diff options
Diffstat (limited to 'lib/lufa/Bootloaders/MassStorage/makefile')
| -rw-r--r-- | lib/lufa/Bootloaders/MassStorage/makefile | 75 |
1 files changed, 75 insertions, 0 deletions
diff --git a/lib/lufa/Bootloaders/MassStorage/makefile b/lib/lufa/Bootloaders/MassStorage/makefile new file mode 100644 index 000000000..f3948e754 --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/makefile @@ -0,0 +1,75 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2017. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# -------------------------------------- +# LUFA Project Makefile. +# -------------------------------------- + +# Run "make help" for target help. + +MCU = at90usb1287 +ARCH = AVR8 +BOARD = USBKEY +F_CPU = 8000000 +F_USB = $(F_CPU) +OPTIMIZATION = s +TARGET = BootloaderMassStorage +SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) +LUFA_PATH = ../../LUFA +CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET) +LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS) + +# Flash size and bootloader section sizes of the target, in KB. These must +# match the target's total FLASH size and the bootloader size set in the +# device's fuses. +FLASH_SIZE_KB = 128 +BOOT_SECTION_SIZE_KB = 8 + +# Bootloader address calculation formulas +# Do not modify these macros, but rather modify the dependent values above. +CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) ) +BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 ) +BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) ) + +# Bootloader linker section flags for relocating the API table sections to +# known FLASH addresses - these should not normally be user-edited. +BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2)) +BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96) +BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32) +BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8) + +# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the +# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum +# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices. +ifeq ($(BOOT_SECTION_SIZE_KB),8) + CC_FLAGS += -DAUX_BOOT_SECTION_SIZE=0 +else + AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB)) + + CC_FLAGS += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)' + LD_FLAGS += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16)) + LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024) +endif + +# Default target +all: + +# Include LUFA-specific DMBS extension modules +DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA +include $(DMBS_LUFA_PATH)/lufa-sources.mk +include $(DMBS_LUFA_PATH)/lufa-gcc.mk + +# Include common DMBS build system modules +DMBS_PATH ?= $(LUFA_PATH)/Build/DMBS/DMBS +include $(DMBS_PATH)/core.mk +include $(DMBS_PATH)/cppcheck.mk +include $(DMBS_PATH)/doxygen.mk +include $(DMBS_PATH)/dfu.mk +include $(DMBS_PATH)/gcc.mk +include $(DMBS_PATH)/hid.mk +include $(DMBS_PATH)/avrdude.mk +include $(DMBS_PATH)/atprogram.mk |