Added extra note about missing OUT endpoint configuration to the HID Device mode Class driver.

Added pinout information to the AVRISP project.

1 files changed, 37 insertions, 1 deletions

diff --git a/Projects/AVRISP/AVRISP.txt b/Projects/AVRISP/AVRISP.txt
index 8d299e25a..a9d550786 100644
--- a/Projects/AVRISP/AVRISP.txt
+++ b/Projects/AVRISP/AVRISP.txt
@@ -66,6 +66,42 @@
  *  set to an appropriate ADC channel number in the project makefile for VTARGET detection to operate correctly. On models

  *  without an ADC converter, VTARGET will report at a fixed 5V level.

  *

+ *  Connections to the device are simple:

+ *

+ *  <table>

+ *   <tr>

+ *    <td><b>Programmer Pin:</b></td>

+ *    <td><b>Target Device Pin:</b></td>

+ *   </tr>

+ *   <tr>

+ *    <td>MOSI</td>

+ *    <td>PDI</td>

+ *   </tr>

+ *   <tr>

+ *    <td>MISO</td>

+ *    <td>PDO</td>

+ *   </tr>

+ *   <tr>

+ *    <td>SCLK</td>

+ *    <td>SCLK</td>

+ *   </tr>

+ *   <tr>

+ *    <td>GND</td>

+ *    <td>GND</td>

+ *   </tr>

+ *   <tr>

+ *    <td>ADCx <b><sup>1</sup></b></td>

+ *    <td>VTARGET</td>

+ *   </tr>

+ *   <tr>

+ *    <td>PORTx.y <b><sup>2</sup></b></td>

+ *    <td>/RESET</td>

+ *   </tr>

+ *  </table>

+ *

+ *  <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n

+ *  <b><sup>2</sup></b> <i>See \ref SSec_Options section</i>

+ *

  *  \section SSec_Options Project Options

  *

  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

@@ -89,7 +125,7 @@
  *   <tr>

  *    <td>RESET_LINE_MASK</td>

  *    <td>Makefile CDEFS</td>

- *    <td>Mask for the programmer's target RESET line on the chosen port.</td>

+ *    <td>Mask for the programmer's target RESET line on the chosen port. <b>Must not be the AVR's /SS pin.</b></td>

  *   </tr>

  *   <tr>

  *    <td>VTARGET_ADC_CHANNEL</td>