Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.

1 files changed, 85 insertions, 85 deletions

diff --git a/Projects/TemperatureDataLogger/TemperatureDataLogger.txt b/Projects/TemperatureDataLogger/TemperatureDataLogger.txt
index 280c5fe02..136d0385b 100644
--- a/Projects/TemperatureDataLogger/TemperatureDataLogger.txt
+++ b/Projects/TemperatureDataLogger/TemperatureDataLogger.txt
@@ -1,85 +1,85 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

- 

-/** \mainpage Temperature Datalogger Project

- *

- *  \section SSec_Compat Demo Compatibility:

- *

- *  The following list indicates what microcontrollers are compatible with this demo.

- *

- *  - Series 7 USB AVRs

- *  - Series 6 USB AVRs

- *  - Series 4 USB AVRs (with >16KB of FLASH)

- *

- *  \section SSec_Info USB Information:

- *

- *  The following table gives a rundown of the USB utilization of this demo.

- *

- *  <table>

- *   <tr>

- *    <td><b>USB Mode:</b></td>

- *    <td>Device</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Classes:</b></td>

- *    <td>Mass Storage Device \n

- *        Human Interface Device</td>

- *   </tr>

- *   <tr> 

- *    <td><b>USB Subclasses:</b></td>

- *    <td>Bulk-Only Transport \n

- *        Keyboard Subclass</td>

- *   </tr>

- *   <tr>

- *    <td><b>Relevant Standards:</b></td>

- *    <td>USBIF Mass Storage Standard \n

- *        USB Bulk-Only Transport Standard \n

- *        SCSI Primary Commands Specification \n

- *        SCSI Block Commands Specification \n

- *        USBIF HID Specification, USBIF HID Usage Tables</td>

- *   </tr>

- *   <tr>

- *    <td><b>Usable Speeds:</b></td>

- *    <td>Full Speed Mode</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_Description Project Description: 

- *

- *  Temperature Data Logger project. This project is a very basic USB data logger for the current temperature as reported by

- *  the board's temperature sensor, writing the temperature to a file stored on the board's Dataflash in a FAT filesystem

- *  each time a specified interval elapses. When inserted into a PC, the datalogger will appear as a standard USB Mass Storage

- *  device with a single text file, which contains the logged data. Files are named according to the current date when the

- *  logging commences.

- *

- *  A DS1307 or compatible RTC IC is designed to be attached to the AVR's TWI bus, for the management of timestamps on the

- *  sampled data. This project will not function correctly if the RTC chip is omitted unless the DUMMY_RTC compile time token

- *  is specified - see \ref SSec_Options.

- *

- *  Due to the host's need for exclusive access to the filesystem, the device will not log samples while connected to a host.

- *  For the logger to store data, the Dataflash must first be formatted by the host so that it contains a valid FAT filesystem.

- *

- *  This project uses the FatFS library from ELM Chan (http://elm-chan.org/fsw/ff/00index_e.html) and the .NET HID device library

- *  LibHIDNet (http://sourceforge.net/projects/libhidnet/).

- *

- *  \section SSec_Options Project Options

- *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

- *

- *  <table>

- *   <tr>

- *    <td><b>Define Name:</b></td>

- *    <td><b>Location:</b></td>

- *    <td><b>Description:</b></td>

- *   </tr>

- *   <tr>

- *    <td>DUMMY_RTC</td>

- *    <td>Makefile CDEFS</td>

- *    <td>When a DS1307 RTC chip is not fitted, this token can be defined to make the demo assume a 1/1/1 01:01:01 date/time

- *        stamp at all times, effectively transforming the project into a basic data logger with no specified sample times.</td>

- *   </tr>

- *  </table>

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+ 
+/** \mainpage Temperature Datalogger Project
+ *
+ *  \section SSec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  - Series 7 USB AVRs
+ *  - Series 6 USB AVRs
+ *  - Series 4 USB AVRs (with >16KB of FLASH)
+ *
+ *  \section SSec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Classes:</b></td>
+ *    <td>Mass Storage Device \n
+ *        Human Interface Device</td>
+ *   </tr>
+ *   <tr> 
+ *    <td><b>USB Subclasses:</b></td>
+ *    <td>Bulk-Only Transport \n
+ *        Keyboard Subclass</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Mass Storage Standard \n
+ *        USB Bulk-Only Transport Standard \n
+ *        SCSI Primary Commands Specification \n
+ *        SCSI Block Commands Specification \n
+ *        USBIF HID Specification, USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Usable Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_Description Project Description: 
+ *
+ *  Temperature Data Logger project. This project is a very basic USB data logger for the current temperature as reported by
+ *  the board's temperature sensor, writing the temperature to a file stored on the board's Dataflash in a FAT filesystem
+ *  each time a specified interval elapses. When inserted into a PC, the datalogger will appear as a standard USB Mass Storage
+ *  device with a single text file, which contains the logged data. Files are named according to the current date when the
+ *  logging commences.
+ *
+ *  A DS1307 or compatible RTC IC is designed to be attached to the AVR's TWI bus, for the management of timestamps on the
+ *  sampled data. This project will not function correctly if the RTC chip is omitted unless the DUMMY_RTC compile time token
+ *  is specified - see \ref SSec_Options.
+ *
+ *  Due to the host's need for exclusive access to the filesystem, the device will not log samples while connected to a host.
+ *  For the logger to store data, the Dataflash must first be formatted by the host so that it contains a valid FAT filesystem.
+ *
+ *  This project uses the FatFS library from ELM Chan (http://elm-chan.org/fsw/ff/00index_e.html) and the .NET HID device library
+ *  LibHIDNet (http://sourceforge.net/projects/libhidnet/).
+ *
+ *  \section SSec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>Define Name:</b></td>
+ *    <td><b>Location:</b></td>
+ *    <td><b>Description:</b></td>
+ *   </tr>
+ *   <tr>
+ *    <td>DUMMY_RTC</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>When a DS1307 RTC chip is not fitted, this token can be defined to make the demo assume a 1/1/1 01:01:01 date/time
+ *        stamp at all times, effectively transforming the project into a basic data logger with no specified sample times.</td>
+ *   </tr>
+ *  </table>
+ */