diff options
23 files changed, 220 insertions, 6489 deletions
diff --git a/Demos/Keyboard/Descriptors.c b/Demos/Keyboard/Descriptors.c index e11ef6626..545f9611a 100644 --- a/Demos/Keyboard/Descriptors.c +++ b/Demos/Keyboard/Descriptors.c @@ -194,9 +194,9 @@ USB_Descriptor_String_t PROGMEM LanguageString = */
USB_Descriptor_String_t PROGMEM ManufacturerString =
{
- Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String},
+ Header: {Size: USB_STRING_LEN(16), Type: DTYPE_String},
- UnicodeString: L"Dean Camera"
+ UnicodeString: L"Denver Gingerich"
};
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
diff --git a/Demos/Keyboard/Keyboard.c b/Demos/Keyboard/Keyboard.c index 931f08098..3884eeb16 100644 --- a/Demos/Keyboard/Keyboard.c +++ b/Demos/Keyboard/Keyboard.c @@ -31,7 +31,7 @@ /** \file
*
- * Main source file for the Keyboard demo. This file contains the main tasks of the demo and
+ * Main source file for the KeyboardFullInt demo. This file contains the main tasks of the demo and
* is responsible for the initial application hardware configuration.
*/
@@ -46,8 +46,13 @@ BUTTLOADTAG(LUFAVersion, "LUFA V" LUFA_VERSION_STRING); /* Scheduler Task List */
TASK_LIST
{
+ #if !defined(INTERRUPT_CONTROL_ENDPOINT)
{ Task: USB_USBTask , TaskStatus: TASK_STOP },
+ #endif
+
+ #if !defined(INTERRUPT_DATA_ENDPOINT)
{ Task: USB_Keyboard_Report , TaskStatus: TASK_STOP },
+ #endif
};
/* Global Variables */
@@ -69,7 +74,7 @@ uint16_t IdleMSRemaining = 0; /** Main program entry point. This routine configures the hardware required by the application, then
- * starts the scheduler to run the application tasks.
+ * starts the scheduler to run the USB management task.
*/
int main(void)
{
@@ -92,7 +97,7 @@ int main(void) /* Indicate USB not ready */
UpdateStatus(Status_USBNotReady);
-
+
/* Initialize Scheduler so that it can be used */
Scheduler_Init();
@@ -108,29 +113,40 @@ int main(void) */
EVENT_HANDLER(USB_Connect)
{
- /* Start USB management task */
- Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
-
/* Indicate USB enumerating */
UpdateStatus(Status_USBEnumerating);
+
+ /* Default to report protocol on connect */
+ UsingReportProtocol = true;
+}
+
+/** Event handler for the USB_Reset event. This fires when the USB interface is reset by the USB host, before the
+ * enumeration process begins, and enables the control endpoint interrupt so that control requests can be handled
+ * asynchronously when they arrive rather than when the control endpoint is polled manually.
+ */
+EVENT_HANDLER(USB_Reset)
+{
+ #if defined(INTERRUPT_CONTROL_ENDPOINT)
+ /* Select the control endpoint */
+ Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
+
+ /* Enable the endpoint SETUP interrupt ISR for the control endpoint */
+ USB_INT_Enable(ENDPOINT_INT_SETUP);
+ #endif
}
/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- * the status LEDs and stops the USB management and Keyboard reporting tasks.
+ * the status LEDs.
*/
EVENT_HANDLER(USB_Disconnect)
{
- /* Stop running keyboard reporting and USB management tasks */
- Scheduler_SetTaskMode(USB_Keyboard_Report, TASK_STOP);
- Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
-
/* Indicate USB not ready */
UpdateStatus(Status_USBNotReady);
}
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
- * of the USB device after enumeration - the device endpoints are configured and the keyboard reporting task started.
- */
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
+ * of the USB device after enumeration, and configures the keyboard device endpoints.
+ */
EVENT_HANDLER(USB_ConfigurationChanged)
{
/* Setup Keyboard Keycode Report Endpoint */
@@ -138,19 +154,23 @@ EVENT_HANDLER(USB_ConfigurationChanged) ENDPOINT_DIR_IN, KEYBOARD_EPSIZE,
ENDPOINT_BANK_SINGLE);
+ #if defined(INTERRUPT_DATA_ENDPOINT)
+ /* Enable the endpoint IN interrupt ISR for the report endpoint */
+ USB_INT_Enable(ENDPOINT_INT_IN);
+ #endif
+
/* Setup Keyboard LED Report Endpoint */
Endpoint_ConfigureEndpoint(KEYBOARD_LEDS_EPNUM, EP_TYPE_INTERRUPT,
ENDPOINT_DIR_OUT, KEYBOARD_EPSIZE,
ENDPOINT_BANK_SINGLE);
+ #if defined(INTERRUPT_DATA_ENDPOINT)
+ /* Enable the endpoint OUT interrupt ISR for the LED report endpoint */
+ USB_INT_Enable(ENDPOINT_INT_OUT);
+ #endif
+
/* Indicate USB connected and ready */
UpdateStatus(Status_USBReady);
-
- /* Default to report protocol on connect */
- UsingReportProtocol = true;
-
- /* Start Keyboard reporting task */
- Scheduler_SetTaskMode(USB_Keyboard_Report, TASK_RUN);
}
/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific
@@ -168,7 +188,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) USB_KeyboardReport_Data_t KeyboardReportData;
/* Create the next keyboard report for transmission to the host */
- GetNextReport(&KeyboardReportData);
+ CreateKeyboardReport(&KeyboardReportData);
/* Ignore report type and ID number value */
Endpoint_Discard_Word();
@@ -226,7 +246,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Send the flag to the host */
Endpoint_ClearSetupIN();
-
+
/* Acknowledge status stage */
while (!(Endpoint_IsSetupOUTReceived()));
Endpoint_ClearSetupOUT();
@@ -238,12 +258,12 @@ EVENT_HANDLER(USB_UnhandledControlPacket) {
/* Read in the wValue parameter containing the new protocol mode */
uint16_t wValue = Endpoint_Read_Word_LE();
-
+
Endpoint_ClearSetupReceived();
/* Set or clear the flag depending on what the host indicates that the current Protocol should be */
UsingReportProtocol = (wValue != 0x0000);
-
+
/* Acknowledge status stage */
while (!(Endpoint_IsSetupINReady()));
Endpoint_ClearSetupIN();
@@ -303,7 +323,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK) *
* \return Boolean true if the new report differs from the last report, false otherwise
*/
-bool GetNextReport(USB_KeyboardReport_Data_t* ReportData)
+bool CreateKeyboardReport(USB_KeyboardReport_Data_t* ReportData)
{
static uint8_t PrevJoyStatus = 0;
uint8_t JoyStatus_LCL = Joystick_GetStatus();
@@ -335,13 +355,13 @@ bool GetNextReport(USB_KeyboardReport_Data_t* ReportData) return InputChanged;
}
-/** Processes a given LED report mask from the host and sets the board LEDs to match.
+/** Processes a received LED report, and updates the board LEDs states to match.
*
- * \param LEDReport LED mask from the host, containing a mask of what LEDs are set
+ * \param LEDReport LED status report from the host
*/
void ProcessLEDReport(uint8_t LEDReport)
{
- uint8_t LEDMask = LEDS_LED2;
+ uint8_t LEDMask = LEDS_LED2;
if (LEDReport & 0x01) // NUM Lock
LEDMask |= LEDS_LED1;
@@ -356,10 +376,63 @@ void ProcessLEDReport(uint8_t LEDReport) LEDs_SetAllLEDs(LEDMask);
}
+/** Sends the next HID report to the host, via the keyboard data endpoint. */
+static inline void SendNextReport(void)
+{
+ USB_KeyboardReport_Data_t KeyboardReportData;
+ bool SendReport;
+
+ /* Create the next keyboard report for transmission to the host */
+ SendReport = CreateKeyboardReport(&KeyboardReportData);
+
+ /* Check if the idle period is set and has elapsed */
+ if (IdleCount && !(IdleMSRemaining))
+ {
+ /* Idle period elapsed, indicate that a report must be sent */
+ SendReport = true;
+
+ /* Reset the idle time remaining counter, must multiply by 4 to get the duration in milliseconds */
+ IdleMSRemaining = (IdleCount << 2);
+ }
+
+ /* Select the Keyboard Report Endpoint */
+ Endpoint_SelectEndpoint(KEYBOARD_EPNUM);
+
+ /* Check if Keyboard Endpoint Ready for Read/Write, and if we should send a report */
+ if (Endpoint_ReadWriteAllowed() && SendReport)
+ {
+ /* Write Keyboard Report Data */
+ Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData));
+
+ /* Finalize the stream transfer to send the last packet */
+ Endpoint_ClearCurrentBank();
+ }
+}
+
+/** Reads the next LED status report from the host from the LED data endpoint, if one has been sent. */
+static inline void ReceiveNextReport(void)
+{
+ /* Select the Keyboard LED Report Endpoint */
+ Endpoint_SelectEndpoint(KEYBOARD_LEDS_EPNUM);
+
+ /* Check if Keyboard LED Endpoint Ready for Read/Write */
+ if (!(Endpoint_ReadWriteAllowed()))
+ return;
+
+ /* Read in the LED report from the host */
+ uint8_t LEDReport = Endpoint_Read_Byte();
+
+ /* Handshake the OUT Endpoint - clear endpoint and ready for next report */
+ Endpoint_ClearCurrentBank();
+
+ /* Process the read LED report from the host */
+ ProcessLEDReport(LEDReport);
+}
+
/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
* log to a serial port, or anything else that is suitable for status updates.
*
- * \param CurrentStatus Current status of the system, from the Keyboard_StatusCodes_t enum
+ * \param CurrentStatus Current status of the system, from the KeyboardFullInt_StatusCodes_t enum
*/
void UpdateStatus(uint8_t CurrentStatus)
{
@@ -383,55 +456,77 @@ void UpdateStatus(uint8_t CurrentStatus) LEDs_SetAllLEDs(LEDMask);
}
+#if !defined(INTERRUPT_DATA_ENDPOINT)
/** Function to manage HID report generation and transmission to the host, when in report mode. */
TASK(USB_Keyboard_Report)
{
- USB_KeyboardReport_Data_t KeyboardReportData;
- bool SendReport;
-
- /* Create the next keyboard report for transmission to the host */
- SendReport = GetNextReport(&KeyboardReportData);
-
- /* Check if the idle period is set and has elapsed */
- if (IdleCount && !(IdleMSRemaining))
+ /* Check if the USB system is connected to a host */
+ if (USB_IsConnected)
{
- /* Idle period elapsed, indicate that a report must be sent */
- SendReport = true;
+ /* Send the next keypress report to the host */
+ SendNextReport();
- /* Reset the idle time remaining counter, must multiply by 4 to get the duration in milliseconds */
- IdleMSRemaining = (IdleCount << 2);
+ /* Process the LED report sent from the host */
+ ReceiveNextReport();
}
-
- /* Check if the USB system is connected to a host */
- if (USB_IsConnected)
+}
+#endif
+
+/** ISR for the general Pipe/Endpoint interrupt vector. This ISR fires when an endpoint's status changes (such as
+ * a packet has been received) on an endpoint with its corresponding ISR enabling bits set. This is used to send
+ * HID packets to the host each time the HID interrupt endpoints polling period elapses, as managed by the USB
+ * controller. It is also used to respond to standard and class specific requests send to the device on the control
+ * endpoint, by handing them off to the LUFA library when they are received.
+ */
+ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
+{
+ #if defined(INTERRUPT_CONTROL_ENDPOINT)
+ /* Check if the control endpoint has received a request */
+ if (Endpoint_HasEndpointInterrupted(ENDPOINT_CONTROLEP))
+ {
+ /* Clear the endpoint interrupt */
+ Endpoint_ClearEndpointInterrupt(ENDPOINT_CONTROLEP);
+
+ /* Process the control request */
+ USB_USBTask();
+
+ /* Handshake the endpoint setup interrupt - must be after the call to USB_USBTask() */
+ USB_INT_Clear(ENDPOINT_INT_SETUP);
+ }
+ #endif
+
+ #if defined(INTERRUPT_DATA_ENDPOINT)
+ /* Check if keyboard endpoint has interrupted */
+ if (Endpoint_HasEndpointInterrupted(KEYBOARD_EPNUM))
{
/* Select the Keyboard Report Endpoint */
Endpoint_SelectEndpoint(KEYBOARD_EPNUM);
- /* Check if Keyboard Endpoint Ready for Read/Write, and if we should send a report */
- if (Endpoint_ReadWriteAllowed() && SendReport)
- {
- /* Write Keyboard Report Data */
- Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData));
+ /* Clear the endpoint IN interrupt flag */
+ USB_INT_Clear(ENDPOINT_INT_IN);
+
+ /* Clear the Keyboard Report endpoint interrupt */
+ Endpoint_ClearEndpointInterrupt(KEYBOARD_EPNUM);
- /* Finalize the stream transfer to send the last packet */
- Endpoint_ClearCurrentBank();
- }
+ /* Send the next keypress report to the host */
+ SendNextReport();
+ }
+ /* Check if Keyboard LED status Endpoint has interrupted */
+ if (Endpoint_HasEndpointInterrupted(KEYBOARD_LEDS_EPNUM))
+ {
/* Select the Keyboard LED Report Endpoint */
Endpoint_SelectEndpoint(KEYBOARD_LEDS_EPNUM);
- /* Check if Keyboard LED Endpoint Ready for Read/Write */
- if (Endpoint_ReadWriteAllowed())
- {
- /* Read in the LED report from the host */
- uint8_t LEDStatus = Endpoint_Read_Byte();
+ /* Clear the endpoint OUT interrupt flag */
+ USB_INT_Clear(ENDPOINT_INT_OUT);
- /* Process the incomming LED report */
- ProcessLEDReport(LEDStatus);
+ /* Clear the Keyboard LED Report endpoint interrupt */
+ Endpoint_ClearEndpointInterrupt(KEYBOARD_LEDS_EPNUM);
- /* Handshake the OUT Endpoint - clear endpoint and ready for next report */
- Endpoint_ClearCurrentBank();
- }
+ /* Process the LED report sent from the host */
+ ReceiveNextReport();
}
+ #endif
}
+
diff --git a/Demos/Keyboard/Keyboard.h b/Demos/Keyboard/Keyboard.h index 6988e579a..8b3147c2a 100644 --- a/Demos/Keyboard/Keyboard.h +++ b/Demos/Keyboard/Keyboard.h @@ -9,7 +9,7 @@ /*
Copyright 2009 Denver Gingerich (denver [at] ossguy [dot] com)
Based on code by Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
+
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
@@ -33,7 +33,7 @@ *
* Header file for Keyboard.c.
*/
-
+
#ifndef _KEYBOARD_H_
#define _KEYBOARD_H_
@@ -48,14 +48,11 @@ #include "Descriptors.h"
#include <LUFA/Version.h> // Library Version Information
+ #include <LUFA/Scheduler/Scheduler.h> // Simple scheduler for task management
#include <LUFA/Common/ButtLoadTag.h> // PROGMEM tags readable by the ButtLoad project
#include <LUFA/Drivers/USB/USB.h> // USB Functionality
#include <LUFA/Drivers/Board/Joystick.h> // Joystick driver
#include <LUFA/Drivers/Board/LEDs.h> // LEDs driver
- #include <LUFA/Scheduler/Scheduler.h> // Simple scheduler for task management
-
- /* Task Definitions: */
- TASK(USB_Keyboard_Report);
/* Macros: */
/** HID Class specific request to get the next HID report from the device. */
@@ -76,6 +73,9 @@ /** HID Class specific request to set the current HID protocol in use, either report or boot. */
#define REQ_SetProtocol 0x0B
+ /* Task Definitions: */
+ TASK(USB_Keyboard_Report);
+
/* Type Defines: */
/** Type define for the keyboard HID report structure, for creating and sending HID reports to the host PC.
* This mirrors the layout described to the host in the HID report descriptor, in Descriptors.c.
@@ -103,6 +103,9 @@ /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
HANDLES_EVENT(USB_Disconnect);
+ /** Indicates that this module will catch the USB_Reset event when thrown by the library. */
+ HANDLES_EVENT(USB_Reset);
+
/** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
HANDLES_EVENT(USB_ConfigurationChanged);
@@ -110,8 +113,10 @@ HANDLES_EVENT(USB_UnhandledControlPacket);
/* Function Prototypes: */
- bool GetNextReport(USB_KeyboardReport_Data_t* ReportData);
+ bool CreateKeyboardReport(USB_KeyboardReport_Data_t* ReportData);
void ProcessLEDReport(uint8_t LEDReport);
+ static inline void SendNextReport(void);
+ static inline void ReceiveNextReport(void);
void UpdateStatus(uint8_t CurrentStatus);
#endif
diff --git a/Demos/Keyboard/Keyboard.txt b/Demos/Keyboard/Keyboard.txt index c22772558..7939035a0 100644 --- a/Demos/Keyboard/Keyboard.txt +++ b/Demos/Keyboard/Keyboard.txt @@ -5,18 +5,10 @@ */
/** \mainpage Keyboard Device Demo
- *
- * Keyboard demonstration application. This gives a simple reference
- * application for implementing a USB Keyboard using the basic USB HID
- * drivers in all modern OSes (i.e. no special drivers required). It is
- * boot protocol compatible, and thus works under compatible BIOS as if
- * it was a native keyboard (e.g. PS/2).
- *
- * On startup the system will automatically enumerate and function
- * as a keyboard when the USB connection to a host is present. To use
- * the keyboard example, manipulate the joystick to send the letters
- * a, b, c, d and e. See the USB HID documentation for more information
- * on sending keyboard event and keypresses.
+ *
+ * \section SSec_Info USB Information:
+ *
+ * The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
@@ -40,4 +32,42 @@ * <td>Low Speed Mode, Full Speed Mode</td>
* </tr>
* </table>
+ *
+ * \section SSec_Description Project Description:
+ * Keyboard demonstration application. This gives a simple reference application
+ * for implementing a USB Keyboard using the basic USB HID drivers in all modern
+ * OSes (i.e. no special drivers required). It is boot protocol compatible, and thus
+ * works under compatible BIOS as if it was a native keyboard (e.g. PS/2).
+ *
+ * On startup the system will automatically enumerate and function
+ * as a keyboard when the USB connection to a host is present. To use
+ * the keyboard example, manipulate the joystick to send the letters
+ * a, b, c, d and e. See the USB HID documentation for more information
+ * on sending keyboard event and keypresses.
+ *
+ * \section SSec_Options Project Options
+ *
+ * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ * <table>
+ * <tr>
+ * <td><b>Define Name:</b></td>
+ * <td><b>Location:</b></td>
+ * <td><b>Description:</b></td>
+ * </tr>
+ * <tr>
+ * <td>INTERRUPT_CONTROL_ENDPOINT</td>
+ * <td>Makefile CDEFS</td>
+ * <td>When defined, this causes the demo to enable interrupts for the control endpoint,
+ * which services control requests from the host. If not defined, the control endpoint
+ * is serviced via polling using the task scheduler.</td>
+ * </tr>
+ * <tr>
+ * <td>INTERRUPT_DATA_ENDPOINT</td>
+ * <td>Makefile CDEFS</td>
+ * <td>When defined, this causes the demo to enable interrupts for the data endpoints,
+ * which services incomming LED reports and outgoing key status reports to and from the host.
+ * If not defined, the data endpoints are serviced via polling using the task scheduler.</td>
+ * </tr>
+ * </table>
*/
\ No newline at end of file diff --git a/Demos/KeyboardFullInt/Descriptors.c b/Demos/KeyboardFullInt/Descriptors.c deleted file mode 100644 index 23c4165a6..000000000 --- a/Demos/KeyboardFullInt/Descriptors.c +++ /dev/null @@ -1,267 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Denver Gingerich (denver [at] ossguy [dot] com)
- Based on code by Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- * computer-readable structures which the host requests upon device enumeration, to determine
- * the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- * USBIF HID class specification to describe the reports and capabilities of the HID device. This
- * descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- * the device will send, and what it may be sent back from the host. Refer to the HID specification for
- * more details on HID report descriptors.
- */
-USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
-{
- 0x05, 0x01, /* Usage Page (Generic Desktop) */
- 0x09, 0x06, /* Usage (Keyboard) */
- 0xa1, 0x01, /* Collection (Application) */
- 0x75, 0x01, /* Report Size (1) */
- 0x95, 0x08, /* Report Count (8) */
- 0x05, 0x07, /* Usage Page (Key Codes) */
- 0x19, 0xe0, /* Usage Minimum (Keyboard LeftControl) */
- 0x29, 0xe7, /* Usage Maximum (Keyboard Right GUI) */
- 0x15, 0x00, /* Logical Minimum (0) */
- 0x25, 0x01, /* Logical Maximum (1) */
- 0x81, 0x02, /* Input (Data, Variable, Absolute) */
- 0x95, 0x01, /* Report Count (1) */
- 0x75, 0x08, /* Report Size (8) */
- 0x81, 0x03, /* Input (Const, Variable, Absolute) */
- 0x95, 0x05, /* Report Count (5) */
- 0x75, 0x01, /* Report Size (1) */
- 0x05, 0x08, /* Usage Page (LEDs) */
- 0x19, 0x01, /* Usage Minimum (Num Lock) */
- 0x29, 0x05, /* Usage Maximum (Kana) */
- 0x91, 0x02, /* Output (Data, Variable, Absolute) */
- 0x95, 0x01, /* Report Count (1) */
- 0x75, 0x03, /* Report Size (3) */
- 0x91, 0x03, /* Output (Const, Variable, Absolute) */
- 0x95, 0x06, /* Report Count (6) */
- 0x75, 0x08, /* Report Size (8) */
- 0x15, 0x00, /* Logical Minimum (0) */
- 0x25, 0x65, /* Logical Maximum (101) */
- 0x05, 0x07, /* Usage Page (Keyboard) */
- 0x19, 0x00, /* Usage Minimum (Reserved (no event indicated)) */
- 0x29, 0x65, /* Usage Maximum (Keyboard Application) */
- 0x81, 0x00, /* Input (Data, Array, Absolute) */
- 0xc0 /* End Collection */
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- * device characteristics, including the supported USB version, control endpoint size and the
- * number of device configurations. The descriptor is read out by the USB host when the enumeration
- * process begins.
- */
-USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
- Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
-
- USBSpecification: VERSION_BCD(01.10),
- Class: 0x00,
- SubClass: 0x00,
- Protocol: 0x00,
-
- Endpoint0Size: 8,
-
- VendorID: 0x03EB,
- ProductID: 0x2042,
- ReleaseNumber: 0x0000,
-
- ManufacturerStrIndex: 0x01,
- ProductStrIndex: 0x02,
- SerialNumStrIndex: NO_DESCRIPTOR,
-
- NumberOfConfigurations: 1
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- * of the device in one of its supported configurations, including information about any device interfaces
- * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- * a configuration so that the host may correctly communicate with the USB device.
- */
-USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
- Config:
- {
- Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
-
- TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
- TotalInterfaces: 1,
-
- ConfigurationNumber: 1,
- ConfigurationStrIndex: NO_DESCRIPTOR,
-
- ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
-
- MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
- },
-
- Interface:
- {
- Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
-
- InterfaceNumber: 0x00,
- AlternateSetting: 0x00,
-
- TotalEndpoints: 2,
-
- Class: 0x03,
- SubClass: 0x01,
- Protocol: 0x01,
-
- InterfaceStrIndex: NO_DESCRIPTOR
- },
-
- KeyboardHID:
- {
- Header: {Size: sizeof(USB_Descriptor_HID_t), Type: DTYPE_HID},
-
- HIDSpec: VERSION_BCD(01.11),
- CountryCode: 0x00,
- TotalHIDReports: 0x01,
- HIDReportType: DTYPE_Report,
- HIDReportLength: sizeof(KeyboardReport)
- },
-
- KeyboardEndpoint:
- {
- Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
-
- EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_EPNUM),
- Attributes: EP_TYPE_INTERRUPT,
- EndpointSize: KEYBOARD_EPSIZE,
- PollingIntervalMS: 0x02
- },
-
- KeyboardLEDsEndpoint:
- {
- Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
-
- EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | KEYBOARD_LEDS_EPNUM),
- Attributes: EP_TYPE_INTERRUPT,
- EndpointSize: KEYBOARD_EPSIZE,
- PollingIntervalMS: 0x02
- }
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- * via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-USB_Descriptor_String_t PROGMEM LanguageString =
-{
- Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
-
- UnicodeString: {LANGUAGE_ID_ENG}
-};
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- * Descriptor.
- */
-USB_Descriptor_String_t PROGMEM ManufacturerString =
-{
- Header: {Size: USB_STRING_LEN(16), Type: DTYPE_String},
-
- UnicodeString: L"Denver Gingerich"
-};
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- * Descriptor.
- */
-USB_Descriptor_String_t PROGMEM ProductString =
-{
- Header: {Size: USB_STRING_LEN(18), Type: DTYPE_String},
-
- UnicodeString: L"LUFA Keyboard Demo"
-};
-
-/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
- * documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
- * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- * USB host.
- */
-uint16_t USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
-{
- const uint8_t DescriptorType = (wValue >> 8);
- const uint8_t DescriptorNumber = (wValue & 0xFF);
-
- void* Address = NULL;
- uint16_t Size = NO_DESCRIPTOR;
-
- switch (DescriptorType)
- {
- case DTYPE_Device:
- Address = DESCRIPTOR_ADDRESS(DeviceDescriptor);
- Size = sizeof(USB_Descriptor_Device_t);
- break;
- case DTYPE_Configuration:
- Address = DESCRIPTOR_ADDRESS(ConfigurationDescriptor);
- Size = sizeof(USB_Descriptor_Configuration_t);
- break;
- case DTYPE_String:
- switch (DescriptorNumber)
- {
- case 0x00:
- Address = DESCRIPTOR_ADDRESS(LanguageString);
- Size = pgm_read_byte(&LanguageString.Header.Size);
- break;
- case 0x01:
- Address = DESCRIPTOR_ADDRESS(ManufacturerString);
- Size = pgm_read_byte(&ManufacturerString.Header.Size);
- break;
- case 0x02:
- Address = DESCRIPTOR_ADDRESS(ProductString);
- Size = pgm_read_byte(&ProductString.Header.Size);
- break;
- }
-
- break;
- case DTYPE_HID:
- Address = DESCRIPTOR_ADDRESS(ConfigurationDescriptor.KeyboardHID);
- Size = sizeof(USB_Descriptor_HID_t);
- break;
- case DTYPE_Report:
- Address = DESCRIPTOR_ADDRESS(KeyboardReport);
- Size = sizeof(KeyboardReport);
- break;
- }
-
- *DescriptorAddress = Address;
- return Size;
-}
diff --git a/Demos/KeyboardFullInt/Descriptors.h b/Demos/KeyboardFullInt/Descriptors.h deleted file mode 100644 index aa1bf05b6..000000000 --- a/Demos/KeyboardFullInt/Descriptors.h +++ /dev/null @@ -1,98 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Denver Gingerich (denver [at] ossguy [dot] com)
- Based on code by Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
- /* Includes: */
- #include <LUFA/Drivers/USB/USB.h>
-
- #include <avr/pgmspace.h>
-
- /* Type Defines: */
- /** Type define for the HID class specific HID descriptor, to describe the HID device's specifications. Refer to the HID
- * specification for details on the structure elements.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header;
-
- uint16_t HIDSpec;
- uint8_t CountryCode;
-
- uint8_t TotalHIDReports;
-
- uint8_t HIDReportType;
- uint16_t HIDReportLength;
- } USB_Descriptor_HID_t;
-
- /** Type define for the data type used to store HID report descriptor elements. */
- typedef uint8_t USB_Descriptor_HIDReport_Datatype_t;
-
- /** Type define for the device configuration descriptor structure. This must be defined in the
- * application code, as the configuration descriptor contains several sub-descriptors which
- * vary between devices, and which describe the device's usage to the host.
- */
- typedef struct
- {
- USB_Descriptor_Configuration_Header_t Config;
- USB_Descriptor_Interface_t Interface;
- USB_Descriptor_HID_t KeyboardHID;
- USB_Descriptor_Endpoint_t KeyboardEndpoint;
- USB_Descriptor_Endpoint_t KeyboardLEDsEndpoint;
- } USB_Descriptor_Configuration_t;
-
- /* Macros: */
- /** Endpoint number of the Keyboard HID reporting IN endpoint. */
- #define KEYBOARD_EPNUM 1
-
- /** Endpoint number of the Keyboard HID reporting OUT endpoint. */
- #define KEYBOARD_LEDS_EPNUM 2
-
- /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */
- #define KEYBOARD_EPSIZE 8
-
- /** Descriptor header type value, to indicate a HID class HID descriptor. */
- #define DTYPE_HID 0x21
-
- /** Descriptor header type value, to indicate a HID class HID report descriptor. */
- #define DTYPE_Report 0x22
-
- /* Function Prototypes: */
- uint16_t USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
diff --git a/Demos/KeyboardFullInt/Doxygen.conf b/Demos/KeyboardFullInt/Doxygen.conf deleted file mode 100644 index 0a35a1436..000000000 --- a/Demos/KeyboardFullInt/Doxygen.conf +++ /dev/null @@ -1,1485 +0,0 @@ -# Doxyfile 1.5.7.1
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project
-#
-# All text after a hash (#) is considered a comment and will be ignored
-# The format is:
-# TAG = value [value, ...]
-# For lists items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ")
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all
-# text before the first occurrence of this tag. Doxygen uses libiconv (or the
-# iconv built into libc) for the transcoding. See
-# http://www.gnu.org/software/libiconv for the list of possible encodings.
-
-DOXYFILE_ENCODING = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
-# by quotes) that should identify the project.
-
-PROJECT_NAME = "LUFA Library - Keyboard Device Demo (Fully Interrupt Driven)"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number.
-# This could be handy for archiving the generated documentation or
-# if some version control system is used.
-
-PROJECT_NUMBER = 0.0.0
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
-# base path where the generated documentation will be put.
-# If a relative path is entered, it will be relative to the location
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
-# 4096 sub-directories (in 2 levels) under the output directory of each output
-# format and will distribute the generated files over these directories.
-# Enabling this option can be useful when feeding doxygen a huge amount of
-# source files, where putting all generated files in the same directory would
-# otherwise cause performance problems for the file system.
-
-CREATE_SUBDIRS = YES
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# The default language is English, other supported languages are:
-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
-# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek,
-# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish,
-# Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene,
-# Spanish, Swedish, and Ukrainian.
-
-OUTPUT_LANGUAGE = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
-# include brief member descriptions after the members that are listed in
-# the file and class documentation (similar to JavaDoc).
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
-# the brief description of a member or function before the detailed description.
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator
-# that is used to form the text in various listings. Each string
-# in this list, if found as the leading text of the brief description, will be
-# stripped from the text and the result after processing the whole list, is
-# used as the annotated text. Otherwise, the brief description is used as-is.
-# If left blank, the following values are used ("$name" is automatically
-# replaced with the name of the entity): "The $name class" "The $name widget"
-# "The $name file" "is" "provides" "specifies" "contains"
-# "represents" "a" "an" "the"
-
-ABBREVIATE_BRIEF = "The $name class" \
- "The $name widget" \
- "The $name file" \
- is \
- provides \
- specifies \
- contains \
- represents \
- a \
- an \
- the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# Doxygen will generate a detailed section even if there is only a brief
-# description.
-
-ALWAYS_DETAILED_SEC = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-
-INLINE_INHERITED_MEMB = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
-# path before files name in the file list and in the header files. If set
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES = YES
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
-# can be used to strip a user-defined part of the path. Stripping is
-# only done if one of the specified strings matches the left-hand part of
-# the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the
-# path to strip.
-
-STRIP_FROM_PATH =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
-# the path mentioned in the documentation of a class, which tells
-# the reader which header file to include in order to use a class.
-# If left blank only the name of the header file containing the class
-# definition is used. Otherwise one should specify the include paths that
-# are normally passed to the compiler using the -I flag.
-
-STRIP_FROM_INC_PATH =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
-# (but less readable) file names. This can be useful is your file systems
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
-# will interpret the first line (until the first dot) of a JavaDoc-style
-# comment as the brief description. If set to NO, the JavaDoc
-# comments will behave just like regular Qt-style comments
-# (thus requiring an explicit @brief command for a brief description.)
-
-JAVADOC_AUTOBRIEF = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
-# interpret the first line (until the first dot) of a Qt-style
-# comment as the brief description. If set to NO, the comments
-# will behave just like regular Qt-style comments (thus requiring
-# an explicit \brief command for a brief description.)
-
-QT_AUTOBRIEF = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
-# treat a multi-line C++ special comment block (i.e. a block of //! or ///
-# comments) as a brief description. This used to be the default behaviour.
-# The new default is to treat a multi-line C++ comment block as a detailed
-# description. Set this tag to YES if you prefer the old behaviour instead.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
-# member inherits the documentation from any documented member that it
-# re-implements.
-
-INHERIT_DOCS = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
-# a new page for each member. If set to NO, the documentation of a member will
-# be part of the file/class/namespace that contains it.
-
-SEPARATE_MEMBER_PAGES = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab.
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE = 4
-
-# This tag can be used to specify a number of aliases that acts
-# as commands in the documentation. An alias has the form "name=value".
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to
-# put the command \sideeffect (or @sideeffect) in the documentation, which
-# will result in a user-defined paragraph with heading "Side Effects:".
-# You can put \n's in the value part of an alias to insert newlines.
-
-ALIASES =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
-# sources only. Doxygen will then generate output that is more tailored for C.
-# For instance, some of the names that are used will be different. The list
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
-# sources only. Doxygen will then generate output that is more tailored for
-# Java. For instance, namespaces will be presented as packages, qualified
-# scopes will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources only. Doxygen will then generate output that is more tailored for
-# Fortran.
-
-OPTIMIZE_FOR_FORTRAN = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for
-# VHDL.
-
-OPTIMIZE_OUTPUT_VHDL = NO
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should
-# set this tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
-# func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-
-BUILTIN_STL_SUPPORT = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-
-CPP_CLI_SUPPORT = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
-# Doxygen will parse them like normal C++ but will assume all classes use public
-# instead of private inheritance when no explicit protection keyword is present.
-
-SIP_SUPPORT = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate getter
-# and setter methods for a property. Setting this option to YES (the default)
-# will make doxygen to replace the get and set methods by a property in the
-# documentation. This will only work if the methods are indeed getting or
-# setting a simple type. If this is not the case, or you want to show the
-# methods anyway, you should set this option to NO.
-
-IDL_PROPERTY_SUPPORT = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-
-DISTRIBUTE_GROUP_DOC = NO
-
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
-# the same type (for instance a group of public functions) to be put as a
-# subgroup of that type (e.g. under the Public Functions section). Set it to
-# NO to prevent subgrouping. Alternatively, this can be done per class using
-# the \nosubgrouping command.
-
-SUBGROUPING = YES
-
-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
-# is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically
-# be useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-
-TYPEDEF_HIDES_STRUCT = NO
-
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penality.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will rougly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols
-
-SYMBOL_CACHE_SIZE = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available.
-# Private class members and static file members will be hidden unless
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-
-EXTRACT_ALL = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
-# will be included in the documentation.
-
-EXTRACT_PRIVATE = YES
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file
-# will be included in the documentation.
-
-EXTRACT_STATIC = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
-# defined locally in source files will be included in the documentation.
-# If set to NO only classes defined in header files are included.
-
-EXTRACT_LOCAL_CLASSES = YES
-
-# This flag is only useful for Objective-C code. When set to YES local
-# methods, which are defined in the implementation section but not in
-# the interface are included in the documentation.
-# If set to NO (the default) only methods in the interface are included.
-
-EXTRACT_LOCAL_METHODS = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base
-# name of the file that contains the anonymous namespace. By default
-# anonymous namespace are hidden.
-
-EXTRACT_ANON_NSPACES = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
-# undocumented members of documented classes, files or namespaces.
-# If set to NO (the default) these members will be included in the
-# various overviews, but no documentation section is generated.
-# This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_MEMBERS = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy.
-# If set to NO (the default) these classes will be included in the various
-# overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_CLASSES = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
-# friend (class|struct|union) declarations.
-# If set to NO (the default) these declarations will be included in the
-# documentation.
-
-HIDE_FRIEND_COMPOUNDS = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
-# documentation blocks found inside the body of a function.
-# If set to NO (the default) these blocks will be appended to the
-# function's detailed documentation block.
-
-HIDE_IN_BODY_DOCS = NO
-
-# The INTERNAL_DOCS tag determines if documentation
-# that is typed after a \internal command is included. If the tag is set
-# to NO (the default) then the documentation will be excluded.
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
-# file names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-
-CASE_SENSE_NAMES = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
-# will show members with their full class and namespace scopes in the
-# documentation. If set to YES the scope will be hidden.
-
-HIDE_SCOPE_NAMES = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
-# will put a list of the files that are included by a file in the documentation
-# of that file.
-
-SHOW_INCLUDE_FILES = YES
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
-# is inserted in the documentation for inline members.
-
-INLINE_INFO = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
-# will sort the (detailed) documentation of file and class members
-# alphabetically by member name. If set to NO the members will appear in
-# declaration order.
-
-SORT_MEMBER_DOCS = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
-# brief documentation of file, namespace and class members alphabetically
-# by member name. If set to NO (the default) the members will appear in
-# declaration order.
-
-SORT_BRIEF_DOCS = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
-# hierarchy of group names into alphabetical order. If set to NO (the default)
-# the group names will appear in their defined order.
-
-SORT_GROUP_NAMES = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
-# sorted by fully-qualified names, including namespaces. If set to
-# NO (the default), the class list will be sorted only by class name,
-# not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the
-# alphabetical list.
-
-SORT_BY_SCOPE_NAME = NO
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or
-# disable (NO) the todo list. This list is created by putting \todo
-# commands in the documentation.
-
-GENERATE_TODOLIST = NO
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or
-# disable (NO) the test list. This list is created by putting \test
-# commands in the documentation.
-
-GENERATE_TESTLIST = NO
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or
-# disable (NO) the bug list. This list is created by putting \bug
-# commands in the documentation.
-
-GENERATE_BUGLIST = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
-# disable (NO) the deprecated list. This list is created by putting
-# \deprecated commands in the documentation.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
-# the initial value of a variable or define consists of for it to appear in
-# the documentation. If the initializer consists of more lines than specified
-# here it will be hidden. Use a value of 0 to hide initializers completely.
-# The appearance of the initializer of individual variables and defines in the
-# documentation can be controlled using \showinitializer or \hideinitializer
-# command in the documentation regardless of this setting.
-
-MAX_INITIALIZER_LINES = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
-# at the bottom of the documentation of classes and structs. If set to YES the
-# list will mention the files that were used to generate the documentation.
-
-SHOW_USED_FILES = YES
-
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
-# This will remove the Files entry from the Quick Index and from the
-# Folder Tree View (if specified). The default is YES.
-
-SHOW_FILES = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
-# Namespaces page. This will remove the Namespaces entry from the Quick Index
-# and from the Folder Tree View (if specified). The default is YES.
-
-SHOW_NAMESPACES = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command <command> <input-file>, where <command> is the value of
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
-# provided by doxygen. Whatever the program writes to standard output
-# is used as the file version. See the manual for examples.
-
-FILE_VERSION_FILTER =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
-# doxygen. The layout file controls the global structure of the generated output files
-# in an output format independent way. The create the layout file that represents
-# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
-# file name after the option, if omitted DoxygenLayout.xml will be used as the name
-# of the layout file.
-
-LAYOUT_FILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated by doxygen. Possible values are YES and NO. If left blank
-# NO is used.
-
-WARNINGS = YES
-
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
-# automatically be disabled.
-
-WARN_IF_UNDOCUMENTED = YES
-
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some
-# parameters in a documented function, or documenting parameters that
-# don't exist or using markup commands wrongly.
-
-WARN_IF_DOC_ERROR = YES
-
-# This WARN_NO_PARAMDOC option can be abled to get warnings for
-# functions that are documented, but have no documentation for their parameters
-# or return value. If set to NO (the default) doxygen will only warn about
-# wrong or incomplete parameter documentation, but not about the absence of
-# documentation.
-
-WARN_NO_PARAMDOC = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that
-# doxygen can produce. The string should contain the $file, $line, and $text
-# tags, which will be replaced by the file and line number from which the
-# warning originated and the warning text. Optionally the format may contain
-# $version, which will be replaced by the version of the file (if it could
-# be obtained via FILE_VERSION_FILTER)
-
-WARN_FORMAT = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning
-# and error messages should be written. If left blank the output is written
-# to stderr.
-
-WARN_LOGFILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that contain
-# documented source files. You may enter file names like "myfile.cpp" or
-# directories like "/usr/src/myproject". Separate the files or directories
-# with spaces.
-
-INPUT = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
-# also the default input encoding. Doxygen uses libiconv (or the iconv built
-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
-# the list of possible encodings.
-
-INPUT_ENCODING = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank the following patterns are tested:
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
-
-FILE_PATTERNS = *.h \
- *.c \
- *.txt
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories
-# should be searched for input files as well. Possible values are YES and NO.
-# If left blank NO is used.
-
-RECURSIVE = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-
-EXCLUDE =
-
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
-# directories that are symbolic links (a Unix filesystem feature) are excluded
-# from the input.
-
-EXCLUDE_SYMLINKS = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories. Note that the wildcards are matched
-# against the file with absolute path, so to exclude all test directories
-# for example use the pattern */test/*
-
-EXCLUDE_PATTERNS = */LowLevel/USBMode.h
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-
-EXCLUDE_SYMBOLS = __*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or
-# directories that contain example code fragments that are included (see
-# the \include command).
-
-EXAMPLE_PATH =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank all files are included.
-
-EXAMPLE_PATTERNS = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude
-# commands irrespective of the value of the RECURSIVE tag.
-# Possible values are YES and NO. If left blank NO is used.
-
-EXAMPLE_RECURSIVE = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or
-# directories that contain image that are included in the documentation (see
-# the \image command).
-
-IMAGE_PATH =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command <filter> <input-file>, where <filter>
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
-# input file. Doxygen will then use the output that the filter program writes
-# to standard output. If FILTER_PATTERNS is specified, this tag will be
-# ignored.
-
-INPUT_FILTER =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form:
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
-# is applied to all files.
-
-FILTER_PATTERNS =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER) will be used to filter the input files when producing source
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).
-
-FILTER_SOURCE_FILES = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will
-# be generated. Documented entities will be cross-referenced with these sources.
-# Note: To get rid of all source code in the generated output, make sure also
-# VERBATIM_HEADERS is set to NO.
-
-SOURCE_BROWSER = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
-# doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
-
-STRIP_CODE_COMMENTS = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES
-# then for each documented function all documented
-# functions referencing it will be listed.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES
-# then for each documented function all documented entities
-# called/used by that function will be listed.
-
-REFERENCES_RELATION = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
-# link to the source code. Otherwise they will link to the documentstion.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If the USE_HTAGS tag is set to YES then the references to source code
-# will point to the HTML generated by the htags(1) tool instead of doxygen
-# built-in source browser. The htags tool is part of GNU's global source
-# tagging system (see http://www.gnu.org/software/global/global.html). You
-# will need version 4.8.6 or higher.
-
-USE_HTAGS = NO
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
-# will generate a verbatim copy of the header file for each class for
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
-# of all compounds will be generated. Enable this if the project
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX = YES
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX = 5
-
-# In case all classes in a project start with a common prefix, all
-# classes will be put under the same header in the alphabetical index.
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX =
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
-# generate HTML output.
-
-GENERATE_HTML = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
-# doxygen will generate files with .html extension.
-
-HTML_FILE_EXTENSION = .html
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard header.
-
-HTML_HEADER =
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard footer.
-
-HTML_FOOTER =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
-# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
-# stylesheet in the HTML output directory as well, or it will be erased!
-
-HTML_STYLESHEET =
-
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
-
-HTML_DYNAMIC_SECTIONS = YES
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files
-# will be generated that can be used as input for Apple's Xcode 3
-# integrated development environment, introduced with OSX 10.5 (Leopard).
-# To create a documentation set, doxygen will generate a Makefile in the
-# HTML output directory. Running make will produce the docset in that
-# directory and running "make install" will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
-# it at startup.
-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
-
-GENERATE_DOCSET = NO
-
-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
-# feed. A documentation feed provides an umbrella under which multiple
-# documentation sets from a single provider (such as a company or product suite)
-# can be grouped.
-
-DOCSET_FEEDNAME = "Doxygen generated docs"
-
-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
-# should uniquely identify the documentation set bundle. This should be a
-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
-# will append .docset to the name.
-
-DOCSET_BUNDLE_ID = org.doxygen.Project
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files
-# will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
-# be used to specify the file name of the resulting .chm file. You
-# can add a path in front of the file if the result should not be
-# written to the html output directory.
-
-CHM_FILE =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
-# be used to specify the location (absolute path including file name) of
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
-# the HTML help compiler on the generated index.hhp.
-
-HHC_LOCATION =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
-# controls if a separate .chi index file is generated (YES) or that
-# it should be included in the master .chm file (NO).
-
-GENERATE_CHI = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
-# is used to encode HtmlHelp index (hhk), content (hhc) and project file
-# content.
-
-CHM_INDEX_ENCODING =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
-# controls whether a binary table of contents is generated (YES) or a
-# normal table of contents (NO) in the .chm file.
-
-BINARY_TOC = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members
-# to the contents of the HTML help documentation and to the tree view.
-
-TOC_EXPAND = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
-# are set, an additional index file will be generated that can be used as input for
-# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
-# HTML documentation.
-
-GENERATE_QHP = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
-# be used to specify the file name of the resulting .qch file.
-# The path specified is relative to the HTML output folder.
-
-QCH_FILE =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# <a href="http://doc.trolltech.com/qthelpproject.html#namespace">Qt Help Project / Namespace</a>.
-
-QHP_NAMESPACE = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# <a href="http://doc.trolltech.com/qthelpproject.html#virtual-folders">Qt Help Project / Virtual Folders</a>.
-
-QHP_VIRTUAL_FOLDER = doc
-
-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
-# be used to specify the location of Qt's qhelpgenerator.
-# If non-empty doxygen will try to run qhelpgenerator on the generated
-# .qhp file .
-
-QHG_LOCATION =
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
-# top of each HTML page. The value NO (the default) enables the index and
-# the value YES disables it.
-
-DISABLE_INDEX = NO
-
-# This tag can be used to set the number of enum values (range [1..20])
-# that doxygen will group on one line in the generated HTML documentation.
-
-ENUM_VALUES_PER_LINE = 1
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information.
-# If the tag value is set to FRAME, a side panel will be generated
-# containing a tree-like index structure (just like the one that
-# is generated for HTML Help). For this to work a browser that supports
-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
-# probably better off using the HTML help feature. Other possible values
-# for this tag are: HIERARCHIES, which will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list;
-# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which
-# disables this behavior completely. For backwards compatibility with previous
-# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE
-# respectively.
-
-GENERATE_TREEVIEW = YES
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
-# used to set the initial width (in pixels) of the frame in which the tree
-# is shown.
-
-TREEVIEW_WIDTH = 250
-
-# Use this tag to change the font size of Latex formulas included
-# as images in the HTML documentation. The default is 10. Note that
-# when you change the font size after a successful doxygen run you need
-# to manually remove any form_*.png images from the HTML output directory
-# to force them to be regenerated.
-
-FORMULA_FONTSIZE = 10
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
-# generate Latex output.
-
-GENERATE_LATEX = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked. If left blank `latex' will be used as the default command name.
-
-LATEX_CMD_NAME = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
-# default command name.
-
-MAKEINDEX_CMD_NAME = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_LATEX = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, a4wide, letter, legal and
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS = YES
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
-# higher quality PDF documentation.
-
-USE_PDFLATEX = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE = NO
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
-# in the output.
-
-LATEX_HIDE_INDICES = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
-# The RTF output is optimized for Word 97 and may not look very pretty with
-# other RTF readers or editors.
-
-GENERATE_RTF = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT = rtf
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
-# RTF documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_RTF = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
-# will contain hyperlink fields. The RTF file will
-# contain links (just like the HTML output) instead of page references.
-# This makes the output suitable for online browsing using WORD or other
-# programs which support those fields.
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
-# config file, i.e. a series of assignments. You only have to provide
-# replacements, missing definitions are set to their default value.
-
-RTF_STYLESHEET_FILE =
-
-# Set optional variables used in the generation of an rtf document.
-# Syntax is similar to doxygen's config file.
-
-RTF_EXTENSIONS_FILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
-# generate man pages
-
-GENERATE_MAN = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT = man
-
-# The MAN_EXTENSION tag determines the extension that is added to
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION = .3
-
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
-# then it will generate one additional man file for each entity
-# documented in the real man page(s). These additional files
-# only source the real man page, but without them the man command
-# would be unable to find the correct page. The default is NO.
-
-MAN_LINKS = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES Doxygen will
-# generate an XML file that captures the structure of
-# the code including all documentation.
-
-GENERATE_XML = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD =
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING = YES
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
-# generate an AutoGen Definitions (see autogen.sf.net) file
-# that captures the structure of the code including all
-# documentation. Note that this feature is still experimental
-# and incomplete at the moment.
-
-GENERATE_AUTOGEN_DEF = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will
-# generate a Perl module file that captures the structure of
-# the code including all documentation. Note that this
-# feature is still experimental and incomplete at the
-# moment.
-
-GENERATE_PERLMOD = NO
-
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able
-# to generate PDF and DVI output from the Perl module output.
-
-PERLMOD_LATEX = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
-# nicely formatted so it can be parsed by a human reader. This is useful
-# if you want to understand what is going on. On the other hand, if this
-# tag is set to NO the size of the Perl module output will be much smaller
-# and Perl will parse it just the same.
-
-PERLMOD_PRETTY = YES
-
-# The names of the make variables in the generated doxyrules.make file
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
-# This is useful so different doxyrules.make files included by the same
-# Makefile don't overwrite each other's variables.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
-# evaluate all C-preprocessor directives found in the sources and include
-# files.
-
-ENABLE_PREPROCESSING = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
-# names in the source code. If set to NO (the default) only conditional
-# compilation will be performed. Macro expansion can be done in a controlled
-# way by setting EXPAND_ONLY_PREDEF to YES.
-
-MACRO_EXPANSION = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
-# then the macro expansion is limited to the macros specified with the
-# PREDEFINED and EXPAND_AS_DEFINED tags.
-
-EXPAND_ONLY_PREDEF = YES
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
-
-SEARCH_INCLUDES = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by
-# the preprocessor.
-
-INCLUDE_PATH =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will
-# be used.
-
-INCLUDE_FILE_PATTERNS =
-
-# The PREDEFINED tag can be used to specify one or more macro names that
-# are defined before the preprocessor is started (similar to the -D option of
-# gcc). The argument of the tag is a list of macros of the form: name
-# or name=definition (no spaces). If the definition and the = are
-# omitted =1 is assumed. To prevent a macro definition from being
-# undefined via #undef or recursively expanded use the := operator
-# instead of the = operator.
-
-PREDEFINED = __DOXYGEN__
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
-# this tag can be used to specify a list of macro names that should be expanded.
-# The macro definition that is found in the sources will be used.
-# Use the PREDEFINED tag if you want to use a different macro definition.
-
-EXPAND_AS_DEFINED = BUTTLOADTAG
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
-# doxygen's preprocessor will remove all function-like macros that are alone
-# on a line, have an all uppercase name, and do not end with a semicolon. Such
-# function macros are typically used for boiler-plate code, and will confuse
-# the parser if not removed.
-
-SKIP_FUNCTION_MACROS = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES option can be used to specify one or more tagfiles.
-# Optionally an initial location of the external documentation
-# can be added for each tagfile. The format of a tag file without
-# this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths or
-# URLs. If a location is present for each tag, the installdox tool
-# does not have to be run to correct the links.
-# Note that each tag file must have a unique name
-# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen
-# is run, you must also specify the path to the tagfile here.
-
-TAGFILES =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE =
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed
-# in the class index. If set to NO only the inherited external classes
-# will be listed.
-
-ALLEXTERNALS = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will
-# be listed.
-
-EXTERNAL_GROUPS = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
-# or super classes. Setting the tag to NO turns the diagrams off. Note that
-# this option is superseded by the HAVE_DOT option below. This is only a
-# fallback. It is recommended to install and use dot, since it yields more
-# powerful graphs.
-
-CLASS_DIAGRAMS = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see
-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH =
-
-# If set to YES, the inheritance and collaboration graphs will hide
-# inheritance and usage relations if the target is undocumented
-# or is not a class.
-
-HIDE_UNDOC_RELATIONS = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz, a graph visualization
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT = NO
-
-# By default doxygen will write a font called FreeSans.ttf to the output
-# directory and reference it in all dot files that doxygen generates. This
-# font does not include all possible unicode characters however, so when you need
-# these (or just want a differently looking font) you can specify the font name
-# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
-# which can be done by putting it in a standard location or by setting the
-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
-# containing the font.
-
-DOT_FONTNAME = FreeSans
-
-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
-# The default size is 10pt.
-
-DOT_FONTSIZE = 10
-
-# By default doxygen will tell dot to use the output directory to look for the
-# FreeSans.ttf font (which doxygen will put there itself). If you specify a
-# different font using DOT_FONTNAME you can set the path where dot
-# can find it using this tag.
-
-DOT_FONTPATH =
-
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect inheritance relations. Setting this tag to YES will force the
-# the CLASS_DIAGRAMS tag to NO.
-
-CLASS_GRAPH = NO
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect implementation dependencies (inheritance, containment, and
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH = NO
-
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for groups, showing the direct groups dependencies
-
-GROUP_GRAPHS = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-
-UML_LOOK = NO
-
-# If set to YES, the inheritance and collaboration graphs will show the
-# relations between templates and their instances.
-
-TEMPLATE_RELATIONS = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
-# tags are set to YES then doxygen will generate a graph for each documented
-# file showing the direct and indirect include dependencies of the file with
-# other documented files.
-
-INCLUDE_GRAPH = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
-# documented header file showing the documented files that directly or
-# indirectly include this file.
-
-INCLUDED_BY_GRAPH = NO
-
-# If the CALL_GRAPH and HAVE_DOT options are set to YES then
-# doxygen will generate a call dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable call graphs
-# for selected functions only using the \callgraph command.
-
-CALL_GRAPH = NO
-
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
-# doxygen will generate a caller dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable caller
-# graphs for selected functions only using the \callergraph command.
-
-CALLER_GRAPH = NO
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
-# will graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY = NO
-
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
-# then doxygen will show the dependencies a directory has on other directories
-# in a graphical way. The dependency relations are determined by the #include
-# relations between the files in the directories.
-
-DIRECTORY_GRAPH = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. Possible values are png, jpg, or gif
-# If left blank png will be used.
-
-DOT_IMAGE_FORMAT = png
-
-# The tag DOT_PATH can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-
-DOT_PATH = "C:/Program Files/Graphviz2.18/bin"
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the
-# \dotfile command).
-
-DOTFILE_DIRS =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
-# nodes that will be shown in the graph. If the number of nodes in a graph
-# becomes larger than this value, doxygen will truncate the graph, which is
-# visualized by representing a node as a red box. Note that doxygen if the
-# number of direct children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-
-DOT_GRAPH_MAX_NODES = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
-# graphs generated by dot. A depth value of 3 means that only nodes reachable
-# from the root by following a path via at most 3 edges will be shown. Nodes
-# that lay further from the root node will be omitted. Note that setting this
-# option to 1 or 2 may greatly reduce the computation time needed for large
-# code bases. Also note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-
-MAX_DOT_GRAPH_DEPTH = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not
-# seem to support this out of the box. Warning: Depending on the platform used,
-# enabling this option may lead to badly anti-aliased labels on the edges of
-# a graph (i.e. they become hard to read).
-
-DOT_TRANSPARENT = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10)
-# support this, this feature is disabled by default.
-
-DOT_MULTI_TARGETS = NO
-
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
-# generate a legend page explaining the meaning of the various boxes and
-# arrows in the dot generated graphs.
-
-GENERATE_LEGEND = YES
-
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
-# remove the intermediate dot files that are used to generate
-# the various graphs.
-
-DOT_CLEANUP = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine
-#---------------------------------------------------------------------------
-
-# The SEARCHENGINE tag specifies whether or not a search engine should be
-# used. If set to NO the values of all tags below this one will be ignored.
-
-SEARCHENGINE = NO
diff --git a/Demos/KeyboardFullInt/KeyboardFullInt.aps b/Demos/KeyboardFullInt/KeyboardFullInt.aps deleted file mode 100644 index f23575e35..000000000 --- a/Demos/KeyboardFullInt/KeyboardFullInt.aps +++ /dev/null @@ -1 +0,0 @@ -<AVRStudio><MANAGEMENT><ProjectName>KeyboardFullInt</ProjectName><Created>30-Sep-2008 14:07:59</Created><LastEdit>30-Sep-2008 14:08:25</LastEdit><ICON>241</ICON><ProjectType>0</ProjectType><Created>30-Sep-2008 14:07:59</Created><Version>4</Version><Build>4, 14, 0, 589</Build><ProjectTypeName>AVR GCC</ProjectTypeName></MANAGEMENT><CODE_CREATION><ObjectFile></ObjectFile><EntryFile></EntryFile><SaveFolder>C:\Users\Dean\Documents\Electronics\Projects\WORK\MyUSBWORK\Demos\KeyboardFullInt\</SaveFolder></CODE_CREATION><DEBUG_TARGET><CURRENT_TARGET>JTAGICE mkII</CURRENT_TARGET><CURRENT_PART>AT90USB1287.xml</CURRENT_PART><BREAKPOINTS></BREAKPOINTS><IO_EXPAND><HIDE>false</HIDE></IO_EXPAND><REGISTERNAMES><Register>R00</Register><Register>R01</Register><Register>R02</Register><Register>R03</Register><Register>R04</Register><Register>R05</Register><Register>R06</Register><Register>R07</Register><Register>R08</Register><Register>R09</Register><Register>R10</Register><Register>R11</Register><Register>R12</Register><Register>R13</Register><Register>R14</Register><Register>R15</Register><Register>R16</Register><Register>R17</Register><Register>R18</Register><Register>R19</Register><Register>R20</Register><Register>R21</Register><Register>R22</Register><Register>R23</Register><Register>R24</Register><Register>R25</Register><Register>R26</Register><Register>R27</Register><Register>R28</Register><Register>R29</Register><Register>R30</Register><Register>R31</Register></REGISTERNAMES><COM>Auto</COM><COMType>0</COMType><WATCHNUM>0</WATCHNUM><WATCHNAMES><Pane0></Pane0><Pane1></Pane1><Pane2></Pane2><Pane3></Pane3></WATCHNAMES><BreakOnTrcaeFull>0</BreakOnTrcaeFull></DEBUG_TARGET><Debugger><Triggers></Triggers></Debugger><AVRGCCPLUGIN><FILES><SOURCEFILE>Descriptors.c</SOURCEFILE><SOURCEFILE>KeyboardFullInt.c</SOURCEFILE><HEADERFILE>Descriptors.h</HEADERFILE><HEADERFILE>KeyboardFullInt.h</HEADERFILE><OTHERFILE>makefile</OTHERFILE></FILES><CONFIGS><CONFIG><NAME>default</NAME><USESEXTERNALMAKEFILE>YES</USESEXTERNALMAKEFILE><EXTERNALMAKEFILE>makefile</EXTERNALMAKEFILE><PART>at90usb1287</PART><HEX>1</HEX><LIST>1</LIST><MAP>1</MAP><OUTPUTFILENAME>KeyboardFullInt.elf</OUTPUTFILENAME><OUTPUTDIR>default\</OUTPUTDIR><ISDIRTY>1</ISDIRTY><OPTIONS/><INCDIRS/><LIBDIRS/><LIBS/><LINKOBJECTS/><OPTIONSFORALL>-Wall -gdwarf-2 -std=gnu99 -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums</OPTIONSFORALL><LINKEROPTIONS></LINKEROPTIONS><SEGMENTS/></CONFIG></CONFIGS><LASTCONFIG>default</LASTCONFIG><USES_WINAVR>1</USES_WINAVR><GCC_LOC>C:\WinAVR-20080512\bin\avr-gcc.exe</GCC_LOC><MAKE_LOC>C:\WinAVR-20080512\utils\bin\make.exe</MAKE_LOC></AVRGCCPLUGIN><IOView><usergroups/><sort sorted="0" column="0" ordername="0" orderaddress="0" ordergroup="0"/></IOView><Files><File00000><FileId>00000</FileId><FileName>makefile</FileName><Status>1</Status></File00000></Files><Events><Bookmarks></Bookmarks></Events><Trace><Filters></Filters></Trace></AVRStudio>
diff --git a/Demos/KeyboardFullInt/KeyboardFullInt.c b/Demos/KeyboardFullInt/KeyboardFullInt.c deleted file mode 100644 index 6a15a9233..000000000 --- a/Demos/KeyboardFullInt/KeyboardFullInt.c +++ /dev/null @@ -1,470 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Denver Gingerich (denver [at] ossguy [dot] com)
- Based on code by Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Main source file for the KeyboardFullInt demo. This file contains the main tasks of the demo and
- * is responsible for the initial application hardware configuration.
- */
-
-#include "KeyboardFullInt.h"
-
-/* Project Tags, for reading out using the ButtLoad project */
-BUTTLOADTAG(ProjName, "LUFA KeyboardFI App");
-BUTTLOADTAG(BuildTime, __TIME__);
-BUTTLOADTAG(BuildDate, __DATE__);
-BUTTLOADTAG(LUFAVersion, "LUFA V" LUFA_VERSION_STRING);
-
-/* Global Variables */
-/** Indicates what report mode the host has requested, true for normal HID reporting mode, false for special boot
- * protocol reporting mode.
- */
-bool UsingReportProtocol = true;
-
-/** Current Idle period. This is set by the host via a Set Idle HID class request to silence the device's reports
- * for either the entire idle duration, or until the report status changes (e.g. the user moves the mouse).
- */
-uint8_t IdleCount = 0;
-
-/** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle
- * milliseconds. This is seperate to the IdleCount timer and is incremented and compared as the host may request
- * the current idle period via a Get Idle HID class request, thus its value must be preserved.
- */
-uint16_t IdleMSRemaining = 0;
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- * starts the scheduler to run the USB management task.
- */
-int main(void)
-{
- /* Disable watchdog if enabled by bootloader/fuses */
- MCUSR &= ~(1 << WDRF);
- wdt_disable();
-
- /* Disable clock division */
- clock_prescale_set(clock_div_1);
-
- /* Hardware Initialization */
- Joystick_Init();
- LEDs_Init();
-
- /* Millisecond timer initialization, with output compare interrupt enabled for the idle timing */
- OCR0A = 0x7D;
- TCCR0A = (1 << WGM01);
- TCCR0B = ((1 << CS01) | (1 << CS00));
- TIMSK0 = (1 << OCIE0A);
-
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
-
- /* Initialize USB Subsystem */
- USB_Init();
-
- /* Main program code loop */
- for (;;)
- {
- /* No main code -- all USB code is interrupt driven */
- }
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
- * starts the library USB task to begin the enumeration and USB management process.
- */
-EVENT_HANDLER(USB_Connect)
-{
- /* Indicate USB enumerating */
- UpdateStatus(Status_USBEnumerating);
-
- /* Default to report protocol on connect */
- UsingReportProtocol = true;
-}
-
-/** Event handler for the USB_Reset event. This fires when the USB interface is reset by the USB host, before the
- * enumeration process begins, and enables the control endpoint interrupt so that control requests can be handled
- * asynchronously when they arrive rather than when the control endpoint is polled manually.
- */
-EVENT_HANDLER(USB_Reset)
-{
- /* Select the control endpoint */
- Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
-
- /* Enable the endpoint SETUP interrupt ISR for the control endpoint */
- USB_INT_Enable(ENDPOINT_INT_SETUP);
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- * the status LEDs.
- */
-EVENT_HANDLER(USB_Disconnect)
-{
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
- * of the USB device after enumeration, and configures the keyboard device endpoints.
- */
-EVENT_HANDLER(USB_ConfigurationChanged)
-{
- /* Setup Keyboard Keycode Report Endpoint */
- Endpoint_ConfigureEndpoint(KEYBOARD_EPNUM, EP_TYPE_INTERRUPT,
- ENDPOINT_DIR_IN, KEYBOARD_EPSIZE,
- ENDPOINT_BANK_SINGLE);
-
- /* Enable the endpoint IN interrupt ISR for the report endpoint */
- USB_INT_Enable(ENDPOINT_INT_IN);
-
- /* Setup Keyboard LED Report Endpoint */
- Endpoint_ConfigureEndpoint(KEYBOARD_LEDS_EPNUM, EP_TYPE_INTERRUPT,
- ENDPOINT_DIR_OUT, KEYBOARD_EPSIZE,
- ENDPOINT_BANK_SINGLE);
-
- /* Enable the endpoint OUT interrupt ISR for the LED report endpoint */
- USB_INT_Enable(ENDPOINT_INT_OUT);
-
- /* Indicate USB connected and ready */
- UpdateStatus(Status_USBReady);
-}
-
-/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific
- * control requests that are not handled internally by the USB library (including the HID commands, which are
- * all issued via the control endpoint), so that they can be handled appropriately for the application.
- */
-EVENT_HANDLER(USB_UnhandledControlPacket)
-{
- /* Handle HID Class specific requests */
- switch (bRequest)
- {
- case REQ_GetReport:
- if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- USB_KeyboardReport_Data_t KeyboardReportData;
-
- /* Create the next keyboard report for transmission to the host */
- GetNextReport(&KeyboardReportData);
-
- /* Ignore report type and ID number value */
- Endpoint_Discard_Word();
-
- /* Ignore unused Interface number value */
- Endpoint_Discard_Word();
-
- /* Read in the number of bytes in the report to send to the host */
- uint16_t wLength = Endpoint_Read_Word_LE();
-
- /* If trying to send more bytes than exist to the host, clamp the value at the report size */
- if (wLength > sizeof(KeyboardReportData))
- wLength = sizeof(KeyboardReportData);
-
- Endpoint_ClearSetupReceived();
-
- /* Write the report data to the control endpoint */
- Endpoint_Write_Control_Stream_LE(&KeyboardReportData, wLength);
-
- /* Finalize the stream transfer to send the last packet or clear the host abort */
- Endpoint_ClearSetupOUT();
- }
-
- break;
- case REQ_SetReport:
- if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSetupReceived();
-
- /* Wait until the LED report has been sent by the host */
- while (!(Endpoint_IsSetupOUTReceived()));
-
- /* Read in the LED report from the host */
- uint8_t LEDStatus = Endpoint_Read_Byte();
-
- /* Process the incomming LED report */
- ProcessLEDReport(LEDStatus);
-
- /* Clear the endpoint data */
- Endpoint_ClearSetupOUT();
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsSetupINReady()));
- Endpoint_ClearSetupIN();
- }
-
- break;
- case REQ_GetProtocol:
- if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSetupReceived();
-
- /* Write the current protocol flag to the host */
- Endpoint_Write_Byte(UsingReportProtocol);
-
- /* Send the flag to the host */
- Endpoint_ClearSetupIN();
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsSetupOUTReceived()));
- Endpoint_ClearSetupOUT();
- }
-
- break;
- case REQ_SetProtocol:
- if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- /* Read in the wValue parameter containing the new protocol mode */
- uint16_t wValue = Endpoint_Read_Word_LE();
-
- Endpoint_ClearSetupReceived();
-
- /* Set or clear the flag depending on what the host indicates that the current Protocol should be */
- UsingReportProtocol = (wValue != 0x0000);
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsSetupINReady()));
- Endpoint_ClearSetupIN();
- }
-
- break;
- case REQ_SetIdle:
- if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- /* Read in the wValue parameter containing the idle period */
- uint16_t wValue = Endpoint_Read_Word_LE();
-
- Endpoint_ClearSetupReceived();
-
- /* Get idle period in MSB */
- IdleCount = (wValue >> 8);
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsSetupINReady()));
- Endpoint_ClearSetupIN();
- }
-
- break;
- case REQ_GetIdle:
- if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSetupReceived();
-
- /* Write the current idle duration to the host */
- Endpoint_Write_Byte(IdleCount);
-
- /* Send the flag to the host */
- Endpoint_ClearSetupIN();
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsSetupOUTReceived()));
- Endpoint_ClearSetupOUT();
- }
-
- break;
- }
-}
-
-/** ISR for the timer 0 compare vector. This ISR fires once each millisecond, and increments the
- * scheduler elapsed idle period counter when the host has set an idle period.
- */
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
-{
- /* One millisecond has elapsed, decrement the idle time remaining counter if it has not already elapsed */
- if (IdleMSRemaining)
- IdleMSRemaining--;
-}
-
-/** Fills the given HID report data structure with the next HID report to send to the host.
- *
- * \param ReportData Pointer to a HID report data structure to be filled
- *
- * \return Boolean true if the new report differs from the last report, false otherwise
- */
-bool GetNextReport(USB_KeyboardReport_Data_t* ReportData)
-{
- static uint8_t PrevJoyStatus = 0;
- uint8_t JoyStatus_LCL = Joystick_GetStatus();
- bool InputChanged = false;
-
- /* Clear the report contents */
- memset(ReportData, 0, sizeof(USB_KeyboardReport_Data_t));
-
- if (JoyStatus_LCL & JOY_UP)
- ReportData->KeyCode[0] = 0x04; // A
- else if (JoyStatus_LCL & JOY_DOWN)
- ReportData->KeyCode[0] = 0x05; // B
-
- if (JoyStatus_LCL & JOY_LEFT)
- ReportData->KeyCode[0] = 0x06; // C
- else if (JoyStatus_LCL & JOY_RIGHT)
- ReportData->KeyCode[0] = 0x07; // D
-
- if (JoyStatus_LCL & JOY_PRESS)
- ReportData->KeyCode[0] = 0x08; // E
-
- /* Check if the new report is different to the previous report */
- InputChanged = (uint8_t)(PrevJoyStatus ^ JoyStatus_LCL);
-
- /* Save the current joystick status for later comparison */
- PrevJoyStatus = JoyStatus_LCL;
-
- /* Return whether the new report is different to the previous report or not */
- return InputChanged;
-}
-
-/** Processes a given LED report mask from the host and sets the board LEDs to match.
- *
- * \param LEDReport LED mask from the host, containing a mask of what LEDs are set
- */
-void ProcessLEDReport(uint8_t LEDReport)
-{
- uint8_t LEDMask = LEDS_LED2;
-
- if (LEDReport & 0x01) // NUM Lock
- LEDMask |= LEDS_LED1;
-
- if (LEDReport & 0x02) // CAPS Lock
- LEDMask |= LEDS_LED3;
-
- if (LEDReport & 0x04) // SCROLL Lock
- LEDMask |= LEDS_LED4;
-
- /* Set the status LEDs to the current Keyboard LED status */
- LEDs_SetAllLEDs(LEDMask);
-}
-
-/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
- * log to a serial port, or anything else that is suitable for status updates.
- *
- * \param CurrentStatus Current status of the system, from the KeyboardFullInt_StatusCodes_t enum
- */
-void UpdateStatus(uint8_t CurrentStatus)
-{
- uint8_t LEDMask = LEDS_NO_LEDS;
-
- /* Set the LED mask to the appropriate LED mask based on the given status code */
- switch (CurrentStatus)
- {
- case Status_USBNotReady:
- LEDMask = (LEDS_LED1);
- break;
- case Status_USBEnumerating:
- LEDMask = (LEDS_LED1 | LEDS_LED2);
- break;
- case Status_USBReady:
- LEDMask = (LEDS_LED2 | LEDS_LED4);
- break;
- }
-
- /* Set the board LEDs to the new LED mask */
- LEDs_SetAllLEDs(LEDMask);
-}
-
-/** ISR for the general Pipe/Endpoint interrupt vector. This ISR fires when an endpoint's status changes (such as
- * a packet has been received) on an endpoint with its corresponding ISR enabling bits set. This is used to send
- * HID packets to the host each time the HID interrupt endpoints polling period elapses, as managed by the USB
- * controller. It is also used to respond to standard and class specific requests send to the device on the control
- * endpoint, by handing them off to the LUFA library when they are received.
- */
-ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
-{
- /* Check if the control endpoint has received a request */
- if (Endpoint_HasEndpointInterrupted(ENDPOINT_CONTROLEP))
- {
- /* Clear the endpoint interrupt */
- Endpoint_ClearEndpointInterrupt(ENDPOINT_CONTROLEP);
-
- /* Process the control request */
- USB_USBTask();
-
- /* Handshake the endpoint setup interrupt - must be after the call to USB_USBTask() */
- USB_INT_Clear(ENDPOINT_INT_SETUP);
- }
-
- /* Check if keyboard endpoint has interrupted */
- if (Endpoint_HasEndpointInterrupted(KEYBOARD_EPNUM))
- {
- USB_KeyboardReport_Data_t KeyboardReportData;
- bool SendReport;
-
- /* Select the Keyboard Report Endpoint */
- Endpoint_SelectEndpoint(KEYBOARD_EPNUM);
-
- /* Clear the endpoint IN interrupt flag */
- USB_INT_Clear(ENDPOINT_INT_IN);
-
- /* Clear the Keyboard Report endpoint interrupt */
- Endpoint_ClearEndpointInterrupt(KEYBOARD_EPNUM);
-
- /* Create the next keyboard report for transmission to the host */
- SendReport = GetNextReport(&KeyboardReportData);
-
- /* Check if the idle period is set and has elapsed */
- if (IdleCount && !(IdleMSRemaining))
- {
- /* Idle period elapsed, indicate that a report must be sent */
- SendReport = true;
-
- /* Reset the idle time remaining counter, must multiply by 4 to get the duration in milliseconds */
- IdleMSRemaining = (IdleCount << 2);
- }
-
- /* Check to see if a report should be issued */
- if (SendReport)
- {
- /* Write Keyboard Report Data */
- Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData));
- }
-
- /* Finalize the stream transfer to send the last packet */
- Endpoint_ClearCurrentBank();
- }
-
- /* Check if Keyboard LED status Endpoint has interrupted */
- if (Endpoint_HasEndpointInterrupted(KEYBOARD_LEDS_EPNUM))
- {
- /* Select the Keyboard LED Report Endpoint */
- Endpoint_SelectEndpoint(KEYBOARD_LEDS_EPNUM);
-
- /* Clear the endpoint OUT interrupt flag */
- USB_INT_Clear(ENDPOINT_INT_OUT);
-
- /* Clear the Keyboard LED Report endpoint interrupt */
- Endpoint_ClearEndpointInterrupt(KEYBOARD_LEDS_EPNUM);
-
- /* Read in the LED report from the host */
- uint8_t LEDStatus = Endpoint_Read_Byte();
-
- /* Process the incomming LED report */
- ProcessLEDReport(LEDStatus);
-
- /* Handshake the OUT Endpoint - clear endpoint and ready for next report */
- Endpoint_ClearCurrentBank();
- }
-}
-
diff --git a/Demos/KeyboardFullInt/KeyboardFullInt.h b/Demos/KeyboardFullInt/KeyboardFullInt.h deleted file mode 100644 index cc6655a6a..000000000 --- a/Demos/KeyboardFullInt/KeyboardFullInt.h +++ /dev/null @@ -1,116 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Denver Gingerich (denver [at] ossguy [dot] com)
- Based on code by Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for KeyboardFullInt.c.
