Spell check all source files once again to find any typos.

5 files changed, 75 insertions, 75 deletions

diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.c b/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.c
index b274a1083..af6c865a6 100644
--- a/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.c
+++ b/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.c
@@ -30,7 +30,7 @@
 
 /** \file
  *
- *  Functions to manage the physical dataflash media, including reading and writing of
+ *  Functions to manage the physical Dataflash media, including reading and writing of
  *  blocks of data. These functions are called by the SCSI layer when data must be stored
  *  or retrieved to/from the physical storage media. If a different media is used (such
  *  as a SD card or EEPROM), functions similar to these will need to be generated.
@@ -40,9 +40,9 @@
 #include "DataflashManager.h"
 
 #if defined(USB_CAN_BE_DEVICE)
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board dataflash IC(s), from
+/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
  *  the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes
- *  them to the dataflash in Dataflash page sized blocks.
+ *  them to the Dataflash in Dataflash page sized blocks.
  *
  *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
  *  \param[in] BlockAddress  Data block starting address for the write sequence
@@ -61,13 +61,13 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 	Dataflash_SelectChipFromPage(CurrDFPage);
 
 #if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the dataflash buffer */
+	/* Copy selected dataflash's current page contents to the Dataflash buffer */
 	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
 	Dataflash_SendAddressBytes(CurrDFPage, 0);
 	Dataflash_WaitWhileBusy();
 #endif
 
-	/* Send the dataflash buffer write command */
+	/* Send the Dataflash buffer write command */
 	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
 	Dataflash_SendAddressBytes(0, CurrDFPageByte);
 
@@ -79,7 +79,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 	{
 		uint8_t BytesInBlockDiv16 = 0;
 		
-		/* Write an endpoint packet sized data block to the dataflash */
+		/* Write an endpoint packet sized data block to the Dataflash */
 		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
 		{
 			/* Check if the endpoint is currently empty */
@@ -93,30 +93,30 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 				  return;
 			}
 
-			/* Check if end of dataflash page reached */
+			/* Check if end of Dataflash page reached */
 			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
 			{
-				/* Write the dataflash buffer contents back to the dataflash page */
+				/* Write the Dataflash buffer contents back to the Dataflash page */
 				Dataflash_WaitWhileBusy();
 				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
 				Dataflash_SendAddressBytes(CurrDFPage, 0);
 
-				/* Reset the dataflash buffer counter, increment the page counter */
+				/* Reset the Dataflash buffer counter, increment the page counter */
 				CurrDFPageByteDiv16 = 0;
 				CurrDFPage++;
 
-				/* Once all the dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
+				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
 				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
 				  UsingSecondBuffer = !(UsingSecondBuffer);
 
-				/* Select the next dataflash chip based on the new dataflash page index */
+				/* Select the next Dataflash chip based on the new Dataflash page index */
 				Dataflash_SelectChipFromPage(CurrDFPage);
 
 #if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one dataflash page remaining, copy over the existing page to preserve trailing data */
+				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
 				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
 				{
-					/* Copy selected dataflash's current page contents to the dataflash buffer */
+					/* Copy selected dataflash's current page contents to the Dataflash buffer */
 					Dataflash_WaitWhileBusy();
 					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
 					Dataflash_SendAddressBytes(CurrDFPage, 0);
@@ -124,12 +124,12 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 				}
 #endif
 
-				/* Send the dataflash buffer write command */
+				/* Send the Dataflash buffer write command */
 				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
 				Dataflash_SendAddressBytes(0, 0);				
 			}
 
-			/* Write one 16-byte chunk of data to the dataflash */
+			/* Write one 16-byte chunk of data to the Dataflash */
 			Dataflash_SendByte(Endpoint_Read_Byte());
 			Dataflash_SendByte(Endpoint_Read_Byte());
 			Dataflash_SendByte(Endpoint_Read_Byte());
@@ -147,7 +147,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 			Dataflash_SendByte(Endpoint_Read_Byte());
 			Dataflash_SendByte(Endpoint_Read_Byte());
 			
-			/* Increment the dataflash page 16 byte block counter */
+			/* Increment the Dataflash page 16 byte block counter */
 			CurrDFPageByteDiv16++;
 
 			/* Increment the block 16 byte block counter */
@@ -162,7 +162,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 		TotalBlocks--;
 	}
 
-	/* Write the dataflash buffer contents back to the dataflash page */
+	/* Write the Dataflash buffer contents back to the Dataflash page */
 	Dataflash_WaitWhileBusy();
 	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
 	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
@@ -172,11 +172,11 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 	if (!(Endpoint_IsReadWriteAllowed()))
 	  Endpoint_ClearOUT();
 
-	/* Deselect all dataflash chips */
+	/* Deselect all Dataflash chips */
 	Dataflash_DeselectChip();
 }
 
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board dataflash IC(s), into
+/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
  *  the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash
  *  and writes them in OS sized blocks to the endpoint.
  *
@@ -195,7 +195,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
 	/* Select the correct starting Dataflash IC for the block requested */
 	Dataflash_SelectChipFromPage(CurrDFPage);
 
-	/* Send the dataflash main memory page read command */
+	/* Send the Dataflash main memory page read command */
 	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
 	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
 	Dataflash_SendByte(0x00);
@@ -211,7 +211,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
 	{
 		uint8_t BytesInBlockDiv16 = 0;
 		
-		/* Write an endpoint packet sized data block to the dataflash */
+		/* Write an endpoint packet sized data block to the Dataflash */
 		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
 		{
 			/* Check if the endpoint is currently full */
@@ -225,17 +225,17 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
 				  return;
 			}
 			
-			/* Check if end of dataflash page reached */
+			/* Check if end of Dataflash page reached */
 			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
 			{
-				/* Reset the dataflash buffer counter, increment the page counter */
+				/* Reset the Dataflash buffer counter, increment the page counter */
 				CurrDFPageByteDiv16 = 0;
 				CurrDFPage++;
 
-				/* Select the next dataflash chip based on the new dataflash page index */
+				/* Select the next Dataflash chip based on the new Dataflash page index */
 				Dataflash_SelectChipFromPage(CurrDFPage);
 				
-				/* Send the dataflash main memory page read command */
+				/* Send the Dataflash main memory page read command */
 				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
 				Dataflash_SendAddressBytes(CurrDFPage, 0);
 				Dataflash_SendByte(0x00);
@@ -244,7 +244,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
 				Dataflash_SendByte(0x00);
 			}	
 
-			/* Read one 16-byte chunk of data from the dataflash */
+			/* Read one 16-byte chunk of data from the Dataflash */
 			Endpoint_Write_Byte(Dataflash_ReceiveByte());
 			Endpoint_Write_Byte(Dataflash_ReceiveByte());
 			Endpoint_Write_Byte(Dataflash_ReceiveByte());
@@ -262,7 +262,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
 			Endpoint_Write_Byte(Dataflash_ReceiveByte());
 			Endpoint_Write_Byte(Dataflash_ReceiveByte());
 			
-			/* Increment the dataflash page 16 byte block counter */
+			/* Increment the Dataflash page 16 byte block counter */
 			CurrDFPageByteDiv16++;
 			
 			/* Increment the block 16 byte block counter */
@@ -281,14 +281,14 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
 	if (!(Endpoint_IsReadWriteAllowed()))
 	  Endpoint_ClearIN();
 
-	/* Deselect all dataflash chips */
+	/* Deselect all Dataflash chips */
 	Dataflash_DeselectChip();
 }
 
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board dataflash IC(s), from
+/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
  *  the a given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the
- *  dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
- *  dataflash.
+ *  Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
+ *  Dataflash.
  *
  *  \param[in] BlockAddress  Data block starting address for the write sequence
  *  \param[in] TotalBlocks   Number of blocks of data to write
@@ -307,13 +307,13 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
 	Dataflash_SelectChipFromPage(CurrDFPage);
 
 #if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the dataflash buffer */
+	/* Copy selected dataflash's current page contents to the Dataflash buffer */
 	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
 	Dataflash_SendAddressBytes(CurrDFPage, 0);
 	Dataflash_WaitWhileBusy();
 #endif
 
-	/* Send the dataflash buffer write command */
+	/* Send the Dataflash buffer write command */
 	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
 	Dataflash_SendAddressBytes(0, CurrDFPageByte);
 	
@@ -321,33 +321,33 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
 	{
 		uint8_t BytesInBlockDiv16 = 0;
 		
