diff options
| author | Dean Camera <dean@fourwalledcubicle.com> | 2012-04-14 14:41:17 +0000 |
|---|---|---|
| committer | Dean Camera <dean@fourwalledcubicle.com> | 2012-04-14 14:41:17 +0000 |
| commit | 47f6a35013b2c6a370e5dce29aa6da3a96844695 (patch) | |
| tree | 3f5842347a696c92beb74bc255c9489e6c38f49d | |
| parent | e8570c4a37e41117e3fd1e989e0b41f1e9608f3c (diff) | |
| download | lufa-47f6a35013b2c6a370e5dce29aa6da3a96844695.tar.gz lufa-47f6a35013b2c6a370e5dce29aa6da3a96844695.tar.bz2 lufa-47f6a35013b2c6a370e5dce29aa6da3a96844695.zip | |
Reintegrate the FullEPAddresses development branch into trunk.
265 files changed, 2128 insertions, 2494 deletions
diff --git a/Bootloaders/CDC/BootloaderCDC.c b/Bootloaders/CDC/BootloaderCDC.c index e9ea8ae35..a7fc883cf 100644 --- a/Bootloaders/CDC/BootloaderCDC.c +++ b/Bootloaders/CDC/BootloaderCDC.c @@ -122,17 +122,12 @@ ISR(TIMER1_OVF_vect, ISR_BLOCK) void EVENT_USB_Device_ConfigurationChanged(void) { /* Setup CDC Notification, Rx and Tx Endpoints */ - Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, - ENDPOINT_DIR_IN, CDC_NOTIFICATION_EPSIZE, - ENDPOINT_BANK_SINGLE); + Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, + CDC_NOTIFICATION_EPSIZE, 1); - Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK, - ENDPOINT_DIR_IN, CDC_TXRX_EPSIZE, - ENDPOINT_BANK_SINGLE); + Endpoint_ConfigureEndpoint(CDC_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); - Endpoint_ConfigureEndpoint(CDC_RX_EPNUM, EP_TYPE_BULK, - ENDPOINT_DIR_OUT, CDC_TXRX_EPSIZE, - ENDPOINT_BANK_SINGLE); + Endpoint_ConfigureEndpoint(CDC_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); } /** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to @@ -303,7 +298,7 @@ static void ReadWriteMemoryBlock(const uint8_t Command) static uint8_t FetchNextCommandByte(void) { /* Select the OUT endpoint so that the next data byte can be read */ - Endpoint_SelectEndpoint(CDC_RX_EPNUM); + Endpoint_SelectEndpoint(CDC_RX_EPADDR); /* If OUT endpoint empty, clear it and wait for the next packet from the host */ while (!(Endpoint_IsReadWriteAllowed())) @@ -329,7 +324,7 @@ static uint8_t FetchNextCommandByte(void) static void WriteNextResponseByte(const uint8_t Response) { /* Select the IN endpoint so that the next data byte can be written */ - Endpoint_SelectEndpoint(CDC_TX_EPNUM); + Endpoint_SelectEndpoint(CDC_TX_EPADDR); /* If IN endpoint full, clear it and wait until ready for the next packet to the host */ if (!(Endpoint_IsReadWriteAllowed())) @@ -353,7 +348,7 @@ static void WriteNextResponseByte(const uint8_t Response) static void CDC_Task(void) { /* Select the OUT endpoint */ - Endpoint_SelectEndpoint(CDC_RX_EPNUM); + Endpoint_SelectEndpoint(CDC_RX_EPADDR); /* Check if endpoint has a command in it sent from the host */ if (!(Endpoint_IsOUTReceived())) @@ -549,7 +544,7 @@ static void CDC_Task(void) } /* Select the IN endpoint */ - Endpoint_SelectEndpoint(CDC_TX_EPNUM); + Endpoint_SelectEndpoint(CDC_TX_EPADDR); /* Remember if the endpoint is completely full before clearing it */ bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed()); @@ -577,7 +572,7 @@ static void CDC_Task(void) } /* Select the OUT endpoint */ - Endpoint_SelectEndpoint(CDC_RX_EPNUM); + Endpoint_SelectEndpoint(CDC_RX_EPADDR); /* Acknowledge the command from the host */ Endpoint_ClearOUT(); diff --git a/Bootloaders/CDC/Descriptors.c b/Bootloaders/CDC/Descriptors.c index 4bf3eced5..4b769c223 100644 --- a/Bootloaders/CDC/Descriptors.c +++ b/Bootloaders/CDC/Descriptors.c @@ -131,7 +131,7 @@ const USB_Descriptor_Configuration_t ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -157,7 +157,7 @@ const USB_Descriptor_Configuration_t ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -167,7 +167,7 @@ const USB_Descriptor_Configuration_t ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Bootloaders/CDC/Descriptors.h b/Bootloaders/CDC/Descriptors.h index e5ef64102..0010fc69b 100644 --- a/Bootloaders/CDC/Descriptors.h +++ b/Bootloaders/CDC/Descriptors.h @@ -92,14 +92,14 @@ #error The selected AVR part is not currently supported by this bootloader. #endif - /** Endpoint number for the CDC control interface event notification endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address for the CDC control interface event notification endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number for the CDC data interface TX (data IN) endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address for the CDC data interface TX (data IN) endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number for the CDC data interface RX (data OUT) endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address for the CDC data interface RX (data OUT) endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size of the CDC data interface TX and RX data endpoint banks, in bytes. */ #define CDC_TXRX_EPSIZE 16 diff --git a/Bootloaders/HID/BootloaderHID.c b/Bootloaders/HID/BootloaderHID.c index 928000f8b..d8f0186af 100644 --- a/Bootloaders/HID/BootloaderHID.c +++ b/Bootloaders/HID/BootloaderHID.c @@ -85,9 +85,7 @@ static void SetupHardware(void) void EVENT_USB_Device_ConfigurationChanged(void) { /* Setup HID Report Endpoint */ - Endpoint_ConfigureEndpoint(HID_IN_EPNUM, EP_TYPE_INTERRUPT, - ENDPOINT_DIR_IN, HID_IN_EPSIZE, - ENDPOINT_BANK_SINGLE); + Endpoint_ConfigureEndpoint(HID_IN_EPADDR, EP_TYPE_INTERRUPT, HID_IN_EPSIZE, 1); } /** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to diff --git a/Bootloaders/HID/Descriptors.c b/Bootloaders/HID/Descriptors.c index 5d4271e0c..a53101555 100644 --- a/Bootloaders/HID/Descriptors.c +++ b/Bootloaders/HID/Descriptors.c @@ -137,7 +137,7 @@ const USB_Descriptor_Configuration_t ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | HID_IN_EPNUM), + .EndpointAddress = HID_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_IN_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Bootloaders/HID/Descriptors.h b/Bootloaders/HID/Descriptors.h index 41c4ee402..ad216038a 100644 --- a/Bootloaders/HID/Descriptors.h +++ b/Bootloaders/HID/Descriptors.h @@ -55,8 +55,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the HID data IN endpoint. */ - #define HID_IN_EPNUM 1 + /** Endpoint address of the HID data IN endpoint. */ + #define HID_IN_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the HID reporting IN endpoint. */ #define HID_IN_EPSIZE 64 diff --git a/BuildTests/ModuleTest/makefile b/BuildTests/ModuleTest/makefile index 974a3ddbb..c0d3ec040 100644 --- a/BuildTests/ModuleTest/makefile +++ b/BuildTests/ModuleTest/makefile @@ -15,7 +15,7 @@ # List of device families per architecture, one device per architecture sub-family
AVR8_FAMILIES = at90usb1287 at90usb1286 atmega16u4 atmega16u2 at90usb162
-XMEGA_FAMILIES = atxmega128a1u atxmega128a3u atxmega256a3bu atxmega128a4u atxmega128b1 atxmega128b3
+XMEGA_FAMILIES = atxmega128a1u atxmega128a3u atxmega256a3bu atxmega128a4u atxmega128b1 atxmega128b3 atxmega128c3 atxmega32c4
UC3_FAMILIES = uc3a0256 uc3a1256 uc3a3256 uc3a4256 uc3b0256 uc3b1256
# List of all device families, with a family postfix
@@ -24,6 +24,10 @@ DEVICE_FAMILIES = $(AVR8_FAMILIES:%=%.avr8) $(XMEGA_FAMILIES:%=%.xmega) $(UC3_FA all: begin $(DEVICE_FAMILIES) clean end
+arch_avr8: begin $(AVR8_FAMILIES:%=%.avr8) end
+arch_xmega: begin $(XMEGA_FAMILIES:%=%.xmega) end
+arch_uc3: begin $(UC3_FAMILIES:%=%.uc3) end
+
begin:
@echo Executing build test "ModuleTest".
@echo
diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.c b/Demos/Device/ClassDriver/AudioInput/AudioInput.c index 382446a80..867a09eef 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.c +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.c @@ -46,9 +46,12 @@ USB_ClassInfo_Audio_Device_t Microphone_Audio_Interface = { .ControlInterfaceNumber = 0, .StreamingInterfaceNumber = 1, - - .DataINEndpointNumber = AUDIO_STREAM_EPNUM, - .DataINEndpointSize = AUDIO_STREAM_EPSIZE, + .DataINEndpoint = + { + .Address = AUDIO_STREAM_EPADDR, + .Size = AUDIO_STREAM_EPSIZE, + .Banks = 2, + }, }, }; @@ -197,7 +200,7 @@ bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* uint8_t* Data) { /* Check the requested endpoint to see if a supported endpoint is being manipulated */ - if (EndpointAddress == (ENDPOINT_DIR_IN | Microphone_Audio_Interface.Config.DataINEndpointNumber)) + if (EndpointAddress == Microphone_Audio_Interface.Config.DataINEndpoint.Address) { /* Check the requested control to see if a supported control is being manipulated */ if (EndpointControl == AUDIO_EPCONTROL_SamplingFreq) diff --git a/Demos/Device/ClassDriver/AudioInput/Descriptors.c b/Demos/Device/ClassDriver/AudioInput/Descriptors.c index 6b7593f52..8557e18e5 100644 --- a/Demos/Device/ClassDriver/AudioInput/Descriptors.c +++ b/Demos/Device/ClassDriver/AudioInput/Descriptors.c @@ -220,7 +220,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM), + .EndpointAddress = AUDIO_STREAM_EPADDR, .Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/AudioInput/Descriptors.h b/Demos/Device/ClassDriver/AudioInput/Descriptors.h index ac0a536de..359a28730 100644 --- a/Demos/Device/ClassDriver/AudioInput/Descriptors.h +++ b/Demos/Device/ClassDriver/AudioInput/Descriptors.h @@ -42,14 +42,11 @@ #include <avr/pgmspace.h> /* Macros: */ - /** Endpoint number of the Audio isochronous streaming data endpoint. */ - #define AUDIO_STREAM_EPNUM 1 + /** Endpoint address of the Audio isochronous streaming data IN endpoint. */ + #define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires - * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller - * USB AVR models will result in unavoidable distorted output. - */ - #define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM) + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */ + #define AUDIO_STREAM_EPSIZE 256 /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c index 78d81f57a..82f664a9b 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c @@ -46,9 +46,12 @@ USB_ClassInfo_Audio_Device_t Speaker_Audio_Interface = { .ControlInterfaceNumber = 0, .StreamingInterfaceNumber = 1, - - .DataOUTEndpointNumber = AUDIO_STREAM_EPNUM, - .DataOUTEndpointSize = AUDIO_STREAM_EPSIZE, + .DataOUTEndpoint = + { + .Address = AUDIO_STREAM_EPADDR, + .Size = AUDIO_STREAM_EPSIZE, + .Banks = 2, + }, }, }; @@ -234,7 +237,7 @@ bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* uint8_t* Data) { /* Check the requested endpoint to see if a supported endpoint is being manipulated */ - if (EndpointAddress == (ENDPOINT_DIR_OUT | Speaker_Audio_Interface.Config.DataOUTEndpointNumber)) + if (EndpointAddress == Speaker_Audio_Interface.Config.DataOUTEndpoint.Address) { /* Check the requested control to see if a supported control is being manipulated */ if (EndpointControl == AUDIO_EPCONTROL_SamplingFreq) diff --git a/Demos/Device/ClassDriver/AudioOutput/Descriptors.c b/Demos/Device/ClassDriver/AudioOutput/Descriptors.c index 06cc5caf5..0df27453e 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Descriptors.c +++ b/Demos/Device/ClassDriver/AudioOutput/Descriptors.c @@ -220,7 +220,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | AUDIO_STREAM_EPNUM), + .EndpointAddress = AUDIO_STREAM_EPADDR, .Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h index ac0a536de..d5c8a2b84 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h +++ b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h @@ -42,14 +42,11 @@ #include <avr/pgmspace.h> /* Macros: */ - /** Endpoint number of the Audio isochronous streaming data endpoint. */ - #define AUDIO_STREAM_EPNUM 1 + /** Endpoint address of the Audio isochronous streaming data OUT endpoint. */ + #define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_OUT | 1) - /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires - * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller - * USB AVR models will result in unavoidable distorted output. - */ - #define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM) + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */ + #define AUDIO_STREAM_EPSIZE 256 /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c index 5df6808c6..7542ab9af 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c @@ -157,7 +157,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC1_NOTIFICATION_EPNUM), + .EndpointAddress = CDC1_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -183,7 +183,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC1_RX_EPNUM), + .EndpointAddress = CDC1_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -193,7 +193,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC1_TX_EPNUM), + .EndpointAddress = CDC1_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -258,7 +258,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC2_NOTIFICATION_EPNUM), + .EndpointAddress = CDC2_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -284,7 +284,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC2_RX_EPNUM), + .EndpointAddress = CDC2_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -294,7 +294,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC2_TX_EPNUM), + .EndpointAddress = CDC2_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h index 01d10f29b..dc3aa0b86 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h @@ -42,23 +42,23 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - /** Endpoint number of the first CDC interface's device-to-host data IN endpoint. */ - #define CDC1_TX_EPNUM 1 + /** Endpoint address of the first CDC interface's device-to-host data IN endpoint. */ + #define CDC1_TX_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the first CDC interface's host-to-device data OUT endpoint. */ - #define CDC1_RX_EPNUM 2 + /** Endpoint address of the first CDC interface's host-to-device data OUT endpoint. */ + #define CDC1_RX_EPADDR (ENDPOINT_DIR_OUT | 2) - /** Endpoint number of the first CDC interface's device-to-host notification IN endpoint. */ - #define CDC1_NOTIFICATION_EPNUM 3 + /** Endpoint address of the first CDC interface's device-to-host notification IN endpoint. */ + #define CDC1_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the second CDC interface's device-to-host data IN endpoint. */ - #define CDC2_TX_EPNUM 4 + /** Endpoint address of the second CDC interface's device-to-host data IN endpoint. */ + #define CDC2_TX_EPADDR (ENDPOINT_DIR_IN | 4) - /** Endpoint number of the second CDC interface's host-to-device data OUT endpoint. */ - #define CDC2_RX_EPNUM 5 + /** Endpoint address of the second CDC interface's host-to-device data OUT endpoint. */ + #define CDC2_RX_EPADDR (ENDPOINT_DIR_OUT | 5) - /** Endpoint number of the second CDC interface's device-to-host notification IN endpoint. */ - #define CDC2_NOTIFICATION_EPNUM 6 + /** Endpoint address of the second CDC interface's device-to-host notification IN endpoint. */ + #define CDC2_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 6) /** Size in bytes of the CDC device-to-host notification IN endpoints. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c index 8f1eb96cf..a07967c05 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c +++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c @@ -45,19 +45,25 @@ USB_ClassInfo_CDC_Device_t VirtualSerial1_CDC_Interface = { .Config = { - .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC1_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC1_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC1_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .ControlInterfaceNumber = 0, + .DataINEndpoint = + { + .Address = CDC1_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC1_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC1_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; @@ -70,19 +76,26 @@ USB_ClassInfo_CDC_Device_t VirtualSerial2_CDC_Interface = { .Config = { - .ControlInterfaceNumber = 2, - - .DataINEndpointNumber = CDC2_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC2_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, + .ControlInterfaceNumber = 2, + .DataINEndpoint = + { + .Address = CDC2_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC2_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC2_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, - .NotificationEndpointNumber = CDC2_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, }, }; diff --git a/Demos/Device/ClassDriver/GenericHID/Descriptors.c b/Demos/Device/ClassDriver/GenericHID/Descriptors.c index ee1ba49c8..f8bb128f9 100644 --- a/Demos/Device/ClassDriver/GenericHID/Descriptors.c +++ b/Demos/Device/ClassDriver/GenericHID/Descriptors.c @@ -135,7 +135,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | GENERIC_IN_EPNUM), + .EndpointAddress = GENERIC_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = GENERIC_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/GenericHID/Descriptors.h b/Demos/Device/ClassDriver/GenericHID/Descriptors.h index ddeef240c..0b9ec8f71 100644 --- a/Demos/Device/ClassDriver/GenericHID/Descriptors.h +++ b/Demos/Device/ClassDriver/GenericHID/Descriptors.h @@ -57,8 +57,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Generic HID reporting IN endpoint. */ - #define GENERIC_IN_EPNUM 1 + /** Endpoint address of the Generic HID reporting IN endpoint. */ + #define GENERIC_IN_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Generic HID reporting endpoint. */ #define GENERIC_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.c b/Demos/Device/ClassDriver/GenericHID/GenericHID.c index 36eb8f7fe..aa365bde2 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.c +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t Generic_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = GENERIC_IN_EPNUM, - .ReportINEndpointSize = GENERIC_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = GENERIC_IN_EPADDR, + .Size = GENERIC_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/Joystick/Descriptors.c b/Demos/Device/ClassDriver/Joystick/Descriptors.c index da6fc3d09..d0a469f6b 100644 --- a/Demos/Device/ClassDriver/Joystick/Descriptors.c +++ b/Demos/Device/ClassDriver/Joystick/Descriptors.c @@ -135,7 +135,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | JOYSTICK_EPNUM), + .EndpointAddress = JOYSTICK_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = JOYSTICK_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/Joystick/Descriptors.h b/Demos/Device/ClassDriver/Joystick/Descriptors.h index f0ad9c2f1..d2e294316 100644 --- a/Demos/Device/ClassDriver/Joystick/Descriptors.h +++ b/Demos/Device/ClassDriver/Joystick/Descriptors.h @@ -57,8 +57,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Joystick HID reporting IN endpoint. */ - #define JOYSTICK_EPNUM 1 + /** Endpoint address of the Joystick HID reporting IN endpoint. */ + #define JOYSTICK_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Joystick HID reporting IN endpoint. */ #define JOYSTICK_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.c b/Demos/Device/ClassDriver/Joystick/Joystick.c index 3c1913f8f..4f361daf0 100644 --- a/Demos/Device/ClassDriver/Joystick/Joystick.c +++ b/Demos/Device/ClassDriver/Joystick/Joystick.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t Joystick_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = JOYSTICK_EPNUM, - .ReportINEndpointSize = JOYSTICK_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = JOYSTICK_EPADDR, + .Size = JOYSTICK_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevJoystickHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevJoystickHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/Keyboard/Descriptors.c b/Demos/Device/ClassDriver/Keyboard/Descriptors.c index cb7852667..84ec47a98 100644 --- a/Demos/Device/ClassDriver/Keyboard/Descriptors.c +++ b/Demos/Device/ClassDriver/Keyboard/Descriptors.c @@ -131,7 +131,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_EPNUM), + .EndpointAddress = KEYBOARD_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = KEYBOARD_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/Keyboard/Descriptors.h b/Demos/Device/ClassDriver/Keyboard/Descriptors.h index 370489514..f032b728e 100644 --- a/Demos/Device/ClassDriver/Keyboard/Descriptors.h +++ b/Demos/Device/ClassDriver/Keyboard/Descriptors.h @@ -57,8 +57,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Keyboard HID reporting IN endpoint. */ - #define KEYBOARD_EPNUM 1 + /** Endpoint address of the Keyboard HID reporting IN endpoint. */ + #define KEYBOARD_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Keyboard HID reporting IN endpoint. */ #define KEYBOARD_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.c b/Demos/Device/ClassDriver/Keyboard/Keyboard.c index 15a7f1760..24bf8d5fa 100644 --- a/Demos/Device/ClassDriver/Keyboard/Keyboard.c +++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = KEYBOARD_EPNUM, - .ReportINEndpointSize = KEYBOARD_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = KEYBOARD_EPADDR, + .Size = KEYBOARD_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevKeyboardHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevKeyboardHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c index d6471d6e7..207e7829b 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c +++ b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c @@ -147,7 +147,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_IN_EPNUM), + .EndpointAddress = KEYBOARD_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_EPSIZE, .PollingIntervalMS = 0x01 @@ -184,7 +184,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_IN_EPNUM), + .EndpointAddress = MOUSE_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h index fe41f923e..e35e266c0 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h +++ b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h @@ -62,11 +62,11 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Keyboard HID reporting IN endpoint. */ - #define KEYBOARD_IN_EPNUM 1 + /** Endpoint address of the Keyboard HID reporting IN endpoint. */ + #define KEYBOARD_IN_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the Mouse HID reporting IN endpoint. */ - #define MOUSE_IN_EPNUM 3 + /** Endpoint address of the Mouse HID reporting IN endpoint. */ + #define MOUSE_IN_EPADDR (ENDPOINT_DIR_IN | 3) /** Size in bytes of each of the HID reporting IN endpoints. */ #define HID_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c index cb2eebf81..7b5caa405 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c +++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c @@ -52,11 +52,12 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = KEYBOARD_IN_EPNUM, - .ReportINEndpointSize = HID_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = KEYBOARD_IN_EPADDR, + .Size = HID_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevKeyboardHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevKeyboardHIDReportBuffer), }, @@ -72,10 +73,12 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface = .Config = { .InterfaceNumber = 1, - - .ReportINEndpointNumber = MOUSE_IN_EPNUM, - .ReportINEndpointSize = HID_EPSIZE, - + .ReportINEndpoint = + { + .Address = MOUSE_IN_EPADDR, + .Size = HID_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevMouseHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c index f08cdc717..fc2eafccd 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c @@ -194,7 +194,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | HID_IN_EPNUM), + .EndpointAddress = HID_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h index f579edfb8..5632aa849 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h @@ -57,8 +57,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the HID reporting IN endpoint. */ - #define HID_IN_EPNUM 1 + /** Endpoint address of the HID reporting IN endpoint. */ + #define HID_IN_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of each of the HID reporting IN endpoint. */ #define HID_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c index 7197959bb..c0526abfd 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t Device_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = HID_IN_EPNUM, - .ReportINEndpointSize = HID_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = HID_IN_EPADDR, + .Size = HID_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/MIDI/Descriptors.c b/Demos/Device/ClassDriver/MIDI/Descriptors.c index 9ad0e86a5..84898acf6 100644 --- a/Demos/Device/ClassDriver/MIDI/Descriptors.c +++ b/Demos/Device/ClassDriver/MIDI/Descriptors.c @@ -199,7 +199,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MIDI_STREAM_OUT_EPNUM), + .EndpointAddress = MIDI_STREAM_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MIDI_STREAM_EPSIZE, .PollingIntervalMS = 0x01 @@ -224,7 +224,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MIDI_STREAM_IN_EPNUM), + .EndpointAddress = MIDI_STREAM_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MIDI_STREAM_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/MIDI/Descriptors.h b/Demos/Device/ClassDriver/MIDI/Descriptors.h index c5dc2e217..83844449d 100644 --- a/Demos/Device/ClassDriver/MIDI/Descriptors.h +++ b/Demos/Device/ClassDriver/MIDI/Descriptors.h @@ -42,11 +42,11 @@ #include <avr/pgmspace.h> /* Macros: */ - /** Endpoint number of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ - #define MIDI_STREAM_IN_EPNUM 2 + /** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ + #define MIDI_STREAM_IN_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */ - #define MIDI_STREAM_OUT_EPNUM 1 + /** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */ + #define MIDI_STREAM_OUT_EPADDR (ENDPOINT_DIR_OUT | 1) /** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */ #define MIDI_STREAM_EPSIZE 64 diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.c b/Demos/Device/ClassDriver/MIDI/MIDI.c index 317c37db0..a55c6a70e 100644 --- a/Demos/Device/ClassDriver/MIDI/MIDI.c +++ b/Demos/Device/ClassDriver/MIDI/MIDI.c @@ -45,14 +45,18 @@ USB_ClassInfo_MIDI_Device_t Keyboard_MIDI_Interface = .Config = { .StreamingInterfaceNumber = 1, - - .DataINEndpointNumber = MIDI_STREAM_IN_EPNUM, - .DataINEndpointSize = MIDI_STREAM_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MIDI_STREAM_OUT_EPNUM, - .DataOUTEndpointSize = MIDI_STREAM_EPSIZE, - .DataOUTEndpointDoubleBank = false, + .DataINEndpoint = + { + .Address = MIDI_STREAM_IN_EPADDR, + .Size = MIDI_STREAM_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MIDI_STREAM_OUT_EPADDR, + .Size = MIDI_STREAM_EPSIZE, + .Banks = 1, + }, }, }; diff --git a/Demos/Device/ClassDriver/MassStorage/Descriptors.c b/Demos/Device/ClassDriver/MassStorage/Descriptors.c index fb829423a..0ab09b6a5 100644 --- a/Demos/Device/ClassDriver/MassStorage/Descriptors.c +++ b/Demos/Device/ClassDriver/MassStorage/Descriptors.c @@ -118,7 +118,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 @@ -128,7 +128,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/MassStorage/Descriptors.h b/Demos/Device/ClassDriver/MassStorage/Descriptors.h index 813f99520..84879e822 100644 --- a/Demos/Device/ClassDriver/MassStorage/Descriptors.h +++ b/Demos/Device/ClassDriver/MassStorage/Descriptors.h @@ -42,11 +42,11 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.c b/Demos/Device/ClassDriver/MassStorage/MassStorage.c index 6a720f983..0ba06a5d0 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.c +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.c @@ -45,15 +45,18 @@ USB_ClassInfo_MS_Device_t Disk_MS_Interface = .Config = { .InterfaceNumber = 0, - - .DataINEndpointNumber = MASS_STORAGE_IN_EPNUM, - .DataINEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MASS_STORAGE_OUT_EPNUM, - .DataOUTEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataOUTEndpointDoubleBank = false, - + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, .TotalLUNs = TOTAL_LUNS, }, }; diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c index 27909034c..e7c9486b8 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c @@ -133,7 +133,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 @@ -143,7 +143,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 @@ -180,7 +180,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_EPNUM), + .EndpointAddress = KEYBOARD_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = KEYBOARD_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h index 86f6cc4c4..fb1a3794f 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h @@ -43,17 +43,17 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - /** Endpoint number of the Keyboard HID reporting IN endpoint. */ - #define KEYBOARD_EPNUM 1 + /** Endpoint address of the Keyboard HID reporting IN endpoint. */ + #define KEYBOARD_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Keyboard HID reporting IN endpoint. */ #define KEYBOARD_EPSIZE 8 - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c index bfdf09ceb..7e12a5d6e 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c @@ -46,15 +46,18 @@ USB_ClassInfo_MS_Device_t Disk_MS_Interface = .Config = { .InterfaceNumber = 0, - - .DataINEndpointNumber = MASS_STORAGE_IN_EPNUM, - .DataINEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MASS_STORAGE_OUT_EPNUM, - .DataOUTEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataOUTEndpointDoubleBank = false, - + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, .TotalLUNs = TOTAL_LUNS, }, }; @@ -71,11 +74,12 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface = .Config = { .InterfaceNumber = 1, - - .ReportINEndpointNumber = KEYBOARD_EPNUM, - .ReportINEndpointSize = KEYBOARD_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = KEYBOARD_EPADDR, + .Size = KEYBOARD_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevKeyboardHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevKeyboardHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/Mouse/Descriptors.c b/Demos/Device/ClassDriver/Mouse/Descriptors.c index 1a7af876c..93bd02d61 100644 --- a/Demos/Device/ClassDriver/Mouse/Descriptors.c +++ b/Demos/Device/ClassDriver/Mouse/Descriptors.c @@ -136,7 +136,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_EPNUM), + .EndpointAddress = MOUSE_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MOUSE_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/Mouse/Descriptors.h b/Demos/Device/ClassDriver/Mouse/Descriptors.h index da78dd0ff..abcd938a8 100644 --- a/Demos/Device/ClassDriver/Mouse/Descriptors.h +++ b/Demos/Device/ClassDriver/Mouse/Descriptors.h @@ -41,6 +41,13 @@ #include <avr/pgmspace.h> + /* Macros: */ + /** Endpoint address of the Mouse HID reporting IN endpoint. */ + #define MOUSE_EPADDR (ENDPOINT_DIR_IN | 1) + + /** Size in bytes of the Mouse HID reporting IN endpoint. */ + #define MOUSE_EPSIZE 8 + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which @@ -56,13 +63,6 @@ USB_Descriptor_Endpoint_t HID_ReportINEndpoint; } USB_Descriptor_Configuration_t; - /* Macros: */ - /** Endpoint number of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPNUM 1 - - /** Size in bytes of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPSIZE 8 - /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.c b/Demos/Device/ClassDriver/Mouse/Mouse.c index 04d4268f0..00cadb41c 100644 --- a/Demos/Device/ClassDriver/Mouse/Mouse.c +++ b/Demos/Device/ClassDriver/Mouse/Mouse.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = MOUSE_EPNUM, - .ReportINEndpointSize = MOUSE_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = MOUSE_EPADDR, + .Size = MOUSE_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevMouseHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c index 41bc4b59e..86cc420c7 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c @@ -131,7 +131,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -157,7 +157,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -167,7 +167,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h index 7c40d87a1..6301b83aa 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h @@ -42,14 +42,14 @@ #include <avr/pgmspace.h> /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 3 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 1 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 2 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 2) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c index 2a8ba9735..37fb817de 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c @@ -45,19 +45,24 @@ USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface = .Config = { .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, - + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, .AdapterVendorDescription = "LUFA RNDIS Demo Adapter", .AdapterMACAddress = {ADAPTER_MAC_ADDRESS}, }, diff --git a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c index f4e9fb324..0858bc47c 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c +++ b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c @@ -143,7 +143,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -169,7 +169,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -179,7 +179,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h index fb69344cb..af9183ed2 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h +++ b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h @@ -42,14 +42,14 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c index c3e16edb0..8b11c298c 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c +++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c @@ -44,19 +44,25 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = { .Config = { - .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .ControlInterfaceNumber = 0, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c index 299ddbdca..a3738651e 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c @@ -157,7 +157,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -183,7 +183,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -193,7 +193,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -219,7 +219,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 @@ -229,7 +229,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h index b4b5ef67a..544a2b5c0 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h @@ -42,14 +42,14 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 1 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 2 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 3 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 3) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 @@ -57,11 +57,11 @@ /** Size in bytes of the CDC data IN and OUT endpoints. */ #define CDC_TXRX_EPSIZE 16 - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 4 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 4) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 5 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 5) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c index d8ffea873..14d6abdd9 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c @@ -45,18 +45,24 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = .Config = { .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; @@ -69,15 +75,18 @@ USB_ClassInfo_MS_Device_t Disk_MS_Interface = .Config = { .InterfaceNumber = 2, - - .DataINEndpointNumber = MASS_STORAGE_IN_EPNUM, - .DataINEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MASS_STORAGE_OUT_EPNUM, - .DataOUTEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataOUTEndpointDoubleBank = false, - + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, .TotalLUNs = TOTAL_LUNS, }, }; diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c index af674563f..0a40b4fa8 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c @@ -176,7 +176,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -202,7 +202,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -212,7 +212,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -249,7 +249,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_EPNUM), + .EndpointAddress = MOUSE_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MOUSE_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h index 2509314b2..06cfd459b 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h @@ -42,14 +42,14 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 @@ -57,8 +57,8 @@ /** Size in bytes of the CDC data IN and OUT endpoints. */ #define CDC_TXRX_EPSIZE 16 - /** Endpoint number of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPNUM 1 + /** Endpoint address of the Mouse HID reporting IN endpoint. */ + #define MOUSE_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c index f2d67542d..dbbc8e7b4 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c @@ -45,18 +45,24 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = .Config = { .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; @@ -72,11 +78,12 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface = .Config = { .InterfaceNumber = 2, - - .ReportINEndpointNumber = MOUSE_EPNUM, - .ReportINEndpointSize = MOUSE_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = MOUSE_EPADDR, + .Size = MOUSE_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevMouseHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), }, diff --git a/Demos/Device/Incomplete/Sideshow/Descriptors.c b/Demos/Device/Incomplete/Sideshow/Descriptors.c index 533c92121..cc1a094c8 100644 --- a/Demos/Device/Incomplete/Sideshow/Descriptors.c +++ b/Demos/Device/Incomplete/Sideshow/Descriptors.c @@ -89,7 +89,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint}, - EndpointAddress: (ENDPOINT_DIR_IN | SIDESHOW_IN_EPNUM), + EndpointAddress: SIDESHOW_IN_EPADDR, Attributes: EP_TYPE_BULK, EndpointSize: SIDESHOW_IO_EPSIZE, PollingIntervalMS: 0x00 @@ -99,7 +99,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint}, - EndpointAddress: (ENDPOINT_DIR_OUT | SIDESHOW_OUT_EPNUM), + EndpointAddress: SIDESHOW_OUT_EPADDR, Attributes: EP_TYPE_BULK, EndpointSize: SIDESHOW_IO_EPSIZE, PollingIntervalMS: 0x00 diff --git a/Demos/Device/Incomplete/Sideshow/Descriptors.h b/Demos/Device/Incomplete/Sideshow/Descriptors.h index 6c9c6e3d7..1725a7951 100644 --- a/Demos/Device/Incomplete/Sideshow/Descriptors.h +++ b/Demos/Device/Incomplete/Sideshow/Descriptors.h @@ -39,8 +39,8 @@ #include "Sideshow.h" /* Macros: */ - #define SIDESHOW_IN_EPNUM 3 - #define SIDESHOW_OUT_EPNUM 4 + #define SIDESHOW_IN_EPADDR 3 + #define SIDESHOW_OUT_EPADDR 4 #define SIDESHOW_IO_EPSIZE 64 /* Type Defines: */ diff --git a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.c b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.c index 4634036e7..3e2392467 100644 --- a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.c +++ b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.c @@ -47,7 +47,7 @@ void Sideshow_ProcessCommandPacket(void) { SideShow_PacketHeader_t PacketHeader; - Endpoint_SelectEndpoint(SIDESHOW_OUT_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_OUT_EPADDR); Endpoint_Read_Stream_LE(&PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); PacketHeader.Type.TypeFields.Response = true; @@ -110,7 +110,7 @@ void Sideshow_ProcessCommandPacket(void) PacketHeader.Length = sizeof(SideShow_PacketHeader_t); PacketHeader.Type.TypeFields.NAK = true; - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(&PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); @@ -122,7 +122,7 @@ static void SideShow_Ping(SideShow_PacketHeader_t* const PacketHeader) { Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -137,7 +137,7 @@ static void SideShow_Sync(SideShow_PacketHeader_t* const PacketHeader) if (!(GUID_COMPARE(&ProtocolGUID, (uint32_t[])STANDARD_PROTOCOL_GUID))) PacketHeader->Type.TypeFields.NAK = true; - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_Write_Stream_LE(&ProtocolGUID, sizeof(GUID_t), NULL); Endpoint_ClearIN(); @@ -149,7 +149,7 @@ static void SideShow_GetCurrentUser(SideShow_PacketHeader_t* const PacketHeader) PacketHeader->Length = sizeof(SideShow_PacketHeader_t) + sizeof(uint32_t) + UserSID.LengthInBytes; - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); SideShow_Write_Unicode_String(&UserSID); Endpoint_ClearIN(); @@ -162,7 +162,7 @@ static void SideShow_SetCurrentUser(SideShow_PacketHeader_t* const PacketHeader) PacketHeader->Length = sizeof(SideShow_PacketHeader_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -254,7 +254,7 @@ static void SideShow_GetCapabilities(SideShow_PacketHeader_t* const PacketHeader Property.PropertyGUID.Chunks[2], Property.PropertyGUID.Chunks[3]); } - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); if (!(PacketHeader->Type.TypeFields.NAK)) @@ -288,7 +288,7 @@ static void SideShow_GetString(SideShow_PacketHeader_t* const PacketHeader, PacketHeader->Length = sizeof(SideShow_PacketHeader_t) + sizeof(uint32_t) + ((Unicode_String_t*)UnicodeStruct)->LengthInBytes; - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); SideShow_Write_Unicode_String(UnicodeStruct); Endpoint_ClearIN(); @@ -309,7 +309,7 @@ static void SideShow_GetApplicationOrder(SideShow_PacketHeader_t* const PacketHe PacketHeader->Length = sizeof(SideShow_PacketHeader_t) + sizeof(uint32_t) + (TotalApplications * sizeof(GUID_t)); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_Write_32_LE(TotalApplications); @@ -330,7 +330,7 @@ static void SideShow_GetSupportedEndpoints(SideShow_PacketHeader_t* const Packet PacketHeader->Length = sizeof(SideShow_PacketHeader_t) + sizeof(uint32_t) + sizeof(GUID_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_Write_32_LE(1); Endpoint_Write_Stream_LE(&SupportedEndpointGUID, sizeof(GUID_t), NULL); @@ -377,7 +377,7 @@ static void SideShow_AddApplication(SideShow_PacketHeader_t* const PacketHeader) PacketHeader->Length = sizeof(SideShow_PacketHeader_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -398,7 +398,7 @@ static void SideShow_DeleteApplication(SideShow_PacketHeader_t* const PacketHead PacketHeader->Length = sizeof(SideShow_PacketHeader_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -410,7 +410,7 @@ static void SideShow_DeleteAllApplications(SideShow_PacketHeader_t* const Packet for (uint8_t App = 0; App < MAX_APPLICATIONS; App++) InstalledApplications[App].InUse = false; - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -440,7 +440,7 @@ static void SideShow_AddContent(SideShow_PacketHeader_t* const PacketHeader) PacketHeader->Length = sizeof(SideShow_PacketHeader_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -465,7 +465,7 @@ static void SideShow_DeleteContent(SideShow_PacketHeader_t* const PacketHeader) PacketHeader->Length = sizeof(SideShow_PacketHeader_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -488,7 +488,7 @@ static void SideShow_DeleteAllContent(SideShow_PacketHeader_t* const PacketHeade PacketHeader->Length = sizeof(SideShow_PacketHeader_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } diff --git a/Demos/Device/Incomplete/Sideshow/Sideshow.c b/Demos/Device/Incomplete/Sideshow/Sideshow.c index 3bc58d376..41009f373 100644 --- a/Demos/Device/Incomplete/Sideshow/Sideshow.c +++ b/Demos/Device/Incomplete/Sideshow/Sideshow.c @@ -101,10 +101,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup Sideshow Data Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(SIDESHOW_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - SIDESHOW_IO_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(SIDESHOW_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - SIDESHOW_IO_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(SIDESHOW_IN_EPADDR, EP_TYPE_BULK, SIDESHOW_IO_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(SIDESHOW_OUT_EPADDR, EP_TYPE_BULK, SIDESHOW_IO_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -142,7 +140,7 @@ void SideShow_Task(void) return; /* Select the SideShow data out endpoint */ - Endpoint_SelectEndpoint(SIDESHOW_OUT_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_OUT_EPADDR); /* Check to see if a new SideShow message has been received */ if (Endpoint_IsReadWriteAllowed()) diff --git a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c index 14be2ec49..2a60a741c 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c +++ b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c @@ -119,7 +119,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | TMC_OUT_EPNUM), + .EndpointAddress = TMC_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = TMC_IO_EPSIZE, .PollingIntervalMS = 0x01 @@ -129,7 +129,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | TMC_IN_EPNUM), + .EndpointAddress = TMC_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = TMC_IO_EPSIZE, .PollingIntervalMS = 0x01 @@ -139,7 +139,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | TMC_NOTIFICATION_EPNUM), + .EndpointAddress = TMC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = TMC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF diff --git a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h index 8876f732b..e45654a27 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h +++ b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h @@ -43,20 +43,20 @@ #include <LUFA/Drivers/USB/USB.h>
