diff options
Diffstat (limited to 'keyboards/hadron/ver3/config.h')
| -rw-r--r-- | keyboards/hadron/ver3/config.h | 202 |
1 files changed, 202 insertions, 0 deletions
diff --git a/keyboards/hadron/ver3/config.h b/keyboards/hadron/ver3/config.h new file mode 100644 index 000000000..7db500304 --- /dev/null +++ b/keyboards/hadron/ver3/config.h @@ -0,0 +1,202 @@ +/* + * Copyright 2018 Jack Humbert <jack.humb@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef REV3_CONFIG_H +#define REV3_CONFIG_H + +/* USB Device descriptor parameter */ +#define DEVICE_VER 0x0003 + +#undef MATRIX_ROWS +#undef MATRIX_COLS +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + + +//Audio +#undef AUDIO_VOICES +#undef C6_AUDIO + +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(PLANCK_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND) \ + } +#define AUDIO_CLICKY + /* to enable clicky on startup */ + //#define AUDIO_CLICKY_ON +#define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f +#endif + +//configure qwiic micro_oled driver for the 128x32 oled +#ifdef QWIIC_MICRO_OLED_ENABLE + +#undef I2C_ADDRESS_SA0_1 +#define I2C_ADDRESS_SA0_1 0b0111100 +#define LCDWIDTH 128 +#define LCDHEIGHT 32 +#define micro_oled_rotate_180 + +#endif +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 6 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +/* Haptic Driver initialization settings + * Feedback Control Settings */ +#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/ +#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ +#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ + +/* default 3V ERM vibration motor voltage and library*/ +#if FB_ERM_LRA == 0 +#define RATED_VOLTAGE 3 +#define V_RMS 2.3 +#define V_PEAK 3.30 +/* Library Selection */ +#define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ + +/* default 2V LRA voltage and library */ +#elif FB_ERM_LRA == 1 +#define RATED_VOLTAGE 2 +#define V_RMS 2.0 +#define V_PEAK 2.85 +#define F_LRA 200 +/* Library Selection */ +#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ + +#endif + + +/* Control 1 register settings */ +#define DRIVE_TIME 25 +#define AC_COUPLE 0 +#define STARTUP_BOOST 1 + +/* Control 2 Settings */ +#define BIDIR_INPUT 1 +#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */ +#define SAMPLE_TIME 3 +#define BLANKING_TIME 1 +#define IDISS_TIME 1 + +/* Control 3 settings */ +#define NG_THRESH 2 +#define ERM_OPEN_LOOP 1 +#define SUPPLY_COMP_DIS 0 +#define DATA_FORMAT_RTO 0 +#define LRA_DRIVE_MODE 0 +#define N_PWM_ANALOG 0 +#define LRA_OPEN_LOOP 0 +/* Control 4 settings */ +#define ZC_DET_TIME 0 +#define AUTO_CAL_TIME 3 + +//#define RGBLIGHT_ANIMATIONS + +//#define RGBLED_NUM 10 +//#define RGB_DI_PIN B5 +//#define DRIVER_LED_TOTAL RGBLED_NUM + +//#define RGB_MATRIX_KEYPRESSES +#endif |