Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.

38 files changed, 139 insertions, 122 deletions

diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.c b/Demos/Device/ClassDriver/AudioInput/AudioInput.c
index 31e8d96ad..f11122fd3 100644
--- a/Demos/Device/ClassDriver/AudioInput/AudioInput.c
+++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.c
@@ -106,11 +106,11 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
 		#if defined(USE_TEST_TONE)
 			static uint8_t SquareWaveSampleCount;
 			static int16_t CurrentWaveValue;
-			
+
 			/* In test tone mode, generate a square wave at 1/256 of the sample rate */
 			if (SquareWaveSampleCount++ == 0xFF)
 			  CurrentWaveValue ^= 0x8000;
-			
+
 			/* Only generate audio if the board button is being pressed */
 			AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;
 		#else
@@ -122,7 +122,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
 			AudioSample -= (SAMPLE_MAX_RANGE / 2);
 			#endif
 		#endif
-		
+
 		Audio_Device_WriteSample16(&Microphone_Audio_Interface, AudioSample);
 	}
 
@@ -211,10 +211,10 @@ bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t*
 						CurrentAudioSampleFrequency = (((uint32_t)Data[2] << 16) | ((uint32_t)Data[1] << 8) | (uint32_t)Data[0]);
 
 						/* Adjust sample reload timer to the new frequency */
-						OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);				
+						OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
 					}
-					
-					return true;				
+
+					return true;
 				case AUDIO_REQ_GetCurrent:
 					/* Check if we are just testing for a valid property, or actually reading it */
 					if (DataLength != NULL)
@@ -223,13 +223,14 @@ bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t*
 
 						Data[2] = (CurrentAudioSampleFrequency >> 16);
 						Data[1] = (CurrentAudioSampleFrequency >> 8);
-						Data[0] = (CurrentAudioSampleFrequency &  0xFF);					
+						Data[0] = (CurrentAudioSampleFrequency &  0xFF);
 					}
-					
+
 					return true;
 			}
 		}
 	}
-	
+
 	return false;
 }
+
diff --git a/Demos/Device/ClassDriver/AudioInput/Descriptors.c b/Demos/Device/ClassDriver/AudioInput/Descriptors.c
index 2a6a77734..48059affe 100644
--- a/Demos/Device/ClassDriver/AudioInput/Descriptors.c
+++ b/Demos/Device/ClassDriver/AudioInput/Descriptors.c
@@ -204,7 +204,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 
 			.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t))
 		},
-	
+
 	.Audio_AudioFormatSampleRates =
 		{
 			AUDIO_SAMPLE_FREQ(8000),
diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
index 8858999a2..88f82006e 100644
--- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
+++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
@@ -91,7 +91,7 @@ void SetupHardware(void)
 ISR(TIMER0_COMPA_vect, ISR_BLOCK)
 {
 	uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
-	
+
 	/* Check that the USB bus is ready for the next sample to read */
 	if (Audio_Device_IsSampleReceived(&Speaker_Audio_Interface))
 	{
@@ -128,8 +128,8 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
 
 		LEDs_SetAllLEDs(LEDMask);
 	}
-	
-	Endpoint_SelectEndpoint(PrevEndpoint);	
+
+	Endpoint_SelectEndpoint(PrevEndpoint);
 }
 
 /** Event handler for the library USB Connection event. */
@@ -248,10 +248,10 @@ bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t*
 						CurrentAudioSampleFrequency = (((uint32_t)Data[2] << 16) | ((uint32_t)Data[1] << 8) | (uint32_t)Data[0]);
 
 						/* Adjust sample reload timer to the new frequency */
-						OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);				
+						OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
 					}
-					
-					return true;				
+
+					return true;
 				case AUDIO_REQ_GetCurrent:
 					/* Check if we are just testing for a valid property, or actually reading it */
 					if (DataLength != NULL)
@@ -260,13 +260,14 @@ bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t*
 
 						Data[2] = (CurrentAudioSampleFrequency >> 16);
 						Data[1] = (CurrentAudioSampleFrequency >> 8);
-						Data[0] = (CurrentAudioSampleFrequency &  0xFF);					
+						Data[0] = (CurrentAudioSampleFrequency &  0xFF);
 					}
-					
+
 					return true;
 			}
 		}
 	}
-	
+
 	return false;
 }
+
diff --git a/Demos/Device/ClassDriver/AudioOutput/Descriptors.c b/Demos/Device/ClassDriver/AudioOutput/Descriptors.c
index 75a13bb7a..50d0bb6a0 100644
--- a/Demos/Device/ClassDriver/AudioOutput/Descriptors.c
+++ b/Demos/Device/ClassDriver/AudioOutput/Descriptors.c
@@ -204,7 +204,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 
 			.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t)),
 		},
-	
+
 	.Audio_AudioFormatSampleRates =
 		{
 			AUDIO_SAMPLE_FREQ(8000),
diff --git a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h
index da95077c4..aa551b00c 100644
--- a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h
+++ b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h
@@ -83,3 +83,4 @@
 		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
 
