Add missing SVN eol-style properties to source files to prevent mixed end-of-line characters.

32 files changed, 14354 insertions, 14354 deletions

diff --git a/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c b/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c
index fbf510224..21bb9e16d 100644
--- a/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c
+++ b/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c
@@ -1,248 +1,248 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Main source file for the AudioInputHost demo. This file contains the main tasks of

- *  the demo and is responsible for the initial application hardware configuration.

- */

-

-#include "AudioInputHost.h"

-

-/** LUFA Audio Class driver interface configuration and state information. This structure is

- *  passed to all Audio Class driver functions, so that multiple instances of the same class

- *  within a device can be differentiated from one another.

- */

-USB_ClassInfo_Audio_Host_t Microphone_Audio_Interface =

-	{

-		.Config =

-			{

-				.DataINPipeNumber = 1,

-			},

-	};

-

-

-/** Main program entry point. This routine configures the hardware required by the application, then

- *  enters a loop to run the application tasks in sequence.

- */

-int main(void)

-{

-	SetupHardware();

-

-	puts_P(PSTR(ESC_FG_CYAN "Audio Input Host Demo running.\r\n" ESC_FG_WHITE));

-

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-	sei();

-

-	for (;;)

-	{

-		switch (USB_HostState)

-		{

-			case HOST_STATE_Addressed:

-				LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);

-

-				uint16_t ConfigDescriptorSize;

-				uint8_t  ConfigDescriptorData[512];

-

-				if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,

-				                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)

-				{

-					puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));

-					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-					USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-					break;

-				}

-

-				if (Audio_Host_ConfigurePipes(&Microphone_Audio_Interface,

-				                              ConfigDescriptorSize, ConfigDescriptorData) != AUDIO_ENUMERROR_NoError)

-				{

-					puts_P(PSTR("Attached Device Not a Valid Audio Input Device.\r\n"));

-					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-					USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-					break;

-				}

-

-				if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)

-				{

-					puts_P(PSTR("Error Setting Device Configuration.\r\n"));

-					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-					USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-					break;

-				}

-

-				if (Audio_Host_StartStopStreaming(&Microphone_Audio_Interface, true) != HOST_SENDCONTROL_Successful)

-				{

-					puts_P(PSTR("Error Enabling Audio Stream.\r\n"));

-					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-					USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-					break;

-				}

-			

-				USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);

-				if (Audio_Host_GetSetEndpointProperty(&Microphone_Audio_Interface, Microphone_Audio_Interface.Config.DataINPipeNumber,

-				                                      AUDIO_REQ_SetCurrent, AUDIO_EPCONTROL_SamplingFreq,

-				                                      sizeof(SampleRate), &SampleRate) != HOST_SENDCONTROL_Successful)

-				{

-					puts_P(PSTR("Error Setting Audio Sampling Frequency.\r\n"));

-					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-					USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-					break;				

-				}

-

-				/* Sample reload timer initialization */

-				TIMSK0  = (1 << OCIE0A);

-				OCR0A   = ((F_CPU / 8 / 48000) - 1);

-				TCCR0A  = (1 << WGM01);  // CTC mode

-				TCCR0B  = (1 << CS01);   // Fcpu/8 speed	

-

-				/* Set speaker as output */

-				DDRC   |= (1 << 6);

-

-				/* PWM speaker timer initialization */

-				TCCR3A  = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)); // Set on match, clear on TOP

-				TCCR3B  = ((1 << WGM32) | (1 << CS30));  // Fast 8-Bit PWM, F_CPU speed

-

-				puts_P(PSTR("Audio Device Enumerated.\r\n"));

-				LEDs_SetAllLEDs(LEDMASK_USB_READY);

-				USB_HostState = HOST_STATE_Configured;

-				break;

-			case HOST_STATE_Configured:

-				/* Do nothing - audio stream is handled by the timer interrupt routine */

-				break;

-		}

-

-		Audio_Host_USBTask(&Microphone_Audio_Interface);

-		USB_USBTask();

-	}

-}

-

-/** ISR to handle the reloading of the PWM timer with the next sample. */

-ISR(TIMER0_COMPA_vect, ISR_BLOCK)

-{

-	uint8_t PrevPipe = Pipe_GetCurrentPipe();

-

-	/* Check that the USB bus is ready for the next sample to read */

-	if (Audio_Host_IsSampleReceived(&Microphone_Audio_Interface))

-	{

-		/* Retrieve the signed 16-bit audio sample, convert to 8-bit */

-		int8_t Sample_8Bit = (Audio_Host_ReadSample16(&Microphone_Audio_Interface) >> 8);

-

-		/* Load the sample into the PWM timer channel */

-		OCR3A = (Sample_8Bit ^ (1 << 7));

-

-		uint8_t LEDMask = LEDS_NO_LEDS;

-

-		/* Turn on LEDs as the sample amplitude increases */

-		if (Sample_8Bit > 16)

-		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4);

-		else if (Sample_8Bit > 8)

-		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3);

-		else if (Sample_8Bit > 4)

-		  LEDMask = (LEDS_LED1 | LEDS_LED2);

-		else if (Sample_8Bit > 2)

-		  LEDMask = (LEDS_LED1);

-

-		LEDs_SetAllLEDs(LEDMask);

-	}

-	

-	Pipe_SelectPipe(PrevPipe);

-}

-

-/** Configures the board hardware and chip peripherals for the demo's functionality. */

-void SetupHardware(void)

-{

-	/* Disable watchdog if enabled by bootloader/fuses */

-	MCUSR &= ~(1 << WDRF);

-	wdt_disable();

-

-	/* Disable clock division */

-	clock_prescale_set(clock_div_1);

-

-	/* Hardware Initialization */

-	Serial_Init(9600, false);

-	LEDs_Init();

-	USB_Init();

-

-	/* Create a stdio stream for the serial port for stdin and stdout */

-	Serial_CreateStream(NULL);

-}

-

-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and

- *  starts the library USB task to begin the enumeration and USB management process.

- */

-void EVENT_USB_Host_DeviceAttached(void)

-{

-	puts_P(PSTR("Device Attached.\r\n"));

-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);

-}

-

-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and

- *  stops the library USB task management process.

- */

-void EVENT_USB_Host_DeviceUnattached(void)

-{

-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-}

-

-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully

- *  enumerated by the host and is now ready to be used by the application.

- */

-void EVENT_USB_Host_DeviceEnumerationComplete(void)

-{

-	LEDs_SetAllLEDs(LEDMASK_USB_READY);

-}

-

-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */

-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)

-{

-	USB_Disable();

-

-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"

-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-	for(;;);

-}

-

-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while

- *  enumerating an attached USB device.

- */

-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,

-                                            const uint8_t SubErrorCode)

-{

-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"

-	                         " -- Error Code %d\r\n"

-	                         " -- Sub Error Code %d\r\n"

-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-}

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the AudioInputHost demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "AudioInputHost.h"
+
+/** LUFA Audio Class driver interface configuration and state information. This structure is
+ *  passed to all Audio Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_Audio_Host_t Microphone_Audio_Interface =
+	{
+		.Config =
+			{
+				.DataINPipeNumber = 1,
+			},
+	};
+
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	puts_P(PSTR(ESC_FG_CYAN "Audio Input Host Demo running.\r\n" ESC_FG_WHITE));
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	sei();
+
+	for (;;)
+	{
+		switch (USB_HostState)
+		{
+			case HOST_STATE_Addressed:
+				LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+				uint16_t ConfigDescriptorSize;
+				uint8_t  ConfigDescriptorData[512];
+
+				if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
+				                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
+				{
+					puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;
+				}
+
+				if (Audio_Host_ConfigurePipes(&Microphone_Audio_Interface,
+				                              ConfigDescriptorSize, ConfigDescriptorData) != AUDIO_ENUMERROR_NoError)
+				{
+					puts_P(PSTR("Attached Device Not a Valid Audio Input Device.\r\n"));
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;
+				}
+
+				if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
+				{
+					puts_P(PSTR("Error Setting Device Configuration.\r\n"));
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;
+				}
+
+				if (Audio_Host_StartStopStreaming(&Microphone_Audio_Interface, true) != HOST_SENDCONTROL_Successful)
+				{
+					puts_P(PSTR("Error Enabling Audio Stream.\r\n"));
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;
+				}
+			
+				USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);
+				if (Audio_Host_GetSetEndpointProperty(&Microphone_Audio_Interface, Microphone_Audio_Interface.Config.DataINPipeNumber,
+				                                      AUDIO_REQ_SetCurrent, AUDIO_EPCONTROL_SamplingFreq,
+				                                      sizeof(SampleRate), &SampleRate) != HOST_SENDCONTROL_Successful)
+				{
+					puts_P(PSTR("Error Setting Audio Sampling Frequency.\r\n"));
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;				
+				}
+
+				/* Sample reload timer initialization */
+				TIMSK0  = (1 << OCIE0A);
+				OCR0A   = ((F_CPU / 8 / 48000) - 1);
+				TCCR0A  = (1 << WGM01);  // CTC mode
+				TCCR0B  = (1 << CS01);   // Fcpu/8 speed	
+
+				/* Set speaker as output */
+				DDRC   |= (1 << 6);
+
+				/* PWM speaker timer initialization */
+				TCCR3A  = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)); // Set on match, clear on TOP
+				TCCR3B  = ((1 << WGM32) | (1 << CS30));  // Fast 8-Bit PWM, F_CPU speed
+
+				puts_P(PSTR("Audio Device Enumerated.\r\n"));
+				LEDs_SetAllLEDs(LEDMASK_USB_READY);
+				USB_HostState = HOST_STATE_Configured;
+				break;
+			case HOST_STATE_Configured:
+				/* Do nothing - audio stream is handled by the timer interrupt routine */
+				break;
+		}
+
+		Audio_Host_USBTask(&Microphone_Audio_Interface);
+		USB_USBTask();
+	}
+}
+
+/** ISR to handle the reloading of the PWM timer with the next sample. */
+ISR(TIMER0_COMPA_vect, ISR_BLOCK)
+{
+	uint8_t PrevPipe = Pipe_GetCurrentPipe();
+
+	/* Check that the USB bus is ready for the next sample to read */
+	if (Audio_Host_IsSampleReceived(&Microphone_Audio_Interface))
+	{
+		/* Retrieve the signed 16-bit audio sample, convert to 8-bit */
+		int8_t Sample_8Bit = (Audio_Host_ReadSample16(&Microphone_Audio_Interface) >> 8);
+
+		/* Load the sample into the PWM timer channel */
+		OCR3A = (Sample_8Bit ^ (1 << 7));
+
+		uint8_t LEDMask = LEDS_NO_LEDS;
+
+		/* Turn on LEDs as the sample amplitude increases */
+		if (Sample_8Bit > 16)
+		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4);
+		else if (Sample_8Bit > 8)
+		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3);
+		else if (Sample_8Bit > 4)
+		  LEDMask = (LEDS_LED1 | LEDS_LED2);
+		else if (Sample_8Bit > 2)
+		  LEDMask = (LEDS_LED1);
+
+		LEDs_SetAllLEDs(LEDMask);
+	}
+	
+	Pipe_SelectPipe(PrevPipe);
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+
+	/* Hardware Initialization */
+	Serial_Init(9600, false);
+	LEDs_Init();
+	USB_Init();
+
+	/* Create a stdio stream for the serial port for stdin and stdout */
+	Serial_CreateStream(NULL);
+}
+
+/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Host_DeviceAttached(void)
+{
+	puts_P(PSTR("Device Attached.\r\n"));
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
+ *  stops the library USB task management process.
+ */
+void EVENT_USB_Host_DeviceUnattached(void)
+{
+	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
+ *  enumerated by the host and is now ready to be used by the application.
+ */
+void EVENT_USB_Host_DeviceEnumerationComplete(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+}
+
+/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
+{
+	USB_Disable();
+
+	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
+	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	for(;;);
+}
+
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
+ *  enumerating an attached USB device.
+ */
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
+                                            const uint8_t SubErrorCode)
+{
+	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
+	                         " -- Error Code %d\r\n"
+	                         " -- Sub Error Code %d\r\n"
+	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+}
+
diff --git a/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.h b/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.h
index bcb517fa3..d4c75c226 100644
--- a/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.h
+++ b/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.h
@@ -1,77 +1,77 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header file for AudioInputHost.c.

- */

-

-#ifndef _AUDIO_INPUT_HOST_H_

-#define _AUDIO_INPUT_HOST_H_

-

-	/* Includes: */

-		#include <avr/io.h>

-		#include <avr/wdt.h>

-		#include <avr/pgmspace.h>

-		#include <avr/power.h>

-		#include <avr/interrupt.h>

-		#include <stdio.h>

-

-		#include <LUFA/Version.h>

-		#include <LUFA/Drivers/Misc/TerminalCodes.h>

-		#include <LUFA/Drivers/Peripheral/Serial.h>

-		#include <LUFA/Drivers/Board/LEDs.h>

-		#include <LUFA/Drivers/USB/USB.h>

-

-	/* Macros: */

-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

-		#define LEDMASK_USB_NOTREADY      LEDS_LED1

-

-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */

-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)

-

-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */

-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)

-

-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */

-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)

-

-	/* Function Prototypes: */

-		void SetupHardware(void);

-

-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);

-		void EVENT_USB_Host_DeviceAttached(void);

-		void EVENT_USB_Host_DeviceUnattached(void);

-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,

-		                                            const uint8_t SubErrorCode);

-		void EVENT_USB_Host_DeviceEnumerationComplete(void);

-

-#endif

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for AudioInputHost.c.
+ */
+
+#ifndef _AUDIO_INPUT_HOST_H_
+#define _AUDIO_INPUT_HOST_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/pgmspace.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdio.h>
+
+		#include <LUFA/Version.h>
+		#include <LUFA/Drivers/Misc/TerminalCodes.h>
+		#include <LUFA/Drivers/Peripheral/Serial.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
+		void EVENT_USB_Host_DeviceAttached(void);
+		void EVENT_USB_Host_DeviceUnattached(void);
+		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
+		                                            const uint8_t SubErrorCode);
+		void EVENT_USB_Host_DeviceEnumerationComplete(void);
+
+#endif
+
diff --git a/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.txt b/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.txt
index 329448af0..11a424271 100644
--- a/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.txt
+++ b/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.txt
@@ -1,66 +1,66 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \mainpage Audio Input Host Demo

- *

- *  \section Sec_Compat Demo Compatibility:

- *

- *  The following list indicates what microcontrollers are compatible with this demo.

- *

- *  - Series 7 USB AVRs (AT90USBxxx7)

- *

- *  \section Sec_Info USB Information:

- *

- *  The following table gives a rundown of the USB utilization of this demo.

- *

- *  <table>

- *   <tr>

- *    <td><b>USB Mode:</b></td>

- *    <td>Host</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Class:</b></td>

- *    <td>Audio Class</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Subclass:</b></td>

- *    <td>Standard Audio Device</td>

- *   </tr>

- *   <tr>

- *    <td><b>Relevant Standards:</b></td>

- *    <td>USBIF Audio 1.0 Class Specification \n

- *        USBIF Audio 1.0 Class Terminal Types Specification \n

- *        USBIF Audio 1.0 Data Formats Specification</td>

- *   </tr>

- *   <tr>

- *    <td><b>Usable Speeds:</b></td>

- *    <td>Full Speed Mode</td>

- *   </tr>

- *  </table>

- *

- *  \section Sec_Description Project Description:

- *

- *  Audio Input host demonstration application. This gives a simple reference

- *  application for implementing a USB Audio host, for USB Audio devices using

- *  the USB Audio 1.0 class profile.

- *

- *  Incoming audio will output in 8-bit PWM onto the timer 3 output compare

- *  channel A, and will also be indicated on the board LEDs. Decouple the PWM

- *  output with a capacitor and attach to a speaker to hear the audio.

- *

- *  \section Sec_Options Project Options

- *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

- *

- *  <table>

- *   <tr>

- *    <td>

- *     None

- *    </td>

- *   </tr>

- *  </table>

- */

-

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Audio Input Host Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  - Series 7 USB AVRs (AT90USBxxx7)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Host</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Audio Class</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Standard Audio Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Audio 1.0 Class Specification \n
+ *        USBIF Audio 1.0 Class Terminal Types Specification \n
+ *        USBIF Audio 1.0 Data Formats Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Usable Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Audio Input host demonstration application. This gives a simple reference
+ *  application for implementing a USB Audio host, for USB Audio devices using
+ *  the USB Audio 1.0 class profile.
+ *
+ *  Incoming audio will output in 8-bit PWM onto the timer 3 output compare
+ *  channel A, and will also be indicated on the board LEDs. Decouple the PWM
+ *  output with a capacitor and attach to a speaker to hear the audio.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf b/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf
index 131ebe5ff..2c43ca9eb 100644
--- a/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf
+++ b/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf
@@ -1,1565 +1,1565 @@
-# Doxyfile 1.6.2

-

-# This file describes the settings to be used by the documentation system

-# doxygen (www.doxygen.org) for a project

-#

-# All text after a hash (#) is considered a comment and will be ignored

-# The format is:

-#       TAG = value [value, ...]

-# For lists items can also be appended using:

-#       TAG += value [value, ...]

-# Values that contain spaces should be placed between quotes (" ")

-

-#---------------------------------------------------------------------------

-# Project related configuration options

-#---------------------------------------------------------------------------

-

-# This tag specifies the encoding used for all characters in the config file

-# that follow. The default is UTF-8 which is also the encoding used for all

-# text before the first occurrence of this tag. Doxygen uses libiconv (or the

-# iconv built into libc) for the transcoding. See

-# http://www.gnu.org/software/libiconv for the list of possible encodings.

-

-DOXYFILE_ENCODING      = UTF-8

-

-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded

-# by quotes) that should identify the project.

-

-PROJECT_NAME           = "LUFA Library - Audio Input Host Demo"

-

-# The PROJECT_NUMBER tag can be used to enter a project or revision number.

-# This could be handy for archiving the generated documentation or

-# if some version control system is used.

-

-PROJECT_NUMBER         = 0.0.0

-

-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)

-# base path where the generated documentation will be put.

-# If a relative path is entered, it will be relative to the location

-# where doxygen was started. If left blank the current directory will be used.

-

-OUTPUT_DIRECTORY       = ./Documentation/

-

-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create

-# 4096 sub-directories (in 2 levels) under the output directory of each output

-# format and will distribute the generated files over these directories.

-# Enabling this option can be useful when feeding doxygen a huge amount of

-# source files, where putting all generated files in the same directory would

-# otherwise cause performance problems for the file system.

-

-CREATE_SUBDIRS         = NO

-

-# The OUTPUT_LANGUAGE tag is used to specify the language in which all

-# documentation generated by doxygen is written. Doxygen will use this

-# information to generate all constant output in the proper language.

-# The default language is English, other supported languages are:

-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,

-# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,

-# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English

-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,

-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,

-# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.

-

-OUTPUT_LANGUAGE        = English

-

-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will

-# include brief member descriptions after the members that are listed in

-# the file and class documentation (similar to JavaDoc).

-# Set to NO to disable this.

-

-BRIEF_MEMBER_DESC      = YES

-

-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend

-# the brief description of a member or function before the detailed description.

-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the

-# brief descriptions will be completely suppressed.

-

-REPEAT_BRIEF           = YES

-

-# This tag implements a quasi-intelligent brief description abbreviator

-# that is used to form the text in various listings. Each string

-# in this list, if found as the leading text of the brief description, will be

-# stripped from the text and the result after processing the whole list, is

-# used as the annotated text. Otherwise, the brief description is used as-is.

-# If left blank, the following values are used ("$name" is automatically

-# replaced with the name of the entity): "The $name class" "The $name widget"

-# "The $name file" "is" "provides" "specifies" "contains"

-# "represents" "a" "an" "the"

-

-ABBREVIATE_BRIEF       = "The $name class" \

-                         "The $name widget" \

-                         "The $name file" \

-                         is \

-                         provides \

-                         specifies \

-                         contains \

-                         represents \

-                         a \

-                         an \

-                         the

-

-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then

-# Doxygen will generate a detailed section even if there is only a brief

-# description.

-

-ALWAYS_DETAILED_SEC    = NO

-

-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all

-# inherited members of a class in the documentation of that class as if those

-# members were ordinary class members. Constructors, destructors and assignment

-# operators of the base classes will not be shown.

-

-INLINE_INHERITED_MEMB  = NO

-

-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full

-# path before files name in the file list and in the header files. If set

-# to NO the shortest path that makes the file name unique will be used.

-

-FULL_PATH_NAMES        = YES

-

-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag

-# can be used to strip a user-defined part of the path. Stripping is

-# only done if one of the specified strings matches the left-hand part of

-# the path. The tag can be used to show relative paths in the file list.

-# If left blank the directory from which doxygen is run is used as the

-# path to strip.

-

-STRIP_FROM_PATH        =

-

-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of

-# the path mentioned in the documentation of a class, which tells

-# the reader which header file to include in order to use a class.

-# If left blank only the name of the header file containing the class

-# definition is used. Otherwise one should specify the include paths that

-# are normally passed to the compiler using the -I flag.

-

-STRIP_FROM_INC_PATH    =

-

-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter

-# (but less readable) file names. This can be useful is your file systems

-# doesn't support long names like on DOS, Mac, or CD-ROM.

-

-SHORT_NAMES            = YES

-

-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen

-# will interpret the first line (until the first dot) of a JavaDoc-style

-# comment as the brief description. If set to NO, the JavaDoc

-# comments will behave just like regular Qt-style comments

-# (thus requiring an explicit @brief command for a brief description.)

-

-JAVADOC_AUTOBRIEF      = NO

-

-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will

-# interpret the first line (until the first dot) of a Qt-style

-# comment as the brief description. If set to NO, the comments

-# will behave just like regular Qt-style comments (thus requiring

-# an explicit \brief command for a brief description.)

-

-QT_AUTOBRIEF           = NO

-

-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen

-# treat a multi-line C++ special comment block (i.e. a block of //! or ///

-# comments) as a brief description. This used to be the default behaviour.

-# The new default is to treat a multi-line C++ comment block as a detailed

-# description. Set this tag to YES if you prefer the old behaviour instead.

-

-MULTILINE_CPP_IS_BRIEF = NO

-

-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented

-# member inherits the documentation from any documented member that it

-# re-implements.

-

-INHERIT_DOCS           = YES

-

-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce

-# a new page for each member. If set to NO, the documentation of a member will

-# be part of the file/class/namespace that contains it.

-

-SEPARATE_MEMBER_PAGES  = NO

-

-# The TAB_SIZE tag can be used to set the number of spaces in a tab.

-# Doxygen uses this value to replace tabs by spaces in code fragments.

-

-TAB_SIZE               = 4

-

-# This tag can be used to specify a number of aliases that acts

-# as commands in the documentation. An alias has the form "name=value".

-# For example adding "sideeffect=\par Side Effects:\n" will allow you to

-# put the command \sideeffect (or @sideeffect) in the documentation, which

-# will result in a user-defined paragraph with heading "Side Effects:".

-# You can put \n's in the value part of an alias to insert newlines.

-

-ALIASES                =

-

-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C

-# sources only. Doxygen will then generate output that is more tailored for C.

-# For instance, some of the names that are used will be different. The list

-# of all members will be omitted, etc.

-

-OPTIMIZE_OUTPUT_FOR_C  = YES

-

-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java

-# sources only. Doxygen will then generate output that is more tailored for

-# Java. For instance, namespaces will be presented as packages, qualified

-# scopes will look different, etc.

-

-OPTIMIZE_OUTPUT_JAVA   = NO

-

-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran

-# sources only. Doxygen will then generate output that is more tailored for

-# Fortran.

-

-OPTIMIZE_FOR_FORTRAN   = NO

-

-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL

-# sources. Doxygen will then generate output that is tailored for

-# VHDL.

-

-OPTIMIZE_OUTPUT_VHDL   = NO

-

-# Doxygen selects the parser to use depending on the extension of the files it parses.

-# With this tag you can assign which parser to use for a given extension.

-# Doxygen has a built-in mapping, but you can override or extend it using this tag.

-# The format is ext=language, where ext is a file extension, and language is one of

-# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,

-# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat

-# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),

-# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.

-

-EXTENSION_MAPPING      =

-

-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want

-# to include (a tag file for) the STL sources as input, then you should

-# set this tag to YES in order to let doxygen match functions declarations and

-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.

-# func(std::string) {}). This also make the inheritance and collaboration

-# diagrams that involve STL classes more complete and accurate.

-

-BUILTIN_STL_SUPPORT    = NO

-

-# If you use Microsoft's C++/CLI language, you should set this option to YES to

-# enable parsing support.

-

-CPP_CLI_SUPPORT        = NO

-

-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.

-# Doxygen will parse them like normal C++ but will assume all classes use public

-# instead of private inheritance when no explicit protection keyword is present.

-

-SIP_SUPPORT            = NO

-

-# For Microsoft's IDL there are propget and propput attributes to indicate getter

-# and setter methods for a property. Setting this option to YES (the default)

-# will make doxygen to replace the get and set methods by a property in the

-# documentation. This will only work if the methods are indeed getting or

-# setting a simple type. If this is not the case, or you want to show the

-# methods anyway, you should set this option to NO.

-

-IDL_PROPERTY_SUPPORT   = YES

-

-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC

-# tag is set to YES, then doxygen will reuse the documentation of the first

-# member in the group (if any) for the other members of the group. By default

-# all members of a group must be documented explicitly.

-

-DISTRIBUTE_GROUP_DOC   = NO

-

-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of

-# the same type (for instance a group of public functions) to be put as a

-# subgroup of that type (e.g. under the Public Functions section). Set it to

-# NO to prevent subgrouping. Alternatively, this can be done per class using

-# the \nosubgrouping command.

-

-SUBGROUPING            = YES

-

-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum

-# is documented as struct, union, or enum with the name of the typedef. So

-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct

-# with name TypeT. When disabled the typedef will appear as a member of a file,

-# namespace, or class. And the struct will be named TypeS. This can typically

-# be useful for C code in case the coding convention dictates that all compound

-# types are typedef'ed and only the typedef is referenced, never the tag name.

-

-TYPEDEF_HIDES_STRUCT   = NO

-

-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to

-# determine which symbols to keep in memory and which to flush to disk.

-# When the cache is full, less often used symbols will be written to disk.

-# For small to medium size projects (<1000 input files) the default value is

-# probably good enough. For larger projects a too small cache size can cause

-# doxygen to be busy swapping symbols to and from disk most of the time

-# causing a significant performance penality.

-# If the system has enough physical memory increasing the cache will improve the

-# performance by keeping more symbols in memory. Note that the value works on

-# a logarithmic scale so increasing the size by one will rougly double the

-# memory usage. The cache size is given by this formula:

-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,

-# corresponding to a cache size of 2^16 = 65536 symbols

-

-SYMBOL_CACHE_SIZE      = 0

-

-#---------------------------------------------------------------------------

-# Build related configuration options

-#---------------------------------------------------------------------------

-

-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in

-# documentation are documented, even if no documentation was available.

-# Private class members and static file members will be hidden unless

-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

-

-EXTRACT_ALL            = YES

-

-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class

-# will be included in the documentation.

-

-EXTRACT_PRIVATE        = YES

-

-# If the EXTRACT_STATIC tag is set to YES all static members of a file

-# will be included in the documentation.

-

-EXTRACT_STATIC         = YES

-

-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)

-# defined locally in source files will be included in the documentation.

-# If set to NO only classes defined in header files are included.

-

-EXTRACT_LOCAL_CLASSES  = YES

-

-# This flag is only useful for Objective-C code. When set to YES local

-# methods, which are defined in the implementation section but not in

-# the interface are included in the documentation.

-# If set to NO (the default) only methods in the interface are included.

-

-EXTRACT_LOCAL_METHODS  = NO

-

-# If this flag is set to YES, the members of anonymous namespaces will be

-# extracted and appear in the documentation as a namespace called

-# 'anonymous_namespace{file}', where file will be replaced with the base

-# name of the file that contains the anonymous namespace. By default

-# anonymous namespace are hidden.

-

-EXTRACT_ANON_NSPACES   = NO

-

-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all

-# undocumented members of documented classes, files or namespaces.

-# If set to NO (the default) these members will be included in the

-# various overviews, but no documentation section is generated.

-# This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_MEMBERS     = NO

-

-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all

-# undocumented classes that are normally visible in the class hierarchy.

-# If set to NO (the default) these classes will be included in the various

-# overviews. This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_CLASSES     = NO

-

-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all

-# friend (class|struct|union) declarations.

-# If set to NO (the default) these declarations will be included in the

-# documentation.

-

-HIDE_FRIEND_COMPOUNDS  = NO

-

-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any

-# documentation blocks found inside the body of a function.

-# If set to NO (the default) these blocks will be appended to the

-# function's detailed documentation block.

-

-HIDE_IN_BODY_DOCS      = NO

-

-# The INTERNAL_DOCS tag determines if documentation

-# that is typed after a \internal command is included. If the tag is set

-# to NO (the default) then the documentation will be excluded.

-# Set it to YES to include the internal documentation.

-

-INTERNAL_DOCS          = NO

-

-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate

-# file names in lower-case letters. If set to YES upper-case letters are also

-# allowed. This is useful if you have classes or files whose names only differ

-# in case and if your file system supports case sensitive file names. Windows

-# and Mac users are advised to set this option to NO.

-

-CASE_SENSE_NAMES       = NO

-

-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen

-# will show members with their full class and namespace scopes in the

-# documentation. If set to YES the scope will be hidden.

-

-HIDE_SCOPE_NAMES       = NO

-

-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen

-# will put a list of the files that are included by a file in the documentation

-# of that file.

-

-SHOW_INCLUDE_FILES     = YES

-

-# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen

-# will list include files with double quotes in the documentation

-# rather than with sharp brackets.

-

-FORCE_LOCAL_INCLUDES   = NO

-

-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]

-# is inserted in the documentation for inline members.

-

-INLINE_INFO            = YES

-

-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen

-# will sort the (detailed) documentation of file and class members

-# alphabetically by member name. If set to NO the members will appear in

-# declaration order.

-

-SORT_MEMBER_DOCS       = YES

-

-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the

-# brief documentation of file, namespace and class members alphabetically

-# by member name. If set to NO (the default) the members will appear in

-# declaration order.

-

-SORT_BRIEF_DOCS        = NO

-

-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.

-

-SORT_MEMBERS_CTORS_1ST = NO

-

-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the

-# hierarchy of group names into alphabetical order. If set to NO (the default)

-# the group names will appear in their defined order.

-

-SORT_GROUP_NAMES       = NO

-

-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be

-# sorted by fully-qualified names, including namespaces. If set to

-# NO (the default), the class list will be sorted only by class name,

-# not including the namespace part.

-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.

-# Note: This option applies only to the class list, not to the

-# alphabetical list.

-

-SORT_BY_SCOPE_NAME     = NO

-

-# The GENERATE_TODOLIST tag can be used to enable (YES) or

-# disable (NO) the todo list. This list is created by putting \todo

-# commands in the documentation.

-

-GENERATE_TODOLIST      = NO

-

-# The GENERATE_TESTLIST tag can be used to enable (YES) or

-# disable (NO) the test list. This list is created by putting \test

-# commands in the documentation.

-

-GENERATE_TESTLIST      = NO

-

-# The GENERATE_BUGLIST tag can be used to enable (YES) or

-# disable (NO) the bug list. This list is created by putting \bug

-# commands in the documentation.

-

-GENERATE_BUGLIST       = NO

-

-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or

-# disable (NO) the deprecated list. This list is created by putting

-# \deprecated commands in the documentation.

-

-GENERATE_DEPRECATEDLIST= YES

-

-# The ENABLED_SECTIONS tag can be used to enable conditional

-# documentation sections, marked by \if sectionname ... \endif.

-

-ENABLED_SECTIONS       =

-

-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines

-# the initial value of a variable or define consists of for it to appear in

-# the documentation. If the initializer consists of more lines than specified

-# here it will be hidden. Use a value of 0 to hide initializers completely.

-# The appearance of the initializer of individual variables and defines in the

-# documentation can be controlled using \showinitializer or \hideinitializer

-# command in the documentation regardless of this setting.

-

-MAX_INITIALIZER_LINES  = 30

-

-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated

-# at the bottom of the documentation of classes and structs. If set to YES the

-# list will mention the files that were used to generate the documentation.

-

-SHOW_USED_FILES        = YES

-

-# If the sources in your project are distributed over multiple directories

-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy

-# in the documentation. The default is NO.

-

-SHOW_DIRECTORIES       = YES

-

-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.

-# This will remove the Files entry from the Quick Index and from the

-# Folder Tree View (if specified). The default is YES.

-

-SHOW_FILES             = YES

-

-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the

-# Namespaces page.

-# This will remove the Namespaces entry from the Quick Index

-# and from the Folder Tree View (if specified). The default is YES.

-

-SHOW_NAMESPACES        = YES

-

-# The FILE_VERSION_FILTER tag can be used to specify a program or script that

-# doxygen should invoke to get the current version for each file (typically from

-# the version control system). Doxygen will invoke the program by executing (via

-# popen()) the command <command> <input-file>, where <command> is the value of

-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file

-# provided by doxygen. Whatever the program writes to standard output

-# is used as the file version. See the manual for examples.

-

-FILE_VERSION_FILTER    =

-

-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by

-# doxygen. The layout file controls the global structure of the generated output files

-# in an output format independent way. The create the layout file that represents

-# doxygen's defaults, run doxygen with the -l option. You can optionally specify a

-# file name after the option, if omitted DoxygenLayout.xml will be used as the name

-# of the layout file.

-

-LAYOUT_FILE            =

-

-#---------------------------------------------------------------------------

-# configuration options related to warning and progress messages

-#---------------------------------------------------------------------------

-

-# The QUIET tag can be used to turn on/off the messages that are generated

-# by doxygen. Possible values are YES and NO. If left blank NO is used.

-

-QUIET                  = YES

-

-# The WARNINGS tag can be used to turn on/off the warning messages that are

-# generated by doxygen. Possible values are YES and NO. If left blank

-# NO is used.

-

-WARNINGS               = YES

-

-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings

-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will

-# automatically be disabled.

-

-WARN_IF_UNDOCUMENTED   = YES

-

-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for

-# potential errors in the documentation, such as not documenting some

-# parameters in a documented function, or documenting parameters that

-# don't exist or using markup commands wrongly.

-

-WARN_IF_DOC_ERROR      = YES

-

-# This WARN_NO_PARAMDOC option can be abled to get warnings for

-# functions that are documented, but have no documentation for their parameters

-# or return value. If set to NO (the default) doxygen will only warn about

-# wrong or incomplete parameter documentation, but not about the absence of

-# documentation.

-

-WARN_NO_PARAMDOC       = YES

-

-# The WARN_FORMAT tag determines the format of the warning messages that

-# doxygen can produce. The string should contain the $file, $line, and $text

-# tags, which will be replaced by the file and line number from which the

-# warning originated and the warning text. Optionally the format may contain

-# $version, which will be replaced by the version of the file (if it could

-# be obtained via FILE_VERSION_FILTER)

-

-WARN_FORMAT            = "$file:$line: $text"

-

-# The WARN_LOGFILE tag can be used to specify a file to which warning

-# and error messages should be written. If left blank the output is written

-# to stderr.

-

-WARN_LOGFILE           =

-

-#---------------------------------------------------------------------------

-# configuration options related to the input files

-#---------------------------------------------------------------------------

-

-# The INPUT tag can be used to specify the files and/or directories that contain

-# documented source files. You may enter file names like "myfile.cpp" or

-# directories like "/usr/src/myproject". Separate the files or directories

-# with spaces.

-

-INPUT                  = ./

-

-# This tag can be used to specify the character encoding of the source files

-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is

-# also the default input encoding. Doxygen uses libiconv (or the iconv built

-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for

-# the list of possible encodings.

-

-INPUT_ENCODING         = UTF-8

-

-# If the value of the INPUT tag contains directories, you can use the

-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank the following patterns are tested:

-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx

-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90

-

-FILE_PATTERNS          = *.h \

-                         *.c \

-                         *.txt

-

-# The RECURSIVE tag can be used to turn specify whether or not subdirectories

-# should be searched for input files as well. Possible values are YES and NO.

-# If left blank NO is used.

-

-RECURSIVE              = YES

-

-# The EXCLUDE tag can be used to specify files and/or directories that should

-# excluded from the INPUT source files. This way you can easily exclude a

-# subdirectory from a directory tree whose root is specified with the INPUT tag.

-

-EXCLUDE                = Documentation/

-

-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or

-# directories that are symbolic links (a Unix filesystem feature) are excluded

-# from the input.

-

-EXCLUDE_SYMLINKS       = NO

-

-# If the value of the INPUT tag contains directories, you can use the

-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude

-# certain files from those directories. Note that the wildcards are matched

-# against the file with absolute path, so to exclude all test directories

-# for example use the pattern */test/*

-

-EXCLUDE_PATTERNS       = 

-

-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names

-# (namespaces, classes, functions, etc.) that should be excluded from the

-# output. The symbol name can be a fully qualified name, a word, or if the

-# wildcard * is used, a substring. Examples: ANamespace, AClass,

-# AClass::ANamespace, ANamespace::*Test

-

-EXCLUDE_SYMBOLS        = __* \

-                         INCLUDE_FROM_*

-

-# The EXAMPLE_PATH tag can be used to specify one or more files or

-# directories that contain example code fragments that are included (see

-# the \include command).

-

-EXAMPLE_PATH           =

-

-# If the value of the EXAMPLE_PATH tag contains directories, you can use the

-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank all files are included.

-

-EXAMPLE_PATTERNS       = *

-

-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be

-# searched for input files to be used with the \include or \dontinclude

-# commands irrespective of the value of the RECURSIVE tag.

-# Possible values are YES and NO. If left blank NO is used.

-

-EXAMPLE_RECURSIVE      = NO

-

-# The IMAGE_PATH tag can be used to specify one or more files or

-# directories that contain image that are included in the documentation (see

-# the \image command).

-

-IMAGE_PATH             =

-

-# The INPUT_FILTER tag can be used to specify a program that doxygen should

-# invoke to filter for each input file. Doxygen will invoke the filter program

-# by executing (via popen()) the command <filter> <input-file>, where <filter>

-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an

-# input file. Doxygen will then use the output that the filter program writes

-# to standard output.

-# If FILTER_PATTERNS is specified, this tag will be

-# ignored.

-

-INPUT_FILTER           =

-

-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern

-# basis.

-# Doxygen will compare the file name with each pattern and apply the

-# filter if there is a match.

-# The filters are a list of the form:

-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further

-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER

-# is applied to all files.

-

-FILTER_PATTERNS        =

-

-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using

-# INPUT_FILTER) will be used to filter the input files when producing source

-# files to browse (i.e. when SOURCE_BROWSER is set to YES).

-

-FILTER_SOURCE_FILES    = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to source browsing

-#---------------------------------------------------------------------------

-

-# If the SOURCE_BROWSER tag is set to YES then a list of source files will

-# be generated. Documented entities will be cross-referenced with these sources.

-# Note: To get rid of all source code in the generated output, make sure also

-# VERBATIM_HEADERS is set to NO.

-

-SOURCE_BROWSER         = NO

-

-# Setting the INLINE_SOURCES tag to YES will include the body

-# of functions and classes directly in the documentation.

-

-INLINE_SOURCES         = NO

-

-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct

-# doxygen to hide any special comment blocks from generated source code

-# fragments. Normal C and C++ comments will always remain visible.

-

-STRIP_CODE_COMMENTS    = YES

-

-# If the REFERENCED_BY_RELATION tag is set to YES

-# then for each documented function all documented

-# functions referencing it will be listed.

-

-REFERENCED_BY_RELATION = NO

-

-# If the REFERENCES_RELATION tag is set to YES

-# then for each documented function all documented entities

-# called/used by that function will be listed.

-

-REFERENCES_RELATION    = NO

-

-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)

-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from

-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will

-# link to the source code.

-# Otherwise they will link to the documentation.

-

-REFERENCES_LINK_SOURCE = NO

-

-# If the USE_HTAGS tag is set to YES then the references to source code

-# will point to the HTML generated by the htags(1) tool instead of doxygen

-# built-in source browser. The htags tool is part of GNU's global source

-# tagging system (see http://www.gnu.org/software/global/global.html). You

-# will need version 4.8.6 or higher.

-

-USE_HTAGS              = NO

-

-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen

-# will generate a verbatim copy of the header file for each class for

-# which an include is specified. Set to NO to disable this.

-

-VERBATIM_HEADERS       = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the alphabetical class index

-#---------------------------------------------------------------------------

-

-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index

-# of all compounds will be generated. Enable this if the project

-# contains a lot of classes, structs, unions or interfaces.

-

-ALPHABETICAL_INDEX     = YES

-

-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then

-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns

-# in which this list will be split (can be a number in the range [1..20])

-

-COLS_IN_ALPHA_INDEX    = 5

-

-# In case all classes in a project start with a common prefix, all

-# classes will be put under the same header in the alphabetical index.

-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that

-# should be ignored while generating the index headers.

-

-IGNORE_PREFIX          =

-

-#---------------------------------------------------------------------------

-# configuration options related to the HTML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will

-# generate HTML output.

-

-GENERATE_HTML          = YES

-

-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `html' will be used as the default path.

-

-HTML_OUTPUT            = html

-

-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for

-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank

-# doxygen will generate files with .html extension.

-

-HTML_FILE_EXTENSION    = .html

-

-# The HTML_HEADER tag can be used to specify a personal HTML header for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard header.

-

-HTML_HEADER            =

-

-# The HTML_FOOTER tag can be used to specify a personal HTML footer for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard footer.

-

-HTML_FOOTER            =

-

-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading

-# style sheet that is used by each HTML page. It can be used to

-# fine-tune the look of the HTML output. If the tag is left blank doxygen

-# will generate a default style sheet. Note that doxygen will try to copy

-# the style sheet file to the HTML output directory, so don't put your own

-# stylesheet in the HTML output directory as well, or it will be erased!

-

-HTML_STYLESHEET        =

-

-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML

-# page will contain the date and time when the page was generated. Setting

-# this to NO can help when comparing the output of multiple runs.

-

-HTML_TIMESTAMP         = NO

-

-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,

-# files or namespaces will be aligned in HTML using tables. If set to

-# NO a bullet list will be used.

-

-HTML_ALIGN_MEMBERS     = YES

-

-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML

-# documentation will contain sections that can be hidden and shown after the

-# page has loaded. For this to work a browser that supports

-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox

-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).

-

-HTML_DYNAMIC_SECTIONS  = YES

-

-# If the GENERATE_DOCSET tag is set to YES, additional index files

-# will be generated that can be used as input for Apple's Xcode 3

-# integrated development environment, introduced with OSX 10.5 (Leopard).

-# To create a documentation set, doxygen will generate a Makefile in the

-# HTML output directory. Running make will produce the docset in that

-# directory and running "make install" will install the docset in

-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find

-# it at startup.

-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.

-

-GENERATE_DOCSET        = NO

-

-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the

-# feed. A documentation feed provides an umbrella under which multiple

-# documentation sets from a single provider (such as a company or product suite)

-# can be grouped.

-

-DOCSET_FEEDNAME        = "Doxygen generated docs"

-

-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that

-# should uniquely identify the documentation set bundle. This should be a

-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen

-# will append .docset to the name.

-

-DOCSET_BUNDLE_ID       = org.doxygen.Project

-

-# If the GENERATE_HTMLHELP tag is set to YES, additional index files

-# will be generated that can be used as input for tools like the

-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)

-# of the generated HTML documentation.

-

-GENERATE_HTMLHELP      = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can

-# be used to specify the file name of the resulting .chm file. You

-# can add a path in front of the file if the result should not be

-# written to the html output directory.

-

-CHM_FILE               =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can

-# be used to specify the location (absolute path including file name) of

-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run

-# the HTML help compiler on the generated index.hhp.

-

-HHC_LOCATION           =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag

-# controls if a separate .chi index file is generated (YES) or that

-# it should be included in the master .chm file (NO).

-

-GENERATE_CHI           = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING

-# is used to encode HtmlHelp index (hhk), content (hhc) and project file

-# content.

-

-CHM_INDEX_ENCODING     =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag

-# controls whether a binary table of contents is generated (YES) or a

-# normal table of contents (NO) in the .chm file.

-

-BINARY_TOC             = NO

-

-# The TOC_EXPAND flag can be set to YES to add extra items for group members

-# to the contents of the HTML help documentation and to the tree view.

-

-TOC_EXPAND             = YES

-

-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER

-# are set, an additional index file will be generated that can be used as input for

-# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated

-# HTML documentation.

-

-GENERATE_QHP           = NO

-

-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can

-# be used to specify the file name of the resulting .qch file.

-# The path specified is relative to the HTML output folder.

-

-QCH_FILE               =

-

-# The QHP_NAMESPACE tag specifies the namespace to use when generating

-# Qt Help Project output. For more information please see

-# http://doc.trolltech.com/qthelpproject.html#namespace

-

-QHP_NAMESPACE          = org.doxygen.Project

-

-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating

-# Qt Help Project output. For more information please see

-# http://doc.trolltech.com/qthelpproject.html#virtual-folders

-

-QHP_VIRTUAL_FOLDER     = doc

-

-# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.

-# For more information please see

-# http://doc.trolltech.com/qthelpproject.html#custom-filters

-

-QHP_CUST_FILTER_NAME   =

-

-# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see

-# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.

-

-QHP_CUST_FILTER_ATTRS  =

-

-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's

-# filter section matches.

-# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.

-

-QHP_SECT_FILTER_ATTRS  =

-

-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can

-# be used to specify the location of Qt's qhelpgenerator.

-# If non-empty doxygen will try to run qhelpgenerator on the generated

-# .qhp file.

-

-QHG_LOCATION           =

-

-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files

-#  will be generated, which together with the HTML files, form an Eclipse help

-#  plugin. To install this plugin and make it available under the help contents

-# menu in Eclipse, the contents of the directory containing the HTML and XML

-# files needs to be copied into the plugins directory of eclipse. The name of

-# the directory within the plugins directory should be the same as

-# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears.

-

-GENERATE_ECLIPSEHELP   = NO

-

-# A unique identifier for the eclipse help plugin. When installing the plugin

-# the directory name containing the HTML and XML files should also have

-# this name.

-

-ECLIPSE_DOC_ID         = org.doxygen.Project

-

-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at

-# top of each HTML page. The value NO (the default) enables the index and

-# the value YES disables it.

-

-DISABLE_INDEX          = NO

-

-# This tag can be used to set the number of enum values (range [1..20])

-# that doxygen will group on one line in the generated HTML documentation.

-

-ENUM_VALUES_PER_LINE   = 1

-

-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index

-# structure should be generated to display hierarchical information.

-# If the tag value is set to YES, a side panel will be generated

-# containing a tree-like index structure (just like the one that

-# is generated for HTML Help). For this to work a browser that supports

-# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).

-# Windows users are probably better off using the HTML help feature.

-

-GENERATE_TREEVIEW      = YES

-

-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,

-# and Class Hierarchy pages using a tree view instead of an ordered list.

-

-USE_INLINE_TREES       = NO

-

-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be

-# used to set the initial width (in pixels) of the frame in which the tree

-# is shown.

-

-TREEVIEW_WIDTH         = 250

-

-# Use this tag to change the font size of Latex formulas included

-# as images in the HTML documentation. The default is 10. Note that

-# when you change the font size after a successful doxygen run you need

-# to manually remove any form_*.png images from the HTML output directory

-# to force them to be regenerated.

-

-FORMULA_FONTSIZE       = 10

-

-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript

-# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should

-# typically be disabled. For large projects the javascript based search engine

-# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.

-

-SEARCHENGINE           = NO

-

-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index

-# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup

-# and does not have live searching capabilities.

-

-SERVER_BASED_SEARCH    = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the LaTeX output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will

-# generate Latex output.

-

-GENERATE_LATEX         = NO

-

-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `latex' will be used as the default path.

-

-LATEX_OUTPUT           = latex

-

-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be

-# invoked. If left blank `latex' will be used as the default command name.

-# Note that when enabling USE_PDFLATEX this option is only used for

-# generating bitmaps for formulas in the HTML output, but not in the

-# Makefile that is written to the output directory.

-

-LATEX_CMD_NAME         = latex

-

-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to

-# generate index for LaTeX. If left blank `makeindex' will be used as the

-# default command name.

-

-MAKEINDEX_CMD_NAME     = makeindex

-

-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact

-# LaTeX documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_LATEX          = NO

-

-# The PAPER_TYPE tag can be used to set the paper type that is used

-# by the printer. Possible values are: a4, a4wide, letter, legal and

-# executive. If left blank a4wide will be used.

-

-PAPER_TYPE             = a4wide

-

-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX

-# packages that should be included in the LaTeX output.

-

-EXTRA_PACKAGES         =

-

-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for

-# the generated latex document. The header should contain everything until

-# the first chapter. If it is left blank doxygen will generate a

-# standard header. Notice: only use this tag if you know what you are doing!

-

-LATEX_HEADER           =

-

-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated

-# is prepared for conversion to pdf (using ps2pdf). The pdf file will

-# contain links (just like the HTML output) instead of page references

-# This makes the output suitable for online browsing using a pdf viewer.

-

-PDF_HYPERLINKS         = YES

-

-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of

-# plain latex in the generated Makefile. Set this option to YES to get a

-# higher quality PDF documentation.

-

-USE_PDFLATEX           = YES

-

-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.

-# command to the generated LaTeX files. This will instruct LaTeX to keep

-# running if errors occur, instead of asking the user for help.

-# This option is also used when generating formulas in HTML.

-

-LATEX_BATCHMODE        = NO

-

-# If LATEX_HIDE_INDICES is set to YES then doxygen will not

-# include the index chapters (such as File Index, Compound Index, etc.)

-# in the output.

-

-LATEX_HIDE_INDICES     = NO

-

-# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.

-

-LATEX_SOURCE_CODE      = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the RTF output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output

-# The RTF output is optimized for Word 97 and may not look very pretty with

-# other RTF readers or editors.

-

-GENERATE_RTF           = NO

-

-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `rtf' will be used as the default path.

-

-RTF_OUTPUT             = rtf

-

-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact

-# RTF documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_RTF            = NO

-

-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated

-# will contain hyperlink fields. The RTF file will

-# contain links (just like the HTML output) instead of page references.

-# This makes the output suitable for online browsing using WORD or other

-# programs which support those fields.

-# Note: wordpad (write) and others do not support links.

-

-RTF_HYPERLINKS         = NO

-

-# Load stylesheet definitions from file. Syntax is similar to doxygen's

-# config file, i.e. a series of assignments. You only have to provide

-# replacements, missing definitions are set to their default value.

-

-RTF_STYLESHEET_FILE    =

-

-# Set optional variables used in the generation of an rtf document.

-# Syntax is similar to doxygen's config file.

-

-RTF_EXTENSIONS_FILE    =

-

-#---------------------------------------------------------------------------

-# configuration options related to the man page output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will

-# generate man pages

-

-GENERATE_MAN           = NO

-

-# The MAN_OUTPUT tag is used to specify where the man pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `man' will be used as the default path.

-

-MAN_OUTPUT             = man

-

-# The MAN_EXTENSION tag determines the extension that is added to

-# the generated man pages (default is the subroutine's section .3)

-

-MAN_EXTENSION          = .3

-

-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,

-# then it will generate one additional man file for each entity

-# documented in the real man page(s). These additional files

-# only source the real man page, but without them the man command

-# would be unable to find the correct page. The default is NO.

-

-MAN_LINKS              = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the XML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_XML tag is set to YES Doxygen will

-# generate an XML file that captures the structure of

-# the code including all documentation.

-

-GENERATE_XML           = NO

-

-# The XML_OUTPUT tag is used to specify where the XML pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `xml' will be used as the default path.

-

-XML_OUTPUT             = xml

-

-# The XML_SCHEMA tag can be used to specify an XML schema,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_SCHEMA             =

-

-# The XML_DTD tag can be used to specify an XML DTD,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_DTD                =

-

-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will

-# dump the program listings (including syntax highlighting

-# and cross-referencing information) to the XML output. Note that

-# enabling this will significantly increase the size of the XML output.

-

-XML_PROGRAMLISTING     = YES

-

-#---------------------------------------------------------------------------

-# configuration options for the AutoGen Definitions output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will

-# generate an AutoGen Definitions (see autogen.sf.net) file

-# that captures the structure of the code including all

-# documentation. Note that this feature is still experimental

-# and incomplete at the moment.

-

-GENERATE_AUTOGEN_DEF   = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the Perl module output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_PERLMOD tag is set to YES Doxygen will

-# generate a Perl module file that captures the structure of

-# the code including all documentation. Note that this

-# feature is still experimental and incomplete at the

-# moment.

-

-GENERATE_PERLMOD       = NO

-

-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate

-# the necessary Makefile rules, Perl scripts and LaTeX code to be able

-# to generate PDF and DVI output from the Perl module output.

-

-PERLMOD_LATEX          = NO

-

-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be

-# nicely formatted so it can be parsed by a human reader.

-# This is useful

-# if you want to understand what is going on.

-# On the other hand, if this

-# tag is set to NO the size of the Perl module output will be much smaller

-# and Perl will parse it just the same.

-

-PERLMOD_PRETTY         = YES

-

-# The names of the make variables in the generated doxyrules.make file

-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.

-# This is useful so different doxyrules.make files included by the same

-# Makefile don't overwrite each other's variables.

-

-PERLMOD_MAKEVAR_PREFIX =

-

-#---------------------------------------------------------------------------

-# Configuration options related to the preprocessor

-#---------------------------------------------------------------------------

-

-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will

-# evaluate all C-preprocessor directives found in the sources and include

-# files.

-

-ENABLE_PREPROCESSING   = YES

-

-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro

-# names in the source code. If set to NO (the default) only conditional

-# compilation will be performed. Macro expansion can be done in a controlled

-# way by setting EXPAND_ONLY_PREDEF to YES.

-

-MACRO_EXPANSION        = YES

-

-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES

-# then the macro expansion is limited to the macros specified with the

-# PREDEFINED and EXPAND_AS_DEFINED tags.

-

-EXPAND_ONLY_PREDEF     = YES

-

-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files

-# in the INCLUDE_PATH (see below) will be search if a #include is found.

-

-SEARCH_INCLUDES        = YES

-

-# The INCLUDE_PATH tag can be used to specify one or more directories that

-# contain include files that are not input files but should be processed by

-# the preprocessor.

-

-INCLUDE_PATH           =

-

-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard

-# patterns (like *.h and *.hpp) to filter out the header-files in the

-# directories. If left blank, the patterns specified with FILE_PATTERNS will

-# be used.

-

-INCLUDE_FILE_PATTERNS  =

-

-# The PREDEFINED tag can be used to specify one or more macro names that

-# are defined before the preprocessor is started (similar to the -D option of

-# gcc). The argument of the tag is a list of macros of the form: name

-# or name=definition (no spaces). If the definition and the = are

-# omitted =1 is assumed. To prevent a macro definition from being

-# undefined via #undef or recursively expanded use the := operator

-# instead of the = operator.

-

-PREDEFINED             = __DOXYGEN__ \

-                         PROGMEM

-

-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then

-# this tag can be used to specify a list of macro names that should be expanded.

-# The macro definition that is found in the sources will be used.

-# Use the PREDEFINED tag if you want to use a different macro definition.

-

-EXPAND_AS_DEFINED      = 

-

-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then

-# doxygen's preprocessor will remove all function-like macros that are alone

-# on a line, have an all uppercase name, and do not end with a semicolon. Such

-# function macros are typically used for boiler-plate code, and will confuse

-# the parser if not removed.

-

-SKIP_FUNCTION_MACROS   = YES

-

-#---------------------------------------------------------------------------

-# Configuration::additions related to external references

-#---------------------------------------------------------------------------

-

-# The TAGFILES option can be used to specify one or more tagfiles.

-# Optionally an initial location of the external documentation

-# can be added for each tagfile. The format of a tag file without

-# this location is as follows:

-#

-# TAGFILES = file1 file2 ...

-# Adding location for the tag files is done as follows:

-#

-# TAGFILES = file1=loc1 "file2 = loc2" ...

-# where "loc1" and "loc2" can be relative or absolute paths or

-# URLs. If a location is present for each tag, the installdox tool

-# does not have to be run to correct the links.

-# Note that each tag file must have a unique name

-# (where the name does NOT include the path)

-# If a tag file is not located in the directory in which doxygen

-# is run, you must also specify the path to the tagfile here.

-

-TAGFILES               =

-

-# When a file name is specified after GENERATE_TAGFILE, doxygen will create

-# a tag file that is based on the input files it reads.

-

-GENERATE_TAGFILE       =

-

-# If the ALLEXTERNALS tag is set to YES all external classes will be listed

-# in the class index. If set to NO only the inherited external classes

-# will be listed.

-

-ALLEXTERNALS           = NO

-

-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed

-# in the modules index. If set to NO, only the current project's groups will

-# be listed.

-

-EXTERNAL_GROUPS        = YES

-

-# The PERL_PATH should be the absolute path and name of the perl script

-# interpreter (i.e. the result of `which perl').

-

-PERL_PATH              = /usr/bin/perl

-

-#---------------------------------------------------------------------------

-# Configuration options related to the dot tool

-#---------------------------------------------------------------------------

-

-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will

-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base

-# or super classes. Setting the tag to NO turns the diagrams off. Note that

-# this option is superseded by the HAVE_DOT option below. This is only a

-# fallback. It is recommended to install and use dot, since it yields more

-# powerful graphs.

-

-CLASS_DIAGRAMS         = NO

-

-# You can define message sequence charts within doxygen comments using the \msc

-# command. Doxygen will then run the mscgen tool (see

-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the

-# documentation. The MSCGEN_PATH tag allows you to specify the directory where

-# the mscgen tool resides. If left empty the tool is assumed to be found in the

-# default search path.

-

-MSCGEN_PATH            =

-

-# If set to YES, the inheritance and collaboration graphs will hide

-# inheritance and usage relations if the target is undocumented

-# or is not a class.

-

-HIDE_UNDOC_RELATIONS   = YES

-

-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is

-# available from the path. This tool is part of Graphviz, a graph visualization

-# toolkit from AT&T and Lucent Bell Labs. The other options in this section

-# have no effect if this option is set to NO (the default)

-

-HAVE_DOT               = NO

-

-# By default doxygen will write a font called FreeSans.ttf to the output

-# directory and reference it in all dot files that doxygen generates. This

-# font does not include all possible unicode characters however, so when you need

-# these (or just want a differently looking font) you can specify the font name

-# using DOT_FONTNAME. You need need to make sure dot is able to find the font,

-# which can be done by putting it in a standard location or by setting the

-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory

-# containing the font.

-

-DOT_FONTNAME           = FreeSans

-

-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.

-# The default size is 10pt.

-

-DOT_FONTSIZE           = 10

-

-# By default doxygen will tell dot to use the output directory to look for the

-# FreeSans.ttf font (which doxygen will put there itself). If you specify a

-# different font using DOT_FONTNAME you can set the path where dot

-# can find it using this tag.

-

-DOT_FONTPATH           =

-

-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect inheritance relations. Setting this tag to YES will force the

-# the CLASS_DIAGRAMS tag to NO.

-

-CLASS_GRAPH            = NO

-

-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect implementation dependencies (inheritance, containment, and

-# class references variables) of the class with other documented classes.

-

-COLLABORATION_GRAPH    = NO

-

-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for groups, showing the direct groups dependencies

-

-GROUP_GRAPHS           = NO

-

-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and

-# collaboration diagrams in a style similar to the OMG's Unified Modeling

-# Language.

-

-UML_LOOK               = NO

-

-# If set to YES, the inheritance and collaboration graphs will show the

-# relations between templates and their instances.

-

-TEMPLATE_RELATIONS     = NO

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT

-# tags are set to YES then doxygen will generate a graph for each documented

-# file showing the direct and indirect include dependencies of the file with

-# other documented files.

-

-INCLUDE_GRAPH          = NO

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and

-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each

-# documented header file showing the documented files that directly or

-# indirectly include this file.

-

-INCLUDED_BY_GRAPH      = NO

-

-# If the CALL_GRAPH and HAVE_DOT options are set to YES then

-# doxygen will generate a call dependency graph for every global function

-# or class method. Note that enabling this option will significantly increase

-# the time of a run. So in most cases it will be better to enable call graphs

-# for selected functions only using the \callgraph command.

-

-CALL_GRAPH             = NO

-

-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then

-# doxygen will generate a caller dependency graph for every global function

-# or class method. Note that enabling this option will significantly increase

-# the time of a run. So in most cases it will be better to enable caller

-# graphs for selected functions only using the \callergraph command.

-

-CALLER_GRAPH           = NO

-

-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen

-# will graphical hierarchy of all classes instead of a textual one.

-

-GRAPHICAL_HIERARCHY    = NO

-

-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES

-# then doxygen will show the dependencies a directory has on other directories

-# in a graphical way. The dependency relations are determined by the #include

-# relations between the files in the directories.

-

-DIRECTORY_GRAPH        = NO

-

-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images

-# generated by dot. Possible values are png, jpg, or gif

-# If left blank png will be used.

-

-DOT_IMAGE_FORMAT       = png

-

-# The tag DOT_PATH can be used to specify the path where the dot tool can be

-# found. If left blank, it is assumed the dot tool can be found in the path.

-

-DOT_PATH               =

-

-# The DOTFILE_DIRS tag can be used to specify one or more directories that

-# contain dot files that are included in the documentation (see the

-# \dotfile command).

-

-DOTFILE_DIRS           =

-

-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of

-# nodes that will be shown in the graph. If the number of nodes in a graph

-# becomes larger than this value, doxygen will truncate the graph, which is

-# visualized by representing a node as a red box. Note that doxygen if the

-# number of direct children of the root node in a graph is already larger than

-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note

-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.

-

-DOT_GRAPH_MAX_NODES    = 15

-

-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the

-# graphs generated by dot. A depth value of 3 means that only nodes reachable

-# from the root by following a path via at most 3 edges will be shown. Nodes

-# that lay further from the root node will be omitted. Note that setting this

-# option to 1 or 2 may greatly reduce the computation time needed for large

-# code bases. Also note that the size of a graph can be further restricted by

-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.

-

-MAX_DOT_GRAPH_DEPTH    = 2

-

-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent

-# background. This is disabled by default, because dot on Windows does not

-# seem to support this out of the box. Warning: Depending on the platform used,

-# enabling this option may lead to badly anti-aliased labels on the edges of

-# a graph (i.e. they become hard to read).

