Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.

27 files changed, 3124 insertions, 3124 deletions

diff --git a/LUFA/ManPages/AboutLUFA.txt b/LUFA/ManPages/AboutLUFA.txt
index 78900d369..cd0ed059c 100644
--- a/LUFA/ManPages/AboutLUFA.txt
+++ b/LUFA/ManPages/AboutLUFA.txt
@@ -1,20 +1,20 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/**

- *  \page Page_AboutLUFA About LUFA

- *

- *  This section of the manual contains information about the library as a whole, including its supported targets,

- *  past and planned changes, and links to other projects incorporating LUFA.

- *

- *  <b>Subsections:</b>

- *  - \subpage Page_DeviceSupport Current Device and Hardware Support

- *  - \subpage Page_Resources LUFA and USB Related Resources

- *  - \subpage Page_ChangeLog Project Changelog

- *  - \subpage Page_FutureChanges Planned Changes to the Library

- *  - \subpage Page_LUFAPoweredProjects Other Projects Using LUFA

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/**
+ *  \page Page_AboutLUFA About LUFA
+ *
+ *  This section of the manual contains information about the library as a whole, including its supported targets,
+ *  past and planned changes, and links to other projects incorporating LUFA.
+ *
+ *  <b>Subsections:</b>
+ *  - \subpage Page_DeviceSupport Current Device and Hardware Support
+ *  - \subpage Page_Resources LUFA and USB Related Resources
+ *  - \subpage Page_ChangeLog Project Changelog
+ *  - \subpage Page_FutureChanges Planned Changes to the Library
+ *  - \subpage Page_LUFAPoweredProjects Other Projects Using LUFA
+ */
  
\ No newline at end of file
diff --git a/LUFA/ManPages/AlternativeStacks.txt b/LUFA/ManPages/AlternativeStacks.txt
index 0ce9150f5..a0a7a415e 100644
--- a/LUFA/ManPages/AlternativeStacks.txt
+++ b/LUFA/ManPages/AlternativeStacks.txt
@@ -1,62 +1,62 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/**

- *  \page Page_AlternativeStacks Alternative USB AVR Stacks

- *

- *  LUFA is not the only stack available for the USB AVRs, although it is perhaps the best (see \ref Page_WhyUseLUFA).

- *  In the interests of completeness and user choice, other known USB AVR stacks are listed here.

- *

- *  \section Sec_HardwareStacks Hardware USB AVR Stacks

- *  These are the known alternative USB stacks which are designed for and run exclusively on the USB AVR series microcontrollers,

- *  which contain on-chip USB controller hardware for maximum features and speed.

- *

- *  - <b>Name:</b> Atmel USB AVR Stack (<i>Atmel Inc.</i>) \n

- *    <b>Cost:</b> Free \n

- *    <b>License:</b> Atmel Limited License (see Atmel download for details) \n

- *    <b>Website:</b> http://atmel.com/dyn/products/app_notes.asp?family_id=607#USB \n

- *    <b>Description:</b> This is the official Atmel USB AVR stack, for their 8-bit USB AVR lineup. Each series of

- *                        USB AVR is seperated into a seperate download stack, which is both AVR-GCC and IAR compatible.

- *

- *  - <b>Name:</b> Dr. Stefan Salewski's AT90USB1287 Stack (<i>Dr. Stefan Salewski</i>) \n

- *    <b>Cost:</b> Free \n

- *    <b>License:</b> GPL \n

- *    <b>Website:</b> http://www.ssalewski.de/AT90USB_firmware.html.en \n

- *    <b>Description:</b> This is a GPL'd library specifically designed for the AT90USB1287, by Dr. Stefan Salewski, a

- *                        German Physicist. It compiles for AVR-GCC and can potentially be modified to work on other USB

- *                        AVR models.

- *

- *  - <b>Name:</b> PJRC Teensy Stack (<i>Paul Stoffregen</i>) \n

- *    <b>Cost:</b> Free \n

- *    <b>License:</b> BSD \n

- *    <b>Website:</b> http://www.pjrc.com/teensy/usb_debug_only.html \n

- *    <b>Description:</b> Not so much a complete stack as a collection of USB enabled demos, this library is specifically

- *                        designed for the PJRC Teensy line of USB AVRs, and thus may need to be modified for other USB AVR

- *                        chips. These minimal code samples shows the inner workings of the USB controller, without all the 

- *                        abstraction present in most other USB AVR stacks. 

- *

- *  \section Sec_SoftwareStacks Software AVR Stacks

- *  These are the known alternative USB stacks which can run on regular AVR models, lacking dedicated hardware USB controllers

- *  via a bit-banged (emulated) version of the USB protocol. They are limited in their capabilities due to the cycles required

- *  to be dedicated to managing the USB bus, but offer a cheap way to implement USB functionality into a design.

- *

- *  - <b>Name:</b> AVR309: Software USB (<i>Atmel</i>) \n

- *    <b>Cost:</b> Free \n

- *    <b>License:</b> None Stated \n

- *    <b>Website:</b> http://www.atmel.com/dyn/Products/app_notes.asp?family_id=607 \n

- *    <b>Description:</b> Atmel's official software USB implementation, an Application Note containing work by Igor Cesko. This

- *                        is a minimal assembly-only implementation of software USB, providing HID functionality. Less compile

- *                        options than V-USB (see below).

- *

- *  - <b>Name:</b> V-USB (<i>Objective Development</i>) \n

- *    <b>Cost:</b> Free for some uses, see website for licensing \n

- *    <b>License:</b> Dual GPL2/Custom \n

- *    <b>Website:</b> http://www.obdev.at/products/vusb/index.html \n

- *    <b>Description:</b> Well regarded and complete USB 1.1 software stack for several AVR models, implementing Low Speed HID.

- *                        Used in many commercial and non-commercial designs, with user-submitted projects available for viewing

- *                        on the company's website. Uses C language code mixed with assembly for time-critical sections.

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/**
+ *  \page Page_AlternativeStacks Alternative USB AVR Stacks
+ *
+ *  LUFA is not the only stack available for the USB AVRs, although it is perhaps the best (see \ref Page_WhyUseLUFA).
+ *  In the interests of completeness and user choice, other known USB AVR stacks are listed here.
+ *
+ *  \section Sec_HardwareStacks Hardware USB AVR Stacks
+ *  These are the known alternative USB stacks which are designed for and run exclusively on the USB AVR series microcontrollers,
+ *  which contain on-chip USB controller hardware for maximum features and speed.
+ *
+ *  - <b>Name:</b> Atmel USB AVR Stack (<i>Atmel Inc.</i>) \n
+ *    <b>Cost:</b> Free \n
+ *    <b>License:</b> Atmel Limited License (see Atmel download for details) \n
+ *    <b>Website:</b> http://atmel.com/dyn/products/app_notes.asp?family_id=607#USB \n
+ *    <b>Description:</b> This is the official Atmel USB AVR stack, for their 8-bit USB AVR lineup. Each series of
+ *                        USB AVR is seperated into a seperate download stack, which is both AVR-GCC and IAR compatible.
+ *
+ *  - <b>Name:</b> Dr. Stefan Salewski's AT90USB1287 Stack (<i>Dr. Stefan Salewski</i>) \n
+ *    <b>Cost:</b> Free \n
+ *    <b>License:</b> GPL \n
+ *    <b>Website:</b> http://www.ssalewski.de/AT90USB_firmware.html.en \n
+ *    <b>Description:</b> This is a GPL'd library specifically designed for the AT90USB1287, by Dr. Stefan Salewski, a
+ *                        German Physicist. It compiles for AVR-GCC and can potentially be modified to work on other USB
+ *                        AVR models.
+ *
+ *  - <b>Name:</b> PJRC Teensy Stack (<i>Paul Stoffregen</i>) \n
+ *    <b>Cost:</b> Free \n
+ *    <b>License:</b> BSD \n
+ *    <b>Website:</b> http://www.pjrc.com/teensy/usb_debug_only.html \n
+ *    <b>Description:</b> Not so much a complete stack as a collection of USB enabled demos, this library is specifically
+ *                        designed for the PJRC Teensy line of USB AVRs, and thus may need to be modified for other USB AVR
+ *                        chips. These minimal code samples shows the inner workings of the USB controller, without all the 
+ *                        abstraction present in most other USB AVR stacks. 
+ *
+ *  \section Sec_SoftwareStacks Software AVR Stacks
+ *  These are the known alternative USB stacks which can run on regular AVR models, lacking dedicated hardware USB controllers
+ *  via a bit-banged (emulated) version of the USB protocol. They are limited in their capabilities due to the cycles required
+ *  to be dedicated to managing the USB bus, but offer a cheap way to implement USB functionality into a design.
+ *
+ *  - <b>Name:</b> AVR309: Software USB (<i>Atmel</i>) \n
+ *    <b>Cost:</b> Free \n
+ *    <b>License:</b> None Stated \n
+ *    <b>Website:</b> http://www.atmel.com/dyn/Products/app_notes.asp?family_id=607 \n
+ *    <b>Description:</b> Atmel's official software USB implementation, an Application Note containing work by Igor Cesko. This
+ *                        is a minimal assembly-only implementation of software USB, providing HID functionality. Less compile
+ *                        options than V-USB (see below).
+ *
+ *  - <b>Name:</b> V-USB (<i>Objective Development</i>) \n
+ *    <b>Cost:</b> Free for some uses, see website for licensing \n
+ *    <b>License:</b> Dual GPL2/Custom \n
+ *    <b>Website:</b> http://www.obdev.at/products/vusb/index.html \n
+ *    <b>Description:</b> Well regarded and complete USB 1.1 software stack for several AVR models, implementing Low Speed HID.
+ *                        Used in many commercial and non-commercial designs, with user-submitted projects available for viewing
+ *                        on the company's website. Uses C language code mixed with assembly for time-critical sections.
+ */
  
\ No newline at end of file
diff --git a/LUFA/ManPages/BuildingLinkableLibraries.txt b/LUFA/ManPages/BuildingLinkableLibraries.txt
index 51fb973b3..70919c0a2 100644
--- a/LUFA/ManPages/BuildingLinkableLibraries.txt
+++ b/LUFA/ManPages/BuildingLinkableLibraries.txt
@@ -1,22 +1,22 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \page Page_BuildLibrary Building as a Linkable Library

- *

- *  The LUFA library can be built as a proper linkable library (with the extention .a) under AVR-GCC, so that

- *  the library does not need to be recompiled with each revision of a user project. Instructions for creating

- *  a library from a given source tree can be found in the AVR-GCC user manual included in the WinAVR install

- *  /Docs/ directory.

- *

- *  However, building the library is <b>not recommended</b>, as the static (compile-time) options will be

- *  unable to be changed without a recompilation of the LUFA code. Therefore, if the library is to be built

- *  from the LUFA source, it should be made to be application-specific and compiled with the static options

- *  that are required for each project (which should be recorded along with the library).

- *

- *  Normal library use has the library components compiled in at the same point as the application code, as

- *  demonstrated in the library demos and applications. This is the preferred method, as the library is recompiled

- *  each time to ensure that all static options for a particular application are applied.

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \page Page_BuildLibrary Building as a Linkable Library
+ *
+ *  The LUFA library can be built as a proper linkable library (with the extention .a) under AVR-GCC, so that
+ *  the library does not need to be recompiled with each revision of a user project. Instructions for creating
+ *  a library from a given source tree can be found in the AVR-GCC user manual included in the WinAVR install
+ *  /Docs/ directory.
+ *
+ *  However, building the library is <b>not recommended</b>, as the static (compile-time) options will be
+ *  unable to be changed without a recompilation of the LUFA code. Therefore, if the library is to be built
+ *  from the LUFA source, it should be made to be application-specific and compiled with the static options
+ *  that are required for each project (which should be recorded along with the library).
+ *
+ *  Normal library use has the library components compiled in at the same point as the application code, as
+ *  demonstrated in the library demos and applications. This is the preferred method, as the library is recompiled
+ *  each time to ensure that all static options for a particular application are applied.
+ */
diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 4de0473a2..02b629609 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -1,918 +1,918 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

- /** \page Page_ChangeLog Project Changelog

-  *

-  *  \section Sec_ChangeLogXXXXXX Version XXXXXX

-  *

-  *  <b>New:</b>

-  *  - Added incomplete MIDIToneGenerator project

-  *  - Added new Relay Controller Board project (thanks to OBinou)

-  *  - Added board hardware driver support for the Teensy, USBTINY MKII, Benito and JM-DB-U2 lines of third party USB AVR boards

-  *  - Added new ATTR_NO_INIT variable attribute for global variables that should not be automatically cleared on startup

-  *  - Added new ENDPOINT_*_BusSuspended error code to the Endpoint function, so that the stream functions early-abort if the bus

-  *    is suspended before or during a transfer

-  *  - Added new EVENT_CDC_Device_BreakSent() event and CDC_Host_SendBreak() function to the Device and Host CDC Class drivers

-  *

-  *  <b>Changed:</b>

-  *  - AVRISP programmer project now has a more robust timeout system

-  *  - Added a timeout value to the TWI_StartTransmission() function, within which the addressed device must respond

-  *  - Webserver project now uses the board LEDs to indicate the current IP configuration state

-  *  - Added ENABLE_TELNET_SERVER compile time option to the Webserver project to disable the TELNET server if desired

-  *  - Increased throughput of the USBtoSerial demo on systems that send multiple bytes per packet (thanks to Opendous Inc.)

-  *  - Double bank CDC endpoints in the XPLAIN Bridge project, re-enable JTAG once the mode selection pin has been sampled.

-  *  - Standardized the naming scheme given to configuration descriptor sub-elements in the Device mode demos, bootloaders

-  *    and projects

-  *  - All Class Driver Host mode demos now correctly set the board LEDs to READY once the enumeration process has completed

-  *  - Added LIBUSB_FILTERDRV_COMPAT compile time option to the AVRISP programmer project to make the code compatible with Windows

-  *    builds of avrdude at the expense of AVRStudio compatibility

-  *  - Removed two-step endpoint/pipe bank clear and switch sequence for smaller, faster endpoint/pipe code

-  *  - The USB_Init() function no longer calls sei() - the user is now responsible for enabling interrupts when they are ready

-  *    for them to be enabled (thanks to Andrei Krainev)

-  *  - The Audio_Device_IsSampleReceived() and Audio_Device_IsReadyForNextSample() functions are now inline, to reduce overhead

-  *  - Removed the cast to uint16_t on the set baud rate in the USBtoSerial project, so that the higher >1M baud rates can be

-  *    selected (thanks to Steffan Woltjer)

-  *  - Removed software PDI and TPI emulation from the AVRISP-MKII clone project as it was very buggy and slow - PDI and TPI must

-  *    now be implemented via seperate programming headers

-  *  - The CDC class bootloader now uses a watchdog reset rather than a soft-reset when exited to ensure that all hardware is

-  *    properly reset to their defaults

-  *  - Device mode class driver callbacks are now fired before the control request status stage is sent to prevent the host from

-  *    timing out if another request is immediately fired and the device has a lengthy callback routine

-  *

-  *  <b>Fixed:</b>

-  *  - Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin

-  *  - Fixed TWI_StartTransmission() corrupting the contents of the GPIOR0 register

-  *  - Fixed TWI driver not aborting when faced with no response after attempting to address a device on the bus

-  *  - Fixed ADC routines not correctly returning the last result when multiple channels were read

-  *  - Fixed ADC routines failing to read the extended channels (Channels 8 to 13, Internal Temperature Sensor) on the

-  *    U4 series USB AVR parts

-  *  - Fixed LowLevel MassStorage demo broken on the U2 series USB AVRs due to unsupported double-banked endpoint modes used

-  *  - Fixed compilation error in the AudioInput demos when MICROPHONE_BIASED_TO_HALF_RAIL is defined (thanks to C. Scott Ananian)

-  *  - Fixed incorrect definition of HID_ALIGN_DATA() causing incorrect HID report item data alignment

-  *  - Fixed Still Image Host class driver not resetting the transaction ID when a new session is opened, fixed driver not sending

-  *    a valid session ID to the device

-  *  - Removed invalid dfu and flip related targets from the bootloaders - bootloaders can only be replaced with an external programmer

-  *  - Fixed Set/Clear Feature requests directed to a non-configured endpoint not returning a stall to the host

-  *  - Fixed HID Device Class Driver not allocating a temporary buffer when the host requests a report via the control endpoint and the

-  *    user has set the PrevReportINBuffer driver configuration element to NULL (thanks to Lars Noschinski)

-  *  - Fixed device state not being reset to DEVICE_STATE_Default if the host sets a 0x00 device address

-  *  - Fixed device not stalling configuration requests before the device's address has been set

-  *  - Fixed possibility of internal signature retrieval being corrupted if an interrupt occurs during a signature byte

-  *    read (thanks to Andrei Krainev)

-  *  - Fixed device state not being reset back to the default state if the host sets the address to 0

-  *  - Fixed Set Configuration requests not being stalled until the host has set the device's address

-  *  - Fixed Host mode HID class driver not sending the correct report type when HID_Host_SendReportByID() was called and the 

-  *    HID_HOST_BOOT_PROTOCOL_ONLY compile time option is set

-  *  - Fixed INTERRUPT_CONTROL_ENDPOINT compile time option preventing other interrupts from occuring while the control endpoint

-  *    request is being processed, causing possible lockups if a USB interrupt occurs during a transfer

-  *  - Fixed TeensyHID bootloader not working on some USB AVR models with the official TeensyLoader GUI application

-  *  - Remove incorrect Abstract Call Management class specific descriptor from the CDC demos, bootloaders and projects

-  *

-  *  \section Sec_ChangeLog100219 Version 100219

-  *

-  *  <b>New:</b>

-  *  - Added TPI programming support for 6-pin ATTINY devices to the AVRISP programmer project (thanks to Tom Light)

-  *  - Added command timeout counter to the AVRISP project so that the device no longer freezes when incorrectly connected

-  *    to a target

-  *  - Added new TemperatureDataLogger application, a USB data logger which writes to the device's dataflash and appears to

-  *    the host as a standard Mass Storage device when inserted

-  *  - Added MIDI event packing support to the MIDI Device and Host mode Class drivers, allowing for multiple MIDI events to

-  *    sent or received in packed form in a single USB packet

-  *  - Added new MIDI send buffer flush routines to the MIDI Device and Host mode Class drivers, to flush packed events

-  *  - Added master mode hardware TWI driver for easy TWI peripheral control

-  *  - Added ADC MUX masks for the standard ADC input channels on all AVR models with an ADC, altered demos to use these masks

-  *    as on some models, the channel number is not identical to its single-ended ADC MUX mask

-  *  - New Webserver project, a RNDIS host USB webserver using the open source uIP TCP/IP network stack and FatFS library

-  *  - New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which

-  *    do not adversely affect the code operation (currently only the LEDs driver)

-  *  - Added keyboard modifier masks (HID_KEYBOARD_MODIFER_*) and LED report masks (KEYBOARD_LED_*) to the HID class driver and

-  *    Keyboard demos

-  *  - Added .5MHz recovery clock to the AVRISP programmer project when in ISP programming mode to correct mis-set fuses

-  *

-  *  <b>Changed:</b>

-  *  - Slowed down software USART carried PDI programming in the AVRISP project to prevent transmission errors

-  *  - Renamed the AVRISP project folder to AVRISP-MKII to reduce confusion

-  *  - Renamed the RESET_LINE_* makefile tokens in the AVRISP MKII Project to AUX_LINE_*, as they are not always used for target

-  *    reset

-  *  - Changed over the MassStorageKeyboard Class driver device demo to use Start of Frame events rather than a timer to keep track

-  *    of elapsed milliseconds

-  *  - Inlined currently unused (but standardized) maintenance functions in the Device and Host Class drivers to save space

-  *  - The XPLAINBridge project now selects between a USB to Serial bridge and a PDI programmer on startup, reading the JTAG port's

-  *    TDI pin to determine which mode to use

-  *  - Removed the stream example code from the Low Level VirtualSerial demos, as they were buggy and only served to add clutter

-  *

-  *  <b>Fixed:</b>

-  *  - Fixed AVRISP project not able to enter programming mode when ISP protocol is used

-  *  - Fixed AVRISP PDI race condition where the guard time between direction changes could be interpreted as a start bit

-  *  - Fixed ADC_IsReadingComplete() returning an inverted result

-  *  - Fixed blocking CDC streams not aborting when the host is disconnected

-  *  - Fixed XPLAIN board Dataflash driver broken due to incorrect preprocessor commands

-  *  - Fixed inverted XPLAIN LED driver output (LED turned on when it was supposed to be turned off, and vice-versa)

-  *  - Fixed Class Driver struct interface numbers in the KeyboardMouse and VirtualSerialMouse demos (thanks to Renaud Cerrato)

-  *  - Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers

-  *  - Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders

-  *  - Fixed Benito project not resetting the target AVR automatically when programming has completed

-  *  - Fixed DFU bootloader programming not discarding the correct number of filler bytes from the host when non-aligned programming

-  *    ranges are specified (thanks to Thomas Bleeker)

-  *  - Fixed CDC and RNDIS host demos and class drivers - bidirectional endpoints should use two seperate pipes, not one half-duplex pipe

-  *  - Fixed Pipe_IsEndpointBound() not taking the endpoint's direction into account

-  *  - Fixed EEPROM and FLASH ISP programming in the AVRISP project

-  *  - Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and USB_CONFIG_ATTR_REMOTEWAKEUP tokens (thanks to Claus Christensen)

-  *  - Fixed SerialStream driver blocking while waiting for characters to be received instead of returning EOF

-  *  - Fixed SerialStream driver not setting stdin to the created serial stream (thanks to Mike Alexander)

-  *  - Fixed USB_GetHIDReportSize() returning the number of bits in the specified report instead of bytes

-  *  - Fixed AVRISP project not extending the command delay after each successful page/word/byte program

-  *  - Fixed accuracy of the SERIAL_UBBRVAL() and SERIAL_2X_UBBRVAL() macros for higher baudrates (thanks to Renaud Cerrato)

-  *

-  *  \section Sec_ChangeLog091223 Version 091223

-  *

-  *  <b>New:</b>

-  *  - Added activity LED indicators to the AVRISP project to indicate when the device is busy processing a command

-  *  - The USB target family and allowable USB mode tokens are now public and documented (USB_CAN_BE_*, USB_SERIES_*_AVR)

-  *  - Added new XPLAIN USB to Serial Bridge project (thanks to John Steggall for initial proof-of-concept, David Prentice

-  *    and Peter Danneger for revised software USART code)

-  *  - Added new RNDIS Ethernet Host LowLevel demo

-  *  - Added new RNDIS Ethernet Host Class Driver

-  *  - Added new RNDIS Ethernet Host ClassDriver demo

-  *  - Added CDC_Host_Flush() function to the CDC Host Class driver to flush sent data to the attached device

-  *  - Added PDI programming support for XMEGA devices to the AVRISP programmer project (thanks to Justin Mattair)

-  *  - Added support for the XPLAIN board Dataflash, with new XPLAIN_REV1 board target for the different dataflash used

-  *    on the first revision boards compared to the one mounted on later revisions

-  *  - Added new HID_ALIGN_DATA() macro to return the pre-retrieved value of a HID report item, left-aligned to a given datatype

-  *  - Added new PreviousValue to the HID Report Parser report item structure, for easy monitoring of previous report item values

-  *  - Added new EVK527 board target

-  *  - Added new USB_Host_GetDeviceStringDescriptor() convenience function

-  *  - Added new LEDNotification project to the library, to give a visual LED notification on new events from the host

-  *  - Added new NO_DEVICE_REMOTE_WAKEUP and NO_DEVICE_SELF_POWER compile time options

-  *

-  *  <b>Changed:</b>

-  *  - Removed code in the Keyboard demos to send zeroed reports between two reports with differing numbers of keycodes

-  *    as this relied on non-standard OS driver behaviour to repeat key groups

-  *  - The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class

-  *    driver common defines, rather than being defined in the Host mode Class driver section only

-  *  - The USB_MODE_HOST token is now defined even when host mode is not available

-  *  - The CALLBACK_HID_Device_CreateHIDReport() HID Device Class driver callback now has a new ReportType parameter to

-  *    indicate the report type to generate

-  *  - All Class Drivers now return false or the "DeviceDisconnected" error code of their respective error enums when a function

-  *    is called when no host/device is connected where possible

-  *  - The HOST_SENDCONTROL_DeviceDisconnect enum value has been renamed to HOST_SENDCONTROL_DeviceDisconnected to be in line

-  *    with the rest of the library errorcodes

-  *  - Make MIDI device demos also turn off the on board LEDs if MIDI Note On messages are sent with a velocity of zero,

-  *    which some devices use instead of Note Off messages (thanks to Robin Green)

-  *  - The CDC demos are now named "VirtualSerial" instead to indicate the demos' function rather than its implemented USB class,

-  *    to reduce confusion and to be in line with the rest of the LUFA demos

-  *  - The SImage_Host_SendBlockHeader() and SImage_Host_ReceiveBlockHeader() Still Image Host Class driver functions are now public

-  *

-  *  <b>Fixed:</b>

-  *  - Added missing CDC_Host_CreateBlockingStream() function code to the CDC Host Class driver

-  *  - Fixed incorrect values for REPORT_ITEM_TYPE_* enum values causing corrupt data in the HID Host Parser

-  *  - Fixed misnamed SI_Host_USBTask() and SI_Host_ConfigurePipes() functions

-  *  - Fixed broken USB_GetNextDescriptor() function causing the descriptor to jump ahead double the expected amount

-  *  - Fixed Pipe_IsEndpointBound() not masking the given Endpoint Address against PIPE_EPNUM_MASK

-  *  - Fixed host state machine not enabling Auto VBUS mode when HOST_DEVICE_SETTLE_DELAY_MS is set to zero

-  *  - Fixed misnamed Pipe_SetPipeToken() macro for setting a pipe's direction

-  *  - Fixed CDCHost failing on devices with bidirectional endpoints

-  *  - Fixed USB driver failing to define the PLL prescaler mask for the ATMEGA8U2 and ATMEGA16U2

-  *  - Fixed HID Parser not distributing the Usage Min and Usage Max values across an array of report items

-  *  - Fixed Mass Storage Host Class driver and Low Level demo not clearing the error condition if an attached device returns a

-  *    STALL to a GET MAX LUN request (thanks to Martin Luxen)

-  *  - Fixed TeensyHID bootloader not properly shutting down the USB interface to trigger a disconnection on the host before resetting

-  *  - Fixed MassStorageHost Class driver demo not having USB_STREAM_TIMEOUT_MS compile time option set properly to prevent slow 

-  *    devices from timing out the data pipes

-  *  - Fixed the definition of the Endpoint_BytesInEndpoint() macro for the U4 series AVR parts

-  *  - Fixed MIDI host Class driver MIDI_Host_SendEventPacket() routine not properly checking for Pipe ready before writing

-  *  - Fixed use of deprecated struct initializers, removed library unused parameter warnings when compiled with -Wextra enabled

-  *  - Fixed Still Image Host Class driver truncating the PIMA response code (thanks to Daniel Seibert)

-  *  - Fixed USB_CurrentMode not being reset to USB_MODE_NONE when the USB interface is shut down and both Host and Device modes can be

-  *    used (thanks to Daniel Levy)

-  *  - Fixed TeensyHID bootloader not enumerating to the host correctly (thanks to Clint Fisher)

-  *  - Fixed AVRISP project timeouts not checking for the correct timeout period (thanks to Carl Ott)

-  *  - Fixed STK525 Dataflash driver using incorrect bit-shifting for Dataflash addresses (thanks to Tim Mitchell)

-  *

-  *  \section Sec_ChangeLog091122 Version 091122

-  *

-  *  <b>New:</b>

-  *  - Added new Dual Role Keyboard/Mouse demo

-  *  - Added new HID_HOST_BOOT_PROTOCOL_ONLY compile time token to reduce the size of the HID Host Class driver when

-  *    Report protocol is not needed

-  *  - Added new MIDI LowLevel and ClassDriver Host demo, add new MIDI Host Class driver

-  *  - Added new CDC/Mouse ClassDriver device demo

-  *  - Added new Joystick Host ClassDriver and LowLevel demos

-  *  - Added new Printer Host mode Class driver

-  *  - Added new Printer Host mode ClassDriver demo

-  *  - Added optional support for double banked endpoints and pipes in the Device and Host mode Class drivers

-  *  - Added new stream creation function to the CDC Class drivers, to easily make standard I/O streams from CDC Class driver instances

-  *

-  *  <b>Changed:</b>

-  *  - Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for sytax errors in the library

-  *  - MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs

-  *  - Cleanups to the Device mode Mass Storage demo application SCSI routines

-  *  - Changed Audio Class driver sample read/write functions to be inline, to reduce the number of cycles needed to transfer

-  *    samples to and from the device (allowing more time for sample processing and output)

-  *  - Audio class Device mode demos now work at both 16MHz and 8MHz, rather than just at 8MHz

-  *  - The previous USBtoSerial demo has been moved into the projects directory, as it was just a modified CDC demo

-  *  - The Endpoint/Pipe functions now use the const qualifier on the input buffer

-  *  - Changed the CALLBACK_HIDParser_FilterHIDReportItem() callback to pass a HID_ReportItem_t rather than just the current

-  *    item's attributes, to expose more information on the item (including it's type, collection path, etc.)

-  *  - Changed MouseHostWithParser demos to check that the report items have a Mouse usage collection as a parent at some point,

-  *    to prevent Joysticks from enumerating with the demo

-  *  - Corrected the name of the misnamed USB_GetDeviceConfigDescriptor() function to USB_Host_GetDeviceConfigDescriptor().

-  *  - Keyboard LowLevel/ClassDriver demos now support multiple simultaneous keypresses (up to 6) per report

-  *

-  *  <b>Fixed:</b>

-  *  - Fixed PrinterHost demo returning invalid Device ID data when the attached device does not have a

-  *    device ID (thanks to Andrei Krainev)

-  *  - Changed LUFA_VERSION_INTEGER define to use BCD values, to make comparisons eaiser

-  *  - Fixed issue in the HID Host class driver's HID_Host_SendReportByID() routine using the incorrect mode (control/pipe)

-  *    to send report to the attached device

-  *  - Fixed ClassDriver AudioOutput device demo not selecting an audio output mode

-  *  - Fixed incorrect SampleFrequencyType value in the AudioInput and AudioOutput ClassDriver demos' descriptors

-  *  - Fixed incorrect event name rule in demo/project/bootloader makefiles

-  *  - Fixed HID device class driver not reselecting the correct endpoint once the user callback routines have been called

-  *  - Corrected HID descriptor in the Joystick Device demos - buttons should be placed outside the pointer collection

-  *  - Fixed HID report parser collection paths invalid due to misplaced semicolon in the free path item search loop

-  *  - Fixed HID host Class driver report send/receive report broken when issued through the control pipe

-  *  - Fixed HOST_STATE_AS_GPIOR compile time option being ignored when in host mode (thanks to David Lyons)

-  *  - Fixed LowLevel Keyboard demo not saving the issues report only after it has been sent to the host

-  *  - Fixed Endpoint_Write_Control_Stream_* functions not sending a terminating IN when given data Length is zero

-  *

-  *  \section Sec_ChangeLog090924 Version 090924

-  *

-  *  <b>New:</b>

-  *  - Added new host mode class drivers and matching demos to the library for rapid application development

-  *  - Added flag to the HID report parser to indicate if a device has multiple reports

-  *  - Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and

-  *    USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode

-  *  - Added new Endpoint_SetEndpointDirection() macro for bidirectional endpoints

-  *  - Added new AVRISP project, a LUFA powered clone of the Atmel AVRISP-MKII programmer

-  *  - Added ShutDown() functions for all hardware peripheral drivers, so that peripherals can be turned off after use

-  *  - Added new CDC_Device_Flush() command to the device mode CDC Class driver to flush Device->Host data

-  *  - Added extra masks to the SPI driver, changed SPI_Init() so that the clock polarity and sample modes can be set

-  *  - Added new callback to the HID report parser, so that the user application can filter only the items it is interested

-  *    in to be stored into the HIDReportInfo structure to save RAM

-  *  - Added support for the officially recommended external peripheral layout for the BUMBLEB board (thanks to Dave Fletcher)

-  *  - Added new Pipe_IsFrozen() macro to determine if the currently selected pipe is frozen

-  *  - Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID

-  *  - Added new combined Mass Storage and Keyboard demo (thanks to Matthias Hullin)

-  *  

-  *  <b>Changed:</b>

-  *  - SetIdle requests to the HID device driver with a 0 idle period (send changes only) now only affect the requested

-  *    HID interface within the device, not all HID interfaces

-  *  - Added explicit attribute masks to the device mode demos' descriptors

-  *  - Added return values to the CDC and MIDI class driver transmit functions

-  *  - Optimized Endpoint_Read_Word_* and Pipe_Read_Word_* macros to reduce compiled size

-  *  - Added non-null function parameter pointer restrictions to USB Class drivers to improve user code reliability

-  *  - Added new "Common" section to the class drivers, to hold all mode-independant definitions for clarity

-  *  - Moved SCSI command/sense constants into the Mass Storage Class driver, instead of the user-code

-  *  - Altered the SCSI commands in the LowLevel Mass Storage Host to save on FLASH space by reducing function calls

-  *  - Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks

-  *    and data validations internally, to simplify user code

-  *  - Changed HIDParser to only zero out important values in the Parsed HID Report Item Information structure to save cycles

-  *  - The HID report parser now always processed FEATURE items - HID_ENABLE_FEATURE_PROCESSING token now has no effect

-  *  - The HID report parser now always ignores constant-data items, HID_INCLUDE_CONSTANT_DATA_ITEMS token now has no effect

-  *  - The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool

-  *  - Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names

-  *    are used in a project

-  *  - The HID Report Parser now gives information on the total length of each report within a HID interface

-  *  - The USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now seperate USB_Descriptor_* and

-  *    USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so both may be used

-  *

-  *  <b>Fixed:</b>

-  *  - Fixed possible lockup in the CDC device class driver, when the host sends data that is a multiple of the

-  *    endpoint's bank

-  *  - Fixed swapped parameters in the HID state memory copy call while processing a HID PUSH item in the HID report parser

-  *  - Fixed memory corruption HID report parser when too many COLLECTION or PUSH items were processed

-  *  - Fixed HID report parser not resetting the FEATURE item count when a REPORT ID item is encountered

-  *  - Fixed USBtoSerial demos not reading in UDR1 when the USART receives data but the USB interface is not enumerated,

-  *    causing continuous USART receive interrupts

-  *  - Fixed misspelt event name in the Class driver USBtoSerial demo, preventing correct operation

-  *  - Fixed invalid data being returned when a GetStatus request is issued in Device mode with an unhandled data recipient

-  *  - Added hardware USART receive interrupt and software buffering to the Benito project to ensure received data is not

-  *    missed or corrupted

-  *  - Fixed Device mode HID Class driver always sending IN packets, even when nothing to report

-  *  - Fixed Device mode HID Class driver not explicitly initializing the ReportSize parameter to zero before calling callback

-  *    routine, so that ignored callbacks don't cause incorrect data to be sent

-  *  - Fixed StillImageHost not correctly freezing and unfreezing data pipes while waiting for a response block header

-  *  - Fixed error in the PrinterHost demo preventing the full page data from being sent to the attached device (thanks to John Andrews)

-  *  - Fixed CDC based demos and projects' INF driver files under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker)

-  *  - Re-add in missing flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)

-  *  - Fix allowable F_CPU values comment in project makefiles to more accurately reflect the allowable values on the USB AVRs

-  *  - Fixed DFU and CDC class bootloaders on the series 2 USB AVRs, corrected invalid signatures, added support for the new

-  *    ATMEGAxx2 series 2 variant AVRs to the DFU bootloader

-  *  - Fixed Low Level USBtoSerial demo not storing received characters (thanks to Michael Cooper)

-  *  - Fixed MIDI Device Class driver not sending/receiving MIDI packets of the correct size (thanks to Thomas Bleeker)

-  *

-  *

-  *  \section Sec_ChangeLog090810 Version 090810

-  *

-  *  <b>New:</b>

-  *  - Added new device class drivers and matching demos to the library for rapid application development

-  *  - Added new PrinterHost demo (thanks to John Andrews)

-  *  - Added USB Missle Launcher project, submitted by Dave Fletcher

-  *  - Added new Benito Arduino Programmer project

-  *  - Added incomplete device and host mode demos for later enhancement

-  *  - Updated MassStorage device block write routines to use ping-pong Dataflash buffering to increase throughput by around 30%

-  *  - Error status LEDs shown when device endpoint configuration fails to complete in all demos and projects

-  *  - Added new USB_Host_SetDeviceConfiguration() convenience function for easy configuration selection of devices while in USB

-  *    host mode

-  *  - Added new USB_Host_ClearPipeStall() convenience function to clear a stall condition on an attached device's endpoint

-  *  - Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor

-  *  - Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers

-  *  - Added new USE_INTERNAL_SERIAL define for using the unique serial numbers in some AVR models as the USB device's serial number,

-  *    added NO_INTERNAL_SERIAL compile time option to turn off new serial number reading code

-  *  - Added new DATAFLASH_CHIP_MASK() macro to the Dataflash driver, which returns the Dataflash select mask for the given chip index

-  *  - Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the

-  *    device has been removed (for use when an error occurs or communications with the device have completed)

-  *  - Added new FAST_STREAM_TRANSFERS compile time option for faster stream transfers via multiple bytes copied per stream loop

-  *  - Added stdio stream demo code to the CDC device demos, to show how to create standard streams out of the virtual serial ports

-  *  - Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions

-  *  - Added new USE_FLASH_DESCRIPTORS and FIXED_NUM_CONFIGURATIONS compile time options

-  *  - Added support for the new ATMEGA32U2, ATMEGA16U2 and ATMEGA8U2 AVR models

-  *  - Added new USB_DeviceState variable to keep track of the current Device mode USB state

-  *  - Added new LEDs_ToggleLEDs() function to the LEDs driver

-  *  - Added new Pipe_BoundEndpointNumber() and Pipe_IsEndpointBound() functions

-  *  - Added new DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR compile time options

-  *  - Added 404 Not Found errors to the webserver in the RNDIS demos to indicate invalid URLs

-  *  

-  *  <b>Changed:</b>

-  *  - Deprecated psuedo-scheduler and removed dynamic memory allocator from the library (first no longer needed and second unused)

-  *  - The device-mode CALLBACK_USB_GetDescriptor() function now has an extra parameter so that the memory space in which the requested

-  *    descriptor is located can be specified. This means that descriptors can now be located in multiple memory spaces within a device.

-  *  - Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality

-  *  - Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead

-  *  - Extended USB_GetDeviceConfigDescriptor() routine to require the configuration number within the device to fetch

-  *  - Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning,

-  *    no need to call Dataflash_ToggleSelectedChipCS() afterwards

-  *  - Low level API MIDI device demo no longer blocks if a note change event is sent while the endpoint is not ready

-  *  - Pipe_GetErrorFlags() now returns additional error flags for overflow and underflow errors

-  *  - Pipe stream functions now automatically set the correct pipe token, so that bidirectional pipes can be used

-  *  - Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling

-  *    the existing Pipe_SetFiniteINRequests() function

-  *  - Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case

-  *  - Host mode demos now use sane terminal escape codes, so that text is always readable and events/program output is visually distinguished

-  *    from oneanother using foreground colours

-  *  - Internal per-device preprocessing conditions changed to per-device series rather than per-controller group for finer-grain

-  *    internal control

-  *  - Interrupts are no longer disabled during the processing of Control Requests on the default endpoint while in device mode

-  *  - AudioOutput demos now always output to board LEDs, regardless of output mode (removed AUDIO_OUT_LEDS project option)

-  *  - Removed SINGLE_DEVICE_CONFIGURATION compile time option in favour of the new FIXED_NUM_CONFIGURATIONS option so that the exact number

-  *    of device configurations can be defined statically

-  *  - Removed VBUS events, as they are already exposed to the user application via the regular device connection and disconnection events

-  *  - Renamed and altered existing events to properly seperate out Host and Device mode events

-  *

-  *  <b>Fixed:</b>

-  *  - Changed bootloaders to use FLASHEND rather than the existence of RAMPZ to determine if far FLASH pointers are needed to fix

-  *    bootloaders on some of the USB AVR devices where avr-libc erronously defines RAMPZ

-  *  - Fixes to MassStorageHost for better device compatibility (increase command timeout, change MassStore_WaitForDataReceived()

-  *    to only unfreeze and check one data pipe at a time) to prevent incorrect device enumerations and freezes while trasferring data

-  *  - Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is

-  *    cleared to prevent endpoint type corruption

-  *  - Fixed issue opening CDC-ACM ports on hosts when the CDC device tries to send data before the host has set the line encoding

-  *  - Fixed USB_OPT_MANUAL_PLL option being ignored during device disconnects on some models (thanks to Brian Dickman)

-  *  - Fixed documentation mentioning Pipe_GetCurrentToken() function when correct function name is Pipe_GetPipeToken()

-  *  - Fixed ADC driver for the ATMEGA32U4 and ATMEGA16U4 (thanks to Opendous Inc.)

-  *  - Fixed CDCHost demo unfreezing the pipes at the point of configuration, rather than use

-  *  - Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command

-  *  - Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails

-  *  - Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used

-  *  - Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected

-  *  - Fixed Mouse/Keyboard demos not performing the correct arithmetic on the Idle period at the right times (thanks to Brian Dickman)

-  *  - Fixed GenericHID failing HID class tests due to incorrect Logical Minimum and Logical Maximum values (thanks to Søren Greiner)

-  *  - Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews)

-  *  - Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits

-  *  - Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered

-  *  - Fixed incorrect BUTTONS_BUTTON1 for the STK526 target

-  *  - Fixed RNDIS demos freezing when more than one connection was attempted simultaneously, causing memory corruption

-  *  - Fixed USBtoSerial demo receiving noise from the USART due to pullup not being enabled

-  *

-  *

-  *  \section Sec_ChangeLog090605 Version 090605

-  *

-  *  - Fixed bug in RNDISEthernet and DualCDC demos not using the correct USB_ControlRequest structure for control request data

-  *  - Fixed documentation showing incorrect USB mode support on the supported AVRs list

-  *  - Fixed RNDISEthernet not working under Linux due to Linux requiring an "optional" RNDIS request which was unhandled

-  *  - Fixed Mouse and Keyboard device demos not acting in accordance with the HID specification for idle periods (thanks to Brian Dickman)

-  *  - Removed support for endpoint/pipe non-control interrupts; these did not act in the way users expected, and had many subtle issues

-  *  - Fixed Device Mode not handling Set Feature and Clear Feature Chapter 9 requests that are addressed to the device (thanks to Brian Dickman)

-  *  - Moved control endpoint interrupt handling into the library itself, enable via the new INTERRUPT_CONTROL_ENDPOINT token

-  *  - Fixed CDCHost not clearing configured pipes and resetting configured pipes mask when a partially enumerated invalid CDC

-  *    interface is skipped

-  *  - Clarified the size of library tokens which accept integer values in the Compile Time Tokens page, values now use the smallest datatype

-  *    inside the library that is able to hold their defined value to save space

-  *  - Removed DESCRIPTOR_ADDRESS() macro as it was largely supurflous and only served to obfuscate code

-  *  - Rewritten event system to remove all macros, to make user code clearer

-  *  - Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley)

-  *  - Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code

-  *  - Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code

-  *  - USB_IsConnected is now cleared before the USB_Disconnect() event is fired in response to VBUS being removed

-  *  - Fixed incorrect PID value being used in the USBtoSerial project (thanks to Phill)

-  *  - Deleted StdDescriptors.c, renamed USB_GetDescriptor() to CALLBACK_USB_GetDescriptor, moved ConfigDescriptor.c/.h from the

-  *    LUFA/Drivers/USB/Class/ directory to LUFA/Drivers/USB/HighLevel/ in preperation for the new USB class APIs

-  *  - Moved out each demos' functionality library files (e.g. Ring Buffer library) to /Lib directories for a better directory structure

-  *  - Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt

-  *  - Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition

-  *    becomes true

-  *

-  *

-  *  \section Sec_ChangeLog090510 Version 090510

-  *

-  *  - Added new GenericHIDHost demo

-  *  - Corrections to the KeyboardHost and MouseHost demos' pipe handling to freeze and unfreeze the data pipes at the point of use

-  *  - KeyboardHost, MouseHost and GenericHIDHost demos now save and restore the currently selected pipe inside the pipe ISR

-  *  - Changed GenericHID device demo to use the LUFA scheduler, added INTERRUPT_DATA_ENDPOINT and INTERRUPT_CONTROL_ENDPOINT compile

-  *    time options

-  *  - All comments in the library, bootloaders, demos and projects have now been spell-checked and spelling mistakes/typos corrected

-  *  - Added new PIMA_DATA_SIZE() define to the Still Image Host demo

-  *  - Add call to MassStore_WaitForDataReceived() in MassStore_GetReturnedStatus() to ensure that the CSW has been received in the

-  *    extended MSC timeout period before continuing, to prevent long processing delays from causing the MassStore_GetReturnedStatus()

-  *    to early-abort (thanks to Dmitry Maksimov)

-  *  - Move StdRequestType.h, StreamCallbacks.h, USBMode.h from the LowLevel USB driver directory to the HighLevel USB driver directory,

-  *    where they are more suited

-  *  - Removed all binary constants and replaced with decimal or hexadecimal constants so that unpatched GCC compilers can still build the

-  *    code without having to be itself patched and recompiled first

-  *  - Added preprocessor checks and documentation to the bootloaders giving information about missing SIGNATURE_x defines due to

-  *    outdated avr-libc versions.

