diff options
| author | Dean Camera <dean@fourwalledcubicle.com> | 2010-09-24 06:45:11 +0000 |
|---|---|---|
| committer | Dean Camera <dean@fourwalledcubicle.com> | 2010-09-24 06:45:11 +0000 |
| commit | bd85422d2beb8b14e617839b7d05e7306df83edc (patch) | |
| tree | 0f3d77d6edb3549fafa5a6e89aea371be0697251 /Demos/Device | |
| parent | b48095c0fbd9774413702b0226ef72926034e6c6 (diff) | |
| download | lufa-bd85422d2beb8b14e617839b7d05e7306df83edc.tar.gz lufa-bd85422d2beb8b14e617839b7d05e7306df83edc.tar.bz2 lufa-bd85422d2beb8b14e617839b7d05e7306df83edc.zip | |
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
Diffstat (limited to 'Demos/Device')
28 files changed, 84 insertions, 84 deletions
diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile index 86f34e6ce..470f83211 100644 --- a/Demos/Device/ClassDriver/AudioInput/makefile +++ b/Demos/Device/ClassDriver/AudioInput/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -523,7 +523,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -534,7 +534,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile index e1b0dd81c..8f2978b8a 100644 --- a/Demos/Device/ClassDriver/AudioOutput/makefile +++ b/Demos/Device/ClassDriver/AudioOutput/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -525,7 +525,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -536,7 +536,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile index da7c7ca2f..e270575e2 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile +++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile index 810912163..b2a80ea86 100644 --- a/Demos/Device/ClassDriver/GenericHID/makefile +++ b/Demos/Device/ClassDriver/GenericHID/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile index 40ace20d1..37431cd8e 100644 --- a/Demos/Device/ClassDriver/Joystick/makefile +++ b/Demos/Device/ClassDriver/Joystick/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile index b392752c8..9fe72e23e 100644 --- a/Demos/Device/ClassDriver/Keyboard/makefile +++ b/Demos/Device/ClassDriver/Keyboard/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile index b7dbd1f63..115759ed8 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/makefile +++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile index 038f0446a..e6aec7eb6 100644 --- a/Demos/Device/ClassDriver/MIDI/makefile +++ b/Demos/Device/ClassDriver/MIDI/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile index 390adaecb..6ec34ec73 100644 --- a/Demos/Device/ClassDriver/MassStorage/makefile +++ b/Demos/Device/ClassDriver/MassStorage/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -524,7 +524,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile index 154c3e1ee..bc1b9ce14 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -524,7 +524,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile index c7cb09a33..306f2e683 100644 --- a/Demos/Device/ClassDriver/Mouse/makefile +++ b/Demos/Device/ClassDriver/Mouse/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile index 59226883d..758a77f82 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/makefile +++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -540,7 +540,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -551,7 +551,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile index 52a8cce58..d40208c39 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/makefile +++ b/Demos/Device/ClassDriver/VirtualSerial/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile index 240628d34..7e2bd6d49 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile index f62ffc7ff..288188a89 100644 --- a/Demos/Device/Incomplete/Sideshow/makefile +++ b/Demos/Device/Incomplete/Sideshow/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -527,7 +527,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -538,7 +538,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/Incomplete/TestAndMeasurement/makefile b/Demos/Device/Incomplete/TestAndMeasurement/makefile index c7f41ebde..7b2a5b102 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/makefile +++ b/Demos/Device/Incomplete/TestAndMeasurement/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile index 86bc0948c..3e4273a73 100644 --- a/Demos/Device/LowLevel/AudioInput/makefile +++ b/Demos/Device/LowLevel/AudioInput/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -522,7 +522,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -533,7 +533,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile index bf189c309..86bb0b791 100644 --- a/Demos/Device/LowLevel/AudioOutput/makefile +++ b/Demos/Device/LowLevel/AudioOutput/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -524,7 +524,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile index fbd5d459b..40b5a2c2f 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/makefile +++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile index 9fa56a550..be6da3c6b 100644 --- a/Demos/Device/LowLevel/GenericHID/makefile +++ b/Demos/Device/LowLevel/GenericHID/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile index 553a89aee..49697f7ab 100644 --- a/Demos/Device/LowLevel/Joystick/makefile +++ b/Demos/Device/LowLevel/Joystick/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile index a7fcdbb2c..3794c5088 100644 --- a/Demos/Device/LowLevel/Keyboard/makefile +++ b/Demos/Device/LowLevel/Keyboard/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile index d59329848..dcd70e04b 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/makefile +++ b/Demos/Device/LowLevel/KeyboardMouse/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile index 784709d4a..45a8c06be 100644 --- a/Demos/Device/LowLevel/MIDI/makefile +++ b/Demos/Device/LowLevel/MIDI/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile index 9f740fb3b..b55334b92 100644 --- a/Demos/Device/LowLevel/MassStorage/makefile +++ b/Demos/Device/LowLevel/MassStorage/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -523,7 +523,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -534,7 +534,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile index af82d9aaf..99467e769 100644 --- a/Demos/Device/LowLevel/Mouse/makefile +++ b/Demos/Device/LowLevel/Mouse/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile index 0bb88470e..ed17d3662 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/makefile +++ b/Demos/Device/LowLevel/RNDISEthernet/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -541,7 +541,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -552,7 +552,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile index dacd22e8d..89ad42ca4 100644 --- a/Demos/Device/LowLevel/VirtualSerial/makefile +++ b/Demos/Device/LowLevel/VirtualSerial/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset |