Clean up and speed up build tests by turning off expensive and slow size optimizations, and generation of assembly listings (*.lst) for each compiled source file.

4 files changed, 28 insertions, 25 deletions

diff --git a/BuildTests/BoardDriverTest/makefile b/BuildTests/BoardDriverTest/makefile
index bc4d55977..68180c221 100644
--- a/BuildTests/BoardDriverTest/makefile
+++ b/BuildTests/BoardDriverTest/makefile
@@ -31,23 +31,23 @@ makeboardlist:
 testboards:

 	@echo "buildtest:" > BuildMakefile

 	

-	@while read line; \

-	 do \

-	   build_cfg=`grep "$$line " BoardDeviceMap.cfg | sed 's/ //g' | grep -v "#" | cut -d'=' -f2-`; \

-	   \

-	   build_board=$$line; \

-	   build_arch=`echo $$build_cfg | cut -d':' -f1`; \

-	   build_mcu=`echo $$build_cfg | cut -d':' -f2`; \

-	   \

-	   if ( test -z "$$build_cfg" ); then \

-	     echo "No matching information set for board $$build_board"; \

-	   else \

+	@while read line;                                                         \

+	 do                                                                       \

+	   build_cfg=`grep "$$line " BoardDeviceMap.cfg | grep -v "#" | cut -d'=' -f2- | sed 's/ //g'`; \

+	                                                                          \

+	   build_board=$$line;                                                    \

+	   build_arch=`echo $$build_cfg | cut -d':' -f1`;                         \

+	   build_mcu=`echo $$build_cfg | cut -d':' -f2`;                          \

+	                                                                          \

+	   if ( test -z "$$build_cfg" ); then                                     \

+	     echo "No matching information set for board $$build_board";          \

+	   else                                                                   \

 	     echo "Found board configuration for $$build_board - $$build_arch, $$build_mcu"; \

-		 \

+		                                                                      \

 		 printf "\t@echo Building dummy project for $$build_board...\n" >> BuildMakefile; \

 		 printf "\tmake -s -f makefile.%s clean\n" $$build_arch >> BuildMakefile; \

 		 printf "\tmake -s -f makefile.%s MCU=%s BOARD=%s elf\n\n" $$build_arch $$build_mcu $$build_board >> BuildMakefile; \

-	   fi; \

+	   fi;                                                                    \

 	 done < BoardList.txt

 	 

 	 $(MAKE) -f BuildMakefile buildtest

diff --git a/BuildTests/BoardDriverTest/makefile.avr8 b/BuildTests/BoardDriverTest/makefile.avr8
index 1f0d7596f..eed8b305d 100644
--- a/BuildTests/BoardDriverTest/makefile.avr8
+++ b/BuildTests/BoardDriverTest/makefile.avr8
@@ -149,7 +149,7 @@ ASRC =
 # Optimization level, can be [0, 1, 2, 3, s].

 #     0 = turn off optimization. s = optimize for size.

 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)

-OPT = s

+OPT = 1

 

 

 # Debugging format.

@@ -222,7 +222,7 @@ CFLAGS += -Wstrict-prototypes
 #CFLAGS += -Wundef

 #CFLAGS += -Wunreachable-code

 #CFLAGS += -Wsign-compare

-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

+#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

 CFLAGS += $(CSTANDARD)

 

@@ -249,7 +249,7 @@ CPPFLAGS += -Wundef
 #CPPFLAGS += -Wstrict-prototypes

 #CPPFLAGS += -Wunreachable-code

 #CPPFLAGS += -Wsign-compare

-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

+#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

 #CPPFLAGS += $(CSTANDARD)

 

@@ -263,7 +263,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 #             files -- see avr-libc docs [FIXME: not yet described there]

 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex

 #       dump that will be displayed for a given single line of source input.

-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

+ASFLAGS = $(ADEFS)

+#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

 

 

 #---------------- Library Options ----------------

diff --git a/BuildTests/BoardDriverTest/makefile.uc3 b/BuildTests/BoardDriverTest/makefile.uc3
index 7e75b5479..8f307b1ee 100644
--- a/BuildTests/BoardDriverTest/makefile.uc3
+++ b/BuildTests/BoardDriverTest/makefile.uc3
@@ -123,7 +123,7 @@ ASRC =
 # Optimization level, can be [0, 1, 2, 3, s]. 

 #     0 = turn off optimization. s = optimize for size.

 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)

-OPT = s

+OPT = 1

 

 

 # List any extra directories to look for include files here.

@@ -185,7 +185,7 @@ CFLAGS += -fno-strict-aliasing
 CFLAGS += -Wall

 CFLAGS += -Wstrict-prototypes

 CFLAGS += -masm-addr-pseudos

-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

+#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

 CFLAGS += $(CSTANDARD)

 

@@ -208,7 +208,7 @@ CPPFLAGS += -fno-exceptions
 CPPFLAGS += -masm-addr-pseudos

 CPPFLAGS += -Wall

 CPPFLAGS += -Wundef

-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

+#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

 #CPPFLAGS += $(CSTANDARD)

 

@@ -222,7 +222,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 #             files -- see avr-libc docs [FIXME: not yet described there]

 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex 

 #       dump that will be displayed for a given single line of source input.

-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

+ASFLAGS = $(ADEFS)

+#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

 

 

 #---------------- Linker Options ----------------

diff --git a/BuildTests/BoardDriverTest/makefile.xmega b/BuildTests/BoardDriverTest/makefile.xmega
index 5a048b8e3..3c46efafd 100644
--- a/BuildTests/BoardDriverTest/makefile.xmega
+++ b/BuildTests/BoardDriverTest/makefile.xmega
@@ -140,7 +140,7 @@ ASRC =
 # Optimization level, can be [0, 1, 2, 3, s]. 

 #     0 = turn off optimization. s = optimize for size.

 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)

-OPT = s

+OPT = 1

 

 

 # List any extra directories to look for include files here.

@@ -207,7 +207,7 @@ CFLAGS += -fshort-enums
 CFLAGS += -fno-strict-aliasing

 CFLAGS += -Wall

 CFLAGS += -Wstrict-prototypes

-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

+#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

 CFLAGS += $(CSTANDARD)

 

@@ -231,7 +231,7 @@ CPPFLAGS += -fno-strict-aliasing
 CPPFLAGS += -fno-exceptions

 CPPFLAGS += -Wall

 CPPFLAGS += -Wundef

-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

+#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

 #CPPFLAGS += $(CSTANDARD)

 

@@ -245,7 +245,8 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 #             files -- see avr-libc docs [FIXME: not yet described there]

 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex 

 #       dump that will be displayed for a given single line of source input.

-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

+ASFLAGS = $(ADEFS)

+#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

 

 

 #---------------- Library Options ----------------