-

-DOT_TRANSPARENT        = YES

-

-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output

-# files in one run (i.e. multiple -o and -T options on the command line). This

-# makes dot run faster, but since only newer versions of dot (>1.8.10)

-# support this, this feature is disabled by default.

-

-DOT_MULTI_TARGETS      = NO

-

-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will

-# generate a legend page explaining the meaning of the various boxes and

-# arrows in the dot generated graphs.

-

-GENERATE_LEGEND        = YES

-

-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will

-# remove the intermediate dot files that are used to generate

-# the various graphs.

-

-DOT_CLEANUP            = YES

+# Doxyfile 1.6.2
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "LUFA Library - Audio Input Host Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         = 0.0.0
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it parses.
+# With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this tag.
+# The format is ext=language, where ext is a file extension, and language is one of
+# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
+# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
+# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
+# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
+# doxygen. The layout file controls the global structure of the generated output files
+# in an output format independent way. The create the layout file that represents
+# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
+# file name after the option, if omitted DoxygenLayout.xml will be used as the name
+# of the layout file.
+
+LAYOUT_FILE            =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       = 
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = YES
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        =
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
+# are set, an additional index file will be generated that can be used as input for
+# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
+# HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
+# For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+#  plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = YES
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      = 
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = NO
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/Demos/Host/ClassDriver/AudioInputHost/makefile b/Demos/Host/ClassDriver/AudioInputHost/makefile
index ab6e391dd..8bfc2d130 100644
--- a/Demos/Host/ClassDriver/AudioInputHost/makefile
+++ b/Demos/Host/ClassDriver/AudioInputHost/makefile
@@ -1,714 +1,714 @@
-# Hey Emacs, this is a -*- makefile -*-

-#----------------------------------------------------------------------------

-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.

-#  >> Modified for use with the LUFA project. <<

-#

-# Released to the Public Domain

-#

-# Additional material for this makefile was written by:

-# Peter Fleury

-# Tim Henigan

-# Colin O'Flynn

-# Reiner Patommel

-# Markus Pfaff

-# Sander Pool

-# Frederik Rouleau

-# Carlos Lamas

-# Dean Camera

-# Opendous Inc.

-# Denver Gingerich

-#

-#----------------------------------------------------------------------------

-# On command line:

-#

-# make all = Make software.

-#

-# make clean = Clean out built project files.

-#

-# make coff = Convert ELF to AVR COFF.

-#

-# make extcoff = Convert ELF to AVR Extended COFF.

-#

-# make program = Download the hex file to the device, using avrdude.

-#                Please customize the avrdude settings below first!

-#

-# make dfu = Download the hex file to the device, using dfu-programmer (must

-#            have dfu-programmer installed).

-#

-# make flip = Download the hex file to the device, using Atmel FLIP (must

-#             have Atmel FLIP installed).

-#

-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

-#               (must have dfu-programmer installed).

-#

-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

-#                (must have Atmel FLIP installed).

-#

-# make doxygen = Generate DoxyGen documentation for the project (must have

-#                DoxyGen installed)

-#

-# make debug = Start either simulavr or avarice as specified for debugging,

-#              with avr-gdb or avr-insight as the front end for debugging.

-#

-# make filename.s = Just compile filename.c into the assembler code only.

-#

-# make filename.i = Create a preprocessed source file for use in submitting

-#                   bug reports to the GCC project.

-#

-# To rebuild project do "make clean" then "make all".

-#----------------------------------------------------------------------------

-

-

-# MCU name

-MCU = at90usb1287

-

-

-# Target architecture (see library "Board Types" documentation).

-ARCH = AVR8

-

-

-# Target board (see library "Board Types" documentation, NONE for projects not requiring

-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called

-# "Board" inside the application directory.

-BOARD = USBKEY

-

-

-# Processor frequency.

-#     This will define a symbol, F_CPU, in all source code files equal to the

-#     processor frequency in Hz. You can then use this symbol in your source code to

-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

-#     automatically to create a 32-bit value in your source code.

-#

-#     This will be an integer division of F_USB below, as it is sourced by

-#     F_USB after it has run through any CPU prescalers. Note that this value

-#     does not *change* the processor frequency - it should merely be updated to

-#     reflect the processor speed set externally so that the code can use accurate

-#     software delays.

-F_CPU = 8000000

-

-

-# Input clock frequency.

-#     This will define a symbol, F_USB, in all source code files equal to the

-#     input clock frequency (before any prescaling is performed) in Hz. This value may

-#     differ from F_CPU if prescaling is used on the latter, and is required as the

-#     raw input clock is fed directly to the PLL sections of the AVR for high speed

-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'

-#     at the end, this will be done automatically to create a 32-bit value in your

-#     source code.

-#

-#     If no clock division is performed on the input clock inside the AVR (via the

-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_USB = $(F_CPU)

-

-

-# Output format. (can be srec, ihex, binary)

-FORMAT = ihex

-

-

-# Target file name (without extension).

-TARGET = AudioInputHost

-

-

-# Object files directory

-#     To put object files in current directory, use a dot (.), do NOT make

-#     this an empty or blank macro!

-OBJDIR = .

-

-

-# Path to the LUFA library

-LUFA_PATH = ../../../..

-

-

-# LUFA library compile-time options and predefined tokens

-LUFA_OPTS  = -D USB_HOST_ONLY

-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"

-

-

-# Create the LUFA source path variables by including the LUFA root makefile

-include $(LUFA_PATH)/LUFA/makefile

-

-

-# List C source files here. (C dependencies are automatically generated.)

-SRC = $(TARGET).c                                                 \

-	  $(LUFA_SRC_USB)                                             \

-	  $(LUFA_SRC_USBCLASS)                                        \

-	  $(LUFA_SRC_SERIAL)

-

-

-# List C++ source files here. (C dependencies are automatically generated.)

-CPPSRC =

-

-

-# List Assembler source files here.

-#     Make them always end in a capital .S.  Files ending in a lowercase .s

-#     will not be considered source files but generated files (assembler

-#     output from the compiler), and will be deleted upon "make clean"!

-#     Even though the DOS/Win* filesystem matches both .s and .S the same,

-#     it will preserve the spelling of the filenames, and gcc itself does

-#     care about how the name is spelled on its command-line.

-ASRC =

-

-

-# Optimization level, can be [0, 1, 2, 3, s].

-#     0 = turn off optimization. s = optimize for size.

-#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)

-OPT = s

-

-

-# Debugging format.

-#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.

-#     AVR Studio 4.10 requires dwarf-2.

-#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.

-DEBUG = dwarf-2

-

-

-# List any extra directories to look for include files here.

-#     Each directory must be seperated by a space.

-#     Use forward slashes for directory separators.

-#     For a directory that has spaces, enclose it in quotes.

-EXTRAINCDIRS = $(LUFA_PATH)/

-

-

-# Compiler flag to set the C Standard level.

-#     c89   = "ANSI" C

-#     gnu89 = c89 plus GCC extensions

-#     c99   = ISO C99 standard (not yet fully implemented)

-#     gnu99 = c99 plus GCC extensions

-CSTANDARD = -std=c99

-

-

-# Place -D or -U options here for C sources

-CDEFS  = -DF_CPU=$(F_CPU)UL

-CDEFS += -DF_USB=$(F_USB)UL

-CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)

-CDEFS += $(LUFA_OPTS)

-

-

-# Place -D or -U options here for ASM sources

-ADEFS  = -DF_CPU=$(F_CPU)

-ADEFS += -DF_USB=$(F_USB)UL

-ADEFS += -DBOARD=BOARD_$(BOARD)

-ADEFS += $(LUFA_OPTS)

-

-# Place -D or -U options here for C++ sources

-CPPDEFS  = -DF_CPU=$(F_CPU)UL

-CPPDEFS += -DF_USB=$(F_USB)UL

-CPPDEFS += -DBOARD=BOARD_$(BOARD)

-CPPDEFS += $(LUFA_OPTS)

-#CPPDEFS += -D__STDC_LIMIT_MACROS

-#CPPDEFS += -D__STDC_CONSTANT_MACROS

-

-

-

-#---------------- Compiler Options C ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CFLAGS = -g$(DEBUG)

-CFLAGS += $(CDEFS)

-CFLAGS += -O$(OPT)

-CFLAGS += -funsigned-char

-CFLAGS += -funsigned-bitfields

-CFLAGS += -ffunction-sections

-CFLAGS += -fno-inline-small-functions

-CFLAGS += -fpack-struct

-CFLAGS += -fshort-enums

-CFLAGS += -fno-strict-aliasing

-CFLAGS += -Wall

-CFLAGS += -Wstrict-prototypes

-#CFLAGS += -mshort-calls

-#CFLAGS += -fno-unit-at-a-time

-#CFLAGS += -Wundef

-#CFLAGS += -Wunreachable-code

-#CFLAGS += -Wsign-compare

-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-CFLAGS += $(CSTANDARD)

-

-

-#---------------- Compiler Options C++ ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CPPFLAGS = -g$(DEBUG)

-CPPFLAGS += $(CPPDEFS)

-CPPFLAGS += -O$(OPT)

-CPPFLAGS += -funsigned-char

-CPPFLAGS += -funsigned-bitfields

-CPPFLAGS += -fpack-struct

-CPPFLAGS += -fshort-enums

-CPPFLAGS += -fno-exceptions

-CPPFLAGS += -Wall

-CPPFLAGS += -Wundef

-#CPPFLAGS += -mshort-calls

-#CPPFLAGS += -fno-unit-at-a-time

-#CPPFLAGS += -Wstrict-prototypes

-#CPPFLAGS += -Wunreachable-code

-#CPPFLAGS += -Wsign-compare

-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-#CPPFLAGS += $(CSTANDARD)

-

-

-#---------------- Assembler Options ----------------

-#  -Wa,...:   tell GCC to pass this to the assembler.

-#  -adhlns:   create listing

-#  -gstabs:   have the assembler create line number information; note that

-#             for use in COFF files, additional information about filenames

-#             and function names needs to be present in the assembler source

-#             files -- see avr-libc docs [FIXME: not yet described there]

-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex

-#       dump that will be displayed for a given single line of source input.

-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

-

-

-#---------------- Library Options ----------------

-# Minimalistic printf version

-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min

-

-# Floating point printf version (requires MATH_LIB = -lm below)

-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt

-

-# If this is left blank, then it will use the Standard printf version.

-PRINTF_LIB =

-#PRINTF_LIB = $(PRINTF_LIB_MIN)

-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)

-

-

-# Minimalistic scanf version

-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min

-

-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)

-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt

-

-# If this is left blank, then it will use the Standard scanf version.

-SCANF_LIB =

-#SCANF_LIB = $(SCANF_LIB_MIN)

-#SCANF_LIB = $(SCANF_LIB_FLOAT)

-

-

-MATH_LIB = -lm

-

-

-# List any extra directories to look for libraries here.

-#     Each directory must be seperated by a space.

-#     Use forward slashes for directory separators.

-#     For a directory that has spaces, enclose it in quotes.

-EXTRALIBDIRS =

-

-

-

-#---------------- External Memory Options ----------------

-

-# 64 KB of external RAM, starting after internal RAM (ATmega128!),

-# used for variables (.data/.bss) and heap (malloc()).

-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff

-

-# 64 KB of external RAM, starting after internal RAM (ATmega128!),

-# only used for heap (malloc()).

-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff

-

-EXTMEMOPTS =

-

-

-

-#---------------- Linker Options ----------------

-#  -Wl,...:     tell GCC to pass this to linker.

-#    -Map:      create map file

-#    --cref:    add cross reference to  map file

-LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref

-LDFLAGS += -Wl,--relax

-LDFLAGS += -Wl,--gc-sections

-LDFLAGS += $(EXTMEMOPTS)

-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))

-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)

-#LDFLAGS += -T linker_script.x

-

-

-

-#---------------- Programming Options (avrdude) ----------------

-

-# Programming hardware

-# Type: avrdude -c ?

-# to get a full listing.

-#

-AVRDUDE_PROGRAMMER = jtagmkII

-

-# com1 = serial port. Use lpt1 to connect to parallel port.

-AVRDUDE_PORT = usb

-

-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex

-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep

-

-

-# Uncomment the following if you want avrdude's erase cycle counter.

-# Note that this counter needs to be initialized first using -Yn,

-# see avrdude manual.

-#AVRDUDE_ERASE_COUNTER = -y

-

-# Uncomment the following if you do /not/ wish a verification to be

-# performed after programming the device.

-#AVRDUDE_NO_VERIFY = -V

-

-# Increase verbosity level.  Please use this when submitting bug

-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>

-# to submit bug reports.

-#AVRDUDE_VERBOSE = -v -v

-

-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)

-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)

-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)

-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)

-

-

-

-#---------------- Debugging Options ----------------

-

-# For simulavr only - target MCU frequency.

-DEBUG_MFREQ = $(F_CPU)

-

-# Set the DEBUG_UI to either gdb or insight.

-# DEBUG_UI = gdb

-DEBUG_UI = insight

-

-# Set the debugging back-end to either avarice, simulavr.

-DEBUG_BACKEND = avarice

-#DEBUG_BACKEND = simulavr

-

-# GDB Init Filename.

-GDBINIT_FILE = __avr_gdbinit

-

-# When using avarice settings for the JTAG

-JTAG_DEV = /dev/com1

-

-# Debugging port used to communicate between GDB / avarice / simulavr.

-DEBUG_PORT = 4242

-

-# Debugging host used to communicate between GDB / avarice / simulavr, normally

-#     just set to localhost unless doing some sort of crazy debugging when

-#     avarice is running on a different computer.

-DEBUG_HOST = localhost

-

-

-

-#============================================================================

-

-

-# Define programs and commands.

-SHELL = sh

-CC = avr-gcc

-OBJCOPY = avr-objcopy

-OBJDUMP = avr-objdump

-SIZE = avr-size

-AR = avr-ar rcs

-NM = avr-nm

-AVRDUDE = avrdude

-REMOVE = rm -f

-REMOVEDIR = rm -rf

-COPY = cp

-WINSHELL = cmd

-

-

-# Define Messages

-# English

-MSG_ERRORS_NONE = Errors: none

-MSG_BEGIN = -------- begin --------

-MSG_END = --------  end  --------

-MSG_SIZE_BEFORE = Size before:

-MSG_SIZE_AFTER = Size after:

-MSG_COFF = Converting to AVR COFF:

-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:

-MSG_FLASH = Creating load file for Flash:

-MSG_EEPROM = Creating load file for EEPROM:

-MSG_EXTENDED_LISTING = Creating Extended Listing:

-MSG_SYMBOL_TABLE = Creating Symbol Table:

-MSG_LINKING = Linking:

-MSG_COMPILING = Compiling C:

-MSG_COMPILING_CPP = Compiling C++:

-MSG_ASSEMBLING = Assembling:

-MSG_CLEANING = Cleaning project:

-MSG_CREATING_LIBRARY = Creating library:

-

-

-

-

-# Define all object files.

-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

-

-# Define all listing files.

-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

-

-

-# Compiler flags to generate dependency files.

-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d

-

-

-# Combine all necessary flags and optional flags.

-# Add target processor to flags.

-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)

-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)

-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)

-

-

-

-

-

-# Default target.

-all: begin gccversion sizebefore build sizeafter end

-

-# Change the build target to build a HEX file or a library.

-build: elf hex eep lss sym

-#build: lib

-

-

-elf: $(TARGET).elf

-hex: $(TARGET).hex

-eep: $(TARGET).eep

-lss: $(TARGET).lss

-sym: $(TARGET).sym

-LIBNAME=lib$(TARGET).a

-lib: $(LIBNAME)

-

-

-

-# Eye candy.

-# AVR Studio 3.x does not check make's exit code but relies on

-# the following magic strings to be generated by the compile job.

-begin:

-	@echo

-	@echo $(MSG_BEGIN)

-

-end:

-	@echo $(MSG_END)

-	@echo

-

-

-# Display size of file.

-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex

-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf

-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )

-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )

-

-

-sizebefore:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-sizeafter:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-

-

-# Display compiler version information.

-gccversion :

-	@$(CC) --version

-

-

-# Program the device.

-program: $(TARGET).hex $(TARGET).eep

-	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)

-

-flip: $(TARGET).hex

-	batchisp -hardware usb -device $(MCU) -operation erase f

-	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-

-dfu: $(TARGET).hex

-	dfu-programmer $(MCU) erase

-	dfu-programmer $(MCU) flash $(TARGET).hex

-	dfu-programmer $(MCU) reset

-

-flip-ee: $(TARGET).hex $(TARGET).eep

-	$(COPY) $(TARGET).eep $(TARGET)eep.hex

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-	$(REMOVE) $(TARGET)eep.hex

-

-dfu-ee: $(TARGET).hex $(TARGET).eep

-	dfu-programmer $(MCU) eeprom-flash $(TARGET).eep

-	dfu-programmer $(MCU) reset

-

-

-# Generate avr-gdb config/init file which does the following:

-#     define the reset signal, load the target file, connect to target, and set

-#     a breakpoint at main().

-gdb-config:

-	@$(REMOVE) $(GDBINIT_FILE)

-	@echo define reset >> $(GDBINIT_FILE)

-	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)

-	@echo end >> $(GDBINIT_FILE)

-	@echo file $(TARGET).elf >> $(GDBINIT_FILE)

-	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)

-ifeq ($(DEBUG_BACKEND),simulavr)

-	@echo load  >> $(GDBINIT_FILE)

-endif

-	@echo break main >> $(GDBINIT_FILE)

-

-debug: gdb-config $(TARGET).elf

-ifeq ($(DEBUG_BACKEND), avarice)

-	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.

-	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \

-	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)

-	@$(WINSHELL) /c pause

-

-else

-	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \

-	$(DEBUG_MFREQ) --port $(DEBUG_PORT)

-endif

-	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)

-

-

-

-

-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.

-COFFCONVERT = $(OBJCOPY) --debugging

-COFFCONVERT += --change-section-address .data-0x800000

-COFFCONVERT += --change-section-address .bss-0x800000

-COFFCONVERT += --change-section-address .noinit-0x800000

-COFFCONVERT += --change-section-address .eeprom-0x810000

-

-

-

-coff: $(TARGET).elf

-	@echo

-	@echo $(MSG_COFF) $(TARGET).cof

-	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof

-

-

-extcoff: $(TARGET).elf

-	@echo

-	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof

-	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof

-

-

-

-# Create final output files (.hex, .eep) from ELF output file.

-%.hex: %.elf

-	@echo

-	@echo $(MSG_FLASH) $@

-	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@

-

-%.eep: %.elf

-	@echo

-	@echo $(MSG_EEPROM) $@

-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \

-	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0

-

-# Create extended listing file from ELF output file.

-%.lss: %.elf

-	@echo

-	@echo $(MSG_EXTENDED_LISTING) $@

-	$(OBJDUMP) -h -S -z $< > $@

-

-# Create a symbol table from ELF output file.

-%.sym: %.elf

-	@echo

-	@echo $(MSG_SYMBOL_TABLE) $@

-	$(NM) -n $< > $@

-

-

-

-# Create library from object files.

-.SECONDARY : $(TARGET).a

-.PRECIOUS : $(OBJ)

-%.a: $(OBJ)

-	@echo

-	@echo $(MSG_CREATING_LIBRARY) $@

-	$(AR) $@ $(OBJ)

-

-

-# Link: create ELF output file from object files.

-.SECONDARY : $(TARGET).elf

-.PRECIOUS : $(OBJ)

-%.elf: $(OBJ)

-	@echo

-	@echo $(MSG_LINKING) $@

-	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)

-

-

-# Compile: create object files from C source files.

-$(OBJDIR)/%.o : %.c

-	@echo

-	@echo $(MSG_COMPILING) $<

-	$(CC) -c $(ALL_CFLAGS) $< -o $@

-

-

-# Compile: create object files from C++ source files.

-$(OBJDIR)/%.o : %.cpp

-	@echo

-	@echo $(MSG_COMPILING_CPP) $<

-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@

-

-

-# Compile: create assembler files from C source files.

-%.s : %.c

-	$(CC) -S $(ALL_CFLAGS) $< -o $@

-

-

-# Compile: create assembler files from C++ source files.

-%.s : %.cpp

-	$(CC) -S $(ALL_CPPFLAGS) $< -o $@

-

-

-# Assemble: create object files from assembler source files.

-$(OBJDIR)/%.o : %.S

-	@echo

-	@echo $(MSG_ASSEMBLING) $<

-	$(CC) -c $(ALL_ASFLAGS) $< -o $@

-

-

-# Create preprocessed source for use in sending a bug report.

-%.i : %.c

-	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@

-

-

-# Target: clean project.

-clean: begin clean_list end

-

-clean_list :

-	@echo

-	@echo $(MSG_CLEANING)

-	$(REMOVE) $(TARGET).hex

-	$(REMOVE) $(TARGET).eep

-	$(REMOVE) $(TARGET).cof

-	$(REMOVE) $(TARGET).elf

-	$(REMOVE) $(TARGET).map

-	$(REMOVE) $(TARGET).sym

-	$(REMOVE) $(TARGET).lss

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

-	$(REMOVE) $(SRC:.c=.s)

-	$(REMOVE) $(SRC:.c=.d)

-	$(REMOVE) $(SRC:.c=.i)

-	$(REMOVEDIR) .dep

-

-doxygen:

-	@echo Generating Project Documentation...

-	@doxygen Doxygen.conf

-	@echo Documentation Generation Complete.

-

-clean_doxygen:

-	rm -rf Documentation

-

-# Create object files directory

-$(shell mkdir $(OBJDIR) 2>/dev/null)

-

-

-# Include the dependency files.

--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)

-

-

-# Listing of phony targets.

-.PHONY : all begin finish end sizebefore sizeafter gccversion \

-build elf hex eep lss sym coff extcoff doxygen clean          \

-clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \

-debug gdb-config

-

+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+#  >> Modified for use with the LUFA project. <<
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+# Dean Camera
+# Opendous Inc.
+# Denver Gingerich
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+#                Please customize the avrdude settings below first!
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make doxygen = Generate DoxyGen documentation for the project (must have
+#                DoxyGen installed)
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+
+# MCU name
+MCU = at90usb1287
+
+
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
+# "Board" inside the application directory.
+BOARD = USBKEY
+
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 8000000
+
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+
+# Target file name (without extension).
+TARGET = AudioInputHost
+
+
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+OBJDIR = .
+
+
+# Path to the LUFA library
+LUFA_PATH = ../../../..
+
+
+# LUFA library compile-time options and predefined tokens
+LUFA_OPTS  = -D USB_HOST_ONLY
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+
+
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(TARGET).c                                                 \
+	  $(LUFA_SRC_USB)                                             \
+	  $(LUFA_SRC_USBCLASS)                                        \
+	  $(LUFA_SRC_SERIAL)
+
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+
+# List Assembler source files here.
+#     Make them always end in a capital .S.  Files ending in a lowercase .s
+#     will not be considered source files but generated files (assembler
+#     output from the compiler), and will be deleted upon "make clean"!
+#     Even though the DOS/Win* filesystem matches both .s and .S the same,
+#     it will preserve the spelling of the filenames, and gcc itself does
+#     care about how the name is spelled on its command-line.
+ASRC =
+
+
+# Optimization level, can be [0, 1, 2, 3, s].
+#     0 = turn off optimization. s = optimize for size.
+#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = s
+
+
+# Debugging format.
+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+#     AVR Studio 4.10 requires dwarf-2.
+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+
+# List any extra directories to look for include files here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = $(LUFA_PATH)/
+
+
+# Compiler flag to set the C Standard level.
+#     c89   = "ANSI" C
+#     gnu89 = c89 plus GCC extensions
+#     c99   = ISO C99 standard (not yet fully implemented)
+#     gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=c99
+
+
+# Place -D or -U options here for C sources
+CDEFS  = -DF_CPU=$(F_CPU)UL
+CDEFS += -DF_USB=$(F_USB)UL
+CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
+CDEFS += $(LUFA_OPTS)
+
+
+# Place -D or -U options here for ASM sources
+ADEFS  = -DF_CPU=$(F_CPU)
+ADEFS += -DF_USB=$(F_USB)UL
+ADEFS += -DBOARD=BOARD_$(BOARD)
+ADEFS += $(LUFA_OPTS)
+
+# Place -D or -U options here for C++ sources
+CPPDEFS  = -DF_CPU=$(F_CPU)UL
+CPPDEFS += -DF_USB=$(F_USB)UL
+CPPDEFS += -DBOARD=BOARD_$(BOARD)
+CPPDEFS += $(LUFA_OPTS)
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+
+
+#---------------- Compiler Options C ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
+CFLAGS += -fno-inline-small-functions
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+CFLAGS += -fno-strict-aliasing
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+
+
+#---------------- Compiler Options C++ ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CPPFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+
+
+#---------------- Assembler Options ----------------
+#  -Wa,...:   tell GCC to pass this to the assembler.
+#  -adhlns:   create listing
+#  -gstabs:   have the assembler create line number information; note that
+#             for use in COFF files, additional information about filenames
+#             and function names needs to be present in the assembler source
+#             files -- see avr-libc docs [FIXME: not yet described there]
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
+#       dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB =
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB =
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+
+MATH_LIB = -lm
+
+
+# List any extra directories to look for libraries here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
+#---------------- Linker Options ----------------
+#  -Wl,...:     tell GCC to pass this to linker.
+#    -Map:      create map file
+#    --cref:    add cross reference to  map file
+LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = jtagmkII
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = usb
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+#     just set to localhost unless doing some sort of crazy debugging when
+#     avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = --------  end  --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+
+
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+
+
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex eep lss sym
+#build: lib
+
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@echo
+	@echo $(MSG_BEGIN)
+
+end:
+	@echo $(MSG_END)
+	@echo
+
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
+MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
+FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
+
+
+sizebefore:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+sizeafter:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+
+
+# Display compiler version information.
+gccversion :
+	@$(CC) --version
+
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+flip: $(TARGET).hex
+	batchisp -hardware usb -device $(MCU) -operation erase f
+	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(TARGET).hex
+	dfu-programmer $(MCU) erase
+	dfu-programmer $(MCU) flash $(TARGET).hex
+	dfu-programmer $(MCU) reset
+
+flip-ee: $(TARGET).hex $(TARGET).eep
+	$(COPY) $(TARGET).eep $(TARGET)eep.hex
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+	$(REMOVE) $(TARGET)eep.hex
+
+dfu-ee: $(TARGET).hex $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
+	dfu-programmer $(MCU) reset
+
+
+# Generate avr-gdb config/init file which does the following:
+#     define the reset signal, load the target file, connect to target, and set
+#     a breakpoint at main().
+gdb-config:
+	@$(REMOVE) $(GDBINIT_FILE)
+	@echo define reset >> $(GDBINIT_FILE)
+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+	@echo end >> $(GDBINIT_FILE)
+	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+	@echo load  >> $(GDBINIT_FILE)
+endif
+	@echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+	@$(WINSHELL) /c pause
+
+else
+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+
+
+coff: $(TARGET).elf
+	@echo
+	@echo $(MSG_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+	@echo
+	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
+
+%.eep: %.elf
+	@echo
+	@echo $(MSG_EEPROM) $@
+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+	@echo
+	@echo $(MSG_EXTENDED_LISTING) $@
+	$(OBJDUMP) -h -S -z $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+	@echo
+	@echo $(MSG_SYMBOL_TABLE) $@
+	$(NM) -n $< > $@
+
+
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+	@echo
+	@echo $(MSG_CREATING_LIBRARY) $@
+	$(AR) $@ $(OBJ)
+
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+	@echo
+	@echo $(MSG_LINKING) $@
+	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+	@echo
+	@echo $(MSG_COMPILING) $<
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+	@echo
+	@echo $(MSG_COMPILING_CPP) $<
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+	$(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+	@echo
+	@echo $(MSG_ASSEMBLING) $<
+	$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+	@echo
+	@echo $(MSG_CLEANING)
+	$(REMOVE) $(TARGET).hex
+	$(REMOVE) $(TARGET).eep
+	$(REMOVE) $(TARGET).cof
+	$(REMOVE) $(TARGET).elf
+	$(REMOVE) $(TARGET).map
+	$(REMOVE) $(TARGET).sym
+	$(REMOVE) $(TARGET).lss
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+	$(REMOVE) $(SRC:.c=.s)
+	$(REMOVE) $(SRC:.c=.d)
+	$(REMOVE) $(SRC:.c=.i)
+	$(REMOVEDIR) .dep
+
+doxygen:
+	@echo Generating Project Documentation...
+	@doxygen Doxygen.conf
+	@echo Documentation Generation Complete.
+
+clean_doxygen:
+	rm -rf Documentation
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff doxygen clean          \
+clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
+debug gdb-config
+
diff --git a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c
index 0262f597f..b4a7a3b2b 100644
--- a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c
+++ b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c
@@ -1,249 +1,249 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Main source file for the AudioOutputHost demo. This file contains the main tasks of

- *  the demo and is responsible for the initial application hardware configuration.

- */

-

-#include "AudioOutputHost.h"

-

-/** LUFA Audio Class driver interface configuration and state information. This structure is

- *  passed to all Audio Class driver functions, so that multiple instances of the same class

- *  within a device can be differentiated from one another.

- */

-USB_ClassInfo_Audio_Host_t Speaker_Audio_Interface =

-	{

-		.Config =

-			{

-				.DataOUTPipeNumber = 1,

-			},

-	};

-

-

-/** Main program entry point. This routine configures the hardware required by the application, then

- *  enters a loop to run the application tasks in sequence.

- */

-int main(void)

-{

-	SetupHardware();

-

-	puts_P(PSTR(ESC_FG_CYAN "Audio Output Host Demo running.\r\n" ESC_FG_WHITE));

-

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-	sei();

-

-	for (;;)

-	{

-		switch (USB_HostState)

-		{

-			case HOST_STATE_Addressed:

-				LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);

-

-				uint16_t ConfigDescriptorSize;

-				uint8_t  ConfigDescriptorData[512];

-

-				if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,

-				                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)

-				{

-					puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));

-					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-					USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-					break;

-				}

-

-				if (Audio_Host_ConfigurePipes(&Speaker_Audio_Interface,

-				                              ConfigDescriptorSize, ConfigDescriptorData) != AUDIO_ENUMERROR_NoError)

-				{

-					puts_P(PSTR("Attached Device Not a Valid Audio Output Device.\r\n"));

-					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-					USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-					break;

-				}

-

-				if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)

-				{

-					puts_P(PSTR("Error Setting Device Configuration.\r\n"));

-					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-					USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-					break;

-				}

-

-				if (Audio_Host_StartStopStreaming(&Speaker_Audio_Interface, true) != HOST_SENDCONTROL_Successful)

-				{

-					puts_P(PSTR("Error Enabling Audio Stream.\r\n"));

-					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-					USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-					break;

-				}

-				

-				USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);

-				if (Audio_Host_GetSetEndpointProperty(&Speaker_Audio_Interface, Speaker_Audio_Interface.Config.DataOUTPipeNumber,

-				                                      AUDIO_REQ_SetCurrent, AUDIO_EPCONTROL_SamplingFreq,

-				                                      sizeof(SampleRate), &SampleRate) != HOST_SENDCONTROL_Successful)

-				{

-					puts_P(PSTR("Error Setting Audio Sampling Frequency.\r\n"));

-					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-					USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-					break;				

-				}

-

-				/* Sample reload timer initialization */

-				TIMSK0  = (1 << OCIE0A);

-				OCR0A   = ((F_CPU / 8 / 48000) - 1);

-				TCCR0A  = (1 << WGM01);  // CTC mode

-				TCCR0B  = (1 << CS01);   // Fcpu/8 speed

-

-				puts_P(PSTR("Audio Device Enumerated.\r\n"));

-				LEDs_SetAllLEDs(LEDMASK_USB_READY);

-				USB_HostState = HOST_STATE_Configured;

-				break;

-			case HOST_STATE_Configured:

-				/* Do nothing - audio stream is handled by the timer interrupt routine */

-				break;

-		}

-

-		Audio_Host_USBTask(&Speaker_Audio_Interface);

-		USB_USBTask();

-	}

-}

-

-/** ISR to handle the reloading of the PWM timer with the next sample. */

-ISR(TIMER0_COMPA_vect, ISR_BLOCK)

-{

-	uint8_t PrevPipe = Pipe_GetCurrentPipe();

-

-	/* Check that the USB bus is ready for the next sample to write */

-	if (Audio_Host_IsReadyForNextSample(&Speaker_Audio_Interface))

-	{

-		int16_t AudioSample;

-

-		#if defined(USE_TEST_TONE)

-			static uint8_t SquareWaveSampleCount;

-			static int16_t CurrentWaveValue;

-			

-			/* In test tone mode, generate a square wave at 1/256 of the sample rate */

-			if (SquareWaveSampleCount++ == 0xFF)

-			  CurrentWaveValue ^= 0x8000;

-			

-			/* Only generate audio if the board button is being pressed */

-			AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;

-		#else

-			/* Audio sample is ADC value scaled to fit the entire range */

-			AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());

-

-			#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)

-			/* Microphone is biased to half rail voltage, subtract the bias from the sample value */

-			AudioSample -= (SAMPLE_MAX_RANGE / 2);

-			#endif

-		#endif

-		

-		Audio_Host_WriteSample16(&Speaker_Audio_Interface, AudioSample);	

-		Audio_Host_WriteSample16(&Speaker_Audio_Interface, AudioSample);

-	}

-	

-	Pipe_SelectPipe(PrevPipe);

-}

-

-/** Configures the board hardware and chip peripherals for the demo's functionality. */

-void SetupHardware(void)

-{

-	/* Disable watchdog if enabled by bootloader/fuses */

-	MCUSR &= ~(1 << WDRF);

-	wdt_disable();

-

-	/* Disable clock division */

-	clock_prescale_set(clock_div_1);

-

-	/* Hardware Initialization */

-	Serial_Init(9600, false);

-	LEDs_Init();

-	Buttons_Init();

-	ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);

-	ADC_SetupChannel(MIC_IN_ADC_CHANNEL);

-	USB_Init();

-

-	/* Create a stdio stream for the serial port for stdin and stdout */

-	Serial_CreateStream(NULL);

-}

-

-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and

- *  starts the library USB task to begin the enumeration and USB management process.

- */

-void EVENT_USB_Host_DeviceAttached(void)

-{

-	puts_P(PSTR("Device Attached.\r\n"));

-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);

-}

-

-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and

- *  stops the library USB task management process.

- */

-void EVENT_USB_Host_DeviceUnattached(void)

-{

-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-}

-

-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully

- *  enumerated by the host and is now ready to be used by the application.

- */

-void EVENT_USB_Host_DeviceEnumerationComplete(void)

-{

-	LEDs_SetAllLEDs(LEDMASK_USB_READY);

-}

-

-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */

-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)

-{

-	USB_Disable();

-

-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"

-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-	for(;;);

-}

-

-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while

- *  enumerating an attached USB device.

- */

-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,

-                                            const uint8_t SubErrorCode)

-{

-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"

-	                         " -- Error Code %d\r\n"

-	                         " -- Sub Error Code %d\r\n"

-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-}

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the AudioOutputHost demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "AudioOutputHost.h"
+
+/** LUFA Audio Class driver interface configuration and state information. This structure is
+ *  passed to all Audio Class driver functions, so that multiple instances of the same class
+ *  within a device can be differentiated from one another.
+ */
+USB_ClassInfo_Audio_Host_t Speaker_Audio_Interface =
+	{
+		.Config =
+			{
+				.DataOUTPipeNumber = 1,
+			},
+	};
+
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	puts_P(PSTR(ESC_FG_CYAN "Audio Output Host Demo running.\r\n" ESC_FG_WHITE));
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	sei();
+
+	for (;;)
+	{
+		switch (USB_HostState)
+		{
+			case HOST_STATE_Addressed:
+				LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+				uint16_t ConfigDescriptorSize;
+				uint8_t  ConfigDescriptorData[512];
+
+				if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
+				                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
+				{
+					puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;
+				}
+
+				if (Audio_Host_ConfigurePipes(&Speaker_Audio_Interface,
+				                              ConfigDescriptorSize, ConfigDescriptorData) != AUDIO_ENUMERROR_NoError)
+				{
+					puts_P(PSTR("Attached Device Not a Valid Audio Output Device.\r\n"));
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;
+				}
+
+				if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
+				{
+					puts_P(PSTR("Error Setting Device Configuration.\r\n"));
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;
+				}
+
+				if (Audio_Host_StartStopStreaming(&Speaker_Audio_Interface, true) != HOST_SENDCONTROL_Successful)
+				{
+					puts_P(PSTR("Error Enabling Audio Stream.\r\n"));
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;
+				}
+				
+				USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);
+				if (Audio_Host_GetSetEndpointProperty(&Speaker_Audio_Interface, Speaker_Audio_Interface.Config.DataOUTPipeNumber,
+				                                      AUDIO_REQ_SetCurrent, AUDIO_EPCONTROL_SamplingFreq,
+				                                      sizeof(SampleRate), &SampleRate) != HOST_SENDCONTROL_Successful)
+				{
+					puts_P(PSTR("Error Setting Audio Sampling Frequency.\r\n"));
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;				
+				}
+
+				/* Sample reload timer initialization */
+				TIMSK0  = (1 << OCIE0A);
+				OCR0A   = ((F_CPU / 8 / 48000) - 1);
+				TCCR0A  = (1 << WGM01);  // CTC mode
+				TCCR0B  = (1 << CS01);   // Fcpu/8 speed
+
+				puts_P(PSTR("Audio Device Enumerated.\r\n"));
+				LEDs_SetAllLEDs(LEDMASK_USB_READY);
+				USB_HostState = HOST_STATE_Configured;
+				break;
+			case HOST_STATE_Configured:
+				/* Do nothing - audio stream is handled by the timer interrupt routine */
+				break;
+		}
+
+		Audio_Host_USBTask(&Speaker_Audio_Interface);
+		USB_USBTask();
+	}
+}
+
+/** ISR to handle the reloading of the PWM timer with the next sample. */
+ISR(TIMER0_COMPA_vect, ISR_BLOCK)
+{
+	uint8_t PrevPipe = Pipe_GetCurrentPipe();
+
+	/* Check that the USB bus is ready for the next sample to write */
+	if (Audio_Host_IsReadyForNextSample(&Speaker_Audio_Interface))
+	{
+		int16_t AudioSample;
+
+		#if defined(USE_TEST_TONE)
+			static uint8_t SquareWaveSampleCount;
+			static int16_t CurrentWaveValue;
+			
+			/* In test tone mode, generate a square wave at 1/256 of the sample rate */
+			if (SquareWaveSampleCount++ == 0xFF)
+			  CurrentWaveValue ^= 0x8000;
+			
+			/* Only generate audio if the board button is being pressed */
+			AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;
+		#else
+			/* Audio sample is ADC value scaled to fit the entire range */
+			AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());
+
+			#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)
+			/* Microphone is biased to half rail voltage, subtract the bias from the sample value */
+			AudioSample -= (SAMPLE_MAX_RANGE / 2);
+			#endif
+		#endif
+		
+		Audio_Host_WriteSample16(&Speaker_Audio_Interface, AudioSample);	
+		Audio_Host_WriteSample16(&Speaker_Audio_Interface, AudioSample);
+	}
+	
+	Pipe_SelectPipe(PrevPipe);
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+
+	/* Hardware Initialization */
+	Serial_Init(9600, false);
+	LEDs_Init();
+	Buttons_Init();
+	ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
+	ADC_SetupChannel(MIC_IN_ADC_CHANNEL);
+	USB_Init();
+
+	/* Create a stdio stream for the serial port for stdin and stdout */
+	Serial_CreateStream(NULL);
+}
+
+/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Host_DeviceAttached(void)
+{
+	puts_P(PSTR("Device Attached.\r\n"));
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
+ *  stops the library USB task management process.
+ */
+void EVENT_USB_Host_DeviceUnattached(void)
+{
+	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
+ *  enumerated by the host and is now ready to be used by the application.
+ */
+void EVENT_USB_Host_DeviceEnumerationComplete(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+}
+
+/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
+{
+	USB_Disable();
+
+	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
+	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	for(;;);
+}
+
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
+ *  enumerating an attached USB device.
+ */
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
+                                            const uint8_t SubErrorCode)
+{
+	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
+	                         " -- Error Code %d\r\n"
+	                         " -- Sub Error Code %d\r\n"
+	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+}
+
diff --git a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h
index b75f8a62b..dc03cc408 100644
--- a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h
+++ b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h
@@ -1,91 +1,91 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header file for AudioOutputHost.c.

- */

-

-#ifndef _AUDIO_OUTPUT_HOST_H_

-#define _AUDIO_OUTPUT_HOST_H_

-

-	/* Includes: */

-		#include <avr/io.h>

-		#include <avr/wdt.h>

-		#include <avr/pgmspace.h>

-		#include <avr/power.h>

-		#include <avr/interrupt.h>

-		#include <stdio.h>

-

-		#include <LUFA/Version.h>

-		#include <LUFA/Drivers/Misc/TerminalCodes.h>

-		#include <LUFA/Drivers/Peripheral/Serial.h>

-		#include <LUFA/Drivers/Peripheral/ADC.h>

-		#include <LUFA/Drivers/Board/LEDs.h>

-		#include <LUFA/Drivers/Board/Buttons.h>

-		#include <LUFA/Drivers/USB/USB.h>

-

-	/* Macros: */

-		/** ADC channel number for the microphone input. */

-		#define MIC_IN_ADC_CHANNEL        2

-

-		/** ADC channel MUX mask for the microphone input. */

-		#define MIC_IN_ADC_MUX_MASK       ADC_CHANNEL2

-

-		/** Maximum audio sample value for the microphone input. */

-		#define SAMPLE_MAX_RANGE          0xFFFF

-

-		/** Maximum ADC range for the microphone input. */

-		#define ADC_MAX_RANGE             0x3FF

-

-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

-		#define LEDMASK_USB_NOTREADY      LEDS_LED1

-

-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */

-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)

-

-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */

-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)

-

-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */

-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)

-

-	/* Function Prototypes: */

-		void SetupHardware(void);

-

-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);

-		void EVENT_USB_Host_DeviceAttached(void);

-		void EVENT_USB_Host_DeviceUnattached(void);

-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,

-		                                            const uint8_t SubErrorCode);

-		void EVENT_USB_Host_DeviceEnumerationComplete(void);

-

-#endif

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for AudioOutputHost.c.
+ */
+
+#ifndef _AUDIO_OUTPUT_HOST_H_
+#define _AUDIO_OUTPUT_HOST_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/pgmspace.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdio.h>
+
+		#include <LUFA/Version.h>
+		#include <LUFA/Drivers/Misc/TerminalCodes.h>
+		#include <LUFA/Drivers/Peripheral/Serial.h>
+		#include <LUFA/Drivers/Peripheral/ADC.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		/** ADC channel number for the microphone input. */
+		#define MIC_IN_ADC_CHANNEL        2
+
+		/** ADC channel MUX mask for the microphone input. */
+		#define MIC_IN_ADC_MUX_MASK       ADC_CHANNEL2
+
+		/** Maximum audio sample value for the microphone input. */
+		#define SAMPLE_MAX_RANGE          0xFFFF
+
+		/** Maximum ADC range for the microphone input. */
+		#define ADC_MAX_RANGE             0x3FF
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
+		void EVENT_USB_Host_DeviceAttached(void);
+		void EVENT_USB_Host_DeviceUnattached(void);
+		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
+		                                            const uint8_t SubErrorCode);
+		void EVENT_USB_Host_DeviceEnumerationComplete(void);
+
+#endif
+
diff --git a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt
index 7004053c4..0faeedc5c 100644
--- a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt
+++ b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt
@@ -1,78 +1,78 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \mainpage Audio Output Host Demo

- *

- *  \section Sec_Compat Demo Compatibility:

- *

- *  The following list indicates what microcontrollers are compatible with this demo.

- *

- *  - Series 7 USB AVRs (AT90USBxxx7)

- *

- *  \section Sec_Info USB Information:

- *

- *  The following table gives a rundown of the USB utilization of this demo.

- *

- *  <table>

- *   <tr>

- *    <td><b>USB Mode:</b></td>

- *    <td>Host</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Class:</b></td>

- *    <td>Audio Class</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Subclass:</b></td>

- *    <td>Standard Audio Device</td>

- *   </tr>

- *   <tr>

- *    <td><b>Relevant Standards:</b></td>

- *    <td>USBIF Audio 1.0 Class Specification \n

- *        USBIF Audio 1.0 Class Terminal Types Specification \n

- *        USBIF Audio 1.0 Data Formats Specification</td>

- *   </tr>

- *   <tr>

- *    <td><b>Usable Speeds:</b></td>

- *    <td>Full Speed Mode</td>

- *   </tr>

- *  </table>

- *

- *  \section Sec_Description Project Description:

- *

- *  Audio Output host demonstration application. This gives a simple reference

- *  application for implementing a USB Audio host, for USB Audio devices using

- *  the USB Audio 1.0 class profile.

- *

- *  By default, the demo will produce a square wave test tone when the board

- *  button is pressed. If USE_TEST_TONE is not defined in the project makefile,

- *  incoming audio from the ADC channel 1 will be sampled and sent to the attached

- *  USB audio device instead.

- *

- *  \section Sec_Options Project Options

- *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

- *

- *  <table>

- *   <tr>

- *    <td><b>Define Name:</b></td>

- *    <td><b>Location:</b></td>

- *    <td><b>Description:</b></td>

- *   </tr>

- *   <tr>

- *    <td>USE_TEST_TONE</td>

- *    <td>Makefile LUFA_OPTS</td>

- *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed

- *        instead of sampling the board microphone.</td>

- *   </tr>

- *   <tr>

- *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>

- *    <td>Makefile LUFA_OPTS</td>

- *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>

- *   </tr>

- *  </table>

- */

-

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Audio Output Host Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  - Series 7 USB AVRs (AT90USBxxx7)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Host</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Audio Class</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Standard Audio Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Audio 1.0 Class Specification \n
+ *        USBIF Audio 1.0 Class Terminal Types Specification \n
+ *        USBIF Audio 1.0 Data Formats Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Usable Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Audio Output host demonstration application. This gives a simple reference
+ *  application for implementing a USB Audio host, for USB Audio devices using
+ *  the USB Audio 1.0 class profile.
+ *
+ *  By default, the demo will produce a square wave test tone when the board
+ *  button is pressed. If USE_TEST_TONE is not defined in the project makefile,
+ *  incoming audio from the ADC channel 1 will be sampled and sent to the attached
+ *  USB audio device instead.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>Define Name:</b></td>
+ *    <td><b>Location:</b></td>
+ *    <td><b>Description:</b></td>
+ *   </tr>
+ *   <tr>
+ *    <td>USE_TEST_TONE</td>
+ *    <td>Makefile LUFA_OPTS</td>
+ *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
+ *        instead of sampling the board microphone.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
+ *    <td>Makefile LUFA_OPTS</td>
+ *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf b/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf
index 5ad3d73d4..623373f70 100644
--- a/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf
+++ b/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf
@@ -1,1565 +1,1565 @@
-# Doxyfile 1.6.2

-

-# This file describes the settings to be used by the documentation system

-# doxygen (www.doxygen.org) for a project

-#

-# All text after a hash (#) is considered a comment and will be ignored

-# The format is:

-#       TAG = value [value, ...]

-# For lists items can also be appended using:

-#       TAG += value [value, ...]

-# Values that contain spaces should be placed between quotes (" ")

-

-#---------------------------------------------------------------------------

-# Project related configuration options

-#---------------------------------------------------------------------------

-

-# This tag specifies the encoding used for all characters in the config file

-# that follow. The default is UTF-8 which is also the encoding used for all

-# text before the first occurrence of this tag. Doxygen uses libiconv (or the

-# iconv built into libc) for the transcoding. See

-# http://www.gnu.org/software/libiconv for the list of possible encodings.

-

-DOXYFILE_ENCODING      = UTF-8

-

-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded

-# by quotes) that should identify the project.

-

-PROJECT_NAME           = "LUFA Library - Audio Output Host Demo"

-

-# The PROJECT_NUMBER tag can be used to enter a project or revision number.

-# This could be handy for archiving the generated documentation or

-# if some version control system is used.

-

-PROJECT_NUMBER         = 0.0.0

-

-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)

-# base path where the generated documentation will be put.

-# If a relative path is entered, it will be relative to the location

-# where doxygen was started. If left blank the current directory will be used.

-

-OUTPUT_DIRECTORY       = ./Documentation/

-

-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create

-# 4096 sub-directories (in 2 levels) under the output directory of each output

-# format and will distribute the generated files over these directories.

-# Enabling this option can be useful when feeding doxygen a huge amount of

-# source files, where putting all generated files in the same directory would

-# otherwise cause performance problems for the file system.

-

-CREATE_SUBDIRS         = NO

-

-# The OUTPUT_LANGUAGE tag is used to specify the language in which all

-# documentation generated by doxygen is written. Doxygen will use this

-# information to generate all constant output in the proper language.

-# The default language is English, other supported languages are:

-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,

-# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,

-# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English

-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,

-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,

-# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.

-

-OUTPUT_LANGUAGE        = English

-

-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will

-# include brief member descriptions after the members that are listed in

-# the file and class documentation (similar to JavaDoc).

-# Set to NO to disable this.

-

-BRIEF_MEMBER_DESC      = YES

-

-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend

-# the brief description of a member or function before the detailed description.

-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the

-# brief descriptions will be completely suppressed.

-

-REPEAT_BRIEF           = YES

-

-# This tag implements a quasi-intelligent brief description abbreviator

-# that is used to form the text in various listings. Each string

-# in this list, if found as the leading text of the brief description, will be

-# stripped from the text and the result after processing the whole list, is

-# used as the annotated text. Otherwise, the brief description is used as-is.

-# If left blank, the following values are used ("$name" is automatically

-# replaced with the name of the entity): "The $name class" "The $name widget"

-# "The $name file" "is" "provides" "specifies" "contains"

-# "represents" "a" "an" "the"

-

-ABBREVIATE_BRIEF       = "The $name class" \

-                         "The $name widget" \

-                         "The $name file" \

-                         is \

-                         provides \

-                         specifies \

-                         contains \

-                         represents \

-                         a \

-                         an \

-                         the

-

-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then

-# Doxygen will generate a detailed section even if there is only a brief

-# description.

-

-ALWAYS_DETAILED_SEC    = NO

-

-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all

-# inherited members of a class in the documentation of that class as if those

-# members were ordinary class members. Constructors, destructors and assignment

-# operators of the base classes will not be shown.

-

-INLINE_INHERITED_MEMB  = NO

-

-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full

-# path before files name in the file list and in the header files. If set

-# to NO the shortest path that makes the file name unique will be used.

-

-FULL_PATH_NAMES        = YES

-

-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag

-# can be used to strip a user-defined part of the path. Stripping is

-# only done if one of the specified strings matches the left-hand part of

-# the path. The tag can be used to show relative paths in the file list.

-# If left blank the directory from which doxygen is run is used as the

-# path to strip.

-

-STRIP_FROM_PATH        =

-

-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of

-# the path mentioned in the documentation of a class, which tells

-# the reader which header file to include in order to use a class.

-# If left blank only the name of the header file containing the class

-# definition is used. Otherwise one should specify the include paths that

-# are normally passed to the compiler using the -I flag.

-

-STRIP_FROM_INC_PATH    =

-

-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter

-# (but less readable) file names. This can be useful is your file systems

-# doesn't support long names like on DOS, Mac, or CD-ROM.

-

-SHORT_NAMES            = YES

-

-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen

-# will interpret the first line (until the first dot) of a JavaDoc-style

-# comment as the brief description. If set to NO, the JavaDoc

-# comments will behave just like regular Qt-style comments

-# (thus requiring an explicit @brief command for a brief description.)

-

-JAVADOC_AUTOBRIEF      = NO

-

-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will

-# interpret the first line (until the first dot) of a Qt-style

-# comment as the brief description. If set to NO, the comments

-# will behave just like regular Qt-style comments (thus requiring

-# an explicit \brief command for a brief description.)

-

-QT_AUTOBRIEF           = NO

-

-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen

-# treat a multi-line C++ special comment block (i.e. a block of //! or ///

-# comments) as a brief description. This used to be the default behaviour.

-# The new default is to treat a multi-line C++ comment block as a detailed

-# description. Set this tag to YES if you prefer the old behaviour instead.

-

-MULTILINE_CPP_IS_BRIEF = NO

-

-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented

-# member inherits the documentation from any documented member that it

-# re-implements.

-

-INHERIT_DOCS           = YES

-

-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce

-# a new page for each member. If set to NO, the documentation of a member will

-# be part of the file/class/namespace that contains it.

-

-SEPARATE_MEMBER_PAGES  = NO

-

-# The TAB_SIZE tag can be used to set the number of spaces in a tab.

-# Doxygen uses this value to replace tabs by spaces in code fragments.

-

-TAB_SIZE               = 4

-

-# This tag can be used to specify a number of aliases that acts

-# as commands in the documentation. An alias has the form "name=value".

-# For example adding "sideeffect=\par Side Effects:\n" will allow you to

-# put the command \sideeffect (or @sideeffect) in the documentation, which

-# will result in a user-defined paragraph with heading "Side Effects:".

-# You can put \n's in the value part of an alias to insert newlines.

-

-ALIASES                =

-

-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C

-# sources only. Doxygen will then generate output that is more tailored for C.

-# For instance, some of the names that are used will be different. The list

-# of all members will be omitted, etc.

-

-OPTIMIZE_OUTPUT_FOR_C  = YES

-

-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java

-# sources only. Doxygen will then generate output that is more tailored for

-# Java. For instance, namespaces will be presented as packages, qualified

-# scopes will look different, etc.

-

-OPTIMIZE_OUTPUT_JAVA   = NO

-

-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran

-# sources only. Doxygen will then generate output that is more tailored for

-# Fortran.

-

-OPTIMIZE_FOR_FORTRAN   = NO

-

-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL

-# sources. Doxygen will then generate output that is tailored for

-# VHDL.

-

-OPTIMIZE_OUTPUT_VHDL   = NO

-

-# Doxygen selects the parser to use depending on the extension of the files it parses.

-# With this tag you can assign which parser to use for a given extension.

-# Doxygen has a built-in mapping, but you can override or extend it using this tag.

-# The format is ext=language, where ext is a file extension, and language is one of

-# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,

-# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat

-# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),

-# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.

-

-EXTENSION_MAPPING      =

-

-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want

-# to include (a tag file for) the STL sources as input, then you should

-# set this tag to YES in order to let doxygen match functions declarations and

-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.

-# func(std::string) {}). This also make the inheritance and collaboration

-# diagrams that involve STL classes more complete and accurate.

-

-BUILTIN_STL_SUPPORT    = NO

-

-# If you use Microsoft's C++/CLI language, you should set this option to YES to

-# enable parsing support.

-

-CPP_CLI_SUPPORT        = NO

-

-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.

-# Doxygen will parse them like normal C++ but will assume all classes use public

-# instead of private inheritance when no explicit protection keyword is present.

-

-SIP_SUPPORT            = NO

-

-# For Microsoft's IDL there are propget and propput attributes to indicate getter

-# and setter methods for a property. Setting this option to YES (the default)

-# will make doxygen to replace the get and set methods by a property in the

-# documentation. This will only work if the methods are indeed getting or

-# setting a simple type. If this is not the case, or you want to show the

-# methods anyway, you should set this option to NO.

-

-IDL_PROPERTY_SUPPORT   = YES

-

-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC

-# tag is set to YES, then doxygen will reuse the documentation of the first

-# member in the group (if any) for the other members of the group. By default

-# all members of a group must be documented explicitly.

-

-DISTRIBUTE_GROUP_DOC   = NO

-

-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of

-# the same type (for instance a group of public functions) to be put as a

-# subgroup of that type (e.g. under the Public Functions section). Set it to

-# NO to prevent subgrouping. Alternatively, this can be done per class using

-# the \nosubgrouping command.

-

-SUBGROUPING            = YES

-

-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum

-# is documented as struct, union, or enum with the name of the typedef. So

-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct

-# with name TypeT. When disabled the typedef will appear as a member of a file,

-# namespace, or class. And the struct will be named TypeS. This can typically

-# be useful for C code in case the coding convention dictates that all compound

-# types are typedef'ed and only the typedef is referenced, never the tag name.

-

-TYPEDEF_HIDES_STRUCT   = NO

-

-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to

-# determine which symbols to keep in memory and which to flush to disk.

-# When the cache is full, less often used symbols will be written to disk.

-# For small to medium size projects (<1000 input files) the default value is

-# probably good enough. For larger projects a too small cache size can cause

-# doxygen to be busy swapping symbols to and from disk most of the time

-# causing a significant performance penality.

-# If the system has enough physical memory increasing the cache will improve the

-# performance by keeping more symbols in memory. Note that the value works on

-# a logarithmic scale so increasing the size by one will rougly double the

-# memory usage. The cache size is given by this formula:

-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,

-# corresponding to a cache size of 2^16 = 65536 symbols

-

-SYMBOL_CACHE_SIZE      = 0

-

-#---------------------------------------------------------------------------

-# Build related configuration options

-#---------------------------------------------------------------------------

-

-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in

-# documentation are documented, even if no documentation was available.

-# Private class members and static file members will be hidden unless

-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

-

-EXTRACT_ALL            = YES

-

-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class

-# will be included in the documentation.

-

-EXTRACT_PRIVATE        = YES

-

-# If the EXTRACT_STATIC tag is set to YES all static members of a file

-# will be included in the documentation.

-

-EXTRACT_STATIC         = YES

-

-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)

-# defined locally in source files will be included in the documentation.

-# If set to NO only classes defined in header files are included.

-

-EXTRACT_LOCAL_CLASSES  = YES

-

-# This flag is only useful for Objective-C code. When set to YES local

-# methods, which are defined in the implementation section but not in

-# the interface are included in the documentation.

-# If set to NO (the default) only methods in the interface are included.

-

-EXTRACT_LOCAL_METHODS  = NO

-

-# If this flag is set to YES, the members of anonymous namespaces will be

-# extracted and appear in the documentation as a namespace called

-# 'anonymous_namespace{file}', where file will be replaced with the base

-# name of the file that contains the anonymous namespace. By default

-# anonymous namespace are hidden.

-

-EXTRACT_ANON_NSPACES   = NO

-

-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all

-# undocumented members of documented classes, files or namespaces.

-# If set to NO (the default) these members will be included in the

-# various overviews, but no documentation section is generated.

-# This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_MEMBERS     = NO

-

-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all

-# undocumented classes that are normally visible in the class hierarchy.

-# If set to NO (the default) these classes will be included in the various

-# overviews. This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_CLASSES     = NO

-

-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all

-# friend (class|struct|union) declarations.

-# If set to NO (the default) these declarations will be included in the

-# documentation.

-

-HIDE_FRIEND_COMPOUNDS  = NO

-

-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any

-# documentation blocks found inside the body of a function.

-# If set to NO (the default) these blocks will be appended to the

-# function's detailed documentation block.

-

-HIDE_IN_BODY_DOCS      = NO

-

-# The INTERNAL_DOCS tag determines if documentation

-# that is typed after a \internal command is included. If the tag is set

-# to NO (the default) then the documentation will be excluded.

-# Set it to YES to include the internal documentation.

-

-INTERNAL_DOCS          = NO

-

-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate

-# file names in lower-case letters. If set to YES upper-case letters are also

-# allowed. This is useful if you have classes or files whose names only differ

-# in case and if your file system supports case sensitive file names. Windows

-# and Mac users are advised to set this option to NO.

-

-CASE_SENSE_NAMES       = NO

-

-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen

-# will show members with their full class and namespace scopes in the

-# documentation. If set to YES the scope will be hidden.

-

-HIDE_SCOPE_NAMES       = NO

-

-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen

-# will put a list of the files that are included by a file in the documentation

-# of that file.

-

-SHOW_INCLUDE_FILES     = YES

-

-# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen

-# will list include files with double quotes in the documentation

-# rather than with sharp brackets.

-

-FORCE_LOCAL_INCLUDES   = NO

-

-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]

-# is inserted in the documentation for inline members.

-

-INLINE_INFO            = YES

-

-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen

-# will sort the (detailed) documentation of file and class members

-# alphabetically by member name. If set to NO the members will appear in

-# declaration order.

-

-SORT_MEMBER_DOCS       = YES

-

-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the

-# brief documentation of file, namespace and class members alphabetically

-# by member name. If set to NO (the default) the members will appear in

-# declaration order.

-

-SORT_BRIEF_DOCS        = NO

-

-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.

-

-SORT_MEMBERS_CTORS_1ST = NO

-

-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the

-# hierarchy of group names into alphabetical order. If set to NO (the default)

-# the group names will appear in their defined order.

-

-SORT_GROUP_NAMES       = NO

-

-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be

-# sorted by fully-qualified names, including namespaces. If set to

-# NO (the default), the class list will be sorted only by class name,

-# not including the namespace part.

-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.

-# Note: This option applies only to the class list, not to the

-# alphabetical list.

-

-SORT_BY_SCOPE_NAME     = NO

-

-# The GENERATE_TODOLIST tag can be used to enable (YES) or

-# disable (NO) the todo list. This list is created by putting \todo

-# commands in the documentation.

-

-GENERATE_TODOLIST      = NO

-

-# The GENERATE_TESTLIST tag can be used to enable (YES) or

-# disable (NO) the test list. This list is created by putting \test

-# commands in the documentation.

-

-GENERATE_TESTLIST      = NO

-

-# The GENERATE_BUGLIST tag can be used to enable (YES) or

-# disable (NO) the bug list. This list is created by putting \bug

-# commands in the documentation.

-

-GENERATE_BUGLIST       = NO

-

-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or

-# disable (NO) the deprecated list. This list is created by putting

-# \deprecated commands in the documentation.

-

-GENERATE_DEPRECATEDLIST= YES

-

-# The ENABLED_SECTIONS tag can be used to enable conditional

-# documentation sections, marked by \if sectionname ... \endif.

-

-ENABLED_SECTIONS       =

-

-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines

-# the initial value of a variable or define consists of for it to appear in

-# the documentation. If the initializer consists of more lines than specified

-# here it will be hidden. Use a value of 0 to hide initializers completely.

-# The appearance of the initializer of individual variables and defines in the

-# documentation can be controlled using \showinitializer or \hideinitializer

-# command in the documentation regardless of this setting.

-

-MAX_INITIALIZER_LINES  = 30

-

-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated

-# at the bottom of the documentation of classes and structs. If set to YES the

-# list will mention the files that were used to generate the documentation.

