Changed per-device controller preprocessor checks over to per-device series for better device control.

Fixed error in Endpoint.c using HSOFI rather than SOFI for counting elapsed milliseconds.

11 files changed, 56 insertions, 51 deletions

diff --git a/LUFA/ChangeLog.txt b/LUFA/ChangeLog.txt
index 119fb4322..17f652e20 100644
--- a/LUFA/ChangeLog.txt
+++ b/LUFA/ChangeLog.txt
@@ -16,6 +16,8 @@
   *  - MIDI device demo no longer blocks if a note change event is sent while the endpoint is not ready

   *  - Fixes to MassStorageHost for better device compatibility (increase command timeout, change MassStore_WaitForDataReceived()

   *    to only unfreeze and check one data pipe at a time)

+  *  - Internal per-device preprocessing conditions changed to per-device series rather than per controller group for finer-grain

+  *    internal control

   *

   *

   *  \section Sec_ChangeLog090605 Version 090605

diff --git a/LUFA/Drivers/USB/HighLevel/Events.h b/LUFA/Drivers/USB/HighLevel/Events.h
index 80ace8720..7f369bc63 100644
--- a/LUFA/Drivers/USB/HighLevel/Events.h
+++ b/LUFA/Drivers/USB/HighLevel/Events.h
@@ -275,7 +275,7 @@
 			#if defined(INCLUDE_FROM_EVENTS_C)

 				void USB_Event_Stub(void) ATTR_CONST;

 

-				#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)

+				#if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))

 					void EVENT_USB_VBUSChange(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

 					void EVENT_USB_VBUSConnect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

 					void EVENT_USB_VBUSDisconnect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

diff --git a/LUFA/Drivers/USB/HighLevel/USBInterrupt.c b/LUFA/Drivers/USB/HighLevel/USBInterrupt.c
index 0b9d08223..43bc53220 100644
--- a/LUFA/Drivers/USB/HighLevel/USBInterrupt.c
+++ b/LUFA/Drivers/USB/HighLevel/USBInterrupt.c
@@ -32,9 +32,9 @@
 

 void USB_INT_DisableAllInterrupts(void)

 {

-	#if defined(USB_FULL_CONTROLLER)

+	#if defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)

 	USBCON &= ~((1 << VBUSTE) | (1 << IDTE));				

-	#elif defined(USB_MODIFIED_FULL_CONTROLLER)

+	#elif defined(USB_SERIES_4_AVR)

 	USBCON &= ~(1 << VBUSTE);					

 	#endif

 	

@@ -50,7 +50,7 @@ void USB_INT_DisableAllInterrupts(void)
 

 void USB_INT_ClearAllInterrupts(void)

 {

-	#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)

+	#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)

 	USBINT  = 0;

 	#endif

 	

@@ -67,7 +67,7 @@ void USB_INT_ClearAllInterrupts(void)
 ISR(USB_GEN_vect, ISR_BLOCK)

 {

 	#if defined(USB_CAN_BE_DEVICE)

-	#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)

+	#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)

 	if (USB_INT_HasOccurred(USB_INT_VBUS) && USB_INT_IsEnabled(USB_INT_VBUS))

 	{

 		USB_INT_Clear(USB_INT_VBUS);

@@ -121,7 +121,7 @@ ISR(USB_GEN_vect, ISR_BLOCK)
 

 		EVENT_USB_Suspend();

 

-		#if defined(USB_LIMITED_CONTROLLER) && !defined(NO_LIMITED_CONTROLLER_CONNECT)

+		#if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT)

 		if (USB_IsConnected)

 		{

 			USB_IsConnected = false;

@@ -145,7 +145,7 @@ ISR(USB_GEN_vect, ISR_BLOCK)
 		USB_INT_Disable(USB_INT_WAKEUP);

 		USB_INT_Enable(USB_INT_SUSPEND);

 		

-		#if defined(USB_LIMITED_CONTROLLER) && !defined(NO_LIMITED_CONTROLLER_CONNECT)

+		#if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT)

 		if (!(USB_IsConnected))

 		{

 			USB_IsConnected = true;

diff --git a/LUFA/Drivers/USB/HighLevel/USBMode.h b/LUFA/Drivers/USB/HighLevel/USBMode.h
index 138af9ed0..471f307e7 100644
--- a/LUFA/Drivers/USB/HighLevel/USBMode.h
+++ b/LUFA/Drivers/USB/HighLevel/USBMode.h
@@ -42,11 +42,13 @@
 			#endif

 			

 			#if (defined(__AVR_AT90USB162__)  || defined(__AVR_AT90USB82__))

-				#define USB_LIMITED_CONTROLLER

+				#define USB_SERIES_2_AVR

 			#elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))

-				#define USB_MODIFIED_FULL_CONTROLLER

-			#else

-				#define USB_FULL_CONTROLLER

+				#define USB_SERIES_4_AVR

+			#elif (defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))

+				#define USB_SERIES_6_AVR

+			#elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__))

+				#define USB_SERIES_7_AVR

 			#endif			

 

 			#if (!defined(USB_DEVICE_ONLY) && !defined(USB_HOST_ONLY))

@@ -61,14 +63,12 @@
 				#define USB_CurrentMode USB_MODE_DEVICE

 			#endif

 			

-			#if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY))

+			#if (!(defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__)) && defined(USB_HOST_ONLY))

+				#error USB_HOST_ONLY is not available for the currently selected USB AVR model.

+			#elif (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY))

 				#error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive.

 			#endif

 

-			#if (defined(USE_RAM_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS))

-				#error USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive.

-			#endif

-

 			#if defined(USE_STATIC_OPTIONS)

 				#define USB_Options USE_STATIC_OPTIONS

 			#endif

diff --git a/LUFA/Drivers/USB/LowLevel/DevChapter9.c b/LUFA/Drivers/USB/LowLevel/DevChapter9.c
index 9bba23495..829bd13e8 100644
--- a/LUFA/Drivers/USB/LowLevel/DevChapter9.c
+++ b/LUFA/Drivers/USB/LowLevel/DevChapter9.c
@@ -179,8 +179,8 @@ static void USB_Device_GetDescriptor(void)
 	void*    DescriptorPointer;

 	uint16_t DescriptorSize;

 	

-	if ((DescriptorSize = CALLBACK_USB_GetDescriptor(USB_ControlRequest.wValue,

-	                                                 USB_ControlRequest.wIndex, &DescriptorPointer)) == NO_DESCRIPTOR)

+	if ((DescriptorSize = CALLBACK_USB_GetDescriptor(USB_ControlRequest.wValue, USB_ControlRequest.wIndex,

+	                                                 &DescriptorPointer)) == NO_DESCRIPTOR)

 	{

 		return;

 	}

@@ -209,7 +209,7 @@ static void USB_Device_GetDescriptor(void)
 		while (USB_ControlRequest.wLength && (Endpoint_BytesInEndpoint() < USB_ControlEndpointSize))

 		{

 			#if defined (USE_EEPROM_DESCRIPTORS)

-			Endpoint_Write_Byte(eeprom_read_byte(DescriptorPointer++));			

+			Endpoint_Write_Byte(eeprom_read_byte(DescriptorPointer++));		

 			#else

 			Endpoint_Write_Byte(pgm_read_byte(DescriptorPointer++));

 			#endif

diff --git a/LUFA/Drivers/USB/LowLevel/Device.h b/LUFA/Drivers/USB/LowLevel/Device.h
index 31d612c0a..6661b9e0c 100644
--- a/LUFA/Drivers/USB/LowLevel/Device.h
+++ b/LUFA/Drivers/USB/LowLevel/Device.h
@@ -48,9 +48,14 @@
 		#include "../HighLevel/StdDescriptors.h"

 		#include "Endpoint.h"

 

+	/* Preprocessor Checks: */

+		#if (defined(USE_RAM_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS))

+			#error USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive.

+		#endif

+			

 	/* Public Interface - May be used in end-application: */

 		/* Macros: */

-			#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER) || defined(__DOXYGEN__)

+			#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)

 				/** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the

 				 *  USB interface should be initialized in low speed (1.5Mb/s) mode.

