Add branch for the conversion of demos to use standard C header files for configuration, rather than makefile defined macros.

36 files changed, 87 insertions, 111 deletions

diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c b/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c
index 1b8613b69..6db853267 100644
--- a/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c
@@ -95,12 +95,10 @@ uint8_t ProcessConfigurationDescriptor(void)
 	}
 
 	/* Configure the Android Accessory data IN pipe */
-	Pipe_ConfigurePipe(ANDROID_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(ANDROID_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
 
 	/* Configure the Android Accessory data OUT pipe */
-	Pipe_ConfigurePipe(ANDROID_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,
-					   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(ANDROID_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
 
 	/* Valid data found, return success */
 	return SuccessfulConfigRead;
diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h b/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h
index 05e1b91e1..53b7280b4 100644
--- a/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h
@@ -40,8 +40,11 @@
 		#include <LUFA/Drivers/USB/USB.h>
 
 	/* Macros: */
-		#define ANDROID_DATA_IN_PIPE         1
-		#define ANDROID_DATA_OUT_PIPE        2
+		/** Pipe address of the Android Accessory data IN pipe. */
+		#define ANDROID_DATA_IN_PIPE         (PIPE_DIR_IN  | 1)
+
+		/** Pipe address of the Android Accessory data OUT pipe. */
+		#define ANDROID_DATA_OUT_PIPE        (PIPE_DIR_OUT | 2)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c
index b26dbb80e..9274e633d 100644
--- a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c
@@ -130,8 +130,7 @@ uint8_t ProcessConfigurationDescriptor(void)
 	StreamingEndpointAddress     = DataINEndpoint->EndpointAddress;
 
 	/* Configure the Audio data IN pipe */
-	Pipe_ConfigurePipe(AUDIO_DATA_IN_PIPE, EP_TYPE_ISOCHRONOUS, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_DOUBLE);
+	Pipe_ConfigurePipe(AUDIO_DATA_IN_PIPE, EP_TYPE_ISOCHRONOUS, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 2);
 
 	/* Valid data found, return success */
 	return SuccessfulConfigRead;
diff --git a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h
index a5f425900..84d27c7e6 100644
--- a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h
@@ -42,8 +42,8 @@
 		#include "AudioInputHost.h"
 
 	/* Macros: */
-		/** Pipe number for the Audio data IN pipe. */
-		#define AUDIO_DATA_IN_PIPE          1
+		/** Pipe address for the Audio data IN pipe. */
+		#define AUDIO_DATA_IN_PIPE          (PIPE_DIR_IN | 1)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf
index b98cf1f14..44513ef35 100644
--- a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf
+++ b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf
@@ -26,7 +26,7 @@ DOXYFILE_ENCODING      = UTF-8
 # identify the project. Note that if you do not use Doxywizard you need
 # to put quotes around the project name if it contains spaces.
 
-PROJECT_NAME           = "LUFA Library - Audio Input Host"
+PROJECT_NAME           = "LUFA Library - Audio Input Host Demo"
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
 # This could be handy for archiving the generated documentation or
diff --git a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c
index 99980fd3d..cc2506274 100644
--- a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c
@@ -130,8 +130,7 @@ uint8_t ProcessConfigurationDescriptor(void)
 	StreamingEndpointAddress     = DataOUTEndpoint->EndpointAddress;
 
 	/* Configure the Audio data OUT pipe */
-	Pipe_ConfigurePipe(AUDIO_DATA_OUT_PIPE, EP_TYPE_ISOCHRONOUS, PIPE_TOKEN_OUT,
-	                   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_DOUBLE);
+	Pipe_ConfigurePipe(AUDIO_DATA_OUT_PIPE, EP_TYPE_ISOCHRONOUS, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 2);
 
 	/* Valid data found, return success */
 	return SuccessfulConfigRead;
diff --git a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h
index dcf367e15..0c4f06766 100644
--- a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h
@@ -42,8 +42,8 @@
 		#include "AudioOutputHost.h"
 
 	/* Macros: */
-		/** Pipe number for the Audio data OUT pipe. */
-		#define AUDIO_DATA_OUT_PIPE          1
+		/** Pipe address for the Audio data OUT pipe. */
+		#define AUDIO_DATA_OUT_PIPE          (PIPE_DIR_OUT | 1)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf
index 55c9bb563..9cb0e55a2 100644
--- a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf
+++ b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf
@@ -26,7 +26,7 @@ DOXYFILE_ENCODING      = UTF-8
 # identify the project. Note that if you do not use Doxywizard you need
 # to put quotes around the project name if it contains spaces.
 
