Port the device mode demos to the XMEGA architecture where applicable.

5 files changed, 66 insertions, 5 deletions

diff --git a/Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h b/Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h
index 3244d3bb7..3871759b6 100644
--- a/Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h
+++ b/Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h
@@ -85,6 +85,39 @@
 //		#define NO_AUTO_VBUS_MANAGEMENT
 //		#define INVERTED_VBUS_ENABLE_LINE
 
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               1
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
 	#else
 
 		#error Unsupported architecture for this LUFA configuration file.
diff --git a/Demos/Device/LowLevel/Mouse/Mouse.c b/Demos/Device/LowLevel/Mouse/Mouse.c
index 7575a81f5..601eebec5 100644
--- a/Demos/Device/LowLevel/Mouse/Mouse.c
+++ b/Demos/Device/LowLevel/Mouse/Mouse.c
@@ -73,12 +73,24 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
 
 	/* Hardware Initialization */
 	Joystick_Init();
diff --git a/Demos/Device/LowLevel/Mouse/Mouse.h b/Demos/Device/LowLevel/Mouse/Mouse.h
index e11b1fac8..23cf1335c 100644
--- a/Demos/Device/LowLevel/Mouse/Mouse.h
+++ b/Demos/Device/LowLevel/Mouse/Mouse.h
@@ -45,11 +45,12 @@
 		#include <string.h>
 
 		#include "Descriptors.h"
-		
+
 		#include <LUFA/Drivers/USB/USB.h>
 		#include <LUFA/Drivers/Board/Joystick.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/Board/Buttons.h>
+		#include <LUFA/Platform/Platform.h>
 
 	/* Macros: */
 		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
diff --git a/Demos/Device/LowLevel/Mouse/Mouse.txt b/Demos/Device/LowLevel/Mouse/Mouse.txt
index 0664cba63..7f1c38430 100644
--- a/Demos/Device/LowLevel/Mouse/Mouse.txt
+++ b/Demos/Device/LowLevel/Mouse/Mouse.txt
@@ -14,6 +14,9 @@
  *  \li Series 6 USB AVRs (AT90USBxxx6)
  *  \li Series 4 USB AVRs (ATMEGAxxU4)
  *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
  *
  *  \section Sec_Info USB Information:
  *
diff --git a/Demos/Device/LowLevel/Mouse/asf.xml b/Demos/Device/LowLevel/Mouse/asf.xml
index ed0c537c8..0f471ff08 100644
--- a/Demos/Device/LowLevel/Mouse/asf.xml
+++ b/Demos/Device/LowLevel/Mouse/asf.xml
@@ -1,14 +1,26 @@
 <asf xmlversion="1.0">

-	<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example">

+	<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.avr8">

 		<require idref="lufa.demos.device.lowlevel.mouse"/>

 		<require idref="lufa.boards.dummy.avr8"/>

 		<generator value="as5_8"/>

 

 		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

+		<config name="lufa.drivers.board.name" value="none"/>

 

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

+		<build type="define" name="F_CPU" value="16000000UL"/>

+		<build type="define" name="F_USB" value="16000000UL"/>

+	</project>

+

+	<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.xmega">

+		<require idref="lufa.demos.device.lowlevel.mouse"/>

+		<require idref="lufa.boards.dummy.xmega"/>

+		<generator value="as5_8"/>

+

+		<device-support value="atxmega128a1u"/>

+		<config name="lufa.drivers.board.name" value="none"/>

+

+		<build type="define" name="F_CPU" value="32000000UL"/>

+		<build type="define" name="F_USB" value="48000000UL"/>

 	</project>

 

 	<module type="application" id="lufa.demos.device.lowlevel.mouse" caption="Mouse HID Device Demo (Low Level APIs)">