New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which do not adversely affect the code operation (currently only the LEDs driver).

Spell-check code/comments in the Webserver/AVRISP-MKII projects.

87 files changed, 123 insertions, 103 deletions

diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile
index 8d91b7655..8a5134284 100644
--- a/Bootloaders/CDC/makefile
+++ b/Bootloaders/CDC/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile
index cd5d2c7e2..2cccd1d8d 100644
--- a/Bootloaders/DFU/makefile
+++ b/Bootloaders/DFU/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD = USBKEY

diff --git a/Bootloaders/Incomplete/MIDI/makefile b/Bootloaders/Incomplete/MIDI/makefile
index af3df3bc3..4a29d0b88 100644
--- a/Bootloaders/Incomplete/MIDI/makefile
+++ b/Bootloaders/Incomplete/MIDI/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Bootloaders/TeensyHID/makefile b/Bootloaders/TeensyHID/makefile
index c7210f0e8..12b16424b 100644
--- a/Bootloaders/TeensyHID/makefile
+++ b/Bootloaders/TeensyHID/makefile
@@ -63,7 +63,7 @@
 MCU = atmega32u4

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = 

diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile
index 5eda91b67..cdb510573 100644
--- a/Demos/Device/ClassDriver/AudioInput/makefile
+++ b/Demos/Device/ClassDriver/AudioInput/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile
index 4729f1ffe..ba2f9130a 100644
--- a/Demos/Device/ClassDriver/AudioOutput/makefile
+++ b/Demos/Device/ClassDriver/AudioOutput/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
index d8cf086b8..8f147011d 100644
--- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile
index 1160f6528..fffca878f 100644
--- a/Demos/Device/ClassDriver/GenericHID/makefile
+++ b/Demos/Device/ClassDriver/GenericHID/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile
index 63d739f5c..a1357d606 100644
--- a/Demos/Device/ClassDriver/Joystick/makefile
+++ b/Demos/Device/ClassDriver/Joystick/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile
index 9a6d396c9..5d94c5a9e 100644
--- a/Demos/Device/ClassDriver/Keyboard/makefile
+++ b/Demos/Device/ClassDriver/Keyboard/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile
index 089ef0532..64e425a89 100644
--- a/Demos/Device/ClassDriver/KeyboardMouse/makefile
+++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile
index 7965e9189..6adefed8d 100644
--- a/Demos/Device/ClassDriver/MIDI/makefile
+++ b/Demos/Device/ClassDriver/MIDI/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile
index c4eee7b7c..9aa1e1a11 100644
--- a/Demos/Device/ClassDriver/MassStorage/makefile
+++ b/Demos/Device/ClassDriver/MassStorage/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
index 3fc8293e9..b44c97f30 100644
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile
index aa56743e7..4d92bb343 100644
--- a/Demos/Device/ClassDriver/Mouse/makefile
+++ b/Demos/Device/ClassDriver/Mouse/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile
index 2c28b9820..2b38bc22a 100644
--- a/Demos/Device/ClassDriver/RNDISEthernet/makefile
+++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile
index 024bf9289..542f7291f 100644
--- a/Demos/Device/ClassDriver/VirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerial/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
index 990760e85..c2f4e1b6f 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile
index c2ac4ba47..4fc3b844d 100644
--- a/Demos/Device/Incomplete/Sideshow/makefile
+++ b/Demos/Device/Incomplete/Sideshow/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile
index 21d6a9731..07c9b6077 100644
--- a/Demos/Device/LowLevel/AudioInput/makefile
+++ b/Demos/Device/LowLevel/AudioInput/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile
index cd91640a2..4d0d40e32 100644
--- a/Demos/Device/LowLevel/AudioOutput/makefile
+++ b/Demos/Device/LowLevel/AudioOutput/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile
index ef10bb38d..af9540eee 100644
--- a/Demos/Device/LowLevel/DualVirtualSerial/makefile
+++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile
index 9e934b334..6a94fe49c 100644
--- a/Demos/Device/LowLevel/GenericHID/makefile
+++ b/Demos/Device/LowLevel/GenericHID/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile
index ff6cf801c..a5bad9fa2 100644
--- a/Demos/Device/LowLevel/Joystick/makefile
+++ b/Demos/Device/LowLevel/Joystick/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile
index 53612cab2..b294ed7b9 100644
--- a/Demos/Device/LowLevel/Keyboard/makefile
+++ b/Demos/Device/LowLevel/Keyboard/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile
index 5bd4e00b1..333e1054e 100644
--- a/Demos/Device/LowLevel/KeyboardMouse/makefile
+++ b/Demos/Device/LowLevel/KeyboardMouse/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile
index 09f64724f..2cc4bce4f 100644
--- a/Demos/Device/LowLevel/MIDI/makefile
+++ b/Demos/Device/LowLevel/MIDI/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile
index eee62f191..51da5ccaa 100644
--- a/Demos/Device/LowLevel/MassStorage/makefile
+++ b/Demos/Device/LowLevel/MassStorage/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile
index b5cfcd24f..7cbc631b3 100644
--- a/Demos/Device/LowLevel/Mouse/makefile
+++ b/Demos/Device/LowLevel/Mouse/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile
index 74909f43a..3903a9c8b 100644
--- a/Demos/Device/LowLevel/RNDISEthernet/makefile
+++ b/Demos/Device/LowLevel/RNDISEthernet/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile
index 652865134..5adec6cb6 100644
--- a/Demos/Device/LowLevel/VirtualSerial/makefile
+++ b/Demos/Device/LowLevel/VirtualSerial/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
index 29f798ca8..fd4a28c73 100644
--- a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
+++ b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
index d071cc2c6..b7c23aae5 100644
--- a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/KeyboardHost/makefile b/Demos/Host/ClassDriver/KeyboardHost/makefile
index 4a682b037..1462b85f8 100644
--- a/Demos/Host/ClassDriver/KeyboardHost/makefile
+++ b/Demos/Host/ClassDriver/KeyboardHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
index c0b31afc3..16e52f551 100644
--- a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt
index 3489b1f64..afd95c9e6 100644
--- a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt
+++ b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt
@@ -41,7 +41,7 @@
  *