-PROJECT_NAME           = "LUFA Library - Audio Output Host"
+PROJECT_NAME           = "LUFA Library - Audio Output Host Demo"
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
 # This could be handy for archiving the generated documentation or
diff --git a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c
index 6df253cb5..9067450e2 100644
--- a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c
@@ -109,16 +109,14 @@ uint8_t ProcessConfigurationDescriptor(void)
 	}
 
 	/* Configure the HID data IN pipe */
-	Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
 	Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
 
 	/* Check if the HID interface contained an optional OUT data endpoint */
 	if (DataOUTEndpoint)
 	{
 		/* Configure the HID data OUT pipe */
-		Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_OUT,
-						   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+		Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
 	}
 
 	/* Valid data found, return success */
diff --git a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h
index 4614893d5..547f1545b 100644
--- a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h
@@ -42,11 +42,11 @@
 		#include "GenericHIDHost.h"
 
 	/* Macros: */
-		/** Pipe number for the HID data IN pipe. */
-		#define HID_DATA_IN_PIPE          1
+		/** Pipe address for the HID data IN pipe. */
+		#define HID_DATA_IN_PIPE          (PIPE_DIR_IN  | 1)
 
-		/** Pipe number for the HID data OUT pipe. */
-		#define HID_DATA_OUT_PIPE         2
+		/** Pipe address for the HID data OUT pipe. */
+		#define HID_DATA_OUT_PIPE         (PIPE_DIR_OUT | 2)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c
index 4f7a0d61b..be6eb09cd 100644
--- a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c
@@ -110,8 +110,7 @@ uint8_t ProcessConfigurationDescriptor(void)
 	}
 
 	/* Configure the HID data IN pipe */
-	Pipe_ConfigurePipe(JOYSTICK_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(JOYSTICK_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
 	Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
 
 	/* Get the HID report size from the HID report descriptor */
diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h
index 69fdfedf2..fba5713b2 100644
--- a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h
@@ -42,8 +42,8 @@
 		#include "HIDReport.h"
 
 	/* Macros: */
-		/** Pipe number for the joystick report data pipe. */
-		#define JOYSTICK_DATA_IN_PIPE       1
+		/** Pipe address for the joystick report data pipe. */
+		#define JOYSTICK_DATA_IN_PIPE       (PIPE_DIR_IN | 1)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf
index 4366e6edd..65c60866b 100644
--- a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf
+++ b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf
@@ -26,7 +26,7 @@ DOXYFILE_ENCODING      = UTF-8
 # identify the project. Note that if you do not use Doxywizard you need
 # to put quotes around the project name if it contains spaces.
 
-PROJECT_NAME           = "LUFA Library - Joystick Host (Using HID Descriptor Parser)"
+PROJECT_NAME           = "LUFA Library - Joystick Host Demo (Using HID Descriptor Parser)"
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
 # This could be handy for archiving the generated documentation or
diff --git a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c
index cfcee7b8b..73dc5dfe5 100644
--- a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c
@@ -98,8 +98,7 @@ uint8_t ProcessConfigurationDescriptor(void)
 	}
 
 	/* Configure the HID data IN pipe */
-	Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
 	Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
 
 	/* Valid data found, return success */
diff --git a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h
index 5b44d3fd5..eb09f695f 100644
--- a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h
@@ -42,8 +42,8 @@
 		#include "KeyboardHost.h"
 
 	/* Macros: */
-		/** Pipe number for the keyboard data IN pipe. */
-		#define KEYBOARD_DATA_IN_PIPE          1
+		/** Pipe address for the keyboard data IN pipe. */
+		#define KEYBOARD_DATA_IN_PIPE          (PIPE_DIR_IN | 1)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c
index 765b325f0..ddd43590b 100644
--- a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c
@@ -110,8 +110,7 @@ uint8_t ProcessConfigurationDescriptor(void)
 	}
 
 	/* Configure the HID data IN pipe */
-	Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
 	Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
 
 	/* Get the HID report size from the HID report descriptor */
diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h
index ffa2afd8e..c40211cb0 100644
--- a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h
@@ -42,8 +42,8 @@
 		#include "HIDReport.h"
 
 	/* Macros: */
-		/** Pipe number for the keyboard report data pipe. */
-		#define KEYBOARD_DATA_IN_PIPE          1
+		/** Pipe address for the keyboard report data IN pipe. */
+		#define KEYBOARD_DATA_IN_PIPE          (PIPE_DIR_IN | 1)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf
index 9f76d7efd..3e481571d 100644
--- a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf
+++ b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf
@@ -26,7 +26,7 @@ DOXYFILE_ENCODING      = UTF-8
 # identify the project. Note that if you do not use Doxywizard you need
 # to put quotes around the project name if it contains spaces.
 
