Spell check library source code files.

33 files changed, 58 insertions, 58 deletions

diff --git a/LUFA/CodeTemplates/DriverStubs/Dataflash.h b/LUFA/CodeTemplates/DriverStubs/Dataflash.h
index 1e451b13a..372d2f2a3 100644
--- a/LUFA/CodeTemplates/DriverStubs/Dataflash.h
+++ b/LUFA/CodeTemplates/DriverStubs/Dataflash.h
@@ -79,7 +79,7 @@
 			#define DATAFLASH_PAGES                      // TODO: Replace with the total number of pages inside one of the Dataflash ICs
 
 		/* Inline Functions: */
-			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Common/Attributes.h b/LUFA/Common/Attributes.h
index 53cfb6df1..bb0741729 100644
--- a/LUFA/Common/Attributes.h
+++ b/LUFA/Common/Attributes.h
@@ -42,7 +42,7 @@
  *  \brief GCC special function/variable attribute macros.
  *
  *  This module contains macros for applying GCC specific attributes to functions and variables to control various
- *  optimiser and code generation features of the compiler. Attributes may be placed in the function prototype
+ *  optimizer and code generation features of the compiler. Attributes may be placed in the function prototype
  *  or variable declaration in any order, and multiple attributes can be specified for a single item via a space
  *  separated list.
  *
@@ -85,13 +85,13 @@
 				 */
 				#define ATTR_NAKED                  __attribute__ ((naked))
 
-				/** Prevents the compiler from considering a specified function for inlining. When applied, the given
-				 *  function will not be inlined under any circumstances.
+				/** Prevents the compiler from considering a specified function for in-lining. When applied, the given
+				 *  function will not be in-lined under any circumstances.
 				 */
 				#define ATTR_NO_INLINE              __attribute__ ((noinline))
 
 				/** Forces the compiler to inline the specified function. When applied, the given function will be
-				 *  inlined under all circumstances.
+				 *  in-lined under all circumstances.
 				 */
 				#define ATTR_ALWAYS_INLINE          __attribute__ ((always_inline))
 
diff --git a/LUFA/Common/Common.h b/LUFA/Common/Common.h
index 49a2bcdf1..5635a4ea9 100644
--- a/LUFA/Common/Common.h
+++ b/LUFA/Common/Common.h
@@ -163,7 +163,7 @@
 
 			#if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__)
 				/** Defines a volatile \c NOP statement which cannot be optimized out by the compiler, and thus can always
-				 *  be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimiser
+				 *  be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimizer
 				 *  removes/reorders code to the point where break points cannot reliably be set.
 				 *
 				 *  \note This macro is not available for all architectures.
diff --git a/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h b/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h
index 9a5d98557..a1e8938d2 100644
--- a/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h
@@ -83,7 +83,7 @@
 			#define DATAFLASH_PAGES                      8192
 
 		/* Inline Functions: */
-			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h b/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h
index f1c99651a..3b5f1ed63 100644
--- a/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h
@@ -83,7 +83,7 @@
 			#define DATAFLASH_PAGES                      8192
 
 		/* Inline Functions: */
-			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h b/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h
index 1d07c9e3e..7a5feb725 100644
--- a/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h
@@ -83,7 +83,7 @@
 			#define DATAFLASH_PAGES                      8192
 
 		/* Inline Functions: */
-			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h b/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h
index 239828f84..c5be10190 100644
--- a/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h
@@ -86,7 +86,7 @@
 			#define DATAFLASH_PAGES                      8192
 
 		/* Inline Functions: */
-			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h
index 42c026906..7ecefba5a 100644
--- a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h
@@ -89,7 +89,7 @@
 			#endif
 
 		/* Inline Functions: */
-			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h
index e4fe21dd0..df74b4631 100644
--- a/LUFA/Drivers/Board/Buttons.h
+++ b/LUFA/Drivers/Board/Buttons.h
@@ -66,7 +66,7 @@
  *  application.
  *
  *  \code
- *      // Initialise the button driver before first use
+ *      // Initialize the button driver before first use
  *      Buttons_Init();
  *
  *      printf("Waiting for button press...\r\n");
@@ -131,7 +131,7 @@
 