-  *  - Added support to the CDCHost demo for devices with multiple CDC interfaces which are not the correct ACM type preceding the desired

-  *    ACM CDC interface

-  *  - Fixed GenericHID demo not starting USB and HID management tasks when not using interrupt driven modes (thanks to Carl Kjeldsen)

-  *  - Fixed RNDISEthenet demo checking the incorrect message field for packet size constraints (thanks to Jonathan Oakley)

-  *  - Fixed WriteNextReport code in the GenericHIDHost demo using incorrect parameter types and not selecting the correct endpoint

-  *  - Adjusted sample CTC timer calculations in the AudioOutput and AudioInput demos to match the CTC calculations in the AVR datasheet,

-  *    and to fix instances where rounding caused the endpoint to underflow (thanks to Robin Theunis)

-  *  - The USB_Host_SendControlRequest() function no longer automatically selects the Control pipe (pipe 0), so that other control type

-  *    pipes can be used with the function

-  *  - The USB Host management task now saves and restores the currently selected pipe before and after the task completes

-  *  - Fixed GenericHIDHost demo report write routine incorrect for control type requests (thanks to Andrei Krainev)

-  *  - Removed Endpoint_ClearCurrentBank() and Pipe_ClearCurrentBank() in favour of new Endpoint_ClearIN(), Endpoint_ClearOUT(),

-  *    Pipe_ClearIN() and Pipe_ClearOUT() macros (done to allow for the detection of packets of zero length)

-  *  - Renamed *_ReadWriteAllowed() macros to *_IsReadWriteAllowed() to remain consistent with the rest of the LUFA API

-  *  - Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(), Endpoint_ClearSetupReceived() macro has been

-  *    renamed to Endpoint_ClearSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the

-  *    Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe

-  *    bank management API

-  *  - Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel from Curetis AG)

-  *  - Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity

-  *  - Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity

-  *  - Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway

-  *  - Renamed the main Drivers/AT90USBXXX directory to Drivers/Peripheral, renamed the Serial_Stream driver to SerialStream

-  *  - Fixed CDC and USBtoSerial demos freezing where buffers were full while still transmitting or receiving (thanks to Peter Hand)

-  *  - Removed "Host_" section of the function names in ConfigDescriptor.h, as most of the routines can now be used in device mode on the

-  *    device descriptor

-  *  - Renamed functions in the HID parser to have a "USB_" prefix and the acronym "HID" in the name

-  *  - Fixed incorrect HID interface class and subclass values in the Mouse and KeyboardMouse demos (thanks to Brian Dickman)

-  *  - Capitalised the "Descriptor_Search" and "Descriptor_Search_Comp" prefixes of the values in the DSearch_Return_ErrorCodes_t and

-  *    DSearch_Comp_Return_ErrorCodes_t enums

-  *  - Removed "ERROR" from the enum names in the endpoint and pipe stream error code enums

-  *  - Renamed the USB_PowerOnErrorCodes_t enum to USB_InitErrorCodes_t, renamed the POWERON_ERROR_NoUSBModeSpecified enum value to

-  *    USB_INITERROR_NoUSBModeSpecified

-  *  - Renamed USB_PowerOnFail event to USB_InitFailure

-  *  - Renamed OTG.h header functions to be more consistent with the rest of the library API

-  *  - Changed over all deprecated GCC structure tag initializers to the standardized C99 format (thanks to Mike Alexander)

-  *  - USB_HostRequest renamed to USB_ControlRequest, entire control request header is now read into USB_ControlRequest in Device mode

-  *    rather than having the library pass only partially read header data to the application

-  *  - The USB_UnhandledControlPacket event has had its parameters removed, in favour of accessing the new USB_ControlRequest structure

-  *  - The Endpoint control stream functions now correctly send a ZLP to the host when less data than requested is sent

-  *  - Fixed USB_RemoteWakeupEnabled flag never being set (the REMOTE WAKEUP Set Feature request was not being handled)

-  *  - Renamed the FEATURELESS_CONTROL_ONLY_DEVICE compile-time token to CONTROL_ONLY_DEVICE

-  *  - Endpoint configuration is now refined to give better output when all configurations have static inputs - removed the now useless

-  *    STATIC_ENDPOINT_CONFIGURATION compile time token

-  *  - Fixed SPI driver init function not clearing SPI2X bit when not needed

-  *  - Fixed PREVENT ALLOW MEDIUM REMOVAL command issuing in the MassStorageHost demo using incorrect parameters (thanks to Mike Alex)

-  *  - Fixed MassStorageHost demo broken due to an incorrect if statement test in MassStore_GetReturnedStatus()

-  *  - Fixed reversed signature byte ordering in the CDC bootloader (thanks to Johannes Raschke)

-  *  - Changed PIPE_CONTROLPIPE_DEFAULT_SIZE from 8 to 64 to try to prevent problems with faulty devices which do not respect the given

-  *    wLength value when reading in the device descriptor

-  *  - Fixed missing semicolon in the ATAVRUSBRF01 LED board driver code (thanks to Morten Lund)

-  *  - Changed LED board driver code to define dummy LED masks for the first four board LEDs, so that user code can be compiled for boards

-  *    with less than four LEDs without code modifications (thanks to Morten Lund)

-  *  - Changed HWB board driver to Buttons driver, to allow for the support of future boards with more than one mounted GPIO button

-  *  - Serial driver now correctly calculates the baud register value when in double speed mode

-  *  - Init function of the Serial driver is now static inline to product smaller code for the common-case of static init values

-  *    

-  *

-  *  \section Sec_ChangeLog090401 Version 090401

-  *

-  *  - Fixed MagStripe project configuration descriptor containing an unused (blank) endpoint descriptor

-  *  - Incorporated makefile changes by Denver Gingerich to retain compatibility with stock (non-WinAVR) AVR-GCC installations

-  *  - Fixed makefile EEPROM programming targets programming FLASH data in addition to EEPROM data

-  *  - LUFA devices now enumerate correctly with LUFA hosts

-  *  - Fixed Configuration Descriptor search routine freezing when a comparator returned a failure

-  *  - Removed HID report item serial dump in the MouseHostWithParser and KeyboardHostWithParser - useful only for debugging, and

-  *    slowed down the enumeration of HID devices too much

-  *  - Increased the number of bits per track which can be read in the MagStripe project to 8192 when compiled for the AT90USBXXX6/7

-  *  - Fixed KeyboardMouse demo discarding the wIndex value in the REQ_GetReport request

-  *  - USBtoSerial demo now discards all Rx data when not connected to a USB host, rather than buffering characters for transmission

-  *    next time the device is attached to a host.

-  *  - Added new F_CLOCK compile time constant to the library and makefiles, to give the raw input clock (used to feed the PLL before any

-  *    clock prescaling is performed) frequency, so that the PLL prescale mask can be determined

-  *  - Changed stream wait timeout counter to be 16-bit, so that very long timeout periods can be set for correct communications with

-  *    badly designed hosts or devices which greatly exceed the USB specification limits

-  *  - Mass Storage Host demo now uses a USB_STREAM_TIMEOUT_MS of two seconds to maintain compatibility with poorly designed devices

-  *  - Function attribute ATTR_ALWAYSINLINE renamed to ATTR_ALWAYS_INLINE to match other function attribute macro naming conventions

-  *  - Added ATTR_ALWAYS_INLINE attribute to several key inlined library components, to ensure they are inlined in all circumstances

-  *  - Removed SetSystemClockPrescaler() macro, the clock_prescale_set() avr-libc macro has been corrected in recent avr-libc versions

-  *  - Fixed incorrect/missing control status stage transfers on demos, bootloaders and applications (thanks to Nate Lawson)

-  *  - The NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded

-  *    to also remove parts of the Get Status chapter 9 request to further reduce code usage

-  *  - Makefile updated to include output giving the currently selected BOARD parameter value

-  *  - Board Dataflash driver now allows for dataflash ICs which use different shifts for setting the current page/byte address (thanks

-  *    to Kenneth Clubb)

-  *  - Added DataflashManager_WriteBlocks_RAM() and DataflashManager_ReadBlocks_RAM() functions to the MassStorage demo, to allow for easy

-  *    interfacing with a FAT library for dataflash file level access

-  *  - Corrected CDC class bootloader to fix a few bugs, changed address counter to store x2 addresses for convenience

-  *  - Fixed typos in the SPI driver SPI_SPEED_FCPU_DIV_64 and SPI_SPEED_FCPU_DIV_128 masks (thanks to Markus Zocholl)

-  *  - Keyboard and Mouse device demos (normal, data interrupt and fully interrupt driven) combined into unified keyboard and mouse demos

-  *  - Keyboard and Mouse host demos (normal and data interrupt driven) combined into unified keyboard and mouse demos

-  *  - Removed AVRISP_Programmer project due to code quality concerns

-  *  - Fixed CDC demo not sending an empty packet after each transfer to prevent the host from buffering incoming data

-  *  - Fixed documentation typos and preprocessor checks relating to misspellings of the USE_RAM_DESCRIPTORS token (thanks to Ian Gregg)

-  *  - Fixed USBTask.h not conditionally including HostChapter9.h only when USB_CAN_BE_HOST is defined (thanks to Ian Gregg)

-  *  - Fixed incorrect ADC driver init register manipulation (thanks to Tobias)

-  *  - Added new GenericHID device demo application

-  *  - Fixed Still Image Host SImage_SendData() function not clearing the pipe bank after sending data

-  *

-  *

-  *  \section Sec_ChangeLog090209 Version 090209

-  *

-  *  - PWM timer mode in AudioOut demo changed to Fast PWM for speed

-  *  - Updated Magstripe project to work with the latest hardware revision

-  *  - Fixed library not responding to the BCERRI flag correctly in host mode, leading to device lockups

-  *  - Fixed library handling Get Descriptor requests when not addressed as standard requests to the device or interface (thanks to

-  *    Nate Lawson)

-  *  - Fixed serious data corruption issue in MassStorage demo dataflash write routine

-  *  - Added new NO_CLEARSET_FEATURE_REQUEST compile time token

-  *  - USB task now restores previous global interrupt state after execution, rather than forcing global interrupts to be enabled

-  *  - Fixed USB_DeviceEnumerationComplete event firing after each configuration change, rather than once after the initial configuration

-  *  - Added ENDPOINT_DOUBLEBANK_SUPPORTED() macros to Endpoint.h, altered ENDPOINT_MAX_SIZE() to allow user to specify endpoint

-  *  - ENDPOINT_MAX_ENDPOINTS changed to ENDPOINT_TOTAL_ENDPOINTS, PIPE_MAX_PIPES changed to PIPE_TOTAL_PIPES

-  *  - Endpoint and Pipe non-control stream functions now ensure endpoint or pipe is ready before reading or writing

-  *  - Changed Teensy bootloader to use a watchdog reset when exiting rather than a software jump

-  *  - Fixed integer promotion error in MassStorage and MassStorageHost demos, corrupting read/write transfers

-  *  - SPI_SendByte is now SPI_TransferByte, added new SPI_SendByte and SPI_ReceiveByte functions for fast one-way transfer

-  *  - MassStorage demo changed to use new fast one-way SPI transfers to increase throughput

-  *  - MassStorage handling of Mass Storage Reset class request improved

-  *  - Altered MassStorage demo dataflash block read code for speed

-  *  - Added USB_IsSuspended global flag

-  *  - Simplified internal Dual Mode (OTG) USB library code to reduce code size

-  *  - Extended stream timeout period to 100ms from 50ms

-  *  - Mass Storage Host demo commands now all return an error code from the Pipe_Stream_RW_ErrorCodes_t enum

-  *  - Added SubErrorCode parameter to the USB_DeviceEnumerationFailed event

-  *  - VBUS drop interrupt now disabled during the manual-to-auto VBUS delivery handoff

-  *  - Simplified low level backend so that device/host mode initialization uses the same code paths

-  *  - Added workaround for faulty Mass Storage devices which do not implement the required GET_MAX_LUN request

-  *  - Removed buggy Telnet application from the RNDIS demo

-  *  - Moved Mass Storage class requests in the Mass Storage Host demo to wrapper functions in MassStoreCommands.c

-  *  - Fixed incorrect SCSI command size value in the Request Sense command in MassStoreCommands.c

-  *  - Added SetProtocol request to HID class non-parser Mouse and Keyboard demos to force devices to use the correct Boot Protocol

-  *  - Added new "dfu" and "flip" programming targets to project makefiles

-  *  - HID_PARSE_Sucessful enum member typo corrected to HID_PARSE_Successful

-  *  - Changed COLLECTION item structures in the HID descriptor parser to include the collection's Usage Page value

-  *  - Serial driver now sets Tx line as output, enables pullup on Rx line

-  *  - Fixed smaller USB AVRs raising multiple connection and disconnection events when NO_LIMITED_CONTROLLER_CONNECT is disabled

-  *  - Added HOST_DEVICE_SETTLE_DELAY_MS to give the host delay after a device is connected before it is enumerated

-  *  - Fixed KeyboardHostWithParser demo linking against the wrong global variables

-  *  - Completed doxygen documentation of remaining library bootloaders, demos and projects

-  *  - Fixed incorrect bootloader start address in the TeensyHID bootloader

-  *  - Added HWB button whole-disk ASCII dump functionality to MassStoreHost demo

-  *  - Replaced printf_P(PSTR("%c"), {Variable}) calls with putchar(<Variable>) for speed and size savings

-  *  - Serial driver now accepts baud rates over 16-bits in size, added double speed flag option

-  *  - Fixed incorrect callback abort return value in Pipe.c

-  *  - Added new flip-ee and dfu-ee makefile targets (courtesy of Opendous Inc.)

-  *  - Removed reboot-on-disconnect code from the TeensyHID bootloader, caused problems on some systems

-  *  - Fixed AudioOutput and AudioInput demos looping on the endpoint data, rather than processing a sample at a time and returning

-  *    each time the task runs to allow for other tasks to execute

-  *  - Added support for the Atmel ATAVRUSBRF01 board

-  *  - Added AVRISP Programmer Project, courtesy of Opendous Inc.

-  *  - Fixed CDC Host demo not searching through both CDC interfaces for endpoints

-  *  - Fixed incorrect Product String descriptor length in the DFU class bootloader

-  *

-  *

-  *  \section Sec_ChangeLog081224 Version 081224

-  *

-  *  - MyUSB name changed to LUFA, the Lightweight USB Framework for AVRs

-  *  - Fixed Mass Storage Host demo's MassStore_SendCommand() delay in the incorrect place

-  *  - Fixed USBtoSerial demo not calling ReconfigureUSART() after a change in the line encoding

-  *  - Fixed infinite loop in host mode Host-to-Device control transfers with data stages

-  *  - HID report parser now supports devices with multiple reports in one interface via Report IDs

-  *  - Fixed RZUSBSTICK board LED driver header incorrect macro definition order causing compile errors

-  *  - Calling USB_Init() when the USB interface is already configured now forces a complete interface reset

-  *    and re-enumeration - fixes MyUSB DFU bootloader not switching to app code correctly when soft reset used

-  *  - Fixed "No newline at end of file" warning when stream callbacks are enabled

-  *  - DFU bootloader now uses fixed signature bytes per device, rather than reading them out dynamically for size

-  *  - Added new FIXED_CONTROL_ENDPOINT_SIZE and USE_SINGLE_DEVICE_CONFIGURATION switches to statically define certain values to

-  *    reduce compiled binary size

-  *  - Added new NO_LIMITED_CONTROLLER_CONNECT switch to prevent the library from trying to determine bus connection

-  *    state from the suspension and wake up events on the smaller USB AVRs

-  *  - Added summary of all library compile time tokens to the documentation

-  *  - Added overview of the LUFA scheduler to the documentation

-  *  - Removed MANUAL_PLL_CONTROL compile time token, replaced with a mask for the USB_Init() Options parameter

-  *  - CDC bootloader now uses the correct non-far or far versions of the pgm_* functions depending on if RAMPZ is defined

-  *  - Doxygen documentation now contains documentation on all the projects, bootloaders and most demos included with the library

-  *  - CDC bootloader now runs user application when USB disconnected rather than waiting for a hard reset

-  *  - MouseHostWithParser and KeyboardHostWithParser now support multiple-report devices

-  *  - RNDIS demo can now close connections correctly using the new TCP_APP_CLOSECONNECTION() macro - used in Webserver  

-  *  - Fixed the DFU bootloader, no longer freezes up when certain files are programmed into an AVR, made reading/writing faster

-  *  - Fixed mouse/joystick up/down movements reversed - HID mouse X/Y coordinates use a left-handed coordinate system, not a normal 

-  *    right-handed system

-  *  - Added stub code to the CDC and USBtoSerial demos showing how to read and set the RS-232 handshake lines - not currently used in

-  *    the demos, but the example code and supporting defines are now in place

-  *  - Interrupts are now disabled when processing a control request in device mode, to avoid exceeding the strict control request

-  *    timing requirements.

-  *  - All demos now use a central StatusUpdate() function rather than direct calls to the board LED functions, so that the demos can

-  *    easily be altered to show different LED combinations (or do something else entirely) as the demo's status changes

-  *  - Removed LED commands from the CDC bootloader, unused by most AVR910 programming software

-  *  - Fixed RNDIS demo ICMP ping requests echoing back incorrect data

-  *  - Added DHCP server code to RNDIS demo, allowing for hands-free auto configuration on any PC

-  *  - Fixed DFU bootloader PID value for the ATMEGA16U4 AVR

-  *  - Endpoint and Pipe configuration functions now return an error code indicating success or failure

-  *  - USB Reset in device mode now resets and disables all device endpoints

-  *  - Added intermediate states to the host mode state machine, reducing the USB task blocking time to no more than 1ms explicitly per

-  *    invocation when in host mode

-  *  - Added support for the ATMEGA32U6 microcontroller

-  *  - Added STATIC_ENDPOINT_CONFIGURATION compile time option, enabled in the bootloaders to minimize space usage

-  *  - Removed redundant code from the USB device GetStatus() chapter 9 processing routine

-  *  - Added new TeensyHID bootloader, compatible with the Teensy HID protocol (http://www.pjrc.com/teensy/)

-  *  - Versions are now numbered by release dates, rather than arbitrary major/minor revision numbers

-  *  - USB_RemoteWakeupEnabled is now correctly set and cleared by SetFeature and ClearFeature requests from the host

-  *  - Changed prototype of GetDescriptor, so that it now returns the descriptor size (or zero if the descriptor doesn't exist)

-  *    rather than passing the size back to the caller through a parameter and returning a boolean

-  *

-  *

-  *  \section Sec_ChangeLog153 Version 1.5.3 - Released 2nd October, 2008

-  *

-  *  - Fixed CDC bootloader using pgmspace macros for some descriptors inappropriately

-  *  - Updated all Mouse and Keyboard device demos to include boot protocol support (now works in BIOS)

-  *  - Renamed bootloader directories to remove spaces, which were causing build problems on several OSes

-  *  - Removed serial number strings from all but the MassStore demo where it is required - users were not

-  *    modifying the code to either omit the descriptor or use a unique serial per device causing problems

-  *    when multiple units of the same device were plugged in at the same time

-  *  - AudioOutput and AudioInput demos now correctly silence endpoints when not enabled by the host

-  *  - Added KeyboardMouse demo (Keyboard and Mouse functionality combined into a single demo)

-  *  - Added DriverStubs directory to house board level driver templates, to make MyUSB compatible custom board

-  *    driver creation easier

-  *  - Extended MassStorage demo to support multiple LUNs, 2 by default

-  *  - Fixed incorrect device address mask, preventing the device from enumerating with addresses larger than 63

-  *  - Fixed incorrect data direction mask in the GetStatus standard request, preventing it from being handled

-  *  - Fixed incorrect GetStatus standard request for endpoints, now returns the endpoint STALL status correctly

-  *  - Added in new USB_RemoteWakeupEnabled and USB_CurrentlySelfPowered flags rather than using fixed values

-  *  - Added DualCDC demo to demonstrate the use of Interface Association Descriptors

-  *  - Added pipe NAK detection and clearing API

-  *  - Added pipe status change (NAK, STALL, etc.) interrupt API

-  *  - Fixed MassStorageHost demo so that it no longer freezes randomly when issuing several commands in a row

-  *  - Host demos configuration descriptor routines now return a unique error code when the returned data does

-  *    not have a valid configuration descriptor header

-  *  - Added Endpoint_WaitUntilReady() and Pipe_WaitUntilReady() functions

-  *  - Stream functions now have software timeouts, timeout period can be set by the USB_STREAM_TIMEOUT_MS token

-  *  - All demos now pass the USB.org automated Chapter 9 device compliance tests

-  *  - All HID demos now pass the USB.org automated HID compliance tests

-  *  - Polling interval of the interrupt endpoint in the CDC based demos changed to 0xFF to fix problems on Linux systems

-  *  - Changed stream functions to accept a new callback function, with NO_STREAM_CALLBACKS used to disable all callbacks

-  *  - Mass Storage demo dataflash management routines changed to use the endpoint stream functions		

-  *  - Added AVRStudio project files for each demo in addition to the existing Programmer's Notepad master project file

-  *  - Re-added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes

-  *    are reflected in the hardware (change was previously lost)

-  *

-  *

-  *  \section Sec_ChangeLog152 Version 1.5.2 - Released 31st July, 2008

-  *

-  *  - Fixed SwapEndian_32() function in Common.h so that it now works correctly (wrong parameter types)

-  *  - Updated RNDIS demo - notification endpoint is no longer blocking so that it works with faulty Linux RNDIS

-  *    implementations (where the notification endpoint is ignored in favour of polling the control endpoint)

-  *  - Fixed incorrect Vendor Description string return size in RNDIS demo for the OID_GEN_VENDOR_DESCRIPTION OID token

-  *  - Added very basic TCP/IP stack and HTTP/TELNET servers to RNDIS demo

-  *  - Fixed DFU bootloader exit causing programming software to complain about failed writes

-  *  - Fixed DFU bootloader EEPROM programming mode wiping first flash page

-  *  - Fixed Clear/Set Feature device standard request processing code (fixing MassStorage demo in the process)

-  *  - Added support for the ATMEGA16U4 AVR microcontroller

-  *  - Library licence changed from LGPLv3 to MIT license

-  *

-  *

-  *  \section Sec_ChangeLog151 Version 1.5.1 - Released 31st July, 2008

-  *

-  *  - Changed host demos to enable the host function task on the firing of the USB_DeviceEnumerationComplete event

-  *    rather than the USB_DeviceAttached event

-  *  - HID Usage Stack now forcefully cleared after an IN/OUT/FEATURE item has been completely processed to remove

-  *    any referenced but not created usages

-  *  - Changed USB_INT_DisableAllInterrupts() and USB_INT_ClearAllInterrupts(), USB_Host_GetNextDescriptorOfType(),

-  *    USB_Host_GetNextDescriptorOfTypeBefore(), USB_Host_GetNextDescriptorOfTypeAfter() to normal functions (from inline)

-  *  - Fixed USBtoSerial demo not sending data, only receiving

-  *  - Fixed main makefile to make all by default, fixed MagStripe directory case to prevent case-sensitive path problems

-  *  - ConfigDescriptor functions made normal, instead of static inline

-  *  - Pipe/Endpoint *_Ignore_* functions changed to *_Discard_*, old names still present as aliases

-  *  - Fixed ENDPOINT_MAX_SIZE define to be correct on limited USB controller AVRs

-  *  - Changed endpoint and pipe size translation routines to use previous IF/ELSE IF cascade code, new algorithmic

-  *    approach was buggy and caused problems

-  *  - Bootloaders now compile with -fno-inline-small-functions option to reduce code size

-  *  - Audio demos now use correct endpoint sizes for full and limited controller USB AVRs, double banking in all cases

-  *    to be in line with the specification (isochronous endpoints MUST be double banked)

-  *  - Added Interface Association descriptor to StdDescriptors.h, based on the relevant USB2.0 ECN

-  *  - Fixed MIDI demo, corrected Audio Streaming descriptor to follow the MIDI-specific AS structure

-  *  - Fixed HID class demo descriptors so that the HID interface's protocol is 0x00 (required for non-boot protocol HID

-  *    devices) to prevent problems on hosts expecting the boot protocol functions to be supported

-  *  - Added read/write control stream functions to Endpoint.h

-  *  - Fixed AudioOut demo not setting port pins to inputs on USB disconnect properly

-  *  - Added RNDISEthernet demo application

-  *

-  *

-  *  \section Sec_ChangeLog150 Version 1.5.0 - Released 10 June, 2008

-  *

-  *  - Fixed MIDI demo, now correctly waits for the endpoint to be ready between multiple note messages

-  *  - Added CDC Host demo application

-  *  - Added KeyboardFullInt demo application

-  *  - Endpoint and Pipe creation routines now mask endpoint/pipe size with the size mask, to remove transaction

-  *    size bits not required for the routines (improves compatibility with devices)

-  *  - Fixed AudioInput demo - now correctly sends sampled audio to the host PC

-  *  - Fixed AudioOutput demo once more -- apparently Windows requires endpoint packets to be >=192 bytes

-  *  - Shrunk round-robbin scheduler code slightly via the use of struct pointers rather than array indexes

-  *  - Fixed off-by-one error when determining if the Usage Stack is full inside the HID Report parser

-  *  - Renamed Magstripe.h to MagstripeHW.h and moved driver out of the library and into the MagStripe demo folder

-  *  - Added preprocessor checks to enable C linkage on the library components when used with a C++ compiler

-  *  - Added Still Image Host demo application

-  *  - The USB device task now restores the previously selected endpoint, allowing control requests to be transparently

-  *    handled via interrupts while other endpoints are serviced through polling

-  *  - Fixed device signature being sent in reverse order in the CDC bootloader

-  *  - Host demos now have a separate ConfigDescriptor.c/.h file for configuration descriptor processing

-  *  - HostWithParser demos now have a separate HIDReport.c/.h file for HID report processing and dumping

-  *  - Removed non-mandatory commands from MassStorage demo to save space, fixed SENSE ResponseCode value

-  *  - CDC demos now send empty packets after sending a full one to prevent buffering issues on the host

-  *  - Updated demo descriptors to use VID/PID values donated by Atmel

-  *  - Added DoxyGen documentation to the source files

-  *  - Fixed Serial_IsCharReceived() definition, was previously reversed

-  *  - Removed separate USB_Descriptor_Language_t descriptor, USB_Descriptor_String_t is used instead

-  *  - Removed unused Device Qualifier descriptor structure

-  *  - Renamed the USB_CreateEndpoints event to the more appropriate USB_ConfigurationChanged

-  *  - Fixed MassStorageHost demo reading in the block data in reverse

-  *  - Removed outdated typedefs in StdRequestType.h, superseded by the macro masks

-  *  - Corrected OTG.h is now included when the AVR supports both Host and Device modes, for creating OTG products

-  *  - USB_DeviceEnumerationComplete event is now also fired when in device mode and the host has finished its enumeration

-  *  - Interrupt driven demos now properly restore previously selected endpoint when ISR is complete

-  *  - USB_HOST_TIMEOUT_MS is now overridable in the user project makefile to a custom fixed timeout value

-  *  - Renamed USB_Host_SOFGeneration_* macros to more friendly USB_Host_SuspendBus(), USB_Host_ResumeBus()

-  *    and USB_Host_IsBusSuspended()

-  *  - Renamed *_*_Is* macros to *_Is* to make all flag checking macros consistent, Pipe_SetInterruptFreq() is now

-  *    Pipe_SetInterruptPeriod() to use the correct terminology

-  *  - UnicodeString member of USB_Descriptor_String_t struct changed to an ordinary int array type, so that the GCC

-  *    Unicode strings (prefixed with an L before the opening quotation mark) can be used instead of explicit arrays

-  *    of ASCII characters

-  *  - Fixed Endpoint/Pipes being configured incorrectly if the maximum endpoint/pipe size for the selected USB AVR

-  *    model was given as the bank size

-  *  - HID device demos now use a true raw array for the HID report descriptor rather than a struct wrapped array

-  *  - Added VERSION_BCD() macro, fixed reported HID and USB version numbers in demo descriptors

-  *  - Cleaned up GetDescriptor device chapter 9 handler function

-  *  - Added GET_REPORT class specific request to HID demos to make them complaint to the HID class

-  *  - Cleaned up setting of USB_IsInitialized and USB_IsConnected values to only when needed

-  *  - Removed Atomic.c and ISRMacro.h; the library was already only compatible with recent avr-lib-c for other reasons

-  *  - All demos and library functions now use USB standardized names for the USB data (bRequest, wLength, etc.)

-  *  - Added USE_NONSTANDARD_DESCRIPTOR_NAMES token to switch back to the non-standard descriptor element names

-  *

-  *

-  *  \section Sec_ChangeLog141 Version 1.4.1 - Released 5 May, 2008

-  *

-  *  - Enhanced KeyboardWithParser demo, now prints out pressed alphanumeric characters like the standard demo

-  *  - Fixed MassStorage demo, read/writes using non mode-10 commands now work correctly

-  *  - Corrected version number in Version.h

-  *

-  *

-  *  \section Sec_ChangeLog140 Version 1.4.0 - Released 5 May, 2008

-  *

-  *  - Added HID Report Parser API to the library

-  *  - Added Mouse and Keyboard host demo applications, using the new HID report parser engine

-  *  - Added MouseFullInt demo, which demonstrates a fully interrupt (including control requests) mouse device

-  *  - Fixed incorrect length value in the audio control descriptor of the AudioOutput and AudioInput demos

-  *  - Added MIDI device demo application to the library

-  *  - Fixed problem preventing USB devices from being resumed from a suspended state

-  *  - Added new CDC class bootloader to the library, based on the AVR109 bootloader protocol

-  *  - Added header to each demo application indicating the mode, class, subclass, standards used and supported speed

-  *  - Functions expecting endpoint/pipe numbers are no longer automatically masked against ENDPOINT_EPNUM_MASK or

-  *    PIPE_PIPENUM_MASK - this should be manually added to code which requires it

-  *  - Fixed DFU class bootloader - corrected frequency of flash page writes, greatly reducing programming time

-  *  - Renamed AVR_HOST_GetDeviceConfigDescriptor() to USB_Host_GetDeviceConfigDescriptor() and AVR_HOST_GetNextDescriptor()

-  *    to USB_Host_GetNextDescriptor()

-  *  - Added new USB_Host_GetNextDescriptorOfTypeBefore() and USB_Host_GetNextDescriptorOfTypeAfter() routines

-  *  - Moved configuration descriptor routines to MyUSB/Drivers/USB/Class/, new accompanying ConfigDescriptors.c file

-  *  - Added new configuration descriptor comparator API for more powerful descriptor parsing, updated host demos to use the

-  *    new comparator API

-  *  - Fixed MassStorageHost demo capacity printout, and changed data read/write mode from little-endian to the correct

-  *    big-endian for SCSI devices

-  *  - Fixed macro/function naming consistency; USB_HOST is now USB_Host, USB_DEV is now USB_Device

-  *  - Added better error reporting to host demos

-  *  - Added 10 microsecond delay after addressing devices in host mode, to prevent control stalls

-  *

-  *

-  *  \section Sec_ChangeLog132 Version 1.3.2 - Released April 1st, 2008

-  *

-  *  - Added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes

-  *    are reflected in the hardware

-  *  - Fixed CDC and USBtoSerial demos - Stream commands do not work for control endpoints, and the 

-  *    GetLineCoding request had an incorrect RequestType mask preventing it from being processed

-  *  - Improved reliability of the USBtoSerial demo, adding a busy wait while the buffer is full

-  *  - Device control endpoint size is now determined from the device's descriptors rather than being fixed

-  *  - Separated out SPI code into new SPI driver in AT90USBXXX driver directory

-  *  - Bootloader now returns correct PID for the selected USB AVR model, not just the AT90USB128X PID

-  *  - Added support for the RZUSBSTICK board

-  *  - Bicolour driver removed in favour of generic LEDs driver

-  *  - Added support for the ATMEGA32U4 AVR

-  *  - Added MANUAL_PLL_CONTROL compile time option to prevent the USB library from manipulating the PLL

-  *

-  *

-  *  \section Sec_ChangeLog131 Version 1.3.1 - Released March 19th 2008

-  *

-  *  - Fixed USB to Serial demo - class value in the descriptors was incorrect

-  *  - Control endpoint size changed from 64 bytes to 8 bytes to save on USB FIFO RAM and to allow low

-  *    speed mode devices to enumerate properly

-  *  - USB to Serial demo data endpoints changed to dual-banked 16 byte to allow the demo to work

-  *    on USB AVRs with limited USB FIFO RAM

-  *  - Changed demo endpoint numbers to use endpoints 3 and 4 for double banking, to allow limited

-  *    USB device controller AVRs (AT90USB162, AT90USB82) to function correctly

-  *  - Updated Audio Out demo to use timer 1 for AVRs lacking a timer 3 for the PWM output

-  *  - Fixed incorrect USB_DEV_OPT_HIGHSPEED entry in the Mass Storage device demo makefile

-  *  - Optimized Mass Storage demo for a little extra transfer speed

-  *  - Added LED indicators to the Keyboard demo for Caps Lock, Num Lock and Scroll Lock

-  *  - Added Endpoint_Read_Stream, Endpoint_Write_Stream, Pipe_Read_Stream and Pipe_Write_Stream functions

-  *    (including Big and Little Endian variants)

-  *  - Made Dataflash functions inline for speed, removed now empty Dataflash.c driver file

-  *  - Added new SetSystemClockPrescaler() macro (thanks to Joerg Wunsch)

-  *  - Fixed Endpoint_ClearStall() to function correctly on full USB controller AVRs (AT90USBXXX6/7)

-  *  - Endpoint_Setup_In_Clear() and Endpoint_Setup_Out_Clear() no longer set FIFOCON, in line with the

-  *    directives in the datasheet

-  *  - Fixed PLL prescaler defines for all AVR models and frequencies

-  *  - Fixed ENDPOINT_INT_IN and ENDPOINT_INT_OUT definitions

-  *  - Added interrupt driven keyboard and mouse device demos

-  *  - Combined USB_Device_ClearFeature and USB_Device_SetFeature requests into a single routine for code

-  *    size savings

-  *  - Added missing Pipe_GetCurrentPipe() macro to Pipe.h

-  *

-  *

-  *  \section Sec_ChangeLog130 Version 1.3.0 - Released March 7th 2008

-  *

-  *  - Unnecessary control endpoint config removed from device mode

-  *  - Fixed device standard request interpreter accidentally processing some class-specific requests

-  *  - Added USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS compile time options to instruct the library

-  *    to use descriptors stored in RAM or EEPROM rather than flash memory

-  *  - All demos now disable watchdog on startup, in case it has been enabled by fuses or the bootloader

-  *  - USB_DEV_OPT_LOWSPEED option now works correctly

-  *  - Added ability to set the USB options statically for a binary size reduction via the USE_STATIC_OPTIONS

-  *    compile time define

-  *  - USB_Init no longer takes a Mode parameter if compiled for a USB device with no host mode option, or

-  *    if forced to a particular mode via the USB_HOST_ONLY or USB_DEVICE_ONLY compile time options

-  *  - USB_Init no longer takes an Options parameter if options statically configured by USE_STATIC_OPTIONS

-  *  - Endpoint_Ignore_* and Pipe_Ignore_* made smaller by making the dummy variable non-volatile so that the

-  *    compiler can throw away the result more efficiently

-  *  - Added in an optional GroupID value to each scheduler entry, so that groups of tasks can once again be

-  *    controlled by the new Scheduler_SetGroupTaskMode() routine

-  *  - Added support for AT90USB162 and AT90USB82 AVR models

-  *  - Added support for the STK525 and STK526 boards

-  *  - Added support for custom board drivers to be supplied by selecting the board type as BOARD_USER, and

-  *    placing board drivers in {Application Directory}/Board/

-  *  - PLL is now stopped and USB clock is frozen when detached from host in device mode, to save power

-  *  - Joystick defines are now in synch with the schematics - orientation will be rotated for the USBKEY

-  *  - Fixed USB_DEV_IsUSBSuspended() - now checks the correct register

-  *  - Fixed data transfers to devices when in host mode

-  *  - Renamed USB_DEV_OPT_HIGHSPEED to USB_DEV_OPT_FULLSPEED and USB_HOST_IsDeviceHighSpeed() to

-  *    USB_HOST_IsDeviceFullSpeed() to be in line with the official USB speed names (to avoid confusion with

-  *    the real high speed mode, which is unavailable on the USB AVRs)

-  *

-  *

-  *  \section Sec_ChangeLog120 Version 1.2.0 - Released February 4th, 2008

-  *

-  *  - Added USB_DeviceEnumerationComplete event for host mode

-  *  - Added new Scheduler_Init routine to preprepare the scheduler, so that tasks can be started and

-  *    stopped before the scheduler has been started (via Scheduler_Start)

-  *  - Connection events in both Device and Host mode are now interrupt-driven, allowing the USB management

-  *    task to be stopped when the USB is not connected to a host or device

-  *  - All demos updated to stop the USB task when not in use via the appropriate USB events

-  *  - Mass Storage Host demo application updated to function correctly with all USB flash disks

-  *  - Mass Storage Host demo application now prints out the capacity and number of LUNs in the attached

-  *    device, and prints the first block as hexadecimal numbers rather than ASCII characters

-  *  - Endpoint and Pipe clearing routines now clear the Endpoint/Pipe interrupt and status flags

-  *  - Shifted error handling code in the host enum state machine to a single block, to reduce code complexity

-  *  - Added in DESCRIPTOR_TYPE, DESCRIPTOR_SIZE and DESCRIPTOR_CAST macros to make config descriptor processing

-  *    clearer in USB hosts and DESCRIPTOR_ADDRESS for convenience in USB devices

-  *  - Added in alloca macro to common.h, in case the user is using an old version of avr-lib-c missing the macro

-  *

-  *

-  *  \section Sec_ChangeLog130 Version 1.1.0 - Released January 25th 2008

-  *

-  *  - Fixed DCONNI interrupt being enabled accidentally after a USB reset

-  *  - Fixed DDISCI interrupt not being disabled when a device is not connected

-  *  - Added workaround for powerless pullup devices causing false disconnect interrupts

-  *  - Added USB_DeviceEnumerationFailed event for Host mode

-  *  - AVR_HOST_GetDeviceConfigDescriptor routine no longer modifies ConfigSizePtr if a valid buffer

-  *    pointer is passed

-  *  - Added ALLOCABLE_BYTES to DynAlloc, and added code to make the size of key storage variables

-  *    dependant on size of memory parameters passed in via the user project's makefile

-  *  - Fixed incorrect device reset routine being called in USBTask

-  *  - Devices which do not connect within the standard 300mS are now supported

-  *  - Removed incorrect ATTR_PURE from Scheduler_SetTaskMode(), which was preventing tasks from being

-  *    started/stopped, as well as USB_InitTaskPointer(), which was breaking dual device/host USB projects

-  *  - Changed scheduler to use the task name rather than IDs for setting the task mode, eliminating the

-  *    need to have a task ID list

-  *  - ID transistion interrupt now raises the appropriate device/host disconnect event if device attached

-  *  - Fixed double VBUS change (and VBUS -) event when detatching in device mode

-  *  - Added ability to disable ANSI terminal codes by the defining of DISABLE_TERMINAL_CODES in makefile

-  *  - Removed return from ConfigurePipe and ConfigureEndpoint functions - use Pipe_IsConfigured() and 

-  *    Endpoint_IsConfigured() after calling the config functions to determine success

