/LUFA/Drivers/USB/LowLevel/OTG.h +++ b/LUFA/Drivers/USB/LowLevel/OTG.h @@ -82,7 +82,7 @@ * host mode indicates that VBUS should be applied and a session started.
*
* There are two different methods of sending a SRP - either pulses on the VBUS line, or by
- * pulsing the Data + line via the internal pullup resistor. The SRP mode is given as the
+ * pulsing the Data + line via the internal pull-up resistor. The SRP mode is given as the
* "type" parameter, and can be either USB_OTG_SRP_VBUS or USB_OTG_STP_DATA.
*/
#define USB_OTG_DEV_Initiate_SRP(type) MACROS{ OTGCON = ((OTGCON & ~(1 << SRPSEL)) | (type | (1 << SRPREQ))); }MACROE
diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h index df3ac7ddc..9a59dbca8 100644 --- a/LUFA/Drivers/USB/LowLevel/Pipe.h +++ b/LUFA/Drivers/USB/LowLevel/Pipe.h @@ -32,7 +32,7 @@ *
* Functions, macros and enums related to pipe management when in USB Host mode. This
* module contains the pipe management macros, as well as pipe interrupt and data
- * send/recieve functions for various datatypes.
+ * send/recieve functions for various data types.
*/
#ifndef __PIPE_H__
@@ -303,7 +303,7 @@ /** Returns true if the master pipe error flag is set for the currently selected pipe, indicating that
* some sort of hardware error has occurred on the pipe.
*
- * \see Pipe_GetErrorFlags() macro for information on retreiving the exact error flag.
+ * \see Pipe_GetErrorFlags() macro for information on retrieving the exact error flag.
*/
#define Pipe_IsError() ((UPINTX & (1 << PERRI)) ? true : false)
@@ -311,14 +311,14 @@ * flag for the pipe. */
#define Pipe_ClearErrorFlags() MACROS{ UPERRX = 0; }MACROE
- /** Returns a mask of the hardware error flags which have occured on the currently selected pipe. This
+ /** Returns a mask of the hardware error flags which have occurred on the currently selected pipe. This
* value can then be masked against the PIPE_ERRORFLAG_* masks to determine what error has occurred.
*/
#define Pipe_GetErrorFlags() UPERRX
/** Returns true if the currently selected pipe may be read from (if data is waiting in the pipe
* bank and the pipe is an IN direction, or if the bank is not yet full if the pipe is an OUT
- * direction). This function will return false if an error has occured in the pipe, or if the pipe
+ * direction). This function will return false if an error has occurred in the pipe, or if the pipe
* is an IN direction and no packet has been received, or if the pipe is an OUT direction and the
* pipe bank is full.
*/
@@ -358,9 +358,9 @@ #define Pipe_ClearSetupOUT() MACROS{ UPINTX &= ~(1 << TXOUTI); UPINTX &= ~(1 << FIFOCON); }MACROE
/** Returns true if the device sent a NAK (Negative Acknowledge) in response to the last sent packet on
- * the currently selected pipe. This ocurrs when the host sends a packet to the device, but the device
+ * the currently selected pipe. This occurs when the host sends a packet to the device, but the device
* is not currently ready to handle the packet (i.e. its endpoint banks are full). Once a NAK has been
- * received, it must be cleard using Pipe_ClearNAKReceived() before the previous (or any other) packet
+ * received, it must be cleared using Pipe_ClearNAKReceived() before the previous (or any other) packet
* can be re-sent.
*/
#define Pipe_IsNAKReceived() ((UPINTX & (1 << NAKEDI)) ? true : false)
@@ -607,11 +607,11 @@ *
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \param Buffer Pointer to the source data buffer to read from.
* \param Length Number of bytes to read for the currently selected pipe into the buffer.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.
*/
@@ -629,11 +629,11 @@ *
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \param Buffer Pointer to the source data buffer to read from.
* \param Length Number of bytes to read for the currently selected pipe into the buffer.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.
*/
@@ -651,10 +651,10 @@ *
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \param Length Number of bytes to send via the currently selected pipe.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.
*/
@@ -672,11 +672,11 @@ *
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \param Buffer Pointer to the source data buffer to write to.
* \param Length Number of bytes to read for the currently selected pipe to read from.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.