-

-SHOW_USED_FILES        = YES

-

-# If the sources in your project are distributed over multiple directories

-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy

-# in the documentation. The default is NO.

-

-SHOW_DIRECTORIES       = YES

-

-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.

-# This will remove the Files entry from the Quick Index and from the

-# Folder Tree View (if specified). The default is YES.

-

-SHOW_FILES             = YES

-

-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the

-# Namespaces page.

-# This will remove the Namespaces entry from the Quick Index

-# and from the Folder Tree View (if specified). The default is YES.

-

-SHOW_NAMESPACES        = YES

-

-# The FILE_VERSION_FILTER tag can be used to specify a program or script that

-# doxygen should invoke to get the current version for each file (typically from

-# the version control system). Doxygen will invoke the program by executing (via

-# popen()) the command <command> <input-file>, where <command> is the value of

-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file

-# provided by doxygen. Whatever the program writes to standard output

-# is used as the file version. See the manual for examples.

-

-FILE_VERSION_FILTER    =

-

-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by

-# doxygen. The layout file controls the global structure of the generated output files

-# in an output format independent way. The create the layout file that represents

-# doxygen's defaults, run doxygen with the -l option. You can optionally specify a

-# file name after the option, if omitted DoxygenLayout.xml will be used as the name

-# of the layout file.

-

-LAYOUT_FILE            =

-

-#---------------------------------------------------------------------------

-# configuration options related to warning and progress messages

-#---------------------------------------------------------------------------

-

-# The QUIET tag can be used to turn on/off the messages that are generated

-# by doxygen. Possible values are YES and NO. If left blank NO is used.

-

-QUIET                  = YES

-

-# The WARNINGS tag can be used to turn on/off the warning messages that are

-# generated by doxygen. Possible values are YES and NO. If left blank

-# NO is used.

-

-WARNINGS               = YES

-

-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings

-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will

-# automatically be disabled.

-

-WARN_IF_UNDOCUMENTED   = YES

-

-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for

-# potential errors in the documentation, such as not documenting some

-# parameters in a documented function, or documenting parameters that

-# don't exist or using markup commands wrongly.

-

-WARN_IF_DOC_ERROR      = YES

-

-# This WARN_NO_PARAMDOC option can be abled to get warnings for

-# functions that are documented, but have no documentation for their parameters

-# or return value. If set to NO (the default) doxygen will only warn about

-# wrong or incomplete parameter documentation, but not about the absence of

-# documentation.

-

-WARN_NO_PARAMDOC       = YES

-

-# The WARN_FORMAT tag determines the format of the warning messages that

-# doxygen can produce. The string should contain the $file, $line, and $text

-# tags, which will be replaced by the file and line number from which the

-# warning originated and the warning text. Optionally the format may contain

-# $version, which will be replaced by the version of the file (if it could

-# be obtained via FILE_VERSION_FILTER)

-

-WARN_FORMAT            = "$file:$line: $text"

-

-# The WARN_LOGFILE tag can be used to specify a file to which warning

-# and error messages should be written. If left blank the output is written

-# to stderr.

-

-WARN_LOGFILE           =

-

-#---------------------------------------------------------------------------

-# configuration options related to the input files

-#---------------------------------------------------------------------------

-

-# The INPUT tag can be used to specify the files and/or directories that contain

-# documented source files. You may enter file names like "myfile.cpp" or

-# directories like "/usr/src/myproject". Separate the files or directories

-# with spaces.

-

-INPUT                  = ./

-

-# This tag can be used to specify the character encoding of the source files

-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is

-# also the default input encoding. Doxygen uses libiconv (or the iconv built

-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for

-# the list of possible encodings.

-

-INPUT_ENCODING         = UTF-8

-

-# If the value of the INPUT tag contains directories, you can use the

-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank the following patterns are tested:

-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx

-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90

-

-FILE_PATTERNS          = *.h \

-                         *.c \

-                         *.txt

-

-# The RECURSIVE tag can be used to turn specify whether or not subdirectories

-# should be searched for input files as well. Possible values are YES and NO.

-# If left blank NO is used.

-

-RECURSIVE              = YES

-

-# The EXCLUDE tag can be used to specify files and/or directories that should

-# excluded from the INPUT source files. This way you can easily exclude a

-# subdirectory from a directory tree whose root is specified with the INPUT tag.

-

-EXCLUDE                = Documentation/

-

-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or

-# directories that are symbolic links (a Unix filesystem feature) are excluded

-# from the input.

-

-EXCLUDE_SYMLINKS       = NO

-

-# If the value of the INPUT tag contains directories, you can use the

-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude

-# certain files from those directories. Note that the wildcards are matched

-# against the file with absolute path, so to exclude all test directories

-# for example use the pattern */test/*

-

-EXCLUDE_PATTERNS       = 

-

-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names

-# (namespaces, classes, functions, etc.) that should be excluded from the

-# output. The symbol name can be a fully qualified name, a word, or if the

-# wildcard * is used, a substring. Examples: ANamespace, AClass,

-# AClass::ANamespace, ANamespace::*Test

-

-EXCLUDE_SYMBOLS        = __* \

-                         INCLUDE_FROM_*

-

-# The EXAMPLE_PATH tag can be used to specify one or more files or

-# directories that contain example code fragments that are included (see

-# the \include command).

-

-EXAMPLE_PATH           =

-

-# If the value of the EXAMPLE_PATH tag contains directories, you can use the

-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank all files are included.

-

-EXAMPLE_PATTERNS       = *

-

-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be

-# searched for input files to be used with the \include or \dontinclude

-# commands irrespective of the value of the RECURSIVE tag.

-# Possible values are YES and NO. If left blank NO is used.

-

-EXAMPLE_RECURSIVE      = NO

-

-# The IMAGE_PATH tag can be used to specify one or more files or

-# directories that contain image that are included in the documentation (see

-# the \image command).

-

-IMAGE_PATH             =

-

-# The INPUT_FILTER tag can be used to specify a program that doxygen should

-# invoke to filter for each input file. Doxygen will invoke the filter program

-# by executing (via popen()) the command <filter> <input-file>, where <filter>

-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an

-# input file. Doxygen will then use the output that the filter program writes

-# to standard output.

-# If FILTER_PATTERNS is specified, this tag will be

-# ignored.

-

-INPUT_FILTER           =

-

-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern

-# basis.

-# Doxygen will compare the file name with each pattern and apply the

-# filter if there is a match.

-# The filters are a list of the form:

-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further

-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER

-# is applied to all files.

-

-FILTER_PATTERNS        =

-

-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using

-# INPUT_FILTER) will be used to filter the input files when producing source

-# files to browse (i.e. when SOURCE_BROWSER is set to YES).

-

-FILTER_SOURCE_FILES    = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to source browsing

-#---------------------------------------------------------------------------

-

-# If the SOURCE_BROWSER tag is set to YES then a list of source files will

-# be generated. Documented entities will be cross-referenced with these sources.

-# Note: To get rid of all source code in the generated output, make sure also

-# VERBATIM_HEADERS is set to NO.

-

-SOURCE_BROWSER         = NO

-

-# Setting the INLINE_SOURCES tag to YES will include the body

-# of functions and classes directly in the documentation.

-

-INLINE_SOURCES         = NO

-

-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct

-# doxygen to hide any special comment blocks from generated source code

-# fragments. Normal C and C++ comments will always remain visible.

-

-STRIP_CODE_COMMENTS    = YES

-

-# If the REFERENCED_BY_RELATION tag is set to YES

-# then for each documented function all documented

-# functions referencing it will be listed.

-

-REFERENCED_BY_RELATION = NO

-

-# If the REFERENCES_RELATION tag is set to YES

-# then for each documented function all documented entities

-# called/used by that function will be listed.

-

-REFERENCES_RELATION    = NO

-

-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)

-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from

-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will

-# link to the source code.

-# Otherwise they will link to the documentation.

-

-REFERENCES_LINK_SOURCE = NO

-

-# If the USE_HTAGS tag is set to YES then the references to source code

-# will point to the HTML generated by the htags(1) tool instead of doxygen

-# built-in source browser. The htags tool is part of GNU's global source

-# tagging system (see http://www.gnu.org/software/global/global.html). You

-# will need version 4.8.6 or higher.

-

-USE_HTAGS              = NO

-

-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen

-# will generate a verbatim copy of the header file for each class for

-# which an include is specified. Set to NO to disable this.

-

-VERBATIM_HEADERS       = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the alphabetical class index

-#---------------------------------------------------------------------------

-

-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index

-# of all compounds will be generated. Enable this if the project

-# contains a lot of classes, structs, unions or interfaces.

-

-ALPHABETICAL_INDEX     = YES

-

-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then

-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns

-# in which this list will be split (can be a number in the range [1..20])

-

-COLS_IN_ALPHA_INDEX    = 5

-

-# In case all classes in a project start with a common prefix, all

-# classes will be put under the same header in the alphabetical index.

-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that

-# should be ignored while generating the index headers.

-

-IGNORE_PREFIX          =

-

-#---------------------------------------------------------------------------

-# configuration options related to the HTML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will

-# generate HTML output.

-

-GENERATE_HTML          = YES

-

-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `html' will be used as the default path.

-

-HTML_OUTPUT            = html

-

-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for

-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank

-# doxygen will generate files with .html extension.

-

-HTML_FILE_EXTENSION    = .html

-

-# The HTML_HEADER tag can be used to specify a personal HTML header for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard header.

-

-HTML_HEADER            =

-

-# The HTML_FOOTER tag can be used to specify a personal HTML footer for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard footer.

-

-HTML_FOOTER            =

-

-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading

-# style sheet that is used by each HTML page. It can be used to

-# fine-tune the look of the HTML output. If the tag is left blank doxygen

-# will generate a default style sheet. Note that doxygen will try to copy

-# the style sheet file to the HTML output directory, so don't put your own

-# stylesheet in the HTML output directory as well, or it will be erased!

-

-HTML_STYLESHEET        =

-

-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML

-# page will contain the date and time when the page was generated. Setting

-# this to NO can help when comparing the output of multiple runs.

-

-HTML_TIMESTAMP         = NO

-

-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,

-# files or namespaces will be aligned in HTML using tables. If set to

-# NO a bullet list will be used.

-

-HTML_ALIGN_MEMBERS     = YES

-

-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML

-# documentation will contain sections that can be hidden and shown after the

-# page has loaded. For this to work a browser that supports

-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox

-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).

-

-HTML_DYNAMIC_SECTIONS  = YES

-

-# If the GENERATE_DOCSET tag is set to YES, additional index files

-# will be generated that can be used as input for Apple's Xcode 3

-# integrated development environment, introduced with OSX 10.5 (Leopard).

-# To create a documentation set, doxygen will generate a Makefile in the

-# HTML output directory. Running make will produce the docset in that

-# directory and running "make install" will install the docset in

-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find

-# it at startup.

-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.

-

-GENERATE_DOCSET        = NO

-

-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the

-# feed. A documentation feed provides an umbrella under which multiple

-# documentation sets from a single provider (such as a company or product suite)

-# can be grouped.

-

-DOCSET_FEEDNAME        = "Doxygen generated docs"

-

-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that

-# should uniquely identify the documentation set bundle. This should be a

-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen

-# will append .docset to the name.

-

-DOCSET_BUNDLE_ID       = org.doxygen.Project

-

-# If the GENERATE_HTMLHELP tag is set to YES, additional index files

-# will be generated that can be used as input for tools like the

-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)

-# of the generated HTML documentation.

-

-GENERATE_HTMLHELP      = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can

-# be used to specify the file name of the resulting .chm file. You

-# can add a path in front of the file if the result should not be

-# written to the html output directory.

-

-CHM_FILE               =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can

-# be used to specify the location (absolute path including file name) of

-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run

-# the HTML help compiler on the generated index.hhp.

-

-HHC_LOCATION           =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag

-# controls if a separate .chi index file is generated (YES) or that

-# it should be included in the master .chm file (NO).

-

-GENERATE_CHI           = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING

-# is used to encode HtmlHelp index (hhk), content (hhc) and project file

-# content.

-

-CHM_INDEX_ENCODING     =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag

-# controls whether a binary table of contents is generated (YES) or a

-# normal table of contents (NO) in the .chm file.

-

-BINARY_TOC             = NO

-

-# The TOC_EXPAND flag can be set to YES to add extra items for group members

-# to the contents of the HTML help documentation and to the tree view.

-

-TOC_EXPAND             = YES

-

-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER

-# are set, an additional index file will be generated that can be used as input for

-# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated

-# HTML documentation.

-

-GENERATE_QHP           = NO

-

-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can

-# be used to specify the file name of the resulting .qch file.

-# The path specified is relative to the HTML output folder.

-

-QCH_FILE               =

-

-# The QHP_NAMESPACE tag specifies the namespace to use when generating

-# Qt Help Project output. For more information please see

-# http://doc.trolltech.com/qthelpproject.html#namespace

-

-QHP_NAMESPACE          = org.doxygen.Project

-

-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating

-# Qt Help Project output. For more information please see

-# http://doc.trolltech.com/qthelpproject.html#virtual-folders

-

-QHP_VIRTUAL_FOLDER     = doc

-

-# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.

-# For more information please see

-# http://doc.trolltech.com/qthelpproject.html#custom-filters

-

-QHP_CUST_FILTER_NAME   =

-

-# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see

-# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.

-

-QHP_CUST_FILTER_ATTRS  =

-

-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's

-# filter section matches.

-# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.

-

-QHP_SECT_FILTER_ATTRS  =

-

-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can

-# be used to specify the location of Qt's qhelpgenerator.

-# If non-empty doxygen will try to run qhelpgenerator on the generated

-# .qhp file.

-

-QHG_LOCATION           =

-

-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files

-#  will be generated, which together with the HTML files, form an Eclipse help

-#  plugin. To install this plugin and make it available under the help contents

-# menu in Eclipse, the contents of the directory containing the HTML and XML

-# files needs to be copied into the plugins directory of eclipse. The name of

-# the directory within the plugins directory should be the same as

-# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears.

-

-GENERATE_ECLIPSEHELP   = NO

-

-# A unique identifier for the eclipse help plugin. When installing the plugin

-# the directory name containing the HTML and XML files should also have

-# this name.

-

-ECLIPSE_DOC_ID         = org.doxygen.Project

-

-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at

-# top of each HTML page. The value NO (the default) enables the index and

-# the value YES disables it.

-

-DISABLE_INDEX          = NO

-

-# This tag can be used to set the number of enum values (range [1..20])

-# that doxygen will group on one line in the generated HTML documentation.

-

-ENUM_VALUES_PER_LINE   = 1

-

-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index

-# structure should be generated to display hierarchical information.

-# If the tag value is set to YES, a side panel will be generated

-# containing a tree-like index structure (just like the one that

-# is generated for HTML Help). For this to work a browser that supports

-# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).

-# Windows users are probably better off using the HTML help feature.

-

-GENERATE_TREEVIEW      = YES

-

-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,

-# and Class Hierarchy pages using a tree view instead of an ordered list.

-

-USE_INLINE_TREES       = NO

-

-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be

-# used to set the initial width (in pixels) of the frame in which the tree

-# is shown.

-

-TREEVIEW_WIDTH         = 250

-

-# Use this tag to change the font size of Latex formulas included

-# as images in the HTML documentation. The default is 10. Note that

-# when you change the font size after a successful doxygen run you need

-# to manually remove any form_*.png images from the HTML output directory

-# to force them to be regenerated.

-

-FORMULA_FONTSIZE       = 10

-

-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript

-# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should

-# typically be disabled. For large projects the javascript based search engine

-# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.

-

-SEARCHENGINE           = NO

-

-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index

-# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup

-# and does not have live searching capabilities.

-

-SERVER_BASED_SEARCH    = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the LaTeX output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will

-# generate Latex output.

-

-GENERATE_LATEX         = NO

-

-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `latex' will be used as the default path.

-

-LATEX_OUTPUT           = latex

-

-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be

-# invoked. If left blank `latex' will be used as the default command name.

-# Note that when enabling USE_PDFLATEX this option is only used for

-# generating bitmaps for formulas in the HTML output, but not in the

-# Makefile that is written to the output directory.

-

-LATEX_CMD_NAME         = latex

-

-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to

-# generate index for LaTeX. If left blank `makeindex' will be used as the

-# default command name.

-

-MAKEINDEX_CMD_NAME     = makeindex

-

-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact

-# LaTeX documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_LATEX          = NO

-

-# The PAPER_TYPE tag can be used to set the paper type that is used

-# by the printer. Possible values are: a4, a4wide, letter, legal and

-# executive. If left blank a4wide will be used.

-

-PAPER_TYPE             = a4wide

-

-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX

-# packages that should be included in the LaTeX output.

-

-EXTRA_PACKAGES         =

-

-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for

-# the generated latex document. The header should contain everything until

-# the first chapter. If it is left blank doxygen will generate a

-# standard header. Notice: only use this tag if you know what you are doing!

-

-LATEX_HEADER           =

-

-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated

-# is prepared for conversion to pdf (using ps2pdf). The pdf file will

-# contain links (just like the HTML output) instead of page references

-# This makes the output suitable for online browsing using a pdf viewer.

-

-PDF_HYPERLINKS         = YES

-

-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of

-# plain latex in the generated Makefile. Set this option to YES to get a

-# higher quality PDF documentation.

-

-USE_PDFLATEX           = YES

-

-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.

-# command to the generated LaTeX files. This will instruct LaTeX to keep

-# running if errors occur, instead of asking the user for help.

-# This option is also used when generating formulas in HTML.

-

-LATEX_BATCHMODE        = NO

-

-# If LATEX_HIDE_INDICES is set to YES then doxygen will not

-# include the index chapters (such as File Index, Compound Index, etc.)

-# in the output.

-

-LATEX_HIDE_INDICES     = NO

-

-# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.

-

-LATEX_SOURCE_CODE      = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the RTF output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output

-# The RTF output is optimized for Word 97 and may not look very pretty with

-# other RTF readers or editors.

-

-GENERATE_RTF           = NO

-

-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `rtf' will be used as the default path.

-

-RTF_OUTPUT             = rtf

-

-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact

-# RTF documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_RTF            = NO

-

-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated

-# will contain hyperlink fields. The RTF file will

-# contain links (just like the HTML output) instead of page references.

-# This makes the output suitable for online browsing using WORD or other

-# programs which support those fields.

-# Note: wordpad (write) and others do not support links.

-

-RTF_HYPERLINKS         = NO

-

-# Load stylesheet definitions from file. Syntax is similar to doxygen's

-# config file, i.e. a series of assignments. You only have to provide

-# replacements, missing definitions are set to their default value.

-

-RTF_STYLESHEET_FILE    =

-

-# Set optional variables used in the generation of an rtf document.

-# Syntax is similar to doxygen's config file.

-

-RTF_EXTENSIONS_FILE    =

-

-#---------------------------------------------------------------------------

-# configuration options related to the man page output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will

-# generate man pages

-

-GENERATE_MAN           = NO

-

-# The MAN_OUTPUT tag is used to specify where the man pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `man' will be used as the default path.

-

-MAN_OUTPUT             = man

-

-# The MAN_EXTENSION tag determines the extension that is added to

-# the generated man pages (default is the subroutine's section .3)

-

-MAN_EXTENSION          = .3

-

-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,

-# then it will generate one additional man file for each entity

-# documented in the real man page(s). These additional files

-# only source the real man page, but without them the man command

-# would be unable to find the correct page. The default is NO.

-

-MAN_LINKS              = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the XML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_XML tag is set to YES Doxygen will

-# generate an XML file that captures the structure of

-# the code including all documentation.

-

-GENERATE_XML           = NO

-

-# The XML_OUTPUT tag is used to specify where the XML pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `xml' will be used as the default path.

-

-XML_OUTPUT             = xml

-

-# The XML_SCHEMA tag can be used to specify an XML schema,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_SCHEMA             =

-

-# The XML_DTD tag can be used to specify an XML DTD,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_DTD                =

-

-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will

-# dump the program listings (including syntax highlighting

-# and cross-referencing information) to the XML output. Note that

-# enabling this will significantly increase the size of the XML output.

-

-XML_PROGRAMLISTING     = YES

-

-#---------------------------------------------------------------------------

-# configuration options for the AutoGen Definitions output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will

-# generate an AutoGen Definitions (see autogen.sf.net) file

-# that captures the structure of the code including all

-# documentation. Note that this feature is still experimental

-# and incomplete at the moment.

-

-GENERATE_AUTOGEN_DEF   = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the Perl module output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_PERLMOD tag is set to YES Doxygen will

-# generate a Perl module file that captures the structure of

-# the code including all documentation. Note that this

-# feature is still experimental and incomplete at the

-# moment.

-

-GENERATE_PERLMOD       = NO

-

-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate

-# the necessary Makefile rules, Perl scripts and LaTeX code to be able

-# to generate PDF and DVI output from the Perl module output.

-

-PERLMOD_LATEX          = NO

-

-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be

-# nicely formatted so it can be parsed by a human reader.

-# This is useful

-# if you want to understand what is going on.

-# On the other hand, if this

-# tag is set to NO the size of the Perl module output will be much smaller

-# and Perl will parse it just the same.

-

-PERLMOD_PRETTY         = YES

-

-# The names of the make variables in the generated doxyrules.make file

-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.

-# This is useful so different doxyrules.make files included by the same

-# Makefile don't overwrite each other's variables.

-

-PERLMOD_MAKEVAR_PREFIX =

-

-#---------------------------------------------------------------------------

-# Configuration options related to the preprocessor

-#---------------------------------------------------------------------------

-

-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will

-# evaluate all C-preprocessor directives found in the sources and include

-# files.

-

-ENABLE_PREPROCESSING   = YES

-

-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro

-# names in the source code. If set to NO (the default) only conditional

-# compilation will be performed. Macro expansion can be done in a controlled

-# way by setting EXPAND_ONLY_PREDEF to YES.

-

-MACRO_EXPANSION        = YES

-

-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES

-# then the macro expansion is limited to the macros specified with the

-# PREDEFINED and EXPAND_AS_DEFINED tags.

-

-EXPAND_ONLY_PREDEF     = YES

-

-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files

-# in the INCLUDE_PATH (see below) will be search if a #include is found.

-

-SEARCH_INCLUDES        = YES

-

-# The INCLUDE_PATH tag can be used to specify one or more directories that

-# contain include files that are not input files but should be processed by

-# the preprocessor.

-

-INCLUDE_PATH           =

-

-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard

-# patterns (like *.h and *.hpp) to filter out the header-files in the

-# directories. If left blank, the patterns specified with FILE_PATTERNS will

-# be used.

-

-INCLUDE_FILE_PATTERNS  =

-

-# The PREDEFINED tag can be used to specify one or more macro names that

-# are defined before the preprocessor is started (similar to the -D option of

-# gcc). The argument of the tag is a list of macros of the form: name

-# or name=definition (no spaces). If the definition and the = are

-# omitted =1 is assumed. To prevent a macro definition from being

-# undefined via #undef or recursively expanded use the := operator

-# instead of the = operator.

-

-PREDEFINED             = __DOXYGEN__ \

-                         PROGMEM

-

-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then

-# this tag can be used to specify a list of macro names that should be expanded.

-# The macro definition that is found in the sources will be used.

-# Use the PREDEFINED tag if you want to use a different macro definition.

-

-EXPAND_AS_DEFINED      = 

-

-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then

-# doxygen's preprocessor will remove all function-like macros that are alone

-# on a line, have an all uppercase name, and do not end with a semicolon. Such

-# function macros are typically used for boiler-plate code, and will confuse

-# the parser if not removed.

-

-SKIP_FUNCTION_MACROS   = YES

-

-#---------------------------------------------------------------------------

-# Configuration::additions related to external references

-#---------------------------------------------------------------------------

-

-# The TAGFILES option can be used to specify one or more tagfiles.

-# Optionally an initial location of the external documentation

-# can be added for each tagfile. The format of a tag file without

-# this location is as follows:

-#

-# TAGFILES = file1 file2 ...

-# Adding location for the tag files is done as follows:

-#

-# TAGFILES = file1=loc1 "file2 = loc2" ...

-# where "loc1" and "loc2" can be relative or absolute paths or

-# URLs. If a location is present for each tag, the installdox tool

-# does not have to be run to correct the links.

-# Note that each tag file must have a unique name

-# (where the name does NOT include the path)

-# If a tag file is not located in the directory in which doxygen

-# is run, you must also specify the path to the tagfile here.

-

-TAGFILES               =

-

-# When a file name is specified after GENERATE_TAGFILE, doxygen will create

-# a tag file that is based on the input files it reads.

-

-GENERATE_TAGFILE       =

-

-# If the ALLEXTERNALS tag is set to YES all external classes will be listed

-# in the class index. If set to NO only the inherited external classes

-# will be listed.

-

-ALLEXTERNALS           = NO

-

-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed

-# in the modules index. If set to NO, only the current project's groups will

-# be listed.

-

-EXTERNAL_GROUPS        = YES

-

-# The PERL_PATH should be the absolute path and name of the perl script

-# interpreter (i.e. the result of `which perl').

-

-PERL_PATH              = /usr/bin/perl

-

-#---------------------------------------------------------------------------

-# Configuration options related to the dot tool

-#---------------------------------------------------------------------------

-

-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will

-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base

-# or super classes. Setting the tag to NO turns the diagrams off. Note that

-# this option is superseded by the HAVE_DOT option below. This is only a

-# fallback. It is recommended to install and use dot, since it yields more

-# powerful graphs.

-

-CLASS_DIAGRAMS         = NO

-

-# You can define message sequence charts within doxygen comments using the \msc

-# command. Doxygen will then run the mscgen tool (see

-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the

-# documentation. The MSCGEN_PATH tag allows you to specify the directory where

-# the mscgen tool resides. If left empty the tool is assumed to be found in the

-# default search path.

-

-MSCGEN_PATH            =

-

-# If set to YES, the inheritance and collaboration graphs will hide

-# inheritance and usage relations if the target is undocumented

-# or is not a class.

-

-HIDE_UNDOC_RELATIONS   = YES

-

-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is

-# available from the path. This tool is part of Graphviz, a graph visualization

-# toolkit from AT&T and Lucent Bell Labs. The other options in this section

-# have no effect if this option is set to NO (the default)

-

-HAVE_DOT               = NO

-

-# By default doxygen will write a font called FreeSans.ttf to the output

-# directory and reference it in all dot files that doxygen generates. This

-# font does not include all possible unicode characters however, so when you need

-# these (or just want a differently looking font) you can specify the font name

-# using DOT_FONTNAME. You need need to make sure dot is able to find the font,

-# which can be done by putting it in a standard location or by setting the

-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory

-# containing the font.

-

-DOT_FONTNAME           = FreeSans

-

-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.

-# The default size is 10pt.

-

-DOT_FONTSIZE           = 10

-

-# By default doxygen will tell dot to use the output directory to look for the

-# FreeSans.ttf font (which doxygen will put there itself). If you specify a

-# different font using DOT_FONTNAME you can set the path where dot

-# can find it using this tag.

-

-DOT_FONTPATH           =

-

-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect inheritance relations. Setting this tag to YES will force the

-# the CLASS_DIAGRAMS tag to NO.

-

-CLASS_GRAPH            = NO

-

-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect implementation dependencies (inheritance, containment, and

-# class references variables) of the class with other documented classes.

-

-COLLABORATION_GRAPH    = NO

-

-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for groups, showing the direct groups dependencies

-

-GROUP_GRAPHS           = NO

-

-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and

-# collaboration diagrams in a style similar to the OMG's Unified Modeling

-# Language.

-

-UML_LOOK               = NO

-

-# If set to YES, the inheritance and collaboration graphs will show the

-# relations between templates and their instances.

-

-TEMPLATE_RELATIONS     = NO

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT

-# tags are set to YES then doxygen will generate a graph for each documented

-# file showing the direct and indirect include dependencies of the file with

-# other documented files.

-

-INCLUDE_GRAPH          = NO

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and

-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each

-# documented header file showing the documented files that directly or

-# indirectly include this file.

-

-INCLUDED_BY_GRAPH      = NO

-

-# If the CALL_GRAPH and HAVE_DOT options are set to YES then

-# doxygen will generate a call dependency graph for every global function

-# or class method. Note that enabling this option will significantly increase

-# the time of a run. So in most cases it will be better to enable call graphs

-# for selected functions only using the \callgraph command.

-

-CALL_GRAPH             = NO

-

-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then

-# doxygen will generate a caller dependency graph for every global function

-# or class method. Note that enabling this option will significantly increase

-# the time of a run. So in most cases it will be better to enable caller

-# graphs for selected functions only using the \callergraph command.

-

-CALLER_GRAPH           = NO

-

-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen

-# will graphical hierarchy of all classes instead of a textual one.

-

-GRAPHICAL_HIERARCHY    = NO

-

-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES

-# then doxygen will show the dependencies a directory has on other directories

-# in a graphical way. The dependency relations are determined by the #include

-# relations between the files in the directories.

-

-DIRECTORY_GRAPH        = NO

-

-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images

-# generated by dot. Possible values are png, jpg, or gif

-# If left blank png will be used.

-

-DOT_IMAGE_FORMAT       = png

-

-# The tag DOT_PATH can be used to specify the path where the dot tool can be

-# found. If left blank, it is assumed the dot tool can be found in the path.

-

-DOT_PATH               =

-

-# The DOTFILE_DIRS tag can be used to specify one or more directories that

-# contain dot files that are included in the documentation (see the

-# \dotfile command).

-

-DOTFILE_DIRS           =

-

-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of

-# nodes that will be shown in the graph. If the number of nodes in a graph

-# becomes larger than this value, doxygen will truncate the graph, which is

-# visualized by representing a node as a red box. Note that doxygen if the

-# number of direct children of the root node in a graph is already larger than

-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note

-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.

-

-DOT_GRAPH_MAX_NODES    = 15

-

-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the

-# graphs generated by dot. A depth value of 3 means that only nodes reachable

-# from the root by following a path via at most 3 edges will be shown. Nodes

-# that lay further from the root node will be omitted. Note that setting this

-# option to 1 or 2 may greatly reduce the computation time needed for large

-# code bases. Also note that the size of a graph can be further restricted by

-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.

-

-MAX_DOT_GRAPH_DEPTH    = 2

-

-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent

-# background. This is disabled by default, because dot on Windows does not

-# seem to support this out of the box. Warning: Depending on the platform used,

-# enabling this option may lead to badly anti-aliased labels on the edges of

-# a graph (i.e. they become hard to read).

-

-DOT_TRANSPARENT        = YES

-

-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output

-# files in one run (i.e. multiple -o and -T options on the command line). This

-# makes dot run faster, but since only newer versions of dot (>1.8.10)

-# support this, this feature is disabled by default.

-

-DOT_MULTI_TARGETS      = NO

-

-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will

-# generate a legend page explaining the meaning of the various boxes and

-# arrows in the dot generated graphs.

-

-GENERATE_LEGEND        = YES

-

-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will

-# remove the intermediate dot files that are used to generate

-# the various graphs.

-

-DOT_CLEANUP            = YES

+# Doxyfile 1.6.2
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "LUFA Library - Audio Output Host Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         = 0.0.0
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it parses.
+# With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this tag.
+# The format is ext=language, where ext is a file extension, and language is one of
+# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
+# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
+# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
+# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
+# doxygen. The layout file controls the global structure of the generated output files
+# in an output format independent way. The create the layout file that represents
+# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
+# file name after the option, if omitted DoxygenLayout.xml will be used as the name
+# of the layout file.
+
+LAYOUT_FILE            =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       = 
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = YES
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        =
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
+# are set, an additional index file will be generated that can be used as input for
+# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
+# HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
+# For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+#  plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = YES
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      = 
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = NO
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/Demos/Host/ClassDriver/AudioOutputHost/makefile b/Demos/Host/ClassDriver/AudioOutputHost/makefile
index 76bf2cada..c723cb327 100644
--- a/Demos/Host/ClassDriver/AudioOutputHost/makefile
+++ b/Demos/Host/ClassDriver/AudioOutputHost/makefile
@@ -1,717 +1,717 @@
-# Hey Emacs, this is a -*- makefile -*-

-#----------------------------------------------------------------------------

-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.

-#  >> Modified for use with the LUFA project. <<

-#

-# Released to the Public Domain

-#

-# Additional material for this makefile was written by:

-# Peter Fleury

-# Tim Henigan

-# Colin O'Flynn

-# Reiner Patommel

-# Markus Pfaff

-# Sander Pool

-# Frederik Rouleau

-# Carlos Lamas

-# Dean Camera

-# Opendous Inc.

-# Denver Gingerich

-#

-#----------------------------------------------------------------------------

-# On command line:

-#

-# make all = Make software.

-#

-# make clean = Clean out built project files.

-#

-# make coff = Convert ELF to AVR COFF.

-#

-# make extcoff = Convert ELF to AVR Extended COFF.

-#

-# make program = Download the hex file to the device, using avrdude.

-#                Please customize the avrdude settings below first!

-#

-# make dfu = Download the hex file to the device, using dfu-programmer (must

-#            have dfu-programmer installed).

-#

-# make flip = Download the hex file to the device, using Atmel FLIP (must

-#             have Atmel FLIP installed).

-#

-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

-#               (must have dfu-programmer installed).

-#

-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

-#                (must have Atmel FLIP installed).

-#

-# make doxygen = Generate DoxyGen documentation for the project (must have

-#                DoxyGen installed)

-#

-# make debug = Start either simulavr or avarice as specified for debugging,

-#              with avr-gdb or avr-insight as the front end for debugging.

-#

-# make filename.s = Just compile filename.c into the assembler code only.

-#

-# make filename.i = Create a preprocessed source file for use in submitting

-#                   bug reports to the GCC project.

-#

-# To rebuild project do "make clean" then "make all".

-#----------------------------------------------------------------------------

-

-

-# MCU name

-MCU = at90usb1287

-

-

-# Target architecture (see library "Board Types" documentation).

-ARCH = AVR8

-

-

-# Target board (see library "Board Types" documentation, NONE for projects not requiring

-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called

-# "Board" inside the application directory.

-BOARD = USBKEY

-

-

-# Processor frequency.

-#     This will define a symbol, F_CPU, in all source code files equal to the

-#     processor frequency in Hz. You can then use this symbol in your source code to

-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

-#     automatically to create a 32-bit value in your source code.

-#

-#     This will be an integer division of F_USB below, as it is sourced by

-#     F_USB after it has run through any CPU prescalers. Note that this value

-#     does not *change* the processor frequency - it should merely be updated to

-#     reflect the processor speed set externally so that the code can use accurate

-#     software delays.

-F_CPU = 8000000

-

-

-# Input clock frequency.

-#     This will define a symbol, F_USB, in all source code files equal to the

-#     input clock frequency (before any prescaling is performed) in Hz. This value may

-#     differ from F_CPU if prescaling is used on the latter, and is required as the

-#     raw input clock is fed directly to the PLL sections of the AVR for high speed

-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'

-#     at the end, this will be done automatically to create a 32-bit value in your

-#     source code.

-#

-#     If no clock division is performed on the input clock inside the AVR (via the

-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_USB = $(F_CPU)

-

-

-# Output format. (can be srec, ihex, binary)

-FORMAT = ihex

-

-

-# Target file name (without extension).

-TARGET = AudioOutputHost

-

-

-# Object files directory

-#     To put object files in current directory, use a dot (.), do NOT make

-#     this an empty or blank macro!

-OBJDIR = .

-

-

-# Path to the LUFA library

-LUFA_PATH = ../../../..

-

-

-# LUFA library compile-time options and predefined tokens

-LUFA_OPTS  = -D USB_HOST_ONLY

-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"

-

-LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL

-LUFA_OPTS += -D USE_TEST_TONE

-

-

-# Create the LUFA source path variables by including the LUFA root makefile

-include $(LUFA_PATH)/LUFA/makefile

-

-

-# List C source files here. (C dependencies are automatically generated.)

-SRC = $(TARGET).c                                                 \

-	  $(LUFA_SRC_USB)                                             \

-	  $(LUFA_SRC_USBCLASS)                                        \

-	  $(LUFA_SRC_SERIAL)

-

-

-# List C++ source files here. (C dependencies are automatically generated.)

-CPPSRC =

-

-

-# List Assembler source files here.

-#     Make them always end in a capital .S.  Files ending in a lowercase .s

-#     will not be considered source files but generated files (assembler

-#     output from the compiler), and will be deleted upon "make clean"!

-#     Even though the DOS/Win* filesystem matches both .s and .S the same,

-#     it will preserve the spelling of the filenames, and gcc itself does

-#     care about how the name is spelled on its command-line.

-ASRC =

-

-

-# Optimization level, can be [0, 1, 2, 3, s].

-#     0 = turn off optimization. s = optimize for size.

-#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)

-OPT = s

-

-

-# Debugging format.

-#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.

-#     AVR Studio 4.10 requires dwarf-2.

-#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.

-DEBUG = dwarf-2

-

-

-# List any extra directories to look for include files here.

-#     Each directory must be seperated by a space.

-#     Use forward slashes for directory separators.

-#     For a directory that has spaces, enclose it in quotes.

-EXTRAINCDIRS = $(LUFA_PATH)/

-

-

-# Compiler flag to set the C Standard level.

-#     c89   = "ANSI" C

-#     gnu89 = c89 plus GCC extensions

-#     c99   = ISO C99 standard (not yet fully implemented)

-#     gnu99 = c99 plus GCC extensions

-CSTANDARD = -std=c99

-

-

-# Place -D or -U options here for C sources

-CDEFS  = -DF_CPU=$(F_CPU)UL

-CDEFS += -DF_USB=$(F_USB)UL

-CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)

-CDEFS += $(LUFA_OPTS)

-

-

-# Place -D or -U options here for ASM sources

-ADEFS  = -DF_CPU=$(F_CPU)

-ADEFS += -DF_USB=$(F_USB)UL

-ADEFS += -DBOARD=BOARD_$(BOARD)

-ADEFS += $(LUFA_OPTS)

-

-# Place -D or -U options here for C++ sources

-CPPDEFS  = -DF_CPU=$(F_CPU)UL

-CPPDEFS += -DF_USB=$(F_USB)UL

-CPPDEFS += -DBOARD=BOARD_$(BOARD)

-CPPDEFS += $(LUFA_OPTS)

-#CPPDEFS += -D__STDC_LIMIT_MACROS

-#CPPDEFS += -D__STDC_CONSTANT_MACROS

-

-

-

-#---------------- Compiler Options C ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CFLAGS = -g$(DEBUG)

-CFLAGS += $(CDEFS)

-CFLAGS += -O$(OPT)

-CFLAGS += -funsigned-char

-CFLAGS += -funsigned-bitfields

-CFLAGS += -ffunction-sections

-CFLAGS += -fno-inline-small-functions

-CFLAGS += -fpack-struct

-CFLAGS += -fshort-enums

-CFLAGS += -fno-strict-aliasing

-CFLAGS += -Wall

-CFLAGS += -Wstrict-prototypes

-#CFLAGS += -mshort-calls

-#CFLAGS += -fno-unit-at-a-time

-#CFLAGS += -Wundef

-#CFLAGS += -Wunreachable-code

-#CFLAGS += -Wsign-compare

-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-CFLAGS += $(CSTANDARD)

-

-

-#---------------- Compiler Options C++ ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CPPFLAGS = -g$(DEBUG)

-CPPFLAGS += $(CPPDEFS)

-CPPFLAGS += -O$(OPT)

-CPPFLAGS += -funsigned-char

-CPPFLAGS += -funsigned-bitfields

-CPPFLAGS += -fpack-struct

-CPPFLAGS += -fshort-enums

-CPPFLAGS += -fno-exceptions

-CPPFLAGS += -Wall

-CPPFLAGS += -Wundef

-#CPPFLAGS += -mshort-calls

-#CPPFLAGS += -fno-unit-at-a-time

-#CPPFLAGS += -Wstrict-prototypes

-#CPPFLAGS += -Wunreachable-code

-#CPPFLAGS += -Wsign-compare

-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-#CPPFLAGS += $(CSTANDARD)

-

-

-#---------------- Assembler Options ----------------

-#  -Wa,...:   tell GCC to pass this to the assembler.

-#  -adhlns:   create listing

-#  -gstabs:   have the assembler create line number information; note that

-#             for use in COFF files, additional information about filenames

-#             and function names needs to be present in the assembler source

-#             files -- see avr-libc docs [FIXME: not yet described there]

-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex

-#       dump that will be displayed for a given single line of source input.

-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

-

-

-#---------------- Library Options ----------------

-# Minimalistic printf version

-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min

-

-# Floating point printf version (requires MATH_LIB = -lm below)

-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt

-

-# If this is left blank, then it will use the Standard printf version.

-PRINTF_LIB =

-#PRINTF_LIB = $(PRINTF_LIB_MIN)

-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)

-

-

-# Minimalistic scanf version

-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min

-

-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)

-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt

-

-# If this is left blank, then it will use the Standard scanf version.

-SCANF_LIB =

-#SCANF_LIB = $(SCANF_LIB_MIN)

-#SCANF_LIB = $(SCANF_LIB_FLOAT)

-

-

-MATH_LIB = -lm

-

-

-# List any extra directories to look for libraries here.

-#     Each directory must be seperated by a space.

-#     Use forward slashes for directory separators.

-#     For a directory that has spaces, enclose it in quotes.

-EXTRALIBDIRS =

-

-

-

-#---------------- External Memory Options ----------------

-

-# 64 KB of external RAM, starting after internal RAM (ATmega128!),

-# used for variables (.data/.bss) and heap (malloc()).

-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff

-

-# 64 KB of external RAM, starting after internal RAM (ATmega128!),

-# only used for heap (malloc()).

-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff

-

-EXTMEMOPTS =

-

-

-

-#---------------- Linker Options ----------------

-#  -Wl,...:     tell GCC to pass this to linker.

-#    -Map:      create map file

-#    --cref:    add cross reference to  map file

-LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref

-LDFLAGS += -Wl,--relax

-LDFLAGS += -Wl,--gc-sections

-LDFLAGS += $(EXTMEMOPTS)

-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))

-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)

-#LDFLAGS += -T linker_script.x

-

-

-

-#---------------- Programming Options (avrdude) ----------------

-

-# Programming hardware

-# Type: avrdude -c ?

-# to get a full listing.

-#

-AVRDUDE_PROGRAMMER = jtagmkII

-

-# com1 = serial port. Use lpt1 to connect to parallel port.

-AVRDUDE_PORT = usb

-

-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex

-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep

-

-

-# Uncomment the following if you want avrdude's erase cycle counter.

-# Note that this counter needs to be initialized first using -Yn,

-# see avrdude manual.

-#AVRDUDE_ERASE_COUNTER = -y

-

-# Uncomment the following if you do /not/ wish a verification to be

-# performed after programming the device.

-#AVRDUDE_NO_VERIFY = -V

-

-# Increase verbosity level.  Please use this when submitting bug

-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>

-# to submit bug reports.

-#AVRDUDE_VERBOSE = -v -v

-

-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)

-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)

-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)

-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)

-

-

-

-#---------------- Debugging Options ----------------

-

-# For simulavr only - target MCU frequency.

-DEBUG_MFREQ = $(F_CPU)

-

-# Set the DEBUG_UI to either gdb or insight.

-# DEBUG_UI = gdb

-DEBUG_UI = insight

-

-# Set the debugging back-end to either avarice, simulavr.

-DEBUG_BACKEND = avarice

-#DEBUG_BACKEND = simulavr

-

-# GDB Init Filename.

-GDBINIT_FILE = __avr_gdbinit

-

-# When using avarice settings for the JTAG

-JTAG_DEV = /dev/com1

-

-# Debugging port used to communicate between GDB / avarice / simulavr.

-DEBUG_PORT = 4242

-

-# Debugging host used to communicate between GDB / avarice / simulavr, normally

-#     just set to localhost unless doing some sort of crazy debugging when

-#     avarice is running on a different computer.

-DEBUG_HOST = localhost

-

-

-

-#============================================================================

-

-

-# Define programs and commands.

-SHELL = sh

-CC = avr-gcc

-OBJCOPY = avr-objcopy

-OBJDUMP = avr-objdump

-SIZE = avr-size

-AR = avr-ar rcs

-NM = avr-nm

-AVRDUDE = avrdude

-REMOVE = rm -f

-REMOVEDIR = rm -rf

-COPY = cp

-WINSHELL = cmd

-

-

-# Define Messages

-# English

-MSG_ERRORS_NONE = Errors: none

-MSG_BEGIN = -------- begin --------

-MSG_END = --------  end  --------

-MSG_SIZE_BEFORE = Size before:

-MSG_SIZE_AFTER = Size after:

-MSG_COFF = Converting to AVR COFF:

-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:

-MSG_FLASH = Creating load file for Flash:

-MSG_EEPROM = Creating load file for EEPROM:

-MSG_EXTENDED_LISTING = Creating Extended Listing:

-MSG_SYMBOL_TABLE = Creating Symbol Table:

-MSG_LINKING = Linking:

-MSG_COMPILING = Compiling C:

-MSG_COMPILING_CPP = Compiling C++:

-MSG_ASSEMBLING = Assembling:

-MSG_CLEANING = Cleaning project:

-MSG_CREATING_LIBRARY = Creating library:

-

-

-

-

-# Define all object files.

-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

-

-# Define all listing files.

-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

-

-

-# Compiler flags to generate dependency files.

-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d

-

-

-# Combine all necessary flags and optional flags.

-# Add target processor to flags.

-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)

-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)

-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)

-

-

-

-

-

-# Default target.

-all: begin gccversion sizebefore build sizeafter end

-

-# Change the build target to build a HEX file or a library.

-build: elf hex eep lss sym

-#build: lib

-

-

-elf: $(TARGET).elf

-hex: $(TARGET).hex

-eep: $(TARGET).eep

-lss: $(TARGET).lss

-sym: $(TARGET).sym

-LIBNAME=lib$(TARGET).a

-lib: $(LIBNAME)

-

-

-

-# Eye candy.

-# AVR Studio 3.x does not check make's exit code but relies on

-# the following magic strings to be generated by the compile job.

-begin:

-	@echo

-	@echo $(MSG_BEGIN)

-

-end:

-	@echo $(MSG_END)

-	@echo

-

-

-# Display size of file.

-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex

-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf

-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )

-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )

-

-

-sizebefore:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-sizeafter:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-

-

-# Display compiler version information.

-gccversion :

-	@$(CC) --version

-

-

-# Program the device.

-program: $(TARGET).hex $(TARGET).eep

-	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)

-

-flip: $(TARGET).hex

-	batchisp -hardware usb -device $(MCU) -operation erase f

-	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-

-dfu: $(TARGET).hex

-	dfu-programmer $(MCU) erase

-	dfu-programmer $(MCU) flash $(TARGET).hex

-	dfu-programmer $(MCU) reset

-

-flip-ee: $(TARGET).hex $(TARGET).eep

-	$(COPY) $(TARGET).eep $(TARGET)eep.hex

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-	$(REMOVE) $(TARGET)eep.hex

-

-dfu-ee: $(TARGET).hex $(TARGET).eep

-	dfu-programmer $(MCU) eeprom-flash $(TARGET).eep

-	dfu-programmer $(MCU) reset

-

-

-# Generate avr-gdb config/init file which does the following:

-#     define the reset signal, load the target file, connect to target, and set

-#     a breakpoint at main().

-gdb-config:

-	@$(REMOVE) $(GDBINIT_FILE)

-	@echo define reset >> $(GDBINIT_FILE)

-	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)

-	@echo end >> $(GDBINIT_FILE)

-	@echo file $(TARGET).elf >> $(GDBINIT_FILE)

-	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)

-ifeq ($(DEBUG_BACKEND),simulavr)

-	@echo load  >> $(GDBINIT_FILE)

-endif

-	@echo break main >> $(GDBINIT_FILE)

-

-debug: gdb-config $(TARGET).elf

-ifeq ($(DEBUG_BACKEND), avarice)

-	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.

-	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \

-	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)

-	@$(WINSHELL) /c pause

-

-else

-	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \

-	$(DEBUG_MFREQ) --port $(DEBUG_PORT)

-endif

-	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)

-

-

-

-

-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.

-COFFCONVERT = $(OBJCOPY) --debugging

-COFFCONVERT += --change-section-address .data-0x800000

-COFFCONVERT += --change-section-address .bss-0x800000

-COFFCONVERT += --change-section-address .noinit-0x800000

-COFFCONVERT += --change-section-address .eeprom-0x810000

-

-

-

-coff: $(TARGET).elf

-	@echo

-	@echo $(MSG_COFF) $(TARGET).cof

-	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof

-

-

-extcoff: $(TARGET).elf

-	@echo

-	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof

-	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof

-

-

-

-# Create final output files (.hex, .eep) from ELF output file.

-%.hex: %.elf

-	@echo

-	@echo $(MSG_FLASH) $@

-	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@

-

-%.eep: %.elf

-	@echo

-	@echo $(MSG_EEPROM) $@

-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \

-	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0

-

-# Create extended listing file from ELF output file.

-%.lss: %.elf

-	@echo

-	@echo $(MSG_EXTENDED_LISTING) $@

-	$(OBJDUMP) -h -S -z $< > $@

-

-# Create a symbol table from ELF output file.

-%.sym: %.elf

-	@echo

-	@echo $(MSG_SYMBOL_TABLE) $@

-	$(NM) -n $< > $@

-

-

-

-# Create library from object files.

-.SECONDARY : $(TARGET).a

-.PRECIOUS : $(OBJ)

-%.a: $(OBJ)

-	@echo

-	@echo $(MSG_CREATING_LIBRARY) $@

-	$(AR) $@ $(OBJ)

-

-

-# Link: create ELF output file from object files.

-.SECONDARY : $(TARGET).elf

-.PRECIOUS : $(OBJ)

-%.elf: $(OBJ)

-	@echo

-	@echo $(MSG_LINKING) $@

-	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)

-

-

-# Compile: create object files from C source files.

-$(OBJDIR)/%.o : %.c

-	@echo

-	@echo $(MSG_COMPILING) $<

-	$(CC) -c $(ALL_CFLAGS) $< -o $@

-

-

-# Compile: create object files from C++ source files.

-$(OBJDIR)/%.o : %.cpp

-	@echo

-	@echo $(MSG_COMPILING_CPP) $<

-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@

-

-

-# Compile: create assembler files from C source files.

-%.s : %.c

-	$(CC) -S $(ALL_CFLAGS) $< -o $@

-

-

-# Compile: create assembler files from C++ source files.

-%.s : %.cpp

-	$(CC) -S $(ALL_CPPFLAGS) $< -o $@

-

-

-# Assemble: create object files from assembler source files.

-$(OBJDIR)/%.o : %.S

-	@echo

-	@echo $(MSG_ASSEMBLING) $<

-	$(CC) -c $(ALL_ASFLAGS) $< -o $@

-

-

-# Create preprocessed source for use in sending a bug report.

-%.i : %.c

-	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@

-

-

-# Target: clean project.

-clean: begin clean_list end

-

-clean_list :

-	@echo

-	@echo $(MSG_CLEANING)

-	$(REMOVE) $(TARGET).hex

-	$(REMOVE) $(TARGET).eep

-	$(REMOVE) $(TARGET).cof

-	$(REMOVE) $(TARGET).elf

-	$(REMOVE) $(TARGET).map

-	$(REMOVE) $(TARGET).sym

-	$(REMOVE) $(TARGET).lss

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

-	$(REMOVE) $(SRC:.c=.s)

-	$(REMOVE) $(SRC:.c=.d)

-	$(REMOVE) $(SRC:.c=.i)

-	$(REMOVEDIR) .dep

-

-doxygen:

-	@echo Generating Project Documentation...

-	@doxygen Doxygen.conf

-	@echo Documentation Generation Complete.

-

-clean_doxygen:

-	rm -rf Documentation

-

-# Create object files directory

-$(shell mkdir $(OBJDIR) 2>/dev/null)

-

-

-# Include the dependency files.

--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)

-

-

-# Listing of phony targets.

-.PHONY : all begin finish end sizebefore sizeafter gccversion \

-build elf hex eep lss sym coff extcoff doxygen clean          \

-clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \

-debug gdb-config

-

+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+#  >> Modified for use with the LUFA project. <<
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+# Dean Camera
+# Opendous Inc.
+# Denver Gingerich
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+#                Please customize the avrdude settings below first!
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make doxygen = Generate DoxyGen documentation for the project (must have
+#                DoxyGen installed)
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+
+# MCU name
+MCU = at90usb1287
+
+
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
+# "Board" inside the application directory.
+BOARD = USBKEY
+
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 8000000
+
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+
+# Target file name (without extension).
+TARGET = AudioOutputHost
+
+
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+OBJDIR = .
+
+
+# Path to the LUFA library
+LUFA_PATH = ../../../..
+
+
+# LUFA library compile-time options and predefined tokens
+LUFA_OPTS  = -D USB_HOST_ONLY
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+
+LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL
+LUFA_OPTS += -D USE_TEST_TONE
+
+
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(TARGET).c                                                 \
+	  $(LUFA_SRC_USB)                                             \
+	  $(LUFA_SRC_USBCLASS)                                        \
+	  $(LUFA_SRC_SERIAL)
+
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+
+# List Assembler source files here.
+#     Make them always end in a capital .S.  Files ending in a lowercase .s
+#     will not be considered source files but generated files (assembler
+#     output from the compiler), and will be deleted upon "make clean"!
+#     Even though the DOS/Win* filesystem matches both .s and .S the same,
+#     it will preserve the spelling of the filenames, and gcc itself does
+#     care about how the name is spelled on its command-line.
+ASRC =
+
+
+# Optimization level, can be [0, 1, 2, 3, s].
+#     0 = turn off optimization. s = optimize for size.
+#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = s
+
+
+# Debugging format.
+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+#     AVR Studio 4.10 requires dwarf-2.
+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+
+# List any extra directories to look for include files here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = $(LUFA_PATH)/
+
+
+# Compiler flag to set the C Standard level.
+#     c89   = "ANSI" C
+#     gnu89 = c89 plus GCC extensions
+#     c99   = ISO C99 standard (not yet fully implemented)
+#     gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=c99
+
+
+# Place -D or -U options here for C sources
+CDEFS  = -DF_CPU=$(F_CPU)UL
+CDEFS += -DF_USB=$(F_USB)UL
+CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
+CDEFS += $(LUFA_OPTS)
+
+
+# Place -D or -U options here for ASM sources
+ADEFS  = -DF_CPU=$(F_CPU)
+ADEFS += -DF_USB=$(F_USB)UL
+ADEFS += -DBOARD=BOARD_$(BOARD)
+ADEFS += $(LUFA_OPTS)
+
+# Place -D or -U options here for C++ sources
+CPPDEFS  = -DF_CPU=$(F_CPU)UL
+CPPDEFS += -DF_USB=$(F_USB)UL
+CPPDEFS += -DBOARD=BOARD_$(BOARD)
+CPPDEFS += $(LUFA_OPTS)
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+
+
+#---------------- Compiler Options C ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
+CFLAGS += -fno-inline-small-functions
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+CFLAGS += -fno-strict-aliasing
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+
+
+#---------------- Compiler Options C++ ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CPPFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+
+
+#---------------- Assembler Options ----------------
+#  -Wa,...:   tell GCC to pass this to the assembler.
+#  -adhlns:   create listing
+#  -gstabs:   have the assembler create line number information; note that
+#             for use in COFF files, additional information about filenames
+#             and function names needs to be present in the assembler source
+#             files -- see avr-libc docs [FIXME: not yet described there]
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
+#       dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB =
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB =
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+
+MATH_LIB = -lm
+
+
+# List any extra directories to look for libraries here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
+#---------------- Linker Options ----------------
+#  -Wl,...:     tell GCC to pass this to linker.
+#    -Map:      create map file
+#    --cref:    add cross reference to  map file
+LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = jtagmkII
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = usb
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+#     just set to localhost unless doing some sort of crazy debugging when
+#     avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = --------  end  --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+
+
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+
+
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex eep lss sym
+#build: lib
+
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@echo
+	@echo $(MSG_BEGIN)
+
+end:
+	@echo $(MSG_END)
+	@echo
+
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
+MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
+FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
+
+
+sizebefore:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+sizeafter:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+
+
+# Display compiler version information.
+gccversion :
+	@$(CC) --version
+
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+flip: $(TARGET).hex
+	batchisp -hardware usb -device $(MCU) -operation erase f
+	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(TARGET).hex
+	dfu-programmer $(MCU) erase
+	dfu-programmer $(MCU) flash $(TARGET).hex
+	dfu-programmer $(MCU) reset
+
+flip-ee: $(TARGET).hex $(TARGET).eep
+	$(COPY) $(TARGET).eep $(TARGET)eep.hex
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+	$(REMOVE) $(TARGET)eep.hex
+
+dfu-ee: $(TARGET).hex $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
+	dfu-programmer $(MCU) reset
+
+
+# Generate avr-gdb config/init file which does the following:
+#     define the reset signal, load the target file, connect to target, and set
+#     a breakpoint at main().
+gdb-config:
+	@$(REMOVE) $(GDBINIT_FILE)
+	@echo define reset >> $(GDBINIT_FILE)
+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+	@echo end >> $(GDBINIT_FILE)
+	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+	@echo load  >> $(GDBINIT_FILE)
+endif
+	@echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+	@$(WINSHELL) /c pause
+
+else
+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+
+
+coff: $(TARGET).elf
+	@echo
+	@echo $(MSG_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+	@echo
+	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
+
+%.eep: %.elf
+	@echo
+	@echo $(MSG_EEPROM) $@
+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+	@echo
+	@echo $(MSG_EXTENDED_LISTING) $@
+	$(OBJDUMP) -h -S -z $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+	@echo
+	@echo $(MSG_SYMBOL_TABLE) $@
+	$(NM) -n $< > $@
+
+
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+	@echo
+	@echo $(MSG_CREATING_LIBRARY) $@
+	$(AR) $@ $(OBJ)
+
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+	@echo
+	@echo $(MSG_LINKING) $@
+	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+	@echo
+	@echo $(MSG_COMPILING) $<
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+	@echo
+	@echo $(MSG_COMPILING_CPP) $<
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+	$(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+	@echo
+	@echo $(MSG_ASSEMBLING) $<
+	$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+	@echo
+	@echo $(MSG_CLEANING)
+	$(REMOVE) $(TARGET).hex
+	$(REMOVE) $(TARGET).eep
+	$(REMOVE) $(TARGET).cof
+	$(REMOVE) $(TARGET).elf
+	$(REMOVE) $(TARGET).map
+	$(REMOVE) $(TARGET).sym
+	$(REMOVE) $(TARGET).lss
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+	$(REMOVE) $(SRC:.c=.s)
+	$(REMOVE) $(SRC:.c=.d)
+	$(REMOVE) $(SRC:.c=.i)
+	$(REMOVEDIR) .dep
+
+doxygen:
+	@echo Generating Project Documentation...
+	@doxygen Doxygen.conf
+	@echo Documentation Generation Complete.
+
+clean_doxygen:
+	rm -rf Documentation
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff doxygen clean          \
+clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
+debug gdb-config
+
diff --git a/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c b/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c
index 3cb2f530d..69202f7cd 100644
--- a/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c
+++ b/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c
@@ -1,267 +1,267 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Main source file for the AndroidAccessoryHost demo. This file contains the main tasks

- *  of the demo and is responsible for the initial application hardware configuration.

- */

-

-#include "AndroidAccessoryHost.h"

-

-/** Main program entry point. This routine configures the hardware required by the application, then

- *  enters a loop to run the application tasks in sequence.

- */

-int main(void)

-{

-	SetupHardware();

-

-	puts_P(PSTR(ESC_FG_CYAN "Android Accessory Host Demo running.\r\n" ESC_FG_WHITE));

-

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-	sei();

-

-	for (;;)

-	{

-		Android_Host_Task();

-		USB_USBTask();

-	}

-}

-

-/** Configures the board hardware and chip peripherals for the demo's functionality. */

-void SetupHardware(void)

-{

-	/* Disable watchdog if enabled by bootloader/fuses */

-	MCUSR &= ~(1 << WDRF);

-	wdt_disable();

-

-	/* Disable clock division */

-	clock_prescale_set(clock_div_1);

-

-	/* Hardware Initialization */

-	Serial_Init(9600, false);

-	LEDs_Init();

-	USB_Init();

-

-	/* Create a stdio stream for the serial port for stdin and stdout */

-	Serial_CreateStream(NULL);

-}

-

-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and

- *  starts the library USB task to begin the enumeration and USB management process.

- */

-void EVENT_USB_Host_DeviceAttached(void)

-{

-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));

-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);

-}

-

-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and

- *  stops the library USB task management process.

- */

-void EVENT_USB_Host_DeviceUnattached(void)

-{

-	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-}

-

-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully

- *  enumerated by the host and is now ready to be used by the application.

- */

-void EVENT_USB_Host_DeviceEnumerationComplete(void)

-{

-	LEDs_SetAllLEDs(LEDMASK_USB_READY);

-}

-

-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */

-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)

-{

-	USB_Disable();

-

-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"

-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-	for(;;);

-}

-

-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while

- *  enumerating an attached USB device.