-  */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+ /** \page Page_ChangeLog Project Changelog
+  *
+  *  \section Sec_ChangeLogXXXXXX Version XXXXXX
+  *
+  *  <b>New:</b>
+  *  - Added incomplete MIDIToneGenerator project
+  *  - Added new Relay Controller Board project (thanks to OBinou)
+  *  - Added board hardware driver support for the Teensy, USBTINY MKII, Benito and JM-DB-U2 lines of third party USB AVR boards
+  *  - Added new ATTR_NO_INIT variable attribute for global variables that should not be automatically cleared on startup
+  *  - Added new ENDPOINT_*_BusSuspended error code to the Endpoint function, so that the stream functions early-abort if the bus
+  *    is suspended before or during a transfer
+  *  - Added new EVENT_CDC_Device_BreakSent() event and CDC_Host_SendBreak() function to the Device and Host CDC Class drivers
+  *
+  *  <b>Changed:</b>
+  *  - AVRISP programmer project now has a more robust timeout system
+  *  - Added a timeout value to the TWI_StartTransmission() function, within which the addressed device must respond
+  *  - Webserver project now uses the board LEDs to indicate the current IP configuration state
+  *  - Added ENABLE_TELNET_SERVER compile time option to the Webserver project to disable the TELNET server if desired
+  *  - Increased throughput of the USBtoSerial demo on systems that send multiple bytes per packet (thanks to Opendous Inc.)
+  *  - Double bank CDC endpoints in the XPLAIN Bridge project, re-enable JTAG once the mode selection pin has been sampled.
+  *  - Standardized the naming scheme given to configuration descriptor sub-elements in the Device mode demos, bootloaders
+  *    and projects
+  *  - All Class Driver Host mode demos now correctly set the board LEDs to READY once the enumeration process has completed
+  *  - Added LIBUSB_FILTERDRV_COMPAT compile time option to the AVRISP programmer project to make the code compatible with Windows
+  *    builds of avrdude at the expense of AVRStudio compatibility
+  *  - Removed two-step endpoint/pipe bank clear and switch sequence for smaller, faster endpoint/pipe code
+  *  - The USB_Init() function no longer calls sei() - the user is now responsible for enabling interrupts when they are ready
+  *    for them to be enabled (thanks to Andrei Krainev)
+  *  - The Audio_Device_IsSampleReceived() and Audio_Device_IsReadyForNextSample() functions are now inline, to reduce overhead
+  *  - Removed the cast to uint16_t on the set baud rate in the USBtoSerial project, so that the higher >1M baud rates can be
+  *    selected (thanks to Steffan Woltjer)
+  *  - Removed software PDI and TPI emulation from the AVRISP-MKII clone project as it was very buggy and slow - PDI and TPI must
+  *    now be implemented via seperate programming headers
+  *  - The CDC class bootloader now uses a watchdog reset rather than a soft-reset when exited to ensure that all hardware is
+  *    properly reset to their defaults
+  *  - Device mode class driver callbacks are now fired before the control request status stage is sent to prevent the host from
+  *    timing out if another request is immediately fired and the device has a lengthy callback routine
+  *
+  *  <b>Fixed:</b>
+  *  - Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin
+  *  - Fixed TWI_StartTransmission() corrupting the contents of the GPIOR0 register
+  *  - Fixed TWI driver not aborting when faced with no response after attempting to address a device on the bus
+  *  - Fixed ADC routines not correctly returning the last result when multiple channels were read
+  *  - Fixed ADC routines failing to read the extended channels (Channels 8 to 13, Internal Temperature Sensor) on the
+  *    U4 series USB AVR parts
+  *  - Fixed LowLevel MassStorage demo broken on the U2 series USB AVRs due to unsupported double-banked endpoint modes used
+  *  - Fixed compilation error in the AudioInput demos when MICROPHONE_BIASED_TO_HALF_RAIL is defined (thanks to C. Scott Ananian)
+  *  - Fixed incorrect definition of HID_ALIGN_DATA() causing incorrect HID report item data alignment
+  *  - Fixed Still Image Host class driver not resetting the transaction ID when a new session is opened, fixed driver not sending
+  *    a valid session ID to the device
+  *  - Removed invalid dfu and flip related targets from the bootloaders - bootloaders can only be replaced with an external programmer
+  *  - Fixed Set/Clear Feature requests directed to a non-configured endpoint not returning a stall to the host
+  *  - Fixed HID Device Class Driver not allocating a temporary buffer when the host requests a report via the control endpoint and the
+  *    user has set the PrevReportINBuffer driver configuration element to NULL (thanks to Lars Noschinski)
+  *  - Fixed device state not being reset to DEVICE_STATE_Default if the host sets a 0x00 device address
+  *  - Fixed device not stalling configuration requests before the device's address has been set
+  *  - Fixed possibility of internal signature retrieval being corrupted if an interrupt occurs during a signature byte
+  *    read (thanks to Andrei Krainev)
+  *  - Fixed device state not being reset back to the default state if the host sets the address to 0
+  *  - Fixed Set Configuration requests not being stalled until the host has set the device's address
+  *  - Fixed Host mode HID class driver not sending the correct report type when HID_Host_SendReportByID() was called and the 
+  *    HID_HOST_BOOT_PROTOCOL_ONLY compile time option is set
+  *  - Fixed INTERRUPT_CONTROL_ENDPOINT compile time option preventing other interrupts from occuring while the control endpoint
+  *    request is being processed, causing possible lockups if a USB interrupt occurs during a transfer
+  *  - Fixed TeensyHID bootloader not working on some USB AVR models with the official TeensyLoader GUI application
+  *  - Remove incorrect Abstract Call Management class specific descriptor from the CDC demos, bootloaders and projects
+  *
+  *  \section Sec_ChangeLog100219 Version 100219
+  *
+  *  <b>New:</b>
+  *  - Added TPI programming support for 6-pin ATTINY devices to the AVRISP programmer project (thanks to Tom Light)
+  *  - Added command timeout counter to the AVRISP project so that the device no longer freezes when incorrectly connected
+  *    to a target
+  *  - Added new TemperatureDataLogger application, a USB data logger which writes to the device's dataflash and appears to
+  *    the host as a standard Mass Storage device when inserted
+  *  - Added MIDI event packing support to the MIDI Device and Host mode Class drivers, allowing for multiple MIDI events to
+  *    sent or received in packed form in a single USB packet
+  *  - Added new MIDI send buffer flush routines to the MIDI Device and Host mode Class drivers, to flush packed events
+  *  - Added master mode hardware TWI driver for easy TWI peripheral control
+  *  - Added ADC MUX masks for the standard ADC input channels on all AVR models with an ADC, altered demos to use these masks
+  *    as on some models, the channel number is not identical to its single-ended ADC MUX mask
+  *  - New Webserver project, a RNDIS host USB webserver using the open source uIP TCP/IP network stack and FatFS library
+  *  - New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which
+  *    do not adversely affect the code operation (currently only the LEDs driver)
+  *  - Added keyboard modifier masks (HID_KEYBOARD_MODIFER_*) and LED report masks (KEYBOARD_LED_*) to the HID class driver and
+  *    Keyboard demos
+  *  - Added .5MHz recovery clock to the AVRISP programmer project when in ISP programming mode to correct mis-set fuses
+  *
+  *  <b>Changed:</b>
+  *  - Slowed down software USART carried PDI programming in the AVRISP project to prevent transmission errors
+  *  - Renamed the AVRISP project folder to AVRISP-MKII to reduce confusion
+  *  - Renamed the RESET_LINE_* makefile tokens in the AVRISP MKII Project to AUX_LINE_*, as they are not always used for target
+  *    reset
+  *  - Changed over the MassStorageKeyboard Class driver device demo to use Start of Frame events rather than a timer to keep track
+  *    of elapsed milliseconds
+  *  - Inlined currently unused (but standardized) maintenance functions in the Device and Host Class drivers to save space
+  *  - The XPLAINBridge project now selects between a USB to Serial bridge and a PDI programmer on startup, reading the JTAG port's
+  *    TDI pin to determine which mode to use
+  *  - Removed the stream example code from the Low Level VirtualSerial demos, as they were buggy and only served to add clutter
+  *
+  *  <b>Fixed:</b>
+  *  - Fixed AVRISP project not able to enter programming mode when ISP protocol is used
+  *  - Fixed AVRISP PDI race condition where the guard time between direction changes could be interpreted as a start bit
+  *  - Fixed ADC_IsReadingComplete() returning an inverted result
+  *  - Fixed blocking CDC streams not aborting when the host is disconnected
+  *  - Fixed XPLAIN board Dataflash driver broken due to incorrect preprocessor commands
+  *  - Fixed inverted XPLAIN LED driver output (LED turned on when it was supposed to be turned off, and vice-versa)
+  *  - Fixed Class Driver struct interface numbers in the KeyboardMouse and VirtualSerialMouse demos (thanks to Renaud Cerrato)
+  *  - Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers
+  *  - Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders
+  *  - Fixed Benito project not resetting the target AVR automatically when programming has completed
+  *  - Fixed DFU bootloader programming not discarding the correct number of filler bytes from the host when non-aligned programming
+  *    ranges are specified (thanks to Thomas Bleeker)
+  *  - Fixed CDC and RNDIS host demos and class drivers - bidirectional endpoints should use two seperate pipes, not one half-duplex pipe
+  *  - Fixed Pipe_IsEndpointBound() not taking the endpoint's direction into account
+  *  - Fixed EEPROM and FLASH ISP programming in the AVRISP project
+  *  - Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and USB_CONFIG_ATTR_REMOTEWAKEUP tokens (thanks to Claus Christensen)
+  *  - Fixed SerialStream driver blocking while waiting for characters to be received instead of returning EOF
+  *  - Fixed SerialStream driver not setting stdin to the created serial stream (thanks to Mike Alexander)
+  *  - Fixed USB_GetHIDReportSize() returning the number of bits in the specified report instead of bytes
+  *  - Fixed AVRISP project not extending the command delay after each successful page/word/byte program
+  *  - Fixed accuracy of the SERIAL_UBBRVAL() and SERIAL_2X_UBBRVAL() macros for higher baudrates (thanks to Renaud Cerrato)
+  *
+  *  \section Sec_ChangeLog091223 Version 091223
+  *
+  *  <b>New:</b>
+  *  - Added activity LED indicators to the AVRISP project to indicate when the device is busy processing a command
+  *  - The USB target family and allowable USB mode tokens are now public and documented (USB_CAN_BE_*, USB_SERIES_*_AVR)
+  *  - Added new XPLAIN USB to Serial Bridge project (thanks to John Steggall for initial proof-of-concept, David Prentice
+  *    and Peter Danneger for revised software USART code)
+  *  - Added new RNDIS Ethernet Host LowLevel demo
+  *  - Added new RNDIS Ethernet Host Class Driver
+  *  - Added new RNDIS Ethernet Host ClassDriver demo
+  *  - Added CDC_Host_Flush() function to the CDC Host Class driver to flush sent data to the attached device
+  *  - Added PDI programming support for XMEGA devices to the AVRISP programmer project (thanks to Justin Mattair)
+  *  - Added support for the XPLAIN board Dataflash, with new XPLAIN_REV1 board target for the different dataflash used
+  *    on the first revision boards compared to the one mounted on later revisions
+  *  - Added new HID_ALIGN_DATA() macro to return the pre-retrieved value of a HID report item, left-aligned to a given datatype
+  *  - Added new PreviousValue to the HID Report Parser report item structure, for easy monitoring of previous report item values
+  *  - Added new EVK527 board target
+  *  - Added new USB_Host_GetDeviceStringDescriptor() convenience function
+  *  - Added new LEDNotification project to the library, to give a visual LED notification on new events from the host
+  *  - Added new NO_DEVICE_REMOTE_WAKEUP and NO_DEVICE_SELF_POWER compile time options
+  *
+  *  <b>Changed:</b>
+  *  - Removed code in the Keyboard demos to send zeroed reports between two reports with differing numbers of keycodes
+  *    as this relied on non-standard OS driver behaviour to repeat key groups
+  *  - The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class
+  *    driver common defines, rather than being defined in the Host mode Class driver section only
+  *  - The USB_MODE_HOST token is now defined even when host mode is not available
+  *  - The CALLBACK_HID_Device_CreateHIDReport() HID Device Class driver callback now has a new ReportType parameter to
+  *    indicate the report type to generate
+  *  - All Class Drivers now return false or the "DeviceDisconnected" error code of their respective error enums when a function
+  *    is called when no host/device is connected where possible
+  *  - The HOST_SENDCONTROL_DeviceDisconnect enum value has been renamed to HOST_SENDCONTROL_DeviceDisconnected to be in line
+  *    with the rest of the library errorcodes
+  *  - Make MIDI device demos also turn off the on board LEDs if MIDI Note On messages are sent with a velocity of zero,
+  *    which some devices use instead of Note Off messages (thanks to Robin Green)
+  *  - The CDC demos are now named "VirtualSerial" instead to indicate the demos' function rather than its implemented USB class,
+  *    to reduce confusion and to be in line with the rest of the LUFA demos
+  *  - The SImage_Host_SendBlockHeader() and SImage_Host_ReceiveBlockHeader() Still Image Host Class driver functions are now public
+  *
+  *  <b>Fixed:</b>
+  *  - Added missing CDC_Host_CreateBlockingStream() function code to the CDC Host Class driver
+  *  - Fixed incorrect values for REPORT_ITEM_TYPE_* enum values causing corrupt data in the HID Host Parser
+  *  - Fixed misnamed SI_Host_USBTask() and SI_Host_ConfigurePipes() functions
+  *  - Fixed broken USB_GetNextDescriptor() function causing the descriptor to jump ahead double the expected amount
+  *  - Fixed Pipe_IsEndpointBound() not masking the given Endpoint Address against PIPE_EPNUM_MASK
+  *  - Fixed host state machine not enabling Auto VBUS mode when HOST_DEVICE_SETTLE_DELAY_MS is set to zero
+  *  - Fixed misnamed Pipe_SetPipeToken() macro for setting a pipe's direction
+  *  - Fixed CDCHost failing on devices with bidirectional endpoints
+  *  - Fixed USB driver failing to define the PLL prescaler mask for the ATMEGA8U2 and ATMEGA16U2
+  *  - Fixed HID Parser not distributing the Usage Min and Usage Max values across an array of report items
+  *  - Fixed Mass Storage Host Class driver and Low Level demo not clearing the error condition if an attached device returns a
+  *    STALL to a GET MAX LUN request (thanks to Martin Luxen)
+  *  - Fixed TeensyHID bootloader not properly shutting down the USB interface to trigger a disconnection on the host before resetting
+  *  - Fixed MassStorageHost Class driver demo not having USB_STREAM_TIMEOUT_MS compile time option set properly to prevent slow 
+  *    devices from timing out the data pipes
+  *  - Fixed the definition of the Endpoint_BytesInEndpoint() macro for the U4 series AVR parts
+  *  - Fixed MIDI host Class driver MIDI_Host_SendEventPacket() routine not properly checking for Pipe ready before writing
+  *  - Fixed use of deprecated struct initializers, removed library unused parameter warnings when compiled with -Wextra enabled
+  *  - Fixed Still Image Host Class driver truncating the PIMA response code (thanks to Daniel Seibert)
+  *  - Fixed USB_CurrentMode not being reset to USB_MODE_NONE when the USB interface is shut down and both Host and Device modes can be
+  *    used (thanks to Daniel Levy)
+  *  - Fixed TeensyHID bootloader not enumerating to the host correctly (thanks to Clint Fisher)
+  *  - Fixed AVRISP project timeouts not checking for the correct timeout period (thanks to Carl Ott)
+  *  - Fixed STK525 Dataflash driver using incorrect bit-shifting for Dataflash addresses (thanks to Tim Mitchell)
+  *
+  *  \section Sec_ChangeLog091122 Version 091122
+  *
+  *  <b>New:</b>
+  *  - Added new Dual Role Keyboard/Mouse demo
+  *  - Added new HID_HOST_BOOT_PROTOCOL_ONLY compile time token to reduce the size of the HID Host Class driver when
+  *    Report protocol is not needed
+  *  - Added new MIDI LowLevel and ClassDriver Host demo, add new MIDI Host Class driver
+  *  - Added new CDC/Mouse ClassDriver device demo
+  *  - Added new Joystick Host ClassDriver and LowLevel demos
+  *  - Added new Printer Host mode Class driver
+  *  - Added new Printer Host mode ClassDriver demo
+  *  - Added optional support for double banked endpoints and pipes in the Device and Host mode Class drivers
+  *  - Added new stream creation function to the CDC Class drivers, to easily make standard I/O streams from CDC Class driver instances
+  *
+  *  <b>Changed:</b>
+  *  - Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for sytax errors in the library
+  *  - MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs
+  *  - Cleanups to the Device mode Mass Storage demo application SCSI routines
+  *  - Changed Audio Class driver sample read/write functions to be inline, to reduce the number of cycles needed to transfer
+  *    samples to and from the device (allowing more time for sample processing and output)
+  *  - Audio class Device mode demos now work at both 16MHz and 8MHz, rather than just at 8MHz
+  *  - The previous USBtoSerial demo has been moved into the projects directory, as it was just a modified CDC demo
+  *  - The Endpoint/Pipe functions now use the const qualifier on the input buffer
+  *  - Changed the CALLBACK_HIDParser_FilterHIDReportItem() callback to pass a HID_ReportItem_t rather than just the current
+  *    item's attributes, to expose more information on the item (including it's type, collection path, etc.)
+  *  - Changed MouseHostWithParser demos to check that the report items have a Mouse usage collection as a parent at some point,
+  *    to prevent Joysticks from enumerating with the demo
+  *  - Corrected the name of the misnamed USB_GetDeviceConfigDescriptor() function to USB_Host_GetDeviceConfigDescriptor().
+  *  - Keyboard LowLevel/ClassDriver demos now support multiple simultaneous keypresses (up to 6) per report
+  *
+  *  <b>Fixed:</b>
+  *  - Fixed PrinterHost demo returning invalid Device ID data when the attached device does not have a
+  *    device ID (thanks to Andrei Krainev)
+  *  - Changed LUFA_VERSION_INTEGER define to use BCD values, to make comparisons eaiser
+  *  - Fixed issue in the HID Host class driver's HID_Host_SendReportByID() routine using the incorrect mode (control/pipe)
+  *    to send report to the attached device
+  *  - Fixed ClassDriver AudioOutput device demo not selecting an audio output mode
+  *  - Fixed incorrect SampleFrequencyType value in the AudioInput and AudioOutput ClassDriver demos' descriptors
+  *  - Fixed incorrect event name rule in demo/project/bootloader makefiles
+  *  - Fixed HID device class driver not reselecting the correct endpoint once the user callback routines have been called
+  *  - Corrected HID descriptor in the Joystick Device demos - buttons should be placed outside the pointer collection
+  *  - Fixed HID report parser collection paths invalid due to misplaced semicolon in the free path item search loop
+  *  - Fixed HID host Class driver report send/receive report broken when issued through the control pipe
+  *  - Fixed HOST_STATE_AS_GPIOR compile time option being ignored when in host mode (thanks to David Lyons)
+  *  - Fixed LowLevel Keyboard demo not saving the issues report only after it has been sent to the host
+  *  - Fixed Endpoint_Write_Control_Stream_* functions not sending a terminating IN when given data Length is zero
+  *
+  *  \section Sec_ChangeLog090924 Version 090924
+  *
+  *  <b>New:</b>
+  *  - Added new host mode class drivers and matching demos to the library for rapid application development
+  *  - Added flag to the HID report parser to indicate if a device has multiple reports
+  *  - Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and
+  *    USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode
+  *  - Added new Endpoint_SetEndpointDirection() macro for bidirectional endpoints
+  *  - Added new AVRISP project, a LUFA powered clone of the Atmel AVRISP-MKII programmer
+  *  - Added ShutDown() functions for all hardware peripheral drivers, so that peripherals can be turned off after use
+  *  - Added new CDC_Device_Flush() command to the device mode CDC Class driver to flush Device->Host data
+  *  - Added extra masks to the SPI driver, changed SPI_Init() so that the clock polarity and sample modes can be set
+  *  - Added new callback to the HID report parser, so that the user application can filter only the items it is interested
+  *    in to be stored into the HIDReportInfo structure to save RAM
+  *  - Added support for the officially recommended external peripheral layout for the BUMBLEB board (thanks to Dave Fletcher)
+  *  - Added new Pipe_IsFrozen() macro to determine if the currently selected pipe is frozen
+  *  - Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID
+  *  - Added new combined Mass Storage and Keyboard demo (thanks to Matthias Hullin)
+  *  
+  *  <b>Changed:</b>
+  *  - SetIdle requests to the HID device driver with a 0 idle period (send changes only) now only affect the requested
+  *    HID interface within the device, not all HID interfaces
+  *  - Added explicit attribute masks to the device mode demos' descriptors
+  *  - Added return values to the CDC and MIDI class driver transmit functions
+  *  - Optimized Endpoint_Read_Word_* and Pipe_Read_Word_* macros to reduce compiled size
+  *  - Added non-null function parameter pointer restrictions to USB Class drivers to improve user code reliability
+  *  - Added new "Common" section to the class drivers, to hold all mode-independant definitions for clarity
+  *  - Moved SCSI command/sense constants into the Mass Storage Class driver, instead of the user-code
+  *  - Altered the SCSI commands in the LowLevel Mass Storage Host to save on FLASH space by reducing function calls
+  *  - Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks
+  *    and data validations internally, to simplify user code
+  *  - Changed HIDParser to only zero out important values in the Parsed HID Report Item Information structure to save cycles
+  *  - The HID report parser now always processed FEATURE items - HID_ENABLE_FEATURE_PROCESSING token now has no effect
+  *  - The HID report parser now always ignores constant-data items, HID_INCLUDE_CONSTANT_DATA_ITEMS token now has no effect
+  *  - The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool
+  *  - Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names
+  *    are used in a project
+  *  - The HID Report Parser now gives information on the total length of each report within a HID interface
+  *  - The USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now seperate USB_Descriptor_* and
+  *    USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so both may be used
+  *
+  *  <b>Fixed:</b>
+  *  - Fixed possible lockup in the CDC device class driver, when the host sends data that is a multiple of the
+  *    endpoint's bank
+  *  - Fixed swapped parameters in the HID state memory copy call while processing a HID PUSH item in the HID report parser
+  *  - Fixed memory corruption HID report parser when too many COLLECTION or PUSH items were processed
+  *  - Fixed HID report parser not resetting the FEATURE item count when a REPORT ID item is encountered
+  *  - Fixed USBtoSerial demos not reading in UDR1 when the USART receives data but the USB interface is not enumerated,
+  *    causing continuous USART receive interrupts
+  *  - Fixed misspelt event name in the Class driver USBtoSerial demo, preventing correct operation
+  *  - Fixed invalid data being returned when a GetStatus request is issued in Device mode with an unhandled data recipient
+  *  - Added hardware USART receive interrupt and software buffering to the Benito project to ensure received data is not
+  *    missed or corrupted
+  *  - Fixed Device mode HID Class driver always sending IN packets, even when nothing to report
+  *  - Fixed Device mode HID Class driver not explicitly initializing the ReportSize parameter to zero before calling callback
+  *    routine, so that ignored callbacks don't cause incorrect data to be sent
+  *  - Fixed StillImageHost not correctly freezing and unfreezing data pipes while waiting for a response block header
+  *  - Fixed error in the PrinterHost demo preventing the full page data from being sent to the attached device (thanks to John Andrews)
+  *  - Fixed CDC based demos and projects' INF driver files under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker)
+  *  - Re-add in missing flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)
+  *  - Fix allowable F_CPU values comment in project makefiles to more accurately reflect the allowable values on the USB AVRs
+  *  - Fixed DFU and CDC class bootloaders on the series 2 USB AVRs, corrected invalid signatures, added support for the new
+  *    ATMEGAxx2 series 2 variant AVRs to the DFU bootloader
+  *  - Fixed Low Level USBtoSerial demo not storing received characters (thanks to Michael Cooper)
+  *  - Fixed MIDI Device Class driver not sending/receiving MIDI packets of the correct size (thanks to Thomas Bleeker)
+  *
+  *
+  *  \section Sec_ChangeLog090810 Version 090810
+  *
+  *  <b>New:</b>
+  *  - Added new device class drivers and matching demos to the library for rapid application development
+  *  - Added new PrinterHost demo (thanks to John Andrews)
+  *  - Added USB Missle Launcher project, submitted by Dave Fletcher
+  *  - Added new Benito Arduino Programmer project
+  *  - Added incomplete device and host mode demos for later enhancement
+  *  - Updated MassStorage device block write routines to use ping-pong Dataflash buffering to increase throughput by around 30%
+  *  - Error status LEDs shown when device endpoint configuration fails to complete in all demos and projects
+  *  - Added new USB_Host_SetDeviceConfiguration() convenience function for easy configuration selection of devices while in USB
+  *    host mode
+  *  - Added new USB_Host_ClearPipeStall() convenience function to clear a stall condition on an attached device's endpoint
+  *  - Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor
+  *  - Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers
+  *  - Added new USE_INTERNAL_SERIAL define for using the unique serial numbers in some AVR models as the USB device's serial number,
+  *    added NO_INTERNAL_SERIAL compile time option to turn off new serial number reading code
+  *  - Added new DATAFLASH_CHIP_MASK() macro to the Dataflash driver, which returns the Dataflash select mask for the given chip index
+  *  - Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the
+  *    device has been removed (for use when an error occurs or communications with the device have completed)
+  *  - Added new FAST_STREAM_TRANSFERS compile time option for faster stream transfers via multiple bytes copied per stream loop
+  *  - Added stdio stream demo code to the CDC device demos, to show how to create standard streams out of the virtual serial ports
+  *  - Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions
+  *  - Added new USE_FLASH_DESCRIPTORS and FIXED_NUM_CONFIGURATIONS compile time options
+  *  - Added support for the new ATMEGA32U2, ATMEGA16U2 and ATMEGA8U2 AVR models
+  *  - Added new USB_DeviceState variable to keep track of the current Device mode USB state
+  *  - Added new LEDs_ToggleLEDs() function to the LEDs driver
+  *  - Added new Pipe_BoundEndpointNumber() and Pipe_IsEndpointBound() functions
+  *  - Added new DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR compile time options
+  *  - Added 404 Not Found errors to the webserver in the RNDIS demos to indicate invalid URLs
+  *  
+  *  <b>Changed:</b>
+  *  - Deprecated psuedo-scheduler and removed dynamic memory allocator from the library (first no longer needed and second unused)
+  *  - The device-mode CALLBACK_USB_GetDescriptor() function now has an extra parameter so that the memory space in which the requested
+  *    descriptor is located can be specified. This means that descriptors can now be located in multiple memory spaces within a device.
+  *  - Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality
+  *  - Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead
+  *  - Extended USB_GetDeviceConfigDescriptor() routine to require the configuration number within the device to fetch
+  *  - Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning,
+  *    no need to call Dataflash_ToggleSelectedChipCS() afterwards
+  *  - Low level API MIDI device demo no longer blocks if a note change event is sent while the endpoint is not ready
+  *  - Pipe_GetErrorFlags() now returns additional error flags for overflow and underflow errors
+  *  - Pipe stream functions now automatically set the correct pipe token, so that bidirectional pipes can be used
+  *  - Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling
+  *    the existing Pipe_SetFiniteINRequests() function
+  *  - Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case
+  *  - Host mode demos now use sane terminal escape codes, so that text is always readable and events/program output is visually distinguished
+  *    from oneanother using foreground colours
+  *  - Internal per-device preprocessing conditions changed to per-device series rather than per-controller group for finer-grain
+  *    internal control
+  *  - Interrupts are no longer disabled during the processing of Control Requests on the default endpoint while in device mode
+  *  - AudioOutput demos now always output to board LEDs, regardless of output mode (removed AUDIO_OUT_LEDS project option)
+  *  - Removed SINGLE_DEVICE_CONFIGURATION compile time option in favour of the new FIXED_NUM_CONFIGURATIONS option so that the exact number
+  *    of device configurations can be defined statically
+  *  - Removed VBUS events, as they are already exposed to the user application via the regular device connection and disconnection events
+  *  - Renamed and altered existing events to properly seperate out Host and Device mode events
+  *
+  *  <b>Fixed:</b>
+  *  - Changed bootloaders to use FLASHEND rather than the existence of RAMPZ to determine if far FLASH pointers are needed to fix
+  *    bootloaders on some of the USB AVR devices where avr-libc erronously defines RAMPZ
+  *  - Fixes to MassStorageHost for better device compatibility (increase command timeout, change MassStore_WaitForDataReceived()
+  *    to only unfreeze and check one data pipe at a time) to prevent incorrect device enumerations and freezes while trasferring data
+  *  - Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is
+  *    cleared to prevent endpoint type corruption
+  *  - Fixed issue opening CDC-ACM ports on hosts when the CDC device tries to send data before the host has set the line encoding
+  *  - Fixed USB_OPT_MANUAL_PLL option being ignored during device disconnects on some models (thanks to Brian Dickman)
+  *  - Fixed documentation mentioning Pipe_GetCurrentToken() function when correct function name is Pipe_GetPipeToken()
+  *  - Fixed ADC driver for the ATMEGA32U4 and ATMEGA16U4 (thanks to Opendous Inc.)
+  *  - Fixed CDCHost demo unfreezing the pipes at the point of configuration, rather than use
+  *  - Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command
+  *  - Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails
+  *  - Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used
+  *  - Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected
+  *  - Fixed Mouse/Keyboard demos not performing the correct arithmetic on the Idle period at the right times (thanks to Brian Dickman)
+  *  - Fixed GenericHID failing HID class tests due to incorrect Logical Minimum and Logical Maximum values (thanks to Søren Greiner)
+  *  - Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews)
+  *  - Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits
+  *  - Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered
+  *  - Fixed incorrect BUTTONS_BUTTON1 for the STK526 target
+  *  - Fixed RNDIS demos freezing when more than one connection was attempted simultaneously, causing memory corruption
+  *  - Fixed USBtoSerial demo receiving noise from the USART due to pullup not being enabled
+  *
+  *
+  *  \section Sec_ChangeLog090605 Version 090605
+  *
+  *  - Fixed bug in RNDISEthernet and DualCDC demos not using the correct USB_ControlRequest structure for control request data
+  *  - Fixed documentation showing incorrect USB mode support on the supported AVRs list
+  *  - Fixed RNDISEthernet not working under Linux due to Linux requiring an "optional" RNDIS request which was unhandled
+  *  - Fixed Mouse and Keyboard device demos not acting in accordance with the HID specification for idle periods (thanks to Brian Dickman)
+  *  - Removed support for endpoint/pipe non-control interrupts; these did not act in the way users expected, and had many subtle issues
+  *  - Fixed Device Mode not handling Set Feature and Clear Feature Chapter 9 requests that are addressed to the device (thanks to Brian Dickman)
+  *  - Moved control endpoint interrupt handling into the library itself, enable via the new INTERRUPT_CONTROL_ENDPOINT token
+  *  - Fixed CDCHost not clearing configured pipes and resetting configured pipes mask when a partially enumerated invalid CDC
+  *    interface is skipped
+  *  - Clarified the size of library tokens which accept integer values in the Compile Time Tokens page, values now use the smallest datatype
+  *    inside the library that is able to hold their defined value to save space
+  *  - Removed DESCRIPTOR_ADDRESS() macro as it was largely supurflous and only served to obfuscate code
+  *  - Rewritten event system to remove all macros, to make user code clearer
+  *  - Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley)
+  *  - Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code
+  *  - Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code
+  *  - USB_IsConnected is now cleared before the USB_Disconnect() event is fired in response to VBUS being removed
+  *  - Fixed incorrect PID value being used in the USBtoSerial project (thanks to Phill)
+  *  - Deleted StdDescriptors.c, renamed USB_GetDescriptor() to CALLBACK_USB_GetDescriptor, moved ConfigDescriptor.c/.h from the
+  *    LUFA/Drivers/USB/Class/ directory to LUFA/Drivers/USB/HighLevel/ in preperation for the new USB class APIs
+  *  - Moved out each demos' functionality library files (e.g. Ring Buffer library) to /Lib directories for a better directory structure
+  *  - Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt
+  *  - Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition
+  *    becomes true
+  *
+  *
+  *  \section Sec_ChangeLog090510 Version 090510
+  *
+  *  - Added new GenericHIDHost demo
+  *  - Corrections to the KeyboardHost and MouseHost demos' pipe handling to freeze and unfreeze the data pipes at the point of use
+  *  - KeyboardHost, MouseHost and GenericHIDHost demos now save and restore the currently selected pipe inside the pipe ISR
+  *  - Changed GenericHID device demo to use the LUFA scheduler, added INTERRUPT_DATA_ENDPOINT and INTERRUPT_CONTROL_ENDPOINT compile
+  *    time options
+  *  - All comments in the library, bootloaders, demos and projects have now been spell-checked and spelling mistakes/typos corrected
+  *  - Added new PIMA_DATA_SIZE() define to the Still Image Host demo
+  *  - Add call to MassStore_WaitForDataReceived() in MassStore_GetReturnedStatus() to ensure that the CSW has been received in the
+  *    extended MSC timeout period before continuing, to prevent long processing delays from causing the MassStore_GetReturnedStatus()
+  *    to early-abort (thanks to Dmitry Maksimov)
+  *  - Move StdRequestType.h, StreamCallbacks.h, USBMode.h from the LowLevel USB driver directory to the HighLevel USB driver directory,
+  *    where they are more suited
+  *  - Removed all binary constants and replaced with decimal or hexadecimal constants so that unpatched GCC compilers can still build the
+  *    code without having to be itself patched and recompiled first
+  *  - Added preprocessor checks and documentation to the bootloaders giving information about missing SIGNATURE_x defines due to
+  *    outdated avr-libc versions.
+  *  - Added support to the CDCHost demo for devices with multiple CDC interfaces which are not the correct ACM type preceding the desired
+  *    ACM CDC interface
+  *  - Fixed GenericHID demo not starting USB and HID management tasks when not using interrupt driven modes (thanks to Carl Kjeldsen)
+  *  - Fixed RNDISEthenet demo checking the incorrect message field for packet size constraints (thanks to Jonathan Oakley)
+  *  - Fixed WriteNextReport code in the GenericHIDHost demo using incorrect parameter types and not selecting the correct endpoint
+  *  - Adjusted sample CTC timer calculations in the AudioOutput and AudioInput demos to match the CTC calculations in the AVR datasheet,
+  *    and to fix instances where rounding caused the endpoint to underflow (thanks to Robin Theunis)
+  *  - The USB_Host_SendControlRequest() function no longer automatically selects the Control pipe (pipe 0), so that other control type
+  *    pipes can be used with the function
+  *  - The USB Host management task now saves and restores the currently selected pipe before and after the task completes
+  *  - Fixed GenericHIDHost demo report write routine incorrect for control type requests (thanks to Andrei Krainev)
+  *  - Removed Endpoint_ClearCurrentBank() and Pipe_ClearCurrentBank() in favour of new Endpoint_ClearIN(), Endpoint_ClearOUT(),
+  *    Pipe_ClearIN() and Pipe_ClearOUT() macros (done to allow for the detection of packets of zero length)
+  *  - Renamed *_ReadWriteAllowed() macros to *_IsReadWriteAllowed() to remain consistent with the rest of the LUFA API
+  *  - Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(), Endpoint_ClearSetupReceived() macro has been
+  *    renamed to Endpoint_ClearSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the
+  *    Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe
+  *    bank management API
+  *  - Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel from Curetis AG)
+  *  - Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity
+  *  - Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity
+  *  - Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway
+  *  - Renamed the main Drivers/AT90USBXXX directory to Drivers/Peripheral, renamed the Serial_Stream driver to SerialStream
+  *  - Fixed CDC and USBtoSerial demos freezing where buffers were full while still transmitting or receiving (thanks to Peter Hand)
+  *  - Removed "Host_" section of the function names in ConfigDescriptor.h, as most of the routines can now be used in device mode on the
+  *    device descriptor
+  *  - Renamed functions in the HID parser to have a "USB_" prefix and the acronym "HID" in the name
+  *  - Fixed incorrect HID interface class and subclass values in the Mouse and KeyboardMouse demos (thanks to Brian Dickman)
+  *  - Capitalised the "Descriptor_Search" and "Descriptor_Search_Comp" prefixes of the values in the DSearch_Return_ErrorCodes_t and
+  *    DSearch_Comp_Return_ErrorCodes_t enums
+  *  - Removed "ERROR" from the enum names in the endpoint and pipe stream error code enums
+  *  - Renamed the USB_PowerOnErrorCodes_t enum to USB_InitErrorCodes_t, renamed the POWERON_ERROR_NoUSBModeSpecified enum value to
+  *    USB_INITERROR_NoUSBModeSpecified
+  *  - Renamed USB_PowerOnFail event to USB_InitFailure
+  *  - Renamed OTG.h header functions to be more consistent with the rest of the library API
+  *  - Changed over all deprecated GCC structure tag initializers to the standardized C99 format (thanks to Mike Alexander)
+  *  - USB_HostRequest renamed to USB_ControlRequest, entire control request header is now read into USB_ControlRequest in Device mode
+  *    rather than having the library pass only partially read header data to the application
+  *  - The USB_UnhandledControlPacket event has had its parameters removed, in favour of accessing the new USB_ControlRequest structure
+  *  - The Endpoint control stream functions now correctly send a ZLP to the host when less data than requested is sent
+  *  - Fixed USB_RemoteWakeupEnabled flag never being set (the REMOTE WAKEUP Set Feature request was not being handled)
+  *  - Renamed the FEATURELESS_CONTROL_ONLY_DEVICE compile-time token to CONTROL_ONLY_DEVICE
+  *  - Endpoint configuration is now refined to give better output when all configurations have static inputs - removed the now useless
+  *    STATIC_ENDPOINT_CONFIGURATION compile time token
+  *  - Fixed SPI driver init function not clearing SPI2X bit when not needed
+  *  - Fixed PREVENT ALLOW MEDIUM REMOVAL command issuing in the MassStorageHost demo using incorrect parameters (thanks to Mike Alex)
+  *  - Fixed MassStorageHost demo broken due to an incorrect if statement test in MassStore_GetReturnedStatus()
+  *  - Fixed reversed signature byte ordering in the CDC bootloader (thanks to Johannes Raschke)
+  *  - Changed PIPE_CONTROLPIPE_DEFAULT_SIZE from 8 to 64 to try to prevent problems with faulty devices which do not respect the given
+  *    wLength value when reading in the device descriptor
+  *  - Fixed missing semicolon in the ATAVRUSBRF01 LED board driver code (thanks to Morten Lund)
+  *  - Changed LED board driver code to define dummy LED masks for the first four board LEDs, so that user code can be compiled for boards
+  *    with less than four LEDs without code modifications (thanks to Morten Lund)
+  *  - Changed HWB board driver to Buttons driver, to allow for the support of future boards with more than one mounted GPIO button
+  *  - Serial driver now correctly calculates the baud register value when in double speed mode
+  *  - Init function of the Serial driver is now static inline to product smaller code for the common-case of static init values
+  *    
+  *
+  *  \section Sec_ChangeLog090401 Version 090401
+  *
+  *  - Fixed MagStripe project configuration descriptor containing an unused (blank) endpoint descriptor
+  *  - Incorporated makefile changes by Denver Gingerich to retain compatibility with stock (non-WinAVR) AVR-GCC installations
+  *  - Fixed makefile EEPROM programming targets programming FLASH data in addition to EEPROM data
+  *  - LUFA devices now enumerate correctly with LUFA hosts
+  *  - Fixed Configuration Descriptor search routine freezing when a comparator returned a failure
+  *  - Removed HID report item serial dump in the MouseHostWithParser and KeyboardHostWithParser - useful only for debugging, and
+  *    slowed down the enumeration of HID devices too much
+  *  - Increased the number of bits per track which can be read in the MagStripe project to 8192 when compiled for the AT90USBXXX6/7
+  *  - Fixed KeyboardMouse demo discarding the wIndex value in the REQ_GetReport request
+  *  - USBtoSerial demo now discards all Rx data when not connected to a USB host, rather than buffering characters for transmission
+  *    next time the device is attached to a host.
+  *  - Added new F_CLOCK compile time constant to the library and makefiles, to give the raw input clock (used to feed the PLL before any
+  *    clock prescaling is performed) frequency, so that the PLL prescale mask can be determined
+  *  - Changed stream wait timeout counter to be 16-bit, so that very long timeout periods can be set for correct communications with
+  *    badly designed hosts or devices which greatly exceed the USB specification limits
+  *  - Mass Storage Host demo now uses a USB_STREAM_TIMEOUT_MS of two seconds to maintain compatibility with poorly designed devices
+  *  - Function attribute ATTR_ALWAYSINLINE renamed to ATTR_ALWAYS_INLINE to match other function attribute macro naming conventions
+  *  - Added ATTR_ALWAYS_INLINE attribute to several key inlined library components, to ensure they are inlined in all circumstances
+  *  - Removed SetSystemClockPrescaler() macro, the clock_prescale_set() avr-libc macro has been corrected in recent avr-libc versions
+  *  - Fixed incorrect/missing control status stage transfers on demos, bootloaders and applications (thanks to Nate Lawson)
+  *  - The NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded
+  *    to also remove parts of the Get Status chapter 9 request to further reduce code usage
+  *  - Makefile updated to include output giving the currently selected BOARD parameter value
+  *  - Board Dataflash driver now allows for dataflash ICs which use different shifts for setting the current page/byte address (thanks
+  *    to Kenneth Clubb)
+  *  - Added DataflashManager_WriteBlocks_RAM() and DataflashManager_ReadBlocks_RAM() functions to the MassStorage demo, to allow for easy
+  *    interfacing with a FAT library for dataflash file level access
+  *  - Corrected CDC class bootloader to fix a few bugs, changed address counter to store x2 addresses for convenience
+  *  - Fixed typos in the SPI driver SPI_SPEED_FCPU_DIV_64 and SPI_SPEED_FCPU_DIV_128 masks (thanks to Markus Zocholl)
+  *  - Keyboard and Mouse device demos (normal, data interrupt and fully interrupt driven) combined into unified keyboard and mouse demos
+  *  - Keyboard and Mouse host demos (normal and data interrupt driven) combined into unified keyboard and mouse demos
+  *  - Removed AVRISP_Programmer project due to code quality concerns
+  *  - Fixed CDC demo not sending an empty packet after each transfer to prevent the host from buffering incoming data
+  *  - Fixed documentation typos and preprocessor checks relating to misspellings of the USE_RAM_DESCRIPTORS token (thanks to Ian Gregg)
+  *  - Fixed USBTask.h not conditionally including HostChapter9.h only when USB_CAN_BE_HOST is defined (thanks to Ian Gregg)
+  *  - Fixed incorrect ADC driver init register manipulation (thanks to Tobias)
+  *  - Added new GenericHID device demo application
+  *  - Fixed Still Image Host SImage_SendData() function not clearing the pipe bank after sending data
+  *
+  *
+  *  \section Sec_ChangeLog090209 Version 090209
+  *
+  *  - PWM timer mode in AudioOut demo changed to Fast PWM for speed
+  *  - Updated Magstripe project to work with the latest hardware revision
+  *  - Fixed library not responding to the BCERRI flag correctly in host mode, leading to device lockups
+  *  - Fixed library handling Get Descriptor requests when not addressed as standard requests to the device or interface (thanks to
+  *    Nate Lawson)
+  *  - Fixed serious data corruption issue in MassStorage demo dataflash write routine
+  *  - Added new NO_CLEARSET_FEATURE_REQUEST compile time token
+  *  - USB task now restores previous global interrupt state after execution, rather than forcing global interrupts to be enabled
+  *  - Fixed USB_DeviceEnumerationComplete event firing after each configuration change, rather than once after the initial configuration
+  *  - Added ENDPOINT_DOUBLEBANK_SUPPORTED() macros to Endpoint.h, altered ENDPOINT_MAX_SIZE() to allow user to specify endpoint
+  *  - ENDPOINT_MAX_ENDPOINTS changed to ENDPOINT_TOTAL_ENDPOINTS, PIPE_MAX_PIPES changed to PIPE_TOTAL_PIPES
+  *  - Endpoint and Pipe non-control stream functions now ensure endpoint or pipe is ready before reading or writing
+  *  - Changed Teensy bootloader to use a watchdog reset when exiting rather than a software jump
+  *  - Fixed integer promotion error in MassStorage and MassStorageHost demos, corrupting read/write transfers
+  *  - SPI_SendByte is now SPI_TransferByte, added new SPI_SendByte and SPI_ReceiveByte functions for fast one-way transfer
+  *  - MassStorage demo changed to use new fast one-way SPI transfers to increase throughput
+  *  - MassStorage handling of Mass Storage Reset class request improved
+  *  - Altered MassStorage demo dataflash block read code for speed
+  *  - Added USB_IsSuspended global flag
+  *  - Simplified internal Dual Mode (OTG) USB library code to reduce code size
+  *  - Extended stream timeout period to 100ms from 50ms
+  *  - Mass Storage Host demo commands now all return an error code from the Pipe_Stream_RW_ErrorCodes_t enum
+  *  - Added SubErrorCode parameter to the USB_DeviceEnumerationFailed event
+  *  - VBUS drop interrupt now disabled during the manual-to-auto VBUS delivery handoff
+  *  - Simplified low level backend so that device/host mode initialization uses the same code paths
+  *  - Added workaround for faulty Mass Storage devices which do not implement the required GET_MAX_LUN request
+  *  - Removed buggy Telnet application from the RNDIS demo
+  *  - Moved Mass Storage class requests in the Mass Storage Host demo to wrapper functions in MassStoreCommands.c
+  *  - Fixed incorrect SCSI command size value in the Request Sense command in MassStoreCommands.c
+  *  - Added SetProtocol request to HID class non-parser Mouse and Keyboard demos to force devices to use the correct Boot Protocol
+  *  - Added new "dfu" and "flip" programming targets to project makefiles
+  *  - HID_PARSE_Sucessful enum member typo corrected to HID_PARSE_Successful
+  *  - Changed COLLECTION item structures in the HID descriptor parser to include the collection's Usage Page value
+  *  - Serial driver now sets Tx line as output, enables pullup on Rx line
+  *  - Fixed smaller USB AVRs raising multiple connection and disconnection events when NO_LIMITED_CONTROLLER_CONNECT is disabled
+  *  - Added HOST_DEVICE_SETTLE_DELAY_MS to give the host delay after a device is connected before it is enumerated
+  *  - Fixed KeyboardHostWithParser demo linking against the wrong global variables
+  *  - Completed doxygen documentation of remaining library bootloaders, demos and projects
+  *  - Fixed incorrect bootloader start address in the TeensyHID bootloader
+  *  - Added HWB button whole-disk ASCII dump functionality to MassStoreHost demo
+  *  - Replaced printf_P(PSTR("%c"), {Variable}) calls with putchar(<Variable>) for speed and size savings
+  *  - Serial driver now accepts baud rates over 16-bits in size, added double speed flag option
+  *  - Fixed incorrect callback abort return value in Pipe.c
+  *  - Added new flip-ee and dfu-ee makefile targets (courtesy of Opendous Inc.)
+  *  - Removed reboot-on-disconnect code from the TeensyHID bootloader, caused problems on some systems
+  *  - Fixed AudioOutput and AudioInput demos looping on the endpoint data, rather than processing a sample at a time and returning
+  *    each time the task runs to allow for other tasks to execute
+  *  - Added support for the Atmel ATAVRUSBRF01 board
+  *  - Added AVRISP Programmer Project, courtesy of Opendous Inc.
+  *  - Fixed CDC Host demo not searching through both CDC interfaces for endpoints
+  *  - Fixed incorrect Product String descriptor length in the DFU class bootloader
+  *
+  *
+  *  \section Sec_ChangeLog081224 Version 081224
+  *
+  *  - MyUSB name changed to LUFA, the Lightweight USB Framework for AVRs
+  *  - Fixed Mass Storage Host demo's MassStore_SendCommand() delay in the incorrect place
+  *  - Fixed USBtoSerial demo not calling ReconfigureUSART() after a change in the line encoding
+  *  - Fixed infinite loop in host mode Host-to-Device control transfers with data stages
+  *  - HID report parser now supports devices with multiple reports in one interface via Report IDs
+  *  - Fixed RZUSBSTICK board LED driver header incorrect macro definition order causing compile errors
+  *  - Calling USB_Init() when the USB interface is already configured now forces a complete interface reset
+  *    and re-enumeration - fixes MyUSB DFU bootloader not switching to app code correctly when soft reset used
+  *  - Fixed "No newline at end of file" warning when stream callbacks are enabled
+  *  - DFU bootloader now uses fixed signature bytes per device, rather than reading them out dynamically for size
+  *  - Added new FIXED_CONTROL_ENDPOINT_SIZE and USE_SINGLE_DEVICE_CONFIGURATION switches to statically define certain values to
+  *    reduce compiled binary size
+  *  - Added new NO_LIMITED_CONTROLLER_CONNECT switch to prevent the library from trying to determine bus connection
+  *    state from the suspension and wake up events on the smaller USB AVRs
+  *  - Added summary of all library compile time tokens to the documentation
+  *  - Added overview of the LUFA scheduler to the documentation
+  *  - Removed MANUAL_PLL_CONTROL compile time token, replaced with a mask for the USB_Init() Options parameter
+  *  - CDC bootloader now uses the correct non-far or far versions of the pgm_* functions depending on if RAMPZ is defined
+  *  - Doxygen documentation now contains documentation on all the projects, bootloaders and most demos included with the library
+  *  - CDC bootloader now runs user application when USB disconnected rather than waiting for a hard reset
+  *  - MouseHostWithParser and KeyboardHostWithParser now support multiple-report devices
+  *  - RNDIS demo can now close connections correctly using the new TCP_APP_CLOSECONNECTION() macro - used in Webserver  
+  *  - Fixed the DFU bootloader, no longer freezes up when certain files are programmed into an AVR, made reading/writing faster
+  *  - Fixed mouse/joystick up/down movements reversed - HID mouse X/Y coordinates use a left-handed coordinate system, not a normal 
+  *    right-handed system
+  *  - Added stub code to the CDC and USBtoSerial demos showing how to read and set the RS-232 handshake lines - not currently used in
+  *    the demos, but the example code and supporting defines are now in place
+  *  - Interrupts are now disabled when processing a control request in device mode, to avoid exceeding the strict control request
+  *    timing requirements.
+  *  - All demos now use a central StatusUpdate() function rather than direct calls to the board LED functions, so that the demos can
+  *    easily be altered to show different LED combinations (or do something else entirely) as the demo's status changes
+  *  - Removed LED commands from the CDC bootloader, unused by most AVR910 programming software
+  *  - Fixed RNDIS demo ICMP ping requests echoing back incorrect data
+  *  - Added DHCP server code to RNDIS demo, allowing for hands-free auto configuration on any PC
+  *  - Fixed DFU bootloader PID value for the ATMEGA16U4 AVR
+  *  - Endpoint and Pipe configuration functions now return an error code indicating success or failure
+  *  - USB Reset in device mode now resets and disables all device endpoints
+  *  - Added intermediate states to the host mode state machine, reducing the USB task blocking time to no more than 1ms explicitly per
+  *    invocation when in host mode
+  *  - Added support for the ATMEGA32U6 microcontroller
+  *  - Added STATIC_ENDPOINT_CONFIGURATION compile time option, enabled in the bootloaders to minimize space usage
+  *  - Removed redundant code from the USB device GetStatus() chapter 9 processing routine
+  *  - Added new TeensyHID bootloader, compatible with the Teensy HID protocol (http://www.pjrc.com/teensy/)
+  *  - Versions are now numbered by release dates, rather than arbitrary major/minor revision numbers
+  *  - USB_RemoteWakeupEnabled is now correctly set and cleared by SetFeature and ClearFeature requests from the host
+  *  - Changed prototype of GetDescriptor, so that it now returns the descriptor size (or zero if the descriptor doesn't exist)
+  *    rather than passing the size back to the caller through a parameter and returning a boolean
+  *
+  *
+  *  \section Sec_ChangeLog153 Version 1.5.3 - Released 2nd October, 2008
+  *
+  *  - Fixed CDC bootloader using pgmspace macros for some descriptors inappropriately
+  *  - Updated all Mouse and Keyboard device demos to include boot protocol support (now works in BIOS)
+  *  - Renamed bootloader directories to remove spaces, which were causing build problems on several OSes
+  *  - Removed serial number strings from all but the MassStore demo where it is required - users were not
+  *    modifying the code to either omit the descriptor or use a unique serial per device causing problems
+  *    when multiple units of the same device were plugged in at the same time
+  *  - AudioOutput and AudioInput demos now correctly silence endpoints when not enabled by the host
+  *  - Added KeyboardMouse demo (Keyboard and Mouse functionality combined into a single demo)
+  *  - Added DriverStubs directory to house board level driver templates, to make MyUSB compatible custom board
+  *    driver creation easier
+  *  - Extended MassStorage demo to support multiple LUNs, 2 by default
+  *  - Fixed incorrect device address mask, preventing the device from enumerating with addresses larger than 63
+  *  - Fixed incorrect data direction mask in the GetStatus standard request, preventing it from being handled
+  *  - Fixed incorrect GetStatus standard request for endpoints, now returns the endpoint STALL status correctly
+  *  - Added in new USB_RemoteWakeupEnabled and USB_CurrentlySelfPowered flags rather than using fixed values
+  *  - Added DualCDC demo to demonstrate the use of Interface Association Descriptors
+  *  - Added pipe NAK detection and clearing API
+  *  - Added pipe status change (NAK, STALL, etc.) interrupt API
+  *  - Fixed MassStorageHost demo so that it no longer freezes randomly when issuing several commands in a row
+  *  - Host demos configuration descriptor routines now return a unique error code when the returned data does
+  *    not have a valid configuration descriptor header
+  *  - Added Endpoint_WaitUntilReady() and Pipe_WaitUntilReady() functions
+  *  - Stream functions now have software timeouts, timeout period can be set by the USB_STREAM_TIMEOUT_MS token
+  *  - All demos now pass the USB.org automated Chapter 9 device compliance tests
+  *  - All HID demos now pass the USB.org automated HID compliance tests
+  *  - Polling interval of the interrupt endpoint in the CDC based demos changed to 0xFF to fix problems on Linux systems
+  *  - Changed stream functions to accept a new callback function, with NO_STREAM_CALLBACKS used to disable all callbacks
+  *  - Mass Storage demo dataflash management routines changed to use the endpoint stream functions		
+  *  - Added AVRStudio project files for each demo in addition to the existing Programmer's Notepad master project file
+  *  - Re-added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes
+  *    are reflected in the hardware (change was previously lost)
+  *
+  *
+  *  \section Sec_ChangeLog152 Version 1.5.2 - Released 31st July, 2008
+  *
+  *  - Fixed SwapEndian_32() function in Common.h so that it now works correctly (wrong parameter types)
+  *  - Updated RNDIS demo - notification endpoint is no longer blocking so that it works with faulty Linux RNDIS
+  *    implementations (where the notification endpoint is ignored in favour of polling the control endpoint)
+  *  - Fixed incorrect Vendor Description string return size in RNDIS demo for the OID_GEN_VENDOR_DESCRIPTION OID token
+  *  - Added very basic TCP/IP stack and HTTP/TELNET servers to RNDIS demo
+  *  - Fixed DFU bootloader exit causing programming software to complain about failed writes
+  *  - Fixed DFU bootloader EEPROM programming mode wiping first flash page
+  *  - Fixed Clear/Set Feature device standard request processing code (fixing MassStorage demo in the process)
+  *  - Added support for the ATMEGA16U4 AVR microcontroller
+  *  - Library licence changed from LGPLv3 to MIT license
+  *
+  *
+  *  \section Sec_ChangeLog151 Version 1.5.1 - Released 31st July, 2008
+  *
+  *  - Changed host demos to enable the host function task on the firing of the USB_DeviceEnumerationComplete event
+  *    rather than the USB_DeviceAttached event
+  *  - HID Usage Stack now forcefully cleared after an IN/OUT/FEATURE item has been completely processed to remove
+  *    any referenced but not created usages
+  *  - Changed USB_INT_DisableAllInterrupts() and USB_INT_ClearAllInterrupts(), USB_Host_GetNextDescriptorOfType(),
+  *    USB_Host_GetNextDescriptorOfTypeBefore(), USB_Host_GetNextDescriptorOfTypeAfter() to normal functions (from inline)
+  *  - Fixed USBtoSerial demo not sending data, only receiving
+  *  - Fixed main makefile to make all by default, fixed MagStripe directory case to prevent case-sensitive path problems
+  *  - ConfigDescriptor functions made normal, instead of static inline
+  *  - Pipe/Endpoint *_Ignore_* functions changed to *_Discard_*, old names still present as aliases
+  *  - Fixed ENDPOINT_MAX_SIZE define to be correct on limited USB controller AVRs
+  *  - Changed endpoint and pipe size translation routines to use previous IF/ELSE IF cascade code, new algorithmic
+  *    approach was buggy and caused problems
+  *  - Bootloaders now compile with -fno-inline-small-functions option to reduce code size
+  *  - Audio demos now use correct endpoint sizes for full and limited controller USB AVRs, double banking in all cases
+  *    to be in line with the specification (isochronous endpoints MUST be double banked)
+  *  - Added Interface Association descriptor to StdDescriptors.h, based on the relevant USB2.0 ECN
+  *  - Fixed MIDI demo, corrected Audio Streaming descriptor to follow the MIDI-specific AS structure
+  *  - Fixed HID class demo descriptors so that the HID interface's protocol is 0x00 (required for non-boot protocol HID
+  *    devices) to prevent problems on hosts expecting the boot protocol functions to be supported
+  *  - Added read/write control stream functions to Endpoint.h
+  *  - Fixed AudioOut demo not setting port pins to inputs on USB disconnect properly
+  *  - Added RNDISEthernet demo application
+  *
+  *
+  *  \section Sec_ChangeLog150 Version 1.5.0 - Released 10 June, 2008
+  *
+  *  - Fixed MIDI demo, now correctly waits for the endpoint to be ready between multiple note messages
+  *  - Added CDC Host demo application
+  *  - Added KeyboardFullInt demo application
+  *  - Endpoint and Pipe creation routines now mask endpoint/pipe size with the size mask, to remove transaction
+  *    size bits not required for the routines (improves compatibility with devices)
+  *  - Fixed AudioInput demo - now correctly sends sampled audio to the host PC
+  *  - Fixed AudioOutput demo once more -- apparently Windows requires endpoint packets to be >=192 bytes
+  *  - Shrunk round-robbin scheduler code slightly via the use of struct pointers rather than array indexes
+  *  - Fixed off-by-one error when determining if the Usage Stack is full inside the HID Report parser
+  *  - Renamed Magstripe.h to MagstripeHW.h and moved driver out of the library and into the MagStripe demo folder
+  *  - Added preprocessor checks to enable C linkage on the library components when used with a C++ compiler
+  *  - Added Still Image Host demo application
+  *  - The USB device task now restores the previously selected endpoint, allowing control requests to be transparently
+  *    handled via interrupts while other endpoints are serviced through polling
+  *  - Fixed device signature being sent in reverse order in the CDC bootloader
+  *  - Host demos now have a separate ConfigDescriptor.c/.h file for configuration descriptor processing
+  *  - HostWithParser demos now have a separate HIDReport.c/.h file for HID report processing and dumping
+  *  - Removed non-mandatory commands from MassStorage demo to save space, fixed SENSE ResponseCode value
+  *  - CDC demos now send empty packets after sending a full one to prevent buffering issues on the host
+  *  - Updated demo descriptors to use VID/PID values donated by Atmel
+  *  - Added DoxyGen documentation to the source files
+  *  - Fixed Serial_IsCharReceived() definition, was previously reversed
+  *  - Removed separate USB_Descriptor_Language_t descriptor, USB_Descriptor_String_t is used instead
+  *  - Removed unused Device Qualifier descriptor structure
+  *  - Renamed the USB_CreateEndpoints event to the more appropriate USB_ConfigurationChanged
+  *  - Fixed MassStorageHost demo reading in the block data in reverse
+  *  - Removed outdated typedefs in StdRequestType.h, superseded by the macro masks
+  *  - Corrected OTG.h is now included when the AVR supports both Host and Device modes, for creating OTG products
+  *  - USB_DeviceEnumerationComplete event is now also fired when in device mode and the host has finished its enumeration
+  *  - Interrupt driven demos now properly restore previously selected endpoint when ISR is complete
+  *  - USB_HOST_TIMEOUT_MS is now overridable in the user project makefile to a custom fixed timeout value
+  *  - Renamed USB_Host_SOFGeneration_* macros to more friendly USB_Host_SuspendBus(), USB_Host_ResumeBus()
+  *    and USB_Host_IsBusSuspended()
+  *  - Renamed *_*_Is* macros to *_Is* to make all flag checking macros consistent, Pipe_SetInterruptFreq() is now
+  *    Pipe_SetInterruptPeriod() to use the correct terminology
+  *  - UnicodeString member of USB_Descriptor_String_t struct changed to an ordinary int array type, so that the GCC
+  *    Unicode strings (prefixed with an L before the opening quotation mark) can be used instead of explicit arrays
+  *    of ASCII characters
+  *  - Fixed Endpoint/Pipes being configured incorrectly if the maximum endpoint/pipe size for the selected USB AVR
+  *    model was given as the bank size
+  *  - HID device demos now use a true raw array for the HID report descriptor rather than a struct wrapped array
+  *  - Added VERSION_BCD() macro, fixed reported HID and USB version numbers in demo descriptors
+  *  - Cleaned up GetDescriptor device chapter 9 handler function
+  *  - Added GET_REPORT class specific request to HID demos to make them complaint to the HID class
+  *  - Cleaned up setting of USB_IsInitialized and USB_IsConnected values to only when needed
+  *  - Removed Atomic.c and ISRMacro.h; the library was already only compatible with recent avr-lib-c for other reasons
+  *  - All demos and library functions now use USB standardized names for the USB data (bRequest, wLength, etc.)
+  *  - Added USE_NONSTANDARD_DESCRIPTOR_NAMES token to switch back to the non-standard descriptor element names
+  *
+  *
+  *  \section Sec_ChangeLog141 Version 1.4.1 - Released 5 May, 2008
+  *
+  *  - Enhanced KeyboardWithParser demo, now prints out pressed alphanumeric characters like the standard demo
+  *  - Fixed MassStorage demo, read/writes using non mode-10 commands now work correctly
+  *  - Corrected version number in Version.h
+  *
+  *
+  *  \section Sec_ChangeLog140 Version 1.4.0 - Released 5 May, 2008
+  *
+  *  - Added HID Report Parser API to the library
+  *  - Added Mouse and Keyboard host demo applications, using the new HID report parser engine
+  *  - Added MouseFullInt demo, which demonstrates a fully interrupt (including control requests) mouse device
+  *  - Fixed incorrect length value in the audio control descriptor of the AudioOutput and AudioInput demos
+  *  - Added MIDI device demo application to the library
+  *  - Fixed problem preventing USB devices from being resumed from a suspended state
+  *  - Added new CDC class bootloader to the library, based on the AVR109 bootloader protocol
+  *  - Added header to each demo application indicating the mode, class, subclass, standards used and supported speed
+  *  - Functions expecting endpoint/pipe numbers are no longer automatically masked against ENDPOINT_EPNUM_MASK or
+  *    PIPE_PIPENUM_MASK - this should be manually added to code which requires it
+  *  - Fixed DFU class bootloader - corrected frequency of flash page writes, greatly reducing programming time
+  *  - Renamed AVR_HOST_GetDeviceConfigDescriptor() to USB_Host_GetDeviceConfigDescriptor() and AVR_HOST_GetNextDescriptor()
+  *    to USB_Host_GetNextDescriptor()
+  *  - Added new USB_Host_GetNextDescriptorOfTypeBefore() and USB_Host_GetNextDescriptorOfTypeAfter() routines
+  *  - Moved configuration descriptor routines to MyUSB/Drivers/USB/Class/, new accompanying ConfigDescriptors.c file
+  *  - Added new configuration descriptor comparator API for more powerful descriptor parsing, updated host demos to use the
+  *    new comparator API
+  *  - Fixed MassStorageHost demo capacity printout, and changed data read/write mode from little-endian to the correct
+  *    big-endian for SCSI devices
+  *  - Fixed macro/function naming consistency; USB_HOST is now USB_Host, USB_DEV is now USB_Device
+  *  - Added better error reporting to host demos
+  *  - Added 10 microsecond delay after addressing devices in host mode, to prevent control stalls
+  *
+  *
+  *  \section Sec_ChangeLog132 Version 1.3.2 - Released April 1st, 2008
+  *
+  *  - Added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes
+  *    are reflected in the hardware
+  *  - Fixed CDC and USBtoSerial demos - Stream commands do not work for control endpoints, and the 
+  *    GetLineCoding request had an incorrect RequestType mask preventing it from being processed
+  *  - Improved reliability of the USBtoSerial demo, adding a busy wait while the buffer is full
+  *  - Device control endpoint size is now determined from the device's descriptors rather than being fixed
+  *  - Separated out SPI code into new SPI driver in AT90USBXXX driver directory
+  *  - Bootloader now returns correct PID for the selected USB AVR model, not just the AT90USB128X PID
+  *  - Added support for the RZUSBSTICK board
+  *  - Bicolour driver removed in favour of generic LEDs driver
+  *  - Added support for the ATMEGA32U4 AVR
+  *  - Added MANUAL_PLL_CONTROL compile time option to prevent the USB library from manipulating the PLL
+  *
+  *
+  *  \section Sec_ChangeLog131 Version 1.3.1 - Released March 19th 2008
+  *
+  *  - Fixed USB to Serial demo - class value in the descriptors was incorrect
+  *  - Control endpoint size changed from 64 bytes to 8 bytes to save on USB FIFO RAM and to allow low
+  *    speed mode devices to enumerate properly
+  *  - USB to Serial demo data endpoints changed to dual-banked 16 byte to allow the demo to work
+  *    on USB AVRs with limited USB FIFO RAM
+  *  - Changed demo endpoint numbers to use endpoints 3 and 4 for double banking, to allow limited
+  *    USB device controller AVRs (AT90USB162, AT90USB82) to function correctly
+  *  - Updated Audio Out demo to use timer 1 for AVRs lacking a timer 3 for the PWM output
+  *  - Fixed incorrect USB_DEV_OPT_HIGHSPEED entry in the Mass Storage device demo makefile
+  *  - Optimized Mass Storage demo for a little extra transfer speed
+  *  - Added LED indicators to the Keyboard demo for Caps Lock, Num Lock and Scroll Lock
+  *  - Added Endpoint_Read_Stream, Endpoint_Write_Stream, Pipe_Read_Stream and Pipe_Write_Stream functions
+  *    (including Big and Little Endian variants)
+  *  - Made Dataflash functions inline for speed, removed now empty Dataflash.c driver file
+  *  - Added new SetSystemClockPrescaler() macro (thanks to Joerg Wunsch)
+  *  - Fixed Endpoint_ClearStall() to function correctly on full USB controller AVRs (AT90USBXXX6/7)
+  *  - Endpoint_Setup_In_Clear() and Endpoint_Setup_Out_Clear() no longer set FIFOCON, in line with the
+  *    directives in the datasheet
+  *  - Fixed PLL prescaler defines for all AVR models and frequencies
+  *  - Fixed ENDPOINT_INT_IN and ENDPOINT_INT_OUT definitions
+  *  - Added interrupt driven keyboard and mouse device demos
+  *  - Combined USB_Device_ClearFeature and USB_Device_SetFeature requests into a single routine for code
+  *    size savings
+  *  - Added missing Pipe_GetCurrentPipe() macro to Pipe.h
+  *
+  *
+  *  \section Sec_ChangeLog130 Version 1.3.0 - Released March 7th 2008
+  *
+  *  - Unnecessary control endpoint config removed from device mode
+  *  - Fixed device standard request interpreter accidentally processing some class-specific requests
+  *  - Added USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS compile time options to instruct the library
+  *    to use descriptors stored in RAM or EEPROM rather than flash memory
+  *  - All demos now disable watchdog on startup, in case it has been enabled by fuses or the bootloader
+  *  - USB_DEV_OPT_LOWSPEED option now works correctly
+  *  - Added ability to set the USB options statically for a binary size reduction via the USE_STATIC_OPTIONS
+  *    compile time define
+  *  - USB_Init no longer takes a Mode parameter if compiled for a USB device with no host mode option, or
+  *    if forced to a particular mode via the USB_HOST_ONLY or USB_DEVICE_ONLY compile time options
+  *  - USB_Init no longer takes an Options parameter if options statically configured by USE_STATIC_OPTIONS
+  *  - Endpoint_Ignore_* and Pipe_Ignore_* made smaller by making the dummy variable non-volatile so that the
+  *    compiler can throw away the result more efficiently
+  *  - Added in an optional GroupID value to each scheduler entry, so that groups of tasks can once again be
+  *    controlled by the new Scheduler_SetGroupTaskMode() routine
+  *  - Added support for AT90USB162 and AT90USB82 AVR models
+  *  - Added support for the STK525 and STK526 boards
+  *  - Added support for custom board drivers to be supplied by selecting the board type as BOARD_USER, and
+  *    placing board drivers in {Application Directory}/Board/
+  *  - PLL is now stopped and USB clock is frozen when detached from host in device mode, to save power
+  *  - Joystick defines are now in synch with the schematics - orientation will be rotated for the USBKEY
+  *  - Fixed USB_DEV_IsUSBSuspended() - now checks the correct register
+  *  - Fixed data transfers to devices when in host mode
+  *  - Renamed USB_DEV_OPT_HIGHSPEED to USB_DEV_OPT_FULLSPEED and USB_HOST_IsDeviceHighSpeed() to
+  *    USB_HOST_IsDeviceFullSpeed() to be in line with the official USB speed names (to avoid confusion with
+  *    the real high speed mode, which is unavailable on the USB AVRs)
+  *
+  *
+  *  \section Sec_ChangeLog120 Version 1.2.0 - Released February 4th, 2008
+  *
+  *  - Added USB_DeviceEnumerationComplete event for host mode
+  *  - Added new Scheduler_Init routine to preprepare the scheduler, so that tasks can be started and
+  *    stopped before the scheduler has been started (via Scheduler_Start)
+  *  - Connection events in both Device and Host mode are now interrupt-driven, allowing the USB management
+  *    task to be stopped when the USB is not connected to a host or device
+  *  - All demos updated to stop the USB task when not in use via the appropriate USB events
+  *  - Mass Storage Host demo application updated to function correctly with all USB flash disks
+  *  - Mass Storage Host demo application now prints out the capacity and number of LUNs in the attached
+  *    device, and prints the first block as hexadecimal numbers rather than ASCII characters
+  *  - Endpoint and Pipe clearing routines now clear the Endpoint/Pipe interrupt and status flags
+  *  - Shifted error handling code in the host enum state machine to a single block, to reduce code complexity
+  *  - Added in DESCRIPTOR_TYPE, DESCRIPTOR_SIZE and DESCRIPTOR_CAST macros to make config descriptor processing
+  *    clearer in USB hosts and DESCRIPTOR_ADDRESS for convenience in USB devices
+  *  - Added in alloca macro to common.h, in case the user is using an old version of avr-lib-c missing the macro
+  *
+  *
+  *  \section Sec_ChangeLog130 Version 1.1.0 - Released January 25th 2008
+  *
+  *  - Fixed DCONNI interrupt being enabled accidentally after a USB reset
+  *  - Fixed DDISCI interrupt not being disabled when a device is not connected
+  *  - Added workaround for powerless pullup devices causing false disconnect interrupts
+  *  - Added USB_DeviceEnumerationFailed event for Host mode
+  *  - AVR_HOST_GetDeviceConfigDescriptor routine no longer modifies ConfigSizePtr if a valid buffer
+  *    pointer is passed
+  *  - Added ALLOCABLE_BYTES to DynAlloc, and added code to make the size of key storage variables
+  *    dependant on size of memory parameters passed in via the user project's makefile
+  *  - Fixed incorrect device reset routine being called in USBTask
+  *  - Devices which do not connect within the standard 300mS are now supported
+  *  - Removed incorrect ATTR_PURE from Scheduler_SetTaskMode(), which was preventing tasks from being
+  *    started/stopped, as well as USB_InitTaskPointer(), which was breaking dual device/host USB projects
+  *  - Changed scheduler to use the task name rather than IDs for setting the task mode, eliminating the
+  *    need to have a task ID list
+  *  - ID transistion interrupt now raises the appropriate device/host disconnect event if device attached
+  *  - Fixed double VBUS change (and VBUS -) event when detatching in device mode
+  *  - Added ability to disable ANSI terminal codes by the defining of DISABLE_TERMINAL_CODES in makefile
+  *  - Removed return from ConfigurePipe and ConfigureEndpoint functions - use Pipe_IsConfigured() and 
+  *    Endpoint_IsConfigured() after calling the config functions to determine success
+  */
diff --git a/LUFA/ManPages/CompileTimeTokens.txt b/LUFA/ManPages/CompileTimeTokens.txt
index 9beeecebe..046101e76 100644
--- a/LUFA/ManPages/CompileTimeTokens.txt
+++ b/LUFA/ManPages/CompileTimeTokens.txt
@@ -1,200 +1,200 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \page Page_TokenSummary Summary of Compile Tokens