-PROJECT_NAME           = "LUFA Library - Keyboard Host (Using HID Descriptor Parser)"
+PROJECT_NAME           = "LUFA Library - Keyboard Host Demo (Using HID Descriptor Parser)"
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
 # This could be handy for archiving the generated documentation or
diff --git a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c
index 39e513cf6..70381ea56 100644
--- a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c
@@ -105,12 +105,10 @@ uint8_t ProcessConfigurationDescriptor(void)
 	}
 
 	/* Configure the MIDI data IN pipe */
-	Pipe_ConfigurePipe(MIDI_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(MIDI_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
 
 	/* Configure the MIDI data OUT pipe */
-	Pipe_ConfigurePipe(MIDI_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,
-					   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(MIDI_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
 
 	/* Valid data found, return success */
 	return SuccessfulConfigRead;
diff --git a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h
index d41513e4e..40d4dc9cc 100644
--- a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h
@@ -42,11 +42,11 @@
 		#include "MIDIHost.h"
 
 	/* Macros: */
-		/** Pipe number for the MIDI data IN pipe. */
-		#define MIDI_DATA_IN_PIPE              1
+		/** Pipe address for the MIDI data IN pipe. */
+		#define MIDI_DATA_IN_PIPE              (PIPE_DIR_IN  | 1)
 
-		/** Pipe number for the MIDI data OUT pipe. */
-		#define MIDI_DATA_OUT_PIPE             2
+		/** Pipe address for the MIDI data OUT pipe. */
+		#define MIDI_DATA_OUT_PIPE             (PIPE_DIR_OUT | 2)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/MIDIHost/MIDIHost.c b/Demos/Host/LowLevel/MIDIHost/MIDIHost.c
index 060761f58..f4a52accd 100644
--- a/Demos/Host/LowLevel/MIDIHost/MIDIHost.c
+++ b/Demos/Host/LowLevel/MIDIHost/MIDIHost.c
@@ -177,8 +177,8 @@ void MIDIHost_Task(void)
 		if (!(Pipe_BytesInPipe()))
 		  Pipe_ClearIN();
 
-		bool NoteOnEvent  = ((MIDIEvent.Command & 0x0F) == (MIDI_COMMAND_NOTE_ON  >> 4));
-		bool NoteOffEvent = ((MIDIEvent.Command & 0x0F) == (MIDI_COMMAND_NOTE_OFF >> 4));
+		bool NoteOnEvent  = (MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON));
+		bool NoteOffEvent = (MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_OFF));
 
 		if (NoteOnEvent || NoteOffEvent)
 		{
@@ -237,8 +237,7 @@ void MIDIHost_Task(void)
 		{
 			MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
 				{
-					.CableNumber = 0,
-					.Command     = (MIDICommand >> 4),
+					.Event       = MIDI_EVENT(0, MIDICommand),
 
 					.Data1       = MIDICommand | Channel,
 					.Data2       = MIDIPitch,
diff --git a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c
index 566cdb10c..0e967f972 100644
--- a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c
@@ -105,12 +105,10 @@ uint8_t ProcessConfigurationDescriptor(void)
 	}
 
 	/* Configure the Mass Storage data IN pipe */
-	Pipe_ConfigurePipe(MASS_STORE_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(MASS_STORE_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
 
 	/* Configure the Mass Storage data OUT pipe */
-	Pipe_ConfigurePipe(MASS_STORE_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,
-					   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(MASS_STORE_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
 
 	/* Valid data found, return success */
 	return SuccessfulConfigRead;
diff --git a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h
index a40debd98..eb0746b04 100644
--- a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h
@@ -51,11 +51,11 @@
 		/** Interface Protocol value for the Bulk Only transport protocol. */
 		#define MASS_STORE_PROTOCOL            0x50
 
-		/** Pipe number of the Mass Storage data IN pipe. */
-		#define MASS_STORE_DATA_IN_PIPE        1
+		/** Pipe address of the Mass Storage data IN pipe. */
+		#define MASS_STORE_DATA_IN_PIPE        (PIPE_DIR_IN  | 1)
 
-		/** Pipe number of the Mass Storage data OUT pipe. */
-		#define MASS_STORE_DATA_OUT_PIPE       2
+		/** Pipe address of the Mass Storage data OUT pipe. */
+		#define MASS_STORE_DATA_OUT_PIPE       (PIPE_DIR_OUT | 2)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c
index c33e08769..4992e3a67 100644
--- a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c
@@ -98,8 +98,7 @@ uint8_t ProcessConfigurationDescriptor(void)
 	}
 