 #endif
+
diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h
index 4affeafe1..fc13b576c 100644
--- a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h
+++ b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h
@@ -109,3 +109,4 @@
 		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
 
 #endif
+
diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.c b/Demos/Device/ClassDriver/GenericHID/GenericHID.c
index 466efaf7f..be795409a 100644
--- a/Demos/Device/ClassDriver/GenericHID/GenericHID.c
+++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.c
@@ -145,7 +145,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn
 {
 	uint8_t* Data = (uint8_t*)ReportData;
 	uint8_t  CurrLEDMask = LEDs_GetLEDs();
-		
+
 	Data[0] = ((CurrLEDMask & LEDS_LED1) ? 1 : 0);
 	Data[1] = ((CurrLEDMask & LEDS_LED2) ? 1 : 0);
 	Data[2] = ((CurrLEDMask & LEDS_LED3) ? 1 : 0);
@@ -171,7 +171,7 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI
 {
 	uint8_t* Data = (uint8_t*)ReportData;
 	uint8_t  NewLEDMask = LEDS_NO_LEDS;
-	
+
 	if (Data[0])
 	  NewLEDMask |= LEDS_LED1;
 
@@ -183,7 +183,7 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI
 
 	if (Data[3])
 	  NewLEDMask |= LEDS_LED1;
-	  
+
 	LEDs_SetAllLEDs(NewLEDMask);
 }
 
diff --git a/Demos/Device/ClassDriver/Joystick/Descriptors.c b/Demos/Device/ClassDriver/Joystick/Descriptors.c
index cc7399288..bd1ba4c9d 100644
--- a/Demos/Device/ClassDriver/Joystick/Descriptors.c
+++ b/Demos/Device/ClassDriver/Joystick/Descriptors.c
@@ -42,7 +42,7 @@
  *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
  *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
  *  more details on HID report descriptors.
- */ 
+ */
 const USB_Descriptor_HIDReport_Datatype_t PROGMEM JoystickReport[] =
 {
 	/* Use the HID class driver's standard Joystick report.
diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.c b/Demos/Device/ClassDriver/Keyboard/Keyboard.c
index 2072e77fb..6109ede2b 100644
--- a/Demos/Device/ClassDriver/Keyboard/Keyboard.c
+++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.c
@@ -8,7 +8,7 @@
 
 /*
   Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  
+
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
   without fee, provided that the above copyright notice appear in
diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c
index 03caa0771..bc015ef22 100644
--- a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c
+++ b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c
@@ -279,7 +279,7 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
 				Address = &ConfigurationDescriptor.HID2_MouseHID;
 				Size    = sizeof(USB_HID_Descriptor_HID_t);
 			}
-			
+
 			break;
 		case HID_DTYPE_Report:
 			if (!(wIndex))
diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c
index b6a2bd7f5..2e7339b5f 100644
--- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c
+++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c
@@ -258,3 +258,4 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI
 		LEDs_SetAllLEDs(LEDMask);
 	}
 }
+
diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c
index de60d76d8..cac4853fc 100644
--- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c
+++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c
@@ -77,7 +77,7 @@ const USB_Descriptor_HIDReport_Datatype_t PROGMEM HIDReport[] =
 	        HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
 	    HID_RI_END_COLLECTION(0),
 	HID_RI_END_COLLECTION(0),
-	
+
 	/* Keyboard Report */
 	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
 	HID_RI_USAGE(8, 0x06), /* Keyboard */
@@ -280,7 +280,7 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
 			break;
 		case HID_DTYPE_HID:
 			Address = &ConfigurationDescriptor.HID_HIDData;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);			
+			Size    = sizeof(USB_HID_Descriptor_HID_t);
 			break;
 		case HID_DTYPE_Report:
 			Address = &HIDReport;
diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h
index 7d9b06680..a0d99d433 100644
--- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h
+++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h
@@ -62,7 +62,7 @@
 
 		/** Size in bytes of each of the HID reporting IN endpoint. */
 		#define HID_EPSIZE                8
-	
+
 	/* Enums: */
 		/** Enum for the HID report IDs used in the device. */
 		enum
diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c
index a3c0abe6b..4b6a86d89 100644
--- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c
+++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c
@@ -148,7 +148,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn
 	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
 
 	if (!(ButtonStatus_LCL & BUTTONS_BUTTON1))
-	{		
+	{
 		USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData;
 
