Removed all user pipe/endpoint interrupt APIs, added internal library support for interrupt driven control endpoints when in device mode by defining INTERRUPT_CONTROL_ENDPOINT token and passing it to the compiler via the -D switch.

3 files changed, 27 insertions, 43 deletions

diff --git a/LUFA/Drivers/USB/HighLevel/USBInterrupt.c b/LUFA/Drivers/USB/HighLevel/USBInterrupt.c
index 93bd6d084..14d277c9a 100644
--- a/LUFA/Drivers/USB/HighLevel/USBInterrupt.c
+++ b/LUFA/Drivers/USB/HighLevel/USBInterrupt.c
@@ -174,6 +174,10 @@ ISR(USB_GEN_vect, ISR_BLOCK)
 		                           ENDPOINT_DIR_OUT, USB_ControlEndpointSize,

 		                           ENDPOINT_BANK_SINGLE);

 

+		#if defined(INTERRUPT_CONTROL_ENDPOINT)

+		USB_INT_Enable(USB_INT_ENDPOINT_SETUP);

+		#endif

+

 		RAISE_EVENT(USB_Reset);

 	}

 	#endif

@@ -249,3 +253,16 @@ ISR(USB_GEN_vect, ISR_BLOCK)
 	}

 	#endif

 }

+

+#if defined(INTERRUPT_CONTROL_ENDPOINT)

+ISR(USB_COM_vect, ISR_BLOCK)

+{

+	uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint();

+

+	USB_USBTask();

+

+	USB_INT_Clear(USB_INT_ENDPOINT_SETUP);

+	

+	Endpoint_SelectEndpoint(PrevSelectedEndpoint);	

+}

+#endif

diff --git a/LUFA/Drivers/USB/HighLevel/USBInterrupt.h b/LUFA/Drivers/USB/HighLevel/USBInterrupt.h
index 9a1604703..7fbb33efc 100644
--- a/LUFA/Drivers/USB/HighLevel/USBInterrupt.h
+++ b/LUFA/Drivers/USB/HighLevel/USBInterrupt.h
@@ -28,16 +28,6 @@
   this software.

 */

 

-/** \ingroup Group_USB

- *  @defgroup Group_USBInterrupt Endpoint and Pipe Interrupts

- *

- *  This module manages the main USB interrupt vector, for handling such events as VBUS interrupts

- *  (on supported USB AVR models), device connections and disconnections, etc. as well as providing

- *  easy to use macros for the management of the unified Endpoint/Pipe interrupt vector.

- *

- *  @{

- */

-

 #ifndef __USBINTERRUPT_H__

 #define __USBINTERRUPT_H__

 

@@ -56,37 +46,6 @@
 		#endif

 

 	/* Public Interface - May be used in end-application: */

-		/* Macros: */

-			/** Vector name for the common endpoint and pipe vector. This can be used to write an ISR handler

-			 *  for the endpoint and pipe events, to make certain USB functions interrupt rather than poll

-			 *  driven.

-			 */

-			#define ENDPOINT_PIPE_vect                       USB_COM_vect

-	

-			/** Enables the given USB interrupt vector (such as the ENDPOINT_INT_* and PIPE_INT_* vectors in

-			 *  Endpoint.h and Pipe.h).

-			 */

-			#define USB_INT_Enable(int)              MACROS{ USB_INT_GET_EN_REG(int)   |=   USB_INT_GET_EN_MASK(int);   }MACROE

-

-			/** Disables the given USB interrupt vector.

-			 *

-			 *  \see \ref USB_INT_Enable()

-			 */

-			#define USB_INT_Disable(int)             MACROS{ USB_INT_GET_EN_REG(int)   &= ~(USB_INT_GET_EN_MASK(int));  }MACROE

-

-			/** Resets the given USB interrupt flag, so that the interrupt is re-primed for the next firing. */

-			#define USB_INT_Clear(int)               MACROS{ USB_INT_GET_INT_REG(int)  &= ~(USB_INT_GET_INT_MASK(int)); }MACROE

-			

-			/** Returns boolean false if the given USB interrupt is disabled, or true if the interrupt is currently

-			 *  enabled.

