Fix corrupt Doxygen configuration files, update project names.

5 files changed, 269 insertions, 212 deletions

diff --git a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf
index bfff60a9b..dd5fe211c 100644
--- a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf
+++ b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf
@@ -26,13 +26,13 @@ DOXYFILE_ENCODING      = UTF-8
 # identify the project. Note that if you do not use Doxywizard you need
 # to put quotes around the project name if it contains spaces.
 
-PROJECT_NAME           = "My Project"
+PROJECT_NAME           = "LUFA Library - Audio Input Device Demo"
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         =
+PROJECT_NUMBER         = 0.0.0
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -52,7 +52,7 @@ PROJECT_LOGO           =
 # If a relative path is entered, it will be relative to the location
 # where doxygen was started. If left blank the current directory will be used.
 
-OUTPUT_DIRECTORY       =
+OUTPUT_DIRECTORY       = ./Documentation/
 
 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
 # 4096 sub-directories (in 2 levels) under the output directory of each output
@@ -100,7 +100,17 @@ REPEAT_BRIEF           = YES
 # "The $name file" "is" "provides" "specifies" "contains"
 # "represents" "a" "an" "the"
 
-ABBREVIATE_BRIEF       =
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
 
 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
 # Doxygen will generate a detailed section even if there is only a brief
@@ -143,7 +153,7 @@ STRIP_FROM_INC_PATH    =
 # (but less readable) file names. This can be useful if your file system
 # doesn't support long names like on DOS, Mac, or CD-ROM.
 
-SHORT_NAMES            = NO
+SHORT_NAMES            = YES
 
 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
 # will interpret the first line (until the first dot) of a JavaDoc-style
@@ -184,7 +194,7 @@ SEPARATE_MEMBER_PAGES  = NO
 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
 # Doxygen uses this value to replace tabs by spaces in code fragments.
 
-TAB_SIZE               = 8
+TAB_SIZE               = 4
 
 # This tag can be used to specify a number of aliases that acts
 # as commands in the documentation. An alias has the form "name=value".
@@ -207,7 +217,7 @@ TCL_SUBST              =
 # For instance, some of the names that are used will be different. The list
 # of all members will be omitted, etc.
 
-OPTIMIZE_OUTPUT_FOR_C  = NO
+OPTIMIZE_OUTPUT_FOR_C  = YES
 
 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
 # sources only. Doxygen will then generate output that is more tailored for
@@ -355,12 +365,12 @@ LOOKUP_CACHE_SIZE      = 0
 # Private class members and static file members will be hidden unless
 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
 
-EXTRACT_ALL            = NO
+EXTRACT_ALL            = YES
 
 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
 # will be included in the documentation.
 
-EXTRACT_PRIVATE        = NO
+EXTRACT_PRIVATE        = YES
 
 # If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
 
@@ -369,7 +379,7 @@ EXTRACT_PACKAGE        = NO
 # If the EXTRACT_STATIC tag is set to YES all static members of a file
 # will be included in the documentation.
 
-EXTRACT_STATIC         = NO
+EXTRACT_STATIC         = YES
 
 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
 # defined locally in source files will be included in the documentation.
@@ -512,19 +522,19 @@ STRICT_PROTO_MATCHING  = NO
 # disable (NO) the todo list. This list is created by putting \todo
 # commands in the documentation.
 
-GENERATE_TODOLIST      = YES
+GENERATE_TODOLIST      = NO
 
 # The GENERATE_TESTLIST tag can be used to enable (YES) or
 # disable (NO) the test list. This list is created by putting \test
 # commands in the documentation.
 
-GENERATE_TESTLIST      = YES
+GENERATE_TESTLIST      = NO
 
 # The GENERATE_BUGLIST tag can be used to enable (YES) or
 # disable (NO) the bug list. This list is created by putting \bug
 # commands in the documentation.
 
-GENERATE_BUGLIST       = YES
+GENERATE_BUGLIST       = NO
 
 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
 # disable (NO) the deprecated list. This list is created by putting
@@ -557,7 +567,7 @@ SHOW_USED_FILES        = YES
 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
 # in the documentation. The default is NO.
 
-SHOW_DIRECTORIES       = NO
+SHOW_DIRECTORIES       = YES
 
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
@@ -608,7 +618,7 @@ CITE_BIB_FILES         =
 # The QUIET tag can be used to turn on/off the messages that are generated
 # by doxygen. Possible values are YES and NO. If left blank NO is used.
 
-QUIET                  = NO
+QUIET                  = YES
 
 # The WARNINGS tag can be used to turn on/off the warning messages that are
 # generated by doxygen. Possible values are YES and NO. If left blank
@@ -635,7 +645,7 @@ WARN_IF_DOC_ERROR      = YES
 # wrong or incomplete parameter documentation, but not about the absence of
 # documentation.
 
-WARN_NO_PARAMDOC       = NO
+WARN_NO_PARAMDOC       = YES
 
 # The WARN_FORMAT tag determines the format of the warning messages that
 # doxygen can produce. The string should contain the $file, $line, and $text
@@ -661,7 +671,7 @@ WARN_LOGFILE           =
 # directories like "/usr/src/myproject". Separate the files or directories
 # with spaces.
 
-INPUT                  =
+INPUT                  = ./
 
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
@@ -679,13 +689,15 @@ INPUT_ENCODING         = UTF-8
 # *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
 # *.f90 *.f *.for *.vhd *.vhdl
 
-FILE_PATTERNS          =
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
 
 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
 # should be searched for input files as well. Possible values are YES and NO.
 # If left blank NO is used.
 
-RECURSIVE              = NO
+RECURSIVE              = YES
 
 # The EXCLUDE tag can be used to specify files and/or directories that should be
 # excluded from the INPUT source files. This way you can easily exclude a
@@ -693,7 +705,7 @@ RECURSIVE              = NO
 # Note that relative paths are relative to the directory from which doxygen is
 # run.
 
-EXCLUDE                =
+EXCLUDE                = Documentation/
 
 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
 # directories that are symbolic links (a Unix file system feature) are excluded
@@ -715,7 +727,8 @@ EXCLUDE_PATTERNS       =
 # wildcard * is used, a substring. Examples: ANamespace, AClass,
 # AClass::ANamespace, ANamespace::*Test
 
-EXCLUDE_SYMBOLS        =
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
 
 # The EXAMPLE_PATH tag can be used to specify one or more files or
 # directories that contain example code fragments that are included (see
@@ -728,7 +741,7 @@ EXAMPLE_PATH           =
 # and *.h) to filter out the source-files in the directories. If left
 # blank all files are included.
 
-EXAMPLE_PATTERNS       =
+EXAMPLE_PATTERNS       = *
 
 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
 # searched for input files to be used with the \include or \dontinclude
@@ -819,7 +832,7 @@ REFERENCES_RELATION    = NO
 # link to the source code.
 # Otherwise they will link to the documentation.
 
-REFERENCES_LINK_SOURCE = YES
+REFERENCES_LINK_SOURCE = NO
 
 # If the USE_HTAGS tag is set to YES then the references to source code
 # will point to the HTML generated by the htags(1) tool instead of doxygen
@@ -833,7 +846,7 @@ USE_HTAGS              = NO
 # will generate a verbatim copy of the header file for each class for
 # which an include is specified. Set to NO to disable this.
 
-VERBATIM_HEADERS       = YES
+VERBATIM_HEADERS       = NO
 
 #---------------------------------------------------------------------------
 # configuration options related to the alphabetical class index
@@ -945,7 +958,7 @@ HTML_COLORSTYLE_GAMMA  = 80
 # page will contain the date and time when the page was generated. Setting
 # this to NO can help when comparing the output of multiple runs.
 
-HTML_TIMESTAMP         = YES
+HTML_TIMESTAMP         = NO
 
 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
 # files or namespaces will be aligned in HTML using tables. If set to
@@ -959,7 +972,7 @@ HTML_ALIGN_MEMBERS     = YES
 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
 
-HTML_DYNAMIC_SECTIONS  = NO
+HTML_DYNAMIC_SECTIONS  = YES
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
@@ -1040,7 +1053,7 @@ BINARY_TOC             = NO
 # The TOC_EXPAND flag can be set to YES to add extra items for group members
 # to the contents of the HTML help documentation and to the tree view.
 