/* Macros: */
- /** Endpoint number of the TMC notification IN endpoint. */
- #define TMC_NOTIFICATION_EPNUM 2
+ /** Endpoint address of the TMC notification IN endpoint. */
+ #define TMC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2)
- /** Endpoint number of the TMC device-to-host data IN endpoint. */
- #define TMC_IN_EPNUM 3
+ /** Endpoint address of the TMC device-to-host data IN endpoint. */
+ #define TMC_IN_EPADDR (ENDPOINT_DIR_IN | 3)
- /** Endpoint number of the TMC host-to-device data OUT endpoint. */
- #define TMC_OUT_EPNUM 4
+ /** Endpoint address of the TMC host-to-device data OUT endpoint. */
+ #define TMC_OUT_EPADDR (ENDPOINT_DIR_OUT | 4)
/** Size in bytes of the TMC data endpoints. */
- #define TMC_IO_EPSIZE 64
+ #define TMC_IO_EPSIZE 64
/** Size in bytes of the TMC notification endpoint. */
- #define TMC_NOTIFICATION_EPSIZE 8
+ #define TMC_NOTIFICATION_EPSIZE 8
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c index c77b01e1a..5102f101c 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c +++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c @@ -129,12 +129,9 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup TMC In, Out and Notification Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - TMC_IO_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - TMC_IO_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - TMC_IO_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, TMC_IO_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_IN_EPADDR, EP_TYPE_BULK, TMC_IO_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_OUT_EPADDR, EP_TYPE_BULK, TMC_IO_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -418,7 +415,7 @@ bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader) uint8_t ErrorCode; /* Select the Data Out endpoint */ - Endpoint_SelectEndpoint(TMC_OUT_EPNUM); + Endpoint_SelectEndpoint(TMC_OUT_EPADDR); /* Abort if no command has been sent from the host */ if (!(Endpoint_IsOUTReceived())) @@ -450,7 +447,7 @@ bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader) MessageHeader->InverseTag = ~CurrentTransferTag; /* Select the Data In endpoint */ - Endpoint_SelectEndpoint(TMC_IN_EPNUM); + Endpoint_SelectEndpoint(TMC_IN_EPADDR); /* Send the command header to the host */ BytesTransferred = 0; diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.c b/Demos/Device/LowLevel/AudioInput/AudioInput.c index 60eeaf64c..eb9c4b57c 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.c +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.c @@ -118,8 +118,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup Audio Stream Endpoint */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPNUM, EP_TYPE_ISOCHRONOUS, ENDPOINT_DIR_IN, - AUDIO_STREAM_EPSIZE, ENDPOINT_BANK_DOUBLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPADDR, EP_TYPE_ISOCHRONOUS, AUDIO_STREAM_EPSIZE, 2); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -165,7 +164,7 @@ void EVENT_USB_Device_ControlRequest(void) uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8); /* Only handle SET CURRENT requests to the audio endpoint's sample frequency property */ - if ((EndpointAddress == (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) + if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) { uint8_t SampleRate[3]; @@ -190,7 +189,7 @@ void EVENT_USB_Device_ControlRequest(void) uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8); /* Only handle GET CURRENT requests to the audio endpoint's sample frequency property */ - if ((EndpointAddress == (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) + if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) { uint8_t SampleRate[3]; @@ -215,7 +214,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK) uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint(); /* Select the audio stream endpoint */ - Endpoint_SelectEndpoint(AUDIO_STREAM_EPNUM); + Endpoint_SelectEndpoint(AUDIO_STREAM_EPADDR); /* Check if the current endpoint can be written to and that the audio interface is enabled */ if (Endpoint_IsINReady() && StreamingAudioInterfaceSelected) diff --git a/Demos/Device/LowLevel/AudioInput/Descriptors.c b/Demos/Device/LowLevel/AudioInput/Descriptors.c index 0b1652246..ee37affd2 100644 --- a/Demos/Device/LowLevel/AudioInput/Descriptors.c +++ b/Demos/Device/LowLevel/AudioInput/Descriptors.c @@ -220,7 +220,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM), + .EndpointAddress = AUDIO_STREAM_EPADDR, .Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/AudioInput/Descriptors.h b/Demos/Device/LowLevel/AudioInput/Descriptors.h index ac0a536de..4680294c9 100644 --- a/Demos/Device/LowLevel/AudioInput/Descriptors.h +++ b/Demos/Device/LowLevel/AudioInput/Descriptors.h @@ -42,14 +42,11 @@ #include <avr/pgmspace.h> /* Macros: */ - /** Endpoint number of the Audio isochronous streaming data endpoint. */ - #define AUDIO_STREAM_EPNUM 1 + /** Endpoint address of the Audio isochronous streaming data IN endpoint. */ + #define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires - * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller - * USB AVR models will result in unavoidable distorted output. - */ - #define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM) + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */ + #define AUDIO_STREAM_EPSIZE 256 /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c index 813108a71..ebf4ad51d 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c @@ -144,8 +144,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup Audio Stream Endpoint */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPNUM, EP_TYPE_ISOCHRONOUS, ENDPOINT_DIR_OUT, - AUDIO_STREAM_EPSIZE, ENDPOINT_BANK_DOUBLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPADDR, EP_TYPE_ISOCHRONOUS, AUDIO_STREAM_EPSIZE, 2); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -191,7 +190,7 @@ void EVENT_USB_Device_ControlRequest(void) uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8); /* Only handle SET CURRENT requests to the audio endpoint's sample frequency property */ - if ((EndpointAddress == (ENDPOINT_DIR_OUT | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) + if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) { uint8_t SampleRate[3]; @@ -216,7 +215,7 @@ void EVENT_USB_Device_ControlRequest(void) uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8); /* Only handle GET CURRENT requests to the audio endpoint's sample frequency property */ - if ((EndpointAddress == (ENDPOINT_DIR_OUT | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) + if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) { uint8_t SampleRate[3]; @@ -241,7 +240,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK) uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint(); /* Select the audio stream endpoint */ - Endpoint_SelectEndpoint(AUDIO_STREAM_EPNUM); + Endpoint_SelectEndpoint(AUDIO_STREAM_EPADDR); /* Check if the current endpoint can be read from (contains a packet) and the host is sending data */ if (Endpoint_IsOUTReceived() && StreamingAudioInterfaceSelected) diff --git a/Demos/Device/LowLevel/AudioOutput/Descriptors.c b/Demos/Device/LowLevel/AudioOutput/Descriptors.c index 7f12fc72c..12a5a1562 100644 --- a/Demos/Device/LowLevel/AudioOutput/Descriptors.c +++ b/Demos/Device/LowLevel/AudioOutput/Descriptors.c @@ -220,7 +220,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | AUDIO_STREAM_EPNUM), + .EndpointAddress = AUDIO_STREAM_EPADDR, .Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/AudioOutput/Descriptors.h b/Demos/Device/LowLevel/AudioOutput/Descriptors.h index ac0a536de..e0c756744 100644 --- a/Demos/Device/LowLevel/AudioOutput/Descriptors.h +++ b/Demos/Device/LowLevel/AudioOutput/Descriptors.h @@ -42,14 +42,11 @@ #include <avr/pgmspace.h> /* Macros: */ - /** Endpoint number of the Audio isochronous streaming data endpoint. */ - #define AUDIO_STREAM_EPNUM 1 + /** Endpoint address of the Audio isochronous streaming data OUT endpoint. */ + #define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_OUT | 1) - /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires - * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller - * USB AVR models will result in unavoidable distorted output. - */ - #define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM) + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */ + #define AUDIO_STREAM_EPSIZE 256 /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c index 5df6808c6..7542ab9af 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c +++ b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c @@ -157,7 +157,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC1_NOTIFICATION_EPNUM), + .EndpointAddress = CDC1_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -183,7 +183,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC1_RX_EPNUM), + .EndpointAddress = CDC1_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -193,7 +193,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC1_TX_EPNUM), + .EndpointAddress = CDC1_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -258,7 +258,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC2_NOTIFICATION_EPNUM), + .EndpointAddress = CDC2_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -284,7 +284,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC2_RX_EPNUM), + .EndpointAddress = CDC2_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -294,7 +294,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC2_TX_EPNUM), + .EndpointAddress = CDC2_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h index 0a172d83d..fee2c8552 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h +++ b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h @@ -42,23 +42,23 @@ #include <avr/pgmspace.h> /* Macros: */ - /** Endpoint number of the first CDC interface's device-to-host data IN endpoint. */ - #define CDC1_TX_EPNUM 1 + /** Endpoint address of the first CDC interface's device-to-host data IN endpoint. */ + #define CDC1_TX_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the first CDC interface's host-to-device data OUT endpoint. */ - #define CDC1_RX_EPNUM 2 + /** Endpoint address of the first CDC interface's host-to-device data OUT endpoint. */ + #define CDC1_RX_EPADDR (ENDPOINT_DIR_OUT | 2) - /** Endpoint number of the first CDC interface's device-to-host notification IN endpoint. */ - #define CDC1_NOTIFICATION_EPNUM 3 + /** Endpoint address of the first CDC interface's device-to-host notification IN endpoint. */ + #define CDC1_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the second CDC interface's device-to-host data IN endpoint. */ - #define CDC2_TX_EPNUM 4 + /** Endpoint address of the second CDC interface's device-to-host data IN endpoint. */ + #define CDC2_TX_EPADDR (ENDPOINT_DIR_IN | 4) - /** Endpoint number of the second CDC interface's host-to-device data OUT endpoint. */ - #define CDC2_RX_EPNUM 5 + /** Endpoint address of the second CDC interface's host-to-device data OUT endpoint. */ + #define CDC2_RX_EPADDR (ENDPOINT_DIR_OUT | 5) - /** Endpoint number of the second CDC interface's device-to-host notification IN endpoint. */ - #define CDC2_NOTIFICATION_EPNUM 6 + /** Endpoint address of the second CDC interface's device-to-host notification IN endpoint. */ + #define CDC2_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 6) /** Size in bytes of the CDC device-to-host notification IN endpoints. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c index 9208b2c44..2db6f4e23 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c +++ b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c @@ -123,20 +123,14 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup first CDC Interface's Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_TX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_RX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - CDC_NOTIFICATION_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1); /* Setup second CDC Interface's Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_TX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_RX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - CDC_NOTIFICATION_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1); /* Reset line encoding baud rates so that the host knows to send new values */ LineEncoding1.BaudRateBPS = 0; @@ -224,7 +218,7 @@ void CDC1_Task(void) ActionSent = true; /* Select the Serial Tx Endpoint */ - Endpoint_SelectEndpoint(CDC1_TX_EPNUM); + Endpoint_SelectEndpoint(CDC1_TX_EPADDR); /* Write the String to the Endpoint */ Endpoint_Write_Stream_LE(ReportString, strlen(ReportString), NULL); @@ -240,7 +234,7 @@ void CDC1_Task(void) } /* Select the Serial Rx Endpoint */ - Endpoint_SelectEndpoint(CDC1_RX_EPNUM); + Endpoint_SelectEndpoint(CDC1_RX_EPADDR); /* Throw away any received data from the host */ if (Endpoint_IsOUTReceived()) @@ -257,7 +251,7 @@ void CDC2_Task(void) return; /* Select the Serial Rx Endpoint */ - Endpoint_SelectEndpoint(CDC2_RX_EPNUM); + Endpoint_SelectEndpoint(CDC2_RX_EPADDR); /* Check to see if any data has been received */ if (Endpoint_IsOUTReceived()) @@ -275,7 +269,7 @@ void CDC2_Task(void) Endpoint_ClearOUT(); /* Select the Serial Tx Endpoint */ - Endpoint_SelectEndpoint(CDC2_TX_EPNUM); + Endpoint_SelectEndpoint(CDC2_TX_EPADDR); /* Write the received data to the endpoint */ Endpoint_Write_Stream_LE(&Buffer, DataLength, NULL); diff --git a/Demos/Device/LowLevel/GenericHID/Descriptors.c b/Demos/Device/LowLevel/GenericHID/Descriptors.c index 2dcdcf030..1d8765b54 100644 --- a/Demos/Device/LowLevel/GenericHID/Descriptors.c +++ b/Demos/Device/LowLevel/GenericHID/Descriptors.c @@ -143,7 +143,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | GENERIC_IN_EPNUM), + .EndpointAddress = GENERIC_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = GENERIC_EPSIZE, .PollingIntervalMS = 0x01 @@ -153,7 +153,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | GENERIC_OUT_EPNUM), + .EndpointAddress = GENERIC_OUT_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = GENERIC_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/GenericHID/Descriptors.h b/Demos/Device/LowLevel/GenericHID/Descriptors.h index 4647a05f0..e47220a1c 100644 --- a/Demos/Device/LowLevel/GenericHID/Descriptors.h +++ b/Demos/Device/LowLevel/GenericHID/Descriptors.h @@ -58,11 +58,11 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Generic HID reporting IN endpoint. */ - #define GENERIC_IN_EPNUM 1 + /** Endpoint address of the Generic HID reporting IN endpoint. */ + #define GENERIC_IN_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the Generic HID reporting OUT endpoint. */ - #define GENERIC_OUT_EPNUM 2 + /** Endpoint address of the Generic HID reporting OUT endpoint. */ + #define GENERIC_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) /** Size in bytes of the Generic HID reporting endpoint. */ #define GENERIC_EPSIZE 8 diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.c b/Demos/Device/LowLevel/GenericHID/GenericHID.c index 4d61acfb6..c36c33f7e 100644 --- a/Demos/Device/LowLevel/GenericHID/GenericHID.c +++ b/Demos/Device/LowLevel/GenericHID/GenericHID.c @@ -95,10 +95,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup HID Report Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(GENERIC_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - GENERIC_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(GENERIC_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT, - GENERIC_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(GENERIC_IN_EPADDR, EP_TYPE_INTERRUPT, GENERIC_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(GENERIC_OUT_EPADDR, EP_TYPE_INTERRUPT, GENERIC_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -200,7 +198,7 @@ void HID_Task(void) if (USB_DeviceState != DEVICE_STATE_Configured) return; - Endpoint_SelectEndpoint(GENERIC_OUT_EPNUM); + Endpoint_SelectEndpoint(GENERIC_OUT_EPADDR); /* Check to see if a packet has been sent from the host */ if (Endpoint_IsOUTReceived()) @@ -222,7 +220,7 @@ void HID_Task(void) Endpoint_ClearOUT(); } - Endpoint_SelectEndpoint(GENERIC_IN_EPNUM); + Endpoint_SelectEndpoint(GENERIC_IN_EPADDR); /* Check to see if the host is ready to accept another packet */ if (Endpoint_IsINReady()) diff --git a/Demos/Device/LowLevel/Joystick/Descriptors.c b/Demos/Device/LowLevel/Joystick/Descriptors.c index 272595d99..74f388c65 100644 --- a/Demos/Device/LowLevel/Joystick/Descriptors.c +++ b/Demos/Device/LowLevel/Joystick/Descriptors.c @@ -155,7 +155,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | JOYSTICK_EPNUM), + .EndpointAddress = JOYSTICK_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = JOYSTICK_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/Joystick/Descriptors.h b/Demos/Device/LowLevel/Joystick/Descriptors.h index 93b315b4e..bc90fb7cc 100644 --- a/Demos/Device/LowLevel/Joystick/Descriptors.h +++ b/Demos/Device/LowLevel/Joystick/Descriptors.h @@ -57,8 +57,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Joystick HID reporting IN endpoint. */ - #define JOYSTICK_EPNUM 1 + /** Endpoint address of the Joystick HID reporting IN endpoint. */ + #define JOYSTICK_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Joystick HID reporting IN endpoint. */ #define JOYSTICK_EPSIZE 8 diff --git a/Demos/Device/LowLevel/Joystick/Joystick.c b/Demos/Device/LowLevel/Joystick/Joystick.c index 9e84b61f9..cfdfaae2f 100644 --- a/Demos/Device/LowLevel/Joystick/Joystick.c +++ b/Demos/Device/LowLevel/Joystick/Joystick.c @@ -96,8 +96,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup HID Report Endpoint */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(JOYSTICK_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - JOYSTICK_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(JOYSTICK_EPADDR, EP_TYPE_INTERRUPT, JOYSTICK_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -183,7 +182,7 @@ void HID_Task(void) return; /* Select the Joystick Report Endpoint */ - Endpoint_SelectEndpoint(JOYSTICK_EPNUM); + Endpoint_SelectEndpoint(JOYSTICK_EPADDR); /* Check to see if the host is ready for another packet */ if (Endpoint_IsINReady()) diff --git a/Demos/Device/LowLevel/Keyboard/Descriptors.c b/Demos/Device/LowLevel/Keyboard/Descriptors.c index 46b9fdec5..2de04d348 100644 --- a/Demos/Device/LowLevel/Keyboard/Descriptors.c +++ b/Demos/Device/LowLevel/Keyboard/Descriptors.c @@ -160,7 +160,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_IN_EPNUM), + .EndpointAddress = KEYBOARD_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = KEYBOARD_EPSIZE, .PollingIntervalMS = 0x01 @@ -170,7 +170,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | KEYBOARD_OUT_EPNUM), + .EndpointAddress = KEYBOARD_OUT_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = KEYBOARD_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/Keyboard/Descriptors.h b/Demos/Device/LowLevel/Keyboard/Descriptors.h index 3c0ea1797..2e1fe3c81 100644 --- a/Demos/Device/LowLevel/Keyboard/Descriptors.h +++ b/Demos/Device/LowLevel/Keyboard/Descriptors.h @@ -59,11 +59,11 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Keyboard HID reporting IN endpoint. */ - #define KEYBOARD_IN_EPNUM 1 + /** Endpoint address of the Keyboard HID reporting IN endpoint. */ + #define KEYBOARD_IN_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the Keyboard HID reporting OUT endpoint. */ - #define KEYBOARD_OUT_EPNUM 2 + /** Endpoint address of the Keyboard HID reporting OUT endpoint. */ + #define KEYBOARD_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */ #define KEYBOARD_EPSIZE 8 diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.c b/Demos/Device/LowLevel/Keyboard/Keyboard.c index 45bf010fc..3755d09de 100644 --- a/Demos/Device/LowLevel/Keyboard/Keyboard.c +++ b/Demos/Device/LowLevel/Keyboard/Keyboard.c @@ -117,10 +117,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup HID Report Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT, - KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPADDR, EP_TYPE_INTERRUPT, KEYBOARD_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPADDR, EP_TYPE_INTERRUPT, KEYBOARD_EPSIZE, 1); /* Turn on Start-of-Frame events for tracking HID report period expiry */ USB_Device_EnableSOFEvents(); @@ -315,7 +313,7 @@ void SendNextReport(void) } /* Select the Keyboard Report Endpoint */ - Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM); + Endpoint_SelectEndpoint(KEYBOARD_IN_EPADDR); /* Check if Keyboard Endpoint Ready for Read/Write and if we should send a new report */ if (Endpoint_IsReadWriteAllowed() && SendReport) @@ -335,7 +333,7 @@ void SendNextReport(void) void ReceiveNextReport(void) { /* Select the Keyboard LED Report Endpoint */ - Endpoint_SelectEndpoint(KEYBOARD_OUT_EPNUM); + Endpoint_SelectEndpoint(KEYBOARD_OUT_EPADDR); /* Check if Keyboard LED Endpoint contains a packet */ if (Endpoint_IsOUTReceived()) diff --git a/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c b/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c index 9d02fa45c..9d592f7d4 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c +++ b/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c @@ -195,7 +195,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_IN_EPNUM), + .EndpointAddress = KEYBOARD_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_EPSIZE, .PollingIntervalMS = 0x01 @@ -205,7 +205,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | KEYBOARD_OUT_EPNUM), + .EndpointAddress = KEYBOARD_OUT_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_EPSIZE, .PollingIntervalMS = 0x01 @@ -242,7 +242,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_IN_EPNUM), + .EndpointAddress = MOUSE_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h b/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h index 573cb65b6..178f5ed99 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h +++ b/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h @@ -65,14 +65,14 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Keyboard HID reporting IN endpoint. */ - #define KEYBOARD_IN_EPNUM 1 + /** Endpoint address of the Keyboard HID reporting IN endpoint. */ + #define KEYBOARD_IN_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the Keyboard HID reporting OUT endpoint. */ - #define KEYBOARD_OUT_EPNUM 2 + /** Endpoint address of the Keyboard HID reporting OUT endpoint. */ + #define KEYBOARD_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) - /** Endpoint number of the Mouse HID reporting IN endpoint. */ - #define MOUSE_IN_EPNUM 3 + /** Endpoint address of the Mouse HID reporting IN endpoint. */ + #define MOUSE_IN_EPADDR (ENDPOINT_DIR_IN | 3) /** Size in bytes of each of the HID reporting IN and OUT endpoints. */ #define HID_EPSIZE 8 diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c index 4de6f64c9..a916659ea 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c +++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c @@ -104,14 +104,11 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup Keyboard HID Report Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - HID_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT, - HID_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPADDR, EP_TYPE_INTERRUPT, HID_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPADDR, EP_TYPE_INTERRUPT, HID_EPSIZE, 1); /* Setup Mouse HID Report Endpoint */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - HID_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_IN_EPADDR, EP_TYPE_INTERRUPT, HID_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -236,7 +233,7 @@ void Keyboard_HID_Task(void) } /* Select the Keyboard Report Endpoint */ - Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM); + Endpoint_SelectEndpoint(KEYBOARD_IN_EPADDR); /* Check if Keyboard Endpoint Ready for Read/Write */ if (Endpoint_IsReadWriteAllowed()) @@ -252,7 +249,7 @@ void Keyboard_HID_Task(void) } /* Select the Keyboard LED Report Endpoint */ - Endpoint_SelectEndpoint(KEYBOARD_OUT_EPNUM); + Endpoint_SelectEndpoint(KEYBOARD_OUT_EPADDR); /* Check if Keyboard LED Endpoint Ready for Read/Write */ if (Endpoint_IsReadWriteAllowed()) @@ -294,7 +291,7 @@ void Mouse_HID_Task(void) } /* Select the Mouse Report Endpoint */ - Endpoint_SelectEndpoint(MOUSE_IN_EPNUM); + Endpoint_SelectEndpoint(MOUSE_IN_EPADDR); /* Check if Mouse Endpoint Ready for Read/Write */ if (Endpoint_IsReadWriteAllowed()) diff --git a/Demos/Device/LowLevel/MIDI/Descriptors.c b/Demos/Device/LowLevel/MIDI/Descriptors.c index 9ad0e86a5..84898acf6 100644 --- a/Demos/Device/LowLevel/MIDI/Descriptors.c +++ b/Demos/Device/LowLevel/MIDI/Descriptors.c @@ -199,7 +199,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MIDI_STREAM_OUT_EPNUM), + .EndpointAddress = MIDI_STREAM_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MIDI_STREAM_EPSIZE, .PollingIntervalMS = 0x01 @@ -224,7 +224,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MIDI_STREAM_IN_EPNUM), + .EndpointAddress = MIDI_STREAM_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MIDI_STREAM_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/MIDI/Descriptors.h b/Demos/Device/LowLevel/MIDI/Descriptors.h index 5415a31cd..7947a463c 100644 --- a/Demos/Device/LowLevel/MIDI/Descriptors.h +++ b/Demos/Device/LowLevel/MIDI/Descriptors.h @@ -42,11 +42,11 @@ #include <avr/pgmspace.h> /* Macros: */ - /** Endpoint number of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ - #define MIDI_STREAM_IN_EPNUM 1 + /** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ + #define MIDI_STREAM_IN_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */ - #define MIDI_STREAM_OUT_EPNUM 2 + /** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */ + #define MIDI_STREAM_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) /** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */ #define MIDI_STREAM_EPSIZE 64 diff --git a/Demos/Device/LowLevel/MIDI/MIDI.c b/Demos/Device/LowLevel/MIDI/MIDI.c index a29a8c86b..f8bc4e917 100644 --- a/Demos/Device/LowLevel/MIDI/MIDI.c +++ b/Demos/Device/LowLevel/MIDI/MIDI.c @@ -94,10 +94,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup MIDI Data Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -114,7 +112,7 @@ void MIDI_Task(void) if (USB_DeviceState != DEVICE_STATE_Configured) return; - Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPNUM); + Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPADDR); if (Endpoint_IsINReady()) { @@ -182,7 +180,7 @@ void MIDI_Task(void) } /* Select the MIDI OUT stream */ - Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPNUM); + Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPADDR); /* Check if a MIDI command has been received */ if (Endpoint_IsOUTReceived()) diff --git a/Demos/Device/LowLevel/MassStorage/Descriptors.c b/Demos/Device/LowLevel/MassStorage/Descriptors.c index fb829423a..0ab09b6a5 100644 --- a/Demos/Device/LowLevel/MassStorage/Descriptors.c +++ b/Demos/Device/LowLevel/MassStorage/Descriptors.c @@ -118,7 +118,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 @@ -128,7 +128,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/MassStorage/Descriptors.h b/Demos/Device/LowLevel/MassStorage/Descriptors.h index 0e7a91ffd..34a85f6d1 100644 --- a/Demos/Device/LowLevel/MassStorage/Descriptors.h +++ b/Demos/Device/LowLevel/MassStorage/Descriptors.h @@ -42,11 +42,11 @@ #include <avr/pgmspace.h> /* Macros: */ - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.c b/Demos/Device/LowLevel/MassStorage/MassStorage.c index 947636cf8..0e8e1083b 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.c +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.c @@ -118,10 +118,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup Mass Storage Data Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - MASS_STORAGE_IO_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - MASS_STORAGE_IO_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_IN_EPADDR, EP_TYPE_BULK, MASS_STORAGE_IO_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_OUT_EPADDR, EP_TYPE_BULK, MASS_STORAGE_IO_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -180,7 +178,7 @@ void MassStorage_Task(void) /* Check direction of command, select Data IN endpoint if data is from the device */ if (CommandBlock.Flags & MS_COMMAND_DIR_DATA_IN) - Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR); /* Decode the received SCSI command, set returned status code */ CommandStatus.Status = SCSI_DecodeSCSICommand() ? MS_SCSI_COMMAND_Pass : MS_SCSI_COMMAND_Fail; @@ -206,13 +204,13 @@ void MassStorage_Task(void) if (IsMassStoreReset) { /* Reset the data endpoint banks */ - Endpoint_ResetEndpoint(MASS_STORAGE_OUT_EPNUM); - Endpoint_ResetEndpoint(MASS_STORAGE_IN_EPNUM); + Endpoint_ResetEndpoint(MASS_STORAGE_OUT_EPADDR); + Endpoint_ResetEndpoint(MASS_STORAGE_IN_EPADDR); - Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR); Endpoint_ClearStall(); Endpoint_ResetDataToggle(); - Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR); Endpoint_ClearStall(); Endpoint_ResetDataToggle(); @@ -231,7 +229,7 @@ static bool ReadInCommandBlock(void) uint16_t BytesTransferred; /* Select the Data Out endpoint */ - Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR); /* Abort if no command has been sent from the host */ if (!(Endpoint_IsOUTReceived())) @@ -256,7 +254,7 @@ static bool ReadInCommandBlock(void) { /* Stall both data pipes until reset by host */ Endpoint_StallTransaction(); - Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR); Endpoint_StallTransaction(); return false; @@ -286,7 +284,7 @@ static void ReturnCommandStatus(void) uint16_t BytesTransferred; /* Select the Data Out endpoint */ - Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR); /* While data pipe is stalled, wait until the host issues a control request to clear the stall */ while (Endpoint_IsStalled()) @@ -297,7 +295,7 @@ static void ReturnCommandStatus(void) } /* Select the Data In endpoint */ - Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR); /* While data pipe is stalled, wait until the host issues a control request to clear the stall */ while (Endpoint_IsStalled()) diff --git a/Demos/Device/LowLevel/Mouse/Descriptors.c b/Demos/Device/LowLevel/Mouse/Descriptors.c index d42fb835c..bd0cb6165 100644 --- a/Demos/Device/LowLevel/Mouse/Descriptors.c +++ b/Demos/Device/LowLevel/Mouse/Descriptors.c @@ -155,7 +155,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_EPNUM), + .EndpointAddress = MOUSE_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MOUSE_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/Mouse/Descriptors.h b/Demos/Device/LowLevel/Mouse/Descriptors.h index da78dd0ff..abcd938a8 100644 --- a/Demos/Device/LowLevel/Mouse/Descriptors.h +++ b/Demos/Device/LowLevel/Mouse/Descriptors.h @@ -41,6 +41,13 @@ #include <avr/pgmspace.h> + /* Macros: */ + /** Endpoint address of the Mouse HID reporting IN endpoint. */ + #define MOUSE_EPADDR (ENDPOINT_DIR_IN | 1) + + /** Size in bytes of the Mouse HID reporting IN endpoint. */ + #define MOUSE_EPSIZE 8 + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which @@ -56,13 +63,6 @@ USB_Descriptor_Endpoint_t HID_ReportINEndpoint; } USB_Descriptor_Configuration_t; - /* Macros: */ - /** Endpoint number of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPNUM 1 - - /** Size in bytes of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPSIZE 8 - /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, diff --git a/Demos/Device/LowLevel/Mouse/Mouse.c b/Demos/Device/LowLevel/Mouse/Mouse.c index 98da9be92..e9f92e4a2 100644 --- a/Demos/Device/LowLevel/Mouse/Mouse.c +++ b/Demos/Device/LowLevel/Mouse/Mouse.c @@ -116,8 +116,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup HID Report Endpoint */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - MOUSE_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_EPADDR, EP_TYPE_INTERRUPT, MOUSE_EPSIZE, 1); /* Turn on Start-of-Frame events for tracking HID report period expiry */ USB_Device_EnableSOFEvents(); @@ -271,7 +270,7 @@ void SendNextReport(void) } /* Select the Mouse Report Endpoint */ - Endpoint_SelectEndpoint(MOUSE_EPNUM); + Endpoint_SelectEndpoint(MOUSE_EPADDR); /* Check if Mouse Endpoint Ready for Read/Write and if we should send a new report */ if (Endpoint_IsReadWriteAllowed() && SendReport) diff --git a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c index 41bc4b59e..86cc420c7 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c @@ -131,7 +131,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -157,7 +157,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -167,7 +167,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h index 9ffa5262f..6337335ac 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h @@ -42,14 +42,14 @@ #include <avr/pgmspace.h> /* Macros: */ - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 1 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 2 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 2) - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 3 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 3) /** Size in bytes of the CDC data IN and OUT endpoints. */ #define CDC_TXRX_EPSIZE 64 diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c index a36ecf4bb..c041bb91a 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c +++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c @@ -104,12 +104,9 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup RNDIS Data Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_RX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - CDC_NOTIFICATION_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -170,7 +167,7 @@ void EVENT_USB_Device_ControlRequest(void) void RNDIS_Task(void) { /* Select the notification endpoint */ - Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPNUM); + Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPADDR); /* Check if a message response is ready for the host */ if (Endpoint_IsINReady() && ResponseReady) @@ -201,7 +198,7 @@ void RNDIS_Task(void) RNDIS_Packet_Message_t RNDISPacketHeader; /* Select the data OUT endpoint */ - Endpoint_SelectEndpoint(CDC_RX_EPNUM); + Endpoint_SelectEndpoint(CDC_RX_EPADDR); /* Check if the data OUT endpoint contains data, and that the IN buffer is empty */ if (Endpoint_IsOUTReceived() && !(FrameIN.FrameLength)) @@ -227,7 +224,7 @@ void RNDIS_Task(void) } /* Select the data IN endpoint */ - Endpoint_SelectEndpoint(CDC_TX_EPNUM); + Endpoint_SelectEndpoint(CDC_TX_EPADDR); /* Check if the data IN endpoint is ready for more data, and that the IN buffer is full */ if (Endpoint_IsINReady() && FrameOUT.FrameLength) diff --git a/Demos/Device/LowLevel/VirtualSerial/Descriptors.c b/Demos/Device/LowLevel/VirtualSerial/Descriptors.c index f4e9fb324..0858bc47c 100644 --- a/Demos/Device/LowLevel/VirtualSerial/Descriptors.c +++ b/Demos/Device/LowLevel/VirtualSerial/Descriptors.c @@ -143,7 +143,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -169,7 +169,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -179,7 +179,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/VirtualSerial/Descriptors.h b/Demos/Device/LowLevel/VirtualSerial/Descriptors.h index 765345bc3..36ec8f9ff 100644 --- a/Demos/Device/LowLevel/VirtualSerial/Descriptors.h +++ b/Demos/Device/LowLevel/VirtualSerial/Descriptors.h @@ -42,14 +42,14 @@ #include <avr/pgmspace.h> /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c index 93fd4353e..7d185481d 100644 --- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c +++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c @@ -109,12 +109,9 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup CDC Data Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - CDC_NOTIFICATION_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_RX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); /* Reset line encoding baud rate so that the host knows to send new values */ LineEncoding.BaudRateBPS = 0; @@ -201,7 +198,7 @@ void CDC_Task(void) ActionSent = true; /* Select the Serial Tx Endpoint */ - Endpoint_SelectEndpoint(CDC_TX_EPNUM); + Endpoint_SelectEndpoint(CDC_TX_EPADDR); /* Write the String to the Endpoint */ Endpoint_Write_Stream_LE(ReportString, strlen(ReportString), NULL); @@ -225,7 +222,7 @@ void CDC_Task(void) } /* Select the Serial Rx Endpoint */ - Endpoint_SelectEndpoint(CDC_RX_EPNUM); + Endpoint_SelectEndpoint(CDC_RX_EPADDR); /* Throw away any received data from the host */ if (Endpoint_IsOUTReceived()) diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c b/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c index 2ee35de87..33a825d9a 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c @@ -136,7 +136,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_EPNUM), + .EndpointAddress = MOUSE_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MOUSE_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h b/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h index da78dd0ff..14cb8e9a3 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h @@ -57,8 +57,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPNUM 1 + /** Endpoint address of the Mouse HID reporting IN endpoint. */ + #define MOUSE_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPSIZE 8 diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c b/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c index 16fc3fb2b..39a682a60 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Device_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = MOUSE_EPNUM, - .ReportINEndpointSize = MOUSE_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = MOUSE_EPADDR, + .Size = MOUSE_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevMouseHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), }, diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c b/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c index a71e85b5a..29def30d5 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c @@ -44,9 +44,16 @@ USB_ClassInfo_HID_Host_t Mouse_HID_Host_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataOUTPipeNumber = 2, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataINPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_MouseBootProtocol, }, }; diff --git a/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.c b/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.c index d0737acd7..4c53cc221 100644 --- a/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.c +++ b/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.c @@ -44,12 +44,16 @@ USB_ClassInfo_AOA_Host_t AndroidDevice_AOA_Interface = {