  *  \section SSec_Description Project Description: 

  *

- *  MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incomming MIDI note

+ *  MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incoming MIDI note

  *  on and off messages on any channel to the serial port. Pressing the board joystick will send note on and off messages to

  *  the attached MIDI device, with the board HWB controlling the note channel.

  *

diff --git a/Demos/Host/ClassDriver/MIDIHost/makefile b/Demos/Host/ClassDriver/MIDIHost/makefile
index ecfe02319..279312d9b 100644
--- a/Demos/Host/ClassDriver/MIDIHost/makefile
+++ b/Demos/Host/ClassDriver/MIDIHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/MassStorageHost/makefile b/Demos/Host/ClassDriver/MassStorageHost/makefile
index af3f57779..fdbdccfd1 100644
--- a/Demos/Host/ClassDriver/MassStorageHost/makefile
+++ b/Demos/Host/ClassDriver/MassStorageHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/MouseHost/makefile b/Demos/Host/ClassDriver/MouseHost/makefile
index d37d4d53d..287691d45 100644
--- a/Demos/Host/ClassDriver/MouseHost/makefile
+++ b/Demos/Host/ClassDriver/MouseHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/makefile b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
index a579a2a74..39a96c3d3 100644
--- a/Demos/Host/ClassDriver/MouseHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/PrinterHost/makefile b/Demos/Host/ClassDriver/PrinterHost/makefile
index f0cacffad..1df154426 100644
--- a/Demos/Host/ClassDriver/PrinterHost/makefile
+++ b/Demos/Host/ClassDriver/PrinterHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c
index 148fdf2f1..5b2bfe133 100644
--- a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c
+++ b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c
@@ -36,7 +36,7 @@
  

 #include "RNDISEthernetHost.h"

 

-/** Buffer to hold incomming and outgoing Ethernet packets. */

+/** Buffer to hold incoming and outgoing Ethernet packets. */

 uint8_t PacketBuffer[1024];

 

 /** LUFA RNDIS Class driver interface configuration and state information. This structure is

@@ -146,7 +146,7 @@ int main(void)
 				USB_HostState = HOST_STATE_Configured;

 				break;

 			case HOST_STATE_Configured:

-				PrintIncommingPackets();

+				PrintIncomingPackets();

 			

 				break;

 		}

@@ -156,8 +156,8 @@ int main(void)
 	}

 }

 

-/** Prints incomming packets from the attached RNDIS device to the serial port. */

-void PrintIncommingPackets(void)

+/** Prints incoming packets from the attached RNDIS device to the serial port. */

+void PrintIncomingPackets(void)

 {

 	if (RNDIS_Host_IsPacketReceived(&Ethernet_RNDIS_Interface))

 	{

diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h
index b1eac9e48..06b9fd525 100644
--- a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h
+++ b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h
@@ -68,7 +68,7 @@
 

 	/* Function Prototypes: */

 		void SetupHardware(void);

-		void PrintIncommingPackets(void);

+		void PrintIncomingPackets(void);

 	

 		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);

 		void EVENT_USB_Host_DeviceAttached(void);

diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
index c8546846b..59672d7ab 100644
--- a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
+++ b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/StillImageHost/makefile b/Demos/Host/ClassDriver/StillImageHost/makefile
index 3a00809ab..70e2ccf8a 100644
--- a/Demos/Host/ClassDriver/StillImageHost/makefile
+++ b/Demos/Host/ClassDriver/StillImageHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/makefile b/Demos/Host/ClassDriver/VirtualSerialHost/makefile
index 2942a6deb..0a5d647a7 100644
--- a/Demos/Host/ClassDriver/VirtualSerialHost/makefile
+++ b/Demos/Host/ClassDriver/VirtualSerialHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/Incomplete/BluetoothHost/makefile b/Demos/Host/Incomplete/BluetoothHost/makefile
index d0d7192f6..63c7f527a 100644
--- a/Demos/Host/Incomplete/BluetoothHost/makefile
+++ b/Demos/Host/Incomplete/BluetoothHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/GenericHIDHost/makefile b/Demos/Host/LowLevel/GenericHIDHost/makefile
index f04310d28..b00155761 100644
--- a/Demos/Host/LowLevel/GenericHIDHost/makefile
+++ b/Demos/Host/LowLevel/GenericHIDHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/makefile b/Demos/Host/LowLevel/JoystickHostWithParser/makefile
index ad476d406..5b09bf98b 100644
--- a/Demos/Host/LowLevel/JoystickHostWithParser/makefile
+++ b/Demos/Host/LowLevel/JoystickHostWithParser/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/KeyboardHost/makefile b/Demos/Host/LowLevel/KeyboardHost/makefile
index 041420944..eb889ff99 100644
--- a/Demos/Host/LowLevel/KeyboardHost/makefile
+++ b/Demos/Host/LowLevel/KeyboardHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
index bad75cc32..e1202ed88 100644
--- a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
+++ b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt b/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt
index 3489b1f64..afd95c9e6 100644
--- a/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt
+++ b/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt
@@ -41,7 +41,7 @@
  *

  *  \section SSec_Description Project Description: 

  *

- *  MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incomming MIDI note

+ *  MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incoming MIDI note

  *  on and off messages on any channel to the serial port. Pressing the board joystick will send note on and off messages to

  *  the attached MIDI device, with the board HWB controlling the note channel.

  *

diff --git a/Demos/Host/LowLevel/MIDIHost/makefile b/Demos/Host/LowLevel/MIDIHost/makefile
index 1050de596..b1ee5860d 100644
--- a/Demos/Host/LowLevel/MIDIHost/makefile
+++ b/Demos/Host/LowLevel/MIDIHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/MassStorageHost/makefile b/Demos/Host/LowLevel/MassStorageHost/makefile
index 756763249..0caa74929 100644
--- a/Demos/Host/LowLevel/MassStorageHost/makefile
+++ b/Demos/Host/LowLevel/MassStorageHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/MouseHost/makefile b/Demos/Host/LowLevel/MouseHost/makefile
index 31d1a85e0..4c9407b0c 100644
--- a/Demos/Host/LowLevel/MouseHost/makefile
+++ b/Demos/Host/LowLevel/MouseHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/MouseHostWithParser/makefile b/Demos/Host/LowLevel/MouseHostWithParser/makefile
index d42f45e5a..74a1d15c0 100644
--- a/Demos/Host/LowLevel/MouseHostWithParser/makefile
+++ b/Demos/Host/LowLevel/MouseHostWithParser/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/PrinterHost/makefile b/Demos/Host/LowLevel/PrinterHost/makefile
index 54108ade7..32ab7621a 100644
--- a/Demos/Host/LowLevel/PrinterHost/makefile
+++ b/Demos/Host/LowLevel/PrinterHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c
index 3029da831..5ca591578 100644
--- a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c
@@ -121,7 +121,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8
 	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

 }

 

-void PrintIncommingPackets(void)

+void PrintIncomingPackets(void)

 {

 	uint8_t ErrorCode;

 

@@ -263,7 +263,7 @@ void RNDIS_Host_Task(void)
 			USB_HostState = HOST_STATE_Configured;

 			break;

 		case HOST_STATE_Configured:

-			PrintIncommingPackets();

+			PrintIncomingPackets();

 		

 			break;

 	}

diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h
index 0110a2fbb..20a48ac10 100644
--- a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h
@@ -84,7 +84,7 @@
 

 	/* Function Prototypes: */

 		void SetupHardware(void);

-		void PrintIncommingPackets(void);

+		void PrintIncomingPackets(void);

 		void RNDIS_Host_Task(void);

 	

 		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);

diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/makefile b/Demos/Host/LowLevel/RNDISEthernetHost/makefile
index 32389b6f9..8bd97e091 100644
--- a/Demos/Host/LowLevel/RNDISEthernetHost/makefile
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/StillImageHost/makefile b/Demos/Host/LowLevel/StillImageHost/makefile
index 73cc35d7e..e830c7ae4 100644
--- a/Demos/Host/LowLevel/StillImageHost/makefile
+++ b/Demos/Host/LowLevel/StillImageHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/VirtualSerialHost/makefile b/Demos/Host/LowLevel/VirtualSerialHost/makefile
index 168b1b474..dc9604591 100644
--- a/Demos/Host/LowLevel/VirtualSerialHost/makefile
+++ b/Demos/Host/LowLevel/VirtualSerialHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/LUFA/Common/BoardTypes.h b/LUFA/Common/BoardTypes.h
index ccbd4750d..10e31ac1b 100644
--- a/LUFA/Common/BoardTypes.h
+++ b/LUFA/Common/BoardTypes.h
@@ -89,6 +89,18 @@
 

 			/** Selects the EVK527 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */

 			#define BOARD_EVK527        9

+			

+			/** Disables board drivers when operation will not be adversely affected (e.g. LEDs) - use of board drivers

+			 *  such as the Joystick driver, where the removal would adversely affect the code's operation is still disallowed. */

+			#define BOARD_NONE          10

+			

+			#if !defined(__DOXYGEN__)

+				#define BOARD_          BOARD_NONE

+				

+				#if !defined(BOARD)

+					#define BOARD       BOARD_NONE

+				#endif

+			#endif

 

 #endif

 

diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h
index d1de8d52e..4e7588c28 100644
--- a/LUFA/Drivers/Board/Buttons.h
+++ b/LUFA/Drivers/Board/Buttons.h
@@ -69,8 +69,8 @@
 	/* Includes: */

 	#include "../../Common/Common.h"

 	

-	#if !defined(BOARD)

-		#error BOARD must be set in makefile to a value specified in BoardTypes.h.

+	#if (BOARD == BOARD_NONE)

+		#error The Board Buttons driver cannot be used if the makefile BOARD option is not set.

 	#elif (BOARD == BOARD_USBKEY)

 		#include "USBKEY/Buttons.h"

 	#elif (BOARD == BOARD_STK525)

diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h
index 3174f1b6c..0197b3e2f 100644
--- a/LUFA/Drivers/Board/Dataflash.h
+++ b/LUFA/Drivers/Board/Dataflash.h
@@ -150,8 +150,8 @@
 			}

 

 		/* Includes: */

-			#if !defined(BOARD)

-				#error BOARD must be set in makefile to a value specified in BoardTypes.h.

+			#if (BOARD == BOARD_NONE)

+				#error The Board Buttons driver cannot be used if the makefile BOARD option is not set.

 			#elif (BOARD == BOARD_USBKEY)

 				#include "USBKEY/Dataflash.h"

 			#elif (BOARD == BOARD_STK525)

diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h
index 598307b72..be9d267cc 100644
--- a/LUFA/Drivers/Board/Joystick.h
+++ b/LUFA/Drivers/Board/Joystick.h
@@ -68,8 +68,8 @@
 	/* Includes: */

 	#include "../../Common/Common.h"

 	

-	#if !defined(BOARD)

-		#error BOARD must be set in makefile to a value specified in BoardTypes.h.

+	#if (BOARD == BOARD_NONE)

+		#error The Board Joystick driver cannot be used if the makefile BOARD option is not set.

 	#elif (BOARD == BOARD_USBKEY)

 		#include "USBKEY/Joystick.h"

 	#elif (BOARD == BOARD_STK525)

diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index 61f79ceec..222be0e65 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -76,8 +76,14 @@
 	/* Includes: */

 	#include "../../Common/Common.h"

 

-	#if !defined(BOARD)

-		#error BOARD must be set in makefile to a value specified in BoardTypes.h.

+	#if (BOARD == BOARD_NONE)

+		static inline void LEDs_Init(void) {};

+		static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) {};

+		static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) {};

+		static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) {};

+		static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask) {};

+		static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) {};

+		static inline uint8_t LEDs_GetLEDs(void) { return 0; }

 	#elif (BOARD == BOARD_USBKEY)

 		#include "USBKEY/LEDs.h"

 	#elif (BOARD == BOARD_STK525)

diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h
index 1b2baf2fb..86e0b66f0 100644
--- a/LUFA/Drivers/Board/Temperature.h
+++ b/LUFA/Drivers/Board/Temperature.h
@@ -63,8 +63,8 @@
 		#include "../../Common/Common.h"

 		#include "../Peripheral/ADC.h"

 	

-		#if !defined(BOARD)

-			#error BOARD must be set in makefile to a value specified in BoardTypes.h.	

+		#if (BOARD == BOARD_NONE)

+			#error The Board Temperature Sensor driver cannot be used if the makefile BOARD option is not set.

 		#elif ((BOARD != BOARD_USBKEY) && (BOARD != BOARD_STK525) && \

 		       (BOARD != BOARD_STK526) && (BOARD != BOARD_USER) &&   \

 			   (BOARD != BOARD_EVK527))

diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 63ffaecc8..521ab38f9 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -21,6 +21,8 @@
   *  - Added ADC MUX masks for the standard ADC input channels on all AVR models with an ADC, altered demos to use these masks

   *    as on some models, the channel number is not identical to its single-ended ADC MUX mask

   *  - New Webserver project, a RNDIS host USB webserver using the open source uIP TCP/IP network stack and FatFS library

+  *  - New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which

+  *    do not adversely affect the code operation (currently only the LEDs driver)

   *

   *  <b>Changed:</b>

   *  - Slowed down software USART carried PDI programming in the AVRISP project to prevent transmission errors

diff --git a/LUFA/ManPages/LUFAPoweredProjects.txt b/LUFA/ManPages/LUFAPoweredProjects.txt
index e16476882..dfcd712d6 100644
--- a/LUFA/ManPages/LUFAPoweredProjects.txt
+++ b/LUFA/ManPages/LUFAPoweredProjects.txt
@@ -46,7 +46,6 @@
  *  - Openkubus, an open source hardware-based authentication dongle: http://code.google.com/p/openkubus/

  *  - Orbee, a USB connected RGB Orb for notifications: http://www.franksworkshop.com.au/Electronics/Orbee/Orbee.htm

  *  - Programmable XBOX controller: http://richard-burke.dyndns.org/wordpress/pan-galactic-gargantuan-gargle-brain-aka-xbox-360-usb-controller/

- *  - Purdue Interactive Kiosk: https://engineering.purdue.edu/477grp4/

  *  - Reprap with LUFA, a LUFA powered 3D printer: http://code.google.com/p/at90usb1287-code-for-arduino-and-eclipse/

  *  - SEGA Megadrive/Genesis Development Cartridge: http://www.makestuff.eu/wordpress/?page_id=398

  *  - Stripe Snoop, a Magnetic Card reader: http://www.ossguy.com/ss_usb/

@@ -63,6 +62,7 @@
  *  - BAP, A tiny LUFA based AVR Programmer: http://www.busware.de/tiki-index.php?page=BAP

  *  - Digital Survey Instruments Magnetometer and Pointer: http://www.digitalsurveyinstruments.com/

  *  - Lightweight CC110x USB dongle for 868MHz Protocols: http://busware.de/tiki-index.php?page=CUL

+ *  - MIDIFighter, a USB-MIDI controller: http://www.midifighter.com/

  *  - Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3

  *  - SEGA Megadrive/Super Nintendo Cartridge Reader: http://www.snega2usb.com

  *  - XMEGA Development Board, using LUFA as an On-Board Programmer: http://xmega.mattair.net/

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
index c7e64a5eb..f327a47e8 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
@@ -66,7 +66,7 @@ static void TINYNVM_SendReadNVMRegister(const uint8_t Address)
  */

 static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)

 {

-	/* The TPI command for writing to the I/O space uses wierd addressing, where the I/O address's upper

+	/* The TPI command for writing to the I/O space uses weird addressing, where the I/O address's upper

 	 * two bits of the 6-bit address are shifted left once */

 	XPROGTarget_SendByte(TPI_CMD_SOUT | ((Address & 0x30) << 1) | (Address & 0x0F));

 }

diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile
index 5c0fe0f64..2698de881 100644
--- a/Projects/AVRISP-MKII/makefile
+++ b/Projects/AVRISP-MKII/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD = USBKEY

diff --git a/Projects/Benito/makefile b/Projects/Benito/makefile
index 2f0040304..8b9d126a9 100644
--- a/Projects/Benito/makefile
+++ b/Projects/Benito/makefile
@@ -63,7 +63,7 @@
 MCU = atmega32u2

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USER

diff --git a/Projects/Incomplete/StandaloneProgrammer/makefile b/Projects/Incomplete/StandaloneProgrammer/makefile
index 074a279ac..9305373d8 100644
--- a/Projects/Incomplete/StandaloneProgrammer/makefile
+++ b/Projects/Incomplete/StandaloneProgrammer/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Projects/LEDNotifier/makefile b/Projects/LEDNotifier/makefile
index 22a62b5e3..20cd598a6 100644
--- a/Projects/LEDNotifier/makefile
+++ b/Projects/LEDNotifier/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb646

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USER

diff --git a/Projects/Magstripe/makefile b/Projects/Magstripe/makefile
index 2571ad3a2..e2d87d800 100644
--- a/Projects/Magstripe/makefile
+++ b/Projects/Magstripe/makefile
@@ -63,10 +63,10 @@
 MCU = at90usb1287
 