- *

- *  The following lists all the possible tokens which can be defined in a project makefile, and passed to the

- *  compiler via the -D switch, to alter the LUFA library code. These tokens may alter the library behaviour,

- *  or remove features unused by a given application in order to save flash space.

- *

- *

- *  \section Sec_SummaryNonUSBTokens Non USB Related Tokens

- *  This section describes compile tokens which affect non-USB sections of the LUFA library.

- *

- *  <b>DISABLE_TERMINAL_CODES</b> - ( \ref Group_Terminal ) \n

- *  If an application contains ANSI terminal control codes listed in TerminalCodes.h, it might be desired to remove them

- *  at compile time for use with a terminal which is non-ANSI control code aware, without modifying the source code. If

- *  this token is defined, all ANSI control codes in the application code from the TerminalCodes.h header are removed from

- *  the source code at compile time.

- *

- *

- *  \section Sec_SummaryUSBClassTokens USB Class Driver Related Tokens

- *  This section describes compile tokens which affect USB class-specific drivers in the LUFA library.

- *

- *  <b>HID_HOST_BOOT_PROTOCOL_ONLY</b> - ( \ref Group_USBClassHIDHost ) \n

- *  By default, the USB HID Host class driver is designed to work with HID devices using either the Boot or Report HID

- *  communication protocols. On devices where the Report protocol is not used (i.e. in applications where only basic

- *  Mouse or Keyboard operation is desired, using boot compatible devices), the code responsible for the Report protocol

- *  mode can be removed to save space in the compiled application by defining this token. When defined, it is still neccesary

- *  to explicitly put the attached device into Boot protocol mode via a call to \ref HID_Host_SetBootProtocol().

- * 

- *  <b>HID_STATETABLE_STACK_DEPTH</b>=<i>x</i> - ( \ref Group_HIDParser ) \n

- *  HID reports may contain PUSH and POP elements, to store and retrieve the current HID state table onto a stack. This

- *  allows for reports to save the state table before modifying it slightly for a data item, and then restore the previous

- *  state table in a compact manner. This token may be defined to a non-zero 8-bit value to give the maximum depth of the state

- *  table stack. If not defined, this defaults to the value indicated in the HID.h file documentation.

- *

- *  <b>HID_USAGE_STACK_DEPTH</b>=<i>x</i> - ( \ref Group_HIDParser ) \n

- *  HID reports generally contain many USAGE elements, which are assigned to INPUT, OUTPUT and FEATURE items in succession

- *  when multiple items are defined at once (via REPORT COUNT elements). This allows for several items to be defined with

- *  different usages in a compact manner. This token may be defined to a non-zero 8-bit value to set the maximum depth of the

- *  usage stack, indicating the maximum number of USAGE items which can be stored temporarily until the next INPUT, OUTPUT

- *  and FEATURE item. If not defined, this defaults to the value indicated in the HID.h file documentation.

- *

- *  <b>HID_MAX_COLLECTIONS</b>=<i>x</i> - ( \ref Group_HIDParser ) \n

- *  HID reports generally contain several COLLECTION elements, used to group related data items together. Collection information

- *  is stored separately in the processed usage structure (and referred to by the data elements in the structure) to save space.

- *  This token may be defined to a non-zero 8-bit value to set the maximum number of COLLECTION items which can be processed by the

- *  parser into the resultant processed report structure. If not defined, this defaults to the value indicated in the HID.h file

- *  documentation.

- *

- *  <b>HID_MAX_REPORTITEMS</b>=<i>x</i> - ( \ref Group_HIDParser ) \n

- *  All HID reports contain one or more INPUT, OUTPUT and/or FEATURE items describing the data which can be sent to and from the HID

- *  device. Each item has associated usages, bit offsets in the item reports and other associated data indicating the manner in which

- *  the report data should be interpreted by the host. This token may be defined to a non-zero 8-bit value to set the maximum number of

- *  data elements which can be stored in the processed HID report structure, including INPUT, OUTPUT and (if enabled) FEATURE items.

- *  If a item has a multiple count (i.e. a REPORT COUNT of more than 1), each item in the report count is placed separately in the

- *  processed HID report table. If not defined, this defaults to the value indicated in the HID.h file documentation.

- *

- *  <b>HID_MAX_REPORT_IDS</b>=<i>x</i> - ( \ref Group_HIDParser ) \n

- *  HID reports may contain several report IDs, to logically distinguish grouped device data from one another - for example, a combination

- *  keyboard and mouse might use report IDs to seperate the keyboard reports from the mouse reports. In order to determine the size of each

- *  report, and thus know how many bytes must be read or written, the size of each report (IN, OUT and FEATURE) must be calculated and

- *  stored. This token may be defined to a non-zero 8-bit value to set the maximum number of report IDs in a device which can be processed

- *  and their sizes calculated/stored into the resultant processed report structure. If not defined, this defaults to the value indicated in

- *  the HID.h file documentation.

- *

- *

- *  \section Sec_SummaryUSBTokens General USB Driver Related Tokens

- *  This section describes compile tokens which affect USB driver stack as a whole in the LUFA library.

- *

- *  <b>NO_STREAM_CALLBACKS</b> - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n

- *  Both the endpoint and the pipe driver code contains stream functions, allowing for arrays of data to be sent to or from the

- *  host easily via a single function call (rather than complex routines worrying about sending full packets, waiting for the endpoint/

- *  pipe to become ready, etc.). By default, these stream functions require a callback function which is executed after each byte processed,

- *  allowing for early-aborts of stream transfers by the application. If callbacks are not required in an application, they can be removed

- *  by defining this token, reducing the compiled binary size. When removed, the stream functions no longer accept a callback function as

- *  a parameter.

- *

- *  <b>FAST_STREAM_TRANSFERS</b> - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n

- *  By default, streams are transferred internally via a loop, sending or receiving one byte per iteration before checking for a bank full

- *  or empty condition. This allows for multiple stream functions to be chained together easily, as there are no alignment issues. However,

- *  this can lead to heavy performance penalties in applications where large streams are used frequently. When this compile time option is

- *  used, bytes are sent or recevied in groups of 8 bytes at a time increasing performance at the expense of a larger flash memory consumption

- *  due to the extra code required to deal with byte alignment.

- *

- *  <b>USE_STATIC_OPTIONS</b>=<i>x</i> - ( \ref Group_USBManagement ) \n

- *  By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad

- *  voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options

- *  mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing

- *  the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an

- *  Options parameter.

- *

- *  <b>USB_DEVICE_ONLY</b> - ( \ref Group_USBManagement ) \n

- *  For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the

- *  mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to

- *  save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevant on smaller USB AVRs which

- *  do not support host mode.

- *

- *  <b>USB_HOST_ONLY</b> - ( \ref Group_USBManagement ) \n

- *  Same as USB_DEVICE_ONLY, except the library is fixed to USB host mode rather than USB device mode. Not available on some USB AVR models.

- *

- *  <b>USB_STREAM_TIMEOUT_MS</b>=<i>x</i> - ( \ref Group_USBManagement ) \n

- *  When endpoint and/or pipe stream functions are used, by default there is a timeout between each transfer which the connected device or host

- *  must satisfy, or the stream function aborts the remaining data transfer. This token may be defined to a non-zero 16-bit value to set the timeout

- *  period for stream transfers, specified in milliseconds. If not defined, the default value specified in LowLevel.h is used instead.

- *

- *  <b>NO_LIMITED_CONTROLLER_CONNECT</b> - ( \ref Group_Events ) \n

- *  On the smaller USB AVRs, the USB controller lacks VBUS events to determine the physical connection state of the USB bus to a host. In lieu of

- *  VBUS events, the library attempts to determine the connection state via the bus suspension and wake up events instead. This however may be

- *  slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is

- *  required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the USB_DeviceState global

- *  can be accurately set and the \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events manually raised by the RAISE_EVENT macro.

- *  When defined, this token disables the library's auto-detection of the connection state by the aforementioned suspension and wake up events.

- *

- *

- *  \section Sec_SummaryUSBDeviceTokens USB Device Mode Driver Related Tokens

- *  This section describes compile tokens which affect USB driver stack of the LUFA library when used in Device mode.

- *

- *  <b>USE_RAM_DESCRIPTORS</b> - ( \ref Group_Descriptors ) \n

- *  Define this token to indicate to the USB driver that all device descriptors are stored in RAM, rather than being located in any one

- *  of the AVR's memory spaces. RAM descriptors may be desirable in applications where the descriptors need to be modified at runtime.

- *

- *  <b>USE_FLASH_DESCRIPTORS</b> - ( \ref Group_Descriptors ) \n

- *  Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's FLASH memory rather than RAM.

- *

- *  <b>USE_EEPROM_DESCRIPTORS</b> - ( \ref Group_Descriptors ) \n

- *  Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's EEPROM memory rather than RAM.

- *

- *  <b>NO_INTERNAL_SERIAL</b> - ( \ref Group_Descriptors ) \n

- *  Some AVR models contain a unique 20-digit serial number which can be used as the device serial number, while in device mode. This

- *  allows the host to uniquely identify the device regardless of if it is moved between USB ports on the same computer, allowing

- *  allocated resources (such as drivers, COM Port number allocations) to be preserved. This is not needed in many apps, and so the

- *  code that performs this task can be disabled by defining this option and passing it to the compiler via the -D switch.

- *

- *  <b>FIXED_CONTROL_ENDPOINT_SIZE</b>=<i>x</i> - ( \ref Group_EndpointManagement ) \n

- *  By default, the library determines the size of the control endpoint (when in device mode) by reading the device descriptor.

- *  Normally this reduces the amount of configuration required for the library, allows the value to change dynamically (if

- *  descriptors are stored in EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this token can be

- *  defined to a non-zero value instead to give the size in bytes of the control endpoint, to reduce the size of the compiled

- *  binary.

- *

- *  <b>DEVICE_STATE_AS_GPIOR</b> - ( \ref Group_Device ) \n

- *  One of the most frequenty used global variables in the stack is the USB_DeviceState global, which indicates the current state of

- *  the Device State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token

- *  may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR

- *  reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except

- *  implicitly via the library APIs.

- *

- *  <b>FIXED_NUM_CONFIGURATIONS</b>=<i>x</i> - ( \ref Group_Device ) \n

- *  By default, the library determines the number of configurations a USB device supports by reading the device descriptor. This reduces

- *  the amount of configuration required to set up the library, and allows the value to change dynamically (if descriptors are stored in

- *  EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this value may be fixed via this token in the project

- *  makefile to reduce the compiled size of the binary at the expense of flexibility.

- *

- *  <b>CONTROL_ONLY_DEVICE</b> \n

- *  In some limited USB device applications, there are no device endpoints other than the control endpoint; i.e. all device communication

- *  is through control endpoint requests. Defining this token will remove several features related to the selection and control of device

- *  endpoints internally, saving space. Generally, this is usually only useful in (some) bootloaders and is best avoided.

- *

- *  <b>INTERRUPT_CONTROL_ENDPOINT</b> - ( \ref Group_USBManagement ) \n

- *  Some applications prefer to not call the USB_USBTask() management task reguarly while in device mode, as it can complicate code significantly.

- *  Instead, when device mode is used this token can be passed to the library via the -D switch to allow the library to manage the USB control

- *  endpoint entirely via USB controller interrupts asynchronously to the user application. When defined, USB_USBTask() does not need to be called

- *  when in USB device mode.

- *

- *  <b>NO_DEVICE_REMOTE_WAKEUP</b> - (\ref Group_Device ) \n

- *  Many devices do not require the use of the Remote Wakeup features of USB, used to wake up the USB host when suspended. On these devices,

- *  the code required to manage device Remote Wakeup can be disabled by defining this token and passing it to the library via the -D switch.

- *

- *  <b>NO_DEVICE_SELF_POWER</b> - (\ref Group_Device ) \n

- *  USB devices may be bus powered, self powered, or a combination of both. When a device can be both bus powered and self powered, the host may

- *  query the device to determine the current power source, via \ref USB_CurrentlySelfPowered. For solely bus powered devices, this global and the

- *  code required to manage it may be disabled by passing this token to the library via the -D switch.

- *

- *

- *  \section Sec_SummaryUSBHostTokens USB Host Mode Driver Related Tokens

- *

- *  This section describes compile tokens which affect USB driver stack of the LUFA library when used in Host mode.

- *

- *  <b>HOST_STATE_AS_GPIOR</b> - ( \ref Group_Host ) \n

- *  One of the most frequenty used global variables in the stack is the USB_HostState global, which indicates the current state of

- *  the Host State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token

- *  may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR

- *  reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except

- *  implicitly via the library APIs.

- *

- *  <b>USB_HOST_TIMEOUT_MS</b>=<i>x</i> - ( \ref Group_Host ) \n

- *  When a control transfer is initiated in host mode to an attached device, a timeout is used to abort the transfer if the attached

- *  device fails to respond within the timeout period. This token may be defined to a non-zero 16-bit value to set the timeout period for

- *  control transfers, specified in milliseconds. If not defined, the default value specified in Host.h is used instead.

- *

- *  <b>HOST_DEVICE_SETTLE_DELAY_MS</b>=<i>x</i> - ( \ref Group_Host ) \n

- *  Some devices require a delay of up to 5 seconds after they are connected to VBUS before the enumeration process can be started, or

- *  they will fail to enumerate correctly. By placing a delay before the enumeration process, it can be ensured that the bus has settled

- *  back to a known idle state before communications occur with the device. This token may be defined to a 16-bit value to set the device

- *  settle period, specified in milliseconds. If not defined, the default value specified in Host.h is used instead.

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \page Page_TokenSummary Summary of Compile Tokens
+ *
+ *  The following lists all the possible tokens which can be defined in a project makefile, and passed to the
+ *  compiler via the -D switch, to alter the LUFA library code. These tokens may alter the library behaviour,
+ *  or remove features unused by a given application in order to save flash space.
+ *
+ *
+ *  \section Sec_SummaryNonUSBTokens Non USB Related Tokens
+ *  This section describes compile tokens which affect non-USB sections of the LUFA library.
+ *
+ *  <b>DISABLE_TERMINAL_CODES</b> - ( \ref Group_Terminal ) \n
+ *  If an application contains ANSI terminal control codes listed in TerminalCodes.h, it might be desired to remove them
+ *  at compile time for use with a terminal which is non-ANSI control code aware, without modifying the source code. If
+ *  this token is defined, all ANSI control codes in the application code from the TerminalCodes.h header are removed from
+ *  the source code at compile time.
+ *
+ *
+ *  \section Sec_SummaryUSBClassTokens USB Class Driver Related Tokens
+ *  This section describes compile tokens which affect USB class-specific drivers in the LUFA library.
+ *
+ *  <b>HID_HOST_BOOT_PROTOCOL_ONLY</b> - ( \ref Group_USBClassHIDHost ) \n
+ *  By default, the USB HID Host class driver is designed to work with HID devices using either the Boot or Report HID
+ *  communication protocols. On devices where the Report protocol is not used (i.e. in applications where only basic
+ *  Mouse or Keyboard operation is desired, using boot compatible devices), the code responsible for the Report protocol
+ *  mode can be removed to save space in the compiled application by defining this token. When defined, it is still neccesary
+ *  to explicitly put the attached device into Boot protocol mode via a call to \ref HID_Host_SetBootProtocol().
+ * 
+ *  <b>HID_STATETABLE_STACK_DEPTH</b>=<i>x</i> - ( \ref Group_HIDParser ) \n
+ *  HID reports may contain PUSH and POP elements, to store and retrieve the current HID state table onto a stack. This
+ *  allows for reports to save the state table before modifying it slightly for a data item, and then restore the previous
+ *  state table in a compact manner. This token may be defined to a non-zero 8-bit value to give the maximum depth of the state
+ *  table stack. If not defined, this defaults to the value indicated in the HID.h file documentation.
+ *
+ *  <b>HID_USAGE_STACK_DEPTH</b>=<i>x</i> - ( \ref Group_HIDParser ) \n
+ *  HID reports generally contain many USAGE elements, which are assigned to INPUT, OUTPUT and FEATURE items in succession
+ *  when multiple items are defined at once (via REPORT COUNT elements). This allows for several items to be defined with
+ *  different usages in a compact manner. This token may be defined to a non-zero 8-bit value to set the maximum depth of the
+ *  usage stack, indicating the maximum number of USAGE items which can be stored temporarily until the next INPUT, OUTPUT
+ *  and FEATURE item. If not defined, this defaults to the value indicated in the HID.h file documentation.
+ *
+ *  <b>HID_MAX_COLLECTIONS</b>=<i>x</i> - ( \ref Group_HIDParser ) \n
+ *  HID reports generally contain several COLLECTION elements, used to group related data items together. Collection information
+ *  is stored separately in the processed usage structure (and referred to by the data elements in the structure) to save space.
+ *  This token may be defined to a non-zero 8-bit value to set the maximum number of COLLECTION items which can be processed by the
+ *  parser into the resultant processed report structure. If not defined, this defaults to the value indicated in the HID.h file
+ *  documentation.
+ *
+ *  <b>HID_MAX_REPORTITEMS</b>=<i>x</i> - ( \ref Group_HIDParser ) \n
+ *  All HID reports contain one or more INPUT, OUTPUT and/or FEATURE items describing the data which can be sent to and from the HID
+ *  device. Each item has associated usages, bit offsets in the item reports and other associated data indicating the manner in which
+ *  the report data should be interpreted by the host. This token may be defined to a non-zero 8-bit value to set the maximum number of
+ *  data elements which can be stored in the processed HID report structure, including INPUT, OUTPUT and (if enabled) FEATURE items.
+ *  If a item has a multiple count (i.e. a REPORT COUNT of more than 1), each item in the report count is placed separately in the
+ *  processed HID report table. If not defined, this defaults to the value indicated in the HID.h file documentation.
+ *
+ *  <b>HID_MAX_REPORT_IDS</b>=<i>x</i> - ( \ref Group_HIDParser ) \n
+ *  HID reports may contain several report IDs, to logically distinguish grouped device data from one another - for example, a combination
+ *  keyboard and mouse might use report IDs to seperate the keyboard reports from the mouse reports. In order to determine the size of each
+ *  report, and thus know how many bytes must be read or written, the size of each report (IN, OUT and FEATURE) must be calculated and
+ *  stored. This token may be defined to a non-zero 8-bit value to set the maximum number of report IDs in a device which can be processed
+ *  and their sizes calculated/stored into the resultant processed report structure. If not defined, this defaults to the value indicated in
+ *  the HID.h file documentation.
+ *
+ *
+ *  \section Sec_SummaryUSBTokens General USB Driver Related Tokens
+ *  This section describes compile tokens which affect USB driver stack as a whole in the LUFA library.
+ *
+ *  <b>NO_STREAM_CALLBACKS</b> - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n
+ *  Both the endpoint and the pipe driver code contains stream functions, allowing for arrays of data to be sent to or from the
+ *  host easily via a single function call (rather than complex routines worrying about sending full packets, waiting for the endpoint/
+ *  pipe to become ready, etc.). By default, these stream functions require a callback function which is executed after each byte processed,
+ *  allowing for early-aborts of stream transfers by the application. If callbacks are not required in an application, they can be removed
+ *  by defining this token, reducing the compiled binary size. When removed, the stream functions no longer accept a callback function as
+ *  a parameter.
+ *
+ *  <b>FAST_STREAM_TRANSFERS</b> - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n
+ *  By default, streams are transferred internally via a loop, sending or receiving one byte per iteration before checking for a bank full
+ *  or empty condition. This allows for multiple stream functions to be chained together easily, as there are no alignment issues. However,
+ *  this can lead to heavy performance penalties in applications where large streams are used frequently. When this compile time option is
+ *  used, bytes are sent or recevied in groups of 8 bytes at a time increasing performance at the expense of a larger flash memory consumption
+ *  due to the extra code required to deal with byte alignment.
+ *
+ *  <b>USE_STATIC_OPTIONS</b>=<i>x</i> - ( \ref Group_USBManagement ) \n
+ *  By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad
+ *  voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options
+ *  mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing
+ *  the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an
+ *  Options parameter.
+ *
+ *  <b>USB_DEVICE_ONLY</b> - ( \ref Group_USBManagement ) \n
+ *  For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the
+ *  mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to
+ *  save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevant on smaller USB AVRs which
+ *  do not support host mode.
+ *
+ *  <b>USB_HOST_ONLY</b> - ( \ref Group_USBManagement ) \n
+ *  Same as USB_DEVICE_ONLY, except the library is fixed to USB host mode rather than USB device mode. Not available on some USB AVR models.
+ *
+ *  <b>USB_STREAM_TIMEOUT_MS</b>=<i>x</i> - ( \ref Group_USBManagement ) \n
+ *  When endpoint and/or pipe stream functions are used, by default there is a timeout between each transfer which the connected device or host
+ *  must satisfy, or the stream function aborts the remaining data transfer. This token may be defined to a non-zero 16-bit value to set the timeout
+ *  period for stream transfers, specified in milliseconds. If not defined, the default value specified in LowLevel.h is used instead.
+ *
+ *  <b>NO_LIMITED_CONTROLLER_CONNECT</b> - ( \ref Group_Events ) \n
+ *  On the smaller USB AVRs, the USB controller lacks VBUS events to determine the physical connection state of the USB bus to a host. In lieu of
+ *  VBUS events, the library attempts to determine the connection state via the bus suspension and wake up events instead. This however may be
+ *  slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is
+ *  required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the USB_DeviceState global
+ *  can be accurately set and the \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events manually raised by the RAISE_EVENT macro.
+ *  When defined, this token disables the library's auto-detection of the connection state by the aforementioned suspension and wake up events.
+ *
+ *
+ *  \section Sec_SummaryUSBDeviceTokens USB Device Mode Driver Related Tokens
+ *  This section describes compile tokens which affect USB driver stack of the LUFA library when used in Device mode.
+ *
+ *  <b>USE_RAM_DESCRIPTORS</b> - ( \ref Group_Descriptors ) \n
+ *  Define this token to indicate to the USB driver that all device descriptors are stored in RAM, rather than being located in any one
+ *  of the AVR's memory spaces. RAM descriptors may be desirable in applications where the descriptors need to be modified at runtime.
+ *
+ *  <b>USE_FLASH_DESCRIPTORS</b> - ( \ref Group_Descriptors ) \n
+ *  Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's FLASH memory rather than RAM.
+ *
+ *  <b>USE_EEPROM_DESCRIPTORS</b> - ( \ref Group_Descriptors ) \n
+ *  Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's EEPROM memory rather than RAM.
+ *
+ *  <b>NO_INTERNAL_SERIAL</b> - ( \ref Group_Descriptors ) \n
+ *  Some AVR models contain a unique 20-digit serial number which can be used as the device serial number, while in device mode. This
+ *  allows the host to uniquely identify the device regardless of if it is moved between USB ports on the same computer, allowing
+ *  allocated resources (such as drivers, COM Port number allocations) to be preserved. This is not needed in many apps, and so the
+ *  code that performs this task can be disabled by defining this option and passing it to the compiler via the -D switch.
+ *
+ *  <b>FIXED_CONTROL_ENDPOINT_SIZE</b>=<i>x</i> - ( \ref Group_EndpointManagement ) \n
+ *  By default, the library determines the size of the control endpoint (when in device mode) by reading the device descriptor.
+ *  Normally this reduces the amount of configuration required for the library, allows the value to change dynamically (if
+ *  descriptors are stored in EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this token can be
+ *  defined to a non-zero value instead to give the size in bytes of the control endpoint, to reduce the size of the compiled
+ *  binary.
+ *
+ *  <b>DEVICE_STATE_AS_GPIOR</b> - ( \ref Group_Device ) \n
+ *  One of the most frequenty used global variables in the stack is the USB_DeviceState global, which indicates the current state of
+ *  the Device State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token
+ *  may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR
+ *  reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except
+ *  implicitly via the library APIs.
+ *
+ *  <b>FIXED_NUM_CONFIGURATIONS</b>=<i>x</i> - ( \ref Group_Device ) \n
+ *  By default, the library determines the number of configurations a USB device supports by reading the device descriptor. This reduces
+ *  the amount of configuration required to set up the library, and allows the value to change dynamically (if descriptors are stored in
+ *  EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this value may be fixed via this token in the project
+ *  makefile to reduce the compiled size of the binary at the expense of flexibility.
+ *
+ *  <b>CONTROL_ONLY_DEVICE</b> \n
+ *  In some limited USB device applications, there are no device endpoints other than the control endpoint; i.e. all device communication
+ *  is through control endpoint requests. Defining this token will remove several features related to the selection and control of device
+ *  endpoints internally, saving space. Generally, this is usually only useful in (some) bootloaders and is best avoided.
+ *
+ *  <b>INTERRUPT_CONTROL_ENDPOINT</b> - ( \ref Group_USBManagement ) \n
+ *  Some applications prefer to not call the USB_USBTask() management task reguarly while in device mode, as it can complicate code significantly.
+ *  Instead, when device mode is used this token can be passed to the library via the -D switch to allow the library to manage the USB control
+ *  endpoint entirely via USB controller interrupts asynchronously to the user application. When defined, USB_USBTask() does not need to be called
+ *  when in USB device mode.
+ *
+ *  <b>NO_DEVICE_REMOTE_WAKEUP</b> - (\ref Group_Device ) \n
+ *  Many devices do not require the use of the Remote Wakeup features of USB, used to wake up the USB host when suspended. On these devices,
+ *  the code required to manage device Remote Wakeup can be disabled by defining this token and passing it to the library via the -D switch.
+ *
+ *  <b>NO_DEVICE_SELF_POWER</b> - (\ref Group_Device ) \n
+ *  USB devices may be bus powered, self powered, or a combination of both. When a device can be both bus powered and self powered, the host may
+ *  query the device to determine the current power source, via \ref USB_CurrentlySelfPowered. For solely bus powered devices, this global and the
+ *  code required to manage it may be disabled by passing this token to the library via the -D switch.
+ *
+ *
+ *  \section Sec_SummaryUSBHostTokens USB Host Mode Driver Related Tokens
+ *
+ *  This section describes compile tokens which affect USB driver stack of the LUFA library when used in Host mode.
+ *
+ *  <b>HOST_STATE_AS_GPIOR</b> - ( \ref Group_Host ) \n
+ *  One of the most frequenty used global variables in the stack is the USB_HostState global, which indicates the current state of
+ *  the Host State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token
+ *  may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR
+ *  reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except
+ *  implicitly via the library APIs.
+ *
+ *  <b>USB_HOST_TIMEOUT_MS</b>=<i>x</i> - ( \ref Group_Host ) \n
+ *  When a control transfer is initiated in host mode to an attached device, a timeout is used to abort the transfer if the attached
+ *  device fails to respond within the timeout period. This token may be defined to a non-zero 16-bit value to set the timeout period for
+ *  control transfers, specified in milliseconds. If not defined, the default value specified in Host.h is used instead.
+ *
+ *  <b>HOST_DEVICE_SETTLE_DELAY_MS</b>=<i>x</i> - ( \ref Group_Host ) \n
+ *  Some devices require a delay of up to 5 seconds after they are connected to VBUS before the enumeration process can be started, or
+ *  they will fail to enumerate correctly. By placing a delay before the enumeration process, it can be ensured that the bus has settled
+ *  back to a known idle state before communications occur with the device. This token may be defined to a 16-bit value to set the device
+ *  settle period, specified in milliseconds. If not defined, the default value specified in Host.h is used instead.
+ */
diff --git a/LUFA/ManPages/CompilingApps.txt b/LUFA/ManPages/CompilingApps.txt
index b4ee17171..60c5a8ae2 100644
--- a/LUFA/ManPages/CompilingApps.txt
+++ b/LUFA/ManPages/CompilingApps.txt
@@ -1,30 +1,30 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

- 

-/** \page Page_CompilingApps Compiling the Demos, Bootloaders and Projects

- *

- *  The following details how to compile the included LUFA demos, applications and bootloaders using AVR-GCC.

- *

- *  \section Sec_Prerequisites Prerequisites

- *  Before you can compile any of the LUFA library code or demos, you will need a recent distribution of avr-libc (1.6.2+)

- *  and the AVR-GCC (4.2+) compiler. For Windows users, the best way to obtain these is the WinAVR project

- *  (<a>http://winavr.sourceforge.net</a>) as this provides a single-file setup for everything required to compile your

- *  own AVR projects.

- *

- *  \section Sec_Compiling Compiling a LUFA Application

- *  Compiling the LUFA demos, applications and/or bootloaders is very simple. LUFA comes with makefile scripts for

- *  each individual demo, bootloader and project folder, as well as scripts in the /Demos/, /Bootloaders/, /Projects/

- *  and the LUFA root directory. This means that compilation can be started from any of the above directories, with

- *  a build started from an upper directory in the directory structure executing build of all child directories under it.

- *  This means that while a build inside a particular demo directory will build only that particular demo, a build stated

- *  from the /Demos/ directory will build all LUFA demo projects sequentially.

- *

- *  To build a project from the source via the command line, the command <b>"make all"</b> should be executed from the command line in the directory

- *  of interest. To remove compiled files (including the binary output, all intermediately files and all diagnostic output

- *  files), execute <b>"make clean"</b>. Once a "make all" has been run and no errors were encountered, the resulting binary will

- *  be located in the generated ".HEX" file. If your project makes use of pre-initialized EEPROM variables, the generated ".EEP"

- *  file will contain the project's EEPROM data.