- */

-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,

-                                            const uint8_t SubErrorCode)

-{

-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"

-	                         " -- Error Code %d\r\n"

-	                         " -- Sub Error Code %d\r\n"

-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-}

-

-/** Task to set the configuration of the attached device after it has been enumerated. */

-void Android_Host_Task(void)

-{

-	uint8_t ErrorCode;

-

-	switch (USB_HostState)

-	{

-		case HOST_STATE_Addressed:

-			puts_P(PSTR("Getting Device Data.\r\n"));

-

-			/* Get and process the configuration descriptor data */

-			ErrorCode = ProcessDeviceDescriptor();

-			

-			/* Save whether the Android device needs to be mode-switched later on */

-			bool RequiresModeSwitch = (ErrorCode == NonAccessoryModeAndroidDevice);

-			

-			/* Error out if the device is not an Android device or an error occurred */

-			if ((ErrorCode != AccessoryModeAndroidDevice) && !(RequiresModeSwitch))

-			{

-				if (ErrorCode == DevControlError)

-				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));

-				else

-				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));

-

-				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error via status LEDs */

-				LEDs_SetAllLEDs(LEDS_LED1);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-

-			printf_P(PSTR("Android Device Detected - %sAccessory mode.\r\n"), (RequiresModeSwitch ? "Non-" : ""));

-

-			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */

-			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)

-			{

-				printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"

-				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error via status LEDs */

-				LEDs_SetAllLEDs(LEDS_LED1);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-			

-			/* Check if a valid Android device was attached, but it is not current in Accessory mode */

-			if (RequiresModeSwitch)

-			{

-				USB_ControlRequest = (USB_Request_Header_t)

-				{

-					.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_VENDOR | REQREC_DEVICE),

-					.bRequest      = ANDROID_Req_StartAccessoryMode,

-					.wValue        = 0,

-					.wIndex        = 0,

-					.wLength       = 0,

-				};

-

-				/* Send the control request for the Android device to switch to accessory mode */

-				Pipe_SelectPipe(PIPE_CONTROLPIPE);

-				USB_Host_SendControlRequest(NULL);

-			

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-

-			puts_P(PSTR("Getting Config Data.\r\n"));

-

-			/* Get and process the configuration descriptor data */

-			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)

-			{

-				if (ErrorCode == ControlError)

-				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));

-				else

-				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));

-

-				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error via status LEDs */

-				LEDs_SetAllLEDs(LEDS_LED1);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-

-			puts_P(PSTR("Accessory Mode Android Enumerated.\r\n"));

-

-			USB_HostState = HOST_STATE_Configured;

-			break;

-		case HOST_STATE_Configured:

-			/* Select the data IN pipe */

-			Pipe_SelectPipe(ANDROID_DATA_IN_PIPE);

-			Pipe_Unfreeze();

-

-			/* Check to see if a packet has been received */

-			if (Pipe_IsINReceived())

-			{

-				/* Re-freeze IN pipe after the packet has been received */

-				Pipe_Freeze();

-

-				/* Check if data is in the pipe */

-				if (Pipe_IsReadWriteAllowed())

-				{

-					uint8_t NextReceivedByte = Pipe_BytesInPipe();

-					uint8_t LEDMask          = LEDS_NO_LEDS;

-

-					if (NextReceivedByte & 0x01)

-						LEDMask |= LEDS_LED1;

-

-					if (NextReceivedByte & 0x02)

-						LEDMask |= LEDS_LED2;

-

-					if (NextReceivedByte & 0x04)

-						LEDMask |= LEDS_LED3;

-

-					if (NextReceivedByte & 0x08)

-						LEDMask |= LEDS_LED4;

-

-					LEDs_SetAllLEDs(LEDMask);

-				}

-				else

-				{

-					/* Clear the pipe after all data in the packet has been read, ready for the next packet */

-					Pipe_ClearIN();

-				}

-			}

-

-			/* Re-freeze IN pipe after use */

-			Pipe_Freeze();

-			break;			

-	}

-}

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the AndroidAccessoryHost demo. This file contains the main tasks
+ *  of the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "AndroidAccessoryHost.h"
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	puts_P(PSTR(ESC_FG_CYAN "Android Accessory Host Demo running.\r\n" ESC_FG_WHITE));
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	sei();
+
+	for (;;)
+	{
+		Android_Host_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+
+	/* Hardware Initialization */
+	Serial_Init(9600, false);
+	LEDs_Init();
+	USB_Init();
+
+	/* Create a stdio stream for the serial port for stdin and stdout */
+	Serial_CreateStream(NULL);
+}
+
+/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Host_DeviceAttached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
+ *  stops the library USB task management process.
+ */
+void EVENT_USB_Host_DeviceUnattached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
+ *  enumerated by the host and is now ready to be used by the application.
+ */
+void EVENT_USB_Host_DeviceEnumerationComplete(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+}
+
+/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
+{
+	USB_Disable();
+
+	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
+	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	for(;;);
+}
+
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
+ *  enumerating an attached USB device.
+ */
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
+                                            const uint8_t SubErrorCode)
+{
+	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
+	                         " -- Error Code %d\r\n"
+	                         " -- Sub Error Code %d\r\n"
+	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+}
+
+/** Task to set the configuration of the attached device after it has been enumerated. */
+void Android_Host_Task(void)
+{
+	uint8_t ErrorCode;
+
+	switch (USB_HostState)
+	{
+		case HOST_STATE_Addressed:
+			puts_P(PSTR("Getting Device Data.\r\n"));
+
+			/* Get and process the configuration descriptor data */
+			ErrorCode = ProcessDeviceDescriptor();
+			
+			/* Save whether the Android device needs to be mode-switched later on */
+			bool RequiresModeSwitch = (ErrorCode == NonAccessoryModeAndroidDevice);
+			
+			/* Error out if the device is not an Android device or an error occurred */
+			if ((ErrorCode != AccessoryModeAndroidDevice) && !(RequiresModeSwitch))
+			{
+				if (ErrorCode == DevControlError)
+				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));
+				else
+				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
+
+				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDS_LED1);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			printf_P(PSTR("Android Device Detected - %sAccessory mode.\r\n"), (RequiresModeSwitch ? "Non-" : ""));
+
+			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
+			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
+			{
+				printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
+				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDS_LED1);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+			
+			/* Check if a valid Android device was attached, but it is not current in Accessory mode */
+			if (RequiresModeSwitch)
+			{
+				USB_ControlRequest = (USB_Request_Header_t)
+				{
+					.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_VENDOR | REQREC_DEVICE),
+					.bRequest      = ANDROID_Req_StartAccessoryMode,
+					.wValue        = 0,
+					.wIndex        = 0,
+					.wLength       = 0,
+				};
+
+				/* Send the control request for the Android device to switch to accessory mode */
+				Pipe_SelectPipe(PIPE_CONTROLPIPE);
+				USB_Host_SendControlRequest(NULL);
+			
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			puts_P(PSTR("Getting Config Data.\r\n"));
+
+			/* Get and process the configuration descriptor data */
+			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
+			{
+				if (ErrorCode == ControlError)
+				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
+				else
+				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
+
+				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDS_LED1);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			puts_P(PSTR("Accessory Mode Android Enumerated.\r\n"));
+
+			USB_HostState = HOST_STATE_Configured;
+			break;
+		case HOST_STATE_Configured:
+			/* Select the data IN pipe */
+			Pipe_SelectPipe(ANDROID_DATA_IN_PIPE);
+			Pipe_Unfreeze();
+
+			/* Check to see if a packet has been received */
+			if (Pipe_IsINReceived())
+			{
+				/* Re-freeze IN pipe after the packet has been received */
+				Pipe_Freeze();
+
+				/* Check if data is in the pipe */
+				if (Pipe_IsReadWriteAllowed())
+				{
+					uint8_t NextReceivedByte = Pipe_BytesInPipe();
+					uint8_t LEDMask          = LEDS_NO_LEDS;
+
+					if (NextReceivedByte & 0x01)
+						LEDMask |= LEDS_LED1;
+
+					if (NextReceivedByte & 0x02)
+						LEDMask |= LEDS_LED2;
+
+					if (NextReceivedByte & 0x04)
+						LEDMask |= LEDS_LED3;
+
+					if (NextReceivedByte & 0x08)
+						LEDMask |= LEDS_LED4;
+
+					LEDs_SetAllLEDs(LEDMask);
+				}
+				else
+				{
+					/* Clear the pipe after all data in the packet has been read, ready for the next packet */
+					Pipe_ClearIN();
+				}
+			}
+
+			/* Re-freeze IN pipe after use */
+			Pipe_Freeze();
+			break;			
+	}
+}
+
diff --git a/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.h b/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.h
index 58717c5ad..aea0b4447 100644
--- a/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.h
+++ b/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.h
@@ -1,95 +1,95 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header file for AndroidAccessoryHost.c.

- */

-

-#ifndef _ANDROID_ACCESSORY_HOST_H_

-#define _ANDROID_ACCESSORY_HOST_H_

-

-	/* Includes: */

-		#include <avr/io.h>

-		#include <avr/wdt.h>

-		#include <avr/pgmspace.h>

-		#include <avr/power.h>

-		#include <avr/interrupt.h>

-		#include <stdio.h>

-

-		#include "DeviceDescriptor.h"

-		#include "ConfigDescriptor.h"

-

-		#include <LUFA/Version.h>

-		#include <LUFA/Drivers/Misc/TerminalCodes.h>

-		#include <LUFA/Drivers/USB/USB.h>

-		#include <LUFA/Drivers/Peripheral/Serial.h>

-		#include <LUFA/Drivers/Board/LEDs.h>

-

-	/* Macros: */

-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

-		#define LEDMASK_USB_NOTREADY      LEDS_LED1

-

-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */

-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)

-

-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */

-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)

-

-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */

-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)

-

-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */

-		#define LEDMASK_USB_BUSY          LEDS_LED2

-

-	/* Enums: */

-		enum Android_Requests_t

-		{

-			ANDROID_Req_GetAccessoryProtocol    = 51,

-			ANDROID_Req_GetString               = 52,

-			ANDROID_Req_StartAccessoryMode      = 53,

-		};

-

-	/* Task Definitions: */

-		void Android_Host_Task(void);

-

-	/* Event Handlers: */

-		void EVENT_USB_Host_DeviceAttached(void);

-		void EVENT_USB_Host_DeviceUnattached(void);

-		void EVENT_USB_Host_DeviceEnumerationComplete(void);

-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);

-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,

-		                                            const uint8_t SubErrorCode);

-

-	/* Function Prototypes: */

-		void SetupHardware(void);

-

-#endif

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for AndroidAccessoryHost.c.
+ */
+
+#ifndef _ANDROID_ACCESSORY_HOST_H_
+#define _ANDROID_ACCESSORY_HOST_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/pgmspace.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdio.h>
+
+		#include "DeviceDescriptor.h"
+		#include "ConfigDescriptor.h"
+
+		#include <LUFA/Version.h>
+		#include <LUFA/Drivers/Misc/TerminalCodes.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Peripheral/Serial.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+		#define LEDMASK_USB_BUSY          LEDS_LED2
+
+	/* Enums: */
+		enum Android_Requests_t
+		{
+			ANDROID_Req_GetAccessoryProtocol    = 51,
+			ANDROID_Req_GetString               = 52,
+			ANDROID_Req_StartAccessoryMode      = 53,
+		};
+
+	/* Task Definitions: */
+		void Android_Host_Task(void);
+
+	/* Event Handlers: */
+		void EVENT_USB_Host_DeviceAttached(void);
+		void EVENT_USB_Host_DeviceUnattached(void);
+		void EVENT_USB_Host_DeviceEnumerationComplete(void);
+		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
+		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
+		                                            const uint8_t SubErrorCode);
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+
+#endif
+
diff --git a/Demos/Host/Incomplete/AndroidAccessoryHost/ConfigDescriptor.c b/Demos/Host/Incomplete/AndroidAccessoryHost/ConfigDescriptor.c
index 72a1be0a9..664e065ad 100644
--- a/Demos/Host/Incomplete/AndroidAccessoryHost/ConfigDescriptor.c
+++ b/Demos/Host/Incomplete/AndroidAccessoryHost/ConfigDescriptor.c
@@ -1,138 +1,138 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations

- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures

- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.

- */

-

-#include "ConfigDescriptor.h"

-

-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This

- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate

- *  with compatible devices.

- *

- *  This routine searches for the first interface containing bulk IN and OUT data endpoints.

- *

- *  \return An error code from the \ref AndroidHost_GetConfigDescriptorDataCodes_t enum.

- */

-uint8_t ProcessConfigurationDescriptor(void)

-{

-	uint8_t  ConfigDescriptorData[512];

-	void*    CurrConfigLocation = ConfigDescriptorData;

-	uint16_t CurrConfigBytesRem;

-

-	USB_Descriptor_Endpoint_t* DataINEndpoint  = NULL;

-	USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;

-

-	/* Retrieve the entire configuration descriptor into the allocated buffer */

-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))

-	{

-		case HOST_GETCONFIG_Successful:

-			break;

-		case HOST_GETCONFIG_InvalidData:

-			return InvalidConfigDataReturned;

-		case HOST_GETCONFIG_BuffOverflow:

-			return DescriptorTooLarge;

-		default:

-			return DevControlError;

-	}

-

-	/* The Android Accessory Mode specification mandates that the accessory communications endpoints

-	   be in the first interface descriptor (interface 0) */

-	USB_GetNextDescriptorOfType(&CurrConfigBytesRem, &CurrConfigLocation, DTYPE_Interface);

-

-	/* Ensure that an interface was found, and the end of the descriptor was not reached */

-	if (!(CurrConfigBytesRem))

-	  return NoCompatibleInterfaceFound;

-

-	while (!(DataINEndpoint) || !(DataOUTEndpoint))

-	{

-		/* Get the next Still Image interface's data endpoint descriptor */

-		if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,

-		                              DCOMP_NextInterfaceBulkEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)

-		{

-			/* Data endpoints not found within the first Android Accessory device interface, error out */

-			return NoCompatibleInterfaceFound;

-		}

-

-		/* Retrieve the endpoint address from the endpoint descriptor */

-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);

-

-		/* If the endpoint is a IN type endpoint */

-		if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)

-		  DataINEndpoint  = EndpointData;

-		else

-		  DataOUTEndpoint = EndpointData;

-	}

-

-	/* Configure the Android Accessory data IN pipe */

-	Pipe_ConfigurePipe(ANDROID_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,

-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);

-

-	/* Configure the Android Accessory data OUT pipe */

-	Pipe_ConfigurePipe(ANDROID_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,

-					   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);

-

-	/* Valid data found, return success */

-	return SuccessfulConfigRead;

-}

-

-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's

- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration

- *  descriptor processing if an incompatible descriptor configuration is found.

- *

- *  This comparator searches for the next Endpoint descriptor inside the current interface descriptor, aborting the

- *  search if another interface descriptor is found before the required endpoint.

- *

- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum

- */

-uint8_t DCOMP_NextInterfaceBulkEndpoint(void* const CurrentDescriptor)

-{

-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);

-

-	if (Header->Type == DTYPE_Endpoint)

-	{

-		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);

-

-		uint8_t EndpointType = (Endpoint->Attributes & EP_TYPE_MASK);

-		if ((EndpointType == EP_TYPE_BULK) && (!(Pipe_IsEndpointBound(Endpoint->EndpointAddress))))

-		  return DESCRIPTOR_SEARCH_Found;

-	}

-	else if (Header->Type == DTYPE_Interface)

-	{

-		return DESCRIPTOR_SEARCH_Fail;

-	}

-

-	return DESCRIPTOR_SEARCH_NotFound;

-}

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
+ *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
+ *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
+ */
+
+#include "ConfigDescriptor.h"
+
+/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
+ *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
+ *  with compatible devices.
+ *
+ *  This routine searches for the first interface containing bulk IN and OUT data endpoints.
+ *
+ *  \return An error code from the \ref AndroidHost_GetConfigDescriptorDataCodes_t enum.
+ */
+uint8_t ProcessConfigurationDescriptor(void)
+{
+	uint8_t  ConfigDescriptorData[512];
+	void*    CurrConfigLocation = ConfigDescriptorData;
+	uint16_t CurrConfigBytesRem;
+
+	USB_Descriptor_Endpoint_t* DataINEndpoint  = NULL;
+	USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
+
+	/* Retrieve the entire configuration descriptor into the allocated buffer */
+	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
+	{
+		case HOST_GETCONFIG_Successful:
+			break;
+		case HOST_GETCONFIG_InvalidData:
+			return InvalidConfigDataReturned;
+		case HOST_GETCONFIG_BuffOverflow:
+			return DescriptorTooLarge;
+		default:
+			return DevControlError;
+	}
+
+	/* The Android Accessory Mode specification mandates that the accessory communications endpoints
+	   be in the first interface descriptor (interface 0) */
+	USB_GetNextDescriptorOfType(&CurrConfigBytesRem, &CurrConfigLocation, DTYPE_Interface);
+
+	/* Ensure that an interface was found, and the end of the descriptor was not reached */
+	if (!(CurrConfigBytesRem))
+	  return NoCompatibleInterfaceFound;
+
+	while (!(DataINEndpoint) || !(DataOUTEndpoint))
+	{
+		/* Get the next Still Image interface's data endpoint descriptor */
+		if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
+		                              DCOMP_NextInterfaceBulkEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
+		{
+			/* Data endpoints not found within the first Android Accessory device interface, error out */
+			return NoCompatibleInterfaceFound;
+		}
+
+		/* Retrieve the endpoint address from the endpoint descriptor */
+		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
+
+		/* If the endpoint is a IN type endpoint */
+		if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)
+		  DataINEndpoint  = EndpointData;
+		else
+		  DataOUTEndpoint = EndpointData;
+	}
+
+	/* Configure the Android Accessory data IN pipe */
+	Pipe_ConfigurePipe(ANDROID_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,
+	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+
+	/* Configure the Android Accessory data OUT pipe */
+	Pipe_ConfigurePipe(ANDROID_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,
+					   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+
+	/* Valid data found, return success */
+	return SuccessfulConfigRead;
+}
+
+/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
+ *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
+ *  descriptor processing if an incompatible descriptor configuration is found.
+ *
+ *  This comparator searches for the next Endpoint descriptor inside the current interface descriptor, aborting the
+ *  search if another interface descriptor is found before the required endpoint.
+ *
+ *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
+ */
+uint8_t DCOMP_NextInterfaceBulkEndpoint(void* const CurrentDescriptor)
+{
+	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
+
+	if (Header->Type == DTYPE_Endpoint)
+	{
+		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
+
+		uint8_t EndpointType = (Endpoint->Attributes & EP_TYPE_MASK);
+		if ((EndpointType == EP_TYPE_BULK) && (!(Pipe_IsEndpointBound(Endpoint->EndpointAddress))))
+		  return DESCRIPTOR_SEARCH_Found;
+	}
+	else if (Header->Type == DTYPE_Interface)
+	{
+		return DESCRIPTOR_SEARCH_Fail;
+	}
+
+	return DESCRIPTOR_SEARCH_NotFound;
+}
+
diff --git a/Demos/Host/Incomplete/AndroidAccessoryHost/ConfigDescriptor.h b/Demos/Host/Incomplete/AndroidAccessoryHost/ConfigDescriptor.h
index 2d0226b68..92c0d99a9 100644
--- a/Demos/Host/Incomplete/AndroidAccessoryHost/ConfigDescriptor.h
+++ b/Demos/Host/Incomplete/AndroidAccessoryHost/ConfigDescriptor.h
@@ -1,63 +1,63 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header file for ConfigDescriptor.c.

- */

-

-#ifndef _CONFIGDESCRIPTOR_H_

-#define _CONFIGDESCRIPTOR_H_

-

-	/* Includes: */

-		#include <LUFA/Drivers/USB/USB.h>

-

-	/* Macros: */

-		#define ANDROID_DATA_IN_PIPE         1

-		#define ANDROID_DATA_OUT_PIPE        2

-

-	/* Enums: */

-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */

-		enum AndroidHost_GetConfigDescriptorDataCodes_t

-		{

-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */

-			DevControlError                 = 1, /**< A control request to the device failed to complete successfully */

-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */

-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */

-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */

-		};

-

-	/* Function Prototypes: */

-		uint8_t ProcessConfigurationDescriptor(void);

-

-		uint8_t DCOMP_NextInterfaceBulkEndpoint(void* CurrentDescriptor);

-

-#endif

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for ConfigDescriptor.c.
+ */
+
+#ifndef _CONFIGDESCRIPTOR_H_
+#define _CONFIGDESCRIPTOR_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		#define ANDROID_DATA_IN_PIPE         1
+		#define ANDROID_DATA_OUT_PIPE        2
+
+	/* Enums: */
+		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
+		enum AndroidHost_GetConfigDescriptorDataCodes_t
+		{
+			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
+			DevControlError                 = 1, /**< A control request to the device failed to complete successfully */
+			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
+			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
+			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
+		};
+
+	/* Function Prototypes: */
+		uint8_t ProcessConfigurationDescriptor(void);
+
+		uint8_t DCOMP_NextInterfaceBulkEndpoint(void* CurrentDescriptor);
+
+#endif
+
diff --git a/Demos/Host/Incomplete/AndroidAccessoryHost/DeviceDescriptor.c b/Demos/Host/Incomplete/AndroidAccessoryHost/DeviceDescriptor.c
index 4d758a412..4e5a1d4d6 100644
--- a/Demos/Host/Incomplete/AndroidAccessoryHost/DeviceDescriptor.c
+++ b/Demos/Host/Incomplete/AndroidAccessoryHost/DeviceDescriptor.c
@@ -1,70 +1,70 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  USB Device Descriptor processing routines, to determine the overall device parameters. Descriptors are special

- *  computer-readable structures which the host requests upon device enumeration, to determine information about

- *  the attached device.

- */

-

-#include "DeviceDescriptor.h"

-

-/** Reads and processes an attached device's Device Descriptor, to determine compatibility

- *

- *  This routine checks to ensure that the attached device's VID and PID matches Google's for Android devices.

- *

- *  \return An error code from the \ref BluetoothHost_GetDeviceDescriptorDataCodes_t enum.

- */

-uint8_t ProcessDeviceDescriptor(void)

-{

-	USB_Descriptor_Device_t DeviceDescriptor;

-

-	/* Send the request to retrieve the device descriptor */

-	if (USB_Host_GetDeviceDescriptor(&DeviceDescriptor) != HOST_SENDCONTROL_Successful)

-	  return DevControlError;

-

-	/* Validate returned data - ensure the returned data is a device descriptor */

-	if (DeviceDescriptor.Header.Type != DTYPE_Device)

-	  return InvalidDeviceDataReturned;

-

-	/* Validate returned device Class, SubClass and Protocol values against the Bluetooth spec values */

-	if (DeviceDescriptor.VendorID != ANDROID_VENDOR_ID)

-		return IncorrectAndroidDevice;

-

-	if ((DeviceDescriptor.ProductID != ANDROID_ACCESSORY_PRODUCT_ID) ||

-	    (DeviceDescriptor.ProductID != ANDROID_ACCESSORY_ADB_PRODUCT_ID))

-	{

-		return NonAccessoryModeAndroidDevice;

-	}

-

-	return AccessoryModeAndroidDevice;

-}

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptor processing routines, to determine the overall device parameters. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine information about
+ *  the attached device.
+ */
+
+#include "DeviceDescriptor.h"
+
+/** Reads and processes an attached device's Device Descriptor, to determine compatibility
+ *
+ *  This routine checks to ensure that the attached device's VID and PID matches Google's for Android devices.
+ *
+ *  \return An error code from the \ref BluetoothHost_GetDeviceDescriptorDataCodes_t enum.
+ */
+uint8_t ProcessDeviceDescriptor(void)
+{
+	USB_Descriptor_Device_t DeviceDescriptor;
+
+	/* Send the request to retrieve the device descriptor */
+	if (USB_Host_GetDeviceDescriptor(&DeviceDescriptor) != HOST_SENDCONTROL_Successful)
+	  return DevControlError;
+
+	/* Validate returned data - ensure the returned data is a device descriptor */
+	if (DeviceDescriptor.Header.Type != DTYPE_Device)
+	  return InvalidDeviceDataReturned;
+
+	/* Validate returned device Class, SubClass and Protocol values against the Bluetooth spec values */
+	if (DeviceDescriptor.VendorID != ANDROID_VENDOR_ID)
+		return IncorrectAndroidDevice;
+
+	if ((DeviceDescriptor.ProductID != ANDROID_ACCESSORY_PRODUCT_ID) ||
+	    (DeviceDescriptor.ProductID != ANDROID_ACCESSORY_ADB_PRODUCT_ID))
+	{
+		return NonAccessoryModeAndroidDevice;
+	}
+
+	return AccessoryModeAndroidDevice;
+}
+
diff --git a/Demos/Host/Incomplete/AndroidAccessoryHost/DeviceDescriptor.h b/Demos/Host/Incomplete/AndroidAccessoryHost/DeviceDescriptor.h
index 37eb2928f..9259c8add 100644
--- a/Demos/Host/Incomplete/AndroidAccessoryHost/DeviceDescriptor.h
+++ b/Demos/Host/Incomplete/AndroidAccessoryHost/DeviceDescriptor.h
@@ -1,65 +1,65 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header file for DeviceDescriptor.c.

- */

-

-#ifndef _DEVICEDESCRIPTOR_H_

-#define _DEVICEDESCRIPTOR_H_

-

-	/* Includes: */

-		#include <LUFA/Drivers/USB/USB.h>

-

-		#include "AndroidAccessoryHost.h"

-

-	/* Macros: */

-		#define ANDROID_VENDOR_ID                   0x18D1

-		#define ANDROID_ACCESSORY_PRODUCT_ID        0x2D00

-		#define ANDROID_ACCESSORY_ADB_PRODUCT_ID    0x2D01

-

-	/* Enums: */

-		/** Enum for the possible return codes of the \ref ProcessDeviceDescriptor() function. */

-		enum AndroidHost_GetDeviceDescriptorDataCodes_t

-		{

-			SuccessfulDeviceRead            = 0, /**< Device Descriptor was processed successfully */

-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */

-			InvalidDeviceDataReturned       = 2, /**< The device returned an invalid Device Descriptor */

-			IncorrectAndroidDevice          = 3, /**< The attached device is not an Android device */

-			NonAccessoryModeAndroidDevice   = 4, /**< The attached device is an Android device in non-accessory mode */

-			AccessoryModeAndroidDevice      = 5, /**< The attached device is an Android device in accessory mode */

-		};

-

-	/* Function Prototypes: */

-		uint8_t ProcessDeviceDescriptor(void);

-

-#endif

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for DeviceDescriptor.c.
+ */
+
+#ifndef _DEVICEDESCRIPTOR_H_
+#define _DEVICEDESCRIPTOR_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include "AndroidAccessoryHost.h"
+
+	/* Macros: */
+		#define ANDROID_VENDOR_ID                   0x18D1
+		#define ANDROID_ACCESSORY_PRODUCT_ID        0x2D00
+		#define ANDROID_ACCESSORY_ADB_PRODUCT_ID    0x2D01
+
+	/* Enums: */
+		/** Enum for the possible return codes of the \ref ProcessDeviceDescriptor() function. */
+		enum AndroidHost_GetDeviceDescriptorDataCodes_t
+		{
+			SuccessfulDeviceRead            = 0, /**< Device Descriptor was processed successfully */
+			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
+			InvalidDeviceDataReturned       = 2, /**< The device returned an invalid Device Descriptor */
+			IncorrectAndroidDevice          = 3, /**< The attached device is not an Android device */
+			NonAccessoryModeAndroidDevice   = 4, /**< The attached device is an Android device in non-accessory mode */
+			AccessoryModeAndroidDevice      = 5, /**< The attached device is an Android device in accessory mode */
+		};
+
+	/* Function Prototypes: */
+		uint8_t ProcessDeviceDescriptor(void);
+
+#endif
+
diff --git a/Demos/Host/Incomplete/AndroidAccessoryHost/Doxygen.conf b/Demos/Host/Incomplete/AndroidAccessoryHost/Doxygen.conf
index 8c3e62b92..f63497d64 100644
--- a/Demos/Host/Incomplete/AndroidAccessoryHost/Doxygen.conf
+++ b/Demos/Host/Incomplete/AndroidAccessoryHost/Doxygen.conf
@@ -1,1565 +1,1565 @@
-# Doxyfile 1.6.2

-

-# This file describes the settings to be used by the documentation system

-# doxygen (www.doxygen.org) for a project

-#

-# All text after a hash (#) is considered a comment and will be ignored

-# The format is:

-#       TAG = value [value, ...]

-# For lists items can also be appended using:

-#       TAG += value [value, ...]

-# Values that contain spaces should be placed between quotes (" ")

-

-#---------------------------------------------------------------------------

-# Project related configuration options

-#---------------------------------------------------------------------------

-

-# This tag specifies the encoding used for all characters in the config file

-# that follow. The default is UTF-8 which is also the encoding used for all

-# text before the first occurrence of this tag. Doxygen uses libiconv (or the

-# iconv built into libc) for the transcoding. See

-# http://www.gnu.org/software/libiconv for the list of possible encodings.

-

-DOXYFILE_ENCODING      = UTF-8

-

-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded

-# by quotes) that should identify the project.

-

-PROJECT_NAME           = "LUFA Library - Android Accessory Mode Host Demo"

-

-# The PROJECT_NUMBER tag can be used to enter a project or revision number.

-# This could be handy for archiving the generated documentation or

-# if some version control system is used.

-

-PROJECT_NUMBER         = 0.0.0

-

-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)

-# base path where the generated documentation will be put.

-# If a relative path is entered, it will be relative to the location

-# where doxygen was started. If left blank the current directory will be used.

-

-OUTPUT_DIRECTORY       = ./Documentation/

-

-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create

-# 4096 sub-directories (in 2 levels) under the output directory of each output

-# format and will distribute the generated files over these directories.

-# Enabling this option can be useful when feeding doxygen a huge amount of

-# source files, where putting all generated files in the same directory would

-# otherwise cause performance problems for the file system.

-

-CREATE_SUBDIRS         = NO

-

-# The OUTPUT_LANGUAGE tag is used to specify the language in which all

-# documentation generated by doxygen is written. Doxygen will use this

-# information to generate all constant output in the proper language.

-# The default language is English, other supported languages are:

-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,

-# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,

-# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English

-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,

-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,

-# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.

-

-OUTPUT_LANGUAGE        = English

-

-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will

-# include brief member descriptions after the members that are listed in

-# the file and class documentation (similar to JavaDoc).

-# Set to NO to disable this.

-

-BRIEF_MEMBER_DESC      = YES

-

-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend

-# the brief description of a member or function before the detailed description.

-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the

-# brief descriptions will be completely suppressed.

-

-REPEAT_BRIEF           = YES

-

-# This tag implements a quasi-intelligent brief description abbreviator

-# that is used to form the text in various listings. Each string

-# in this list, if found as the leading text of the brief description, will be

-# stripped from the text and the result after processing the whole list, is

-# used as the annotated text. Otherwise, the brief description is used as-is.

-# If left blank, the following values are used ("$name" is automatically

-# replaced with the name of the entity): "The $name class" "The $name widget"

-# "The $name file" "is" "provides" "specifies" "contains"

-# "represents" "a" "an" "the"

-

-ABBREVIATE_BRIEF       = "The $name class" \

-                         "The $name widget" \

-                         "The $name file" \

-                         is \

-                         provides \

-                         specifies \

-                         contains \

-                         represents \

-                         a \

-                         an \

-                         the

-

-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then

-# Doxygen will generate a detailed section even if there is only a brief

-# description.

-

-ALWAYS_DETAILED_SEC    = NO

-

-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all

-# inherited members of a class in the documentation of that class as if those

-# members were ordinary class members. Constructors, destructors and assignment

-# operators of the base classes will not be shown.

-

-INLINE_INHERITED_MEMB  = NO

-

-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full

-# path before files name in the file list and in the header files. If set

-# to NO the shortest path that makes the file name unique will be used.

-

-FULL_PATH_NAMES        = YES

-

-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag

-# can be used to strip a user-defined part of the path. Stripping is

-# only done if one of the specified strings matches the left-hand part of

-# the path. The tag can be used to show relative paths in the file list.

-# If left blank the directory from which doxygen is run is used as the

-# path to strip.

-

-STRIP_FROM_PATH        =

-

-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of

-# the path mentioned in the documentation of a class, which tells

-# the reader which header file to include in order to use a class.

-# If left blank only the name of the header file containing the class

-# definition is used. Otherwise one should specify the include paths that

-# are normally passed to the compiler using the -I flag.

-

-STRIP_FROM_INC_PATH    =

-

-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter

-# (but less readable) file names. This can be useful is your file systems

-# doesn't support long names like on DOS, Mac, or CD-ROM.

-

-SHORT_NAMES            = YES

-

-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen

-# will interpret the first line (until the first dot) of a JavaDoc-style

-# comment as the brief description. If set to NO, the JavaDoc

-# comments will behave just like regular Qt-style comments

-# (thus requiring an explicit @brief command for a brief description.)

-

-JAVADOC_AUTOBRIEF      = NO

-

-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will

-# interpret the first line (until the first dot) of a Qt-style

-# comment as the brief description. If set to NO, the comments

-# will behave just like regular Qt-style comments (thus requiring

-# an explicit \brief command for a brief description.)

-

-QT_AUTOBRIEF           = NO

-

-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen

-# treat a multi-line C++ special comment block (i.e. a block of //! or ///

-# comments) as a brief description. This used to be the default behaviour.

-# The new default is to treat a multi-line C++ comment block as a detailed

-# description. Set this tag to YES if you prefer the old behaviour instead.

-

-MULTILINE_CPP_IS_BRIEF = NO

-

-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented

-# member inherits the documentation from any documented member that it

-# re-implements.

-

-INHERIT_DOCS           = YES

-

-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce

-# a new page for each member. If set to NO, the documentation of a member will

-# be part of the file/class/namespace that contains it.

-

-SEPARATE_MEMBER_PAGES  = NO

-

-# The TAB_SIZE tag can be used to set the number of spaces in a tab.

-# Doxygen uses this value to replace tabs by spaces in code fragments.

-

-TAB_SIZE               = 4

-

-# This tag can be used to specify a number of aliases that acts

-# as commands in the documentation. An alias has the form "name=value".

-# For example adding "sideeffect=\par Side Effects:\n" will allow you to

-# put the command \sideeffect (or @sideeffect) in the documentation, which

-# will result in a user-defined paragraph with heading "Side Effects:".

-# You can put \n's in the value part of an alias to insert newlines.

-

-ALIASES                =

-

-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C

-# sources only. Doxygen will then generate output that is more tailored for C.

-# For instance, some of the names that are used will be different. The list

-# of all members will be omitted, etc.

-

-OPTIMIZE_OUTPUT_FOR_C  = YES

-

-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java

-# sources only. Doxygen will then generate output that is more tailored for

-# Java. For instance, namespaces will be presented as packages, qualified

-# scopes will look different, etc.

-

-OPTIMIZE_OUTPUT_JAVA   = NO

-

-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran

-# sources only. Doxygen will then generate output that is more tailored for

-# Fortran.

-

-OPTIMIZE_FOR_FORTRAN   = NO

-

-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL

-# sources. Doxygen will then generate output that is tailored for

-# VHDL.

-

-OPTIMIZE_OUTPUT_VHDL   = NO

-

-# Doxygen selects the parser to use depending on the extension of the files it parses.

-# With this tag you can assign which parser to use for a given extension.

-# Doxygen has a built-in mapping, but you can override or extend it using this tag.

-# The format is ext=language, where ext is a file extension, and language is one of

-# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,

-# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat

-# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),

-# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.

-

-EXTENSION_MAPPING      =

-

-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want

-# to include (a tag file for) the STL sources as input, then you should

-# set this tag to YES in order to let doxygen match functions declarations and

-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.

-# func(std::string) {}). This also make the inheritance and collaboration

-# diagrams that involve STL classes more complete and accurate.

-

-BUILTIN_STL_SUPPORT    = NO

-

-# If you use Microsoft's C++/CLI language, you should set this option to YES to

-# enable parsing support.

-

-CPP_CLI_SUPPORT        = NO

-

-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.

-# Doxygen will parse them like normal C++ but will assume all classes use public

-# instead of private inheritance when no explicit protection keyword is present.

-

-SIP_SUPPORT            = NO

-

-# For Microsoft's IDL there are propget and propput attributes to indicate getter

-# and setter methods for a property. Setting this option to YES (the default)

-# will make doxygen to replace the get and set methods by a property in the

-# documentation. This will only work if the methods are indeed getting or

-# setting a simple type. If this is not the case, or you want to show the

-# methods anyway, you should set this option to NO.

-

-IDL_PROPERTY_SUPPORT   = YES

-

-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC

-# tag is set to YES, then doxygen will reuse the documentation of the first

-# member in the group (if any) for the other members of the group. By default

-# all members of a group must be documented explicitly.

-

-DISTRIBUTE_GROUP_DOC   = NO

-

-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of

-# the same type (for instance a group of public functions) to be put as a

-# subgroup of that type (e.g. under the Public Functions section). Set it to

-# NO to prevent subgrouping. Alternatively, this can be done per class using

-# the \nosubgrouping command.

-

-SUBGROUPING            = YES

-

-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum

-# is documented as struct, union, or enum with the name of the typedef. So

-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct

-# with name TypeT. When disabled the typedef will appear as a member of a file,

-# namespace, or class. And the struct will be named TypeS. This can typically

-# be useful for C code in case the coding convention dictates that all compound

-# types are typedef'ed and only the typedef is referenced, never the tag name.

-

-TYPEDEF_HIDES_STRUCT   = NO

-

-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to

-# determine which symbols to keep in memory and which to flush to disk.

-# When the cache is full, less often used symbols will be written to disk.

-# For small to medium size projects (<1000 input files) the default value is

-# probably good enough. For larger projects a too small cache size can cause

-# doxygen to be busy swapping symbols to and from disk most of the time

-# causing a significant performance penality.

-# If the system has enough physical memory increasing the cache will improve the

-# performance by keeping more symbols in memory. Note that the value works on

-# a logarithmic scale so increasing the size by one will rougly double the

-# memory usage. The cache size is given by this formula:

-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,

-# corresponding to a cache size of 2^16 = 65536 symbols

-

-SYMBOL_CACHE_SIZE      = 0

-

-#---------------------------------------------------------------------------

-# Build related configuration options

-#---------------------------------------------------------------------------

-

-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in

-# documentation are documented, even if no documentation was available.

-# Private class members and static file members will be hidden unless

-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

-

-EXTRACT_ALL            = YES

-

-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class

-# will be included in the documentation.

-

-EXTRACT_PRIVATE        = YES

-

-# If the EXTRACT_STATIC tag is set to YES all static members of a file

-# will be included in the documentation.

-

-EXTRACT_STATIC         = YES

-

-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)

-# defined locally in source files will be included in the documentation.

-# If set to NO only classes defined in header files are included.

-

-EXTRACT_LOCAL_CLASSES  = YES

-

-# This flag is only useful for Objective-C code. When set to YES local

-# methods, which are defined in the implementation section but not in

-# the interface are included in the documentation.

-# If set to NO (the default) only methods in the interface are included.

-

-EXTRACT_LOCAL_METHODS  = NO

-

-# If this flag is set to YES, the members of anonymous namespaces will be

-# extracted and appear in the documentation as a namespace called

-# 'anonymous_namespace{file}', where file will be replaced with the base

-# name of the file that contains the anonymous namespace. By default

-# anonymous namespace are hidden.

-

-EXTRACT_ANON_NSPACES   = NO

-

-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all

-# undocumented members of documented classes, files or namespaces.

-# If set to NO (the default) these members will be included in the

-# various overviews, but no documentation section is generated.

-# This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_MEMBERS     = NO

-

-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all

-# undocumented classes that are normally visible in the class hierarchy.

-# If set to NO (the default) these classes will be included in the various

-# overviews. This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_CLASSES     = NO

-

-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all

-# friend (class|struct|union) declarations.

-# If set to NO (the default) these declarations will be included in the

-# documentation.

-

-HIDE_FRIEND_COMPOUNDS  = NO

-

-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any

-# documentation blocks found inside the body of a function.

-# If set to NO (the default) these blocks will be appended to the

-# function's detailed documentation block.

-

-HIDE_IN_BODY_DOCS      = NO

-

-# The INTERNAL_DOCS tag determines if documentation

-# that is typed after a \internal command is included. If the tag is set

-# to NO (the default) then the documentation will be excluded.

-# Set it to YES to include the internal documentation.

-

-INTERNAL_DOCS          = NO

-

-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate

-# file names in lower-case letters. If set to YES upper-case letters are also

-# allowed. This is useful if you have classes or files whose names only differ

-# in case and if your file system supports case sensitive file names. Windows

-# and Mac users are advised to set this option to NO.

-

-CASE_SENSE_NAMES       = NO

-

-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen

-# will show members with their full class and namespace scopes in the

-# documentation. If set to YES the scope will be hidden.

-

-HIDE_SCOPE_NAMES       = NO

-

-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen

-# will put a list of the files that are included by a file in the documentation

-# of that file.

-

-SHOW_INCLUDE_FILES     = YES

-

-# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen

-# will list include files with double quotes in the documentation

-# rather than with sharp brackets.

-

-FORCE_LOCAL_INCLUDES   = NO

-

-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]

-# is inserted in the documentation for inline members.

-

-INLINE_INFO            = YES

-

-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen

-# will sort the (detailed) documentation of file and class members

-# alphabetically by member name. If set to NO the members will appear in

-# declaration order.

-

-SORT_MEMBER_DOCS       = YES

-

-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the

-# brief documentation of file, namespace and class members alphabetically

-# by member name. If set to NO (the default) the members will appear in

-# declaration order.

-

-SORT_BRIEF_DOCS        = NO

-

-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.

-

-SORT_MEMBERS_CTORS_1ST = NO

-

-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the

-# hierarchy of group names into alphabetical order. If set to NO (the default)

-# the group names will appear in their defined order.

-

-SORT_GROUP_NAMES       = NO

-

-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be

-# sorted by fully-qualified names, including namespaces. If set to

-# NO (the default), the class list will be sorted only by class name,

-# not including the namespace part.

-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.

-# Note: This option applies only to the class list, not to the

-# alphabetical list.

-

-SORT_BY_SCOPE_NAME     = NO

-

-# The GENERATE_TODOLIST tag can be used to enable (YES) or

-# disable (NO) the todo list. This list is created by putting \todo

-# commands in the documentation.

-

-GENERATE_TODOLIST      = NO

-

-# The GENERATE_TESTLIST tag can be used to enable (YES) or

-# disable (NO) the test list. This list is created by putting \test

-# commands in the documentation.

-

-GENERATE_TESTLIST      = NO

-

-# The GENERATE_BUGLIST tag can be used to enable (YES) or

-# disable (NO) the bug list. This list is created by putting \bug

-# commands in the documentation.

-

-GENERATE_BUGLIST       = NO

-

-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or

-# disable (NO) the deprecated list. This list is created by putting

-# \deprecated commands in the documentation.

-

-GENERATE_DEPRECATEDLIST= YES

-

-# The ENABLED_SECTIONS tag can be used to enable conditional

-# documentation sections, marked by \if sectionname ... \endif.

-

-ENABLED_SECTIONS       =

-

-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines

-# the initial value of a variable or define consists of for it to appear in

-# the documentation. If the initializer consists of more lines than specified

-# here it will be hidden. Use a value of 0 to hide initializers completely.

-# The appearance of the initializer of individual variables and defines in the

-# documentation can be controlled using \showinitializer or \hideinitializer

-# command in the documentation regardless of this setting.

-

-MAX_INITIALIZER_LINES  = 30

-

-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated

-# at the bottom of the documentation of classes and structs. If set to YES the

-# list will mention the files that were used to generate the documentation.

-

-SHOW_USED_FILES        = YES

-

-# If the sources in your project are distributed over multiple directories

-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy

-# in the documentation. The default is NO.

-

-SHOW_DIRECTORIES       = YES

-

-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.

-# This will remove the Files entry from the Quick Index and from the

-# Folder Tree View (if specified). The default is YES.

-

-SHOW_FILES             = YES

-

-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the

-# Namespaces page.

-# This will remove the Namespaces entry from the Quick Index

-# and from the Folder Tree View (if specified). The default is YES.

-

-SHOW_NAMESPACES        = YES

-

-# The FILE_VERSION_FILTER tag can be used to specify a program or script that

-# doxygen should invoke to get the current version for each file (typically from

-# the version control system). Doxygen will invoke the program by executing (via

-# popen()) the command <command> <input-file>, where <command> is the value of

-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file

-# provided by doxygen. Whatever the program writes to standard output

-# is used as the file version. See the manual for examples.

-

-FILE_VERSION_FILTER    =

-

-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by

-# doxygen. The layout file controls the global structure of the generated output files

-# in an output format independent way. The create the layout file that represents

-# doxygen's defaults, run doxygen with the -l option. You can optionally specify a

-# file name after the option, if omitted DoxygenLayout.xml will be used as the name

-# of the layout file.

-

-LAYOUT_FILE            =

-

-#---------------------------------------------------------------------------

-# configuration options related to warning and progress messages

-#---------------------------------------------------------------------------

-

-# The QUIET tag can be used to turn on/off the messages that are generated

-# by doxygen. Possible values are YES and NO. If left blank NO is used.

-

-QUIET                  = YES

-

-# The WARNINGS tag can be used to turn on/off the warning messages that are

-# generated by doxygen. Possible values are YES and NO. If left blank

-# NO is used.

-

-WARNINGS               = YES

-

-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings

-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will

-# automatically be disabled.

-

-WARN_IF_UNDOCUMENTED   = YES

-

-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for

-# potential errors in the documentation, such as not documenting some

-# parameters in a documented function, or documenting parameters that

-# don't exist or using markup commands wrongly.

-

-WARN_IF_DOC_ERROR      = YES

-

-# This WARN_NO_PARAMDOC option can be abled to get warnings for

-# functions that are documented, but have no documentation for their parameters

-# or return value. If set to NO (the default) doxygen will only warn about

-# wrong or incomplete parameter documentation, but not about the absence of

-# documentation.

-

-WARN_NO_PARAMDOC       = YES

-

-# The WARN_FORMAT tag determines the format of the warning messages that

-# doxygen can produce. The string should contain the $file, $line, and $text

-# tags, which will be replaced by the file and line number from which the

-# warning originated and the warning text. Optionally the format may contain

-# $version, which will be replaced by the version of the file (if it could

-# be obtained via FILE_VERSION_FILTER)

-

-WARN_FORMAT            = "$file:$line: $text"

-

-# The WARN_LOGFILE tag can be used to specify a file to which warning

-# and error messages should be written. If left blank the output is written

-# to stderr.

-

-WARN_LOGFILE           =

-

-#---------------------------------------------------------------------------

-# configuration options related to the input files

-#---------------------------------------------------------------------------

-

-# The INPUT tag can be used to specify the files and/or directories that contain

-# documented source files. You may enter file names like "myfile.cpp" or

-# directories like "/usr/src/myproject". Separate the files or directories

-# with spaces.

-

-INPUT                  = ./

-

-# This tag can be used to specify the character encoding of the source files

-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is

-# also the default input encoding. Doxygen uses libiconv (or the iconv built

-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for

-# the list of possible encodings.

-

-INPUT_ENCODING         = UTF-8

-

-# If the value of the INPUT tag contains directories, you can use the

-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank the following patterns are tested:

-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx

-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90

-

-FILE_PATTERNS          = *.h \

-                         *.c \

-                         *.txt

-

-# The RECURSIVE tag can be used to turn specify whether or not subdirectories

-# should be searched for input files as well. Possible values are YES and NO.

-# If left blank NO is used.

-

-RECURSIVE              = YES

-

-# The EXCLUDE tag can be used to specify files and/or directories that should

-# excluded from the INPUT source files. This way you can easily exclude a

-# subdirectory from a directory tree whose root is specified with the INPUT tag.

-

-EXCLUDE                = Documentation/

-

-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or

-# directories that are symbolic links (a Unix filesystem feature) are excluded

-# from the input.

-

-EXCLUDE_SYMLINKS       = NO

-

-# If the value of the INPUT tag contains directories, you can use the

-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude

-# certain files from those directories. Note that the wildcards are matched

-# against the file with absolute path, so to exclude all test directories

-# for example use the pattern */test/*

-

-EXCLUDE_PATTERNS       = 

-

-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names

-# (namespaces, classes, functions, etc.) that should be excluded from the

-# output. The symbol name can be a fully qualified name, a word, or if the

-# wildcard * is used, a substring. Examples: ANamespace, AClass,

-# AClass::ANamespace, ANamespace::*Test

-

-EXCLUDE_SYMBOLS        = __* \

-                         INCLUDE_FROM_*

-

-# The EXAMPLE_PATH tag can be used to specify one or more files or

-# directories that contain example code fragments that are included (see

-# the \include command).

-

-EXAMPLE_PATH           =

-

-# If the value of the EXAMPLE_PATH tag contains directories, you can use the

-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank all files are included.

-

-EXAMPLE_PATTERNS       = *

-

-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be

-# searched for input files to be used with the \include or \dontinclude

-# commands irrespective of the value of the RECURSIVE tag.

-# Possible values are YES and NO. If left blank NO is used.

-

-EXAMPLE_RECURSIVE      = NO

-

-# The IMAGE_PATH tag can be used to specify one or more files or

-# directories that contain image that are included in the documentation (see

-# the \image command).

-

-IMAGE_PATH             =

-

-# The INPUT_FILTER tag can be used to specify a program that doxygen should

-# invoke to filter for each input file. Doxygen will invoke the filter program

-# by executing (via popen()) the command <filter> <input-file>, where <filter>

-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an

-# input file. Doxygen will then use the output that the filter program writes

-# to standard output.

-# If FILTER_PATTERNS is specified, this tag will be

-# ignored.

-

-INPUT_FILTER           =

-

-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern

-# basis.

-# Doxygen will compare the file name with each pattern and apply the

-# filter if there is a match.

-# The filters are a list of the form:

-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further

-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER

-# is applied to all files.

-

-FILTER_PATTERNS        =

-

-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using

-# INPUT_FILTER) will be used to filter the input files when producing source

-# files to browse (i.e. when SOURCE_BROWSER is set to YES).

-

-FILTER_SOURCE_FILES    = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to source browsing

-#---------------------------------------------------------------------------

-

-# If the SOURCE_BROWSER tag is set to YES then a list of source files will

-# be generated. Documented entities will be cross-referenced with these sources.

-# Note: To get rid of all source code in the generated output, make sure also

-# VERBATIM_HEADERS is set to NO.

-

-SOURCE_BROWSER         = NO

-

-# Setting the INLINE_SOURCES tag to YES will include the body

-# of functions and classes directly in the documentation.

-

-INLINE_SOURCES         = NO

-

-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct

-# doxygen to hide any special comment blocks from generated source code

-# fragments. Normal C and C++ comments will always remain visible.

-

-STRIP_CODE_COMMENTS    = YES

-

-# If the REFERENCED_BY_RELATION tag is set to YES

-# then for each documented function all documented

-# functions referencing it will be listed.

-

-REFERENCED_BY_RELATION = NO

-

-# If the REFERENCES_RELATION tag is set to YES

-# then for each documented function all documented entities

-# called/used by that function will be listed.

-

-REFERENCES_RELATION    = NO

-

-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)

-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from

-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will

-# link to the source code.

-# Otherwise they will link to the documentation.

-

-REFERENCES_LINK_SOURCE = NO

-

-# If the USE_HTAGS tag is set to YES then the references to source code

-# will point to the HTML generated by the htags(1) tool instead of doxygen

-# built-in source browser. The htags tool is part of GNU's global source

-# tagging system (see http://www.gnu.org/software/global/global.html). You

-# will need version 4.8.6 or higher.

-

-USE_HTAGS              = NO

-

-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen

-# will generate a verbatim copy of the header file for each class for

-# which an include is specified. Set to NO to disable this.

-

-VERBATIM_HEADERS       = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the alphabetical class index

-#---------------------------------------------------------------------------

-

-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index

-# of all compounds will be generated. Enable this if the project

-# contains a lot of classes, structs, unions or interfaces.

-

-ALPHABETICAL_INDEX     = YES

-

-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then

-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns

-# in which this list will be split (can be a number in the range [1..20])

-

-COLS_IN_ALPHA_INDEX    = 5

-

-# In case all classes in a project start with a common prefix, all

-# classes will be put under the same header in the alphabetical index.

-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that

-# should be ignored while generating the index headers.

-

-IGNORE_PREFIX          =

-

-#---------------------------------------------------------------------------

-# configuration options related to the HTML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will

-# generate HTML output.

-

-GENERATE_HTML          = YES

-

-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `html' will be used as the default path.

-

-HTML_OUTPUT            = html

-

-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for

-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank

-# doxygen will generate files with .html extension.

-

-HTML_FILE_EXTENSION    = .html

-

-# The HTML_HEADER tag can be used to specify a personal HTML header for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard header.

-

-HTML_HEADER            =

-

-# The HTML_FOOTER tag can be used to specify a personal HTML footer for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard footer.

-

-HTML_FOOTER            =

-

-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading

-# style sheet that is used by each HTML page. It can be used to

-# fine-tune the look of the HTML output. If the tag is left blank doxygen

-# will generate a default style sheet. Note that doxygen will try to copy

-# the style sheet file to the HTML output directory, so don't put your own

-# stylesheet in the HTML output directory as well, or it will be erased!

-

-HTML_STYLESHEET        =

-

-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML

-# page will contain the date and time when the page was generated. Setting

-# this to NO can help when comparing the output of multiple runs.

-

-HTML_TIMESTAMP         = NO

-

-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,

-# files or namespaces will be aligned in HTML using tables. If set to

-# NO a bullet list will be used.

-

-HTML_ALIGN_MEMBERS     = YES

-

-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML

-# documentation will contain sections that can be hidden and shown after the

-# page has loaded. For this to work a browser that supports

-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox

-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).

-

-HTML_DYNAMIC_SECTIONS  = YES

-

-# If the GENERATE_DOCSET tag is set to YES, additional index files

-# will be generated that can be used as input for Apple's Xcode 3

-# integrated development environment, introduced with OSX 10.5 (Leopard).

-# To create a documentation set, doxygen will generate a Makefile in the

-# HTML output directory. Running make will produce the docset in that

-# directory and running "make install" will install the docset in

-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find

-# it at startup.

-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.

-

-GENERATE_DOCSET        = NO

-

-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the

-# feed. A documentation feed provides an umbrella under which multiple

-# documentation sets from a single provider (such as a company or product suite)

-# can be grouped.

-

-DOCSET_FEEDNAME        = "Doxygen generated docs"

-

-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that

-# should uniquely identify the documentation set bundle. This should be a

-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen

-# will append .docset to the name.

-

-DOCSET_BUNDLE_ID       = org.doxygen.Project

-

-# If the GENERATE_HTMLHELP tag is set to YES, additional index files

-# will be generated that can be used as input for tools like the

-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)

-# of the generated HTML documentation.

-

-GENERATE_HTMLHELP      = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can

-# be used to specify the file name of the resulting .chm file. You

-# can add a path in front of the file if the result should not be

-# written to the html output directory.

-

-CHM_FILE               =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can

-# be used to specify the location (absolute path including file name) of

-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run

-# the HTML help compiler on the generated index.hhp.

-

-HHC_LOCATION           =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag

-# controls if a separate .chi index file is generated (YES) or that

-# it should be included in the master .chm file (NO).

-

-GENERATE_CHI           = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING

-# is used to encode HtmlHelp index (hhk), content (hhc) and project file

-# content.

-

-CHM_INDEX_ENCODING     =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag

-# controls whether a binary table of contents is generated (YES) or a

-# normal table of contents (NO) in the .chm file.

-

-BINARY_TOC             = NO

-

-# The TOC_EXPAND flag can be set to YES to add extra items for group members

-# to the contents of the HTML help documentation and to the tree view.

-

-TOC_EXPAND             = YES

-

-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER

-# are set, an additional index file will be generated that can be used as input for

-# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated

-# HTML documentation.

-

-GENERATE_QHP           = NO

-

-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can

-# be used to specify the file name of the resulting .qch file.

-# The path specified is relative to the HTML output folder.

-

-QCH_FILE               =

-

-# The QHP_NAMESPACE tag specifies the namespace to use when generating

-# Qt Help Project output. For more information please see

-# http://doc.trolltech.com/qthelpproject.html#namespace

-

-QHP_NAMESPACE          = org.doxygen.Project

-

-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating

-# Qt Help Project output. For more information please see

-# http://doc.trolltech.com/qthelpproject.html#virtual-folders

-

-QHP_VIRTUAL_FOLDER     = doc

-

-# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.

-# For more information please see

-# http://doc.trolltech.com/qthelpproject.html#custom-filters

-

-QHP_CUST_FILTER_NAME   =

-

-# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see

-# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.

-

-QHP_CUST_FILTER_ATTRS  =

-

-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's

-# filter section matches.

-# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.

-

-QHP_SECT_FILTER_ATTRS  =

-

-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can

-# be used to specify the location of Qt's qhelpgenerator.

-# If non-empty doxygen will try to run qhelpgenerator on the generated

-# .qhp file.

-

-QHG_LOCATION           =

-

-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files

-#  will be generated, which together with the HTML files, form an Eclipse help

-#  plugin. To install this plugin and make it available under the help contents

-# menu in Eclipse, the contents of the directory containing the HTML and XML

-# files needs to be copied into the plugins directory of eclipse. The name of

-# the directory within the plugins directory should be the same as

-# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears.

-

-GENERATE_ECLIPSEHELP   = NO

-

-# A unique identifier for the eclipse help plugin. When installing the plugin

-# the directory name containing the HTML and XML files should also have

-# this name.

-

-ECLIPSE_DOC_ID         = org.doxygen.Project

-

-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at

-# top of each HTML page. The value NO (the default) enables the index and

-# the value YES disables it.

-

-DISABLE_INDEX          = NO

-

-# This tag can be used to set the number of enum values (range [1..20])

-# that doxygen will group on one line in the generated HTML documentation.

-

-ENUM_VALUES_PER_LINE   = 1

-

-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index

-# structure should be generated to display hierarchical information.

-# If the tag value is set to YES, a side panel will be generated

-# containing a tree-like index structure (just like the one that

-# is generated for HTML Help). For this to work a browser that supports

-# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).

-# Windows users are probably better off using the HTML help feature.

-

-GENERATE_TREEVIEW      = YES

-

-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,

-# and Class Hierarchy pages using a tree view instead of an ordered list.

-

-USE_INLINE_TREES       = NO

-

-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be

-# used to set the initial width (in pixels) of the frame in which the tree

-# is shown.

-

-TREEVIEW_WIDTH         = 250

-

-# Use this tag to change the font size of Latex formulas included

-# as images in the HTML documentation. The default is 10. Note that

-# when you change the font size after a successful doxygen run you need

-# to manually remove any form_*.png images from the HTML output directory

-# to force them to be regenerated.

-

-FORMULA_FONTSIZE       = 10

-

-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript

-# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should

-# typically be disabled. For large projects the javascript based search engine

-# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.

-

-SEARCHENGINE           = NO

-

-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index

-# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup

-# and does not have live searching capabilities.

-

-SERVER_BASED_SEARCH    = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the LaTeX output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will

-# generate Latex output.

-

-GENERATE_LATEX         = NO

-

-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `latex' will be used as the default path.

-

-LATEX_OUTPUT           = latex

-

-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be

-# invoked. If left blank `latex' will be used as the default command name.

-# Note that when enabling USE_PDFLATEX this option is only used for

-# generating bitmaps for formulas in the HTML output, but not in the

-# Makefile that is written to the output directory.

-

-LATEX_CMD_NAME         = latex

-

-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to

-# generate index for LaTeX. If left blank `makeindex' will be used as the

-# default command name.

-

-MAKEINDEX_CMD_NAME     = makeindex

-

-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact

-# LaTeX documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_LATEX          = NO

-

-# The PAPER_TYPE tag can be used to set the paper type that is used

-# by the printer. Possible values are: a4, a4wide, letter, legal and

-# executive. If left blank a4wide will be used.

-

-PAPER_TYPE             = a4wide

-

-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX

-# packages that should be included in the LaTeX output.

-

-EXTRA_PACKAGES         =

-

-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for

-# the generated latex document. The header should contain everything until

-# the first chapter. If it is left blank doxygen will generate a

-# standard header. Notice: only use this tag if you know what you are doing!

-

-LATEX_HEADER           =

-

-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated

-# is prepared for conversion to pdf (using ps2pdf). The pdf file will

-# contain links (just like the HTML output) instead of page references

-# This makes the output suitable for online browsing using a pdf viewer.

-

-PDF_HYPERLINKS         = YES

-

-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of

-# plain latex in the generated Makefile. Set this option to YES to get a

-# higher quality PDF documentation.

-

-USE_PDFLATEX           = YES

-

-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.

-# command to the generated LaTeX files. This will instruct LaTeX to keep

-# running if errors occur, instead of asking the user for help.

-# This option is also used when generating formulas in HTML.

-

-LATEX_BATCHMODE        = NO

-

-# If LATEX_HIDE_INDICES is set to YES then doxygen will not

-# include the index chapters (such as File Index, Compound Index, etc.)

-# in the output.

-

-LATEX_HIDE_INDICES     = NO

-

-# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.

-

-LATEX_SOURCE_CODE      = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the RTF output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output

-# The RTF output is optimized for Word 97 and may not look very pretty with

-# other RTF readers or editors.

-

-GENERATE_RTF           = NO

-

-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `rtf' will be used as the default path.

-

-RTF_OUTPUT             = rtf

-

-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact

-# RTF documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_RTF            = NO

-

-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated

-# will contain hyperlink fields. The RTF file will

-# contain links (just like the HTML output) instead of page references.

-# This makes the output suitable for online browsing using WORD or other

-# programs which support those fields.

-# Note: wordpad (write) and others do not support links.

-

-RTF_HYPERLINKS         = NO

-

-# Load stylesheet definitions from file. Syntax is similar to doxygen's

-# config file, i.e. a series of assignments. You only have to provide

-# replacements, missing definitions are set to their default value.

-

-RTF_STYLESHEET_FILE    =

-

-# Set optional variables used in the generation of an rtf document.

-# Syntax is similar to doxygen's config file.

-

-RTF_EXTENSIONS_FILE    =

-

-#---------------------------------------------------------------------------

-# configuration options related to the man page output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will

-# generate man pages

-

-GENERATE_MAN           = NO

-

-# The MAN_OUTPUT tag is used to specify where the man pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `man' will be used as the default path.

-

-MAN_OUTPUT             = man

-

-# The MAN_EXTENSION tag determines the extension that is added to

-# the generated man pages (default is the subroutine's section .3)

-

-MAN_EXTENSION          = .3

-

-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,

-# then it will generate one additional man file for each entity

-# documented in the real man page(s). These additional files

-# only source the real man page, but without them the man command

-# would be unable to find the correct page. The default is NO.

-

-MAN_LINKS              = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the XML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_XML tag is set to YES Doxygen will

-# generate an XML file that captures the structure of

-# the code including all documentation.

-

-GENERATE_XML           = NO

-

-# The XML_OUTPUT tag is used to specify where the XML pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `xml' will be used as the default path.

-

-XML_OUTPUT             = xml

-

-# The XML_SCHEMA tag can be used to specify an XML schema,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_SCHEMA             =

-

-# The XML_DTD tag can be used to specify an XML DTD,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_DTD                =

-

-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will

-# dump the program listings (including syntax highlighting

-# and cross-referencing information) to the XML output. Note that

-# enabling this will significantly increase the size of the XML output.

-

-XML_PROGRAMLISTING     = YES

-

-#---------------------------------------------------------------------------

-# configuration options for the AutoGen Definitions output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will

-# generate an AutoGen Definitions (see autogen.sf.net) file

-# that captures the structure of the code including all

-# documentation. Note that this feature is still experimental

-# and incomplete at the moment.