- */
-
-#ifndef _KEYBOARD_H_
-#define _KEYBOARD_H_
-
- /* Includes: */
- #include <avr/io.h>
- #include <avr/wdt.h>
- #include <avr/interrupt.h>
- #include <avr/power.h>
- #include <stdbool.h>
- #include <string.h>
-
- #include "Descriptors.h"
-
- #include <LUFA/Version.h> // Library Version Information
- #include <LUFA/Common/ButtLoadTag.h> // PROGMEM tags readable by the ButtLoad project
- #include <LUFA/Drivers/USB/USB.h> // USB Functionality
- #include <LUFA/Drivers/Board/Joystick.h> // Joystick driver
- #include <LUFA/Drivers/Board/LEDs.h> // LEDs driver
-
- /* Macros: */
- /** HID Class specific request to get the next HID report from the device. */
- #define REQ_GetReport 0x01
-
- /** HID Class specific request to get the idle timeout period of the device. */
- #define REQ_GetIdle 0x02
-
- /** HID Class specific request to send the next HID report to the device. */
- #define REQ_SetReport 0x09
-
- /** HID Class specific request to set the idle timeout period of the device. */
- #define REQ_SetIdle 0x0A
-
- /** HID Class specific request to get the current HID protocol in use, either report or boot. */
- #define REQ_GetProtocol 0x03
-
- /** HID Class specific request to set the current HID protocol in use, either report or boot. */
- #define REQ_SetProtocol 0x0B
-
- /* Type Defines: */
- /** Type define for the keyboard HID report structure, for creating and sending HID reports to the host PC.
- * This mirrors the layout described to the host in the HID report descriptor, in Descriptors.c.
- */
- typedef struct
- {
- uint8_t Modifier; /**< Modifier mask byte, containing a mask of modifier keys set (such as shift or CTRL) */
- uint8_t Reserved; /**< Reserved, always set as 0x00 */
- uint8_t KeyCode[6]; /**< Array of up to six simultaneous key codes of pressed keys */
- } USB_KeyboardReport_Data_t;
-
- /* Enums: */
- /** Enum for the possible status codes for passing to the UpdateStatus() function. */
- enum KeyboardFullInt_StatusCodes_t
- {
- Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB host) */
- Status_USBEnumerating = 1, /**< USB interface is enumerating */
- Status_USBReady = 2, /**< USB interface is connected and ready */
- };
-
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_Reset event when thrown by the library. */
- HANDLES_EVENT(USB_Reset);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
- /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
- HANDLES_EVENT(USB_UnhandledControlPacket);
-
- /* Function Prototypes: */
- bool GetNextReport(USB_KeyboardReport_Data_t* ReportData);
- void ProcessLEDReport(uint8_t LEDReport);
- void UpdateStatus(uint8_t CurrentStatus);
-
-#endif
diff --git a/Demos/KeyboardFullInt/KeyboardFullInt.txt b/Demos/KeyboardFullInt/KeyboardFullInt.txt deleted file mode 100644 index 89071188b..000000000 --- a/Demos/KeyboardFullInt/KeyboardFullInt.txt +++ /dev/null @@ -1,44 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \mainpage Fully Interrupt Driven Keyboard Device Demo
- *
- * Keyboard demonstration application, using endpoint interrupts for the
- * exchange of data to the USB host, and control requests on the control
- * endpoint. This gives a simple reference application for implementing a
- * USB Keyboard using the basic USB HID drivers in all modern OSes (i.e.
- * no special drivers required). It is boot protocol compatible, and thus
- * works under compatible BIOS as if it was a native keyboard (e.g. PS/2).
- *
- * On startup the system will automatically enumerate and function
- * as a keyboard when the USB connection to a host is present. To use
- * the keyboard example, manipulate the joystick to send the letters
- * a, b, c, d and e. See the USB HID documentation for more information
- * on sending keyboard event and keypresses.
- *
- * <table>
- * <tr>
- * <td><b>USB Mode:</b></td>
- * <td>Device</td>
- * </tr>
- * <tr>
- * <td><b>USB Class:</b></td>
- * <td>Human Interface Device (HID)</td>
- * </tr>
- * <tr>
- * <td><b>USB Subclass:</b></td>
- * <td>N/A</td>
- * </tr>
- * <tr>
- * <td><b>Relevant Standards:</b></td>
- * <td>USBIF HID Specification, USBIF HID Usage Tables</td>
- * </tr>
- * <tr>
- * <td><b>Usable Speeds:</b></td>
- * <td>Low Speed Mode, Full Speed Mode</td>
- * </tr>
- * </table>
- */
\ No newline at end of file diff --git a/Demos/KeyboardFullInt/makefile b/Demos/KeyboardFullInt/makefile deleted file mode 100644 index b3f2bd870..000000000 --- a/Demos/KeyboardFullInt/makefile +++ /dev/null @@ -1,723 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = at90usb1287
-
-
-# Target board (see library BoardTypes.h documentation, USER or blank for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = USBKEY
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-# Typical values are:
-# F_CPU = 1000000
-# F_CPU = 1843200
-# F_CPU = 2000000
-# F_CPU = 3686400
-# F_CPU = 4000000
-# F_CPU = 7372800
-# F_CPU = 8000000
-# F_CPU = 11059200
-# F_CPU = 14745600
-# F_CPU = 16000000
-# F_CPU = 18432000
-# F_CPU = 20000000
-F_CPU = 8000000
-
-
-# Input clock frequency.
-# This will define a symbol, F_CLOCK, in all source code files equal to the
-# input clock frequency (before any prescaling is performed). This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_CLOCK = 8000000
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = KeyboardFullInt
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = $(TARGET).c \
- Descriptors.c \
- ../../LUFA/Drivers/USB/LowLevel/LowLevel.c \
- ../../LUFA/Drivers/USB/LowLevel/Endpoint.c \
- ../../LUFA/Drivers/USB/LowLevel/DevChapter9.c \
- ../../LUFA/Drivers/USB/HighLevel/USBTask.c \
- ../../LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
- ../../LUFA/Drivers/USB/HighLevel/Events.c \
- ../../LUFA/Drivers/USB/HighLevel/StdDescriptors.c \
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC =
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
-
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-# AVR Studio 4.10 requires dwarf-2.
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = ../../
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD)
-CDEFS += -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DNO_STREAM_CALLBACKS -DUSB_DEVICE_ONLY
-CDEFS += -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-#CPPDEFS += -D__STDC_LIMIT_MACROS
-#CPPDEFS += -D__STDC_CONSTANT_MACROS
-
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -finline-limit=20
-CFLAGS += -Wall
-CFLAGS += -Wstrict-prototypes
-CFLAGS += -Wundef
-#CFLAGS += -fno-unit-at-a-time
-#CFLAGS += -Wunreachable-code
-#CFLAGS += -Wsign-compare
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -Wall
-CFLAGS += -Wundef
-#CPPFLAGS += -mshort-calls
-#CPPFLAGS += -fno-unit-at-a-time
-#CPPFLAGS += -Wstrict-prototypes
-#CPPFLAGS += -Wunreachable-code
-#CPPFLAGS += -Wsign-compare
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-
-
-# List any extra directories to look for libraries here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
-LDFLAGS += $(EXTMEMOPTS)
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-
-# Programming hardware: alf avr910 avrisp bascom bsd
-# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
-#
-# Type: avrdude -c ?
-# to get a full listing.
-#
-AVRDUDE_PROGRAMMER = jtagmkII
-
-# com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = usb
-
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
-# avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-checkhooks: build
- @echo
- @echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
- echo "(None)"
- @echo ------------------------------------
-
-checklibmode:
- @echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
-
-checkboard:
- @echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
-
-# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
-# a breakpoint at main().
-gdb-config:
- @$(REMOVE) $(GDBINIT_FILE)
- @echo define reset >> $(GDBINIT_FILE)
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
- @echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
- @echo load >> $(GDBINIT_FILE)
-endif
- @echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
- @$(WINSHELL) /c pause
-
-else
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
- @echo
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- @echo
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
-
-%.eep: %.elf
- @echo
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -z -S $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list clean_binary end
-
-clean_binary:
- $(REMOVE) $(TARGET).hex
-
-clean_list:
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET)eep.hex
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-
-doxygen:
- @echo Generating Project Documentation...
- @doxygen Doxygen.conf
- @echo Documentation Generation Complete.
-
-clean_doxygen:
- rm -rf Documentation
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee
\ No newline at end of file diff --git a/Demos/KeyboardViaInt/Descriptors.c b/Demos/KeyboardViaInt/Descriptors.c deleted file mode 100644 index 8e28b59ea..000000000 --- a/Demos/KeyboardViaInt/Descriptors.c +++ /dev/null @@ -1,267 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Denver Gingerich (denver [at] ossguy [dot] com)
- Based on code by Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- * computer-readable structures which the host requests upon device enumeration, to determine
- * the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- * USBIF HID class specification to describe the reports and capabilities of the HID device. This
- * descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- * the device will send, and what it may be sent back from the host. Refer to the HID specification for
- * more details on HID report descriptors.
- */
-USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
-{
- 0x05, 0x01, /* Usage Page (Generic Desktop) */
- 0x09, 0x06, /* Usage (Keyboard) */
- 0xa1, 0x01, /* Collection (Application) */
- 0x75, 0x01, /* Report Size (1) */
- 0x95, 0x08, /* Report Count (8) */
- 0x05, 0x07, /* Usage Page (Key Codes) */
- 0x19, 0xe0, /* Usage Minimum (Keyboard LeftControl) */
- 0x29, 0xe7, /* Usage Maximum (Keyboard Right GUI) */
- 0x15, 0x00, /* Logical Minimum (0) */
- 0x25, 0x01, /* Logical Maximum (1) */
- 0x81, 0x02, /* Input (Data, Variable, Absolute) */
- 0x95, 0x01, /* Report Count (1) */
- 0x75, 0x08, /* Report Size (8) */
- 0x81, 0x03, /* Input (Const, Variable, Absolute) */
- 0x95, 0x05, /* Report Count (5) */
- 0x75, 0x01, /* Report Size (1) */
- 0x05, 0x08, /* Usage Page (LEDs) */
- 0x19, 0x01, /* Usage Minimum (Num Lock) */
- 0x29, 0x05, /* Usage Maximum (Kana) */
- 0x91, 0x02, /* Output (Data, Variable, Absolute) */
- 0x95, 0x01, /* Report Count (1) */
- 0x75, 0x03, /* Report Size (3) */
- 0x91, 0x03, /* Output (Const, Variable, Absolute) */
- 0x95, 0x06, /* Report Count (6) */
- 0x75, 0x08, /* Report Size (8) */
- 0x15, 0x00, /* Logical Minimum (0) */
- 0x25, 0x65, /* Logical Maximum (101) */
- 0x05, 0x07, /* Usage Page (Keyboard) */
- 0x19, 0x00, /* Usage Minimum (Reserved (no event indicated)) */
- 0x29, 0x65, /* Usage Maximum (Keyboard Application) */
- 0x81, 0x00, /* Input (Data, Array, Absolute) */
- 0xc0 /* End Collection */
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- * device characteristics, including the supported USB version, control endpoint size and the
- * number of device configurations. The descriptor is read out by the USB host when the enumeration
- * process begins.
- */
-USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
- Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device},
-
- USBSpecification: VERSION_BCD(01.10),
- Class: 0x00,
- SubClass: 0x00,
- Protocol: 0x00,
-
- Endpoint0Size: 8,
-
- VendorID: 0x03EB,
- ProductID: 0x2042,
- ReleaseNumber: 0x0000,
-
- ManufacturerStrIndex: 0x01,
- ProductStrIndex: 0x02,
- SerialNumStrIndex: NO_DESCRIPTOR,
-
- NumberOfConfigurations: 1
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- * of the device in one of its supported configurations, including information about any device interfaces
- * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- * a configuration so that the host may correctly communicate with the USB device.
- */
-USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
- Config:
- {
- Header: {Size: sizeof(USB_Descriptor_Configuration_Header_t), Type: DTYPE_Configuration},
-
- TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t),
- TotalInterfaces: 1,
-
- ConfigurationNumber: 1,
- ConfigurationStrIndex: NO_DESCRIPTOR,
-
- ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
-
- MaxPowerConsumption: USB_CONFIG_POWER_MA(100)
- },
-
- Interface:
- {
- Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface},
-
- InterfaceNumber: 0x00,
- AlternateSetting: 0x00,
-
- TotalEndpoints: 2,
-
- Class: 0x03,
- SubClass: 0x01,
- Protocol: 0x01,
-
- InterfaceStrIndex: NO_DESCRIPTOR
- },
-
- KeyboardHID:
- {
- Header: {Size: sizeof(USB_Descriptor_HID_t), Type: DTYPE_HID},
-
- HIDSpec: VERSION_BCD(01.11),
- CountryCode: 0x00,
- TotalHIDReports: 0x01,
- HIDReportType: DTYPE_Report,
- HIDReportLength: sizeof(KeyboardReport)
- },
-
- KeyboardEndpoint:
- {
- Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
-
- EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_EPNUM),
- Attributes: EP_TYPE_INTERRUPT,
- EndpointSize: KEYBOARD_EPSIZE,
- PollingIntervalMS: 0x02
- },
-
- KeyboardLEDsEndpoint:
- {
- Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint},
-
- EndpointAddress: (ENDPOINT_DESCRIPTOR_DIR_OUT | KEYBOARD_LEDS_EPNUM),
- Attributes: EP_TYPE_INTERRUPT,
- EndpointSize: KEYBOARD_EPSIZE,
- PollingIntervalMS: 0x02
- }
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- * via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-USB_Descriptor_String_t PROGMEM LanguageString =
-{
- Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String},
-
- UnicodeString: {LANGUAGE_ID_ENG}
-};
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- * Descriptor.
- */
-USB_Descriptor_String_t PROGMEM ManufacturerString =
-{
- Header: {Size: USB_STRING_LEN(16), Type: DTYPE_String},
-
- UnicodeString: L"Denver Gingerich"
-};
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- * Descriptor.
- */
-USB_Descriptor_String_t PROGMEM ProductString =
-{
- Header: {Size: USB_STRING_LEN(18), Type: DTYPE_String},
-
- UnicodeString: L"LUFA Keyboard Demo"
-};
-
-/** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
- * documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
- * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- * USB host.
- */
-uint16_t USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
-{
- const uint8_t DescriptorType = (wValue >> 8);
- const uint8_t DescriptorNumber = (wValue & 0xFF);
-
- void* Address = NULL;
- uint16_t Size = NO_DESCRIPTOR;
-
- switch (DescriptorType)
- {
- case DTYPE_Device:
- Address = DESCRIPTOR_ADDRESS(DeviceDescriptor);
- Size = sizeof(USB_Descriptor_Device_t);
- break;
- case DTYPE_Configuration:
- Address = DESCRIPTOR_ADDRESS(ConfigurationDescriptor);
- Size = sizeof(USB_Descriptor_Configuration_t);
- break;
- case DTYPE_String:
- switch (DescriptorNumber)
- {
- case 0x00:
- Address = DESCRIPTOR_ADDRESS(LanguageString);
- Size = pgm_read_byte(&LanguageString.Header.Size);
- break;
- case 0x01:
- Address = DESCRIPTOR_ADDRESS(ManufacturerString);
- Size = pgm_read_byte(&ManufacturerString.Header.Size);
- break;
- case 0x02:
- Address = DESCRIPTOR_ADDRESS(ProductString);
- Size = pgm_read_byte(&ProductString.Header.Size);
- break;
- }
-
- break;
- case DTYPE_HID:
- Address = DESCRIPTOR_ADDRESS(ConfigurationDescriptor.KeyboardHID);
- Size = sizeof(USB_Descriptor_HID_t);
- break;
- case DTYPE_Report:
- Address = DESCRIPTOR_ADDRESS(KeyboardReport);
- Size = sizeof(KeyboardReport);
- break;
- }
-
- *DescriptorAddress = Address;
- return Size;
-}
diff --git a/Demos/KeyboardViaInt/Descriptors.h b/Demos/KeyboardViaInt/Descriptors.h deleted file mode 100644 index aa1bf05b6..000000000 --- a/Demos/KeyboardViaInt/Descriptors.h +++ /dev/null @@ -1,98 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Denver Gingerich (denver [at] ossguy [dot] com)
- Based on code by Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
- /* Includes: */
- #include <LUFA/Drivers/USB/USB.h>
-
- #include <avr/pgmspace.h>
-
- /* Type Defines: */
- /** Type define for the HID class specific HID descriptor, to describe the HID device's specifications. Refer to the HID
- * specification for details on the structure elements.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header;
-
- uint16_t HIDSpec;
- uint8_t CountryCode;
-
- uint8_t TotalHIDReports;
-
- uint8_t HIDReportType;
- uint16_t HIDReportLength;
- } USB_Descriptor_HID_t;
-
- /** Type define for the data type used to store HID report descriptor elements. */
- typedef uint8_t USB_Descriptor_HIDReport_Datatype_t;
-
- /** Type define for the device configuration descriptor structure. This must be defined in the
- * application code, as the configuration descriptor contains several sub-descriptors which
- * vary between devices, and which describe the device's usage to the host.
- */
- typedef struct
- {
- USB_Descriptor_Configuration_Header_t Config;
- USB_Descriptor_Interface_t Interface;
- USB_Descriptor_HID_t KeyboardHID;
- USB_Descriptor_Endpoint_t KeyboardEndpoint;
- USB_Descriptor_Endpoint_t KeyboardLEDsEndpoint;
- } USB_Descriptor_Configuration_t;
-
- /* Macros: */
- /** Endpoint number of the Keyboard HID reporting IN endpoint. */
- #define KEYBOARD_EPNUM 1
-
- /** Endpoint number of the Keyboard HID reporting OUT endpoint. */
- #define KEYBOARD_LEDS_EPNUM 2
-
- /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */
- #define KEYBOARD_EPSIZE 8
-
- /** Descriptor header type value, to indicate a HID class HID descriptor. */
- #define DTYPE_HID 0x21
-
- /** Descriptor header type value, to indicate a HID class HID report descriptor. */
- #define DTYPE_Report 0x22
-
- /* Function Prototypes: */
- uint16_t USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
diff --git a/Demos/KeyboardViaInt/Doxygen.conf b/Demos/KeyboardViaInt/Doxygen.conf deleted file mode 100644 index d354a312a..000000000 --- a/Demos/KeyboardViaInt/Doxygen.conf +++ /dev/null @@ -1,1485 +0,0 @@ -# Doxyfile 1.5.7.1
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project
-#
-# All text after a hash (#) is considered a comment and will be ignored
-# The format is:
-# TAG = value [value, ...]
-# For lists items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ")
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all
-# text before the first occurrence of this tag. Doxygen uses libiconv (or the
-# iconv built into libc) for the transcoding. See
-# http://www.gnu.org/software/libiconv for the list of possible encodings.
-
-DOXYFILE_ENCODING = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
-# by quotes) that should identify the project.
-
-PROJECT_NAME = "LUFA Library - Keyboard Device Demo (Via Endpoint Interrupts)"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number.
-# This could be handy for archiving the generated documentation or
-# if some version control system is used.
-
-PROJECT_NUMBER = 0.0.0
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
-# base path where the generated documentation will be put.
-# If a relative path is entered, it will be relative to the location
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
-# 4096 sub-directories (in 2 levels) under the output directory of each output
-# format and will distribute the generated files over these directories.
-# Enabling this option can be useful when feeding doxygen a huge amount of
-# source files, where putting all generated files in the same directory would
-# otherwise cause performance problems for the file system.
-
-CREATE_SUBDIRS = YES
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# The default language is English, other supported languages are:
-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
-# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek,
-# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish,
-# Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene,
-# Spanish, Swedish, and Ukrainian.
-
-OUTPUT_LANGUAGE = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
-# include brief member descriptions after the members that are listed in
-# the file and class documentation (similar to JavaDoc).
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
-# the brief description of a member or function before the detailed description.
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator
-# that is used to form the text in various listings. Each string
-# in this list, if found as the leading text of the brief description, will be
-# stripped from the text and the result after processing the whole list, is
-# used as the annotated text. Otherwise, the brief description is used as-is.
-# If left blank, the following values are used ("$name" is automatically
-# replaced with the name of the entity): "The $name class" "The $name widget"
-# "The $name file" "is" "provides" "specifies" "contains"
-# "represents" "a" "an" "the"
-
-ABBREVIATE_BRIEF = "The $name class" \
- "The $name widget" \
- "The $name file" \
- is \
- provides \
- specifies \
- contains \
- represents \
- a \
- an \
- the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# Doxygen will generate a detailed section even if there is only a brief
-# description.
-
-ALWAYS_DETAILED_SEC = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-
-INLINE_INHERITED_MEMB = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
-# path before files name in the file list and in the header files. If set
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES = YES
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
-# can be used to strip a user-defined part of the path. Stripping is
-# only done if one of the specified strings matches the left-hand part of
-# the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the
-# path to strip.
-
-STRIP_FROM_PATH =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
-# the path mentioned in the documentation of a class, which tells
-# the reader which header file to include in order to use a class.
-# If left blank only the name of the header file containing the class
-# definition is used. Otherwise one should specify the include paths that
-# are normally passed to the compiler using the -I flag.
-
-STRIP_FROM_INC_PATH =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
-# (but less readable) file names. This can be useful is your file systems
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
-# will interpret the first line (until the first dot) of a JavaDoc-style
-# comment as the brief description. If set to NO, the JavaDoc
-# comments will behave just like regular Qt-style comments
-# (thus requiring an explicit @brief command for a brief description.)
-
-JAVADOC_AUTOBRIEF = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
-# interpret the first line (until the first dot) of a Qt-style
-# comment as the brief description. If set to NO, the comments
-# will behave just like regular Qt-style comments (thus requiring
-# an explicit \brief command for a brief description.)
-
-QT_AUTOBRIEF = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
-# treat a multi-line C++ special comment block (i.e. a block of //! or ///
-# comments) as a brief description. This used to be the default behaviour.
-# The new default is to treat a multi-line C++ comment block as a detailed
-# description. Set this tag to YES if you prefer the old behaviour instead.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
-# member inherits the documentation from any documented member that it
-# re-implements.
-
-INHERIT_DOCS = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
-# a new page for each member. If set to NO, the documentation of a member will
-# be part of the file/class/namespace that contains it.
-
-SEPARATE_MEMBER_PAGES = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab.
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE = 4
-
-# This tag can be used to specify a number of aliases that acts
-# as commands in the documentation. An alias has the form "name=value".
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to
-# put the command \sideeffect (or @sideeffect) in the documentation, which
-# will result in a user-defined paragraph with heading "Side Effects:".
-# You can put \n's in the value part of an alias to insert newlines.
-
-ALIASES =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
-# sources only. Doxygen will then generate output that is more tailored for C.
-# For instance, some of the names that are used will be different. The list
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
-# sources only. Doxygen will then generate output that is more tailored for
-# Java. For instance, namespaces will be presented as packages, qualified
-# scopes will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources only. Doxygen will then generate output that is more tailored for
-# Fortran.
-
-OPTIMIZE_FOR_FORTRAN = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for
-# VHDL.
-
-OPTIMIZE_OUTPUT_VHDL = NO
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should
-# set this tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
-# func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-
-BUILTIN_STL_SUPPORT = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-
-CPP_CLI_SUPPORT = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
-# Doxygen will parse them like normal C++ but will assume all classes use public
-# instead of private inheritance when no explicit protection keyword is present.
-
-SIP_SUPPORT = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate getter
-# and setter methods for a property. Setting this option to YES (the default)
-# will make doxygen to replace the get and set methods by a property in the
-# documentation. This will only work if the methods are indeed getting or
-# setting a simple type. If this is not the case, or you want to show the
-# methods anyway, you should set this option to NO.
-
-IDL_PROPERTY_SUPPORT = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-
-DISTRIBUTE_GROUP_DOC = NO
-
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
-# the same type (for instance a group of public functions) to be put as a
-# subgroup of that type (e.g. under the Public Functions section). Set it to
-# NO to prevent subgrouping. Alternatively, this can be done per class using
-# the \nosubgrouping command.
-
-SUBGROUPING = YES
-
-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
-# is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically
-# be useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-
-TYPEDEF_HIDES_STRUCT = NO
-
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penality.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will rougly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols
-
-SYMBOL_CACHE_SIZE = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available.
-# Private class members and static file members will be hidden unless
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-
-EXTRACT_ALL = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
-# will be included in the documentation.
-
-EXTRACT_PRIVATE = YES
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file
-# will be included in the documentation.
-
-EXTRACT_STATIC = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
-# defined locally in source files will be included in the documentation.
-# If set to NO only classes defined in header files are included.