 		KeyboardReport->Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
@@ -221,3 +221,4 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI
 
 	LEDs_SetAllLEDs(LEDMask);
 }
+
diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c
index 66b58a124..fb4673900 100644
--- a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c
+++ b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c
@@ -287,7 +287,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
 		               SCSI_ASENSE_WRITE_PROTECTED,
 		               SCSI_ASENSEQ_NO_QUALIFIER);
 
-		return false;		
+		return false;
 	}
 
 	/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
@@ -311,7 +311,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
 	/* Adjust the given block address to the real media address based on the selected LUN */
 	BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS);
 	#endif
-	
+
 	/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
 	if (IsDataRead == DATA_READ)
 	  DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
@@ -345,3 +345,4 @@ static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfac
 
 	return true;
 }
+
diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.h b/Demos/Device/ClassDriver/MassStorage/MassStorage.h
index 9d926ea92..3215333ca 100644
--- a/Demos/Device/ClassDriver/MassStorage/MassStorage.h
+++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.h
@@ -73,7 +73,7 @@
 
 		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
 		#define LUN_MEDIA_BLOCKS         (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
-		
+
 		/** Indicates if the disk is write protected or not. */
 		#define DISK_READ_ONLY            false
 
diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c
index 717d17286..fb4673900 100644
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c
@@ -287,7 +287,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
 		               SCSI_ASENSE_WRITE_PROTECTED,
 		               SCSI_ASENSEQ_NO_QUALIFIER);
 
-		return false;		
+		return false;
 	}
 
 	/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
@@ -345,3 +345,4 @@ static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfac
 
 	return true;
 }
+
diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h
index 94cb6586a..ca78a6f04 100644
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h
@@ -81,7 +81,7 @@
 
 		/** Indicates if the disk is write protected or not. */
 		#define DISK_READ_ONLY           false
-		
+
 	/* Function Prototypes: */
 		void SetupHardware(void);
 
diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c
index adcb2939a..b53b0242d 100644
--- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c
+++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c
@@ -87,16 +87,16 @@ int main(void)
 		if (RNDIS_Device_IsPacketReceived(&Ethernet_RNDIS_Interface))
 		{
 			LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-			
+
 			RNDIS_Device_ReadPacket(&Ethernet_RNDIS_Interface, &FrameIN.FrameData, &FrameIN.FrameLength);
 			Ethernet_ProcessPacket(&FrameIN, &FrameOUT);
-			
+
 			if (FrameOUT.FrameLength)
 			{
-				RNDIS_Device_SendPacket(&Ethernet_RNDIS_Interface, &FrameOUT.FrameData, FrameOUT.FrameLength);				
+				RNDIS_Device_SendPacket(&Ethernet_RNDIS_Interface, &FrameOUT.FrameData, FrameOUT.FrameLength);
 				FrameOUT.FrameLength = 0;
 			}
-			
+
 			LEDs_SetAllLEDs(LEDMASK_USB_READY);
 		}
 
diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.c b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.c
index 66b58a124..fb4673900 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.c
+++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.c
@@ -287,7 +287,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
 		               SCSI_ASENSE_WRITE_PROTECTED,
 		               SCSI_ASENSEQ_NO_QUALIFIER);
 
-		return false;		
+		return false;
 	}
 
 	/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
@@ -311,7 +311,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
 	/* Adjust the given block address to the real media address based on the selected LUN */
 	BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS);
 	#endif
-	
+
 	/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
 	if (IsDataRead == DATA_READ)
 	  DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
@@ -345,3 +345,4 @@ static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfac
 
 	return true;
 }
+
diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c
index 975067fd4..402092319 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c
+++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c
@@ -59,7 +59,7 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
 				.NotificationEndpointDoubleBank = false,
 			},
 	};
-	
+
 /** LUFA Mass Storage Class driver interface configuration and state information. This structure is
  *  passed to all Mass Storage Class driver functions, so that multiple instances of the same class
  *  within a device can be differentiated from one another.
@@ -211,3 +211,4 @@ bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSI
 
 	return CommandSuccess;
 }
+
diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h
index 7bb11d0c3..07b7420bd 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h
+++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h
@@ -47,7 +47,7 @@
 
 		#include "Lib/SCSI.h"
 		#include "Lib/DataflashManager.h"
-		
+
 		#include <LUFA/Version.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/Board/Joystick.h>
@@ -74,7 +74,7 @@
 