 				 *

diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.c b/LUFA/Drivers/USB/LowLevel/Endpoint.c
index fd97b75c1..dca755497 100644
--- a/LUFA/Drivers/USB/LowLevel/Endpoint.c
+++ b/LUFA/Drivers/USB/LowLevel/Endpoint.c
@@ -98,9 +98,9 @@ uint8_t Endpoint_WaitUntilReady(void)
 		else if (Endpoint_IsStalled())

 		  return ENDPOINT_READYWAIT_EndpointStalled;

 			  

-		if (USB_INT_HasOccurred(USB_INT_HSOFI))

+		if (USB_INT_HasOccurred(USB_INT_SOFI))

 		{

-			USB_INT_Clear(USB_INT_HSOFI);

+			USB_INT_Clear(USB_INT_SOFI);

 

 			if (!(TimeoutMSRem--))

 			  return ENDPOINT_READYWAIT_Timeout;

diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.h b/LUFA/Drivers/USB/LowLevel/Endpoint.h
index 323559320..2c7a064e5 100644
--- a/LUFA/Drivers/USB/LowLevel/Endpoint.h
+++ b/LUFA/Drivers/USB/LowLevel/Endpoint.h
@@ -128,7 +128,7 @@
 			#define ENDPOINT_DOUBLEBANK_SUPPORTED(n)      _ENDPOINT_GET_DOUBLEBANK(n)

 

 			#if !defined(CONTROL_ONLY_DEVICE)

-				#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER) || defined(__DOXYGEN__)

+				#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)

 					/** Total number of endpoints (including the default control endpoint at address 0) which may

 					 *  be used in the device. Different USB AVR models support different amounts of endpoints,

 					 *  this value reflects the maximum number of endpoints for the currently selected AVR model.

@@ -316,7 +316,7 @@
 				 */

 				static inline uint8_t Endpoint_GetEndpointDirection(void);

 			#else

-				#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER) || defined(__DOXYGEN__)

+				#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)

 					#define Endpoint_BytesInEndpoint()        UEBCX

 				#else

 					#define Endpoint_BytesInEndpoint()        UEBCLX

@@ -933,7 +933,7 @@
 			#define _ENDPOINT_GET_DOUBLEBANK2(details)     _ENDPOINT_GET_DOUBLEBANK3(details)

 			#define _ENDPOINT_GET_DOUBLEBANK3(maxsize, db) db

 			

-			#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)

+			#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)

 				#define ENDPOINT_DETAILS_EP0               64,  true

 				#define ENDPOINT_DETAILS_EP1               256, true

 				#define ENDPOINT_DETAILS_EP2               64,  true

diff --git a/LUFA/Drivers/USB/LowLevel/LowLevel.c b/LUFA/Drivers/USB/LowLevel/LowLevel.c
index 16a50ac8f..865a57d57 100644
--- a/LUFA/Drivers/USB/LowLevel/LowLevel.c
+++ b/LUFA/Drivers/USB/LowLevel/LowLevel.c
@@ -68,7 +68,7 @@ void USB_Init(
 	USB_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE;

 	#endif

 	

-	#if defined(USB_DEVICE_ONLY) && defined(USB_FULL_CONTROLLER)

+	#if defined(USB_DEVICE_ONLY) && (defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))

 	UHWCON |= (1 << UIMOD);

 	#elif defined(USB_HOST_ONLY)

 	UHWCON &= ~(1 << UIMOD);

@@ -99,7 +99,7 @@ void USB_Init(
 	

 	USB_ResetInterface();

 

-	#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)

+	#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)

 	USB_OTGPAD_On();

 	#endif

 

@@ -136,7 +136,7 @@ void USB_ShutDown(void)
 	USB_Interface_Disable();

 	USB_PLL_Off();

 	

-	#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)

+	#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)

 	USB_OTGPAD_Off();

 	#endif

 

@@ -165,7 +165,7 @@ void USB_ResetInterface(void)
 	

 	if (!(USB_Options & USB_OPT_MANUAL_PLL))

 	{

-		#if defined(USB_MODIFIED_FULL_CONTROLLER)

+		#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)

 		PLLFRQ = ((1 << PLLUSB) | (1 << PDIV3) | (1 << PDIV1));

 		#endif

 

@@ -189,7 +189,7 @@ void USB_ResetInterface(void)
 	

 	USB_CLK_Unfreeze();

 

-	#if (defined(USB_CAN_BE_DEVICE) && (defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)))

+	#if (defined(USB_CAN_BE_DEVICE) && (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)))

 	if (USB_CurrentMode == USB_MODE_DEVICE)

 	{

 		if (USB_Options & USB_DEVICE_OPT_LOWSPEED)

diff --git a/LUFA/Drivers/USB/LowLevel/LowLevel.h b/LUFA/Drivers/USB/LowLevel/LowLevel.h
index 41b0ff5f6..f22a751f0 100644
--- a/LUFA/Drivers/USB/LowLevel/LowLevel.h
+++ b/LUFA/Drivers/USB/LowLevel/LowLevel.h
@@ -77,22 +77,22 @@
 		#if (F_CLOCK == 8000000)

 			#if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__))

 				#define USB_PLL_PSC                0

-			#elif (defined(__AVR_AT90USB646__)  || defined(__AVR_AT90USB647__)  || \

-			       defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || \

-				   defined(__AVR_ATmega32U6__))

-				#define USB_PLL_PSC                ((1 << PLLP1) | (1 << PLLP0))

 			#elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))

 				#define USB_PLL_PSC                0

+			#elif (defined(__AVR_AT90USB646__)  || defined(__AVR_AT90USB1286__) || defined(__AVR_ATmega32U6__))

+				#define USB_PLL_PSC                ((1 << PLLP1) | (1 << PLLP0))

+			#elif (defined(__AVR_AT90USB647__)  || defined(__AVR_AT90USB1287__))

+				#define USB_PLL_PSC                ((1 << PLLP1) | (1 << PLLP0))

 			#endif

 		#elif (F_CLOCK == 16000000)

-			#if (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_ATmega32U6__))

-				#define USB_PLL_PSC                ((1 << PLLP2) | (1 << PLLP1))

-			#elif (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__))

-				#define USB_PLL_PSC                ((1 << PLLP2) | (1 << PLLP0))

-			#elif (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__))

+			#if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__))

 				#define USB_PLL_PSC                (1 << PLLP0)

 			#elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))

 				#define USB_PLL_PSC                (1 << PINDIV)

+			#elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_ATmega32U6__))

+				#define USB_PLL_PSC                ((1 << PLLP2) | (1 << PLLP1))

+			#elif (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__))

+				#define USB_PLL_PSC                ((1 << PLLP2) | (1 << PLLP0))

 			#endif

 		#endif

 		

@@ -107,11 +107,13 @@
 			 */

 			#define USB_MODE_NONE                      0

 

-			/** Mode mask for the \ref USB_CurrentMode global and the \ref USB_Init() function. This indicates that the

-			 *  USB interface is or should be initialized in the USB device mode.

-			 */

-			#define USB_MODE_DEVICE                    1

-

+			#if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)

+				/** Mode mask for the \ref USB_CurrentMode global and the \ref USB_Init() function. This indicates that the

+				 *  USB interface is or should be initialized in the USB device mode.

+				 */

+				#define USB_MODE_DEVICE                    1

+			#endif

+			

 			#if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)

 				/** Mode mask for the \ref USB_CurrentMode global and the \ref USB_Init() function. This indicates that the

 				 *  USB interface is or should be initialized in the USB host mode.

@@ -181,7 +183,7 @@
 			 */

 			#define EP_TYPE_INTERRUPT                  0x03

 

-			#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER) || defined(__DOXYGEN__)

+			#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)

 				/** Returns boolean true if the VBUS line is currently high (i.e. the USB host is supplying power),

 				 *  otherwise returns false.

 				 *

@@ -320,7 +322,7 @@
 			#define USB_PLL_Off()              MACROS{ PLLCSR   =  0;                           }MACROE

 			#define USB_PLL_IsReady()                ((PLLCSR  &   (1 << PLOCK)) ? true : false)

 

-			#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)		

+			#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)

 				#define USB_REG_On()           MACROS{ UHWCON  |=  (1 << UVREGE);               }MACROE

 				#define USB_REG_Off()          MACROS{ UHWCON  &= ~(1 << UVREGE);               }MACROE

 			#else

diff --git a/LUFA/Drivers/USB/USB.h b/LUFA/Drivers/USB/USB.h
index d0837a844..c2d9339ac 100644
--- a/LUFA/Drivers/USB/USB.h
+++ b/LUFA/Drivers/USB/USB.h
@@ -84,11 +84,7 @@
 #ifndef __USB_H__

 #define __USB_H__

 

-	/* Preprocessor Checks: */

-		#if (!(defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__)) && defined(USB_HOST_ONLY))

-			#error USB_HOST_ONLY is not available for the currently selected USB AVR model.

-		#endif

-		

+	/* Preprocessor Checks: */		

 		#if (!(defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) ||  \

 		       defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) ||  \

 			   defined(__AVR_AT90USB162__)  || defined(__AVR_AT90USB82__)  ||  \