Rename AVRISP project folder to AVRISP-MKII.

1 files changed, 0 insertions, 439 deletions

diff --git a/Projects/AVRISP/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP/Lib/XPROG/XPROGProtocol.c
deleted file mode 100644
index bccb96c2c..000000000
--- a/Projects/AVRISP/Lib/XPROG/XPROGProtocol.c
+++ /dev/null
@@ -1,439 +0,0 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2009.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, and distribute this software

-  and its documentation for any purpose and without fee is hereby

-  granted, provided that the above copyright notice appear in all

-  copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  XPROG Protocol handler, to process V2 Protocol wrapped XPROG commands used in Atmel programmer devices.

- */

-

-#define  INCLUDE_FROM_XPROGPROTOCOL_C

-#include "XPROGProtocol.h"

-

-#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)

-/** Base absolute address for the target's NVM controller */

-uint32_t XPROG_Param_NVMBase    = 0x010001C0;

-

-/** Size in bytes of the target's EEPROM page */

-uint32_t XPROG_Param_EEPageSize;

-

-/** Currently selected XPROG programming protocol */

-uint8_t  XPROG_SelectedProtocol = XPRG_PROTOCOL_PDI;

-

-/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI

- *  programming.

- */

-void XPROGProtocol_SetMode(void)

-{

-	struct

-	{

-		uint8_t Protocol;

-	} SetMode_XPROG_Params;

-	

-	Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params));

-

-	Endpoint_ClearOUT();

-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);

-	

-	XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol;

-	

-	Endpoint_Write_Byte(CMD_XPROG_SETMODE);

-	Endpoint_Write_Byte((SetMode_XPROG_Params.Protocol != XPRG_PROTOCOL_JTAG) ? STATUS_CMD_OK : STATUS_CMD_FAILED);

-	Endpoint_ClearIN();	

-}

-

-/** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be

- *  removed and processed so that the underlying XPROG command can be handled.

- */

-void XPROGProtocol_Command(void)

-{

-	uint8_t XPROGCommand = Endpoint_Read_Byte();

-

-	switch (XPROGCommand)

-	{

-		case XPRG_CMD_ENTER_PROGMODE:

-			XPROGProtocol_EnterXPROGMode();

-			break;

-		case XPRG_CMD_LEAVE_PROGMODE:

-			XPROGProtocol_LeaveXPROGMode();

-			break;

-		case XPRG_CMD_ERASE:

-			XPROGProtocol_Erase();

-			break;

-		case XPRG_CMD_WRITE_MEM:

-			XPROGProtocol_WriteMemory();

-			break;

-		case XPRG_CMD_READ_MEM:

-			XPROGProtocol_ReadMemory();

-			break;

-		case XPRG_CMD_CRC:

-			XPROGProtocol_ReadCRC();

-			break;

-		case XPRG_CMD_SET_PARAM:

-			XPROGProtocol_SetParam();

-			break;

-	}

-}

-

-/** Handler for the XPROG ENTER_PROGMODE command to establish a connection with the attached device. */

-static void XPROGProtocol_EnterXPROGMode(void)

-{

-	Endpoint_ClearOUT();

-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);

-	

-	bool NVMBusEnabled;

-

-	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)

-	{

-		/* Enable PDI programming mode with the attached target */

-		XPROGTarget_EnableTargetPDI();

-		

-		/* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */

-		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);	

-		XPROGTarget_SendByte(PDI_RESET_KEY);

-

-		/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */

-		XPROGTarget_SendByte(PDI_CMD_KEY);	

-		for (uint8_t i = sizeof(PDI_NVMENABLE_KEY); i > 0; i--)

-		  XPROGTarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);

-

-		/* Wait until the NVM bus becomes active */

-		NVMBusEnabled = XMEGANVM_WaitWhileNVMBusBusy();

-	}

-	else

-	{

-		/* Enable TPI programming mode with the attached target */

-		XPROGTarget_EnableTargetTPI();

-		

-		/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */

-		XPROGTarget_SendByte(TPI_CMD_SKEY);	

-		for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--)

-		  XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]);

-

-		/* Wait until the NVM bus becomes active */

-		NVMBusEnabled = TINYNVM_WaitWhileNVMBusBusy();

-	}

-	

-	Endpoint_Write_Byte(CMD_XPROG);

-	Endpoint_Write_Byte(XPRG_CMD_ENTER_PROGMODE);

-	Endpoint_Write_Byte(NVMBusEnabled ? XPRG_ERR_OK : XPRG_ERR_FAILED);

-	Endpoint_ClearIN();

-}

-

-/** Handler for the XPROG LEAVE_PROGMODE command to terminate the PDI programming connection with

- *  the attached device.