 		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
 		#define LUN_MEDIA_BLOCKS         (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
-		
+
 		/** Indicates if the disk is write protected or not. */
 		#define DISK_READ_ONLY            false
 
diff --git a/Demos/Device/Incomplete/Sideshow/Descriptors.h b/Demos/Device/Incomplete/Sideshow/Descriptors.h
index e24d37e0e..4b5b9520d 100644
--- a/Demos/Device/Incomplete/Sideshow/Descriptors.h
+++ b/Demos/Device/Incomplete/Sideshow/Descriptors.h
@@ -47,7 +47,7 @@
 		typedef struct
 		{
 			USB_Descriptor_Configuration_Header_t Config;
-			
+
 			// SideShow Interface
 			USB_Descriptor_Interface_t            SSHOW_Interface;
 			USB_Descriptor_Endpoint_t             SSHOW_DataInEndpoint;
diff --git a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommon.h b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommon.h
index 794b91e9e..98023ec94 100644
--- a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommon.h
+++ b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommon.h
@@ -102,3 +102,4 @@
 		void     SideShow_Discard_Byte_Stream(void);
 
 #endif
+
diff --git a/Demos/Device/Incomplete/Sideshow/Lib/SideshowContent.h b/Demos/Device/Incomplete/Sideshow/Lib/SideshowContent.h
index 452aad802..270010e0c 100644
--- a/Demos/Device/Incomplete/Sideshow/Lib/SideshowContent.h
+++ b/Demos/Device/Incomplete/Sideshow/Lib/SideshowContent.h
@@ -125,3 +125,4 @@
 		#endif
 
 #endif
+
diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
index 3b8c29586..0d2c96672 100644
--- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
+++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2011.
-              
+
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -38,7 +38,7 @@ TMC_Capabilities_t Capabilities =
 	{
 		.Status     = TMC_STATUS_SUCCESS,
 		.TMCVersion = VERSION_BCD(1.00),
-		
+
 		.Interface  =
 			{
 				.ListenOnly             = false,
@@ -82,7 +82,7 @@ int main(void)
 
 	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
 	sei();
-	
+
 	for (;;)
 	{
 		TMC_Task();
@@ -99,7 +99,7 @@ void SetupHardware(void)
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
-	
+
 	/* Hardware Initialization */
 	LEDs_Init();
 	USB_Init();
@@ -167,43 +167,43 @@ void EVENT_USB_Device_ControlRequest(void)
 				{
 					/* Indicate that all in-progress/pending data OUT requests should be aborted */
 					IsTMCBulkOUTReset = true;
-					
+
 					/* Save the split request for later checking when a new request is received */
 					RequestInProgress = Req_InitiateAbortBulkOut;
 				}
 
 				Endpoint_ClearSETUP();
-				
+
 				/* Write the request response byte */
 				Endpoint_Write_8(TMCRequestStatus);
 
 				Endpoint_ClearIN();
 				Endpoint_ClearStatusStage();
 			}
-			
+
 			break;
 		case Req_CheckAbortBulkOutStatus:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
 			{
 				/* Check that an ABORT BULK OUT transaction has been requested and that the request has completed */
 				if (RequestInProgress != Req_InitiateAbortBulkOut)
-				  TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;				
+				  TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;
 				else if (IsTMCBulkOUTReset)
 				  TMCRequestStatus = TMC_STATUS_PENDING;
 				else
-				  RequestInProgress = 0;	
+				  RequestInProgress = 0;
 
 				Endpoint_ClearSETUP();
-								
+
 				/* Write the request response bytes */
 				Endpoint_Write_8(TMCRequestStatus);
 				Endpoint_Write_16_LE(0);
 				Endpoint_Write_32_LE(LastTransferLength);
 
 				Endpoint_ClearIN();
-				Endpoint_ClearStatusStage();				
+				Endpoint_ClearStatusStage();
 			}
-			
+
 			break;
 		case Req_InitiateAbortBulkIn:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
@@ -211,7 +211,7 @@ void EVENT_USB_Device_ControlRequest(void)
 				/* Check that no split transaction is already in progress and the data transfer tag is valid */
 				if (RequestInProgress != 0)
 				{
-					TMCRequestStatus = TMC_STATUS_SPLIT_IN_PROGRESS;				
+					TMCRequestStatus = TMC_STATUS_SPLIT_IN_PROGRESS;
 				}
 				else if (USB_ControlRequest.wValue != CurrentTransferTag)
 				{
@@ -221,13 +221,13 @@ void EVENT_USB_Device_ControlRequest(void)
 				{
 					/* Indicate that all in-progress/pending data IN requests should be aborted */
 					IsTMCBulkINReset = true;
-					
+
 					/* Save the split request for later checking when a new request is received */
 					RequestInProgress = Req_InitiateAbortBulkIn;
 				}
 