 		/* Pseudo-Functions for Doxygen: */
 		#if defined(__DOXYGEN__)
-			/** Initialises the BUTTONS driver, so that the current button position can be read. This sets the appropriate
+			/** Initializes the BUTTONS driver, so that the current button position can be read. This sets the appropriate
 			 *  I/O pins to an inputs with pull-ups enabled.
 			 *
 			 *  This must be called before any Button driver functions are used.
diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h
index 9d68739af..99679808b 100644
--- a/LUFA/Drivers/Board/Dataflash.h
+++ b/LUFA/Drivers/Board/Dataflash.h
@@ -66,7 +66,7 @@
  *  application.
  *
  *  \code
- *      // Initialise the SPI and board Dataflash drivers before first use
+ *      // Initialize the SPI and board Dataflash drivers before first use
  *      SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
  *               SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
  *      Dataflash_Init();
@@ -146,7 +146,7 @@
 			#define DATAFLASH_CHIP_MASK(index)      __GET_DATAFLASH_MASK(index)
 
 		/* Inline Functions: */
-			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *
 			 *  \note The microcontroller's SPI driver must be initialized before any of the dataflash commands are used.
 			 */
diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h
index 35b989dec..c517a752b 100644
--- a/LUFA/Drivers/Board/Joystick.h
+++ b/LUFA/Drivers/Board/Joystick.h
@@ -65,7 +65,7 @@
  *  application.
  *
  *  \code
- *      // Initialise the board Joystick driver before first use
+ *      // Initialize the board Joystick driver before first use
  *      Joystick_Init();
  *
  *      printf("Waiting for joystick movement...\r\n");
@@ -119,7 +119,7 @@
 
 		/* Pseudo-Functions for Doxygen: */
 		#if defined(__DOXYGEN__)
-			/** Initialises the joystick driver so that the joystick position can be read. This sets the appropriate
+			/** Initializes the joystick driver so that the joystick position can be read. This sets the appropriate
 			 *  I/O pins to inputs with their pull-ups enabled.
 			 */
 			static inline void Joystick_Init(void);
diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index ac7716b43..100f85214 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -74,7 +74,7 @@
  *  application.
  *
  *  \code
- *      // Initialise the board LED driver before first use
+ *      // Initialize the board LED driver before first use
  *      LEDs_Init();
  *
  *      // Turn on each of the four LEDs in turn
@@ -187,7 +187,7 @@
 
 	/* Pseudo-Functions for Doxygen: */
 	#if defined(__DOXYGEN__)
-		/** Initialises the board LED driver so that the LEDs can be controlled. This sets the appropriate port
+		/** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port
 		 *  I/O pins as outputs, and sets the LEDs to default to off.
 		 */
 		static inline void LEDs_Init(void);
diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h
index e9f310e53..b41c76290 100644
--- a/LUFA/Drivers/Board/Temperature.h
+++ b/LUFA/Drivers/Board/Temperature.h
@@ -53,7 +53,7 @@
  *  application.
  *
  *  \code
- *      // Initialise the ADC and board temperature sensor drivers before first use
+ *      // Initialize the ADC and board temperature sensor drivers before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128);
  *      Temperature_Init();
  *
@@ -102,7 +102,7 @@
 			#define TEMP_MAX_TEMP          ((TEMP_TABLE_SIZE - 1) + TEMP_TABLE_OFFSET_DEGREES)
 
 		/* Inline Functions: */
-			/** Initialises the temperature sensor driver, including setting up the appropriate ADC channel.
+			/** Initializes the temperature sensor driver, including setting up the appropriate ADC channel.
 			 *  This must be called before any other temperature sensor routines.
 			 *
 			 *  \pre The ADC itself (not the ADC channel) must be configured separately before calling the
diff --git a/LUFA/Drivers/Misc/RingBuffer.h b/LUFA/Drivers/Misc/RingBuffer.h
index 504029165..023cc25c4 100644
--- a/LUFA/Drivers/Misc/RingBuffer.h
+++ b/LUFA/Drivers/Misc/RingBuffer.h
@@ -66,7 +66,7 @@
  *      RingBuffer_t Buffer;