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+ 
+/** \page Page_CompilingApps Compiling the Demos, Bootloaders and Projects
+ *
+ *  The following details how to compile the included LUFA demos, applications and bootloaders using AVR-GCC.
+ *
+ *  \section Sec_Prerequisites Prerequisites
+ *  Before you can compile any of the LUFA library code or demos, you will need a recent distribution of avr-libc (1.6.2+)
+ *  and the AVR-GCC (4.2+) compiler. For Windows users, the best way to obtain these is the WinAVR project
+ *  (<a>http://winavr.sourceforge.net</a>) as this provides a single-file setup for everything required to compile your
+ *  own AVR projects.
+ *
+ *  \section Sec_Compiling Compiling a LUFA Application
+ *  Compiling the LUFA demos, applications and/or bootloaders is very simple. LUFA comes with makefile scripts for
+ *  each individual demo, bootloader and project folder, as well as scripts in the /Demos/, /Bootloaders/, /Projects/
+ *  and the LUFA root directory. This means that compilation can be started from any of the above directories, with
+ *  a build started from an upper directory in the directory structure executing build of all child directories under it.
+ *  This means that while a build inside a particular demo directory will build only that particular demo, a build stated
+ *  from the /Demos/ directory will build all LUFA demo projects sequentially.
+ *
+ *  To build a project from the source via the command line, the command <b>"make all"</b> should be executed from the command line in the directory
+ *  of interest. To remove compiled files (including the binary output, all intermediately files and all diagnostic output
+ *  files), execute <b>"make clean"</b>. Once a "make all" has been run and no errors were encountered, the resulting binary will
+ *  be located in the generated ".HEX" file. If your project makes use of pre-initialized EEPROM variables, the generated ".EEP"
+ *  file will contain the project's EEPROM data.
  */
\ No newline at end of file
diff --git a/LUFA/ManPages/ConfiguringApps.txt b/LUFA/ManPages/ConfiguringApps.txt
index fb9da7094..058d79b1f 100644
--- a/LUFA/ManPages/ConfiguringApps.txt
+++ b/LUFA/ManPages/ConfiguringApps.txt
@@ -1,87 +1,87 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

- 

-/** \page Page_ConfiguringApps Configuring the Demos, Bootloaders and Projects

- *

- *  If the target AVR model, clock speed, board or other settings are different to the current settings, they must be changed

- *  and the project recompiled from the source code before being programmed into the AVR microcontroller. Most project

- *  configuration options are located in the "makefile" build script inside each LUFA application's folder, however some

- *  demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in the

- *  main .c source file of the project. See each project's individual documentation for application-specific configuration

- *  values.

- *

- *  Each project "makefile" contains all the script and configuration data required to compile each project. When opened with

- *  any regular basic text editor such as Notepad or WordPad (ensure that the save format is a pure ASCII text format) the

- *  build configuration settings may be altered.

- *

- *  Inside each makefile, a number of configuration variables are located, with the format "<VARIABLE NAME> = <VALUE>". For

- *  each application, the important variables which should be altered are:

- *

- *    - <b>MCU</b>, the target AVR processor.

- *    - <b>BOARD</b>, the target board hardware

- *    - <b>F_CLOCK</b>, the target raw master clock frequency, before any prescaling is performed

- *    - <b>F_CPU</b>, the target AVR CPU master clock frequency, after any prescaling

- *    - <b>CDEFS</b>, the C preprocessor defines which configure options the source code

- *    - <b>LUFA_PATH</b>, the path to the LUFA library source code

- *    - <b>LUFA_OPTS</b>, the compile time LUFA options which configure the library features

- *

- *  These values should be changed to reflect the build hardware.

- *

- *  \section Sec_MCU The MCU Parameter

- *  This parameter indicates the target AVR model for the compiled application. This should be set to the model of the target AVR

- *  (such as the AT90USB1287, or the ATMEGA32U4), in all lower-case (e.g. "at90usb1287"). Note that not all demos support all the

- *  USB AVR models, as they may make use of peripherals or modes only present in some devices.

- *

- *  For supported library AVR models, see main documentation page.

- *

- *  \section Sec_BOARD The BOARD Parameter

- *  This parameter indicates the target AVR board hardware for the compiled application. Some LUFA library drivers are board-specific,

- *  such as the LED driver, and the library needs to know the layout of the target board. If you are using one of the board models listed

- *  on the main library page, change this parameter to the board name in all UPPER-case.

- *

- *  If you are not using any board-specific drivers in the LUFA library, or you are using a custom board layout, change this to read

- *  "USER" (no quotes) instead of a standard board name. If the USER board type is selected and the application makes use of one or more

- *  board-specific hardware drivers inside the LUFA library, then the appropriate stub drives files should be copied from the /BoardStubs/

- *  directory into a /Board/ folder inside the application directory, and the stub driver completed with the appropriate code to drive the

- *  custom board's hardware.

- *

- *  \section Sec_F_CLOCK The F_CLOCK Parameter

- *  This parameter indicates the target AVR's input clock frequency, in Hz. This is the actual clock input, before any prescaling is performed. In the

- *  USB AVR architecture, the input clock before any prescaling is fed directly to the PLL subsystem, and thus the PLL is derived directly from the

- *  clock input. The PLL then feeds the USB and other sections of the AVR with the correct upscaled frequencies required for those sections to function.

- *

- *  <b>Note that this value does not actually *alter* the AVR's input clock frequency</b>, it is just a way to indicate to the library the clock frequency

- *  of the AVR as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more

- *  library components will occur.

- *

- *  \section Sec_F_CPU The F_CPU Parameter

- *  This parameter indicates the target AVR's master CPU clock frequency, in Hz.

- *

- *  <b>Note that this value does not actually *alter* the AVR's CPU clock frequency</b>, it is just a way to indicate to the library the clock frequency

- *  of the AVR core as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more

- *  library components will occur.

- *

- *  \section Sec_CDEFS The CDEFS Parameter

- *  Many applications have features which can be controlled by the defining of specially named preprocessor tokens at the point of compilation - for example,

- *  an application might use a compile time token to turn on or off optional or mutually exclusive portions of code. Preprocessor tokens can be

- *  defined here by listing each one with the -D command line switch, and each token can optionally be defined to a specific value. When defined in the

- *  project makefile, these behave as if they were defined in every source file via a normal preprocessor define statement.

- *

- *  Most applications will actually have multiple CDEF lines, which are concatenated together with the "+=" operator. This ensures that large

- *  numbers of configuration options remain readable by splitting up groups of options into separate lines.

- *

- *  \section Sec_LUFA_PATH The LUFA_PATH Parameter

- *  As each LUFA program requires the LUFA library source code to compile correctly, the application must know where the LUFA library is located. This

- *  value specifies the path to the LUFA library base relative to the path of the project makefile.

- *

- *  \section Sec_LUFA_OPTS The LUFA_OPTS Parameter

- *  This value is similar to the CDEFS parameter listed elsewhere -- indeed, it is simply a convenient place to group LUFA related tokens away from the

- *  application's compile time tokens. Normally, these options do not need to be altered to allow an application to compile and run correctly on a

- *  different board or AVR to the current configuration - if the options are incorrect, then the demo is most likely incompatible with the chosen USB AVR

- *  model and cannot be made to function through the altering of the makefile settings alone (or at all). Settings such as the USB mode (device, host or both),

- *  the USB interface speed (Low or Full speed) and other LUFA configuration options can be set here - see \ref Page_TokenSummary documentation for details

- *  on the available LUFA compile time configuration options.

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+ 
+/** \page Page_ConfiguringApps Configuring the Demos, Bootloaders and Projects
+ *
+ *  If the target AVR model, clock speed, board or other settings are different to the current settings, they must be changed
+ *  and the project recompiled from the source code before being programmed into the AVR microcontroller. Most project
+ *  configuration options are located in the "makefile" build script inside each LUFA application's folder, however some
+ *  demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in the
+ *  main .c source file of the project. See each project's individual documentation for application-specific configuration
+ *  values.
+ *
+ *  Each project "makefile" contains all the script and configuration data required to compile each project. When opened with
+ *  any regular basic text editor such as Notepad or WordPad (ensure that the save format is a pure ASCII text format) the
+ *  build configuration settings may be altered.
+ *
+ *  Inside each makefile, a number of configuration variables are located, with the format "<VARIABLE NAME> = <VALUE>". For
+ *  each application, the important variables which should be altered are:
+ *
+ *    - <b>MCU</b>, the target AVR processor.
+ *    - <b>BOARD</b>, the target board hardware
+ *    - <b>F_CLOCK</b>, the target raw master clock frequency, before any prescaling is performed
+ *    - <b>F_CPU</b>, the target AVR CPU master clock frequency, after any prescaling
+ *    - <b>CDEFS</b>, the C preprocessor defines which configure options the source code
+ *    - <b>LUFA_PATH</b>, the path to the LUFA library source code
+ *    - <b>LUFA_OPTS</b>, the compile time LUFA options which configure the library features
+ *
+ *  These values should be changed to reflect the build hardware.
+ *
+ *  \section Sec_MCU The MCU Parameter
+ *  This parameter indicates the target AVR model for the compiled application. This should be set to the model of the target AVR
+ *  (such as the AT90USB1287, or the ATMEGA32U4), in all lower-case (e.g. "at90usb1287"). Note that not all demos support all the
+ *  USB AVR models, as they may make use of peripherals or modes only present in some devices.
+ *
+ *  For supported library AVR models, see main documentation page.
+ *
+ *  \section Sec_BOARD The BOARD Parameter
+ *  This parameter indicates the target AVR board hardware for the compiled application. Some LUFA library drivers are board-specific,
+ *  such as the LED driver, and the library needs to know the layout of the target board. If you are using one of the board models listed
+ *  on the main library page, change this parameter to the board name in all UPPER-case.
+ *
+ *  If you are not using any board-specific drivers in the LUFA library, or you are using a custom board layout, change this to read
+ *  "USER" (no quotes) instead of a standard board name. If the USER board type is selected and the application makes use of one or more
+ *  board-specific hardware drivers inside the LUFA library, then the appropriate stub drives files should be copied from the /BoardStubs/
+ *  directory into a /Board/ folder inside the application directory, and the stub driver completed with the appropriate code to drive the
+ *  custom board's hardware.
+ *
+ *  \section Sec_F_CLOCK The F_CLOCK Parameter
+ *  This parameter indicates the target AVR's input clock frequency, in Hz. This is the actual clock input, before any prescaling is performed. In the
+ *  USB AVR architecture, the input clock before any prescaling is fed directly to the PLL subsystem, and thus the PLL is derived directly from the
+ *  clock input. The PLL then feeds the USB and other sections of the AVR with the correct upscaled frequencies required for those sections to function.
+ *
+ *  <b>Note that this value does not actually *alter* the AVR's input clock frequency</b>, it is just a way to indicate to the library the clock frequency
+ *  of the AVR as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more
+ *  library components will occur.
+ *
+ *  \section Sec_F_CPU The F_CPU Parameter
+ *  This parameter indicates the target AVR's master CPU clock frequency, in Hz.
+ *
+ *  <b>Note that this value does not actually *alter* the AVR's CPU clock frequency</b>, it is just a way to indicate to the library the clock frequency
+ *  of the AVR core as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more
+ *  library components will occur.
+ *
+ *  \section Sec_CDEFS The CDEFS Parameter
+ *  Many applications have features which can be controlled by the defining of specially named preprocessor tokens at the point of compilation - for example,
+ *  an application might use a compile time token to turn on or off optional or mutually exclusive portions of code. Preprocessor tokens can be
+ *  defined here by listing each one with the -D command line switch, and each token can optionally be defined to a specific value. When defined in the
+ *  project makefile, these behave as if they were defined in every source file via a normal preprocessor define statement.
+ *
+ *  Most applications will actually have multiple CDEF lines, which are concatenated together with the "+=" operator. This ensures that large
+ *  numbers of configuration options remain readable by splitting up groups of options into separate lines.
+ *
+ *  \section Sec_LUFA_PATH The LUFA_PATH Parameter
+ *  As each LUFA program requires the LUFA library source code to compile correctly, the application must know where the LUFA library is located. This
+ *  value specifies the path to the LUFA library base relative to the path of the project makefile.
+ *
+ *  \section Sec_LUFA_OPTS The LUFA_OPTS Parameter
+ *  This value is similar to the CDEFS parameter listed elsewhere -- indeed, it is simply a convenient place to group LUFA related tokens away from the
+ *  application's compile time tokens. Normally, these options do not need to be altered to allow an application to compile and run correctly on a
+ *  different board or AVR to the current configuration - if the options are incorrect, then the demo is most likely incompatible with the chosen USB AVR
+ *  model and cannot be made to function through the altering of the makefile settings alone (or at all). Settings such as the USB mode (device, host or both),
+ *  the USB interface speed (Low or Full speed) and other LUFA configuration options can be set here - see \ref Page_TokenSummary documentation for details
+ *  on the available LUFA compile time configuration options.
  */
\ No newline at end of file
diff --git a/LUFA/ManPages/DevelopingWithLUFA.txt b/LUFA/ManPages/DevelopingWithLUFA.txt
index eb079baab..1981a4990 100644
--- a/LUFA/ManPages/DevelopingWithLUFA.txt
+++ b/LUFA/ManPages/DevelopingWithLUFA.txt
@@ -1,22 +1,22 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/**

- *  \page Page_DevelopingWithLUFA Developing With LUFA

- *

- *  This section of the manual contains information on LUFA development, such as Getting Started information,

- *  information on compile-time tuning of the library and other developer-related sections.

- *

- *  <b>Subsections:</b>

- *  - \subpage Page_TokenSummary Summary of Compile Time Tokens

- *  - \subpage Page_Migration Migrating from an Older LUFA Version

- *  - \subpage Page_VIDPID Allocated USB VID and PID Values

- *  - \subpage Page_BuildLibrary Building as a Linkable Library

- *  - \subpage Page_WritingBoardDrivers How to Write Custom Board Drivers

- *  - \subpage Page_SoftwareBootloaderStart How to jump to the bootloader in software

- *  - \subpage Page_SchedulerOverview Overview of the Simple LUFA Scheduler (DEPRECATED)

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/**
+ *  \page Page_DevelopingWithLUFA Developing With LUFA
+ *
+ *  This section of the manual contains information on LUFA development, such as Getting Started information,
+ *  information on compile-time tuning of the library and other developer-related sections.
+ *
+ *  <b>Subsections:</b>
+ *  - \subpage Page_TokenSummary Summary of Compile Time Tokens
+ *  - \subpage Page_Migration Migrating from an Older LUFA Version
+ *  - \subpage Page_VIDPID Allocated USB VID and PID Values
+ *  - \subpage Page_BuildLibrary Building as a Linkable Library
+ *  - \subpage Page_WritingBoardDrivers How to Write Custom Board Drivers
+ *  - \subpage Page_SoftwareBootloaderStart How to jump to the bootloader in software
+ *  - \subpage Page_SchedulerOverview Overview of the Simple LUFA Scheduler (DEPRECATED)
+ */
  
\ No newline at end of file
diff --git a/LUFA/ManPages/DeviceSupport.txt b/LUFA/ManPages/DeviceSupport.txt
index c16def7b4..47cfc4ad7 100644
--- a/LUFA/ManPages/DeviceSupport.txt
+++ b/LUFA/ManPages/DeviceSupport.txt
@@ -1,41 +1,41 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/**

- *  \page Page_DeviceSupport Device and Hardware Support

- *

- *  Currently supported AVR models:

- *   - AT90USB82 (USB Device Only)

- *   - ATMEGA8U2 (USB Device Only)

- *   - AT90USB162 (USB Device Only)

- *   - ATMEGA16U2 (USB Device Only)

- *   - ATMEGA16U4 (USB Device Only)

- *   - ATMEGA32U2 (USB Device Only)

- *   - ATMEGA32U4 (USB Device Only)

- *   - ATMEGA32U6 (USB Device Only)

- *   - AT90USB646 (USB Device Only)

- *   - AT90USB647 (USB Host and Device)

- *   - AT90USB1286 (USB Device Only)

- *   - AT90USB1287 (USB Host and Device)

- *

- *  Currently supported Atmel boards (see \ref Group_BoardTypes):

- *   - AT90USBKEY

- *   - ATAVRUSBRF01

- *   - EVK527

- *   - RZUSBSTICK

- *   - STK525

- *   - STK526

- *   - XPLAIN (Both original first revision board, and newer boards with a different Dataflash model)

- *

- *  Currently supported third-party boards (see \ref Group_BoardTypes):

- *   - Bumble-B (using officially recommended peripheral layout)

- *   - Benito

- *   - JM-DB-U2

- *   - Teensy (all revisions and versions)

- *   - USBTINY MKII (all revisions and versions)

- *   - Any Other Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers)

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/**
+ *  \page Page_DeviceSupport Device and Hardware Support
+ *
+ *  Currently supported AVR models:
+ *   - AT90USB82 (USB Device Only)
+ *   - ATMEGA8U2 (USB Device Only)
+ *   - AT90USB162 (USB Device Only)
+ *   - ATMEGA16U2 (USB Device Only)
+ *   - ATMEGA16U4 (USB Device Only)
+ *   - ATMEGA32U2 (USB Device Only)
+ *   - ATMEGA32U4 (USB Device Only)
+ *   - ATMEGA32U6 (USB Device Only)
+ *   - AT90USB646 (USB Device Only)
+ *   - AT90USB647 (USB Host and Device)
+ *   - AT90USB1286 (USB Device Only)
+ *   - AT90USB1287 (USB Host and Device)
+ *
+ *  Currently supported Atmel boards (see \ref Group_BoardTypes):
+ *   - AT90USBKEY
+ *   - ATAVRUSBRF01
+ *   - EVK527
+ *   - RZUSBSTICK
+ *   - STK525
+ *   - STK526
+ *   - XPLAIN (Both original first revision board, and newer boards with a different Dataflash model)
+ *
+ *  Currently supported third-party boards (see \ref Group_BoardTypes):
+ *   - Bumble-B (using officially recommended peripheral layout)
+ *   - Benito
+ *   - JM-DB-U2
+ *   - Teensy (all revisions and versions)
+ *   - USBTINY MKII (all revisions and versions)
+ *   - Any Other Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers)
+ */
  
\ No newline at end of file
diff --git a/LUFA/ManPages/DirectorySummaries.txt b/LUFA/ManPages/DirectorySummaries.txt
index 3d4995b49..25f2db064 100644
--- a/LUFA/ManPages/DirectorySummaries.txt
+++ b/LUFA/ManPages/DirectorySummaries.txt
@@ -1,171 +1,171 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \dir LUFA/Common

- *  \brief Common library header files.

- *  

- *  This folder contains header files which are common to all parts of the LUFA library. They may be used freely in

- *  user applications.

- *

- *  \dir LUFA/Drivers

- *  \brief Library hardware and software drivers.

- *  

- *  This folder contains all the library hardware and software drivers for each supported board and USB AVR

- *  microcontroller model.

- * 

- *  \dir LUFA/Drivers/Misc

- *  \brief Miscellaneous driver files.

- *  

- *  This folder contains drivers for aspects other than the USB interface, board hardware or AVR peripherals.

- * 

- *  \dir LUFA/Drivers/Peripheral

- *  \brief USB AVR peripheral driver files.

- *  

- *  This folder contains drivers for several of the AVR internal peripherals such as the USART, compatible with

- *  all USB AVR models.

- *

- *  \dir LUFA/Drivers/Peripheral/AVRU4U6U7

- *  \brief AT90USBXXX6, AT90USBXXX7 and ATMEGAXXU4 AVR model peripheral driver files.

- *  

- *  This folder contains drivers for several of the AVR internal peripherals such as the USART, compatible only with

- *  the AT90USBXXX6, AT90USBXXX7 and ATMEGAXXU4 USB AVR models, such as the AT90USB1287. Its contents should <b>not</b> be

- *  included by the user application - the dispatch header file located in the parent directory should be used

- *  instead.

- *

- *  \dir LUFA/Drivers/USB

- *  \brief USB controller peripheral driver files.

- *  

- *  This folder contains the main header files required to implement the USB interface in the USB supporting AVR models.

- *  The header files contained directly in this folder should be included in the user application in order to gain USB

- *  functionality, and the appropriate C source files in the LowLevel and HighLevel driver folders added to the compile

- *  and link stages.

- *

- *  \dir LUFA/Drivers/USB/LowLevel

- *  \brief Low level USB driver files.

- *  

- *  This folder contains low level USB driver source files required to implement USB functionality on the USB AVR microcontrollers.

- *

- *  \dir LUFA/Drivers/USB/HighLevel

- *  \brief High level USB driver files.

- *  

- *  This folder contains high level USB driver source files required to implement USB functionality on the USB AVR microcontrollers.

- *

- *  \dir LUFA/Drivers/USB/Class

- *  \brief USB Class helper driver files.

- *  

- *  This folder contains drivers for implementing functionality of standardized USB classes. These are not used directly by the library,

- *  but provide a standard and library-maintained way of implementing functionality from some of the defined USB classes without extensive

- *  development effort. Is is recommended that these drivers be used where possible to reduce maintenance of user applications.

- *

- *  \dir LUFA/Drivers/USB/Class/Device

- *  \brief USB Device Class helper driver files.

- *  

- *  Device mode drivers for the standard USB classes.

- *

- *  \dir LUFA/Drivers/USB/Class/Host

- *  \brief USB Host Class helper driver files.

- *  

- *  Host mode drivers for the standard USB classes.

- *

- *  \dir LUFA/Drivers/Board

- *  \brief Board hardware driver files.

- *  

- *  This folder contains drivers for interfacing with the physical hardware on supported commercial boards, primarily from

- *  the Atmel corporation. Header files in this folder should be included in user applications requiring the functionality of

- *  hardware placed on supported boards.

- *

- *  \dir LUFA/Drivers/Board/USBKEY

- *  \brief USBKEY board hardware driver files.

- *  

- *  This folder contains drivers for hardware on the Atmel USBKEY demonstration board. The header files in this folder should

- *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory

- *  should be included instead.

- *

- *  \dir LUFA/Drivers/Board/STK526

- *  \brief STK526 board hardware driver files.

- *  

- *  This folder contains drivers for hardware on the Atmel STK526 development board. The header files in this folder should

- *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory

- *  should be included instead.

- *

- *  \dir LUFA/Drivers/Board/STK525

- *  \brief STK525 board hardware driver files.

- *  

- *  This folder contains drivers for hardware on the Atmel STK525 development board. The header files in this folder should

- *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory

- *  should be included instead.

- *

- *  \dir LUFA/Drivers/Board/RZUSBSTICK

- *  \brief RZUSBSTICK board hardware driver files.

- *  

- *  This folder contains drivers for hardware on the Atmel RZUSBSTICK board, as used in the Atmel "Raven" wireless kits. The header

- *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located in

- *  the parent Board directory should be included instead.

- *

- *  \dir LUFA/Drivers/Board/ATAVRUSBRF01

- *  \brief ATAVRUSBRF01 board hardware driver files.

- *  

- *  This folder contains drivers for hardware on the Atmel ATAVRUSBRF01 board, as used in several Atmel wireless demo kits. The header

- *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located in

- *  the parent Board directory should be included instead.

- *

- *  \dir LUFA/Drivers/Board/BUMBLEB

- *  \brief BUMBLEB board hardware driver files.

- *  

- *  This folder contains drivers for hardware on the Fletchtronics Bumble-B board (http://fletchtronics.net/bumble-b). The header

- *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located in

- *  the parent Board directory should be included instead.

- *

- *  \dir LUFA/Drivers/Board/XPLAIN

- *  \brief XPLAIN board hardware driver files.

- *  

- *  This folder contains drivers for hardware on the Atmel XPLAIN board (all hardware revisions). The header files in this folder 

- *  should not be included directly in user applications; the similarly named dispatch header files located in the parent Board 

- *  directory should be included instead.

- *

- *  \dir LUFA/Drivers/Board/EVK527

- *  \brief XPLAIN board hardware driver files.

- *  

- *  This folder contains drivers for hardware on the Atmel EVK527 development board. The header files in this folder should

- *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory

- *  should be included instead.

- *

- *  \dir LUFA/Drivers/Board/TEENSY

- *  \brief TEENSY board hardware driver files.

- *  

- *  This folder contains drivers for hardware on all revisions of the PJRC Teensy boards (http://www.pjrc.com/teensy/). The header

- *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located

- *  in the parent Board directory should be included instead.

- *

- *  \dir LUFA/Drivers/Board/USBTINYMKII

- *  \brief USBTINY-MKII board hardware driver files.

- *  

- *  This folder contains drivers for hardware on all revisions of the USBTINY-MKII boards (http://tom-itx.dyndns.org:81/~webpage/).

- *  The header files in this folder should not be included directly in user applications; the similarly named dispatch header files

- *  located in the parent Board directory should be included instead.

- *

- *  \dir LUFA/Drivers/Board/BENITO

- *  \brief BENITO board hardware driver files.

- *  

- *  This folder contains drivers for hardware on the Benito boards (http://dorkbotpdx.org/wiki/benito). The header files in this

- *  folder should not be included directly in user applications; the similarly named dispatch header files located in the parent

- *  Board directory should be included instead.

- *

- *  \dir LUFA/Drivers/Board/JMDBU2

- *  \brief JM-DB-U2 board hardware driver files.

- *  

- *  This folder contains drivers for hardware on the JM-DB-U2 boards (http://u2.mattair.net/). The header files in this folder

- *  should not be included directly in user applications; the similarly named dispatch header files located in the parent Board

- *  directory should be included instead.

- *

- *  \dir LUFA/DriverStubs

- *  \brief Driver stub header files for custom boards, to allow the LUFA board drivers to operate.

- *  

- *  This contains stub files for the LUFA board drivers. If the LUFA board drivers are used with board hardware other than those

- *  directly supported by the library, the BOARD parameter of the application's makefile can be set to "USER", and these stub files

- *  copied to the "/Board/" directory of the application's folder. When fleshed out with working driver code for the custom board,

- *  the corresponding LUFA board APIs will work correctly with the non-standard board hardware.

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \dir LUFA/Common
+ *  \brief Common library header files.
+ *  
+ *  This folder contains header files which are common to all parts of the LUFA library. They may be used freely in
+ *  user applications.
+ *
+ *  \dir LUFA/Drivers
+ *  \brief Library hardware and software drivers.
+ *  
+ *  This folder contains all the library hardware and software drivers for each supported board and USB AVR
+ *  microcontroller model.
+ * 
+ *  \dir LUFA/Drivers/Misc
+ *  \brief Miscellaneous driver files.
+ *  
+ *  This folder contains drivers for aspects other than the USB interface, board hardware or AVR peripherals.
+ * 
+ *  \dir LUFA/Drivers/Peripheral
+ *  \brief USB AVR peripheral driver files.
+ *  
+ *  This folder contains drivers for several of the AVR internal peripherals such as the USART, compatible with
+ *  all USB AVR models.
+ *
+ *  \dir LUFA/Drivers/Peripheral/AVRU4U6U7
+ *  \brief AT90USBXXX6, AT90USBXXX7 and ATMEGAXXU4 AVR model peripheral driver files.
+ *  
+ *  This folder contains drivers for several of the AVR internal peripherals such as the USART, compatible only with
+ *  the AT90USBXXX6, AT90USBXXX7 and ATMEGAXXU4 USB AVR models, such as the AT90USB1287. Its contents should <b>not</b> be
+ *  included by the user application - the dispatch header file located in the parent directory should be used
+ *  instead.
+ *
+ *  \dir LUFA/Drivers/USB
+ *  \brief USB controller peripheral driver files.
+ *  
+ *  This folder contains the main header files required to implement the USB interface in the USB supporting AVR models.
+ *  The header files contained directly in this folder should be included in the user application in order to gain USB
+ *  functionality, and the appropriate C source files in the LowLevel and HighLevel driver folders added to the compile
+ *  and link stages.
+ *
+ *  \dir LUFA/Drivers/USB/LowLevel
+ *  \brief Low level USB driver files.
+ *  
+ *  This folder contains low level USB driver source files required to implement USB functionality on the USB AVR microcontrollers.
+ *
+ *  \dir LUFA/Drivers/USB/HighLevel
+ *  \brief High level USB driver files.
+ *  
+ *  This folder contains high level USB driver source files required to implement USB functionality on the USB AVR microcontrollers.
+ *
+ *  \dir LUFA/Drivers/USB/Class
+ *  \brief USB Class helper driver files.
+ *  
+ *  This folder contains drivers for implementing functionality of standardized USB classes. These are not used directly by the library,
+ *  but provide a standard and library-maintained way of implementing functionality from some of the defined USB classes without extensive
+ *  development effort. Is is recommended that these drivers be used where possible to reduce maintenance of user applications.
+ *
+ *  \dir LUFA/Drivers/USB/Class/Device
+ *  \brief USB Device Class helper driver files.
+ *  
+ *  Device mode drivers for the standard USB classes.
+ *
+ *  \dir LUFA/Drivers/USB/Class/Host
+ *  \brief USB Host Class helper driver files.
+ *  
+ *  Host mode drivers for the standard USB classes.
+ *
+ *  \dir LUFA/Drivers/Board
+ *  \brief Board hardware driver files.
+ *  
+ *  This folder contains drivers for interfacing with the physical hardware on supported commercial boards, primarily from
+ *  the Atmel corporation. Header files in this folder should be included in user applications requiring the functionality of
+ *  hardware placed on supported boards.
+ *
+ *  \dir LUFA/Drivers/Board/USBKEY
+ *  \brief USBKEY board hardware driver files.
+ *  
+ *  This folder contains drivers for hardware on the Atmel USBKEY demonstration board. The header files in this folder should
+ *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
+ *  should be included instead.
+ *
+ *  \dir LUFA/Drivers/Board/STK526
+ *  \brief STK526 board hardware driver files.
+ *  
+ *  This folder contains drivers for hardware on the Atmel STK526 development board. The header files in this folder should
+ *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
+ *  should be included instead.
+ *
+ *  \dir LUFA/Drivers/Board/STK525
+ *  \brief STK525 board hardware driver files.
+ *  
+ *  This folder contains drivers for hardware on the Atmel STK525 development board. The header files in this folder should
+ *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
+ *  should be included instead.
+ *
+ *  \dir LUFA/Drivers/Board/RZUSBSTICK
+ *  \brief RZUSBSTICK board hardware driver files.
+ *  
+ *  This folder contains drivers for hardware on the Atmel RZUSBSTICK board, as used in the Atmel "Raven" wireless kits. The header
+ *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located in
+ *  the parent Board directory should be included instead.
+ *
+ *  \dir LUFA/Drivers/Board/ATAVRUSBRF01
+ *  \brief ATAVRUSBRF01 board hardware driver files.
+ *  
+ *  This folder contains drivers for hardware on the Atmel ATAVRUSBRF01 board, as used in several Atmel wireless demo kits. The header
+ *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located in
+ *  the parent Board directory should be included instead.
+ *
+ *  \dir LUFA/Drivers/Board/BUMBLEB
+ *  \brief BUMBLEB board hardware driver files.
+ *  
+ *  This folder contains drivers for hardware on the Fletchtronics Bumble-B board (http://fletchtronics.net/bumble-b). The header
+ *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located in
+ *  the parent Board directory should be included instead.
+ *
+ *  \dir LUFA/Drivers/Board/XPLAIN
+ *  \brief XPLAIN board hardware driver files.
+ *  
+ *  This folder contains drivers for hardware on the Atmel XPLAIN board (all hardware revisions). The header files in this folder 
+ *  should not be included directly in user applications; the similarly named dispatch header files located in the parent Board 
+ *  directory should be included instead.
+ *
+ *  \dir LUFA/Drivers/Board/EVK527
+ *  \brief XPLAIN board hardware driver files.
+ *  
+ *  This folder contains drivers for hardware on the Atmel EVK527 development board. The header files in this folder should
+ *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
+ *  should be included instead.
+ *
+ *  \dir LUFA/Drivers/Board/TEENSY
+ *  \brief TEENSY board hardware driver files.
+ *  
+ *  This folder contains drivers for hardware on all revisions of the PJRC Teensy boards (http://www.pjrc.com/teensy/). The header
+ *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located
+ *  in the parent Board directory should be included instead.
+ *
+ *  \dir LUFA/Drivers/Board/USBTINYMKII
+ *  \brief USBTINY-MKII board hardware driver files.
+ *  
+ *  This folder contains drivers for hardware on all revisions of the USBTINY-MKII boards (http://tom-itx.dyndns.org:81/~webpage/).
+ *  The header files in this folder should not be included directly in user applications; the similarly named dispatch header files
+ *  located in the parent Board directory should be included instead.
+ *
+ *  \dir LUFA/Drivers/Board/BENITO
+ *  \brief BENITO board hardware driver files.
+ *  
+ *  This folder contains drivers for hardware on the Benito boards (http://dorkbotpdx.org/wiki/benito). The header files in this
+ *  folder should not be included directly in user applications; the similarly named dispatch header files located in the parent
+ *  Board directory should be included instead.
+ *
+ *  \dir LUFA/Drivers/Board/JMDBU2
+ *  \brief JM-DB-U2 board hardware driver files.
+ *  
+ *  This folder contains drivers for hardware on the JM-DB-U2 boards (http://u2.mattair.net/). The header files in this folder
+ *  should not be included directly in user applications; the similarly named dispatch header files located in the parent Board
+ *  directory should be included instead.
+ *
+ *  \dir LUFA/DriverStubs
+ *  \brief Driver stub header files for custom boards, to allow the LUFA board drivers to operate.
+ *  
+ *  This contains stub files for the LUFA board drivers. If the LUFA board drivers are used with board hardware other than those
+ *  directly supported by the library, the BOARD parameter of the application's makefile can be set to "USER", and these stub files
+ *  copied to the "/Board/" directory of the application's folder. When fleshed out with working driver code for the custom board,
+ *  the corresponding LUFA board APIs will work correctly with the non-standard board hardware.
+ */
diff --git a/LUFA/ManPages/Donating.txt b/LUFA/ManPages/Donating.txt
index ed778eaf2..a3f99ee2d 100644
--- a/LUFA/ManPages/Donating.txt
+++ b/LUFA/ManPages/Donating.txt
@@ -1,24 +1,24 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/**

- *  \page Page_Donating Donating to Support This Project

- *

- *  \image html Author.jpg "Dean Camera, LUFA Developer"

- *

- *  I am a 20 year old University student studying for a double degree in Computer Science and Electronics Engineering.

- *  The development and support of this library requires much effort from myself, as I am the sole developer, maintainer

- *  and supporter. Please consider donating a small amount to support this and my future Open Source projects - All

- *  donations are <i>greatly</i> appreciated.

- *

- *  Note that commercial entities can remove the attribution portion of the LUFA licence by a one-time fee - see

- *  \ref Page_LicenceInfo for more details (<b>Note: Please do NOT pay this in advance through the donation link below -

- *  contact author for payment details.</b>).

- *

- *  \image html "http://www.pledgie.com/campaigns/6927.png?skin_name=chrome"

- *  <a href='http://www.pledgie.com/campaigns/6927'>Donate to this project via PayPal</a> - Thanks in Advance!

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/**
+ *  \page Page_Donating Donating to Support This Project
+ *
+ *  \image html Author.jpg "Dean Camera, LUFA Developer"
+ *
+ *  I am a 20 year old University student studying for a double degree in Computer Science and Electronics Engineering.
+ *  The development and support of this library requires much effort from myself, as I am the sole developer, maintainer
+ *  and supporter. Please consider donating a small amount to support this and my future Open Source projects - All
+ *  donations are <i>greatly</i> appreciated.
+ *
+ *  Note that commercial entities can remove the attribution portion of the LUFA licence by a one-time fee - see
+ *  \ref Page_LicenceInfo for more details (<b>Note: Please do NOT pay this in advance through the donation link below -
+ *  contact author for payment details.</b>).
+ *
+ *  \image html "http://www.pledgie.com/campaigns/6927.png?skin_name=chrome"
+ *  <a href='http://www.pledgie.com/campaigns/6927'>Donate to this project via PayPal</a> - Thanks in Advance!
+ */
  
\ No newline at end of file
diff --git a/LUFA/ManPages/FutureChanges.txt b/LUFA/ManPages/FutureChanges.txt
index 04a5fc6c2..2a7b39e33 100644
--- a/LUFA/ManPages/FutureChanges.txt
+++ b/LUFA/ManPages/FutureChanges.txt
@@ -1,40 +1,40 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

- /** \page Page_FutureChanges Future Changes

-  *

-  *  Below is a list of future changes which are proposed for the LUFA library, but not yet started/complete.

-  *  This gives an unordered list of future changes which will be available in future releases of the library.

-  *  If you have an item to add to this list, please contact the library author via email, the LUFA mailing list,

-  *  or post your suggestion as an enhancement request to the project bug tracker.

-  *

-  *  <b>Targeted for Future Releases:</b>

-  *  - Code Features

-  *      -# Add hub support when in Host mode for multiple devices

-  *      -# Add ability to get number of bytes not written with pipe/endpoint write routines after an error

-  *      -# Add standardized descriptor names to class driver structures

-  *      -# Correct mishandling of error cases in Mass Storage demos

-  *  - Documentation/Support

-  *      -# Remake AVRStudio project files

-  *      -# Add detailed overviews of how each demo works

-  *      -# Master LUFA include file rather than per-module includes

-  *      -# Change makefiles to allow for absolute LUFA location to be used

-  *      -# Add board overviews

-  *      -# Write LUFA tutorials

-  *  - Demos/Projects

-  *      -# Multiple-Report HID device

-  *      -# Device/Host USB bridge

-  *      -# Alternative (USB-IF endorsed) USB-CDC Ethernet Class

-  *      -# USB Test and Measurement Class

-  *      -# Finish BluetoothHost demo

-  *      -# Finish SideShow demo

-  *      -# Finish StandaloneProgrammer project

-  *      -# Finish MIDIToneGenerator project

-  *  - Ports

-  *      -# AVR32 UC3B series microcontrollers

-  *      -# Atmel ARM7 series microcontrollers

-  *      -# Other (commercial) C compilers

-  */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+ /** \page Page_FutureChanges Future Changes
+  *
+  *  Below is a list of future changes which are proposed for the LUFA library, but not yet started/complete.
+  *  This gives an unordered list of future changes which will be available in future releases of the library.
+  *  If you have an item to add to this list, please contact the library author via email, the LUFA mailing list,
+  *  or post your suggestion as an enhancement request to the project bug tracker.
+  *
+  *  <b>Targeted for Future Releases:</b>
+  *  - Code Features
+  *      -# Add hub support when in Host mode for multiple devices
+  *      -# Add ability to get number of bytes not written with pipe/endpoint write routines after an error
+  *      -# Add standardized descriptor names to class driver structures
+  *      -# Correct mishandling of error cases in Mass Storage demos
+  *  - Documentation/Support
+  *      -# Remake AVRStudio project files
+  *      -# Add detailed overviews of how each demo works
+  *      -# Master LUFA include file rather than per-module includes
+  *      -# Change makefiles to allow for absolute LUFA location to be used
+  *      -# Add board overviews
+  *      -# Write LUFA tutorials
+  *  - Demos/Projects
+  *      -# Multiple-Report HID device
+  *      -# Device/Host USB bridge
+  *      -# Alternative (USB-IF endorsed) USB-CDC Ethernet Class
+  *      -# USB Test and Measurement Class
+  *      -# Finish BluetoothHost demo
+  *      -# Finish SideShow demo
+  *      -# Finish StandaloneProgrammer project
+  *      -# Finish MIDIToneGenerator project
+  *  - Ports
+  *      -# AVR32 UC3B series microcontrollers
+  *      -# Atmel ARM7 series microcontrollers
+  *      -# Other (commercial) C compilers
+  */
diff --git a/LUFA/ManPages/GettingStarted.txt b/LUFA/ManPages/GettingStarted.txt
index a1e5e1f4b..b33a3b5e7 100644
--- a/LUFA/ManPages/GettingStarted.txt
+++ b/LUFA/ManPages/GettingStarted.txt
@@ -1,26 +1,26 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \page Page_GettingStarted Getting Started

- *

- *  Out of the box, LUFA contains a large number of pre-made class demos for you to test, experiment with and

- *  ultimately build upon for your own projects. All the demos (where possible) come pre-configured to build and

- *  run correctly on the AT90USB1287 AVR microcontroller, mounted on the Atmel USBKEY board and running at an 8MHz

- *  master clock. This is due to two reasons; one, it is the hardware the author possesses, and two, it is the most

- *  popular Atmel USB demonstration board to date. To learn how to reconfigure, recompile and program the included

- *  LUFA applications using different settings, see the subsections below.

- *

- *  Most of the included demos in the /Demos/ folder come in both ClassDriver and LowLevel varieties. If you are new

- *  to LUFA, it is highly recommended that you look at the ClassDriver versions first, which use the premade USB

- *  Class Drivers (\ref Group_USBClassDrivers) to simplify the use of the standard USB classes in user applications.

- *

- *  For an overview of the included library applications, bootloaders and demos, see \ref Page_LibraryApps.

- *

- *  <b>Subsections:</b>

- *  - \subpage Page_ConfiguringApps How to Configure the Included Demos, Projects and Bootloaders

- *  - \subpage Page_CompilingApps How to Compile the Included Demos, Projects and Bootloaders

- *  - \subpage Page_ProgrammingApps How to Program an AVR with the Included Demos, Projects and Bootloaders

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \page Page_GettingStarted Getting Started
+ *
+ *  Out of the box, LUFA contains a large number of pre-made class demos for you to test, experiment with and
+ *  ultimately build upon for your own projects. All the demos (where possible) come pre-configured to build and
+ *  run correctly on the AT90USB1287 AVR microcontroller, mounted on the Atmel USBKEY board and running at an 8MHz
+ *  master clock. This is due to two reasons; one, it is the hardware the author possesses, and two, it is the most
+ *  popular Atmel USB demonstration board to date. To learn how to reconfigure, recompile and program the included
+ *  LUFA applications using different settings, see the subsections below.
+ *
+ *  Most of the included demos in the /Demos/ folder come in both ClassDriver and LowLevel varieties. If you are new
+ *  to LUFA, it is highly recommended that you look at the ClassDriver versions first, which use the premade USB
+ *  Class Drivers (\ref Group_USBClassDrivers) to simplify the use of the standard USB classes in user applications.
+ *
+ *  For an overview of the included library applications, bootloaders and demos, see \ref Page_LibraryApps.
+ *
+ *  <b>Subsections:</b>
+ *  - \subpage Page_ConfiguringApps How to Configure the Included Demos, Projects and Bootloaders
+ *  - \subpage Page_CompilingApps How to Compile the Included Demos, Projects and Bootloaders
+ *  - \subpage Page_ProgrammingApps How to Program an AVR with the Included Demos, Projects and Bootloaders
+ */
diff --git a/LUFA/ManPages/Groups.txt b/LUFA/ManPages/Groups.txt
index 530ce28b4..a204412e1 100644
--- a/LUFA/ManPages/Groups.txt
+++ b/LUFA/ManPages/Groups.txt
@@ -1,20 +1,20 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** @defgroup Group_BoardDrivers Board Drivers

- *

- *  Functions, macros, variables, enums and types related to the control of physical board hardware.

- */

-

-/** @defgroup Group_PeripheralDrivers On-chip Peripheral Drivers

- *

- *  Functions, macros, variables, enums and types related to the control of AVR subsystems.

- */

- 

-/** @defgroup Group_MiscDrivers Miscellaneous Drivers

- *

- *  Miscellaneous driver Functions, macros, variables, enums and types.

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** @defgroup Group_BoardDrivers Board Drivers
+ *
+ *  Functions, macros, variables, enums and types related to the control of physical board hardware.
+ */
+
+/** @defgroup Group_PeripheralDrivers On-chip Peripheral Drivers
+ *
+ *  Functions, macros, variables, enums and types related to the control of AVR subsystems.
+ */
+ 
+/** @defgroup Group_MiscDrivers Miscellaneous Drivers
+ *
+ *  Miscellaneous driver Functions, macros, variables, enums and types.
+ */
diff --git a/LUFA/ManPages/LUFAPoweredProjects.txt b/LUFA/ManPages/LUFAPoweredProjects.txt
index 41a41ae90..4fb8c3425 100644
--- a/LUFA/ManPages/LUFAPoweredProjects.txt
+++ b/LUFA/ManPages/LUFAPoweredProjects.txt
@@ -1,83 +1,83 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \page Page_LUFAPoweredProjects User Projects Powered by LUFA

- *

- *  LUFA is currently in use all around the world, in many applications both commercial and non-commercial. Below is a

- *  list of known public LUFA powered projects, which all use the LUFA library in some way. Feel free to visit each project's

- *  home page for more information on each project.

- *

- *  If you have a project that you would like to add to this list, please contact me via the details on the main page of this

- *  documentation.

- *

- *  \section Sec_BoardsUsingLUFA AVR-USB Development Boards Using LUFA

- *

- *  The following is a list of known AVR USB development boards, which recommend using LUFA for the USB stack. Some of these

- *  are open design, and all are available for purchase as completed development boards suitable for project development.

- *

- *  - AT90USB162 Breadboard PCB (Russian): http://microsin.ru/content/view/685/44/

- *  - Benito #7, a no-frills USB board: http://www.dorkbotpdx.org/wiki/benito

- *  - Bumble-B, yet another AT90USB162 development board: http://fletchtronics.net/bumble-b

- *  - JM-DB-U2, an ATMEGA32U2 development board: http://u2.mattair.net/index.html

- *  - Micropendous, an open design/source set of AVR USB development boards: http://micropendous.org/

- *  - Nanduino, a do-it-yourself AT90USB162 board: http://www.makestuff.eu/wordpress/?page_id=569

- *  - Teensy and Teensy++, two other AVR USB development boards: http://www.pjrc.com/teensy/index.html

- *  - U2DIL/U4DIL, a set of DIP layout USB AVR boards: http://www.reworld.eu/re/en/products/u2dil/

- *  - USB10 AKA "The Ferret", a AT90USB162 development board: http://www.soc-machines.com

- * 

- *  \section Sec_LUFAProjects Projects Using LUFA (Hobbyist)

- *

- *  The following are known hobbyist projects using LUFA. Most are open source, and show off interesting ways that the LUFA library

- *  can be incorporated into many different applications.