*/
@@ -694,11 +694,11 @@ *
* The callback routine should be created using the STREAM_CALLBACK() macro. If the token
* NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled
- * and this function has the Callback parameter ommitted.
+ * and this function has the Callback parameter omitted.
*
* \param Buffer Pointer to the source data buffer to write to.
* \param Length Number of bytes to read for the currently selected pipe to read from.
- * \param Callback Name of a callback routine to call between sucessive USB packet transfers, NULL if no callback
+ * \param Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.
*/
@@ -722,27 +722,27 @@ #define Pipe_Ignore_DWord() Pipe_Discard_DWord()
/** Alias for Pipe_Read_Word_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Pipe_Read_Word() Pipe_Read_Word_LE()
/** Alias for Pipe_Write_Word_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Pipe_Write_Word(Word) Pipe_Write_Word_LE(Word)
/** Alias for Pipe_Read_DWord_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Pipe_Read_DWord() Pipe_Read_DWord_LE()
/** Alias for Pipe_Write_DWord_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#define Pipe_Write_DWord(DWord) Pipe_Write_DWord_LE(DWord)
/** Alias for Pipe_Read_Stream_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#if !defined(NO_STREAM_CALLBACKS)
#define Pipe_Read_Stream(Buffer, Length, Callback) Pipe_Read_Stream_LE(Buffer, Length, Callback)
@@ -751,7 +751,7 @@ #endif
/** Alias for Pipe_Write_Stream_LE(). By default USB transfers use little endian format, thus
- * the command with no endianness specifier indicates little endian mode.
+ * the command with no endianness specified indicates little endian mode.
*/
#if !defined(NO_STREAM_CALLBACKS)
#define Pipe_Write_Stream(Buffer, Length, Callback) Pipe_Read_Stream_LE(Buffer, Length, Callback)
diff --git a/LUFA/MemoryAllocator/DynAlloc.h b/LUFA/MemoryAllocator/DynAlloc.h index 6fd743ea3..dba1864cd 100644 --- a/LUFA/MemoryAllocator/DynAlloc.h +++ b/LUFA/MemoryAllocator/DynAlloc.h @@ -45,9 +45,9 @@ * The constants NUM_BLOCKS, BLOCK_SIZE and NUM_HANDLES must be defined in the project makefile (and passed to the
* preprocessor via the -D GCC switch) for this library to compile.
*
- * NUM_BLOCKS indicates the number of memory blocks in the memory psudoheap which can be chaned together and handed
+ * NUM_BLOCKS indicates the number of memory blocks in the memory psudoheap which can be chained together and handed
* to the application via a memory handle. NUM_HANDLES is the maximum number of memory handles (pointing to one or
- * more chained memory blocks) which can be handed out simultaneously before requring a handle (and its associated
+ * more chained memory blocks) which can be handed out simultaneously before requiring a handle (and its associated
* memory) to be freed. BLOCK_SIZE gives the number of bytes in each memory block.
*/
@@ -67,7 +67,7 @@ /* Public Interface - May be used in end-application: */
/* Macros: */
/** Macro to dereference a given memory handle into the given type. The given type should be a pointer
- * if the memory is to contain an array of items, or should be a standard type (such as a primative or
+ * if the memory is to contain an array of items, or should be a standard type (such as a primitive or
* structure) if the memory is to hold a single item of a single type. */
#define DEREF(handle, type) (*(type*)handle)
diff --git a/LUFA/Scheduler/Scheduler.h b/LUFA/Scheduler/Scheduler.h index e536e7137..414b0b291 100644 --- a/LUFA/Scheduler/Scheduler.h +++ b/LUFA/Scheduler/Scheduler.h @@ -30,10 +30,10 @@ /** \file
*
- * Simple round-robbin cooperative scheduler for use in basic projects where non realtime tasks need
+ * Simple round-robbin cooperative scheduler for use in basic projects where non real-time tasks need
* to be executed. Each task is executed in sequence, and can be enabled or disabled individually or as a group.
*
- * For a task to yield it must return, thus each task should have persistant data marked with the static attribute.
+ * For a task to yield it must return, thus each task should have persistent data marked with the static attribute.