  *      uint8_t      BufferData[128];

  *

- *      // Initialise the buffer with the created storage array

+ *      // Initialize the buffer with the created storage array

  *      RingBuffer_InitBuffer(&Buffer, BufferData, sizeof(BufferData));

  *

  *      // Insert some data into the buffer

diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
index 99f70d14b..7a02c613a 100644
--- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
@@ -53,7 +53,7 @@
  *  application.
  *
  *  \code
- *      // Initialise the ADC driver before first use
+ *      // Initialize the ADC driver before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
  *
  *      // Must setup the ADC channel to read beforehand
@@ -411,7 +411,7 @@
 				return ADC_GetResult();
 			}
 
-			/** Initialises the ADC, ready for conversions. This must be called before any other ADC operations.
+			/** Initializes the ADC, ready for conversions. This must be called before any other ADC operations.
 			 *  The "mode" parameter should be a mask comprised of a conversion mode (free running or single) and
 			 *  prescaler masks.
 			 *
diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
index d800fca1a..634c54480 100644
--- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
@@ -53,7 +53,7 @@
  *  application.
  *
  *  \code
- *      // Initialise the SPI driver before first use
+ *      // Initialize the SPI driver before first use
  *      SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
  *               SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
  *
@@ -159,7 +159,7 @@
 			//@}
 			
 		/* Inline Functions: */
-			/** Initialises the SPI subsystem, ready for transfers. Must be called before calling any other
+			/** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
 			 *  SPI routines.
 			 *
 			 *  \param[in] SPIOptions  SPI Options, a mask consisting of one of each of the \c SPI_SPEED_*,
diff --git a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
index bb9ba856e..7f519d3ba 100644
--- a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
@@ -51,7 +51,7 @@
  *  application.
  *
  *  \code
- *      // Initialise the serial USART driver before first use, with 9600 baud (and no double-speed mode)
+ *      // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode)
  *      Serial_Init(9600, false);
  *
  *      // Send a string through the USART
diff --git a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
index feac8a858..d0c78bc8d 100644
--- a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
@@ -52,7 +52,7 @@
  *
  *  <b>Low Level API Example:</b>
  *  \code
- *      // Initialise the TWI driver before first use
+ *      // Initialize the TWI driver before first use
  *      TWI_Init(TWI_BIT_PRESCALE_1, 10);
  *
  *      // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
@@ -91,7 +91,7 @@
  * 
  *  <b>High Level API Example:</b>
  *  \code
- *      // Initialise the TWI driver before first use
+ *      // Initialize the TWI driver before first use
  *      TWI_Init(TWI_BIT_PRESCALE_1, 10);
  *
  *      // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
@@ -171,7 +171,7 @@
 			/** Enum for the possible return codes of the TWI transfer start routine and other dependant TWI functions. */
 			enum TWI_ErrorCodes_t
 			{
-				TWI_ERROR_NoError              = 0, /**< Indicates that the command completed sucessfully. */
+				TWI_ERROR_NoError              = 0, /**< Indicates that the command completed successfully. */
 				TWI_ERROR_BusFault             = 1, /**< A TWI bus fault occurred while attempting to capture the bus. */
 				TWI_ERROR_BusCaptureTimeout    = 2, /**< A timeout occurred whilst waiting for the bus to be ready. */
 				TWI_ERROR_SlaveResponseTimeout = 3, /**< No ACK received at the nominated slave address within the timeout period. */
@@ -180,7 +180,7 @@
 			};
 	