-		/* Write an endpoint packet sized data block to the dataflash */
+		/* Write an endpoint packet sized data block to the Dataflash */
 		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
 		{
-			/* Check if end of dataflash page reached */
+			/* Check if end of Dataflash page reached */
 			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
 			{
-				/* Write the dataflash buffer contents back to the dataflash page */
+				/* Write the Dataflash buffer contents back to the Dataflash page */
 				Dataflash_WaitWhileBusy();
 				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
 				Dataflash_SendAddressBytes(CurrDFPage, 0);
 
-				/* Reset the dataflash buffer counter, increment the page counter */
+				/* Reset the Dataflash buffer counter, increment the page counter */
 				CurrDFPageByteDiv16 = 0;
 				CurrDFPage++;
 
-				/* Once all the dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
+				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
 				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
 				  UsingSecondBuffer = !(UsingSecondBuffer);
 
-				/* Select the next dataflash chip based on the new dataflash page index */
+				/* Select the next Dataflash chip based on the new Dataflash page index */
 				Dataflash_SelectChipFromPage(CurrDFPage);
 
 #if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one dataflash page remaining, copy over the existing page to preserve trailing data */
+				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
 				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
 				{
-					/* Copy selected dataflash's current page contents to the dataflash buffer */
+					/* Copy selected dataflash's current page contents to the Dataflash buffer */
 					Dataflash_WaitWhileBusy();
 					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
 					Dataflash_SendAddressBytes(CurrDFPage, 0);
@@ -355,17 +355,17 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
 				}
 #endif
 
-				/* Send the dataflash buffer write command */
+				/* Send the Dataflash buffer write command */
 				Dataflash_ToggleSelectedChipCS();
 				Dataflash_SendByte(DF_CMD_BUFF1WRITE);
 				Dataflash_SendAddressBytes(0, 0);
 			}
 			
-			/* Write one 16-byte chunk of data to the dataflash */
+			/* Write one 16-byte chunk of data to the Dataflash */
 			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
 			  Dataflash_SendByte(*(BufferPtr++));
 			
-			/* Increment the dataflash page 16 byte block counter */
+			/* Increment the Dataflash page 16 byte block counter */
 			CurrDFPageByteDiv16++;
 
 			/* Increment the block 16 byte block counter */
@@ -376,20 +376,20 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
 		TotalBlocks--;
 	}
 
-	/* Write the dataflash buffer contents back to the dataflash page */
+	/* Write the Dataflash buffer contents back to the Dataflash page */
 	Dataflash_WaitWhileBusy();
 	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
 	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
 	Dataflash_WaitWhileBusy();
 
-	/* Deselect all dataflash chips */
+	/* Deselect all Dataflash chips */
 	Dataflash_DeselectChip();
 }
 
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board dataflash IC(s), into
+/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
  *  the a preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash
  *  and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read
- *  the files stored on the dataflash.
+ *  the files stored on the Dataflash.
  *
  *  \param[in] BlockAddress  Data block starting address for the read sequence
  *  \param[in] TotalBlocks   Number of blocks of data to read
@@ -406,7 +406,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
 	/* Select the correct starting Dataflash IC for the block requested */
 	Dataflash_SelectChipFromPage(CurrDFPage);
 
-	/* Send the dataflash main memory page read command */
+	/* Send the Dataflash main memory page read command */
 	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
 	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
 	Dataflash_SendByte(0x00);
@@ -418,20 +418,20 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
 	{
 		uint8_t BytesInBlockDiv16 = 0;
 		
-		/* Write an endpoint packet sized data block to the dataflash */
+		/* Write an endpoint packet sized data block to the Dataflash */
 		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
 		{
-			/* Check if end of dataflash page reached */
+			/* Check if end of Dataflash page reached */
 			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
 			{
-				/* Reset the dataflash buffer counter, increment the page counter */
+				/* Reset the Dataflash buffer counter, increment the page counter */
 				CurrDFPageByteDiv16 = 0;
 				CurrDFPage++;
 
-				/* Select the next dataflash chip based on the new dataflash page index */
+				/* Select the next Dataflash chip based on the new Dataflash page index */
 				Dataflash_SelectChipFromPage(CurrDFPage);
 				