-
-EXTRACT_LOCAL_CLASSES = YES
-
-# This flag is only useful for Objective-C code. When set to YES local
-# methods, which are defined in the implementation section but not in
-# the interface are included in the documentation.
-# If set to NO (the default) only methods in the interface are included.
-
-EXTRACT_LOCAL_METHODS = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base
-# name of the file that contains the anonymous namespace. By default
-# anonymous namespace are hidden.
-
-EXTRACT_ANON_NSPACES = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
-# undocumented members of documented classes, files or namespaces.
-# If set to NO (the default) these members will be included in the
-# various overviews, but no documentation section is generated.
-# This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_MEMBERS = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy.
-# If set to NO (the default) these classes will be included in the various
-# overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_CLASSES = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
-# friend (class|struct|union) declarations.
-# If set to NO (the default) these declarations will be included in the
-# documentation.
-
-HIDE_FRIEND_COMPOUNDS = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
-# documentation blocks found inside the body of a function.
-# If set to NO (the default) these blocks will be appended to the
-# function's detailed documentation block.
-
-HIDE_IN_BODY_DOCS = NO
-
-# The INTERNAL_DOCS tag determines if documentation
-# that is typed after a \internal command is included. If the tag is set
-# to NO (the default) then the documentation will be excluded.
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
-# file names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-
-CASE_SENSE_NAMES = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
-# will show members with their full class and namespace scopes in the
-# documentation. If set to YES the scope will be hidden.
-
-HIDE_SCOPE_NAMES = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
-# will put a list of the files that are included by a file in the documentation
-# of that file.
-
-SHOW_INCLUDE_FILES = YES
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
-# is inserted in the documentation for inline members.
-
-INLINE_INFO = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
-# will sort the (detailed) documentation of file and class members
-# alphabetically by member name. If set to NO the members will appear in
-# declaration order.
-
-SORT_MEMBER_DOCS = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
-# brief documentation of file, namespace and class members alphabetically
-# by member name. If set to NO (the default) the members will appear in
-# declaration order.
-
-SORT_BRIEF_DOCS = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
-# hierarchy of group names into alphabetical order. If set to NO (the default)
-# the group names will appear in their defined order.
-
-SORT_GROUP_NAMES = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
-# sorted by fully-qualified names, including namespaces. If set to
-# NO (the default), the class list will be sorted only by class name,
-# not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the
-# alphabetical list.
-
-SORT_BY_SCOPE_NAME = NO
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or
-# disable (NO) the todo list. This list is created by putting \todo
-# commands in the documentation.
-
-GENERATE_TODOLIST = NO
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or
-# disable (NO) the test list. This list is created by putting \test
-# commands in the documentation.
-
-GENERATE_TESTLIST = NO
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or
-# disable (NO) the bug list. This list is created by putting \bug
-# commands in the documentation.
-
-GENERATE_BUGLIST = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
-# disable (NO) the deprecated list. This list is created by putting
-# \deprecated commands in the documentation.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
-# the initial value of a variable or define consists of for it to appear in
-# the documentation. If the initializer consists of more lines than specified
-# here it will be hidden. Use a value of 0 to hide initializers completely.
-# The appearance of the initializer of individual variables and defines in the
-# documentation can be controlled using \showinitializer or \hideinitializer
-# command in the documentation regardless of this setting.
-
-MAX_INITIALIZER_LINES = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
-# at the bottom of the documentation of classes and structs. If set to YES the
-# list will mention the files that were used to generate the documentation.
-
-SHOW_USED_FILES = YES
-
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
-# This will remove the Files entry from the Quick Index and from the
-# Folder Tree View (if specified). The default is YES.
-
-SHOW_FILES = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
-# Namespaces page. This will remove the Namespaces entry from the Quick Index
-# and from the Folder Tree View (if specified). The default is YES.
-
-SHOW_NAMESPACES = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command <command> <input-file>, where <command> is the value of
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
-# provided by doxygen. Whatever the program writes to standard output
-# is used as the file version. See the manual for examples.
-
-FILE_VERSION_FILTER =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
-# doxygen. The layout file controls the global structure of the generated output files
-# in an output format independent way. The create the layout file that represents
-# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
-# file name after the option, if omitted DoxygenLayout.xml will be used as the name
-# of the layout file.
-
-LAYOUT_FILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated by doxygen. Possible values are YES and NO. If left blank
-# NO is used.
-
-WARNINGS = YES
-
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
-# automatically be disabled.
-
-WARN_IF_UNDOCUMENTED = YES
-
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some
-# parameters in a documented function, or documenting parameters that
-# don't exist or using markup commands wrongly.
-
-WARN_IF_DOC_ERROR = YES
-
-# This WARN_NO_PARAMDOC option can be abled to get warnings for
-# functions that are documented, but have no documentation for their parameters
-# or return value. If set to NO (the default) doxygen will only warn about
-# wrong or incomplete parameter documentation, but not about the absence of
-# documentation.
-
-WARN_NO_PARAMDOC = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that
-# doxygen can produce. The string should contain the $file, $line, and $text
-# tags, which will be replaced by the file and line number from which the
-# warning originated and the warning text. Optionally the format may contain
-# $version, which will be replaced by the version of the file (if it could
-# be obtained via FILE_VERSION_FILTER)
-
-WARN_FORMAT = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning
-# and error messages should be written. If left blank the output is written
-# to stderr.
-
-WARN_LOGFILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that contain
-# documented source files. You may enter file names like "myfile.cpp" or
-# directories like "/usr/src/myproject". Separate the files or directories
-# with spaces.
-
-INPUT = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
-# also the default input encoding. Doxygen uses libiconv (or the iconv built
-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
-# the list of possible encodings.
-
-INPUT_ENCODING = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank the following patterns are tested:
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
-
-FILE_PATTERNS = *.h \
- *.c \
- *.txt
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories
-# should be searched for input files as well. Possible values are YES and NO.
-# If left blank NO is used.
-
-RECURSIVE = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-
-EXCLUDE =
-
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
-# directories that are symbolic links (a Unix filesystem feature) are excluded
-# from the input.
-
-EXCLUDE_SYMLINKS = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories. Note that the wildcards are matched
-# against the file with absolute path, so to exclude all test directories
-# for example use the pattern */test/*
-
-EXCLUDE_PATTERNS = */LowLevel/USBMode.h
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-
-EXCLUDE_SYMBOLS = __*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or
-# directories that contain example code fragments that are included (see
-# the \include command).
-
-EXAMPLE_PATH =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank all files are included.
-
-EXAMPLE_PATTERNS = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude
-# commands irrespective of the value of the RECURSIVE tag.
-# Possible values are YES and NO. If left blank NO is used.
-
-EXAMPLE_RECURSIVE = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or
-# directories that contain image that are included in the documentation (see
-# the \image command).
-
-IMAGE_PATH =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command <filter> <input-file>, where <filter>
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
-# input file. Doxygen will then use the output that the filter program writes
-# to standard output. If FILTER_PATTERNS is specified, this tag will be
-# ignored.
-
-INPUT_FILTER =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form:
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
-# is applied to all files.
-
-FILTER_PATTERNS =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER) will be used to filter the input files when producing source
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).
-
-FILTER_SOURCE_FILES = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will
-# be generated. Documented entities will be cross-referenced with these sources.
-# Note: To get rid of all source code in the generated output, make sure also
-# VERBATIM_HEADERS is set to NO.
-
-SOURCE_BROWSER = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
-# doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
-
-STRIP_CODE_COMMENTS = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES
-# then for each documented function all documented
-# functions referencing it will be listed.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES
-# then for each documented function all documented entities
-# called/used by that function will be listed.
-
-REFERENCES_RELATION = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
-# link to the source code. Otherwise they will link to the documentstion.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If the USE_HTAGS tag is set to YES then the references to source code
-# will point to the HTML generated by the htags(1) tool instead of doxygen
-# built-in source browser. The htags tool is part of GNU's global source
-# tagging system (see http://www.gnu.org/software/global/global.html). You
-# will need version 4.8.6 or higher.
-
-USE_HTAGS = NO
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
-# will generate a verbatim copy of the header file for each class for
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
-# of all compounds will be generated. Enable this if the project
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX = YES
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX = 5
-
-# In case all classes in a project start with a common prefix, all
-# classes will be put under the same header in the alphabetical index.
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX =
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
-# generate HTML output.
-
-GENERATE_HTML = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
-# doxygen will generate files with .html extension.
-
-HTML_FILE_EXTENSION = .html
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard header.
-
-HTML_HEADER =
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard footer.
-
-HTML_FOOTER =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
-# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
-# stylesheet in the HTML output directory as well, or it will be erased!
-
-HTML_STYLESHEET =
-
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
-
-HTML_DYNAMIC_SECTIONS = YES
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files
-# will be generated that can be used as input for Apple's Xcode 3
-# integrated development environment, introduced with OSX 10.5 (Leopard).
-# To create a documentation set, doxygen will generate a Makefile in the
-# HTML output directory. Running make will produce the docset in that
-# directory and running "make install" will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
-# it at startup.
-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
-
-GENERATE_DOCSET = NO
-
-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
-# feed. A documentation feed provides an umbrella under which multiple
-# documentation sets from a single provider (such as a company or product suite)
-# can be grouped.
-
-DOCSET_FEEDNAME = "Doxygen generated docs"
-
-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
-# should uniquely identify the documentation set bundle. This should be a
-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
-# will append .docset to the name.
-
-DOCSET_BUNDLE_ID = org.doxygen.Project
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files
-# will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
-# be used to specify the file name of the resulting .chm file. You
-# can add a path in front of the file if the result should not be
-# written to the html output directory.
-
-CHM_FILE =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
-# be used to specify the location (absolute path including file name) of
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
-# the HTML help compiler on the generated index.hhp.
-
-HHC_LOCATION =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
-# controls if a separate .chi index file is generated (YES) or that
-# it should be included in the master .chm file (NO).
-
-GENERATE_CHI = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
-# is used to encode HtmlHelp index (hhk), content (hhc) and project file
-# content.
-
-CHM_INDEX_ENCODING =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
-# controls whether a binary table of contents is generated (YES) or a
-# normal table of contents (NO) in the .chm file.
-
-BINARY_TOC = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members
-# to the contents of the HTML help documentation and to the tree view.
-
-TOC_EXPAND = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
-# are set, an additional index file will be generated that can be used as input for
-# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
-# HTML documentation.
-
-GENERATE_QHP = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
-# be used to specify the file name of the resulting .qch file.
-# The path specified is relative to the HTML output folder.
-
-QCH_FILE =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# <a href="http://doc.trolltech.com/qthelpproject.html#namespace">Qt Help Project / Namespace</a>.
-
-QHP_NAMESPACE = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# <a href="http://doc.trolltech.com/qthelpproject.html#virtual-folders">Qt Help Project / Virtual Folders</a>.
-
-QHP_VIRTUAL_FOLDER = doc
-
-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
-# be used to specify the location of Qt's qhelpgenerator.
-# If non-empty doxygen will try to run qhelpgenerator on the generated
-# .qhp file .
-
-QHG_LOCATION =
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
-# top of each HTML page. The value NO (the default) enables the index and
-# the value YES disables it.
-
-DISABLE_INDEX = NO
-
-# This tag can be used to set the number of enum values (range [1..20])
-# that doxygen will group on one line in the generated HTML documentation.
-
-ENUM_VALUES_PER_LINE = 1
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information.
-# If the tag value is set to FRAME, a side panel will be generated
-# containing a tree-like index structure (just like the one that
-# is generated for HTML Help). For this to work a browser that supports
-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
-# probably better off using the HTML help feature. Other possible values
-# for this tag are: HIERARCHIES, which will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list;
-# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which
-# disables this behavior completely. For backwards compatibility with previous
-# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE
-# respectively.
-
-GENERATE_TREEVIEW = YES
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
-# used to set the initial width (in pixels) of the frame in which the tree
-# is shown.
-
-TREEVIEW_WIDTH = 250
-
-# Use this tag to change the font size of Latex formulas included
-# as images in the HTML documentation. The default is 10. Note that
-# when you change the font size after a successful doxygen run you need
-# to manually remove any form_*.png images from the HTML output directory
-# to force them to be regenerated.
-
-FORMULA_FONTSIZE = 10
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
-# generate Latex output.
-
-GENERATE_LATEX = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked. If left blank `latex' will be used as the default command name.
-
-LATEX_CMD_NAME = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
-# default command name.
-
-MAKEINDEX_CMD_NAME = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_LATEX = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, a4wide, letter, legal and
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS = YES
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
-# higher quality PDF documentation.
-
-USE_PDFLATEX = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE = NO
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
-# in the output.
-
-LATEX_HIDE_INDICES = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
-# The RTF output is optimized for Word 97 and may not look very pretty with
-# other RTF readers or editors.
-
-GENERATE_RTF = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT = rtf
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
-# RTF documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_RTF = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
-# will contain hyperlink fields. The RTF file will
-# contain links (just like the HTML output) instead of page references.
-# This makes the output suitable for online browsing using WORD or other
-# programs which support those fields.
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
-# config file, i.e. a series of assignments. You only have to provide
-# replacements, missing definitions are set to their default value.
-
-RTF_STYLESHEET_FILE =
-
-# Set optional variables used in the generation of an rtf document.
-# Syntax is similar to doxygen's config file.
-
-RTF_EXTENSIONS_FILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
-# generate man pages
-
-GENERATE_MAN = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT = man
-
-# The MAN_EXTENSION tag determines the extension that is added to
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION = .3
-
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
-# then it will generate one additional man file for each entity
-# documented in the real man page(s). These additional files
-# only source the real man page, but without them the man command
-# would be unable to find the correct page. The default is NO.
-
-MAN_LINKS = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES Doxygen will
-# generate an XML file that captures the structure of
-# the code including all documentation.
-
-GENERATE_XML = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD =
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING = YES
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
-# generate an AutoGen Definitions (see autogen.sf.net) file
-# that captures the structure of the code including all
-# documentation. Note that this feature is still experimental
-# and incomplete at the moment.
-
-GENERATE_AUTOGEN_DEF = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will
-# generate a Perl module file that captures the structure of
-# the code including all documentation. Note that this
-# feature is still experimental and incomplete at the
-# moment.
-
-GENERATE_PERLMOD = NO
-
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able
-# to generate PDF and DVI output from the Perl module output.
-
-PERLMOD_LATEX = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
-# nicely formatted so it can be parsed by a human reader. This is useful
-# if you want to understand what is going on. On the other hand, if this
-# tag is set to NO the size of the Perl module output will be much smaller
-# and Perl will parse it just the same.
-
-PERLMOD_PRETTY = YES
-
-# The names of the make variables in the generated doxyrules.make file
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
-# This is useful so different doxyrules.make files included by the same
-# Makefile don't overwrite each other's variables.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
-# evaluate all C-preprocessor directives found in the sources and include
-# files.
-
-ENABLE_PREPROCESSING = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
-# names in the source code. If set to NO (the default) only conditional
-# compilation will be performed. Macro expansion can be done in a controlled
-# way by setting EXPAND_ONLY_PREDEF to YES.
-
-MACRO_EXPANSION = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
-# then the macro expansion is limited to the macros specified with the
-# PREDEFINED and EXPAND_AS_DEFINED tags.
-
-EXPAND_ONLY_PREDEF = YES
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
-
-SEARCH_INCLUDES = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by
-# the preprocessor.
-
-INCLUDE_PATH =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will
-# be used.
-
-INCLUDE_FILE_PATTERNS =
-
-# The PREDEFINED tag can be used to specify one or more macro names that
-# are defined before the preprocessor is started (similar to the -D option of
-# gcc). The argument of the tag is a list of macros of the form: name
-# or name=definition (no spaces). If the definition and the = are
-# omitted =1 is assumed. To prevent a macro definition from being
-# undefined via #undef or recursively expanded use the := operator
-# instead of the = operator.
-
-PREDEFINED = __DOXYGEN__
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
-# this tag can be used to specify a list of macro names that should be expanded.
-# The macro definition that is found in the sources will be used.
-# Use the PREDEFINED tag if you want to use a different macro definition.
-
-EXPAND_AS_DEFINED = BUTTLOADTAG
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
-# doxygen's preprocessor will remove all function-like macros that are alone
-# on a line, have an all uppercase name, and do not end with a semicolon. Such
-# function macros are typically used for boiler-plate code, and will confuse
-# the parser if not removed.
-
-SKIP_FUNCTION_MACROS = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES option can be used to specify one or more tagfiles.
-# Optionally an initial location of the external documentation
-# can be added for each tagfile. The format of a tag file without
-# this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths or
-# URLs. If a location is present for each tag, the installdox tool
-# does not have to be run to correct the links.
-# Note that each tag file must have a unique name
-# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen
-# is run, you must also specify the path to the tagfile here.
-
-TAGFILES =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE =
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed
-# in the class index. If set to NO only the inherited external classes
-# will be listed.
-
-ALLEXTERNALS = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will
-# be listed.
-
-EXTERNAL_GROUPS = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
-# or super classes. Setting the tag to NO turns the diagrams off. Note that
-# this option is superseded by the HAVE_DOT option below. This is only a
-# fallback. It is recommended to install and use dot, since it yields more
-# powerful graphs.
-
-CLASS_DIAGRAMS = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see
-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH =
-
-# If set to YES, the inheritance and collaboration graphs will hide
-# inheritance and usage relations if the target is undocumented
-# or is not a class.
-
-HIDE_UNDOC_RELATIONS = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz, a graph visualization
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT = NO
-
-# By default doxygen will write a font called FreeSans.ttf to the output
-# directory and reference it in all dot files that doxygen generates. This
-# font does not include all possible unicode characters however, so when you need
-# these (or just want a differently looking font) you can specify the font name
-# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
-# which can be done by putting it in a standard location or by setting the
-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
-# containing the font.
-
-DOT_FONTNAME = FreeSans
-
-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
-# The default size is 10pt.
-
-DOT_FONTSIZE = 10
-
-# By default doxygen will tell dot to use the output directory to look for the
-# FreeSans.ttf font (which doxygen will put there itself). If you specify a
-# different font using DOT_FONTNAME you can set the path where dot
-# can find it using this tag.
-
-DOT_FONTPATH =
-
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect inheritance relations. Setting this tag to YES will force the
-# the CLASS_DIAGRAMS tag to NO.
-
-CLASS_GRAPH = NO
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect implementation dependencies (inheritance, containment, and
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH = NO
-
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for groups, showing the direct groups dependencies
-
-GROUP_GRAPHS = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-
-UML_LOOK = NO
-
-# If set to YES, the inheritance and collaboration graphs will show the
-# relations between templates and their instances.
-
-TEMPLATE_RELATIONS = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
-# tags are set to YES then doxygen will generate a graph for each documented
-# file showing the direct and indirect include dependencies of the file with
-# other documented files.
-
-INCLUDE_GRAPH = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
-# documented header file showing the documented files that directly or
-# indirectly include this file.
-
-INCLUDED_BY_GRAPH = NO
-
-# If the CALL_GRAPH and HAVE_DOT options are set to YES then
-# doxygen will generate a call dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable call graphs
-# for selected functions only using the \callgraph command.
-
-CALL_GRAPH = NO
-
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
-# doxygen will generate a caller dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable caller
-# graphs for selected functions only using the \callergraph command.
-
-CALLER_GRAPH = NO
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
-# will graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY = NO
-
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
-# then doxygen will show the dependencies a directory has on other directories
-# in a graphical way. The dependency relations are determined by the #include
-# relations between the files in the directories.
-
-DIRECTORY_GRAPH = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. Possible values are png, jpg, or gif
-# If left blank png will be used.
-
-DOT_IMAGE_FORMAT = png
-
-# The tag DOT_PATH can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-
-DOT_PATH = "C:/Program Files/Graphviz2.18/bin"
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the
-# \dotfile command).
-
-DOTFILE_DIRS =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
-# nodes that will be shown in the graph. If the number of nodes in a graph
-# becomes larger than this value, doxygen will truncate the graph, which is
-# visualized by representing a node as a red box. Note that doxygen if the
-# number of direct children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-
-DOT_GRAPH_MAX_NODES = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
-# graphs generated by dot. A depth value of 3 means that only nodes reachable
-# from the root by following a path via at most 3 edges will be shown. Nodes
-# that lay further from the root node will be omitted. Note that setting this
-# option to 1 or 2 may greatly reduce the computation time needed for large
-# code bases. Also note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-
-MAX_DOT_GRAPH_DEPTH = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not
-# seem to support this out of the box. Warning: Depending on the platform used,
-# enabling this option may lead to badly anti-aliased labels on the edges of
-# a graph (i.e. they become hard to read).
-
-DOT_TRANSPARENT = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10)
-# support this, this feature is disabled by default.
-
-DOT_MULTI_TARGETS = NO
-
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
-# generate a legend page explaining the meaning of the various boxes and
-# arrows in the dot generated graphs.
-
-GENERATE_LEGEND = YES
-
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
-# remove the intermediate dot files that are used to generate
-# the various graphs.
-
-DOT_CLEANUP = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine
-#---------------------------------------------------------------------------
-
-# The SEARCHENGINE tag specifies whether or not a search engine should be
-# used. If set to NO the values of all tags below this one will be ignored.
-
-SEARCHENGINE = NO
diff --git a/Demos/KeyboardViaInt/KeyboardViaInt.aps b/Demos/KeyboardViaInt/KeyboardViaInt.aps deleted file mode 100644 index d31b4a0f9..000000000 --- a/Demos/KeyboardViaInt/KeyboardViaInt.aps +++ /dev/null @@ -1 +0,0 @@ -<AVRStudio><MANAGEMENT><ProjectName>KeyboardViaInt</ProjectName><Created>30-Sep-2008 14:11:35</Created><LastEdit>30-Sep-2008 14:11:49</LastEdit><ICON>241</ICON><ProjectType>0</ProjectType><Created>30-Sep-2008 14:11:35</Created><Version>4</Version><Build>4, 14, 0, 589</Build><ProjectTypeName>AVR GCC</ProjectTypeName></MANAGEMENT><CODE_CREATION><ObjectFile></ObjectFile><EntryFile></EntryFile><SaveFolder>C:\Users\Dean\Documents\Electronics\Projects\WORK\MyUSBWORK\Demos\KeyboardViaInt\</SaveFolder></CODE_CREATION><DEBUG_TARGET><CURRENT_TARGET></CURRENT_TARGET><CURRENT_PART></CURRENT_PART><BREAKPOINTS></BREAKPOINTS><IO_EXPAND><HIDE>false</HIDE></IO_EXPAND><REGISTERNAMES><Register>R00</Register><Register>R01</Register><Register>R02</Register><Register>R03</Register><Register>R04</Register><Register>R05</Register><Register>R06</Register><Register>R07</Register><Register>R08</Register><Register>R09</Register><Register>R10</Register><Register>R11</Register><Register>R12</Register><Register>R13</Register><Register>R14</Register><Register>R15</Register><Register>R16</Register><Register>R17</Register><Register>R18</Register><Register>R19</Register><Register>R20</Register><Register>R21</Register><Register>R22</Register><Register>R23</Register><Register>R24</Register><Register>R25</Register><Register>R26</Register><Register>R27</Register><Register>R28</Register><Register>R29</Register><Register>R30</Register><Register>R31</Register></REGISTERNAMES><COM></COM><COMType>0</COMType><WATCHNUM>0</WATCHNUM><WATCHNAMES><Pane0></Pane0><Pane1></Pane1><Pane2></Pane2><Pane3></Pane3></WATCHNAMES><BreakOnTrcaeFull>0</BreakOnTrcaeFull></DEBUG_TARGET><Debugger><Triggers></Triggers></Debugger><AVRGCCPLUGIN><FILES><SOURCEFILE>Descriptors.c</SOURCEFILE><SOURCEFILE>KeyboardViaInt.c</SOURCEFILE><HEADERFILE>Descriptors.h</HEADERFILE><HEADERFILE>KeyboardViaInt.h</HEADERFILE><OTHERFILE>makefile</OTHERFILE></FILES><CONFIGS><CONFIG><NAME>default</NAME><USESEXTERNALMAKEFILE>YES</USESEXTERNALMAKEFILE><EXTERNALMAKEFILE>makefile</EXTERNALMAKEFILE><PART>atmega128</PART><HEX>1</HEX><LIST>1</LIST><MAP>1</MAP><OUTPUTFILENAME>KeyboardViaInt.elf</OUTPUTFILENAME><OUTPUTDIR>default\</OUTPUTDIR><ISDIRTY>1</ISDIRTY><OPTIONS/><INCDIRS/><LIBDIRS/><LIBS/><LINKOBJECTS/><OPTIONSFORALL>-Wall -gdwarf-2 -std=gnu99 -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums</OPTIONSFORALL><LINKEROPTIONS></LINKEROPTIONS><SEGMENTS/></CONFIG></CONFIGS><LASTCONFIG>default</LASTCONFIG><USES_WINAVR>1</USES_WINAVR><GCC_LOC>C:\WinAVR-20080512\bin\avr-gcc.exe</GCC_LOC><MAKE_LOC>C:\WinAVR-20080512\utils\bin\make.exe</MAKE_LOC></AVRGCCPLUGIN><IOView><usergroups/><sort sorted="0" column="0" ordername="0" orderaddress="0" ordergroup="0"/></IOView><Files></Files><Events><Bookmarks></Bookmarks></Events><Trace><Filters></Filters></Trace></AVRStudio>
diff --git a/Demos/KeyboardViaInt/KeyboardViaInt.c b/Demos/KeyboardViaInt/KeyboardViaInt.c deleted file mode 100644 index 1e724e6fa..000000000 --- a/Demos/KeyboardViaInt/KeyboardViaInt.c +++ /dev/null @@ -1,461 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Denver Gingerich (denver [at] ossguy [dot] com)
- Based on code by Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Main source file for the KeyboardViaInt demo. This file contains the main tasks of the demo and
- * is responsible for the initial application hardware configuration.
- */
-
-#include "KeyboardViaInt.h"
-
-/* Project Tags, for reading out using the ButtLoad project */
-BUTTLOADTAG(ProjName, "LUFA KeyboardI App");
-BUTTLOADTAG(BuildTime, __TIME__);
-BUTTLOADTAG(BuildDate, __DATE__);
-BUTTLOADTAG(LUFAVersion, "LUFA V" LUFA_VERSION_STRING);
-
-/* Scheduler Task List */
-TASK_LIST
-{
- { Task: USB_USBTask , TaskStatus: TASK_STOP },
-};
-
-/* Global Variables */
-/** Indicates what report mode the host has requested, true for normal HID reporting mode, false for special boot
- * protocol reporting mode.
- */
-bool UsingReportProtocol = true;
-
-/** Current Idle period. This is set by the host via a Set Idle HID class request to silence the device's reports
- * for either the entire idle duration, or until the report status changes (e.g. the user moves the mouse).
- */
-uint8_t IdleCount = 0;
-
-/** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle
- * milliseconds. This is seperate to the IdleCount timer and is incremented and compared as the host may request
- * the current idle period via a Get Idle HID class request, thus its value must be preserved.
- */
-uint16_t IdleMSRemaining = 0;
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- * starts the scheduler to run the USB management task.
- */
-int main(void)
-{
- /* Disable watchdog if enabled by bootloader/fuses */
- MCUSR &= ~(1 << WDRF);
- wdt_disable();
-
- /* Disable clock division */
- clock_prescale_set(clock_div_1);
-
- /* Hardware Initialization */
- Joystick_Init();
- LEDs_Init();
-
- /* Millisecond timer initialization, with output compare interrupt enabled for the idle timing */
- OCR0A = 0x7D;
- TCCR0A = (1 << WGM01);
- TCCR0B = ((1 << CS01) | (1 << CS00));
- TIMSK0 = (1 << OCIE0A);
-
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
-
- /* Initialize Scheduler so that it can be used */
- Scheduler_Init();
-
- /* Initialize USB Subsystem */
- USB_Init();
-
- /* Scheduling - routine never returns, so put this last in the main function */
- Scheduler_Start();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
- * starts the library USB task to begin the enumeration and USB management process.
- */
-EVENT_HANDLER(USB_Connect)
-{
- /* Start USB management task */
- Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
-
- /* Indicate USB enumerating */
- UpdateStatus(Status_USBEnumerating);
-
- /* Default to report protocol on connect */
- UsingReportProtocol = true;
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- * the status LEDs and stops the USB management task.
- */
-EVENT_HANDLER(USB_Disconnect)
-{
- /* Stop running keyboard reporting and USB management tasks */
- Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
-
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
- * of the USB device after enumeration, and configures the keyboard device endpoints.
- */
-EVENT_HANDLER(USB_ConfigurationChanged)
-{
- /* Setup Keyboard Keycode Report Endpoint */
- Endpoint_ConfigureEndpoint(KEYBOARD_EPNUM, EP_TYPE_INTERRUPT,
- ENDPOINT_DIR_IN, KEYBOARD_EPSIZE,
- ENDPOINT_BANK_SINGLE);
-
- /* Enable the endpoint IN interrupt ISR for the report endpoint */
- USB_INT_Enable(ENDPOINT_INT_IN);
-
- /* Setup Keyboard LED Report Endpoint */
- Endpoint_ConfigureEndpoint(KEYBOARD_LEDS_EPNUM, EP_TYPE_INTERRUPT,
- ENDPOINT_DIR_OUT, KEYBOARD_EPSIZE,
- ENDPOINT_BANK_SINGLE);
-
- /* Enable the endpoint OUT interrupt ISR for the LED report endpoint */
- USB_INT_Enable(ENDPOINT_INT_OUT);
-
- /* Indicate USB connected and ready */
- UpdateStatus(Status_USBReady);
-}
-
-/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific
- * control requests that are not handled internally by the USB library (including the HID commands, which are
- * all issued via the control endpoint), so that they can be handled appropriately for the application.
- */
-EVENT_HANDLER(USB_UnhandledControlPacket)
-{
- /* Handle HID Class specific requests */
- switch (bRequest)
- {
- case REQ_GetReport:
- if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- USB_KeyboardReport_Data_t KeyboardReportData;
-
- /* Create the next keyboard report for transmission to the host */
- GetNextReport(&KeyboardReportData);
-
- /* Ignore report type and ID number value */
- Endpoint_Discard_Word();
-
- /* Ignore unused Interface number value */
- Endpoint_Discard_Word();
-
- /* Read in the number of bytes in the report to send to the host */
- uint16_t wLength = Endpoint_Read_Word_LE();
-
- /* If trying to send more bytes than exist to the host, clamp the value at the report size */
- if (wLength > sizeof(KeyboardReportData))
- wLength = sizeof(KeyboardReportData);
-
- Endpoint_ClearSetupReceived();
-
- /* Write the report data to the control endpoint */
- Endpoint_Write_Control_Stream_LE(&KeyboardReportData, wLength);
-
- /* Finalize the stream transfer to send the last packet or clear the host abort */
- Endpoint_ClearSetupOUT();
- }
-
- break;
- case REQ_SetReport:
- if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSetupReceived();
-
- /* Wait until the LED report has been sent by the host */
- while (!(Endpoint_IsSetupOUTReceived()));
-
- /* Read in the LED report from the host */
- uint8_t LEDStatus = Endpoint_Read_Byte();
-
- /* Process the incomming LED report */
- ProcessLEDReport(LEDStatus);
-
- /* Clear the endpoint data */
- Endpoint_ClearSetupOUT();
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsSetupINReady()));
- Endpoint_ClearSetupIN();
- }
-
- break;
- case REQ_GetProtocol:
- if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSetupReceived();
-
- /* Write the current protocol flag to the host */
- Endpoint_Write_Byte(UsingReportProtocol);
-
- /* Send the flag to the host */
- Endpoint_ClearSetupIN();
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsSetupOUTReceived()));
- Endpoint_ClearSetupOUT();
- }
-
- break;
- case REQ_SetProtocol:
- if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- /* Read in the wValue parameter containing the new protocol mode */
- uint16_t wValue = Endpoint_Read_Word_LE();
-
- Endpoint_ClearSetupReceived();
-
- /* Set or clear the flag depending on what the host indicates that the current Protocol should be */
- UsingReportProtocol = (wValue != 0x0000);
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsSetupINReady()));
- Endpoint_ClearSetupIN();
- }
-
- break;
- case REQ_SetIdle:
- if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- /* Read in the wValue parameter containing the idle period */
- uint16_t wValue = Endpoint_Read_Word_LE();
-
- Endpoint_ClearSetupReceived();
-
- /* Get idle period in MSB */
- IdleCount = (wValue >> 8);
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsSetupINReady()));
- Endpoint_ClearSetupIN();
- }
-
- break;
- case REQ_GetIdle:
- if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSetupReceived();
-
- /* Write the current idle duration to the host */
- Endpoint_Write_Byte(IdleCount);
-
- /* Send the flag to the host */
- Endpoint_ClearSetupIN();
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsSetupOUTReceived()));
- Endpoint_ClearSetupOUT();
- }
-
- break;
- }
-}
-
-/** ISR for the timer 0 compare vector. This ISR fires once each millisecond, and increments the
- * scheduler elapsed idle period counter when the host has set an idle period.
- */
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
-{
- /* One millisecond has elapsed, decrement the idle time remaining counter if it has not already elapsed */
- if (IdleMSRemaining)
- IdleMSRemaining--;
-}
-
-/** Fills the given HID report data structure with the next HID report to send to the host.
- *
- * \param ReportData Pointer to a HID report data structure to be filled
- *
- * \return Boolean true if the new report differs from the last report, false otherwise
- */
-bool GetNextReport(USB_KeyboardReport_Data_t* ReportData)
-{
- static uint8_t PrevJoyStatus = 0;
- uint8_t JoyStatus_LCL = Joystick_GetStatus();
- bool InputChanged = false;
-
- /* Clear the report contents */
- memset(ReportData, 0, sizeof(USB_KeyboardReport_Data_t));
-
- if (JoyStatus_LCL & JOY_UP)
- ReportData->KeyCode[0] = 0x04; // A
- else if (JoyStatus_LCL & JOY_DOWN)
- ReportData->KeyCode[0] = 0x05; // B
-
- if (JoyStatus_LCL & JOY_LEFT)
- ReportData->KeyCode[0] = 0x06; // C
- else if (JoyStatus_LCL & JOY_RIGHT)
- ReportData->KeyCode[0] = 0x07; // D
-
- if (JoyStatus_LCL & JOY_PRESS)
- ReportData->KeyCode[0] = 0x08; // E
-
- /* Check if the new report is different to the previous report */
- InputChanged = (uint8_t)(PrevJoyStatus ^ JoyStatus_LCL);
-
- /* Save the current joystick status for later comparison */
- PrevJoyStatus = JoyStatus_LCL;
-
- /* Return whether the new report is different to the previous report or not */
- return InputChanged;
-}
-
-/** Processes a given LED report mask from the host and sets the board LEDs to match.
- *
- * \param LEDReport LED mask from the host, containing a mask of what LEDs are set
- */
-void ProcessLEDReport(uint8_t LEDReport)
-{
- uint8_t LEDMask = LEDS_LED2;
-
- if (LEDReport & 0x01) // NUM Lock
- LEDMask |= LEDS_LED1;
-
- if (LEDReport & 0x02) // CAPS Lock
- LEDMask |= LEDS_LED3;
-
- if (LEDReport & 0x04) // SCROLL Lock
- LEDMask |= LEDS_LED4;
-
- /* Set the status LEDs to the current Keyboard LED status */
- LEDs_SetAllLEDs(LEDMask);
-}
-
-/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
- * log to a serial port, or anything else that is suitable for status updates.
- *
- * \param CurrentStatus Current status of the system, from the KeyboardViaInt_StatusCodes_t enum
- */
-void UpdateStatus(uint8_t CurrentStatus)
-{
- uint8_t LEDMask = LEDS_NO_LEDS;
-
- /* Set the LED mask to the appropriate LED mask based on the given status code */
- switch (CurrentStatus)
- {
- case Status_USBNotReady:
- LEDMask = (LEDS_LED1);
- break;
- case Status_USBEnumerating:
- LEDMask = (LEDS_LED1 | LEDS_LED2);
- break;
- case Status_USBReady:
- LEDMask = (LEDS_LED2 | LEDS_LED4);
- break;
- }
-
- /* Set the board LEDs to the new LED mask */
- LEDs_SetAllLEDs(LEDMask);
-}
-
-/** ISR for the general Pipe/Endpoint interrupt vector. This ISR fires when an endpoint's status changes (such as
- * a packet has been received) on an endpoint with its corresponding ISR enabling bits set. This is used to send
- * HID packets to the host each time the HID interrupt endpoints polling period elapses, as managed by the USB
- * controller.
- */
-ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
-{
- /* Save previously selected endpoint before selecting a new endpoint */
- uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint();
-
- /* Check if keyboard endpoint has interrupted */
- if (Endpoint_HasEndpointInterrupted(KEYBOARD_EPNUM))
- {
- USB_KeyboardReport_Data_t KeyboardReportData;
- bool SendReport;
-
- /* Select the Keyboard Report Endpoint */
- Endpoint_SelectEndpoint(KEYBOARD_EPNUM);
-
- /* Clear the endpoint IN interrupt flag */
- USB_INT_Clear(ENDPOINT_INT_IN);
-
- /* Clear the Keyboard Report endpoint interrupt */
- Endpoint_ClearEndpointInterrupt(KEYBOARD_EPNUM);
-
- /* Create the next keyboard report for transmission to the host */
- SendReport = GetNextReport(&KeyboardReportData);
-
- /* Check if the idle period is set and has elapsed */
- if (IdleCount && !(IdleMSRemaining))
- {
- /* Idle period elapsed, indicate that a report must be sent */
- SendReport = true;
-
- /* Reset the idle time remaining counter, must multiply by 4 to get the duration in milliseconds */
- IdleMSRemaining = (IdleCount << 2);
- }
-
- /* Check to see if a report should be issued */
- if (SendReport)
- {
- /* Write Keyboard Report Data */
- Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData));
- }
-
- /* Finalize the stream transfer to send the last packet */
- Endpoint_ClearCurrentBank();
- }
-
- /* Check if Keyboard LED status Endpoint has interrupted */
- if (Endpoint_HasEndpointInterrupted(KEYBOARD_LEDS_EPNUM))
- {
- /* Select the Keyboard LED Report Endpoint */
- Endpoint_SelectEndpoint(KEYBOARD_LEDS_EPNUM);
-
- /* Clear the endpoint OUT interrupt flag */
- USB_INT_Clear(ENDPOINT_INT_OUT);
-
- /* Clear the Keyboard LED Report endpoint interrupt */
- Endpoint_ClearEndpointInterrupt(KEYBOARD_LEDS_EPNUM);
-
- /* Read in the LED report from the host */
- uint8_t LEDStatus = Endpoint_Read_Byte();
-
- /* Process the incomming LED report */
- ProcessLEDReport(LEDStatus);
-
- /* Handshake the OUT Endpoint - clear endpoint and ready for next report */
- Endpoint_ClearCurrentBank();
- }
-
- /* Restore previously selected endpoint */
- Endpoint_SelectEndpoint(PrevSelectedEndpoint);
-}
-
diff --git a/Demos/KeyboardViaInt/KeyboardViaInt.h b/Demos/KeyboardViaInt/KeyboardViaInt.h deleted file mode 100644 index 7dfe60d19..000000000 --- a/Demos/KeyboardViaInt/KeyboardViaInt.h +++ /dev/null @@ -1,113 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Denver Gingerich (denver [at] ossguy [dot] com)
- Based on code by Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for KeyboardViaInt.c.
- */
-
-#ifndef _KEYBOARD_H_
-#define _KEYBOARD_H_
-
- /* Includes: */
- #include <avr/io.h>
- #include <avr/wdt.h>
- #include <avr/interrupt.h>
- #include <avr/power.h>
- #include <stdbool.h>
- #include <string.h>
-
- #include "Descriptors.h"
-
- #include <LUFA/Version.h> // Library Version Information
- #include <LUFA/Common/ButtLoadTag.h> // PROGMEM tags readable by the ButtLoad project
- #include <LUFA/Drivers/USB/USB.h> // USB Functionality
- #include <LUFA/Drivers/Board/Joystick.h> // Joystick driver
- #include <LUFA/Drivers/Board/LEDs.h> // LEDs driver
-
- /* Macros: */
- /** HID Class specific request to get the next HID report from the device. */
- #define REQ_GetReport 0x01
-
- /** HID Class specific request to get the idle timeout period of the device. */
- #define REQ_GetIdle 0x02
-
- /** HID Class specific request to send the next HID report to the device. */
- #define REQ_SetReport 0x09
-
- /** HID Class specific request to set the idle timeout period of the device. */
- #define REQ_SetIdle 0x0A
-
- /** HID Class specific request to get the current HID protocol in use, either report or boot. */
- #define REQ_GetProtocol 0x03
-
- /** HID Class specific request to set the current HID protocol in use, either report or boot. */
- #define REQ_SetProtocol 0x0B
-
- /* Type Defines: */
- /** Type define for the keyboard HID report structure, for creating and sending HID reports to the host PC.
- * This mirrors the layout described to the host in the HID report descriptor, in Descriptors.c.
- */
- typedef struct
- {
- uint8_t Modifier; /**< Modifier mask byte, containing a mask of modifier keys set (such as shift or CTRL) */
- uint8_t Reserved; /**< Reserved, always set as 0x00 */
- uint8_t KeyCode[6]; /**< Array of up to six simultaneous key codes of pressed keys */
- } USB_KeyboardReport_Data_t;
-
- /* Enums: */
- /** Enum for the possible status codes for passing to the UpdateStatus() function. */
- enum KeyboardViaInt_StatusCodes_t
- {
- Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB host) */
- Status_USBEnumerating = 1, /**< USB interface is enumerating */
- Status_USBReady = 2, /**< USB interface is connected and ready */
- };
-
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
- /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
- HANDLES_EVENT(USB_UnhandledControlPacket);
-
- /* Function Prototypes: */
- bool GetNextReport(USB_KeyboardReport_Data_t* ReportData);
- void ProcessLEDReport(uint8_t LEDReport);
- void UpdateStatus(uint8_t CurrentStatus);
-
-#endif
diff --git a/Demos/KeyboardViaInt/KeyboardViaInt.txt b/Demos/KeyboardViaInt/KeyboardViaInt.txt deleted file mode 100644 index 02ee7592d..000000000 --- a/Demos/KeyboardViaInt/KeyboardViaInt.txt +++ /dev/null @@ -1,44 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \mainpage Partially Interrupt Driven Keyboard Device Demo
- *
- * Keyboard demonstration application, using endpoint interrupts for the
- * exchange of data to the USB host. This gives a simple reference
- * application for implementing a USB Keyboard using the basic USB HID
- * drivers in all modern OSes (i.e. no special drivers required). It is
- * boot protocol compatible, and thus works under compatible BIOS as if
- * it was a native keyboard (e.g. PS/2).
- *
- * On startup the system will automatically enumerate and function
- * as a keyboard when the USB connection to a host is present. To use
- * the keyboard example, manipulate the joystick to send the letters
- * a, b, c, d and e. See the USB HID documentation for more information
- * on sending keyboard event and keypresses.
- *
- * <table>
- * <tr>
- * <td><b>USB Mode:</b></td>
- * <td>Device</td>
- * </tr>
- * <tr>
- * <td><b>USB Class:</b></td>
- * <td>Human Interface Device (HID)</td>
- * </tr>
- * <tr>
- * <td><b>USB Subclass:</b></td>
- * <td>N/A</td>
- * </tr>
- * <tr>
- * <td><b>Relevant Standards:</b></td>
- * <td>USBIF HID Specification, USBIF HID Usage Tables</td>
- * </tr>
- * <tr>
- * <td><b>Usable Speeds:</b></td>
- * <td>Low Speed Mode, Full Speed Mode</td>
- * </tr>
- * </table>
- */
\ No newline at end of file diff --git a/Demos/KeyboardViaInt/makefile b/Demos/KeyboardViaInt/makefile deleted file mode 100644 index c7e298c88..000000000 --- a/Demos/KeyboardViaInt/makefile +++ /dev/null @@ -1,724 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = at90usb1287
-
-
-# Target board (see library BoardTypes.h documentation, USER or blank for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = USBKEY
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-# Typical values are:
-# F_CPU = 1000000
-# F_CPU = 1843200
-# F_CPU = 2000000
-# F_CPU = 3686400
-# F_CPU = 4000000
-# F_CPU = 7372800
-# F_CPU = 8000000
-# F_CPU = 11059200
-# F_CPU = 14745600
-# F_CPU = 16000000
-# F_CPU = 18432000
-# F_CPU = 20000000
-F_CPU = 8000000
-
-
-# Input clock frequency.
-# This will define a symbol, F_CLOCK, in all source code files equal to the
-# input clock frequency (before any prescaling is performed). This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_CLOCK = 8000000
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = KeyboardViaInt
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = $(TARGET).c \
- Descriptors.c \
- ../../LUFA/Scheduler/Scheduler.c \
- ../../LUFA/Drivers/USB/LowLevel/LowLevel.c \
- ../../LUFA/Drivers/USB/LowLevel/Endpoint.c \
- ../../LUFA/Drivers/USB/LowLevel/DevChapter9.c \
- ../../LUFA/Drivers/USB/HighLevel/USBTask.c \
- ../../LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
- ../../LUFA/Drivers/USB/HighLevel/Events.c \
- ../../LUFA/Drivers/USB/HighLevel/StdDescriptors.c \
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC =
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
-
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-# AVR Studio 4.10 requires dwarf-2.
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = ../../
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD)
-CDEFS += -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DNO_STREAM_CALLBACKS -DUSB_DEVICE_ONLY
-CDEFS += -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-#CPPDEFS += -D__STDC_LIMIT_MACROS
-#CPPDEFS += -D__STDC_CONSTANT_MACROS
-
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -finline-limit=20
-CFLAGS += -Wall
-CFLAGS += -Wstrict-prototypes
-CFLAGS += -Wundef
-#CFLAGS += -fno-unit-at-a-time
-#CFLAGS += -Wunreachable-code
-#CFLAGS += -Wsign-compare
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -Wall
-CFLAGS += -Wundef
-#CPPFLAGS += -mshort-calls
-#CPPFLAGS += -fno-unit-at-a-time
-#CPPFLAGS += -Wstrict-prototypes
-#CPPFLAGS += -Wunreachable-code
-#CPPFLAGS += -Wsign-compare
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-
-
-# List any extra directories to look for libraries here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
-LDFLAGS += $(EXTMEMOPTS)
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-
-# Programming hardware: alf avr910 avrisp bascom bsd
-# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
-#
-# Type: avrdude -c ?
-# to get a full listing.
-#
-AVRDUDE_PROGRAMMER = jtagmkII
-
-# com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = usb
-
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
-# avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-checkhooks: build
- @echo
- @echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
- echo "(None)"
- @echo ------------------------------------
-
-checklibmode:
- @echo
- @echo ----------- Library Mode -----------
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
- || echo "No specific mode (both device and host mode allowable)."
- @echo ------------------------------------
-
-checkboard:
- @echo
- @echo ---------- Selected Board ----------
- @echo Selected board model is $(BOARD).
- @echo ------------------------------------
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
-
-# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
-# a breakpoint at main().
-gdb-config:
- @$(REMOVE) $(GDBINIT_FILE)
- @echo define reset >> $(GDBINIT_FILE)
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
- @echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
- @echo load >> $(GDBINIT_FILE)
-endif
- @echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
- @$(WINSHELL) /c pause
-
-else
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
- @echo
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- @echo
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
-
-%.eep: %.elf
- @echo
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -z -S $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list clean_binary end
-
-clean_binary:
- $(REMOVE) $(TARGET).hex
-
-clean_list:
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET)eep.hex
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-
-doxygen:
- @echo Generating Project Documentation...
- @doxygen Doxygen.conf
- @echo Documentation Generation Complete.
