Fix reversed descriptions for the AVR8 USB pad regulator enable/disable masks (thanks to Omar).

2 files changed, 4 insertions, 3 deletions

diff --git a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h
index a6e0067e3..6be41fd96 100644
--- a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h
@@ -119,14 +119,15 @@
 			/** \name USB Controller Option Masks */
 			//@{
 			/** Regulator disable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad
-			 *  regulator should be enabled to regulate the data pin voltages to within the USB standard.
+			 *  regulator should be disabled and the AVR's VCC level used for the data pads.
 			 *
 			 *  \note See USB AVR data sheet for more information on the internal pad regulator.
 			 */
 			#define USB_OPT_REG_DISABLED               (1 << 1)
 
 			/** Regulator enable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad
-			 *  regulator should be disabled and the AVR's VCC level used for the data pads.
+			 *  regulator should be enabled to regulate the data pin voltages from the VBUS level down to a level within
+			 *  the range allowable by the USB standard.
 			 *
 			 *  \note See USB AVR data sheet for more information on the internal pad regulator.
 			 */
diff --git a/LUFA/Drivers/USB/Core/DeviceStandardReq.c b/LUFA/Drivers/USB/Core/DeviceStandardReq.c
index 2e6d8f8c0..f9c64b6f8 100644
--- a/LUFA/Drivers/USB/Core/DeviceStandardReq.c
+++ b/LUFA/Drivers/USB/Core/DeviceStandardReq.c
@@ -114,7 +114,7 @@ void USB_Device_ProcessControlRequest(void)
 
 static void USB_Device_SetAddress(void)
 {
-	uint8_t DeviceAddress       = (USB_ControlRequest.wValue & 0x7F);
+	uint8_t    DeviceAddress    = (USB_ControlRequest.wValue & 0x7F);
 	uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
 	GlobalInterruptDisable();