.Config =
{
- .DataINPipeNumber = 1,
- .DataINPipeDoubleBank = false,
-
- .DataOUTPipeNumber = 2,
- .DataOUTPipeDoubleBank = false,
-
+ .DataINPipe =
+ {
+ .Address = (PIPE_DIR_IN | 1),
+ .Banks = 1,
+ },
+ .DataOUTPipe =
+ {
+ .Address = (PIPE_DIR_OUT | 2),
+ .Banks = 1,
+ },
.PropertyStrings =
{
[AOA_STRING_Manufacturer] = "Dean Camera",
diff --git a/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c b/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c index 3e4a69a05..aa274932f 100644 --- a/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c +++ b/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c @@ -44,7 +44,10 @@ USB_ClassInfo_Audio_Host_t Microphone_Audio_Interface = { .Config = { - .DataINPipeNumber = 1, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + }, }, }; @@ -179,7 +182,7 @@ void EVENT_USB_Host_DeviceEnumerationComplete(void) } USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000); - if (Audio_Host_GetSetEndpointProperty(&Microphone_Audio_Interface, Microphone_Audio_Interface.Config.DataINPipeNumber, + if (Audio_Host_GetSetEndpointProperty(&Microphone_Audio_Interface, Microphone_Audio_Interface.Config.DataINPipe.Address, AUDIO_REQ_SetCurrent, AUDIO_EPCONTROL_SamplingFreq, sizeof(SampleRate), &SampleRate) != HOST_SENDCONTROL_Successful) { diff --git a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c index 783b0a5e5..833be1b2c 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c +++ b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c @@ -44,7 +44,10 @@ USB_ClassInfo_Audio_Host_t Speaker_Audio_Interface = { .Config = { - .DataOUTPipeNumber = 1, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + }, }, }; @@ -187,7 +190,7 @@ void EVENT_USB_Host_DeviceEnumerationComplete(void) } USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000); - if (Audio_Host_GetSetEndpointProperty(&Speaker_Audio_Interface, Speaker_Audio_Interface.Config.DataOUTPipeNumber, + if (Audio_Host_GetSetEndpointProperty(&Speaker_Audio_Interface, Speaker_Audio_Interface.Config.DataOUTPipe.Address, AUDIO_REQ_SetCurrent, AUDIO_EPCONTROL_SamplingFreq, sizeof(SampleRate), &SampleRate) != HOST_SENDCONTROL_Successful) { diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c index 5d912497d..18c02d769 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c @@ -47,14 +47,17 @@ USB_ClassInfo_HID_Host_t Joystick_HID_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_NonBootProtocol, - .HIDParserData = &HIDReportInfo }, }; diff --git a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c index f67cd1161..69499089b 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c +++ b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c @@ -44,12 +44,16 @@ USB_ClassInfo_HID_Host_t Keyboard_HID_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_KeyboardBootProtocol, }, }; diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c index 4247e9e56..6ef182000 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c @@ -47,14 +47,17 @@ USB_ClassInfo_HID_Host_t Keyboard_HID_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_NonBootProtocol, - .HIDParserData = &HIDReportInfo }, }; diff --git a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c index 8293fbd3b..129bd3d62 100644 --- a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c +++ b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c @@ -44,11 +44,16 @@ USB_ClassInfo_MIDI_Host_t Keyboard_MIDI_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, }, }; diff --git a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c index 10c7f7921..aacc07879 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c +++ b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c @@ -44,11 +44,16 @@ USB_ClassInfo_MS_Host_t FlashDisk_MS_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, }, }; diff --git a/Demos/Host/ClassDriver/MouseHost/MouseHost.c b/Demos/Host/ClassDriver/MouseHost/MouseHost.c index 4272591d5..1290e4855 100644 --- a/Demos/Host/ClassDriver/MouseHost/MouseHost.c +++ b/Demos/Host/ClassDriver/MouseHost/MouseHost.c @@ -44,12 +44,16 @@ USB_ClassInfo_HID_Host_t Mouse_HID_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_MouseBootProtocol, }, }; diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c index 857d49412..8004b5ca1 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c +++ b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c @@ -47,14 +47,17 @@ USB_ClassInfo_HID_Host_t Mouse_HID_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_NonBootProtocol, - .HIDParserData = &HIDReportInfo }, }; diff --git a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c index 3df0eedf2..51157a315 100644 --- a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c +++ b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c @@ -44,11 +44,16 @@ USB_ClassInfo_PRNT_Host_t Printer_PRNT_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, }, }; diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c index f03ee4967..d27aab143 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c @@ -47,16 +47,22 @@ USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - - .NotificationPipeNumber = 3, - .NotificationPipeDoubleBank = false, - - .HostMaxPacketSize = sizeof(PacketBuffer), + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, + .NotificationPipe = + { + .Address = (PIPE_DIR_IN | 3), + .Banks = 1, + }, + .HostMaxPacketSize = sizeof(PacketBuffer), }, }; diff --git a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c index eeac14d11..9a89452af 100644 --- a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c +++ b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c @@ -44,14 +44,21 @@ USB_ClassInfo_SI_Host_t DigitalCamera_SI_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - - .EventsPipeNumber = 3, - .EventsPipeDoubleBank = false, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, + .EventsPipe = + { + .Address = (PIPE_DIR_IN | 3), + .Banks = 1, + }, }, }; diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c index 631925e45..bce7804b4 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c +++ b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c @@ -44,14 +44,21 @@ USB_ClassInfo_CDC_Host_t VirtualSerial_CDC_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - - .NotificationPipeNumber = 3, - .NotificationPipeDoubleBank = false, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, + .NotificationPipe = + { + .Address = (PIPE_DIR_IN | 3), + .Banks = 1, + }, }, }; diff --git a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c index 7d1050601..fa19052a8 100644 --- a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c +++ b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c @@ -105,16 +105,13 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the Bluetooth data IN pipe */ - Pipe_ConfigurePipe(BLUETOOTH_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(BLUETOOTH_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the Bluetooth data OUT pipe */ - Pipe_ConfigurePipe(BLUETOOTH_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(BLUETOOTH_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Configure the Bluetooth events pipe */ - Pipe_ConfigurePipe(BLUETOOTH_EVENTS_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - EventsEndpoint->EndpointAddress, EventsEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(BLUETOOTH_EVENTS_PIPE, EP_TYPE_INTERRUPT, EventsEndpoint->EndpointAddress, EventsEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(EventsEndpoint->PollingIntervalMS); /* Valid data found, return success */ diff --git a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h index 9c40fcdcb..c46add71a 100644 --- a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h +++ b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h @@ -40,9 +40,9 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - #define BLUETOOTH_DATA_IN_PIPE 1 - #define BLUETOOTH_DATA_OUT_PIPE 2 - #define BLUETOOTH_EVENTS_PIPE 3 + #define BLUETOOTH_DATA_IN_PIPE (PIPE_DIR_IN | 1) + #define BLUETOOTH_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) + #define BLUETOOTH_EVENTS_PIPE (PIPE_DIR_IN | 3) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c b/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c index 1b8613b69..6db853267 100644 --- a/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c @@ -95,12 +95,10 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the Android Accessory data IN pipe */ - Pipe_ConfigurePipe(ANDROID_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(ANDROID_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the Android Accessory data OUT pipe */ - Pipe_ConfigurePipe(ANDROID_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(ANDROID_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Valid data found, return success */ return SuccessfulConfigRead; diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h b/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h index 05e1b91e1..53b7280b4 100644 --- a/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h @@ -40,8 +40,11 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - #define ANDROID_DATA_IN_PIPE 1 - #define ANDROID_DATA_OUT_PIPE 2 + /** Pipe address of the Android Accessory data IN pipe. */ + #define ANDROID_DATA_IN_PIPE (PIPE_DIR_IN | 1) + + /** Pipe address of the Android Accessory data OUT pipe. */ + #define ANDROID_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c index b26dbb80e..9274e633d 100644 --- a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c @@ -130,8 +130,7 @@ uint8_t ProcessConfigurationDescriptor(void) StreamingEndpointAddress = DataINEndpoint->EndpointAddress; /* Configure the Audio data IN pipe */ - Pipe_ConfigurePipe(AUDIO_DATA_IN_PIPE, EP_TYPE_ISOCHRONOUS, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_DOUBLE); + Pipe_ConfigurePipe(AUDIO_DATA_IN_PIPE, EP_TYPE_ISOCHRONOUS, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 2); /* Valid data found, return success */ return SuccessfulConfigRead; diff --git a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h index a5f425900..84d27c7e6 100644 --- a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "AudioInputHost.h" /* Macros: */ - /** Pipe number for the Audio data IN pipe. */ - #define AUDIO_DATA_IN_PIPE 1 + /** Pipe address for the Audio data IN pipe. */ + #define AUDIO_DATA_IN_PIPE (PIPE_DIR_IN | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf index b98cf1f14..44513ef35 100644 --- a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "LUFA Library - Audio Input Host" +PROJECT_NAME = "LUFA Library - Audio Input Host Demo" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c index 99980fd3d..cc2506274 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c @@ -130,8 +130,7 @@ uint8_t ProcessConfigurationDescriptor(void) StreamingEndpointAddress = DataOUTEndpoint->EndpointAddress; /* Configure the Audio data OUT pipe */ - Pipe_ConfigurePipe(AUDIO_DATA_OUT_PIPE, EP_TYPE_ISOCHRONOUS, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_DOUBLE); + Pipe_ConfigurePipe(AUDIO_DATA_OUT_PIPE, EP_TYPE_ISOCHRONOUS, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 2); /* Valid data found, return success */ return SuccessfulConfigRead; diff --git a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h index dcf367e15..0c4f06766 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "AudioOutputHost.h" /* Macros: */ - /** Pipe number for the Audio data OUT pipe. */ - #define AUDIO_DATA_OUT_PIPE 1 + /** Pipe address for the Audio data OUT pipe. */ + #define AUDIO_DATA_OUT_PIPE (PIPE_DIR_OUT | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf index 55c9bb563..9cb0e55a2 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "LUFA Library - Audio Output Host" +PROJECT_NAME = "LUFA Library - Audio Output Host Demo" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c index 6df253cb5..9067450e2 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c @@ -109,16 +109,14 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Check if the HID interface contained an optional OUT data endpoint */ if (DataOUTEndpoint) { /* Configure the HID data OUT pipe */ - Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); } /* Valid data found, return success */ diff --git a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h index 4614893d5..547f1545b 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h @@ -42,11 +42,11 @@ #include "GenericHIDHost.h" /* Macros: */ - /** Pipe number for the HID data IN pipe. */ - #define HID_DATA_IN_PIPE 1 + /** Pipe address for the HID data IN pipe. */ + #define HID_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number for the HID data OUT pipe. */ - #define HID_DATA_OUT_PIPE 2 + /** Pipe address for the HID data OUT pipe. */ + #define HID_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c index 4f7a0d61b..be6eb09cd 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c @@ -110,8 +110,7 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(JOYSTICK_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(JOYSTICK_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Get the HID report size from the HID report descriptor */ diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h index 69fdfedf2..fba5713b2 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "HIDReport.h" /* Macros: */ - /** Pipe number for the joystick report data pipe. */ - #define JOYSTICK_DATA_IN_PIPE 1 + /** Pipe address for the joystick report data pipe. */ + #define JOYSTICK_DATA_IN_PIPE (PIPE_DIR_IN | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf index 4366e6edd..65c60866b 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "LUFA Library - Joystick Host (Using HID Descriptor Parser)" +PROJECT_NAME = "LUFA Library - Joystick Host Demo (Using HID Descriptor Parser)" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c index cfcee7b8b..73dc5dfe5 100644 --- a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c @@ -98,8 +98,7 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Valid data found, return success */ diff --git a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h index 5b44d3fd5..eb09f695f 100644 --- a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "KeyboardHost.h" /* Macros: */ - /** Pipe number for the keyboard data IN pipe. */ - #define KEYBOARD_DATA_IN_PIPE 1 + /** Pipe address for the keyboard data IN pipe. */ + #define KEYBOARD_DATA_IN_PIPE (PIPE_DIR_IN | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c index 765b325f0..ddd43590b 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c @@ -110,8 +110,7 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Get the HID report size from the HID report descriptor */ diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h index ffa2afd8e..c40211cb0 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "HIDReport.h" /* Macros: */ - /** Pipe number for the keyboard report data pipe. */ - #define KEYBOARD_DATA_IN_PIPE 1 + /** Pipe address for the keyboard report data IN pipe. */ + #define KEYBOARD_DATA_IN_PIPE (PIPE_DIR_IN | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf index 9f76d7efd..3e481571d 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "LUFA Library - Keyboard Host (Using HID Descriptor Parser)" +PROJECT_NAME = "LUFA Library - Keyboard Host Demo (Using HID Descriptor Parser)" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c index 39e513cf6..70381ea56 100644 --- a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c @@ -105,12 +105,10 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the MIDI data IN pipe */ - Pipe_ConfigurePipe(MIDI_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(MIDI_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the MIDI data OUT pipe */ - Pipe_ConfigurePipe(MIDI_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(MIDI_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Valid data found, return success */ return SuccessfulConfigRead; diff --git a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h index d41513e4e..40d4dc9cc 100644 --- a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h @@ -42,11 +42,11 @@ #include "MIDIHost.h" /* Macros: */ - /** Pipe number for the MIDI data IN pipe. */ - #define MIDI_DATA_IN_PIPE 1 + /** Pipe address for the MIDI data IN pipe. */ + #define MIDI_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number for the MIDI data OUT pipe. */ - #define MIDI_DATA_OUT_PIPE 2 + /** Pipe address for the MIDI data OUT pipe. */ + #define MIDI_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c index 566cdb10c..0e967f972 100644 --- a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c @@ -105,12 +105,10 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the Mass Storage data IN pipe */ - Pipe_ConfigurePipe(MASS_STORE_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(MASS_STORE_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the Mass Storage data OUT pipe */ - Pipe_ConfigurePipe(MASS_STORE_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(MASS_STORE_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Valid data found, return success */ return SuccessfulConfigRead; diff --git a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h index a40debd98..eb0746b04 100644 --- a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h @@ -51,11 +51,11 @@ /** Interface Protocol value for the Bulk Only transport protocol. */ #define MASS_STORE_PROTOCOL 0x50 - /** Pipe number of the Mass Storage data IN pipe. */ - #define MASS_STORE_DATA_IN_PIPE 1 + /** Pipe address of the Mass Storage data IN pipe. */ + #define MASS_STORE_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number of the Mass Storage data OUT pipe. */ - #define MASS_STORE_DATA_OUT_PIPE 2 + /** Pipe address of the Mass Storage data OUT pipe. */ + #define MASS_STORE_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c index c33e08769..4992e3a67 100644 --- a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c @@ -98,8 +98,7 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Valid data found, return success */ diff --git a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h index 9619c44ac..14051a6a9 100644 --- a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "MouseHost.h" /* Macros: */ - /** Pipe number for the mouse data IN pipe. */ - #define MOUSE_DATA_IN_PIPE 1 + /** Pipe address for the mouse data IN pipe. */ + #define MOUSE_DATA_IN_PIPE (PIPE_DIR_IN | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c index c6647007c..7d63d2bdb 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c @@ -110,8 +110,7 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Get the HID report size from the HID report descriptor */ diff --git a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h index 799761bba..0a2582bfe 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "HIDReport.h" /* Macros: */ - /** Pipe number for the mouse report data pipe. */ - #define MOUSE_DATA_IN_PIPE 1 + /** Pipe address for the mouse report data IN pipe. */ + #define MOUSE_DATA_IN_PIPE (ENDPOINT_DIR_IN | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf index fcf83567f..b41e8d85a 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "LUFA Library - Mouse Host (Using HID Descriptor Parser)" +PROJECT_NAME = "LUFA Library - Mouse Host Demo (Using HID Descriptor Parser)" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c index f259c1fd8..922734f33 100644 --- a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c @@ -108,12 +108,10 @@ uint8_t ProcessConfigurationDescriptor(void) PrinterAltSetting = PrinterInterface->AlternateSetting; /* Configure the Printer data IN pipe */ - Pipe_ConfigurePipe(PRINTER_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(PRINTER_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the Printer data OUT pipe */ - Pipe_ConfigurePipe(PRINTER_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(PRINTER_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Valid data found, return success */ return SuccessfulConfigRead; diff --git a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h index cc9e2cb44..d5a32cddf 100644 --- a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h @@ -38,11 +38,11 @@ #include "Lib/PrinterCommands.h" /* Macros: */ - /** Pipe number of the Printer data IN pipe. */ - #define PRINTER_DATA_IN_PIPE 1 + /** Pipe address of the Printer data IN pipe. */ + #define PRINTER_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number of the Printer data OUT pipe. */ - #define PRINTER_DATA_OUT_PIPE 2 + /** Pipe address of the Printer data OUT pipe. */ + #define PRINTER_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c index 04930009e..df317ef62 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c @@ -131,16 +131,13 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the RNDIS data IN pipe */ - Pipe_ConfigurePipe(RNDIS_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(RNDIS_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the RNDIS data OUT pipe */ - Pipe_ConfigurePipe(RNDIS_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(RNDIS_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Configure the RNDIS notification pipe */ - Pipe_ConfigurePipe(RNDIS_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(RNDIS_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(NotificationEndpoint->PollingIntervalMS); /* Valid data found, return success */ diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h index e9cf19f4c..19f26b408 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h @@ -42,14 +42,14 @@ #include "RNDISEthernetHost.h" /* Macros: */ - /** Pipe number for the RNDIS data IN pipe. */ - #define RNDIS_DATA_IN_PIPE 1 + /** Pipe address for the RNDIS data IN pipe. */ + #define RNDIS_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number for the RNDIS data OUT pipe. */ - #define RNDIS_DATA_OUT_PIPE 2 + /** Pipe address for the RNDIS data OUT pipe. */ + #define RNDIS_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) - /** Pipe number for the RNDIS notification pipe. */ - #define RNDIS_NOTIFICATION_PIPE 3 + /** Pipe address for the RNDIS notification IN pipe. */ + #define RNDIS_NOTIFICATION_PIPE (PIPE_DIR_IN | 3) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c index 269dc3ba4..c5c78ce60 100644 --- a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c @@ -115,16 +115,13 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the Still Image data IN pipe */ - Pipe_ConfigurePipe(SIMAGE_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(SIMAGE_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the Still Image data OUT pipe */ - Pipe_ConfigurePipe(SIMAGE_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(SIMAGE_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Configure the Still Image events pipe */ - Pipe_ConfigurePipe(SIMAGE_EVENTS_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - EventsEndpoint->EndpointAddress, EventsEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(SIMAGE_EVENTS_PIPE, EP_TYPE_INTERRUPT, EventsEndpoint->EndpointAddress, EventsEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(EventsEndpoint->PollingIntervalMS); /* Valid data found, return success */ diff --git a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h index 04b81a281..93dcfc644 100644 --- a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h @@ -42,14 +42,14 @@ #include "StillImageHost.h" /* Macros: */ - /** Pipe number of the Still Image data IN pipe. */ - #define SIMAGE_DATA_IN_PIPE 1 + /** Pipe address of the Still Image data IN pipe. */ + #define SIMAGE_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number of the Still Image data OUT pipe. */ - #define SIMAGE_DATA_OUT_PIPE 2 + /** Pipe address of the Still Image data OUT pipe. */ + #define SIMAGE_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) - /** Pipe number of the Still Image events pipe. */ - #define SIMAGE_EVENTS_PIPE 3 + /** Pipe address of the Still Image events IN pipe. */ + #define SIMAGE_EVENTS_PIPE (PIPE_DIR_IN | 3) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c index 4126d761d..552b02aff 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c @@ -131,16 +131,13 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the CDC data IN pipe */ - Pipe_ConfigurePipe(CDC_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(CDC_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the CDC data OUT pipe */ - Pipe_ConfigurePipe(CDC_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(CDC_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Configure the CDC notification pipe */ - Pipe_ConfigurePipe(CDC_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(CDC_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(NotificationEndpoint->PollingIntervalMS); /* Valid data found, return success */ diff --git a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h index c5a60b48a..e9f12dcc4 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h @@ -42,14 +42,14 @@ #include "VirtualSerialHost.h" /* Macros: */ - /** Pipe number for the CDC data IN pipe. */ - #define CDC_DATA_IN_PIPE 1 + /** Pipe address for the CDC data IN pipe. */ + #define CDC_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number for the CDC data OUT pipe. */ - #define CDC_DATA_OUT_PIPE 2 + /** Pipe address for the CDC data OUT pipe. */ + #define CDC_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) - /** Pipe number for the CDC notification pipe. */ - #define CDC_NOTIFICATION_PIPE 3 + /** Pipe address for the CDC notification IN pipe. */ + #define CDC_NOTIFICATION_PIPE (PIPE_DIR_IN | 3) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/LUFA/Common/ArchitectureSpecific.h b/LUFA/Common/ArchitectureSpecific.h index 3ba7a5c0a..f7dca6631 100644 --- a/LUFA/Common/ArchitectureSpecific.h +++ b/LUFA/Common/ArchitectureSpecific.h @@ -63,25 +63,27 @@ /* Public Interface - May be used in end-application: */ /* Macros: */ - #if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__) - /** Disables the AVR's JTAG bus in software, until a system reset. This will override the current JTAG - * status as set by the JTAGEN fuse, disabling JTAG debugging and reverting the JTAG pins back to GPIO - * mode. - * - * \note This macro is not available for all architectures. - */ - #define JTAG_DISABLE() MACROS{ \ - __asm__ __volatile__ ( \ - "in __tmp_reg__,__SREG__" "\n\t" \ - "cli" "\n\t" \ - "out %1, %0" "\n\t" \ - "out __SREG__, __tmp_reg__" "\n\t" \ - "out %1, %0" "\n\t" \ - : \ - : "r" (1 << JTD), \ - "M" (_SFR_IO_ADDR(MCUCR)) \ - : "r0"); \ - }MACROE + #if (ARCH == ARCH_AVR8) || (ARCH == ARCH_XMEGA) || defined(__DOXYGEN__) + #if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__) + /** Disables the AVR's JTAG bus in software, until a system reset. This will override the current JTAG + * status as set by the JTAGEN fuse, disabling JTAG debugging and reverting the JTAG pins back to GPIO + * mode. + * + * \note This macro is not available for all architectures. + */ + #define JTAG_DISABLE() MACROS{ \ + __asm__ __volatile__ ( \ + "in __tmp_reg__,__SREG__" "\n\t" \ + "cli" "\n\t" \ + "out %1, %0" "\n\t" \ + "out __SREG__, __tmp_reg__" "\n\t" \ + "out %1, %0" "\n\t" \ + : \ + : "r" (1 << JTD), \ + "M" (_SFR_IO_ADDR(MCUCR)) \ + : "r0"); \ + }MACROE + #endif /** Defines a volatile \c NOP statement which cannot be optimized out by the compiler, and thus can always * be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimizer @@ -116,9 +118,10 @@ * * \param[in] Condition Condition that will be evaluated, */ - #define STDOUT_ASSERT(Condition) MACROS{ if (!(x)) { printf_P(PSTR("%s: Function \"%s\", Line %d: " \ - "Assertion \"%s\" failed.\r\n"), \ - __FILE__, __func__, __LINE__, #Condition); } }MACROE + #define STDOUT_ASSERT(Condition) MACROS{ if (!(x)) { \ + printf_P(PSTR("%s: Function \"%s\", Line %d: " \ + "Assertion \"%s\" failed.\r\n"), \ + __FILE__, __func__, __LINE__, #Condition); } }MACROE #if !defined(pgm_read_ptr) || defined(__DOXYGEN__) /** Reads a pointer out of PROGMEM space on the AVR8 architecture. This is currently a wrapper for the @@ -135,6 +138,14 @@ */ #define pgm_read_ptr(Address) (void*)pgm_read_word(Address) #endif + #elif (ARCH == ARCH_UC3) + #define JTAG_DEBUG_POINT() __asm__ __volatile__ ("nop" ::) + #define JTAG_DEBUG_BREAK() __asm__ __volatile__ ("breakpoint" ::) + #define JTAG_ASSERT(Condition) MACROS{ if (!(Condition)) { JTAG_DEBUG_BREAK(); } }MACROE + #define STDOUT_ASSERT(Condition) MACROS{ if (!(x)) { \ + printf("%s: Function \"%s\", Line %d: " \ + "Assertion \"%s\" failed.\r\n"), \ + __FILE__, __func__, __LINE__, #Condition); } }MACROE #endif /* Disable C linkage for C++ Compilers: */ diff --git a/LUFA/DoxygenPages/ChangeLog.txt b/LUFA/DoxygenPages/ChangeLog.txt index b35a39cb8..c0193f276 100644 --- a/LUFA/DoxygenPages/ChangeLog.txt +++ b/LUFA/DoxygenPages/ChangeLog.txt @@ -10,6 +10,8 @@ * <b>New:</b> * - Core: * - Added support for the BitWizard Multio and Big-Multio boards + * - Added new Endpoint_ConfigureEndpointTable() function + * - Added new Pipe_ConfigurePipeTable() function * - Library Applications: * - Modified the CDC Host demos to set a default CDC Line Encoding on enumerated devices * - Added Dataflash operational checks and aborts to all projects using the Dataflash to ensure it is working correctly before use @@ -20,6 +22,16 @@ * - Audio Device Class driver changed to also require the index of the Audio Control interface within the device, for SET/GET/CUR/MIN/MAX/RES property adjustments * - Removed variable axis support from the HID_DESCRIPTOR_JOYSTICK() macro due to OS incompatibilities, replaced with fixed 3-axis joystick report structure * - Removed the old pseudo-scheduler from the library as it was unused and deprecated since the 090810 release + * - Endpoint indexes are now specified as full endpoint addresses within the device in device mode, rather than a logical index + * - The Endpoint_ConfigureEndpoint() function no longer takes an endpoint direction as a parameter, as this is now deduced from the specified full endpoint + * address and type + * - The Endpoint_ConfigureEndpoint() function no longer takes a number of banks as a special mask; the number of banks is now specified as an integer parameter + * - Endpoints are now configured via instances of a new struct USB_Endpoint_Table_t in all device mode class drivers, rather than a list of endpoint parameters + * - Pipe indexes are now specified as full pipe addresses within the host in host mode, rather than a logical index + * - The Pipe_ConfigurePipe() function no longer takes an pipe token as a parameter, as this is now deduced from the specified full pipe address and type + * - The Pipe_ConfigurePipe() function no longer takes a number of banks as a special mask; the number of banks is now specified as an integer parameter + * - Pipes are now configured via instances of a new struct USB_Pipe_Table_t in all host mode class drivers, rather than a list of pipe parameters + * - Added support for various assert and debugging macros for the UC3 devices * - Library Applications: * - Raised the guard bits in the AVRISP-MKII clone project when in PDI and TPI to 32, to prevent communication errors on low quality connections to a target * - Added additional bootloader API data to expose the bootloader start address and class to the DFU and CDC class bootloaders diff --git a/LUFA/DoxygenPages/DeviceSupport.txt b/LUFA/DoxygenPages/DeviceSupport.txt index c8083d275..214938fbb 100644 --- a/LUFA/DoxygenPages/DeviceSupport.txt +++ b/LUFA/DoxygenPages/DeviceSupport.txt @@ -377,6 +377,36 @@ * <td bgcolor="#00EE00">Yes</td> * <td bgcolor="#EE0000">No</td> * </tr> + * <tr> + * <td>ATXMEGA64C3</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA128C3</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA192C3</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA256C3</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA16C4</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> + * <tr> + * <td>ATXMEGA32C4</td> + * <td bgcolor="#00EE00">Yes</td> + * <td bgcolor="#EE0000">No</td> + * </tr> * </table> * * \section Sec_XMEGASupport_Boards Supported Atmel Boards diff --git a/LUFA/DoxygenPages/FutureChanges.txt b/LUFA/DoxygenPages/FutureChanges.txt index b75e94d7a..3e7a217b9 100644 --- a/LUFA/DoxygenPages/FutureChanges.txt +++ b/LUFA/DoxygenPages/FutureChanges.txt @@ -22,7 +22,6 @@ * -# Pull out third party libraries into a separate folder and reference them as required * -# Add a LUFA_YIELD macro for integration into a third-party RTOS * -# Abstract out Mass Storage byte send/receive to prevent low level API use in projects - * -# Consider switch from endpoint numbers to full endpoint addresses to ease future architecture expansion * -# Fix HID report parser usage support for array types * -# Make HOST_DEVICE_SETTLE_DELAY_MS a global variable that can be changed * -# Add MANDATORY_EVENT_FUNCTIONS compile time option diff --git a/LUFA/DoxygenPages/LUFAPoweredProjects.txt b/LUFA/DoxygenPages/LUFAPoweredProjects.txt index ea0870515..5179850e1 100644 --- a/LUFA/DoxygenPages/LUFAPoweredProjects.txt +++ b/LUFA/DoxygenPages/LUFAPoweredProjects.txt @@ -36,6 +36,7 @@ * The following are known hobbyist projects using LUFA. Most are open source, and show off interesting ways that the LUFA library * can be incorporated into many different applications. * + * \li Accelerometer Game Joystick: http://www.crictor.co.il/he/episodes/joystick/ * \li Arcade Controller: http://fletchtronics.net/arcade-controller-made-petunia * \li Arcade Joystick: http://jamie.lentin.co.uk/embedded/arcade-joystick/ * \li AttoBasic AVR BASIC interpreter: http://www.cappels.org/dproj/AttoBasic2_1/AttoBasic_2.1_with_USB_and_Arduino_support.html diff --git a/LUFA/DoxygenPages/MigrationInformation.txt b/LUFA/DoxygenPages/MigrationInformation.txt index 93082bb5c..fe0473284 100644 --- a/LUFA/DoxygenPages/MigrationInformation.txt +++ b/LUFA/DoxygenPages/MigrationInformation.txt @@ -17,10 +17,27 @@ * - The HID_DESCRIPTOR_JOYSTICK() macro no longer takes a variable number of axis as a parameter, due to OS incompatibilities; this macro now uses a fixed * 3 axis of data. User applications should update their calls to this macro and their report structures to suit a fixed 3-axis joystick report. If a user * application requires more than 3 axis' of data, a custom report descriptor will need to be constructed by hand. + * - The \ref Endpoint_ConfigureEndpoint() function no longer takes in masks for the banks and direction; the number of banks is now an integer argument, and + * the direction is obtained from the full endpoint address within the device. Applications calling Endpoint_ConfigureEndpoint() should update their API + * call to use a full endpoint address (including ENDPOINT_DIR_IN or ENDPOINT_DIR_OUT direction in the MSB of the endpoint address) and an integer number + * of banks. + * - All endpoint functions now operate on full endpoint addresses within the device, rather than a directionless endpoint index. Applications should update + * their API calls to use full endpoint addresses when required within the device. + * - All device mode class drivers have been updated to use a new unified endpoint description structure for all endpoints; existing applications will need + * to update their class driver struct instantiation to match the new scheme (see \ref USB_Endpoint_Table_t). + * - The \c ENDPOINT_BANKS_SUPPORTED() and \c ENDPOINT_MAX_ENDPOINT_SIZE() macros have been removed, as these do not function correctly with the new addressing + * scheme for the endpoint APIs. Please refer to the target device's datasheet for the maximum bank size of each endpoint. * * <b>Host Mode</b> * - The Android Accessory Host class driver property strings are now a array of \c char* rather than a struct of named pointers. Existing applications * should use C99 Designated Initializers with the property string indexes located in \ref AOA_Strings_t instead. + * - The \ref Pipe_ConfigurePipe() function no longer takes in masks for the banks and token; the number of banks is now an integer argument, and the token + * is now inferred from the full pipe address within the device, and the pipe type. Applications calling Pipe_ConfigurePipe() should update their API + * call to use a full pipe address (including PIPE_DIR_IN or PIPE_DIR_OUT direction in the MSB of the pipe address) and an integer number of banks. + * - All pipe functions now operate on full pipe addresses within the device, rather than a directionless pipe index. Applications should update their API + * calls to use full pipe addresses when required within the device. + * - All host mode class drivers have been updated to use a new unified pipe description structure for all pipes; existing applications will need to update + * their class driver struct instantiation to match the new scheme (see \ref USB_Pipe_Table_t). * * \section Sec_Migration120219 Migrating from 111009 to 120219 * <b>USB Core</b> @@ -130,7 +147,7 @@ * eliminate any casting of descriptor pointers to a non \c const pointer. * - The names of the class specific descriptor type defines in the USB Class drivers have changed - refer to the driver documentation * for each class driver for the new class specific descriptor type names. - * - The \c ENDPOINT_DOUBLEBANK_SUPPORTED() macro is has been renamed \ref ENDPOINT_BANKS_SUPPORTED() and now returns the total number of + * - The \c ENDPOINT_DOUBLEBANK_SUPPORTED() macro is has been renamed \c ENDPOINT_BANKS_SUPPORTED() and now returns the total number of * banks supported by the given endpoint. Existing code should switch to the new naming scheme, and test that the return value of the * macro is equal to or greater than 2 to regain the previous functionality. * - The \c EVENT_USB_Device_UnhandledControlRequest() event is now named \ref EVENT_USB_Device_ControlRequest() and fires before (not after) diff --git a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h index abc8d85d1..df357611b 100644 --- a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h +++ b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h @@ -71,10 +71,10 @@ #define DATAFLASH_TOTALCHIPS 1 /** Mask for no dataflash chip selected. */ - #define DATAFLASH_NO_CHIP DATAFLASH_CHIPCS_MASK + #define DATAFLASH_NO_CHIP 0 /** Mask for the first dataflash chip selected. */ - #define DATAFLASH_CHIP1 0 + #define DATAFLASH_CHIP1 (1 << 4) /** Internal main memory page size for the board's dataflash ICs. */ #define DATAFLASH_PAGE_SIZE 1024 @@ -88,8 +88,10 @@ */ static inline void Dataflash_Init(void) { - DATAFLASH_CHIPCS_PORT.DIRSET = DATAFLASH_CHIPCS_MASK; - DATAFLASH_CHIPCS_PORT.OUTSET = DATAFLASH_CHIPCS_MASK; + DATAFLASH_CHIPCS_PORT.DIRSET = DATAFLASH_CHIPCS_MASK; + + PORTCFG.MPCMASK = DATAFLASH_CHIPCS_MASK; + DATAFLASH_CHIPCS_PORT.PIN0CTRL = PORT_INVEN_bm; } /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash. @@ -143,7 +145,8 @@ static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE; static inline void Dataflash_SelectChip(const uint8_t ChipMask) { - DATAFLASH_CHIPCS_PORT.OUT = ((DATAFLASH_CHIPCS_PORT.OUT & ~DATAFLASH_CHIPCS_MASK) | ChipMask); + DATAFLASH_CHIPCS_PORT.OUTCLR = DATAFLASH_CHIPCS_MASK; + DATAFLASH_CHIPCS_PORT.OUTSET = ChipMask; } /** Deselects the current dataflash chip, so that no dataflash is selected. */ diff --git a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h index f1e6da5f0..0b8a2617e 100644 --- a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h +++ b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h @@ -71,10 +71,10 @@ #define DATAFLASH_TOTALCHIPS 1 /** Mask for no dataflash chip selected. */ - #define DATAFLASH_NO_CHIP DATAFLASH_CHIPCS_MASK + #define DATAFLASH_NO_CHIP 0 /** Mask for the first dataflash chip selected. */ - #define DATAFLASH_CHIP1 0 + #define DATAFLASH_CHIP1 (1 << 2) /** Internal main memory page size for the board's dataflash ICs. */ #define DATAFLASH_PAGE_SIZE 1024 @@ -88,10 +88,12 @@ */ static inline void Dataflash_Init(void) { - DATAFLASH_CHIPCS_PORT.DIRSET = DATAFLASH_CHIPCS_MASK; - DATAFLASH_CHIPCS_PORT.OUTSET = DATAFLASH_CHIPCS_MASK; + DATAFLASH_CHIPCS_PORT.DIRSET = DATAFLASH_CHIPCS_MASK; - PORTE.REMAP |= PORT_USART0_bm; + PORTCFG.MPCMASK = DATAFLASH_CHIPCS_MASK; + DATAFLASH_CHIPCS_PORT.PIN0CTRL = PORT_INVEN_bm; + + PORTC.REMAP |= PORT_USART0_bm; } /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash. @@ -103,7 +105,7 @@ static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) { - return SerialSPI_TransferByte(&USARTE0, Byte); + return SerialSPI_TransferByte(&USARTC0, Byte); } /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash. @@ -113,7 +115,7 @@ static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; static inline void Dataflash_SendByte(const uint8_t Byte) { - SerialSPI_SendByte(&USARTE0, Byte); + SerialSPI_SendByte(&USARTC0, Byte); } /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash. @@ -123,7 +125,7 @@ static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; static inline uint8_t Dataflash_ReceiveByte(void) { - return SerialSPI_ReceiveByte(&USARTE0); + return SerialSPI_ReceiveByte(&USARTC0); } /** Determines the currently selected dataflash chip. @@ -145,7 +147,8 @@ static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE; static inline void Dataflash_SelectChip(const uint8_t ChipMask) { - DATAFLASH_CHIPCS_PORT.OUT = ((DATAFLASH_CHIPCS_PORT.OUT & ~DATAFLASH_CHIPCS_MASK) | ChipMask); + DATAFLASH_CHIPCS_PORT.OUTCLR = DATAFLASH_CHIPCS_MASK; + DATAFLASH_CHIPCS_PORT.OUTSET = (ChipMask & DATAFLASH_CHIPCS_MASK); } /** Deselects the current dataflash chip, so that no dataflash is selected. */ diff --git a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h index 0126630ac..562aaecfd 100644 --- a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h +++ b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h @@ -176,9 +176,7 @@ */ static inline void SerialSPI_SendByte(const uint8_t DataByte) { - UDR1 = DataByte; - while (!