-

-GENERATE_AUTOGEN_DEF   = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the Perl module output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_PERLMOD tag is set to YES Doxygen will

-# generate a Perl module file that captures the structure of

-# the code including all documentation. Note that this

-# feature is still experimental and incomplete at the

-# moment.

-

-GENERATE_PERLMOD       = NO

-

-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate

-# the necessary Makefile rules, Perl scripts and LaTeX code to be able

-# to generate PDF and DVI output from the Perl module output.

-

-PERLMOD_LATEX          = NO

-

-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be

-# nicely formatted so it can be parsed by a human reader.

-# This is useful

-# if you want to understand what is going on.

-# On the other hand, if this

-# tag is set to NO the size of the Perl module output will be much smaller

-# and Perl will parse it just the same.

-

-PERLMOD_PRETTY         = YES

-

-# The names of the make variables in the generated doxyrules.make file

-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.

-# This is useful so different doxyrules.make files included by the same

-# Makefile don't overwrite each other's variables.

-

-PERLMOD_MAKEVAR_PREFIX =

-

-#---------------------------------------------------------------------------

-# Configuration options related to the preprocessor

-#---------------------------------------------------------------------------

-

-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will

-# evaluate all C-preprocessor directives found in the sources and include

-# files.

-

-ENABLE_PREPROCESSING   = YES

-

-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro

-# names in the source code. If set to NO (the default) only conditional

-# compilation will be performed. Macro expansion can be done in a controlled

-# way by setting EXPAND_ONLY_PREDEF to YES.

-

-MACRO_EXPANSION        = YES

-

-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES

-# then the macro expansion is limited to the macros specified with the

-# PREDEFINED and EXPAND_AS_DEFINED tags.

-

-EXPAND_ONLY_PREDEF     = YES

-

-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files

-# in the INCLUDE_PATH (see below) will be search if a #include is found.

-

-SEARCH_INCLUDES        = YES

-

-# The INCLUDE_PATH tag can be used to specify one or more directories that

-# contain include files that are not input files but should be processed by

-# the preprocessor.

-

-INCLUDE_PATH           =

-

-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard

-# patterns (like *.h and *.hpp) to filter out the header-files in the

-# directories. If left blank, the patterns specified with FILE_PATTERNS will

-# be used.

-

-INCLUDE_FILE_PATTERNS  =

-

-# The PREDEFINED tag can be used to specify one or more macro names that

-# are defined before the preprocessor is started (similar to the -D option of

-# gcc). The argument of the tag is a list of macros of the form: name

-# or name=definition (no spaces). If the definition and the = are

-# omitted =1 is assumed. To prevent a macro definition from being

-# undefined via #undef or recursively expanded use the := operator

-# instead of the = operator.

-

-PREDEFINED             = __DOXYGEN__ \

-                         PROGMEM

-

-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then

-# this tag can be used to specify a list of macro names that should be expanded.

-# The macro definition that is found in the sources will be used.

-# Use the PREDEFINED tag if you want to use a different macro definition.

-

-EXPAND_AS_DEFINED      = 

-

-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then

-# doxygen's preprocessor will remove all function-like macros that are alone

-# on a line, have an all uppercase name, and do not end with a semicolon. Such

-# function macros are typically used for boiler-plate code, and will confuse

-# the parser if not removed.

-

-SKIP_FUNCTION_MACROS   = YES

-

-#---------------------------------------------------------------------------

-# Configuration::additions related to external references

-#---------------------------------------------------------------------------

-

-# The TAGFILES option can be used to specify one or more tagfiles.

-# Optionally an initial location of the external documentation

-# can be added for each tagfile. The format of a tag file without

-# this location is as follows:

-#

-# TAGFILES = file1 file2 ...

-# Adding location for the tag files is done as follows:

-#

-# TAGFILES = file1=loc1 "file2 = loc2" ...

-# where "loc1" and "loc2" can be relative or absolute paths or

-# URLs. If a location is present for each tag, the installdox tool

-# does not have to be run to correct the links.

-# Note that each tag file must have a unique name

-# (where the name does NOT include the path)

-# If a tag file is not located in the directory in which doxygen

-# is run, you must also specify the path to the tagfile here.

-

-TAGFILES               =

-

-# When a file name is specified after GENERATE_TAGFILE, doxygen will create

-# a tag file that is based on the input files it reads.

-

-GENERATE_TAGFILE       =

-

-# If the ALLEXTERNALS tag is set to YES all external classes will be listed

-# in the class index. If set to NO only the inherited external classes

-# will be listed.

-

-ALLEXTERNALS           = NO

-

-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed

-# in the modules index. If set to NO, only the current project's groups will

-# be listed.

-

-EXTERNAL_GROUPS        = YES

-

-# The PERL_PATH should be the absolute path and name of the perl script

-# interpreter (i.e. the result of `which perl').

-

-PERL_PATH              = /usr/bin/perl

-

-#---------------------------------------------------------------------------

-# Configuration options related to the dot tool

-#---------------------------------------------------------------------------

-

-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will

-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base

-# or super classes. Setting the tag to NO turns the diagrams off. Note that

-# this option is superseded by the HAVE_DOT option below. This is only a

-# fallback. It is recommended to install and use dot, since it yields more

-# powerful graphs.

-

-CLASS_DIAGRAMS         = NO

-

-# You can define message sequence charts within doxygen comments using the \msc

-# command. Doxygen will then run the mscgen tool (see

-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the

-# documentation. The MSCGEN_PATH tag allows you to specify the directory where

-# the mscgen tool resides. If left empty the tool is assumed to be found in the

-# default search path.

-

-MSCGEN_PATH            =

-

-# If set to YES, the inheritance and collaboration graphs will hide

-# inheritance and usage relations if the target is undocumented

-# or is not a class.

-

-HIDE_UNDOC_RELATIONS   = YES

-

-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is

-# available from the path. This tool is part of Graphviz, a graph visualization

-# toolkit from AT&T and Lucent Bell Labs. The other options in this section

-# have no effect if this option is set to NO (the default)

-

-HAVE_DOT               = NO

-

-# By default doxygen will write a font called FreeSans.ttf to the output

-# directory and reference it in all dot files that doxygen generates. This

-# font does not include all possible unicode characters however, so when you need

-# these (or just want a differently looking font) you can specify the font name

-# using DOT_FONTNAME. You need need to make sure dot is able to find the font,

-# which can be done by putting it in a standard location or by setting the

-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory

-# containing the font.

-

-DOT_FONTNAME           = FreeSans

-

-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.

-# The default size is 10pt.

-

-DOT_FONTSIZE           = 10

-

-# By default doxygen will tell dot to use the output directory to look for the

-# FreeSans.ttf font (which doxygen will put there itself). If you specify a

-# different font using DOT_FONTNAME you can set the path where dot

-# can find it using this tag.

-

-DOT_FONTPATH           =

-

-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect inheritance relations. Setting this tag to YES will force the

-# the CLASS_DIAGRAMS tag to NO.

-

-CLASS_GRAPH            = NO

-

-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect implementation dependencies (inheritance, containment, and

-# class references variables) of the class with other documented classes.

-

-COLLABORATION_GRAPH    = NO

-

-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for groups, showing the direct groups dependencies

-

-GROUP_GRAPHS           = NO

-

-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and

-# collaboration diagrams in a style similar to the OMG's Unified Modeling

-# Language.

-

-UML_LOOK               = NO

-

-# If set to YES, the inheritance and collaboration graphs will show the

-# relations between templates and their instances.

-

-TEMPLATE_RELATIONS     = NO

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT

-# tags are set to YES then doxygen will generate a graph for each documented

-# file showing the direct and indirect include dependencies of the file with

-# other documented files.

-

-INCLUDE_GRAPH          = NO

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and

-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each

-# documented header file showing the documented files that directly or

-# indirectly include this file.

-

-INCLUDED_BY_GRAPH      = NO

-

-# If the CALL_GRAPH and HAVE_DOT options are set to YES then

-# doxygen will generate a call dependency graph for every global function

-# or class method. Note that enabling this option will significantly increase

-# the time of a run. So in most cases it will be better to enable call graphs

-# for selected functions only using the \callgraph command.

-

-CALL_GRAPH             = NO

-

-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then

-# doxygen will generate a caller dependency graph for every global function

-# or class method. Note that enabling this option will significantly increase

-# the time of a run. So in most cases it will be better to enable caller

-# graphs for selected functions only using the \callergraph command.

-

-CALLER_GRAPH           = NO

-

-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen

-# will graphical hierarchy of all classes instead of a textual one.

-

-GRAPHICAL_HIERARCHY    = NO

-

-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES

-# then doxygen will show the dependencies a directory has on other directories

-# in a graphical way. The dependency relations are determined by the #include

-# relations between the files in the directories.

-

-DIRECTORY_GRAPH        = NO

-

-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images

-# generated by dot. Possible values are png, jpg, or gif

-# If left blank png will be used.

-

-DOT_IMAGE_FORMAT       = png

-

-# The tag DOT_PATH can be used to specify the path where the dot tool can be

-# found. If left blank, it is assumed the dot tool can be found in the path.

-

-DOT_PATH               =

-

-# The DOTFILE_DIRS tag can be used to specify one or more directories that

-# contain dot files that are included in the documentation (see the

-# \dotfile command).

-

-DOTFILE_DIRS           =

-

-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of

-# nodes that will be shown in the graph. If the number of nodes in a graph

-# becomes larger than this value, doxygen will truncate the graph, which is

-# visualized by representing a node as a red box. Note that doxygen if the

-# number of direct children of the root node in a graph is already larger than

-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note

-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.

-

-DOT_GRAPH_MAX_NODES    = 15

-

-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the

-# graphs generated by dot. A depth value of 3 means that only nodes reachable

-# from the root by following a path via at most 3 edges will be shown. Nodes

-# that lay further from the root node will be omitted. Note that setting this

-# option to 1 or 2 may greatly reduce the computation time needed for large

-# code bases. Also note that the size of a graph can be further restricted by

-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.

-

-MAX_DOT_GRAPH_DEPTH    = 2

-

-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent

-# background. This is disabled by default, because dot on Windows does not

-# seem to support this out of the box. Warning: Depending on the platform used,

-# enabling this option may lead to badly anti-aliased labels on the edges of

-# a graph (i.e. they become hard to read).

-

-DOT_TRANSPARENT        = YES

-

-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output

-# files in one run (i.e. multiple -o and -T options on the command line). This

-# makes dot run faster, but since only newer versions of dot (>1.8.10)

-# support this, this feature is disabled by default.

-

-DOT_MULTI_TARGETS      = NO

-

-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will

-# generate a legend page explaining the meaning of the various boxes and

-# arrows in the dot generated graphs.

-

-GENERATE_LEGEND        = YES

-

-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will

-# remove the intermediate dot files that are used to generate

-# the various graphs.

-

-DOT_CLEANUP            = YES

+# Doxyfile 1.6.2
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "LUFA Library - Android Accessory Mode Host Demo"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         = 0.0.0
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it parses.
+# With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this tag.
+# The format is ext=language, where ext is a file extension, and language is one of
+# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
+# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
+# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
+# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
+# doxygen. The layout file controls the global structure of the generated output files
+# in an output format independent way. The create the layout file that represents
+# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
+# file name after the option, if omitted DoxygenLayout.xml will be used as the name
+# of the layout file.
+
+LAYOUT_FILE            =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       = 
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = YES
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        =
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
+# are set, an additional index file will be generated that can be used as input for
+# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
+# HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
+# For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+#  plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = YES
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      = 
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = NO
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/Demos/Host/Incomplete/AndroidAccessoryHost/makefile b/Demos/Host/Incomplete/AndroidAccessoryHost/makefile
index 76c92454a..ad8a7311f 100644
--- a/Demos/Host/Incomplete/AndroidAccessoryHost/makefile
+++ b/Demos/Host/Incomplete/AndroidAccessoryHost/makefile
@@ -1,715 +1,715 @@
-# Hey Emacs, this is a -*- makefile -*-

-#----------------------------------------------------------------------------

-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.

-#  >> Modified for use with the LUFA project. <<

-#

-# Released to the Public Domain

-#

-# Additional material for this makefile was written by:

-# Peter Fleury

-# Tim Henigan

-# Colin O'Flynn

-# Reiner Patommel

-# Markus Pfaff

-# Sander Pool

-# Frederik Rouleau

-# Carlos Lamas

-# Dean Camera

-# Opendous Inc.

-# Denver Gingerich

-#

-#----------------------------------------------------------------------------

-# On command line:

-#

-# make all = Make software.

-#

-# make clean = Clean out built project files.

-#

-# make coff = Convert ELF to AVR COFF.

-#

-# make extcoff = Convert ELF to AVR Extended COFF.

-#

-# make program = Download the hex file to the device, using avrdude.

-#                Please customize the avrdude settings below first!

-#

-# make dfu = Download the hex file to the device, using dfu-programmer (must

-#            have dfu-programmer installed).

-#

-# make flip = Download the hex file to the device, using Atmel FLIP (must

-#             have Atmel FLIP installed).

-#

-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

-#               (must have dfu-programmer installed).

-#

-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

-#                (must have Atmel FLIP installed).

-#

-# make doxygen = Generate DoxyGen documentation for the project (must have

-#                DoxyGen installed)

-#

-# make debug = Start either simulavr or avarice as specified for debugging,

-#              with avr-gdb or avr-insight as the front end for debugging.

-#

-# make filename.s = Just compile filename.c into the assembler code only.

-#

-# make filename.i = Create a preprocessed source file for use in submitting

-#                   bug reports to the GCC project.

-#

-# To rebuild project do "make clean" then "make all".

-#----------------------------------------------------------------------------

-

-

-# MCU name

-MCU = at90usb1287

-

-

-# Target architecture (see library "Board Types" documentation).

-ARCH = AVR8

-

-

-# Target board (see library "Board Types" documentation, NONE for projects not requiring

-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called

-# "Board" inside the application directory.

-BOARD = USBKEY

-

-

-# Processor frequency.

-#     This will define a symbol, F_CPU, in all source code files equal to the

-#     processor frequency in Hz. You can then use this symbol in your source code to

-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

-#     automatically to create a 32-bit value in your source code.

-#

-#     This will be an integer division of F_USB below, as it is sourced by

-#     F_USB after it has run through any CPU prescalers. Note that this value

-#     does not *change* the processor frequency - it should merely be updated to

-#     reflect the processor speed set externally so that the code can use accurate

-#     software delays.

-F_CPU = 8000000

-

-

-# Input clock frequency.

-#     This will define a symbol, F_USB, in all source code files equal to the

-#     input clock frequency (before any prescaling is performed) in Hz. This value may

-#     differ from F_CPU if prescaling is used on the latter, and is required as the

-#     raw input clock is fed directly to the PLL sections of the AVR for high speed

-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'

-#     at the end, this will be done automatically to create a 32-bit value in your

-#     source code.

-#

-#     If no clock division is performed on the input clock inside the AVR (via the

-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_USB = $(F_CPU)

-

-

-# Output format. (can be srec, ihex, binary)

-FORMAT = ihex

-

-

-# Target file name (without extension).

-TARGET = AndroidAccessoryHost

-

-

-# Object files directory

-#     To put object files in current directory, use a dot (.), do NOT make

-#     this an empty or blank macro!

-OBJDIR = .

-

-

-# Path to the LUFA library

-LUFA_PATH = ../../../..

-

-

-# LUFA library compile-time options and predefined tokens

-LUFA_OPTS  = -D USB_HOST_ONLY

-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"

-

-

-# Create the LUFA source path variables by including the LUFA root makefile

-include $(LUFA_PATH)/LUFA/makefile

-

-

-# List C source files here. (C dependencies are automatically generated.)

-SRC = $(TARGET).c                                                 \

-	  DeviceDescriptor.c                                          \

-	  ConfigDescriptor.c                                          \

-	  $(LUFA_SRC_USB)                                             \

-	  $(LUFA_SRC_SERIAL)

-

-

-# List C++ source files here. (C dependencies are automatically generated.)

-CPPSRC =

-

-

-# List Assembler source files here.

-#     Make them always end in a capital .S.  Files ending in a lowercase .s

-#     will not be considered source files but generated files (assembler

-#     output from the compiler), and will be deleted upon "make clean"!

-#     Even though the DOS/Win* filesystem matches both .s and .S the same,

-#     it will preserve the spelling of the filenames, and gcc itself does

-#     care about how the name is spelled on its command-line.

-ASRC =

-

-

-# Optimization level, can be [0, 1, 2, 3, s].

-#     0 = turn off optimization. s = optimize for size.

-#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)

-OPT = s

-

-

-# Debugging format.

-#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.

-#     AVR Studio 4.10 requires dwarf-2.

-#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.

-DEBUG = dwarf-2

-

-

-# List any extra directories to look for include files here.

-#     Each directory must be seperated by a space.

-#     Use forward slashes for directory separators.

-#     For a directory that has spaces, enclose it in quotes.

-EXTRAINCDIRS = $(LUFA_PATH)/

-

-

-# Compiler flag to set the C Standard level.

-#     c89   = "ANSI" C

-#     gnu89 = c89 plus GCC extensions

-#     c99   = ISO C99 standard (not yet fully implemented)

-#     gnu99 = c99 plus GCC extensions

-CSTANDARD = -std=c99

-

-

-# Place -D or -U options here for C sources

-CDEFS  = -DF_CPU=$(F_CPU)UL

-CDEFS += -DF_USB=$(F_USB)UL

-CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)

-CDEFS += $(LUFA_OPTS)

-

-

-# Place -D or -U options here for ASM sources

-ADEFS  = -DF_CPU=$(F_CPU)

-ADEFS += -DF_USB=$(F_USB)UL

-ADEFS += -DBOARD=BOARD_$(BOARD)

-ADEFS += $(LUFA_OPTS)

-

-# Place -D or -U options here for C++ sources

-CPPDEFS  = -DF_CPU=$(F_CPU)UL

-CPPDEFS += -DF_USB=$(F_USB)UL

-CPPDEFS += -DBOARD=BOARD_$(BOARD)

-CPPDEFS += $(LUFA_OPTS)

-#CPPDEFS += -D__STDC_LIMIT_MACROS

-#CPPDEFS += -D__STDC_CONSTANT_MACROS

-

-

-

-#---------------- Compiler Options C ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CFLAGS = -g$(DEBUG)

-CFLAGS += $(CDEFS)

-CFLAGS += -O$(OPT)

-CFLAGS += -funsigned-char

-CFLAGS += -funsigned-bitfields

-CFLAGS += -ffunction-sections

-CFLAGS += -fno-inline-small-functions

-CFLAGS += -fpack-struct

-CFLAGS += -fshort-enums

-CFLAGS += -fno-strict-aliasing

-CFLAGS += -Wall

-CFLAGS += -Wstrict-prototypes

-#CFLAGS += -mshort-calls

-#CFLAGS += -fno-unit-at-a-time

-#CFLAGS += -Wundef

-#CFLAGS += -Wunreachable-code

-#CFLAGS += -Wsign-compare

-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-CFLAGS += $(CSTANDARD)

-

-

-#---------------- Compiler Options C++ ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CPPFLAGS = -g$(DEBUG)

-CPPFLAGS += $(CPPDEFS)

-CPPFLAGS += -O$(OPT)

-CPPFLAGS += -funsigned-char

-CPPFLAGS += -funsigned-bitfields

-CPPFLAGS += -fpack-struct

-CPPFLAGS += -fshort-enums

-CPPFLAGS += -fno-exceptions

-CPPFLAGS += -Wall

-CPPFLAGS += -Wundef

-#CPPFLAGS += -mshort-calls

-#CPPFLAGS += -fno-unit-at-a-time

-#CPPFLAGS += -Wstrict-prototypes

-#CPPFLAGS += -Wunreachable-code

-#CPPFLAGS += -Wsign-compare

-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-#CPPFLAGS += $(CSTANDARD)

-

-

-#---------------- Assembler Options ----------------

-#  -Wa,...:   tell GCC to pass this to the assembler.

-#  -adhlns:   create listing

-#  -gstabs:   have the assembler create line number information; note that

-#             for use in COFF files, additional information about filenames

-#             and function names needs to be present in the assembler source

-#             files -- see avr-libc docs [FIXME: not yet described there]

-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex

-#       dump that will be displayed for a given single line of source input.

-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

-

-

-#---------------- Library Options ----------------

-# Minimalistic printf version

-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min

-

-# Floating point printf version (requires MATH_LIB = -lm below)

-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt

-

-# If this is left blank, then it will use the Standard printf version.

-PRINTF_LIB =

-#PRINTF_LIB = $(PRINTF_LIB_MIN)

-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)

-

-

-# Minimalistic scanf version

-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min

-

-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)

-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt

-

-# If this is left blank, then it will use the Standard scanf version.

-SCANF_LIB =

-#SCANF_LIB = $(SCANF_LIB_MIN)

-#SCANF_LIB = $(SCANF_LIB_FLOAT)

-

-

-MATH_LIB = -lm

-

-

-# List any extra directories to look for libraries here.

-#     Each directory must be seperated by a space.

-#     Use forward slashes for directory separators.

-#     For a directory that has spaces, enclose it in quotes.

-EXTRALIBDIRS =

-

-

-

-#---------------- External Memory Options ----------------

-

-# 64 KB of external RAM, starting after internal RAM (ATmega128!),

-# used for variables (.data/.bss) and heap (malloc()).

-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff

-

-# 64 KB of external RAM, starting after internal RAM (ATmega128!),

-# only used for heap (malloc()).

-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff

-

-EXTMEMOPTS =

-

-

-

-#---------------- Linker Options ----------------

-#  -Wl,...:     tell GCC to pass this to linker.

-#    -Map:      create map file

-#    --cref:    add cross reference to  map file

-LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref

-LDFLAGS += -Wl,--relax

-LDFLAGS += -Wl,--gc-sections

-LDFLAGS += $(EXTMEMOPTS)

-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))

-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)

-#LDFLAGS += -T linker_script.x

-

-

-

-#---------------- Programming Options (avrdude) ----------------

-

-# Programming hardware

-# Type: avrdude -c ?

-# to get a full listing.

-#

-AVRDUDE_PROGRAMMER = jtagmkII

-

-# com1 = serial port. Use lpt1 to connect to parallel port.

-AVRDUDE_PORT = usb

-

-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex

-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep

-

-

-# Uncomment the following if you want avrdude's erase cycle counter.

-# Note that this counter needs to be initialized first using -Yn,

-# see avrdude manual.

-#AVRDUDE_ERASE_COUNTER = -y

-

-# Uncomment the following if you do /not/ wish a verification to be

-# performed after programming the device.

-#AVRDUDE_NO_VERIFY = -V

-

-# Increase verbosity level.  Please use this when submitting bug

-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>

-# to submit bug reports.

-#AVRDUDE_VERBOSE = -v -v

-

-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)

-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)

-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)

-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)

-

-

-

-#---------------- Debugging Options ----------------

-

-# For simulavr only - target MCU frequency.

-DEBUG_MFREQ = $(F_CPU)

-

-# Set the DEBUG_UI to either gdb or insight.

-# DEBUG_UI = gdb

-DEBUG_UI = insight

-

-# Set the debugging back-end to either avarice, simulavr.

-DEBUG_BACKEND = avarice

-#DEBUG_BACKEND = simulavr

-

-# GDB Init Filename.

-GDBINIT_FILE = __avr_gdbinit

-

-# When using avarice settings for the JTAG

-JTAG_DEV = /dev/com1

-

-# Debugging port used to communicate between GDB / avarice / simulavr.

-DEBUG_PORT = 4242

-

-# Debugging host used to communicate between GDB / avarice / simulavr, normally

-#     just set to localhost unless doing some sort of crazy debugging when

-#     avarice is running on a different computer.

-DEBUG_HOST = localhost

-

-

-

-#============================================================================

-

-

-# Define programs and commands.

-SHELL = sh

-CC = avr-gcc

-OBJCOPY = avr-objcopy

-OBJDUMP = avr-objdump

-SIZE = avr-size

-AR = avr-ar rcs

-NM = avr-nm

-AVRDUDE = avrdude

-REMOVE = rm -f

-REMOVEDIR = rm -rf

-COPY = cp

-WINSHELL = cmd

-

-

-# Define Messages

-# English

-MSG_ERRORS_NONE = Errors: none

-MSG_BEGIN = -------- begin --------

-MSG_END = --------  end  --------

-MSG_SIZE_BEFORE = Size before:

-MSG_SIZE_AFTER = Size after:

-MSG_COFF = Converting to AVR COFF:

-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:

-MSG_FLASH = Creating load file for Flash:

-MSG_EEPROM = Creating load file for EEPROM:

-MSG_EXTENDED_LISTING = Creating Extended Listing:

-MSG_SYMBOL_TABLE = Creating Symbol Table:

-MSG_LINKING = Linking:

-MSG_COMPILING = Compiling C:

-MSG_COMPILING_CPP = Compiling C++:

-MSG_ASSEMBLING = Assembling:

-MSG_CLEANING = Cleaning project:

-MSG_CREATING_LIBRARY = Creating library:

-

-

-

-

-# Define all object files.

-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

-

-# Define all listing files.

-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

-

-

-# Compiler flags to generate dependency files.

-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d

-

-

-# Combine all necessary flags and optional flags.

-# Add target processor to flags.

-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)

-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)

-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)

-

-

-

-

-

-# Default target.

-all: begin gccversion sizebefore build sizeafter end

-

-# Change the build target to build a HEX file or a library.

-build: elf hex eep lss sym

-#build: lib

-

-

-elf: $(TARGET).elf

-hex: $(TARGET).hex

-eep: $(TARGET).eep

-lss: $(TARGET).lss

-sym: $(TARGET).sym

-LIBNAME=lib$(TARGET).a

-lib: $(LIBNAME)

-

-

-

-# Eye candy.

-# AVR Studio 3.x does not check make's exit code but relies on

-# the following magic strings to be generated by the compile job.

-begin:

-	@echo

-	@echo $(MSG_BEGIN)

-

-end:

-	@echo $(MSG_END)

-	@echo

-

-

-# Display size of file.

-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex

-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf

-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )

-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )

-

-

-sizebefore:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-sizeafter:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-

-

-# Display compiler version information.

-gccversion :

-	@$(CC) --version

-

-

-# Program the device.

-program: $(TARGET).hex $(TARGET).eep

-	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)

-

-flip: $(TARGET).hex

-	batchisp -hardware usb -device $(MCU) -operation erase f

-	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-

-dfu: $(TARGET).hex

-	dfu-programmer $(MCU) erase

-	dfu-programmer $(MCU) flash $(TARGET).hex

-	dfu-programmer $(MCU) reset

-

-flip-ee: $(TARGET).hex $(TARGET).eep

-	$(COPY) $(TARGET).eep $(TARGET)eep.hex

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-	$(REMOVE) $(TARGET)eep.hex

-

-dfu-ee: $(TARGET).hex $(TARGET).eep

-	dfu-programmer $(MCU) eeprom-flash $(TARGET).eep

-	dfu-programmer $(MCU) reset

-

-

-# Generate avr-gdb config/init file which does the following:

-#     define the reset signal, load the target file, connect to target, and set

-#     a breakpoint at main().

-gdb-config:

-	@$(REMOVE) $(GDBINIT_FILE)

-	@echo define reset >> $(GDBINIT_FILE)

-	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)

-	@echo end >> $(GDBINIT_FILE)

-	@echo file $(TARGET).elf >> $(GDBINIT_FILE)

-	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)

-ifeq ($(DEBUG_BACKEND),simulavr)

-	@echo load  >> $(GDBINIT_FILE)

-endif

-	@echo break main >> $(GDBINIT_FILE)

-

-debug: gdb-config $(TARGET).elf

-ifeq ($(DEBUG_BACKEND), avarice)

-	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.

-	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \

-	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)

-	@$(WINSHELL) /c pause

-

-else

-	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \

-	$(DEBUG_MFREQ) --port $(DEBUG_PORT)

-endif

-	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)

-

-

-

-

-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.

-COFFCONVERT = $(OBJCOPY) --debugging

-COFFCONVERT += --change-section-address .data-0x800000

-COFFCONVERT += --change-section-address .bss-0x800000

-COFFCONVERT += --change-section-address .noinit-0x800000

-COFFCONVERT += --change-section-address .eeprom-0x810000

-

-

-

-coff: $(TARGET).elf

-	@echo

-	@echo $(MSG_COFF) $(TARGET).cof

-	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof

-

-

-extcoff: $(TARGET).elf

-	@echo

-	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof

-	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof

-

-

-

-# Create final output files (.hex, .eep) from ELF output file.

-%.hex: %.elf

-	@echo

-	@echo $(MSG_FLASH) $@

-	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@

-

-%.eep: %.elf

-	@echo

-	@echo $(MSG_EEPROM) $@

-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \

-	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0

-

-# Create extended listing file from ELF output file.

-%.lss: %.elf

-	@echo

-	@echo $(MSG_EXTENDED_LISTING) $@

-	$(OBJDUMP) -h -S -z $< > $@

-

-# Create a symbol table from ELF output file.

-%.sym: %.elf

-	@echo

-	@echo $(MSG_SYMBOL_TABLE) $@

-	$(NM) -n $< > $@

-

-

-

-# Create library from object files.

-.SECONDARY : $(TARGET).a

-.PRECIOUS : $(OBJ)

-%.a: $(OBJ)

-	@echo

-	@echo $(MSG_CREATING_LIBRARY) $@

-	$(AR) $@ $(OBJ)

-

-

-# Link: create ELF output file from object files.

-.SECONDARY : $(TARGET).elf

-.PRECIOUS : $(OBJ)

-%.elf: $(OBJ)

-	@echo

-	@echo $(MSG_LINKING) $@

-	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)

-

-

-# Compile: create object files from C source files.

-$(OBJDIR)/%.o : %.c

-	@echo

-	@echo $(MSG_COMPILING) $<

-	$(CC) -c $(ALL_CFLAGS) $< -o $@

-

-

-# Compile: create object files from C++ source files.

-$(OBJDIR)/%.o : %.cpp

-	@echo

-	@echo $(MSG_COMPILING_CPP) $<

-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@

-

-

-# Compile: create assembler files from C source files.

-%.s : %.c

-	$(CC) -S $(ALL_CFLAGS) $< -o $@

-

-

-# Compile: create assembler files from C++ source files.

-%.s : %.cpp

-	$(CC) -S $(ALL_CPPFLAGS) $< -o $@

-

-

-# Assemble: create object files from assembler source files.

-$(OBJDIR)/%.o : %.S

-	@echo

-	@echo $(MSG_ASSEMBLING) $<

-	$(CC) -c $(ALL_ASFLAGS) $< -o $@

-

-

-# Create preprocessed source for use in sending a bug report.

-%.i : %.c

-	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@

-

-

-# Target: clean project.

-clean: begin clean_list end

-

-clean_list :

-	@echo

-	@echo $(MSG_CLEANING)

-	$(REMOVE) $(TARGET).hex

-	$(REMOVE) $(TARGET).eep

-	$(REMOVE) $(TARGET).cof

-	$(REMOVE) $(TARGET).elf

-	$(REMOVE) $(TARGET).map

-	$(REMOVE) $(TARGET).sym

-	$(REMOVE) $(TARGET).lss

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

-	$(REMOVE) $(SRC:.c=.s)

-	$(REMOVE) $(SRC:.c=.d)

-	$(REMOVE) $(SRC:.c=.i)

-	$(REMOVEDIR) .dep

-

-doxygen:

-	@echo Generating Project Documentation...

-	@doxygen Doxygen.conf

-	@echo Documentation Generation Complete.

-

-clean_doxygen:

-	rm -rf Documentation

-

-# Create object files directory

-$(shell mkdir $(OBJDIR) 2>/dev/null)

-

-

-# Include the dependency files.

--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)

-

-

-# Listing of phony targets.

-.PHONY : all begin finish end sizebefore sizeafter gccversion \

-build elf hex eep lss sym coff extcoff doxygen clean          \

-clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \

-debug gdb-config

-

+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+#  >> Modified for use with the LUFA project. <<
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+# Dean Camera
+# Opendous Inc.
+# Denver Gingerich
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+#                Please customize the avrdude settings below first!
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make doxygen = Generate DoxyGen documentation for the project (must have
+#                DoxyGen installed)
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+
+# MCU name
+MCU = at90usb1287
+
+
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
+# "Board" inside the application directory.
+BOARD = USBKEY
+
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 8000000
+
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+
+# Target file name (without extension).
+TARGET = AndroidAccessoryHost
+
+
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+OBJDIR = .
+
+
+# Path to the LUFA library
+LUFA_PATH = ../../../..
+
+
+# LUFA library compile-time options and predefined tokens
+LUFA_OPTS  = -D USB_HOST_ONLY
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+
+
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(TARGET).c                                                 \
+	  DeviceDescriptor.c                                          \
+	  ConfigDescriptor.c                                          \
+	  $(LUFA_SRC_USB)                                             \
+	  $(LUFA_SRC_SERIAL)
+
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+
+# List Assembler source files here.
+#     Make them always end in a capital .S.  Files ending in a lowercase .s
+#     will not be considered source files but generated files (assembler
+#     output from the compiler), and will be deleted upon "make clean"!
+#     Even though the DOS/Win* filesystem matches both .s and .S the same,
+#     it will preserve the spelling of the filenames, and gcc itself does
+#     care about how the name is spelled on its command-line.
+ASRC =
+
+
+# Optimization level, can be [0, 1, 2, 3, s].
+#     0 = turn off optimization. s = optimize for size.
+#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = s
+
+
+# Debugging format.
+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+#     AVR Studio 4.10 requires dwarf-2.
+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+
+# List any extra directories to look for include files here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = $(LUFA_PATH)/
+
+
+# Compiler flag to set the C Standard level.
+#     c89   = "ANSI" C
+#     gnu89 = c89 plus GCC extensions
+#     c99   = ISO C99 standard (not yet fully implemented)
+#     gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=c99
+
+
+# Place -D or -U options here for C sources
+CDEFS  = -DF_CPU=$(F_CPU)UL
+CDEFS += -DF_USB=$(F_USB)UL
+CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
+CDEFS += $(LUFA_OPTS)
+
+
+# Place -D or -U options here for ASM sources
+ADEFS  = -DF_CPU=$(F_CPU)
+ADEFS += -DF_USB=$(F_USB)UL
+ADEFS += -DBOARD=BOARD_$(BOARD)
+ADEFS += $(LUFA_OPTS)
+
+# Place -D or -U options here for C++ sources
+CPPDEFS  = -DF_CPU=$(F_CPU)UL
+CPPDEFS += -DF_USB=$(F_USB)UL
+CPPDEFS += -DBOARD=BOARD_$(BOARD)
+CPPDEFS += $(LUFA_OPTS)
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+
+
+#---------------- Compiler Options C ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
+CFLAGS += -fno-inline-small-functions
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+CFLAGS += -fno-strict-aliasing
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+
+
+#---------------- Compiler Options C++ ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CPPFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+
+
+#---------------- Assembler Options ----------------
+#  -Wa,...:   tell GCC to pass this to the assembler.
+#  -adhlns:   create listing
+#  -gstabs:   have the assembler create line number information; note that
+#             for use in COFF files, additional information about filenames
+#             and function names needs to be present in the assembler source
+#             files -- see avr-libc docs [FIXME: not yet described there]
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
+#       dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB =
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB =
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+
+MATH_LIB = -lm
+
+
+# List any extra directories to look for libraries here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
+#---------------- Linker Options ----------------
+#  -Wl,...:     tell GCC to pass this to linker.
+#    -Map:      create map file
+#    --cref:    add cross reference to  map file
+LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = jtagmkII
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = usb
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+#     just set to localhost unless doing some sort of crazy debugging when
+#     avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = --------  end  --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+
+
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+
+
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex eep lss sym
+#build: lib
+
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@echo
+	@echo $(MSG_BEGIN)
+
+end:
+	@echo $(MSG_END)
+	@echo
+
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
+MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
+FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
+
+
+sizebefore:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+sizeafter:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+
+
+# Display compiler version information.
+gccversion :
+	@$(CC) --version
+
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+flip: $(TARGET).hex
+	batchisp -hardware usb -device $(MCU) -operation erase f
+	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(TARGET).hex
+	dfu-programmer $(MCU) erase
+	dfu-programmer $(MCU) flash $(TARGET).hex
+	dfu-programmer $(MCU) reset
+
+flip-ee: $(TARGET).hex $(TARGET).eep
+	$(COPY) $(TARGET).eep $(TARGET)eep.hex
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+	$(REMOVE) $(TARGET)eep.hex
+
+dfu-ee: $(TARGET).hex $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
+	dfu-programmer $(MCU) reset
+
+
+# Generate avr-gdb config/init file which does the following:
+#     define the reset signal, load the target file, connect to target, and set
+#     a breakpoint at main().
+gdb-config:
+	@$(REMOVE) $(GDBINIT_FILE)
+	@echo define reset >> $(GDBINIT_FILE)
+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+	@echo end >> $(GDBINIT_FILE)
+	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+	@echo load  >> $(GDBINIT_FILE)
+endif
+	@echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+	@$(WINSHELL) /c pause
+
+else
+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+
+
+coff: $(TARGET).elf
+	@echo
+	@echo $(MSG_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+	@echo
+	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
+
+%.eep: %.elf
+	@echo
+	@echo $(MSG_EEPROM) $@
+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+	@echo
+	@echo $(MSG_EXTENDED_LISTING) $@
+	$(OBJDUMP) -h -S -z $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+	@echo
+	@echo $(MSG_SYMBOL_TABLE) $@
+	$(NM) -n $< > $@
+
+
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+	@echo
+	@echo $(MSG_CREATING_LIBRARY) $@
+	$(AR) $@ $(OBJ)
+
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+	@echo
+	@echo $(MSG_LINKING) $@
+	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+	@echo
+	@echo $(MSG_COMPILING) $<
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+	@echo
+	@echo $(MSG_COMPILING_CPP) $<
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+	$(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+	@echo
+	@echo $(MSG_ASSEMBLING) $<
+	$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+	@echo
+	@echo $(MSG_CLEANING)
+	$(REMOVE) $(TARGET).hex
+	$(REMOVE) $(TARGET).eep
+	$(REMOVE) $(TARGET).cof
+	$(REMOVE) $(TARGET).elf
+	$(REMOVE) $(TARGET).map
+	$(REMOVE) $(TARGET).sym
+	$(REMOVE) $(TARGET).lss
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+	$(REMOVE) $(SRC:.c=.s)
+	$(REMOVE) $(SRC:.c=.d)
+	$(REMOVE) $(SRC:.c=.i)
+	$(REMOVEDIR) .dep
+
+doxygen:
+	@echo Generating Project Documentation...
+	@doxygen Doxygen.conf
+	@echo Documentation Generation Complete.
+
+clean_doxygen:
+	rm -rf Documentation
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff doxygen clean          \
+clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
+debug gdb-config
+
diff --git a/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.c b/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.c
index e364b7bca..dac137468 100644
--- a/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.c
+++ b/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.c
@@ -1,273 +1,273 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Main source file for the AudioInputHost demo. This file contains the main tasks of

- *  the demo and is responsible for the initial application hardware configuration.

- */

-

-#include "AudioInputHost.h"

-

-/** Main program entry point. This routine configures the hardware required by the application, then

- *  enters a loop to run the application tasks in sequence.

- */

-int main(void)

-{

-	SetupHardware();

-

-	puts_P(PSTR(ESC_FG_CYAN "Audio Input Host Demo running.\r\n" ESC_FG_WHITE));

-

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-	sei();

-

-	for (;;)

-	{

-		Audio_Task();

-		USB_USBTask();

-	}

-}

-

-/** Configures the board hardware and chip peripherals for the demo's functionality. */

-void SetupHardware(void)

-{

-	/* Disable watchdog if enabled by bootloader/fuses */

-	MCUSR &= ~(1 << WDRF);

-	wdt_disable();

-

-	/* Disable clock division */

-	clock_prescale_set(clock_div_1);

-

-	/* Hardware Initialization */

-	Serial_Init(9600, false);

-	LEDs_Init();

-	USB_Init();

-

-	/* Create a stdio stream for the serial port for stdin and stdout */

-	Serial_CreateStream(NULL);

-}

-

-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and

- *  starts the library USB task to begin the enumeration and USB management process.

- */

-void EVENT_USB_Host_DeviceAttached(void)

-{

-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));

-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);

-}

-

-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and

- *  stops the library USB task management process.

- */

-void EVENT_USB_Host_DeviceUnattached(void)

-{

-	puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-}

-

-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully

- *  enumerated by the host and is now ready to be used by the application.

- */

-void EVENT_USB_Host_DeviceEnumerationComplete(void)

-{

-	LEDs_SetAllLEDs(LEDMASK_USB_READY);

-}

-

-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */

-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)

-{

-	USB_Disable();

-

-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"

-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-	for(;;);

-}

-

-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while

- *  enumerating an attached USB device.

- */

-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,

-                                            const uint8_t SubErrorCode)

-{

-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"

-	                         " -- Error Code %d\r\n"

-	                         " -- Sub Error Code %d\r\n"

-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-}

-

-void Audio_Task(void)

-{

-	uint8_t ErrorCode;

-

-	switch (USB_HostState)

-	{

-		case HOST_STATE_Addressed:

-			puts_P(PSTR("Getting Config Data.\r\n"));

-

-			/* Get and process the configuration descriptor data */

-			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)

-			{

-				if (ErrorCode == ControlError)

-				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));

-				else

-				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));

-

-				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error status */

-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-

-			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */

-			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)

-			{

-				printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"

-				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error status */

-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-			

-			if ((ErrorCode = USB_Host_SetInterfaceAltSetting(StreamingInterfaceIndex,

-			                                                 StreamingInterfaceAltSetting)) != HOST_SENDCONTROL_Successful)

-			{

-				printf_P(PSTR(ESC_FG_RED "Could not set alternative streaming interface setting.\r\n"

-				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error status */

-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-

-			USB_ControlRequest = (USB_Request_Header_t)

-				{

-					.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT),

-					.bRequest      = AUDIO_REQ_SetCurrent,

-					.wValue        = (AUDIO_EPCONTROL_SamplingFreq << 8),

-					.wIndex        = StreamingEndpointAddress,

-					.wLength       = sizeof(USB_Audio_SampleFreq_t),

-				};

-				

-			USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);

-

-			/* Select the control pipe for the request transfer */

-			Pipe_SelectPipe(PIPE_CONTROLPIPE);

-

-			/* Set the sample rate on the streaming interface endpoint */

-			if ((ErrorCode = USB_Host_SendControlRequest(&SampleRate)) != HOST_SENDCONTROL_Successful)

-			{

-				/* Indicate error status */

-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-	

-			/* Sample reload timer initialization */

-			TIMSK0  = (1 << OCIE0A);

-			OCR0A   = ((F_CPU / 8 / 48000) - 1);

-			TCCR0A  = (1 << WGM01);  // CTC mode

-			TCCR0B  = (1 << CS01);   // Fcpu/8 speed	

-

-			/* Set speaker as output */

-			DDRC   |= (1 << 6);

-

-			/* PWM speaker timer initialization */

-			TCCR3A  = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)); // Set on match, clear on TOP

-			TCCR3B  = ((1 << WGM32) | (1 << CS30));  // Fast 8-Bit PWM, F_CPU speed

-			

-			puts_P(PSTR("Microphone Enumerated.\r\n"));

-

-			USB_HostState = HOST_STATE_Configured;

-			break;

-		case HOST_STATE_Configured:

-			/* Do nothing - audio stream is handled by the timer interrupt routine */

-			break;

-	}

-}

-

-/** ISR to handle the reloading of the PWM timer with the next sample. */

-ISR(TIMER0_COMPA_vect, ISR_BLOCK)

-{

-	uint8_t PrevPipe = Pipe_GetCurrentPipe();

-

-	Pipe_SelectPipe(AUDIO_DATA_IN_PIPE);

-	Pipe_Unfreeze();

-

-	/* Check if the current pipe can be read from (contains a packet) and the device is sending data */

-	if (Pipe_IsINReceived())

-	{

-		/* Retrieve the signed 16-bit audio sample, convert to 8-bit */

-		int8_t Sample_8Bit = (Pipe_Read_16_LE() >> 8);

-

-		/* Check to see if the bank is now empty */

-		if (!(Pipe_IsReadWriteAllowed()))

-		{

-			/* Acknowledge the packet, clear the bank ready for the next packet */

-			Pipe_ClearIN();

-		}

-

-		/* Load the sample into the PWM timer channel */

-		OCR3A = (Sample_8Bit ^ (1 << 7));

-

-		uint8_t LEDMask = LEDS_NO_LEDS;

-

-		/* Turn on LEDs as the sample amplitude increases */

-		if (Sample_8Bit > 16)

-		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4);

-		else if (Sample_8Bit > 8)

-		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3);

-		else if (Sample_8Bit > 4)

-		  LEDMask = (LEDS_LED1 | LEDS_LED2);

-		else if (Sample_8Bit > 2)

-		  LEDMask = (LEDS_LED1);

-

-		LEDs_SetAllLEDs(LEDMask);

-	}

-	

-	Pipe_Freeze();

-	Pipe_SelectPipe(PrevPipe);

-}

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the AudioInputHost demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "AudioInputHost.h"
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	puts_P(PSTR(ESC_FG_CYAN "Audio Input Host Demo running.\r\n" ESC_FG_WHITE));
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	sei();
+
+	for (;;)
+	{
+		Audio_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+
+	/* Hardware Initialization */
+	Serial_Init(9600, false);
+	LEDs_Init();
+	USB_Init();
+
+	/* Create a stdio stream for the serial port for stdin and stdout */
+	Serial_CreateStream(NULL);
+}
+
+/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Host_DeviceAttached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
+ *  stops the library USB task management process.
+ */
+void EVENT_USB_Host_DeviceUnattached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
+ *  enumerated by the host and is now ready to be used by the application.
+ */
+void EVENT_USB_Host_DeviceEnumerationComplete(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+}
+
+/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
+{
+	USB_Disable();
+
+	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
+	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	for(;;);
+}
+
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
+ *  enumerating an attached USB device.
+ */
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
+                                            const uint8_t SubErrorCode)
+{
+	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
+	                         " -- Error Code %d\r\n"
+	                         " -- Sub Error Code %d\r\n"
+	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+}
+
+void Audio_Task(void)
+{
+	uint8_t ErrorCode;
+
+	switch (USB_HostState)
+	{
+		case HOST_STATE_Addressed:
+			puts_P(PSTR("Getting Config Data.\r\n"));
+
+			/* Get and process the configuration descriptor data */
+			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
+			{
+				if (ErrorCode == ControlError)
+				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
+				else
+				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
+
+				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error status */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
+			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
+			{
+				printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
+				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error status */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+			
+			if ((ErrorCode = USB_Host_SetInterfaceAltSetting(StreamingInterfaceIndex,
+			                                                 StreamingInterfaceAltSetting)) != HOST_SENDCONTROL_Successful)
+			{
+				printf_P(PSTR(ESC_FG_RED "Could not set alternative streaming interface setting.\r\n"
+				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error status */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			USB_ControlRequest = (USB_Request_Header_t)
+				{
+					.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT),
+					.bRequest      = AUDIO_REQ_SetCurrent,
+					.wValue        = (AUDIO_EPCONTROL_SamplingFreq << 8),
+					.wIndex        = StreamingEndpointAddress,
+					.wLength       = sizeof(USB_Audio_SampleFreq_t),
+				};
+				
+			USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);
+
+			/* Select the control pipe for the request transfer */
+			Pipe_SelectPipe(PIPE_CONTROLPIPE);
+
+			/* Set the sample rate on the streaming interface endpoint */
+			if ((ErrorCode = USB_Host_SendControlRequest(&SampleRate)) != HOST_SENDCONTROL_Successful)
+			{
+				/* Indicate error status */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+	
+			/* Sample reload timer initialization */
+			TIMSK0  = (1 << OCIE0A);
+			OCR0A   = ((F_CPU / 8 / 48000) - 1);
+			TCCR0A  = (1 << WGM01);  // CTC mode
+			TCCR0B  = (1 << CS01);   // Fcpu/8 speed	
+
+			/* Set speaker as output */
+			DDRC   |= (1 << 6);
+
+			/* PWM speaker timer initialization */
+			TCCR3A  = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)); // Set on match, clear on TOP
+			TCCR3B  = ((1 << WGM32) | (1 << CS30));  // Fast 8-Bit PWM, F_CPU speed
+			
+			puts_P(PSTR("Microphone Enumerated.\r\n"));
+
+			USB_HostState = HOST_STATE_Configured;
+			break;
+		case HOST_STATE_Configured:
+			/* Do nothing - audio stream is handled by the timer interrupt routine */
+			break;
+	}
+}
+
+/** ISR to handle the reloading of the PWM timer with the next sample. */
+ISR(TIMER0_COMPA_vect, ISR_BLOCK)
+{
+	uint8_t PrevPipe = Pipe_GetCurrentPipe();
+
+	Pipe_SelectPipe(AUDIO_DATA_IN_PIPE);
+	Pipe_Unfreeze();
+
+	/* Check if the current pipe can be read from (contains a packet) and the device is sending data */
+	if (Pipe_IsINReceived())
+	{
+		/* Retrieve the signed 16-bit audio sample, convert to 8-bit */
+		int8_t Sample_8Bit = (Pipe_Read_16_LE() >> 8);
+
+		/* Check to see if the bank is now empty */
+		if (!(Pipe_IsReadWriteAllowed()))
+		{
+			/* Acknowledge the packet, clear the bank ready for the next packet */
+			Pipe_ClearIN();
+		}
+
+		/* Load the sample into the PWM timer channel */
+		OCR3A = (Sample_8Bit ^ (1 << 7));
+
+		uint8_t LEDMask = LEDS_NO_LEDS;
+
+		/* Turn on LEDs as the sample amplitude increases */
+		if (Sample_8Bit > 16)
+		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4);
+		else if (Sample_8Bit > 8)
+		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3);
+		else if (Sample_8Bit > 4)
+		  LEDMask = (LEDS_LED1 | LEDS_LED2);
+		else if (Sample_8Bit > 2)
+		  LEDMask = (LEDS_LED1);
+
+		LEDs_SetAllLEDs(LEDMask);
+	}
+	
+	Pipe_Freeze();
+	Pipe_SelectPipe(PrevPipe);
+}
diff --git a/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.h b/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.h
index e3952329d..f60f48ff8 100644
--- a/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.h
+++ b/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.h
@@ -1,80 +1,80 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header file for AudioInputHost.c.

- */

-

-#ifndef _AUDIO_INPUT_HOST_H_

-#define _AUDIO_INPUT_HOST_H_

-

-	/* Includes: */

-		#include <avr/io.h>

-		#include <avr/wdt.h>

-		#include <avr/pgmspace.h>

-		#include <avr/power.h>

-		#include <avr/interrupt.h>

-		#include <stdio.h>

-

-		#include <LUFA/Version.h>

-		#include <LUFA/Drivers/Misc/TerminalCodes.h>

-		#include <LUFA/Drivers/USB/USB.h>

-		#include <LUFA/Drivers/Peripheral/Serial.h>

-		#include <LUFA/Drivers/Board/LEDs.h>

-

-		#include "ConfigDescriptor.h"

-

-	/* Macros: */

-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

-		#define LEDMASK_USB_NOTREADY      LEDS_LED1

-

-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */

-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)

-

-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */

-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)

-

-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */

-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)

-

-	/* Function Prototypes: */

-		void Audio_Task(void);

-		void SetupHardware(void);

-

-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);

-		void EVENT_USB_Host_DeviceAttached(void);

-		void EVENT_USB_Host_DeviceUnattached(void);

-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,

-		                                            const uint8_t SubErrorCode);

-		void EVENT_USB_Host_DeviceEnumerationComplete(void);

-

-#endif

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for AudioInputHost.c.
+ */
+
+#ifndef _AUDIO_INPUT_HOST_H_
+#define _AUDIO_INPUT_HOST_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/pgmspace.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdio.h>
+
+		#include <LUFA/Version.h>
+		#include <LUFA/Drivers/Misc/TerminalCodes.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Peripheral/Serial.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+
+		#include "ConfigDescriptor.h"
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void Audio_Task(void);
+		void SetupHardware(void);
+
+		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
+		void EVENT_USB_Host_DeviceAttached(void);
+		void EVENT_USB_Host_DeviceUnattached(void);
+		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
+		                                            const uint8_t SubErrorCode);
+		void EVENT_USB_Host_DeviceEnumerationComplete(void);
+
+#endif
+
diff --git a/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.txt b/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.txt
index 329448af0..11a424271 100644
--- a/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.txt
+++ b/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.txt
@@ -1,66 +1,66 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \mainpage Audio Input Host Demo

- *

- *  \section Sec_Compat Demo Compatibility:

- *

- *  The following list indicates what microcontrollers are compatible with this demo.

- *

- *  - Series 7 USB AVRs (AT90USBxxx7)

- *

- *  \section Sec_Info USB Information:

- *

- *  The following table gives a rundown of the USB utilization of this demo.

- *

- *  <table>

- *   <tr>

- *    <td><b>USB Mode:</b></td>

- *    <td>Host</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Class:</b></td>

- *    <td>Audio Class</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Subclass:</b></td>

- *    <td>Standard Audio Device</td>

- *   </tr>

- *   <tr>

- *    <td><b>Relevant Standards:</b></td>

- *    <td>USBIF Audio 1.0 Class Specification \n

- *        USBIF Audio 1.0 Class Terminal Types Specification \n

- *        USBIF Audio 1.0 Data Formats Specification</td>

- *   </tr>

- *   <tr>

- *    <td><b>Usable Speeds:</b></td>

- *    <td>Full Speed Mode</td>

- *   </tr>

- *  </table>

- *

- *  \section Sec_Description Project Description:

- *

- *  Audio Input host demonstration application. This gives a simple reference

- *  application for implementing a USB Audio host, for USB Audio devices using

- *  the USB Audio 1.0 class profile.

- *

- *  Incoming audio will output in 8-bit PWM onto the timer 3 output compare

- *  channel A, and will also be indicated on the board LEDs. Decouple the PWM

- *  output with a capacitor and attach to a speaker to hear the audio.

- *

- *  \section Sec_Options Project Options

- *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

- *

- *  <table>

- *   <tr>

- *    <td>

- *     None

- *    </td>

- *   </tr>

- *  </table>

- */

-

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Audio Input Host Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  - Series 7 USB AVRs (AT90USBxxx7)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Host</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Audio Class</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Standard Audio Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Audio 1.0 Class Specification \n
+ *        USBIF Audio 1.0 Class Terminal Types Specification \n
+ *        USBIF Audio 1.0 Data Formats Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Usable Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Audio Input host demonstration application. This gives a simple reference
+ *  application for implementing a USB Audio host, for USB Audio devices using
+ *  the USB Audio 1.0 class profile.
+ *
+ *  Incoming audio will output in 8-bit PWM onto the timer 3 output compare
+ *  channel A, and will also be indicated on the board LEDs. Decouple the PWM
+ *  output with a capacitor and attach to a speaker to hear the audio.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c
index 0ce054f34..47cdcfb9c 100644
--- a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c
@@ -1,220 +1,220 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations

- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures

- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.

- */

-

-#include "ConfigDescriptor.h"

-

-/** Index of the currently used Audio Streaming Interface within the device. */

-uint8_t StreamingInterfaceIndex      = 0;

-

-/** Alternative Setting of the currently used Audio Streaming Interface within the device. */

-uint8_t StreamingInterfaceAltSetting = 0;

-

-/** Address of the streaming audio endpoint currently in use within the device. */

-uint8_t StreamingEndpointAddress     = 0;

-

-

-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This

- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate

- *  with compatible devices.

- *

- *  This routine searches for a Streaming Audio interface descriptor containing a valid Isochronous audio endpoint.

- *

- *  \return An error code from the \ref AudioHost_GetConfigDescriptorDataCodes_t enum.

- */

-uint8_t ProcessConfigurationDescriptor(void)

-{

-	uint8_t  ConfigDescriptorData[512];

-	void*    CurrConfigLocation = ConfigDescriptorData;

-	uint16_t CurrConfigBytesRem;

-

-	USB_Descriptor_Interface_t* AudioControlInterface   = NULL;

-	USB_Descriptor_Interface_t* AudioStreamingInterface = NULL;

-	USB_Descriptor_Endpoint_t*  DataINEndpoint          = NULL;

-

-	/* Retrieve the entire configuration descriptor into the allocated buffer */

-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))

-	{

-		case HOST_GETCONFIG_Successful:

-			break;

-		case HOST_GETCONFIG_InvalidData:

-			return InvalidConfigDataReturned;

-		case HOST_GETCONFIG_BuffOverflow:

-			return DescriptorTooLarge;

-		default:

-			return ControlError;

-	}

-

-	while (!(DataINEndpoint))

-	{

-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */

-		if (!(AudioControlInterface) ||

-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,

-		                              DComp_NextAudioInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)

-		{

-			/* Check if we haven't found an Audio Control interface yet, or if we have run out of related Audio Streaming interfaces */

-			if (!(AudioControlInterface) ||

-			    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,

-			                              DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)

-			{

-				/* Find a new Audio Control interface if the current one doesn't contain a compatible streaming interface */

-				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,

-				                              DComp_NextAudioControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)

-				{

-					/* Descriptor not found, error out */

-					return NoCompatibleInterfaceFound;

-				}

-

-				/* Save the interface in case we need to refer back to it later */

-				AudioControlInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);			

-

-				/* Find the next Audio Streaming interface within that Audio Control interface */

-				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,

-				                              DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)

-				{

-					/* Descriptor not found, error out */

-					return NoCompatibleInterfaceFound;

-				}

-			}

-

-			/* Save the interface in case we need to refer back to it later */

-			AudioStreamingInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);

-

-			/* Skip the remainder of the loop as we have not found an endpoint yet */

-			continue;

-		}

-

-		/* Retrieve the endpoint address from the endpoint descriptor */

-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);

-

-		/* Save the endpoint if it is an IN type endpoint */

-		if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)

-		  DataINEndpoint = EndpointData;

-	}

-

-	StreamingInterfaceIndex      = AudioStreamingInterface->InterfaceNumber;

-	StreamingInterfaceAltSetting = AudioStreamingInterface->AlternateSetting;

-	StreamingEndpointAddress     = DataINEndpoint->EndpointAddress;

-

-	/* Configure the Audio data IN pipe */

-	Pipe_ConfigurePipe(AUDIO_DATA_IN_PIPE, EP_TYPE_ISOCHRONOUS, PIPE_TOKEN_IN,

-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_DOUBLE);

-

-	/* Valid data found, return success */

-	return SuccessfulConfigRead;

-}

-

-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's

- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration

- *  descriptor processing if an incompatible descriptor configuration is found.

- *

- *  This comparator searches for the next Interface descriptor of the correct Audio Control Class, Subclass and Protocol values.

- *

- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum

- */

-uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor)

-{

-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);

-

-	if (Header->Type == DTYPE_Interface)

-	{

-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);

-

-		if ((Interface->Class    == AUDIO_CSCP_AudioClass) &&

-		    (Interface->SubClass == AUDIO_CSCP_ControlSubclass) &&

-		    (Interface->Protocol == AUDIO_CSCP_ControlProtocol))

-		{

-			return DESCRIPTOR_SEARCH_Found;

-		}

-	}

-

-	return DESCRIPTOR_SEARCH_NotFound;

-}

-

-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's

- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration

- *  descriptor processing if an incompatible descriptor configuration is found.

- *

- *  This comparator searches for the next Interface descriptor of the correct Audio Streaming Class, Subclass and Protocol values.

- *

- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum

- */

-uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor)

-{

-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);

-

-	if (Header->Type == DTYPE_Interface)

-	{

-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);

-

-		if ((Interface->Class    == AUDIO_CSCP_AudioClass) &&

-		    (Interface->SubClass == AUDIO_CSCP_AudioStreamingSubclass) &&

-		    (Interface->Protocol == AUDIO_CSCP_StreamingProtocol))

-		{

-			return DESCRIPTOR_SEARCH_Found;

-		}

-	}

-

-	return DESCRIPTOR_SEARCH_NotFound;

-}

-

-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's

- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration

- *  descriptor processing if an incompatible descriptor configuration is found.

- *

- *  This comparator searches for the next Isochronous Endpoint descriptor within the current interface, aborting the

- *  search if another interface descriptor is found before the next endpoint.