 				Endpoint_ClearSETUP();
-				
+
 				/* Write the request response bytes */
 				Endpoint_Write_8(TMCRequestStatus);
 				Endpoint_Write_8(CurrentTransferTag);
@@ -235,7 +235,7 @@ void EVENT_USB_Device_ControlRequest(void)
 				Endpoint_ClearIN();
 				Endpoint_ClearStatusStage();
 			}
-			
+
 			break;
 		case Req_CheckAbortBulkInStatus:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
@@ -249,7 +249,7 @@ void EVENT_USB_Device_ControlRequest(void)
 				  RequestInProgress = 0;
 
 				Endpoint_ClearSETUP();
-								
+
 				/* Write the request response bytes */
 				Endpoint_Write_8(TMCRequestStatus);
 				Endpoint_Write_16_LE(0);
@@ -258,7 +258,7 @@ void EVENT_USB_Device_ControlRequest(void)
 				Endpoint_ClearIN();
 				Endpoint_ClearStatusStage();
 			}
-			
+
 			break;
 		case Req_InitiateClear:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
@@ -266,34 +266,34 @@ void EVENT_USB_Device_ControlRequest(void)
 				/* Check that no split transaction is already in progress */
 				if (RequestInProgress != 0)
 				{
-					Endpoint_Write_8(TMC_STATUS_SPLIT_IN_PROGRESS);				
+					Endpoint_Write_8(TMC_STATUS_SPLIT_IN_PROGRESS);
 				}
 				else
 				{
 					/* Indicate that all in-progress/pending data IN and OUT requests should be aborted */
 					IsTMCBulkINReset  = true;
 					IsTMCBulkOUTReset = true;
-					
+
 					/* Save the split request for later checking when a new request is received */
 					RequestInProgress = Req_InitiateClear;
 				}
 
 				Endpoint_ClearSETUP();
-				
+
 				/* Write the request response byte */
 				Endpoint_Write_8(TMCRequestStatus);
 
 				Endpoint_ClearIN();
 				Endpoint_ClearStatusStage();
 			}
-			
+
 			break;
 		case Req_CheckClearStatus:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
 			{
 				/* Check that a CLEAR transaction has been requested and that the request has completed */
 				if (RequestInProgress != Req_InitiateClear)
-				  TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;				
+				  TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;
 				else if (IsTMCBulkINReset || IsTMCBulkOUTReset)
 				  TMCRequestStatus = TMC_STATUS_PENDING;
 				else
@@ -304,22 +304,22 @@ void EVENT_USB_Device_ControlRequest(void)
 				/* Write the request response bytes */
 				Endpoint_Write_8(TMCRequestStatus);
 				Endpoint_Write_8(0);
-				
+
 				Endpoint_ClearIN();
-				Endpoint_ClearStatusStage();				
+				Endpoint_ClearStatusStage();
 			}
-			
+
 			break;
 		case Req_GetCapabilities:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
 			{
 				Endpoint_ClearSETUP();
-					
+
 				/* Write the device capabilities to the control endpoint */
-				Endpoint_Write_Control_Stream_LE(&Capabilities, sizeof(TMC_Capabilities_t));				
+				Endpoint_Write_Control_Stream_LE(&Capabilities, sizeof(TMC_Capabilities_t));
 				Endpoint_ClearOUT();
 			}
-			
+
 			break;
 	}
 }
@@ -351,16 +351,16 @@ void TMC_Task(void)
 	/* Device must be connected and configured for the task to run */
 	if (USB_DeviceState != DEVICE_STATE_Configured)
 	  return;
-	
+
 	TMC_MessageHeader_t MessageHeader;
 	uint8_t             MessagePayload[128];
-	
+
 	/* Try to read in a TMC message from the interface, process if one is available */
 	if (ReadTMCHeader(&MessageHeader))
 	{
 		/* Indicate busy */
 		LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-		
+
 		switch (MessageHeader.MessageID)
 		{
 			case TMC_MESSAGEID_DEV_DEP_MSG_OUT:
@@ -371,15 +371,15 @@ void TMC_Task(void)
 					if (IsTMCBulkOUTReset)
 					  break;
 				}
-				
+
 				Endpoint_ClearOUT();
 
-				ProcessSentMessage(MessagePayload, LastTransferLength);				
+				ProcessSentMessage(MessagePayload, LastTransferLength);
 				break;
 			case TMC_MESSAGEID_DEV_DEP_MSG_IN:
 				Endpoint_ClearOUT();
-				
-				MessageHeader.TransferSize = GetNextMessage(MessagePayload);				
+
+				MessageHeader.TransferSize = GetNextMessage(MessagePayload);
 				MessageHeader.MessageIDSpecific.DeviceOUT.LastMessageTransaction = true;
 				WriteTMCHeader(&MessageHeader);
 
@@ -400,7 +400,7 @@ void TMC_Task(void)
 
 		LEDs_SetAllLEDs(LEDMASK_USB_READY);
 	}
-	
+
 	/* All pending data has been processed - reset the data abort flags */
 	IsTMCBulkINReset  = false;
 	IsTMCBulkOUTReset = false;
@@ -419,11 +419,11 @@ bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader)
 
 	/* Select the Data Out endpoint */
 	Endpoint_SelectEndpoint(TMC_OUT_EPNUM);
-	
+
 	/* Abort if no command has been sent from the host */
 	if (!(Endpoint_IsOUTReceived()))
 	  return false;
-	
+
 	/* Read in the header of the command from the host */
 	BytesTransferred = 0;
 	while ((ErrorCode = Endpoint_Read_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), &BytesTransferred)) ==
@@ -435,7 +435,7 @@ bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader)
 
 	/* Store the new command tag value for later use */
 	CurrentTransferTag = MessageHeader->Tag;
-	
+
 	/* Indicate if the command has been aborted or not */
 	return (!(IsTMCBulkOUTReset) && (ErrorCode == ENDPOINT_RWSTREAM_NoError));
 }
@@ -464,3 +464,4 @@ bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader)
 	/* Indicate if the command has been aborted or not */
 	return (!(IsTMCBulkINReset) && (ErrorCode == ENDPOINT_RWSTREAM_NoError));
 }
+
diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.c b/Demos/Device/LowLevel/AudioInput/AudioInput.c
index 52fbb8bd6..ff165b25c 100644
--- a/Demos/Device/LowLevel/AudioInput/AudioInput.c
+++ b/Demos/Device/LowLevel/AudioInput/AudioInput.c
@@ -163,16 +163,16 @@ void EVENT_USB_Device_ControlRequest(void)
 				/* Extract out the relevant request information to get the target Endpoint address and control being set */
 				uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
 				uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
-				
+
 				/* Only handle SET CURRENT requests to the audio endpoint's sample frequency property */
 				if ((EndpointAddress == (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
 				{
 					uint8_t SampleRate[3];
-				
+
 					Endpoint_ClearSETUP();
 					Endpoint_Read_Control_Stream_LE(SampleRate, sizeof(SampleRate));
 					Endpoint_ClearIN();
-					
+
 					/* Set the new sampling frequency to the value given by the host */
 					CurrentAudioSampleFrequency = (((uint32_t)SampleRate[2] << 16) | ((uint32_t)SampleRate[1] << 8) | (uint32_t)SampleRate[0]);
 
@@ -180,7 +180,7 @@ void EVENT_USB_Device_ControlRequest(void)
 					OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
 				}
 			}
-			
+
 			break;
 		case AUDIO_REQ_GetCurrent:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
@@ -188,20 +188,20 @@ void EVENT_USB_Device_ControlRequest(void)
 				/* Extract out the relevant request information to get the target Endpoint address and control being retrieved */
 				uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
 				uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
-				
+
 				/* Only handle GET CURRENT requests to the audio endpoint's sample frequency property */
 				if ((EndpointAddress == (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
 				{
 					uint8_t SampleRate[3];
-					
+
 					/* Convert the sampling rate value into the 24-bit format the host expects for the property */
 					SampleRate[2] = (CurrentAudioSampleFrequency >> 16);
 					SampleRate[1] = (CurrentAudioSampleFrequency >> 8);
 					SampleRate[0] = (CurrentAudioSampleFrequency &  0xFF);
-				
+
 					Endpoint_ClearSETUP();
 					Endpoint_Write_Control_Stream_LE(SampleRate, sizeof(SampleRate));
-					Endpoint_ClearOUT();					
+					Endpoint_ClearOUT();
 				}
 			}
 
