Add Host mode Class driver demo summaries.

3 files changed, 199 insertions, 0 deletions

diff --git a/Demos/Host/ClassDriver/CDCHost/CDCHost.txt b/Demos/Host/ClassDriver/CDCHost/CDCHost.txt
new file mode 100644
index 000000000..58469ab45
--- /dev/null
+++ b/Demos/Host/ClassDriver/CDCHost/CDCHost.txt
@@ -0,0 +1,66 @@
+/** \file

+ *

+ *  This file contains special DoxyGen information for the generation of the main page and other special

+ *  documentation pages. It is not a project source file.

+ */

+ 

+/** \mainpage CDC Host Demo

+ *

+ *  \section SSec_Compat Demo Compatibility:

+ *

+ *  The following table indicates what microcontrollers are compatible with this demo.

+ *

+ *  - AT90USB1287

+ *  - AT90USB647

+ *

+ *  \section SSec_Info USB Information:

+ *

+ *  The following table gives a rundown of the USB utilization of this demo.

+ *

+ *  <table>

+ *   <tr>

+ *    <td><b>USB Mode:</b></td>

+ *    <td>Host</td>

+ *   </tr>

+ *   <tr>

+ *    <td><b>USB Class:</b></td>

+ *    <td>Communications Device Class (CDC)</td>

+ *   </tr>

+ *   <tr> 

+ *    <td><b>USB Subclass:</b></td>

+ *    <td>Abstract Control Model (ACM)</td>

+ *   </tr>

+ *   <tr>

+ *    <td><b>Relevant Standards:</b></td>

+ *    <td>USBIF CDC Class Standard</td>

+ *   </tr>

+ *   <tr>

+ *    <td><b>Usable Speeds:</b></td>

+ *    <td>Full Speed Mode</td>

+ *   </tr>

+ *  </table>

+ *

+ *  \section SSec_Description Project Description: 

+ *

+ *  CDC host demonstration application. This gives a simple reference application

+ *  for implementing a USB CDC host, for CDC devices using the standard ACM profile.

+ *  

+ *  This demo prints out received CDC data through the serial port.

+ *  

+ *  Not that this demo is only compatible with devices which report the correct CDC

+ *  and ACM class, subclass and protocol values. Most USB-Serial cables have vendor

+ *  specific features, thus use vendor-specific class/subclass/protocol codes to force

+ *  the user to use specialized drivers. This demo is not compatible with such devices.

+ *

+ *  \section SSec_Options Project Options

+ *

+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

+ *

+ *  <table>

+ *   <tr>

+ *    <td>

+ *     None

+ *    </td>

+ *   </tr>

+ *  </table>

+ */

diff --git a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
new file mode 100644
index 000000000..5872d1947
--- /dev/null
+++ b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
@@ -0,0 +1,68 @@
+/** \file

+ *

+ *  This file contains special DoxyGen information for the generation of the main page and other special

+ *  documentation pages. It is not a project source file.

+ */

+ 

+/** \mainpage Mass Storage Host Demo

+ *

+ *  \section SSec_Compat Demo Compatibility:

+ *

+ *  The following table indicates what microcontrollers are compatible with this demo.

+ *

+ *  - AT90USB1287

+ *  - AT90USB647

+ *

+ *  \section SSec_Info USB Information:

+ *

+ *  The following table gives a rundown of the USB utilization of this demo.

+ *

+ *  <table>

+ *   <tr>

+ *    <td><b>USB Mode:</b></td>

+ *    <td>Host</td>

+ *   </tr>

+ *   <tr>

+ *    <td><b>USB Class:</b></td>

+ *    <td>Mass Storage Device</td>

+ *   </tr>

+ *   <tr> 

+ *    <td><b>USB Subclass:</b></td>

+ *    <td>Bulk Only</td>

+ *   </tr>

+ *   <tr>

+ *    <td><b>Relevant Standards:</b></td>

+ *    <td>USBIF Mass Storage Standard</td>

+ *    <td>USB Bulk-Only Transport Standard</td>

+ *    <td>SCSI Primary Commands Specification</td>

+ *    <td>SCSI Block Commands Specification</td>

+ *   </tr>

+ *   <tr>

+ *    <td><b>Usable Speeds:</b></td>

+ *    <td>Full Speed Mode</td>

+ *   </tr>

+ *  </table>

+ *

+ *  \section SSec_Description Project Description: 

+ *

+ *  Mass Storage host demonstration application. This gives a simple reference

+ *  application for implementing a USB Mass Storage host, for USB storage devices

+ *  using the standard Mass Storage USB profile.

+ *  

+ *  The first 512 bytes (boot sector) of an attached disk's memory will be dumped

+ *  out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287

+ *  AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents

+ *  of the disk will be dumped to the serial port.

+ *

+ *  \section SSec_Options Project Options

+ *

+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

+ *

+ *  <table>

+ *   <tr>

+ *    <td>

+ *     None

+ *    </td>

+ *   </tr>

+ *  </table>

+ */
\ No newline at end of file
diff --git a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt
new file mode 100644
index 000000000..776e1a49c
--- /dev/null
+++ b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt
@@ -0,0 +1,65 @@
+/** \file

+ *

+ *  This file contains special DoxyGen information for the generation of the main page and other special

+ *  documentation pages. It is not a project source file.

+ */

+ 

+/** \mainpage Still Image Host Demo

+ *

+ *  \section SSec_Compat Demo Compatibility:

+ *

+ *  The following table indicates what microcontrollers are compatible with this demo.

+ *

+ *  - AT90USB1287

+ *  - AT90USB647

+ *

+ *  \section SSec_Info USB Information:

+ *

+ *  The following table gives a rundown of the USB utilization of this demo.

+ *

+ *  <table>

+ *   <tr>

+ *    <td><b>USB Mode:</b></td>

+ *    <td>Host</td>

+ *   </tr>

+ *   <tr>

+ *    <td><b>USB Class:</b></td>

+ *    <td>Still Image Device</td>

+ *   </tr>

+ *   <tr> 

+ *    <td><b>USB Subclass:</b></td>

+ *    <td>N/A</td>

+ *   </tr>

+ *   <tr>

+ *    <td><b>Relevant Standards:</b></td>

+ *    <td>USBIF Still Image Class Specification</td>

+ *    <td>PIMA 15740 Specification</td>

+ *   </tr>

+ *   <tr>

+ *    <td><b>Usable Speeds:</b></td>

+ *    <td>Full Speed Mode</td>

+ *   </tr>

+ *  </table>

+ *

+ *  \section SSec_Description Project Description: 

+ *

+ *  Still Image host demonstration application. This gives a simple reference

+ *  application for implementing a Still Image host, for USB devices such as

+ *  digital cameras.

+ *  

+ *  This demo will enumerate an attached USB Still Image device, print out its

+ *  information structure, open a session with the device and finally close the

+ *  session.

+ *

+ *  \section SSec_Options Project Options

+ *

+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

+ *

+ *  <table>

+ *   <tr>

+ *    <td>

+ *     None

+ *    </td>

+ *   </tr>

+ *  </table>

+ */
\ No newline at end of file