 	/* Configure the HID data IN pipe */
-	Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
 	Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
 
 	/* Valid data found, return success */
diff --git a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h
index 9619c44ac..14051a6a9 100644
--- a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h
@@ -42,8 +42,8 @@
 		#include "MouseHost.h"
 
 	/* Macros: */
-		/** Pipe number for the mouse data IN pipe. */
-		#define MOUSE_DATA_IN_PIPE          1
+		/** Pipe address for the mouse data IN pipe. */
+		#define MOUSE_DATA_IN_PIPE          (PIPE_DIR_IN | 1)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c
index c6647007c..7d63d2bdb 100644
--- a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c
@@ -110,8 +110,7 @@ uint8_t ProcessConfigurationDescriptor(void)
 	}
 
 	/* Configure the HID data IN pipe */
-	Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
 	Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
 
 	/* Get the HID report size from the HID report descriptor */
diff --git a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h
index 799761bba..0a2582bfe 100644
--- a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h
@@ -42,8 +42,8 @@
 		#include "HIDReport.h"
 
 	/* Macros: */
-		/** Pipe number for the mouse report data pipe. */
-		#define MOUSE_DATA_IN_PIPE          1
+		/** Pipe address for the mouse report data IN pipe. */
+		#define MOUSE_DATA_IN_PIPE          (ENDPOINT_DIR_IN | 1)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf
index fcf83567f..b41e8d85a 100644
--- a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf
+++ b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf
@@ -26,7 +26,7 @@ DOXYFILE_ENCODING      = UTF-8
 # identify the project. Note that if you do not use Doxywizard you need
 # to put quotes around the project name if it contains spaces.
 
-PROJECT_NAME           = "LUFA Library - Mouse Host (Using HID Descriptor Parser)"
+PROJECT_NAME           = "LUFA Library - Mouse Host Demo (Using HID Descriptor Parser)"
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
 # This could be handy for archiving the generated documentation or
diff --git a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c
index f259c1fd8..922734f33 100644
--- a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c
@@ -108,12 +108,10 @@ uint8_t ProcessConfigurationDescriptor(void)
 	PrinterAltSetting      = PrinterInterface->AlternateSetting;
 
 	/* Configure the Printer data IN pipe */
-	Pipe_ConfigurePipe(PRINTER_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(PRINTER_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
 
 	/* Configure the Printer data OUT pipe */
-	Pipe_ConfigurePipe(PRINTER_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,
-					   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(PRINTER_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
 
 	/* Valid data found, return success */
 	return SuccessfulConfigRead;
diff --git a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h
index cc9e2cb44..d5a32cddf 100644
--- a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h
@@ -38,11 +38,11 @@
 		#include "Lib/PrinterCommands.h"
 
 	/* Macros: */
-		/** Pipe number of the Printer data IN pipe. */
-		#define PRINTER_DATA_IN_PIPE             1
+		/** Pipe address of the Printer data IN pipe. */
+		#define PRINTER_DATA_IN_PIPE             (PIPE_DIR_IN  | 1)
 
-		/** Pipe number of the Printer data OUT pipe. */
-		#define PRINTER_DATA_OUT_PIPE            2
+		/** Pipe address of the Printer data OUT pipe. */
+		#define PRINTER_DATA_OUT_PIPE            (PIPE_DIR_OUT | 2)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c
index 04930009e..df317ef62 100644
--- a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c
@@ -131,16 +131,13 @@ uint8_t ProcessConfigurationDescriptor(void)
 	}
 
 	/* Configure the RNDIS data IN pipe */
-	Pipe_ConfigurePipe(RNDIS_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(RNDIS_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
 
 	/* Configure the RNDIS data OUT pipe */
-	Pipe_ConfigurePipe(RNDIS_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,
-					   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(RNDIS_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
 
 	/* Configure the RNDIS notification pipe */
-	Pipe_ConfigurePipe(RNDIS_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
-					   NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(RNDIS_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, 1);
 	Pipe_SetInterruptPeriod(NotificationEndpoint->PollingIntervalMS);
 
 	/* Valid data found, return success */
diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h
index e9cf19f4c..19f26b408 100644
--- a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h
@@ -42,14 +42,14 @@
 		#include "RNDISEthernetHost.h"
 
 	/* Macros: */
-		/** Pipe number for the RNDIS data IN pipe. */
-		#define RNDIS_DATA_IN_PIPE             1
+		/** Pipe address for the RNDIS data IN pipe. */
+		#define RNDIS_DATA_IN_PIPE             (PIPE_DIR_IN  | 1)
 