-
-clean_doxygen:
- rm -rf Documentation
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all checkhooks checklibmode checkboard \
-begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff clean \
-clean_list clean_binary program debug gdb-config \
-doxygen dfu flip flip-ee dfu-ee
\ No newline at end of file diff --git a/Demos/makefile b/Demos/makefile index b53d81cdb..2fd957a36 100644 --- a/Demos/makefile +++ b/Demos/makefile @@ -38,12 +38,6 @@ all: make -C Keyboard clean make -C Keyboard all - make -C KeyboardFullInt clean - make -C KeyboardFullInt all - - make -C KeyboardViaInt clean - make -C KeyboardViaInt all - make -C KeyboardHost clean make -C KeyboardHost all @@ -101,8 +95,6 @@ all: make -C Joystick $@ make -C KeyboardMouse $@ make -C Keyboard $@ - make -C KeyboardFullInt $@ - make -C KeyboardViaInt $@ make -C KeyboardHost $@ make -C KeyboardHostWithParser $@ make -C KeyboardHostViaInt $@ diff --git a/LUFA.pnproj b/LUFA.pnproj index 6af35f58a..3e21d735c 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ -<Project name="LUFA"><Folder name="Demos"><Folder name="TestApp"><File path="Demos\TestApp\makefile"></File><File path="Demos\TestApp\TestApp.c"></File><File path="Demos\TestApp\TestApp.h"></File><File path="Demos\TestApp\TestEvents.c"></File><File path="Demos\TestApp\TestEvents.h"></File><File path="Demos\TestApp\Descriptors.c"></File><File path="Demos\TestApp\Descriptors.h"></File><File path="Demos\TestApp\TestApp.txt"></File><File path="Demos\TestApp\Doxygen.conf"></File></Folder><Folder name="Mouse"><File path="Demos\Mouse\makefile"></File><File path="Demos\Mouse\Descriptors.c"></File><File path="Demos\Mouse\Descriptors.h"></File><File path="Demos\Mouse\Mouse.h"></File><File path="Demos\Mouse\Mouse.c"></File><File path="Demos\Mouse\Mouse.txt"></File><File path="Demos\Mouse\Doxygen.conf"></File></Folder><Folder name="Keyboard"><File path="Demos\Keyboard\Descriptors.c"></File><File path="Demos\Keyboard\Keyboard.c"></File><File path="Demos\Keyboard\Descriptors.h"></File><File path="Demos\Keyboard\Keyboard.h"></File><File path="Demos\Keyboard\makefile"></File><File path="Demos\Keyboard\Keyboard.txt"></File><File path="Demos\Keyboard\Doxygen.conf"></File></Folder><Folder name="MouseHost"><File path="Demos\MouseHost\MouseHost.h"></File><File path="Demos\MouseHost\makefile"></File><File path="Demos\MouseHost\MouseHost.c"></File><File path="Demos\MouseHost\ConfigDescriptor.c"></File><File path="Demos\MouseHost\ConfigDescriptor.h"></File><File path="Demos\MouseHost\Doxygen.conf"></File><File path="Demos\MouseHost\MouseHost.txt"></File></Folder><Folder name="KeyboardHost"><File path="Demos\KeyboardHost\makefile"></File><File path="Demos\KeyboardHost\KeyboardHost.c"></File><File path="Demos\KeyboardHost\KeyboardHost.h"></File><File path="Demos\KeyboardHost\ConfigDescriptor.c"></File><File path="Demos\KeyboardHost\ConfigDescriptor.h"></File><File path="Demos\KeyboardHost\Doxygen.conf"></File><File path="Demos\KeyboardHost\KeyboardHost.txt"></File></Folder><Folder name="Joystick"><File path="Demos\Joystick\makefile"></File><File path="Demos\Joystick\Descriptors.c"></File><File path="Demos\Joystick\Descriptors.h"></File><File path="Demos\Joystick\Joystick.c"></File><File path="Demos\Joystick\Joystick.h"></File><File path="Demos\Joystick\Joystick.txt"></File><File path="Demos\Joystick\Doxygen.conf"></File></Folder><Folder name="CDC"><File path="Demos\CDC\makefile"></File><File path="Demos\CDC\CDC.c"></File><File path="Demos\CDC\CDC.h"></File><File path="Demos\CDC\Descriptors.c"></File><File path="Demos\CDC\Descriptors.h"></File><File path="Demos\CDC\CDC.txt"></File><File path="Demos\CDC\LUFA CDC.inf"></File><File path="Demos\CDC\Doxygen.conf"></File></Folder><Folder name="USBtoSerial"><File path="Demos\USBtoSerial\Descriptors.h"></File><File path="Demos\USBtoSerial\RingBuff.c"></File><File path="Demos\USBtoSerial\RingBuff.h"></File><File path="Demos\USBtoSerial\Descriptors.c"></File><File path="Demos\USBtoSerial\makefile"></File><File path="Demos\USBtoSerial\USBtoSerial.h"></File><File path="Demos\USBtoSerial\USBtoSerial.c"></File><File path="Demos\USBtoSerial\USBtoSerial.txt"></File><File path="Demos\USBtoSerial\LUFA USBtoSerial.inf"></File><File path="Demos\USBtoSerial\Doxygen.conf"></File></Folder><Folder name="MassStorage"><File path="Demos\MassStorage\MassStorage.h"></File><File path="Demos\MassStorage\Descriptors.c"></File><File path="Demos\MassStorage\Descriptors.h"></File><File path="Demos\MassStorage\makefile"></File><File path="Demos\MassStorage\MassStorage.c"></File><File path="Demos\MassStorage\SCSI.h"></File><File path="Demos\MassStorage\SCSI.c"></File><File path="Demos\MassStorage\DataflashManager.h"></File><File path="Demos\MassStorage\SCSI_Codes.h"></File><File path="Demos\MassStorage\MassStorage.txt"></File><File path="Demos\MassStorage\DataflashManager.c"></File><File path="Demos\MassStorage\Doxygen.conf"></File></Folder><Folder name="KeyboardHostViaInt"><File path="Demos\KeyboardHostViaInt\makefile"></File><File path="Demos\KeyboardHostViaInt\KeyboardHostViaInt.c"></File><File path="Demos\KeyboardHostViaInt\KeyboardHostViaInt.h"></File><File path="Demos\KeyboardHostViaInt\ConfigDescriptor.c"></File><File path="Demos\KeyboardHostViaInt\ConfigDescriptor.h"></File><File path="Demos\KeyboardHostViaInt\Doxygen.conf"></File><File path="Demos\KeyboardHostViaInt\KeyboardHostViaInt.txt"></File></Folder><Folder name="MouseHostViaInt"><File path="Demos\MouseHostViaInt\MouseHostViaInt.h"></File><File path="Demos\MouseHostViaInt\makefile"></File><File path="Demos\MouseHostViaInt\MouseHostViaInt.c"></File><File path="Demos\MouseHostViaInt\ConfigDescriptor.c"></File><File path="Demos\MouseHostViaInt\ConfigDescriptor.h"></File><File path="Demos\MouseHostViaInt\Doxygen.conf"></File><File path="Demos\MouseHostViaInt\MouseHostViaInt.txt"></File></Folder><Folder name="AudioOutput"><File path="Demos\AudioOutput\makefile"></File><File path="Demos\AudioOutput\AudioOutput.c"></File><File path="Demos\AudioOutput\AudioOutput.h"></File><File path="Demos\AudioOutput\Descriptors.c"></File><File path="Demos\AudioOutput\Descriptors.h"></File><File path="Demos\AudioOutput\Doxygen.conf"></File><File path="Demos\AudioOutput\AudioOutput.txt"></File></Folder><Folder name="MassStorageHost"><File path="Demos\MassStorageHost\MassStorageHost.h"></File><File path="Demos\MassStorageHost\makefile"></File><File path="Demos\MassStorageHost\MassStorageHost.c"></File><File path="Demos\MassStorageHost\MassStoreCommands.c"></File><File path="Demos\MassStorageHost\MassStoreCommands.h"></File><File path="Demos\MassStorageHost\ConfigDescriptor.c"></File><File path="Demos\MassStorageHost\ConfigDescriptor.h"></File><File path="Demos\MassStorageHost\Doxygen.conf"></File><File path="Demos\MassStorageHost\SCSI_Codes.h"></File><File path="Demos\MassStorageHost\MassStorageHost.txt"></File></Folder><Folder name="AudioInput"><File path="Demos\AudioInput\makefile"></File><File path="Demos\AudioInput\AudioInput.h"></File><File path="Demos\AudioInput\Descriptors.h"></File><File path="Demos\AudioInput\Descriptors.c"></File><File path="Demos\AudioInput\AudioInput.c"></File><File path="Demos\AudioInput\Doxygen.conf"></File><File path="Demos\AudioInput\AudioInput.txt"></File></Folder><Folder name="KeyboardViaInt"><File path="Demos\KeyboardViaInt\Descriptors.c"></File><File path="Demos\KeyboardViaInt\Descriptors.h"></File><File path="Demos\KeyboardViaInt\KeyboardViaInt.c"></File><File path="Demos\KeyboardViaInt\KeyboardViaInt.h"></File><File path="Demos\KeyboardViaInt\makefile"></File><File path="Demos\KeyboardViaInt\KeyboardViaInt.txt"></File><File path="Demos\KeyboardViaInt\Doxygen.conf"></File></Folder><Folder name="MouseViaInt"><File path="Demos\MouseViaInt\Descriptors.c"></File><File path="Demos\MouseViaInt\Descriptors.h"></File><File path="Demos\MouseViaInt\makefile"></File><File path="Demos\MouseViaInt\MouseViaInt.c"></File><File path="Demos\MouseViaInt\MouseViaInt.h"></File><File path="Demos\MouseViaInt\MouseViaInt.txt"></File><File path="Demos\MouseViaInt\Doxygen.conf"></File></Folder><Folder name="MouseFullInt"><File path="Demos\MouseFullInt\Descriptors.c"></File><File path="Demos\MouseFullInt\Descriptors.h"></File><File path="Demos\MouseFullInt\makefile"></File><File path="Demos\MouseFullInt\MouseFullInt.c"></File><File path="Demos\MouseFullInt\MouseFullInt.h"></File><File path="Demos\MouseFullInt\MouseFullInt.txt"></File><File path="Demos\MouseFullInt\Doxygen.conf"></File></Folder><Folder name="KeyboardHostWithParser"><File path="Demos\KeyboardHostWithParser\makefile"></File><File path="Demos\KeyboardHostWithParser\KeyboardHostWithParser.c"></File><File path="Demos\KeyboardHostWithParser\KeyboardHostWithParser.h"></File><File path="Demos\KeyboardHostWithParser\ConfigDescriptor.c"></File><File path="Demos\KeyboardHostWithParser\ConfigDescriptor.h"></File><File path="Demos\KeyboardHostWithParser\HIDReport.c"></File><File path="Demos\KeyboardHostWithParser\HIDReport.h"></File><File path="Demos\KeyboardHostWithParser\Doxygen.conf"></File><File path="Demos\KeyboardHostWithParser\KeyboardHostWithParser.txt"></File></Folder><Folder name="MouseHostWithParser"><File path="Demos\MouseHostWithParser\makefile"></File><File path="Demos\MouseHostWithParser\MouseHostWithParser.c"></File><File path="Demos\MouseHostWithParser\MouseHostWithParser.h"></File><File path="Demos\MouseHostWithParser\ConfigDescriptor.c"></File><File path="Demos\MouseHostWithParser\ConfigDescriptor.h"></File><File path="Demos\MouseHostWithParser\HIDReport.c"></File><File path="Demos\MouseHostWithParser\HIDReport.h"></File><File path="Demos\MouseHostWithParser\Doxygen.conf"></File><File path="Demos\MouseHostWithParser\MouseHostWithParser.txt"></File></Folder><Folder name="MIDI"><File path="Demos\MIDI\Descriptors.c"></File><File path="Demos\MIDI\Descriptors.h"></File><File path="Demos\MIDI\makefile"></File><File path="Demos\MIDI\MIDI.c"></File><File path="Demos\MIDI\MIDI.h"></File><File path="Demos\MIDI\Doxygen.conf"></File><File path="Demos\MIDI\MIDI.txt"></File></Folder><Folder name="CDCHost"><File path="Demos\CDCHost\CDCHost.c"></File><File path="Demos\CDCHost\CDCHost.h"></File><File path="Demos\CDCHost\makefile"></File><File path="Demos\CDCHost\ConfigDescriptor.c"></File><File path="Demos\CDCHost\ConfigDescriptor.h"></File><File path="Demos\CDCHost\Doxygen.conf"></File><File path="Demos\CDCHost\CDCHost.txt"></File></Folder><Folder name="StillImageHost"><File path="Demos\StillImageHost\makefile"></File><File path="Demos\StillImageHost\PIMACodes.h"></File><File path="Demos\StillImageHost\StillImageCommands.c"></File><File path="Demos\StillImageHost\StillImageCommands.h"></File><File path="Demos\StillImageHost\StillImageHost.c"></File><File path="Demos\StillImageHost\StillImageHost.h"></File><File path="Demos\StillImageHost\ConfigDescriptor.c"></File><File path="Demos\StillImageHost\ConfigDescriptor.h"></File><File path="Demos\StillImageHost\Doxygen.conf"></File></Folder><Folder name="KeyboardFullInt"><File path="Demos\KeyboardFullInt\Descriptors.c"></File><File path="Demos\KeyboardFullInt\Descriptors.h"></File><File path="Demos\KeyboardFullInt\KeyboardFullInt.c"></File><File path="Demos\KeyboardFullInt\KeyboardFullInt.h"></File><File path="Demos\KeyboardFullInt\makefile"></File><File path="Demos\KeyboardFullInt\KeyboardFullInt.txt"></File><File path="Demos\KeyboardFullInt\Doxygen.conf"></File></Folder><Folder name="RNDISEthernet"><File path="Demos\RNDISEthernet\RNDIS.c"></File><File path="Demos\RNDISEthernet\Descriptors.c"></File><File path="Demos\RNDISEthernet\Webserver.h"></File><File path="Demos\RNDISEthernet\ARP.c"></File><File path="Demos\RNDISEthernet\ARP.h"></File><File path="Demos\RNDISEthernet\Descriptors.h"></File><File path="Demos\RNDISEthernet\DHCP.c"></File><File path="Demos\RNDISEthernet\DHCP.h"></File><File path="Demos\RNDISEthernet\Ethernet.c"></File><File path="Demos\RNDISEthernet\Ethernet.h"></File><File path="Demos\RNDISEthernet\EthernetProtocols.h"></File><File path="Demos\RNDISEthernet\ICMP.c"></File><File path="Demos\RNDISEthernet\ICMP.h"></File><File path="Demos\RNDISEthernet\IP.c"></File><File path="Demos\RNDISEthernet\IP.h"></File><File path="Demos\RNDISEthernet\makefile"></File><File path="Demos\RNDISEthernet\ProtocolDecoders.c"></File><File path="Demos\RNDISEthernet\ProtocolDecoders.h"></File><File path="Demos\RNDISEthernet\RNDIS.h"></File><File path="Demos\RNDISEthernet\RNDISEthernet.aps"></File><File path="Demos\RNDISEthernet\RNDISEthernet.c"></File><File path="Demos\RNDISEthernet\RNDISEthernet.h"></File><File path="Demos\RNDISEthernet\TCP.c"></File><File path="Demos\RNDISEthernet\TCP.h"></File><File path="Demos\RNDISEthernet\UDP.c"></File><File path="Demos\RNDISEthernet\UDP.h"></File><File path="Demos\RNDISEthernet\Webserver.c"></File><File path="Demos\RNDISEthernet\LUFA RNDIS.inf"></File><File path="Demos\RNDISEthernet\Doxygen.conf"></File><File path="Demos\RNDISEthernet\RNDISEthernet.txt"></File><File path="Demos\RNDISEthernet\RNDISConstants.h"></File></Folder><Folder name="KeyboardMouse"><File path="Demos\KeyboardMouse\Descriptors.c"></File><File path="Demos\KeyboardMouse\Descriptors.h"></File><File path="Demos\KeyboardMouse\KeyboardMouse.c"></File><File path="Demos\KeyboardMouse\KeyboardMouse.h"></File><File path="Demos\KeyboardMouse\makefile"></File><File path="Demos\KeyboardMouse\KeyboardMouse.txt"></File><File path="Demos\KeyboardMouse\Doxygen.conf"></File></Folder><Folder name="DualCDC"><File path="Demos\DualCDC\Descriptors.c"></File><File path="Demos\DualCDC\Descriptors.h"></File><File path="Demos\DualCDC\makefile"></File><File path="Demos\DualCDC\DualCDC.c"></File><File path="Demos\DualCDC\DualCDC.h"></File><File path="Demos\DualCDC\DualCDC.txt"></File><File path="Demos\DualCDC\LUFA DualCDC.inf"></File><File path="Demos\DualCDC\Doxygen.conf"></File></Folder><File path="Demos\makefile"></File></Folder><Folder name="LUFA"><Folder name="Common"><File path="LUFA\Common\Common.h"></File><File path="LUFA\Common\FunctionAttributes.h"></File><File path="LUFA\Common\ButtLoadTag.h"></File><File path="LUFA\Common\BoardTypes.h"></File></Folder><Folder name="Drivers"><Folder name="USB"><Folder name="LowLevel"><File path="LUFA\Drivers\USB\LowLevel\HostChapter9.h"></File><File path="LUFA\Drivers\USB\LowLevel\LowLevel.c"></File><File path="LUFA\Drivers\USB\LowLevel\LowLevel.h"></File><File path="LUFA\Drivers\USB\LowLevel\Pipe.c"></File><File path="LUFA\Drivers\USB\LowLevel\Pipe.h"></File><File path="LUFA\Drivers\USB\LowLevel\StdRequestType.h"></File><File path="LUFA\Drivers\USB\LowLevel\DevChapter9.c"></File><File path="LUFA\Drivers\USB\LowLevel\DevChapter9.h"></File><File path="LUFA\Drivers\USB\LowLevel\Device.h"></File><File path="LUFA\Drivers\USB\LowLevel\Endpoint.c"></File><File path="LUFA\Drivers\USB\LowLevel\Endpoint.h"></File><File path="LUFA\Drivers\USB\LowLevel\Host.c"></File><File path="LUFA\Drivers\USB\LowLevel\Host.h"></File><File path="LUFA\Drivers\USB\LowLevel\HostChapter9.c"></File><File path="LUFA\Drivers\USB\LowLevel\OTG.h"></File><File path="LUFA\Drivers\USB\LowLevel\USBMode.h"></File><File path="LUFA\Drivers\USB\LowLevel\StreamCallbacks.h"></File></Folder><Folder name="HighLevel"><File path="LUFA\Drivers\USB\HighLevel\USBTask.h"></File><File path="LUFA\Drivers\USB\HighLevel\Events.c"></File><File path="LUFA\Drivers\USB\HighLevel\Events.h"></File><File path="LUFA\Drivers\USB\HighLevel\USBInterrupt.c"></File><File path="LUFA\Drivers\USB\HighLevel\USBInterrupt.h"></File><File path="LUFA\Drivers\USB\HighLevel\USBTask.c"></File><File path="LUFA\Drivers\USB\HighLevel\StdDescriptors.c"></File><File path="LUFA\Drivers\USB\HighLevel\StdDescriptors.h"></File></Folder><Folder name="Class"><File path="LUFA\Drivers\USB\Class\HIDParser.c"></File><File path="LUFA\Drivers\USB\Class\HIDParser.h"></File><File path="LUFA\Drivers\USB\Class\HIDReportData.h"></File><File path="LUFA\Drivers\USB\Class\ConfigDescriptor.c"></File><File path="LUFA\Drivers\USB\Class\ConfigDescriptor.h"></File></Folder><File path="LUFA\Drivers\USB\USB.h"></File></Folder><Folder name="Misc"><File path="LUFA\Drivers\Misc\TerminalCodes.h"></File></Folder><Folder name="AT90USBXXX"><Folder name="AT90USBXXX67"><File path="LUFA\Drivers\AT90USBXXX\AT90USBXXX67\ADC.h"></File></Folder><File path="LUFA\Drivers\AT90USBXXX\Serial_Stream.h"></File><File path="LUFA\Drivers\AT90USBXXX\ADC.h"></File><File path="LUFA\Drivers\AT90USBXXX\Serial.c"></File><File path="LUFA\Drivers\AT90USBXXX\Serial.h"></File><File path="LUFA\Drivers\AT90USBXXX\Serial_Stream.c"></File><File path="LUFA\Drivers\AT90USBXXX\SPI.h"></File></Folder><Folder name="Board"><Folder name="USBKEY"><File path="LUFA\Drivers\Board\USBKEY\Dataflash.h"></File><File path="LUFA\Drivers\Board\USBKEY\Joystick.h"></File><File path="LUFA\Drivers\Board\USBKEY\HWB.h"></File><File path="LUFA\Drivers\Board\USBKEY\AT45DB642D.h"></File><File path="LUFA\Drivers\Board\USBKEY\LEDs.h"></File></Folder><Folder name="STK526"><File path="LUFA\Drivers\Board\STK526\Dataflash.h"></File><File path="LUFA\Drivers\Board\STK526\Joystick.h"></File><File path="LUFA\Drivers\Board\STK526\HWB.h"></File><File path="LUFA\Drivers\Board\STK526\AT45DB642D.h"></File><File path="LUFA\Drivers\Board\STK526\LEDs.h"></File></Folder><Folder name="STK525"><File path="LUFA\Drivers\Board\STK525\Dataflash.h"></File><File path="LUFA\Drivers\Board\STK525\Joystick.h"></File><File path="LUFA\Drivers\Board\STK525\HWB.h"></File><File path="LUFA\Drivers\Board\STK525\AT45DB321C.h"></File><File path="LUFA\Drivers\Board\STK525\LEDs.h"></File></Folder><Folder name="RZUSBSTICK"><File path="LUFA\Drivers\Board\RZUSBSTICK\LEDs.h"></File></Folder><Folder name="ATAVRUSBRF01"><File path="LUFA\Drivers\Board\ATAVRUSBRF01\LEDs.h"></File><File path="LUFA\Drivers\Board\ATAVRUSBRF01\HWB.h"></File></Folder><File path="LUFA\Drivers\Board\Temperature.h"></File><File path="LUFA\Drivers\Board\Dataflash.h"></File><File path="LUFA\Drivers\Board\HWB.h"></File><File path="LUFA\Drivers\Board\Joystick.h"></File><File path="LUFA\Drivers\Board\Temperature.c"></File><File path="LUFA\Drivers\Board\LEDs.h"></File></Folder></Folder><Folder name="Scheduler"><File path="LUFA\Scheduler\Scheduler.h"></File><File path="LUFA\Scheduler\Scheduler.c"></File></Folder><Folder name="MemoryAllocator"><File path="LUFA\MemoryAllocator\DynAlloc.h"></File><File path="LUFA\MemoryAllocator\DynAlloc.c"></File></Folder><Folder name="DriverStubs"><File path="LUFA\DriverStubs\Dataflash.h"></File><File path="LUFA\DriverStubs\HWB.h"></File><File path="LUFA\DriverStubs\Joystick.h"></File><File path="LUFA\DriverStubs\LEDs.h"></File></Folder><File path="LUFA\makefile"></File><File path="LUFA\Version.h"></File><File path="LUFA\BuildingLinkableLibraries.txt"></File><File path="LUFA\GettingStarted.txt"></File><File path="LUFA\MainPage.txt"></File><File path="LUFA\SchedulerOverview.txt"></File><File path="LUFA\VIDAndPIDValues.txt"></File><File path="LUFA\ChangeLog.txt"></File><File path="LUFA\CompileTimeTokens.txt"></File><File path="LUFA\MigrationInformation.txt"></File><File path="LUFA\DirectorySummaries.txt"></File><File path="LUFA\Doxygen.conf"></File><File path="LUFA\WritingBoardDrivers.txt"></File></Folder><Folder name="Projects"><Folder name="MagStripe"><File path="Projects\Magstripe\Descriptors.c"></File><File path="Projects\Magstripe\Descriptors.h"></File><File path="Projects\Magstripe\Magstripe.c"></File><File path="Projects\Magstripe\Magstripe.h"></File><File path="Projects\Magstripe\MagstripeHW.h"></File><File path="Projects\Magstripe\makefile"></File><File path="Projects\Magstripe\Magstripe.txt"></File><File path="Projects\Magstripe\Doxygen.conf"></File><File path="Projects\Magstripe\CircularBitBuffer.c"></File><File path="Projects\Magstripe\CircularBitBuffer.h"></File></Folder><Folder name="AVRISP_Programmer"><File path="Projects\AVRISP_Programmer\AVRISP_Firmware_Design.txt"></File><File path="Projects\AVRISP_Programmer\AVRISP_Programmer.c"></File><File path="Projects\AVRISP_Programmer\AVRISP_Programmer.h"></File><File path="Projects\AVRISP_Programmer\AVRISP_Programmer.txt"></File><File path="Projects\AVRISP_Programmer\Descriptors.c"></File><File path="Projects\AVRISP_Programmer\makefile"></File><File path="Projects\AVRISP_Programmer\Sample_Programming_Session.txt"></File><File path="Projects\AVRISP_Programmer\RingBuff.c"></File><File path="Projects\AVRISP_Programmer\RingBuff.h"></File><File path="Projects\AVRISP_Programmer\Descriptors.h"></File></Folder><File path="Projects\makefile"></File></Folder><Folder name="Bootloaders"><Folder name="DFU"><File path="Bootloaders\DFU\BootloaderDFU.c"></File><File path="Bootloaders\DFU\BootloaderDFU.h"></File><File path="Bootloaders\DFU\Descriptors.c"></File><File path="Bootloaders\DFU\Descriptors.h"></File><File path="Bootloaders\DFU\makefile"></File><File path="Bootloaders\DFU\BootloaderDFU.txt"></File><File path="Bootloaders\DFU\Doxygen.conf"></File></Folder><Folder name="CDC"><File path="Bootloaders\CDC\BootloaderCDC.c"></File><File path="Bootloaders\CDC\BootloaderCDC.h"></File><File path="Bootloaders\CDC\Descriptors.c"></File><File path="Bootloaders\CDC\Descriptors.h"></File><File path="Bootloaders\CDC\makefile"></File><File path="Bootloaders\CDC\LUFA CDC Bootloader.inf"></File><File path="Bootloaders\CDC\Doxygen.conf"></File><File path="Bootloaders\CDC\BootloaderCDC.txt"></File></Folder><Folder name="TeensyHID"><File path="Bootloaders\TeensyHID\Descriptors.c"></File><File path="Bootloaders\TeensyHID\Descriptors.h"></File><File path="Bootloaders\TeensyHID\makefile"></File><File path="Bootloaders\TeensyHID\TeensyHID.c"></File><File path="Bootloaders\TeensyHID\TeensyHID.h"></File><File path="Bootloaders\TeensyHID\TeensyHID.txt"></File></Folder><File path="Bootloaders\makefile"></File></Folder><File path="makefile"></File></Project>