 		/* Inline Functions: */
-			/** Initialises the TWI hardware into master mode, ready for data transmission and reception. This must be
+			/** Initializes the TWI hardware into master mode, ready for data transmission and reception. This must be
 			 *  before any other TWI operations.
 			 *
 			 *  The generated SCL frequency will be according to the formula <pre>F_CPU / (16 + 2 * BitLength + 4 ^ Prescale)</pre>.
diff --git a/LUFA/Drivers/USB/Class/Common/HID.h b/LUFA/Drivers/USB/Class/Common/HID.h
index f02e709d8..a860b6569 100644
--- a/LUFA/Drivers/USB/Class/Common/HID.h
+++ b/LUFA/Drivers/USB/Class/Common/HID.h
@@ -102,7 +102,7 @@
 		#define HID_KEYBOARD_LED_KATANA                           (1 << 3)
 		//@}
 
-		/** \name Keyboard Standard Report Key Scancodes */
+		/** \name Keyboard Standard Report Key Scan-codes */
 		//@{	
 		#define HID_KEYBOARD_SC_ERROR_ROLLOVER                    0x01
 		#define HID_KEYBOARD_SC_POST_FAIL                         0x02
@@ -483,11 +483,11 @@
 
 		/** \hideinitializer
 		 *  A list of HID report item array elements that describe a typical Vendor Defined byte array HID report descriptor,
-		 *  used for transporting abitrary data between the USB host and device via HID reports. The resulting report should be
+		 *  used for transporting arbitrary data between the USB host and device via HID reports. The resulting report should be
 		 *  a uint8_t byte array of the specified length in both Device to Host (IN) and Host to Device (OUT) directions.
 		 *
 		 *  \param[in] VendorPageNum    Vendor Defined HID Usage Page index, ranging from 0x00 to 0xFF.
-		 *  \param[in] CollectionUsage  Vendor Usage for the encompasing report IN and OUT collection, ranging from 0x00 to 0xFF.
+		 *  \param[in] CollectionUsage  Vendor Usage for the encompassing report IN and OUT collection, ranging from 0x00 to 0xFF.
 		 *  \param[in] DataINUsage      Vendor Usage for the IN report data, ranging from 0x00 to 0xFF.
 		 *  \param[in] DataOUTUsage     Vendor Usage for the OUT report data, ranging from 0x00 to 0xFF.   
 		 *  \param[in] NumBytes         Length of the data IN and OUT reports.
diff --git a/LUFA/Drivers/USB/Class/Common/HIDParser.h b/LUFA/Drivers/USB/Class/Common/HIDParser.h
index c972665ac..e0df87e79 100644
--- a/LUFA/Drivers/USB/Class/Common/HIDParser.h
+++ b/LUFA/Drivers/USB/Class/Common/HIDParser.h
@@ -54,11 +54,11 @@
  *  of data exchanged between a HID device and a host, including both the physical encoding of each item
  *  (such as a button, key press or joystick axis) in the sent and received data packets - known as "reports" -
  *  as well as other information about each item such as the usages, data range, physical location and other
- *  characterstics. In this way a HID device can retain a high degree of flexibility in its capabilities, as it
- *  is not forced to comply with a given report layout or featureset.
+ *  characteristics. In this way a HID device can retain a high degree of flexibility in its capabilities, as it
+ *  is not forced to comply with a given report layout or feature-set.
  *
  *  This module also contains routines for the processing of data in an actual HID report, using the parsed report
- *  descritor data as a guide for the encoding.
+ *  descriptor data as a guide for the encoding.
  *
  *  @{
  */
diff --git a/LUFA/Drivers/USB/Class/Host/RNDIS.h b/LUFA/Drivers/USB/Class/Host/RNDIS.h
index 41b235bdf..1d238bd8b 100644
--- a/LUFA/Drivers/USB/Class/Host/RNDIS.h
+++ b/LUFA/Drivers/USB/Class/Host/RNDIS.h
@@ -155,7 +155,7 @@
 			 */
 			uint8_t RNDIS_Host_SendKeepAlive(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** Initialises the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been
+			/** Initializes the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been
 			 *  configured via the call to \ref RNDIS_Host_ConfigurePipes().
 			 *
 			 *  \param[in,out] RNDISInterfaceInfo  Pointer to a structure containing an RNDIS Class host configuration and state.
diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
index 1727da0d8..bdbe31c33 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
@@ -45,7 +45,7 @@
 