- *

- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum

- */

-uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor)

-{

-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);

-

-	if (Header->Type == DTYPE_Endpoint)

-	{

-		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);

-

-		if ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_ISOCHRONOUS)

-		  return DESCRIPTOR_SEARCH_Found;

-	}

-	else if (Header->Type == DTYPE_Interface)

-	{

-		return DESCRIPTOR_SEARCH_Fail;

-	}

-

-	return DESCRIPTOR_SEARCH_NotFound;

-}

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
+ *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
+ *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
+ */
+
+#include "ConfigDescriptor.h"
+
+/** Index of the currently used Audio Streaming Interface within the device. */
+uint8_t StreamingInterfaceIndex      = 0;
+
+/** Alternative Setting of the currently used Audio Streaming Interface within the device. */
+uint8_t StreamingInterfaceAltSetting = 0;
+
+/** Address of the streaming audio endpoint currently in use within the device. */
+uint8_t StreamingEndpointAddress     = 0;
+
+
+/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
+ *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
+ *  with compatible devices.
+ *
+ *  This routine searches for a Streaming Audio interface descriptor containing a valid Isochronous audio endpoint.
+ *
+ *  \return An error code from the \ref AudioHost_GetConfigDescriptorDataCodes_t enum.
+ */
+uint8_t ProcessConfigurationDescriptor(void)
+{
+	uint8_t  ConfigDescriptorData[512];
+	void*    CurrConfigLocation = ConfigDescriptorData;
+	uint16_t CurrConfigBytesRem;
+
+	USB_Descriptor_Interface_t* AudioControlInterface   = NULL;
+	USB_Descriptor_Interface_t* AudioStreamingInterface = NULL;
+	USB_Descriptor_Endpoint_t*  DataINEndpoint          = NULL;
+
+	/* Retrieve the entire configuration descriptor into the allocated buffer */
+	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
+	{
+		case HOST_GETCONFIG_Successful:
+			break;
+		case HOST_GETCONFIG_InvalidData:
+			return InvalidConfigDataReturned;
+		case HOST_GETCONFIG_BuffOverflow:
+			return DescriptorTooLarge;
+		default:
+			return ControlError;
+	}
+
+	while (!(DataINEndpoint))
+	{
+		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
+		if (!(AudioControlInterface) ||
+		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
+		                              DComp_NextAudioInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
+		{
+			/* Check if we haven't found an Audio Control interface yet, or if we have run out of related Audio Streaming interfaces */
+			if (!(AudioControlInterface) ||
+			    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
+			                              DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)
+			{
+				/* Find a new Audio Control interface if the current one doesn't contain a compatible streaming interface */
+				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
+				                              DComp_NextAudioControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
+				{
+					/* Descriptor not found, error out */
+					return NoCompatibleInterfaceFound;
+				}
+
+				/* Save the interface in case we need to refer back to it later */
+				AudioControlInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);			
+
+				/* Find the next Audio Streaming interface within that Audio Control interface */
+				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
+				                              DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)
+				{
+					/* Descriptor not found, error out */
+					return NoCompatibleInterfaceFound;
+				}
+			}
+
+			/* Save the interface in case we need to refer back to it later */
+			AudioStreamingInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
+
+			/* Skip the remainder of the loop as we have not found an endpoint yet */
+			continue;
+		}
+
+		/* Retrieve the endpoint address from the endpoint descriptor */
+		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
+
+		/* Save the endpoint if it is an IN type endpoint */
+		if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)
+		  DataINEndpoint = EndpointData;
+	}
+
+	StreamingInterfaceIndex      = AudioStreamingInterface->InterfaceNumber;
+	StreamingInterfaceAltSetting = AudioStreamingInterface->AlternateSetting;
+	StreamingEndpointAddress     = DataINEndpoint->EndpointAddress;
+
+	/* Configure the Audio data IN pipe */
+	Pipe_ConfigurePipe(AUDIO_DATA_IN_PIPE, EP_TYPE_ISOCHRONOUS, PIPE_TOKEN_IN,
+	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_DOUBLE);
+
+	/* Valid data found, return success */
+	return SuccessfulConfigRead;
+}
+
+/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
+ *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
+ *  descriptor processing if an incompatible descriptor configuration is found.
+ *
+ *  This comparator searches for the next Interface descriptor of the correct Audio Control Class, Subclass and Protocol values.
+ *
+ *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
+ */
+uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor)
+{
+	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
+
+	if (Header->Type == DTYPE_Interface)
+	{
+		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
+
+		if ((Interface->Class    == AUDIO_CSCP_AudioClass) &&
+		    (Interface->SubClass == AUDIO_CSCP_ControlSubclass) &&
+		    (Interface->Protocol == AUDIO_CSCP_ControlProtocol))
+		{
+			return DESCRIPTOR_SEARCH_Found;
+		}
+	}
+
+	return DESCRIPTOR_SEARCH_NotFound;
+}
+
+/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
+ *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
+ *  descriptor processing if an incompatible descriptor configuration is found.
+ *
+ *  This comparator searches for the next Interface descriptor of the correct Audio Streaming Class, Subclass and Protocol values.
+ *
+ *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
+ */
+uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor)
+{
+	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
+
+	if (Header->Type == DTYPE_Interface)
+	{
+		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
+
+		if ((Interface->Class    == AUDIO_CSCP_AudioClass) &&
+		    (Interface->SubClass == AUDIO_CSCP_AudioStreamingSubclass) &&
+		    (Interface->Protocol == AUDIO_CSCP_StreamingProtocol))
+		{
+			return DESCRIPTOR_SEARCH_Found;
+		}
+	}
+
+	return DESCRIPTOR_SEARCH_NotFound;
+}
+
+/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
+ *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
+ *  descriptor processing if an incompatible descriptor configuration is found.
+ *
+ *  This comparator searches for the next Isochronous Endpoint descriptor within the current interface, aborting the
+ *  search if another interface descriptor is found before the next endpoint.
+ *
+ *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
+ */
+uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor)
+{
+	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
+
+	if (Header->Type == DTYPE_Endpoint)
+	{
+		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
+
+		if ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_ISOCHRONOUS)
+		  return DESCRIPTOR_SEARCH_Found;
+	}
+	else if (Header->Type == DTYPE_Interface)
+	{
+		return DESCRIPTOR_SEARCH_Fail;
+	}
+
+	return DESCRIPTOR_SEARCH_NotFound;
+}
diff --git a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h
index c2a845e4d..30e3605eb 100644
--- a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h
@@ -1,72 +1,72 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header file for ConfigDescriptor.c.

- */

-

-#ifndef _CONFIGDESCRIPTOR_H_

-#define _CONFIGDESCRIPTOR_H_

-

-	/* Includes: */

-		#include <LUFA/Drivers/USB/USB.h>

-

-		#include "AudioInputHost.h"

-

-	/* Macros: */

-		/** Pipe number for the Audio data IN pipe. */

-		#define AUDIO_DATA_IN_PIPE          1

-

-	/* Enums: */

-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */

-		enum AudioHost_GetConfigDescriptorDataCodes_t

-		{

-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */

-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */

-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */

-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */

-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */

-		};

-

-	/* External Variables: */

-		extern uint8_t StreamingInterfaceIndex;

-		extern uint8_t StreamingInterfaceAltSetting;

-		extern uint8_t StreamingEndpointAddress;

-

-	/* Function Prototypes: */

-		uint8_t ProcessConfigurationDescriptor(void);

-

-		uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor);

-		uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor);

-		uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor);

-

-#endif

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for ConfigDescriptor.c.
+ */
+
+#ifndef _CONFIGDESCRIPTOR_H_
+#define _CONFIGDESCRIPTOR_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include "AudioInputHost.h"
+
+	/* Macros: */
+		/** Pipe number for the Audio data IN pipe. */
+		#define AUDIO_DATA_IN_PIPE          1
+
+	/* Enums: */
+		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
+		enum AudioHost_GetConfigDescriptorDataCodes_t
+		{
+			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
+			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
+			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
+			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
+			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
+		};
+
+	/* External Variables: */
+		extern uint8_t StreamingInterfaceIndex;
+		extern uint8_t StreamingInterfaceAltSetting;
+		extern uint8_t StreamingEndpointAddress;
+
+	/* Function Prototypes: */
+		uint8_t ProcessConfigurationDescriptor(void);
+
+		uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor);
+		uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor);
+		uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor);
+
+#endif
+
diff --git a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf
index 0a371cfef..d0d1c2cb9 100644
--- a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf
+++ b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf
@@ -1,1565 +1,1565 @@
-# Doxyfile 1.6.2

-

-# This file describes the settings to be used by the documentation system

-# doxygen (www.doxygen.org) for a project

-#

-# All text after a hash (#) is considered a comment and will be ignored

-# The format is:

-#       TAG = value [value, ...]

-# For lists items can also be appended using:

-#       TAG += value [value, ...]

-# Values that contain spaces should be placed between quotes (" ")

-

-#---------------------------------------------------------------------------

-# Project related configuration options

-#---------------------------------------------------------------------------

-

-# This tag specifies the encoding used for all characters in the config file

-# that follow. The default is UTF-8 which is also the encoding used for all

-# text before the first occurrence of this tag. Doxygen uses libiconv (or the

-# iconv built into libc) for the transcoding. See

-# http://www.gnu.org/software/libiconv for the list of possible encodings.

-

-DOXYFILE_ENCODING      = UTF-8

-

-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded

-# by quotes) that should identify the project.

-

-PROJECT_NAME           = "LUFA Library - Audio Input Host"

-

-# The PROJECT_NUMBER tag can be used to enter a project or revision number.

-# This could be handy for archiving the generated documentation or

-# if some version control system is used.

-

-PROJECT_NUMBER         = 0.0.0

-

-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)

-# base path where the generated documentation will be put.

-# If a relative path is entered, it will be relative to the location

-# where doxygen was started. If left blank the current directory will be used.

-

-OUTPUT_DIRECTORY       = ./Documentation/

-

-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create

-# 4096 sub-directories (in 2 levels) under the output directory of each output

-# format and will distribute the generated files over these directories.

-# Enabling this option can be useful when feeding doxygen a huge amount of

-# source files, where putting all generated files in the same directory would

-# otherwise cause performance problems for the file system.

-

-CREATE_SUBDIRS         = NO

-

-# The OUTPUT_LANGUAGE tag is used to specify the language in which all

-# documentation generated by doxygen is written. Doxygen will use this

-# information to generate all constant output in the proper language.

-# The default language is English, other supported languages are:

-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,

-# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,

-# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English

-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,

-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,

-# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.

-

-OUTPUT_LANGUAGE        = English

-

-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will

-# include brief member descriptions after the members that are listed in

-# the file and class documentation (similar to JavaDoc).

-# Set to NO to disable this.

-

-BRIEF_MEMBER_DESC      = YES

-

-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend

-# the brief description of a member or function before the detailed description.

-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the

-# brief descriptions will be completely suppressed.

-

-REPEAT_BRIEF           = YES

-

-# This tag implements a quasi-intelligent brief description abbreviator

-# that is used to form the text in various listings. Each string

-# in this list, if found as the leading text of the brief description, will be

-# stripped from the text and the result after processing the whole list, is

-# used as the annotated text. Otherwise, the brief description is used as-is.

-# If left blank, the following values are used ("$name" is automatically

-# replaced with the name of the entity): "The $name class" "The $name widget"

-# "The $name file" "is" "provides" "specifies" "contains"

-# "represents" "a" "an" "the"

-

-ABBREVIATE_BRIEF       = "The $name class" \

-                         "The $name widget" \

-                         "The $name file" \

-                         is \

-                         provides \

-                         specifies \

-                         contains \

-                         represents \

-                         a \

-                         an \

-                         the

-

-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then

-# Doxygen will generate a detailed section even if there is only a brief

-# description.

-

-ALWAYS_DETAILED_SEC    = NO

-

-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all

-# inherited members of a class in the documentation of that class as if those

-# members were ordinary class members. Constructors, destructors and assignment

-# operators of the base classes will not be shown.

-

-INLINE_INHERITED_MEMB  = NO

-

-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full

-# path before files name in the file list and in the header files. If set

-# to NO the shortest path that makes the file name unique will be used.

-

-FULL_PATH_NAMES        = YES

-

-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag

-# can be used to strip a user-defined part of the path. Stripping is

-# only done if one of the specified strings matches the left-hand part of

-# the path. The tag can be used to show relative paths in the file list.

-# If left blank the directory from which doxygen is run is used as the

-# path to strip.

-

-STRIP_FROM_PATH        =

-

-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of

-# the path mentioned in the documentation of a class, which tells

-# the reader which header file to include in order to use a class.

-# If left blank only the name of the header file containing the class

-# definition is used. Otherwise one should specify the include paths that

-# are normally passed to the compiler using the -I flag.

-

-STRIP_FROM_INC_PATH    =

-

-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter

-# (but less readable) file names. This can be useful is your file systems

-# doesn't support long names like on DOS, Mac, or CD-ROM.

-

-SHORT_NAMES            = YES

-

-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen

-# will interpret the first line (until the first dot) of a JavaDoc-style

-# comment as the brief description. If set to NO, the JavaDoc

-# comments will behave just like regular Qt-style comments

-# (thus requiring an explicit @brief command for a brief description.)

-

-JAVADOC_AUTOBRIEF      = NO

-

-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will

-# interpret the first line (until the first dot) of a Qt-style

-# comment as the brief description. If set to NO, the comments

-# will behave just like regular Qt-style comments (thus requiring

-# an explicit \brief command for a brief description.)

-

-QT_AUTOBRIEF           = NO

-

-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen

-# treat a multi-line C++ special comment block (i.e. a block of //! or ///

-# comments) as a brief description. This used to be the default behaviour.

-# The new default is to treat a multi-line C++ comment block as a detailed

-# description. Set this tag to YES if you prefer the old behaviour instead.

-

-MULTILINE_CPP_IS_BRIEF = NO

-

-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented

-# member inherits the documentation from any documented member that it

-# re-implements.

-

-INHERIT_DOCS           = YES

-

-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce

-# a new page for each member. If set to NO, the documentation of a member will

-# be part of the file/class/namespace that contains it.

-

-SEPARATE_MEMBER_PAGES  = NO

-

-# The TAB_SIZE tag can be used to set the number of spaces in a tab.

-# Doxygen uses this value to replace tabs by spaces in code fragments.

-

-TAB_SIZE               = 4

-

-# This tag can be used to specify a number of aliases that acts

-# as commands in the documentation. An alias has the form "name=value".

-# For example adding "sideeffect=\par Side Effects:\n" will allow you to

-# put the command \sideeffect (or @sideeffect) in the documentation, which

-# will result in a user-defined paragraph with heading "Side Effects:".

-# You can put \n's in the value part of an alias to insert newlines.

-

-ALIASES                =

-

-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C

-# sources only. Doxygen will then generate output that is more tailored for C.

-# For instance, some of the names that are used will be different. The list

-# of all members will be omitted, etc.

-

-OPTIMIZE_OUTPUT_FOR_C  = YES

-

-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java

-# sources only. Doxygen will then generate output that is more tailored for

-# Java. For instance, namespaces will be presented as packages, qualified

-# scopes will look different, etc.

-

-OPTIMIZE_OUTPUT_JAVA   = NO

-

-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran

-# sources only. Doxygen will then generate output that is more tailored for

-# Fortran.

-

-OPTIMIZE_FOR_FORTRAN   = NO

-

-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL

-# sources. Doxygen will then generate output that is tailored for

-# VHDL.

-

-OPTIMIZE_OUTPUT_VHDL   = NO

-

-# Doxygen selects the parser to use depending on the extension of the files it parses.

-# With this tag you can assign which parser to use for a given extension.

-# Doxygen has a built-in mapping, but you can override or extend it using this tag.

-# The format is ext=language, where ext is a file extension, and language is one of

-# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,

-# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat

-# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),

-# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.

-

-EXTENSION_MAPPING      =

-

-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want

-# to include (a tag file for) the STL sources as input, then you should

-# set this tag to YES in order to let doxygen match functions declarations and

-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.

-# func(std::string) {}). This also make the inheritance and collaboration

-# diagrams that involve STL classes more complete and accurate.

-

-BUILTIN_STL_SUPPORT    = NO

-

-# If you use Microsoft's C++/CLI language, you should set this option to YES to

-# enable parsing support.

-

-CPP_CLI_SUPPORT        = NO

-

-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.

-# Doxygen will parse them like normal C++ but will assume all classes use public

-# instead of private inheritance when no explicit protection keyword is present.

-

-SIP_SUPPORT            = NO

-

-# For Microsoft's IDL there are propget and propput attributes to indicate getter

-# and setter methods for a property. Setting this option to YES (the default)

-# will make doxygen to replace the get and set methods by a property in the

-# documentation. This will only work if the methods are indeed getting or

-# setting a simple type. If this is not the case, or you want to show the

-# methods anyway, you should set this option to NO.

-

-IDL_PROPERTY_SUPPORT   = YES

-

-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC

-# tag is set to YES, then doxygen will reuse the documentation of the first

-# member in the group (if any) for the other members of the group. By default

-# all members of a group must be documented explicitly.

-

-DISTRIBUTE_GROUP_DOC   = NO

-

-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of

-# the same type (for instance a group of public functions) to be put as a

-# subgroup of that type (e.g. under the Public Functions section). Set it to

-# NO to prevent subgrouping. Alternatively, this can be done per class using

-# the \nosubgrouping command.

-

-SUBGROUPING            = YES

-

-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum

-# is documented as struct, union, or enum with the name of the typedef. So

-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct

-# with name TypeT. When disabled the typedef will appear as a member of a file,

-# namespace, or class. And the struct will be named TypeS. This can typically

-# be useful for C code in case the coding convention dictates that all compound

-# types are typedef'ed and only the typedef is referenced, never the tag name.

-

-TYPEDEF_HIDES_STRUCT   = NO

-

-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to

-# determine which symbols to keep in memory and which to flush to disk.

-# When the cache is full, less often used symbols will be written to disk.

-# For small to medium size projects (<1000 input files) the default value is

-# probably good enough. For larger projects a too small cache size can cause

-# doxygen to be busy swapping symbols to and from disk most of the time

-# causing a significant performance penality.

-# If the system has enough physical memory increasing the cache will improve the

-# performance by keeping more symbols in memory. Note that the value works on

-# a logarithmic scale so increasing the size by one will rougly double the

-# memory usage. The cache size is given by this formula:

-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,

-# corresponding to a cache size of 2^16 = 65536 symbols

-

-SYMBOL_CACHE_SIZE      = 0

-

-#---------------------------------------------------------------------------

-# Build related configuration options

-#---------------------------------------------------------------------------

-

-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in

-# documentation are documented, even if no documentation was available.

-# Private class members and static file members will be hidden unless

-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

-

-EXTRACT_ALL            = YES

-

-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class

-# will be included in the documentation.

-

-EXTRACT_PRIVATE        = YES

-

-# If the EXTRACT_STATIC tag is set to YES all static members of a file

-# will be included in the documentation.

-

-EXTRACT_STATIC         = YES

-

-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)

-# defined locally in source files will be included in the documentation.

-# If set to NO only classes defined in header files are included.

-

-EXTRACT_LOCAL_CLASSES  = YES

-

-# This flag is only useful for Objective-C code. When set to YES local

-# methods, which are defined in the implementation section but not in

-# the interface are included in the documentation.

-# If set to NO (the default) only methods in the interface are included.

-

-EXTRACT_LOCAL_METHODS  = NO

-

-# If this flag is set to YES, the members of anonymous namespaces will be

-# extracted and appear in the documentation as a namespace called

-# 'anonymous_namespace{file}', where file will be replaced with the base

-# name of the file that contains the anonymous namespace. By default

-# anonymous namespace are hidden.

-

-EXTRACT_ANON_NSPACES   = NO

-

-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all

-# undocumented members of documented classes, files or namespaces.

-# If set to NO (the default) these members will be included in the

-# various overviews, but no documentation section is generated.

-# This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_MEMBERS     = NO

-

-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all

-# undocumented classes that are normally visible in the class hierarchy.

-# If set to NO (the default) these classes will be included in the various

-# overviews. This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_CLASSES     = NO

-

-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all

-# friend (class|struct|union) declarations.

-# If set to NO (the default) these declarations will be included in the

-# documentation.

-

-HIDE_FRIEND_COMPOUNDS  = NO

-

-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any

-# documentation blocks found inside the body of a function.

-# If set to NO (the default) these blocks will be appended to the

-# function's detailed documentation block.

-

-HIDE_IN_BODY_DOCS      = NO

-

-# The INTERNAL_DOCS tag determines if documentation

-# that is typed after a \internal command is included. If the tag is set

-# to NO (the default) then the documentation will be excluded.

-# Set it to YES to include the internal documentation.

-

-INTERNAL_DOCS          = NO

-

-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate

-# file names in lower-case letters. If set to YES upper-case letters are also

-# allowed. This is useful if you have classes or files whose names only differ

-# in case and if your file system supports case sensitive file names. Windows

-# and Mac users are advised to set this option to NO.

-

-CASE_SENSE_NAMES       = NO

-

-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen

-# will show members with their full class and namespace scopes in the

-# documentation. If set to YES the scope will be hidden.

-

-HIDE_SCOPE_NAMES       = NO

-

-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen

-# will put a list of the files that are included by a file in the documentation

-# of that file.

-

-SHOW_INCLUDE_FILES     = YES

-

-# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen

-# will list include files with double quotes in the documentation

-# rather than with sharp brackets.

-

-FORCE_LOCAL_INCLUDES   = NO

-

-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]

-# is inserted in the documentation for inline members.

-

-INLINE_INFO            = YES

-

-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen

-# will sort the (detailed) documentation of file and class members

-# alphabetically by member name. If set to NO the members will appear in

-# declaration order.

-

-SORT_MEMBER_DOCS       = YES

-

-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the

-# brief documentation of file, namespace and class members alphabetically

-# by member name. If set to NO (the default) the members will appear in

-# declaration order.

-

-SORT_BRIEF_DOCS        = NO

-

-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.

-

-SORT_MEMBERS_CTORS_1ST = NO

-

-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the

-# hierarchy of group names into alphabetical order. If set to NO (the default)

-# the group names will appear in their defined order.

-

-SORT_GROUP_NAMES       = NO

-

-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be

-# sorted by fully-qualified names, including namespaces. If set to

-# NO (the default), the class list will be sorted only by class name,

-# not including the namespace part.

-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.

-# Note: This option applies only to the class list, not to the

-# alphabetical list.

-

-SORT_BY_SCOPE_NAME     = NO

-

-# The GENERATE_TODOLIST tag can be used to enable (YES) or

-# disable (NO) the todo list. This list is created by putting \todo

-# commands in the documentation.

-

-GENERATE_TODOLIST      = NO

-

-# The GENERATE_TESTLIST tag can be used to enable (YES) or

-# disable (NO) the test list. This list is created by putting \test

-# commands in the documentation.

-

-GENERATE_TESTLIST      = NO

-

-# The GENERATE_BUGLIST tag can be used to enable (YES) or

-# disable (NO) the bug list. This list is created by putting \bug

-# commands in the documentation.

-

-GENERATE_BUGLIST       = NO

-

-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or

-# disable (NO) the deprecated list. This list is created by putting

-# \deprecated commands in the documentation.

-

-GENERATE_DEPRECATEDLIST= YES

-

-# The ENABLED_SECTIONS tag can be used to enable conditional

-# documentation sections, marked by \if sectionname ... \endif.

-

-ENABLED_SECTIONS       =

-

-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines

-# the initial value of a variable or define consists of for it to appear in

-# the documentation. If the initializer consists of more lines than specified

-# here it will be hidden. Use a value of 0 to hide initializers completely.

-# The appearance of the initializer of individual variables and defines in the

-# documentation can be controlled using \showinitializer or \hideinitializer

-# command in the documentation regardless of this setting.

-

-MAX_INITIALIZER_LINES  = 30

-

-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated

-# at the bottom of the documentation of classes and structs. If set to YES the

-# list will mention the files that were used to generate the documentation.

-

-SHOW_USED_FILES        = YES

-

-# If the sources in your project are distributed over multiple directories

-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy

-# in the documentation. The default is NO.

-

-SHOW_DIRECTORIES       = YES

-

-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.

-# This will remove the Files entry from the Quick Index and from the

-# Folder Tree View (if specified). The default is YES.

-

-SHOW_FILES             = YES

-

-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the

-# Namespaces page.

-# This will remove the Namespaces entry from the Quick Index

-# and from the Folder Tree View (if specified). The default is YES.

-

-SHOW_NAMESPACES        = YES

-

-# The FILE_VERSION_FILTER tag can be used to specify a program or script that

-# doxygen should invoke to get the current version for each file (typically from

-# the version control system). Doxygen will invoke the program by executing (via

-# popen()) the command <command> <input-file>, where <command> is the value of

-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file

-# provided by doxygen. Whatever the program writes to standard output

-# is used as the file version. See the manual for examples.

-

-FILE_VERSION_FILTER    =

-

-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by

-# doxygen. The layout file controls the global structure of the generated output files

-# in an output format independent way. The create the layout file that represents

-# doxygen's defaults, run doxygen with the -l option. You can optionally specify a

-# file name after the option, if omitted DoxygenLayout.xml will be used as the name

-# of the layout file.

-

-LAYOUT_FILE            =

-

-#---------------------------------------------------------------------------

-# configuration options related to warning and progress messages

-#---------------------------------------------------------------------------

-

-# The QUIET tag can be used to turn on/off the messages that are generated

-# by doxygen. Possible values are YES and NO. If left blank NO is used.

-

-QUIET                  = YES

-

-# The WARNINGS tag can be used to turn on/off the warning messages that are

-# generated by doxygen. Possible values are YES and NO. If left blank

-# NO is used.

-

-WARNINGS               = YES

-

-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings

-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will

-# automatically be disabled.

-

-WARN_IF_UNDOCUMENTED   = YES

-

-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for

-# potential errors in the documentation, such as not documenting some

-# parameters in a documented function, or documenting parameters that

-# don't exist or using markup commands wrongly.

-

-WARN_IF_DOC_ERROR      = YES

-

-# This WARN_NO_PARAMDOC option can be abled to get warnings for

-# functions that are documented, but have no documentation for their parameters

-# or return value. If set to NO (the default) doxygen will only warn about

-# wrong or incomplete parameter documentation, but not about the absence of

-# documentation.

-

-WARN_NO_PARAMDOC       = YES

-

-# The WARN_FORMAT tag determines the format of the warning messages that

-# doxygen can produce. The string should contain the $file, $line, and $text

-# tags, which will be replaced by the file and line number from which the

-# warning originated and the warning text. Optionally the format may contain

-# $version, which will be replaced by the version of the file (if it could

-# be obtained via FILE_VERSION_FILTER)

-

-WARN_FORMAT            = "$file:$line: $text"

-

-# The WARN_LOGFILE tag can be used to specify a file to which warning

-# and error messages should be written. If left blank the output is written

-# to stderr.

-

-WARN_LOGFILE           =

-

-#---------------------------------------------------------------------------

-# configuration options related to the input files

-#---------------------------------------------------------------------------

-

-# The INPUT tag can be used to specify the files and/or directories that contain

-# documented source files. You may enter file names like "myfile.cpp" or

-# directories like "/usr/src/myproject". Separate the files or directories

-# with spaces.

-

-INPUT                  = ./

-

-# This tag can be used to specify the character encoding of the source files

-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is

-# also the default input encoding. Doxygen uses libiconv (or the iconv built

-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for

-# the list of possible encodings.

-

-INPUT_ENCODING         = UTF-8

-

-# If the value of the INPUT tag contains directories, you can use the

-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank the following patterns are tested:

-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx

-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90

-

-FILE_PATTERNS          = *.h \

-                         *.c \

-                         *.txt

-

-# The RECURSIVE tag can be used to turn specify whether or not subdirectories

-# should be searched for input files as well. Possible values are YES and NO.

-# If left blank NO is used.

-

-RECURSIVE              = YES

-

-# The EXCLUDE tag can be used to specify files and/or directories that should

-# excluded from the INPUT source files. This way you can easily exclude a

-# subdirectory from a directory tree whose root is specified with the INPUT tag.

-

-EXCLUDE                = Documentation/

-

-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or

-# directories that are symbolic links (a Unix filesystem feature) are excluded

-# from the input.

-

-EXCLUDE_SYMLINKS       = NO

-

-# If the value of the INPUT tag contains directories, you can use the

-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude

-# certain files from those directories. Note that the wildcards are matched

-# against the file with absolute path, so to exclude all test directories

-# for example use the pattern */test/*

-

-EXCLUDE_PATTERNS       = 

-

-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names

-# (namespaces, classes, functions, etc.) that should be excluded from the

-# output. The symbol name can be a fully qualified name, a word, or if the

-# wildcard * is used, a substring. Examples: ANamespace, AClass,

-# AClass::ANamespace, ANamespace::*Test

-

-EXCLUDE_SYMBOLS        = __* \

-                         INCLUDE_FROM_*

-

-# The EXAMPLE_PATH tag can be used to specify one or more files or

-# directories that contain example code fragments that are included (see

-# the \include command).

-

-EXAMPLE_PATH           =

-

-# If the value of the EXAMPLE_PATH tag contains directories, you can use the

-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank all files are included.

-

-EXAMPLE_PATTERNS       = *

-

-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be

-# searched for input files to be used with the \include or \dontinclude

-# commands irrespective of the value of the RECURSIVE tag.

-# Possible values are YES and NO. If left blank NO is used.

-

-EXAMPLE_RECURSIVE      = NO

-

-# The IMAGE_PATH tag can be used to specify one or more files or

-# directories that contain image that are included in the documentation (see

-# the \image command).

-

-IMAGE_PATH             =

-

-# The INPUT_FILTER tag can be used to specify a program that doxygen should

-# invoke to filter for each input file. Doxygen will invoke the filter program

-# by executing (via popen()) the command <filter> <input-file>, where <filter>

-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an

-# input file. Doxygen will then use the output that the filter program writes

-# to standard output.

-# If FILTER_PATTERNS is specified, this tag will be

-# ignored.

-

-INPUT_FILTER           =

-

-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern

-# basis.

-# Doxygen will compare the file name with each pattern and apply the

-# filter if there is a match.

-# The filters are a list of the form:

-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further

-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER

-# is applied to all files.

-

-FILTER_PATTERNS        =

-

-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using

-# INPUT_FILTER) will be used to filter the input files when producing source

-# files to browse (i.e. when SOURCE_BROWSER is set to YES).

-

-FILTER_SOURCE_FILES    = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to source browsing

-#---------------------------------------------------------------------------

-

-# If the SOURCE_BROWSER tag is set to YES then a list of source files will

-# be generated. Documented entities will be cross-referenced with these sources.

-# Note: To get rid of all source code in the generated output, make sure also

-# VERBATIM_HEADERS is set to NO.

-

-SOURCE_BROWSER         = NO

-

-# Setting the INLINE_SOURCES tag to YES will include the body

-# of functions and classes directly in the documentation.

-

-INLINE_SOURCES         = NO

-

-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct

-# doxygen to hide any special comment blocks from generated source code

-# fragments. Normal C and C++ comments will always remain visible.

-

-STRIP_CODE_COMMENTS    = YES

-

-# If the REFERENCED_BY_RELATION tag is set to YES

-# then for each documented function all documented

-# functions referencing it will be listed.

-

-REFERENCED_BY_RELATION = NO

-

-# If the REFERENCES_RELATION tag is set to YES

-# then for each documented function all documented entities

-# called/used by that function will be listed.

-

-REFERENCES_RELATION    = NO

-

-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)

-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from

-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will

-# link to the source code.

-# Otherwise they will link to the documentation.

-

-REFERENCES_LINK_SOURCE = NO

-

-# If the USE_HTAGS tag is set to YES then the references to source code

-# will point to the HTML generated by the htags(1) tool instead of doxygen

-# built-in source browser. The htags tool is part of GNU's global source

-# tagging system (see http://www.gnu.org/software/global/global.html). You

-# will need version 4.8.6 or higher.

-

-USE_HTAGS              = NO

-

-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen

-# will generate a verbatim copy of the header file for each class for

-# which an include is specified. Set to NO to disable this.

-

-VERBATIM_HEADERS       = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the alphabetical class index

-#---------------------------------------------------------------------------

-

-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index

-# of all compounds will be generated. Enable this if the project

-# contains a lot of classes, structs, unions or interfaces.

-

-ALPHABETICAL_INDEX     = YES

-

-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then

-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns

-# in which this list will be split (can be a number in the range [1..20])

-

-COLS_IN_ALPHA_INDEX    = 5

-

-# In case all classes in a project start with a common prefix, all

-# classes will be put under the same header in the alphabetical index.

-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that

-# should be ignored while generating the index headers.

-

-IGNORE_PREFIX          =

-

-#---------------------------------------------------------------------------

-# configuration options related to the HTML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will

-# generate HTML output.

-

-GENERATE_HTML          = YES

-

-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `html' will be used as the default path.

-

-HTML_OUTPUT            = html

-

-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for

-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank

-# doxygen will generate files with .html extension.

-

-HTML_FILE_EXTENSION    = .html

-

-# The HTML_HEADER tag can be used to specify a personal HTML header for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard header.

-

-HTML_HEADER            =

-

-# The HTML_FOOTER tag can be used to specify a personal HTML footer for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard footer.

-

-HTML_FOOTER            =

-

-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading

-# style sheet that is used by each HTML page. It can be used to

-# fine-tune the look of the HTML output. If the tag is left blank doxygen

-# will generate a default style sheet. Note that doxygen will try to copy

-# the style sheet file to the HTML output directory, so don't put your own

-# stylesheet in the HTML output directory as well, or it will be erased!

-

-HTML_STYLESHEET        =

-

-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML

-# page will contain the date and time when the page was generated. Setting

-# this to NO can help when comparing the output of multiple runs.

-

-HTML_TIMESTAMP         = NO

-

-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,

-# files or namespaces will be aligned in HTML using tables. If set to

-# NO a bullet list will be used.

-

-HTML_ALIGN_MEMBERS     = YES

-

-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML

-# documentation will contain sections that can be hidden and shown after the

-# page has loaded. For this to work a browser that supports

-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox

-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).

-

-HTML_DYNAMIC_SECTIONS  = YES

-

-# If the GENERATE_DOCSET tag is set to YES, additional index files

-# will be generated that can be used as input for Apple's Xcode 3

-# integrated development environment, introduced with OSX 10.5 (Leopard).

-# To create a documentation set, doxygen will generate a Makefile in the

-# HTML output directory. Running make will produce the docset in that

-# directory and running "make install" will install the docset in

-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find

-# it at startup.

-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.

-

-GENERATE_DOCSET        = NO

-

-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the

-# feed. A documentation feed provides an umbrella under which multiple

-# documentation sets from a single provider (such as a company or product suite)

-# can be grouped.

-

-DOCSET_FEEDNAME        = "Doxygen generated docs"

-

-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that

-# should uniquely identify the documentation set bundle. This should be a

-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen

-# will append .docset to the name.

-

-DOCSET_BUNDLE_ID       = org.doxygen.Project

-

-# If the GENERATE_HTMLHELP tag is set to YES, additional index files

-# will be generated that can be used as input for tools like the

-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)

-# of the generated HTML documentation.

-

-GENERATE_HTMLHELP      = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can

-# be used to specify the file name of the resulting .chm file. You

-# can add a path in front of the file if the result should not be

-# written to the html output directory.

-

-CHM_FILE               =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can

-# be used to specify the location (absolute path including file name) of

-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run

-# the HTML help compiler on the generated index.hhp.

-

-HHC_LOCATION           =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag

-# controls if a separate .chi index file is generated (YES) or that

-# it should be included in the master .chm file (NO).

-

-GENERATE_CHI           = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING

-# is used to encode HtmlHelp index (hhk), content (hhc) and project file

-# content.

-

-CHM_INDEX_ENCODING     =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag

-# controls whether a binary table of contents is generated (YES) or a

-# normal table of contents (NO) in the .chm file.

-

-BINARY_TOC             = NO

-

-# The TOC_EXPAND flag can be set to YES to add extra items for group members

-# to the contents of the HTML help documentation and to the tree view.

-

-TOC_EXPAND             = YES

-

-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER

-# are set, an additional index file will be generated that can be used as input for

-# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated

-# HTML documentation.

-

-GENERATE_QHP           = NO

-

-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can

-# be used to specify the file name of the resulting .qch file.

-# The path specified is relative to the HTML output folder.

-

-QCH_FILE               =

-

-# The QHP_NAMESPACE tag specifies the namespace to use when generating

-# Qt Help Project output. For more information please see

-# http://doc.trolltech.com/qthelpproject.html#namespace

-

-QHP_NAMESPACE          = org.doxygen.Project

-

-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating

-# Qt Help Project output. For more information please see

-# http://doc.trolltech.com/qthelpproject.html#virtual-folders

-

-QHP_VIRTUAL_FOLDER     = doc

-

-# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.

-# For more information please see

-# http://doc.trolltech.com/qthelpproject.html#custom-filters

-

-QHP_CUST_FILTER_NAME   =

-

-# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see

-# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.

-

-QHP_CUST_FILTER_ATTRS  =

-

-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's

-# filter section matches.

-# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.

-

-QHP_SECT_FILTER_ATTRS  =

-

-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can

-# be used to specify the location of Qt's qhelpgenerator.

-# If non-empty doxygen will try to run qhelpgenerator on the generated

-# .qhp file.

-

-QHG_LOCATION           =

-

-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files

-#  will be generated, which together with the HTML files, form an Eclipse help

-#  plugin. To install this plugin and make it available under the help contents

-# menu in Eclipse, the contents of the directory containing the HTML and XML

-# files needs to be copied into the plugins directory of eclipse. The name of

-# the directory within the plugins directory should be the same as

-# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears.

-

-GENERATE_ECLIPSEHELP   = NO

-

-# A unique identifier for the eclipse help plugin. When installing the plugin

-# the directory name containing the HTML and XML files should also have

-# this name.

-

-ECLIPSE_DOC_ID         = org.doxygen.Project

-

-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at

-# top of each HTML page. The value NO (the default) enables the index and

-# the value YES disables it.

-

-DISABLE_INDEX          = NO

-

-# This tag can be used to set the number of enum values (range [1..20])

-# that doxygen will group on one line in the generated HTML documentation.

-

-ENUM_VALUES_PER_LINE   = 1

-

-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index

-# structure should be generated to display hierarchical information.

-# If the tag value is set to YES, a side panel will be generated

-# containing a tree-like index structure (just like the one that

-# is generated for HTML Help). For this to work a browser that supports

-# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).

-# Windows users are probably better off using the HTML help feature.

-

-GENERATE_TREEVIEW      = YES

-

-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,

-# and Class Hierarchy pages using a tree view instead of an ordered list.

-

-USE_INLINE_TREES       = NO

-

-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be

-# used to set the initial width (in pixels) of the frame in which the tree

-# is shown.

-

-TREEVIEW_WIDTH         = 250

-

-# Use this tag to change the font size of Latex formulas included

-# as images in the HTML documentation. The default is 10. Note that

-# when you change the font size after a successful doxygen run you need

-# to manually remove any form_*.png images from the HTML output directory

-# to force them to be regenerated.

-

-FORMULA_FONTSIZE       = 10

-

-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript

-# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should

-# typically be disabled. For large projects the javascript based search engine

-# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.

-

-SEARCHENGINE           = NO

-

-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index

-# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup

-# and does not have live searching capabilities.

-

-SERVER_BASED_SEARCH    = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the LaTeX output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will

-# generate Latex output.

-

-GENERATE_LATEX         = NO

-

-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `latex' will be used as the default path.

-

-LATEX_OUTPUT           = latex

-

-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be

-# invoked. If left blank `latex' will be used as the default command name.

-# Note that when enabling USE_PDFLATEX this option is only used for

-# generating bitmaps for formulas in the HTML output, but not in the

-# Makefile that is written to the output directory.

-

-LATEX_CMD_NAME         = latex

-

-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to

-# generate index for LaTeX. If left blank `makeindex' will be used as the

-# default command name.

-

-MAKEINDEX_CMD_NAME     = makeindex

-

-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact

-# LaTeX documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_LATEX          = NO

-

-# The PAPER_TYPE tag can be used to set the paper type that is used

-# by the printer. Possible values are: a4, a4wide, letter, legal and

-# executive. If left blank a4wide will be used.

-

-PAPER_TYPE             = a4wide

-

-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX

-# packages that should be included in the LaTeX output.

-

-EXTRA_PACKAGES         =

-

-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for

-# the generated latex document. The header should contain everything until

-# the first chapter. If it is left blank doxygen will generate a

-# standard header. Notice: only use this tag if you know what you are doing!

-

-LATEX_HEADER           =

-

-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated

-# is prepared for conversion to pdf (using ps2pdf). The pdf file will

-# contain links (just like the HTML output) instead of page references

-# This makes the output suitable for online browsing using a pdf viewer.

-

-PDF_HYPERLINKS         = YES

-

-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of

-# plain latex in the generated Makefile. Set this option to YES to get a

-# higher quality PDF documentation.

-

-USE_PDFLATEX           = YES

-

-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.

-# command to the generated LaTeX files. This will instruct LaTeX to keep

-# running if errors occur, instead of asking the user for help.

-# This option is also used when generating formulas in HTML.

-

-LATEX_BATCHMODE        = NO

-

-# If LATEX_HIDE_INDICES is set to YES then doxygen will not

-# include the index chapters (such as File Index, Compound Index, etc.)

-# in the output.

-

-LATEX_HIDE_INDICES     = NO

-

-# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.

-

-LATEX_SOURCE_CODE      = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the RTF output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output

-# The RTF output is optimized for Word 97 and may not look very pretty with

-# other RTF readers or editors.

-

-GENERATE_RTF           = NO

-

-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `rtf' will be used as the default path.

-

-RTF_OUTPUT             = rtf

-

-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact

-# RTF documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_RTF            = NO

-

-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated

-# will contain hyperlink fields. The RTF file will

-# contain links (just like the HTML output) instead of page references.

-# This makes the output suitable for online browsing using WORD or other

-# programs which support those fields.

-# Note: wordpad (write) and others do not support links.

-

-RTF_HYPERLINKS         = NO

-

-# Load stylesheet definitions from file. Syntax is similar to doxygen's

-# config file, i.e. a series of assignments. You only have to provide

-# replacements, missing definitions are set to their default value.

-

-RTF_STYLESHEET_FILE    =

-

-# Set optional variables used in the generation of an rtf document.

-# Syntax is similar to doxygen's config file.

-

-RTF_EXTENSIONS_FILE    =

-

-#---------------------------------------------------------------------------

-# configuration options related to the man page output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will

-# generate man pages

-

-GENERATE_MAN           = NO

-

-# The MAN_OUTPUT tag is used to specify where the man pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `man' will be used as the default path.

-

-MAN_OUTPUT             = man

-

-# The MAN_EXTENSION tag determines the extension that is added to

-# the generated man pages (default is the subroutine's section .3)

-

-MAN_EXTENSION          = .3

-

-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,

-# then it will generate one additional man file for each entity

-# documented in the real man page(s). These additional files

-# only source the real man page, but without them the man command

-# would be unable to find the correct page. The default is NO.

-

-MAN_LINKS              = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the XML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_XML tag is set to YES Doxygen will

-# generate an XML file that captures the structure of

-# the code including all documentation.

-

-GENERATE_XML           = NO

-

-# The XML_OUTPUT tag is used to specify where the XML pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `xml' will be used as the default path.

-

-XML_OUTPUT             = xml

-

-# The XML_SCHEMA tag can be used to specify an XML schema,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_SCHEMA             =

-

-# The XML_DTD tag can be used to specify an XML DTD,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_DTD                =

-

-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will

-# dump the program listings (including syntax highlighting

-# and cross-referencing information) to the XML output. Note that

-# enabling this will significantly increase the size of the XML output.

-

-XML_PROGRAMLISTING     = YES

-

-#---------------------------------------------------------------------------

-# configuration options for the AutoGen Definitions output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will

-# generate an AutoGen Definitions (see autogen.sf.net) file

-# that captures the structure of the code including all

-# documentation. Note that this feature is still experimental

-# and incomplete at the moment.

-

-GENERATE_AUTOGEN_DEF   = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the Perl module output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_PERLMOD tag is set to YES Doxygen will

-# generate a Perl module file that captures the structure of

-# the code including all documentation. Note that this

-# feature is still experimental and incomplete at the

-# moment.

-

-GENERATE_PERLMOD       = NO

-

-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate

-# the necessary Makefile rules, Perl scripts and LaTeX code to be able

-# to generate PDF and DVI output from the Perl module output.

-

-PERLMOD_LATEX          = NO

-

-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be

-# nicely formatted so it can be parsed by a human reader.

-# This is useful

-# if you want to understand what is going on.

-# On the other hand, if this

-# tag is set to NO the size of the Perl module output will be much smaller

-# and Perl will parse it just the same.

-

-PERLMOD_PRETTY         = YES

-

-# The names of the make variables in the generated doxyrules.make file

-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.

-# This is useful so different doxyrules.make files included by the same

-# Makefile don't overwrite each other's variables.

-

-PERLMOD_MAKEVAR_PREFIX =

-

-#---------------------------------------------------------------------------

-# Configuration options related to the preprocessor

-#---------------------------------------------------------------------------

-

-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will

-# evaluate all C-preprocessor directives found in the sources and include

-# files.

-

-ENABLE_PREPROCESSING   = YES

-

-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro

-# names in the source code. If set to NO (the default) only conditional

-# compilation will be performed. Macro expansion can be done in a controlled

-# way by setting EXPAND_ONLY_PREDEF to YES.

-

-MACRO_EXPANSION        = YES

-

-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES

-# then the macro expansion is limited to the macros specified with the

-# PREDEFINED and EXPAND_AS_DEFINED tags.

-

-EXPAND_ONLY_PREDEF     = YES

-

-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files

-# in the INCLUDE_PATH (see below) will be search if a #include is found.

-

-SEARCH_INCLUDES        = YES

-

-# The INCLUDE_PATH tag can be used to specify one or more directories that

-# contain include files that are not input files but should be processed by

-# the preprocessor.

-

-INCLUDE_PATH           =

-

-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard

-# patterns (like *.h and *.hpp) to filter out the header-files in the

-# directories. If left blank, the patterns specified with FILE_PATTERNS will

-# be used.

-

-INCLUDE_FILE_PATTERNS  =

-

-# The PREDEFINED tag can be used to specify one or more macro names that

-# are defined before the preprocessor is started (similar to the -D option of

-# gcc). The argument of the tag is a list of macros of the form: name

-# or name=definition (no spaces). If the definition and the = are

-# omitted =1 is assumed. To prevent a macro definition from being

-# undefined via #undef or recursively expanded use the := operator

-# instead of the = operator.

-

-PREDEFINED             = __DOXYGEN__ \

-                         PROGMEM

-

-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then

-# this tag can be used to specify a list of macro names that should be expanded.

-# The macro definition that is found in the sources will be used.

-# Use the PREDEFINED tag if you want to use a different macro definition.

-

-EXPAND_AS_DEFINED      = 

-

-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then

-# doxygen's preprocessor will remove all function-like macros that are alone

-# on a line, have an all uppercase name, and do not end with a semicolon. Such

-# function macros are typically used for boiler-plate code, and will confuse

-# the parser if not removed.

-

-SKIP_FUNCTION_MACROS   = YES

-

-#---------------------------------------------------------------------------

-# Configuration::additions related to external references

-#---------------------------------------------------------------------------

-

-# The TAGFILES option can be used to specify one or more tagfiles.

-# Optionally an initial location of the external documentation

-# can be added for each tagfile. The format of a tag file without

-# this location is as follows:

-#

-# TAGFILES = file1 file2 ...

-# Adding location for the tag files is done as follows:

-#

-# TAGFILES = file1=loc1 "file2 = loc2" ...

-# where "loc1" and "loc2" can be relative or absolute paths or

-# URLs. If a location is present for each tag, the installdox tool

-# does not have to be run to correct the links.

-# Note that each tag file must have a unique name

-# (where the name does NOT include the path)

-# If a tag file is not located in the directory in which doxygen

-# is run, you must also specify the path to the tagfile here.

-

-TAGFILES               =

-

-# When a file name is specified after GENERATE_TAGFILE, doxygen will create

-# a tag file that is based on the input files it reads.

-

-GENERATE_TAGFILE       =

-

-# If the ALLEXTERNALS tag is set to YES all external classes will be listed

-# in the class index. If set to NO only the inherited external classes

-# will be listed.

-

-ALLEXTERNALS           = NO

-

-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed

-# in the modules index. If set to NO, only the current project's groups will

-# be listed.

-

-EXTERNAL_GROUPS        = YES

-

-# The PERL_PATH should be the absolute path and name of the perl script

-# interpreter (i.e. the result of `which perl').

-

-PERL_PATH              = /usr/bin/perl

-

-#---------------------------------------------------------------------------

-# Configuration options related to the dot tool

-#---------------------------------------------------------------------------

-

-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will

-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base

-# or super classes. Setting the tag to NO turns the diagrams off. Note that

-# this option is superseded by the HAVE_DOT option below. This is only a

-# fallback. It is recommended to install and use dot, since it yields more

-# powerful graphs.

-

-CLASS_DIAGRAMS         = NO

-

-# You can define message sequence charts within doxygen comments using the \msc

-# command. Doxygen will then run the mscgen tool (see

-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the

-# documentation. The MSCGEN_PATH tag allows you to specify the directory where

-# the mscgen tool resides. If left empty the tool is assumed to be found in the

-# default search path.

-

-MSCGEN_PATH            =

-

-# If set to YES, the inheritance and collaboration graphs will hide

-# inheritance and usage relations if the target is undocumented

-# or is not a class.

-

-HIDE_UNDOC_RELATIONS   = YES

-

-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is

-# available from the path. This tool is part of Graphviz, a graph visualization

-# toolkit from AT&T and Lucent Bell Labs. The other options in this section

-# have no effect if this option is set to NO (the default)

-

-HAVE_DOT               = NO

-

-# By default doxygen will write a font called FreeSans.ttf to the output

-# directory and reference it in all dot files that doxygen generates. This

-# font does not include all possible unicode characters however, so when you need

-# these (or just want a differently looking font) you can specify the font name

-# using DOT_FONTNAME. You need need to make sure dot is able to find the font,

-# which can be done by putting it in a standard location or by setting the

-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory

-# containing the font.

-

-DOT_FONTNAME           = FreeSans

-

-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.

-# The default size is 10pt.

-

-DOT_FONTSIZE           = 10

-

-# By default doxygen will tell dot to use the output directory to look for the

-# FreeSans.ttf font (which doxygen will put there itself). If you specify a

-# different font using DOT_FONTNAME you can set the path where dot

-# can find it using this tag.

-

-DOT_FONTPATH           =

-

-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect inheritance relations. Setting this tag to YES will force the

-# the CLASS_DIAGRAMS tag to NO.

-

-CLASS_GRAPH            = NO

-

-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect implementation dependencies (inheritance, containment, and

-# class references variables) of the class with other documented classes.

-

-COLLABORATION_GRAPH    = NO

-

-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for groups, showing the direct groups dependencies

-

-GROUP_GRAPHS           = NO

-

-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and

-# collaboration diagrams in a style similar to the OMG's Unified Modeling

-# Language.

-

-UML_LOOK               = NO

-

-# If set to YES, the inheritance and collaboration graphs will show the

-# relations between templates and their instances.

-

-TEMPLATE_RELATIONS     = NO

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT

-# tags are set to YES then doxygen will generate a graph for each documented

-# file showing the direct and indirect include dependencies of the file with

-# other documented files.

-

-INCLUDE_GRAPH          = NO

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and

-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each

-# documented header file showing the documented files that directly or

-# indirectly include this file.

-

-INCLUDED_BY_GRAPH      = NO

-

-# If the CALL_GRAPH and HAVE_DOT options are set to YES then

-# doxygen will generate a call dependency graph for every global function

-# or class method. Note that enabling this option will significantly increase

-# the time of a run. So in most cases it will be better to enable call graphs

-# for selected functions only using the \callgraph command.

-

-CALL_GRAPH             = NO

-

-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then

-# doxygen will generate a caller dependency graph for every global function

-# or class method. Note that enabling this option will significantly increase

-# the time of a run. So in most cases it will be better to enable caller

-# graphs for selected functions only using the \callergraph command.

-

-CALLER_GRAPH           = NO

-

-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen

-# will graphical hierarchy of all classes instead of a textual one.

-

-GRAPHICAL_HIERARCHY    = NO

-

-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES

-# then doxygen will show the dependencies a directory has on other directories

-# in a graphical way. The dependency relations are determined by the #include

-# relations between the files in the directories.

-

-DIRECTORY_GRAPH        = NO

-

-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images

-# generated by dot. Possible values are png, jpg, or gif

-# If left blank png will be used.

-

-DOT_IMAGE_FORMAT       = png

-

-# The tag DOT_PATH can be used to specify the path where the dot tool can be

-# found. If left blank, it is assumed the dot tool can be found in the path.

-

-DOT_PATH               =

-

-# The DOTFILE_DIRS tag can be used to specify one or more directories that

-# contain dot files that are included in the documentation (see the

-# \dotfile command).

-

-DOTFILE_DIRS           =

-

-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of

-# nodes that will be shown in the graph. If the number of nodes in a graph

-# becomes larger than this value, doxygen will truncate the graph, which is

-# visualized by representing a node as a red box. Note that doxygen if the

-# number of direct children of the root node in a graph is already larger than

-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note

-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.

-

-DOT_GRAPH_MAX_NODES    = 15

-

-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the

-# graphs generated by dot. A depth value of 3 means that only nodes reachable

-# from the root by following a path via at most 3 edges will be shown. Nodes

-# that lay further from the root node will be omitted. Note that setting this

-# option to 1 or 2 may greatly reduce the computation time needed for large

-# code bases. Also note that the size of a graph can be further restricted by

-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.

-

-MAX_DOT_GRAPH_DEPTH    = 2

-

-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent

-# background. This is disabled by default, because dot on Windows does not

-# seem to support this out of the box. Warning: Depending on the platform used,

-# enabling this option may lead to badly anti-aliased labels on the edges of

-# a graph (i.e. they become hard to read).

-

-DOT_TRANSPARENT        = YES

-

-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output

-# files in one run (i.e. multiple -o and -T options on the command line). This

-# makes dot run faster, but since only newer versions of dot (>1.8.10)

-# support this, this feature is disabled by default.

-

-DOT_MULTI_TARGETS      = NO

-

-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will

-# generate a legend page explaining the meaning of the various boxes and

-# arrows in the dot generated graphs.

-

-GENERATE_LEGEND        = YES

-

-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will

-# remove the intermediate dot files that are used to generate

-# the various graphs.

-

-DOT_CLEANUP            = YES

+# Doxyfile 1.6.2
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "LUFA Library - Audio Input Host"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         = 0.0.0
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it parses.
+# With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this tag.
+# The format is ext=language, where ext is a file extension, and language is one of
+# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
+# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
+# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
+# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
+# doxygen. The layout file controls the global structure of the generated output files
+# in an output format independent way. The create the layout file that represents
+# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
+# file name after the option, if omitted DoxygenLayout.xml will be used as the name
+# of the layout file.
+
+LAYOUT_FILE            =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       = 
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = YES
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        =
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
+# are set, an additional index file will be generated that can be used as input for
+# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
+# HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
+# For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+#  plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = YES
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      = 
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = NO
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/Demos/Host/LowLevel/AudioInputHost/makefile b/Demos/Host/LowLevel/AudioInputHost/makefile
index 6febc161d..d7f30a683 100644
--- a/Demos/Host/LowLevel/AudioInputHost/makefile
+++ b/Demos/Host/LowLevel/AudioInputHost/makefile
@@ -1,714 +1,714 @@
-# Hey Emacs, this is a -*- makefile -*-

-#----------------------------------------------------------------------------

-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.

-#  >> Modified for use with the LUFA project. <<

-#

-# Released to the Public Domain

-#

-# Additional material for this makefile was written by:

-# Peter Fleury

-# Tim Henigan

-# Colin O'Flynn

-# Reiner Patommel

-# Markus Pfaff

-# Sander Pool

-# Frederik Rouleau

-# Carlos Lamas

-# Dean Camera

-# Opendous Inc.

-# Denver Gingerich

-#

-#----------------------------------------------------------------------------

-# On command line:

-#

-# make all = Make software.

-#

-# make clean = Clean out built project files.

-#

-# make coff = Convert ELF to AVR COFF.

-#

-# make extcoff = Convert ELF to AVR Extended COFF.

-#

-# make program = Download the hex file to the device, using avrdude.

-#                Please customize the avrdude settings below first!

-#

-# make dfu = Download the hex file to the device, using dfu-programmer (must

-#            have dfu-programmer installed).

-#

-# make flip = Download the hex file to the device, using Atmel FLIP (must

-#             have Atmel FLIP installed).

-#

-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

-#               (must have dfu-programmer installed).

-#

-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

-#                (must have Atmel FLIP installed).

-#

-# make doxygen = Generate DoxyGen documentation for the project (must have

-#                DoxyGen installed)

-#

-# make debug = Start either simulavr or avarice as specified for debugging,

-#              with avr-gdb or avr-insight as the front end for debugging.

-#

-# make filename.s = Just compile filename.c into the assembler code only.

-#

-# make filename.i = Create a preprocessed source file for use in submitting

-#                   bug reports to the GCC project.

-#

-# To rebuild project do "make clean" then "make all".

-#----------------------------------------------------------------------------

-

-

-# MCU name

-MCU = at90usb1287

-

-

-# Target architecture (see library "Board Types" documentation).

-ARCH = AVR8

-

-

-# Target board (see library "Board Types" documentation, NONE for projects not requiring

-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called

-# "Board" inside the application directory.

-BOARD = USBKEY

-

-

-# Processor frequency.

-#     This will define a symbol, F_CPU, in all source code files equal to the

-#     processor frequency in Hz. You can then use this symbol in your source code to

-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

-#     automatically to create a 32-bit value in your source code.

-#

-#     This will be an integer division of F_USB below, as it is sourced by

-#     F_USB after it has run through any CPU prescalers. Note that this value

-#     does not *change* the processor frequency - it should merely be updated to

-#     reflect the processor speed set externally so that the code can use accurate

-#     software delays.

-F_CPU = 8000000

-

-

-# Input clock frequency.

-#     This will define a symbol, F_USB, in all source code files equal to the

-#     input clock frequency (before any prescaling is performed) in Hz. This value may

-#     differ from F_CPU if prescaling is used on the latter, and is required as the

-#     raw input clock is fed directly to the PLL sections of the AVR for high speed

-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'

-#     at the end, this will be done automatically to create a 32-bit value in your

-#     source code.

-#

-#     If no clock division is performed on the input clock inside the AVR (via the

-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_USB = $(F_CPU)

-

-

-# Output format. (can be srec, ihex, binary)

-FORMAT = ihex

-

-

-# Target file name (without extension).

-TARGET = AudioInputHost

-

-

-# Object files directory

-#     To put object files in current directory, use a dot (.), do NOT make

-#     this an empty or blank macro!

-OBJDIR = .

-

-

-# Path to the LUFA library

-LUFA_PATH = ../../../..

-

-

-# LUFA library compile-time options and predefined tokens

-LUFA_OPTS  = -D USB_HOST_ONLY

-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"

-

-

-# Create the LUFA source path variables by including the LUFA root makefile

-include $(LUFA_PATH)/LUFA/makefile

-

-

-# List C source files here. (C dependencies are automatically generated.)

-SRC = $(TARGET).c                                                 \

-	  ConfigDescriptor.c                                          \

-	  $(LUFA_SRC_USB)                                             \

-	  $(LUFA_SRC_SERIAL)

-

-

-# List C++ source files here. (C dependencies are automatically generated.)

-CPPSRC =

-

-

-# List Assembler source files here.

-#     Make them always end in a capital .S.  Files ending in a lowercase .s

-#     will not be considered source files but generated files (assembler

-#     output from the compiler), and will be deleted upon "make clean"!

-#     Even though the DOS/Win* filesystem matches both .s and .S the same,

-#     it will preserve the spelling of the filenames, and gcc itself does

-#     care about how the name is spelled on its command-line.

-ASRC =

-

-

-# Optimization level, can be [0, 1, 2, 3, s].

-#     0 = turn off optimization. s = optimize for size.

-#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)

-OPT = s

-

-

-# Debugging format.

-#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.

-#     AVR Studio 4.10 requires dwarf-2.

-#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.

-DEBUG = dwarf-2

-

-

-# List any extra directories to look for include files here.

-#     Each directory must be seperated by a space.

-#     Use forward slashes for directory separators.

-#     For a directory that has spaces, enclose it in quotes.

-EXTRAINCDIRS = $(LUFA_PATH)/

-

-

-# Compiler flag to set the C Standard level.

-#     c89   = "ANSI" C

-#     gnu89 = c89 plus GCC extensions

-#     c99   = ISO C99 standard (not yet fully implemented)

-#     gnu99 = c99 plus GCC extensions

-CSTANDARD = -std=c99

-

-

-# Place -D or -U options here for C sources

-CDEFS  = -DF_CPU=$(F_CPU)UL

-CDEFS += -DF_USB=$(F_USB)UL

-CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)

-CDEFS += $(LUFA_OPTS)

-

-

-# Place -D or -U options here for ASM sources

-ADEFS  = -DF_CPU=$(F_CPU)

-ADEFS += -DF_USB=$(F_USB)UL

-ADEFS += -DBOARD=BOARD_$(BOARD)

-ADEFS += $(LUFA_OPTS)

-

-# Place -D or -U options here for C++ sources

-CPPDEFS  = -DF_CPU=$(F_CPU)UL

-CPPDEFS += -DF_USB=$(F_USB)UL

-CPPDEFS += -DBOARD=BOARD_$(BOARD)

-CPPDEFS += $(LUFA_OPTS)

-#CPPDEFS += -D__STDC_LIMIT_MACROS

-#CPPDEFS += -D__STDC_CONSTANT_MACROS

-

-

-

-#---------------- Compiler Options C ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CFLAGS = -g$(DEBUG)

-CFLAGS += $(CDEFS)

-CFLAGS += -O$(OPT)

-CFLAGS += -funsigned-char

-CFLAGS += -funsigned-bitfields

-CFLAGS += -ffunction-sections

-CFLAGS += -fno-inline-small-functions

-CFLAGS += -fpack-struct

-CFLAGS += -fshort-enums

-CFLAGS += -fno-strict-aliasing

-CFLAGS += -Wall

-CFLAGS += -Wstrict-prototypes

-#CFLAGS += -mshort-calls

-#CFLAGS += -fno-unit-at-a-time

-#CFLAGS += -Wundef

-#CFLAGS += -Wunreachable-code

-#CFLAGS += -Wsign-compare

-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-CFLAGS += $(CSTANDARD)

-

-

-#---------------- Compiler Options C++ ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CPPFLAGS = -g$(DEBUG)

-CPPFLAGS += $(CPPDEFS)

-CPPFLAGS += -O$(OPT)

-CPPFLAGS += -funsigned-char

-CPPFLAGS += -funsigned-bitfields

-CPPFLAGS += -fpack-struct

-CPPFLAGS += -fshort-enums

-CPPFLAGS += -fno-exceptions

-CPPFLAGS += -Wall

-CPPFLAGS += -Wundef

-#CPPFLAGS += -mshort-calls

-#CPPFLAGS += -fno-unit-at-a-time

-#CPPFLAGS += -Wstrict-prototypes

-#CPPFLAGS += -Wunreachable-code

-#CPPFLAGS += -Wsign-compare

-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-#CPPFLAGS += $(CSTANDARD)

-

-

-#---------------- Assembler Options ----------------

-#  -Wa,...:   tell GCC to pass this to the assembler.

-#  -adhlns:   create listing

-#  -gstabs:   have the assembler create line number information; note that

-#             for use in COFF files, additional information about filenames

-#             and function names needs to be present in the assembler source

-#             files -- see avr-libc docs [FIXME: not yet described there]

-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex

-#       dump that will be displayed for a given single line of source input.

-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

-

-

-#---------------- Library Options ----------------

-# Minimalistic printf version

-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min

-

-# Floating point printf version (requires MATH_LIB = -lm below)

-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt

-

-# If this is left blank, then it will use the Standard printf version.

-PRINTF_LIB =

-#PRINTF_LIB = $(PRINTF_LIB_MIN)

-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)

-

-

-# Minimalistic scanf version

-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min

-

-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)

-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt

-

-# If this is left blank, then it will use the Standard scanf version.

-SCANF_LIB =

-#SCANF_LIB = $(SCANF_LIB_MIN)

-#SCANF_LIB = $(SCANF_LIB_FLOAT)

-

-

-MATH_LIB = -lm

-

-

-# List any extra directories to look for libraries here.

-#     Each directory must be seperated by a space.

-#     Use forward slashes for directory separators.

-#     For a directory that has spaces, enclose it in quotes.

-EXTRALIBDIRS =

-

-

-

-#---------------- External Memory Options ----------------

-

-# 64 KB of external RAM, starting after internal RAM (ATmega128!),

-# used for variables (.data/.bss) and heap (malloc()).

-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff

-

-# 64 KB of external RAM, starting after internal RAM (ATmega128!),

-# only used for heap (malloc()).

-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff

-

-EXTMEMOPTS =

-

-

-

-#---------------- Linker Options ----------------

-#  -Wl,...:     tell GCC to pass this to linker.

-#    -Map:      create map file

-#    --cref:    add cross reference to  map file

-LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref

-LDFLAGS += -Wl,--relax

-LDFLAGS += -Wl,--gc-sections

-LDFLAGS += $(EXTMEMOPTS)

-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))

-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)

-#LDFLAGS += -T linker_script.x

-

-

-

-#---------------- Programming Options (avrdude) ----------------

-

-# Programming hardware

-# Type: avrdude -c ?

-# to get a full listing.

-#

-AVRDUDE_PROGRAMMER = jtagmkII

-

-# com1 = serial port. Use lpt1 to connect to parallel port.

-AVRDUDE_PORT = usb

-

-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex

-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep

-

-

-# Uncomment the following if you want avrdude's erase cycle counter.

-# Note that this counter needs to be initialized first using -Yn,

-# see avrdude manual.

-#AVRDUDE_ERASE_COUNTER = -y

-

-# Uncomment the following if you do /not/ wish a verification to be

-# performed after programming the device.

-#AVRDUDE_NO_VERIFY = -V

-

-# Increase verbosity level.  Please use this when submitting bug

-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>

-# to submit bug reports.

-#AVRDUDE_VERBOSE = -v -v

-

-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)

-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)

-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)

-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)

-

-

-

-#---------------- Debugging Options ----------------

-

-# For simulavr only - target MCU frequency.

-DEBUG_MFREQ = $(F_CPU)

-

-# Set the DEBUG_UI to either gdb or insight.

-# DEBUG_UI = gdb

-DEBUG_UI = insight

-

-# Set the debugging back-end to either avarice, simulavr.

-DEBUG_BACKEND = avarice

-#DEBUG_BACKEND = simulavr

-

-# GDB Init Filename.

-GDBINIT_FILE = __avr_gdbinit

-

-# When using avarice settings for the JTAG

-JTAG_DEV = /dev/com1

-

-# Debugging port used to communicate between GDB / avarice / simulavr.

-DEBUG_PORT = 4242

-

-# Debugging host used to communicate between GDB / avarice / simulavr, normally

-#     just set to localhost unless doing some sort of crazy debugging when

-#     avarice is running on a different computer.

-DEBUG_HOST = localhost

-

-

-

-#============================================================================

-

-

-# Define programs and commands.

-SHELL = sh

-CC = avr-gcc

-OBJCOPY = avr-objcopy

-OBJDUMP = avr-objdump

-SIZE = avr-size

-AR = avr-ar rcs

-NM = avr-nm

-AVRDUDE = avrdude

-REMOVE = rm -f

-REMOVEDIR = rm -rf

-COPY = cp

-WINSHELL = cmd

-

-

-# Define Messages

-# English

-MSG_ERRORS_NONE = Errors: none

-MSG_BEGIN = -------- begin --------

-MSG_END = --------  end  --------

-MSG_SIZE_BEFORE = Size before:

-MSG_SIZE_AFTER = Size after:

-MSG_COFF = Converting to AVR COFF:

-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:

-MSG_FLASH = Creating load file for Flash:

-MSG_EEPROM = Creating load file for EEPROM:

-MSG_EXTENDED_LISTING = Creating Extended Listing:

-MSG_SYMBOL_TABLE = Creating Symbol Table:

-MSG_LINKING = Linking:

-MSG_COMPILING = Compiling C:

-MSG_COMPILING_CPP = Compiling C++:

-MSG_ASSEMBLING = Assembling:

-MSG_CLEANING = Cleaning project:

-MSG_CREATING_LIBRARY = Creating library:

-

-

-

-

-# Define all object files.

-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

-

-# Define all listing files.

-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

-

-

-# Compiler flags to generate dependency files.

-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d

-

-

-# Combine all necessary flags and optional flags.

-# Add target processor to flags.

-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)

-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)

-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)

-

-

-

-

-

-# Default target.

-all: begin gccversion sizebefore build sizeafter end

-

-# Change the build target to build a HEX file or a library.

-build: elf hex eep lss sym

-#build: lib

-

-

-elf: $(TARGET).elf

-hex: $(TARGET).hex

-eep: $(TARGET).eep

-lss: $(TARGET).lss

-sym: $(TARGET).sym

-LIBNAME=lib$(TARGET).a

-lib: $(LIBNAME)

-

-

-

-# Eye candy.

-# AVR Studio 3.x does not check make's exit code but relies on

-# the following magic strings to be generated by the compile job.

-begin:

-	@echo

-	@echo $(MSG_BEGIN)

-

-end:

-	@echo $(MSG_END)

-	@echo

-

-

-# Display size of file.

-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex

-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf

-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )

-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )

-

-

-sizebefore:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-sizeafter:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-

-

-# Display compiler version information.

-gccversion :

-	@$(CC) --version

-

-

-# Program the device.

-program: $(TARGET).hex $(TARGET).eep

-	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)

-

-flip: $(TARGET).hex

-	batchisp -hardware usb -device $(MCU) -operation erase f

-	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-

-dfu: $(TARGET).hex

-	dfu-programmer $(MCU) erase

-	dfu-programmer $(MCU) flash $(TARGET).hex

-	dfu-programmer $(MCU) reset

-

-flip-ee: $(TARGET).hex $(TARGET).eep

-	$(COPY) $(TARGET).eep $(TARGET)eep.hex

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-	$(REMOVE) $(TARGET)eep.hex

-

-dfu-ee: $(TARGET).hex $(TARGET).eep

-	dfu-programmer $(MCU) eeprom-flash $(TARGET).eep

-	dfu-programmer $(MCU) reset

-

-

-# Generate avr-gdb config/init file which does the following:

-#     define the reset signal, load the target file, connect to target, and set

-#     a breakpoint at main().

-gdb-config:

-	@$(REMOVE) $(GDBINIT_FILE)

-	@echo define reset >> $(GDBINIT_FILE)

-	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)

-	@echo end >> $(GDBINIT_FILE)

-	@echo file $(TARGET).elf >> $(GDBINIT_FILE)

-	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)

-ifeq ($(DEBUG_BACKEND),simulavr)

-	@echo load  >> $(GDBINIT_FILE)

-endif

-	@echo break main >> $(GDBINIT_FILE)

-

-debug: gdb-config $(TARGET).elf

-ifeq ($(DEBUG_BACKEND), avarice)

-	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.

-	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \

-	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)

-	@$(WINSHELL) /c pause

-

-else

-	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \

-	$(DEBUG_MFREQ) --port $(DEBUG_PORT)

-endif

-	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)

-

-

-

-

-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.

-COFFCONVERT = $(OBJCOPY) --debugging

-COFFCONVERT += --change-section-address .data-0x800000

-COFFCONVERT += --change-section-address .bss-0x800000

-COFFCONVERT += --change-section-address .noinit-0x800000

-COFFCONVERT += --change-section-address .eeprom-0x810000

-

-

-

-coff: $(TARGET).elf

-	@echo

-	@echo $(MSG_COFF) $(TARGET).cof

-	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof

-

-

-extcoff: $(TARGET).elf

-	@echo

-	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof

-	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof

-

-

-

-# Create final output files (.hex, .eep) from ELF output file.

-%.hex: %.elf

-	@echo

-	@echo $(MSG_FLASH) $@

-	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@

-

-%.eep: %.elf

-	@echo

-	@echo $(MSG_EEPROM) $@

-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \

-	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0

-

-# Create extended listing file from ELF output file.

-%.lss: %.elf

-	@echo

-	@echo $(MSG_EXTENDED_LISTING) $@

-	$(OBJDUMP) -h -S -z $< > $@

-

-# Create a symbol table from ELF output file.

-%.sym: %.elf

-	@echo

-	@echo $(MSG_SYMBOL_TABLE) $@

-	$(NM) -n $< > $@

-

-

-

-# Create library from object files.

-.SECONDARY : $(TARGET).a

-.PRECIOUS : $(OBJ)

-%.a: $(OBJ)

-	@echo

-	@echo $(MSG_CREATING_LIBRARY) $@

-	$(AR) $@ $(OBJ)

-

-

-# Link: create ELF output file from object files.

-.SECONDARY : $(TARGET).elf

-.PRECIOUS : $(OBJ)

-%.elf: $(OBJ)

-	@echo

-	@echo $(MSG_LINKING) $@

-	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)

-

-

-# Compile: create object files from C source files.

-$(OBJDIR)/%.o : %.c

-	@echo

-	@echo $(MSG_COMPILING) $<

-	$(CC) -c $(ALL_CFLAGS) $< -o $@

-

-

-# Compile: create object files from C++ source files.

-$(OBJDIR)/%.o : %.cpp

-	@echo

-	@echo $(MSG_COMPILING_CPP) $<

-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@

-

-

-# Compile: create assembler files from C source files.

-%.s : %.c

-	$(CC) -S $(ALL_CFLAGS) $< -o $@

-

-

-# Compile: create assembler files from C++ source files.

-%.s : %.cpp

-	$(CC) -S $(ALL_CPPFLAGS) $< -o $@

-

-

-# Assemble: create object files from assembler source files.

-$(OBJDIR)/%.o : %.S

-	@echo

-	@echo $(MSG_ASSEMBLING) $<

-	$(CC) -c $(ALL_ASFLAGS) $< -o $@

-

-

-# Create preprocessed source for use in sending a bug report.

-%.i : %.c

-	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@

-

-

-# Target: clean project.

-clean: begin clean_list end

-

-clean_list :

-	@echo

-	@echo $(MSG_CLEANING)

-	$(REMOVE) $(TARGET).hex

-	$(REMOVE) $(TARGET).eep

-	$(REMOVE) $(TARGET).cof

-	$(REMOVE) $(TARGET).elf

-	$(REMOVE) $(TARGET).map

-	$(REMOVE) $(TARGET).sym

-	$(REMOVE) $(TARGET).lss

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

-	$(REMOVE) $(SRC:.c=.s)

-	$(REMOVE) $(SRC:.c=.d)

-	$(REMOVE) $(SRC:.c=.i)

-	$(REMOVEDIR) .dep

-

-doxygen:

-	@echo Generating Project Documentation...

-	@doxygen Doxygen.conf

-	@echo Documentation Generation Complete.

-

-clean_doxygen:

-	rm -rf Documentation

-

-# Create object files directory

-$(shell mkdir $(OBJDIR) 2>/dev/null)

-

-

-# Include the dependency files.

--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)

-

-

-# Listing of phony targets.

-.PHONY : all begin finish end sizebefore sizeafter gccversion \

-build elf hex eep lss sym coff extcoff doxygen clean          \

-clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \

-debug gdb-config

-

+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+#  >> Modified for use with the LUFA project. <<
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+# Dean Camera
+# Opendous Inc.
+# Denver Gingerich
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+#                Please customize the avrdude settings below first!
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make doxygen = Generate DoxyGen documentation for the project (must have
+#                DoxyGen installed)
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+
+# MCU name
+MCU = at90usb1287
+
+
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
+# "Board" inside the application directory.
+BOARD = USBKEY
+
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 8000000
+
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+
+# Target file name (without extension).
+TARGET = AudioInputHost
+
+
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+OBJDIR = .
+
+
+# Path to the LUFA library
+LUFA_PATH = ../../../..
+
+
+# LUFA library compile-time options and predefined tokens
+LUFA_OPTS  = -D USB_HOST_ONLY
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+
+
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(TARGET).c                                                 \
+	  ConfigDescriptor.c                                          \
+	  $(LUFA_SRC_USB)                                             \
+	  $(LUFA_SRC_SERIAL)
+
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+
+# List Assembler source files here.
+#     Make them always end in a capital .S.  Files ending in a lowercase .s
+#     will not be considered source files but generated files (assembler
+#     output from the compiler), and will be deleted upon "make clean"!
+#     Even though the DOS/Win* filesystem matches both .s and .S the same,
+#     it will preserve the spelling of the filenames, and gcc itself does
+#     care about how the name is spelled on its command-line.
+ASRC =
+
+
+# Optimization level, can be [0, 1, 2, 3, s].
+#     0 = turn off optimization. s = optimize for size.
+#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = s
+
+
+# Debugging format.
+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+#     AVR Studio 4.10 requires dwarf-2.
+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+
+# List any extra directories to look for include files here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = $(LUFA_PATH)/
+
+
+# Compiler flag to set the C Standard level.
+#     c89   = "ANSI" C
+#     gnu89 = c89 plus GCC extensions
+#     c99   = ISO C99 standard (not yet fully implemented)
+#     gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=c99
+
+
+# Place -D or -U options here for C sources
+CDEFS  = -DF_CPU=$(F_CPU)UL
+CDEFS += -DF_USB=$(F_USB)UL
+CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
+CDEFS += $(LUFA_OPTS)
+
+
+# Place -D or -U options here for ASM sources
+ADEFS  = -DF_CPU=$(F_CPU)
+ADEFS += -DF_USB=$(F_USB)UL
+ADEFS += -DBOARD=BOARD_$(BOARD)
+ADEFS += $(LUFA_OPTS)
+
+# Place -D or -U options here for C++ sources
+CPPDEFS  = -DF_CPU=$(F_CPU)UL
+CPPDEFS += -DF_USB=$(F_USB)UL
+CPPDEFS += -DBOARD=BOARD_$(BOARD)
+CPPDEFS += $(LUFA_OPTS)
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+
+
+#---------------- Compiler Options C ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
+CFLAGS += -fno-inline-small-functions
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+CFLAGS += -fno-strict-aliasing
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+
+
+#---------------- Compiler Options C++ ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CPPFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+
+
+#---------------- Assembler Options ----------------
+#  -Wa,...:   tell GCC to pass this to the assembler.
+#  -adhlns:   create listing
+#  -gstabs:   have the assembler create line number information; note that
+#             for use in COFF files, additional information about filenames
+#             and function names needs to be present in the assembler source
+#             files -- see avr-libc docs [FIXME: not yet described there]
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
+#       dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB =
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB =
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+
+MATH_LIB = -lm
+
+
+# List any extra directories to look for libraries here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
+#---------------- Linker Options ----------------
+#  -Wl,...:     tell GCC to pass this to linker.
+#    -Map:      create map file
+#    --cref:    add cross reference to  map file
+LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = jtagmkII
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = usb
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+#     just set to localhost unless doing some sort of crazy debugging when
+#     avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = --------  end  --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+
+
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+
+
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex eep lss sym
+#build: lib
+
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@echo
+	@echo $(MSG_BEGIN)
+
+end:
+	@echo $(MSG_END)
+	@echo
+
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
+MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
+FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
+
+
+sizebefore:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+sizeafter:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+
+
+# Display compiler version information.
+gccversion :
+	@$(CC) --version
+
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+flip: $(TARGET).hex
+	batchisp -hardware usb -device $(MCU) -operation erase f
+	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(TARGET).hex
+	dfu-programmer $(MCU) erase
+	dfu-programmer $(MCU) flash $(TARGET).hex
+	dfu-programmer $(MCU) reset
+
+flip-ee: $(TARGET).hex $(TARGET).eep
+	$(COPY) $(TARGET).eep $(TARGET)eep.hex
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+	$(REMOVE) $(TARGET)eep.hex
+
+dfu-ee: $(TARGET).hex $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
+	dfu-programmer $(MCU) reset
+
+
+# Generate avr-gdb config/init file which does the following:
+#     define the reset signal, load the target file, connect to target, and set
+#     a breakpoint at main().
+gdb-config:
+	@$(REMOVE) $(GDBINIT_FILE)
+	@echo define reset >> $(GDBINIT_FILE)
+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+	@echo end >> $(GDBINIT_FILE)
+	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+	@echo load  >> $(GDBINIT_FILE)
+endif
+	@echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+	@$(WINSHELL) /c pause
+
+else
+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+
+
+coff: $(TARGET).elf
+	@echo
+	@echo $(MSG_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+	@echo
+	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
+
+%.eep: %.elf
+	@echo
+	@echo $(MSG_EEPROM) $@
+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+	@echo
+	@echo $(MSG_EXTENDED_LISTING) $@
+	$(OBJDUMP) -h -S -z $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+	@echo
+	@echo $(MSG_SYMBOL_TABLE) $@
+	$(NM) -n $< > $@
+
+
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+	@echo
+	@echo $(MSG_CREATING_LIBRARY) $@
+	$(AR) $@ $(OBJ)
+
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+	@echo
+	@echo $(MSG_LINKING) $@
+	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+	@echo
+	@echo $(MSG_COMPILING) $<
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+	@echo
+	@echo $(MSG_COMPILING_CPP) $<
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+	$(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+	@echo
+	@echo $(MSG_ASSEMBLING) $<
+	$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+	@echo
+	@echo $(MSG_CLEANING)
+	$(REMOVE) $(TARGET).hex
+	$(REMOVE) $(TARGET).eep
+	$(REMOVE) $(TARGET).cof
+	$(REMOVE) $(TARGET).elf
+	$(REMOVE) $(TARGET).map
+	$(REMOVE) $(TARGET).sym
+	$(REMOVE) $(TARGET).lss
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+	$(REMOVE) $(SRC:.c=.s)
+	$(REMOVE) $(SRC:.c=.d)
+	$(REMOVE) $(SRC:.c=.i)
+	$(REMOVEDIR) .dep
+
+doxygen:
+	@echo Generating Project Documentation...
+	@doxygen Doxygen.conf
+	@echo Documentation Generation Complete.
+
+clean_doxygen:
+	rm -rf Documentation
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff doxygen clean          \
+clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
+debug gdb-config
+
diff --git a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.c b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.c
index 1fb64a1a4..3f0b4a326 100644
--- a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.c
+++ b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.c
@@ -1,270 +1,270 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Main source file for the AudioOutputHost demo. This file contains the main tasks of

- *  the demo and is responsible for the initial application hardware configuration.

- */

-

-#include "AudioOutputHost.h"

-

-/** Main program entry point. This routine configures the hardware required by the application, then

- *  enters a loop to run the application tasks in sequence.

- */

-int main(void)

-{

-	SetupHardware();

-

-	puts_P(PSTR(ESC_FG_CYAN "Audio Output Host Demo running.\r\n" ESC_FG_WHITE));

-

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-	sei();

-

-	for (;;)

-	{

-		Audio_Task();

-		USB_USBTask();

-	}

-}

-

-/** Configures the board hardware and chip peripherals for the demo's functionality. */

-void SetupHardware(void)

-{

-	/* Disable watchdog if enabled by bootloader/fuses */

-	MCUSR &= ~(1 << WDRF);

-	wdt_disable();

-

-	/* Disable clock division */

-	clock_prescale_set(clock_div_1);

-

-	/* Hardware Initialization */

-	Serial_Init(9600, false);

-	Buttons_Init();

-	ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);

-	ADC_SetupChannel(MIC_IN_ADC_CHANNEL);	

-	LEDs_Init();

-	USB_Init();

-

-	/* Create a stdio stream for the serial port for stdin and stdout */

-	Serial_CreateStream(NULL);

-}

-

-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and

- *  starts the library USB task to begin the enumeration and USB management process.

- */

-void EVENT_USB_Host_DeviceAttached(void)

-{

-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));

-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);

-}

-

-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and

- *  stops the library USB task management process.

- */

-void EVENT_USB_Host_DeviceUnattached(void)

-{

-	puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-}

-

-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully

- *  enumerated by the host and is now ready to be used by the application.

- */

-void EVENT_USB_Host_DeviceEnumerationComplete(void)

-{

-	LEDs_SetAllLEDs(LEDMASK_USB_READY);

-}

-

-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */

-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)

-{

-	USB_Disable();

-

-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"

-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-	for(;;);

-}

-

-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while

- *  enumerating an attached USB device.

- */

-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,

-                                            const uint8_t SubErrorCode)

-{

-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"

-	                         " -- Error Code %d\r\n"

-	                         " -- Sub Error Code %d\r\n"

-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-}

-

-void Audio_Task(void)

-{

-	uint8_t ErrorCode;

-

-	switch (USB_HostState)

-	{

-		case HOST_STATE_Addressed:

-			puts_P(PSTR("Getting Config Data.\r\n"));

-

-			/* Get and process the configuration descriptor data */

-			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)

-			{

-				if (ErrorCode == ControlError)

-				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));

-				else

-				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));

-

-				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error status */

-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-

-			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */

-			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)

-			{

-				printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"

-				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error status */

-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-			

-			if ((ErrorCode = USB_Host_SetInterfaceAltSetting(StreamingInterfaceIndex,

-			                                                 StreamingInterfaceAltSetting)) != HOST_SENDCONTROL_Successful)

-			{

-				printf_P(PSTR(ESC_FG_RED "Could not set alternative streaming interface setting.\r\n"

-				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error status */

-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-

-			USB_ControlRequest = (USB_Request_Header_t)

-				{

-					.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT),

-					.bRequest      = AUDIO_REQ_SetCurrent,

-					.wValue        = (AUDIO_EPCONTROL_SamplingFreq << 8),

-					.wIndex        = StreamingEndpointAddress,

-					.wLength       = sizeof(USB_Audio_SampleFreq_t),

-				};

-				

-			USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);

-

-			/* Select the control pipe for the request transfer */

-			Pipe_SelectPipe(PIPE_CONTROLPIPE);

-

-			/* Set the sample rate on the streaming interface endpoint */

-			if ((ErrorCode = USB_Host_SendControlRequest(&SampleRate)) != HOST_SENDCONTROL_Successful)

-			{

-				/* Indicate error status */

-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-	

-			/* Sample reload timer initialization */

-			TIMSK0  = (1 << OCIE0A);

-			OCR0A   = ((F_CPU / 8 / 48000) - 1);

-			TCCR0A  = (1 << WGM01);  // CTC mode

-			TCCR0B  = (1 << CS01);   // Fcpu/8 speed	

-			

-			puts_P(PSTR("Speaker Enumerated.\r\n"));

-

-			USB_HostState = HOST_STATE_Configured;

-			break;

-		case HOST_STATE_Configured:

-			/* Do nothing - audio stream is handled by the timer interrupt routine */

-			break;

-	}

-}

-

-/** ISR to handle the reloading of the endpoint with the next sample. */

-ISR(TIMER0_COMPA_vect, ISR_BLOCK)

-{

-	uint8_t PrevPipe = Pipe_GetCurrentPipe();

-

-	Pipe_SelectPipe(AUDIO_DATA_OUT_PIPE);

-	Pipe_Unfreeze();

-

-	/* Check if the current pipe can be written to (device ready for more data) */

-	if (Pipe_IsOUTReady())

-	{

-		int16_t AudioSample;		

-	

-		#if defined(USE_TEST_TONE)

-			static uint8_t SquareWaveSampleCount;

-			static int16_t CurrentWaveValue;

-			

-			/* In test tone mode, generate a square wave at 1/256 of the sample rate */

-			if (SquareWaveSampleCount++ == 0xFF)

-			  CurrentWaveValue ^= 0x8000;

-			

-			/* Only generate audio if the board button is being pressed */

-			AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;

-		#else

-			/* Audio sample is ADC value scaled to fit the entire range */

-			AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());

-

-			#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)

-			/* Microphone is biased to half rail voltage, subtract the bias from the sample value */

-			AudioSample -= (SAMPLE_MAX_RANGE / 2);

-			#endif		

-		#endif

-		

-		Pipe_Write_16_LE(AudioSample);

-		Pipe_Write_16_LE(AudioSample);

-		

-		if (!(Pipe_IsReadWriteAllowed()))

-		  Pipe_ClearOUT();

-	}

-

-	Pipe_Freeze();

-	Pipe_SelectPipe(PrevPipe);

-}

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the AudioOutputHost demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "AudioOutputHost.h"
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	puts_P(PSTR(ESC_FG_CYAN "Audio Output Host Demo running.\r\n" ESC_FG_WHITE));
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	sei();
+
+	for (;;)
+	{
+		Audio_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+
+	/* Hardware Initialization */
+	Serial_Init(9600, false);
+	Buttons_Init();
+	ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
+	ADC_SetupChannel(MIC_IN_ADC_CHANNEL);	
+	LEDs_Init();
+	USB_Init();
+
+	/* Create a stdio stream for the serial port for stdin and stdout */
+	Serial_CreateStream(NULL);
+}
+
+/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Host_DeviceAttached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
+ *  stops the library USB task management process.
+ */
+void EVENT_USB_Host_DeviceUnattached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
+ *  enumerated by the host and is now ready to be used by the application.
+ */
+void EVENT_USB_Host_DeviceEnumerationComplete(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+}
+
+/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
+{
+	USB_Disable();
+
+	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
+	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	for(;;);
+}
+
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
+ *  enumerating an attached USB device.
+ */
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
+                                            const uint8_t SubErrorCode)
+{
+	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
+	                         " -- Error Code %d\r\n"
+	                         " -- Sub Error Code %d\r\n"
+	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+}
+
+void Audio_Task(void)
+{
+	uint8_t ErrorCode;
+
+	switch (USB_HostState)
+	{
+		case HOST_STATE_Addressed:
+			puts_P(PSTR("Getting Config Data.\r\n"));
+
+			/* Get and process the configuration descriptor data */
+			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
+			{
+				if (ErrorCode == ControlError)
+				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
+				else
+				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
+
+				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error status */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
+			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
+			{
+				printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
+				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error status */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+			
+			if ((ErrorCode = USB_Host_SetInterfaceAltSetting(StreamingInterfaceIndex,
+			                                                 StreamingInterfaceAltSetting)) != HOST_SENDCONTROL_Successful)
+			{
+				printf_P(PSTR(ESC_FG_RED "Could not set alternative streaming interface setting.\r\n"
+				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error status */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			USB_ControlRequest = (USB_Request_Header_t)
+				{
+					.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT),
+					.bRequest      = AUDIO_REQ_SetCurrent,
+					.wValue        = (AUDIO_EPCONTROL_SamplingFreq << 8),
+					.wIndex        = StreamingEndpointAddress,
+					.wLength       = sizeof(USB_Audio_SampleFreq_t),
+				};
+				
+			USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);
+
+			/* Select the control pipe for the request transfer */
+			Pipe_SelectPipe(PIPE_CONTROLPIPE);
+
+			/* Set the sample rate on the streaming interface endpoint */
+			if ((ErrorCode = USB_Host_SendControlRequest(&SampleRate)) != HOST_SENDCONTROL_Successful)
+			{
+				/* Indicate error status */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+	
+			/* Sample reload timer initialization */
+			TIMSK0  = (1 << OCIE0A);
+			OCR0A   = ((F_CPU / 8 / 48000) - 1);
+			TCCR0A  = (1 << WGM01);  // CTC mode
+			TCCR0B  = (1 << CS01);   // Fcpu/8 speed	
+			
+			puts_P(PSTR("Speaker Enumerated.\r\n"));
+
+			USB_HostState = HOST_STATE_Configured;
+			break;
+		case HOST_STATE_Configured:
+			/* Do nothing - audio stream is handled by the timer interrupt routine */
+			break;
+	}
+}
+
+/** ISR to handle the reloading of the endpoint with the next sample. */
+ISR(TIMER0_COMPA_vect, ISR_BLOCK)
+{
+	uint8_t PrevPipe = Pipe_GetCurrentPipe();
+
+	Pipe_SelectPipe(AUDIO_DATA_OUT_PIPE);
+	Pipe_Unfreeze();
+
+	/* Check if the current pipe can be written to (device ready for more data) */
+	if (Pipe_IsOUTReady())
+	{
+		int16_t AudioSample;		
+	
+		#if defined(USE_TEST_TONE)
+			static uint8_t SquareWaveSampleCount;
+			static int16_t CurrentWaveValue;
+			
+			/* In test tone mode, generate a square wave at 1/256 of the sample rate */
+			if (SquareWaveSampleCount++ == 0xFF)
+			  CurrentWaveValue ^= 0x8000;
+			
+			/* Only generate audio if the board button is being pressed */
+			AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;
+		#else
+			/* Audio sample is ADC value scaled to fit the entire range */
+			AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());
+
+			#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)
+			/* Microphone is biased to half rail voltage, subtract the bias from the sample value */
+			AudioSample -= (SAMPLE_MAX_RANGE / 2);
+			#endif		
+		#endif
+		
+		Pipe_Write_16_LE(AudioSample);
+		Pipe_Write_16_LE(AudioSample);
+		
+		if (!(Pipe_IsReadWriteAllowed()))
+		  Pipe_ClearOUT();
+	}
+
+	Pipe_Freeze();
+	Pipe_SelectPipe(PrevPipe);
+}
diff --git a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h
index b151f2283..d4c87e32f 100644
--- a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h
+++ b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h
@@ -1,94 +1,94 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header file for AudioOutputHost.c.

- */

-

-#ifndef _AUDIO_OUTPUT_HOST_H_

-#define _AUDIO_OUTPUT_HOST_H_

-

-	/* Includes: */

-		#include <avr/io.h>

-		#include <avr/wdt.h>

-		#include <avr/pgmspace.h>

-		#include <avr/power.h>

-		#include <avr/interrupt.h>

-		#include <stdio.h>

-

-		#include <LUFA/Version.h>

-		#include <LUFA/Drivers/Misc/TerminalCodes.h>

-		#include <LUFA/Drivers/USB/USB.h>

-		#include <LUFA/Drivers/Peripheral/Serial.h>

-		#include <LUFA/Drivers/Peripheral/ADC.h>

-		#include <LUFA/Drivers/Board/LEDs.h>

-		#include <LUFA/Drivers/Board/Buttons.h>

-

-		#include "ConfigDescriptor.h"

-

-	/* Macros: */

-		/** ADC channel number for the microphone input. */

-		#define MIC_IN_ADC_CHANNEL        2

-

-		/** ADC channel MUX mask for the microphone input. */

-		#define MIC_IN_ADC_MUX_MASK       ADC_CHANNEL2

-

-		/** Maximum audio sample value for the microphone input. */

-		#define SAMPLE_MAX_RANGE          0xFFFF

-

-		/** Maximum ADC range for the microphone input. */

-		#define ADC_MAX_RANGE             0x3FF

-

-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

-		#define LEDMASK_USB_NOTREADY      LEDS_LED1

-

-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */

-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)

-

-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */

-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)

-

-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */

-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)

-

-	/* Function Prototypes: */

-		void Audio_Task(void);

-		void SetupHardware(void);

-

-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);

-		void EVENT_USB_Host_DeviceAttached(void);

-		void EVENT_USB_Host_DeviceUnattached(void);

-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,

-		                                            const uint8_t SubErrorCode);

-		void EVENT_USB_Host_DeviceEnumerationComplete(void);

-

-#endif

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for AudioOutputHost.c.
+ */
+
+#ifndef _AUDIO_OUTPUT_HOST_H_
+#define _AUDIO_OUTPUT_HOST_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/pgmspace.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+		#include <stdio.h>
+
+		#include <LUFA/Version.h>
+		#include <LUFA/Drivers/Misc/TerminalCodes.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Drivers/Peripheral/Serial.h>
+		#include <LUFA/Drivers/Peripheral/ADC.h>
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/Board/Buttons.h>
+
+		#include "ConfigDescriptor.h"
+
+	/* Macros: */
+		/** ADC channel number for the microphone input. */
+		#define MIC_IN_ADC_CHANNEL        2
+
+		/** ADC channel MUX mask for the microphone input. */
+		#define MIC_IN_ADC_MUX_MASK       ADC_CHANNEL2
+
+		/** Maximum audio sample value for the microphone input. */
+		#define SAMPLE_MAX_RANGE          0xFFFF
+
+		/** Maximum ADC range for the microphone input. */
+		#define ADC_MAX_RANGE             0x3FF
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY      LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
+
+	/* Function Prototypes: */
+		void Audio_Task(void);
+		void SetupHardware(void);
+
+		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
+		void EVENT_USB_Host_DeviceAttached(void);
+		void EVENT_USB_Host_DeviceUnattached(void);
+		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
+		                                            const uint8_t SubErrorCode);
+		void EVENT_USB_Host_DeviceEnumerationComplete(void);
+
+#endif
+
diff --git a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt
index 7004053c4..0faeedc5c 100644
--- a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt
+++ b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt
@@ -1,78 +1,78 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \mainpage Audio Output Host Demo

- *

- *  \section Sec_Compat Demo Compatibility:

- *

- *  The following list indicates what microcontrollers are compatible with this demo.

- *

- *  - Series 7 USB AVRs (AT90USBxxx7)

- *

- *  \section Sec_Info USB Information:

- *

- *  The following table gives a rundown of the USB utilization of this demo.

- *

- *  <table>

- *   <tr>

- *    <td><b>USB Mode:</b></td>

- *    <td>Host</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Class:</b></td>

- *    <td>Audio Class</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Subclass:</b></td>

- *    <td>Standard Audio Device</td>

- *   </tr>

- *   <tr>

- *    <td><b>Relevant Standards:</b></td>

- *    <td>USBIF Audio 1.0 Class Specification \n

- *        USBIF Audio 1.0 Class Terminal Types Specification \n

- *        USBIF Audio 1.0 Data Formats Specification</td>

- *   </tr>

- *   <tr>

- *    <td><b>Usable Speeds:</b></td>

- *    <td>Full Speed Mode</td>

- *   </tr>

- *  </table>

- *

- *  \section Sec_Description Project Description:

- *

- *  Audio Output host demonstration application. This gives a simple reference

- *  application for implementing a USB Audio host, for USB Audio devices using

- *  the USB Audio 1.0 class profile.

- *

- *  By default, the demo will produce a square wave test tone when the board

- *  button is pressed. If USE_TEST_TONE is not defined in the project makefile,

- *  incoming audio from the ADC channel 1 will be sampled and sent to the attached

- *  USB audio device instead.

- *

- *  \section Sec_Options Project Options

- *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

- *

- *  <table>

- *   <tr>

- *    <td><b>Define Name:</b></td>

- *    <td><b>Location:</b></td>

- *    <td><b>Description:</b></td>

- *   </tr>

- *   <tr>

- *    <td>USE_TEST_TONE</td>

- *    <td>Makefile LUFA_OPTS</td>

- *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed

- *        instead of sampling the board microphone.</td>

- *   </tr>

- *   <tr>

- *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>

- *    <td>Makefile LUFA_OPTS</td>

- *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>

- *   </tr>

- *  </table>

- */

-

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Audio Output Host Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  - Series 7 USB AVRs (AT90USBxxx7)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Host</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Audio Class</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Standard Audio Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF Audio 1.0 Class Specification \n
+ *        USBIF Audio 1.0 Class Terminal Types Specification \n
+ *        USBIF Audio 1.0 Data Formats Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Usable Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Audio Output host demonstration application. This gives a simple reference
+ *  application for implementing a USB Audio host, for USB Audio devices using
+ *  the USB Audio 1.0 class profile.
+ *
+ *  By default, the demo will produce a square wave test tone when the board
+ *  button is pressed. If USE_TEST_TONE is not defined in the project makefile,
+ *  incoming audio from the ADC channel 1 will be sampled and sent to the attached
+ *  USB audio device instead.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>Define Name:</b></td>
+ *    <td><b>Location:</b></td>
+ *    <td><b>Description:</b></td>
+ *   </tr>
+ *   <tr>
+ *    <td>USE_TEST_TONE</td>
+ *    <td>Makefile LUFA_OPTS</td>
+ *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
+ *        instead of sampling the board microphone.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
+ *    <td>Makefile LUFA_OPTS</td>
+ *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
+ *   </tr>
+ *  </table>
+ */
+
diff --git a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c
index 46a0e331f..ac1c23405 100644
--- a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c
@@ -1,220 +1,220 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations

- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures

- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.

- */

-

-#include "ConfigDescriptor.h"

-

-/** Index of the currently used Audio Streaming Interface within the device. */

-uint8_t StreamingInterfaceIndex      = 0;

-

-/** Alternative Setting of the currently used Audio Streaming Interface within the device. */

-uint8_t StreamingInterfaceAltSetting = 0;

-

-/** Address of the streaming audio endpoint currently in use within the device. */

-uint8_t StreamingEndpointAddress     = 0;

-

-

-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This

- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate

- *  with compatible devices.

- *

- *  This routine searches for a Streaming Audio interface descriptor containing a valid Isochronous audio endpoint.

- *

- *  \return An error code from the \ref AudioHost_GetConfigDescriptorDataCodes_t enum.

- */

-uint8_t ProcessConfigurationDescriptor(void)

-{

-	uint8_t  ConfigDescriptorData[512];

-	void*    CurrConfigLocation = ConfigDescriptorData;

-	uint16_t CurrConfigBytesRem;

-

-	USB_Descriptor_Interface_t* AudioControlInterface   = NULL;

-	USB_Descriptor_Interface_t* AudioStreamingInterface = NULL;

-	USB_Descriptor_Endpoint_t*  DataOUTEndpoint         = NULL;

-

-	/* Retrieve the entire configuration descriptor into the allocated buffer */

-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))

-	{

-		case HOST_GETCONFIG_Successful:

-			break;

-		case HOST_GETCONFIG_InvalidData:

-			return InvalidConfigDataReturned;

-		case HOST_GETCONFIG_BuffOverflow:

-			return DescriptorTooLarge;

-		default:

-			return ControlError;

-	}

-

-	while (!(DataOUTEndpoint))

-	{

-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */

-		if (!(AudioControlInterface) ||

-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,

-		                              DComp_NextAudioInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)

-		{

-			/* Check if we haven't found an Audio Control interface yet, or if we have run out of related Audio Streaming interfaces */

-			if (!(AudioControlInterface) ||

-			    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,

-				                          DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)

-			{

-				/* Find a new Audio Control interface if the current one doesn't contain a compatible streaming interface */

-				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,

-				                              DComp_NextAudioControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)

-				{

-					/* Descriptor not found, error out */

-					return NoCompatibleInterfaceFound;

-				}

-

-				/* Save the interface in case we need to refer back to it later */

-				AudioControlInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);			

-

-				/* Find the next Audio Streaming interface within that Audio Control interface */

-				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,

-				                              DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)

-				{

-					/* Descriptor not found, error out */

-					return NoCompatibleInterfaceFound;

-				}

-			}

-

-			/* Save the interface in case we need to refer back to it later */

-			AudioStreamingInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);

-

-			/* Skip the remainder of the loop as we have not found an endpoint yet */

-			continue;

-		}

-

-		/* Retrieve the endpoint address from the endpoint descriptor */

-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);

-

-		/* Save the endpoint if it is an OUT type endpoint */

-		if (!(EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN))

-		  DataOUTEndpoint = EndpointData;

-	}

-

-	StreamingInterfaceIndex      = AudioStreamingInterface->InterfaceNumber;

-	StreamingInterfaceAltSetting = AudioStreamingInterface->AlternateSetting;

-	StreamingEndpointAddress     = DataOUTEndpoint->EndpointAddress;

-

-	/* Configure the Audio data OUT pipe */

-	Pipe_ConfigurePipe(AUDIO_DATA_OUT_PIPE, EP_TYPE_ISOCHRONOUS, PIPE_TOKEN_OUT,

-	                   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_DOUBLE);

-

-	/* Valid data found, return success */

-	return SuccessfulConfigRead;

-}

-

-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's

- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration

- *  descriptor processing if an incompatible descriptor configuration is found.

- *

- *  This comparator searches for the next Interface descriptor of the correct Audio Control Class, Subclass and Protocol values.

- *

- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum

- */

-uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor)

-{

-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);

-

-	if (Header->Type == DTYPE_Interface)

-	{

-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);

-

-		if ((Interface->Class    == AUDIO_CSCP_AudioClass) &&

-		    (Interface->SubClass == AUDIO_CSCP_ControlSubclass) &&

-		    (Interface->Protocol == AUDIO_CSCP_ControlProtocol))

-		{

-			return DESCRIPTOR_SEARCH_Found;

-		}

-	}

-

-	return DESCRIPTOR_SEARCH_NotFound;

-}

-

-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's

- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration

- *  descriptor processing if an incompatible descriptor configuration is found.

- *

- *  This comparator searches for the next Interface descriptor of the correct Audio Streaming Class, Subclass and Protocol values.

- *

- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum

- */

-uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor)

-{

-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);

-

-	if (Header->Type == DTYPE_Interface)

-	{

-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);

-

-		if ((Interface->Class    == AUDIO_CSCP_AudioClass) &&

-		    (Interface->SubClass == AUDIO_CSCP_AudioStreamingSubclass) &&

-		    (Interface->Protocol == AUDIO_CSCP_StreamingProtocol))

-		{

-			return DESCRIPTOR_SEARCH_Found;

-		}

-	}

-

-	return DESCRIPTOR_SEARCH_NotFound;

-}

-

-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's

- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration

- *  descriptor processing if an incompatible descriptor configuration is found.

- *

- *  This comparator searches for the next Isochronous Endpoint descriptor within the current interface, aborting the

- *  search if another interface descriptor is found before the next endpoint.

- *

- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum

- */

-uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor)

-{

-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);

-

-	if (Header->Type == DTYPE_Endpoint)

-	{

-		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);

-

-		if ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_ISOCHRONOUS)

-		  return DESCRIPTOR_SEARCH_Found;

-	}

-	else if (Header->Type == DTYPE_Interface)

-	{

-		return DESCRIPTOR_SEARCH_Fail;

-	}

-

-	return DESCRIPTOR_SEARCH_NotFound;

-}

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
+ *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
+ *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
+ */
+
+#include "ConfigDescriptor.h"
+
+/** Index of the currently used Audio Streaming Interface within the device. */
+uint8_t StreamingInterfaceIndex      = 0;
+
+/** Alternative Setting of the currently used Audio Streaming Interface within the device. */
+uint8_t StreamingInterfaceAltSetting = 0;
+
+/** Address of the streaming audio endpoint currently in use within the device. */
+uint8_t StreamingEndpointAddress     = 0;
+
+
+/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
+ *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
+ *  with compatible devices.
+ *
+ *  This routine searches for a Streaming Audio interface descriptor containing a valid Isochronous audio endpoint.
+ *
+ *  \return An error code from the \ref AudioHost_GetConfigDescriptorDataCodes_t enum.
+ */
+uint8_t ProcessConfigurationDescriptor(void)
+{
+	uint8_t  ConfigDescriptorData[512];
+	void*    CurrConfigLocation = ConfigDescriptorData;
+	uint16_t CurrConfigBytesRem;
+
+	USB_Descriptor_Interface_t* AudioControlInterface   = NULL;
+	USB_Descriptor_Interface_t* AudioStreamingInterface = NULL;
+	USB_Descriptor_Endpoint_t*  DataOUTEndpoint         = NULL;
+
+	/* Retrieve the entire configuration descriptor into the allocated buffer */
+	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
+	{
+		case HOST_GETCONFIG_Successful:
+			break;
+		case HOST_GETCONFIG_InvalidData:
+			return InvalidConfigDataReturned;
+		case HOST_GETCONFIG_BuffOverflow:
+			return DescriptorTooLarge;
+		default:
+			return ControlError;
+	}
+
+	while (!(DataOUTEndpoint))
+	{
+		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
+		if (!(AudioControlInterface) ||
+		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
+		                              DComp_NextAudioInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
+		{
+			/* Check if we haven't found an Audio Control interface yet, or if we have run out of related Audio Streaming interfaces */
+			if (!(AudioControlInterface) ||
+			    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
+				                          DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)
+			{
+				/* Find a new Audio Control interface if the current one doesn't contain a compatible streaming interface */
+				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
+				                              DComp_NextAudioControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
+				{
+					/* Descriptor not found, error out */
+					return NoCompatibleInterfaceFound;
+				}
+
+				/* Save the interface in case we need to refer back to it later */
+				AudioControlInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);			
+
+				/* Find the next Audio Streaming interface within that Audio Control interface */
+				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
+				                              DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)
+				{
+					/* Descriptor not found, error out */
+					return NoCompatibleInterfaceFound;
+				}
+			}
+
+			/* Save the interface in case we need to refer back to it later */
+			AudioStreamingInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
+
+			/* Skip the remainder of the loop as we have not found an endpoint yet */
+			continue;
+		}
+
+		/* Retrieve the endpoint address from the endpoint descriptor */
+		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
+
+		/* Save the endpoint if it is an OUT type endpoint */
+		if (!(EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN))
+		  DataOUTEndpoint = EndpointData;
+	}
+
+	StreamingInterfaceIndex      = AudioStreamingInterface->InterfaceNumber;
+	StreamingInterfaceAltSetting = AudioStreamingInterface->AlternateSetting;
+	StreamingEndpointAddress     = DataOUTEndpoint->EndpointAddress;
+
+	/* Configure the Audio data OUT pipe */
+	Pipe_ConfigurePipe(AUDIO_DATA_OUT_PIPE, EP_TYPE_ISOCHRONOUS, PIPE_TOKEN_OUT,
+	                   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_DOUBLE);
+
+	/* Valid data found, return success */
+	return SuccessfulConfigRead;
+}
+
+/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
+ *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
+ *  descriptor processing if an incompatible descriptor configuration is found.
+ *
+ *  This comparator searches for the next Interface descriptor of the correct Audio Control Class, Subclass and Protocol values.
+ *
+ *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
+ */
+uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor)
+{
+	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
+
+	if (Header->Type == DTYPE_Interface)
+	{
+		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
+
+		if ((Interface->Class    == AUDIO_CSCP_AudioClass) &&
+		    (Interface->SubClass == AUDIO_CSCP_ControlSubclass) &&
+		    (Interface->Protocol == AUDIO_CSCP_ControlProtocol))
+		{
+			return DESCRIPTOR_SEARCH_Found;
+		}
+	}
+
+	return DESCRIPTOR_SEARCH_NotFound;
+}
+
+/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
+ *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
+ *  descriptor processing if an incompatible descriptor configuration is found.
+ *
+ *  This comparator searches for the next Interface descriptor of the correct Audio Streaming Class, Subclass and Protocol values.
+ *
+ *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
+ */
+uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor)
+{
+	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
+
+	if (Header->Type == DTYPE_Interface)
+	{
+		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
+
+		if ((Interface->Class    == AUDIO_CSCP_AudioClass) &&
+		    (Interface->SubClass == AUDIO_CSCP_AudioStreamingSubclass) &&
+		    (Interface->Protocol == AUDIO_CSCP_StreamingProtocol))
+		{
+			return DESCRIPTOR_SEARCH_Found;
+		}
+	}
+
+	return DESCRIPTOR_SEARCH_NotFound;
+}
+
+/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
+ *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
+ *  descriptor processing if an incompatible descriptor configuration is found.
+ *
+ *  This comparator searches for the next Isochronous Endpoint descriptor within the current interface, aborting the
+ *  search if another interface descriptor is found before the next endpoint.
+ *
+ *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
+ */
+uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor)
+{
+	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
+
+	if (Header->Type == DTYPE_Endpoint)
+	{
+		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
+
+		if ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_ISOCHRONOUS)
+		  return DESCRIPTOR_SEARCH_Found;
+	}
+	else if (Header->Type == DTYPE_Interface)
+	{
+		return DESCRIPTOR_SEARCH_Fail;
+	}
+
+	return DESCRIPTOR_SEARCH_NotFound;
+}
diff --git a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h
index 08dc69a5f..06bb8288e 100644
--- a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h
@@ -1,72 +1,72 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header file for ConfigDescriptor.c.

- */

-

-#ifndef _CONFIGDESCRIPTOR_H_

-#define _CONFIGDESCRIPTOR_H_

-

-	/* Includes: */

-		#include <LUFA/Drivers/USB/USB.h>

-

-		#include "AudioOutputHost.h"

-

-	/* Macros: */

-		/** Pipe number for the Audio data OUT pipe. */

-		#define AUDIO_DATA_OUT_PIPE          1

-

-	/* Enums: */

-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */

-		enum AudioHost_GetConfigDescriptorDataCodes_t

-		{

-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */

-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */

-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */

-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */

-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */

-		};

-

-	/* External Variables: */

-		extern uint8_t StreamingInterfaceIndex;

-		extern uint8_t StreamingInterfaceAltSetting;

-		extern uint8_t StreamingEndpointAddress;

-

-	/* Function Prototypes: */

-		uint8_t ProcessConfigurationDescriptor(void);

-

-		uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor);

-		uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor);

-		uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor);

-

-#endif

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for ConfigDescriptor.c.
+ */
+
+#ifndef _CONFIGDESCRIPTOR_H_
+#define _CONFIGDESCRIPTOR_H_
+
+	/* Includes: */
+		#include <LUFA/Drivers/USB/USB.h>
+
+		#include "AudioOutputHost.h"
+
+	/* Macros: */
+		/** Pipe number for the Audio data OUT pipe. */
+		#define AUDIO_DATA_OUT_PIPE          1
+
+	/* Enums: */
+		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
+		enum AudioHost_GetConfigDescriptorDataCodes_t
+		{
+			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
+			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
+			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
+			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
+			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
+		};
+
+	/* External Variables: */
+		extern uint8_t StreamingInterfaceIndex;
+		extern uint8_t StreamingInterfaceAltSetting;
+		extern uint8_t StreamingEndpointAddress;
+
+	/* Function Prototypes: */
+		uint8_t ProcessConfigurationDescriptor(void);
+
+		uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor);
+		uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor);
+		uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor);
+
+#endif
+
diff --git a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf
index 2e3529fb3..2428fb101 100644
--- a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf
+++ b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf
@@ -1,1565 +1,1565 @@
-# Doxyfile 1.6.2

-

-# This file describes the settings to be used by the documentation system

-# doxygen (www.doxygen.org) for a project

-#

-# All text after a hash (#) is considered a comment and will be ignored

-# The format is:

-#       TAG = value [value, ...]

-# For lists items can also be appended using:

-#       TAG += value [value, ...]

-# Values that contain spaces should be placed between quotes (" ")

-

-#---------------------------------------------------------------------------

-# Project related configuration options

-#---------------------------------------------------------------------------

-

-# This tag specifies the encoding used for all characters in the config file

-# that follow. The default is UTF-8 which is also the encoding used for all

-# text before the first occurrence of this tag. Doxygen uses libiconv (or the

-# iconv built into libc) for the transcoding. See

-# http://www.gnu.org/software/libiconv for the list of possible encodings.

-

-DOXYFILE_ENCODING      = UTF-8

-

-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded

-# by quotes) that should identify the project.

-

-PROJECT_NAME           = "LUFA Library - Audio Output Host"

-

-# The PROJECT_NUMBER tag can be used to enter a project or revision number.

-# This could be handy for archiving the generated documentation or

-# if some version control system is used.

-

-PROJECT_NUMBER         = 0.0.0

-

-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)

-# base path where the generated documentation will be put.

-# If a relative path is entered, it will be relative to the location

-# where doxygen was started. If left blank the current directory will be used.

-

-OUTPUT_DIRECTORY       = ./Documentation/

-

-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create

-# 4096 sub-directories (in 2 levels) under the output directory of each output

-# format and will distribute the generated files over these directories.

-# Enabling this option can be useful when feeding doxygen a huge amount of

-# source files, where putting all generated files in the same directory would

-# otherwise cause performance problems for the file system.

-

-CREATE_SUBDIRS         = NO

-

-# The OUTPUT_LANGUAGE tag is used to specify the language in which all

-# documentation generated by doxygen is written. Doxygen will use this

-# information to generate all constant output in the proper language.

-# The default language is English, other supported languages are:

-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,

-# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,

-# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English

-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,

-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,

-# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.

-

-OUTPUT_LANGUAGE        = English

-

-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will

-# include brief member descriptions after the members that are listed in

-# the file and class documentation (similar to JavaDoc).

-# Set to NO to disable this.

-

-BRIEF_MEMBER_DESC      = YES

-

-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend

-# the brief description of a member or function before the detailed description.

-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the

-# brief descriptions will be completely suppressed.

-

-REPEAT_BRIEF           = YES

-

-# This tag implements a quasi-intelligent brief description abbreviator

-# that is used to form the text in various listings. Each string

-# in this list, if found as the leading text of the brief description, will be

-# stripped from the text and the result after processing the whole list, is

-# used as the annotated text. Otherwise, the brief description is used as-is.

-# If left blank, the following values are used ("$name" is automatically

-# replaced with the name of the entity): "The $name class" "The $name widget"

-# "The $name file" "is" "provides" "specifies" "contains"

-# "represents" "a" "an" "the"

-

-ABBREVIATE_BRIEF       = "The $name class" \

-                         "The $name widget" \

-                         "The $name file" \

-                         is \

-                         provides \

-                         specifies \

-                         contains \

-                         represents \

-                         a \

-                         an \

-                         the

-

-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then

-# Doxygen will generate a detailed section even if there is only a brief

-# description.

-

-ALWAYS_DETAILED_SEC    = NO

-

-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all

-# inherited members of a class in the documentation of that class as if those

-# members were ordinary class members. Constructors, destructors and assignment

-# operators of the base classes will not be shown.

-

-INLINE_INHERITED_MEMB  = NO

-

-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full

-# path before files name in the file list and in the header files. If set

-# to NO the shortest path that makes the file name unique will be used.

-

-FULL_PATH_NAMES        = YES

-

-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag

-# can be used to strip a user-defined part of the path. Stripping is

-# only done if one of the specified strings matches the left-hand part of

-# the path. The tag can be used to show relative paths in the file list.

-# If left blank the directory from which doxygen is run is used as the

-# path to strip.

-

-STRIP_FROM_PATH        =

-

-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of

-# the path mentioned in the documentation of a class, which tells

-# the reader which header file to include in order to use a class.

-# If left blank only the name of the header file containing the class

-# definition is used. Otherwise one should specify the include paths that

-# are normally passed to the compiler using the -I flag.

-

-STRIP_FROM_INC_PATH    =

-

-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter

-# (but less readable) file names. This can be useful is your file systems

-# doesn't support long names like on DOS, Mac, or CD-ROM.

-

-SHORT_NAMES            = YES

-

-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen

-# will interpret the first line (until the first dot) of a JavaDoc-style

-# comment as the brief description. If set to NO, the JavaDoc

-# comments will behave just like regular Qt-style comments

-# (thus requiring an explicit @brief command for a brief description.)

-

-JAVADOC_AUTOBRIEF      = NO

-

-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will

-# interpret the first line (until the first dot) of a Qt-style

-# comment as the brief description. If set to NO, the comments

-# will behave just like regular Qt-style comments (thus requiring

-# an explicit \brief command for a brief description.)

-

-QT_AUTOBRIEF           = NO

-

-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen

-# treat a multi-line C++ special comment block (i.e. a block of //! or ///

-# comments) as a brief description. This used to be the default behaviour.

-# The new default is to treat a multi-line C++ comment block as a detailed

-# description. Set this tag to YES if you prefer the old behaviour instead.

-

-MULTILINE_CPP_IS_BRIEF = NO

-

-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented

-# member inherits the documentation from any documented member that it

-# re-implements.

-

-INHERIT_DOCS           = YES

-

-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce

-# a new page for each member. If set to NO, the documentation of a member will

-# be part of the file/class/namespace that contains it.

-

-SEPARATE_MEMBER_PAGES  = NO

-

-# The TAB_SIZE tag can be used to set the number of spaces in a tab.

-# Doxygen uses this value to replace tabs by spaces in code fragments.

-

-TAB_SIZE               = 4

-

-# This tag can be used to specify a number of aliases that acts

-# as commands in the documentation. An alias has the form "name=value".

-# For example adding "sideeffect=\par Side Effects:\n" will allow you to

-# put the command \sideeffect (or @sideeffect) in the documentation, which

-# will result in a user-defined paragraph with heading "Side Effects:".

-# You can put \n's in the value part of an alias to insert newlines.

-

-ALIASES                =

-

-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C

-# sources only. Doxygen will then generate output that is more tailored for C.

-# For instance, some of the names that are used will be different. The list

-# of all members will be omitted, etc.

-

-OPTIMIZE_OUTPUT_FOR_C  = YES

-

-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java

-# sources only. Doxygen will then generate output that is more tailored for

-# Java. For instance, namespaces will be presented as packages, qualified

-# scopes will look different, etc.

-

-OPTIMIZE_OUTPUT_JAVA   = NO

-

-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran

-# sources only. Doxygen will then generate output that is more tailored for

-# Fortran.

-

-OPTIMIZE_FOR_FORTRAN   = NO

-

-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL

-# sources. Doxygen will then generate output that is tailored for

-# VHDL.

-

-OPTIMIZE_OUTPUT_VHDL   = NO

-

-# Doxygen selects the parser to use depending on the extension of the files it parses.

-# With this tag you can assign which parser to use for a given extension.

-# Doxygen has a built-in mapping, but you can override or extend it using this tag.

-# The format is ext=language, where ext is a file extension, and language is one of

-# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,

-# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat

-# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),

-# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.

-

-EXTENSION_MAPPING      =

-

-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want

-# to include (a tag file for) the STL sources as input, then you should

-# set this tag to YES in order to let doxygen match functions declarations and

-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.

-# func(std::string) {}). This also make the inheritance and collaboration

-# diagrams that involve STL classes more complete and accurate.

-

-BUILTIN_STL_SUPPORT    = NO

-

-# If you use Microsoft's C++/CLI language, you should set this option to YES to

-# enable parsing support.

-

-CPP_CLI_SUPPORT        = NO

-

-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.

-# Doxygen will parse them like normal C++ but will assume all classes use public

-# instead of private inheritance when no explicit protection keyword is present.

-

-SIP_SUPPORT            = NO

-

-# For Microsoft's IDL there are propget and propput attributes to indicate getter

-# and setter methods for a property. Setting this option to YES (the default)

-# will make doxygen to replace the get and set methods by a property in the

-# documentation. This will only work if the methods are indeed getting or

-# setting a simple type. If this is not the case, or you want to show the

-# methods anyway, you should set this option to NO.

-

-IDL_PROPERTY_SUPPORT   = YES

-

-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC

-# tag is set to YES, then doxygen will reuse the documentation of the first

-# member in the group (if any) for the other members of the group. By default

-# all members of a group must be documented explicitly.

-

-DISTRIBUTE_GROUP_DOC   = NO

-

-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of

-# the same type (for instance a group of public functions) to be put as a

-# subgroup of that type (e.g. under the Public Functions section). Set it to

-# NO to prevent subgrouping. Alternatively, this can be done per class using

-# the \nosubgrouping command.

-

-SUBGROUPING            = YES

-

-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum

-# is documented as struct, union, or enum with the name of the typedef. So

-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct

-# with name TypeT. When disabled the typedef will appear as a member of a file,

-# namespace, or class. And the struct will be named TypeS. This can typically

-# be useful for C code in case the coding convention dictates that all compound

-# types are typedef'ed and only the typedef is referenced, never the tag name.

-

-TYPEDEF_HIDES_STRUCT   = NO

-

-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to

-# determine which symbols to keep in memory and which to flush to disk.

-# When the cache is full, less often used symbols will be written to disk.

-# For small to medium size projects (<1000 input files) the default value is

-# probably good enough. For larger projects a too small cache size can cause

-# doxygen to be busy swapping symbols to and from disk most of the time

-# causing a significant performance penality.

-# If the system has enough physical memory increasing the cache will improve the

-# performance by keeping more symbols in memory. Note that the value works on

-# a logarithmic scale so increasing the size by one will rougly double the

-# memory usage. The cache size is given by this formula:

-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,

-# corresponding to a cache size of 2^16 = 65536 symbols

-

-SYMBOL_CACHE_SIZE      = 0

-

-#---------------------------------------------------------------------------

-# Build related configuration options

-#---------------------------------------------------------------------------

-

-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in

-# documentation are documented, even if no documentation was available.

-# Private class members and static file members will be hidden unless

-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

-

-EXTRACT_ALL            = YES

-

-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class

-# will be included in the documentation.

-

-EXTRACT_PRIVATE        = YES

-

-# If the EXTRACT_STATIC tag is set to YES all static members of a file

-# will be included in the documentation.

-

-EXTRACT_STATIC         = YES

-

-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)

-# defined locally in source files will be included in the documentation.

-# If set to NO only classes defined in header files are included.

-

-EXTRACT_LOCAL_CLASSES  = YES

-

-# This flag is only useful for Objective-C code. When set to YES local

-# methods, which are defined in the implementation section but not in

-# the interface are included in the documentation.

-# If set to NO (the default) only methods in the interface are included.

-

-EXTRACT_LOCAL_METHODS  = NO

-

-# If this flag is set to YES, the members of anonymous namespaces will be

-# extracted and appear in the documentation as a namespace called

-# 'anonymous_namespace{file}', where file will be replaced with the base

-# name of the file that contains the anonymous namespace. By default

-# anonymous namespace are hidden.

-

-EXTRACT_ANON_NSPACES   = NO

-

-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all

-# undocumented members of documented classes, files or namespaces.

-# If set to NO (the default) these members will be included in the

-# various overviews, but no documentation section is generated.

-# This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_MEMBERS     = NO

-

-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all

-# undocumented classes that are normally visible in the class hierarchy.

-# If set to NO (the default) these classes will be included in the various

-# overviews. This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_CLASSES     = NO

-

-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all

-# friend (class|struct|union) declarations.

-# If set to NO (the default) these declarations will be included in the

-# documentation.

-

-HIDE_FRIEND_COMPOUNDS  = NO

-

-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any

-# documentation blocks found inside the body of a function.

-# If set to NO (the default) these blocks will be appended to the

-# function's detailed documentation block.

-

-HIDE_IN_BODY_DOCS      = NO

-

-# The INTERNAL_DOCS tag determines if documentation

-# that is typed after a \internal command is included. If the tag is set

-# to NO (the default) then the documentation will be excluded.

-# Set it to YES to include the internal documentation.

-

-INTERNAL_DOCS          = NO

-

-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate

-# file names in lower-case letters. If set to YES upper-case letters are also

-# allowed. This is useful if you have classes or files whose names only differ

-# in case and if your file system supports case sensitive file names. Windows

-# and Mac users are advised to set this option to NO.