(UCSR1A & (1 << TXC1))); - UCSR1A = (1 << TXC1); + SerialSPI_TransferByte(DataByte); } /** Sends a dummy byte through the USART SPI interface, blocking until the transfer is complete. The response @@ -188,10 +186,7 @@ */ static inline uint8_t SerialSPI_ReceiveByte(void) { - UDR1 = 0; - while (!(UCSR1A & (1 << TXC1))); - UCSR1A = (1 << TXC1); - return UDR1; + return SerialSPI_TransferByte(0); } /* Disable C linkage for C++ Compilers: */ diff --git a/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h b/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h index 6f8251f60..a0e9e3370 100644 --- a/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h +++ b/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h @@ -52,7 +52,7 @@ * * \code * // Initialize the Master SPI mode USART driver before first use, with 1Mbit baud - * SerialSPI_Init(&USARTD0, (USART_SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_ORDER_MSB_FIRST), 1000000); + * SerialSPI_Init(&USARTD0, (USART_SPI_SCK_LEAD_RISING | USART_SPI_SAMPLE_LEADING | USART_SPI_ORDER_MSB_FIRST), 1000000); * * // Send several bytes, ignoring the returned data * SerialSPI_SendByte(&USARTD0, 0x01); @@ -177,9 +177,7 @@ static inline void SerialSPI_SendByte(USART_t* const USART, const uint8_t DataByte) { - USART->DATA = DataByte; - while (!(USART->STATUS & USART_TXCIF_bm)); - USART->STATUS = USART_TXCIF_bm; + SerialSPI_TransferByte(USART, DataByte); } /** Sends a dummy byte through the USART SPI interface, blocking until the transfer is complete. The response @@ -191,10 +189,7 @@ */ static inline uint8_t SerialSPI_ReceiveByte(USART_t* const USART) { - USART->DATA = 0; - while (!(USART->STATUS & USART_TXCIF_bm)); - USART->STATUS = USART_TXCIF_bm; - return USART->DATA; + return SerialSPI_TransferByte(USART, 0); } /* Disable C linkage for C++ Compilers: */ diff --git a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.c b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.c index 15fcd588d..ad79e9b2b 100644 --- a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.c +++ b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.c @@ -48,15 +48,16 @@ void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const Audi if ((InterfaceIndex != AudioInterfaceInfo->Config.ControlInterfaceNumber) && (InterfaceIndex != AudioInterfaceInfo->Config.StreamingInterfaceNumber)) - - return; + { + return; + } } else if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_ENDPOINT) { - uint8_t EndpointIndex = (USB_ControlRequest.wIndex & 0xFF); + uint8_t EndpointAddress = (USB_ControlRequest.wIndex & 0xFF); - if ((EndpointIndex != (ENDPOINT_DIR_IN | AudioInterfaceInfo->Config.DataINEndpointNumber)) && - (EndpointIndex != (ENDPOINT_DIR_OUT | AudioInterfaceInfo->Config.DataOUTEndpointNumber))) + if ((EndpointAddress != AudioInterfaceInfo->Config.DataINEndpoint.Address) && + (EndpointAddress != AudioInterfaceInfo->Config.DataOUTEndpoint.Address)) { return; } @@ -88,7 +89,7 @@ void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const Audi case AUDIO_REQ_SetMinimum: case AUDIO_REQ_SetMaximum: case AUDIO_REQ_SetResolution: - if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT)) + if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_ENDPOINT) { uint8_t EndpointProperty = USB_ControlRequest.bRequest; uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex; @@ -108,7 +109,7 @@ void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const Audi EndpointControl, &ValueLength, Value); } } - else if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) + else if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_INTERFACE) { uint8_t Property = USB_ControlRequest.bRequest; uint8_t Entity = (USB_ControlRequest.wIndex >> 8); @@ -134,7 +135,7 @@ void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const Audi case AUDIO_REQ_GetMinimum: case AUDIO_REQ_GetMaximum: case AUDIO_REQ_GetResolution: - if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT)) + if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_ENDPOINT) { uint8_t EndpointProperty = USB_ControlRequest.bRequest; uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex; @@ -150,7 +151,7 @@ void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const Audi Endpoint_ClearOUT(); } } - else if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) + else if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_INTERFACE) { uint8_t Property = USB_ControlRequest.bRequest; uint8_t Entity = (USB_ControlRequest.wIndex >> 8); @@ -174,39 +175,15 @@ void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const Audi bool Audio_Device_ConfigureEndpoints(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo) { memset(&AudioInterfaceInfo->State, 0x00, sizeof(AudioInterfaceInfo->State)); + + AudioInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_ISOCHRONOUS; + AudioInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_ISOCHRONOUS; - for (uint8_t EndpointNum = 1; EndpointNum < ENDPOINT_TOTAL_ENDPOINTS; EndpointNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Direction; - bool DoubleBanked; + if (!(Endpoint_ConfigureEndpointTable(&AudioInterfaceInfo->Config.DataINEndpoint, 1))) + return false; - if (EndpointNum == AudioInterfaceInfo->Config.DataINEndpointNumber) - { - Size = AudioInterfaceInfo->Config.DataINEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_ISOCHRONOUS; - DoubleBanked = true; - } - else if (EndpointNum == AudioInterfaceInfo->Config.DataOUTEndpointNumber) - { - Size = AudioInterfaceInfo->Config.DataOUTEndpointSize; - Direction = ENDPOINT_DIR_OUT; - Type = EP_TYPE_ISOCHRONOUS; - DoubleBanked = true; - } - else - { - continue; - } - - if (!(Endpoint_ConfigureEndpoint(EndpointNum, Type, Direction, Size, - DoubleBanked ? ENDPOINT_BANK_DOUBLE : ENDPOINT_BANK_SINGLE))) - { - return false; - } - } + if (!(Endpoint_ConfigureEndpointTable(&AudioInterfaceInfo->Config.DataOUTEndpoint, 1))) + return false; return true; } diff --git a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h index 239126607..a8bfc7833 100644 --- a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h @@ -86,19 +86,8 @@ * structure controls. */ - uint8_t DataINEndpointNumber; /**< Endpoint number of the incoming Audio Streaming data, if available - * (zero if unused). - */ - uint16_t DataINEndpointSize; /**< Size in bytes of the incoming Audio Streaming data endpoint, if available - * (zero if unused). - */ - - uint8_t DataOUTEndpointNumber; /**< Endpoint number of the outgoing Audio Streaming data, if available - * (zero if unused). - */ - uint16_t DataOUTEndpointSize; /**< Size in bytes of the outgoing Audio Streaming data endpoint, if available - * (zero if unused). - */ + USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */ + USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * <b>must</b> be set or the interface will fail to enumerate and operate correctly. */ @@ -226,7 +215,7 @@ if ((USB_DeviceState != DEVICE_STATE_Configured) || !(AudioInterfaceInfo->State.InterfaceEnabled)) return false; - Endpoint_SelectEndpoint(AudioInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(AudioInterfaceInfo->Config.DataOUTEndpoint.Address); return Endpoint_IsOUTReceived(); } @@ -247,7 +236,7 @@ if ((USB_DeviceState != DEVICE_STATE_Configured) || !(AudioInterfaceInfo->State.InterfaceEnabled)) return false; - Endpoint_SelectEndpoint(AudioInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(AudioInterfaceInfo->Config.DataINEndpoint.Address); return Endpoint_IsINReady(); } @@ -341,7 +330,7 @@ { Endpoint_Write_8(Sample); - if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpointSize) + if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpoint.Size) Endpoint_ClearIN(); } @@ -360,7 +349,7 @@ { Endpoint_Write_16_LE(Sample); - if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpointSize) + if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpoint.Size) Endpoint_ClearIN(); } @@ -380,7 +369,7 @@ Endpoint_Write_16_LE(Sample); Endpoint_Write_8(Sample >> 16); - if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpointSize) + if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpoint.Size) Endpoint_ClearIN(); } diff --git a/LUFA/Drivers/USB/Class/Device/CDCClassDevice.c b/LUFA/Drivers/USB/Class/Device/CDCClassDevice.c index 5b5343860..a16949cfd 100644 --- a/LUFA/Drivers/USB/Class/Device/CDCClassDevice.c +++ b/LUFA/Drivers/USB/Class/Device/CDCClassDevice.c @@ -112,45 +112,18 @@ bool CDC_Device_ConfigureEndpoints(USB_ClassInfo_CDC_Device_t* const CDCInterfac { memset(&CDCInterfaceInfo->State, 0x00, sizeof(CDCInterfaceInfo->State)); - for (uint8_t EndpointNum = 1; EndpointNum < ENDPOINT_TOTAL_ENDPOINTS; EndpointNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Direction; - bool DoubleBanked; + CDCInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_BULK; + CDCInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_BULK; + CDCInterfaceInfo->Config.NotificationEndpoint.Type = EP_TYPE_INTERRUPT; - if (EndpointNum == CDCInterfaceInfo->Config.DataINEndpointNumber) - { - Size = CDCInterfaceInfo->Config.DataINEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_BULK; - DoubleBanked = CDCInterfaceInfo->Config.DataINEndpointDoubleBank; - } - else if (EndpointNum == CDCInterfaceInfo->Config.DataOUTEndpointNumber) - { - Size = CDCInterfaceInfo->Config.DataOUTEndpointSize; - Direction = ENDPOINT_DIR_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = CDCInterfaceInfo->Config.DataOUTEndpointDoubleBank; - } - else if (EndpointNum == CDCInterfaceInfo->Config.NotificationEndpointNumber) - { - Size = CDCInterfaceInfo->Config.NotificationEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = CDCInterfaceInfo->Config.NotificationEndpointDoubleBank; - } - else - { - continue; - } + if (!(Endpoint_ConfigureEndpointTable(&CDCInterfaceInfo->Config.DataINEndpoint, 1))) + return false; - if (!(Endpoint_ConfigureEndpoint(EndpointNum, Type, Direction, Size, - DoubleBanked ? ENDPOINT_BANK_DOUBLE : ENDPOINT_BANK_SINGLE))) - { - return false; - } - } + if (!(Endpoint_ConfigureEndpointTable(&CDCInterfaceInfo->Config.DataOUTEndpoint, 1))) + return false; + + if (!(Endpoint_ConfigureEndpointTable(&CDCInterfaceInfo->Config.NotificationEndpoint, 1))) + return false; return true; } @@ -171,7 +144,7 @@ uint8_t CDC_Device_SendString(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS)) return ENDPOINT_RWSTREAM_DeviceDisconnected; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address); return Endpoint_Write_Stream_LE(String, strlen(String), NULL); } @@ -182,7 +155,7 @@ uint8_t CDC_Device_SendData(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo, if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS)) return ENDPOINT_RWSTREAM_DeviceDisconnected; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address); return Endpoint_Write_Stream_LE(Buffer, Length, NULL); } @@ -192,7 +165,7 @@ uint8_t CDC_Device_SendByte(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo, if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS)) return ENDPOINT_RWSTREAM_DeviceDisconnected; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address); if (!(Endpoint_IsReadWriteAllowed())) { @@ -215,7 +188,7 @@ uint8_t CDC_Device_Flush(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) uint8_t ErrorCode; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address); if (!(Endpoint_BytesInEndpoint())) return ENDPOINT_READYWAIT_NoError; @@ -240,7 +213,7 @@ uint16_t CDC_Device_BytesReceived(USB_ClassInfo_CDC_Device_t* const CDCInterface if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS)) return 0; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataOUTEndpoint.Address); if (Endpoint_IsOUTReceived()) { @@ -267,7 +240,7 @@ int16_t CDC_Device_ReceiveByte(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInf int16_t ReceivedByte = -1; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataOUTEndpoint.Address); if (Endpoint_IsOUTReceived()) { @@ -286,7 +259,7 @@ void CDC_Device_SendControlLineStateChange(USB_ClassInfo_CDC_Device_t* const CDC if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS)) return; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.NotificationEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.NotificationEndpoint.Address); USB_Request_Header_t Notification = (USB_Request_Header_t) { diff --git a/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h b/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h index cc0dd1b15..508c234d7 100644 --- a/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h @@ -99,19 +99,11 @@ { struct { - uint8_t ControlInterfaceNumber; /**< Interface number of the CDC control interface within the device. */ - - uint8_t DataINEndpointNumber; /**< Endpoint number of the CDC interface's IN data endpoint. */ - uint16_t DataINEndpointSize; /**< Size in bytes of the CDC interface's IN data endpoint. */ - bool DataINEndpointDoubleBank; /**< Indicates if the CDC interface's IN data endpoint should use double banking. */ - - uint8_t DataOUTEndpointNumber; /**< Endpoint number of the CDC interface's OUT data endpoint. */ - uint16_t DataOUTEndpointSize; /**< Size in bytes of the CDC interface's OUT data endpoint. */ - bool DataOUTEndpointDoubleBank; /**< Indicates if the CDC interface's OUT data endpoint should use double banking. */ - - uint8_t NotificationEndpointNumber; /**< Endpoint number of the CDC interface's IN notification endpoint, if used. */ - uint16_t NotificationEndpointSize; /**< Size in bytes of the CDC interface's IN notification endpoint, if used. */ - bool NotificationEndpointDoubleBank; /**< Indicates if the CDC interface's notification endpoint should use double banking. */ + uint8_t ControlInterfaceNumber; /**< Interface number of the CDC control interface within the device. */ + + USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */ + USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */ + USB_Endpoint_Table_t NotificationEndpoint; /**< Notification IN Endpoint configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * <b>must</b> be set or the interface will fail to enumerate and operate correctly. */ diff --git a/LUFA/Drivers/USB/Class/Device/HIDClassDevice.c b/LUFA/Drivers/USB/Class/Device/HIDClassDevice.c index 5c8d878e7..e4b565327 100644 --- a/LUFA/Drivers/USB/Class/Device/HIDClassDevice.c +++ b/LUFA/Drivers/USB/Class/Device/HIDClassDevice.c @@ -141,13 +141,11 @@ bool HID_Device_ConfigureEndpoints(USB_ClassInfo_HID_Device_t* const HIDInterfac HIDInterfaceInfo->State.UsingReportProtocol = true; HIDInterfaceInfo->State.IdleCount = 500; - if (!(Endpoint_ConfigureEndpoint(HIDInterfaceInfo->Config.ReportINEndpointNumber, EP_TYPE_INTERRUPT, - ENDPOINT_DIR_IN, HIDInterfaceInfo->Config.ReportINEndpointSize, - HIDInterfaceInfo->Config.ReportINEndpointDoubleBank ? ENDPOINT_BANK_DOUBLE : ENDPOINT_BANK_SINGLE))) - { - return false; - } + HIDInterfaceInfo->Config.ReportINEndpoint.Type = EP_TYPE_INTERRUPT; + if (!(Endpoint_ConfigureEndpointTable(&HIDInterfaceInfo->Config.ReportINEndpoint, 1))) + return false; + return true; } @@ -159,7 +157,7 @@ void HID_Device_USBTask(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo) if (HIDInterfaceInfo->State.PrevFrameNum == USB_Device_GetFrameNumber()) return; - Endpoint_SelectEndpoint(HIDInterfaceInfo->Config.ReportINEndpointNumber); + Endpoint_SelectEndpoint(HIDInterfaceInfo->Config.ReportINEndpoint.Address); if (Endpoint_IsReadWriteAllowed()) { @@ -184,7 +182,7 @@ void HID_Device_USBTask(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo) { HIDInterfaceInfo->State.IdleMSRemaining = HIDInterfaceInfo->State.IdleCount; - Endpoint_SelectEndpoint(HIDInterfaceInfo->Config.ReportINEndpointNumber); + Endpoint_SelectEndpoint(HIDInterfaceInfo->Config.ReportINEndpoint.Address); if (ReportID) Endpoint_Write_8(ReportID); diff --git a/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h b/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h index a6361c6b0..e358dec75 100644 --- a/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h @@ -85,9 +85,7 @@ { uint8_t InterfaceNumber; /**< Interface number of the HID interface within the device. */ - uint8_t ReportINEndpointNumber; /**< Endpoint number of the HID interface's IN report endpoint. */ - uint16_t ReportINEndpointSize; /**< Size in bytes of the HID interface's IN report endpoint. */ - bool ReportINEndpointDoubleBank; /**< Indicates if the HID interface's IN report endpoint should use double banking. */ + USB_Endpoint_Table_t ReportINEndpoint; /**< Data IN HID report endpoint configuration table. */ void* PrevReportINBuffer; /**< Pointer to a buffer where the previously created HID input report can be * stored by the driver, for comparison purposes to detect report changes that diff --git a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c index 9f0506e56..c9553a413 100644 --- a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c +++ b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c @@ -41,38 +41,14 @@ bool MIDI_Device_ConfigureEndpoints(USB_ClassInfo_MIDI_Device_t* const MIDIInter { memset(&MIDIInterfaceInfo->State, 0x00, sizeof(MIDIInterfaceInfo->State)); - for (uint8_t EndpointNum = 1; EndpointNum < ENDPOINT_TOTAL_ENDPOINTS; EndpointNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Direction; - bool DoubleBanked; - - if (EndpointNum == MIDIInterfaceInfo->Config.DataINEndpointNumber) - { - Size = MIDIInterfaceInfo->Config.DataINEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_BULK; - DoubleBanked = MIDIInterfaceInfo->Config.DataINEndpointDoubleBank; - } - else if (EndpointNum == MIDIInterfaceInfo->Config.DataOUTEndpointNumber) - { - Size = MIDIInterfaceInfo->Config.DataOUTEndpointSize; - Direction = ENDPOINT_DIR_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = MIDIInterfaceInfo->Config.DataOUTEndpointDoubleBank; - } - else - { - continue; - } - - if (!(Endpoint_ConfigureEndpoint(EndpointNum, Type, Direction, Size, - DoubleBanked ? ENDPOINT_BANK_DOUBLE : ENDPOINT_BANK_SINGLE))) - { - return false; - } - } + MIDIInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_BULK; + MIDIInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_BULK; + + if (!(Endpoint_ConfigureEndpointTable(&MIDIInterfaceInfo->Config.DataINEndpoint, 1))) + return false; + + if (!(Endpoint_ConfigureEndpointTable(&MIDIInterfaceInfo->Config.DataOUTEndpoint, 1))) + return false; return true; } @@ -95,7 +71,7 @@ uint8_t MIDI_Device_SendEventPacket(USB_ClassInfo_MIDI_Device_t* const MIDIInter uint8_t ErrorCode; - Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataINEndpoint.Address); if ((ErrorCode = Endpoint_Write_Stream_LE(Event, sizeof(MIDI_EventPacket_t), NULL)) != ENDPOINT_RWSTREAM_NoError) return ErrorCode; @@ -113,7 +89,7 @@ uint8_t MIDI_Device_Flush(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo) uint8_t ErrorCode; - Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataINEndpoint.Address); if (Endpoint_BytesInEndpoint()) { @@ -132,7 +108,7 @@ bool MIDI_Device_ReceiveEventPacket(USB_ClassInfo_MIDI_Device_t* const MIDIInter if (USB_DeviceState != DEVICE_STATE_Configured) return false; - Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataOUTEndpoint.Address); if (!(Endpoint_IsReadWriteAllowed())) return false; diff --git a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h index 4fe49af1f..2703600ea 100644 --- a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h @@ -81,13 +81,8 @@ { uint8_t StreamingInterfaceNumber; /**< Index of the Audio Streaming interface within the device this structure controls. */ - uint8_t DataINEndpointNumber; /**< Endpoint number of the incoming MIDI IN data, if available (zero if unused). */ - uint16_t DataINEndpointSize; /**< Size in bytes of the incoming MIDI IN data endpoint, if available (zero if unused). */ - bool DataINEndpointDoubleBank; /**< Indicates if the MIDI interface's IN data endpoint should use double banking. */ - - uint8_t DataOUTEndpointNumber; /**< Endpoint number of the outgoing MIDI OUT data, if available (zero if unused). */ - uint16_t DataOUTEndpointSize; /**< Size in bytes of the outgoing MIDI OUT data endpoint, if available (zero if unused). */ - bool DataOUTEndpointDoubleBank; /**< Indicates if the MIDI interface's OUT data endpoint should use double banking. */ + USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */ + USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * <b>must</b> be set or the interface will fail to enumerate and operate correctly. */ diff --git a/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c b/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c index 6294a0a94..153ebbc89 100644 --- a/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c +++ b/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c @@ -75,38 +75,14 @@ bool MS_Device_ConfigureEndpoints(USB_ClassInfo_MS_Device_t* const MSInterfaceIn { memset(&MSInterfaceInfo->State, 0x00, sizeof(MSInterfaceInfo->State)); - for (uint8_t EndpointNum = 1; EndpointNum < ENDPOINT_TOTAL_ENDPOINTS; EndpointNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Direction; - bool DoubleBanked; + MSInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_BULK; + MSInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_BULK; - if (EndpointNum == MSInterfaceInfo->Config.DataINEndpointNumber) - { - Size = MSInterfaceInfo->Config.DataINEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_BULK; - DoubleBanked = MSInterfaceInfo->Config.DataINEndpointDoubleBank; - } - else if (EndpointNum == MSInterfaceInfo->Config.DataOUTEndpointNumber) - { - Size = MSInterfaceInfo->Config.DataOUTEndpointSize; - Direction = ENDPOINT_DIR_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = MSInterfaceInfo->Config.DataOUTEndpointDoubleBank; - } - else - { - continue; - } + if (!(Endpoint_ConfigureEndpointTable(&MSInterfaceInfo->Config.DataINEndpoint, 1))) + return false; - if (!(Endpoint_ConfigureEndpoint(EndpointNum, Type, Direction, Size, - DoubleBanked ? ENDPOINT_BANK_DOUBLE : ENDPOINT_BANK_SINGLE))) - { - return false; - } - } + if (!(Endpoint_ConfigureEndpointTable(&MSInterfaceInfo->Config.DataOUTEndpoint, 1))) + return false; return true; } @@ -116,14 +92,14 @@ void MS_Device_USBTask(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) if (USB_DeviceState != DEVICE_STATE_Configured) return; - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address); - if (Endpoint_IsReadWriteAllowed()) + if (Endpoint_IsOUTReceived()) { if (MS_Device_ReadInCommandBlock(MSInterfaceInfo)) { if (MSInterfaceInfo->State.CommandBlock.Flags & MS_COMMAND_DIR_DATA_IN) - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address); bool SCSICommandResult = CALLBACK_MS_Device_SCSICommandReceived(MSInterfaceInfo); @@ -141,13 +117,13 @@ void MS_Device_USBTask(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) if (MSInterfaceInfo->State.IsMassStoreReset) { - Endpoint_ResetEndpoint(MSInterfaceInfo->Config.DataOUTEndpointNumber); - Endpoint_ResetEndpoint(MSInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_ResetEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address); + Endpoint_ResetEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address); - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address); Endpoint_ClearStall(); Endpoint_ResetDataToggle(); - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address); Endpoint_ClearStall(); Endpoint_ResetDataToggle(); @@ -159,8 +135,8 @@ static bool MS_Device_ReadInCommandBlock(USB_ClassInfo_MS_Device_t* const MSInte { uint16_t BytesProcessed; - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpointNumber); - + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address); + BytesProcessed = 0; while (Endpoint_Read_Stream_LE(&MSInterfaceInfo->State.CommandBlock, (sizeof(MS_CommandBlockWrapper_t) - 16), &BytesProcessed) == @@ -175,9 +151,9 @@ static bool MS_Device_ReadInCommandBlock(USB_ClassInfo_MS_Device_t* const MSInte (MSInterfaceInfo->State.CommandBlock.Flags & 0x1F) || (MSInterfaceInfo->State.CommandBlock.SCSICommandLength == 0) || (MSInterfaceInfo->State.CommandBlock.SCSICommandLength > 16)) - { + { Endpoint_StallTransaction(); - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address); Endpoint_StallTransaction(); return false; @@ -199,7 +175,7 @@ static bool MS_Device_ReadInCommandBlock(USB_ClassInfo_MS_Device_t* const MSInte static void MS_Device_ReturnCommandStatus(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) { - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address); while (Endpoint_IsStalled()) { @@ -211,7 +187,7 @@ static void MS_Device_ReturnCommandStatus(USB_ClassInfo_MS_Device_t* const MSInt return; } - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address); while (Endpoint_IsStalled()) { diff --git a/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h b/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h index c2d536ce2..6b490eca1 100644 --- a/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h @@ -81,13 +81,8 @@ { uint8_t InterfaceNumber; /**< Interface number of the Mass Storage interface within the device. */ - uint8_t DataINEndpointNumber; /**< Endpoint number of the Mass Storage interface's IN data endpoint. */ - uint16_t DataINEndpointSize; /**< Size in bytes of the Mass Storage interface's IN data endpoint. */ - bool DataINEndpointDoubleBank; /**< Indicates if the Mass Storage interface's IN data endpoint should use double banking. */ - - uint8_t DataOUTEndpointNumber; /**< Endpoint number of the Mass Storage interface's OUT data endpoint. */ - uint16_t DataOUTEndpointSize; /**< Size in bytes of the Mass Storage interface's OUT data endpoint. */ - bool DataOUTEndpointDoubleBank; /**< Indicates if the Mass Storage interface's OUT data endpoint should use double banking. */ + USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */ + USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */ uint8_t TotalLUNs; /**< Total number of logical drives in the Mass Storage interface. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section diff --git a/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c b/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c index f78a5abf2..e5aa40cd0 100644 --- a/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c +++ b/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c @@ -115,45 +115,18 @@ bool RNDIS_Device_ConfigureEndpoints(USB_ClassInfo_RNDIS_Device_t* const RNDISIn { memset(&RNDISInterfaceInfo->State, 0x00, sizeof(RNDISInterfaceInfo->State)); - for (uint8_t EndpointNum = 1; EndpointNum < ENDPOINT_TOTAL_ENDPOINTS; EndpointNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Direction; - bool DoubleBanked; - - if (EndpointNum == RNDISInterfaceInfo->Config.DataINEndpointNumber) - { - Size = RNDISInterfaceInfo->Config.DataINEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_BULK; - DoubleBanked = RNDISInterfaceInfo->Config.DataINEndpointDoubleBank; - } - else if (EndpointNum == RNDISInterfaceInfo->Config.DataOUTEndpointNumber) - { - Size = RNDISInterfaceInfo->Config.DataOUTEndpointSize; - Direction = ENDPOINT_DIR_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = RNDISInterfaceInfo->Config.DataOUTEndpointDoubleBank; - } - else if (EndpointNum == RNDISInterfaceInfo->Config.NotificationEndpointNumber) - { - Size = RNDISInterfaceInfo->Config.NotificationEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = RNDISInterfaceInfo->Config.NotificationEndpointDoubleBank; - } - else - { - continue; - } - - if (!(Endpoint_ConfigureEndpoint(EndpointNum, Type, Direction, Size, - DoubleBanked ? ENDPOINT_BANK_DOUBLE : ENDPOINT_BANK_SINGLE))) - { - return false; - } - } + RNDISInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_BULK; + RNDISInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_BULK; + RNDISInterfaceInfo->Config.NotificationEndpoint.Type = EP_TYPE_INTERRUPT; + + if (!(Endpoint_ConfigureEndpointTable(&RNDISInterfaceInfo->Config.DataINEndpoint, 1))) + return false; + + if (!(Endpoint_ConfigureEndpointTable(&RNDISInterfaceInfo->Config.DataOUTEndpoint, 1))) + return false; + + if (!(Endpoint_ConfigureEndpointTable(&RNDISInterfaceInfo->Config.NotificationEndpoint, 1))) + return false; return true; } @@ -163,7 +136,7 @@ void RNDIS_Device_USBTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo if (USB_DeviceState != DEVICE_STATE_Configured) return; - Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.NotificationEndpointNumber); + Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.NotificationEndpoint.Address); if (Endpoint_IsINReady() && RNDISInterfaceInfo->State.ResponseReady) { @@ -454,7 +427,7 @@ bool RNDIS_Device_IsPacketReceived(USB_ClassInfo_RNDIS_Device_t* const RNDISInte return false; } - Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataOUTEndpoint.Address); return Endpoint_IsOUTReceived(); } @@ -468,7 +441,7 @@ uint8_t RNDIS_Device_ReadPacket(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfa return ENDPOINT_RWSTREAM_DeviceDisconnected; } - Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataOUTEndpoint.Address); *PacketLength = 0; @@ -505,7 +478,7 @@ uint8_t RNDIS_Device_SendPacket(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfa return ENDPOINT_RWSTREAM_DeviceDisconnected; } - Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataINEndpoint.Address); if ((ErrorCode = Endpoint_WaitUntilReady()) != ENDPOINT_READYWAIT_NoError) return ErrorCode; diff --git a/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h b/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h index ccd20e38e..33b807da9 100644 --- a/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h @@ -81,17 +81,9 @@ { uint8_t ControlInterfaceNumber; /**< Interface number of the RNDIS control interface within the device. */ - uint8_t DataINEndpointNumber; /**< Endpoint number of the RNDIS interface's IN data endpoint. */ - uint16_t DataINEndpointSize; /**< Size in bytes of the RNDIS interface's IN data endpoint. */ - bool DataINEndpointDoubleBank; /**< Indicates if the RNDIS interface's IN data endpoint should use double banking. */ - - uint8_t DataOUTEndpointNumber; /**< Endpoint number of the RNDIS interface's OUT data endpoint. */ - uint16_t DataOUTEndpointSize; /**< Size in bytes of the RNDIS interface's OUT data endpoint. */ - bool DataOUTEndpointDoubleBank; /**< Indicates if the RNDIS interface's OUT data endpoint should use double banking. */ - - uint8_t NotificationEndpointNumber; /**< Endpoint number of the RNDIS interface's IN notification endpoint, if used. */ - uint16_t NotificationEndpointSize; /**< Size in bytes of the RNDIS interface's IN notification endpoint, if used. */ - bool NotificationEndpointDoubleBank; /**< Indicates if the RNDIS interface's notification endpoint should use double banking. */ + USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */ + USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */ + USB_Endpoint_Table_t NotificationEndpoint; /**< Notification IN Endpoint configuration table. */ char* AdapterVendorDescription; /**< String description of the adapter vendor. */ MAC_Address_t AdapterMACAddress; /**< MAC address of the adapter. */ diff --git a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c index eb4c2530d..7c564e012 100644 --- a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c @@ -89,45 +89,19 @@ uint8_t AOA_Host_ConfigurePipes(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo DataOUTEndpoint = EndpointData;
}
- for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++)
- {
- uint16_t Size;
- uint8_t Type;
- uint8_t Token;
- uint8_t EndpointAddress;
- bool DoubleBanked;
-
- if (PipeNum == AOAInterfaceInfo->Config.DataINPipeNumber)
- {
- Size = le16_to_cpu(DataINEndpoint->EndpointSize);
- EndpointAddress = DataINEndpoint->EndpointAddress;
- Token = PIPE_TOKEN_IN;
- Type = EP_TYPE_BULK;
- DoubleBanked = AOAInterfaceInfo->Config.DataINPipeDoubleBank;
-
- AOAInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize;
- }
- else if (PipeNum == AOAInterfaceInfo->Config.DataOUTPipeNumber)
- {
- Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
- EndpointAddress = DataOUTEndpoint->EndpointAddress;
- Token = PIPE_TOKEN_OUT;
- Type = EP_TYPE_BULK;
- DoubleBanked = AOAInterfaceInfo->Config.DataOUTPipeDoubleBank;
-
- AOAInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize;
- }
- else
- {
- continue;
- }
-
- if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size,
- DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE)))
- {
- return AOA_ENUMERROR_PipeConfigurationFailed;
- }
- }
+ AOAInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
+ AOAInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
+ AOAInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK;
+
+ AOAInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
+ AOAInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
+ AOAInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK;
+
+ if (!(Pipe_ConfigurePipeTable(&AOAInterfaceInfo->Config.DataINPipe, 1)))
+ return false;
+
+ if (!(Pipe_ConfigurePipeTable(&AOAInterfaceInfo->Config.DataOUTPipe, 1)))
+ return false;
AOAInterfaceInfo->State.IsActive = true;
AOAInterfaceInfo->State.InterfaceNumber = AOAInterface->InterfaceNumber;
@@ -260,7 +234,7 @@ uint8_t AOA_Host_SendData(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, uint8_t ErrorCode;
- Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipeNumber);
+ Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipe.Address);
Pipe_Unfreeze();
ErrorCode = Pipe_Write_Stream_LE(Buffer, Length, NULL);
@@ -277,7 +251,7 @@ uint8_t AOA_Host_SendString(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, uint8_t ErrorCode;
- Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipeNumber);
+ Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipe.Address);
Pipe_Unfreeze();
ErrorCode = Pipe_Write_Stream_LE(String, strlen(String), NULL);
@@ -294,7 +268,7 @@ uint8_t AOA_Host_SendByte(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, uint8_t ErrorCode;
- Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipeNumber);
+ Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipe.Address);
Pipe_Unfreeze();
if (!(Pipe_IsReadWriteAllowed()))
@@ -316,7 +290,7 @@ uint16_t AOA_Host_BytesReceived(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive))
return 0;
- Pipe_SelectPipe(AOAInterfaceInfo->Config.DataINPipeNumber);
+ Pipe_SelectPipe(AOAInterfaceInfo->Config.DataINPipe.Address);
Pipe_Unfreeze();
if (Pipe_IsINReceived())
@@ -348,7 +322,7 @@ int16_t AOA_Host_ReceiveByte(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) int16_t ReceivedByte = -1;
- Pipe_SelectPipe(AOAInterfaceInfo->Config.DataINPipeNumber);
+ Pipe_SelectPipe(AOAInterfaceInfo->Config.DataINPipe.Address);
Pipe_Unfreeze();
if (Pipe_IsINReceived())
@@ -372,7 +346,7 @@ uint8_t AOA_Host_Flush(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) uint8_t ErrorCode;
- Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipeNumber);
+ Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipe.Address);
Pipe_Unfreeze();
if (!(Pipe_BytesInPipe()))
diff --git a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h index 0ec44e715..678feda45 100644 --- a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h @@ -85,11 +85,8 @@ {
struct
{
- uint8_t DataINPipeNumber; /**< Pipe number of the AOA interface's IN data pipe. */
- bool DataINPipeDoubleBank; /**< Indicates if the AOA interface's IN data pipe should use double banking. */
-
- uint8_t DataOUTPipeNumber; /**< Pipe number of the AOA interface's OUT data pipe. */
- bool DataOUTPipeDoubleBank; /**< Indicates if the AOA interface's OUT data pipe should use double banking. */
+ USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */
+ USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */
char* PropertyStrings[AOA_STRING_TOTAL_STRINGS]; /**< Android Accessory property strings, sent to identify the accessory when the
* Android device is switched into Open Accessory mode. */
@@ -103,9 +100,6 @@ * Configured state.