- */

-static void XPROGProtocol_LeaveXPROGMode(void)

-{

-	Endpoint_ClearOUT();

-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);

-	

-	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)

-	{

-		/* Clear the RESET key in the RESET PDI register to allow the XMEGA to run */

-		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);	

-		XPROGTarget_SendByte(0x00);

-

-		XPROGTarget_DisableTargetPDI();

-	}

-	else

-	{

-		/* Clear the NVMEN bit in the TPI CONTROL register to disable TPI mode */

-		XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);	

-		XPROGTarget_SendByte(0x00);

-	

-		XPROGTarget_DisableTargetTPI();

-	}

-	

-	Endpoint_Write_Byte(CMD_XPROG);

-	Endpoint_Write_Byte(XPRG_CMD_LEAVE_PROGMODE);

-	Endpoint_Write_Byte(XPRG_ERR_OK);

-	Endpoint_ClearIN();

-}

-

-/** Handler for the XPRG ERASE command to erase a specific memory address space in the attached device. */

-static void XPROGProtocol_Erase(void)

-{

-	uint8_t ReturnStatus = XPRG_ERR_OK;

-

-	struct

-	{

-		uint8_t  MemoryType;

-		uint32_t Address;

-	} Erase_XPROG_Params;

-

-	Endpoint_Read_Stream_LE(&Erase_XPROG_Params, sizeof(Erase_XPROG_Params));

-	Erase_XPROG_Params.Address = SwapEndian_32(Erase_XPROG_Params.Address);

-

-	Endpoint_ClearOUT();

-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);

-	

-	uint8_t EraseCommand = XMEGA_NVM_CMD_NOOP;

-	

-	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)

-	{

-		/* Determine which NVM command to send to the device depending on the memory to erase */

-		if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_CHIP)

-		  EraseCommand = XMEGA_NVM_CMD_CHIPERASE;

-		else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_APP)

-		  EraseCommand = XMEGA_NVM_CMD_ERASEAPPSEC;

-		else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_BOOT)

-		  EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSEC;

-		else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_EEPROM)

-		  EraseCommand = XMEGA_NVM_CMD_ERASEEEPROM;

-		else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_APP_PAGE)

-		  EraseCommand = XMEGA_NVM_CMD_ERASEAPPSECPAGE;

-		else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_BOOT_PAGE)

-		  EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSECPAGE;

-		else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_EEPROM_PAGE)

-		  EraseCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGE;

-		else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_USERSIG)

-		  EraseCommand = XMEGA_NVM_CMD_ERASEUSERSIG;

-		

-		/* Erase the target memory, indicate timeout if ocurred */

-		if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))

-		  ReturnStatus = XPRG_ERR_TIMEOUT;

-	}

-	else

-	{

-		// TODO

-	}

-	

-	Endpoint_Write_Byte(CMD_XPROG);

-	Endpoint_Write_Byte(XPRG_CMD_ERASE);

-	Endpoint_Write_Byte(ReturnStatus);

-	Endpoint_ClearIN();	

-}

-

-/** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */

-static void XPROGProtocol_WriteMemory(void)

-{

-	uint8_t ReturnStatus = XPRG_ERR_OK;

-

-	struct

-	{

-		uint8_t  MemoryType;

-		uint8_t  PageMode;

-		uint32_t Address;

-		uint16_t Length;

-		uint8_t  ProgData[256];

-	} WriteMemory_XPROG_Params;

-	

-	Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) -

-	                                                    sizeof(WriteMemory_XPROG_Params).ProgData));

-	WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address);

-	WriteMemory_XPROG_Params.Length  = SwapEndian_16(WriteMemory_XPROG_Params.Length);

-	Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length);

-

-	Endpoint_ClearOUT();

-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);

-

-	/* Assume FLASH page programming by default, as it is the common case */

-	uint8_t WriteCommand     = XMEGA_NVM_CMD_WRITEFLASHPAGE;

-	uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF;

-	uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF;

-	bool    PagedMemory      = true;

-

-	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)

-	{

-		if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_APPL)

-		{

-			WriteCommand     = XMEGA_NVM_CMD_WRITEAPPSECPAGE;

-		}

-		else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_BOOT)

-		{

-			WriteCommand     = XMEGA_NVM_CMD_WRITEBOOTSECPAGE;

-		}

-		else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_EEPROM)

-		{

-			WriteCommand     = XMEGA_NVM_CMD_WRITEEEPROMPAGE;

-			WriteBuffCommand = XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF;

-			EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF;

-		}

-		else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_USERSIG)

-		{

-			/* User signature is paged, but needs us to manually indicate the mode bits since the host doesn't set them */

-			WriteMemory_XPROG_Params.PageMode = (XPRG_PAGEMODE_ERASE | XPRG_PAGEMODE_WRITE);

-			WriteCommand     = XMEGA_NVM_CMD_WRITEUSERSIG;

-		}

-		else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_FUSE)

-		{

-			WriteCommand     = XMEGA_NVM_CMD_WRITEFUSE;

-			PagedMemory      = false;

-		}

-		else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_LOCKBITS)

-		{

-			WriteCommand     = XMEGA_NVM_CMD_WRITELOCK;

-			PagedMemory      = false;

-		}

-		

-		/* Send the appropriate memory write commands to the device, indicate timeout if occurred */

-		if ((PagedMemory && !XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand, 

-													   WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address,

-													   WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length)) ||

-		   (!PagedMemory && !XMEGANVM_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address,

-													   WriteMemory_XPROG_Params.ProgData)))

-		{

-			ReturnStatus = XPRG_ERR_TIMEOUT;

-		}

-	}

-	else

-	{

-		// TODO

-	}

-	

-	Endpoint_Write_Byte(CMD_XPROG);

-	Endpoint_Write_Byte(XPRG_CMD_WRITE_MEM);

-	Endpoint_Write_Byte(ReturnStatus);	

-	Endpoint_ClearIN();

-}

-

-/** Handler for the XPROG READ_MEMORY command to read data from a specific address space within the

- *  attached device.

- */

-static void XPROGProtocol_ReadMemory(void)

-{

-	uint8_t ReturnStatus = XPRG_ERR_OK;

-

-	struct

-	{

-		uint8_t  MemoryType;

-		uint32_t Address;

-		uint16_t Length;

-	} ReadMemory_XPROG_Params;

-	

-	Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params));

-	ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address);

-	ReadMemory_XPROG_Params.Length  = SwapEndian_16(ReadMemory_XPROG_Params.Length);

-

-	Endpoint_ClearOUT();

-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);

-

-	uint8_t ReadBuffer[256];

-	

-	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)

-	{

-		/* Read the target's memory, indicate timeout if occurred */

-		if (!(XMEGANVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))

-		  ReturnStatus = XPRG_ERR_TIMEOUT;

-	}

-	else

-	{

-		// TODO

-	}

-

-	Endpoint_Write_Byte(CMD_XPROG);

-	Endpoint_Write_Byte(XPRG_CMD_READ_MEM);

-	Endpoint_Write_Byte(ReturnStatus);

-	

-	if (ReturnStatus == XPRG_ERR_OK)

-	  Endpoint_Write_Stream_LE(ReadBuffer, ReadMemory_XPROG_Params.Length);

-	

-	Endpoint_ClearIN();

-}

-

-/** Handler for the XPROG CRC command to read a specific memory space's CRC value for comparison between the

- *  attached device's memory and a data set on the host.

- */

-static void XPROGProtocol_ReadCRC(void)

-{

-	uint8_t ReturnStatus = XPRG_ERR_OK;

-	

-	struct

-	{

-		uint8_t CRCType;

-	} ReadCRC_XPROG_Params;

-	

-	Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params));

-	Endpoint_ClearOUT();

-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);

-	

-	uint8_t  CRCCommand = XMEGA_NVM_CMD_NOOP;

-	uint32_t MemoryCRC;

-

-	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)

-	{

-		/* Determine which NVM command to send to the device depending on the memory to CRC */

-		if (ReadCRC_XPROG_Params.CRCType == XPRG_CRC_APP)

-		  CRCCommand = XMEGA_NVM_CMD_APPCRC;

-		else if (ReadCRC_XPROG_Params.CRCType == XPRG_CRC_BOOT)

-		  CRCCommand = XMEGA_NVM_CMD_BOOTCRC;

-		else

-		  CRCCommand = XMEGA_NVM_CMD_FLASHCRC;

-		

-		/* Perform and retrieve the memory CRC, indicate timeout if occurred */

-		if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC)))

-		  ReturnStatus = XPRG_ERR_TIMEOUT;

-	}

-	else

-	{

-		/* TPI does not support memory CRC */

-		ReturnStatus = XPRG_ERR_FAILED;

-	}

-	

-	Endpoint_Write_Byte(CMD_XPROG);

-	Endpoint_Write_Byte(XPRG_CMD_CRC);

-	Endpoint_Write_Byte(ReturnStatus);

-	

-	if (ReturnStatus == XPRG_ERR_OK)

-	{

-		Endpoint_Write_Byte(MemoryCRC >> 16);

-		Endpoint_Write_Word_LE(MemoryCRC & 0xFFFF);		

-	}

-	

-	Endpoint_ClearIN();	

-}

-

-/** Handler for the XPROG SET_PARAM command to set a XPROG parameter for use when communicating with the

- *  attached device.

- */

-static void XPROGProtocol_SetParam(void)

-{

-	uint8_t ReturnStatus = XPRG_ERR_OK;

-

-	uint8_t XPROGParam = Endpoint_Read_Byte();

-	

-	/* Determine which parameter is being set, store the new parameter value */

-	if (XPROGParam == XPRG_PARAM_NVMBASE)

-	  XPROG_Param_NVMBase = Endpoint_Read_DWord_BE();

-	else if (XPROGParam == XPRG_PARAM_EEPPAGESIZE)

-	  XPROG_Param_EEPageSize = Endpoint_Read_Word_BE();

-	else

-	  ReturnStatus = XPRG_ERR_FAILED;

-	

-	Endpoint_ClearOUT();

-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);

-		  

-	Endpoint_Write_Byte(CMD_XPROG);

-	Endpoint_Write_Byte(XPRG_CMD_SET_PARAM);

-	Endpoint_Write_Byte(ReturnStatus);

-	Endpoint_ClearIN();

-}

-

-#endif