diff options
Diffstat (limited to 'keyboards/kc60/keymaps/noroadsleft')
| -rw-r--r-- | keyboards/kc60/keymaps/noroadsleft/keymap.c | 83 | ||||
| -rw-r--r-- | keyboards/kc60/keymaps/noroadsleft/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/kc60/keymaps/noroadsleft/readme_ch1.md | 2 | ||||
| -rw-r--r-- | keyboards/kc60/keymaps/noroadsleft/readme_ch2.md | 2 | ||||
| -rw-r--r-- | keyboards/kc60/keymaps/noroadsleft/readme_ch3.md | 6 | ||||
| -rw-r--r-- | keyboards/kc60/keymaps/noroadsleft/readme_ch4.md | 4 | ||||
| -rw-r--r-- | keyboards/kc60/keymaps/noroadsleft/readme_ch5.md | 84 | ||||
| -rw-r--r-- | keyboards/kc60/keymaps/noroadsleft/readme_git.md | 62 |
8 files changed, 147 insertions, 98 deletions
diff --git a/keyboards/kc60/keymaps/noroadsleft/keymap.c b/keyboards/kc60/keymaps/noroadsleft/keymap.c index f28f2144f..ee1f69e91 100644 --- a/keyboards/kc60/keymaps/noroadsleft/keymap.c +++ b/keyboards/kc60/keymaps/noroadsleft/keymap.c @@ -1,4 +1,5 @@ #include QMK_KEYBOARD_H +#include "version.h" #include <sendstring_dvorak.h> //#include <sendstring_colemak.h> #include <print.h> @@ -84,19 +85,19 @@ enum custom_keycodes { Q2_ESC, Q2_GRV, MC_UNDO, - MC_PSTE + MC_PSTE, + NUBS_Z, + VRSN }; -// define modifiers -#define MODS_SHIFT_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) -#define MODS_CTRL_MASK (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTRL)) -#define MODS_ALT_MASK (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) -#define MODS_GUI_MASK (MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)) +/******************* +** MODIFIER MASKS ** +*******************/ +#define MOD_MASK_RALT (MOD_BIT(KC_RALT)) bool process_record_user(uint16_t keycode, keyrecord_t *record) { - uint8_t modifiers = get_mods(); switch(keycode) { // these are our macros! case F_CAPS: @@ -118,60 +119,49 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } }; return false; - break; case T_L3DED: if (record->event.pressed) { SEND_STRING("lavak3DED "); }; return false; - break; case G_PUSH: if (record->event.pressed) { SEND_STRING("git push origin "); }; return false; - break; case G_FTCH: if (record->event.pressed) { - SEND_STRING("git fetch upstream"); + if ( get_mods() & MOD_MASK_SHIFT ) { + clear_mods(); + SEND_STRING("git pull upstream "); + } else { + SEND_STRING("git fetch upstream "); + } }; return false; - break; case G_COMM: if (record->event.pressed) { SEND_STRING("git commit -m \"\"" SS_TAP(X_LEFT)); layer_off(_MACROS); }; return false; - break; - case G_RST: - if (record->event.pressed) { - SEND_STRING("git histt -n 10" SS_TAP(X_ENTER) "git reset --soft "); - layer_off(_MACROS); - }; - return false; - break; - case G_C10R: - if (record->event.pressed) { - SEND_STRING("cf/"); - layer_off(_MACROS); - }; - return false; - break; case G_BRCH: if (record->event.pressed) { - SEND_STRING("$(git branch-name)"); + if ( get_mods() & MOD_MASK_SHIFT ) { + clear_mods(); + SEND_STRING("master"); + } else { + SEND_STRING("$(git branch-name)"); + } layer_off(_MACROS); }; return false; - break; case SIGNA: if (record->event.pressed) { SEND_STRING("\\- @noroadsleft" SS_TAP(X_ENTER)); layer_off(_MACROS); }; return false; - break; case GO_Q2: if (record->event.pressed) { //default_layer_set(_QWERTY); @@ -180,7 +170,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { //layer_off(_SYSTEM); }; return false; - break; case Q2_ON: if (record->event.pressed) { SEND_STRING(SS_TAP(X_ENTER)); @@ -188,7 +177,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { layer_on(_QUAKE2_DVORAK); }; return false; - break; case Q2_OFF: if (record->event.pressed) { SEND_STRING(SS_TAP(X_ENTER)); @@ -196,7 +184,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { layer_on(_QUAKE2); }; return false; - break; case Q2_ESC: if (record->event.pressed) { SEND_STRING(SS_TAP(X_ESCAPE)); @@ -204,7 +191,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { layer_on(_QUAKE2); }; return false; - break; case Q2_GRV: if (record->event.pressed) { SEND_STRING(SS_TAP(X_GRAVE)); @@ -213,27 +199,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { layer_on(_QUAKE2_CONSOLE); }; return false; - break; case MC_UNDO: if (record->event.pressed) { - if ( modifiers & MODS_SHIFT_MASK ) { + if ( get_mods() & MOD_MASK_SHIFT ) { SEND_STRING( SS_DOWN(X_LSHIFT) SS_DOWN(X_LGUI) SS_TAP(X_Z) SS_UP(X_LGUI) SS_UP(X_LSHIFT) ); } else { SEND_STRING( SS_DOWN(X_LGUI) SS_TAP(X_Z) SS_UP(X_LGUI) ); } }; return false; - break; case MC_PSTE: if (record->event.pressed) { - if ( modifiers & MODS_SHIFT_MASK ) { + if ( get_mods() & MOD_MASK_SHIFT ) { SEND_STRING( SS_DOWN(X_LSHIFT) SS_DOWN(X_LGUI) SS_DOWN(X_LALT) SS_TAP(X_V) SS_UP(X_LALT) SS_UP(X_LGUI) SS_UP(X_LSHIFT) ); } else { SEND_STRING( SS_DOWN(X_LGUI) SS_TAP(X_V) SS_UP(X_LGUI) ); } }; return false; - break; + case NUBS_Z: + if (record->event.pressed) { + if ( get_mods() & MOD_MASK_RALT ) { + SEND_STRING( SS_TAP(X_NONUS_BSLASH) ); + } else { + SEND_STRING( SS_TAP(X_Z) ); + } + }; + return false; + case VRSN: + if (record->event.pressed) { + SEND_STRING( QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ); + } + return false; } // switch() return true; }; @@ -252,7 +249,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ FW_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LSFT, NUBS_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FW), KC_RCTL \ ), @@ -375,15 +372,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 TG(_MA), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ _______, _______, _______, G_PUSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, G_RST, G_FTCH, G_COMM, _______, _______, _______, _______, T_L3DED, _______, _______, _______, \ - _______, _______, _______, G_C10R, _______, G_BRCH, SIGNA, _______, _______, _______, _______, _______, \ + _______, _______, _______, G_FTCH, G_COMM, _______, _______, _______, _______, T_L3DED, _______, _______, _______, \ + _______, _______, _______, _______, _______, G_BRCH, SIGNA, _______, _______, _______, _______, _______, \ _______, _______, _______, _______, _______, _______, NO_CHNG, _______ \ ), /* System layer */ [_SYSTEM] = LAYOUT_60_ansi( // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - TG(_SY), TO(_QW), TO(_DV), TO(_CM), GO_Q2, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, DEBUG, XXXXXXX, XXXXXXX, XXXXXXX, \ + TG(_SY), TO(_QW), TO(_DV), TO(_CM), GO_Q2, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, DEBUG, XXXXXXX, VRSN, XXXXXXX, \ XXXXXXX, XXXXXXX, TG(_MC), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ XXXXXXX, XXXXXXX, XXXXXXX, BL_DEC, BL_TOGG, BL_INC, BL_BRTG, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ diff --git a/keyboards/kc60/keymaps/noroadsleft/readme.md b/keyboards/kc60/keymaps/noroadsleft/readme.md index 737fdc06b..59fbfd246 100644 --- a/keyboards/kc60/keymaps/noroadsleft/readme.md +++ b/keyboards/kc60/keymaps/noroadsleft/readme.md @@ -1,6 +1,6 @@ # @noroadsleft's KC60 keymap -### Last updated: September 2, 2018, 1:03 PM UTC-0700 +### Last updated: February 14, 2019, 3:50 AM UTC-0800  diff --git a/keyboards/kc60/keymaps/noroadsleft/readme_ch1.md b/keyboards/kc60/keymaps/noroadsleft/readme_ch1.md index bee0709f4..fff80760e 100644 --- a/keyboards/kc60/keymaps/noroadsleft/readme_ch1.md +++ b/keyboards/kc60/keymaps/noroadsleft/readme_ch1.md @@ -7,8 +7,6 @@ 4. [Function Layers](./readme_ch4.md) 5. [Other Layers](./readme_ch5.md) -### Last updated: September 2, 2018, 1:03 PM UTC-0700 - ---- diff --git a/keyboards/kc60/keymaps/noroadsleft/readme_ch2.md b/keyboards/kc60/keymaps/noroadsleft/readme_ch2.md index 75a4fc524..142fe302f 100644 --- a/keyboards/kc60/keymaps/noroadsleft/readme_ch2.md +++ b/keyboards/kc60/keymaps/noroadsleft/readme_ch2.md @@ -7,8 +7,6 @@ 4. [Function Layers](./readme_ch4.md) 5. [Other Layers](./readme_ch5.md) -### Last updated: September 2, 2018, 1:03 PM UTC-0700 - ---- diff --git a/keyboards/kc60/keymaps/noroadsleft/readme_ch3.md b/keyboards/kc60/keymaps/noroadsleft/readme_ch3.md index 80549ba5c..ebcb3cca8 100644 --- a/keyboards/kc60/keymaps/noroadsleft/readme_ch3.md +++ b/keyboards/kc60/keymaps/noroadsleft/readme_ch3.md @@ -7,8 +7,6 @@ 4. [Function Layers](./readme_ch4.md) 5. [Other Layers](./readme_ch5.md) -### Last updated: September 2, 2018, 1:03 PM UTC-0700 - ---- @@ -18,9 +16,9 @@ These layers were born out of the confusion I have had trying to use the in-game chat and the console in [Quake 2](https://en.wikipedia.org/wiki/Quake_II). When Quake 2 came out, alternate keyboard layouts weren't really a thing. As a result, all in-game text input is hard-locked to US QWERTY, regardless of what the operating system is using for its input method. -I'm attempting to solve this by some creative use of QMK's macro feature. The keycode in the System layer that enables these layers, [`GO_Q2`](./keymap.c#L386), is a [macro](./keymap.c#L175-183) that sets the default layer to the QWERTY layer, then turns the Quake 2 layer `_Q2` on. The result is a partially-overwritten QWERTY layer, that has some keycodes with some creative layer switching. +I'm attempting to solve this by some creative use of QMK's macro feature. The keycode in the System layer that enables these layers, [`GO_Q2`](./keymap.c#L383), is a [macro](./keymap.c#L165-172) that sets the default layer to the QWERTY layer, then turns the Quake 2 layer `_Q2` on. The result is a partially-overwritten QWERTY layer, that has some keycodes with some creative layer switching. -When I hit the `Enter` key (bound in-game to text chat), the [macro keycode](./keymap.c#L184-L191) I've created sends the keycode for `Enter`, then follows with enabling the Hardware Dvorak layer and its corresponding overlay. Now the game is in text chat mode, and my keyboard is in Dvorak. When I hit `Enter` again, another `Enter` [keycode macro](./keymap.c#L192-L199) is sent, which sends the message, then the macro brings me back to the standard QWERTY+Quake 2 setup. Hitting `Escape` instead runs a [macro](./keymap.c#L200-L207) that cancels the sending of the message, and undoes the layers. +When I hit the `Enter` key (bound in-game to text chat), the [macro keycode](./keymap.c#L173-L179) I've created sends the keycode for `Enter`, then follows with enabling the Hardware Dvorak layer and its corresponding overlay. Now the game is in text chat mode, and my keyboard is in Dvorak. When I hit `Enter` again, another `Enter` [keycode macro](./keymap.c#L180-L186) is sent, which sends the message, then the macro brings me back to the standard QWERTY+Quake 2 setup. Hitting `Escape` instead runs a [macro](./keymap.c#L187-L193) that cancels the sending of the message, and undoes the layers. I have been testing this configuration for a few months. Sometimes I end up still in Dvorak mode without any text input systems (in-game chat or the console) running, but it pretty much always happens when I'm focused on the game, so I don't know the cause yet. diff --git a/keyboards/kc60/keymaps/noroadsleft/readme_ch4.md b/keyboards/kc60/keymaps/noroadsleft/readme_ch4.md index f1b50846d..00e6b781b 100644 --- a/keyboards/kc60/keymaps/noroadsleft/readme_ch4.md +++ b/keyboards/kc60/keymaps/noroadsleft/readme_ch4.md @@ -7,8 +7,6 @@ 4. **Function Layers** 5. [Other Layers](./readme_ch5.md) -### Last updated: September 2, 2018, 1:03 PM UTC-0700 - ---- @@ -44,7 +42,7 @@ Based on the Windows function layer, but removes some functions that are pointle Keycode(s) Sent | Notes :-------------------------------- | :---- -[`Q2_GRV`](./keymap.c#L208-L216) | Sends `KC_GRV`, then enables the Dvorak, Quake 2 Dvorak, and Quake 2 Console layers. +[`Q2_GRV`](./keymap.c#L194-L201) | Sends `KC_GRV`, then enables the Dvorak, Quake 2 Dvorak, and Quake 2 Console layers. diff --git a/keyboards/kc60/keymaps/noroadsleft/readme_ch5.md b/keyboards/kc60/keymaps/noroadsleft/readme_ch5.md index 64102eb88..e5ee7cbde 100644 --- a/keyboards/kc60/keymaps/noroadsleft/readme_ch5.md +++ b/keyboards/kc60/keymaps/noroadsleft/readme_ch5.md @@ -7,8 +7,6 @@ 4. [Function Layers](./readme_ch4.md) 5. **Other Layers** -### Last updated: September 2, 2018, 1:03 PM UTC-0700 - ---- @@ -36,37 +34,79 @@ Tapping `Esc` exits the Macro layer, if the macro used doesn't do it automatical ### Macros -[](./keymap.c#L122-L127) -Inputs: `lavak3DED ` -Twitch emote for [a streamer I watch a lot](https://www.twitch.tv/lavak3_). +#### [T_L3DED](./keymap.c#L122-L126) + +Output: `lavak3DED ` + +Twitch emote for [a streamer I watch a lot](https://www.twitch.tv/lavak3_). + + +#### [G_PUSH](./keymap.c#L127-L131) + +Output: `git push origin ` -[G_PUSH](./keymap.c#L128-L133) -Inputs: `git push origin ` Everything from here down is related to Git or GitHub. -[G_FTCH](./keymap.c#L134-L139) -Inputs: `git fetch upstream` +#### [G_FTCH](./keymap.c#L132-L141) + +| Condition | Output | +| :-------- | :----- | +| If <kbd>Shift</kbd> is active | `git pull upstream ` | +| Otherwise | `git fetch upstream ` | + +#### [G_COMM](./keymap.c#L142-L147) + +Output: `git commit -m ""` <kbd>Left</kbd> -[G_COMM](./keymap.c#L140-L146) -Inputs: `git commit -m ""` `[Left]` Readies a `git commit` command, moves the cursor between the quotation marks, then disables the Macro layer. -[G_RST](./keymap.c#L147-L153) -Inputs: `git histt -n 10`, Enter, `git reset --soft ` -Runs a [git alias](./readme_git.md) that shows my last ten commits, then readies a `git reset --soft`. For when I commit something too soon. Disables the Macro layer when complete. +#### [G_BRCH](./keymap.c#L148-158) + +| Condition | Output | +| :-------- | :----- | +| If <kbd>Shift</kbd> is active | `master` | +| Otherwise | `$(git branch-name)` | -[G_C10R](./keymap.c#L154-L160) -Inputs: `cf/` -A branch prefix I use for my current work in QMK. Disables the Macro layer when finished. +`$(git branch-name)` is a [git alias](./readme_git.md) that returns the name of the current branch. This macro disables the Macro layer when finished. -[G_BRCH](./keymap.c#L161-L167) -Inputs: `$(git branch-name)` -A [git alias](./readme_git.md) that returns the name of the current branch. Disables the Macro layer when finished. +#### [SIGNA](./keymap.c#L159-L164) + +Output: `\- @noroadsleft` <kbd>Enter</kbd> -[SIGNA](./keymap.c#L168-L174) -Inputs: `\- @noroadsleft` `[Enter]` Sometimes on GitHub, I sign my comments. Types my GitHub name in Markdown syntax, and then taps the `Enter` key. Disables the Macro layer when finished. +#### [MC_UNDO](./keymap.c#L202-L210) + +| Condition | Output | +| :-------- | :----- | +| If <kbd>Shift</kbd> is active | <kbd>Shift</kbd> + <kbd>Command</kbd> + <kbd>Z</kbd> | +| Otherwise | <kbd>Command</kbd> + <kbd>Z</kbd> | + +An Undo shortcut that turns to Redo if <kbd>Shift</kbd> is being held. I'm not sure that part is required to get that behavior, but it works as desired, so I'm not messing with it. + +#### [MC_PSTE](./keymap.c#L211-L219) + +| Condition | Output | +| :-------- | :----- | +| If <kbd>Shift</kbd> is active | <kbd>Shift</kbd> + <kbd>Command</kbd> + <kbd>Option</kbd> + <kbd>V</kbd> | +| Otherwise | <kbd>Command</kbd> + <kbd>V</kbd> | + +The program I use this in uses <kbd>Shift</kbd> + <kbd>Command</kbd> + <kbd>Option</kbd> + <kbd>V</kbd> to paste while maintaining formatting (typeface, text size, etc.). Sometimes I want this and sometimes I don't. Using <kbd>Shift</kbd> changes the behavior. + +#### [NUBS_Z](./keymap.c#L220-L228) + +| Condition | Output | +| :-------- | :----- | +| If Right <kbd>Alt</kbd> is active | `KC_NUBS` | +| Otherwise | `KC_Z` | + +Sometimes I type in languages from countries that use ISO layout, but my keyboard is ANSI, so I have one key fewer. This macro simulates the Non-US Backslash key if I use Right Alt + Z. + +#### [VRSN](./keymap.c#L229-L233) + +Outputs a string that tells me the Git commit from which my flashed firmware was built. Looks something like: + + kc60/noroadsleft @ 0.6.240-20-ge91549-dirty ---- diff --git a/keyboards/kc60/keymaps/noroadsleft/readme_git.md b/keyboards/kc60/keymaps/noroadsleft/readme_git.md index 585d9c890..b81bb9409 100644 --- a/keyboards/kc60/keymaps/noroadsleft/readme_git.md +++ b/keyboards/kc60/keymaps/noroadsleft/readme_git.md @@ -4,46 +4,55 @@ ``` [alias] - # change branches + # Change branches co = checkout cob = checkout -b - # sync master - sync = "!f() { if [ $(git branch-name) != "master" ]; then git checkout master; fi; git pull upstream master; git push origin master; }; f" + # Cherry Pick + cp = cherry-pick + + # Check out a Pull Request + cop = "!f() { git fetch upstream pull/$1/head:pr/$1; git checkout pr/$1; }; f" + + # Sync master branch + sync = !git checkout master && git fetch upstream 2> /dev/null && git pull -n upstream master && git push origin master + + # Return the abbreviated SHA-1 of the last three commits, oldest to newest + rl = rev-list -n 3 --abbrev-commit --reverse HEAD + + # Add remote repo (for sending PRs to other forks, or checking out someone else's developments) + ar = "!f() { git remote add $1 https://github.com/$2/qmk_firmware.git; }; f" # Return the last five commits on the branch, in a more compact format - hist = log --pretty=format:\"%C(yellow)%h%Creset %Cgreen%ad%Creset%n %w(100,0,3)%s%d [%an]%n\" --graph --date=iso-local -n 5 - histm = log --pretty=format:\"%C(yellow)%h%Creset %w(100,0,3)%s%d [%an]\" --graph --date=iso-local -n 5 - histt = log --pretty=format:\"%C(yellow)%h%Creset %<(88,trunc)%s [%an]\" --graph --date=iso-local -n 5 - histb = log --reverse --pretty=format:\"- %<(98,trunc)%s [%an]\" --date=iso-local -n 5 + hist = log --pretty=format:\"%C(yellow)%h%Creset %Cgreen%ad%Creset %Cblue[%an%Cgreen% GK%Cblue]%C(yellow)%d%Creset%n %w(100,0,2)%s%n\" --graph --date=iso-local -n 5 + histt = log --pretty=format:\"* %C(yellow)%h%Creset %<(58,trunc)%s %Cblue%>(18,trunc)%an%Cgreen% G?%Creset @ %Cgreen%ad%Creset\" --date=iso-local -n 5 + histb = log --reverse --pretty=format:\"- %Cblue%>(20,trunc)%an %Creset%<(97,trunc)%s\" --date=iso-local -n 5 + + # Follow a file's filename history + follow = log --follow --name-only --pretty=format:\"%C(yellow)commit %H%Creset%d\nAuthor: %an <%ae>\nDate: %ad%n%n %s%n\" --date=iso-local # compact diff df = "diff --compact-summary" + # List all the files changed in a commit + dt = "diff-tree --no-commit-id --name-only -r" + # Short-form status - st = "!git status --short" + st = "!git status --short --untracked-files=no" # Returns the name of the current branch branch-name = "!git rev-parse --abbrev-ref HEAD" + bn = "!git branch-name" # short-form of the above - # short-form of the above - bn = "!git branch-name" + # Compare commit counts between current branch and QMK master + cc = "!f() { git fetch upstream; echo \"[0;32m$(git branch-name)[0m vs. [0;31mupstream/master[0m\"; git rev-list --left-right --count $(git branch-name)...upstream/master; }; f" - po = "push origin ($(git branch-name))" + # Push to origin repo + po = "push origin $(git branch-name)" # List the stashes sl = "stash list" - # Show the contents of a numbered stash - # Syntax: - # git st-show <int> - st-show = "!f() { git stash show stash@{$1} -p; }; f" - - # Apply a stash, without deleting it from the list of stashes - # Syntax: - # git st-copy <int> - st-copy = "!f() { git stash apply stash@{$1}; }; f" - # Unstage a file unstage = "reset HEAD" @@ -53,4 +62,15 @@ # Compare local master repo to its upstream branch. If anything is returned, local branch has diverged from upstream. cm = "!f() { git fetch upstream master; git diff $(git branch-name) upstream/master --compact-summary; }; f" cml = "!f() { git fetch upstream master; git diff $(git branch-name) upstream/master; }; f" + + # Delete a branch from local and remote + del-branch = "!f() { git branch -d $1; git push origin :$1; git fetch -p origin; }; f" + + # Rebase with signatures + rbv = rebase --exec 'git commit --amend --no-edit -n -S' -i + + # Force push without overwriting established history + pushf = push --force-with-lease + + ``` |