*
* Usage Example:
* \code
@@ -126,8 +126,8 @@ #define Scheduler_Start() Scheduler_GoSchedule(TOTAL_TASKS);
/** Initializes the scheduler so that the scheduler functions can be called before the scheduler itself
- * is started. This must be exeucted before any scheduler function calls other than Scheduler_Start(),
- * and can be ommitted if no such functions could be called before the scheduler is started.
+ * is started. This must be executed before any scheduler function calls other than Scheduler_Start(),
+ * and can be omitted if no such functions could be called before the scheduler is started.
*/
#define Scheduler_Init() Scheduler_InitScheduler(TOTAL_TASKS);
@@ -194,7 +194,7 @@ *
* Usage Example:
* \code
- * static SchedulerDelayCounter_t DelayCounter = 10000; // Force immediate run on startup
+ * static SchedulerDelayCounter_t DelayCounter = 10000; // Force immediate run on start-up
*
* // Task runs every 10000 ticks, 10 seconds for this demo
* if (Scheduler_HasDelayElapsed(10000, &DelayCounter))
diff --git a/Projects/Magstripe/CircularBitBuffer.h b/Projects/Magstripe/CircularBitBuffer.h index 71b9e26a7..6f1fa1508 100644 --- a/Projects/Magstripe/CircularBitBuffer.h +++ b/Projects/Magstripe/CircularBitBuffer.h @@ -46,7 +46,7 @@ /* Macros: */
#if (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \
defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__)) || defined(__DOXYGEN__)
- /** Maximum number of bits which can be stored into a bit buffer. The memory usage is one eigth of this value per buffer. */
+ /** Maximum number of bits which can be stored into a bit buffer. The memory usage is one eighth of this value per buffer. */
#define MAX_BITS 8192
#else
#define MAX_BITS 1024
diff --git a/Projects/Magstripe/Descriptors.c b/Projects/Magstripe/Descriptors.c index 71abca666..d5bbeb34d 100644 --- a/Projects/Magstripe/Descriptors.c +++ b/Projects/Magstripe/Descriptors.c @@ -192,7 +192,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Projects/Magstripe/Magstripe.c b/Projects/Magstripe/Magstripe.c index aef7812fa..93681170a 100644 --- a/Projects/Magstripe/Magstripe.c +++ b/Projects/Magstripe/Magstripe.c @@ -78,7 +78,7 @@ BitBuffer_t Track2Data; /** Circular buffer to hold the read bits from track 3 of the inserted magnetic card. */
BitBuffer_t Track3Data;
-/** Delay counter between sucessive key strokes. This is to prevent the OS from ignoring multiple keys in a short
+/** Delay counter between successive key strokes. This is to prevent the OS from ignoring multiple keys in a short
* period of time due to key repeats. Two milliseconds works for most OSes.
*/
uint8_t KeyDelayRemaining;
@@ -312,7 +312,7 @@ bool GetNextReport(USB_KeyboardReport_Data_t* ReportData) /* Set the flag indicating that a null report must eventually be sent to release all pressed keys */
MustRelease = true;
- /* Only send the next key on odd reports, so that they are interpersed with null reports to release keys */
+ /* Only send the next key on odd reports, so that they are interspersed with null reports to release keys */
if (OddReport)
{
/* Set the report key code to the key code for the next data bit */
@@ -337,12 +337,12 @@ bool GetNextReport(USB_KeyboardReport_Data_t* ReportData) return false;
}
-/** Task to read out data from inserted magnetic cards and place the seperate track data into their respective
+/** Task to read out data from inserted magnetic cards and place the separate track data into their respective
* data buffers for later sending to the host as keyboard key presses.
*/
TASK(Magstripe_Read)
{
- /* Arrays to hold the buffer pointers, clock and data bit masks for the seperate card tracks */
+ /* Arrays to hold the buffer pointers, clock and data bit masks for the separate card tracks */
const struct
{
BitBuffer_t* Buffer;
@@ -396,7 +396,7 @@ TASK(Magstripe_Read) }
/** Task for the magnetic card reading and keyboard report generation. This task waits until a card is inserted,
- * then reads off the card data and sends it to the host as a series of keyboard keypresses via keyboard reports.
+ * then reads off the card data and sends it to the host as a series of keyboard key presses via keyboard reports.
*/
TASK(USB_Keyboard_Report)
{
|