-TOC_EXPAND             = NO
+TOC_EXPAND             = YES
 
 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
@@ -1130,14 +1143,14 @@ DISABLE_INDEX          = NO
 # Since the tree basically has the same information as the tab index you
 # could consider to set DISABLE_INDEX to NO when enabling this option.
 
-GENERATE_TREEVIEW      = NO
+GENERATE_TREEVIEW      = YES
 
 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
 # (range [0,1..20]) that doxygen will group on one line in the generated HTML
 # documentation. Note that a value of 0 will completely suppress the enum
 # values from appearing in the overview section.
 
-ENUM_VALUES_PER_LINE   = 4
+ENUM_VALUES_PER_LINE   = 1
 
 # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
 # and Class Hierarchy pages using a tree view instead of an ordered list.
@@ -1205,7 +1218,7 @@ MATHJAX_EXTENSIONS     =
 # typically be disabled. For large projects the javascript based search engine
 # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
 
-SEARCHENGINE           = YES
+SEARCHENGINE           = NO
 
 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
 # implemented using a PHP enabled web server instead of at the web client
@@ -1224,7 +1237,7 @@ SERVER_BASED_SEARCH    = NO
 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
 # generate Latex output.
 
-GENERATE_LATEX         = YES
+GENERATE_LATEX         = NO
 
 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
@@ -1256,7 +1269,7 @@ COMPACT_LATEX          = NO
 # by the printer. Possible values are: a4, letter, legal and
 # executive. If left blank a4wide will be used.
 
-PAPER_TYPE             = a4
+PAPER_TYPE             = a4wide
 
 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
 # packages that should be included in the LaTeX output.
@@ -1483,13 +1496,13 @@ ENABLE_PREPROCESSING   = YES
 # compilation will be performed. Macro expansion can be done in a controlled
 # way by setting EXPAND_ONLY_PREDEF to YES.
 
-MACRO_EXPANSION        = NO
+MACRO_EXPANSION        = YES
 
 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
 # then the macro expansion is limited to the macros specified with the
 # PREDEFINED and EXPAND_AS_DEFINED tags.
 
-EXPAND_ONLY_PREDEF     = NO
+EXPAND_ONLY_PREDEF     = YES
 
 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
 # pointed to by INCLUDE_PATH will be searched when a #include is found.
@@ -1517,7 +1530,8 @@ INCLUDE_FILE_PATTERNS  =
 # undefined via #undef or recursively expanded use the := operator
 # instead of the = operator.
 
-PREDEFINED             =
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
 
 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
 # this tag can be used to specify a list of macro names that should be expanded.
@@ -1585,7 +1599,7 @@ PERL_PATH              = /usr/bin/perl
 # this option also works with HAVE_DOT disabled, but it is recommended to
 # install and use dot, since it yields more powerful graphs.
 
-CLASS_DIAGRAMS         = YES
+CLASS_DIAGRAMS         = NO
 
 # You can define message sequence charts within doxygen comments using the \msc
 # command. Doxygen will then run the mscgen tool (see
@@ -1624,7 +1638,7 @@ DOT_NUM_THREADS        = 0
 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
 # directory containing the font.
 
-DOT_FONTNAME           = Helvetica
+DOT_FONTNAME           = FreeSans
 
 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
 # The default size is 10pt.
@@ -1642,19 +1656,19 @@ DOT_FONTPATH           =
 # indirect inheritance relations. Setting this tag to YES will force the
 # CLASS_DIAGRAMS tag to NO.
 
-CLASS_GRAPH            = YES
+CLASS_GRAPH            = NO
 
 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for each documented class showing the direct and
 # indirect implementation dependencies (inheritance, containment, and
 # class references variables) of the class with other documented classes.
 
-COLLABORATION_GRAPH    = YES
+COLLABORATION_GRAPH    = NO
 
 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for groups, showing the direct groups dependencies
 
-GROUP_GRAPHS           = YES
+GROUP_GRAPHS           = NO
 
 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
 # collaboration diagrams in a style similar to the OMG's Unified Modeling
@@ -1681,14 +1695,14 @@ TEMPLATE_RELATIONS     = NO
 # file showing the direct and indirect include dependencies of the file with
 # other documented files.
 
-INCLUDE_GRAPH          = YES
+INCLUDE_GRAPH          = NO
 
 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
 # documented header file showing the documented files that directly or
 # indirectly include this file.
 
-INCLUDED_BY_GRAPH      = YES
+INCLUDED_BY_GRAPH      = NO
 
 # If the CALL_GRAPH and HAVE_DOT options are set to YES then
 # doxygen will generate a call dependency graph for every global function
@@ -1709,14 +1723,14 @@ CALLER_GRAPH           = NO
 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
 # will generate a graphical hierarchy of all classes instead of a textual one.
 
-GRAPHICAL_HIERARCHY    = YES
+GRAPHICAL_HIERARCHY    = NO
 
 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
 
-DIRECTORY_GRAPH        = YES
+DIRECTORY_GRAPH        = NO
 
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
 # generated by dot. Possible values are svg, png, jpg, or gif.
@@ -1760,7 +1774,7 @@ MSCFILE_DIRS           =
 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
 
-DOT_GRAPH_MAX_NODES    = 50
+DOT_GRAPH_MAX_NODES    = 15
 
 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
 # graphs generated by dot. A depth value of 3 means that only nodes reachable
@@ -1770,7 +1784,7 @@ DOT_GRAPH_MAX_NODES    = 50
 # code bases. Also note that the size of a graph can be further restricted by
 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
 
-MAX_DOT_GRAPH_DEPTH    = 0
+MAX_DOT_GRAPH_DEPTH    = 2
 
 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
 # background. This is disabled by default, because dot on Windows does not
@@ -1778,7 +1792,7 @@ MAX_DOT_GRAPH_DEPTH    = 0
 # enabling this option may lead to badly anti-aliased labels on the edges of
 # a graph (i.e. they become hard to read).
 
-DOT_TRANSPARENT        = NO
+DOT_TRANSPARENT        = YES
 
 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
 # files in one run (i.e. multiple -o and -T options on the command line). This
diff --git a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf
index bfff60a9b..c50327d39 100644
--- a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf
+++ b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf
@@ -26,13 +26,13 @@ DOXYFILE_ENCODING      = UTF-8
 # identify the project. Note that if you do not use Doxywizard you need
 # to put quotes around the project name if it contains spaces.
 
-PROJECT_NAME           = "My Project"
+PROJECT_NAME           = "LUFA Library - Audio Output Device Demo"
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         =
+PROJECT_NUMBER         = 0.0.0
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -52,7 +52,7 @@ PROJECT_LOGO           =
 # If a relative path is entered, it will be relative to the location
 # where doxygen was started. If left blank the current directory will be used.
 
-OUTPUT_DIRECTORY       =
+OUTPUT_DIRECTORY       = ./Documentation/
 
 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
 # 4096 sub-directories (in 2 levels) under the output directory of each output
@@ -100,7 +100,17 @@ REPEAT_BRIEF           = YES
 # "The $name file" "is" "provides" "specifies" "contains"
 # "represents" "a" "an" "the"
 
-ABBREVIATE_BRIEF       =
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
 
 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
 # Doxygen will generate a detailed section even if there is only a brief
@@ -143,7 +153,7 @@ STRIP_FROM_INC_PATH    =
 # (but less readable) file names. This can be useful if your file system
 # doesn't support long names like on DOS, Mac, or CD-ROM.
 
-SHORT_NAMES            = NO
+SHORT_NAMES            = YES
 
 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
 # will interpret the first line (until the first dot) of a JavaDoc-style
@@ -184,7 +194,7 @@ SEPARATE_MEMBER_PAGES  = NO
 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
 # Doxygen uses this value to replace tabs by spaces in code fragments.
 
-TAB_SIZE               = 8
+TAB_SIZE               = 4
 
 # This tag can be used to specify a number of aliases that acts
 # as commands in the documentation. An alias has the form "name=value".
@@ -207,7 +217,7 @@ TCL_SUBST              =
 # For instance, some of the names that are used will be different. The list
 # of all members will be omitted, etc.
 
-OPTIMIZE_OUTPUT_FOR_C  = NO
+OPTIMIZE_OUTPUT_FOR_C  = YES
 
 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
 # sources only. Doxygen will then generate output that is more tailored for
@@ -283,7 +293,7 @@ IDL_PROPERTY_SUPPORT   = YES
 # member in the group (if any) for the other members of the group. By default
 # all members of a group must be documented explicitly.
 
-DISTRIBUTE_GROUP_DOC   = NO
+DISTRIBUTE_GROUP_DOC   = YES
 
 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
 # the same type (for instance a group of public functions) to be put as a
@@ -355,12 +365,12 @@ LOOKUP_CACHE_SIZE      = 0
 # Private class members and static file members will be hidden unless
 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
 
-EXTRACT_ALL            = NO
+EXTRACT_ALL            = YES
 
 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
 # will be included in the documentation.
 
-EXTRACT_PRIVATE        = NO
+EXTRACT_PRIVATE        = YES
 
 # If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
 
@@ -369,7 +379,7 @@ EXTRACT_PACKAGE        = NO
 # If the EXTRACT_STATIC tag is set to YES all static members of a file
 # will be included in the documentation.
 
-EXTRACT_STATIC         = NO
+EXTRACT_STATIC         = YES
 
 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
 # defined locally in source files will be included in the documentation.
@@ -512,19 +522,19 @@ STRICT_PROTO_MATCHING  = NO
 # disable (NO) the todo list. This list is created by putting \todo
 # commands in the documentation.
 
-GENERATE_TODOLIST      = YES
+GENERATE_TODOLIST      = NO
 
 # The GENERATE_TESTLIST tag can be used to enable (YES) or
 # disable (NO) the test list. This list is created by putting \test
 # commands in the documentation.
 
-GENERATE_TESTLIST      = YES
+GENERATE_TESTLIST      = NO
 
 # The GENERATE_BUGLIST tag can be used to enable (YES) or
 # disable (NO) the bug list. This list is created by putting \bug
 # commands in the documentation.
 
-GENERATE_BUGLIST       = YES
+GENERATE_BUGLIST       = NO
 
 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
 # disable (NO) the deprecated list. This list is created by putting
@@ -557,7 +567,7 @@ SHOW_USED_FILES        = YES
 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
 # in the documentation. The default is NO.
 
-SHOW_DIRECTORIES       = NO
+SHOW_DIRECTORIES       = YES
 
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
@@ -608,7 +618,7 @@ CITE_BIB_FILES         =
 # The QUIET tag can be used to turn on/off the messages that are generated
 # by doxygen. Possible values are YES and NO. If left blank NO is used.
 
-QUIET                  = NO
+QUIET                  = YES
 
 # The WARNINGS tag can be used to turn on/off the warning messages that are
 # generated by doxygen. Possible values are YES and NO. If left blank
@@ -635,7 +645,7 @@ WARN_IF_DOC_ERROR      = YES
 # wrong or incomplete parameter documentation, but not about the absence of
 # documentation.
 
-WARN_NO_PARAMDOC       = NO
+WARN_NO_PARAMDOC       = YES
 
 # The WARN_FORMAT tag determines the format of the warning messages that
 # doxygen can produce. The string should contain the $file, $line, and $text
@@ -661,7 +671,7 @@ WARN_LOGFILE           =
 # directories like "/usr/src/myproject". Separate the files or directories
 # with spaces.
 
-INPUT                  =
+INPUT                  = ./
 
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
@@ -679,13 +689,15 @@ INPUT_ENCODING         = UTF-8
 # *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
 # *.f90 *.f *.for *.vhd *.vhdl
 
-FILE_PATTERNS          =
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
 
 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
 # should be searched for input files as well. Possible values are YES and NO.
 # If left blank NO is used.
 
-RECURSIVE              = NO
+RECURSIVE              = YES
 
 # The EXCLUDE tag can be used to specify files and/or directories that should be
 # excluded from the INPUT source files. This way you can easily exclude a
@@ -693,7 +705,7 @@ RECURSIVE              = NO
 # Note that relative paths are relative to the directory from which doxygen is
 # run.
 
-EXCLUDE                =
+EXCLUDE                = Documentation/
 
 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
 # directories that are symbolic links (a Unix file system feature) are excluded
@@ -715,7 +727,8 @@ EXCLUDE_PATTERNS       =
 # wildcard * is used, a substring. Examples: ANamespace, AClass,
 # AClass::ANamespace, ANamespace::*Test
 
-EXCLUDE_SYMBOLS        =
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
 
 # The EXAMPLE_PATH tag can be used to specify one or more files or
 # directories that contain example code fragments that are included (see
@@ -728,7 +741,7 @@ EXAMPLE_PATH           =
 # and *.h) to filter out the source-files in the directories. If left
 # blank all files are included.
 
-EXAMPLE_PATTERNS       =
+EXAMPLE_PATTERNS       = *
 
 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
 # searched for input files to be used with the \include or \dontinclude
@@ -819,7 +832,7 @@ REFERENCES_RELATION    = NO
 # link to the source code.
 # Otherwise they will link to the documentation.
 
-REFERENCES_LINK_SOURCE = YES
+REFERENCES_LINK_SOURCE = NO
 
 # If the USE_HTAGS tag is set to YES then the references to source code
 # will point to the HTML generated by the htags(1) tool instead of doxygen
@@ -833,7 +846,7 @@ USE_HTAGS              = NO
 # will generate a verbatim copy of the header file for each class for
 # which an include is specified. Set to NO to disable this.
 
-VERBATIM_HEADERS       = YES
+VERBATIM_HEADERS       = NO
 
 #---------------------------------------------------------------------------
 # configuration options related to the alphabetical class index
@@ -945,7 +958,7 @@ HTML_COLORSTYLE_GAMMA  = 80
 # page will contain the date and time when the page was generated. Setting
 # this to NO can help when comparing the output of multiple runs.
 
-HTML_TIMESTAMP         = YES
+HTML_TIMESTAMP         = NO
 
 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
 # files or namespaces will be aligned in HTML using tables. If set to
@@ -959,7 +972,7 @@ HTML_ALIGN_MEMBERS     = YES
 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
 
-HTML_DYNAMIC_SECTIONS  = NO
+HTML_DYNAMIC_SECTIONS  = YES
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
@@ -1040,7 +1053,7 @@ BINARY_TOC             = NO
 # The TOC_EXPAND flag can be set to YES to add extra items for group members
 # to the contents of the HTML help documentation and to the tree view.
 
-TOC_EXPAND             = NO
+TOC_EXPAND             = YES
 
 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
@@ -1130,14 +1143,14 @@ DISABLE_INDEX          = NO
 # Since the tree basically has the same information as the tab index you
 # could consider to set DISABLE_INDEX to NO when enabling this option.
 
-GENERATE_TREEVIEW      = NO
+GENERATE_TREEVIEW      = YES
 
 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
 # (range [0,1..20]) that doxygen will group on one line in the generated HTML
 # documentation. Note that a value of 0 will completely suppress the enum
 # values from appearing in the overview section.
 
-ENUM_VALUES_PER_LINE   = 4
+ENUM_VALUES_PER_LINE   = 1
 
 # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
 # and Class Hierarchy pages using a tree view instead of an ordered list.
@@ -1205,7 +1218,7 @@ MATHJAX_EXTENSIONS     =
 # typically be disabled. For large projects the javascript based search engine
 # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
 
-SEARCHENGINE           = YES
+SEARCHENGINE           = NO
 
 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
 # implemented using a PHP enabled web server instead of at the web client
@@ -1224,7 +1237,7 @@ SERVER_BASED_SEARCH    = NO
 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
 # generate Latex output.
 