 /** \ingroup Group_EndpointPrimitiveRW
  *  \defgroup Group_EndpointPrimitiveRW_AVR8 Read/Write of Primitive Data Types (AVR8)
- *  \brief Endpoint primative read/write definitions for the Atmel AVR8 architecture.
+ *  \brief Endpoint primitive read/write definitions for the Atmel AVR8 architecture.
  *
  *  Functions, macros, variables, enums and types related to data reading and writing of primitive data types
  *  from and to endpoints.
@@ -182,7 +182,7 @@
 				#define ENDPOINT_CONTROLEP_DEFAULT_SIZE     8
 			#endif
 
-			/** Retrives the maximum bank size in bytes of a given endpoint.
+			/** Retrieves the maximum bank size in bytes of a given endpoint.
 			 *
 			 *  \note This macro will only work correctly on endpoint indexes that are compile-time constants
 			 *        defined by the preprocessor.
diff --git a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h
index 2c2b5068e..6854128d3 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h
@@ -330,7 +330,7 @@
 			 */
 			uint8_t USB_Host_ClearPipeStall(const uint8_t EndpointIndex);
 
-			/** Selects a given alternative setting for the specfied interface, via a SET INTERFACE standard request to
+			/** Selects a given alternative setting for the specified interface, via a SET INTERFACE standard request to
 			 *  the attached device.
 			 *
 			 *  \note After this routine returns, the control pipe will be selected.
diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
index 8022a812a..c7e21f73a 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
@@ -45,7 +45,7 @@
 
 /** \ingroup Group_PipePrimitiveRW
  *  \defgroup Group_PipePrimitiveRW_AVR8 Read/Write of Primitive Data Types (AVR8)
- *  \brief Pipe primative data read/write definitions for the Atmel AVR8 architecture.
+ *  \brief Pipe primitive data read/write definitions for the Atmel AVR8 architecture.
  *
  *  Functions, macros, variables, enums and types related to data reading and writing of primitive data types
  *  from and to pipes.
diff --git a/LUFA/Drivers/USB/Core/Endpoint.h b/LUFA/Drivers/USB/Core/Endpoint.h
index 10b2b9c93..bbd75467f 100644
--- a/LUFA/Drivers/USB/Core/Endpoint.h
+++ b/LUFA/Drivers/USB/Core/Endpoint.h
@@ -45,7 +45,7 @@
 

 /** \ingroup Group_EndpointRW

  *  \defgroup Group_EndpointPrimitiveRW Read/Write of Primitive Data Types

- *  \brief Endpoint data primative read/write definitions.

+ *  \brief Endpoint data primitive read/write definitions.

  *

  *  Functions, macros, variables, enums and types related to data reading and writing of primitive data types

  *  from and to endpoints.

diff --git a/LUFA/Drivers/USB/Core/Pipe.h b/LUFA/Drivers/USB/Core/Pipe.h
index 5354095a1..8d0864754 100644
--- a/LUFA/Drivers/USB/Core/Pipe.h
+++ b/LUFA/Drivers/USB/Core/Pipe.h
@@ -45,7 +45,7 @@
 

 /** \ingroup Group_PipeRW

  *  \defgroup Group_PipePrimitiveRW Read/Write of Primitive Data Types

- *  \brief Pipe data primative read/write definitions.

+ *  \brief Pipe data primitive read/write definitions.

  *

  *  Functions, macros, variables, enums and types related to data reading and writing of primitive data types

  *  from and to pipes.

diff --git a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h
index 4f31a0d86..1c9f6ccf1 100644
--- a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h
+++ b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h
@@ -45,7 +45,7 @@
 

 /** \ingroup Group_EndpointPrimitiveRW

  *  \defgroup Group_EndpointPrimitiveRW_UC3 Read/Write of Primitive Data Types (UC3)

- *  \brief Endpoint primative read/write definitions for the Atmel AVR32 UC3 architecture.

+ *  \brief Endpoint primitive read/write definitions for the Atmel AVR32 UC3 architecture.