*/
uint8_t InterfaceNumber; /**< Interface index of the AOA interface within the attached device. */
-
- uint16_t DataINPipeSize; /**< Size in bytes of the AOA interface's IN data pipe. */
- uint16_t DataOUTPipeSize; /**< Size in bytes of the AOA interface's OUT data pipe. */
} State; /**< State data for the USB class interface within the device. All elements in this section
* <b>may</b> be set to initial values, but may also be ignored to default to sane values when
* the interface is enumerated.
diff --git a/LUFA/Drivers/USB/Class/Host/AudioClassHost.c b/LUFA/Drivers/USB/Class/Host/AudioClassHost.c index e5591ec1d..12783a6a0 100644 --- a/LUFA/Drivers/USB/Class/Host/AudioClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/AudioClassHost.c @@ -51,8 +51,8 @@ uint8_t Audio_Host_ConfigurePipes(USB_ClassInfo_Audio_Host_t* const AudioInterfa if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration) return AUDIO_ENUMERROR_InvalidConfigDescriptor; - while ((AudioInterfaceInfo->Config.DataINPipeNumber && !(DataINEndpoint)) || - (AudioInterfaceInfo->Config.DataOUTPipeNumber && !(DataOUTEndpoint))) + while ((AudioInterfaceInfo->Config.DataINPipe.Address && !(DataINEndpoint)) || + (AudioInterfaceInfo->Config.DataOUTPipe.Address && !(DataOUTEndpoint))) { if (!(AudioControlInterface) || USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData, @@ -93,45 +93,21 @@ uint8_t Audio_Host_ConfigurePipes(USB_ClassInfo_Audio_Host_t* const AudioInterfa DataOUTEndpoint = EndpointData; } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - bool DoubleBanked; - - if (PipeNum == AudioInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_ISOCHRONOUS; - DoubleBanked = true; - - AudioInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == AudioInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_ISOCHRONOUS; - DoubleBanked = true; - - AudioInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return AUDIO_ENUMERROR_PipeConfigurationFailed; - } - } + AudioInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + AudioInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + AudioInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_ISOCHRONOUS; + AudioInterfaceInfo->Config.DataINPipe.Banks = 2; + + AudioInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + AudioInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + AudioInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_ISOCHRONOUS; + AudioInterfaceInfo->Config.DataOUTPipe.Banks = 2; + + if (!(Pipe_ConfigurePipeTable(&AudioInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&AudioInterfaceInfo->Config.DataOUTPipe, 1))) + return false; AudioInterfaceInfo->State.ControlInterfaceNumber = AudioControlInterface->InterfaceNumber; AudioInterfaceInfo->State.StreamingInterfaceNumber = AudioStreamingInterface->InterfaceNumber; diff --git a/LUFA/Drivers/USB/Class/Host/AudioClassHost.h b/LUFA/Drivers/USB/Class/Host/AudioClassHost.h index a6e425d5f..2d39aa9ca 100644 --- a/LUFA/Drivers/USB/Class/Host/AudioClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/AudioClassHost.h @@ -79,14 +79,8 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the Audio interface's IN data pipe. If this interface should not - * bind to an IN endpoint, this may be set to 0 to disable audio input streaming for - * this driver instance. - */ - uint8_t DataOUTPipeNumber; /**< Pipe number of the Audio interface's OUT data pipe. If this interface should not - * bind to an OUT endpoint, this may be set to 0 to disable audio output streaming for - * this driver instance. - */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * <b>must</b> be set or the interface will fail to enumerate and operate correctly. */ @@ -100,9 +94,6 @@ uint8_t StreamingInterfaceNumber; /**< Interface index of the Audio Streaming interface within the attached device. */ uint8_t EnabledStreamingAltIndex; /**< Alternative setting index of the Audio Streaming interface when the stream is enabled. */ - - uint16_t DataINPipeSize; /**< Size in bytes of the Audio interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the Audio interface's OUT data pipe. */ } State; /**< State data for the USB class interface within the device. All elements in this section * <b>may</b> be set to initial values, but may also be ignored to default to sane values when * the interface is enumerated. @@ -201,7 +192,7 @@ bool SampleReceived = false; - Pipe_SelectPipe(AudioInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(AudioInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); SampleReceived = Pipe_IsINReceived(); Pipe_Freeze(); @@ -226,7 +217,7 @@ if ((USB_HostState != HOST_STATE_Configured) || !(AudioInterfaceInfo->State.IsActive)) return false; - Pipe_SelectPipe(AudioInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(AudioInterfaceInfo->Config.DataOUTPipe.Address); return Pipe_IsOUTReady(); } diff --git a/LUFA/Drivers/USB/Class/Host/CDCClassHost.c b/LUFA/Drivers/USB/Class/Host/CDCClassHost.c index 63df6b0c5..8c79e9c22 100644 --- a/LUFA/Drivers/USB/Class/Host/CDCClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/CDCClassHost.c @@ -99,62 +99,26 @@ uint8_t CDC_Host_ConfigurePipes(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo } } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - uint8_t InterruptPeriod; - bool DoubleBanked; - - if (PipeNum == CDCInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_BULK; - DoubleBanked = CDCInterfaceInfo->Config.DataINPipeDoubleBank; - InterruptPeriod = 0; - - CDCInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == CDCInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = CDCInterfaceInfo->Config.DataOUTPipeDoubleBank; - InterruptPeriod = 0; - - CDCInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else if (PipeNum == CDCInterfaceInfo->Config.NotificationPipeNumber) - { - Size = le16_to_cpu(NotificationEndpoint->EndpointSize); - EndpointAddress = NotificationEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = CDCInterfaceInfo->Config.NotificationPipeDoubleBank; - InterruptPeriod = NotificationEndpoint->PollingIntervalMS; - - CDCInterfaceInfo->State.NotificationPipeSize = NotificationEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return CDC_ENUMERROR_PipeConfigurationFailed; - } - - if (InterruptPeriod) - Pipe_SetInterruptPeriod(InterruptPeriod); - } + CDCInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + CDCInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + CDCInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK; + + CDCInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + CDCInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + CDCInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK; + + CDCInterfaceInfo->Config.NotificationPipe.Size = le16_to_cpu(NotificationEndpoint->EndpointSize); + CDCInterfaceInfo->Config.NotificationPipe.EndpointAddress = NotificationEndpoint->EndpointAddress; + CDCInterfaceInfo->Config.NotificationPipe.Type = EP_TYPE_INTERRUPT; + + if (!(Pipe_ConfigurePipeTable(&CDCInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&CDCInterfaceInfo->Config.DataOUTPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&CDCInterfaceInfo->Config.NotificationPipe, 1))) + return false; CDCInterfaceInfo->State.ControlInterfaceNumber = CDCControlInterface->InterfaceNumber; CDCInterfaceInfo->State.ControlLineStates.HostToDevice = (CDC_CONTROL_LINE_OUT_RTS | CDC_CONTROL_LINE_OUT_DTR); @@ -231,7 +195,7 @@ void CDC_Host_USBTask(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive)) return; - Pipe_SelectPipe(CDCInterfaceInfo->Config.NotificationPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.NotificationPipe.Address); Pipe_Unfreeze(); if (Pipe_IsINReceived()) @@ -321,7 +285,7 @@ uint8_t CDC_Host_SendData(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, uint8_t ErrorCode; - Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); ErrorCode = Pipe_Write_Stream_LE(Buffer, Length, NULL); @@ -338,7 +302,7 @@ uint8_t CDC_Host_SendString(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, uint8_t ErrorCode; - Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); ErrorCode = Pipe_Write_Stream_LE(String, strlen(String), NULL); @@ -355,7 +319,7 @@ uint8_t CDC_Host_SendByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, uint8_t ErrorCode; - Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (!(Pipe_IsReadWriteAllowed())) @@ -377,7 +341,7 @@ uint16_t CDC_Host_BytesReceived(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive)) return 0; - Pipe_SelectPipe(CDCInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsINReceived()) @@ -409,7 +373,7 @@ int16_t CDC_Host_ReceiveByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) int16_t ReceivedByte = -1; - Pipe_SelectPipe(CDCInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsINReceived()) @@ -433,7 +397,7 @@ uint8_t CDC_Host_Flush(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) uint8_t ErrorCode; - Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (!(Pipe_BytesInPipe())) diff --git a/LUFA/Drivers/USB/Class/Host/CDCClassHost.h b/LUFA/Drivers/USB/Class/Host/CDCClassHost.h index 5a8df2414..4d79ed951 100644 --- a/LUFA/Drivers/USB/Class/Host/CDCClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/CDCClassHost.h @@ -81,14 +81,9 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the CDC interface's IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the CDC interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the CDC interface's OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the CDC interface's OUT data pipe should use double banking. */ - - uint8_t NotificationPipeNumber; /**< Pipe number of the CDC interface's IN notification endpoint, if used. */ - bool NotificationPipeDoubleBank; /**< Indicates if the CDC interface's notification pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ + USB_Pipe_Table_t NotificationPipe; /**< Notification IN Pipe configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * <b>must</b> be set or the interface will fail to enumerate and operate correctly. */ @@ -100,10 +95,6 @@ */ uint8_t ControlInterfaceNumber; /**< Interface index of the CDC-ACM control interface within the attached device. */ - uint16_t DataINPipeSize; /**< Size in bytes of the CDC interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the CDC interface's OUT data pipe. */ - uint16_t NotificationPipeSize; /**< Size in bytes of the CDC interface's IN notification pipe, if used. */ - struct { uint16_t HostToDevice; /**< Control line states from the host to device, as a set of \c CDC_CONTROL_LINE_OUT_* diff --git a/LUFA/Drivers/USB/Class/Host/HIDClassHost.c b/LUFA/Drivers/USB/Class/Host/HIDClassHost.c index f51bdf74f..dad6a5afc 100644 --- a/LUFA/Drivers/USB/Class/Host/HIDClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/HIDClassHost.c @@ -94,55 +94,19 @@ uint8_t HID_Host_ConfigurePipes(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo DataOUTEndpoint = EndpointData; } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - uint8_t InterruptPeriod; - bool DoubleBanked; - - if (PipeNum == HIDInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = HIDInterfaceInfo->Config.DataINPipeDoubleBank; - InterruptPeriod = DataINEndpoint->PollingIntervalMS; - - HIDInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == HIDInterfaceInfo->Config.DataOUTPipeNumber) - { - if (DataOUTEndpoint == NULL) - continue; - - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = HIDInterfaceInfo->Config.DataOUTPipeDoubleBank; - InterruptPeriod = DataOUTEndpoint->PollingIntervalMS; - - HIDInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - HIDInterfaceInfo->State.DeviceUsesOUTPipe = true; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return HID_ENUMERROR_PipeConfigurationFailed; - } - - if (InterruptPeriod) - Pipe_SetInterruptPeriod(InterruptPeriod); - } + HIDInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + HIDInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + HIDInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_INTERRUPT; + + HIDInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + HIDInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + HIDInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_INTERRUPT; + + if (!(Pipe_ConfigurePipeTable(&HIDInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&HIDInterfaceInfo->Config.DataOUTPipe, 1))) + return false; HIDInterfaceInfo->State.InterfaceNumber = HIDInterface->InterfaceNumber; HIDInterfaceInfo->State.HIDReportSize = LE16_TO_CPU(HIDDescriptor->HIDReportLength); @@ -227,7 +191,7 @@ uint8_t HID_Host_ReceiveReport(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, uint8_t ErrorCode; - Pipe_SelectPipe(HIDInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(HIDInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); uint16_t ReportSize; @@ -277,7 +241,7 @@ uint8_t HID_Host_SendReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo { uint8_t ErrorCode; - Pipe_SelectPipe(HIDInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(HIDInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (ReportID) @@ -320,7 +284,7 @@ bool HID_Host_IsReportReceived(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) bool ReportReceived; - Pipe_SelectPipe(HIDInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(HIDInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); ReportReceived = Pipe_IsINReceived(); diff --git a/LUFA/Drivers/USB/Class/Host/HIDClassHost.h b/LUFA/Drivers/USB/Class/Host/HIDClassHost.h index 7bdaad18b..882cc31df 100644 --- a/LUFA/Drivers/USB/Class/Host/HIDClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/HIDClassHost.h @@ -83,11 +83,8 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the HID interface's IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the HID interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the HID interface's OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the HID interface's OUT data pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ uint8_t HIDInterfaceProtocol; /**< HID interface protocol value to match against if a specific * boot subclass protocol is required, a protocol value from the @@ -112,9 +109,6 @@ */ uint8_t InterfaceNumber; /**< Interface index of the HID interface within the attached device. */ - uint16_t DataINPipeSize; /**< Size in bytes of the HID interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the HID interface's OUT data pipe. */ - bool SupportsBootProtocol; /**< Indicates if the current interface instance supports the HID Boot * Protocol when enabled via \ref HID_Host_SetBootProtocol(). */ diff --git a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.c b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.c index 5aadbcc7f..0d33bfec4 100644 --- a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.c @@ -78,45 +78,19 @@ uint8_t MIDI_Host_ConfigurePipes(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceI DataOUTEndpoint = EndpointData; } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - bool DoubleBanked; - - if (PipeNum == MIDIInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_BULK; - DoubleBanked = MIDIInterfaceInfo->Config.DataINPipeDoubleBank; - - MIDIInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == MIDIInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = MIDIInterfaceInfo->Config.DataOUTPipeDoubleBank; - - MIDIInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return MIDI_ENUMERROR_PipeConfigurationFailed; - } - } + MIDIInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + MIDIInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + MIDIInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK; + + MIDIInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + MIDIInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + MIDIInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK; + + if (!(Pipe_ConfigurePipeTable(&MIDIInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&MIDIInterfaceInfo->Config.DataOUTPipe, 1))) + return false; MIDIInterfaceInfo->State.InterfaceNumber = MIDIInterface->InterfaceNumber; MIDIInterfaceInfo->State.IsActive = true; @@ -181,7 +155,7 @@ uint8_t MIDI_Host_Flush(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo) uint8_t ErrorCode; - Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataOUTPipe.Address); if (Pipe_BytesInPipe()) { @@ -202,7 +176,7 @@ uint8_t MIDI_Host_SendEventPacket(USB_ClassInfo_MIDI_Host_t* const MIDIInterface uint8_t ErrorCode; - Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataOUTPipe.Address); if ((ErrorCode = Pipe_Write_Stream_LE(Event, sizeof(MIDI_EventPacket_t), NULL)) != PIPE_RWSTREAM_NoError) return ErrorCode; @@ -219,7 +193,7 @@ bool MIDI_Host_ReceiveEventPacket(USB_ClassInfo_MIDI_Host_t* const MIDIInterface if ((USB_HostState != HOST_STATE_Configured) || !(MIDIInterfaceInfo->State.IsActive)) return HOST_SENDCONTROL_DeviceDisconnected; - Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataINPipe.Address); if (!(Pipe_IsReadWriteAllowed())) return false; diff --git a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h index e934ddacb..b9e861143 100644 --- a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h @@ -79,11 +79,8 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the MIDI interface's streaming IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the MIDI interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the MIDI interface's streaming OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the MIDI interface's OUT data pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * <b>must</b> be set or the interface will fail to enumerate and operate correctly. */ @@ -94,9 +91,6 @@ * Configured state. */ uint8_t InterfaceNumber; /**< Interface index of the MIDI interface within the attached device. */ - - uint16_t DataINPipeSize; /**< Size in bytes of the MIDI Streaming Data interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the MIDI Streaming Data interface's OUT data pipe. */ } State; /**< State data for the USB class interface within the device. All elements in this section * <b>may</b> be set to initial values, but may also be ignored to default to sane values when * the interface is enumerated. diff --git a/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c b/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c index 24b4edc76..f145881fd 100644 --- a/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c @@ -78,45 +78,19 @@ uint8_t MS_Host_ConfigurePipes(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, DataOUTEndpoint = EndpointData; } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - bool DoubleBanked; - - if (PipeNum == MSInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_BULK; - DoubleBanked = MSInterfaceInfo->Config.DataINPipeDoubleBank; - - MSInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == MSInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = MSInterfaceInfo->Config.DataOUTPipeDoubleBank; - - MSInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return MS_ENUMERROR_PipeConfigurationFailed; - } - } + MSInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + MSInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + MSInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK; + + MSInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + MSInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + MSInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK; + + if (!(Pipe_ConfigurePipeTable(&MSInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&MSInterfaceInfo->Config.DataOUTPipe, 1))) + return false; MSInterfaceInfo->State.InterfaceNumber = MassStorageInterface->InterfaceNumber; MSInterfaceInfo->State.IsActive = true; @@ -178,7 +152,7 @@ static uint8_t MS_Host_SendCommand(USB_ClassInfo_MS_Host_t* const MSInterfaceInf SCSICommandBlock->Signature = CPU_TO_LE32(MS_CBW_SIGNATURE); SCSICommandBlock->Tag = cpu_to_le32(MSInterfaceInfo->State.TransactionTag); - Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Write_Stream_LE(SCSICommandBlock, sizeof(MS_CommandBlockWrapper_t), @@ -212,7 +186,7 @@ static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInte uint16_t TimeoutMSRem = MS_COMMAND_DATA_TIMEOUT_MS; uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber(); - Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); while (!(Pipe_IsINReceived())) @@ -228,7 +202,7 @@ static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInte } Pipe_Freeze(); - Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (Pipe_IsStalled()) @@ -238,7 +212,7 @@ static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInte } Pipe_Freeze(); - Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsStalled()) @@ -251,10 +225,10 @@ static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInte return PIPE_RWSTREAM_DeviceDisconnected; }; - Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address); Pipe_Freeze(); - Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Freeze(); return PIPE_RWSTREAM_NoError; @@ -275,7 +249,7 @@ static uint8_t MS_Host_SendReceiveData(USB_ClassInfo_MS_Host_t* const MSInterfac return ErrorCode; } - Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem, NULL)) != PIPE_RWSTREAM_NoError) @@ -285,7 +259,7 @@ static uint8_t MS_Host_SendReceiveData(USB_ClassInfo_MS_Host_t* const MSInterfac } else { - Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Write_Stream_LE(BufferPtr, BytesRem, NULL)) != PIPE_RWSTREAM_NoError) @@ -313,7 +287,7 @@ static uint8_t MS_Host_GetReturnedStatus(USB_ClassInfo_MS_Host_t* const MSInterf if ((ErrorCode = MS_Host_WaitForDataReceived(MSInterfaceInfo)) != PIPE_RWSTREAM_NoError) return ErrorCode; - Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Read_Stream_LE(SCSICommandStatus, sizeof(MS_CommandStatusWrapper_t), @@ -349,12 +323,12 @@ uint8_t MS_Host_ResetMSInterface(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo) if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful) return ErrorCode; - Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address); if ((ErrorCode = USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress())) != HOST_SENDCONTROL_Successful) return ErrorCode; - Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address); if ((ErrorCode = USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress())) != HOST_SENDCONTROL_Successful) return ErrorCode; diff --git a/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h b/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h index 25d7e1e5e..a8763dd5b 100644 --- a/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h @@ -83,11 +83,8 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the Mass Storage interface's IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the Mass Storage interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the Mass Storage interface's OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the Mass Storage interface's OUT data pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * <b>must</b> be set or the interface will fail to enumerate and operate correctly. */ @@ -99,9 +96,6 @@ */ uint8_t InterfaceNumber; /**< Interface index of the Mass Storage interface within the attached device. */ - uint16_t DataINPipeSize; /**< Size in bytes of the Mass Storage interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the Mass Storage interface's OUT data pipe. */ - uint32_t TransactionTag; /**< Current transaction tag for data synchronizing of packets. */ } State; /**< State data for the USB class interface within the device. All elements in this section * <b>may</b> be set to initial values, but may also be ignored to default to sane values when diff --git a/LUFA/Drivers/USB/Class/Host/PrinterClassHost.c b/LUFA/Drivers/USB/Class/Host/PrinterClassHost.c index 379ccb01c..dd33b115b 100644 --- a/LUFA/Drivers/USB/Class/Host/PrinterClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/PrinterClassHost.c @@ -78,45 +78,19 @@ uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceI DataOUTEndpoint = EndpointData; } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - bool DoubleBanked; - - if (PipeNum == PRNTInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_BULK; - DoubleBanked = PRNTInterfaceInfo->Config.DataINPipeDoubleBank; - - PRNTInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == PRNTInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = PRNTInterfaceInfo->Config.DataOUTPipeDoubleBank; - - PRNTInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return PRNT_ENUMERROR_PipeConfigurationFailed; - } - } + PRNTInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + PRNTInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + PRNTInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK; + + PRNTInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + PRNTInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + PRNTInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK; + + if (!(Pipe_ConfigurePipeTable(&PRNTInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&PRNTInterfaceInfo->Config.DataOUTPipe, 1))) + return false; PRNTInterfaceInfo->State.InterfaceNumber = PrinterInterface->InterfaceNumber; PRNTInterfaceInfo->State.AlternateSetting = PrinterInterface->AlternateSetting; @@ -229,7 +203,7 @@ uint8_t PRNT_Host_Flush(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) uint8_t ErrorCode; - Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (!(Pipe_BytesInPipe())) @@ -260,7 +234,7 @@ uint8_t PRNT_Host_SendByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint8_t ErrorCode; - Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (!(Pipe_IsReadWriteAllowed())) @@ -285,7 +259,7 @@ uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, if ((USB_HostState != HOST_STATE_Configured) || !(PRNTInterfaceInfo->State.IsActive)) return PIPE_RWSTREAM_DeviceDisconnected; - Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Write_Stream_LE(String, strlen(String), NULL)) != PIPE_RWSTREAM_NoError) @@ -309,7 +283,7 @@ uint8_t PRNT_Host_SendData(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, if ((USB_HostState != HOST_STATE_Configured) || !(PRNTInterfaceInfo->State.IsActive)) return PIPE_RWSTREAM_DeviceDisconnected; - Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Write_Stream_LE(Buffer, Length, NULL)) != PIPE_RWSTREAM_NoError) @@ -329,7 +303,7 @@ uint16_t PRNT_Host_BytesReceived(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceI if ((USB_HostState != HOST_STATE_Configured) || !(PRNTInterfaceInfo->State.IsActive)) return 0; - Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsINReceived()) @@ -361,7 +335,7 @@ int16_t PRNT_Host_ReceiveByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo int16_t ReceivedByte = -1; - Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsINReceived()) diff --git a/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h b/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h index c8c997f74..25878276f 100644 --- a/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h @@ -79,11 +79,8 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the Printer interface's IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the Printer interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the Printer interface's OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the Printer interface's OUT data pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * <b>must</b> be set or the interface will fail to enumerate and operate correctly. */ @@ -95,9 +92,6 @@ */ uint8_t InterfaceNumber; /**< Interface index of the Printer interface within the attached device. */ uint8_t AlternateSetting; /**< Alternate setting within the Printer Interface in the attached device. */ - - uint16_t DataINPipeSize; /**< Size in bytes of the Printer interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the Printer interface's OUT data pipe. */ } State; /**< State data for the USB class interface within the device. All elements in this section * <b>may</b> be set to initial values, but may also be ignored to default to sane values when * the interface is enumerated. diff --git a/LUFA/Drivers/USB/Class/Host/RNDISClassHost.c b/LUFA/Drivers/USB/Class/Host/RNDISClassHost.c index a03011d64..e457b5dff 100644 --- a/LUFA/Drivers/USB/Class/Host/RNDISClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/RNDISClassHost.c @@ -101,62 +101,26 @@ uint8_t RNDIS_Host_ConfigurePipes(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfa } } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - uint8_t InterruptPeriod; - bool DoubleBanked; - - if (PipeNum == RNDISInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_BULK; - DoubleBanked = RNDISInterfaceInfo->Config.DataINPipeDoubleBank; - InterruptPeriod = 0; - - RNDISInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == RNDISInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = RNDISInterfaceInfo->Config.DataOUTPipeDoubleBank; - InterruptPeriod = 0; - - RNDISInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else if (PipeNum == RNDISInterfaceInfo->Config.NotificationPipeNumber) - { - Size = le16_to_cpu(NotificationEndpoint->EndpointSize); - EndpointAddress = NotificationEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = RNDISInterfaceInfo->Config.NotificationPipeDoubleBank; - InterruptPeriod = NotificationEndpoint->PollingIntervalMS; - - RNDISInterfaceInfo->State.NotificationPipeSize = NotificationEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return CDC_ENUMERROR_PipeConfigurationFailed; - } + RNDISInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + RNDISInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + RNDISInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK; + + RNDISInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + RNDISInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + RNDISInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK; + + RNDISInterfaceInfo->Config.NotificationPipe.Size = le16_to_cpu(NotificationEndpoint->EndpointSize); + RNDISInterfaceInfo->Config.NotificationPipe.EndpointAddress = NotificationEndpoint->EndpointAddress; + RNDISInterfaceInfo->Config.NotificationPipe.Type = EP_TYPE_INTERRUPT; + + if (!(Pipe_ConfigurePipeTable(&RNDISInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&RNDISInterfaceInfo->Config.DataOUTPipe, 1))) + return false; - if (InterruptPeriod) - Pipe_SetInterruptPeriod(InterruptPeriod); - } + if (!(Pipe_ConfigurePipeTable(&RNDISInterfaceInfo->Config.NotificationPipe, 1))) + return false; RNDISInterfaceInfo->State.ControlInterfaceNumber = RNDISControlInterface->InterfaceNumber; RNDISInterfaceInfo->State.IsActive = true; @@ -419,7 +383,7 @@ bool RNDIS_Host_IsPacketReceived(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfac if ((USB_HostState != HOST_STATE_Configured) || !(RNDISInterfaceInfo->State.IsActive)) return false; - Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); PacketWaiting = Pipe_IsINReceived(); @@ -437,7 +401,7 @@ uint8_t RNDIS_Host_ReadPacket(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceIn if ((USB_HostState != HOST_STATE_Configured) || !(RNDISInterfaceInfo->State.IsActive)) return PIPE_READYWAIT_DeviceDisconnected; - Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (!(Pipe_IsReadWriteAllowed())) @@ -491,7 +455,7 @@ uint8_t RNDIS_Host_SendPacket(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceIn DeviceMessage.DataOffset = CPU_TO_LE32(sizeof(RNDIS_Packet_Message_t) - sizeof(RNDIS_Message_Header_t)); DeviceMessage.DataLength = cpu_to_le32(PacketLength); - Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Write_Stream_LE(&DeviceMessage, sizeof(RNDIS_Packet_Message_t), diff --git a/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h b/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h index 085bde22c..57087edf9 100644 --- a/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h @@ -80,14 +80,9 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the RNDIS interface's IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the RNDIS interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the RNDIS interface's OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the RNDIS interface's OUT data pipe should use double banking. */ - - uint8_t NotificationPipeNumber; /**< Pipe number of the RNDIS interface's IN notification endpoint, if used. */ - bool NotificationPipeDoubleBank; /**< Indicates if the RNDIS interface's notification pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ + USB_Pipe_Table_t NotificationPipe; /**< Notification IN Pipe configuration table. */ uint32_t HostMaxPacketSize; /**< Maximum size of a packet which can be buffered by the host. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section @@ -101,10 +96,6 @@ */ uint8_t ControlInterfaceNumber; /**< Interface index of the RNDIS control interface within the attached device. */ - uint16_t DataINPipeSize; /**< Size in bytes of the RNDIS interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the RNDIS interface's OUT data pipe. */ - uint16_t NotificationPipeSize; /**< Size in bytes of the RNDIS interface's IN notification pipe, if used. */ - uint32_t DeviceMaxPacketSize; /**< Maximum size of a packet which can be buffered by the attached RNDIS device. */ uint32_t RequestID; /**< Request ID counter to give a unique ID for each command/response pair. */ diff --git a/LUFA/Drivers/USB/Class/Host/StillImageClassHost.c b/LUFA/Drivers/USB/Class/Host/StillImageClassHost.c index 2b5514a28..5c18d7503 100644 --- a/LUFA/Drivers/USB/Class/Host/StillImageClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/StillImageClassHost.c @@ -87,63 +87,27 @@ uint8_t SI_Host_ConfigurePipes(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, } } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - uint8_t InterruptPeriod; - bool DoubleBanked; - - if (PipeNum == SIInterfaceInfo->Config.DataINPipeNumber) - { - Size = DataINEndpoint->EndpointSize; - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_BULK; - DoubleBanked = SIInterfaceInfo->Config.DataINPipeDoubleBank; - InterruptPeriod = 0; - - SIInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == SIInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = DataOUTEndpoint->EndpointSize; - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = SIInterfaceInfo->Config.DataOUTPipeDoubleBank; - InterruptPeriod = 0; - - SIInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else if (PipeNum == SIInterfaceInfo->Config.EventsPipeNumber) - { - Size = EventsEndpoint->EndpointSize; - EndpointAddress = EventsEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = SIInterfaceInfo->Config.EventsPipeDoubleBank; - InterruptPeriod = EventsEndpoint->PollingIntervalMS; - - SIInterfaceInfo->State.EventsPipeSize = EventsEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return SI_ENUMERROR_PipeConfigurationFailed; - } - - if (InterruptPeriod) - Pipe_SetInterruptPeriod(InterruptPeriod); - } + SIInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + SIInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + SIInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK; + + SIInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + SIInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + SIInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK; + + SIInterfaceInfo->Config.EventsPipe.Size = le16_to_cpu(EventsEndpoint->EndpointSize); + SIInterfaceInfo->Config.EventsPipe.EndpointAddress = EventsEndpoint->EndpointAddress; + SIInterfaceInfo->Config.EventsPipe.Type = EP_TYPE_INTERRUPT; + + if (!(Pipe_ConfigurePipeTable(&SIInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&SIInterfaceInfo->Config.DataOUTPipe, 1))) + return false; + if (!(Pipe_ConfigurePipeTable(&SIInterfaceInfo->Config.EventsPipe, 1))) + return false; + SIInterfaceInfo->State.InterfaceNumber = StillImageInterface->InterfaceNumber; SIInterfaceInfo->State.IsActive = true; @@ -204,7 +168,7 @@ uint8_t SI_Host_SendBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, if (SIInterfaceInfo->State.IsSessionOpen) PIMAHeader->TransactionID = cpu_to_le32(SIInterfaceInfo->State.TransactionID++); - Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Write_Stream_LE(PIMAHeader, PIMA_COMMAND_SIZE(0), NULL)) != PIPE_RWSTREAM_NoError) @@ -233,7 +197,7 @@ uint8_t SI_Host_ReceiveBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInf if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive)) return PIPE_RWSTREAM_DeviceDisconnected; - Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); while (!(Pipe_IsINReceived())) @@ -249,7 +213,7 @@ uint8_t SI_Host_ReceiveBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInf } Pipe_Freeze(); - Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (Pipe_IsStalled()) @@ -259,7 +223,7 @@ uint8_t SI_Host_ReceiveBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInf } Pipe_Freeze(); - Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsStalled()) @@ -298,7 +262,7 @@ uint8_t SI_Host_SendData(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive)) return PIPE_RWSTREAM_DeviceDisconnected; - Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); ErrorCode = Pipe_Write_Stream_LE(Buffer, Bytes, NULL); @@ -318,7 +282,7 @@ uint8_t SI_Host_ReadData(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive)) return PIPE_RWSTREAM_DeviceDisconnected; - Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); ErrorCode = Pipe_Read_Stream_LE(Buffer, Bytes, NULL); @@ -335,7 +299,7 @@ bool SI_Host_IsEventReceived(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive)) return false; - Pipe_SelectPipe(SIInterfaceInfo->Config.EventsPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.EventsPipe.Address); Pipe_Unfreeze(); if (Pipe_BytesInPipe()) @@ -354,7 +318,7 @@ uint8_t SI_Host_ReceiveEventHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInf if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive)) return PIPE_RWSTREAM_DeviceDisconnected; - Pipe_SelectPipe(SIInterfaceInfo->Config.EventsPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.EventsPipe.Address); Pipe_Unfreeze(); ErrorCode = Pipe_Read_Stream_LE(PIMAHeader, sizeof(PIMA_Container_t), NULL); diff --git a/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h b/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h index 4cda70d2e..be616b459 100644 --- a/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h @@ -83,14 +83,9 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the Still Image interface's IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the Still Image interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the Still Image interface's OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the Still Image interface's OUT data pipe should use double banking. */ - - uint8_t EventsPipeNumber; /**< Pipe number of the Still Image interface's IN events endpoint, if used. */ - bool EventsPipeDoubleBank; /**< Indicates if the Still Image interface's events data pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ + USB_Pipe_Table_t EventsPipe; /**< Event notification IN Pipe configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * <b>must</b> be set or the interface will fail to enumerate and operate correctly. */ @@ -102,10 +97,6 @@ */ uint8_t InterfaceNumber; /**< Interface index of the Still Image interface within the attached device. */ - uint16_t DataINPipeSize; /**< Size in bytes of the Still Image interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the Still Image interface's OUT data pipe. */ - uint16_t EventsPipeSize; /**< Size in bytes of the Still Image interface's IN events pipe. */ - bool IsSessionOpen; /**< Indicates if a PIMA session is currently open with the attached device. */ uint32_t TransactionID; /**< Transaction ID for the next transaction to send to the device. */ } State; /**< State data for the USB class interface within the device. All elements in this section diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c index bcf904d99..4440b7631 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c +++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c @@ -42,6 +42,21 @@ uint8_t USB_Device_ControlEndpointSize = ENDPOINT_CONTROLEP_DEFAULT_SIZE; #endif +bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Endpoint_ConfigureEndpoint(Table[i].Address, Table[i].Type, Table[i].Size, Table[i].Banks))) + return false; + } + + return true; +} + bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number, const uint8_t UECFG0XData, const uint8_t UECFG1XData) diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h index 10f69a8fd..37ff220e3 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h @@ -89,35 +89,6 @@ /* Private Interface - For use in library only: */ #if !defined(__DOXYGEN__) - /* Macros: */ - #define _ENDPOINT_GET_MAXSIZE(EPIndex) _ENDPOINT_GET_MAXSIZE2(ENDPOINT_DETAILS_EP ## EPIndex) - #define _ENDPOINT_GET_MAXSIZE2(EPDetails) _ENDPOINT_GET_MAXSIZE3(EPDetails) - #define _ENDPOINT_GET_MAXSIZE3(MaxSize, Banks) (MaxSize) - - #define _ENDPOINT_GET_BANKS(EPIndex) _ENDPOINT_GET_BANKS2(ENDPOINT_DETAILS_EP ## EPIndex) - #define _ENDPOINT_GET_BANKS2(EPDetails) _ENDPOINT_GET_BANKS3(EPDetails) - #define _ENDPOINT_GET_BANKS3(MaxSize, Banks) (Banks) - - #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) - #define ENDPOINT_DETAILS_MAXEP 7 - - #define ENDPOINT_DETAILS_EP0 64, 1 - #define ENDPOINT_DETAILS_EP1 256, 2 - #define ENDPOINT_DETAILS_EP2 64, 2 - #define ENDPOINT_DETAILS_EP3 64, 2 - #define ENDPOINT_DETAILS_EP4 64, 2 - #define ENDPOINT_DETAILS_EP5 64, 2 - #define ENDPOINT_DETAILS_EP6 64, 2 - #else - #define ENDPOINT_DETAILS_MAXEP 5 - - #define ENDPOINT_DETAILS_EP0 64, 1 - #define ENDPOINT_DETAILS_EP1 64, 1 - #define ENDPOINT_DETAILS_EP2 64, 1 - #define ENDPOINT_DETAILS_EP3 64, 2 - #define ENDPOINT_DETAILS_EP4 64, 2 - #endif - /* Inline Functions: */ static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST ATTR_ALWAYS_INLINE; @@ -145,23 +116,6 @@ /* Public Interface - May be used in end-application: */ /* Macros: */ - /** \name Endpoint Bank Mode Masks */ - //@{ - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have one single bank, which requires less USB FIFO memory but results - * in slower transfers as only one USB device (the AVR or the host) can access the endpoint's - * bank at the one time. - */ - #define ENDPOINT_BANK_SINGLE (0 << EPBK0) - - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have two banks, which requires more USB FIFO memory but results - * in faster transfers as one USB device (the AVR or the host) can access one bank while the other - * accesses the second bank. - */ - #define ENDPOINT_BANK_DOUBLE (1 << EPBK0) - //@} - #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined. @@ -169,30 +123,16 @@ #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8 #endif - /** Retrieves the maximum bank size in bytes of a given endpoint. - * - * \attention This macro will only work correctly on endpoint indexes that are compile-time constants - * defined by the preprocessor. - * - * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) - */ - #define ENDPOINT_MAX_SIZE(EPIndex) _ENDPOINT_GET_MAXSIZE(EPIndex) - - /** Retrieves the total number of banks supported by the given endpoint. - * - * \attention This macro will only work correctly on endpoint indexes that are compile-time constants - * defined by the preprocessor. - * - * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) - */ - #define ENDPOINT_BANKS_SUPPORTED(EPIndex) _ENDPOINT_GET_BANKS(EPIndex) - #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__) - /** Total number of endpoints (including the default control endpoint at address 0) which may - * be used in the device. Different USB AVR models support different amounts of endpoints, - * this value reflects the maximum number of endpoints for the currently selected AVR model. - */ - #define ENDPOINT_TOTAL_ENDPOINTS ENDPOINT_DETAILS_MAXEP + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + #define ENDPOINT_TOTAL_ENDPOINTS 7 + #else + /** Total number of endpoints (including the default control endpoint at address 0) which may + * be used in the device. Different USB AVR models support different amounts of endpoints, + * this value reflects the maximum number of endpoints for the currently selected AVR model. + */ + #define ENDPOINT_TOTAL_ENDPOINTS 5 + #endif #else #define ENDPOINT_TOTAL_ENDPOINTS 1 #endif @@ -222,28 +162,20 @@ }; /* Inline Functions: */ - /** Configures the specified endpoint number with the given endpoint type, direction, bank size - * and banking mode. Once configured, the endpoint may be read from or written to, depending - * on its direction. + /** Configures the specified endpoint address with the given endpoint type, bank size and number of hardware + * banks. Once configured, the endpoint may be read from or written to, depending on its direction. * - * \param[in] Number Endpoint number to configure. This must be more than 0 and less than - * \ref ENDPOINT_TOTAL_ENDPOINTS. + * \param[in] Address Endpoint address to configure. * * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types * are available on Low Speed USB devices - refer to the USB 2.0 specification. * - * \param[in] Direction Endpoint data direction, either \ref ENDPOINT_DIR_OUT or \ref ENDPOINT_DIR_IN. - * All endpoints (except Control type) are unidirectional - data may only be read - * from or written to the endpoint bank based on its direction, not both. - * * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted * to the USB host, or after they have been received from the USB host (depending on * the endpoint's data direction). The bank size must indicate the maximum packet size * that the endpoint can handle. * - * \param[in] Banks Number of banks to use for the endpoint being configured, an \c ENDPOINT_BANK_* mask. - * More banks uses more USB DPRAM, but offers better performance. Isochronous type - * endpoints <b>must</b> have at least two banks. + * \param[in] Banks Number of banks to use for the endpoint being configured. * * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints <b>must</b> be configured in * ascending order, or bank corruption will occur. @@ -261,19 +193,18 @@ * * \return Boolean \c true if the configuration succeeded, \c false otherwise. */ - static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, const uint8_t Type, - const uint8_t Direction, const uint16_t Size, const uint8_t Banks) ATTR_ALWAYS_INLINE; - static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, const uint8_t Type, - const uint8_t Direction, const uint16_t Size, const uint8_t Banks) { - return Endpoint_ConfigureEndpoint_Prv(Number, ((Type << EPTYPE0) | (Direction ? (1 << EPDIR) : 0)), - ((1 << ALLOC) | Banks | Endpoint_BytesToEPSizeMask(Size))); + return Endpoint_ConfigureEndpoint_Prv((Address & ENDPOINT_EPNUM_MASK), + ((Type << EPTYPE0) | ((Address & ENDPOINT_DIR_IN) ? (1 << EPDIR) : 0)), + ((1 << ALLOC) | ((Banks > 1) ? (1 << EPBK0) : 0) | Endpoint_BytesToEPSizeMask(Size))); } /** Indicates the number of bytes currently stored in the current endpoint's selected bank. @@ -294,9 +225,19 @@ #endif } + /** Determines the currently selected endpoint's direction. + * + * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask. + */ + static inline uint8_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetEndpointDirection(void) + { + return (UECFG0X & (1 << EPDIR)) ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT; + } + /** Get the endpoint address of the currently selected endpoint. This is typically used to save - * the currently selected endpoint number so that it can be restored after another endpoint has - * been manipulated. + * the currently selected endpoint so that it can be restored after another endpoint has been + * manipulated. * * \return Index of the currently selected endpoint. */ @@ -304,38 +245,36 @@ static inline uint8_t Endpoint_GetCurrentEndpoint(void) { #if !defined(CONTROL_ONLY_DEVICE) - return (UENUM & ENDPOINT_EPNUM_MASK); + return ((UENUM & ENDPOINT_EPNUM_MASK) | Endpoint_GetEndpointDirection()); #else return ENDPOINT_CONTROLEP; #endif } - /** Selects the given endpoint number. If the address from the device descriptors is used, the - * value should be masked with the \ref ENDPOINT_EPNUM_MASK constant to extract only the endpoint - * number (and discarding the endpoint direction bit). + /** Selects the given endpoint address. * - * Any endpoint operations which do not require the endpoint number to be indicated will operate on + * Any endpoint operations which do not require the endpoint address to be indicated will operate on * the currently selected endpoint. * - * \param[in] EndpointNumber Endpoint number to select. + * \param[in] Address Endpoint address to select. */ - static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; - static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) + static inline void Endpoint_SelectEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_SelectEndpoint(const uint8_t Address) { #if !defined(CONTROL_ONLY_DEVICE) - UENUM = EndpointNumber; + UENUM = (Address & ENDPOINT_EPNUM_MASK); #endif } /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's * data In and Out pointers to the bank's contents. * - * \param[in] EndpointNumber Endpoint number whose FIFO buffers are to be reset. + * \param[in] Address Endpoint address whose FIFO buffers are to be reset. */ - static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; - static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) + static inline void Endpoint_ResetEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetEndpoint(const uint8_t Address) { - UERST = (1 << EndpointNumber); + UERST = (1 << (Address & ENDPOINT_EPNUM_MASK)); UERST = 0; } @@ -441,14 +380,14 @@ /** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type * endpoints). * - * \param[in] EndpointNumber Index of the endpoint whose interrupt flag should be tested. + * \param[in] Address Address of the endpoint whose interrupt flag should be tested. * * \return Boolean \c true if the specified endpoint has interrupted, \c false otherwise. */ - static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) { - return ((Endpoint_GetEndpointInterrupts() & (1 << EndpointNumber)) ? true : false); + return ((Endpoint_GetEndpointInterrupts() & (1 << (Address & ENDPOINT_EPNUM_MASK))) ? true : false); } /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host. @@ -576,16 +515,6 @@ UECONX |= (1 << RSTDT); } - /** Determines the currently selected endpoint's direction. - * - * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask. - */ - static inline uint8_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline uint8_t Endpoint_GetEndpointDirection(void) - { - return (UECFG0X & (1 << EPDIR)) ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT; - } - /** Sets the direction of the currently selected endpoint. * * \param[in] DirectionMask New endpoint direction, as a \c ENDPOINT_DIR_* mask. @@ -841,6 +770,20 @@ #endif /* Function Prototypes: */ + /** Configures a table of endpoint descriptions, in sequence. This function can be used to configure multiple + * endpoints at the same time. + * + * \note Endpoints with a zero address will be ignored, thus this function cannot be used to configure the + * control endpoint. + * + * \param[in] Table Pointer to a table of endpoint descriptions. + * \param[in] Entries Number of entries in the endpoint table to configure. + * + * \return Boolean \c true if all endpoints configured successfully, \c false otherwise. + */ + bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries); + /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, * with respect to the data direction. This is a convenience function which can be used to * simplify user control request handling. diff --git a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c index 3f27c7631..a1e0fd371 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c +++ b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c @@ -114,9 +114,7 @@ void USB_Host_ProcessNextHostState(void) HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe); break; case HOST_STATE_Powered_ConfigPipe: - if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, - PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP, - PIPE_CONTROLPIPE_DEFAULT_SIZE, PIPE_BANK_SINGLE))) + if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, PIPE_CONTROLPIPE_DEFAULT_SIZE, 1))) { ErrorCode = HOST_ENUMERROR_PipeConfigError; SubErrorCode = 0; @@ -151,9 +149,7 @@ void USB_Host_ProcessNextHostState(void) HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset); break; case HOST_STATE_Default_PostReset: - if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, - PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP, - USB_Host_ControlPipeSize, PIPE_BANK_SINGLE))) + if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, USB_Host_ControlPipeSize, 1))) { ErrorCode = HOST_ENUMERROR_PipeConfigError; SubErrorCode = 0; diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c index 5e68cc725..1ddffb51e 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c +++ b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c @@ -40,21 +40,43 @@ uint8_t USB_Host_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE; -bool Pipe_ConfigurePipe(const uint8_t Number, +bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Pipe_ConfigurePipe(Table[i].Address, Table[i].Type, Table[i].EndpointAddress, Table[i].Size, Table[i].Banks))) + { + return false; + } + } + + return true; +} + +bool Pipe_ConfigurePipe(const uint8_t Address, const uint8_t Type, - const uint8_t Token, - const uint8_t EndpointNumber, + const uint8_t EndpointAddress, const uint16_t Size, const uint8_t Banks) { + uint8_t Number = (Address & PIPE_EPNUM_MASK); + uint8_t Token = (Address & PIPE_DIR_IN) ? PIPE_TOKEN_IN : PIPE_TOKEN_OUT; + + if (Type == EP_TYPE_CONTROL) + Token = PIPE_TOKEN_SETUP; + #if defined(ORDERED_EP_CONFIG) Pipe_SelectPipe(Number); Pipe_EnablePipe(); UPCFG1X = 0; - UPCFG0X = ((Type << EPTYPE0) | Token | ((EndpointNumber & PIPE_EPNUM_MASK) << PEPNUM0)); - UPCFG1X = ((1 << ALLOC) | Banks | Pipe_BytesToEPSizeMask(Size)); + UPCFG0X = ((Type << EPTYPE0) | Token | ((EndpointAddress & PIPE_EPNUM_MASK) << PEPNUM0)); + UPCFG1X = ((1 << ALLOC) | ((Banks > 1) ? (1 << EPBK0) : 0) | Pipe_BytesToEPSizeMask(Size)); Pipe_SetInfiniteINRequests(); @@ -71,7 +93,7 @@ bool Pipe_ConfigurePipe(const uint8_t Number, if (PNum == Number) { - UPCFG0XTemp = ((Type << EPTYPE0) | Token | ((EndpointNumber & PIPE_EPNUM_MASK) << PEPNUM0)); + UPCFG0XTemp = ((Type << EPTYPE0) | Token | ((EndpointAddress & PIPE_EPNUM_MASK) << PEPNUM0)); UPCFG1XTemp = ((1 << ALLOC) | Banks | Pipe_BytesToEPSizeMask(Size)); UPCFG2XTemp = 0; UPIENXTemp = 0; diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h index 86792bf22..1012fa060 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h @@ -124,38 +124,22 @@ /** \name Pipe Token Masks */ //@{ - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a SETUP token (for CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a SETUP token (for CONTROL type pipes), * which will trigger a control request on the attached device when data is written to the pipe. */ #define PIPE_TOKEN_SETUP (0 << PTOKEN0) - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a IN token (for non-CONTROL type pipes), * indicating that the pipe data will flow from device to host. */ #define PIPE_TOKEN_IN (1 << PTOKEN0) - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a OUT token (for non-CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a OUT token (for non-CONTROL type pipes), * indicating that the pipe data will flow from host to device. */ #define PIPE_TOKEN_OUT (2 << PTOKEN0) //@} - /** \name Pipe Bank Mode Masks */ - //@{ - /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe - * should have one single bank, which requires less USB FIFO memory but results in slower transfers as - * only one USB device (the AVR or the attached device) can access the pipe's bank at the one time. - */ - #define PIPE_BANK_SINGLE (0 << EPBK0) - - /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe - * should have two banks, which requires more USB FIFO memory but results in faster transfers as one - * USB device (the AVR or the attached device) can access one bank while the other accesses the second - * bank. - */ - #define PIPE_BANK_DOUBLE (1 << EPBK0) - //@} - /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value * in the device descriptor of the attached device. */ @@ -203,36 +187,46 @@ return UPBCX; } + /** Determines the currently selected pipe's direction. + * + * \return The currently selected pipe's direction, as a \c PIPE_DIR_* mask. + */ + static inline uint8_t Pipe_GetPipeDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeDirection(void) + { + return (UPCFG0X & (1 << EPDIR)) ? PIPE_DIR_IN : PIPE_DIR_OUT; + } + /** Returns the pipe address of the currently selected pipe. This is typically used to save the - * currently selected pipe number so that it can be restored after another pipe has been manipulated. + * currently selected pipe address so that it can be restored after another pipe has been manipulated. * * \return Index of the currently selected pipe. */ static inline uint8_t Pipe_GetCurrentPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; static inline uint8_t Pipe_GetCurrentPipe(void) { - return (UPNUM & PIPE_PIPENUM_MASK); + return ((UPNUM & PIPE_PIPENUM_MASK) | Pipe_GetPipeDirection()); } - /** Selects the given pipe number. Any pipe operations which do not require the pipe number to be + /** Selects the given pipe address. Any pipe operations which do not require the pipe address to be * indicated will operate on the currently selected pipe. * - * \param[in] PipeNumber Index of the pipe to select. + * \param[in] Address Address of the pipe to select. */ - static inline void Pipe_SelectPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; - static inline void Pipe_SelectPipe(const uint8_t PipeNumber) + static inline void Pipe_SelectPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_SelectPipe(const uint8_t Address) { - UPNUM = PipeNumber; + UPNUM = (Address & PIPE_PIPENUM_MASK); } /** Resets the desired pipe, including the pipe banks and flags. * - * \param[in] PipeNumber Index of the pipe to reset. + * \param[in] Address Address of the pipe to reset. */ - static inline void Pipe_ResetPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; - static inline void Pipe_ResetPipe(const uint8_t PipeNumber) + static inline void Pipe_ResetPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_ResetPipe(const uint8_t Address) { - UPRST = (1 << PipeNumber); + UPRST = (1 << (Address & PIPE_PIPENUM_MASK)); UPRST = 0; } @@ -326,8 +320,9 @@ static inline uint8_t Pipe_GetBoundEndpointAddress(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; static inline uint8_t Pipe_GetBoundEndpointAddress(void) { - return (((UPCFG0X >> PEPNUM0) & PIPE_EPNUM_MASK) | - ((Pipe_GetPipeToken() == PIPE_TOKEN_IN) ? PIPE_EPDIR_MASK : 0)); + uint8_t UPCFG0X_Temp = UPCFG0X; + + return (((UPCFG0X_Temp >> PEPNUM0) & PIPE_EPNUM_MASK) | ((UPCFG0X_Temp & PEPNUM1) ? ENDPOINT_DIR_OUT : ENDPOINT_DIR_IN)); } /** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds. @@ -351,17 +346,17 @@ return UPINT; } - /** Determines if the specified pipe number has interrupted (valid only for INTERRUPT type + /** Determines if the specified pipe address has interrupted (valid only for INTERRUPT type * pipes). * - * \param[in] PipeNumber Index of the pipe whose interrupt flag should be tested. + * \param[in] Address Address of the pipe whose interrupt flag should be tested. * * \return Boolean \c true if the specified pipe has interrupted, \c false otherwise. */ - static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) { - return ((UPINT & (1 << PipeNumber)) ? true : false); + return ((UPINT & (1 << (Address & PIPE_PIPENUM_MASK))) ? true : false); } /** Unfreezes the selected pipe, allowing it to communicate with an attached device. */ @@ -810,8 +805,22 @@ extern uint8_t USB_Host_ControlPipeSize; /* Function Prototypes: */ - /** Configures the specified pipe number with the given pipe type, token, target endpoint number in the - * attached device, bank size and banking mode. + /** Configures a table of pipe descriptions, in sequence. This function can be used to configure multiple + * pipes at the same time. + * + * \note Pipe with a zero address will be ignored, thus this function cannot be used to configure the + * control pipe. + * + * \param[in] Table Pointer to a table of pipe descriptions. + * \param[in] Entries Number of entries in the pipe table to configure. + * + * \return Boolean \c true if all pipes configured successfully, \c false otherwise. + */ + bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table, + const uint8_t Entries); + + /** Configures the specified pipe address with the given pipe type, endpoint address within the attached device, bank size + * and number of hardware banks. * * A newly configured pipe is frozen by default, and must be unfrozen before use via the \ref Pipe_Unfreeze() * before being used. Pipes should be kept frozen unless waiting for data from a device while in IN mode, or @@ -819,25 +828,19 @@ * numbers of IN requests without automatic freezing - this can be overridden by a call to * \ref Pipe_SetFiniteINRequests(). * - * \param[in] Number Pipe number to configure. This must be more than 0 and less than \ref PIPE_TOTAL_PIPES. - * - * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low - * Speed USB devices - refer to the USB 2.0 specification. + * \param[in] Address Pipe address to configure. * - * \param[in] Token Pipe data token, either \ref PIPE_TOKEN_SETUP, \ref PIPE_TOKEN_OUT or \ref PIPE_TOKEN_IN. - * All pipes (except Control type) are unidirectional - data may only be read from or - * written to the pipe bank based on its direction, not both. + * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low + * Speed USB devices - refer to the USB 2.0 specification. * - * \param[in] EndpointNumber Endpoint index within the attached device that the pipe should interface to. + * \param[in] EndpointAddress Endpoint address within the attached device that the pipe should interface to. * - * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to - * the USB device, or after they have been received from the USB device (depending on - * the pipe's data direction). The bank size must indicate the maximum packet size that - * the pipe can handle. + * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to + * the USB device, or after they have been received from the USB device (depending on + * the pipe's data direction). The bank size must indicate the maximum packet size that + * the pipe can handle. * - * \param[in] Banks Number of banks to use for the pipe being configured, a \c PIPE_BANK_* mask. More banks - * uses more USB DPRAM, but offers better performance. Isochronous type pipes <b>must</b> - * have at least two banks. + * \param[in] Banks Number of banks to use for the pipe being configured. * * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Pipes <b>must</b> be configured in ascending order, * or bank corruption will occur. @@ -855,10 +858,9 @@ * * \return Boolean \c true if the configuration succeeded, \c false otherwise. */ - bool Pipe_ConfigurePipe(const uint8_t Number, + bool Pipe_ConfigurePipe(const uint8_t Address, const uint8_t Type, - const uint8_t Token, - const uint8_t EndpointNumber, + const uint8_t EndpointAddress, const uint16_t Size, const uint8_t Banks); diff --git a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c index e31b88d5f..1f37dfd49 100644 --- a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c +++ b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c @@ -232,8 +232,7 @@ static void USB_Init_Device(void) #endif Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, - ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize, - ENDPOINT_BANK_SINGLE); + USB_Device_ControlEndpointSize, 1); USB_INT_Clear(USB_INT_SUSPI); USB_INT_Enable(USB_INT_SUSPI); diff --git a/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c index f63cf3eb9..e26c86f12 100644 --- a/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c +++ b/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c @@ -171,8 +171,7 @@ ISR(USB_GEN_vect, ISR_BLOCK) USB_INT_Enable(USB_INT_WAKEUPI); Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, - ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize, - ENDPOINT_BANK_SINGLE); + USB_Device_ControlEndpointSize, 1); #if defined(INTERRUPT_CONTROL_ENDPOINT) USB_INT_Enable(USB_INT_RXSTPI); diff --git a/LUFA/Drivers/USB/Core/Endpoint.h b/LUFA/Drivers/USB/Core/Endpoint.h index 1fcc6b6f3..b349adfc9 100644 --- a/LUFA/Drivers/USB/Core/Endpoint.h +++ b/LUFA/Drivers/USB/Core/Endpoint.h @@ -87,6 +87,18 @@ #endif /* Public Interface - May be used in end-application: */ + /* Type Defines: */ + /** Type define for a endpoint table entry, used to configure endpoints in groups via + * \ref Endpoint_ConfigureEndpointTable(). + */ + typedef struct + { + uint8_t Address; /**< Address of the endpoint to configure, or zero if the table entry is to be unused. */ + uint16_t Size; /**< Size of the endpoint bank, in bytes. */ + uint8_t Type; /**< Type of the endpoint, a \c EP_TYPE_* mask. */ + uint8_t Banks; /**< Number of hardware banks to use for the endpoint. */ + } USB_Endpoint_Table_t; + /* Macros: */ /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's * numerical address in the device. diff --git a/LUFA/Drivers/USB/Core/Pipe.h b/LUFA/Drivers/USB/Core/Pipe.h index bb56b8102..faa803b6d 100644 --- a/LUFA/Drivers/USB/Core/Pipe.h +++ b/LUFA/Drivers/USB/Core/Pipe.h @@ -97,6 +97,19 @@ #endif /* Public Interface - May be used in end-application: */ + /* Type Defines: */ + /** Type define for a pipe table entry, used to configure pipes in groups via + * \ref Pipe_ConfigurePipeTable(). + */ + typedef struct + { + uint8_t Address; /**< Address of the pipe to configure, or zero if the table entry is to be unused. */ + uint16_t Size; /**< Size of the pipe bank, in bytes. */ + uint8_t EndpointAddress; /** Address of the endpoint in the connected device. */ + uint8_t Type; /**< Type of the endpoint, a \c EP_TYPE_* mask. */ + uint8_t Banks; /**< Number of hardware banks to use for the pipe. */ + } USB_Pipe_Table_t; + /* Macros: */ /** Pipe address for the default control pipe, which always resides in address 0. This is * defined for convenience to give more readable code when used with the pipe macros. @@ -113,11 +126,6 @@ */ #define PIPE_EPNUM_MASK 0x0F - /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's - * direction for comparing with the \c ENDPOINT_DIR_* masks. - */ - #define PIPE_EPDIR_MASK 0x80 - /* Architecture Includes: */ #if (ARCH == ARCH_AVR8) #include "AVR8/Pipe_AVR8.h" diff --git a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c index fc1b18a2e..c027585a6 100644 --- a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c +++ b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c @@ -45,6 +45,23 @@ uint8_t USB_Device_ControlEndpointSize = ENDPOINT_CONTROLEP_DEFAULT_SIZE; volatile uint32_t USB_Endpoint_SelectedEndpoint = ENDPOINT_CONTROLEP; volatile uint8_t* USB_Endpoint_FIFOPos[ENDPOINT_TOTAL_ENDPOINTS]; +bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Endpoint_ConfigureEndpoint(Table[i].Address, Table[i].Type, Table[i].Size, Table[i].Banks))) + { + return false; + } + } + + return true; +} + bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number, const uint32_t UECFG0Data) { diff --git a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h index c919effa7..84801a13f 100644 --- a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h @@ -90,47 +90,6 @@ /* Private Interface - For use in library only: */ #if !defined(__DOXYGEN__) /* Macros: */ - #define _ENDPOINT_GET_MAXSIZE(EPIndex) _ENDPOINT_GET_MAXSIZE2(ENDPOINT_DETAILS_EP ## EPIndex) - #define _ENDPOINT_GET_MAXSIZE2(EPDetails) _ENDPOINT_GET_MAXSIZE3(EPDetails) - #define _ENDPOINT_GET_MAXSIZE3(MaxSize, Banks) (MaxSize) - - #define _ENDPOINT_GET_BANKS(EPIndex) _ENDPOINT_GET_BANKS2(ENDPOINT_DETAILS_EP ## EPIndex) - #define _ENDPOINT_GET_BANKS2(EPDetails) _ENDPOINT_GET_BANKS3(EPDetails) - #define _ENDPOINT_GET_BANKS3(MaxSize, Banks) (Banks) - - #if defined(USB_SERIES_UC3A0_AVR32) || defined(USB_SERIES_UC3A1_AVR32) - #define ENDPOINT_DETAILS_MAXEP 7 - - #define ENDPOINT_DETAILS_EP0 64, 1 - #define ENDPOINT_DETAILS_EP1 256, 2 - #define ENDPOINT_DETAILS_EP2 256, 2 - #define ENDPOINT_DETAILS_EP3 64, 2 - #define ENDPOINT_DETAILS_EP4 64, 2 - #define ENDPOINT_DETAILS_EP5 256, 2 - #define ENDPOINT_DETAILS_EP6 256, 2 - #elif defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) - #define ENDPOINT_DETAILS_MAXEP 8 - - #define ENDPOINT_DETAILS_EP0 64, 1 - #define ENDPOINT_DETAILS_EP1 512, 3 - #define ENDPOINT_DETAILS_EP2 512, 3 - #define ENDPOINT_DETAILS_EP3 512, 3 - #define ENDPOINT_DETAILS_EP4 512, 3 - #define ENDPOINT_DETAILS_EP5 512, 3 - #define ENDPOINT_DETAILS_EP6 512, 3 - #define ENDPOINT_DETAILS_EP7 512, 3 - #elif defined(USB_SERIES_UC3B0_AVR32) || defined(USB_SERIES_UC3B1_AVR32) - #define ENDPOINT_DETAILS_MAXEP 7 - - #define ENDPOINT_DETAILS_EP0 64, 1 - #define ENDPOINT_DETAILS_EP1 64, 2 - #define ENDPOINT_DETAILS_EP2 64, 2 - #define ENDPOINT_DETAILS_EP3 64, 2 - #define ENDPOINT_DETAILS_EP4 64, 2 - #define ENDPOINT_DETAILS_EP5 256, 2 - #define ENDPOINT_DETAILS_EP6 256, 2 - #endif - #define ENDPOINT_HSB_ADDRESS_SPACE_SIZE (64 * 1024UL) /* Inline Functions: */ @@ -162,34 +121,6 @@ /* Public Interface - May be used in end-application: */ /* Macros: */ - /** \name Endpoint Bank Mode Masks */ - //@{ - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have one single bank, which requires less USB FIFO memory but results - * in slower transfers as only one USB device (the AVR or the host) can access the endpoint's - * bank at the one time. - */ - #define ENDPOINT_BANK_SINGLE AVR32_USBB_UECFG0_EPBK_SINGLE - - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have two banks, which requires more USB FIFO memory but results - * in faster transfers as one USB device (the AVR or the host) can access one bank while the other - * accesses the second bank. - */ - #define ENDPOINT_BANK_DOUBLE AVR32_USBB_UECFG0_EPBK_DOUBLE - - #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) || defined(__DOXYGEN__) - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have three banks, which requires more USB FIFO memory but results - * in faster transfers as one USB device (the AVR or the host) can access one bank while the other - * accesses the remaining banks. - * - * \note Not available on all AVR models. - */ - #define ENDPOINT_BANK_TRIPLE AVR32_USBB_UECFG0_EPBK_TRIPLE - #endif - //@} - #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined. @@ -197,30 +128,16 @@ #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8 #endif - /** Retrieves the maximum bank size in bytes of a given endpoint. - * - * \attention This macro will only work correctly on endpoint indexes that are compile-time constants - * defined by the preprocessor. - * - * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) - */ - #define ENDPOINT_MAX_SIZE(EPIndex) _ENDPOINT_GET_MAXSIZE(EPIndex) - - /** Retrieves the total number of banks supported by the given endpoint. - * - * \attention This macro will only work correctly on endpoint indexes that are compile-time constants - * defined by the preprocessor. - * - * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) - */ - #define ENDPOINT_BANKS_SUPPORTED(EPIndex) _ENDPOINT_GET_BANKS(EPIndex) - #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__) - /** Total number of endpoints (including the default control endpoint at address 0) which may - * be used in the device. Different AVR models support different amounts of endpoints, - * this value reflects the maximum number of endpoints for the currently selected AVR model. - */ - #define ENDPOINT_TOTAL_ENDPOINTS ENDPOINT_DETAILS_MAXEP + #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) + #define ENDPOINT_TOTAL_ENDPOINTS 8 + #else + /** Total number of endpoints (including the default control endpoint at address 0) which may + * be used in the device. Different AVR models support different amounts of endpoints, + * this value reflects the maximum number of endpoints for the currently selected AVR model. + */ + #define ENDPOINT_TOTAL_ENDPOINTS 7 + #endif #else #define ENDPOINT_TOTAL_ENDPOINTS 1 #endif @@ -250,28 +167,21 @@ }; /* Inline Functions: */ - /** Configures the specified endpoint number with the given endpoint type, direction, bank size + /** Configures the specified endpoint address with the given endpoint type, direction, bank size * and banking mode. Once configured, the endpoint may be read from or written to, depending * on its direction. * - * \param[in] Number Endpoint number to configure. This must be more than 0 and less than - * \ref ENDPOINT_TOTAL_ENDPOINTS. + * \param[in] Address Endpoint address to configure. * * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types * are available on Low Speed USB devices - refer to the USB 2.0 specification. * - * \param[in] Direction Endpoint data direction, either \ref ENDPOINT_DIR_OUT or \ref ENDPOINT_DIR_IN. - * All endpoints (except Control type) are unidirectional - data may only be read - * from or written to the endpoint bank based on its direction, not both. - * * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted * to the USB host, or after they have been received from the USB host (depending on * the endpoint's data direction). The bank size must indicate the maximum packet size * that the endpoint can handle. * - * \param[in] Banks Number of banks to use for the endpoint being configured, an \c ENDPOINT_BANK_* mask. - * More banks uses more USB DPRAM, but offers better performance. Isochronous type - * endpoints <b>must</b> have at least two banks. + * \param[in] Banks Number of hardware banks to use for the endpoint being configured. * * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints <b>must</b> be configured in * ascending order, or bank corruption will occur. @@ -289,22 +199,21 @@ * * \return Boolean \c true if the configuration succeeded, \c false otherwise. */ - static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, const uint8_t Type, - const uint8_t Direction, const uint16_t Size, const uint8_t Banks) ATTR_ALWAYS_INLINE; - static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, const uint8_t Type, - const uint8_t Direction, const uint16_t Size, const uint8_t Banks) { - return Endpoint_ConfigureEndpoint_Prv(Number, (AVR32_USBB_ALLOC_MASK | - ((uint32_t)Type << AVR32_USBB_EPTYPE_OFFSET) | - ((uint32_t)(Direction ? AVR32_USBB_UECFG0_EPDIR_MASK : 0) | - ((uint32_t)Banks << AVR32_USBB_EPBK_OFFSET) | - Endpoint_BytesToEPSizeMask(Size)))); + return Endpoint_ConfigureEndpoint_Prv((Address & ENDPOINT_EPNUM_MASK), + (AVR32_USBB_ALLOC_MASK | + ((uint32_t)Type << AVR32_USBB_EPTYPE_OFFSET) | + ((uint32_t)(Address & ENDPOINT_DIR_IN) ? AVR32_USBB_UECFG0_EPDIR_MASK : 0) | + ((uint32_t)Banks << AVR32_USBB_EPBK_OFFSET) | + Endpoint_BytesToEPSizeMask(Size))); } /** Indicates the number of bytes currently stored in the current endpoint's selected bank. @@ -319,41 +228,51 @@ return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].byct; } + /** Determines the currently selected endpoint's direction. + * + * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask. + */ + static inline uint32_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_GetEndpointDirection(void) + { + return ((&AVR32_USBB.UECFG0)[USB_Endpoint_SelectedEndpoint].epdir ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT); + } + /** Get the endpoint address of the currently selected endpoint. This is typically used to save - * the currently selected endpoint number so that it can be restored after another endpoint has - * been manipulated. + * the currently selected endpoint so that it can be restored after another endpoint has been + * manipulated. * * \return Index of the currently selected endpoint. */ static inline uint8_t Endpoint_GetCurrentEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; static inline uint8_t Endpoint_GetCurrentEndpoint(void) { - return USB_Endpoint_SelectedEndpoint; + return (USB_Endpoint_SelectedEndpoint | Endpoint_GetEndpointDirection()); } - /** Selects the given endpoint number. If the address from the device descriptors is used, the - * value should be masked with the \ref ENDPOINT_EPNUM_MASK constant to extract only the endpoint - * number (and discarding the endpoint direction bit). + /** Selects the given endpoint address. * - * Any endpoint operations which do not require the endpoint number to be indicated will operate on + * Any endpoint operations which do not require the endpoint address to be indicated will operate on * the currently selected endpoint. * - * \param[in] EndpointNumber Endpoint number to select. + * \param[in] Address Endpoint address to select. */ - static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; - static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) + static inline void Endpoint_SelectEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_SelectEndpoint(const uint8_t Address) { - USB_Endpoint_SelectedEndpoint = EndpointNumber; + USB_Endpoint_SelectedEndpoint = (Address & ENDPOINT_EPNUM_MASK); } /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's * data In and Out pointers to the bank's contents. * - * \param[in] EndpointNumber Endpoint number whose FIFO buffers are to be reset. + * \param[in] Address Endpoint number whose FIFO buffers are to be reset. */ - static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; - static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) + static inline void Endpoint_ResetEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetEndpoint(const uint8_t Address) { + uint32_t EndpointNumber = (Address & ENDPOINT_EPNUM_MASK); + AVR32_USBB.uerst |= (AVR32_USBB_EPRST0_MASK << EndpointNumber); AVR32_USBB.uerst &= ~(AVR32_USBB_EPRST0_MASK << EndpointNumber); USB_Endpoint_FIFOPos[EndpointNumber] = &AVR32_USBB_SLAVE[EndpointNumber * ENDPOINT_HSB_ADDRESS_SPACE_SIZE]; @@ -452,8 +371,8 @@ * * \return Mask whose bits indicate which endpoints have interrupted. */ - static inline uint8_t Endpoint_GetEndpointInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline uint8_t Endpoint_GetEndpointInterrupts(void) + static inline uint32_t Endpoint_GetEndpointInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_GetEndpointInterrupts(void) { return ((AVR32_USBB.udint & (AVR32_USBB_EP6INT_MASK | AVR32_USBB_EP5INT_MASK | AVR32_USBB_EP4INT_MASK | AVR32_USBB_EP3INT_MASK | @@ -464,14 +383,14 @@ /** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type * endpoints). * - * \param[in] EndpointNumber Index of the endpoint whose interrupt flag should be tested. + * \param[in] Address Address of the endpoint whose interrupt flag should be tested. * * \return Boolean \c true if the specified endpoint has interrupted, \c false otherwise. */ - static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) { - return ((Endpoint_GetEndpointInterrupts() & (AVR32_USBB_EP0INT_MASK << EndpointNumber)) ? true : false); + return ((Endpoint_GetEndpointInterrupts() & (AVR32_USBB_EP0INT_MASK << (Address & ENDPOINT_EPNUM_MASK))) ? true : false); } /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host. @@ -596,16 +515,6 @@ (&AVR32_USBB.UECON0SET)[USB_Endpoint_SelectedEndpoint].rstdts = true; } - /** Determines the currently selected endpoint's direction. - * - * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask. - */ - static inline uint32_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline uint32_t Endpoint_GetEndpointDirection(void) - { - return ((&AVR32_USBB.UECFG0)[USB_Endpoint_SelectedEndpoint].epdir ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT); - } - /** Sets the direction of the currently selected endpoint. * * \param[in] DirectionMask New endpoint direction, as a \c ENDPOINT_DIR_* mask. @@ -837,6 +746,20 @@ #endif /* Function Prototypes: */ + /** Configures a table of endpoint descriptions, in sequence. This function can be used to configure multiple + * endpoints at the same time. + * + * \note Endpoints with a zero address will be ignored, thus this function cannot be used to configure the + * control endpoint. + * + * \param[in] Table Pointer to a table of endpoint descriptions. + * \param[in] Entries Number of entries in the endpoint table to configure. + * + * \return Boolean \c true if all endpoints configured successfully, \c false otherwise. + */ + bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries); + /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, * with respect to the data direction. This is a convenience function which can be used to * simplify user control request handling. diff --git a/LUFA/Drivers/USB/Core/UC3/Host_UC3.c b/LUFA/Drivers/USB/Core/UC3/Host_UC3.c index 49d43f9b5..932381a14 100644 --- a/LUFA/Drivers/USB/Core/UC3/Host_UC3.c +++ b/LUFA/Drivers/USB/Core/UC3/Host_UC3.c @@ -114,9 +114,7 @@ void USB_Host_ProcessNextHostState(void) HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe); break; case HOST_STATE_Powered_ConfigPipe: - if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, - PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP, - PIPE_CONTROLPIPE_DEFAULT_SIZE, PIPE_BANK_SINGLE))) + if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, PIPE_CONTROLPIPE_DEFAULT_SIZE, 1))) { ErrorCode = HOST_ENUMERROR_PipeConfigError; SubErrorCode = 0; @@ -151,9 +149,7 @@ void USB_Host_ProcessNextHostState(void) HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset); break; case HOST_STATE_Default_PostReset: - if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, - PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP, - USB_Host_ControlPipeSize, PIPE_BANK_SINGLE))) + if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, USB_Host_ControlPipeSize, 1))) { ErrorCode = HOST_ENUMERROR_PipeConfigError; SubErrorCode = 0; diff --git a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c index 4e77a28ff..787244b97 100644 --- a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c +++ b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c @@ -43,13 +43,35 @@ uint8_t USB_Host_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE; volatile uint32_t USB_Pipe_SelectedPipe = PIPE_CONTROLPIPE; volatile uint8_t* USB_Pipe_FIFOPos[PIPE_TOTAL_PIPES]; -bool Pipe_ConfigurePipe(const uint8_t Number, +bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Pipe_ConfigurePipe(Table[i].Address, Table[i].Type, Table[i].EndpointAddress, Table[i].Size, Table[i].Banks))) + { + return false; + } + } + + return true; +} + +bool Pipe_ConfigurePipe(const uint8_t Address, const uint8_t Type, - const uint8_t Token, - const uint8_t EndpointNumber, + const uint8_t EndpointAddress, const uint16_t Size, const uint8_t Banks) { + uint8_t Number = (Address & PIPE_EPNUM_MASK); + uint8_t Token = (Address & PIPE_DIR_IN) ? PIPE_TOKEN_IN : PIPE_TOKEN_OUT; + + if (Type == EP_TYPE_CONTROL) + Token = PIPE_TOKEN_SETUP; + USB_Pipe_FIFOPos[Number] = &AVR32_USBB_SLAVE[Number * 0x10000]; #if defined(ORDERED_EP_CONFIG) @@ -60,7 +82,7 @@ bool Pipe_ConfigurePipe(const uint8_t Number, (&AVR32_USBB.upcfg0)[Number] = (AVR32_USBB_ALLOC_MASK | ((uint32_t)Type << AVR32_USBB_PTYPE_OFFSET) | ((uint32_t)Token << AVR32_USBB_PTOKEN_OFFSET) | - ((uint32_t)Banks << AVR32_USBB_PBK_OFFSET) | + ((Banks > 1) ? AVR32_USBB_PBK_MASK : 0) | Pipe_BytesToEPSizeMask(Size) | ((EndpointNumber & PIPE_EPNUM_MASK) << AVR32_USBB_PEPNUM_OFFSET)); @@ -79,9 +101,9 @@ bool Pipe_ConfigurePipe(const uint8_t Number, UPCFG0Temp = (AVR32_USBB_ALLOC_MASK | ((uint32_t)Type << AVR32_USBB_PTYPE_OFFSET) | ((uint32_t)Token << AVR32_USBB_PTOKEN_OFFSET) | - ((uint32_t)Banks << AVR32_USBB_PBK_OFFSET) | + ((Banks > 1) ? AVR32_USBB_PBK_MASK : 0) | Pipe_BytesToEPSizeMask(Size) | - ((EndpointNumber & PIPE_EPNUM_MASK) << AVR32_USBB_PEPNUM_OFFSET)); + ((EndpointAddress & PIPE_EPNUM_MASK) << AVR32_USBB_PEPNUM_OFFSET)); } else { diff --git a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h index f17fa5376..837afe8b8 100644 --- a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h @@ -131,49 +131,22 @@ /** \name Pipe Token Masks */ //@{ - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a SETUP token (for CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a SETUP token (for CONTROL type pipes), * which will trigger a control request on the attached device when data is written to the pipe. */ #define PIPE_TOKEN_SETUP AVR32_USBB_UPCFG0_PTOKEN_SETUP - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a IN token (for non-CONTROL type pipes), * indicating that the pipe data will flow from device to host. */ #define PIPE_TOKEN_IN AVR32_USBB_UPCFG0_PTOKEN_IN - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a OUT token (for non-CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a OUT token (for non-CONTROL type pipes), * indicating that the pipe data will flow from host to device. */ #define PIPE_TOKEN_OUT AVR32_USBB_UPCFG0_PTOKEN_OUT //@} - /** \name Pipe Bank Mode Masks */ - //@{ - /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe - * should have one single bank, which requires less USB FIFO memory but results in slower transfers as - * only one USB device (the AVR or the attached device) can access the pipe's bank at the one time. - */ - #define PIPE_BANK_SINGLE AVR32_USBB_UPCFG0_PBK_SINGLE - - /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe - * should have two banks, which requires more USB FIFO memory but results in faster transfers as one - * USB device (the AVR or the attached device) can access one bank while the other accesses the second - * bank. - */ - #define PIPE_BANK_DOUBLE AVR32_USBB_UPCFG0_PBK_DOUBLE - - #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) || defined(__DOXYGEN__) - /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the - * pipe should have three banks, which requires more USB FIFO memory but results in faster transfers - * as one USB device (the AVR or the attached device) can access one bank while the other accesses the - * remaining banks. - * - * \note Not available on all AVR models. - */ - #define PIPE_BANK_TRIPLE AVR32_USBB_UPCFG0_PBK_TRIPLE - #endif - //@} - /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value * in the device descriptor of the attached device. */ @@ -224,6 +197,16 @@ return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].pbyct; } + /** Determines the currently selected pipe's direction. + * + * \return The currently selected pipe's direction, as a \c PIPE_DIR_* mask. + */ + static inline uint8_t Pipe_GetPipeDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeDirection(void) + { + return (((&AVR32_USBB.UPCFG0)[USB_Endpoint_SelectedEndpoint].ptoken == PIPE_TOKEN_OUT) ? PIPE_DIR_OUT : PIPE_DIR_IN); + } + /** Returns the pipe address of the currently selected pipe. This is typically used to save the * currently selected pipe number so that it can be restored after another pipe has been manipulated. * @@ -232,30 +215,32 @@ static inline uint8_t Pipe_GetCurrentPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; static inline uint8_t Pipe_GetCurrentPipe(void) { - return USB_Pipe_SelectedPipe; + return (USB_Pipe_SelectedPipe | Pipe_GetPipeDirection()); } - /** Selects the given pipe number. Any pipe operations which do not require the pipe number to be + /** Selects the given pipe address. Any pipe operations which do not require the pipe address to be * indicated will operate on the currently selected pipe. * - * \param[in] PipeNumber Index of the pipe to select. + * \param[in] Address Address of the pipe to select. */ - static inline void Pipe_SelectPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; - static inline void Pipe_SelectPipe(const uint8_t PipeNumber) + static inline void Pipe_SelectPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_SelectPipe(const uint8_t Address) { - USB_Pipe_SelectedPipe = PipeNumber; + USB_Pipe_SelectedPipe = (Address & PIPE_EPNUM_MASK); } /** Resets the desired pipe, including the pipe banks and flags. * - * \param[in] PipeNumber Index of the pipe to reset. + * \param[in] Address Index of the pipe to reset. */ - static inline void Pipe_ResetPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; - static inline void Pipe_ResetPipe(const uint8_t PipeNumber) + static inline void Pipe_ResetPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_ResetPipe(const uint8_t Address) { + uint32_t PipeNumber = (Address & PIPE_EPNUM_MASK); + AVR32_USBB.uprst |= (AVR32_USBB_PRST0_MASK << PipeNumber); AVR32_USBB.uprst &= ~(AVR32_USBB_PRST0_MASK << PipeNumber); - USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe] = &AVR32_USBB_SLAVE[USB_Pipe_SelectedPipe * PIPE_HSB_ADDRESS_SPACE_SIZE]; + USB_Pipe_FIFOPos[PipeNumber] = &AVR32_USBB_SLAVE[PipeNumber * PIPE_HSB_ADDRESS_SPACE_SIZE]; } /** Enables the currently selected pipe so that data can be sent and received through it to and from @@ -349,7 +334,7 @@ static inline uint8_t Pipe_GetBoundEndpointAddress(void) { return ((&AVR32_USBB.UPCFG0)[USB_Pipe_SelectedPipe].pepnum | - ((Pipe_GetPipeToken() == PIPE_TOKEN_IN) ? PIPE_EPDIR_MASK : 0)); + ((Pipe_GetPipeToken() == PIPE_TOKEN_IN) ? PIPE_DIR_IN : PIPE_DIR_OUT)); } /** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds. @@ -376,17 +361,17 @@ AVR32_USBB_P0INT_MASK)) >> AVR32_USBB_P0INT_OFFSET); } - /** Determines if the specified pipe number has interrupted (valid only for INTERRUPT type + /** Determines if the specified pipe address has interrupted (valid only for INTERRUPT type * pipes). * - * \param[in] PipeNumber Index of the pipe whose interrupt flag should be tested. + * \param[in] Address Address of the pipe whose interrupt flag should be tested. * * \return Boolean \c true if the specified pipe has interrupted, \c false otherwise. */ - static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) { - return ((AVR32_USBB.uhint & (AVR32_USBB_P0INTES_MASK << PipeNumber)) ? true : false); + return ((AVR32_USBB.uhint & (AVR32_USBB_P0INTES_MASK << (Address & PIPE_EPNUM_MASK))) ? true : false); } /** Unfreezes the selected pipe, allowing it to communicate with an attached device. */ @@ -821,8 +806,22 @@ extern uint8_t USB_Host_ControlPipeSize; /* Function Prototypes: */ - /** Configures the specified pipe number with the given pipe type, token, target endpoint number in the - * attached device, bank size and banking mode. + /** Configures a table of pipe descriptions, in sequence. This function can be used to configure multiple + * pipes at the same time. + * + * \note Pipe with a zero address will be ignored, thus this function cannot be used to configure the + * control pipe. + * + * \param[in] Table Pointer to a table of pipe descriptions. + * \param[in] Entries Number of entries in the pipe table to configure. + * + * \return Boolean \c true if all pipes configured successfully, \c false otherwise. + */ + bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table, + const uint8_t Entries); + + /** Configures the specified pipe address with the given pipe type, endpoint address within the attached device, bank size + * and number of hardware banks. * * A newly configured pipe is frozen by default, and must be unfrozen before use via the \ref Pipe_Unfreeze() * before being used. Pipes should be kept frozen unless waiting for data from a device while in IN mode, or @@ -830,25 +829,19 @@ * numbers of IN requests without automatic freezing - this can be overridden by a call to * \ref Pipe_SetFiniteINRequests(). * - * \param[in] Number Pipe number to configure. This must be more than 0 and less than \ref PIPE_TOTAL_PIPES. - * - * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low - * Speed USB devices - refer to the USB 2.0 specification. + * \param[in] Address Pipe address to configure. * - * \param[in] Token Pipe data token, either \ref PIPE_TOKEN_SETUP, \ref PIPE_TOKEN_OUT or \ref PIPE_TOKEN_IN. - * All pipes (except Control type) are unidirectional - data may only be read from or - * written to the pipe bank based on its direction, not both. + * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low + * Speed USB devices - refer to the USB 2.0 specification. * - * \param[in] EndpointNumber Endpoint index within the attached device that the pipe should interface to. + * \param[in] EndpointAddress Endpoint address within the attached device that the pipe should interface to. * - * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to - * the USB device, or after they have been received from the USB device (depending on - * the pipe's data direction). The bank size must indicate the maximum packet size that - * the pipe can handle. + * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to + * the USB device, or after they have been received from the USB device (depending on + * the pipe's data direction). The bank size must indicate the maximum packet size that + * the pipe can handle. * - * \param[in] Banks Number of banks to use for the pipe being configured, a \c PIPE_BANK_* mask. More banks - * uses more USB DPRAM, but offers better performance. Isochronous type pipes <b>must</b> - * have at least two banks. + * \param[in] Banks Number of banks to use for the pipe being configured. * * \note When the \c ORDERED_EP_CONFIG compile time option is used, Pipes <b>must</b> be configured in ascending order, * or bank corruption will occur. @@ -867,10 +860,9 @@ * * \return Boolean \c true if the configuration succeeded, \c false otherwise. */ - bool Pipe_ConfigurePipe(const uint8_t Number, + bool Pipe_ConfigurePipe(const uint8_t Address, const uint8_t Type, - const uint8_t Token, - const uint8_t EndpointNumber, + const uint8_t EndpointAddress, const uint16_t Size, const uint8_t Banks); diff --git a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c index 95ca7d9aa..32772446e 100644 --- a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c +++ b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c @@ -191,8 +191,7 @@ static void USB_Init_Device(void) USB_INT_Enable(USB_INT_VBUSTI); Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, - ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize, - ENDPOINT_BANK_SINGLE); + USB_Device_ControlEndpointSize, 1); USB_INT_Clear(USB_INT_SUSPI); USB_INT_Enable(USB_INT_SUSPI); diff --git a/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c b/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c index d411a9305..a2a5c4a96 100644 --- a/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c +++ b/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c @@ -121,8 +121,7 @@ ISR(USB_GEN_vect) USB_Device_SetDeviceAddress(0); Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, - ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize, - ENDPOINT_BANK_SINGLE); + USB_Device_ControlEndpointSize, 1); #if defined(INTERRUPT_CONTROL_ENDPOINT) USB_INT_Enable(USB_INT_RXSTPI); diff --git a/LUFA/Drivers/USB/Core/USBController.h b/LUFA/Drivers/USB/Core/USBController.h index a91e18c27..44a10e371 100644 --- a/LUFA/Drivers/USB/Core/USBController.h +++ b/LUFA/Drivers/USB/Core/USBController.h @@ -81,6 +81,24 @@ #define ENDPOINT_DIR_IN 0x80 //@} + /** \name Pipe Direction Masks */ + //@{ + /** Pipe direction mask, for masking against pipe addresses to retrieve the pipe's + * direction for comparing with the \c PIPE_DIR_* masks. + */ + #define PIPE_DIR_MASK 0x80 + + /** Endpoint address direction mask for an OUT direction (Host to Device) endpoint. This may be ORed with + * the index of the address within a device to obtain the full endpoint address. + */ + #define PIPE_DIR_OUT 0x00 + + /** Endpoint address direction mask for an IN direction (Device to Host) endpoint. This may be ORed with + * the index of the address within a device to obtain the full endpoint address. + */ + #define PIPE_DIR_IN 0x80 + //@} + /** \name Endpoint/Pipe Type Masks */ //@{ /** Mask for determining the type of an endpoint from an endpoint descriptor. This should then be compared diff --git a/LUFA/Drivers/USB/Core/USBMode.h b/LUFA/Drivers/USB/Core/USBMode.h index bc2f86dd5..56e5b5e84 100644 --- a/LUFA/Drivers/USB/Core/USBMode.h +++ b/LUFA/Drivers/USB/Core/USBMode.h @@ -137,6 +137,16 @@ */ #define USB_SERIES_B3_XMEGA + /** Indicates that the target AVR microcontroller belongs to the XMEGA C3 Series USB controller + * (i.e. ATXMEGA*C3) when defined. + */ + #define USB_SERIES_C3_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA C4 Series USB controller + * (i.e. ATXMEGA*C4) when defined. + */ + #define USB_SERIES_C4_XMEGA + /** Indicates that the target microcontroller and compilation settings allow for the * target to be configured in USB Device mode when defined. */ @@ -219,6 +229,13 @@ #elif (defined(__AVR_ATxmega128B3__) || defined(__AVR_ATxmega64B3__)) #define USB_SERIES_B3_XMEGA #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega128C3__) || defined(__AVR_ATxmega64C3__) || \ + defined(__AVR_ATxmega192C3__) || defined(__AVR_ATxmega256C3__)) + #define USB_SERIES_C3_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega16C4__) || defined(__AVR_ATxmega32C4__)) + #define USB_SERIES_C4_XMEGA + #define USB_CAN_BE_DEVICE #endif #if (defined(USB_CAN_BE_DEVICE) && defined(USB_CAN_BE_HOST)) diff --git a/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h index 85be0f1bf..268fe95c0 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h +++ b/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h @@ -157,7 +157,7 @@ static inline uint16_t USB_Device_GetFrameNumber(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; static inline uint16_t USB_Device_GetFrameNumber(void) { - return USB_EndpointTable.FrameNum; + return ((USB_EndpointTable_t*)USB.EPPTR)->FrameNum; } #if !defined(NO_SOF_EVENTS) diff --git a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c index 98e35e59a..1aeb985f8 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c +++ b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c @@ -48,20 +48,36 @@ volatile uint8_t USB_Endpoint_SelectedEndpoint; volatile USB_EP_t* USB_Endpoint_SelectedHandle; volatile Endpoint_FIFO_t* USB_Endpoint_SelectedFIFO; -bool Endpoint_ConfigureEndpoint_PRV(const uint8_t Number, - const uint8_t Direction, +bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Endpoint_ConfigureEndpoint(Table[i].Address, Table[i].Type, Table[i].Size, Table[i].Banks))) + { + return false; + } + } + + return true; +} + +bool Endpoint_ConfigureEndpoint_PRV(const uint8_t Address, const uint8_t Config, const uint8_t Size) { - Endpoint_SelectEndpoint(Number | Direction); + Endpoint_SelectEndpoint(Address); USB_Endpoint_SelectedHandle->CTRL = 0; - USB_Endpoint_SelectedHandle->STATUS = (Direction == ENDPOINT_DIR_IN) ? USB_EP_BUSNACK0_bm : 0; + USB_Endpoint_SelectedHandle->STATUS = (Address & ENDPOINT_DIR_IN) ? USB_EP_BUSNACK0_bm : 0; USB_Endpoint_SelectedHandle->CTRL = Config; USB_Endpoint_SelectedHandle->CNT = 0; USB_Endpoint_SelectedHandle->DATAPTR = (intptr_t)USB_Endpoint_SelectedFIFO->Data; - USB_Endpoint_SelectedFIFO->Length = (Direction == ENDPOINT_DIR_IN) ? Size : 0; + USB_Endpoint_SelectedFIFO->Length = (Address & ENDPOINT_DIR_IN) ? Size : 0; USB_Endpoint_SelectedFIFO->Position = 0; return true; @@ -71,8 +87,8 @@ void Endpoint_ClearEndpoints(void) { for (uint8_t EPNum = 0; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++) { - USB_EndpointTable.Endpoints[EPNum].IN.CTRL = 0; - USB_EndpointTable.Endpoints[EPNum].OUT.CTRL = 0; + ((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EPNum].IN.CTRL = 0; + ((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EPNum].OUT.CTRL = 0; } } diff --git a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h index 7828f308a..720b5f3b4 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h +++ b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h @@ -88,14 +88,20 @@ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. #endif - /* Private Interface - For use in library only: */ - #if !defined(__DOXYGEN__) + /* Public Interface - May be used in end-application: */ /* Macros: */ - #define _ENDPOINT_GET_MAXSIZE(EPIndex) 1023 - #define _ENDPOINT_GET_BANKS(EPIndex) 2 - - #define ENDPOINT_DETAILS_MAXEP 16 + #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__) + /** Total number of endpoints (including the default control endpoint at address 0) which may + * be used in the device. Different USB AVR models support different amounts of endpoints, + * this value reflects the maximum number of endpoints for the currently selected AVR model. + */ + #define ENDPOINT_TOTAL_ENDPOINTS 16 + #else + #define ENDPOINT_TOTAL_ENDPOINTS 1 + #endif + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) /* Type Defines: */ typedef struct { @@ -112,7 +118,7 @@ } Endpoint_FIFOPair_t; /* External Variables: */ - extern Endpoint_FIFOPair_t USB_Endpoint_FIFOs[ENDPOINT_DETAILS_MAXEP]; + extern Endpoint_FIFOPair_t USB_Endpoint_FIFOs[ENDPOINT_TOTAL_ENDPOINTS]; extern volatile uint8_t USB_Endpoint_SelectedEndpoint; extern volatile USB_EP_t* USB_Endpoint_SelectedHandle; extern volatile Endpoint_FIFO_t* USB_Endpoint_SelectedFIFO; @@ -135,8 +141,7 @@ } /* Function Prototypes: */ - bool Endpoint_ConfigureEndpoint_PRV(const uint8_t Number, - const uint8_t Direction, + bool Endpoint_ConfigureEndpoint_PRV(const uint8_t Address, const uint8_t Config, const uint8_t Size); void Endpoint_ClearEndpoints(void); @@ -144,23 +149,6 @@ /* Public Interface - May be used in end-application: */ /* Macros: */ - /** \name Endpoint Bank Mode Masks */ - //@{ - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have one single bank, which requires less USB FIFO memory but results - * in slower transfers as only one USB device (the AVR or the host) can access the endpoint's - * bank at the one time. - */ - #define ENDPOINT_BANK_SINGLE 0 - - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have two banks, which requires more USB FIFO memory but results - * in faster transfers as one USB device (the AVR or the host) can access one bank while the other - * accesses the second bank. - */ - #define ENDPOINT_BANK_DOUBLE USB_EP_PINGPONG_bm - //@} - #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined. @@ -168,34 +156,6 @@ #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8 #endif - /** Retrieves the maximum bank size in bytes of a given endpoint. - * - * \attention This macro will only work correctly on endpoint indexes that are compile-time constants - * defined by the preprocessor. - * - * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) - */ - #define ENDPOINT_MAX_SIZE(EPIndex) _ENDPOINT_GET_MAXSIZE(EPIndex) - - /** Retrieves the total number of banks supported by the given endpoint. - * - * \attention This macro will only work correctly on endpoint indexes that are compile-time constants - * defined by the preprocessor. - * - * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) - */ - #define ENDPOINT_BANKS_SUPPORTED(EPIndex) _ENDPOINT_GET_BANKS(EPIndex) - - #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__) - /** Total number of endpoints (including the default control endpoint at address 0) which may - * be used in the device. Different USB AVR models support different amounts of endpoints, - * this value reflects the maximum number of endpoints for the currently selected AVR model. - */ - #define ENDPOINT_TOTAL_ENDPOINTS ENDPOINT_DETAILS_MAXEP - #else - #define ENDPOINT_TOTAL_ENDPOINTS 1 - #endif - /* Enums: */ /** Enum for the possible error return codes of the \ref Endpoint_WaitUntilReady() function. * @@ -221,54 +181,47 @@ }; /* Inline Functions: */ - /** Selects the given endpoint number. If the address from the device descriptors is used, the - * value should be masked with the \ref ENDPOINT_EPNUM_MASK constant to extract only the endpoint - * number (and discarding the endpoint direction bit). + /** Selects the given endpoint address. * - * Any endpoint operations which do not require the endpoint number to be indicated will operate on + * Any endpoint operations which do not require the endpoint address to be indicated will operate on * the currently selected endpoint. * - * \param[in] EndpointNumber Endpoint number to select. + * \param[in] Address Endpoint address to select. */ - static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber); - static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) + static inline void Endpoint_SelectEndpoint(const uint8_t Address); + static inline void Endpoint_SelectEndpoint(const uint8_t Address) { - USB_Endpoint_SelectedEndpoint = EndpointNumber; + uint8_t EndpointNumber = (Address & ENDPOINT_EPNUM_MASK); + + USB_Endpoint_SelectedEndpoint = Address; - if (EndpointNumber & ENDPOINT_DIR_IN) + if (Address & ENDPOINT_DIR_IN) { - USB_Endpoint_SelectedFIFO = &USB_Endpoint_FIFOs[EndpointNumber & ENDPOINT_EPNUM_MASK].IN; - USB_Endpoint_SelectedHandle = &USB_EndpointTable.Endpoints[EndpointNumber & ENDPOINT_EPNUM_MASK].IN; + USB_Endpoint_SelectedFIFO = &USB_Endpoint_FIFOs[EndpointNumber].IN; + USB_Endpoint_SelectedHandle = &((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EndpointNumber].IN; } else { - USB_Endpoint_SelectedFIFO = &USB_Endpoint_FIFOs[EndpointNumber & ENDPOINT_EPNUM_MASK].OUT; - USB_Endpoint_SelectedHandle = &USB_EndpointTable.Endpoints[EndpointNumber & ENDPOINT_EPNUM_MASK].OUT; + USB_Endpoint_SelectedFIFO = &USB_Endpoint_FIFOs[EndpointNumber].OUT; + USB_Endpoint_SelectedHandle = &((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EndpointNumber].OUT; } } - /** Configures the specified endpoint number with the given endpoint type, direction, bank size + /** Configures the specified endpoint address with the given endpoint type, direction, bank size * and banking mode. Once configured, the endpoint may be read from or written to, depending * on its direction. * - * \param[in] Number Endpoint number to configure. This must be more than 0 and less than - * \ref ENDPOINT_TOTAL_ENDPOINTS. + * \param[in] Address Endpoint address to configure. * * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types * are available on Low Speed USB devices - refer to the USB 2.0 specification. * - * \param[in] Direction Endpoint data direction, either \ref ENDPOINT_DIR_OUT or \ref ENDPOINT_DIR_IN. - * All endpoints (except Control type) are unidirectional - data may only be read - * from or written to the endpoint bank based on its direction, not both. - * * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted * to the USB host, or after they have been received from the USB host (depending on * the endpoint's data direction). The bank size must indicate the maximum packet size * that the endpoint can handle. * - * \param[in] Banks Number of banks to use for the endpoint being configured, an \c ENDPOINT_BANK_* mask. - * More banks uses more USB DPRAM, but offers better performance. Isochronous type - * endpoints <b>must</b> have at least two banks. + * \param[in] Banks Number of hardware banks to use for the endpoint being configured. * * \note The default control endpoint should not be manually configured by the user application, as * it is automatically configured by the library internally. @@ -278,21 +231,19 @@ * * \return Boolean \c true if the configuration succeeded, \c false otherwise. */ - static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, const uint8_t Type, - const uint8_t Direction, const uint16_t Size, const uint8_t Banks) ATTR_ALWAYS_INLINE; - static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, const uint8_t Type, - const uint8_t Direction, const uint16_t Size, const uint8_t Banks) { - uint8_t EPConfigMask = (USB_EP_INTDSBL_bm | Banks | Endpoint_BytesToEPSizeMask(Size)); + uint8_t EPConfigMask = (USB_EP_INTDSBL_bm | ((Banks > 1) ? USB_EP_PINGPONG_bm : 0) | Endpoint_BytesToEPSizeMask(Size)); // TODO - Fix once limitations are lifted - if ((Banks != ENDPOINT_BANK_SINGLE) || (Size > 64)) + if ((Banks > 1) || (Size > 64)) return false; switch (Type) @@ -309,9 +260,9 @@ } if (Type == EP_TYPE_CONTROL) - Endpoint_ConfigureEndpoint_PRV(Number, (Direction ^ ENDPOINT_DIR_IN), EPConfigMask, Size); + Endpoint_ConfigureEndpoint_PRV(Address ^ ENDPOINT_DIR_IN, EPConfigMask, Size); - return Endpoint_ConfigureEndpoint_PRV(Number, Direction, EPConfigMask, Size); + return Endpoint_ConfigureEndpoint_PRV(Address, EPConfigMask, Size); } /** Indicates the number of bytes currently stored in the current endpoint's selected bank. @@ -327,8 +278,8 @@ } /** Get the endpoint address of the currently selected endpoint. This is typically used to save - * the currently selected endpoint number so that it can be restored after another endpoint has - * been manipulated. + * the currently selected endpoint so that it can be restored after another endpoint has been + * manipulated. * * \return Index of the currently selected endpoint. */ @@ -341,15 +292,15 @@ /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's * data In and Out pointers to the bank's contents. * - * \param[in] EndpointNumber Endpoint number whose FIFO buffers are to be reset. + * \param[in] Address Endpoint address whose FIFO buffers are to be reset. */ - static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; - static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) + static inline void Endpoint_ResetEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetEndpoint(const uint8_t Address) { - if (EndpointNumber & ENDPOINT_DIR_IN) - USB_Endpoint_FIFOs[EndpointNumber & ENDPOINT_EPNUM_MASK].IN.Position = 0; + if (Address & ENDPOINT_DIR_IN) + USB_Endpoint_FIFOs[Address & ENDPOINT_EPNUM_MASK].IN.Position = 0; else - USB_Endpoint_FIFOs[EndpointNumber & ENDPOINT_EPNUM_MASK].OUT.Position = 0; + USB_Endpoint_FIFOs[Address & ENDPOINT_EPNUM_MASK].OUT.Position = 0; } /** Determines if the currently selected endpoint is enabled, but not necessarily configured. @@ -388,10 +339,7 @@ static inline bool Endpoint_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; static inline bool Endpoint_IsReadWriteAllowed(void) { - if (USB_Endpoint_SelectedEndpoint & ENDPOINT_DIR_IN) - return (USB_Endpoint_SelectedFIFO->Position < USB_Endpoint_SelectedFIFO->Length); - else - return (USB_Endpoint_SelectedFIFO->Position > 0); + return (USB_Endpoint_SelectedFIFO->Position < USB_Endpoint_SelectedFIFO->Length); } /** Determines if the currently selected endpoint is configured. @@ -404,32 +352,6 @@ return ((USB_Endpoint_SelectedHandle->CTRL & USB_EP_TYPE_gm) ? true : false); } - /** Returns a mask indicating which INTERRUPT type endpoints have interrupted - i.e. their - * interrupt duration has elapsed. Which endpoints have interrupted can be determined by - * masking the return value against <tt>(1 << <i>{Endpoint Number}</i>)</tt>. - * - * \return Mask whose bits indicate which endpoints have interrupted. - */ - static inline uint8_t Endpoint_GetEndpointInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline uint8_t Endpoint_GetEndpointInterrupts(void) - { - return 0; // TODO - } - - /** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type - * endpoints). - * - * \param[in] EndpointNumber Index of the endpoint whose interrupt flag should be tested. - * - * \return Boolean \c true if the specified endpoint has interrupted, \c false otherwise. - */ - static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) - { - (void)EndpointNumber; - return 0; // TODO - } - /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host. * * \ingroup Group_EndpointPacketManagement_XMEGA @@ -800,6 +722,20 @@ #endif /* Function Prototypes: */ + /** Configures