- *

- *  - Accelerometer Game Joystick: http://www.crictor.co.il/he/episodes/joystick/

- *  - Arcade Controller: http://fletchtronics.net/arcade-controller-made-petunia

- *  - AVR USB Modem, a 3G Wireless Modem host: http://code.google.com/p/avrusbmodem/

- *  - Bicycle POV: http://www.code.google.com/p/bicycleledpov/

- *  - CAMTRIG, a remote Camera Trigger device: http://code.astraw.com/projects/motmot/camtrig

- *  - CD Driver Emulator Dongle for ISO Files: http://cdemu.blogspot.com/

- *  - ClockTamer, a configurable clock generator: http://code.google.com/p/clock-tamer/

- *  - EMUCOMBOX, a USB-RS422 adapter for E-Mu Emax samplers: http://users.skynet.be/emxp/EMUCOMBOX.htm

- *  - "Fingerlicking Wingdinger" (WARNING: Bad Language if no Javascript), a MIDI controller: http://noisybox.net/electronics/wingdinger/

- *  - Garmin GPS USB to NMEA standard serial sentence translator: http://github.com/nall/garmin-transmogrifier/tree/master

- *  - Generic HID Device Creator: http://generichid.sourceforge.net/

- *  - IR Remote to Keyboard decoder: http://netzhansa.blogspot.com/2010/04/our-living-room-hi-fi-setup-needs-mp3.html

- *  - LED Panel controller: http://projects.peterpolidoro.net/caltech/panelscontroller/panelscontroller.htm

- *  - Linux Secure Storage Dongle: http://github.com/TomMD/teensy

- *  - MakeTV Episode Dispenser: http://www.youtube.com/watch?v=BkWUi18hl3g

- *  - MidiMonster, a USB-to-MIDI gateway board: http://www.dorkbotpdx.org/wiki/midimonster

- *  - NES Controller USB modification: http://projects.peterpolidoro.net/video/NESUSB.htm

- *  - Opendous-JTAG, an open source JTAG device: http://code.google.com/p/opendous-jtag/

- *  - Openkubus, an open source hardware-based authentication dongle: http://code.google.com/p/openkubus/

- *  - Orbee, a USB connected RGB Orb for notifications: http://www.franksworkshop.com.au/Electronics/Orbee/Orbee.htm

- *  - Programmable XBOX controller: http://richard-burke.dyndns.org/wordpress/pan-galactic-gargantuan-gargle-brain-aka-xbox-360-usb-controller/

- *  - Reprap with LUFA, a LUFA powered 3D printer: http://code.google.com/p/at90usb1287-code-for-arduino-and-eclipse/

- *  - SD Card reader: http://elasticsheep.com/2010/04/teensy2-usb-mass-storage-with-an-sd-card/

- *  - SEGA Megadrive/Genesis Development Cartridge: http://www.makestuff.eu/wordpress/?page_id=398

- *  - Stripe Snoop, a Magnetic Card reader: http://www.ossguy.com/ss_usb/

- *  - USB Interface for Playstation Portable Devices: http://forums.ps2dev.org/viewtopic.php?t=11001

- *  - Userial, a USB to Serial converter with SPI, I2C and other protocols: http://www.tty1.net/userial/

- *  - XUM1541, a Commodore 64 floppy drive to USB adapter: http://www.root.org/~nate/c64/xum1541/

- * 

- *  \section Sec_LUFACommercialProjects Projects Using LUFA (Commercial)

- *

- *  The following is a list of known commercial products using LUFA. Some of these are open source, although many are "black-box"

- *  solutions with no source code given.

- *

- *  - ARPS Locator: http://la3t.hamradio.no/lab//?id=tracker_en

- *  - Digital Survey Instruments Magnetometer and Pointer: http://www.digitalsurveyinstruments.com/

- *  - Penguino, an Arduino Board With On-Board LUFA Powered Debugger/Programmer: http://wiki.icy.com.au/PenguinoAVR

- *  - Many of Busware's Products: http://www.busware.de/

- *  - MIDIFighter, a USB-MIDI controller: http://www.midifighter.com/

- *  - Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3

- *  - Retrode, a USB Games Console Cartridge Reader: http://www.retrode.org

- *  - XMEGA Development Board, using LUFA as an On-Board Programmer: http://xmega.mattair.net/

- *

- *  \section Sec_LUFAPublications Publications Mentioning LUFA

- *  - Elektor Magazine, "My First AVR-USB" by Antoine Authier (feature), January 2010 Issue

- *  - Elektor Magazine, "USB is Cool/Sucks" by Jerry Jacobs and Chris Vossen (minor mention), January 2010 Issue

- *  - Elektor Magazine, "20 x Open Source" by Jens Nickel, March 2010 Issue

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \page Page_LUFAPoweredProjects User Projects Powered by LUFA
+ *
+ *  LUFA is currently in use all around the world, in many applications both commercial and non-commercial. Below is a
+ *  list of known public LUFA powered projects, which all use the LUFA library in some way. Feel free to visit each project's
+ *  home page for more information on each project.
+ *
+ *  If you have a project that you would like to add to this list, please contact me via the details on the main page of this
+ *  documentation.
+ *
+ *  \section Sec_BoardsUsingLUFA AVR-USB Development Boards Using LUFA
+ *
+ *  The following is a list of known AVR USB development boards, which recommend using LUFA for the USB stack. Some of these
+ *  are open design, and all are available for purchase as completed development boards suitable for project development.
+ *
+ *  - AT90USB162 Breadboard PCB (Russian): http://microsin.ru/content/view/685/44/
+ *  - Benito #7, a no-frills USB board: http://www.dorkbotpdx.org/wiki/benito
+ *  - Bumble-B, yet another AT90USB162 development board: http://fletchtronics.net/bumble-b
+ *  - JM-DB-U2, an ATMEGA32U2 development board: http://u2.mattair.net/index.html
+ *  - Micropendous, an open design/source set of AVR USB development boards: http://micropendous.org/
+ *  - Nanduino, a do-it-yourself AT90USB162 board: http://www.makestuff.eu/wordpress/?page_id=569
+ *  - Teensy and Teensy++, two other AVR USB development boards: http://www.pjrc.com/teensy/index.html
+ *  - U2DIL/U4DIL, a set of DIP layout USB AVR boards: http://www.reworld.eu/re/en/products/u2dil/
+ *  - USB10 AKA "The Ferret", a AT90USB162 development board: http://www.soc-machines.com
+ * 
+ *  \section Sec_LUFAProjects Projects Using LUFA (Hobbyist)
+ *
+ *  The following are known hobbyist projects using LUFA. Most are open source, and show off interesting ways that the LUFA library
+ *  can be incorporated into many different applications.
+ *
+ *  - Accelerometer Game Joystick: http://www.crictor.co.il/he/episodes/joystick/
+ *  - Arcade Controller: http://fletchtronics.net/arcade-controller-made-petunia
+ *  - AVR USB Modem, a 3G Wireless Modem host: http://code.google.com/p/avrusbmodem/
+ *  - Bicycle POV: http://www.code.google.com/p/bicycleledpov/
+ *  - CAMTRIG, a remote Camera Trigger device: http://code.astraw.com/projects/motmot/camtrig
+ *  - CD Driver Emulator Dongle for ISO Files: http://cdemu.blogspot.com/
+ *  - ClockTamer, a configurable clock generator: http://code.google.com/p/clock-tamer/
+ *  - EMUCOMBOX, a USB-RS422 adapter for E-Mu Emax samplers: http://users.skynet.be/emxp/EMUCOMBOX.htm
+ *  - "Fingerlicking Wingdinger" (WARNING: Bad Language if no Javascript), a MIDI controller: http://noisybox.net/electronics/wingdinger/
+ *  - Garmin GPS USB to NMEA standard serial sentence translator: http://github.com/nall/garmin-transmogrifier/tree/master
+ *  - Generic HID Device Creator: http://generichid.sourceforge.net/
+ *  - IR Remote to Keyboard decoder: http://netzhansa.blogspot.com/2010/04/our-living-room-hi-fi-setup-needs-mp3.html
+ *  - LED Panel controller: http://projects.peterpolidoro.net/caltech/panelscontroller/panelscontroller.htm
+ *  - Linux Secure Storage Dongle: http://github.com/TomMD/teensy
+ *  - MakeTV Episode Dispenser: http://www.youtube.com/watch?v=BkWUi18hl3g
+ *  - MidiMonster, a USB-to-MIDI gateway board: http://www.dorkbotpdx.org/wiki/midimonster
+ *  - NES Controller USB modification: http://projects.peterpolidoro.net/video/NESUSB.htm
+ *  - Opendous-JTAG, an open source JTAG device: http://code.google.com/p/opendous-jtag/
+ *  - Openkubus, an open source hardware-based authentication dongle: http://code.google.com/p/openkubus/
+ *  - Orbee, a USB connected RGB Orb for notifications: http://www.franksworkshop.com.au/Electronics/Orbee/Orbee.htm
+ *  - Programmable XBOX controller: http://richard-burke.dyndns.org/wordpress/pan-galactic-gargantuan-gargle-brain-aka-xbox-360-usb-controller/
+ *  - Reprap with LUFA, a LUFA powered 3D printer: http://code.google.com/p/at90usb1287-code-for-arduino-and-eclipse/
+ *  - SD Card reader: http://elasticsheep.com/2010/04/teensy2-usb-mass-storage-with-an-sd-card/
+ *  - SEGA Megadrive/Genesis Development Cartridge: http://www.makestuff.eu/wordpress/?page_id=398
+ *  - Stripe Snoop, a Magnetic Card reader: http://www.ossguy.com/ss_usb/
+ *  - USB Interface for Playstation Portable Devices: http://forums.ps2dev.org/viewtopic.php?t=11001
+ *  - Userial, a USB to Serial converter with SPI, I2C and other protocols: http://www.tty1.net/userial/
+ *  - XUM1541, a Commodore 64 floppy drive to USB adapter: http://www.root.org/~nate/c64/xum1541/
+ * 
+ *  \section Sec_LUFACommercialProjects Projects Using LUFA (Commercial)
+ *
+ *  The following is a list of known commercial products using LUFA. Some of these are open source, although many are "black-box"
+ *  solutions with no source code given.
+ *
+ *  - ARPS Locator: http://la3t.hamradio.no/lab//?id=tracker_en
+ *  - Digital Survey Instruments Magnetometer and Pointer: http://www.digitalsurveyinstruments.com/
+ *  - Penguino, an Arduino Board With On-Board LUFA Powered Debugger/Programmer: http://wiki.icy.com.au/PenguinoAVR
+ *  - Many of Busware's Products: http://www.busware.de/
+ *  - MIDIFighter, a USB-MIDI controller: http://www.midifighter.com/
+ *  - Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3
+ *  - Retrode, a USB Games Console Cartridge Reader: http://www.retrode.org
+ *  - XMEGA Development Board, using LUFA as an On-Board Programmer: http://xmega.mattair.net/
+ *
+ *  \section Sec_LUFAPublications Publications Mentioning LUFA
+ *  - Elektor Magazine, "My First AVR-USB" by Antoine Authier (feature), January 2010 Issue
+ *  - Elektor Magazine, "USB is Cool/Sucks" by Jerry Jacobs and Chris Vossen (minor mention), January 2010 Issue
+ *  - Elektor Magazine, "20 x Open Source" by Jens Nickel, March 2010 Issue
  */
\ No newline at end of file
diff --git a/LUFA/ManPages/LUFAvsAtmelStack.txt b/LUFA/ManPages/LUFAvsAtmelStack.txt
index 8f39b7239..582bb9e0f 100644
--- a/LUFA/ManPages/LUFAvsAtmelStack.txt
+++ b/LUFA/ManPages/LUFAvsAtmelStack.txt
@@ -1,46 +1,46 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/**

- *  \page Page_LUFAvsAtmelStack LUFA vs the Atmel Stack

- *

- *  Atmel offers an official USB AVR stack, which may be incorporated into user projects and products. As LUFA and the Atmel

- *  stack aims to give roughly the same functionality to a design, it is often asked what advantages LUFA carries over the

- *  official Atmel USB stack. Below are just some of the advantages to choosing LUFA over the official stack.

- *

- *  - <b>Licensing:</b>

- *    LUFA is released under a very permissive MIT license (see \ref Page_LicenceInfo), while the Atmel stack carries several

- *    restrictions as to how and where it can be used. LUFA's licensing should be suitable for both Commercial and Non-Commercial

- *    entities alike.

- *

- *  - <b>Demos and Projects:</b>

- *    Unlike the Atmel stack, LUFA comes with many different Device and Host mode Demos and Projects ready to run out of the box.

- *    Atmel favours separate downloads for each of their (small set) of USB AVR demos, which requires more time and offers less

- *    to the end-user. LUFA also contains several open source Bootloaders, which can be modified as the user wishes to suit his or

- *    her application, instead of being forced to use Atmel's single prebuilt (closed-source) DFU bootloader.

- *

- *  - <b>Central Library Code:</b>

- *    LUFA is designed to allow the central library core code to be shared amongst several projects, so long as the compiled object

- *    files are cleaned between different projects. This is in direct contrast to the Atmel library, which is strongly coupled to the

- *    project it is integrated with. Using LUFA allows for only one copy of the library core to be needed for all applications, and

- *    makes updating the library used in all projects a trivial copy-and-paste process.

- *

- *  - <b>Clean API:</b>

- *    One of the main design goals of LUFA is to make the API easy to use. While LUFA is a fluid project which has undergone many

- *    API improvements, the API is arguably much nicer to use and easier to understand than the equivelent Atmel stack code. LUFA's

- *    API is also more complete than the Atmel stack, and contains many features to speed up application development.

- *

- *  - <b>Full Hardware Support:</b>

- *    LUFA supports the full range of Atmel's USB AVR microcontrollers (see \ref Page_DeviceSupport), with porting between chips being

- *    as simple as a single compile switch in many cases. Atmel's stack requires different libraries to be used based on the USB AVR

- *    microcontroller series, complicating the process of moving between USB AVR models. In addition, LUFA contains drivers for all the

- *    hardware contained on Atmel's USB AVR based boards, so you can get started quickly and easily.

- *

- *  - <b>Better Library Support:</b>

- *    As many people are now using LUFA, there is a community being built around it. You can get answers to your LUFA related questions

- *    quickly by either emailing the library author (subject to author's schedule) or by posting to the official LUFA support mailing list.

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/**
+ *  \page Page_LUFAvsAtmelStack LUFA vs the Atmel Stack
+ *
+ *  Atmel offers an official USB AVR stack, which may be incorporated into user projects and products. As LUFA and the Atmel
+ *  stack aims to give roughly the same functionality to a design, it is often asked what advantages LUFA carries over the
+ *  official Atmel USB stack. Below are just some of the advantages to choosing LUFA over the official stack.
+ *
+ *  - <b>Licensing:</b>
+ *    LUFA is released under a very permissive MIT license (see \ref Page_LicenceInfo), while the Atmel stack carries several
+ *    restrictions as to how and where it can be used. LUFA's licensing should be suitable for both Commercial and Non-Commercial
+ *    entities alike.
+ *
+ *  - <b>Demos and Projects:</b>
+ *    Unlike the Atmel stack, LUFA comes with many different Device and Host mode Demos and Projects ready to run out of the box.
+ *    Atmel favours separate downloads for each of their (small set) of USB AVR demos, which requires more time and offers less
+ *    to the end-user. LUFA also contains several open source Bootloaders, which can be modified as the user wishes to suit his or
+ *    her application, instead of being forced to use Atmel's single prebuilt (closed-source) DFU bootloader.
+ *
+ *  - <b>Central Library Code:</b>
+ *    LUFA is designed to allow the central library core code to be shared amongst several projects, so long as the compiled object
+ *    files are cleaned between different projects. This is in direct contrast to the Atmel library, which is strongly coupled to the
+ *    project it is integrated with. Using LUFA allows for only one copy of the library core to be needed for all applications, and
+ *    makes updating the library used in all projects a trivial copy-and-paste process.
+ *
+ *  - <b>Clean API:</b>
+ *    One of the main design goals of LUFA is to make the API easy to use. While LUFA is a fluid project which has undergone many
+ *    API improvements, the API is arguably much nicer to use and easier to understand than the equivelent Atmel stack code. LUFA's
+ *    API is also more complete than the Atmel stack, and contains many features to speed up application development.
+ *
+ *  - <b>Full Hardware Support:</b>
+ *    LUFA supports the full range of Atmel's USB AVR microcontrollers (see \ref Page_DeviceSupport), with porting between chips being
+ *    as simple as a single compile switch in many cases. Atmel's stack requires different libraries to be used based on the USB AVR
+ *    microcontroller series, complicating the process of moving between USB AVR models. In addition, LUFA contains drivers for all the
+ *    hardware contained on Atmel's USB AVR based boards, so you can get started quickly and easily.
+ *
+ *  - <b>Better Library Support:</b>
+ *    As many people are now using LUFA, there is a community being built around it. You can get answers to your LUFA related questions
+ *    quickly by either emailing the library author (subject to author's schedule) or by posting to the official LUFA support mailing list.
+ */
  
\ No newline at end of file
diff --git a/LUFA/ManPages/LibraryApps.txt b/LUFA/ManPages/LibraryApps.txt
index 2217740e2..2f0728127 100644
--- a/LUFA/ManPages/LibraryApps.txt
+++ b/LUFA/ManPages/LibraryApps.txt
@@ -1,116 +1,116 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \page Page_LibraryApps Included Library Applications

- *

- *  The LUFA library ships with several different host and device demos, located in the /Demos/ subdirectory. Within this

- *  directory the demos are seperated by USB mode (Device, Host, OTG) and further seperated by the use or non-use of the

- *  library USB Class drivers (which abstract out the actual implementation of the USB classes to simplify development even

- *  further at the expense of a loss of flexibility).

- *

- *  With one or two exceptions (e.g. proprietary classes such as RNDIS) all the included demos will work across all OSes without

- *  the need for special drivers. On Windows, some demos require the supplied .INF file to be used as the device driver, which

- *  directs the OS to use its inbuilt class drivers for the device.

- *

- *  Also included with the library are three fully functional bootloaders, located in the /Bootloaders/ subdirectory.

- *  The DFU class bootloader is compatible with Atmel's FLIP software or the open source dfu-programmer project, the

- *  CDC class (AVR109 protocol) is compatible with such open source software as AVRDUDE and AVR-OSP, and the TeensyLoader

- *  HID class bootloader is compatible with the software from PJRC (<a>http://www.pjrc.com/teensy/index.html</a>).

- *

- *  User-submitted projects are located in the /Projects/ subdirectory. If you wish to have your LUFA project included,

- *  please email it to the Library author.

- *

- *  \section Sec_AppOverview Overview of Included Library Applications

- *  The following shows the folder structure of the included library applications, including demos, bootloaders and user-submitted

- *  open source projects.

- *

- *  <small>

- *

- *  - <b>Demos</b>

- *    - <b>Device</b>

- *      - <b>ClassDriver</b>

- *        - <b>AudioInput</b> - Audio In (microphone) demo, using the library USB Audio Class driver framework

- *        - <b>AudioOutput</b> - Audio Out (speaker) demo, using the library USB Audio Class driver framework

- *        - <b>DualVirtualSerial</b> - Dual Virtual Serial Port demo, using the library USB CDC Class driver framework

- *        - <b>GenericHID</b> - Generic Human Interface Class demo, using the library USB HID Class driver framework

- *        - <b>Joystick</b> - USB Joystick demo, using the library USB HID Class driver framework

- *        - <b>Keyboard</b> - USB Keyboard demo, using the library USB HID Class driver framework

- *        - <b>KeyboardMouse</b> - Dual Keyboard/Mouse demo, using the library USB HID Class driver framework

- *        - <b>MassStorage</b> - Dual Drive Mass Storage demo, using the library USB Mass Storage Class driver framework

- *        - <b>MassStorageKeyboard</b> - Mass Storage and Keyboard demo, using the library USB Mass Storage/HID Class driver frameworks

- *        - <b>MIDI</b> - MIDI In demo, using the library USB MIDI-Audio Class driver framework

- *        - <b>Mouse</b> - USB Mouse demo, using the library USB HID driver framework

- *        - <b>RNDISEthernet</b> - RNDIS Ethernet Webserver demo, using the library USB RNDIS driver framework

- *        - <b>VirtualSerial</b> - Virtual Serial Port demo, using the library USB CDC Class driver framework

- *        - <b>VirtualSerialMouse</b> - Virtual Serial Port and Mouse demo, using the library USB CDC and HID Class driver frameworks

- *      - <b>LowLevel</b>

- *        - <b>AudioInput</b> - Audio In (microphone) demo, using the low level LUFA APIs to implement the USB Audio class

- *        - <b>AudioOutput</b> - Audio Out (speaker) demo, using the low level LUFA APIs to implement the USB Audio class

- *        - <b>DualVirtualSerial</b> - Dual Virtual Serial Port demo, using the low level LUFA APIs to implement the USB CDC class

- *        - <b>GenericHID</b> - Generic Human Interface Class demo, using the low level LUFA APIs to implement the USB HID class

- *        - <b>Joystick</b> - USB Joystick demo, using the low level LUFA APIs to implement the USB HID class

- *        - <b>Keyboard</b> - USB Keyboard demo, using the low level LUFA APIs to implement the USB HID class

- *        - <b>KeyboardMouse</b> - Dual Keyboard/Mouse demo, using the low level LUFA APIs to implement the USB HID class

- *        - <b>MassStorage</b> - Dual Drive Mass Storage demo, using the low level LUFA APIs to implement the USB Mass Storage class

- *        - <b>MIDI</b> - MIDI In demo, using the low level LUFA APIs to implement the USB MIDI-Audio class

- *        - <b>Mouse</b> - USB Mouse demo, using the low level LUFA APIs to implement the USB HID class

- *        - <b>RNDISEthernet</b> - RNDIS Ethernet Webserver demo, using the low level LUFA APIs to implement the USB RNDIS class

- *        - <b>VirtualSerial</b> - Virtual Serial Port demo, using the low level LUFA APIs to implement the USB CDC class

- *      - <b>Incomplete</b>

- *        - <b>SideShow</b> - Incomplete Windows SideShow demo, using the low level LUFA APIs to implement the USB SideShow class

- *    - <b>Host</b>

- *      - <b>ClassDriver</b>

- *        - <b>JoystickHostWithParser</b> - Joystick host demo with HID Descriptor parser, using the library USB HID Class driver framework

- *        - <b>KeyboardHost</b> - USB Keyboard host demo, using the library USB HID Class driver framework

- *        - <b>KeyboardHostWithParser</b> - USB Keyboard host demo with HID Descriptor parser, using the library USB HID Class

- *                                          driver framework

- *        - <b>MassStorageHost</b> - Mass Storage host demo, using the library USB Mass Storage Class driver framework

- *        - <b>MouseHost</b> - Mouse host demo, using the library USB HID Class driver framework

- *        - <b>MouseHostWithParser</b> - Mouse host demo with HID Descriptor parser, using the library USB HID Class driver framework

- *        - <b>RNDISHost</b> - RNDIS Ethernet host demo, using the library USB RNDIS Class driver framework

- *        - <b>StillImageHost</b> - Still Image Camera host demo, using the library USB Still Image Class driver framework

- *        - <b>VirtualSerialHost</b> - Virtual Serial Port host demo, using the library USB CDC Class driver framework

- *      - <b>LowLevel</b>

- *        - <b>JoystickHostWithParser</b> - Joystick host demo with HID Descriptor parser, using the low level LUFA APIs to implement 

- *                                          the USB HID class

- *        - <b>GenericHIDHost</b> - Generic HID host demo, using the low level LUFA APIs to implement the USB HID class

- *        - <b>KeyboardHost</b> - USB Keyboard host demo, using the low level LUFA APIs to implement the USB HID class

- *        - <b>KeyboardHostWithParser</b> - USB Keyboard host demo with HID Descriptor parser, using the low level LUFA APIs to

- *                                          implement the USB HID class

- *        - <b>MassStorageHost</b> - Mass Storage host demo, using the low level LUFA APIs to implement the USB Mass Storage class

- *        - <b>MouseHost</b> - Mouse host demo, using the low level LUFA APIs to implement the USB HID class

- *        - <b>MouseHostWithParser</b> - Mouse host demo with HID Descriptor parser, using the low level LUFA APIs to implement the

- *                                       USB HID class

- *        - <b>PrinterHost</b> - Printer host demo, using the low level LUFA APIs to implement the USB Printer class

- *        - <b>RNDISHost</b> - RNDIS Ethernet host demo, using the low level LUFA APIs to implement the RNDIS class

- *        - <b>StillImageHost</b> - Still Image Camera host demo, using the low level LUFA APIs to implement the USB Still Image class

- *        - <b>VirtualSerialHost</b> - Virtual Serial Port host demo, using the low level LUFA APIs to implement the USB CDC class

- *      - <b>Incomplete</b>

- *        - <b>BluetoothHost</b> - Incomplete Bluetooth host demo, using the low level LUFA APIs to implement the USB Bluetooth class

- *    - <b>DualRole</b>

- *      - <b>ClassDriver</b>

- *        - <b>MouseHostDevice</b> - Dual role Mouse Host and Mouse Device demo, using the library USB CDC Class driver framework

- *  - <b>Bootloaders</b>

- *    - <b>DFU</b> - DFU Class USB bootloader, compatible with Atmel's FLIP and the open source dfu-programmer software

- *    - <b>CDC</b> - CDC Class USB bootloader, compatible with any AVR910 protocol programming software such as AVRDude

- *    - <b>TeensyHID</b> - HID Class bootloader, compatible with the PJRC TeensyLoader software

- *  - <b>Projects</b>

- *    - <b>AVRISP-MKII</b> - AVRISP-MKII Programmer Clone project

- *    - <b>Benito</b> - Benito Board Arduino Programmer project

- *    - <b>LEDNotifier</b> - USB LED Notification project

- *    - <b>Magstripe</b> - Magnetic Stripe Card Reader project

- *    - <b>MissileLaucher</b> - Toy Missile Launcher Host project

- *    - <b>RelayBoard</b> - Relay board controller, controllable via the "sismpctl" Linux application

- *    - <b>TemperatureDataLogger</b> - Temperature Datalogging project, using the FatFS library

- *    - <b>USBtoSerial</b> - USB to USART Serial Converter project

- *    - <b>Webserver</b> - RNDIS Host Webserver with DHCP client, powered by uIP TCP/IP stack project and FatFS library

- *    - <b>XPLAINBridge</b> - XPLAIN alternative PDI Programmer/USB to Serial Bridge firmware project

- *    - <b>Incomplete</b>

- *      - <b>MIDIToneGenerator</b> - Incomplete MIDI Tone Generator application, to convert MIDI note messages into audio tones

- *      - <b>StandaloneProgrammer</b> - Incomplete Standalone AVR Programmer application, to program AVRs directly from a Mass Storage disk

- *

- *  </small>

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \page Page_LibraryApps Included Library Applications
+ *
+ *  The LUFA library ships with several different host and device demos, located in the /Demos/ subdirectory. Within this
+ *  directory the demos are seperated by USB mode (Device, Host, OTG) and further seperated by the use or non-use of the
+ *  library USB Class drivers (which abstract out the actual implementation of the USB classes to simplify development even
+ *  further at the expense of a loss of flexibility).
+ *
+ *  With one or two exceptions (e.g. proprietary classes such as RNDIS) all the included demos will work across all OSes without
+ *  the need for special drivers. On Windows, some demos require the supplied .INF file to be used as the device driver, which
+ *  directs the OS to use its inbuilt class drivers for the device.
+ *
+ *  Also included with the library are three fully functional bootloaders, located in the /Bootloaders/ subdirectory.
+ *  The DFU class bootloader is compatible with Atmel's FLIP software or the open source dfu-programmer project, the
+ *  CDC class (AVR109 protocol) is compatible with such open source software as AVRDUDE and AVR-OSP, and the TeensyLoader
+ *  HID class bootloader is compatible with the software from PJRC (<a>http://www.pjrc.com/teensy/index.html</a>).
+ *
+ *  User-submitted projects are located in the /Projects/ subdirectory. If you wish to have your LUFA project included,
+ *  please email it to the Library author.
+ *
+ *  \section Sec_AppOverview Overview of Included Library Applications
+ *  The following shows the folder structure of the included library applications, including demos, bootloaders and user-submitted
+ *  open source projects.
+ *
+ *  <small>
+ *
+ *  - <b>Demos</b>
+ *    - <b>Device</b>
+ *      - <b>ClassDriver</b>
+ *        - <b>AudioInput</b> - Audio In (microphone) demo, using the library USB Audio Class driver framework
+ *        - <b>AudioOutput</b> - Audio Out (speaker) demo, using the library USB Audio Class driver framework
+ *        - <b>DualVirtualSerial</b> - Dual Virtual Serial Port demo, using the library USB CDC Class driver framework
+ *        - <b>GenericHID</b> - Generic Human Interface Class demo, using the library USB HID Class driver framework
+ *        - <b>Joystick</b> - USB Joystick demo, using the library USB HID Class driver framework
+ *        - <b>Keyboard</b> - USB Keyboard demo, using the library USB HID Class driver framework
+ *        - <b>KeyboardMouse</b> - Dual Keyboard/Mouse demo, using the library USB HID Class driver framework
+ *        - <b>MassStorage</b> - Dual Drive Mass Storage demo, using the library USB Mass Storage Class driver framework
+ *        - <b>MassStorageKeyboard</b> - Mass Storage and Keyboard demo, using the library USB Mass Storage/HID Class driver frameworks
+ *        - <b>MIDI</b> - MIDI In demo, using the library USB MIDI-Audio Class driver framework
+ *        - <b>Mouse</b> - USB Mouse demo, using the library USB HID driver framework
+ *        - <b>RNDISEthernet</b> - RNDIS Ethernet Webserver demo, using the library USB RNDIS driver framework
+ *        - <b>VirtualSerial</b> - Virtual Serial Port demo, using the library USB CDC Class driver framework
+ *        - <b>VirtualSerialMouse</b> - Virtual Serial Port and Mouse demo, using the library USB CDC and HID Class driver frameworks
+ *      - <b>LowLevel</b>
+ *        - <b>AudioInput</b> - Audio In (microphone) demo, using the low level LUFA APIs to implement the USB Audio class
+ *        - <b>AudioOutput</b> - Audio Out (speaker) demo, using the low level LUFA APIs to implement the USB Audio class
+ *        - <b>DualVirtualSerial</b> - Dual Virtual Serial Port demo, using the low level LUFA APIs to implement the USB CDC class
+ *        - <b>GenericHID</b> - Generic Human Interface Class demo, using the low level LUFA APIs to implement the USB HID class
+ *        - <b>Joystick</b> - USB Joystick demo, using the low level LUFA APIs to implement the USB HID class
+ *        - <b>Keyboard</b> - USB Keyboard demo, using the low level LUFA APIs to implement the USB HID class
+ *        - <b>KeyboardMouse</b> - Dual Keyboard/Mouse demo, using the low level LUFA APIs to implement the USB HID class
+ *        - <b>MassStorage</b> - Dual Drive Mass Storage demo, using the low level LUFA APIs to implement the USB Mass Storage class
+ *        - <b>MIDI</b> - MIDI In demo, using the low level LUFA APIs to implement the USB MIDI-Audio class
+ *        - <b>Mouse</b> - USB Mouse demo, using the low level LUFA APIs to implement the USB HID class
+ *        - <b>RNDISEthernet</b> - RNDIS Ethernet Webserver demo, using the low level LUFA APIs to implement the USB RNDIS class
+ *        - <b>VirtualSerial</b> - Virtual Serial Port demo, using the low level LUFA APIs to implement the USB CDC class
+ *      - <b>Incomplete</b>
+ *        - <b>SideShow</b> - Incomplete Windows SideShow demo, using the low level LUFA APIs to implement the USB SideShow class
+ *    - <b>Host</b>
+ *      - <b>ClassDriver</b>
+ *        - <b>JoystickHostWithParser</b> - Joystick host demo with HID Descriptor parser, using the library USB HID Class driver framework
+ *        - <b>KeyboardHost</b> - USB Keyboard host demo, using the library USB HID Class driver framework
+ *        - <b>KeyboardHostWithParser</b> - USB Keyboard host demo with HID Descriptor parser, using the library USB HID Class
+ *                                          driver framework
+ *        - <b>MassStorageHost</b> - Mass Storage host demo, using the library USB Mass Storage Class driver framework
+ *        - <b>MouseHost</b> - Mouse host demo, using the library USB HID Class driver framework
+ *        - <b>MouseHostWithParser</b> - Mouse host demo with HID Descriptor parser, using the library USB HID Class driver framework
+ *        - <b>RNDISHost</b> - RNDIS Ethernet host demo, using the library USB RNDIS Class driver framework
+ *        - <b>StillImageHost</b> - Still Image Camera host demo, using the library USB Still Image Class driver framework
+ *        - <b>VirtualSerialHost</b> - Virtual Serial Port host demo, using the library USB CDC Class driver framework
+ *      - <b>LowLevel</b>
+ *        - <b>JoystickHostWithParser</b> - Joystick host demo with HID Descriptor parser, using the low level LUFA APIs to implement 
+ *                                          the USB HID class
+ *        - <b>GenericHIDHost</b> - Generic HID host demo, using the low level LUFA APIs to implement the USB HID class
+ *        - <b>KeyboardHost</b> - USB Keyboard host demo, using the low level LUFA APIs to implement the USB HID class
+ *        - <b>KeyboardHostWithParser</b> - USB Keyboard host demo with HID Descriptor parser, using the low level LUFA APIs to
+ *                                          implement the USB HID class
+ *        - <b>MassStorageHost</b> - Mass Storage host demo, using the low level LUFA APIs to implement the USB Mass Storage class
+ *        - <b>MouseHost</b> - Mouse host demo, using the low level LUFA APIs to implement the USB HID class
+ *        - <b>MouseHostWithParser</b> - Mouse host demo with HID Descriptor parser, using the low level LUFA APIs to implement the
+ *                                       USB HID class
+ *        - <b>PrinterHost</b> - Printer host demo, using the low level LUFA APIs to implement the USB Printer class
+ *        - <b>RNDISHost</b> - RNDIS Ethernet host demo, using the low level LUFA APIs to implement the RNDIS class
+ *        - <b>StillImageHost</b> - Still Image Camera host demo, using the low level LUFA APIs to implement the USB Still Image class
+ *        - <b>VirtualSerialHost</b> - Virtual Serial Port host demo, using the low level LUFA APIs to implement the USB CDC class
+ *      - <b>Incomplete</b>
+ *        - <b>BluetoothHost</b> - Incomplete Bluetooth host demo, using the low level LUFA APIs to implement the USB Bluetooth class
+ *    - <b>DualRole</b>
+ *      - <b>ClassDriver</b>
+ *        - <b>MouseHostDevice</b> - Dual role Mouse Host and Mouse Device demo, using the library USB CDC Class driver framework
+ *  - <b>Bootloaders</b>
+ *    - <b>DFU</b> - DFU Class USB bootloader, compatible with Atmel's FLIP and the open source dfu-programmer software
+ *    - <b>CDC</b> - CDC Class USB bootloader, compatible with any AVR910 protocol programming software such as AVRDude
+ *    - <b>TeensyHID</b> - HID Class bootloader, compatible with the PJRC TeensyLoader software
+ *  - <b>Projects</b>
+ *    - <b>AVRISP-MKII</b> - AVRISP-MKII Programmer Clone project
+ *    - <b>Benito</b> - Benito Board Arduino Programmer project
+ *    - <b>LEDNotifier</b> - USB LED Notification project
+ *    - <b>Magstripe</b> - Magnetic Stripe Card Reader project
+ *    - <b>MissileLaucher</b> - Toy Missile Launcher Host project
+ *    - <b>RelayBoard</b> - Relay board controller, controllable via the "sismpctl" Linux application
+ *    - <b>TemperatureDataLogger</b> - Temperature Datalogging project, using the FatFS library
+ *    - <b>USBtoSerial</b> - USB to USART Serial Converter project
+ *    - <b>Webserver</b> - RNDIS Host Webserver with DHCP client, powered by uIP TCP/IP stack project and FatFS library
+ *    - <b>XPLAINBridge</b> - XPLAIN alternative PDI Programmer/USB to Serial Bridge firmware project
+ *    - <b>Incomplete</b>
+ *      - <b>MIDIToneGenerator</b> - Incomplete MIDI Tone Generator application, to convert MIDI note messages into audio tones
+ *      - <b>StandaloneProgrammer</b> - Incomplete Standalone AVR Programmer application, to program AVRs directly from a Mass Storage disk
+ *
+ *  </small>
  */
\ No newline at end of file
diff --git a/LUFA/ManPages/LibraryResources.txt b/LUFA/ManPages/LibraryResources.txt
index f189d0a97..4ccdf1e37 100644
--- a/LUFA/ManPages/LibraryResources.txt
+++ b/LUFA/ManPages/LibraryResources.txt
@@ -1,34 +1,34 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

- 

-/**

- *  \page Page_Resources Library Resources

- *

- *  \section Sec_ProjectPages LUFA Related Webpages

- *  Project Homepage: http://www.fourwalledcubicle.com/LUFA.php \n

- *  Author's Website: http://www.fourwalledcubicle.com \n

- *  Development Blog: http://www.fourwalledcubicle.com/blog \n

- *  Commercial Licences: http://fourwalledcubicle.com/PurchaseLUFA.php \n

- *

- *  \section Sec_ProjectHelp Assistance With LUFA

- *  Discussion Group: http://groups.google.com/group/myusb-support-list \n

- *  Author's Email: dean [at] fourwalledcubicle [dot] com

- *  Author's Skype: abcminiuser

- *

- *  \section Sec_InDevelopment Latest In-Development Source Code

- *  Official Releases, SVN Access, Issue Tracker: http://code.google.com/p/lufa-lib/ \n

- *  Git Access: http://github.com/abcminiuser/lufa-lib \n

- *  Development Source Archives: http://github.com/abcminiuser/lufa-lib/archives/master \n

- *  Commit RSS Feed: http://github.com/feeds/abcminiuser/commits/lufa-lib/master \n

- *

- *  \section Sec_Toolchain AVR Toolchain

- *  WinAVR Website: http://winavr.sourceforge.net \n

- *  avr-libc Website: http://www.nongnu.org/avr-libc/ \n

- *

- *  \section Sec_USBResources USB Resources

- *  USB-IF Website: http://www.usb.org \n

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+ 
+/**
+ *  \page Page_Resources Library Resources
+ *
+ *  \section Sec_ProjectPages LUFA Related Webpages
+ *  Project Homepage: http://www.fourwalledcubicle.com/LUFA.php \n
+ *  Author's Website: http://www.fourwalledcubicle.com \n
+ *  Development Blog: http://www.fourwalledcubicle.com/blog \n
+ *  Commercial Licences: http://fourwalledcubicle.com/PurchaseLUFA.php \n
+ *
+ *  \section Sec_ProjectHelp Assistance With LUFA
+ *  Discussion Group: http://groups.google.com/group/myusb-support-list \n
+ *  Author's Email: dean [at] fourwalledcubicle [dot] com
+ *  Author's Skype: abcminiuser
+ *
+ *  \section Sec_InDevelopment Latest In-Development Source Code
+ *  Official Releases, SVN Access, Issue Tracker: http://code.google.com/p/lufa-lib/ \n
+ *  Git Access: http://github.com/abcminiuser/lufa-lib \n
+ *  Development Source Archives: http://github.com/abcminiuser/lufa-lib/archives/master \n
+ *  Commit RSS Feed: http://github.com/feeds/abcminiuser/commits/lufa-lib/master \n
+ *
+ *  \section Sec_Toolchain AVR Toolchain
+ *  WinAVR Website: http://winavr.sourceforge.net \n
+ *  avr-libc Website: http://www.nongnu.org/avr-libc/ \n
+ *
+ *  \section Sec_USBResources USB Resources
+ *  USB-IF Website: http://www.usb.org \n
+ */
  
\ No newline at end of file
diff --git a/LUFA/ManPages/LicenceInfo.txt b/LUFA/ManPages/LicenceInfo.txt
index f105db7dc..3dd1d0918 100644
--- a/LUFA/ManPages/LicenceInfo.txt
+++ b/LUFA/ManPages/LicenceInfo.txt
@@ -1,20 +1,20 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/**

- *  \page Page_LicenceInfo Source Code Licence

- *

- *  The LUFA library is currently released under the MIT licence, included below.

- *

- *  Commercial entities can opt out of the public disclosure clause in this license

- *  for a one-time US$1500 payment. This provides a non-exclusive modified MIT licensed which

- *  allows for the free use of the LUFA library, bootloaders and (where the sole copyright

- *  is attributed to Dean Camera) demos without public disclosure within an organisation, in

- *  addition to three free hours of consultation with the library author, and priority support.

- *  Please contact the author for more information via the address shown on on \ref Page_Resources.

- *

- *  \verbinclude License.txt

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/**
+ *  \page Page_LicenceInfo Source Code Licence
+ *
+ *  The LUFA library is currently released under the MIT licence, included below.
+ *
+ *  Commercial entities can opt out of the public disclosure clause in this license
+ *  for a one-time US$1500 payment. This provides a non-exclusive modified MIT licensed which
+ *  allows for the free use of the LUFA library, bootloaders and (where the sole copyright
+ *  is attributed to Dean Camera) demos without public disclosure within an organisation, in
+ *  addition to three free hours of consultation with the library author, and priority support.
+ *  Please contact the author for more information via the address shown on on \ref Page_Resources.
+ *
+ *  \verbinclude License.txt
+ */
diff --git a/LUFA/ManPages/MainPage.txt b/LUFA/ManPages/MainPage.txt
index c67ba6483..e1fe98341 100644
--- a/LUFA/ManPages/MainPage.txt
+++ b/LUFA/ManPages/MainPage.txt
@@ -1,45 +1,45 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/**

- *  \mainpage

- *

- *  \image html LUFA.png

- *  <div align="center"><small><i>Logo design by <b>Ryo</b> - http://ryophotography.wordpress.com</i></small></div>

- *  \n

- *

- *  <b>LUFA is donationware. For author and donation information, see \ref Page_Donating.</b>

- *

- *  LUFA is an open-source USB library for the USB-enabled AVR microcontrollers, released under the MIT license (see \ref Page_LicenceInfo).

- *  It supports a large number of USB AVR models and boards (see \ref Page_DeviceSupport). It is designed to provide an easy to use,

- *  feature rich framework for the development of USB peripherals and hosts.

- *

- *  LUFA focuses on the microcontroller side of USB development only; it includes no PC host USB driver development facilities - other projects

- *  such as the Windows Driver Development Kit, Windows USB Device Mode Framework and libusb may be of interest for developing custom OS drivers.

- *  While custom USB devices can be made with LUFA using such tools, the included demos all use the inbuilt OS drivers for each USB class for

- *  simplicity.

- *

- *  The library is currently in a stable release, suitable for download and incorporation into user projects for

- *  both host and device modes. For information about the project progression, see the blog link at \ref Page_Resources.

- *

- *  LUFA is written specifically for the free AVR-GCC compiler, and uses several GCC-only extensions to make the

- *  library API more streamlined and robust. You can download AVR-GCC for free in a convenient windows package, 

- *  from the the WinAVR website (see \ref Page_Resources).

- *

- *  The only required AVR peripherals for LUFA is the USB controller itself and interrupts - LUFA does not require the use of the

- *  microcontroller's timers or other hardware, leaving more hardware to the application developer.

- *

- *  Accompanying LUFA in the download package is a set of example demo applications, plus several Bootloaders of different classes

- *  and open source LUFA powered projects.

- *

- *  <b>Subsections:</b>

- *  - \subpage Page_WhyUseLUFA What are the advantages of using LUFA?

- *  - \subpage Page_LUFAvsAtmelStack How does LUFA compare to the Atmel USB AVR stack?

- *  - \subpage Page_AlternativeStacks Alternative USB AVR Stacks

- *  - \subpage Page_LicenceInfo Project source licence and commercial use information

- *  - \subpage Page_Donating Donating to support this project

- *  - \subpage Page_LibraryApps Overview of included Demos, Bootloaders and Projects

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/**
+ *  \mainpage
+ *
+ *  \image html LUFA.png
+ *  <div align="center"><small><i>Logo design by <b>Ryo</b> - http://ryophotography.wordpress.com</i></small></div>
+ *  \n
+ *
+ *  <b>LUFA is donationware. For author and donation information, see \ref Page_Donating.</b>
+ *
+ *  LUFA is an open-source USB library for the USB-enabled AVR microcontrollers, released under the MIT license (see \ref Page_LicenceInfo).
+ *  It supports a large number of USB AVR models and boards (see \ref Page_DeviceSupport). It is designed to provide an easy to use,
+ *  feature rich framework for the development of USB peripherals and hosts.
+ *
+ *  LUFA focuses on the microcontroller side of USB development only; it includes no PC host USB driver development facilities - other projects
+ *  such as the Windows Driver Development Kit, Windows USB Device Mode Framework and libusb may be of interest for developing custom OS drivers.
+ *  While custom USB devices can be made with LUFA using such tools, the included demos all use the inbuilt OS drivers for each USB class for
+ *  simplicity.
+ *
+ *  The library is currently in a stable release, suitable for download and incorporation into user projects for
+ *  both host and device modes. For information about the project progression, see the blog link at \ref Page_Resources.
+ *
+ *  LUFA is written specifically for the free AVR-GCC compiler, and uses several GCC-only extensions to make the
+ *  library API more streamlined and robust. You can download AVR-GCC for free in a convenient windows package, 
+ *  from the the WinAVR website (see \ref Page_Resources).
+ *
+ *  The only required AVR peripherals for LUFA is the USB controller itself and interrupts - LUFA does not require the use of the
+ *  microcontroller's timers or other hardware, leaving more hardware to the application developer.
+ *
+ *  Accompanying LUFA in the download package is a set of example demo applications, plus several Bootloaders of different classes
+ *  and open source LUFA powered projects.
+ *
+ *  <b>Subsections:</b>
+ *  - \subpage Page_WhyUseLUFA What are the advantages of using LUFA?
+ *  - \subpage Page_LUFAvsAtmelStack How does LUFA compare to the Atmel USB AVR stack?
+ *  - \subpage Page_AlternativeStacks Alternative USB AVR Stacks
+ *  - \subpage Page_LicenceInfo Project source licence and commercial use information
+ *  - \subpage Page_Donating Donating to support this project
+ *  - \subpage Page_LibraryApps Overview of included Demos, Bootloaders and Projects
+ */
diff --git a/LUFA/ManPages/MigrationInformation.txt b/LUFA/ManPages/MigrationInformation.txt
index 11dd346e4..8db33b401 100644
--- a/LUFA/ManPages/MigrationInformation.txt
+++ b/LUFA/ManPages/MigrationInformation.txt
@@ -1,491 +1,491 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \page Page_Migration Migrating from Older Versions

- *

- *  Below is migration information for updating existing projects based on previous versions of the LUFA library

- *  to the next version released. It does not indicate all new additions to the library in each version change, only

- *  areas relevant to making older projects compatible with the API changes of each new release.

- *

- * \section Sec_MigrationXXXXXX Migrating from 100219 to XXXXXX

- *

- *  <b>Non-USB Library Components</b>

- *    - The \ref TWI_StartTransmission() function now takes in a timeout period, expressed in milliseconds, within which the addressed

- *      device must respond or the function will abort.

- *

- *  <b>Device Mode</b>

- *    - The \ref USB_Init() function no longer calls sei() to enable global interrupts, as the user application may need

- *      to perform other initialization before it is ready to handle global interrupts. The user application is now responsible

- *      for enabling global interrupts before or shortly after calling \ref USB_Init() to ensure that the enumeration process

- *      functions correctly.

- *    - The USBInterrupt.c USB driver source file has been relocated from LUFA/Drivers/USB/HighLevel/ to LUFA/Drivers/USB/LowLevel.

- *      Projects must update their makefile SRC values accordingly.

- *

- *  <b>Host Mode</b>

- *    - The \ref USB_Init() function no longer calls sei() to enable global interrupts, as the user application may need

- *      to perform other initialization before it is ready to handle global interrupts. The user application is now responsible

- *      for enabling global interrupts before or shortly after calling \ref USB_Init() to ensure that the enumeration process

- *      functions correctly.

- *    - The USBInterrupt.c USB driver source file has been relocated from LUFA/Drivers/USB/HighLevel/ to LUFA/Drivers/USB/LowLevel.

- *      Projects must update their makefile SRC values accordingly.

- *

- * \section Sec_Migration100219 Migrating from 091223 to 100219

- *

- *  <b>Non-USB Library Components</b>

- *    - Due to some ADC channels not being identical to their ADC MUX selection masks for single-ended conversions on some AVR models,

- *      the ADC driver now has explicit masks for each of the standard ADC channels (see \ref Group_ADC). These masks should be used 

- *      when calling the ADC functions to ensure proper operation across all AVR models. Note that the \ref ADC_SetupChannel() function 

- *      is an exception, and should always be called with a channel number rather than a channel mask.

- *

- *  <b>Host Mode</b>

- *    - The MIDI Host Class driver send and receive routines now operate on packed events, where multiple MIDI events may be

- *      packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send

- *      pipe bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually

- *      flush the queued event(s) to the device by calling \ref MIDI_Host_Flush().

- *    - The Pipe_IsEndpointBound() function now takes the endpoint's direction into account, by checking if the MSB of the endpoint's address

- *      is set to denote IN endpoints. If the previous functionality where the direction is to be discounted is required, mask the endpoint

- *      address against the \ref PIPE_EPNUM_MASK token before calling Pipe_IsEndpointBound().

- *

- *  <b>Device Mode</b>

- *    - The MIDI Device Class driver send and receive routines now operate on packed events, where multiple MIDI events may be

- *      packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send

- *      endpoint bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually

- *      flush the queued event(s) to the host by calling \ref MIDI_Device_Flush().

- *

- * \section Sec_Migration091223 Migrating from 091122 to 091223

- *

- *  <b>Host Mode</b>

- *    - The Still Image Host Class driver SI_Host_USBTask() and SI_Host_ConfigurePipes() functions were misnamed, and are

- *      now named \ref SImage_Host_USBTask() and \ref SImage_Host_ConfigurePipes() respectively.

- *    - The HOST_SENDCONTROL_DeviceDisconnect enum value has been renamed to \ref HOST_SENDCONTROL_DeviceDisconnected to be in

- *      line with the rest of the library error codes.

- *    - The HID Parser item usages no longer contain seperate minimum and maximum values, as this was a violation of the HID

- *      specification. Instead, the values are distributed evenly across each item as its usage value, to ensure that all items

- *      can be distinguished from oneanother.

- *

- *  <b>Device Mode</b>

- *    - The CALLBACK_HID_Device_CreateHIDReport() HID Device Class driver callback now has a new ReportType parameter to

- *      indicate the report type to generate. Existing applications may simply add and ignore this additional parameter.

- *

- * \section Sec_Migration091122 Migrating from 090924 to 091122

- *  

- *  <b>Host Mode</b>

- *    - The HID_PARSE_UsageStackOverflow HID parser error constant is now named \ref HID_PARSE_UsageListOverflow

- *    - The \ref CALLBACK_HIDParser_FilterHIDReportItem() HID Parser callback now passes a complete HID_ReportItem_t to the

- *      user application, instead of just its attributes.

- *    - The USB_GetDeviceConfigDescriptor() function was incorrectly named and is now called \ref USB_Host_GetDeviceConfigDescriptor().

- *

- * \section Sec_Migration090924 Migrating from 090810 to 090924

- *

- *  <b>Non-USB Library Components</b>

- *    - The ADC_Off() function has been renamed to \ref ADC_ShutDown() to be consistent with the rest of the library.

- *    - The \ref SPI_Init() routine's parameters have changed, so that the clock polarity and data sampling modes can be set. See

- *      the \ref SPI_Init() function documentation for more details

- *    - The \ref Dataflash_Init() routine no longer initializes the SPI bus - the SPI bus should be initialized manually via a

- *      call to SPI_Init() before using the Dataflash driver

- *

- *  <b>Host Mode</b>

- *    - The USB_GetDeviceConfigDescriptor() function's parameters and behaviour has changed; the user is required to

- *      preallocate the largest allowable buffer, and pass the size of the buffer to the function. This allows for a single

- *      call to the function to retrieve, size check and validate the Configuration Descriptor rather than having the user

- *      application perform these intermediatary steps.

- *    - The HID report parser now requires a mandatory callback in the user code, to filter only the items the application

- *      is interested in into the processed HID report item structure to save RAM. See \ref CALLBACK_HIDParser_FilterHIDReportItem().

- *    - The HID report parser now always parses FEATURE and always ignores constant-data items - the HID_ENABLE_FEATURE_PROCESSING

- *      and HID_INCLUDE_CONSTANT_DATA_ITEMS compile time tokens now have no effect.

- *    - The USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now seperate USB_Descriptor_*

- *      and USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in

- *      the one project. For existing projects using the standardized names, change all code to use the USB_StdDescriptor_* variants.

- *

- *  <b>Device Mode</b>

- *    - The USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now seperate USB_Descriptor_*

- *      and USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in

- *      the one project. For existing projects using the standardized names, change all code to use the USB_StdDescriptor_* variants.

- *

- * \section Sec_Migration090810 Migrating from 090605 to 090810

- *

- *  <b>All</b>

- *    - The "Simple Scheduler" has been <i>deprecated</i>, as it was little more than an abtracted loop and caused much confusion.

- *      User applications using the scheduler should switch to regular loops instead. The scheduler code will be removed in a future

- *      release.

- *    - The "Dynamic Memory Block Allocator" has been removed, as it was unused in (and unrelated to) the LUFA library and never

- *      used in user applications. The library is available from the author's website for those wishing to still use it in their

- *      applications.

- *

- *  <b>Non-USB Library Components</b>

- *    - The ATTR_NOINLINE function attribute macro has been renamed to ATTR_NO_INLINE to be in line with the rest of the function attribute

- *      macro names.

- *

- *  <b>Library Demos</b>

- *    - Most demos now have a corresponding Class Driver implementation, which uses the new internal library class drivers for the standard

- *      USB classes. This allows for more rapid device and host development, and so should be used in preference to the low level APIs where

- *      possible so that fixes to the class drivers propagate to all applications which use them automatically with each new LUFA release.

- *

- *  <b>Host Mode</b>

- *    - The HIDParser.c module has moved from LUFA/Drivers/USB/Class/ to LUFA/Drivers/USB/Class/Host/.

- *    - The USB_GetDeviceConfigDescriptor() function now requires the desired configuration index within the device as its first

- *      parameter, to add support for multi-configuration devices. Existing code should use a configuration index of 1 to indicate the

- *      first configuration descriptor within the device.

- *    - The non-standard "Ready" host state has been removed. Existing \ref HOST_STATE_Configured code should be moved to the end of

- *      the existing \ref HOST_STATE_Addressed state, and the existing HOST_STATE_Ready state code should be moved to the \ref HOST_STATE_Configured

- *      state.

- *    - The USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_HostState explicitly to ensure the host is

- *      in the desired state instead.

- *    - The USB event names have been changed and their firing conditions changed to properly seperate out Host mode events from Device mode

- *      events. See the \ref Group_Events page for details on the new event names and firing conditions.

- *

- *  <b>Device Mode</b>

- *    - The \ref CALLBACK_USB_GetDescriptor() function now takes an extra parameter to specify the descriptor's memory space so that

- *      descriptors in mixed memory spaces can be used. The previous functionality can be returned by defining the USE_FLASH_DESCRIPTORS

- *      token in the project makefile to fix all descriptors into FLASH space and remove the extra function parameter.

- *    - The USB_IsSuspended global has been removed - test \ref USB_DeviceState against \ref DEVICE_STATE_Suspended instead.

- *    - The USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_DeviceState explicitly to ensure the device

- *      is in the desired state instead.

- *    - The VBUS events have been removed, as they are already exposed to the user via the USB_Connect and USB_Disconnect events.

- *    - The USB event names have been changed and their firing conditions changed to properly seperate out Host mode events from Device mode

- *      events. See the \ref Group_Events page for details on the new event names and firing conditions. *

- *

- * \section Sec_Migration090605 Migrating from 090510 to 090605

- *

- *  <b>Device Mode</b>

- *    - Support for non-control data endpoint interrupts has been dropped due to many issues in the implementation. All existing

- *      projects using interrupts on non-control endpoints should switch to polling. For control interrupts, the library can

- *      manage the control endpoint via interrupts automatically by compiling with the INTERRUPT_CONTROL_ENDPOINT token defined.

- *    - The DESCRIPTOR_ADDRESS() macro has been removed. User applications should use normal casts to obtain a descriptor's memory

- *      address.

- *    - The library events system has been rewritten, so that all macros have been removed to allow for clearer user code. See

- *      \ref Group_Events for new API details.

- *    - The STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular

- *      function signatures of a function accepting no arguments and returning a uint8_t value.

- *    - The Event_DeviceError() event no longer exists, as its sole caller (unlinked USB_GetDescriptor() function) now produces a

- *      compilation error rather than a runtime error. The StdDescriptors.c file no longer exists as a result, and should be removed

- *      from project makefiles.

- *    - The USB_GetDescriptor() function has been renamed to CALLBACK_USB_GetDescriptor() to be in line with the new CALLBACK_ function

- *      prefixes for functions which *must* be implemented in the user application.

- *

- *  <b>Host Mode</b>

- *    - Support for non-control data pipe interrupts has been dropped due to many issues in the implementation. All existing

- *      projects using interrupts on non-control pipes should switch to polling.

- *    - The library events system has been rewritten, so that all macros have been removed to allow for clearer user code. See

- *      \ref Group_Events for new API details.

- *    - The STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular

- *      function signatures of a function accepting no arguments and returning a uint8_t value.

- *    - The DESCRIPTOR_COMPARATOR() macro has been removed. User applications should replace all instances of the macro with

- *      regular function signatures of a function accepting a void pointer to the descriptor to test, and returning a uint8_t value.

- *

- *

- * \section Sec_Migration090510 Migrating from 090401 to 090510

- *

- *  <b>All</b>

- *    - The ButtLoadTag.h header has been removed, as it was never used for its intended purpose. Projects should either remove all

- *      BUTTLOADTAG elements, or download and extract ButtLoadTag.h header from the ButtLoad project.

- *    - The Drivers/AT90USBXXX directory has been renamed to Drivers/Peripheral.

- *    - The Serial_Stream driver has been renamed to SerialStream to remain consistent with the rest of the library naming scheme.

- *    - The HWB driver has changed to the Buttons driver. See the board Buttons driver documentation for the new API.

- *

- *  <b>Dual Role Mode</b>

- *    - The USB_PowerOnFail even has been renamed to USB_InitFailure.

- *    - The functions in OTG.h have been renamed to remain more consistent with the library API. See the functions in OTG.h for more

- *      details.

- *

- *  <b>Library Demos</b>

- *    - Most demos, bootloaders and applications have had significant changes from previous versions. Applications built off of any

- *      library demos should update to the latest versions.

- *

- *  <b>Device Mode</b>

- *    - The Endpoint_ClearCurrentBank() macro has been removed, and is now replaced with the Endpoint_ClearIN(), Endpoint_ClearOUT() 

- *      macros. See Endpoint.h documentation for more details on the new endpoint management macros.

- *    - The Endpoint_ReadWriteAllowed() macro has been renamed to Endpoint_IsReadWriteAllowed() to be more consistent with the rest of

- *      the API naming scheme.

- *    - The Endpoint_IsSetupINReady() and Endpoint_IsSetupOutReceived() macros have been renamed to Endpoint_IsINReady() and

- *      Endpoint_IsOUTReceived() respectively.

- *    - The Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived().

- *    - The Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearSETUP().

- *    - All endpoint read/write/discard aliases which did not have an explicitly endianness specifier (such as Endpoint_Read_Word()) have

- *      been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions.

- *    - The USB_UnhandledControlPacket event no longer has any parameters. User code should no longer attempt to read in the remainder of

- *      the Control Request header as all Control Request header data is now preloaded by the library and made available in the

- *      USB_ControlRequest structure.

- *    - The FEATURELESS_CONTROL_ONLY_DEVICE token has been renamed to CONTROL_ONLY_DEVICE.

- *    - The STATIC_ENDPOINT_CONFIGURATION is no longer applicable as the library will apply this optimization when appropriate automatically.

- *    - The values of the Endpoint_Stream_RW_ErrorCodes_t and Endpoint_ControlStream_RW_ErrorCodes_t enums have had the "ERROR_" portion

- *      of their names removed.

- *

- *  <b>Host Mode</b>

- *    - The USB_Host_SendControlRequest() function no longer automatically selects the Control pipe (pipe 0) to allow it to be used on

- *      other control type pipes. Care should be taken to ensure that the Control pipe is always selected before the function is called

- *      in existing projects where the Control pipe is to be operated on.

- *    - The USB Host management task now saves and restores the currently selected pipe before and after the task runs. Projects no longer

- *      need to manage this manually when calling the USB management task.

- *    - The Pipe_ClearCurrentBank() macro has been removed, and is now replaced with the Pipe_ClearIN(), Pipe_ClearOUT() macros. See

- *      Pipe.h documentation for more details on the new pipe management macros.

- *    - The Pipe_ReadWriteAllowed() macro has been renamed to Pipe_IsReadWriteAllowed() to be more consistent with the rest of the API

- *      naming scheme.

- *    - The Pipe_IsSetupINReceived() and Pipe_IsOutReady() macros have been renamed to Pipe_IsINReceived() and Pipe_IsOUTReady()

- *      respectively.

- *    - The new Pipe_ClearSETUP() macro should be used to send SETUP transactions, rather than the previous Pipe_ClearSetupOUT() macro.

- *    - The Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent().

- *    - The Pipe_ClearSetupSent() macro is no longer applicable and should be removed.

- *    - All pipe read/write/discard aliases which did not have an explicitly endianness specifier (such as Pipe_Read_Word()) have

- *      been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions.

- *    - The Host_IsResetBusDone() macro has been renamed to Host_IsBusResetComplete().

- *    - The Pipe_Ignore_Word() and Pipe_Ignore_DWord() functions have been renamed to Pipe_Discard_Word() and Pipe_Discard_DWord() to remain

- *      consistent with the rest of the pipe API.

- *    - It is no longer needed to manually include the headers from LUFA/Drivers/USB/Class, as they are now included along with the rest

- *      of the USB headers when LUFA/Drivers/USB/USB.h is included.

- *    - Functions in the ConfigDescriptor.h header file no longer have "Host_" as part of their names.

- *    - The ProcessHIDReport() has been renamed to USB_ProcessHIDReport(), GetReportItemInfo() has been renamed to USB_GetHIDReportItemInfo()

- *      and SetReportItemInfo() has been renamed to USB_GetHIDReportItemInfo().

- *    - The values of the DSearch_Return_ErrorCodes_t and DSearch_Comp_Return_ErrorCodes_t enums have had their respective "Descriptor_Search"

- *      and "Descriptor_Search_Comp" prefixes changed to all caps.

- *    - The USB_HostRequest global has been renamed to USB_ControlRequest, and is used in Device mode also. The USB_Host_Request_Header_t

- *      structure type has been renamed to USB_Request_Header_t.

- *    - The values of the Pipe_Stream_RW_ErrorCodes_t enum have had the "ERROR_" portion of their names removed.

- *

- *

- * \section Sec_Migration090401 Migrating from 090209 to 090401

- *

- *  <b>All</b>

- *    - LUFA projects must now give the raw input clock frequency (before any prescaling) as a compile time constant "F_CLOCK",

- *      defined in the project makefile and passed to the compiler via the -D switch.

- *    - The makefile EEPROM programming targets for FLIP and dfu-programmer no longer program in the FLASH data in addition to the

- *      EEPROM data into the device. If both are to be programmed, both the EEPROM and FLASH programming targets must be called.

- *    - As the avr-libc macro has been corrected in recent avr-libc distributions, the SetSystemClockPrescaler() macro has been removed.

- *      Include <avr/power.h> and call clock_prescale_set(clock_div_1); instead on recent avr-libc distributions.

- *

- *  <b>Library Demos</b>

- *    - The USBtoSerial demo now discards all data when not connected to a host, rather than buffering it for later transmission.

- *    - Most demos, bootloaders and applications have had their control request handling code corrected, to properly send the status

- *      stage in all handled requests. If you are using code based off one of the library demos, bootloaders or applications, you should

- *      update to the latest revisions.

- *

- *  <b>Non-USB Library Components</b>

- *    - The ATTR_ALWAYSINLINE function attribute macro has been renamed to ATTR_ALWAYS_INLINE.

- *    - Custom board Dataflash drivers now require the implementation of Dataflash_SelectChipFromPage() and Dataflash_SendAddressBytes().

- *

- *  <b>Device Mode</b>

- *    - The NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded

- *      to also remove parts of the Get Status chapter 9 request to further reduce code usage. On all applications currently using the 

- *      NO_CLEARSET_FEATURE_REQUEST compile time token, it can be replaced with the FEATURELESS_CONTROL_ONLY_DEVICE token with no further

- *      modifications required.

- *

- *

- * \section Sec_Migration090209 Migrating from 081217 to 090209

- *

- *  <b>Device Mode</b>

- *    - The ENDPOINT_MAX_ENDPOINTS constant has been renamed to the more appropriate name of ENDPOINT_TOTAL_ENDPOINTS.

- *    - The USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user

- *      makefile if desired to restore the previous 50ms timeout.

- *

- *  <b>Host Mode</b>

- *    - The PIPE_MAX_ENDPOINTS constant has been renamed to the more appropriate name of PIPE_TOTAL_ENDPOINTS.

- *    - The USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user

- *      makefile if desired to restore the previous 50ms timeout.

- *    - The USB_DeviceEnumerationFailed event now contains a second "SubErrorCode" parameter, giving the error code of the function

- *      which failed.

- *    - The HID_PARSE_Sucessful enum member constant has been corrected to HID_PARSE_Successful.

- *

- *  <b>Non-USB Library Components</b>

- *    - The previous SPI_SendByte() functionality is now located in SPI_TransferByte(). SPI_SendByte() now discards the return byte

- *      for speed, to compliment the new SPI_ReceiveByte() function. If two-way SPI transfers are required, calls to SPI_SendByte()

- *      should be changed to SPI_TransferByte().

- *    - The serial driver now sets the Tx line as an output explicitly, and enables the pullup of the Rx line.

- *    - The Serial_Init() and SerialStream_Init() functions now take a second DoubleSpeed parameter, which indicates if the USART

- *      should be initialized in double speed mode - useful in some circumstances for attaining baud rates not usually possible at

- *      the given AVR clock speed.

- *

- *  <b>Library Demos</b>

- *    - Most library demos have been enhanced and/or had errors corrected. All users of all demos should upgrade their codebase to

- *      the latest demo versions.

- *

- *

- * \section Sec_Migration171208 Migrating from V1.5.3 to 081217

- *

- *  <b>All</b>

- *    - The MyUSB project name has been changed to LUFA (Lightweight Framework for USB AVRs). All references to MyUSB, including macro names,

- *      have been changed to LUFA.

- *

- *  <b>Library Demos</b>

- *    - The ReconfigureUSART() routine in the USBtoSerial demo was not being called after new line encoding

- *      parameters were set by the host. Projects built on the USBtoSerial code should update to the latest version.

- *    - The HID Parser now supports multiple report (on a single endpoint) HID devices. The MouseHostWithParser and

- *      KeyboardHostWithPaser demos use the updated API functions to function correctly on such devices. Projects

- *      built on either "WithParser" demo should update to the latest code.

- *    - The RNDIS demo TCP stack has been modified so that connections can be properly closed. It is still not

- *      recommended that the MyUSB RNDIS demo TCP/IP stack be used for anything other than demonstration purposes,

- *      as it is neither a full nor a standards compliant implementation.

- *

- *  <b>Non-USB Library Components</b>

- *    - The Serial_IsCharReceived() macro has been changed to the correct spelling of Serial_IsCharReceived() in Serial.h.

- *

- *  <b>Device Mode</b>

- *    - The MANUAL_PLL_CONTROL compile time token has been removed, and replaced with a USB_OPT_MANUAL_PLL mask

- *      to be used in the Options parameter of the USB_Init() function.

- *    - Calling USB_Init() now forces a complete USB interface reset and enumeration, even if the USB interface is

- *      currently initialized.

- *    - Interrupts are now disabled when processing control requests, to avoid problems with interrupts causing the library

- *      or user request processing code to exceed the strict USB timing requirements on control transfers.

- *    - The USB Reset event now resets and disables all device endpoints. If user code depends on endpoints remaining configured

- *      after a Reset event, it should be altered to explicitly re-initialize all user endpoints.

- *    - The prototype for the GetDescriptor function has been changed, as the return value was redundant. The function now

- *      returns the size of the descriptor, rather than passing it back via a parameter, or returns NO_DESCRIPTOR if the specified

- *      descriptor does not exist.

- *    - The NO_DESCRIPTOR_STRING macro has been renamed NO_DESCRIPTOR, and is now also used as a possible return value for the

- *      GetDescriptor function.

- *

- *  <b>Host Mode</b>

- *    - The MANUAL_PLL_CONTROL compile time token has been removed, and replaced with a USB_OPT_MANUAL_PLL mask

- *      to be used in the Options parameter of the USB_Init() function.

- *    - The HID report parser now supports multiple Report IDs. The HID report parser GetReportItemInfo() and

- *      SetReportItemInfo() routines now return a boolean, set if the requested report item was located in the

- *      current report. If sending a report to a multi-report device, the first byte of the report is automatically

- *      set to the report ID of the given report item.

- *    - Calling USB_Init() now forces a complete USB interface reset and enumeration, even if the USB interface is

- *      currently initialized.

- *

- *

- * \section Sec_Migration152 Migrating from V1.5.2 to V1.5.3

- *

- *  <b>Library Demos</b>

- *    - Previously, all demos contained a serial number string descriptor, filled with all zeros. A serial number

- *      string is required in Mass Storage devices, or devices which are to retain settings when moved between

- *      ports on a machine. As people were not changing the serial number value, this was causing conflicts and so

- *      the serial number descriptor has been removed from all but the Mass Storage demo, which requires it.

- *    - The AudioOut and AudioIn demos did not previously silence their endpoints when the host has deactivated

- *      them. Projects built upon either demo should upgrade to the latest code.

- *    - The FEATURE_ENDPOINT macro has been renamed FEATURE_ENDPOINT_HALT, and is now correctly documented.

- *    - The MassStoreHost demo contained errors which caused it to lock up randomly on certain devices. Projects built

- *      on the MassStoreDemo code should update to the latest version.

- *    - The Interrupt type endpoint in the CDC based demos previously had a polling interval of 0x02, which caused

- *      problems on some Linux systems. This has been changed to 0xFF, projects built on the CDC demos should upgrade

- *      to the latest code.

- *    - The HID keyboard and mouse demos were not previously boot mode compatible. To enable boot mode support, projects

- *      built on the keyboard or mouse demos (or derivatives) should upgrade to the latest code.

- *    - The Mass Storage demo was not previously standards compliant. Projects built on the Mass Storage demo should

- *      upgrade to the latest code.

- *    - The USART was not being reconfigured after the host sent new encoding settings in the USBtoSerial demo. This was

- *      previously discovered and fixed, but the change was lost. Projects built on the USBtoSerial demo should update

- *      to the latest code.

- *

- *  <b>Device Mode</b>

- *    - The endpoint non-control stream functions now have a default timeout of 50ms between packets in the stream.

- *      If this timeout is exceeded, the function returns the new ENDPOINT_RWSTREAM_ERROR_Timeout error value. The

- *      timeout value can be overridden by defining the USB_STREAM_TIMEOUT_MS in the project makefile to the desired

- *      timeout duration in ms.

- *    - Rather than returning fixed values, the flags indicating if the device has Remote Wakeup currently enabled

- *      and/or is self-powered are now accessed and set through the new USB_RemoteWakeupEnabled and

- *      USB_CurrentlySelfPowered macros. See the DevChapter9.h documentation for more details.

- *    - All endpoint stream functions now require an extra Callback function parameter. Existing code may be updated

- *      to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing

- *      the token NO_STREAM_CALLBACKS to the compiler using the -D switch.

- *

- *  <b>Host Mode</b>

- *    - The pipe non-control stream functions now have a default timeout of 50ms between packets in the stream.

- *      If this timeout is exceeded, the function returns the new PIPE_RWSTREAM_ERROR_Timeout error value. The

- *      timeout value can be overridden by defining the USB_STREAM_TIMEOUT_MS in the project makefile to the desired

- *      timeout duration in ms.

- *    - CollectionPath_t has been renamed to HID_CollectionPath_t to be more in line with the other HID parser structures.

- *    - All pipe stream functions now require an extra Callback function parameter. Existing code may be updated

- *      to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing

- *      the token NO_STREAM_CALLBACKS to the compiler using the -D switch.

- *

- *

- * \section Sec_Migration151 Migrating from V1.5.1 to V1.5.2

- *

- *  <b>Library Demos</b>

- *    - The RNDIS demo application has been updated so that it is functional on Linux under earlier implementations

- *      of the RNDIS specification, which had non-standard behaviour. Projects built upon the demo should upgrade

- *      to the latest code.

- *    - The DFU class bootloader has had several bugs corrected in this release. It is recommended that where

- *      possible any existing devices upgrade to the latest bootloader code.

- *

- *

- * \section Sec_Migration150 Migrating from V1.5.0 to V1.5.1

- *

- *  <b>Library Demos</b>

- *    - The USBtoSerial demo was broken in the 1.5.0 release, due to incorrect register polling in place of the

- *      global "Transmitting" flag. The change has been reverted in this release. Projects built upon the demo

- *      should upgrade to the latest code.

- *    - The HID class demos did not implement the mandatory GetReport HID class request. Projects built upon the HID

- *      demos should upgrade to the latest code.

- *    - The HID class demos incorrectly reported themselves as boot-protocol enabled HID devices in their descriptors.

- *      Projects built upon the HID demos should upgrade to the latest code.

- *    - The MIDI device demo had incorrect AudioStreaming interface descriptors. Projects built upon the MIDI demo

- *      should upgrade to the latest code.

- *    - The AudioOut demo did not correctly tristate the speaker pins when USB was disconnected, wasting power.

- *      Projects built upon the AudioOut demo should upgrade to the latest code.

- *

- *

- * \section Sec_Migration141 Migrating from V1.4.1 to V1.5.0

- *

- *  <b>Library Demos</b>

- *    - Previous versions of the library demos had incorrectly encoded BCD version numbers in the descriptors. To

- *      avoid such mistakes in the future, the VERSION_BCD macro has been added to StdDescriptors.h. Existing

- *      projects should at least manually correct the BCD version numbers, or preferably update the descriptors to

- *      encode the version number in BCD format using the new macro.

- *    - The mandatory GetReport class-specific request was accidentally omitted from previous versions of the demos

- *      based on the Human Interface Device (HID) class. This has been corrected, and any user projects based on the

- *      HID demos should also be updated accordingly.

- *    - The CDC demos now correctly send an empty packet directly after a full packet, to end the transmission.

- *      Failure to do this on projects which always or frequently send full packets will cause buffering issues on

- *      the host OS. All CDC user projects are advised to update their transmission routines in the same manner as

- *      the library CDC demos.

- *    - The previous interrupt-driven Endpoint/Pipe demos did not properly save and restore the currently selected

- *      Endpoint/Pipe when the ISR fired. This has been corrected - user projects based on the interrupt driven

- *      demos should also update to properly save and restore the selected Endpoint/Pipe.

- *

- *  <b>Non-USB Library Components</b>

- *    - The Atomic.h and ISRMacro.h header files in MyUSB/Common have been removed, as the library is now only

- *      compatible with avr-libc library versions newer than the time before the functionality of the deleted

- *      headers was available.

- *

- *  <b>Device Mode</b>

- *    - The GetDescriptor function (see StdDescriptors.h) now has a new prototype, with altered parameter names and

- *      functions. Existing projects will need to update the GetDescriptor implementation to reflect the new API.

- *      The previously split Type and Index parameters are now passed as the original wValue parameter to the

- *      function, to make way for the USB specification wIndex parameter which is <i>not</i> the same as the

- *      previous Index parameter.

- *    - The USB_UnhandledControlPacket event (see Events.h) now has new parameter names, to be in line with the

- *      official USB specification. Existing code will need to be altered to use the new parameter names.

- *    - The USB_CreateEndpoints event (see Events.h) has been renamed to USB_ConfigurationChanged, which is more

- *      appropriate. It fires in an identical manner to the previously named event, thus the only change to be made

- *      is the event name itself in the user project.

- *    - The USB_Descriptor_Language_t structure no longer exists in StdDescriptors.h, as this was a

- *      pseudo-descriptor modelled on the string descriptor. It is replaced by the true USB_Descriptor_String_t type

- *      descriptor as indicated in the USB specification, thus all device code must be updated accordingly.

- *    - The names of several Endpoint macros have been changed to be more consistent with the rest of the library,

- *      with no implementation changes. This means that existing code can be altered to use the new macro names

- *      with no other considerations required. See Endpoint.h for the new macro names.

- *    - The previous version of the MassStorage demo had an incorrect value in the SCSI_Request_Sense_Response_t

- *      structure named SenseData in SCSI.c which caused some problems with some hosts. User projects based on this

- *      demo should correct the structure value to maintain compatibility across multiple OS platforms.

- *    - By default, the descriptor structures use the official USB specification names for the elements. Previous

- *      versions of the library used non-standard (but more verbose) names, which are still usable in the current

- *      and future releases when the correct compile time option is enabled. See the StdDescriptors.h file

- *      documentation for more details.

- *

- *  <b>Host Mode</b>

- *    - The USB_Host_Request_Header_t structure in HostChapter9.h (used for issuing control requests) has had its

- *      members renamed to the official USB specification names for requests. Existing code will need to be updated

- *      to use the new names.

- *    - The names of several Pipe macros have been changed to be more consistent with the rest of the library,

- *      with no implementation changes. This means that existing code can be altered to use the new macro names

- *      with no other considerations required. See Pipe.h for the new macro names.

- *    - By default, the descriptor structures use the official USB specification names for the elements. Previous

- *      versions of the library used non-standard (but more verbose) names, which are still usable in the current

- *      and future releases when the correct compile time option is enabled. See the StdDescriptors.h file

- *      documentation for more details.

- *    - The names of the macros in Host.h for controlling the SOF generation have been renamed, see the Host.h

- *      module documentation for the new macro names.

- *

- *  <b>Dual Role Mode</b>

- *    - The OTG.h header file has been corrected so that the macros now perform their stated functions. Any existing

- *      projects using custom headers to fix the broken OTG header should now be altered to once again use the OTG

- *      header inside the library.

- *    - The USB_DeviceEnumerationComplete event (see Events.h) now also fires in Device mode, when the host has

- *      finished enumerating the device. Projects relying on the event only firing in Host mode should be updated

- *      so that the event action only occurs when the USB_Mode global is set to USB_MODE_HOST.