-GENERATE_LATEX         = YES
+GENERATE_LATEX         = NO
 
 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
@@ -1256,7 +1269,7 @@ COMPACT_LATEX          = NO
 # by the printer. Possible values are: a4, letter, legal and
 # executive. If left blank a4wide will be used.
 
-PAPER_TYPE             = a4
+PAPER_TYPE             = a4wide
 
 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
 # packages that should be included in the LaTeX output.
@@ -1483,13 +1496,13 @@ ENABLE_PREPROCESSING   = YES
 # compilation will be performed. Macro expansion can be done in a controlled
 # way by setting EXPAND_ONLY_PREDEF to YES.
 
-MACRO_EXPANSION        = NO
+MACRO_EXPANSION        = YES
 
 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
 # then the macro expansion is limited to the macros specified with the
 # PREDEFINED and EXPAND_AS_DEFINED tags.
 
-EXPAND_ONLY_PREDEF     = NO
+EXPAND_ONLY_PREDEF     = YES
 
 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
 # pointed to by INCLUDE_PATH will be searched when a #include is found.
@@ -1517,7 +1530,8 @@ INCLUDE_FILE_PATTERNS  =
 # undefined via #undef or recursively expanded use the := operator
 # instead of the = operator.
 
-PREDEFINED             =
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
 
 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
 # this tag can be used to specify a list of macro names that should be expanded.
@@ -1585,7 +1599,7 @@ PERL_PATH              = /usr/bin/perl
 # this option also works with HAVE_DOT disabled, but it is recommended to
 # install and use dot, since it yields more powerful graphs.
 
-CLASS_DIAGRAMS         = YES
+CLASS_DIAGRAMS         = NO
 
 # You can define message sequence charts within doxygen comments using the \msc
 # command. Doxygen will then run the mscgen tool (see
@@ -1624,7 +1638,7 @@ DOT_NUM_THREADS        = 0
 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
 # directory containing the font.
 
-DOT_FONTNAME           = Helvetica
+DOT_FONTNAME           = FreeSans
 
 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
 # The default size is 10pt.
@@ -1642,19 +1656,19 @@ DOT_FONTPATH           =
 # indirect inheritance relations. Setting this tag to YES will force the
 # CLASS_DIAGRAMS tag to NO.
 
-CLASS_GRAPH            = YES
+CLASS_GRAPH            = NO
 
 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for each documented class showing the direct and
 # indirect implementation dependencies (inheritance, containment, and
 # class references variables) of the class with other documented classes.
 
-COLLABORATION_GRAPH    = YES
+COLLABORATION_GRAPH    = NO
 
 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for groups, showing the direct groups dependencies
 
-GROUP_GRAPHS           = YES
+GROUP_GRAPHS           = NO
 
 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
 # collaboration diagrams in a style similar to the OMG's Unified Modeling
@@ -1681,14 +1695,14 @@ TEMPLATE_RELATIONS     = NO
 # file showing the direct and indirect include dependencies of the file with
 # other documented files.
 
-INCLUDE_GRAPH          = YES
+INCLUDE_GRAPH          = NO
 
 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
 # documented header file showing the documented files that directly or
 # indirectly include this file.
 
-INCLUDED_BY_GRAPH      = YES
+INCLUDED_BY_GRAPH      = NO
 
 # If the CALL_GRAPH and HAVE_DOT options are set to YES then
 # doxygen will generate a call dependency graph for every global function
@@ -1709,14 +1723,14 @@ CALLER_GRAPH           = NO
 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
 # will generate a graphical hierarchy of all classes instead of a textual one.
 
-GRAPHICAL_HIERARCHY    = YES
+GRAPHICAL_HIERARCHY    = NO
 
 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
 
-DIRECTORY_GRAPH        = YES
+DIRECTORY_GRAPH        = NO
 
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
 # generated by dot. Possible values are svg, png, jpg, or gif.
@@ -1760,7 +1774,7 @@ MSCFILE_DIRS           =
 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
 
-DOT_GRAPH_MAX_NODES    = 50
+DOT_GRAPH_MAX_NODES    = 15
 
 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
 # graphs generated by dot. A depth value of 3 means that only nodes reachable
@@ -1770,7 +1784,7 @@ DOT_GRAPH_MAX_NODES    = 50
 # code bases. Also note that the size of a graph can be further restricted by
 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
 
-MAX_DOT_GRAPH_DEPTH    = 0
+MAX_DOT_GRAPH_DEPTH    = 2
 
 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
 # background. This is disabled by default, because dot on Windows does not
@@ -1778,7 +1792,7 @@ MAX_DOT_GRAPH_DEPTH    = 0
 # enabling this option may lead to badly anti-aliased labels on the edges of
 # a graph (i.e. they become hard to read).
 
-DOT_TRANSPARENT        = NO
+DOT_TRANSPARENT        = YES
 
 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
 # files in one run (i.e. multiple -o and -T options on the command line). This
diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf
index bfff60a9b..cd37f7df4 100644
--- a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf
+++ b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf
@@ -26,13 +26,13 @@ DOXYFILE_ENCODING      = UTF-8
 # identify the project. Note that if you do not use Doxywizard you need
 # to put quotes around the project name if it contains spaces.
 
-PROJECT_NAME           = "My Project"
+PROJECT_NAME           = "LUFA Library - Dual Virtual Serial Device Demo"
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         =
+PROJECT_NUMBER         = 0.0.0
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -52,7 +52,7 @@ PROJECT_LOGO           =
 # If a relative path is entered, it will be relative to the location
 # where doxygen was started. If left blank the current directory will be used.
 
-OUTPUT_DIRECTORY       =
+OUTPUT_DIRECTORY       = ./Documentation/
 
 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
 # 4096 sub-directories (in 2 levels) under the output directory of each output
@@ -100,7 +100,17 @@ REPEAT_BRIEF           = YES
 # "The $name file" "is" "provides" "specifies" "contains"
 # "represents" "a" "an" "the"
 
-ABBREVIATE_BRIEF       =
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
 
 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
 # Doxygen will generate a detailed section even if there is only a brief
@@ -143,7 +153,7 @@ STRIP_FROM_INC_PATH    =
 # (but less readable) file names. This can be useful if your file system
 # doesn't support long names like on DOS, Mac, or CD-ROM.
 
-SHORT_NAMES            = NO
+SHORT_NAMES            = YES
 
 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
 # will interpret the first line (until the first dot) of a JavaDoc-style
@@ -184,7 +194,7 @@ SEPARATE_MEMBER_PAGES  = NO
 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
 # Doxygen uses this value to replace tabs by spaces in code fragments.
 
-TAB_SIZE               = 8
+TAB_SIZE               = 4
 
 # This tag can be used to specify a number of aliases that acts
 # as commands in the documentation. An alias has the form "name=value".
@@ -207,7 +217,7 @@ TCL_SUBST              =
 # For instance, some of the names that are used will be different. The list
 # of all members will be omitted, etc.
 
-OPTIMIZE_OUTPUT_FOR_C  = NO
+OPTIMIZE_OUTPUT_FOR_C  = YES
 
 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
 # sources only. Doxygen will then generate output that is more tailored for
@@ -355,12 +365,12 @@ LOOKUP_CACHE_SIZE      = 0
 # Private class members and static file members will be hidden unless
 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
 
-EXTRACT_ALL            = NO
+EXTRACT_ALL            = YES
 
 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
 # will be included in the documentation.
 
-EXTRACT_PRIVATE        = NO
+EXTRACT_PRIVATE        = YES
 
 # If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
 
@@ -369,7 +379,7 @@ EXTRACT_PACKAGE        = NO
 # If the EXTRACT_STATIC tag is set to YES all static members of a file
 # will be included in the documentation.
 
-EXTRACT_STATIC         = NO
+EXTRACT_STATIC         = YES
 
 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
 # defined locally in source files will be included in the documentation.
@@ -512,19 +522,19 @@ STRICT_PROTO_MATCHING  = NO
 # disable (NO) the todo list. This list is created by putting \todo
 # commands in the documentation.
 