-				/* Send the dataflash main memory page read command */
+				/* Send the Dataflash main memory page read command */
 				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
 				Dataflash_SendAddressBytes(CurrDFPage, 0);
 				Dataflash_SendByte(0x00);
@@ -440,11 +440,11 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
 				Dataflash_SendByte(0x00);
 			}	
 
-			/* Read one 16-byte chunk of data from the dataflash */
+			/* Read one 16-byte chunk of data from the Dataflash */
 			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
 			  *(BufferPtr++) = Dataflash_ReceiveByte();
 			
-			/* Increment the dataflash page 16 byte block counter */
+			/* Increment the Dataflash page 16 byte block counter */
 			CurrDFPageByteDiv16++;
 			
 			/* Increment the block 16 byte block counter */
@@ -455,14 +455,14 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
 		TotalBlocks--;
 	}
 
-	/* Deselect all dataflash chips */
+	/* Deselect all Dataflash chips */
 	Dataflash_DeselectChip();
 }
 
-/** Disables the dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
+/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
 void DataflashManager_ResetDataflashProtections(void)
 {
-	/* Select first dataflash chip, send the read status register command */
+	/* Select first Dataflash chip, send the read status register command */
 	Dataflash_SelectChip(DATAFLASH_CHIP1);
 	Dataflash_SendByte(DF_CMD_GETSTATUS);
 	
@@ -478,7 +478,7 @@ void DataflashManager_ResetDataflashProtections(void)
 		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
 	}
 	
-	/* Select second dataflash chip (if present on selected board), send read status register command */
+	/* Select second Dataflash chip (if present on selected board), send read status register command */
 	#if (DATAFLASH_TOTALCHIPS == 2)
 	Dataflash_SelectChip(DATAFLASH_CHIP2);
 	Dataflash_SendByte(DF_CMD_GETSTATUS);
@@ -496,7 +496,7 @@ void DataflashManager_ResetDataflashProtections(void)
 	}
 	#endif
 	
-	/* Deselect current dataflash chip */
+	/* Deselect current Dataflash chip */
 	Dataflash_DeselectChip();
 }
 
diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.h b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.h
index 4e9aa76f4..43ba78403 100644
--- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.h
+++ b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.h
@@ -1,5 +1,5 @@
 /*-----------------------------------------------------------------------
-/  PFF - Low level disk interface modlue include file    (C)ChaN, 2010
+/  PFF - Low level disk interface module include file    (C)ChaN, 2010
 /-----------------------------------------------------------------------*/
 
 #ifndef _DISKIO
@@ -15,7 +15,7 @@ typedef BYTE	DSTATUS;
 typedef enum {
 	RES_OK = 0,		/* 0: Function succeeded */
 	RES_ERROR,		/* 1: Disk error */
-	RES_STRERR,		/* 2: Seream error */
+	RES_STRERR,		/* 2: Stream error */
 	RES_NOTRDY,		/* 3: Not ready */
 	RES_PARERR		/* 4: Invalid parameter */
 } DRESULT;
diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.c b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.c
index b7b7fb8cb..85b88e6e1 100644
--- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.c
+++ b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.c
@@ -3,7 +3,7 @@
 /-----------------------------------------------------------------------------/
 / Petit FatFs module is an open source software to implement FAT file system to
 / small embedded systems. This is a free software and is opened for education,
-/ research and commercial developments under license policy of following trems.
+/ research and commercial developments under license policy of following terms.
 /
 /  Copyright (C) 2010, ChaN, all right reserved.
 /
@@ -106,7 +106,7 @@ CLUST get_fat (	/* 1:IO error, Else:Cluster status */
 #endif
 	}
 
-	return 1;	/* An error occured at the disk I/O layer */
+	return 1;	/* An error occurred at the disk I/O layer */
 }
 
 
@@ -167,7 +167,7 @@ FRESULT dir_rewind (
 /*-----------------------------------------------------------------------*/
 
 static
-FRESULT dir_next (	/* FR_OK:Succeeded, FR_NO_FILE:End of table, FR_DENIED:EOT and could not streach */
+FRESULT dir_next (	/* FR_OK:Succeeded, FR_NO_FILE:End of table, FR_DENIED:EOT and could not stretch */
 	DIR *dj			/* Pointer to directory object */
 )
 {
@@ -310,7 +310,7 @@ FRESULT create_name (
 		sfn[i++] = c;
 	}
 	if (!i) return FR_INVALID_NAME;		/* Reject null string */
-	*path = &p[si];						/* Rerurn pointer to the next segment */
+	*path = &p[si];						/* Rerun pointer to the next segment */
 
 	sfn[11] = (c < ' ') ? 1 : 0;		/* Set last segment flag if end of path */
 
@@ -448,7 +448,7 @@ BYTE check_fs (	/* 0:The FAT boot record, 1:Valid boot record but not an FAT, 2:
 
 
 /*-----------------------------------------------------------------------*/
-/* Mount/Unmount a Locical Drive                                         */
+/* Mount/Unmount a Logical Drive                                         */
 /*-----------------------------------------------------------------------*/
 
 FRESULT pf_mount (
@@ -480,7 +480,7 @@ FRESULT pf_mount (
 		}
 	}
 	if (fmt == 3) return FR_DISK_ERR;
-	if (fmt) return FR_NO_FILESYSTEM;	/* No valid FAT patition is found */
+	if (fmt) return FR_NO_FILESYSTEM;	/* No valid FAT partition is found */
 
 	/* Initialize the file system object */
 	if (disk_readp(buf, bsect, 13, sizeof(buf))) return FR_DISK_ERR;
@@ -491,7 +491,7 @@ FRESULT pf_mount (
 	fsize *= buf[BPB_NumFATs-13];						/* Number of sectors in FAT area */
 	fs->fatbase = bsect + LD_WORD(buf+BPB_RsvdSecCnt-13); /* FAT start sector (lba) */
 	fs->csize = buf[BPB_SecPerClus-13];					/* Number of sectors per cluster */
-	fs->n_rootdir = LD_WORD(buf+BPB_RootEntCnt-13);		/* Nmuber of root directory entries */
+	fs->n_rootdir = LD_WORD(buf+BPB_RootEntCnt-13);		/* Number of root directory entries */
 	tsect = LD_WORD(buf+BPB_TotSec16-13);				/* Number of sectors on the file system */
 	if (!tsect) tsect = LD_DWORD(buf+BPB_TotSec32-13);
 	mclst = (tsect						/* Last cluster# + 1 */
@@ -688,7 +688,7 @@ FRESULT pf_lseek (
 
 #if _USE_DIR
 /*-----------------------------------------------------------------------*/
-/* Create a Directroy Object                                             */
+/* Create a Directory Object                                             */
 /*-----------------------------------------------------------------------*/
 
 FRESULT pf_opendir (
@@ -733,7 +733,7 @@ FRESULT pf_opendir (
 
 
 /*-----------------------------------------------------------------------*/
-/* Read Directory Entry in Sequense                                      */
+/* Read Directory Entry in Sequence                                      */
 /*-----------------------------------------------------------------------*/
 
 FRESULT pf_readdir (
diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c b/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c
index 0bf6abdf7..29f97491d 100644
--- a/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c
+++ b/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c
@@ -242,7 +242,7 @@ static void SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInte
 }
 
 /** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
- *  and total number of blocks to process, then calls the appropriate low-level dataflash routine to handle the actual
+ *  and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual
  *  reading and writing of the data.
  *
  *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
diff --git a/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.c b/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.c
index 4db5a568a..4b019bd37 100644
--- a/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.c
+++ b/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.c
@@ -40,7 +40,7 @@
 /** Standard file stream for the currently open file on the disk. */
 FILE DiskStream = FDEV_SETUP_STREAM(NULL, Disk_getchar, _FDEV_SETUP_READ);
 
-/** Petite FAT Fs structure to hold the internal state of the FAT driver for the dataflash contents. */
+/** Petite FAT Fs structure to hold the internal state of the FAT driver for the Dataflash contents. */
 FATFS DiskFATState;
 
 /** Stream character fetching routine for the FAT driver so that characters from the currently open file can be
@@ -68,7 +68,7 @@ void EVENT_USB_UIDChange(void)
 #endif
 
 /** Task to determine if the user is wishes to start the programming sequence, and if so executes the 
- *  required functions to program the attached target (if any) with the files loaded to the dataflash.
+ *  required functions to program the attached target (if any) with the files loaded to the Dataflash.
  */
 void Programmer_Task(void)
 {