@@ -225,11 +225,11 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
 		#if defined(USE_TEST_TONE)
 			static uint8_t SquareWaveSampleCount;
 			static int16_t CurrentWaveValue;
-			
+
 			/* In test tone mode, generate a square wave at 1/256 of the sample rate */
 			if (SquareWaveSampleCount++ == 0xFF)
 			  CurrentWaveValue ^= 0x8000;
-			
+
 			/* Only generate audio if the board button is being pressed */
 			AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;
 		#else
@@ -239,7 +239,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
 			#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)
 			/* Microphone is biased to half rail voltage, subtract the bias from the sample value */
 			AudioSample -= (SAMPLE_MAX_RANGE / 2);
-			#endif		
+			#endif
 		#endif
 
 		/* Write the sample to the buffer */
diff --git a/Demos/Device/LowLevel/AudioInput/Descriptors.c b/Demos/Device/LowLevel/AudioInput/Descriptors.c
index ee9feb39d..b41e60468 100644
--- a/Demos/Device/LowLevel/AudioInput/Descriptors.c
+++ b/Demos/Device/LowLevel/AudioInput/Descriptors.c
@@ -204,7 +204,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 
 			.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t)),
 		},
-	
+
 	.Audio_AudioFormatSampleRates =
 		{
 			AUDIO_SAMPLE_FREQ(8000),
diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c
index 47f3ccb27..f079dca0f 100644
--- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c
+++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c
@@ -189,16 +189,16 @@ void EVENT_USB_Device_ControlRequest(void)
 				/* Extract out the relevant request information to get the target Endpoint address and control being set */
 				uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
 				uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
-				
+
 				/* Only handle SET CURRENT requests to the audio endpoint's sample frequency property */
 				if ((EndpointAddress == (ENDPOINT_DIR_OUT | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
 				{
 					uint8_t SampleRate[3];
-				
+
 					Endpoint_ClearSETUP();
 					Endpoint_Read_Control_Stream_LE(SampleRate, sizeof(SampleRate));
 					Endpoint_ClearOUT();
-					
+
 					/* Set the new sampling frequency to the value given by the host */
 					CurrentAudioSampleFrequency = (((uint32_t)SampleRate[2] << 16) | ((uint32_t)SampleRate[1] << 8) | (uint32_t)SampleRate[0]);
 
@@ -206,7 +206,7 @@ void EVENT_USB_Device_ControlRequest(void)
 					OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
 				}
 			}
-			
+
 			break;
 		case AUDIO_REQ_GetCurrent:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT))
@@ -214,20 +214,20 @@ void EVENT_USB_Device_ControlRequest(void)
 				/* Extract out the relevant request information to get the target Endpoint address and control being retrieved */
 				uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
 				uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
-				
+
 				/* Only handle GET CURRENT requests to the audio endpoint's sample frequency property */
 				if ((EndpointAddress == (ENDPOINT_DIR_OUT | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
 				{
 					uint8_t SampleRate[3];
-					
+
 					/* Convert the sampling rate value into the 24-bit format the host expects for the property */
 					SampleRate[2] = (CurrentAudioSampleFrequency >> 16);
 					SampleRate[1] = (CurrentAudioSampleFrequency >> 8);
 					SampleRate[0] = (CurrentAudioSampleFrequency &  0xFF);
-				
+
 					Endpoint_ClearSETUP();
 					Endpoint_Write_Control_Stream_LE(SampleRate, sizeof(SampleRate));
-					Endpoint_ClearOUT();					
+					Endpoint_ClearOUT();
 				}
 			}
 
@@ -286,7 +286,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
 
 		LEDs_SetAllLEDs(LEDMask);
 	}
-	
+
 	Endpoint_SelectEndpoint(PrevEndpoint);
 }
 
diff --git a/Demos/Device/LowLevel/AudioOutput/Descriptors.c b/Demos/Device/LowLevel/AudioOutput/Descriptors.c
index 0fa396daf..771ec17a7 100644
--- a/Demos/Device/LowLevel/AudioOutput/Descriptors.c
+++ b/Demos/Device/LowLevel/AudioOutput/Descriptors.c
@@ -204,7 +204,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 
 			.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t)),
 		},
-	
+
 	.Audio_AudioFormatSampleRates =
 		{
 			AUDIO_SAMPLE_FREQ(8000),
diff --git a/Demos/Device/LowLevel/AudioOutput/Descriptors.h b/Demos/Device/LowLevel/AudioOutput/Descriptors.h
index da95077c4..aa551b00c 100644
--- a/Demos/Device/LowLevel/AudioOutput/Descriptors.h
+++ b/Demos/Device/LowLevel/AudioOutput/Descriptors.h
@@ -83,3 +83,4 @@
 		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
 
 #endif
+
diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h
index a007baab6..2fe3b89f6 100644
--- a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h
+++ b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h
@@ -109,3 +109,4 @@
 		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
 