-GENERATE_TODOLIST      = YES
+GENERATE_TODOLIST      = NO
 
 # The GENERATE_TESTLIST tag can be used to enable (YES) or
 # disable (NO) the test list. This list is created by putting \test
 # commands in the documentation.
 
-GENERATE_TESTLIST      = YES
+GENERATE_TESTLIST      = NO
 
 # The GENERATE_BUGLIST tag can be used to enable (YES) or
 # disable (NO) the bug list. This list is created by putting \bug
 # commands in the documentation.
 
-GENERATE_BUGLIST       = YES
+GENERATE_BUGLIST       = NO
 
 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
 # disable (NO) the deprecated list. This list is created by putting
@@ -557,7 +567,7 @@ SHOW_USED_FILES        = YES
 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
 # in the documentation. The default is NO.
 
-SHOW_DIRECTORIES       = NO
+SHOW_DIRECTORIES       = YES
 
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
@@ -608,7 +618,7 @@ CITE_BIB_FILES         =
 # The QUIET tag can be used to turn on/off the messages that are generated
 # by doxygen. Possible values are YES and NO. If left blank NO is used.
 
-QUIET                  = NO
+QUIET                  = YES
 
 # The WARNINGS tag can be used to turn on/off the warning messages that are
 # generated by doxygen. Possible values are YES and NO. If left blank
@@ -635,7 +645,7 @@ WARN_IF_DOC_ERROR      = YES
 # wrong or incomplete parameter documentation, but not about the absence of
 # documentation.
 
-WARN_NO_PARAMDOC       = NO
+WARN_NO_PARAMDOC       = YES
 
 # The WARN_FORMAT tag determines the format of the warning messages that
 # doxygen can produce. The string should contain the $file, $line, and $text
@@ -661,7 +671,7 @@ WARN_LOGFILE           =
 # directories like "/usr/src/myproject". Separate the files or directories
 # with spaces.
 
-INPUT                  =
+INPUT                  = ./
 
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
@@ -679,13 +689,15 @@ INPUT_ENCODING         = UTF-8
 # *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
 # *.f90 *.f *.for *.vhd *.vhdl
 
-FILE_PATTERNS          =
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
 
 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
 # should be searched for input files as well. Possible values are YES and NO.
 # If left blank NO is used.
 
-RECURSIVE              = NO
+RECURSIVE              = YES
 
 # The EXCLUDE tag can be used to specify files and/or directories that should be
 # excluded from the INPUT source files. This way you can easily exclude a
@@ -693,7 +705,7 @@ RECURSIVE              = NO
 # Note that relative paths are relative to the directory from which doxygen is
 # run.
 
-EXCLUDE                =
+EXCLUDE                = Documentation/
 
 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
 # directories that are symbolic links (a Unix file system feature) are excluded
@@ -715,7 +727,8 @@ EXCLUDE_PATTERNS       =
 # wildcard * is used, a substring. Examples: ANamespace, AClass,
 # AClass::ANamespace, ANamespace::*Test
 
-EXCLUDE_SYMBOLS        =
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
 
 # The EXAMPLE_PATH tag can be used to specify one or more files or
 # directories that contain example code fragments that are included (see
@@ -728,7 +741,7 @@ EXAMPLE_PATH           =
 # and *.h) to filter out the source-files in the directories. If left
 # blank all files are included.
 
-EXAMPLE_PATTERNS       =
+EXAMPLE_PATTERNS       = *
 
 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
 # searched for input files to be used with the \include or \dontinclude
@@ -819,7 +832,7 @@ REFERENCES_RELATION    = NO
 # link to the source code.
 # Otherwise they will link to the documentation.
 
-REFERENCES_LINK_SOURCE = YES
+REFERENCES_LINK_SOURCE = NO
 
 # If the USE_HTAGS tag is set to YES then the references to source code
 # will point to the HTML generated by the htags(1) tool instead of doxygen
@@ -833,7 +846,7 @@ USE_HTAGS              = NO
 # will generate a verbatim copy of the header file for each class for
 # which an include is specified. Set to NO to disable this.
 
-VERBATIM_HEADERS       = YES
+VERBATIM_HEADERS       = NO
 
 #---------------------------------------------------------------------------
 # configuration options related to the alphabetical class index
@@ -945,7 +958,7 @@ HTML_COLORSTYLE_GAMMA  = 80
 # page will contain the date and time when the page was generated. Setting
 # this to NO can help when comparing the output of multiple runs.
 
-HTML_TIMESTAMP         = YES
+HTML_TIMESTAMP         = NO
 
 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
 # files or namespaces will be aligned in HTML using tables. If set to
@@ -959,7 +972,7 @@ HTML_ALIGN_MEMBERS     = YES
 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
 
-HTML_DYNAMIC_SECTIONS  = NO
+HTML_DYNAMIC_SECTIONS  = YES
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
@@ -1040,7 +1053,7 @@ BINARY_TOC             = NO
 # The TOC_EXPAND flag can be set to YES to add extra items for group members
 # to the contents of the HTML help documentation and to the tree view.
 
-TOC_EXPAND             = NO
+TOC_EXPAND             = YES
 
 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
@@ -1130,14 +1143,14 @@ DISABLE_INDEX          = NO
 # Since the tree basically has the same information as the tab index you
 # could consider to set DISABLE_INDEX to NO when enabling this option.
 
-GENERATE_TREEVIEW      = NO
+GENERATE_TREEVIEW      = YES
 
 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
 # (range [0,1..20]) that doxygen will group on one line in the generated HTML
 # documentation. Note that a value of 0 will completely suppress the enum
 # values from appearing in the overview section.
 
-ENUM_VALUES_PER_LINE   = 4
+ENUM_VALUES_PER_LINE   = 1
 
 # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
 # and Class Hierarchy pages using a tree view instead of an ordered list.
@@ -1205,7 +1218,7 @@ MATHJAX_EXTENSIONS     =
 # typically be disabled. For large projects the javascript based search engine
 # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
 
-SEARCHENGINE           = YES
+SEARCHENGINE           = NO
 
 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
 # implemented using a PHP enabled web server instead of at the web client
@@ -1224,7 +1237,7 @@ SERVER_BASED_SEARCH    = NO
 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
 # generate Latex output.
 
-GENERATE_LATEX         = YES
+GENERATE_LATEX         = NO
 
 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
@@ -1256,7 +1269,7 @@ COMPACT_LATEX          = NO
 # by the printer. Possible values are: a4, letter, legal and
 # executive. If left blank a4wide will be used.
 
-PAPER_TYPE             = a4
+PAPER_TYPE             = a4wide
 
 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
 # packages that should be included in the LaTeX output.
@@ -1483,13 +1496,13 @@ ENABLE_PREPROCESSING   = YES
 # compilation will be performed. Macro expansion can be done in a controlled
 # way by setting EXPAND_ONLY_PREDEF to YES.
 
-MACRO_EXPANSION        = NO
+MACRO_EXPANSION        = YES
 
 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
 # then the macro expansion is limited to the macros specified with the
 # PREDEFINED and EXPAND_AS_DEFINED tags.
 
-EXPAND_ONLY_PREDEF     = NO
+EXPAND_ONLY_PREDEF     = YES
 
 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
 # pointed to by INCLUDE_PATH will be searched when a #include is found.
@@ -1517,7 +1530,8 @@ INCLUDE_FILE_PATTERNS  =
 # undefined via #undef or recursively expanded use the := operator
 # instead of the = operator.
 
-PREDEFINED             =
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
 
 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
 # this tag can be used to specify a list of macro names that should be expanded.
@@ -1585,7 +1599,7 @@ PERL_PATH              = /usr/bin/perl
 # this option also works with HAVE_DOT disabled, but it is recommended to
 # install and use dot, since it yields more powerful graphs.
 
-CLASS_DIAGRAMS         = YES
+CLASS_DIAGRAMS         = NO
 
 # You can define message sequence charts within doxygen comments using the \msc
 # command. Doxygen will then run the mscgen tool (see
@@ -1624,7 +1638,7 @@ DOT_NUM_THREADS        = 0
 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
 # directory containing the font.
 