 
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USER
+BOARD  = NONE
 
 
 # Processor frequency.
diff --git a/Projects/MissileLauncher/makefile b/Projects/MissileLauncher/makefile
index 5f8c3bc6f..66ab8cb2f 100644
--- a/Projects/MissileLauncher/makefile
+++ b/Projects/MissileLauncher/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Projects/TemperatureDataLogger/makefile b/Projects/TemperatureDataLogger/makefile
index a3da35ff3..622bb1c84 100644
--- a/Projects/TemperatureDataLogger/makefile
+++ b/Projects/TemperatureDataLogger/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Projects/USBtoSerial/makefile b/Projects/USBtoSerial/makefile
index 3bdc15bb1..1a1adc075 100644
--- a/Projects/USBtoSerial/makefile
+++ b/Projects/USBtoSerial/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Projects/Webserver/Lib/DHCPClientApp.c b/Projects/Webserver/Lib/DHCPClientApp.c
index 79170fabe..64cd70709 100644
--- a/Projects/Webserver/Lib/DHCPClientApp.c
+++ b/Projects/Webserver/Lib/DHCPClientApp.c
@@ -50,7 +50,7 @@ void DHCPClientApp_Init(void)
 	uip_ipaddr(&DHCPServerIPAddress, 255, 255, 255, 255);

 	AppState->DHCPClient.Connection = uip_udp_new(&DHCPServerIPAddress, HTONS(DHCPC_SERVER_PORT));

 	

-	/* If the connection was sucessfully created, bind it to the local DHCP client port */

+	/* If the connection was successfully created, bind it to the local DHCP client port */

 	if(AppState->DHCPClient.Connection != NULL)

 	{

 		uip_udp_bind(AppState->DHCPClient.Connection, HTONS(DHCPC_CLIENT_PORT));

@@ -240,7 +240,7 @@ uint8_t DHCPClientApp_SetOption(uint8_t* DHCPOptionList, uint8_t Option, uint8_t
  */

 bool DHCPClientApp_GetOption(uint8_t* DHCPOptionList, uint8_t Option, void* Destination)

 {

-	/* Look through the incomming DHCP packet's options list for the requested option */

+	/* Look through the incoming DHCP packet's options list for the requested option */

 	while (*DHCPOptionList != DHCP_OPTION_END)

 	{

 		/* Check if the current DHCP option in the packet is the one requested */

@@ -249,7 +249,7 @@ bool DHCPClientApp_GetOption(uint8_t* DHCPOptionList, uint8_t Option, void* Dest
 			/* Copy request option's data to the destination buffer */

 			memcpy(Destination, &DHCPOptionList[2], DHCPOptionList[1]);

 			

-			/* Indicate that the requested option data was sucessfully retrieved */

+			/* Indicate that the requested option data was successfully retrieved */

 			return true;

 		}

 		

@@ -257,7 +257,7 @@ bool DHCPClientApp_GetOption(uint8_t* DHCPOptionList, uint8_t Option, void* Dest
 		DHCPOptionList += (DHCPOptionList[1] + 2);

 	}

 	

-	/* Requested option not found in the incomming packet's DHCP options list */

+	/* Requested option not found in the incoming packet's DHCP options list */

 	return false;

 }

 #endif

diff --git a/Projects/Webserver/Lib/HTTPServerApp.c b/Projects/Webserver/Lib/HTTPServerApp.c
index 081207c6b..c2263cb98 100644
--- a/Projects/Webserver/Lib/HTTPServerApp.c
+++ b/Projects/Webserver/Lib/HTTPServerApp.c
@@ -150,7 +150,7 @@ void HTTPServerApp_Callback(void)
 	}		

 }

 

-/** HTTP Server State handler for the Request Process state. This state manages the processing of incomming HTTP

+/** HTTP Server State handler for the Request Process state. This state manages the processing of incoming HTTP

  *  GET requests to the server from the receiving HTTP client.

  */

 static void HTTPServerApp_OpenRequestedFile(void)

diff --git a/Projects/Webserver/Lib/HTTPServerApp.h b/Projects/Webserver/Lib/HTTPServerApp.h
index 13399b0f9..33a647bfe 100644
--- a/Projects/Webserver/Lib/HTTPServerApp.h
+++ b/Projects/Webserver/Lib/HTTPServerApp.h
@@ -64,7 +64,7 @@
 		} MIME_Type_t;

 	

 	/* Macros: */

-		/** TCP listen port for incomming HTTP traffic */

+		/** TCP listen port for incoming HTTP traffic */

 		#define HTTP_SERVER_PORT  80

 

