Move new Class Driver powered demos to a new ClassDriver subdirectory, re-add old low level demos to a LowLevel subdirectory.

1 files changed, 83 insertions, 0 deletions

diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.txt b/Demos/Device/LowLevel/MassStorage/MassStorage.txt
new file mode 100644
index 000000000..1d06cb66d
--- /dev/null
+++ b/Demos/Device/LowLevel/MassStorage/MassStorage.txt
@@ -0,0 +1,83 @@
+/** \file

+ *

+ *  This file contains special DoxyGen information for the generation of the main page and other special

+ *  documentation pages. It is not a project source file.

+ */

+ 

+/** \mainpage Mass Storage Device Demo

+ *

+ *  \section SSec_Info USB Information:

+ *

+ *  The following table gives a rundown of the USB utilization of this demo.

+ *

+ *  <table>

+ *   <tr>

+ *    <td><b>USB Mode:</b></td>

+ *    <td>Device</td>

+ *   </tr>

+ *   <tr>

+ *    <td><b>USB Class:</b></td>

+ *    <td>Mass Storage Device</td>

+ *   </tr>

+ *   <tr> 

+ *    <td><b>USB Subclass:</b></td>

+ *    <td>Bulk-Only Transport</td>

+ *   </tr>

+ *   <tr>

+ *    <td><b>Relevant Standards:</b></td>

+ *    <td>USBIF Mass Storage Standard</td>

+ *    <td>USB Bulk-Only Transport Standard</td>

+ *    <td>SCSI Primary Commands Specification</td>

+ *    <td>SCSI Block Commands Specification</td>

+ *   </tr>

+ *   <tr>

+ *    <td><b>Usable Speeds:</b></td>

+ *    <td>Full Speed Mode</td>

+ *   </tr>

+ *  </table>

+ *

+ *  \section SSec_Description Project Description: 

+ *

+ *  Dual LUN Mass Storage demonstration application. This gives a simple

+ *  reference application for implementing a multiple LUN USB Mass Storage

+ *  device using the basic USB UFI drivers in all modern OSes (i.e. no

+ *  special drivers required).

+ *  

+ *  On start-up the system will automatically enumerate and function as an

+ *  external mass storage device with two LUNs (separate disks) which may

+ *  be formatted and used in the same manner as commercial USB Mass Storage

+ *  devices.

+ *  	

+ *  You will need to format the mass storage drives upon first run of this

+ *  demonstration - as the device acts only as a data block transport between

+ *  the host and the storage media, it does not matter what file system is used,

+ *  as the data interpretation is performed by the host and not the USB device.

+ *  

+ *  This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS

+ *  value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to

+ *  255), with each LUN being allocated an equal portion of the available

+ *  Dataflash memory.

+ *

+ *  The USB control endpoint is managed entirely by the library using endpoint

+ *  interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for

+ *  the host to reset the Mass Storage device state during long transfers without

+ *  the need for complicated polling logic.

+ *

+ *  \section SSec_Options Project Options

+ *

+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

+ *

+ *  <table>

+ *   <tr>

+ *    <td><b>Define Name:</b></td>

+ *    <td><b>Location:</b></td>

+ *    <td><b>Description:</b></td>

+ *   </tr>

+ *   <tr>

+ *    <td>TOTAL_LUNS</td>

+ *    <td>MassStorage.h</td>

+ *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive

+ *        - this can be set to any positive non-zero amount.</td>

+ *   </tr>

+ *  </table>

+ */