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \page Page_Migration Migrating from Older Versions
+ *
+ *  Below is migration information for updating existing projects based on previous versions of the LUFA library
+ *  to the next version released. It does not indicate all new additions to the library in each version change, only
+ *  areas relevant to making older projects compatible with the API changes of each new release.
+ *
+ * \section Sec_MigrationXXXXXX Migrating from 100219 to XXXXXX
+ *
+ *  <b>Non-USB Library Components</b>
+ *    - The \ref TWI_StartTransmission() function now takes in a timeout period, expressed in milliseconds, within which the addressed
+ *      device must respond or the function will abort.
+ *
+ *  <b>Device Mode</b>
+ *    - The \ref USB_Init() function no longer calls sei() to enable global interrupts, as the user application may need
+ *      to perform other initialization before it is ready to handle global interrupts. The user application is now responsible
+ *      for enabling global interrupts before or shortly after calling \ref USB_Init() to ensure that the enumeration process
+ *      functions correctly.
+ *    - The USBInterrupt.c USB driver source file has been relocated from LUFA/Drivers/USB/HighLevel/ to LUFA/Drivers/USB/LowLevel.
+ *      Projects must update their makefile SRC values accordingly.
+ *
+ *  <b>Host Mode</b>
+ *    - The \ref USB_Init() function no longer calls sei() to enable global interrupts, as the user application may need
+ *      to perform other initialization before it is ready to handle global interrupts. The user application is now responsible
+ *      for enabling global interrupts before or shortly after calling \ref USB_Init() to ensure that the enumeration process
+ *      functions correctly.
+ *    - The USBInterrupt.c USB driver source file has been relocated from LUFA/Drivers/USB/HighLevel/ to LUFA/Drivers/USB/LowLevel.
+ *      Projects must update their makefile SRC values accordingly.
+ *
+ * \section Sec_Migration100219 Migrating from 091223 to 100219
+ *
+ *  <b>Non-USB Library Components</b>
+ *    - Due to some ADC channels not being identical to their ADC MUX selection masks for single-ended conversions on some AVR models,
+ *      the ADC driver now has explicit masks for each of the standard ADC channels (see \ref Group_ADC). These masks should be used 
+ *      when calling the ADC functions to ensure proper operation across all AVR models. Note that the \ref ADC_SetupChannel() function 
+ *      is an exception, and should always be called with a channel number rather than a channel mask.
+ *
+ *  <b>Host Mode</b>
+ *    - The MIDI Host Class driver send and receive routines now operate on packed events, where multiple MIDI events may be
+ *      packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send
+ *      pipe bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually
+ *      flush the queued event(s) to the device by calling \ref MIDI_Host_Flush().
+ *    - The Pipe_IsEndpointBound() function now takes the endpoint's direction into account, by checking if the MSB of the endpoint's address
+ *      is set to denote IN endpoints. If the previous functionality where the direction is to be discounted is required, mask the endpoint
+ *      address against the \ref PIPE_EPNUM_MASK token before calling Pipe_IsEndpointBound().
+ *
+ *  <b>Device Mode</b>
+ *    - The MIDI Device Class driver send and receive routines now operate on packed events, where multiple MIDI events may be
+ *      packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send
+ *      endpoint bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually
+ *      flush the queued event(s) to the host by calling \ref MIDI_Device_Flush().
+ *
+ * \section Sec_Migration091223 Migrating from 091122 to 091223
+ *
+ *  <b>Host Mode</b>
+ *    - The Still Image Host Class driver SI_Host_USBTask() and SI_Host_ConfigurePipes() functions were misnamed, and are
+ *      now named \ref SImage_Host_USBTask() and \ref SImage_Host_ConfigurePipes() respectively.
+ *    - The HOST_SENDCONTROL_DeviceDisconnect enum value has been renamed to \ref HOST_SENDCONTROL_DeviceDisconnected to be in
+ *      line with the rest of the library error codes.
+ *    - The HID Parser item usages no longer contain seperate minimum and maximum values, as this was a violation of the HID
+ *      specification. Instead, the values are distributed evenly across each item as its usage value, to ensure that all items
+ *      can be distinguished from oneanother.
+ *
+ *  <b>Device Mode</b>
+ *    - The CALLBACK_HID_Device_CreateHIDReport() HID Device Class driver callback now has a new ReportType parameter to
+ *      indicate the report type to generate. Existing applications may simply add and ignore this additional parameter.
+ *
+ * \section Sec_Migration091122 Migrating from 090924 to 091122
+ *  
+ *  <b>Host Mode</b>
+ *    - The HID_PARSE_UsageStackOverflow HID parser error constant is now named \ref HID_PARSE_UsageListOverflow
+ *    - The \ref CALLBACK_HIDParser_FilterHIDReportItem() HID Parser callback now passes a complete HID_ReportItem_t to the
+ *      user application, instead of just its attributes.
+ *    - The USB_GetDeviceConfigDescriptor() function was incorrectly named and is now called \ref USB_Host_GetDeviceConfigDescriptor().
+ *
+ * \section Sec_Migration090924 Migrating from 090810 to 090924
+ *
+ *  <b>Non-USB Library Components</b>
+ *    - The ADC_Off() function has been renamed to \ref ADC_ShutDown() to be consistent with the rest of the library.
+ *    - The \ref SPI_Init() routine's parameters have changed, so that the clock polarity and data sampling modes can be set. See
+ *      the \ref SPI_Init() function documentation for more details
+ *    - The \ref Dataflash_Init() routine no longer initializes the SPI bus - the SPI bus should be initialized manually via a
+ *      call to SPI_Init() before using the Dataflash driver
+ *
+ *  <b>Host Mode</b>
+ *    - The USB_GetDeviceConfigDescriptor() function's parameters and behaviour has changed; the user is required to
+ *      preallocate the largest allowable buffer, and pass the size of the buffer to the function. This allows for a single
+ *      call to the function to retrieve, size check and validate the Configuration Descriptor rather than having the user
+ *      application perform these intermediatary steps.
+ *    - The HID report parser now requires a mandatory callback in the user code, to filter only the items the application
+ *      is interested in into the processed HID report item structure to save RAM. See \ref CALLBACK_HIDParser_FilterHIDReportItem().
+ *    - The HID report parser now always parses FEATURE and always ignores constant-data items - the HID_ENABLE_FEATURE_PROCESSING
+ *      and HID_INCLUDE_CONSTANT_DATA_ITEMS compile time tokens now have no effect.
+ *    - The USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now seperate USB_Descriptor_*
+ *      and USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in
+ *      the one project. For existing projects using the standardized names, change all code to use the USB_StdDescriptor_* variants.
+ *
+ *  <b>Device Mode</b>
+ *    - The USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now seperate USB_Descriptor_*
+ *      and USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in
+ *      the one project. For existing projects using the standardized names, change all code to use the USB_StdDescriptor_* variants.
+ *
+ * \section Sec_Migration090810 Migrating from 090605 to 090810
+ *
+ *  <b>All</b>
+ *    - The "Simple Scheduler" has been <i>deprecated</i>, as it was little more than an abtracted loop and caused much confusion.
+ *      User applications using the scheduler should switch to regular loops instead. The scheduler code will be removed in a future
+ *      release.
+ *    - The "Dynamic Memory Block Allocator" has been removed, as it was unused in (and unrelated to) the LUFA library and never
+ *      used in user applications. The library is available from the author's website for those wishing to still use it in their
+ *      applications.
+ *
+ *  <b>Non-USB Library Components</b>
+ *    - The ATTR_NOINLINE function attribute macro has been renamed to ATTR_NO_INLINE to be in line with the rest of the function attribute
+ *      macro names.
+ *
+ *  <b>Library Demos</b>
+ *    - Most demos now have a corresponding Class Driver implementation, which uses the new internal library class drivers for the standard
+ *      USB classes. This allows for more rapid device and host development, and so should be used in preference to the low level APIs where
+ *      possible so that fixes to the class drivers propagate to all applications which use them automatically with each new LUFA release.
+ *
+ *  <b>Host Mode</b>
+ *    - The HIDParser.c module has moved from LUFA/Drivers/USB/Class/ to LUFA/Drivers/USB/Class/Host/.
+ *    - The USB_GetDeviceConfigDescriptor() function now requires the desired configuration index within the device as its first
+ *      parameter, to add support for multi-configuration devices. Existing code should use a configuration index of 1 to indicate the
+ *      first configuration descriptor within the device.
+ *    - The non-standard "Ready" host state has been removed. Existing \ref HOST_STATE_Configured code should be moved to the end of
+ *      the existing \ref HOST_STATE_Addressed state, and the existing HOST_STATE_Ready state code should be moved to the \ref HOST_STATE_Configured
+ *      state.
+ *    - The USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_HostState explicitly to ensure the host is
+ *      in the desired state instead.
+ *    - The USB event names have been changed and their firing conditions changed to properly seperate out Host mode events from Device mode
+ *      events. See the \ref Group_Events page for details on the new event names and firing conditions.
+ *
+ *  <b>Device Mode</b>
+ *    - The \ref CALLBACK_USB_GetDescriptor() function now takes an extra parameter to specify the descriptor's memory space so that
+ *      descriptors in mixed memory spaces can be used. The previous functionality can be returned by defining the USE_FLASH_DESCRIPTORS
+ *      token in the project makefile to fix all descriptors into FLASH space and remove the extra function parameter.
+ *    - The USB_IsSuspended global has been removed - test \ref USB_DeviceState against \ref DEVICE_STATE_Suspended instead.
+ *    - The USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_DeviceState explicitly to ensure the device
+ *      is in the desired state instead.
+ *    - The VBUS events have been removed, as they are already exposed to the user via the USB_Connect and USB_Disconnect events.
+ *    - The USB event names have been changed and their firing conditions changed to properly seperate out Host mode events from Device mode
+ *      events. See the \ref Group_Events page for details on the new event names and firing conditions. *
+ *
+ * \section Sec_Migration090605 Migrating from 090510 to 090605
+ *
+ *  <b>Device Mode</b>
+ *    - Support for non-control data endpoint interrupts has been dropped due to many issues in the implementation. All existing
+ *      projects using interrupts on non-control endpoints should switch to polling. For control interrupts, the library can
+ *      manage the control endpoint via interrupts automatically by compiling with the INTERRUPT_CONTROL_ENDPOINT token defined.
+ *    - The DESCRIPTOR_ADDRESS() macro has been removed. User applications should use normal casts to obtain a descriptor's memory
+ *      address.
+ *    - The library events system has been rewritten, so that all macros have been removed to allow for clearer user code. See
+ *      \ref Group_Events for new API details.
+ *    - The STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular
+ *      function signatures of a function accepting no arguments and returning a uint8_t value.
+ *    - The Event_DeviceError() event no longer exists, as its sole caller (unlinked USB_GetDescriptor() function) now produces a
+ *      compilation error rather than a runtime error. The StdDescriptors.c file no longer exists as a result, and should be removed
+ *      from project makefiles.
+ *    - The USB_GetDescriptor() function has been renamed to CALLBACK_USB_GetDescriptor() to be in line with the new CALLBACK_ function
+ *      prefixes for functions which *must* be implemented in the user application.
+ *
+ *  <b>Host Mode</b>
+ *    - Support for non-control data pipe interrupts has been dropped due to many issues in the implementation. All existing
+ *      projects using interrupts on non-control pipes should switch to polling.
+ *    - The library events system has been rewritten, so that all macros have been removed to allow for clearer user code. See
+ *      \ref Group_Events for new API details.
+ *    - The STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular
+ *      function signatures of a function accepting no arguments and returning a uint8_t value.
+ *    - The DESCRIPTOR_COMPARATOR() macro has been removed. User applications should replace all instances of the macro with
+ *      regular function signatures of a function accepting a void pointer to the descriptor to test, and returning a uint8_t value.
+ *
+ *
+ * \section Sec_Migration090510 Migrating from 090401 to 090510
+ *
+ *  <b>All</b>
+ *    - The ButtLoadTag.h header has been removed, as it was never used for its intended purpose. Projects should either remove all
+ *      BUTTLOADTAG elements, or download and extract ButtLoadTag.h header from the ButtLoad project.
+ *    - The Drivers/AT90USBXXX directory has been renamed to Drivers/Peripheral.
+ *    - The Serial_Stream driver has been renamed to SerialStream to remain consistent with the rest of the library naming scheme.
+ *    - The HWB driver has changed to the Buttons driver. See the board Buttons driver documentation for the new API.
+ *
+ *  <b>Dual Role Mode</b>
+ *    - The USB_PowerOnFail even has been renamed to USB_InitFailure.
+ *    - The functions in OTG.h have been renamed to remain more consistent with the library API. See the functions in OTG.h for more
+ *      details.
+ *
+ *  <b>Library Demos</b>
+ *    - Most demos, bootloaders and applications have had significant changes from previous versions. Applications built off of any
+ *      library demos should update to the latest versions.
+ *
+ *  <b>Device Mode</b>
+ *    - The Endpoint_ClearCurrentBank() macro has been removed, and is now replaced with the Endpoint_ClearIN(), Endpoint_ClearOUT() 
+ *      macros. See Endpoint.h documentation for more details on the new endpoint management macros.
+ *    - The Endpoint_ReadWriteAllowed() macro has been renamed to Endpoint_IsReadWriteAllowed() to be more consistent with the rest of
+ *      the API naming scheme.
+ *    - The Endpoint_IsSetupINReady() and Endpoint_IsSetupOutReceived() macros have been renamed to Endpoint_IsINReady() and
+ *      Endpoint_IsOUTReceived() respectively.
+ *    - The Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived().
+ *    - The Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearSETUP().
+ *    - All endpoint read/write/discard aliases which did not have an explicitly endianness specifier (such as Endpoint_Read_Word()) have
+ *      been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions.
+ *    - The USB_UnhandledControlPacket event no longer has any parameters. User code should no longer attempt to read in the remainder of
+ *      the Control Request header as all Control Request header data is now preloaded by the library and made available in the
+ *      USB_ControlRequest structure.
+ *    - The FEATURELESS_CONTROL_ONLY_DEVICE token has been renamed to CONTROL_ONLY_DEVICE.
+ *    - The STATIC_ENDPOINT_CONFIGURATION is no longer applicable as the library will apply this optimization when appropriate automatically.
+ *    - The values of the Endpoint_Stream_RW_ErrorCodes_t and Endpoint_ControlStream_RW_ErrorCodes_t enums have had the "ERROR_" portion
+ *      of their names removed.
+ *
+ *  <b>Host Mode</b>
+ *    - The USB_Host_SendControlRequest() function no longer automatically selects the Control pipe (pipe 0) to allow it to be used on
+ *      other control type pipes. Care should be taken to ensure that the Control pipe is always selected before the function is called
+ *      in existing projects where the Control pipe is to be operated on.
+ *    - The USB Host management task now saves and restores the currently selected pipe before and after the task runs. Projects no longer
+ *      need to manage this manually when calling the USB management task.
+ *    - The Pipe_ClearCurrentBank() macro has been removed, and is now replaced with the Pipe_ClearIN(), Pipe_ClearOUT() macros. See
+ *      Pipe.h documentation for more details on the new pipe management macros.
+ *    - The Pipe_ReadWriteAllowed() macro has been renamed to Pipe_IsReadWriteAllowed() to be more consistent with the rest of the API
+ *      naming scheme.
+ *    - The Pipe_IsSetupINReceived() and Pipe_IsOutReady() macros have been renamed to Pipe_IsINReceived() and Pipe_IsOUTReady()
+ *      respectively.
+ *    - The new Pipe_ClearSETUP() macro should be used to send SETUP transactions, rather than the previous Pipe_ClearSetupOUT() macro.
+ *    - The Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent().
+ *    - The Pipe_ClearSetupSent() macro is no longer applicable and should be removed.
+ *    - All pipe read/write/discard aliases which did not have an explicitly endianness specifier (such as Pipe_Read_Word()) have
+ *      been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions.
+ *    - The Host_IsResetBusDone() macro has been renamed to Host_IsBusResetComplete().
+ *    - The Pipe_Ignore_Word() and Pipe_Ignore_DWord() functions have been renamed to Pipe_Discard_Word() and Pipe_Discard_DWord() to remain
+ *      consistent with the rest of the pipe API.
+ *    - It is no longer needed to manually include the headers from LUFA/Drivers/USB/Class, as they are now included along with the rest
+ *      of the USB headers when LUFA/Drivers/USB/USB.h is included.
+ *    - Functions in the ConfigDescriptor.h header file no longer have "Host_" as part of their names.
+ *    - The ProcessHIDReport() has been renamed to USB_ProcessHIDReport(), GetReportItemInfo() has been renamed to USB_GetHIDReportItemInfo()
+ *      and SetReportItemInfo() has been renamed to USB_GetHIDReportItemInfo().
+ *    - The values of the DSearch_Return_ErrorCodes_t and DSearch_Comp_Return_ErrorCodes_t enums have had their respective "Descriptor_Search"
+ *      and "Descriptor_Search_Comp" prefixes changed to all caps.
+ *    - The USB_HostRequest global has been renamed to USB_ControlRequest, and is used in Device mode also. The USB_Host_Request_Header_t
+ *      structure type has been renamed to USB_Request_Header_t.
+ *    - The values of the Pipe_Stream_RW_ErrorCodes_t enum have had the "ERROR_" portion of their names removed.
+ *
+ *
+ * \section Sec_Migration090401 Migrating from 090209 to 090401
+ *
+ *  <b>All</b>
+ *    - LUFA projects must now give the raw input clock frequency (before any prescaling) as a compile time constant "F_CLOCK",
+ *      defined in the project makefile and passed to the compiler via the -D switch.
+ *    - The makefile EEPROM programming targets for FLIP and dfu-programmer no longer program in the FLASH data in addition to the
+ *      EEPROM data into the device. If both are to be programmed, both the EEPROM and FLASH programming targets must be called.
+ *    - As the avr-libc macro has been corrected in recent avr-libc distributions, the SetSystemClockPrescaler() macro has been removed.
+ *      Include <avr/power.h> and call clock_prescale_set(clock_div_1); instead on recent avr-libc distributions.
+ *
+ *  <b>Library Demos</b>
+ *    - The USBtoSerial demo now discards all data when not connected to a host, rather than buffering it for later transmission.
+ *    - Most demos, bootloaders and applications have had their control request handling code corrected, to properly send the status
+ *      stage in all handled requests. If you are using code based off one of the library demos, bootloaders or applications, you should
+ *      update to the latest revisions.
+ *
+ *  <b>Non-USB Library Components</b>
+ *    - The ATTR_ALWAYSINLINE function attribute macro has been renamed to ATTR_ALWAYS_INLINE.
+ *    - Custom board Dataflash drivers now require the implementation of Dataflash_SelectChipFromPage() and Dataflash_SendAddressBytes().
+ *
+ *  <b>Device Mode</b>
+ *    - The NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded
+ *      to also remove parts of the Get Status chapter 9 request to further reduce code usage. On all applications currently using the 
+ *      NO_CLEARSET_FEATURE_REQUEST compile time token, it can be replaced with the FEATURELESS_CONTROL_ONLY_DEVICE token with no further
+ *      modifications required.
+ *
+ *
+ * \section Sec_Migration090209 Migrating from 081217 to 090209
+ *
+ *  <b>Device Mode</b>
+ *    - The ENDPOINT_MAX_ENDPOINTS constant has been renamed to the more appropriate name of ENDPOINT_TOTAL_ENDPOINTS.
+ *    - The USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user
+ *      makefile if desired to restore the previous 50ms timeout.
+ *
+ *  <b>Host Mode</b>
+ *    - The PIPE_MAX_ENDPOINTS constant has been renamed to the more appropriate name of PIPE_TOTAL_ENDPOINTS.
+ *    - The USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user
+ *      makefile if desired to restore the previous 50ms timeout.
+ *    - The USB_DeviceEnumerationFailed event now contains a second "SubErrorCode" parameter, giving the error code of the function
+ *      which failed.
+ *    - The HID_PARSE_Sucessful enum member constant has been corrected to HID_PARSE_Successful.
+ *
+ *  <b>Non-USB Library Components</b>
+ *    - The previous SPI_SendByte() functionality is now located in SPI_TransferByte(). SPI_SendByte() now discards the return byte
+ *      for speed, to compliment the new SPI_ReceiveByte() function. If two-way SPI transfers are required, calls to SPI_SendByte()
+ *      should be changed to SPI_TransferByte().
+ *    - The serial driver now sets the Tx line as an output explicitly, and enables the pullup of the Rx line.
+ *    - The Serial_Init() and SerialStream_Init() functions now take a second DoubleSpeed parameter, which indicates if the USART
+ *      should be initialized in double speed mode - useful in some circumstances for attaining baud rates not usually possible at
+ *      the given AVR clock speed.
+ *
+ *  <b>Library Demos</b>
+ *    - Most library demos have been enhanced and/or had errors corrected. All users of all demos should upgrade their codebase to
+ *      the latest demo versions.
+ *
+ *
+ * \section Sec_Migration171208 Migrating from V1.5.3 to 081217
+ *
+ *  <b>All</b>
+ *    - The MyUSB project name has been changed to LUFA (Lightweight Framework for USB AVRs). All references to MyUSB, including macro names,
+ *      have been changed to LUFA.
+ *
+ *  <b>Library Demos</b>
+ *    - The ReconfigureUSART() routine in the USBtoSerial demo was not being called after new line encoding
+ *      parameters were set by the host. Projects built on the USBtoSerial code should update to the latest version.
+ *    - The HID Parser now supports multiple report (on a single endpoint) HID devices. The MouseHostWithParser and
+ *      KeyboardHostWithPaser demos use the updated API functions to function correctly on such devices. Projects
+ *      built on either "WithParser" demo should update to the latest code.
+ *    - The RNDIS demo TCP stack has been modified so that connections can be properly closed. It is still not
+ *      recommended that the MyUSB RNDIS demo TCP/IP stack be used for anything other than demonstration purposes,
+ *      as it is neither a full nor a standards compliant implementation.
+ *
+ *  <b>Non-USB Library Components</b>
+ *    - The Serial_IsCharReceived() macro has been changed to the correct spelling of Serial_IsCharReceived() in Serial.h.
+ *
+ *  <b>Device Mode</b>
+ *    - The MANUAL_PLL_CONTROL compile time token has been removed, and replaced with a USB_OPT_MANUAL_PLL mask
+ *      to be used in the Options parameter of the USB_Init() function.
+ *    - Calling USB_Init() now forces a complete USB interface reset and enumeration, even if the USB interface is
+ *      currently initialized.
+ *    - Interrupts are now disabled when processing control requests, to avoid problems with interrupts causing the library
+ *      or user request processing code to exceed the strict USB timing requirements on control transfers.
+ *    - The USB Reset event now resets and disables all device endpoints. If user code depends on endpoints remaining configured
+ *      after a Reset event, it should be altered to explicitly re-initialize all user endpoints.
+ *    - The prototype for the GetDescriptor function has been changed, as the return value was redundant. The function now
+ *      returns the size of the descriptor, rather than passing it back via a parameter, or returns NO_DESCRIPTOR if the specified
+ *      descriptor does not exist.
+ *    - The NO_DESCRIPTOR_STRING macro has been renamed NO_DESCRIPTOR, and is now also used as a possible return value for the
+ *      GetDescriptor function.
+ *
+ *  <b>Host Mode</b>
+ *    - The MANUAL_PLL_CONTROL compile time token has been removed, and replaced with a USB_OPT_MANUAL_PLL mask
+ *      to be used in the Options parameter of the USB_Init() function.
+ *    - The HID report parser now supports multiple Report IDs. The HID report parser GetReportItemInfo() and
+ *      SetReportItemInfo() routines now return a boolean, set if the requested report item was located in the
+ *      current report. If sending a report to a multi-report device, the first byte of the report is automatically
+ *      set to the report ID of the given report item.
+ *    - Calling USB_Init() now forces a complete USB interface reset and enumeration, even if the USB interface is
+ *      currently initialized.
+ *
+ *
+ * \section Sec_Migration152 Migrating from V1.5.2 to V1.5.3
+ *
+ *  <b>Library Demos</b>
+ *    - Previously, all demos contained a serial number string descriptor, filled with all zeros. A serial number
+ *      string is required in Mass Storage devices, or devices which are to retain settings when moved between
+ *      ports on a machine. As people were not changing the serial number value, this was causing conflicts and so
+ *      the serial number descriptor has been removed from all but the Mass Storage demo, which requires it.
+ *    - The AudioOut and AudioIn demos did not previously silence their endpoints when the host has deactivated
+ *      them. Projects built upon either demo should upgrade to the latest code.
+ *    - The FEATURE_ENDPOINT macro has been renamed FEATURE_ENDPOINT_HALT, and is now correctly documented.
+ *    - The MassStoreHost demo contained errors which caused it to lock up randomly on certain devices. Projects built
+ *      on the MassStoreDemo code should update to the latest version.
+ *    - The Interrupt type endpoint in the CDC based demos previously had a polling interval of 0x02, which caused
+ *      problems on some Linux systems. This has been changed to 0xFF, projects built on the CDC demos should upgrade
+ *      to the latest code.
+ *    - The HID keyboard and mouse demos were not previously boot mode compatible. To enable boot mode support, projects
+ *      built on the keyboard or mouse demos (or derivatives) should upgrade to the latest code.
+ *    - The Mass Storage demo was not previously standards compliant. Projects built on the Mass Storage demo should
+ *      upgrade to the latest code.
+ *    - The USART was not being reconfigured after the host sent new encoding settings in the USBtoSerial demo. This was
+ *      previously discovered and fixed, but the change was lost. Projects built on the USBtoSerial demo should update
+ *      to the latest code.
+ *
+ *  <b>Device Mode</b>
+ *    - The endpoint non-control stream functions now have a default timeout of 50ms between packets in the stream.
+ *      If this timeout is exceeded, the function returns the new ENDPOINT_RWSTREAM_ERROR_Timeout error value. The
+ *      timeout value can be overridden by defining the USB_STREAM_TIMEOUT_MS in the project makefile to the desired
+ *      timeout duration in ms.
+ *    - Rather than returning fixed values, the flags indicating if the device has Remote Wakeup currently enabled
+ *      and/or is self-powered are now accessed and set through the new USB_RemoteWakeupEnabled and
+ *      USB_CurrentlySelfPowered macros. See the DevChapter9.h documentation for more details.
+ *    - All endpoint stream functions now require an extra Callback function parameter. Existing code may be updated
+ *      to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing
+ *      the token NO_STREAM_CALLBACKS to the compiler using the -D switch.
+ *
+ *  <b>Host Mode</b>
+ *    - The pipe non-control stream functions now have a default timeout of 50ms between packets in the stream.
+ *      If this timeout is exceeded, the function returns the new PIPE_RWSTREAM_ERROR_Timeout error value. The
+ *      timeout value can be overridden by defining the USB_STREAM_TIMEOUT_MS in the project makefile to the desired
+ *      timeout duration in ms.
+ *    - CollectionPath_t has been renamed to HID_CollectionPath_t to be more in line with the other HID parser structures.
+ *    - All pipe stream functions now require an extra Callback function parameter. Existing code may be updated
+ *      to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing
+ *      the token NO_STREAM_CALLBACKS to the compiler using the -D switch.
+ *
+ *
+ * \section Sec_Migration151 Migrating from V1.5.1 to V1.5.2
+ *
+ *  <b>Library Demos</b>
+ *    - The RNDIS demo application has been updated so that it is functional on Linux under earlier implementations
+ *      of the RNDIS specification, which had non-standard behaviour. Projects built upon the demo should upgrade
+ *      to the latest code.
+ *    - The DFU class bootloader has had several bugs corrected in this release. It is recommended that where
+ *      possible any existing devices upgrade to the latest bootloader code.
+ *
+ *
+ * \section Sec_Migration150 Migrating from V1.5.0 to V1.5.1
+ *
+ *  <b>Library Demos</b>
+ *    - The USBtoSerial demo was broken in the 1.5.0 release, due to incorrect register polling in place of the
+ *      global "Transmitting" flag. The change has been reverted in this release. Projects built upon the demo
+ *      should upgrade to the latest code.
+ *    - The HID class demos did not implement the mandatory GetReport HID class request. Projects built upon the HID
+ *      demos should upgrade to the latest code.
+ *    - The HID class demos incorrectly reported themselves as boot-protocol enabled HID devices in their descriptors.
+ *      Projects built upon the HID demos should upgrade to the latest code.
+ *    - The MIDI device demo had incorrect AudioStreaming interface descriptors. Projects built upon the MIDI demo
+ *      should upgrade to the latest code.
+ *    - The AudioOut demo did not correctly tristate the speaker pins when USB was disconnected, wasting power.
+ *      Projects built upon the AudioOut demo should upgrade to the latest code.
+ *
+ *
+ * \section Sec_Migration141 Migrating from V1.4.1 to V1.5.0
+ *
+ *  <b>Library Demos</b>
+ *    - Previous versions of the library demos had incorrectly encoded BCD version numbers in the descriptors. To
+ *      avoid such mistakes in the future, the VERSION_BCD macro has been added to StdDescriptors.h. Existing
+ *      projects should at least manually correct the BCD version numbers, or preferably update the descriptors to
+ *      encode the version number in BCD format using the new macro.
+ *    - The mandatory GetReport class-specific request was accidentally omitted from previous versions of the demos
+ *      based on the Human Interface Device (HID) class. This has been corrected, and any user projects based on the
+ *      HID demos should also be updated accordingly.
+ *    - The CDC demos now correctly send an empty packet directly after a full packet, to end the transmission.
+ *      Failure to do this on projects which always or frequently send full packets will cause buffering issues on
+ *      the host OS. All CDC user projects are advised to update their transmission routines in the same manner as
+ *      the library CDC demos.
+ *    - The previous interrupt-driven Endpoint/Pipe demos did not properly save and restore the currently selected
+ *      Endpoint/Pipe when the ISR fired. This has been corrected - user projects based on the interrupt driven
+ *      demos should also update to properly save and restore the selected Endpoint/Pipe.
+ *
+ *  <b>Non-USB Library Components</b>
+ *    - The Atomic.h and ISRMacro.h header files in MyUSB/Common have been removed, as the library is now only
+ *      compatible with avr-libc library versions newer than the time before the functionality of the deleted
+ *      headers was available.
+ *
+ *  <b>Device Mode</b>
+ *    - The GetDescriptor function (see StdDescriptors.h) now has a new prototype, with altered parameter names and
+ *      functions. Existing projects will need to update the GetDescriptor implementation to reflect the new API.
+ *      The previously split Type and Index parameters are now passed as the original wValue parameter to the
+ *      function, to make way for the USB specification wIndex parameter which is <i>not</i> the same as the
+ *      previous Index parameter.
+ *    - The USB_UnhandledControlPacket event (see Events.h) now has new parameter names, to be in line with the
+ *      official USB specification. Existing code will need to be altered to use the new parameter names.
+ *    - The USB_CreateEndpoints event (see Events.h) has been renamed to USB_ConfigurationChanged, which is more
+ *      appropriate. It fires in an identical manner to the previously named event, thus the only change to be made
+ *      is the event name itself in the user project.
+ *    - The USB_Descriptor_Language_t structure no longer exists in StdDescriptors.h, as this was a
+ *      pseudo-descriptor modelled on the string descriptor. It is replaced by the true USB_Descriptor_String_t type
+ *      descriptor as indicated in the USB specification, thus all device code must be updated accordingly.
+ *    - The names of several Endpoint macros have been changed to be more consistent with the rest of the library,
+ *      with no implementation changes. This means that existing code can be altered to use the new macro names
+ *      with no other considerations required. See Endpoint.h for the new macro names.
+ *    - The previous version of the MassStorage demo had an incorrect value in the SCSI_Request_Sense_Response_t
+ *      structure named SenseData in SCSI.c which caused some problems with some hosts. User projects based on this
+ *      demo should correct the structure value to maintain compatibility across multiple OS platforms.
+ *    - By default, the descriptor structures use the official USB specification names for the elements. Previous
+ *      versions of the library used non-standard (but more verbose) names, which are still usable in the current
+ *      and future releases when the correct compile time option is enabled. See the StdDescriptors.h file
+ *      documentation for more details.
+ *
+ *  <b>Host Mode</b>
+ *    - The USB_Host_Request_Header_t structure in HostChapter9.h (used for issuing control requests) has had its
+ *      members renamed to the official USB specification names for requests. Existing code will need to be updated
+ *      to use the new names.
+ *    - The names of several Pipe macros have been changed to be more consistent with the rest of the library,
+ *      with no implementation changes. This means that existing code can be altered to use the new macro names
+ *      with no other considerations required. See Pipe.h for the new macro names.
+ *    - By default, the descriptor structures use the official USB specification names for the elements. Previous
+ *      versions of the library used non-standard (but more verbose) names, which are still usable in the current
+ *      and future releases when the correct compile time option is enabled. See the StdDescriptors.h file
+ *      documentation for more details.
+ *    - The names of the macros in Host.h for controlling the SOF generation have been renamed, see the Host.h
+ *      module documentation for the new macro names.
+ *
+ *  <b>Dual Role Mode</b>
+ *    - The OTG.h header file has been corrected so that the macros now perform their stated functions. Any existing
+ *      projects using custom headers to fix the broken OTG header should now be altered to once again use the OTG
+ *      header inside the library.
+ *    - The USB_DeviceEnumerationComplete event (see Events.h) now also fires in Device mode, when the host has
+ *      finished enumerating the device. Projects relying on the event only firing in Host mode should be updated
+ *      so that the event action only occurs when the USB_Mode global is set to USB_MODE_HOST.
+ */
diff --git a/LUFA/ManPages/ProgrammingApps.txt b/LUFA/ManPages/ProgrammingApps.txt
index 4302170ec..4f3107502 100644
--- a/LUFA/ManPages/ProgrammingApps.txt
+++ b/LUFA/ManPages/ProgrammingApps.txt
@@ -1,27 +1,27 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

- 

-/** \page Page_ProgrammingApps Programming an Application into a USB AVR

- *

- *  Once you have built an application, you will need a way to program in the resulting ".HEX" file (and, if your

- *  application uses EEPROM variables with initial values, also a ".EEP" file) into your USB AVR. Normally, the

- *  reprogramming of an AVR device must be performed using a special piece of programming hardware, through one of the

- *  supported AVR programming protocols - ISP, HVSP, HVPP, JTAG or dW. This can be done through a custom programmer,

- *  a third party programmer, or an official Atmel AVR tool - for more information, see the Atmel.com website.

- *

- *  Alternatively, you can use the bootloader. From the Atmel factory, each USB AVR comes preloaded with the Atmel

- *  DFU (Device Firmware Update) class bootloader, a small piece of AVR firmware which allows the remainder of the

- *  AVR to be programmed through a non-standard interface such as the serial USART port, SPI, or (in this case) USB.

- *  Bootloaders have the advantage of not requiring any special hardware for programming, and cannot usually be erased

- *  or broken without an external programming device. They have disadvantages however; they cannot change the fuses of

- *  the AVR (special configuration settings that control the operation of the chip itself) and a small portion of the

- *  AVR's FLASH program memory must be reserved to contain the bootloader firmware, and thus cannot be used by the

- *  loaded application. Atmel's DFU bootloader is either 4KB (for the smaller USB AVRs) or 8KB (for the larger USB AVRs).

- *

- *  If you wish to use the DFU bootloader to program in your application, refer to your DFU programmer's documentation.

- *  Atmel provides a free utility called FLIP which is USB AVR compatible, and an open source (Linux compatible)

- *  alternative exists called "dfu-programmer".

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+ 
+/** \page Page_ProgrammingApps Programming an Application into a USB AVR
+ *
+ *  Once you have built an application, you will need a way to program in the resulting ".HEX" file (and, if your
+ *  application uses EEPROM variables with initial values, also a ".EEP" file) into your USB AVR. Normally, the
+ *  reprogramming of an AVR device must be performed using a special piece of programming hardware, through one of the
+ *  supported AVR programming protocols - ISP, HVSP, HVPP, JTAG or dW. This can be done through a custom programmer,
+ *  a third party programmer, or an official Atmel AVR tool - for more information, see the Atmel.com website.
+ *
+ *  Alternatively, you can use the bootloader. From the Atmel factory, each USB AVR comes preloaded with the Atmel
+ *  DFU (Device Firmware Update) class bootloader, a small piece of AVR firmware which allows the remainder of the
+ *  AVR to be programmed through a non-standard interface such as the serial USART port, SPI, or (in this case) USB.
+ *  Bootloaders have the advantage of not requiring any special hardware for programming, and cannot usually be erased
+ *  or broken without an external programming device. They have disadvantages however; they cannot change the fuses of
+ *  the AVR (special configuration settings that control the operation of the chip itself) and a small portion of the
+ *  AVR's FLASH program memory must be reserved to contain the bootloader firmware, and thus cannot be used by the
+ *  loaded application. Atmel's DFU bootloader is either 4KB (for the smaller USB AVRs) or 8KB (for the larger USB AVRs).
+ *
+ *  If you wish to use the DFU bootloader to program in your application, refer to your DFU programmer's documentation.
+ *  Atmel provides a free utility called FLIP which is USB AVR compatible, and an open source (Linux compatible)
+ *  alternative exists called "dfu-programmer".
  */
\ No newline at end of file
diff --git a/LUFA/ManPages/SchedulerOverview.txt b/LUFA/ManPages/SchedulerOverview.txt
index 3aa151750..b59821fe0 100644
--- a/LUFA/ManPages/SchedulerOverview.txt
+++ b/LUFA/ManPages/SchedulerOverview.txt
@@ -1,35 +1,35 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \page Page_SchedulerOverview LUFA Scheduler Overview

- *

- *  <B>THE LUFA SCHEDULER IS NOW DEPRECATED AND WILL BE REMOVED IN A FUTURE RELEASE. EXISTING CODE SHOULD CONVERT

- *     TO STANDARD LOOPS AS SHOWN IN THE CURRENT LIBRARY DEMOS.</b>

- *

- *

- *  The LUFA library comes with a small, basic round-robbin scheduler which allows for small "tasks" to be executed

- *  continuously in sequence, and enabled/disabled at runtime. Unlike a conventional, complex RTOS scheduler, the

- *  LUFA scheduler is very simple in design and operation and is essentially a loop conditionally executing a series

- *  of functions.

- *

- *  Each LUFA scheduler task should be written similar to an ISR; it should execute quickly (so that no one task

- *  hogs the processor, preventing another from running before some sort of timeout is exceeded). Unlike normal RTOS

- *  tasks, each LUFA scheduler task is a regular function, and thus must be designed to be called, and designed to

- *  return to the calling scheduler function repeatedly. Data which must be preserved between task calls should be

- *  declared as global or (preferably) as a static local variable inside the task.

- *

- *  The scheduler consists of a task list, listing all the tasks which can be executed by the scheduler. Once started,

- *  each task is then called one after another, unless the task is stopped by another running task or interrupt.

- *

- *

- *  If desired, the LUFA scheduler <b>does not need to be used</b> in a LUFA powered application. A more conventional

- *  approach to application design can be used, or a proper scheduling RTOS inserted in the place of the LUFA scheduler.

- *  In the case of the former the USB task must be run manually repeatedly to maintain USB communications, and in the

- *  case of the latter a proper RTOS task must be set up to do the same.

- *

- *

- *  For more information on the LUFA scheduler, see the Scheduler.h file documentation.

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \page Page_SchedulerOverview LUFA Scheduler Overview
+ *
+ *  <B>THE LUFA SCHEDULER IS NOW DEPRECATED AND WILL BE REMOVED IN A FUTURE RELEASE. EXISTING CODE SHOULD CONVERT
+ *     TO STANDARD LOOPS AS SHOWN IN THE CURRENT LIBRARY DEMOS.</b>
+ *
+ *
+ *  The LUFA library comes with a small, basic round-robbin scheduler which allows for small "tasks" to be executed
+ *  continuously in sequence, and enabled/disabled at runtime. Unlike a conventional, complex RTOS scheduler, the
+ *  LUFA scheduler is very simple in design and operation and is essentially a loop conditionally executing a series
+ *  of functions.
+ *
+ *  Each LUFA scheduler task should be written similar to an ISR; it should execute quickly (so that no one task
+ *  hogs the processor, preventing another from running before some sort of timeout is exceeded). Unlike normal RTOS
+ *  tasks, each LUFA scheduler task is a regular function, and thus must be designed to be called, and designed to
+ *  return to the calling scheduler function repeatedly. Data which must be preserved between task calls should be
+ *  declared as global or (preferably) as a static local variable inside the task.
+ *
+ *  The scheduler consists of a task list, listing all the tasks which can be executed by the scheduler. Once started,
+ *  each task is then called one after another, unless the task is stopped by another running task or interrupt.
+ *
+ *
+ *  If desired, the LUFA scheduler <b>does not need to be used</b> in a LUFA powered application. A more conventional
+ *  approach to application design can be used, or a proper scheduling RTOS inserted in the place of the LUFA scheduler.
+ *  In the case of the former the USB task must be run manually repeatedly to maintain USB communications, and in the
+ *  case of the latter a proper RTOS task must be set up to do the same.
+ *
+ *
+ *  For more information on the LUFA scheduler, see the Scheduler.h file documentation.
+ */
diff --git a/LUFA/ManPages/SoftwareBootloaderJump.txt b/LUFA/ManPages/SoftwareBootloaderJump.txt
index 3f6e30582..1b284e4cd 100644
--- a/LUFA/ManPages/SoftwareBootloaderJump.txt
+++ b/LUFA/ManPages/SoftwareBootloaderJump.txt
@@ -1,63 +1,63 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/**

- *  \page Page_SoftwareBootloaderStart Entering the Bootloader via Software

- *

- *  A common requirement of many applications is the ability to jump to the programmed bootloader of a chip

- *  on demand, via the code's firmware (i.e. not as a result of any physical user interaction with the

- *  hardware). This might be required because the device does not have any physical user input, or simply

- *  just to streamline the device upgrade process on the host PC.

- *

- *  The following C code snippet may be used to enter the bootloader upon request by the user application.

- *  By using the watchdog to physically reset the controller, it is ensured that all system hardware is

- *  completely reset to their defaults before the bootloader is run. This is important; since bootloaders

- *  are written to occupy a very limited space, they usually make assumptions about the register states based

- *  on the default values after a hard-reset of the chip.

- *

- *  \code

- *  #include <avr/wdt.h>

- *  #include <avr/io.h>

- *  #include <util/delay.h>

- *

- *  #include <LUFA/Common/Common.h>

- *  #include <LUFA/Drivers/USB/USB.h>

- *

- *  uint32_t Boot_Key ATTR_NO_INIT;

- *

- *  #define MAGIC_BOOT_KEY            0xDC42ACCA

- *  #define BOOTLOADER_START_ADDRESS  ({FLASH_SIZE_BYTES} - {BOOTLOADER_SEC_SIZE_BYTES})

- *  

- *  void Bootloader_Jump_Check(void) ATTR_INIT_SECTION(3);

- *  void Bootloader_Jump_Check(void)

- *  {

- *      // If the reset source was the bootloader and the key is correct, clear it and jump to the bootloader

- *      if ((MCUSR & (1<<WDRF)) && (Boot_Key == MAGIC_BOOT_KEY))

- *      {

- *          Boot_Key = 0;

- *          ((void (*)(void))BOOTLOADER_START_ADDRESS)(); 

- *      }

- *  }

- *

- *  void Jump_To_Bootloader(void)

- *  {

- *      // If USB is used, detatch from the bus and wait 2 seconds for the host to register it

- *      USB_ShutDown();

- *      for (uint8_t i = 0; i < 128; i++)

- *        _delay_ms(16);

- *

- *      // Set the bootloader key to the magic value and force a reset

- *      Boot_Key = MAGIC_BOOT_KEY;

- *      wdt_enable(WDTO_250MS);

- *      for (;;); 

- *  }

- *  \endcode

- *

- *  Note that the bootloader magic key can be any arbitrary value. The {FLASH_SIZE_BYTES} and

- *  {BOOTLOADER_SEC_SIZE_BYTES} tokens should be replaced with the total flash size of the AVR

- *  in bytes, and the allocated size of the bootloader section for the target AVR.

- * 

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/**
+ *  \page Page_SoftwareBootloaderStart Entering the Bootloader via Software
+ *
+ *  A common requirement of many applications is the ability to jump to the programmed bootloader of a chip
+ *  on demand, via the code's firmware (i.e. not as a result of any physical user interaction with the
+ *  hardware). This might be required because the device does not have any physical user input, or simply
+ *  just to streamline the device upgrade process on the host PC.
+ *
+ *  The following C code snippet may be used to enter the bootloader upon request by the user application.
+ *  By using the watchdog to physically reset the controller, it is ensured that all system hardware is
+ *  completely reset to their defaults before the bootloader is run. This is important; since bootloaders
+ *  are written to occupy a very limited space, they usually make assumptions about the register states based
+ *  on the default values after a hard-reset of the chip.
+ *
+ *  \code
+ *  #include <avr/wdt.h>
+ *  #include <avr/io.h>
+ *  #include <util/delay.h>
+ *
+ *  #include <LUFA/Common/Common.h>
+ *  #include <LUFA/Drivers/USB/USB.h>
+ *
+ *  uint32_t Boot_Key ATTR_NO_INIT;
+ *
+ *  #define MAGIC_BOOT_KEY            0xDC42ACCA
+ *  #define BOOTLOADER_START_ADDRESS  ({FLASH_SIZE_BYTES} - {BOOTLOADER_SEC_SIZE_BYTES})
+ *  
+ *  void Bootloader_Jump_Check(void) ATTR_INIT_SECTION(3);
+ *  void Bootloader_Jump_Check(void)
+ *  {
+ *      // If the reset source was the bootloader and the key is correct, clear it and jump to the bootloader
+ *      if ((MCUSR & (1<<WDRF)) && (Boot_Key == MAGIC_BOOT_KEY))
+ *      {
+ *          Boot_Key = 0;
+ *          ((void (*)(void))BOOTLOADER_START_ADDRESS)(); 
+ *      }
+ *  }
+ *
+ *  void Jump_To_Bootloader(void)
+ *  {
+ *      // If USB is used, detatch from the bus and wait 2 seconds for the host to register it
+ *      USB_ShutDown();
+ *      for (uint8_t i = 0; i < 128; i++)
+ *        _delay_ms(16);
+ *
+ *      // Set the bootloader key to the magic value and force a reset
+ *      Boot_Key = MAGIC_BOOT_KEY;
+ *      wdt_enable(WDTO_250MS);
+ *      for (;;); 
+ *  }
+ *  \endcode
+ *
+ *  Note that the bootloader magic key can be any arbitrary value. The {FLASH_SIZE_BYTES} and
+ *  {BOOTLOADER_SEC_SIZE_BYTES} tokens should be replaced with the total flash size of the AVR
+ *  in bytes, and the allocated size of the bootloader section for the target AVR.
+ * 
  */
\ No newline at end of file
diff --git a/LUFA/ManPages/VIDAndPIDValues.txt b/LUFA/ManPages/VIDAndPIDValues.txt
index b5c187489..fb936600d 100644
--- a/LUFA/ManPages/VIDAndPIDValues.txt
+++ b/LUFA/ManPages/VIDAndPIDValues.txt
@@ -1,423 +1,423 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \page Page_VIDPID VID and PID values

- *

- *  \section Sec_VIDPID_Allocations

- *  The LUFA library uses VID/PID combinations generously donated by Atmel. The following VID/PID combinations

- *  are used within the LUFA demos, and thus may be re-used by derivations of each demo. Free PID values may be

- *  used by future LUFA demo projects.

- *

- *  <b>These VID/PID values should not be used in commercial designs under any circumstances.</b> Private projects

- *  may use the following values freely, but must accept any collisions due to other LUFA derived private projects

- *  sharing identical values. It is suggested that private projects using interfaces compatible with existing

- *  demos share the save VID/PID value.

- *

- *  <table>

- *

- *   <tr>

- *    <td>

- *     <b>VID</b>

- *    </td>

- *    <td>

- *     <b>PID</b>

- *    </td>

- *    <td>

- *     <b>Usage</b>

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2040

- *    </td>

- *    <td>

- *     Test VID/PID (See below)

- *    </td>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2041

- *    </td>

- *    <td>

- *     Mouse Demo Application

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2042

- *    </td>

- *    <td>

- *     Keyboard Demo Application

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2043

- *    </td>

- *    <td>

- *     Joystick Demo Application

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2044

- *    </td>

- *    <td>

- *     CDC Demo Application

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2045

- *    </td>

- *    <td>

- *     Mass Storage Demo Application

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2046

- *    </td>

- *    <td>

- *     Audio Output Demo Application

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2047

- *    </td>

- *    <td>

- *     Audio Input Demo Application

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2048

- *    </td>

- *    <td>

- *     MIDI Demo Application

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2049

- *    </td>

- *    <td>

- *     MagStripe Project

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x204A

- *    </td>

- *    <td>

- *     CDC Bootloader

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x204B

- *    </td>

- *    <td>

- *     USB to Serial Demo Application

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x204C

- *    </td>

- *    <td>

- *     RNDIS Demo Application

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x204D

- *    </td>

- *    <td>

- *     Combined Keyboard and Mouse Demo Application

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x204E

- *    </td>

- *    <td>

- *     Dual CDC Demo Application

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x204F

- *    </td>

- *    <td>

- *     Generic HID Demo Application

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2060

- *    </td>

- *    <td>

- *     Benito Programmer Project

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2061

- *    </td>

- *    <td>

- *     Combined Mass Storage and Keyboard Demo

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2062

- *    </td>

- *    <td>

- *     Combined CDC and Mouse Demo

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2063

- *    </td>

- *    <td>

- *     Mass Storage/HID Interface Datalogger Project

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2064

- *    </td>

- *    <td>

- *     Interfaceless Control-Only LUFA Devices

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2065

- *    </td>

- *    <td>

- *     <i>Currently Unallocated</i>

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2066

- *    </td>

- *    <td>

- *     <i>Currently Unallocated</i>

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2067

- *    </td>

- *    <td>

- *     <i>Currently Unallocated</i>

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2068

- *    </td>

- *    <td>

- *     <i>Currently Unallocated</i>

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x2069

- *    </td>

- *    <td>

- *     <i>Currently Unallocated</i>

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x206A

- *    </td>

- *    <td>

- *     <i>Currently Unallocated</i>

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x206B

- *    </td>

- *    <td>

- *     <i>Currently Unallocated</i>

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x206C

- *    </td>

- *    <td>

- *     <i>Currently Unallocated</i>

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x206D

- *    </td>

- *    <td>

- *     <i>Currently Unallocated</i>

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x206E

- *    </td>

- *    <td>

- *     <i>Currently Unallocated</i>

- *    </td>

- *   </tr>

- *

- *   <tr>

- *    <td>

- *     0x03EB

- *    </td>

- *    <td>

- *     0x206F

- *    </td>

- *    <td>

- *     <i>Currently Unallocated</i>

- *    </td>

- *   </tr>

- *

- *  </table>

- *

- *  \section Sec_Test_VIDPID The Test VID/PID Combination:

- *  For use in testing of LUFA powered devices during development only, by non-commercial entities.

- *  All devices must accept collisions on this VID/PID range (from other in-development LUFA devices)

- *  to be resolved by using a unique release number in the Device Descriptor. No devices using this

- *  VID/PID combination may be released to the general public.

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \page Page_VIDPID VID and PID values
+ *
+ *  \section Sec_VIDPID_Allocations
+ *  The LUFA library uses VID/PID combinations generously donated by Atmel. The following VID/PID combinations
+ *  are used within the LUFA demos, and thus may be re-used by derivations of each demo. Free PID values may be
+ *  used by future LUFA demo projects.
+ *
+ *  <b>These VID/PID values should not be used in commercial designs under any circumstances.</b> Private projects
+ *  may use the following values freely, but must accept any collisions due to other LUFA derived private projects
+ *  sharing identical values. It is suggested that private projects using interfaces compatible with existing
+ *  demos share the save VID/PID value.
+ *
+ *  <table>
+ *
+ *   <tr>
+ *    <td>
+ *     <b>VID</b>
+ *    </td>
+ *    <td>
+ *     <b>PID</b>
+ *    </td>
+ *    <td>
+ *     <b>Usage</b>
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2040
+ *    </td>
+ *    <td>
+ *     Test VID/PID (See below)
+ *    </td>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2041
+ *    </td>
+ *    <td>
+ *     Mouse Demo Application
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2042
+ *    </td>
+ *    <td>
+ *     Keyboard Demo Application
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2043
+ *    </td>
+ *    <td>
+ *     Joystick Demo Application
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2044
+ *    </td>
+ *    <td>
+ *     CDC Demo Application
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2045
+ *    </td>
+ *    <td>
+ *     Mass Storage Demo Application
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2046
+ *    </td>
+ *    <td>
+ *     Audio Output Demo Application
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2047
+ *    </td>
+ *    <td>
+ *     Audio Input Demo Application
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2048
+ *    </td>
+ *    <td>
+ *     MIDI Demo Application
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2049
+ *    </td>
+ *    <td>
+ *     MagStripe Project
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x204A
+ *    </td>
+ *    <td>
+ *     CDC Bootloader
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x204B
+ *    </td>
+ *    <td>
+ *     USB to Serial Demo Application
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x204C
+ *    </td>
+ *    <td>
+ *     RNDIS Demo Application
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x204D
+ *    </td>
+ *    <td>
+ *     Combined Keyboard and Mouse Demo Application
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x204E
+ *    </td>
+ *    <td>
+ *     Dual CDC Demo Application
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x204F
+ *    </td>
+ *    <td>
+ *     Generic HID Demo Application
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2060
+ *    </td>
+ *    <td>
+ *     Benito Programmer Project
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2061
+ *    </td>
+ *    <td>
+ *     Combined Mass Storage and Keyboard Demo
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2062
+ *    </td>
+ *    <td>
+ *     Combined CDC and Mouse Demo
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2063
+ *    </td>
+ *    <td>
+ *     Mass Storage/HID Interface Datalogger Project
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2064
+ *    </td>
+ *    <td>
+ *     Interfaceless Control-Only LUFA Devices
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2065
+ *    </td>
+ *    <td>
+ *     <i>Currently Unallocated</i>
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2066
+ *    </td>
+ *    <td>
+ *     <i>Currently Unallocated</i>
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2067
+ *    </td>
+ *    <td>
+ *     <i>Currently Unallocated</i>
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2068
+ *    </td>
+ *    <td>
+ *     <i>Currently Unallocated</i>
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x2069
+ *    </td>
+ *    <td>
+ *     <i>Currently Unallocated</i>
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x206A
+ *    </td>
+ *    <td>
+ *     <i>Currently Unallocated</i>
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x206B
+ *    </td>
+ *    <td>
+ *     <i>Currently Unallocated</i>
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x206C
+ *    </td>
+ *    <td>
+ *     <i>Currently Unallocated</i>
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x206D
+ *    </td>
+ *    <td>
+ *     <i>Currently Unallocated</i>
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x206E
+ *    </td>
+ *    <td>
+ *     <i>Currently Unallocated</i>
+ *    </td>
+ *   </tr>
+ *
+ *   <tr>
+ *    <td>
+ *     0x03EB
+ *    </td>
+ *    <td>
+ *     0x206F
+ *    </td>
+ *    <td>
+ *     <i>Currently Unallocated</i>
+ *    </td>
+ *   </tr>
+ *
+ *  </table>
+ *
+ *  \section Sec_Test_VIDPID The Test VID/PID Combination:
+ *  For use in testing of LUFA powered devices during development only, by non-commercial entities.
+ *  All devices must accept collisions on this VID/PID range (from other in-development LUFA devices)
+ *  to be resolved by using a unique release number in the Device Descriptor. No devices using this
+ *  VID/PID combination may be released to the general public.
+ */
diff --git a/LUFA/ManPages/WhyUseLUFA.txt b/LUFA/ManPages/WhyUseLUFA.txt
index b4a1c19f6..bb5fcc784 100644
--- a/LUFA/ManPages/WhyUseLUFA.txt
+++ b/LUFA/ManPages/WhyUseLUFA.txt
@@ -1,46 +1,46 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/**

- *  \page Page_WhyUseLUFA Why Use LUFA?

- *

- *  The LUFA Library has many advantages over implementing the code required to drive the USB AVRs directly.

- *  It is much more preferable to incorporate LUFA into your existing projects - or even make a new project

- *  using LUFA - than it is to start from scratch and use the USB AVR registers directly. Some of these reasons

- *  are:

- *

- *  - <b>Portability:</b>

- *    The LUFA stack is designed to run (at some capacity) on the entire Atmel range of USB AVRs, regardless of the

- *    exact USB controller revision used. If you decide to implement your own USB stack, you will either need to

- *    code around the differences between each USB AVR controller's implementation between different chip models, or

- *    require your code to run on only one specific USB AVR model series.

- *

- *  - <b>Speed of Development:</b>

- *    LUFA ships with a wide range of pre-made demos, bootloaders and projects for you to try, learn and extend. Each

- *    of these demos are tested (where possible) across as many USB AVRs and Operating Systems as possible, to ensure

- *    that they work under as many conditions as possible. In addition, there are inbuilt class drivers for several of

- *    the USB classes which you can make use of in your projects with minimal effort.

- *

- *  - <b>Maintainability:</b>

- *    As LUFA takes care of much of the USB implementation, you can be left to focusing on your actual project's

- *    functionality, rather than being held back developing and debugging the USB stack code. Since LUFA uses clear APIs

- *    for USB development, your code will be more readable than if it had the low level USB stack code integrated into

- *    it directly. Updating the LUFA library is a simple folder-replacement and gives new features and bug fixes in

- *    seconds each time a new release is made.

- *

- *  - <b>Size:</b>

- *    Not just requiring less code to make complex USB devices, LUFA (under most cases with the correct compile options)

- *    requires less FLASH space than Atmel's stack, meaning more space for the user application*.

- *

- *  - <b>Support:</b>

- *    Since many people are now using LUFA in their own projects, you can take advantage of other's knowedge when you run

- *    into difficulties or need some advice. In addition, you can also email the library author to recieve personalised

- *    support when you need it (subject to author's schedule).

- *

- *   <small>* Atmel Stack Mouse Device Demo 4292 bytes, LUFA Mouse Low Level Device Demo 3296 bytes, under identical build

- *   environments</small>

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/**
+ *  \page Page_WhyUseLUFA Why Use LUFA?
+ *
+ *  The LUFA Library has many advantages over implementing the code required to drive the USB AVRs directly.
+ *  It is much more preferable to incorporate LUFA into your existing projects - or even make a new project
+ *  using LUFA - than it is to start from scratch and use the USB AVR registers directly. Some of these reasons
+ *  are:
+ *
+ *  - <b>Portability:</b>
+ *    The LUFA stack is designed to run (at some capacity) on the entire Atmel range of USB AVRs, regardless of the
+ *    exact USB controller revision used. If you decide to implement your own USB stack, you will either need to
+ *    code around the differences between each USB AVR controller's implementation between different chip models, or
+ *    require your code to run on only one specific USB AVR model series.
+ *
+ *  - <b>Speed of Development:</b>
+ *    LUFA ships with a wide range of pre-made demos, bootloaders and projects for you to try, learn and extend. Each
+ *    of these demos are tested (where possible) across as many USB AVRs and Operating Systems as possible, to ensure
+ *    that they work under as many conditions as possible. In addition, there are inbuilt class drivers for several of
+ *    the USB classes which you can make use of in your projects with minimal effort.
+ *
+ *  - <b>Maintainability:</b>
+ *    As LUFA takes care of much of the USB implementation, you can be left to focusing on your actual project's
+ *    functionality, rather than being held back developing and debugging the USB stack code. Since LUFA uses clear APIs
+ *    for USB development, your code will be more readable than if it had the low level USB stack code integrated into
+ *    it directly. Updating the LUFA library is a simple folder-replacement and gives new features and bug fixes in
+ *    seconds each time a new release is made.
+ *
+ *  - <b>Size:</b>
+ *    Not just requiring less code to make complex USB devices, LUFA (under most cases with the correct compile options)
+ *    requires less FLASH space than Atmel's stack, meaning more space for the user application*.
+ *
+ *  - <b>Support:</b>
+ *    Since many people are now using LUFA in their own projects, you can take advantage of other's knowedge when you run
+ *    into difficulties or need some advice. In addition, you can also email the library author to recieve personalised
+ *    support when you need it (subject to author's schedule).
+ *
+ *   <small>* Atmel Stack Mouse Device Demo 4292 bytes, LUFA Mouse Low Level Device Demo 3296 bytes, under identical build
+ *   environments</small>
+ */
  
\ No newline at end of file
diff --git a/LUFA/ManPages/WritingBoardDrivers.txt b/LUFA/ManPages/WritingBoardDrivers.txt
index cf4f47c13..c3371a93a 100644
--- a/LUFA/ManPages/WritingBoardDrivers.txt
+++ b/LUFA/ManPages/WritingBoardDrivers.txt
@@ -1,26 +1,26 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \page Page_WritingBoardDrivers Writing LUFA Board Drivers

- *

- *  LUFA ships with several basic pre-made board drivers, to control hardware present on the supported board

- *  hardware - such as Dataflash ICs, LEDs, Joysticks, or other hardware peripherals. When compiling an application

- *  which makes use of one or more board drivers located in LUFA/Drivers/Board, you must also indicate what board

- *  hardware you are using in your project makefile. This is done by defining the BOARD macro using the -D switch

- *  passed to the compiler, with a constant of BOARD_{Name}. For example <b>-DBOARD=BOARD_USBKEY</b> instructs the

- *  compiler to use the USBKEY board hardware drivers.

- *

- *  If your application does not use *any* board level drivers, you can omit the definition of the BOARD macro.

- *  However, some users may wish to write their own custom board hardware drivers which are to remain compatible

- *  with the LUFA hardware API. To do this, the BOARD macro should be defined to the value BOARD_USER. This indicates

- *  that the board level drivers should be located in a folder named "Board" located inside the application's folder.

- *

- *  When used, the driver stub files located in the DriverStubs folder should be copied to the user Board directory,

- *  and fleshed out to include the values and code needed to control the custom board hardware. Once done, the existing

- *  LUFA board level APIs (accessed in the regular LUFA/Drivers/Board/ folder) will redirect to the user board drivers,

- *  maintaining code compatibility and allowing for a different board to be selected through the project makefile with

- *  no code changes.

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \page Page_WritingBoardDrivers Writing LUFA Board Drivers
+ *
+ *  LUFA ships with several basic pre-made board drivers, to control hardware present on the supported board
+ *  hardware - such as Dataflash ICs, LEDs, Joysticks, or other hardware peripherals. When compiling an application
+ *  which makes use of one or more board drivers located in LUFA/Drivers/Board, you must also indicate what board
+ *  hardware you are using in your project makefile. This is done by defining the BOARD macro using the -D switch
+ *  passed to the compiler, with a constant of BOARD_{Name}. For example <b>-DBOARD=BOARD_USBKEY</b> instructs the
+ *  compiler to use the USBKEY board hardware drivers.
+ *
+ *  If your application does not use *any* board level drivers, you can omit the definition of the BOARD macro.
+ *  However, some users may wish to write their own custom board hardware drivers which are to remain compatible
+ *  with the LUFA hardware API. To do this, the BOARD macro should be defined to the value BOARD_USER. This indicates
+ *  that the board level drivers should be located in a folder named "Board" located inside the application's folder.
+ *
+ *  When used, the driver stub files located in the DriverStubs folder should be copied to the user Board directory,
+ *  and fleshed out to include the values and code needed to control the custom board hardware. Once done, the existing
+ *  LUFA board level APIs (accessed in the regular LUFA/Drivers/Board/ folder) will redirect to the user board drivers,
+ *  maintaining code compatibility and allowing for a different board to be selected through the project makefile with
+ *  no code changes.
+ */