 	/* Function Prototypes: */

diff --git a/Projects/Webserver/Lib/TELNETServerApp.h b/Projects/Webserver/Lib/TELNETServerApp.h
index 7b1eb46ee..ff34d1482 100644
--- a/Projects/Webserver/Lib/TELNETServerApp.h
+++ b/Projects/Webserver/Lib/TELNETServerApp.h
@@ -44,7 +44,7 @@
 		#include <uip.h>

 	

 	/* Macros: */

-		/** TCP listen port for incomming TELNET traffic */

+		/** TCP listen port for incoming TELNET traffic */

 		#define TELNET_SERVER_PORT  23

 		

 	/* Enums: */

diff --git a/Projects/Webserver/Lib/uIPManagement.c b/Projects/Webserver/Lib/uIPManagement.c
index 90629b893..c7773c455 100644
--- a/Projects/Webserver/Lib/uIPManagement.c
+++ b/Projects/Webserver/Lib/uIPManagement.c
@@ -30,7 +30,7 @@
 

 /** \file

  *

- *  uIP Managament functions. This file contains the functions and globals needed to maintain the uIP

+ *  uIP Management functions. This file contains the functions and globals needed to maintain the uIP

  *  stack once an RNDIS device has been attached to the system.

  */

 

@@ -87,7 +87,7 @@ void uIPManagement_ManageNetwork(void)
 {

 	if ((USB_CurrentMode == USB_MODE_HOST) && (USB_HostState == HOST_STATE_Configured))

 	{

-		uIPManagement_ProcessIncommingPacket();

+		uIPManagement_ProcessIncomingPacket();

 		uIPManagement_ManageConnections();

 	}

 }

@@ -123,8 +123,8 @@ void uIPManagement_UDPCallback(void)
 	}

 }

 

-/** Processes incomming packets to the server from the connected RNDIS device, creating responses as needed. */

-static void uIPManagement_ProcessIncommingPacket(void)

+/** Processes Incoming packets to the server from the connected RNDIS device, creating responses as needed. */

+static void uIPManagement_ProcessIncomingPacket(void)

 {

 	/* If no packet received, exit processing routine */

 	if (!(RNDIS_Host_IsPacketReceived(&Ethernet_RNDIS_Interface)))

@@ -132,7 +132,7 @@ static void uIPManagement_ProcessIncommingPacket(void)
 	  

 	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);

 

-	/* Read the incomming packet straight into the UIP packet buffer */

+	/* Read the Incoming packet straight into the UIP packet buffer */

 	RNDIS_Host_ReadPacket(&Ethernet_RNDIS_Interface, uip_buf, &uip_len);

 

 	/* If the packet contains an Ethernet frame, process it */

@@ -144,7 +144,7 @@ static void uIPManagement_ProcessIncommingPacket(void)
 				/* Filter packet by MAC destination */

 				uip_arp_ipin();

 

-				/* Process incomming packet */

+				/* Process Incoming packet */

 				uip_input();

 

 				/* If a response was generated, send it */

diff --git a/Projects/Webserver/Lib/uIPManagement.h b/Projects/Webserver/Lib/uIPManagement.h
index 1e7ffd0be..825c5cdef 100644
--- a/Projects/Webserver/Lib/uIPManagement.h
+++ b/Projects/Webserver/Lib/uIPManagement.h
@@ -69,7 +69,7 @@
 		void uIPManagement_UDPCallback(void);

 		

 		#if defined(INCLUDE_FROM_UIPMANAGEMENT_C)

-			static void uIPManagement_ProcessIncommingPacket(void);

+			static void uIPManagement_ProcessIncomingPacket(void);

 			static void uIPManagement_ManageConnections(void);

 		#endif

 		

diff --git a/Projects/Webserver/makefile b/Projects/Webserver/makefile
index daec03d0b..98ee03ca4 100644
--- a/Projects/Webserver/makefile
+++ b/Projects/Webserver/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Projects/XPLAINBridge/makefile b/Projects/XPLAINBridge/makefile
index 831d53bbd..ba87e8a1f 100644
--- a/Projects/XPLAINBridge/makefile
+++ b/Projects/XPLAINBridge/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = XPLAIN