a table of endpoint descriptions, in sequence. This function can be used to configure multiple + * endpoints at the same time. + * + * \note Endpoints with a zero address will be ignored, thus this function cannot be used to configure the + * control endpoint. + * + * \param[in] Table Pointer to a table of endpoint descriptions. + * \param[in] Entries Number of entries in the endpoint table to configure. + * + * \return Boolean \c true if all endpoints configured successfully, \c false otherwise. + */ + bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries); + /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, * with respect to the data direction. This is a convenience function which can be used to * simplify user control request handling. diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c index 387e8e417..ffdca3adf 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c +++ b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c @@ -43,7 +43,8 @@ volatile uint8_t USB_CurrentMode = USB_MODE_None; volatile uint8_t USB_Options; #endif -USB_EndpointTable_t USB_EndpointTable ATTR_ALIGNED(4); +/* Ugly workaround to ensure an aligned table, since __BIGGEST_ALIGNMENT__ == 1 for 8-bit AVR-GCC */ +uint8_t USB_EndpointTable[sizeof(USB_EndpointTable_t) + 1]; void USB_Init( #if defined(USB_CAN_BE_BOTH) @@ -75,8 +76,9 @@ void USB_Init( USB.CAL1 = pgm_read_byte(offsetof(NVM_PROD_SIGNATURES_t, USBCAL1)); NVM.CMD = 0; - USB.EPPTR = (intptr_t)&USB_EndpointTable; - USB.CTRLA = (USB_STFRNUM_bm | USB_MAXEP_gm); + /* Ugly workaround to ensure an aligned table, since __BIGGEST_ALIGNMENT__ == 1 for 8-bit AVR-GCC */ + USB.EPPTR = ((intptr_t)&USB_EndpointTable[1] & ~(1 << 0)); + USB.CTRLA = (USB_STFRNUM_bm | ((ENDPOINT_TOTAL_ENDPOINTS - 1) << USB_MAXEP_gp)); if ((USB_Options & USB_OPT_BUSEVENT_PRIHIGH) == USB_OPT_BUSEVENT_PRIHIGH) USB.INTCTRLA = (3 << USB_INTLVL_gp); @@ -109,7 +111,7 @@ void USB_ResetInterface(void) CLK.USBCTRL = (((F_USB / 48000000) - 1) << CLK_USBPSDIV_gp); if (USB_Options & USB_OPT_PLLCLKSRC) - CLK.USBCTRL |= (CLK_USBSRC_PLL_gc | CLK_USBSEN_bm); + CLK.USBCTRL |= (CLK_USBSRC_PLL_gc | CLK_USBSEN_bm); else CLK.USBCTRL |= (CLK_USBSRC_RC32M_gc | CLK_USBSEN_bm); @@ -172,8 +174,7 @@ static void USB_Init_Device(void) USB_Device_SetFullSpeed(); Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, - ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize, - ENDPOINT_BANK_SINGLE); + USB_Device_ControlEndpointSize, 1); USB_INT_Enable(USB_INT_BUSEVENTI); diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h index 2f14f758a..1cdb6f03c 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h +++ b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h @@ -69,7 +69,7 @@ } ATTR_PACKED USB_EndpointTable_t; /* External Variables: */ - extern USB_EndpointTable_t USB_EndpointTable; + extern uint8_t USB_EndpointTable[]; #endif diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c index b0e52d06e..3554165c1 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c +++ b/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c @@ -97,8 +97,7 @@ ISR(USB_BUSEVENT_vect) Endpoint_ClearEndpoints(); Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, - ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize, - ENDPOINT_BANK_SINGLE); + USB_Device_ControlEndpointSize, 1); EVENT_USB_Device_Reset(); } diff --git a/LUFA/Drivers/USB/USB.h b/LUFA/Drivers/USB/USB.h index 35b285c6d..c99c1d267 100644 --- a/LUFA/Drivers/USB/USB.h +++ b/LUFA/Drivers/USB/USB.h @@ -166,9 +166,12 @@ * .Config = * { * .StreamingInterfaceNumber = 1, - * - * .DataINEndpointNumber = 1, - * .DataINEndpointSize = 256, + * .DataINEndpoint = + * { + * .Address = (ENDPOINT_DIR_IN | 1), + * .Size = 64, + * .Banks = 1, + * }, * }, * }; * \endcode @@ -262,11 +265,18 @@ * { * .Config = * { - * .DataINPipeNumber = 1, - * .DataINPipeDoubleBank = false, - * - * .DataOUTPipeNumber = 2, - * .DataOUTPipeDoubleBank = false, + * .DataINPipe = + * { + * .Address = (PIPE_DIR_IN | 1), + * .Size = 64, + * .Banks = 1, + * }, + * .DataOUTPipe = + * { + * .Address = (PIPE_DIR_OUT | 2), + * .Size = 64, + * .Banks = 1, + * }, * }, * }; * \endcode diff --git a/LUFA/Platform/XMEGA/ClockManagement.h b/LUFA/Platform/XMEGA/ClockManagement.h index dcde7dcdb..9b3b56244 100644 --- a/LUFA/Platform/XMEGA/ClockManagement.h +++ b/LUFA/Platform/XMEGA/ClockManagement.h @@ -53,13 +53,13 @@ * * void main(void) * { - * // Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it - * XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, 32000000); - * XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL, F_CPU); + * // Start the PLL to multiply the 2MHz RC oscillator to F_CPU and switch the CPU core to run from it + * XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU); + * XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL); * - * // Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference + * // Start the 32MHz internal RC oscillator and start the DFLL to increase it to F_USB using the USB SOF as a reference * XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ); - * XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, 48000000); + * XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB); * } * \endcode * @@ -117,6 +117,26 @@ }; /* Inline Functions: */ + /** Write a value to a location protected by the XMEGA CCP protection mechanism. This function uses inline assembly to ensure that + * the protected address is written to within four clock cycles of the CCP key being written. + * + * \param[in] Address Address to write to, a memory address protected by the CCP mechanism + * \param[in] Value Value to write to the protected location + */ + static inline void XMEGACLK_CCP_Write(volatile void* Address, const uint8_t Value) ATTR_ALWAYS_INLINE; + static inline void XMEGACLK_CCP_Write(volatile void* Address, const uint8_t Value) + { + __asm__ __volatile__ ( + "out %0, __zero_reg__" "\n\t" /* Zero RAMPZ using fixed zero value register */ + "movw r30, %1" "\n\t" /* Copy address to Z register pair */ + "out %2, %3" "\n\t" /* Write key to CCP register */ + "st Z, %4" "\n\t" /* Indirectly write value to address */ + : /* No output operands */ + : /* Input operands: */ "m" (RAMPZ), "e" (Address), "m" (CCP), "r" (CCP_IOREG_gc), "r" (Value) + : /* Clobbered registers: */ "r30", "r31" + ); + } + /** Starts the external oscillator of the XMEGA microcontroller, with the given options. This routine blocks until * the oscillator is ready for use. * @@ -219,6 +239,9 @@ if (SourceFreq > Frequency) return false; + + if (MulFactor > 31) + return false; switch (Source) { @@ -355,8 +378,7 @@ uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask(); GlobalInterruptDisable(); - CCP = CCP_IOREG_gc; - CLK_CTRL = ClockSourceMask; + XMEGACLK_CCP_Write(&CLK.CTRL, ClockSourceMask); SetGlobalInterruptMask(CurrentGlobalInt); diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.c b/Projects/AVRISP-MKII/AVRISP-MKII.c index 760193ab0..eaf04cb7a 100644 --- a/Projects/AVRISP-MKII/AVRISP-MKII.c +++ b/Projects/AVRISP-MKII/AVRISP-MKII.c @@ -93,12 +93,10 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup AVRISP Data Endpoint(s) */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1); #if defined(LIBUSB_DRIVER_COMPAT) - ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1); #endif /* Indicate endpoint configuration success or failure */ @@ -114,7 +112,7 @@ void AVRISP_Task(void) V2Params_UpdateParamValues(); - Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPADDR); /* Check to see if a V2 Protocol command has been received */ if (Endpoint_IsOUTReceived()) diff --git a/Projects/AVRISP-MKII/Descriptors.c b/Projects/AVRISP-MKII/Descriptors.c index 12f44f9e2..da57b7113 100644 --- a/Projects/AVRISP-MKII/Descriptors.c +++ b/Projects/AVRISP-MKII/Descriptors.c @@ -106,7 +106,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | AVRISP_DATA_IN_EPNUM), + .EndpointAddress = AVRISP_DATA_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AVRISP_DATA_EPSIZE, .PollingIntervalMS = 0x0A @@ -116,7 +116,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | AVRISP_DATA_OUT_EPNUM), + .EndpointAddress = AVRISP_DATA_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AVRISP_DATA_EPSIZE, .PollingIntervalMS = 0x0A diff --git a/Projects/AVRISP-MKII/Descriptors.h b/Projects/AVRISP-MKII/Descriptors.h index 5a994ba19..1b140f30d 100644 --- a/Projects/AVRISP-MKII/Descriptors.h +++ b/Projects/AVRISP-MKII/Descriptors.h @@ -42,18 +42,15 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - #if !defined(LIBUSB_DRIVER_COMPAT) - /** Endpoint number of the AVRISP data OUT endpoint. */ - #define AVRISP_DATA_OUT_EPNUM 2 + #if !defined(LIBUSB_DRIVER_COMPAT) || defined(__DOXYGEN__) + /** Endpoint address of the AVRISP data OUT endpoint. */ + #define AVRISP_DATA_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) - /** Endpoint number of the AVRISP data IN endpoint. */ - #define AVRISP_DATA_IN_EPNUM 2 + /** Endpoint address of the AVRISP data IN endpoint. */ + #define AVRISP_DATA_IN_EPADDR (ENDPOINT_DIR_IN | 2) #else - /** Endpoint number of the AVRISP data OUT endpoint. */ - #define AVRISP_DATA_OUT_EPNUM 2 - - /** Endpoint number of the AVRISP data IN endpoint. */ - #define AVRISP_DATA_IN_EPNUM 3 + #define AVRISP_DATA_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) + #define AVRISP_DATA_IN_EPADDR (ENDPOINT_DIR_IN | 3) #endif /** Size in bytes of the AVRISP data endpoint. */ diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c index f757ac143..445e088d2 100644 --- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c +++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c @@ -57,7 +57,7 @@ void ISPProtocol_EnterISPMode(void) Endpoint_Read_Stream_LE(&Enter_ISP_Params, sizeof(Enter_ISP_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint8_t ResponseStatus = STATUS_CMD_FAILED; @@ -115,7 +115,7 @@ void ISPProtocol_LeaveISPMode(void) Endpoint_Read_Stream_LE(&Leave_ISP_Params, sizeof(Leave_ISP_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); /* Perform pre-exit delay, release the target /RESET, disable the SPI bus and perform the post-exit delay */ @@ -154,7 +154,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command) if (Write_Memory_Params.BytesToWrite > sizeof(Write_Memory_Params.ProgData)) { Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(V2Command); @@ -175,7 +175,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command) } Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint8_t ProgrammingStatus = STATUS_CMD_OK; @@ -295,7 +295,7 @@ void ISPProtocol_ReadMemory(uint8_t V2Command) Read_Memory_Params.BytesToRead = SwapEndian_16(Read_Memory_Params.BytesToRead); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(V2Command); @@ -368,7 +368,7 @@ void ISPProtocol_ChipErase(void) Endpoint_Read_Stream_LE(&Erase_Chip_Params, sizeof(Erase_Chip_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint8_t ResponseStatus = STATUS_CMD_OK; @@ -404,7 +404,7 @@ void ISPProtocol_ReadFuseLockSigOSCCAL(uint8_t V2Command) Endpoint_Read_Stream_LE(&Read_FuseLockSigOSCCAL_Params, sizeof(Read_FuseLockSigOSCCAL_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint8_t ResponseBytes[4]; @@ -435,7 +435,7 @@ void ISPProtocol_WriteFuseLock(uint8_t V2Command) Endpoint_Read_Stream_LE(&Write_FuseLockSig_Params, sizeof(Write_FuseLockSig_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); /* Send the Fuse or Lock byte program commands as given by the host to the device */ @@ -463,7 +463,7 @@ void ISPProtocol_SPIMulti(void) Endpoint_Read_Stream_LE(&SPI_Multi_Params.TxData, SPI_Multi_Params.TxBytes, NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(CMD_SPI_MULTI); diff --git a/Projects/AVRISP-MKII/Lib/V2Protocol.c b/Projects/AVRISP-MKII/Lib/V2Protocol.c index f48581051..e7c43cd01 100644 --- a/Projects/AVRISP-MKII/Lib/V2Protocol.c +++ b/Projects/AVRISP-MKII/Lib/V2Protocol.c @@ -150,7 +150,7 @@ void V2Protocol_ProcessCommand(void) TCCR0B = 0; Endpoint_WaitUntilReady(); - Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT); } @@ -169,7 +169,7 @@ static void V2Protocol_UnknownCommand(const uint8_t V2Command) } Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(V2Command); @@ -181,7 +181,7 @@ static void V2Protocol_UnknownCommand(const uint8_t V2Command) static void V2Protocol_SignOn(void) { Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(CMD_SIGN_ON); @@ -197,7 +197,7 @@ static void V2Protocol_SignOn(void) static void V2Protocol_ResetProtection(void) { Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(CMD_RESET_PROTECTION); @@ -220,7 +220,7 @@ static void V2Protocol_GetSetParam(const uint8_t V2Command) ParamValue = Endpoint_Read_8(); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(V2Command); @@ -254,7 +254,7 @@ static void V2Protocol_LoadAddress(void) Endpoint_Read_Stream_BE(&CurrentAddress, sizeof(CurrentAddress), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); if (CurrentAddress & (1UL << 31)) diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c index d34273093..ad8cd530a 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c +++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c @@ -65,7 +65,7 @@ void XPROGProtocol_SetMode(void) Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol; @@ -112,7 +112,7 @@ void XPROGProtocol_Command(void) static void XPROGProtocol_EnterXPROGMode(void) { Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); bool NVMBusEnabled = false; @@ -134,7 +134,7 @@ static void XPROGProtocol_EnterXPROGMode(void) static void XPROGProtocol_LeaveXPROGMode(void) { Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI) @@ -169,7 +169,7 @@ static void XPROGProtocol_Erase(void) Erase_XPROG_Params.Address = SwapEndian_32(Erase_XPROG_Params.Address); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint8_t EraseCommand; @@ -260,7 +260,7 @@ static void XPROGProtocol_WriteMemory(void) } Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI) @@ -342,7 +342,7 @@ static void XPROGProtocol_ReadMemory(void) ReadMemory_XPROG_Params.Length = SwapEndian_16(ReadMemory_XPROG_Params.Length); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint8_t ReadBuffer[256]; @@ -385,7 +385,7 @@ static void XPROGProtocol_ReadCRC(void) Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint32_t MemoryCRC; @@ -467,7 +467,7 @@ static void XPROGProtocol_SetParam(void) } Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(CMD_XPROG); diff --git a/Projects/Benito/Benito.c b/Projects/Benito/Benito.c index 8d9ac5302..d68cee3c9 100644 --- a/Projects/Benito/Benito.c +++ b/Projects/Benito/Benito.c @@ -62,19 +62,25 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = { .Config = { - .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .ControlInterfaceNumber = 0, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; diff --git a/Projects/Benito/Descriptors.c b/Projects/Benito/Descriptors.c index 86d8c4d0c..2990848eb 100644 --- a/Projects/Benito/Descriptors.c +++ b/Projects/Benito/Descriptors.c @@ -131,7 +131,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -157,7 +157,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -167,7 +167,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Projects/Benito/Descriptors.h b/Projects/Benito/Descriptors.h index 03f4e5e7a..e481793b0 100644 --- a/Projects/Benito/Descriptors.h +++ b/Projects/Benito/Descriptors.h @@ -42,14 +42,14 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Projects/HIDReportViewer/HIDReportViewer.c b/Projects/HIDReportViewer/HIDReportViewer.c index c0cc11f67..fa44c0843 100644 --- a/Projects/HIDReportViewer/HIDReportViewer.c +++ b/Projects/HIDReportViewer/HIDReportViewer.c @@ -47,14 +47,17 @@ USB_ClassInfo_HID_Host_t Device_HID_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_NonBootProtocol, - .HIDParserData = &HIDReportInfo }, }; diff --git a/Projects/Incomplete/StandaloneProgrammer/Descriptors.c b/Projects/Incomplete/StandaloneProgrammer/Descriptors.c index a3319e4ab..e674c93e0 100644 --- a/Projects/Incomplete/StandaloneProgrammer/Descriptors.c +++ b/Projects/Incomplete/StandaloneProgrammer/Descriptors.c @@ -120,7 +120,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 @@ -130,7 +130,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Projects/Incomplete/StandaloneProgrammer/Descriptors.h b/Projects/Incomplete/StandaloneProgrammer/Descriptors.h index 250fcf79b..c0e8f46d7 100644 --- a/Projects/Incomplete/StandaloneProgrammer/Descriptors.h +++ b/Projects/Incomplete/StandaloneProgrammer/Descriptors.h @@ -42,14 +42,14 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 5 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 5) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 1 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 2 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 2) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 @@ -57,11 +57,11 @@ /** Size in bytes of the CDC data IN and OUT endpoints. */ #define CDC_TXRX_EPSIZE 16 - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 diff --git a/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c b/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c index bc70910e7..73bf5545a 100644 --- a/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c +++ b/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c @@ -40,15 +40,18 @@ USB_ClassInfo_MS_Device_t DiskDevice_MS_Interface = .Config = { .InterfaceNumber = 0, - - .DataINEndpointNumber = MASS_STORAGE_IN_EPNUM, - .DataINEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MASS_STORAGE_OUT_EPNUM, - .DataOUTEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataOUTEndpointDoubleBank = false, - + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, .TotalLUNs = 1, }, }; diff --git a/Projects/Incomplete/StandaloneProgrammer/DiskHost.c b/Projects/Incomplete/StandaloneProgrammer/DiskHost.c index 1dafda43b..c93029c06 100644 --- a/Projects/Incomplete/StandaloneProgrammer/DiskHost.c +++ b/Projects/Incomplete/StandaloneProgrammer/DiskHost.c @@ -39,11 +39,16 @@ USB_ClassInfo_MS_Host_t DiskHost_MS_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, }, }; diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c index cac0bd957..d953875a2 100644 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c +++ b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c @@ -5,7 +5,7 @@ #include "diskio.h" #include <string.h> -#include <LUFA/Drivers/USB/Class/MassStorage.h> +#include <LUFA/Drivers/USB/USB.h> #include "../DataflashManager.h" #include "../../DiskHost.h" diff --git a/Projects/LEDNotifier/Descriptors.c b/Projects/LEDNotifier/Descriptors.c index e362857b4..9dda9e699 100644 --- a/Projects/LEDNotifier/Descriptors.c +++ b/Projects/LEDNotifier/Descriptors.c @@ -143,7 +143,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -169,7 +169,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -179,7 +179,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Projects/LEDNotifier/Descriptors.h b/Projects/LEDNotifier/Descriptors.h index 03f4e5e7a..e481793b0 100644 --- a/Projects/LEDNotifier/Descriptors.h +++ b/Projects/LEDNotifier/Descriptors.h @@ -42,14 +42,14 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Projects/LEDNotifier/LEDNotifier.c b/Projects/LEDNotifier/LEDNotifier.c index 34f29e124..dd3a8ae3a 100644 --- a/Projects/LEDNotifier/LEDNotifier.c +++ b/Projects/LEDNotifier/LEDNotifier.c @@ -44,19 +44,25 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = { .Config = { - .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .ControlInterfaceNumber = 0, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; diff --git a/Projects/MIDIToneGenerator/Descriptors.c b/Projects/MIDIToneGenerator/Descriptors.c index 9ad0e86a5..84898acf6 100644 --- a/Projects/MIDIToneGenerator/Descriptors.c +++ b/Projects/MIDIToneGenerator/Descriptors.c @@ -199,7 +199,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MIDI_STREAM_OUT_EPNUM), + .EndpointAddress = MIDI_STREAM_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MIDI_STREAM_EPSIZE, .PollingIntervalMS = 0x01 @@ -224,7 +224,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MIDI_STREAM_IN_EPNUM), + .EndpointAddress = MIDI_STREAM_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MIDI_STREAM_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Projects/MIDIToneGenerator/Descriptors.h b/Projects/MIDIToneGenerator/Descriptors.h index c5dc2e217..83844449d 100644 --- a/Projects/MIDIToneGenerator/Descriptors.h +++ b/Projects/MIDIToneGenerator/Descriptors.h @@ -42,11 +42,11 @@ #include <avr/pgmspace.h> /* Macros: */ - /** Endpoint number of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ - #define MIDI_STREAM_IN_EPNUM 2 + /** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ + #define MIDI_STREAM_IN_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */ - #define MIDI_STREAM_OUT_EPNUM 1 + /** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */ + #define MIDI_STREAM_OUT_EPADDR (ENDPOINT_DIR_OUT | 1) /** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */ #define MIDI_STREAM_EPSIZE 64 diff --git a/Projects/MIDIToneGenerator/MIDIToneGenerator.c b/Projects/MIDIToneGenerator/MIDIToneGenerator.c index 4062bffab..2a9d5c3c0 100644 --- a/Projects/MIDIToneGenerator/MIDIToneGenerator.c +++ b/Projects/MIDIToneGenerator/MIDIToneGenerator.c @@ -45,14 +45,18 @@ USB_ClassInfo_MIDI_Device_t Keyboard_MIDI_Interface = .Config = { .StreamingInterfaceNumber = 1, - - .DataINEndpointNumber = MIDI_STREAM_IN_EPNUM, - .DataINEndpointSize = MIDI_STREAM_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MIDI_STREAM_OUT_EPNUM, - .DataOUTEndpointSize = MIDI_STREAM_EPSIZE, - .DataOUTEndpointDoubleBank = false, + .DataINEndpoint = + { + .Address = MIDI_STREAM_IN_EPADDR, + .Size = MIDI_STREAM_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MIDI_STREAM_OUT_EPADDR, + .Size = MIDI_STREAM_EPSIZE, + .Banks = 1, + }, }, }; diff --git a/Projects/Magstripe/Descriptors.c b/Projects/Magstripe/Descriptors.c index aec8b880d..b031d5403 100644 --- a/Projects/Magstripe/Descriptors.c +++ b/Projects/Magstripe/Descriptors.c @@ -132,7 +132,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_EPNUM), + .EndpointAddress = KEYBOARD_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = KEYBOARD_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Projects/Magstripe/Descriptors.h b/Projects/Magstripe/Descriptors.h index 27ea9a1c5..f90816a82 100644 --- a/Projects/Magstripe/Descriptors.h +++ b/Projects/Magstripe/Descriptors.h @@ -58,8 +58,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the keyboard key press reporting endpoint. */ - #define KEYBOARD_EPNUM 1 + /** Endpoint address of the keyboard key press reporting endpoint. */ + #define KEYBOARD_EPADDR (ENDPOINT_DIR_IN | 1) /** Size of the keyboard report endpoints, in bytes. */ #define KEYBOARD_EPSIZE 8 diff --git a/Projects/Magstripe/Magstripe.c b/Projects/Magstripe/Magstripe.c index 6e41ce67f..ecdf68b0b 100644 --- a/Projects/Magstripe/Magstripe.c +++ b/Projects/Magstripe/Magstripe.c @@ -57,11 +57,12 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = KEYBOARD_EPNUM, - .ReportINEndpointSize = KEYBOARD_EPSIZE, - .ReportINEndpointDoubleBank = KEYBOARD_EPSIZE, - + .ReportINEndpoint = + { + .Address = KEYBOARD_EPADDR, + .Size = KEYBOARD_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevKeyboardHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevKeyboardHIDReportBuffer), }, diff --git a/Projects/MediaController/Descriptors.c b/Projects/MediaController/Descriptors.c index fc862aa90..7ba467c28 100644 --- a/Projects/MediaController/Descriptors.c +++ b/Projects/MediaController/Descriptors.c @@ -149,7 +149,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MEDIACONTROL_HID_EPNUM), + .EndpointAddress = MEDIACONTROL_HID_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MEDIACONTROL_HID_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Projects/MediaController/Descriptors.h b/Projects/MediaController/Descriptors.h index ec9b33082..3844e3138 100644 --- a/Projects/MediaController/Descriptors.h +++ b/Projects/MediaController/Descriptors.h @@ -57,11 +57,11 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Media Control HID reporting IN endpoint. */ - #define MEDIACONTROL_HID_EPNUM 1 + /** Endpoint address of the Media Control HID reporting IN endpoint. */ + #define MEDIACONTROL_HID_EPADDR (ENDPOINT_DIR_IN | 1) - /** Size in bytes of the Media Control HID reporting IN and OUT endpoints. */ - #define MEDIACONTROL_HID_EPSIZE 8 + /** Size in bytes of the Media Control HID reporting IN endpoint. */ + #define MEDIACONTROL_HID_EPSIZE 8 /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, diff --git a/Projects/MediaController/MediaController.c b/Projects/MediaController/MediaController.c index 01405270a..24f02580d 100644 --- a/Projects/MediaController/MediaController.c +++ b/Projects/MediaController/MediaController.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t MediaControl_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = MEDIACONTROL_HID_EPNUM, - .ReportINEndpointSize = MEDIACONTROL_HID_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = MEDIACONTROL_HID_EPADDR, + .Size = MEDIACONTROL_HID_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevMediaControlHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevMediaControlHIDReportBuffer), }, diff --git a/Projects/MissileLauncher/ConfigDescriptor.c b/Projects/MissileLauncher/ConfigDescriptor.c index efcd2be5c..e287d78d3 100644 --- a/Projects/MissileLauncher/ConfigDescriptor.c +++ b/Projects/MissileLauncher/ConfigDescriptor.c @@ -109,16 +109,14 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Check if the HID interface contained an optional OUT data endpoint */ if (DataOUTEndpoint) { /* Configure the HID data OUT pipe */ - Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); } /* Valid data found, return success */ diff --git a/Projects/MissileLauncher/ConfigDescriptor.h b/Projects/MissileLauncher/ConfigDescriptor.h index b05f7efe4..c857bf7c0 100644 --- a/Projects/MissileLauncher/ConfigDescriptor.h +++ b/Projects/MissileLauncher/ConfigDescriptor.h @@ -45,11 +45,11 @@ /** Interface Class value for the Human Interface Device class. */ #define HID_CLASS 0x03 - /** Pipe number for the HID data IN pipe. */ - #define HID_DATA_IN_PIPE 1 + /** Pipe address for the HID data IN pipe. */ + #define HID_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number for the HID data OUT pipe. */ - #define HID_DATA_OUT_PIPE 2 + /** Pipe address for the HID data OUT pipe. */ + #define HID_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Projects/RelayBoard/Doxygen.conf b/Projects/RelayBoard/Doxygen.conf index 953c2af7e..7dc0279fc 100644 --- a/Projects/RelayBoard/Doxygen.conf +++ b/Projects/RelayBoard/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "OB's Dual-Relay outlet control using a Teensy2++" +PROJECT_NAME = "OB's Dual-Relay Outlet Control Project" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Projects/TempDataLogger/Descriptors.c b/Projects/TempDataLogger/Descriptors.c index d930137ad..f75d78823 100644 --- a/Projects/TempDataLogger/Descriptors.c +++ b/Projects/TempDataLogger/Descriptors.c @@ -136,7 +136,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 @@ -146,7 +146,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 @@ -183,7 +183,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | GENERIC_IN_EPNUM), + .EndpointAddress = GENERIC_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = GENERIC_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Projects/TempDataLogger/Descriptors.h b/Projects/TempDataLogger/Descriptors.h index 87ed01e1b..5f9814308 100644 --- a/Projects/TempDataLogger/Descriptors.h +++ b/Projects/TempDataLogger/Descriptors.h @@ -17,17 +17,17 @@ #include "TempDataLogger.h" /* Macros: */ - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 - /** Endpoint number of the Generic HID reporting IN endpoint. */ - #define GENERIC_IN_EPNUM 1 + /** Endpoint address of the Generic HID reporting IN endpoint. */ + #define GENERIC_IN_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Generic HID reporting endpoint. */ #define GENERIC_EPSIZE 16 diff --git a/Projects/TempDataLogger/TempDataLogger.c b/Projects/TempDataLogger/TempDataLogger.c index 83590b311..9ead42ed3 100644 --- a/Projects/TempDataLogger/TempDataLogger.c +++ b/Projects/TempDataLogger/TempDataLogger.c @@ -45,15 +45,18 @@ USB_ClassInfo_MS_Device_t Disk_MS_Interface = .Config = { .InterfaceNumber = 0, - - .DataINEndpointNumber = MASS_STORAGE_IN_EPNUM, - .DataINEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MASS_STORAGE_OUT_EPNUM, - .DataOUTEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataOUTEndpointDoubleBank = false, - + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, .TotalLUNs = 1, }, }; @@ -70,11 +73,12 @@ USB_ClassInfo_HID_Device_t Generic_HID_Interface = .Config = { .InterfaceNumber = 1, - - .ReportINEndpointNumber = GENERIC_IN_EPNUM, - .ReportINEndpointSize = GENERIC_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = GENERIC_IN_EPADDR, + .Size = GENERIC_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevHIDReportBuffer), }, diff --git a/Projects/USBtoSerial/Descriptors.c b/Projects/USBtoSerial/Descriptors.c index e623a541d..66f81b814 100644 --- a/Projects/USBtoSerial/Descriptors.c +++ b/Projects/USBtoSerial/Descriptors.c @@ -143,7 +143,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -169,7 +169,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -179,7 +179,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Projects/USBtoSerial/Descriptors.h b/Projects/USBtoSerial/Descriptors.h index 03f4e5e7a..e481793b0 100644 --- a/Projects/USBtoSerial/Descriptors.h +++ b/Projects/USBtoSerial/Descriptors.h @@ -42,14 +42,14 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Projects/USBtoSerial/USBtoSerial.c b/Projects/USBtoSerial/USBtoSerial.c index 194f6b084..7fe67da44 100644 --- a/Projects/USBtoSerial/USBtoSerial.c +++ b/Projects/USBtoSerial/USBtoSerial.c @@ -57,18 +57,24 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = .Config = { .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; diff --git a/Projects/Webserver/Descriptors.c b/Projects/Webserver/Descriptors.c index 54cec1ce3..fb19a081a 100644 --- a/Projects/Webserver/Descriptors.c +++ b/Projects/Webserver/Descriptors.c @@ -157,7 +157,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -183,7 +183,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -193,7 +193,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -219,7 +219,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 @@ -229,7 +229,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Projects/Webserver/Descriptors.h b/Projects/Webserver/Descriptors.h index b0e0c1160..591947c89 100644 --- a/Projects/Webserver/Descriptors.h +++ b/Projects/Webserver/Descriptors.h @@ -42,23 +42,23 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 5 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 5) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 1 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 2 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 2) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Projects/Webserver/USBDeviceMode.c b/Projects/Webserver/USBDeviceMode.c index 591ee92b0..158e7590f 100644 --- a/Projects/Webserver/USBDeviceMode.c +++ b/Projects/Webserver/USBDeviceMode.c @@ -45,19 +45,24 @@ USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface_Device = .Config = { .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = true, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = true, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = true, - + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, .AdapterVendorDescription = "LUFA RNDIS Adapter", .AdapterMACAddress = {{0x02, 0x00, 0x02, 0x00, 0x02, 0x00}}, }, @@ -71,16 +76,19 @@ USB_ClassInfo_MS_Device_t Disk_MS_Interface = { .Config = { - .InterfaceNumber = 2, - - .DataINEndpointNumber = MASS_STORAGE_IN_EPNUM, - .DataINEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MASS_STORAGE_OUT_EPNUM, - .DataOUTEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataOUTEndpointDoubleBank = false, - + .InterfaceNumber = 2, + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, .TotalLUNs = 1, }, }; diff --git a/Projects/Webserver/USBHostMode.c b/Projects/Webserver/USBHostMode.c index e7091fc89..601ebda45 100644 --- a/Projects/Webserver/USBHostMode.c +++ b/Projects/Webserver/USBHostMode.c @@ -44,16 +44,22 @@ USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface_Host = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - - .NotificationPipeNumber = 3, - .NotificationPipeDoubleBank = false, - - .HostMaxPacketSize = UIP_CONF_BUFFER_SIZE, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, + .NotificationPipe = + { + .Address = (PIPE_DIR_IN | 3), + .Banks = 1, + }, + .HostMaxPacketSize = UIP_CONF_BUFFER_SIZE, }, }; diff --git a/Projects/XPLAINBridge/AVRISPDescriptors.c b/Projects/XPLAINBridge/AVRISPDescriptors.c index 5f2071ebb..a901e0945 100644 --- a/Projects/XPLAINBridge/AVRISPDescriptors.c +++ b/Projects/XPLAINBridge/AVRISPDescriptors.c @@ -106,7 +106,7 @@ const AVRISP_USB_Descriptor_Configuration_t PROGMEM AVRISP_ConfigurationDescript { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | AVRISP_DATA_IN_EPNUM), + .EndpointAddress = AVRISP_DATA_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AVRISP_DATA_EPSIZE, .PollingIntervalMS = 0x0A @@ -116,7 +116,7 @@ const AVRISP_USB_Descriptor_Configuration_t PROGMEM AVRISP_ConfigurationDescript { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | AVRISP_DATA_OUT_EPNUM), + .EndpointAddress = AVRISP_DATA_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AVRISP_DATA_EPSIZE, .PollingIntervalMS = 0x0A diff --git a/Projects/XPLAINBridge/AVRISPDescriptors.h b/Projects/XPLAINBridge/AVRISPDescriptors.h index 9487f685b..c0eeedf70 100644 --- a/Projects/XPLAINBridge/AVRISPDescriptors.h +++ b/Projects/XPLAINBridge/AVRISPDescriptors.h @@ -42,18 +42,15 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - #if !defined(LIBUSB_DRIVER_COMPAT) - /** Endpoint number of the AVRISP data OUT endpoint. */ - #define AVRISP_DATA_OUT_EPNUM 2 + #if !defined(LIBUSB_DRIVER_COMPAT) || defined(__DOXYGEN__) + /** Endpoint address of the AVRISP data OUT endpoint. */ + #define AVRISP_DATA_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) - /** Endpoint number of the AVRISP data IN endpoint. */ - #define AVRISP_DATA_IN_EPNUM 2 + /** Endpoint address of the AVRISP data IN endpoint. */ + #define AVRISP_DATA_IN_EPADDR (ENDPOINT_DIR_IN | 2) #else - /** Endpoint number of the AVRISP data OUT endpoint. */ - #define AVRISP_DATA_OUT_EPNUM 2 - - /** Endpoint number of the AVRISP data IN endpoint. */ - #define AVRISP_DATA_IN_EPNUM 3 + #define AVRISP_DATA_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) + #define AVRISP_DATA_IN_EPADDR (ENDPOINT_DIR_IN | 3) #endif /** Size in bytes of the AVRISP data endpoint. */ diff --git a/Projects/XPLAINBridge/Doxygen.conf b/Projects/XPLAINBridge/Doxygen.conf index 6b9c96de9..5628d23a7 100644 --- a/Projects/XPLAINBridge/Doxygen.conf +++ b/Projects/XPLAINBridge/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "LUFA Library - XPLAIN Serial Bridge/PDI Programmer Device Demo" +PROJECT_NAME = "LUFA Library - XPLAIN Serial Bridge/PDI Programmer Project" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Projects/XPLAINBridge/USARTDescriptors.c b/Projects/XPLAINBridge/USARTDescriptors.c index 30039aa2b..d058aeabf 100644 --- a/Projects/XPLAINBridge/USARTDescriptors.c +++ b/Projects/XPLAINBridge/USARTDescriptors.c @@ -143,7 +143,7 @@ const USART_USB_Descriptor_Configuration_t PROGMEM USART_ConfigurationDescriptor { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -169,7 +169,7 @@ const USART_USB_Descriptor_Configuration_t PROGMEM USART_ConfigurationDescriptor { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 @@ -179,7 +179,7 @@ const USART_USB_Descriptor_Configuration_t PROGMEM USART_ConfigurationDescriptor { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Projects/XPLAINBridge/USARTDescriptors.h b/Projects/XPLAINBridge/USARTDescriptors.h index 2569a72a3..4bb771be9 100644 --- a/Projects/XPLAINBridge/USARTDescriptors.h +++ b/Projects/XPLAINBridge/USARTDescriptors.h @@ -42,14 +42,14 @@ #include <LUFA/Drivers/USB/USB.h> /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c index bee770a98..071c13e53 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.c +++ b/Projects/XPLAINBridge/XPLAINBridge.c @@ -48,18 +48,24 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = .Config = { .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = true, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = true, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; @@ -105,7 +111,7 @@ void AVRISP_Task(void) V2Params_UpdateParamValues(); - Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPADDR); /* Check to see if a V2 Protocol command has been received */ if (Endpoint_IsOUTReceived()) @@ -213,12 +219,10 @@ void EVENT_USB_Device_ConfigurationChanged(void) } else { - ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1); #if defined(LIBUSB_DRIVER_COMPAT) - ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1); #endif /* Configure the V2 protocol packet handler */ |