lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt


1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79

/** \file
 *
 *  This file contains special DoxyGen information for the generation of the main page and other special
 *  documentation pages. It is not a project source file.
 */

/** \mainpage Combined Communications Device Class (Virtual Serial Port) and Mouse Demo
 *
 *  \section Sec_Compat Demo Compatibility:
 *
 *  The following list indicates what microcontrollers are compatible with this demo.
 *
 *  \li Series 7 USB AVRs (AT90USBxxx7)
 *  \li Series 6 USB AVRs (AT90USBxxx6)
 *  \li Series 4 USB AVRs (ATMEGAxxU4)
 *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
 *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
 *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
 *
 *  \section Sec_Info USB Information:
 *
 *  The following table gives a rundown of the USB utilization of this demo.
 *
 *  <table>
 *   <tr>
 *    <td><b>USB Mode:</b></td>
 *    <td>Device</td>
 *   </tr>
 *   <tr>
 *    <td><b>USB Class:</b></td>
 *    <td>Communications Device Class (CDC) \n
 *        Human Interface Device Class (HID)</td>
 *   </tr>
 *   <tr>
 *    <td><b>USB Subclass:</b></td>
 *    <td>Abstract Control Model (ACM) \n
 *        Mouse Subclass</td>
 *   </tr>
 *   <tr>
 *    <td><b>Relevant Standards:</b></td>
 *    <td>USBIF CDC Class Standard</td>
 *    <td>USBIF HID Specification \n
 *        USBIF HID Usage Tables</td>
 *   </tr>
 *   <tr>
 *    <td><b>Supported USB Speeds:</b></td>
 *    <td>Full Speed Mode</td>
 *   </tr>
 *  </table>
 *
 *  \section Sec_Description Project Description:
 *
 *  Combined Communications Device Class/Mouse demonstration application.
 *  This gives a simple reference application for implementing a combined
 *  CDC and HID device acting as a both a virtual serial port and a mouse.
 *  Joystick actions are transmitted to the host as strings and as mouse
 *  movements. The device does not respond to serial data sent from the host.
 *
 *  After running this demo for the first time on a new computer,
 *  you will need to supply the .INF file located in this demo
 *  project's directory as the device's driver when running under
 *  Windows. This will enable Windows to use its inbuilt CDC drivers,
 *  negating the need for custom drivers for the device. Other
 *  Operating Systems should automatically use their own inbuilt
 *  CDC-ACM drivers.
 *
 *  \section Sec_Options Project Options
 *
 *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
 *
 *  <table>
 *   <tr>
 *    <td>
 *     None
 *    </td>
 *   </tr>
 *  </table>
 */
/*
 * lib/bitmap.c
 * Helper functions for bitmap.h.
 *
 * This source code is licensed under the GNU General Public License,
 * Version 2.  See the file COPYING for more details.
 */
#include <xen/config.h>
#include <xen/types.h>
#include <xen/errno.h>
#include <xen/bitmap.h>
#include <xen/bitops.h>
#include <asm/uaccess.h>

/*
 * bitmaps provide an array of bits, implemented using an an
 * array of unsigned longs.  The number of valid bits in a
 * given bitmap does _not_ need to be an exact multiple of
 * BITS_PER_LONG.
 *
 * The possible unused bits in the last, partially used word
 * of a bitmap are 'don't care'.  The implementation makes
 * no particular effort to keep them zero.  It ensures that
 * their value will not affect the results of any operation.
 * The bitmap operations that return Boolean (bitmap_empty,
 * for example) or scalar (bitmap_weight, for example) results
 * carefully filter out these unused bits from impacting their
 * results.
 *
 * These operations actually hold to a slightly stronger rule:
 * if you don't input any bitmaps to these ops that have some
 * unused bits set, then they won't output any set unused bits
 * in output bitmaps.
 *
 * The byte ordering of bitmaps is more natural on little
 * endian architectures.  See the big-endian headers
 * include/asm-ppc64/bitops.h and include/asm-s390/bitops.h
 * for the best explanations of this ordering.
 */

int __bitmap_empty(const unsigned long *bitmap, int bits)
{
	int k, lim = bits/BITS_PER_LONG;
	for (k = 0; k < lim; ++k)
		if (bitmap[k])
			return 0;

	if (bits % BITS_PER_LONG)
		if (bitmap[k] & BITMAP_LAST_WORD_MASK(bits))
			return 0;

	return 1;
}
EXPORT_SYMBOL(__bitmap_empty);

int __bitmap_full(const unsigned long *bitmap, int bits)
{
	int k, lim = bits/BITS_PER_LONG;
	for (k = 0; k < lim; ++k)
		if (~bitmap[k])
			return 0;

	if (bits % BITS_PER_LONG)
		if (~bitmap[k] & BITMAP_LAST_WORD_MASK(bits))
			return 0;

	return 1;
}
EXPORT_SYMBOL(__bitmap_full);

int __bitmap_equal(const unsigned long *bitmap1,
		const unsigned long *bitmap2, int bits)
{
	int k, lim = bits/BITS_PER_LONG;
	for (k = 0; k < lim; ++k)
		if (bitmap1[k] != bitmap2[k])
			return 0;

	if (bits % BITS_PER_LONG)
		if ((bitmap1[k] ^ bitmap2[k]) & BITMAP_LAST_WORD_MASK(bits))
			return 0;

	return 1;
}
EXPORT_SYMBOL(__bitmap_equal);

void __bitmap_complement(unsigned long *dst, const unsigned long *src, int bits)
{
	int k, lim = bits/BITS_PER_LONG;
	for (k = 0; k < lim; ++k)
		dst[k] = ~src[k];

	if (bits % BITS_PER_LONG)
		dst[k] = ~src[k] & BITMAP_LAST_WORD_MASK(bits);
}
EXPORT_SYMBOL(__bitmap_complement);

/*
 * __bitmap_shift_right - logical right shift of the bits in a bitmap
 *   @dst - destination bitmap
 *   @src - source bitmap
 *   @nbits - shift by this many bits
 *   @bits - bitmap size, in bits
 *
 * Shifting right (dividing) means moving bits in the MS -> LS bit
 * direction.  Zeros are fed into the vacated MS positions and the
 * LS bits shifted off the bottom are lost.
 */
void __bitmap_shift_right(unsigned long *dst,
			const unsigned long *src, int shift, int bits)
{
	int k, lim = BITS_TO_LONGS(bits), left = bits % BITS_PER_LONG;
	int off = shift/BITS_PER_LONG, rem = shift % BITS_PER_LONG;
	unsigned long mask = (1UL << left) - 1;
	for (k = 0; off + k < lim; ++k) {
		unsigned long upper, lower;

		/*
		 * If shift is not word aligned, take lower rem bits of
		 * word above and make them the top rem bits of result.
		 */
		if (!rem || off + k + 1 >= lim)
			upper = 0;
		else {
			upper = src[off + k + 1];
			if (off + k + 1 == lim - 1 && left)
				upper &= mask;
		}
		lower = src[off + k];
		if (left && off + k == lim - 1)
			lower &= mask;
		dst[k] = upper << (BITS_PER_LONG - rem) | lower >> rem;
		if (left && k == lim - 1)
			dst[k] &= mask;
	}
	if (off)
		memset(&dst[lim - off], 0, off*sizeof(unsigned long));
}
EXPORT_SYMBOL(__bitmap_shift_right);


/*
 * __bitmap_shift_left - logical left shift of the bits in a bitmap
 *   @dst - destination bitmap
 *   @src - source bitmap
 *   @nbits - shift by this many bits
 *   @bits - bitmap size, in bits
 *
 * Shifting left (multiplying) means moving bits in the LS -> MS
 * direction.  Zeros are fed into the vacated LS bit positions
 * and those MS bits shifted off the top are lost.
 */

void __bitmap_shift_left(unsigned long *dst,
			const unsigned long *src, int shift, int bits)
{
	int k, lim = BITS_TO_LONGS(bits), left = bits % BITS_PER_LONG;
	int off = shift/BITS_PER_LONG, rem = shift % BITS_PER_LONG;
	for (k = lim - off - 1; k >= 0; --k) {
		unsigned long upper, lower;

		/*
		 * If shift is not word aligned, take upper rem bits of
		 * word below and make them the bottom rem bits of result.
		 */
		if (rem && k > 0)
			lower = src[k - 1];
		else
			lower = 0;
		upper = src[k];
		if (left && k == lim - 1)
			upper &= (1UL << left) - 1;
		dst[k + off] = lower  >> (BITS_PER_LONG - rem) | upper << rem;
		if (left && k + off == lim - 1)
			dst[k + off] &= (1UL << left) - 1;
	}
	if (off)
		memset(dst, 0, off*sizeof(unsigned long));
}
EXPORT_SYMBOL(__bitmap_shift_left);

void __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
				const unsigned long *bitmap2, int bits)
{
	int k;
	int nr = BITS_TO_LONGS(bits);

	for (k = 0; k < nr; k++)
		dst[k] = bitmap1[k] & bitmap2[k];
}
EXPORT_SYMBOL(__bitmap_and);

void __bitmap_or(unsigned long *dst, const unsigned long *bitmap1,
				const unsigned long *bitmap2, int bits)
{
	int k;
	int nr = BITS_TO_LONGS(bits);

	for (k = 0; k < nr; k++)
		dst[k] = bitmap1[k] | bitmap2[k];
}
EXPORT_SYMBOL(__bitmap_or);

void __bitmap_xor(unsigned long *dst, const unsigned long *bitmap1,
				const unsigned long *bitmap2, int bits)
{
	int k;
	int nr = BITS_TO_LONGS(bits);

	for (k = 0; k < nr; k++)
		dst[k] = bitmap1[k] ^ bitmap2[k];
}
EXPORT_SYMBOL(__bitmap_xor);

void __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
				const unsigned long *bitmap2, int bits)
{
	int k;
	int nr = BITS_TO_LONGS(bits);

	for (k = 0; k < nr; k++)
		dst[k] = bitmap1[k] & ~bitmap2[k];
}
EXPORT_SYMBOL(__bitmap_andnot);

int __bitmap_intersects(const unsigned long *bitmap1,
				const unsigned long *bitmap2, int bits)
{
	int k, lim = bits/BITS_PER_LONG;
	for (k = 0; k < lim; ++k)
		if (bitmap1[k] & bitmap2[k])
			return 1;

	if (bits % BITS_PER_LONG)
		if ((bitmap1[k] & bitmap2[k]) & BITMAP_LAST_WORD_MASK(bits))
			return 1;
	return 0;
}
EXPORT_SYMBOL(__bitmap_intersects);

int __bitmap_subset(const unsigned long *bitmap1,
				const unsigned long *bitmap2, int bits)
{
	int k, lim = bits/BITS_PER_LONG;
	for (k = 0; k < lim; ++k)
		if (bitmap1[k] & ~bitmap2[k])
			return 0;

	if (bits % BITS_PER_LONG)
		if ((bitmap1[k] & ~bitmap2[k]) & BITMAP_LAST_WORD_MASK(bits))
			return 0;
	return 1;
}
EXPORT_SYMBOL(__bitmap_subset);

#if BITS_PER_LONG == 32
int __bitmap_weight(const unsigned long *bitmap, int bits)
{
	int k, w = 0, lim = bits/BITS_PER_LONG;

	for (k = 0; k < lim; k++)
		w += hweight32(bitmap[k]);

	if (bits % BITS_PER_LONG)
		w += hweight32(bitmap[k] & BITMAP_LAST_WORD_MASK(bits));

	return w;
}
#else
int __bitmap_weight(const unsigned long *bitmap, int bits)
{
	int k, w = 0, lim = bits/BITS_PER_LONG;

	for (k = 0; k < lim; k++)
		w += hweight64(bitmap[k]);

	if (bits % BITS_PER_LONG)
		w += hweight64(bitmap[k] & BITMAP_LAST_WORD_MASK(bits));

	return w;
}
#endif
EXPORT_SYMBOL(__bitmap_weight);

/**
 *	bitmap_find_free_region - find a contiguous aligned mem region
 *	@bitmap: an array of unsigned longs corresponding to the bitmap
 *	@bits: number of bits in the bitmap
 *	@order: region size to find (size is actually 1<<order)
 *
 * This is used to allocate a memory region from a bitmap.  The idea is
 * that the region has to be 1<<order sized and 1<<order aligned (this
 * makes the search algorithm much faster).
 *
 * The region is marked as set bits in the bitmap if a free one is
 * found.
 *
 * Returns either beginning of region or negative error
 */
int bitmap_find_free_region(unsigned long *bitmap, int bits, int order)
{
	unsigned long mask;
	int pages = 1 << order;
	int i;

	if(pages > BITS_PER_LONG)
		return -EINVAL;

	/* make a mask of the order */
	mask = (1ul << (pages - 1));
	mask += mask - 1;

	/* run up the bitmap pages bits at a time */
	for (i = 0; i < bits; i += pages) {
		int index = i/BITS_PER_LONG;
		int offset = i - (index * BITS_PER_LONG);
		if((bitmap[index] & (mask << offset)) == 0) {
			/* set region in bimap */
			bitmap[index] |= (mask << offset);
			return i;
		}
	}
	return -ENOMEM;
}
EXPORT_SYMBOL(bitmap_find_free_region);

/**
 *	bitmap_release_region - release allocated bitmap region
 *	@bitmap: a pointer to the bitmap
 *	@pos: the beginning of the region
 *	@order: the order of the bits to release (number is 1<<order)
 *
 * This is the complement to __bitmap_find_free_region and releases
 * the found region (by clearing it in the bitmap).
 */
void bitmap_release_region(unsigned long *bitmap, int pos, int order)
{
	int pages = 1 << order;
	unsigned long mask = (1ul << (pages - 1));
	int index = pos/BITS_PER_LONG;
	int offset = pos - (index * BITS_PER_LONG);
	mask += mask - 1;
	bitmap[index] &= ~(mask << offset);
}
EXPORT_SYMBOL(bitmap_release_region);

int bitmap_allocate_region(unsigned long *bitmap, int pos, int order)
{
	int pages = 1 << order;
	unsigned long mask = (1ul << (pages - 1));
	int index = pos/BITS_PER_LONG;
	int offset = pos - (index * BITS_PER_LONG);

	/* We don't do regions of pages > BITS_PER_LONG.  The
	 * algorithm would be a simple look for multiple zeros in the
	 * array, but there's no driver today that needs this.  If you
	 * trip this BUG(), you get to code it... */
	BUG_ON(pages > BITS_PER_LONG);
	mask += mask - 1;
	if (bitmap[index] & (mask << offset))
		return -EBUSY;
	bitmap[index] |= (mask << offset);
	return 0;
}
EXPORT_SYMBOL(bitmap_allocate_region);