  *

  *  Functions, macros, variables, enums and types related to data reading and writing of primitive data types

  *  from and to endpoints.

@@ -198,7 +198,7 @@
 				#define ENDPOINT_CONTROLEP_DEFAULT_SIZE     8

 			#endif

 

-			/** Retrives the maximum bank size in bytes of a given endpoint.

+			/** Retrieves the maximum bank size in bytes of a given endpoint.

 			 *

 			 *  \note This macro will only work correctly on endpoint indexes that are compile-time constants

 			 *        defined by the preprocessor.

diff --git a/LUFA/Drivers/USB/Core/UC3/Host_UC3.h b/LUFA/Drivers/USB/Core/UC3/Host_UC3.h
index 65b8011c9..7fd46a313 100644
--- a/LUFA/Drivers/USB/Core/UC3/Host_UC3.h
+++ b/LUFA/Drivers/USB/Core/UC3/Host_UC3.h
@@ -331,7 +331,7 @@
 			 */

 			uint8_t USB_Host_ClearPipeStall(const uint8_t EndpointIndex);

 

-			/** Selects a given alternative setting for the specfied interface, via a SET INTERFACE standard request to

+			/** Selects a given alternative setting for the specified interface, via a SET INTERFACE standard request to

 			 *  the attached device.

 			 *

 			 *  \note After this routine returns, the control pipe will be selected.

diff --git a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h
index bda3e8e2c..b6f015c11 100644
--- a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h
+++ b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h
@@ -45,7 +45,7 @@
 

 /** \ingroup Group_PipePrimitiveRW

  *  \defgroup Group_PipePrimitiveRW_UC3 Read/Write of Primitive Data Types (UC3)

- *  \brief Pipe primative data read/write definitions for the Atmel AVR32 UC3 architecture.

+ *  \brief Pipe primitive data read/write definitions for the Atmel AVR32 UC3 architecture.

  *

  *  Functions, macros, variables, enums and types related to data reading and writing of primitive data types

  *  from and to pipes.

diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 777ac0db2..27a25e75f 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -55,8 +55,8 @@
   *   - Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus)
   *   - Internal restructuring for eventual multiple architecture ports
   *   - Added AVR32 UC3 architecture port (currently incomplete/experimental)
-  *   - Added new architecture independant functions to enable, disable, save and restore the Global Interrupt Enable flags
-  *   - Added new RNDIS Device Classs Driver packet send and receive functions
+  *   - Added new architecture independent functions to enable, disable, save and restore the Global Interrupt Enable flags
+  *   - Added new RNDIS Device Class Driver packet send and receive functions
   *  - Library Applications:
   *   - Added ability to write protect Mass Storage disk write operations from the host OS
   *   - Added new MIDIToneGenerator project
@@ -97,7 +97,7 @@
   *     a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures
   *   - Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of
   *     a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures
-  *   - Seperated out board drivers by architecture in the library internals for better organisation
+  *   - Separated out board drivers by architecture in the library internals for better organisation
   *  - Library Applications:
   *   - Changed the XPLAINBridge software UART to use the regular timer CTC mode instead of the alternative CTC mode
   *     via the Input Capture register, to reduce user confusion
@@ -108,7 +108,7 @@
   *   - Changed TempDataLogger project's DS1307 driver to simplify the function interface and prevent a possible race condition
   *   - Changed AVRISP-MKII project to use the Watchdog interrupt for command timeouts, to reduce CPU usage and free timer 0
   *     for other uses
-  *   - Updated the software USART code in the XPLAIN Bridge application so that the incomming bits are sampled at their mid-point
+  *   - Updated the software USART code in the XPLAIN Bridge application so that the incoming bits are sampled at their mid-point
   *     instead of starting point, to give maximum reliability (thanks to Anton Staaf)
   *
   *  <b>Fixed:</b>
@@ -123,7 +123,7 @@
   *   - Fixed several functions in the Host mode Still Image Class driver returning an error code from the incorrect
   *     error code enum (thanks to Daniel Seibert)
   *   - Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used
-  *   - Fixed incorect BUTTONS_BUTTON1 definition for the Minimus board
+  *   - Fixed incorrect BUTTONS_BUTTON1 definition for the Minimus board
   *   - Fixed Still Image Host class driver exiting the descriptor search routine prematurely if the data pipes (but not event pipe)
   *     is found
   *   - Fixed missing call to Pipe_SetInfiniteINRequests() in the Pipe_ConfigurePipe() routine
@@ -168,7 +168,7 @@
   *    - Added board hardware driver support for the Minimus board (thanks to the PSGroove team)
   *    - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management
   *      tasks for each driver is called
-  *    - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda)
+  *    - Added standard keyboard HID report scan-code defines (thanks to Laszlo Monda)
   *    - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions
   *  - Library Applications:
   *    - Added default test tone generation mode to the Device mode AudioInput demos
diff --git a/LUFA/ManPages/CompileTimeTokens.txt b/LUFA/ManPages/CompileTimeTokens.txt
index 660cdcfb2..5e9e0990e 100644
--- a/LUFA/ManPages/CompileTimeTokens.txt
+++ b/LUFA/ManPages/CompileTimeTokens.txt
@@ -83,8 +83,8 @@
  *
  *  <b>ORDERED_EP_CONFIG</b> - (\ref Group_EndpointManagement , \ref Group_PipeManagement)  - <i>AVR8 Only</i> \n
  *  The USB AVRs do not allow for Endpoints and Pipes to be configured out of order; they <i>must</i> be configured in an ascending order to
- *  prevent data corruption issues. However, by default LUFA employs a workaround to allow for unordered Endpoint/Pipe initialisation. This compile
- *  time token may be used to restrict the intialisation order to ascending indexes only in exchange for a smaller compiled binary size.
+ *  prevent data corruption issues. However, by default LUFA employs a workaround to allow for unordered Endpoint/Pipe initialization. This compile
+ *  time token may be used to restrict the initialization order to ascending indexes only in exchange for a smaller compiled binary size.
  *
  *  <b>USE_STATIC_OPTIONS</b>=<i>x</i> - (\ref Group_USBManagement) - <i>All Architectures</i> \n
  *  By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad
diff --git a/LUFA/ManPages/FutureChanges.txt b/LUFA/ManPages/FutureChanges.txt
index 47815ea44..4016bf52b 100644
--- a/LUFA/ManPages/FutureChanges.txt
+++ b/LUFA/ManPages/FutureChanges.txt
@@ -19,7 +19,7 @@
   *      -# Re-add interrupt Pipe/Endpoint support
   *      -# Add makefile includes to reduce boilerplate in user makefiles
   *      -# Update stream APIs to use DMA transfers on supported architectures
-  *      -# Pull out third party libraries into a seperate folder and reference them as required
+  *      -# Pull out third party libraries into a separate folder and reference them as required
   *      -# Add a LUFA_YIELD macro for integration into a third-party RTOS
   *      -# Abstract out Mass Storage byte send/receive to prevent low level API use in projects
   *  - Documentation/Support
diff --git a/LUFA/ManPages/MigrationInformation.txt b/LUFA/ManPages/MigrationInformation.txt
index 83eb6e6a4..86bf22803 100644
--- a/LUFA/ManPages/MigrationInformation.txt
+++ b/LUFA/ManPages/MigrationInformation.txt
@@ -37,7 +37,7 @@
  *
  *  <b>USB Core</b>
  *    - By default, unordered Endpoint and Pipe configuration is now allowed once again, via the previous workaround of
- *      reconfiguring all Endpoints/Pipes in order each time a new Endpoint/Pipe is created. To minimise the compiled program
+ *      reconfiguring all Endpoints/Pipes in order each time a new Endpoint/Pipe is created. To minimize the compiled program
  *      size, the new \c ORDERED_EP_CONFIG compile time option may be defined in the project makefile to restrict the ordering
  *      in exchange for a smaller compiled binary size.
  *    - The previous F_CLOCK symbol, required in the project makefile, has been renamed to F_USB. This is due to the previous name