 #endif
+
diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.c b/Demos/Device/LowLevel/GenericHID/GenericHID.c
index 69c417655..a3d2e69eb 100644
--- a/Demos/Device/LowLevel/GenericHID/GenericHID.c
+++ b/Demos/Device/LowLevel/GenericHID/GenericHID.c
@@ -157,7 +157,7 @@ void ProcessGenericHIDReport(uint8_t* DataArray)
 		holding the report sent from the host.
 	*/
 
-	uint8_t NewLEDMask = LEDS_NO_LEDS;	
+	uint8_t NewLEDMask = LEDS_NO_LEDS;
 
 	if (DataArray[0])
 	  NewLEDMask |= LEDS_LED1;
@@ -170,7 +170,7 @@ void ProcessGenericHIDReport(uint8_t* DataArray)
 
 	if (DataArray[3])
 	  NewLEDMask |= LEDS_LED1;
-	  
+
 	LEDs_SetAllLEDs(NewLEDMask);
 }
 
@@ -187,7 +187,7 @@ void CreateGenericHIDReport(uint8_t* DataArray)
 	*/
 
 	uint8_t CurrLEDMask = LEDs_GetLEDs();
-		
+
 	DataArray[0] = ((CurrLEDMask & LEDS_LED1) ? 1 : 0);
 	DataArray[1] = ((CurrLEDMask & LEDS_LED2) ? 1 : 0);
 	DataArray[2] = ((CurrLEDMask & LEDS_LED3) ? 1 : 0);
diff --git a/Demos/Device/LowLevel/MassStorage/Descriptors.h b/Demos/Device/LowLevel/MassStorage/Descriptors.h
index 043d65994..b65938ea7 100644
--- a/Demos/Device/LowLevel/MassStorage/Descriptors.h
+++ b/Demos/Device/LowLevel/MassStorage/Descriptors.h
@@ -59,7 +59,7 @@
 		typedef struct
 		{
 			USB_Descriptor_Configuration_Header_t Config;
-			
+
 			// Mass Storage Interface
 			USB_Descriptor_Interface_t            MS_Interface;
 			USB_Descriptor_Endpoint_t             MS_DataInEndpoint;
diff --git a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c
index 432678612..0fd62c031 100644
--- a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c
+++ b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c
@@ -287,12 +287,12 @@ static bool SCSI_Command_ReadWrite_10(const bool IsDataRead)
 		               SCSI_ASENSE_WRITE_PROTECTED,
 		               SCSI_ASENSEQ_NO_QUALIFIER);
 
-		return false;		
+		return false;
 	}
 
 	BlockAddress = SwapEndian_32(*(uint32_t*)&CommandBlock.SCSICommandData[2]);
 	TotalBlocks  = SwapEndian_16(*(uint16_t*)&CommandBlock.SCSICommandData[7]);
-	
+
 	/* Check if the block address is outside the maximum allowable value for the LUN */
 	if (BlockAddress >= LUN_MEDIA_BLOCKS)
 	{
@@ -340,3 +340,4 @@ static bool SCSI_Command_ModeSense_6(void)
 
 	return true;
 }
+
diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.c b/Demos/Device/LowLevel/MassStorage/MassStorage.c
index 7f2d86610..abac8b71e 100644
--- a/Demos/Device/LowLevel/MassStorage/MassStorage.c
+++ b/Demos/Device/LowLevel/MassStorage/MassStorage.c
@@ -309,7 +309,8 @@ static void ReturnCommandStatus(void)
 		if (IsMassStoreReset)
 		  return;
 	}
-	
+
 	/* Finalize the stream transfer to send the last packet */
 	Endpoint_ClearIN();
 }
+
diff --git a/Demos/Device/LowLevel/Mouse/Descriptors.h b/Demos/Device/LowLevel/Mouse/Descriptors.h
index f88f530b2..60fd74084 100644
--- a/Demos/Device/LowLevel/Mouse/Descriptors.h
+++ b/Demos/Device/LowLevel/Mouse/Descriptors.h
@@ -49,7 +49,7 @@
 		typedef struct
 		{
 			USB_Descriptor_Configuration_Header_t Config;
-			
+
 			// Mouse HID Interface
 			USB_Descriptor_Interface_t            HID_Interface;
 			USB_HID_Descriptor_HID_t              HID_MouseHID;
diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
index 9ad26dd2f..d0df97309 100644
--- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
+++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
@@ -73,9 +73,9 @@ void SetupHardware(void)
 	LEDs_Init();
 	Serial_Init(9600, false);
 	USB_Init();
-	
+
 	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);	
+	Serial_CreateStream(NULL);
 }
 
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and