-

-CASE_SENSE_NAMES       = NO

-

-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen

-# will show members with their full class and namespace scopes in the

-# documentation. If set to YES the scope will be hidden.

-

-HIDE_SCOPE_NAMES       = NO

-

-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen

-# will put a list of the files that are included by a file in the documentation

-# of that file.

-

-SHOW_INCLUDE_FILES     = YES

-

-# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen

-# will list include files with double quotes in the documentation

-# rather than with sharp brackets.

-

-FORCE_LOCAL_INCLUDES   = NO

-

-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]

-# is inserted in the documentation for inline members.

-

-INLINE_INFO            = YES

-

-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen

-# will sort the (detailed) documentation of file and class members

-# alphabetically by member name. If set to NO the members will appear in

-# declaration order.

-

-SORT_MEMBER_DOCS       = YES

-

-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the

-# brief documentation of file, namespace and class members alphabetically

-# by member name. If set to NO (the default) the members will appear in

-# declaration order.

-

-SORT_BRIEF_DOCS        = NO

-

-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.

-

-SORT_MEMBERS_CTORS_1ST = NO

-

-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the

-# hierarchy of group names into alphabetical order. If set to NO (the default)

-# the group names will appear in their defined order.

-

-SORT_GROUP_NAMES       = NO

-

-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be

-# sorted by fully-qualified names, including namespaces. If set to

-# NO (the default), the class list will be sorted only by class name,

-# not including the namespace part.

-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.

-# Note: This option applies only to the class list, not to the

-# alphabetical list.

-

-SORT_BY_SCOPE_NAME     = NO

-

-# The GENERATE_TODOLIST tag can be used to enable (YES) or

-# disable (NO) the todo list. This list is created by putting \todo

-# commands in the documentation.

-

-GENERATE_TODOLIST      = NO

-

-# The GENERATE_TESTLIST tag can be used to enable (YES) or

-# disable (NO) the test list. This list is created by putting \test

-# commands in the documentation.

-

-GENERATE_TESTLIST      = NO

-

-# The GENERATE_BUGLIST tag can be used to enable (YES) or

-# disable (NO) the bug list. This list is created by putting \bug

-# commands in the documentation.

-

-GENERATE_BUGLIST       = NO

-

-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or

-# disable (NO) the deprecated list. This list is created by putting

-# \deprecated commands in the documentation.

-

-GENERATE_DEPRECATEDLIST= YES

-

-# The ENABLED_SECTIONS tag can be used to enable conditional

-# documentation sections, marked by \if sectionname ... \endif.

-

-ENABLED_SECTIONS       =

-

-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines

-# the initial value of a variable or define consists of for it to appear in

-# the documentation. If the initializer consists of more lines than specified

-# here it will be hidden. Use a value of 0 to hide initializers completely.

-# The appearance of the initializer of individual variables and defines in the

-# documentation can be controlled using \showinitializer or \hideinitializer

-# command in the documentation regardless of this setting.

-

-MAX_INITIALIZER_LINES  = 30

-

-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated

-# at the bottom of the documentation of classes and structs. If set to YES the

-# list will mention the files that were used to generate the documentation.

-

-SHOW_USED_FILES        = YES

-

-# If the sources in your project are distributed over multiple directories

-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy

-# in the documentation. The default is NO.

-

-SHOW_DIRECTORIES       = YES

-

-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.

-# This will remove the Files entry from the Quick Index and from the

-# Folder Tree View (if specified). The default is YES.

-

-SHOW_FILES             = YES

-

-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the

-# Namespaces page.

-# This will remove the Namespaces entry from the Quick Index

-# and from the Folder Tree View (if specified). The default is YES.

-

-SHOW_NAMESPACES        = YES

-

-# The FILE_VERSION_FILTER tag can be used to specify a program or script that

-# doxygen should invoke to get the current version for each file (typically from

-# the version control system). Doxygen will invoke the program by executing (via

-# popen()) the command <command> <input-file>, where <command> is the value of

-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file

-# provided by doxygen. Whatever the program writes to standard output

-# is used as the file version. See the manual for examples.

-

-FILE_VERSION_FILTER    =

-

-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by

-# doxygen. The layout file controls the global structure of the generated output files

-# in an output format independent way. The create the layout file that represents

-# doxygen's defaults, run doxygen with the -l option. You can optionally specify a

-# file name after the option, if omitted DoxygenLayout.xml will be used as the name

-# of the layout file.

-

-LAYOUT_FILE            =

-

-#---------------------------------------------------------------------------

-# configuration options related to warning and progress messages

-#---------------------------------------------------------------------------

-

-# The QUIET tag can be used to turn on/off the messages that are generated

-# by doxygen. Possible values are YES and NO. If left blank NO is used.

-

-QUIET                  = YES

-

-# The WARNINGS tag can be used to turn on/off the warning messages that are

-# generated by doxygen. Possible values are YES and NO. If left blank

-# NO is used.

-

-WARNINGS               = YES

-

-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings

-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will

-# automatically be disabled.

-

-WARN_IF_UNDOCUMENTED   = YES

-

-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for

-# potential errors in the documentation, such as not documenting some

-# parameters in a documented function, or documenting parameters that

-# don't exist or using markup commands wrongly.

-

-WARN_IF_DOC_ERROR      = YES

-

-# This WARN_NO_PARAMDOC option can be abled to get warnings for

-# functions that are documented, but have no documentation for their parameters

-# or return value. If set to NO (the default) doxygen will only warn about

-# wrong or incomplete parameter documentation, but not about the absence of

-# documentation.

-

-WARN_NO_PARAMDOC       = YES

-

-# The WARN_FORMAT tag determines the format of the warning messages that

-# doxygen can produce. The string should contain the $file, $line, and $text

-# tags, which will be replaced by the file and line number from which the

-# warning originated and the warning text. Optionally the format may contain

-# $version, which will be replaced by the version of the file (if it could

-# be obtained via FILE_VERSION_FILTER)

-

-WARN_FORMAT            = "$file:$line: $text"

-

-# The WARN_LOGFILE tag can be used to specify a file to which warning

-# and error messages should be written. If left blank the output is written

-# to stderr.

-

-WARN_LOGFILE           =

-

-#---------------------------------------------------------------------------

-# configuration options related to the input files

-#---------------------------------------------------------------------------

-

-# The INPUT tag can be used to specify the files and/or directories that contain

-# documented source files. You may enter file names like "myfile.cpp" or

-# directories like "/usr/src/myproject". Separate the files or directories

-# with spaces.

-

-INPUT                  = ./

-

-# This tag can be used to specify the character encoding of the source files

-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is

-# also the default input encoding. Doxygen uses libiconv (or the iconv built

-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for

-# the list of possible encodings.

-

-INPUT_ENCODING         = UTF-8

-

-# If the value of the INPUT tag contains directories, you can use the

-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank the following patterns are tested:

-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx

-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90

-

-FILE_PATTERNS          = *.h \

-                         *.c \

-                         *.txt

-

-# The RECURSIVE tag can be used to turn specify whether or not subdirectories

-# should be searched for input files as well. Possible values are YES and NO.

-# If left blank NO is used.

-

-RECURSIVE              = YES

-

-# The EXCLUDE tag can be used to specify files and/or directories that should

-# excluded from the INPUT source files. This way you can easily exclude a

-# subdirectory from a directory tree whose root is specified with the INPUT tag.

-

-EXCLUDE                = Documentation/

-

-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or

-# directories that are symbolic links (a Unix filesystem feature) are excluded

-# from the input.

-

-EXCLUDE_SYMLINKS       = NO

-

-# If the value of the INPUT tag contains directories, you can use the

-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude

-# certain files from those directories. Note that the wildcards are matched

-# against the file with absolute path, so to exclude all test directories

-# for example use the pattern */test/*

-

-EXCLUDE_PATTERNS       = 

-

-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names

-# (namespaces, classes, functions, etc.) that should be excluded from the

-# output. The symbol name can be a fully qualified name, a word, or if the

-# wildcard * is used, a substring. Examples: ANamespace, AClass,

-# AClass::ANamespace, ANamespace::*Test

-

-EXCLUDE_SYMBOLS        = __* \

-                         INCLUDE_FROM_*

-

-# The EXAMPLE_PATH tag can be used to specify one or more files or

-# directories that contain example code fragments that are included (see

-# the \include command).

-

-EXAMPLE_PATH           =

-

-# If the value of the EXAMPLE_PATH tag contains directories, you can use the

-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank all files are included.

-

-EXAMPLE_PATTERNS       = *

-

-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be

-# searched for input files to be used with the \include or \dontinclude

-# commands irrespective of the value of the RECURSIVE tag.

-# Possible values are YES and NO. If left blank NO is used.

-

-EXAMPLE_RECURSIVE      = NO

-

-# The IMAGE_PATH tag can be used to specify one or more files or

-# directories that contain image that are included in the documentation (see

-# the \image command).

-

-IMAGE_PATH             =

-

-# The INPUT_FILTER tag can be used to specify a program that doxygen should

-# invoke to filter for each input file. Doxygen will invoke the filter program

-# by executing (via popen()) the command <filter> <input-file>, where <filter>

-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an

-# input file. Doxygen will then use the output that the filter program writes

-# to standard output.

-# If FILTER_PATTERNS is specified, this tag will be

-# ignored.

-

-INPUT_FILTER           =

-

-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern

-# basis.

-# Doxygen will compare the file name with each pattern and apply the

-# filter if there is a match.

-# The filters are a list of the form:

-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further

-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER

-# is applied to all files.

-

-FILTER_PATTERNS        =

-

-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using

-# INPUT_FILTER) will be used to filter the input files when producing source

-# files to browse (i.e. when SOURCE_BROWSER is set to YES).

-

-FILTER_SOURCE_FILES    = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to source browsing

-#---------------------------------------------------------------------------

-

-# If the SOURCE_BROWSER tag is set to YES then a list of source files will

-# be generated. Documented entities will be cross-referenced with these sources.

-# Note: To get rid of all source code in the generated output, make sure also

-# VERBATIM_HEADERS is set to NO.

-

-SOURCE_BROWSER         = NO

-

-# Setting the INLINE_SOURCES tag to YES will include the body

-# of functions and classes directly in the documentation.

-

-INLINE_SOURCES         = NO

-

-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct

-# doxygen to hide any special comment blocks from generated source code

-# fragments. Normal C and C++ comments will always remain visible.

-

-STRIP_CODE_COMMENTS    = YES

-

-# If the REFERENCED_BY_RELATION tag is set to YES

-# then for each documented function all documented

-# functions referencing it will be listed.

-

-REFERENCED_BY_RELATION = NO

-

-# If the REFERENCES_RELATION tag is set to YES

-# then for each documented function all documented entities

-# called/used by that function will be listed.

-

-REFERENCES_RELATION    = NO

-

-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)

-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from

-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will

-# link to the source code.

-# Otherwise they will link to the documentation.

-

-REFERENCES_LINK_SOURCE = NO

-

-# If the USE_HTAGS tag is set to YES then the references to source code

-# will point to the HTML generated by the htags(1) tool instead of doxygen

-# built-in source browser. The htags tool is part of GNU's global source

-# tagging system (see http://www.gnu.org/software/global/global.html). You

-# will need version 4.8.6 or higher.

-

-USE_HTAGS              = NO

-

-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen

-# will generate a verbatim copy of the header file for each class for

-# which an include is specified. Set to NO to disable this.

-

-VERBATIM_HEADERS       = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the alphabetical class index

-#---------------------------------------------------------------------------

-

-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index

-# of all compounds will be generated. Enable this if the project

-# contains a lot of classes, structs, unions or interfaces.

-

-ALPHABETICAL_INDEX     = YES

-

-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then

-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns

-# in which this list will be split (can be a number in the range [1..20])

-

-COLS_IN_ALPHA_INDEX    = 5

-

-# In case all classes in a project start with a common prefix, all

-# classes will be put under the same header in the alphabetical index.

-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that

-# should be ignored while generating the index headers.

-

-IGNORE_PREFIX          =

-

-#---------------------------------------------------------------------------

-# configuration options related to the HTML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will

-# generate HTML output.

-

-GENERATE_HTML          = YES

-

-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `html' will be used as the default path.

-

-HTML_OUTPUT            = html

-

-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for

-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank

-# doxygen will generate files with .html extension.

-

-HTML_FILE_EXTENSION    = .html

-

-# The HTML_HEADER tag can be used to specify a personal HTML header for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard header.

-

-HTML_HEADER            =

-

-# The HTML_FOOTER tag can be used to specify a personal HTML footer for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard footer.

-

-HTML_FOOTER            =

-

-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading

-# style sheet that is used by each HTML page. It can be used to

-# fine-tune the look of the HTML output. If the tag is left blank doxygen

-# will generate a default style sheet. Note that doxygen will try to copy

-# the style sheet file to the HTML output directory, so don't put your own

-# stylesheet in the HTML output directory as well, or it will be erased!

-

-HTML_STYLESHEET        =

-

-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML

-# page will contain the date and time when the page was generated. Setting

-# this to NO can help when comparing the output of multiple runs.

-

-HTML_TIMESTAMP         = NO

-

-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,

-# files or namespaces will be aligned in HTML using tables. If set to

-# NO a bullet list will be used.

-

-HTML_ALIGN_MEMBERS     = YES

-

-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML

-# documentation will contain sections that can be hidden and shown after the

-# page has loaded. For this to work a browser that supports

-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox

-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).

-

-HTML_DYNAMIC_SECTIONS  = YES

-

-# If the GENERATE_DOCSET tag is set to YES, additional index files

-# will be generated that can be used as input for Apple's Xcode 3

-# integrated development environment, introduced with OSX 10.5 (Leopard).

-# To create a documentation set, doxygen will generate a Makefile in the

-# HTML output directory. Running make will produce the docset in that

-# directory and running "make install" will install the docset in

-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find

-# it at startup.

-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.

-

-GENERATE_DOCSET        = NO

-

-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the

-# feed. A documentation feed provides an umbrella under which multiple

-# documentation sets from a single provider (such as a company or product suite)

-# can be grouped.

-

-DOCSET_FEEDNAME        = "Doxygen generated docs"

-

-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that

-# should uniquely identify the documentation set bundle. This should be a

-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen

-# will append .docset to the name.

-

-DOCSET_BUNDLE_ID       = org.doxygen.Project

-

-# If the GENERATE_HTMLHELP tag is set to YES, additional index files

-# will be generated that can be used as input for tools like the

-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)

-# of the generated HTML documentation.

-

-GENERATE_HTMLHELP      = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can

-# be used to specify the file name of the resulting .chm file. You

-# can add a path in front of the file if the result should not be

-# written to the html output directory.

-

-CHM_FILE               =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can

-# be used to specify the location (absolute path including file name) of

-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run

-# the HTML help compiler on the generated index.hhp.

-

-HHC_LOCATION           =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag

-# controls if a separate .chi index file is generated (YES) or that

-# it should be included in the master .chm file (NO).

-

-GENERATE_CHI           = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING

-# is used to encode HtmlHelp index (hhk), content (hhc) and project file

-# content.

-

-CHM_INDEX_ENCODING     =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag

-# controls whether a binary table of contents is generated (YES) or a

-# normal table of contents (NO) in the .chm file.

-

-BINARY_TOC             = NO

-

-# The TOC_EXPAND flag can be set to YES to add extra items for group members

-# to the contents of the HTML help documentation and to the tree view.

-

-TOC_EXPAND             = YES

-

-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER

-# are set, an additional index file will be generated that can be used as input for

-# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated

-# HTML documentation.

-

-GENERATE_QHP           = NO

-

-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can

-# be used to specify the file name of the resulting .qch file.

-# The path specified is relative to the HTML output folder.

-

-QCH_FILE               =

-

-# The QHP_NAMESPACE tag specifies the namespace to use when generating

-# Qt Help Project output. For more information please see

-# http://doc.trolltech.com/qthelpproject.html#namespace

-

-QHP_NAMESPACE          = org.doxygen.Project

-

-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating

-# Qt Help Project output. For more information please see

-# http://doc.trolltech.com/qthelpproject.html#virtual-folders

-

-QHP_VIRTUAL_FOLDER     = doc

-

-# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.

-# For more information please see

-# http://doc.trolltech.com/qthelpproject.html#custom-filters

-

-QHP_CUST_FILTER_NAME   =

-

-# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see

-# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.

-

-QHP_CUST_FILTER_ATTRS  =

-

-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's

-# filter section matches.

-# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.

-

-QHP_SECT_FILTER_ATTRS  =

-

-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can

-# be used to specify the location of Qt's qhelpgenerator.

-# If non-empty doxygen will try to run qhelpgenerator on the generated

-# .qhp file.

-

-QHG_LOCATION           =

-

-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files

-#  will be generated, which together with the HTML files, form an Eclipse help

-#  plugin. To install this plugin and make it available under the help contents

-# menu in Eclipse, the contents of the directory containing the HTML and XML

-# files needs to be copied into the plugins directory of eclipse. The name of

-# the directory within the plugins directory should be the same as

-# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears.

-

-GENERATE_ECLIPSEHELP   = NO

-

-# A unique identifier for the eclipse help plugin. When installing the plugin

-# the directory name containing the HTML and XML files should also have

-# this name.

-

-ECLIPSE_DOC_ID         = org.doxygen.Project

-

-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at

-# top of each HTML page. The value NO (the default) enables the index and

-# the value YES disables it.

-

-DISABLE_INDEX          = NO

-

-# This tag can be used to set the number of enum values (range [1..20])

-# that doxygen will group on one line in the generated HTML documentation.

-

-ENUM_VALUES_PER_LINE   = 1

-

-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index

-# structure should be generated to display hierarchical information.

-# If the tag value is set to YES, a side panel will be generated

-# containing a tree-like index structure (just like the one that

-# is generated for HTML Help). For this to work a browser that supports

-# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).

-# Windows users are probably better off using the HTML help feature.

-

-GENERATE_TREEVIEW      = YES

-

-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,

-# and Class Hierarchy pages using a tree view instead of an ordered list.

-

-USE_INLINE_TREES       = NO

-

-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be

-# used to set the initial width (in pixels) of the frame in which the tree

-# is shown.

-

-TREEVIEW_WIDTH         = 250

-

-# Use this tag to change the font size of Latex formulas included

-# as images in the HTML documentation. The default is 10. Note that

-# when you change the font size after a successful doxygen run you need

-# to manually remove any form_*.png images from the HTML output directory

-# to force them to be regenerated.

-

-FORMULA_FONTSIZE       = 10

-

-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript

-# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should

-# typically be disabled. For large projects the javascript based search engine

-# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.

-

-SEARCHENGINE           = NO

-

-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index

-# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup

-# and does not have live searching capabilities.

-

-SERVER_BASED_SEARCH    = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the LaTeX output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will

-# generate Latex output.

-

-GENERATE_LATEX         = NO

-

-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `latex' will be used as the default path.

-

-LATEX_OUTPUT           = latex

-

-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be

-# invoked. If left blank `latex' will be used as the default command name.

-# Note that when enabling USE_PDFLATEX this option is only used for

-# generating bitmaps for formulas in the HTML output, but not in the

-# Makefile that is written to the output directory.

-

-LATEX_CMD_NAME         = latex

-

-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to

-# generate index for LaTeX. If left blank `makeindex' will be used as the

-# default command name.

-

-MAKEINDEX_CMD_NAME     = makeindex

-

-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact

-# LaTeX documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_LATEX          = NO

-

-# The PAPER_TYPE tag can be used to set the paper type that is used

-# by the printer. Possible values are: a4, a4wide, letter, legal and

-# executive. If left blank a4wide will be used.

-

-PAPER_TYPE             = a4wide

-

-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX

-# packages that should be included in the LaTeX output.

-

-EXTRA_PACKAGES         =

-

-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for

-# the generated latex document. The header should contain everything until

-# the first chapter. If it is left blank doxygen will generate a

-# standard header. Notice: only use this tag if you know what you are doing!

-

-LATEX_HEADER           =

-

-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated

-# is prepared for conversion to pdf (using ps2pdf). The pdf file will

-# contain links (just like the HTML output) instead of page references

-# This makes the output suitable for online browsing using a pdf viewer.

-

-PDF_HYPERLINKS         = YES

-

-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of

-# plain latex in the generated Makefile. Set this option to YES to get a

-# higher quality PDF documentation.

-

-USE_PDFLATEX           = YES

-

-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.

-# command to the generated LaTeX files. This will instruct LaTeX to keep

-# running if errors occur, instead of asking the user for help.

-# This option is also used when generating formulas in HTML.

-

-LATEX_BATCHMODE        = NO

-

-# If LATEX_HIDE_INDICES is set to YES then doxygen will not

-# include the index chapters (such as File Index, Compound Index, etc.)

-# in the output.

-

-LATEX_HIDE_INDICES     = NO

-

-# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.

-

-LATEX_SOURCE_CODE      = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the RTF output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output

-# The RTF output is optimized for Word 97 and may not look very pretty with

-# other RTF readers or editors.

-

-GENERATE_RTF           = NO

-

-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `rtf' will be used as the default path.

-

-RTF_OUTPUT             = rtf

-

-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact

-# RTF documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_RTF            = NO

-

-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated

-# will contain hyperlink fields. The RTF file will

-# contain links (just like the HTML output) instead of page references.

-# This makes the output suitable for online browsing using WORD or other

-# programs which support those fields.

-# Note: wordpad (write) and others do not support links.

-

-RTF_HYPERLINKS         = NO

-

-# Load stylesheet definitions from file. Syntax is similar to doxygen's

-# config file, i.e. a series of assignments. You only have to provide

-# replacements, missing definitions are set to their default value.

-

-RTF_STYLESHEET_FILE    =

-

-# Set optional variables used in the generation of an rtf document.

-# Syntax is similar to doxygen's config file.

-

-RTF_EXTENSIONS_FILE    =

-

-#---------------------------------------------------------------------------

-# configuration options related to the man page output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will

-# generate man pages

-

-GENERATE_MAN           = NO

-

-# The MAN_OUTPUT tag is used to specify where the man pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `man' will be used as the default path.

-

-MAN_OUTPUT             = man

-

-# The MAN_EXTENSION tag determines the extension that is added to

-# the generated man pages (default is the subroutine's section .3)

-

-MAN_EXTENSION          = .3

-

-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,

-# then it will generate one additional man file for each entity

-# documented in the real man page(s). These additional files

-# only source the real man page, but without them the man command

-# would be unable to find the correct page. The default is NO.

-

-MAN_LINKS              = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the XML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_XML tag is set to YES Doxygen will

-# generate an XML file that captures the structure of

-# the code including all documentation.

-

-GENERATE_XML           = NO

-

-# The XML_OUTPUT tag is used to specify where the XML pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `xml' will be used as the default path.

-

-XML_OUTPUT             = xml

-

-# The XML_SCHEMA tag can be used to specify an XML schema,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_SCHEMA             =

-

-# The XML_DTD tag can be used to specify an XML DTD,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_DTD                =

-

-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will

-# dump the program listings (including syntax highlighting

-# and cross-referencing information) to the XML output. Note that

-# enabling this will significantly increase the size of the XML output.

-

-XML_PROGRAMLISTING     = YES

-

-#---------------------------------------------------------------------------

-# configuration options for the AutoGen Definitions output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will

-# generate an AutoGen Definitions (see autogen.sf.net) file

-# that captures the structure of the code including all

-# documentation. Note that this feature is still experimental

-# and incomplete at the moment.

-

-GENERATE_AUTOGEN_DEF   = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the Perl module output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_PERLMOD tag is set to YES Doxygen will

-# generate a Perl module file that captures the structure of

-# the code including all documentation. Note that this

-# feature is still experimental and incomplete at the

-# moment.

-

-GENERATE_PERLMOD       = NO

-

-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate

-# the necessary Makefile rules, Perl scripts and LaTeX code to be able

-# to generate PDF and DVI output from the Perl module output.

-

-PERLMOD_LATEX          = NO

-

-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be

-# nicely formatted so it can be parsed by a human reader.

-# This is useful

-# if you want to understand what is going on.

-# On the other hand, if this

-# tag is set to NO the size of the Perl module output will be much smaller

-# and Perl will parse it just the same.

-

-PERLMOD_PRETTY         = YES

-

-# The names of the make variables in the generated doxyrules.make file

-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.

-# This is useful so different doxyrules.make files included by the same

-# Makefile don't overwrite each other's variables.

-

-PERLMOD_MAKEVAR_PREFIX =

-

-#---------------------------------------------------------------------------

-# Configuration options related to the preprocessor

-#---------------------------------------------------------------------------

-

-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will

-# evaluate all C-preprocessor directives found in the sources and include

-# files.

-

-ENABLE_PREPROCESSING   = YES

-

-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro

-# names in the source code. If set to NO (the default) only conditional

-# compilation will be performed. Macro expansion can be done in a controlled

-# way by setting EXPAND_ONLY_PREDEF to YES.

-

-MACRO_EXPANSION        = YES

-

-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES

-# then the macro expansion is limited to the macros specified with the

-# PREDEFINED and EXPAND_AS_DEFINED tags.

-

-EXPAND_ONLY_PREDEF     = YES

-

-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files

-# in the INCLUDE_PATH (see below) will be search if a #include is found.

-

-SEARCH_INCLUDES        = YES

-

-# The INCLUDE_PATH tag can be used to specify one or more directories that

-# contain include files that are not input files but should be processed by

-# the preprocessor.

-

-INCLUDE_PATH           =

-

-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard

-# patterns (like *.h and *.hpp) to filter out the header-files in the

-# directories. If left blank, the patterns specified with FILE_PATTERNS will

-# be used.

-

-INCLUDE_FILE_PATTERNS  =

-

-# The PREDEFINED tag can be used to specify one or more macro names that

-# are defined before the preprocessor is started (similar to the -D option of

-# gcc). The argument of the tag is a list of macros of the form: name

-# or name=definition (no spaces). If the definition and the = are

-# omitted =1 is assumed. To prevent a macro definition from being

-# undefined via #undef or recursively expanded use the := operator

-# instead of the = operator.

-

-PREDEFINED             = __DOXYGEN__ \

-                         PROGMEM

-

-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then

-# this tag can be used to specify a list of macro names that should be expanded.

-# The macro definition that is found in the sources will be used.

-# Use the PREDEFINED tag if you want to use a different macro definition.

-

-EXPAND_AS_DEFINED      = 

-

-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then

-# doxygen's preprocessor will remove all function-like macros that are alone

-# on a line, have an all uppercase name, and do not end with a semicolon. Such

-# function macros are typically used for boiler-plate code, and will confuse

-# the parser if not removed.

-

-SKIP_FUNCTION_MACROS   = YES

-

-#---------------------------------------------------------------------------

-# Configuration::additions related to external references

-#---------------------------------------------------------------------------

-

-# The TAGFILES option can be used to specify one or more tagfiles.

-# Optionally an initial location of the external documentation

-# can be added for each tagfile. The format of a tag file without

-# this location is as follows:

-#

-# TAGFILES = file1 file2 ...

-# Adding location for the tag files is done as follows:

-#

-# TAGFILES = file1=loc1 "file2 = loc2" ...

-# where "loc1" and "loc2" can be relative or absolute paths or

-# URLs. If a location is present for each tag, the installdox tool

-# does not have to be run to correct the links.

-# Note that each tag file must have a unique name

-# (where the name does NOT include the path)

-# If a tag file is not located in the directory in which doxygen

-# is run, you must also specify the path to the tagfile here.

-

-TAGFILES               =

-

-# When a file name is specified after GENERATE_TAGFILE, doxygen will create

-# a tag file that is based on the input files it reads.

-

-GENERATE_TAGFILE       =

-

-# If the ALLEXTERNALS tag is set to YES all external classes will be listed

-# in the class index. If set to NO only the inherited external classes

-# will be listed.

-

-ALLEXTERNALS           = NO

-

-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed

-# in the modules index. If set to NO, only the current project's groups will

-# be listed.

-

-EXTERNAL_GROUPS        = YES

-

-# The PERL_PATH should be the absolute path and name of the perl script

-# interpreter (i.e. the result of `which perl').

-

-PERL_PATH              = /usr/bin/perl

-

-#---------------------------------------------------------------------------

-# Configuration options related to the dot tool

-#---------------------------------------------------------------------------

-

-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will

-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base

-# or super classes. Setting the tag to NO turns the diagrams off. Note that

-# this option is superseded by the HAVE_DOT option below. This is only a

-# fallback. It is recommended to install and use dot, since it yields more

-# powerful graphs.

-

-CLASS_DIAGRAMS         = NO

-

-# You can define message sequence charts within doxygen comments using the \msc

-# command. Doxygen will then run the mscgen tool (see

-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the

-# documentation. The MSCGEN_PATH tag allows you to specify the directory where

-# the mscgen tool resides. If left empty the tool is assumed to be found in the

-# default search path.

-

-MSCGEN_PATH            =

-

-# If set to YES, the inheritance and collaboration graphs will hide

-# inheritance and usage relations if the target is undocumented

-# or is not a class.

-

-HIDE_UNDOC_RELATIONS   = YES

-

-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is

-# available from the path. This tool is part of Graphviz, a graph visualization

-# toolkit from AT&T and Lucent Bell Labs. The other options in this section

-# have no effect if this option is set to NO (the default)

-

-HAVE_DOT               = NO

-

-# By default doxygen will write a font called FreeSans.ttf to the output

-# directory and reference it in all dot files that doxygen generates. This

-# font does not include all possible unicode characters however, so when you need

-# these (or just want a differently looking font) you can specify the font name

-# using DOT_FONTNAME. You need need to make sure dot is able to find the font,

-# which can be done by putting it in a standard location or by setting the

-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory

-# containing the font.

-

-DOT_FONTNAME           = FreeSans

-

-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.

-# The default size is 10pt.

-

-DOT_FONTSIZE           = 10

-

-# By default doxygen will tell dot to use the output directory to look for the

-# FreeSans.ttf font (which doxygen will put there itself). If you specify a

-# different font using DOT_FONTNAME you can set the path where dot

-# can find it using this tag.

-

-DOT_FONTPATH           =

-

-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect inheritance relations. Setting this tag to YES will force the

-# the CLASS_DIAGRAMS tag to NO.

-

-CLASS_GRAPH            = NO

-

-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect implementation dependencies (inheritance, containment, and

-# class references variables) of the class with other documented classes.

-

-COLLABORATION_GRAPH    = NO

-

-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for groups, showing the direct groups dependencies

-

-GROUP_GRAPHS           = NO

-

-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and

-# collaboration diagrams in a style similar to the OMG's Unified Modeling

-# Language.

-

-UML_LOOK               = NO

-

-# If set to YES, the inheritance and collaboration graphs will show the

-# relations between templates and their instances.

-

-TEMPLATE_RELATIONS     = NO

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT

-# tags are set to YES then doxygen will generate a graph for each documented

-# file showing the direct and indirect include dependencies of the file with

-# other documented files.

-

-INCLUDE_GRAPH          = NO

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and

-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each

-# documented header file showing the documented files that directly or

-# indirectly include this file.

-

-INCLUDED_BY_GRAPH      = NO

-

-# If the CALL_GRAPH and HAVE_DOT options are set to YES then

-# doxygen will generate a call dependency graph for every global function

-# or class method. Note that enabling this option will significantly increase

-# the time of a run. So in most cases it will be better to enable call graphs

-# for selected functions only using the \callgraph command.

-

-CALL_GRAPH             = NO

-

-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then

-# doxygen will generate a caller dependency graph for every global function

-# or class method. Note that enabling this option will significantly increase

-# the time of a run. So in most cases it will be better to enable caller

-# graphs for selected functions only using the \callergraph command.

-

-CALLER_GRAPH           = NO

-

-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen

-# will graphical hierarchy of all classes instead of a textual one.

-

-GRAPHICAL_HIERARCHY    = NO

-

-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES

-# then doxygen will show the dependencies a directory has on other directories

-# in a graphical way. The dependency relations are determined by the #include

-# relations between the files in the directories.

-

-DIRECTORY_GRAPH        = NO

-

-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images

-# generated by dot. Possible values are png, jpg, or gif

-# If left blank png will be used.

-

-DOT_IMAGE_FORMAT       = png

-

-# The tag DOT_PATH can be used to specify the path where the dot tool can be

-# found. If left blank, it is assumed the dot tool can be found in the path.

-

-DOT_PATH               =

-

-# The DOTFILE_DIRS tag can be used to specify one or more directories that

-# contain dot files that are included in the documentation (see the

-# \dotfile command).

-

-DOTFILE_DIRS           =

-

-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of

-# nodes that will be shown in the graph. If the number of nodes in a graph

-# becomes larger than this value, doxygen will truncate the graph, which is

-# visualized by representing a node as a red box. Note that doxygen if the

-# number of direct children of the root node in a graph is already larger than

-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note

-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.

-

-DOT_GRAPH_MAX_NODES    = 15

-

-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the

-# graphs generated by dot. A depth value of 3 means that only nodes reachable

-# from the root by following a path via at most 3 edges will be shown. Nodes

-# that lay further from the root node will be omitted. Note that setting this

-# option to 1 or 2 may greatly reduce the computation time needed for large

-# code bases. Also note that the size of a graph can be further restricted by

-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.

-

-MAX_DOT_GRAPH_DEPTH    = 2

-

-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent

-# background. This is disabled by default, because dot on Windows does not

-# seem to support this out of the box. Warning: Depending on the platform used,

-# enabling this option may lead to badly anti-aliased labels on the edges of

-# a graph (i.e. they become hard to read).

-

-DOT_TRANSPARENT        = YES

-

-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output

-# files in one run (i.e. multiple -o and -T options on the command line). This

-# makes dot run faster, but since only newer versions of dot (>1.8.10)

-# support this, this feature is disabled by default.

-

-DOT_MULTI_TARGETS      = NO

-

-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will

-# generate a legend page explaining the meaning of the various boxes and

-# arrows in the dot generated graphs.

-

-GENERATE_LEGEND        = YES

-

-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will

-# remove the intermediate dot files that are used to generate

-# the various graphs.

-

-DOT_CLEANUP            = YES

+# Doxyfile 1.6.2
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "LUFA Library - Audio Output Host"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         = 0.0.0
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = ./Documentation/
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it parses.
+# With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this tag.
+# The format is ext=language, where ext is a file extension, and language is one of
+# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
+# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
+# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
+# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = NO
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
+# doxygen. The layout file controls the global structure of the generated output files
+# in an output format independent way. The create the layout file that represents
+# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
+# file name after the option, if omitted DoxygenLayout.xml will be used as the name
+# of the layout file.
+
+LAYOUT_FILE            =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = ./
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.h \
+                         *.c \
+                         *.txt
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                = Documentation/
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       = 
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        = __* \
+                         INCLUDE_FROM_*
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = NO
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = YES
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        =
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING     =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = YES
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
+# are set, an additional index file will be generated that can be used as input for
+# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
+# HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
+# For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+#  will be generated, which together with the HTML files, form an Eclipse help
+#  plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 1
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = YES
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             = __DOXYGEN__ \
+                         PROGMEM
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      = 
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH            =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = NO
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME           = FreeSans
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = NO
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = NO
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = NO
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = NO
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = NO
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = NO
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 15
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 2
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/Demos/Host/LowLevel/AudioOutputHost/makefile b/Demos/Host/LowLevel/AudioOutputHost/makefile
index 487c7d7e7..4a55d0747 100644
--- a/Demos/Host/LowLevel/AudioOutputHost/makefile
+++ b/Demos/Host/LowLevel/AudioOutputHost/makefile
@@ -1,717 +1,717 @@
-# Hey Emacs, this is a -*- makefile -*-

-#----------------------------------------------------------------------------

-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.

-#  >> Modified for use with the LUFA project. <<

-#

-# Released to the Public Domain

-#

-# Additional material for this makefile was written by:

-# Peter Fleury

-# Tim Henigan

-# Colin O'Flynn

-# Reiner Patommel

-# Markus Pfaff

-# Sander Pool

-# Frederik Rouleau

-# Carlos Lamas

-# Dean Camera

-# Opendous Inc.

-# Denver Gingerich

-#

-#----------------------------------------------------------------------------

-# On command line:

-#

-# make all = Make software.

-#

-# make clean = Clean out built project files.

-#

-# make coff = Convert ELF to AVR COFF.

-#

-# make extcoff = Convert ELF to AVR Extended COFF.

-#

-# make program = Download the hex file to the device, using avrdude.

-#                Please customize the avrdude settings below first!

-#

-# make dfu = Download the hex file to the device, using dfu-programmer (must

-#            have dfu-programmer installed).

-#

-# make flip = Download the hex file to the device, using Atmel FLIP (must

-#             have Atmel FLIP installed).

-#

-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

-#               (must have dfu-programmer installed).

-#

-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

-#                (must have Atmel FLIP installed).

-#

-# make doxygen = Generate DoxyGen documentation for the project (must have

-#                DoxyGen installed)

-#

-# make debug = Start either simulavr or avarice as specified for debugging,

-#              with avr-gdb or avr-insight as the front end for debugging.

-#

-# make filename.s = Just compile filename.c into the assembler code only.

-#

-# make filename.i = Create a preprocessed source file for use in submitting

-#                   bug reports to the GCC project.

-#

-# To rebuild project do "make clean" then "make all".

-#----------------------------------------------------------------------------

-

-

-# MCU name

-MCU = at90usb1287

-

-

-# Target architecture (see library "Board Types" documentation).

-ARCH = AVR8

-

-

-# Target board (see library "Board Types" documentation, NONE for projects not requiring

-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called

-# "Board" inside the application directory.

-BOARD = USBKEY

-

-

-# Processor frequency.

-#     This will define a symbol, F_CPU, in all source code files equal to the

-#     processor frequency in Hz. You can then use this symbol in your source code to

-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

-#     automatically to create a 32-bit value in your source code.

-#

-#     This will be an integer division of F_USB below, as it is sourced by

-#     F_USB after it has run through any CPU prescalers. Note that this value

-#     does not *change* the processor frequency - it should merely be updated to

-#     reflect the processor speed set externally so that the code can use accurate

-#     software delays.

-F_CPU = 8000000

-

-

-# Input clock frequency.

-#     This will define a symbol, F_USB, in all source code files equal to the

-#     input clock frequency (before any prescaling is performed) in Hz. This value may

-#     differ from F_CPU if prescaling is used on the latter, and is required as the

-#     raw input clock is fed directly to the PLL sections of the AVR for high speed

-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'

-#     at the end, this will be done automatically to create a 32-bit value in your

-#     source code.

-#

-#     If no clock division is performed on the input clock inside the AVR (via the

-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_USB = $(F_CPU)

-

-

-# Output format. (can be srec, ihex, binary)

-FORMAT = ihex

-

-

-# Target file name (without extension).

-TARGET = AudioOutputHost

-

-

-# Object files directory

-#     To put object files in current directory, use a dot (.), do NOT make

-#     this an empty or blank macro!

-OBJDIR = .

-

-

-# Path to the LUFA library

-LUFA_PATH = ../../../..

-

-

-# LUFA library compile-time options and predefined tokens

-LUFA_OPTS  = -D USB_HOST_ONLY

-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"

-

-LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL

-LUFA_OPTS += -D USE_TEST_TONE

-

-

-# Create the LUFA source path variables by including the LUFA root makefile

-include $(LUFA_PATH)/LUFA/makefile

-

-

-# List C source files here. (C dependencies are automatically generated.)

-SRC = $(TARGET).c                                                 \

-	  ConfigDescriptor.c                                          \

-	  $(LUFA_SRC_USB)                                             \

-	  $(LUFA_SRC_SERIAL)

-

-

-# List C++ source files here. (C dependencies are automatically generated.)

-CPPSRC =

-

-

-# List Assembler source files here.

-#     Make them always end in a capital .S.  Files ending in a lowercase .s

-#     will not be considered source files but generated files (assembler

-#     output from the compiler), and will be deleted upon "make clean"!

-#     Even though the DOS/Win* filesystem matches both .s and .S the same,

-#     it will preserve the spelling of the filenames, and gcc itself does

-#     care about how the name is spelled on its command-line.

-ASRC =

-

-

-# Optimization level, can be [0, 1, 2, 3, s].

-#     0 = turn off optimization. s = optimize for size.

-#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)

-OPT = s

-

-

-# Debugging format.

-#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.

-#     AVR Studio 4.10 requires dwarf-2.

-#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.

-DEBUG = dwarf-2

-

-

-# List any extra directories to look for include files here.

-#     Each directory must be seperated by a space.

-#     Use forward slashes for directory separators.

-#     For a directory that has spaces, enclose it in quotes.

-EXTRAINCDIRS = $(LUFA_PATH)/

-

-

-# Compiler flag to set the C Standard level.

-#     c89   = "ANSI" C

-#     gnu89 = c89 plus GCC extensions

-#     c99   = ISO C99 standard (not yet fully implemented)

-#     gnu99 = c99 plus GCC extensions

-CSTANDARD = -std=c99

-

-

-# Place -D or -U options here for C sources

-CDEFS  = -DF_CPU=$(F_CPU)UL

-CDEFS += -DF_USB=$(F_USB)UL

-CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)

-CDEFS += $(LUFA_OPTS)

-

-

-# Place -D or -U options here for ASM sources

-ADEFS  = -DF_CPU=$(F_CPU)

-ADEFS += -DF_USB=$(F_USB)UL

-ADEFS += -DBOARD=BOARD_$(BOARD)

-ADEFS += $(LUFA_OPTS)

-

-# Place -D or -U options here for C++ sources

-CPPDEFS  = -DF_CPU=$(F_CPU)UL

-CPPDEFS += -DF_USB=$(F_USB)UL

-CPPDEFS += -DBOARD=BOARD_$(BOARD)

-CPPDEFS += $(LUFA_OPTS)

-#CPPDEFS += -D__STDC_LIMIT_MACROS

-#CPPDEFS += -D__STDC_CONSTANT_MACROS

-

-

-

-#---------------- Compiler Options C ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CFLAGS = -g$(DEBUG)

-CFLAGS += $(CDEFS)

-CFLAGS += -O$(OPT)

-CFLAGS += -funsigned-char

-CFLAGS += -funsigned-bitfields

-CFLAGS += -ffunction-sections

-CFLAGS += -fno-inline-small-functions

-CFLAGS += -fpack-struct

-CFLAGS += -fshort-enums

-CFLAGS += -fno-strict-aliasing

-CFLAGS += -Wall

-CFLAGS += -Wstrict-prototypes

-#CFLAGS += -mshort-calls

-#CFLAGS += -fno-unit-at-a-time

-#CFLAGS += -Wundef

-#CFLAGS += -Wunreachable-code

-#CFLAGS += -Wsign-compare

-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-CFLAGS += $(CSTANDARD)

-

-

-#---------------- Compiler Options C++ ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CPPFLAGS = -g$(DEBUG)

-CPPFLAGS += $(CPPDEFS)

-CPPFLAGS += -O$(OPT)

-CPPFLAGS += -funsigned-char

-CPPFLAGS += -funsigned-bitfields

-CPPFLAGS += -fpack-struct

-CPPFLAGS += -fshort-enums

-CPPFLAGS += -fno-exceptions

-CPPFLAGS += -Wall

-CPPFLAGS += -Wundef

-#CPPFLAGS += -mshort-calls

-#CPPFLAGS += -fno-unit-at-a-time

-#CPPFLAGS += -Wstrict-prototypes

-#CPPFLAGS += -Wunreachable-code

-#CPPFLAGS += -Wsign-compare

-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-#CPPFLAGS += $(CSTANDARD)

-

-

-#---------------- Assembler Options ----------------

-#  -Wa,...:   tell GCC to pass this to the assembler.

-#  -adhlns:   create listing

-#  -gstabs:   have the assembler create line number information; note that

-#             for use in COFF files, additional information about filenames

-#             and function names needs to be present in the assembler source

-#             files -- see avr-libc docs [FIXME: not yet described there]

-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex

-#       dump that will be displayed for a given single line of source input.

-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

-

-

-#---------------- Library Options ----------------

-# Minimalistic printf version

-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min

-

-# Floating point printf version (requires MATH_LIB = -lm below)

-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt

-

-# If this is left blank, then it will use the Standard printf version.

-PRINTF_LIB =

-#PRINTF_LIB = $(PRINTF_LIB_MIN)

-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)

-

-

-# Minimalistic scanf version

-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min

-

-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)

-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt

-

-# If this is left blank, then it will use the Standard scanf version.

-SCANF_LIB =

-#SCANF_LIB = $(SCANF_LIB_MIN)

-#SCANF_LIB = $(SCANF_LIB_FLOAT)

-

-

-MATH_LIB = -lm

-

-

-# List any extra directories to look for libraries here.

-#     Each directory must be seperated by a space.

-#     Use forward slashes for directory separators.

-#     For a directory that has spaces, enclose it in quotes.

-EXTRALIBDIRS =

-

-

-

-#---------------- External Memory Options ----------------

-

-# 64 KB of external RAM, starting after internal RAM (ATmega128!),

-# used for variables (.data/.bss) and heap (malloc()).

-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff

-

-# 64 KB of external RAM, starting after internal RAM (ATmega128!),

-# only used for heap (malloc()).

-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff

-

-EXTMEMOPTS =

-

-

-

-#---------------- Linker Options ----------------

-#  -Wl,...:     tell GCC to pass this to linker.

-#    -Map:      create map file

-#    --cref:    add cross reference to  map file

-LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref

-LDFLAGS += -Wl,--relax

-LDFLAGS += -Wl,--gc-sections

-LDFLAGS += $(EXTMEMOPTS)

-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))

-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)

-#LDFLAGS += -T linker_script.x

-

-

-

-#---------------- Programming Options (avrdude) ----------------

-

-# Programming hardware

-# Type: avrdude -c ?

-# to get a full listing.

-#

-AVRDUDE_PROGRAMMER = jtagmkII

-

-# com1 = serial port. Use lpt1 to connect to parallel port.

-AVRDUDE_PORT = usb

-

-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex

-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep

-

-

-# Uncomment the following if you want avrdude's erase cycle counter.

-# Note that this counter needs to be initialized first using -Yn,

-# see avrdude manual.

-#AVRDUDE_ERASE_COUNTER = -y

-

-# Uncomment the following if you do /not/ wish a verification to be

-# performed after programming the device.

-#AVRDUDE_NO_VERIFY = -V

-

-# Increase verbosity level.  Please use this when submitting bug

-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>

-# to submit bug reports.

-#AVRDUDE_VERBOSE = -v -v

-

-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)

-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)

-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)

-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)

-

-

-

-#---------------- Debugging Options ----------------

-

-# For simulavr only - target MCU frequency.

-DEBUG_MFREQ = $(F_CPU)

-

-# Set the DEBUG_UI to either gdb or insight.

-# DEBUG_UI = gdb

-DEBUG_UI = insight

-

-# Set the debugging back-end to either avarice, simulavr.

-DEBUG_BACKEND = avarice

-#DEBUG_BACKEND = simulavr

-

-# GDB Init Filename.

-GDBINIT_FILE = __avr_gdbinit

-

-# When using avarice settings for the JTAG

-JTAG_DEV = /dev/com1

-

-# Debugging port used to communicate between GDB / avarice / simulavr.

-DEBUG_PORT = 4242

-

-# Debugging host used to communicate between GDB / avarice / simulavr, normally

-#     just set to localhost unless doing some sort of crazy debugging when

-#     avarice is running on a different computer.

-DEBUG_HOST = localhost

-

-

-

-#============================================================================

-

-

-# Define programs and commands.

-SHELL = sh

-CC = avr-gcc

-OBJCOPY = avr-objcopy

-OBJDUMP = avr-objdump

-SIZE = avr-size

-AR = avr-ar rcs

-NM = avr-nm

-AVRDUDE = avrdude

-REMOVE = rm -f

-REMOVEDIR = rm -rf

-COPY = cp

-WINSHELL = cmd

-

-

-# Define Messages

-# English

-MSG_ERRORS_NONE = Errors: none

-MSG_BEGIN = -------- begin --------

-MSG_END = --------  end  --------

-MSG_SIZE_BEFORE = Size before:

-MSG_SIZE_AFTER = Size after:

-MSG_COFF = Converting to AVR COFF:

-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:

-MSG_FLASH = Creating load file for Flash:

-MSG_EEPROM = Creating load file for EEPROM:

-MSG_EXTENDED_LISTING = Creating Extended Listing:

-MSG_SYMBOL_TABLE = Creating Symbol Table:

-MSG_LINKING = Linking:

-MSG_COMPILING = Compiling C:

-MSG_COMPILING_CPP = Compiling C++:

-MSG_ASSEMBLING = Assembling:

-MSG_CLEANING = Cleaning project:

-MSG_CREATING_LIBRARY = Creating library:

-

-

-

-

-# Define all object files.

-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

-

-# Define all listing files.

-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

-

-

-# Compiler flags to generate dependency files.

-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d

-

-

-# Combine all necessary flags and optional flags.

-# Add target processor to flags.

-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)

-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)

-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)

-

-

-

-

-

-# Default target.

-all: begin gccversion sizebefore build sizeafter end

-

-# Change the build target to build a HEX file or a library.

-build: elf hex eep lss sym

-#build: lib

-

-

-elf: $(TARGET).elf

-hex: $(TARGET).hex

-eep: $(TARGET).eep

-lss: $(TARGET).lss

-sym: $(TARGET).sym

-LIBNAME=lib$(TARGET).a

-lib: $(LIBNAME)

-

-

-

-# Eye candy.

-# AVR Studio 3.x does not check make's exit code but relies on

-# the following magic strings to be generated by the compile job.

-begin:

-	@echo

-	@echo $(MSG_BEGIN)

-

-end:

-	@echo $(MSG_END)

-	@echo

-

-

-# Display size of file.

-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex

-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf

-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )

-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )

-

-

-sizebefore:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-sizeafter:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-

-

-# Display compiler version information.

-gccversion :

-	@$(CC) --version

-

-

-# Program the device.

-program: $(TARGET).hex $(TARGET).eep

-	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)

-

-flip: $(TARGET).hex

-	batchisp -hardware usb -device $(MCU) -operation erase f

-	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-

-dfu: $(TARGET).hex

-	dfu-programmer $(MCU) erase

-	dfu-programmer $(MCU) flash $(TARGET).hex

-	dfu-programmer $(MCU) reset

-

-flip-ee: $(TARGET).hex $(TARGET).eep

-	$(COPY) $(TARGET).eep $(TARGET)eep.hex

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-	$(REMOVE) $(TARGET)eep.hex

-

-dfu-ee: $(TARGET).hex $(TARGET).eep

-	dfu-programmer $(MCU) eeprom-flash $(TARGET).eep

-	dfu-programmer $(MCU) reset

-

-

-# Generate avr-gdb config/init file which does the following:

-#     define the reset signal, load the target file, connect to target, and set

-#     a breakpoint at main().

-gdb-config:

-	@$(REMOVE) $(GDBINIT_FILE)

-	@echo define reset >> $(GDBINIT_FILE)

-	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)

-	@echo end >> $(GDBINIT_FILE)

-	@echo file $(TARGET).elf >> $(GDBINIT_FILE)

-	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)

-ifeq ($(DEBUG_BACKEND),simulavr)

-	@echo load  >> $(GDBINIT_FILE)

-endif

-	@echo break main >> $(GDBINIT_FILE)

-

-debug: gdb-config $(TARGET).elf

-ifeq ($(DEBUG_BACKEND), avarice)

-	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.

-	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \

-	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)

-	@$(WINSHELL) /c pause

-

-else

-	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \

-	$(DEBUG_MFREQ) --port $(DEBUG_PORT)

-endif

-	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)

-

-

-

-

-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.

-COFFCONVERT = $(OBJCOPY) --debugging

-COFFCONVERT += --change-section-address .data-0x800000

-COFFCONVERT += --change-section-address .bss-0x800000

-COFFCONVERT += --change-section-address .noinit-0x800000

-COFFCONVERT += --change-section-address .eeprom-0x810000

-

-

-

-coff: $(TARGET).elf

-	@echo

-	@echo $(MSG_COFF) $(TARGET).cof

-	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof

-

-

-extcoff: $(TARGET).elf

-	@echo

-	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof

-	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof

-

-

-

-# Create final output files (.hex, .eep) from ELF output file.

-%.hex: %.elf

-	@echo

-	@echo $(MSG_FLASH) $@

-	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@

-

-%.eep: %.elf

-	@echo

-	@echo $(MSG_EEPROM) $@

-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \

-	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0

-

-# Create extended listing file from ELF output file.

-%.lss: %.elf

-	@echo

-	@echo $(MSG_EXTENDED_LISTING) $@

-	$(OBJDUMP) -h -S -z $< > $@

-

-# Create a symbol table from ELF output file.

-%.sym: %.elf

-	@echo

-	@echo $(MSG_SYMBOL_TABLE) $@

-	$(NM) -n $< > $@

-

-

-

-# Create library from object files.

-.SECONDARY : $(TARGET).a

-.PRECIOUS : $(OBJ)

-%.a: $(OBJ)

-	@echo

-	@echo $(MSG_CREATING_LIBRARY) $@

-	$(AR) $@ $(OBJ)

-

-

-# Link: create ELF output file from object files.

-.SECONDARY : $(TARGET).elf

-.PRECIOUS : $(OBJ)

-%.elf: $(OBJ)

-	@echo

-	@echo $(MSG_LINKING) $@

-	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)

-

-

-# Compile: create object files from C source files.

-$(OBJDIR)/%.o : %.c

-	@echo

-	@echo $(MSG_COMPILING) $<

-	$(CC) -c $(ALL_CFLAGS) $< -o $@

-

-

-# Compile: create object files from C++ source files.

-$(OBJDIR)/%.o : %.cpp

-	@echo

-	@echo $(MSG_COMPILING_CPP) $<

-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@

-

-

-# Compile: create assembler files from C source files.

-%.s : %.c

-	$(CC) -S $(ALL_CFLAGS) $< -o $@

-

-

-# Compile: create assembler files from C++ source files.

-%.s : %.cpp

-	$(CC) -S $(ALL_CPPFLAGS) $< -o $@

-

-

-# Assemble: create object files from assembler source files.

-$(OBJDIR)/%.o : %.S

-	@echo

-	@echo $(MSG_ASSEMBLING) $<

-	$(CC) -c $(ALL_ASFLAGS) $< -o $@

-

-

-# Create preprocessed source for use in sending a bug report.

-%.i : %.c

-	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@

-

-

-# Target: clean project.

-clean: begin clean_list end

-

-clean_list :

-	@echo

-	@echo $(MSG_CLEANING)

-	$(REMOVE) $(TARGET).hex

-	$(REMOVE) $(TARGET).eep

-	$(REMOVE) $(TARGET).cof

-	$(REMOVE) $(TARGET).elf

-	$(REMOVE) $(TARGET).map

-	$(REMOVE) $(TARGET).sym

-	$(REMOVE) $(TARGET).lss

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

-	$(REMOVE) $(SRC:.c=.s)

-	$(REMOVE) $(SRC:.c=.d)

-	$(REMOVE) $(SRC:.c=.i)

-	$(REMOVEDIR) .dep

-

-doxygen:

-	@echo Generating Project Documentation...

-	@doxygen Doxygen.conf

-	@echo Documentation Generation Complete.

-

-clean_doxygen:

-	rm -rf Documentation

-

-# Create object files directory

-$(shell mkdir $(OBJDIR) 2>/dev/null)

-

-

-# Include the dependency files.

--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)

-

-

-# Listing of phony targets.

-.PHONY : all begin finish end sizebefore sizeafter gccversion \

-build elf hex eep lss sym coff extcoff doxygen clean          \

-clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \

-debug gdb-config

-

+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+#  >> Modified for use with the LUFA project. <<
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+# Dean Camera
+# Opendous Inc.
+# Denver Gingerich
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+#                Please customize the avrdude settings below first!
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make doxygen = Generate DoxyGen documentation for the project (must have
+#                DoxyGen installed)
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+
+# MCU name
+MCU = at90usb1287
+
+
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
+# "Board" inside the application directory.
+BOARD = USBKEY
+
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 8000000
+
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+
+# Target file name (without extension).
+TARGET = AudioOutputHost
+
+
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+OBJDIR = .
+
+
+# Path to the LUFA library
+LUFA_PATH = ../../../..
+
+
+# LUFA library compile-time options and predefined tokens
+LUFA_OPTS  = -D USB_HOST_ONLY
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+
+LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL
+LUFA_OPTS += -D USE_TEST_TONE
+
+
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(TARGET).c                                                 \
+	  ConfigDescriptor.c                                          \
+	  $(LUFA_SRC_USB)                                             \
+	  $(LUFA_SRC_SERIAL)
+
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+
+# List Assembler source files here.
+#     Make them always end in a capital .S.  Files ending in a lowercase .s
+#     will not be considered source files but generated files (assembler
+#     output from the compiler), and will be deleted upon "make clean"!
+#     Even though the DOS/Win* filesystem matches both .s and .S the same,
+#     it will preserve the spelling of the filenames, and gcc itself does
+#     care about how the name is spelled on its command-line.
+ASRC =
+
+
+# Optimization level, can be [0, 1, 2, 3, s].
+#     0 = turn off optimization. s = optimize for size.
+#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = s
+
+
+# Debugging format.
+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+#     AVR Studio 4.10 requires dwarf-2.
+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+
+# List any extra directories to look for include files here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = $(LUFA_PATH)/
+
+
+# Compiler flag to set the C Standard level.
+#     c89   = "ANSI" C
+#     gnu89 = c89 plus GCC extensions
+#     c99   = ISO C99 standard (not yet fully implemented)
+#     gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=c99
+
+
+# Place -D or -U options here for C sources
+CDEFS  = -DF_CPU=$(F_CPU)UL
+CDEFS += -DF_USB=$(F_USB)UL
+CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
+CDEFS += $(LUFA_OPTS)
+
+
+# Place -D or -U options here for ASM sources
+ADEFS  = -DF_CPU=$(F_CPU)
+ADEFS += -DF_USB=$(F_USB)UL
+ADEFS += -DBOARD=BOARD_$(BOARD)
+ADEFS += $(LUFA_OPTS)
+
+# Place -D or -U options here for C++ sources
+CPPDEFS  = -DF_CPU=$(F_CPU)UL
+CPPDEFS += -DF_USB=$(F_USB)UL
+CPPDEFS += -DBOARD=BOARD_$(BOARD)
+CPPDEFS += $(LUFA_OPTS)
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+
+
+#---------------- Compiler Options C ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
+CFLAGS += -fno-inline-small-functions
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+CFLAGS += -fno-strict-aliasing
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+
+
+#---------------- Compiler Options C++ ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CPPFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+
+
+#---------------- Assembler Options ----------------
+#  -Wa,...:   tell GCC to pass this to the assembler.
+#  -adhlns:   create listing
+#  -gstabs:   have the assembler create line number information; note that
+#             for use in COFF files, additional information about filenames
+#             and function names needs to be present in the assembler source
+#             files -- see avr-libc docs [FIXME: not yet described there]
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
+#       dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB =
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB =
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+
+MATH_LIB = -lm
+
+
+# List any extra directories to look for libraries here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
+#---------------- Linker Options ----------------
+#  -Wl,...:     tell GCC to pass this to linker.
+#    -Map:      create map file
+#    --cref:    add cross reference to  map file
+LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = jtagmkII
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = usb
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+#     just set to localhost unless doing some sort of crazy debugging when
+#     avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = --------  end  --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+
+
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+
+
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex eep lss sym
+#build: lib
+
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@echo
+	@echo $(MSG_BEGIN)
+
+end:
+	@echo $(MSG_END)
+	@echo
+
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
+MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
+FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
+
+
+sizebefore:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+sizeafter:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+
+
+# Display compiler version information.
+gccversion :
+	@$(CC) --version
+
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+flip: $(TARGET).hex
+	batchisp -hardware usb -device $(MCU) -operation erase f
+	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(TARGET).hex
+	dfu-programmer $(MCU) erase
+	dfu-programmer $(MCU) flash $(TARGET).hex
+	dfu-programmer $(MCU) reset
+
+flip-ee: $(TARGET).hex $(TARGET).eep
+	$(COPY) $(TARGET).eep $(TARGET)eep.hex
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+	$(REMOVE) $(TARGET)eep.hex
+
+dfu-ee: $(TARGET).hex $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
+	dfu-programmer $(MCU) reset
+
+
+# Generate avr-gdb config/init file which does the following:
+#     define the reset signal, load the target file, connect to target, and set
+#     a breakpoint at main().
+gdb-config:
+	@$(REMOVE) $(GDBINIT_FILE)
+	@echo define reset >> $(GDBINIT_FILE)
+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+	@echo end >> $(GDBINIT_FILE)
+	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+	@echo load  >> $(GDBINIT_FILE)
+endif
+	@echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+	@$(WINSHELL) /c pause
+
+else
+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+
+
+coff: $(TARGET).elf
+	@echo
+	@echo $(MSG_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+	@echo
+	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
+
+%.eep: %.elf
+	@echo
+	@echo $(MSG_EEPROM) $@
+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+	@echo
+	@echo $(MSG_EXTENDED_LISTING) $@
+	$(OBJDUMP) -h -S -z $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+	@echo
+	@echo $(MSG_SYMBOL_TABLE) $@
+	$(NM) -n $< > $@
+
+
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+	@echo
+	@echo $(MSG_CREATING_LIBRARY) $@
+	$(AR) $@ $(OBJ)
+
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+	@echo
+	@echo $(MSG_LINKING) $@
+	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+	@echo
+	@echo $(MSG_COMPILING) $<
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+	@echo
+	@echo $(MSG_COMPILING_CPP) $<
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+	$(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+	@echo
+	@echo $(MSG_ASSEMBLING) $<
+	$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+	@echo
+	@echo $(MSG_CLEANING)
+	$(REMOVE) $(TARGET).hex
+	$(REMOVE) $(TARGET).eep
+	$(REMOVE) $(TARGET).cof
+	$(REMOVE) $(TARGET).elf
+	$(REMOVE) $(TARGET).map
+	$(REMOVE) $(TARGET).sym
+	$(REMOVE) $(TARGET).lss
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+	$(REMOVE) $(SRC:.c=.s)
+	$(REMOVE) $(SRC:.c=.d)
+	$(REMOVE) $(SRC:.c=.i)
+	$(REMOVEDIR) .dep
+
+doxygen:
+	@echo Generating Project Documentation...
+	@doxygen Doxygen.conf
+	@echo Documentation Generation Complete.
+
+clean_doxygen:
+	rm -rf Documentation
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff doxygen clean          \
+clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
+debug gdb-config
+