-DOT_FONTNAME           = Helvetica
+DOT_FONTNAME           = FreeSans
 
 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
 # The default size is 10pt.
@@ -1642,19 +1656,19 @@ DOT_FONTPATH           =
 # indirect inheritance relations. Setting this tag to YES will force the
 # CLASS_DIAGRAMS tag to NO.
 
-CLASS_GRAPH            = YES
+CLASS_GRAPH            = NO
 
 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for each documented class showing the direct and
 # indirect implementation dependencies (inheritance, containment, and
 # class references variables) of the class with other documented classes.
 
-COLLABORATION_GRAPH    = YES
+COLLABORATION_GRAPH    = NO
 
 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for groups, showing the direct groups dependencies
 
-GROUP_GRAPHS           = YES
+GROUP_GRAPHS           = NO
 
 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
 # collaboration diagrams in a style similar to the OMG's Unified Modeling
@@ -1681,14 +1695,14 @@ TEMPLATE_RELATIONS     = NO
 # file showing the direct and indirect include dependencies of the file with
 # other documented files.
 
-INCLUDE_GRAPH          = YES
+INCLUDE_GRAPH          = NO
 
 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
 # documented header file showing the documented files that directly or
 # indirectly include this file.
 
-INCLUDED_BY_GRAPH      = YES
+INCLUDED_BY_GRAPH      = NO
 
 # If the CALL_GRAPH and HAVE_DOT options are set to YES then
 # doxygen will generate a call dependency graph for every global function
@@ -1709,14 +1723,14 @@ CALLER_GRAPH           = NO
 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
 # will generate a graphical hierarchy of all classes instead of a textual one.
 
-GRAPHICAL_HIERARCHY    = YES
+GRAPHICAL_HIERARCHY    = NO
 
 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
 
-DIRECTORY_GRAPH        = YES
+DIRECTORY_GRAPH        = NO
 
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
 # generated by dot. Possible values are svg, png, jpg, or gif.
@@ -1760,7 +1774,7 @@ MSCFILE_DIRS           =
 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
 
-DOT_GRAPH_MAX_NODES    = 50
+DOT_GRAPH_MAX_NODES    = 15
 
 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
 # graphs generated by dot. A depth value of 3 means that only nodes reachable
@@ -1770,7 +1784,7 @@ DOT_GRAPH_MAX_NODES    = 50
 # code bases. Also note that the size of a graph can be further restricted by
 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
 
-MAX_DOT_GRAPH_DEPTH    = 0
+MAX_DOT_GRAPH_DEPTH    = 2
 
 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
 # background. This is disabled by default, because dot on Windows does not
@@ -1778,7 +1792,7 @@ MAX_DOT_GRAPH_DEPTH    = 0
 # enabling this option may lead to badly anti-aliased labels on the edges of
 # a graph (i.e. they become hard to read).
 
-DOT_TRANSPARENT        = NO
+DOT_TRANSPARENT        = YES
 
 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
 # files in one run (i.e. multiple -o and -T options on the command line). This
diff --git a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf
index bfff60a9b..e12fde772 100644
--- a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf
+++ b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf
@@ -26,13 +26,13 @@ DOXYFILE_ENCODING      = UTF-8
 # identify the project. Note that if you do not use Doxywizard you need
 # to put quotes around the project name if it contains spaces.
 
-PROJECT_NAME           = "My Project"
+PROJECT_NAME           = "LUFA Library - Generic HID Device Demo"
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         =
+PROJECT_NUMBER         = 0.0.0
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -52,7 +52,7 @@ PROJECT_LOGO           =
 # If a relative path is entered, it will be relative to the location
 # where doxygen was started. If left blank the current directory will be used.
 
-OUTPUT_DIRECTORY       =
+OUTPUT_DIRECTORY       = ./Documentation/
 
 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
 # 4096 sub-directories (in 2 levels) under the output directory of each output
@@ -100,7 +100,17 @@ REPEAT_BRIEF           = YES
 # "The $name file" "is" "provides" "specifies" "contains"
 # "represents" "a" "an" "the"
 
-ABBREVIATE_BRIEF       =
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
 
 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
 # Doxygen will generate a detailed section even if there is only a brief
@@ -143,7 +153,7 @@ STRIP_FROM_INC_PATH    =
 # (but less readable) file names. This can be useful if your file system
 # doesn't support long names like on DOS, Mac, or CD-ROM.
 
-SHORT_NAMES            = NO
+SHORT_NAMES            = YES
 
 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
 # will interpret the first line (until the first dot) of a JavaDoc-style
@@ -184,7 +194,7 @@ SEPARATE_MEMBER_PAGES  = NO
 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
 # Doxygen uses this value to replace tabs by spaces in code fragments.
 
-TAB_SIZE               = 8
+TAB_SIZE               = 4
 
 # This tag can be used to specify a number of aliases that acts
 # as commands in the documentation. An alias has the form "name=value".
@@ -207,7 +217,7 @@ TCL_SUBST              =
 # For instance, some of the names that are used will be different. The list
 # of all members will be omitted, etc.
 
-OPTIMIZE_OUTPUT_FOR_C  = NO
+OPTIMIZE_OUTPUT_FOR_C  = YES
 
 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
 # sources only. Doxygen will then generate output that is more tailored for
@@ -355,12 +365,12 @@ LOOKUP_CACHE_SIZE      = 0
 # Private class members and static file members will be hidden unless
 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
 
-EXTRACT_ALL            = NO
+EXTRACT_ALL            = YES
 
 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
 # will be included in the documentation.
 
-EXTRACT_PRIVATE        = NO
+EXTRACT_PRIVATE        = YES
 
 # If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
 
@@ -369,7 +379,7 @@ EXTRACT_PACKAGE        = NO
 # If the EXTRACT_STATIC tag is set to YES all static members of a file
 # will be included in the documentation.
 
-EXTRACT_STATIC         = NO
+EXTRACT_STATIC         = YES
 
 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
 # defined locally in source files will be included in the documentation.
@@ -512,19 +522,19 @@ STRICT_PROTO_MATCHING  = NO
 # disable (NO) the todo list. This list is created by putting \todo
 # commands in the documentation.
 
-GENERATE_TODOLIST      = YES
+GENERATE_TODOLIST      = NO
 
 # The GENERATE_TESTLIST tag can be used to enable (YES) or
 # disable (NO) the test list. This list is created by putting \test
 # commands in the documentation.
 
-GENERATE_TESTLIST      = YES
+GENERATE_TESTLIST      = NO
 
 # The GENERATE_BUGLIST tag can be used to enable (YES) or
 # disable (NO) the bug list. This list is created by putting \bug
 # commands in the documentation.
 
-GENERATE_BUGLIST       = YES
+GENERATE_BUGLIST       = NO
 
 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
 # disable (NO) the deprecated list. This list is created by putting
@@ -557,7 +567,7 @@ SHOW_USED_FILES        = YES
 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
 # in the documentation. The default is NO.
 
-SHOW_DIRECTORIES       = NO
+SHOW_DIRECTORIES       = YES
 
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
@@ -608,7 +618,7 @@ CITE_BIB_FILES         =
 # The QUIET tag can be used to turn on/off the messages that are generated
 # by doxygen. Possible values are YES and NO. If left blank NO is used.
 
-QUIET                  = NO
+QUIET                  = YES
 
 # The WARNINGS tag can be used to turn on/off the warning messages that are
 # generated by doxygen. Possible values are YES and NO. If left blank
@@ -635,7 +645,7 @@ WARN_IF_DOC_ERROR      = YES
 # wrong or incomplete parameter documentation, but not about the absence of
 # documentation.
 
-WARN_NO_PARAMDOC       = NO
+WARN_NO_PARAMDOC       = YES
 
 # The WARN_FORMAT tag determines the format of the warning messages that
 # doxygen can produce. The string should contain the $file, $line, and $text
@@ -661,7 +671,7 @@ WARN_LOGFILE           =
 # directories like "/usr/src/myproject". Separate the files or directories
 # with spaces.
 
-INPUT                  =
+INPUT                  = ./
 
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
@@ -679,13 +689,15 @@ INPUT_ENCODING         = UTF-8
 # *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
 # *.f90 *.f *.for *.vhd *.vhdl
 
-FILE_PATTERNS          =
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
 
 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
 # should be searched for input files as well. Possible values are YES and NO.
 # If left blank NO is used.
 
-RECURSIVE              = NO
+RECURSIVE              = YES
 
 # The EXCLUDE tag can be used to specify files and/or directories that should be
 # excluded from the INPUT source files. This way you can easily exclude a
@@ -693,7 +705,7 @@ RECURSIVE              = NO
 # Note that relative paths are relative to the directory from which doxygen is
 # run.
 
-EXCLUDE                =
+EXCLUDE                = Documentation/
 
 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
 # directories that are symbolic links (a Unix file system feature) are excluded
@@ -715,7 +727,8 @@ EXCLUDE_PATTERNS       =
 # wildcard * is used, a substring. Examples: ANamespace, AClass,
 # AClass::ANamespace, ANamespace::*Test
 
-EXCLUDE_SYMBOLS        =
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
 
 # The EXAMPLE_PATH tag can be used to specify one or more files or
 # directories that contain example code fragments that are included (see
@@ -728,7 +741,7 @@ EXAMPLE_PATH           =
 # and *.h) to filter out the source-files in the directories. If left
 # blank all files are included.
 
-EXAMPLE_PATTERNS       =
+EXAMPLE_PATTERNS       = *
 
 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
 # searched for input files to be used with the \include or \dontinclude
@@ -819,7 +832,7 @@ REFERENCES_RELATION    = NO
 # link to the source code.
 # Otherwise they will link to the documentation.
 
-REFERENCES_LINK_SOURCE = YES
+REFERENCES_LINK_SOURCE = NO
 
 # If the USE_HTAGS tag is set to YES then the references to source code
 # will point to the HTML generated by the htags(1) tool instead of doxygen
@@ -833,7 +846,7 @@ USE_HTAGS              = NO
 # will generate a verbatim copy of the header file for each class for
 # which an include is specified. Set to NO to disable this.
 
-VERBATIM_HEADERS       = YES
+VERBATIM_HEADERS       = NO
 
 #---------------------------------------------------------------------------
 # configuration options related to the alphabetical class index
@@ -945,7 +958,7 @@ HTML_COLORSTYLE_GAMMA  = 80
 # page will contain the date and time when the page was generated. Setting
 # this to NO can help when comparing the output of multiple runs.
 
-HTML_TIMESTAMP         = YES
+HTML_TIMESTAMP         = NO
 
 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
 # files or namespaces will be aligned in HTML using tables. If set to
@@ -959,7 +972,7 @@ HTML_ALIGN_MEMBERS     = YES
 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
 
-HTML_DYNAMIC_SECTIONS  = NO
+HTML_DYNAMIC_SECTIONS  = YES
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
@@ -1040,7 +1053,7 @@ BINARY_TOC             = NO
 # The TOC_EXPAND flag can be set to YES to add extra items for group members
 # to the contents of the HTML help documentation and to the tree view.
 
-TOC_EXPAND             = NO
+TOC_EXPAND             = YES
 
 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
@@ -1130,14 +1143,14 @@ DISABLE_INDEX          = NO
 # Since the tree basically has the same information as the tab index you
 # could consider to set DISABLE_INDEX to NO when enabling this option.
 
-GENERATE_TREEVIEW      = NO
+GENERATE_TREEVIEW      = YES
 
 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
 # (range [0,1..20]) that doxygen will group on one line in the generated HTML
 # documentation. Note that a value of 0 will completely suppress the enum
 # values from appearing in the overview section.
 
-ENUM_VALUES_PER_LINE   = 4
+ENUM_VALUES_PER_LINE   = 1
 
 # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
 # and Class Hierarchy pages using a tree view instead of an ordered list.
@@ -1205,7 +1218,7 @@ MATHJAX_EXTENSIONS     =
 # typically be disabled. For large projects the javascript based search engine
 # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
 
-SEARCHENGINE           = YES
+SEARCHENGINE           = NO
 
 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
 # implemented using a PHP enabled web server instead of at the web client
@@ -1224,7 +1237,7 @@ SERVER_BASED_SEARCH    = NO
 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
 # generate Latex output.
 
-GENERATE_LATEX         = YES
+GENERATE_LATEX         = NO
 
 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
@@ -1256,7 +1269,7 @@ COMPACT_LATEX          = NO
 # by the printer. Possible values are: a4, letter, legal and
 # executive. If left blank a4wide will be used.
 
-PAPER_TYPE             = a4
+PAPER_TYPE             = a4wide
 
 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
 # packages that should be included in the LaTeX output.
@@ -1483,13 +1496,13 @@ ENABLE_PREPROCESSING   = YES
 # compilation will be performed. Macro expansion can be done in a controlled
 # way by setting EXPAND_ONLY_PREDEF to YES.
 
-MACRO_EXPANSION        = NO
+MACRO_EXPANSION        = YES
 
 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
 # then the macro expansion is limited to the macros specified with the
 # PREDEFINED and EXPAND_AS_DEFINED tags.
 
-EXPAND_ONLY_PREDEF     = NO
+EXPAND_ONLY_PREDEF     = YES
 
 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
 # pointed to by INCLUDE_PATH will be searched when a #include is found.
@@ -1517,7 +1530,8 @@ INCLUDE_FILE_PATTERNS  =
 # undefined via #undef or recursively expanded use the := operator
 # instead of the = operator.
 
-PREDEFINED             =
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
 
 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
 # this tag can be used to specify a list of macro names that should be expanded.
@@ -1585,7 +1599,7 @@ PERL_PATH              = /usr/bin/perl
 # this option also works with HAVE_DOT disabled, but it is recommended to
 # install and use dot, since it yields more powerful graphs.
 
-CLASS_DIAGRAMS         = YES
+CLASS_DIAGRAMS         = NO
 
 # You can define message sequence charts within doxygen comments using the \msc
 # command. Doxygen will then run the mscgen tool (see
@@ -1624,7 +1638,7 @@ DOT_NUM_THREADS        = 0
 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
 # directory containing the font.
 
-DOT_FONTNAME           = Helvetica
+DOT_FONTNAME           = FreeSans
 
 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
 # The default size is 10pt.
@@ -1642,19 +1656,19 @@ DOT_FONTPATH           =
 # indirect inheritance relations. Setting this tag to YES will force the
 # CLASS_DIAGRAMS tag to NO.
 
-CLASS_GRAPH            = YES
+CLASS_GRAPH            = NO
 
 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for each documented class showing the direct and
 # indirect implementation dependencies (inheritance, containment, and
 # class references variables) of the class with other documented classes.
 
-COLLABORATION_GRAPH    = YES
+COLLABORATION_GRAPH    = NO
 
 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for groups, showing the direct groups dependencies
 
-GROUP_GRAPHS           = YES
+GROUP_GRAPHS           = NO
 
 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
 # collaboration diagrams in a style similar to the OMG's Unified Modeling
@@ -1681,14 +1695,14 @@ TEMPLATE_RELATIONS     = NO
 # file showing the direct and indirect include dependencies of the file with
 # other documented files.
 
-INCLUDE_GRAPH          = YES
+INCLUDE_GRAPH          = NO
 
 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
 # documented header file showing the documented files that directly or
 # indirectly include this file.
 
-INCLUDED_BY_GRAPH      = YES
+INCLUDED_BY_GRAPH      = NO
 
 # If the CALL_GRAPH and HAVE_DOT options are set to YES then
 # doxygen will generate a call dependency graph for every global function
@@ -1709,14 +1723,14 @@ CALLER_GRAPH           = NO
 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
 # will generate a graphical hierarchy of all classes instead of a textual one.
 
-GRAPHICAL_HIERARCHY    = YES
+GRAPHICAL_HIERARCHY    = NO
 
 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
 
-DIRECTORY_GRAPH        = YES
+DIRECTORY_GRAPH        = NO
 
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
 # generated by dot. Possible values are svg, png, jpg, or gif.
@@ -1760,7 +1774,7 @@ MSCFILE_DIRS           =
 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
 
-DOT_GRAPH_MAX_NODES    = 50
+DOT_GRAPH_MAX_NODES    = 15
 
 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
 # graphs generated by dot. A depth value of 3 means that only nodes reachable
@@ -1770,7 +1784,7 @@ DOT_GRAPH_MAX_NODES    = 50
 # code bases. Also note that the size of a graph can be further restricted by
 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
 
-MAX_DOT_GRAPH_DEPTH    = 0
+MAX_DOT_GRAPH_DEPTH    = 2
 
 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
 # background. This is disabled by default, because dot on Windows does not
@@ -1778,7 +1792,7 @@ MAX_DOT_GRAPH_DEPTH    = 0
 # enabling this option may lead to badly anti-aliased labels on the edges of
 # a graph (i.e. they become hard to read).
 
-DOT_TRANSPARENT        = NO
+DOT_TRANSPARENT        = YES
 
 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
 # files in one run (i.e. multiple -o and -T options on the command line). This
diff --git a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf
index 17eea5371..3557860c3 100644
--- a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf
+++ b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf
@@ -958,7 +958,7 @@ HTML_COLORSTYLE_GAMMA  = 80
 # page will contain the date and time when the page was generated. Setting
 # this to NO can help when comparing the output of multiple runs.
 
-HTML_TIMESTAMP         = YES
+HTML_TIMESTAMP         = NO
 
 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
 # files or namespaces will be aligned in HTML using tables. If set to
@@ -972,7 +972,7 @@ HTML_ALIGN_MEMBERS     = YES
 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
 
-HTML_DYNAMIC_SECTIONS  = NO
+HTML_DYNAMIC_SECTIONS  = YES
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
@@ -1053,7 +1053,7 @@ BINARY_TOC             = NO
 # The TOC_EXPAND flag can be set to YES to add extra items for group members
 # to the contents of the HTML help documentation and to the tree view.
 
-TOC_EXPAND             = NO
+TOC_EXPAND             = YES
 
 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
@@ -1143,14 +1143,14 @@ DISABLE_INDEX          = NO
 # Since the tree basically has the same information as the tab index you
 # could consider to set DISABLE_INDEX to NO when enabling this option.
 
-GENERATE_TREEVIEW      = NO
+GENERATE_TREEVIEW      = YES
 
 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
 # (range [0,1..20]) that doxygen will group on one line in the generated HTML
 # documentation. Note that a value of 0 will completely suppress the enum
 # values from appearing in the overview section.
 
-ENUM_VALUES_PER_LINE   = 4
+ENUM_VALUES_PER_LINE   = 1
 
 # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
 # and Class Hierarchy pages using a tree view instead of an ordered list.
@@ -1218,7 +1218,7 @@ MATHJAX_EXTENSIONS     =
 # typically be disabled. For large projects the javascript based search engine
 # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
 
-SEARCHENGINE           = YES
+SEARCHENGINE           = NO
 
 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
 # implemented using a PHP enabled web server instead of at the web client
@@ -1237,7 +1237,7 @@ SERVER_BASED_SEARCH    = NO
 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
 # generate Latex output.
 
-GENERATE_LATEX         = YES
+GENERATE_LATEX         = NO
 
 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
@@ -1269,7 +1269,7 @@ COMPACT_LATEX          = NO
 # by the printer. Possible values are: a4, letter, legal and
 # executive. If left blank a4wide will be used.
 
-PAPER_TYPE             = a4
+PAPER_TYPE             = a4wide
 
 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
 # packages that should be included in the LaTeX output.
@@ -1496,13 +1496,13 @@ ENABLE_PREPROCESSING   = YES
 # compilation will be performed. Macro expansion can be done in a controlled
 # way by setting EXPAND_ONLY_PREDEF to YES.
 
-MACRO_EXPANSION        = NO
+MACRO_EXPANSION        = YES
 
 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
 # then the macro expansion is limited to the macros specified with the
 # PREDEFINED and EXPAND_AS_DEFINED tags.
 
-EXPAND_ONLY_PREDEF     = NO
+EXPAND_ONLY_PREDEF     = YES
 
 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
 # pointed to by INCLUDE_PATH will be searched when a #include is found.
@@ -1530,7 +1530,8 @@ INCLUDE_FILE_PATTERNS  =
 # undefined via #undef or recursively expanded use the := operator
 # instead of the = operator.
 
-PREDEFINED             =
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
 
 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
 # this tag can be used to specify a list of macro names that should be expanded.
@@ -1598,7 +1599,7 @@ PERL_PATH              = /usr/bin/perl
 # this option also works with HAVE_DOT disabled, but it is recommended to
 # install and use dot, since it yields more powerful graphs.
 
-CLASS_DIAGRAMS         = YES
+CLASS_DIAGRAMS         = NO
 
 # You can define message sequence charts within doxygen comments using the \msc
 # command. Doxygen will then run the mscgen tool (see
@@ -1637,7 +1638,7 @@ DOT_NUM_THREADS        = 0
 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
 # directory containing the font.
 
-DOT_FONTNAME           = Helvetica
+DOT_FONTNAME           = FreeSans
 
 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
 # The default size is 10pt.
@@ -1655,19 +1656,19 @@ DOT_FONTPATH           =
 # indirect inheritance relations. Setting this tag to YES will force the
 # CLASS_DIAGRAMS tag to NO.
 
-CLASS_GRAPH            = YES
+CLASS_GRAPH            = NO
 
 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for each documented class showing the direct and
 # indirect implementation dependencies (inheritance, containment, and
 # class references variables) of the class with other documented classes.
 
-COLLABORATION_GRAPH    = YES
+COLLABORATION_GRAPH    = NO
 
 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
 # will generate a graph for groups, showing the direct groups dependencies
 
-GROUP_GRAPHS           = YES
+GROUP_GRAPHS           = NO
 
 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
 # collaboration diagrams in a style similar to the OMG's Unified Modeling
@@ -1694,14 +1695,14 @@ TEMPLATE_RELATIONS     = NO
 # file showing the direct and indirect include dependencies of the file with
 # other documented files.
 
-INCLUDE_GRAPH          = YES
+INCLUDE_GRAPH          = NO
 
 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
 # documented header file showing the documented files that directly or
 # indirectly include this file.
 
-INCLUDED_BY_GRAPH      = YES
+INCLUDED_BY_GRAPH      = NO
 
 # If the CALL_GRAPH and HAVE_DOT options are set to YES then
 # doxygen will generate a call dependency graph for every global function
@@ -1722,14 +1723,14 @@ CALLER_GRAPH           = NO
 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
 # will generate a graphical hierarchy of all classes instead of a textual one.
 
-GRAPHICAL_HIERARCHY    = YES
+GRAPHICAL_HIERARCHY    = NO
 
 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
 
-DIRECTORY_GRAPH        = YES
+DIRECTORY_GRAPH        = NO
 
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
 # generated by dot. Possible values are svg, png, jpg, or gif.
@@ -1773,7 +1774,7 @@ MSCFILE_DIRS           =
 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
 
-DOT_GRAPH_MAX_NODES    = 50
+DOT_GRAPH_MAX_NODES    = 15
 
 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
 # graphs generated by dot. A depth value of 3 means that only nodes reachable
@@ -1783,7 +1784,7 @@ DOT_GRAPH_MAX_NODES    = 50
 # code bases. Also note that the size of a graph can be further restricted by
 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
 
-MAX_DOT_GRAPH_DEPTH    = 0
+MAX_DOT_GRAPH_DEPTH    = 2
 
 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
 # background. This is disabled by default, because dot on Windows does not
@@ -1791,7 +1792,7 @@ MAX_DOT_GRAPH_DEPTH    = 0
 # enabling this option may lead to badly anti-aliased labels on the edges of
 # a graph (i.e. they become hard to read).
 
-DOT_TRANSPARENT        = NO
+DOT_TRANSPARENT        = YES
 
 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
 # files in one run (i.e. multiple -o and -T options on the command line). This