\ No newline at end of file +<Project name="LUFA"><Folder name="Demos"><Folder name="TestApp"><File path="Demos\TestApp\makefile"></File><File path="Demos\TestApp\TestApp.c"></File><File path="Demos\TestApp\TestApp.h"></File><File path="Demos\TestApp\TestEvents.c"></File><File path="Demos\TestApp\TestEvents.h"></File><File path="Demos\TestApp\Descriptors.c"></File><File path="Demos\TestApp\Descriptors.h"></File><File path="Demos\TestApp\TestApp.txt"></File><File path="Demos\TestApp\Doxygen.conf"></File></Folder><Folder name="Mouse"><File path="Demos\Mouse\makefile"></File><File path="Demos\Mouse\Descriptors.c"></File><File path="Demos\Mouse\Descriptors.h"></File><File path="Demos\Mouse\Mouse.h"></File><File path="Demos\Mouse\Mouse.c"></File><File path="Demos\Mouse\Mouse.txt"></File><File path="Demos\Mouse\Doxygen.conf"></File></Folder><Folder name="Keyboard"><File path="Demos\Keyboard\Descriptors.c"></File><File path="Demos\Keyboard\Keyboard.c"></File><File path="Demos\Keyboard\Descriptors.h"></File><File path="Demos\Keyboard\Keyboard.h"></File><File path="Demos\Keyboard\makefile"></File><File path="Demos\Keyboard\Keyboard.txt"></File><File path="Demos\Keyboard\Doxygen.conf"></File></Folder><Folder name="MouseHost"><File path="Demos\MouseHost\MouseHost.h"></File><File path="Demos\MouseHost\makefile"></File><File path="Demos\MouseHost\MouseHost.c"></File><File path="Demos\MouseHost\ConfigDescriptor.c"></File><File path="Demos\MouseHost\ConfigDescriptor.h"></File><File path="Demos\MouseHost\Doxygen.conf"></File><File path="Demos\MouseHost\MouseHost.txt"></File></Folder><Folder name="KeyboardHost"><File path="Demos\KeyboardHost\makefile"></File><File path="Demos\KeyboardHost\KeyboardHost.c"></File><File path="Demos\KeyboardHost\KeyboardHost.h"></File><File path="Demos\KeyboardHost\ConfigDescriptor.c"></File><File path="Demos\KeyboardHost\ConfigDescriptor.h"></File><File path="Demos\KeyboardHost\Doxygen.conf"></File><File path="Demos\KeyboardHost\KeyboardHost.txt"></File></Folder><Folder name="Joystick"><File path="Demos\Joystick\makefile"></File><File path="Demos\Joystick\Descriptors.c"></File><File path="Demos\Joystick\Descriptors.h"></File><File path="Demos\Joystick\Joystick.c"></File><File path="Demos\Joystick\Joystick.h"></File><File path="Demos\Joystick\Joystick.txt"></File><File path="Demos\Joystick\Doxygen.conf"></File></Folder><Folder name="CDC"><File path="Demos\CDC\makefile"></File><File path="Demos\CDC\CDC.c"></File><File path="Demos\CDC\CDC.h"></File><File path="Demos\CDC\Descriptors.c"></File><File path="Demos\CDC\Descriptors.h"></File><File path="Demos\CDC\CDC.txt"></File><File path="Demos\CDC\LUFA CDC.inf"></File><File path="Demos\CDC\Doxygen.conf"></File></Folder><Folder name="USBtoSerial"><File path="Demos\USBtoSerial\Descriptors.h"></File><File path="Demos\USBtoSerial\RingBuff.c"></File><File path="Demos\USBtoSerial\RingBuff.h"></File><File path="Demos\USBtoSerial\Descriptors.c"></File><File path="Demos\USBtoSerial\makefile"></File><File path="Demos\USBtoSerial\USBtoSerial.h"></File><File path="Demos\USBtoSerial\USBtoSerial.c"></File><File path="Demos\USBtoSerial\USBtoSerial.txt"></File><File path="Demos\USBtoSerial\LUFA USBtoSerial.inf"></File><File path="Demos\USBtoSerial\Doxygen.conf"></File></Folder><Folder name="MassStorage"><File path="Demos\MassStorage\MassStorage.h"></File><File path="Demos\MassStorage\Descriptors.c"></File><File path="Demos\MassStorage\Descriptors.h"></File><File path="Demos\MassStorage\makefile"></File><File path="Demos\MassStorage\MassStorage.c"></File><File path="Demos\MassStorage\SCSI.h"></File><File path="Demos\MassStorage\SCSI.c"></File><File path="Demos\MassStorage\DataflashManager.h"></File><File path="Demos\MassStorage\SCSI_Codes.h"></File><File path="Demos\MassStorage\MassStorage.txt"></File><File path="Demos\MassStorage\DataflashManager.c"></File><File path="Demos\MassStorage\Doxygen.conf"></File></Folder><Folder name="KeyboardHostViaInt"><File path="Demos\KeyboardHostViaInt\makefile"></File><File path="Demos\KeyboardHostViaInt\KeyboardHostViaInt.c"></File><File path="Demos\KeyboardHostViaInt\KeyboardHostViaInt.h"></File><File path="Demos\KeyboardHostViaInt\ConfigDescriptor.c"></File><File path="Demos\KeyboardHostViaInt\ConfigDescriptor.h"></File><File path="Demos\KeyboardHostViaInt\Doxygen.conf"></File><File path="Demos\KeyboardHostViaInt\KeyboardHostViaInt.txt"></File></Folder><Folder name="MouseHostViaInt"><File path="Demos\MouseHostViaInt\MouseHostViaInt.h"></File><File path="Demos\MouseHostViaInt\makefile"></File><File path="Demos\MouseHostViaInt\MouseHostViaInt.c"></File><File path="Demos\MouseHostViaInt\ConfigDescriptor.c"></File><File path="Demos\MouseHostViaInt\ConfigDescriptor.h"></File><File path="Demos\MouseHostViaInt\Doxygen.conf"></File><File path="Demos\MouseHostViaInt\MouseHostViaInt.txt"></File></Folder><Folder name="AudioOutput"><File path="Demos\AudioOutput\makefile"></File><File path="Demos\AudioOutput\AudioOutput.c"></File><File path="Demos\AudioOutput\AudioOutput.h"></File><File path="Demos\AudioOutput\Descriptors.c"></File><File path="Demos\AudioOutput\Descriptors.h"></File><File path="Demos\AudioOutput\Doxygen.conf"></File><File path="Demos\AudioOutput\AudioOutput.txt"></File></Folder><Folder name="MassStorageHost"><File path="Demos\MassStorageHost\MassStorageHost.h"></File><File path="Demos\MassStorageHost\makefile"></File><File path="Demos\MassStorageHost\MassStorageHost.c"></File><File path="Demos\MassStorageHost\MassStoreCommands.c"></File><File path="Demos\MassStorageHost\MassStoreCommands.h"></File><File path="Demos\MassStorageHost\ConfigDescriptor.c"></File><File path="Demos\MassStorageHost\ConfigDescriptor.h"></File><File path="Demos\MassStorageHost\Doxygen.conf"></File><File path="Demos\MassStorageHost\SCSI_Codes.h"></File><File path="Demos\MassStorageHost\MassStorageHost.txt"></File></Folder><Folder name="AudioInput"><File path="Demos\AudioInput\makefile"></File><File path="Demos\AudioInput\AudioInput.h"></File><File path="Demos\AudioInput\Descriptors.h"></File><File path="Demos\AudioInput\Descriptors.c"></File><File path="Demos\AudioInput\AudioInput.c"></File><File path="Demos\AudioInput\Doxygen.conf"></File><File path="Demos\AudioInput\AudioInput.txt"></File></Folder><Folder name="MouseViaInt"><File path="Demos\MouseViaInt\Descriptors.c"></File><File path="Demos\MouseViaInt\Descriptors.h"></File><File path="Demos\MouseViaInt\makefile"></File><File path="Demos\MouseViaInt\MouseViaInt.c"></File><File path="Demos\MouseViaInt\MouseViaInt.h"></File><File path="Demos\MouseViaInt\MouseViaInt.txt"></File><File path="Demos\MouseViaInt\Doxygen.conf"></File></Folder><Folder name="MouseFullInt"><File path="Demos\MouseFullInt\Descriptors.c"></File><File path="Demos\MouseFullInt\Descriptors.h"></File><File path="Demos\MouseFullInt\makefile"></File><File path="Demos\MouseFullInt\MouseFullInt.c"></File><File path="Demos\MouseFullInt\MouseFullInt.h"></File><File path="Demos\MouseFullInt\MouseFullInt.txt"></File><File path="Demos\MouseFullInt\Doxygen.conf"></File></Folder><Folder name="KeyboardHostWithParser"><File path="Demos\KeyboardHostWithParser\makefile"></File><File path="Demos\KeyboardHostWithParser\KeyboardHostWithParser.c"></File><File path="Demos\KeyboardHostWithParser\KeyboardHostWithParser.h"></File><File path="Demos\KeyboardHostWithParser\ConfigDescriptor.c"></File><File path="Demos\KeyboardHostWithParser\ConfigDescriptor.h"></File><File path="Demos\KeyboardHostWithParser\HIDReport.c"></File><File path="Demos\KeyboardHostWithParser\HIDReport.h"></File><File path="Demos\KeyboardHostWithParser\Doxygen.conf"></File><File path="Demos\KeyboardHostWithParser\KeyboardHostWithParser.txt"></File></Folder><Folder name="MouseHostWithParser"><File path="Demos\MouseHostWithParser\makefile"></File><File path="Demos\MouseHostWithParser\MouseHostWithParser.c"></File><File path="Demos\MouseHostWithParser\MouseHostWithParser.h"></File><File path="Demos\MouseHostWithParser\ConfigDescriptor.c"></File><File path="Demos\MouseHostWithParser\ConfigDescriptor.h"></File><File path="Demos\MouseHostWithParser\HIDReport.c"></File><File path="Demos\MouseHostWithParser\HIDReport.h"></File><File path="Demos\MouseHostWithParser\Doxygen.conf"></File><File path="Demos\MouseHostWithParser\MouseHostWithParser.txt"></File></Folder><Folder name="MIDI"><File path="Demos\MIDI\Descriptors.c"></File><File path="Demos\MIDI\Descriptors.h"></File><File path="Demos\MIDI\makefile"></File><File path="Demos\MIDI\MIDI.c"></File><File path="Demos\MIDI\MIDI.h"></File><File path="Demos\MIDI\Doxygen.conf"></File><File path="Demos\MIDI\MIDI.txt"></File></Folder><Folder name="CDCHost"><File path="Demos\CDCHost\CDCHost.c"></File><File path="Demos\CDCHost\CDCHost.h"></File><File path="Demos\CDCHost\makefile"></File><File path="Demos\CDCHost\ConfigDescriptor.c"></File><File path="Demos\CDCHost\ConfigDescriptor.h"></File><File path="Demos\CDCHost\Doxygen.conf"></File><File path="Demos\CDCHost\CDCHost.txt"></File></Folder><Folder name="StillImageHost"><File path="Demos\StillImageHost\makefile"></File><File path="Demos\StillImageHost\PIMACodes.h"></File><File path="Demos\StillImageHost\StillImageCommands.c"></File><File path="Demos\StillImageHost\StillImageCommands.h"></File><File path="Demos\StillImageHost\StillImageHost.c"></File><File path="Demos\StillImageHost\StillImageHost.h"></File><File path="Demos\StillImageHost\ConfigDescriptor.c"></File><File path="Demos\StillImageHost\ConfigDescriptor.h"></File><File path="Demos\StillImageHost\Doxygen.conf"></File></Folder><Folder name="RNDISEthernet"><File path="Demos\RNDISEthernet\RNDIS.c"></File><File path="Demos\RNDISEthernet\Descriptors.c"></File><File path="Demos\RNDISEthernet\Webserver.h"></File><File path="Demos\RNDISEthernet\ARP.c"></File><File path="Demos\RNDISEthernet\ARP.h"></File><File path="Demos\RNDISEthernet\Descriptors.h"></File><File path="Demos\RNDISEthernet\DHCP.c"></File><File path="Demos\RNDISEthernet\DHCP.h"></File><File path="Demos\RNDISEthernet\Ethernet.c"></File><File path="Demos\RNDISEthernet\Ethernet.h"></File><File path="Demos\RNDISEthernet\EthernetProtocols.h"></File><File path="Demos\RNDISEthernet\ICMP.c"></File><File path="Demos\RNDISEthernet\ICMP.h"></File><File path="Demos\RNDISEthernet\IP.c"></File><File path="Demos\RNDISEthernet\IP.h"></File><File path="Demos\RNDISEthernet\makefile"></File><File path="Demos\RNDISEthernet\ProtocolDecoders.c"></File><File path="Demos\RNDISEthernet\ProtocolDecoders.h"></File><File path="Demos\RNDISEthernet\RNDIS.h"></File><File path="Demos\RNDISEthernet\RNDISEthernet.aps"></File><File path="Demos\RNDISEthernet\RNDISEthernet.c"></File><File path="Demos\RNDISEthernet\RNDISEthernet.h"></File><File path="Demos\RNDISEthernet\TCP.c"></File><File path="Demos\RNDISEthernet\TCP.h"></File><File path="Demos\RNDISEthernet\UDP.c"></File><File path="Demos\RNDISEthernet\UDP.h"></File><File path="Demos\RNDISEthernet\Webserver.c"></File><File path="Demos\RNDISEthernet\LUFA RNDIS.inf"></File><File path="Demos\RNDISEthernet\Doxygen.conf"></File><File path="Demos\RNDISEthernet\RNDISEthernet.txt"></File><File path="Demos\RNDISEthernet\RNDISConstants.h"></File></Folder><Folder name="KeyboardMouse"><File path="Demos\KeyboardMouse\Descriptors.c"></File><File path="Demos\KeyboardMouse\Descriptors.h"></File><File path="Demos\KeyboardMouse\KeyboardMouse.c"></File><File path="Demos\KeyboardMouse\KeyboardMouse.h"></File><File path="Demos\KeyboardMouse\makefile"></File><File path="Demos\KeyboardMouse\KeyboardMouse.txt"></File><File path="Demos\KeyboardMouse\Doxygen.conf"></File></Folder><Folder name="DualCDC"><File path="Demos\DualCDC\Descriptors.c"></File><File path="Demos\DualCDC\Descriptors.h"></File><File path="Demos\DualCDC\makefile"></File><File path="Demos\DualCDC\DualCDC.c"></File><File path="Demos\DualCDC\DualCDC.h"></File><File path="Demos\DualCDC\DualCDC.txt"></File><File path="Demos\DualCDC\LUFA DualCDC.inf"></File><File path="Demos\DualCDC\Doxygen.conf"></File></Folder><File path="Demos\makefile"></File></Folder><Folder name="LUFA"><Folder name="Common"><File path="LUFA\Common\Common.h"></File><File path="LUFA\Common\FunctionAttributes.h"></File><File path="LUFA\Common\ButtLoadTag.h"></File><File path="LUFA\Common\BoardTypes.h"></File></Folder><Folder name="Drivers"><Folder name="USB"><Folder name="LowLevel"><File path="LUFA\Drivers\USB\LowLevel\HostChapter9.h"></File><File path="LUFA\Drivers\USB\LowLevel\LowLevel.c"></File><File path="LUFA\Drivers\USB\LowLevel\LowLevel.h"></File><File path="LUFA\Drivers\USB\LowLevel\Pipe.c"></File><File path="LUFA\Drivers\USB\LowLevel\Pipe.h"></File><File path="LUFA\Drivers\USB\LowLevel\StdRequestType.h"></File><File path="LUFA\Drivers\USB\LowLevel\DevChapter9.c"></File><File path="LUFA\Drivers\USB\LowLevel\DevChapter9.h"></File><File path="LUFA\Drivers\USB\LowLevel\Device.h"></File><File path="LUFA\Drivers\USB\LowLevel\Endpoint.c"></File><File path="LUFA\Drivers\USB\LowLevel\Endpoint.h"></File><File path="LUFA\Drivers\USB\LowLevel\Host.c"></File><File path="LUFA\Drivers\USB\LowLevel\Host.h"></File><File path="LUFA\Drivers\USB\LowLevel\HostChapter9.c"></File><File path="LUFA\Drivers\USB\LowLevel\OTG.h"></File><File path="LUFA\Drivers\USB\LowLevel\USBMode.h"></File><File path="LUFA\Drivers\USB\LowLevel\StreamCallbacks.h"></File></Folder><Folder name="HighLevel"><File path="LUFA\Drivers\USB\HighLevel\USBTask.h"></File><File path="LUFA\Drivers\USB\HighLevel\Events.c"></File><File path="LUFA\Drivers\USB\HighLevel\Events.h"></File><File path="LUFA\Drivers\USB\HighLevel\USBInterrupt.c"></File><File path="LUFA\Drivers\USB\HighLevel\USBInterrupt.h"></File><File path="LUFA\Drivers\USB\HighLevel\USBTask.c"></File><File path="LUFA\Drivers\USB\HighLevel\StdDescriptors.c"></File><File path="LUFA\Drivers\USB\HighLevel\StdDescriptors.h"></File></Folder><Folder name="Class"><File path="LUFA\Drivers\USB\Class\HIDParser.c"></File><File path="LUFA\Drivers\USB\Class\HIDParser.h"></File><File path="LUFA\Drivers\USB\Class\HIDReportData.h"></File><File path="LUFA\Drivers\USB\Class\ConfigDescriptor.c"></File><File path="LUFA\Drivers\USB\Class\ConfigDescriptor.h"></File></Folder><File path="LUFA\Drivers\USB\USB.h"></File></Folder><Folder name="Misc"><File path="LUFA\Drivers\Misc\TerminalCodes.h"></File></Folder><Folder name="AT90USBXXX"><Folder name="AT90USBXXX67"><File path="LUFA\Drivers\AT90USBXXX\AT90USBXXX67\ADC.h"></File></Folder><File path="LUFA\Drivers\AT90USBXXX\Serial_Stream.h"></File><File path="LUFA\Drivers\AT90USBXXX\ADC.h"></File><File path="LUFA\Drivers\AT90USBXXX\Serial.c"></File><File path="LUFA\Drivers\AT90USBXXX\Serial.h"></File><File path="LUFA\Drivers\AT90USBXXX\Serial_Stream.c"></File><File path="LUFA\Drivers\AT90USBXXX\SPI.h"></File></Folder><Folder name="Board"><Folder name="USBKEY"><File path="LUFA\Drivers\Board\USBKEY\Dataflash.h"></File><File path="LUFA\Drivers\Board\USBKEY\Joystick.h"></File><File path="LUFA\Drivers\Board\USBKEY\HWB.h"></File><File path="LUFA\Drivers\Board\USBKEY\AT45DB642D.h"></File><File path="LUFA\Drivers\Board\USBKEY\LEDs.h"></File></Folder><Folder name="STK526"><File path="LUFA\Drivers\Board\STK526\Dataflash.h"></File><File path="LUFA\Drivers\Board\STK526\Joystick.h"></File><File path="LUFA\Drivers\Board\STK526\HWB.h"></File><File path="LUFA\Drivers\Board\STK526\AT45DB642D.h"></File><File path="LUFA\Drivers\Board\STK526\LEDs.h"></File></Folder><Folder name="STK525"><File path="LUFA\Drivers\Board\STK525\Dataflash.h"></File><File path="LUFA\Drivers\Board\STK525\Joystick.h"></File><File path="LUFA\Drivers\Board\STK525\HWB.h"></File><File path="LUFA\Drivers\Board\STK525\AT45DB321C.h"></File><File path="LUFA\Drivers\Board\STK525\LEDs.h"></File></Folder><Folder name="RZUSBSTICK"><File path="LUFA\Drivers\Board\RZUSBSTICK\LEDs.h"></File></Folder><Folder name="ATAVRUSBRF01"><File path="LUFA\Drivers\Board\ATAVRUSBRF01\LEDs.h"></File><File path="LUFA\Drivers\Board\ATAVRUSBRF01\HWB.h"></File></Folder><File path="LUFA\Drivers\Board\Temperature.h"></File><File path="LUFA\Drivers\Board\Dataflash.h"></File><File path="LUFA\Drivers\Board\HWB.h"></File><File path="LUFA\Drivers\Board\Joystick.h"></File><File path="LUFA\Drivers\Board\Temperature.c"></File><File path="LUFA\Drivers\Board\LEDs.h"></File></Folder></Folder><Folder name="Scheduler"><File path="LUFA\Scheduler\Scheduler.h"></File><File path="LUFA\Scheduler\Scheduler.c"></File></Folder><Folder name="MemoryAllocator"><File path="LUFA\MemoryAllocator\DynAlloc.h"></File><File path="LUFA\MemoryAllocator\DynAlloc.c"></File></Folder><Folder name="DriverStubs"><File path="LUFA\DriverStubs\Dataflash.h"></File><File path="LUFA\DriverStubs\HWB.h"></File><File path="LUFA\DriverStubs\Joystick.h"></File><File path="LUFA\DriverStubs\LEDs.h"></File></Folder><File path="LUFA\makefile"></File><File path="LUFA\Version.h"></File><File path="LUFA\BuildingLinkableLibraries.txt"></File><File path="LUFA\GettingStarted.txt"></File><File path="LUFA\MainPage.txt"></File><File path="LUFA\SchedulerOverview.txt"></File><File path="LUFA\VIDAndPIDValues.txt"></File><File path="LUFA\ChangeLog.txt"></File><File path="LUFA\CompileTimeTokens.txt"></File><File path="LUFA\MigrationInformation.txt"></File><File path="LUFA\DirectorySummaries.txt"></File><File path="LUFA\Doxygen.conf"></File><File path="LUFA\WritingBoardDrivers.txt"></File></Folder><Folder name="Projects"><Folder name="MagStripe"><File path="Projects\Magstripe\Descriptors.c"></File><File path="Projects\Magstripe\Descriptors.h"></File><File path="Projects\Magstripe\Magstripe.c"></File><File path="Projects\Magstripe\Magstripe.h"></File><File path="Projects\Magstripe\MagstripeHW.h"></File><File path="Projects\Magstripe\makefile"></File><File path="Projects\Magstripe\Magstripe.txt"></File><File path="Projects\Magstripe\Doxygen.conf"></File><File path="Projects\Magstripe\CircularBitBuffer.c"></File><File path="Projects\Magstripe\CircularBitBuffer.h"></File></Folder><Folder name="AVRISP_Programmer"><File path="Projects\AVRISP_Programmer\AVRISP_Firmware_Design.txt"></File><File path="Projects\AVRISP_Programmer\AVRISP_Programmer.c"></File><File path="Projects\AVRISP_Programmer\AVRISP_Programmer.h"></File><File path="Projects\AVRISP_Programmer\AVRISP_Programmer.txt"></File><File path="Projects\AVRISP_Programmer\Descriptors.c"></File><File path="Projects\AVRISP_Programmer\makefile"></File><File path="Projects\AVRISP_Programmer\Sample_Programming_Session.txt"></File><File path="Projects\AVRISP_Programmer\RingBuff.c"></File><File path="Projects\AVRISP_Programmer\RingBuff.h"></File><File path="Projects\AVRISP_Programmer\Descriptors.h"></File></Folder><File path="Projects\makefile"></File></Folder><Folder name="Bootloaders"><Folder name="DFU"><File path="Bootloaders\DFU\BootloaderDFU.c"></File><File path="Bootloaders\DFU\BootloaderDFU.h"></File><File path="Bootloaders\DFU\Descriptors.c"></File><File path="Bootloaders\DFU\Descriptors.h"></File><File path="Bootloaders\DFU\makefile"></File><File path="Bootloaders\DFU\BootloaderDFU.txt"></File><File path="Bootloaders\DFU\Doxygen.conf"></File></Folder><Folder name="CDC"><File path="Bootloaders\CDC\BootloaderCDC.c"></File><File path="Bootloaders\CDC\BootloaderCDC.h"></File><File path="Bootloaders\CDC\Descriptors.c"></File><File path="Bootloaders\CDC\Descriptors.h"></File><File path="Bootloaders\CDC\makefile"></File><File path="Bootloaders\CDC\LUFA CDC Bootloader.inf"></File><File path="Bootloaders\CDC\Doxygen.conf"></File><File path="Bootloaders\CDC\BootloaderCDC.txt"></File></Folder><Folder name="TeensyHID"><File path="Bootloaders\TeensyHID\Descriptors.c"></File><File path="Bootloaders\TeensyHID\Descriptors.h"></File><File path="Bootloaders\TeensyHID\makefile"></File><File path="Bootloaders\TeensyHID\TeensyHID.c"></File><File path="Bootloaders\TeensyHID\TeensyHID.h"></File><File path="Bootloaders\TeensyHID\TeensyHID.txt"></File></Folder><File path="Bootloaders\makefile"></File></Folder><File path="makefile"></File></Project>
\ No newline at end of file diff --git a/LUFA/MainPage.txt b/LUFA/MainPage.txt index e5909f7ed..f0524a1ca 100644 --- a/LUFA/MainPage.txt +++ b/LUFA/MainPage.txt @@ -38,6 +38,12 @@ * \section Sec_License License
* The LUFA library is currently released under the MIT licence, included below.
*
+ * Commercial entities can opt out of the public disclosure clause in this license
+ * for a one-time US$1500 payment. This provides a non-exclusive modified MIT licensed which
+ * allows for the free use of the LUFA library, bootloaders and (where the sole copyright
+ * is attributed to Dean Camera) demos without public disclosure within an organisation. Please
+ * contact the author for more information.
+ *
* \verbatim
* Permission to use, copy, modify, and distribute this software
* and its documentation for any purpose and without fee is hereby
|