-			 */

-			#define USB_INT_IsEnabled(int)                 ((USB_INT_GET_EN_REG(int)   &    USB_INT_GET_EN_MASK(int)) ? true : false)

-

-			/** Returns boolean true if the given interrupt flag is set (i.e. the condition for the interrupt has occurred,

-			 *  but the interrupt vector is not necessarily enabled), otherwise returns false.

-			 */

-			#define USB_INT_HasOccurred(int)               ((USB_INT_GET_INT_REG(int)  &    USB_INT_GET_INT_MASK(int)) ? true : false)

-		

 		/* Throwable Events: */

 			/** This module raises the USB Connected interrupt when the AVR is attached to a host while in device

 			 *  USB mode.

@@ -196,6 +155,12 @@
 	/* Private Interface - For use in library only: */

 	#if !defined(__DOXYGEN__)

 		/* Macros: */

+			#define USB_INT_Enable(int)              MACROS{ USB_INT_GET_EN_REG(int)   |=   USB_INT_GET_EN_MASK(int);   }MACROE

+			#define USB_INT_Disable(int)             MACROS{ USB_INT_GET_EN_REG(int)   &= ~(USB_INT_GET_EN_MASK(int));  }MACROE

+			#define USB_INT_Clear(int)               MACROS{ USB_INT_GET_INT_REG(int)  &= ~(USB_INT_GET_INT_MASK(int)); }MACROE

+			#define USB_INT_IsEnabled(int)                 ((USB_INT_GET_EN_REG(int)   &    USB_INT_GET_EN_MASK(int)) ? true : false)

+			#define USB_INT_HasOccurred(int)               ((USB_INT_GET_INT_REG(int)  &    USB_INT_GET_INT_MASK(int)) ? true : false)

+

 			#define USB_INT_GET_EN_REG(a, b, c, d)           a

 			#define USB_INT_GET_EN_MASK(a, b, c, d)          b

 			#define USB_INT_GET_INT_REG(a, b, c, d)          c

@@ -214,6 +179,7 @@
 			#define USB_INT_HSOFI                            UHIEN,  (1 << HSOFE)  , UHINT , (1 << HSOFI)

 			#define USB_INT_RSTI                             UHIEN , (1 << RSTE)   , UHINT , (1 << RSTI)

 			#define USB_INT_SRPI                             OTGIEN, (1 << SRPE)   , OTGINT, (1 << SRPI)

+			#define USB_INT_ENDPOINT_SETUP                   UEIENX, (1 << RXSTPE) , UEINTX, (1 << RXSTPI)

 	

 		/* Function Prototypes: */

 			void USB_INT_ClearAllInterrupts(void);

@@ -226,5 +192,3 @@
 		#endif

 

 #endif

-

-/** @} */

diff --git a/LUFA/Drivers/USB/HighLevel/USBTask.h b/LUFA/Drivers/USB/HighLevel/USBTask.h
index 1718ed691..9cb4e6059 100644
--- a/LUFA/Drivers/USB/HighLevel/USBTask.h
+++ b/LUFA/Drivers/USB/HighLevel/USBTask.h
@@ -183,6 +183,9 @@
 			 *    - In host mode, it may be disabled at start-up, enabled on the firing of the \ref USB_DeviceAttached

 			 *    event and disabled again on the firing of the \ref USB_DeviceUnattached event.

 			 *

+			 *  If in device mode (only), the control endpoint can instead be managed via interrupts entirely by the library

+			 *  by defining the INTERRUPT_CONTROL_ENDPOINT token and passing it to the compiler via the -D switch.

+			 *

 			 *  \see \ref Group_Events for more information on the USB events.

 			 *

 			 *  \ingroup Group_USBManagement