-		/** Pipe number for the RNDIS data OUT pipe. */
-		#define RNDIS_DATA_OUT_PIPE            2
+		/** Pipe address for the RNDIS data OUT pipe. */
+		#define RNDIS_DATA_OUT_PIPE            (PIPE_DIR_OUT | 2)
 
-		/** Pipe number for the RNDIS notification pipe. */
-		#define RNDIS_NOTIFICATION_PIPE        3
+		/** Pipe address for the RNDIS notification IN pipe. */
+		#define RNDIS_NOTIFICATION_PIPE        (PIPE_DIR_IN  | 3)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c
index 269dc3ba4..c5c78ce60 100644
--- a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c
@@ -115,16 +115,13 @@ uint8_t ProcessConfigurationDescriptor(void)
 	}
 
 	/* Configure the Still Image data IN pipe */
-	Pipe_ConfigurePipe(SIMAGE_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(SIMAGE_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
 
 	/* Configure the Still Image data OUT pipe */
-	Pipe_ConfigurePipe(SIMAGE_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,
-					   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(SIMAGE_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
 
 	/* Configure the Still Image events pipe */
-	Pipe_ConfigurePipe(SIMAGE_EVENTS_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
-					   EventsEndpoint->EndpointAddress, EventsEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(SIMAGE_EVENTS_PIPE, EP_TYPE_INTERRUPT, EventsEndpoint->EndpointAddress, EventsEndpoint->EndpointSize, 1);
 	Pipe_SetInterruptPeriod(EventsEndpoint->PollingIntervalMS);
 
 	/* Valid data found, return success */
diff --git a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h
index 04b81a281..93dcfc644 100644
--- a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h
@@ -42,14 +42,14 @@
 		#include "StillImageHost.h"
 
 	/* Macros: */
-		/** Pipe number of the Still Image data IN pipe. */
-		#define SIMAGE_DATA_IN_PIPE            1
+		/** Pipe address of the Still Image data IN pipe. */
+		#define SIMAGE_DATA_IN_PIPE            (PIPE_DIR_IN  | 1)
 
-		/** Pipe number of the Still Image data OUT pipe. */
-		#define SIMAGE_DATA_OUT_PIPE           2
+		/** Pipe address of the Still Image data OUT pipe. */
+		#define SIMAGE_DATA_OUT_PIPE           (PIPE_DIR_OUT | 2)
 
-		/** Pipe number of the Still Image events pipe. */
-		#define SIMAGE_EVENTS_PIPE             3
+		/** Pipe address of the Still Image events IN pipe. */
+		#define SIMAGE_EVENTS_PIPE             (PIPE_DIR_IN  | 3)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
diff --git a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c
index 4126d761d..552b02aff 100644
--- a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c
+++ b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c
@@ -131,16 +131,13 @@ uint8_t ProcessConfigurationDescriptor(void)
 	}
 
 	/* Configure the CDC data IN pipe */
-	Pipe_ConfigurePipe(CDC_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,
-	                   DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(CDC_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
 
 	/* Configure the CDC data OUT pipe */
-	Pipe_ConfigurePipe(CDC_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,
-					   DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(CDC_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
 
 	/* Configure the CDC notification pipe */
-	Pipe_ConfigurePipe(CDC_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
-					   NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, PIPE_BANK_SINGLE);
+	Pipe_ConfigurePipe(CDC_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, 1);
 	Pipe_SetInterruptPeriod(NotificationEndpoint->PollingIntervalMS);
 
 	/* Valid data found, return success */
diff --git a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h
index c5a60b48a..e9f12dcc4 100644
--- a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h
+++ b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h
@@ -42,14 +42,14 @@
 		#include "VirtualSerialHost.h"
 
 	/* Macros: */
-		/** Pipe number for the CDC data IN pipe. */
-		#define CDC_DATA_IN_PIPE               1
+		/** Pipe address for the CDC data IN pipe. */
+		#define CDC_DATA_IN_PIPE               (PIPE_DIR_IN  | 1)
 
-		/** Pipe number for the CDC data OUT pipe. */
-		#define CDC_DATA_OUT_PIPE              2
+		/** Pipe address for the CDC data OUT pipe. */
+		#define CDC_DATA_OUT_PIPE              (PIPE_DIR_OUT | 2)
 
-		/** Pipe number for the CDC notification pipe. */
-		#define CDC_NOTIFICATION_PIPE          3
+		/** Pipe address for the CDC notification IN pipe. */
+		#define CDC_NOTIFICATION_PIPE          (PIPE_DIR_IN  | 3)
 
 	/* Enums: */
 		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */