diff options
Diffstat (limited to 'keyboards/bpiphany')
77 files changed, 4420 insertions, 0 deletions
diff --git a/keyboards/bpiphany/frosty_flake/config.h b/keyboards/bpiphany/frosty_flake/config.h new file mode 100644 index 000000000..2c73f1074 --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/config.h @@ -0,0 +1,147 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Bathroom Epiphanies +#define PRODUCT frosty_flake +#define DESCRIPTION Frosty Flake controller for the CM Storm Quick Fire Rapid + +/* + * Frosty Flake Rev. 20140521 made by Bathroom Ephiphanies + * Ported from the Bathroom Epiphanies TMK Firmware: + * https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers + * + */ + +/* key matrix size */ +#define MATRIX_ROWS 8 // Row0 - Row7 in the schematic +#define MATRIX_COLS 18 // ColA - ColR in the schematic + +/* + * Keyboard Matrix Assignments + */ +#define UNUSED_PINS { B0, C4, D3 } + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/bpiphany/frosty_flake/frosty_flake.c b/keyboards/bpiphany/frosty_flake/frosty_flake.c new file mode 100644 index 000000000..1cd476038 --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/frosty_flake.c @@ -0,0 +1,63 @@ +#include "frosty_flake.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + DDRB |= (1<<7); + DDRC |= (1<<5) | (1<<6); + + print_dec(usb_led); + + if (usb_led & (1<<USB_LED_CAPS_LOCK)) + PORTC &= ~(1<<5); + else + PORTC |= (1<<5); + + if (usb_led & (1<<USB_LED_NUM_LOCK)) + PORTB &= ~(1<<7); + else + PORTB |= (1<<7); + + if (usb_led & (1<<USB_LED_SCROLL_LOCK)) + PORTC &= ~(1<<6); + else + PORTC |= (1<<6); + + led_set_user(usb_led); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +__attribute__ ((weak)) +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +__attribute__ ((weak)) +void led_set_user(uint8_t usb_led) { +}
\ No newline at end of file diff --git a/keyboards/bpiphany/frosty_flake/frosty_flake.h b/keyboards/bpiphany/frosty_flake/frosty_flake.h new file mode 100644 index 000000000..953172a8b --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/frosty_flake.h @@ -0,0 +1,106 @@ +#ifndef FROSTY_FLAKE_H +#define FROSTY_FLAKE_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array + +/* + Matrix col/row mapping + + ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. + | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 | + `----' `-------------------' `-------------------' `-------------------' `--------------' + ,-------------------------------------------------------------------------. ,--------------. ,-------------------. + | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 | + |-------------------------------------------------------------------------| |--------------| |-------------------| + | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 | + |-------------------------------------------------------------------------| '--------------' |-------------- | + | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | | K2 | L2 | Q2 | | + |-------------------------------------------------------------------------| ,----. |-------------------| + | N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | | K3 | L3 | Q3 | O3 | + |-------------------------------------------------------------------------| ,--------------. |-------------- | + | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6 | Q6 | | + `-------------------------------------------------------------------------' `--------------' `-------------------' +*/ +#define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{ \ +/* Columns and rows need to be swapped in the below definition */ \ +/* A B C D E F G H I J K L M N O P Q R */ \ +/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KQ0, KR0 }, \ +/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1, KC_NO, KC_NO, KC_NO, KC_NO, KQ1, KC_NO }, \ +/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KC_NO, KN2, KC_NO, KP2, KQ2, KR2 }, \ +/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KQ3, KR3 }, \ +/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \ +/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KC_NO, KC_NO, KO5, KC_NO, KQ5, KR5 }, \ +/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO, KC_NO, KO6, KC_NO, KQ6, KR6 }, \ +/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \ +} + +/* + Matrix col/row mapping (TKL) + + ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. + | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 | + `----' `-------------------' `-------------------' `-------------------' `--------------' + ,-------------------------------------------------------------------------. ,--------------. + | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | + |-------------------------------------------------------------------------| |--------------| + | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | + |-------------------------------------------------------------------------| '--------------' + | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | + |-------------------------------------------------------------------------| ,----. + | N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | + |-------------------------------------------------------------------------| ,--------------. + | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | + `-------------------------------------------------------------------------' `--------------' +*/ + +#define KEYMAP_TKL( \ + KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \ + KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, \ + KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, \ + KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, \ + KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, \ + KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0 \ +) \ +{ \ +/* Columns and rows need to be swapped in the below definition */ \ +/* A B C D E F G H I J K L M N O P Q R */ \ +/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KC_NO, KR0 }, \ +/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ +/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KC_NO, KC_NO, KC_NO, KN2, KC_NO, KP2, KC_NO, KR2 }, \ +/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KC_NO, KC_NO, KM3, KN3, KC_NO, KC_NO, KC_NO, KR3 }, \ +/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \ +/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KR5 }, \ +/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KC_NO, KC_NO, KC_NO, KO6, KC_NO, KC_NO, KR6 }, \ +/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \ +} + +#define LAYOUT_tkl_ansi( \ + KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \ + KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, \ + KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, \ + KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, \ + KN2, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, \ + KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0 \ +) KEYMAP_TKL( \ + KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \ + KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, \ + KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, \ + KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, \ + KN2, KC_NO, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, \ + KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0 \ +) + +#endif diff --git a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/config.h b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/config.h new file mode 100644 index 000000000..b25194014 --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/config.h @@ -0,0 +1,11 @@ + +#define TAPPING_TERM 150 //reduce time required to register a held key + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/keymap.c b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/keymap.c new file mode 100644 index 000000000..81899396a --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/keymap.c @@ -0,0 +1,132 @@ +#include "frosty_flake.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +enum QFR_layers { + _COLEMAK, + _QWERTY, + _DVORAK, + _LOWER, + _MOUSE +}; + +enum QFR_keycodes { + COLEMAK = SAFE_RANGE, + QWERTY, + DVORAK, + LOWER, + MOUSE +}; + +enum custom_macros { + R_PIPE, + R_POINT +}; + + const uint16_t PROGMEM fn_actions[] = { //ACTION_LAYER_TAP_TOGGLE requires that number of taps be defined in *config.h* - default set to 5 + [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), //Hold for momentary Lower layer, Tap for Space, + [1] = ACTION_LAYER_MOMENTARY(_MOUSE) //Hold for momentary MOUSE + + }; + +#define SPC_LW FUNC(0) +#define MSE FUNC(1) +#define PIPE M(R_PIPE) +#define POINT M(R_POINT) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_COLEMAK] = KEYMAP_TKL(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC,KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT , \ + KC_LSPO,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, \ + KC_LCTL,KC_LGUI, KC_LALT, SPC_LW, MSE, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT + ), + +[_QWERTY] = KEYMAP_TKL(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL,KC_LGUI,KC_LALT, SPC_LW, MSE, KC_RGUI , KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + +[_DVORAK] = KEYMAP_TKL(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_QUOT,KC_COMM,KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_BSPC,KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_QUOT, KC_ENT, \ + KC_LSFT,KC_NUBS,KC_SCLN,KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \ + KC_LCTL,KC_LGUI,KC_LALT, SPC_LW, MSE, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + +[_LOWER] = KEYMAP_TKL(\ + RESET, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_MPRV, KC_MNXT, _______, KC_MUTE, KC_VOLD, KC_VOLU, QWERTY, COLEMAK,DVORAK, \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LBRC, KC_RBRC, KC_UNDS, KC_PLUS, KC_BSPC, _______,_______,_______, \ + KC_TAB, KC_PGUP, KC_HOME, KC_UP, KC_END, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LCBR, KC_RCBR, KC_PIPE, _______,_______,_______, \ + KC_CAPS, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, \ + _______,XXXXXXX,POINT,PIPE, KC_LCBR, KC_LBRC, KC_GRV, KC_PIPE, KC_RBRC, KC_RCBR, _______, _______, _______, _______, \ + _______, _______, _______, _______, KC_RALT, _______, _______, _______, _______,_______,_______ \ + ), + +[_MOUSE] = KEYMAP_TKL(\ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,_______,_______, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, _______,_______,_______, \ + KC_TAB, KC_WH_U, KC_WH_L, KC_MS_U, KC_WH_R, XXXXXXX, XXXXXXX, KC_BTN3, KC_BTN4, KC_BTN5, XXXXXXX, KC_LBRC, KC_RBRC, KC_BSLS, _______,_______,_______, \ + KC_BSPC, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, XXXXXXX, KC_BTN1, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, _______, \ + _______,XXXXXXX,PIPE,POINT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, \ + _______, _______, _______, KC_ACL2, MSE, _______, _______, _______, _______,_______,_______ \ + ) +}; + +// Macros to send R pointer & dplyr pipe +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch(id) { + case R_POINT: + if (record->event.pressed) { // pointer + SEND_STRING("<- "); +// return MACRO(D(LSFT), T(COMM), U(LSFT), T(MINS), END); + } + break; + case R_PIPE: + if (record->event.pressed) { // dplyr pipe + SEND_STRING("%>% "); +// return MACRO(D(LSFT), T(5), T(DOT), T(5), U(LSFT), END); + } + break; + } + return MACRO_NONE; +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break; + } + return true; +}
\ No newline at end of file diff --git a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/readme.md b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/readme.md new file mode 100644 index 000000000..f12a0ffba --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/readme.md @@ -0,0 +1,86 @@ + +# TKL keymap for frosty\_flake +``` +make frosty_flake:QFR_JM + +dfu-programmer atmega32u2 erase +dfu-programmer atmega32u2 flash frosty_flake_QFR_JM.hex +dfu-programmer atmega32u2 start +``` + +##Layers +``` + ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. + |ESC | | F1 | F2 | F3 | F4 | | F5 | F6 | F7 | F8 | | F9 |F10 |F11 |F12 | |PrSc|ScLk|PsBk| + '----' '-------------------' '-------------------' '-------------------' '--------------' + ,-------------------------------------------------------------------------. ,--------------. + | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bspc | | Ins|Home|PgUp| + |-------------------------------------------------------------------------| |--------------| + | Tab | Q | W | F | P | G | J | L | U | Y | ; | [ | ] | \ | | Del|End |PgDn| + |-------------------------------------------------------------------------| '--------------' + | Bspc | A | R | S | T | D | H | N | E | I | O | ' | Enter | + |-------------------------------------------------------------------------| ,----. + | LSPO | Z | X | C | V | B | K | M | , | . | / | RSPC | | Up | + |-------------------------------------------------------------------------| ,--------------. + |Ctrl|LGUI|LAlt| Space/Lower |MSE |RGUI|Menu|Ctrl| |Left|Down|Rght| + '-------------------------------------------------------------------------' '--------------' + +``` +### Base Layer - Colemak +The base layout is Colemak by default, but this can be changed to QWERTY via the *LOWER* layer. +* I've implemented COLEMAK = SAFE\_RANGE when enumerating the custom\_keycodes, but I don't actually know what this does... + +* Space cadet is implemented in the shift keys (hold for shift, tap for respective parentheses) + +#### Layer Shifting +* The spacebar is a **TAP_KEY** macro - Hold for momentary *LOWER* layer, Tap for Space. +* The Right hand ALT key is a **TAP_TOGGLE** macro for the *MOUSE* layer (RAlt is accessible through LOWER, if you want...) + +### LOWER +``` + ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. + |ESC | | F1 | F2 | F3 | F4 | |>/|||Stop| << | >> | | F9 |MUTE|Vol-|Vol+| |QWTY|CLMK|PsBk| + '----' '-------------------' '-------------------' '-------------------' '--------------' + ,-------------------------------------------------------------------------. ,--------------. + | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | _ | + | Bspc | | Ins|Home|PgUp| + |-------------------------------------------------------------------------| |--------------| + | Tab |PgUp|Home| Up | End| | | | | | | { | } | | | | Del|End |PgDn| + |-------------------------------------------------------------------------| '--------------' + | Bckspc|PgDn|Left|Down|Rght| | | | | | | ' | Enter | + |-------------------------------------------------------------------------| ,----. + | LSPO | <- |%>% | { | [ | ` | | | ] | } | . | / | RSPC | | Up | + |-------------------------------------------------------------------------| ,--------------. + |Ctrl|LGUI|LAlt| |RAlt|RGUI|Menu|Ctrl| |Left|Down|Rght| + '-------------------------------------------------------------------------' '--------------' +``` +The *LOWER* layer contains a navigation cluster on the left hand. This layer is momentary when the spacebar or LOWER (RAlt) key is held and toggled on/off when the LOWER key is tapped. + +* The Navigation cluster is offset to the right compared to the traditional **WASD** nav cluster. With this implementation, you don't need to move your hand from the home position when navigating. Page Up & Down keys are found on the far left of the cluster. + +* All unused (blank on the above keymap) keys are locked out using the XXXXXXX filler (KC\_NO), all modifiers (edge |\_| keys \[except 0, \. & Fn\] on the above keymap) and the ZXCV cluster are transparent (\_\_\_\_\_\_\_) to the Base layer. + +* The base layer can be switched to QWERTY or COLEMAK by pressing the Pause Break or Scroll Lock keys respectively + +### MOUSE +``` + ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. + |ESC | | F1 | F2 | F3 | F4 | | F5 | F6 | F7 | F8 | | F9 |F10 |F11 |F12 | |PrSc|ScLk|PsBk| + '----' '-------------------' '-------------------' '-------------------' '--------------' + ,-------------------------------------------------------------------------. ,--------------. + | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Del | | Ins|Home|PgUp| + |-------------------------------------------------------------------------| |--------------| + | Tab | WhU| WhL| MsU| WhR| | | M3 | M4 | M5 | | [ | ] | \ | | Del|End |PgDn| + |-------------------------------------------------------------------------| '--------------' + | BSPC | WhD| MsL| MsD| MsR| | |LClk |RClk | | | ' | Enter | + |-------------------------------------------------------------------------| ,----. + | LSPO | Z | X | C | V | | | | , | . | / | RSPC | | Up | + |-------------------------------------------------------------------------| ,--------------. + |Ctrl|LGUI|LAlt| Accel ++ |MSE |RGUI|Menu|Ctrl| |Left|Down|Rght| + '-------------------------------------------------------------------------' '--------------' +``` +The *MOUSE* layer contains keys replicating functions found on the mouse. + +* The navigation cluster (Up, Down, Left, Right) is a replication of the Navigation cluster on the *LOWER* layer. The scroll keys are analagous to the Page Up & Downkeys. +* The primary click (right & left) buttons are on the right home row (index & middle fingers) +* Secondary click buttons are above the standard keys (M3/Wheel click, M4, M5) but I do not use this function. + diff --git a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/rules.mk new file mode 100644 index 000000000..0ae0b9646 --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/rules.mk @@ -0,0 +1,17 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/frosty_flake/keymaps/default/config.h b/keyboards/bpiphany/frosty_flake/keymaps/default/config.h new file mode 100644 index 000000000..8893d122e --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/bpiphany/frosty_flake/keymaps/default/keymap.c b/keyboards/bpiphany/frosty_flake/keymaps/default/keymap.c new file mode 100644 index 000000000..4dc7ed655 --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/default/keymap.c @@ -0,0 +1,11 @@ +#include "frosty_flake.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ + KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT) +};
\ No newline at end of file diff --git a/keyboards/bpiphany/frosty_flake/keymaps/default/readme.md b/keyboards/bpiphany/frosty_flake/keymaps/default/readme.md new file mode 100644 index 000000000..11bf4825f --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for frosty_flake diff --git a/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk new file mode 100644 index 000000000..9d3df5964 --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/config.h b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/config.h new file mode 100644 index 000000000..3f7852643 --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/config.h @@ -0,0 +1,23 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define TAPPING_TERM 200 +#define LEADER_TIMEOUT 800 + +#define DISABLE_SPACE_CADET_ROLLOVER + +#define UNICODE_TYPE_DELAY 0 + +#define LSPO_KEY KC_9 +#define RSPC_KEY KC_0 + +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_TIME_TO_MAX 60 +#define MOUSEKEY_MAX_SPEED 7 +#define MOUSEKEY_WHEEL_DELAY 0 +// place overrides here + +#endif diff --git a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/keymap.c b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/keymap.c new file mode 100644 index 000000000..bf7c5e588 --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/keymap.c @@ -0,0 +1,228 @@ +#include "frosty_flake.h" +#include "action_layer.h" +#include "eeconfig.h" +#include "process_unicode.h" +#include "process_unicodemap.h" +#include "quantum.h" + +#define _______ KC_TRNS +#define MAXEMOJITAPS 80 + + +//declarations for tap dancing emojis +void register_hex32(uint32_t hex); +void cycleEmojis(qk_tap_dance_state_t *state, void *user_data); +void cycleAnimals(qk_tap_dance_state_t *state, void *user_data); +void cycleFoods(qk_tap_dance_state_t *state, void *user_data); +void cycleEtc(qk_tap_dance_state_t *state, void *user_data); +void cycleAll(qk_tap_dance_state_t *state, void *user_data); + +void tap(uint16_t keycode){ + register_code(keycode); + unregister_code(keycode); +}; + +//Tap Dance Declarations +enum taps{ + TD_CTCPS = 0, + EMOJIS, + ANIMAL, + HAND, + MEMES, + COPA, + ALLS +}; + +enum unicode_name { + EMOTIS = 1,//80, //1F60x - 1F64x + ANIMALS, //64, //1F40x - 1F43x + SYMBOLS,// = 45, //1F300 - 1F32C + FOODS,// = 87 , //1F32D - + ETC,// = 192, //1F44x -1F4Fx + VEHICLES,// = 83, //1F68x - 1F6Dx + SUPPLEMENT,// = 32, //1F91x-1F92x + ALCHEMY,// = 116 //1F70x - 1F773 + +}; + +enum my_macros { + NEWDESK = 0, + LEFTDESK, + RIGHTDESK, + CLOSEDESK +}; + + +// Tap Dance Definitions +qk_tap_dance_action_t tap_dance_actions[] = { + // Tap once for CTRL, twice for Caps Lock + [TD_CTCPS] = ACTION_TAP_DANCE_DOUBLE(KC_LCTL, KC_CAPS), + [COPA] = ACTION_TAP_DANCE_DOUBLE(LCTL(KC_C), LCTL(KC_V)), + [EMOJIS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleEmojis, NULL, NULL, 800), + [ANIMAL] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleAnimals, NULL, NULL, 800), + //[SYMBOLS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleSymbols, NULL, NULL, 800), + [FOODS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleFoods, NULL, NULL, 800), + [ETC] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleEtc, NULL, NULL, 800), + //[VEHICLES] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleVehicles, NULL, NULL, 800), + //[SUPPLEMENT] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleSupplement, NULL, NULL, 800), + [ALLS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleAll, NULL, NULL, 800) +// Other declarations would go here, separated by commas, if you have them +}; + +// macros +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch(id) { + case NEWDESK: // this would trigger when you hit a key mapped as M(0) + if (record->event.pressed) { + return MACRO( I(1), D(LGUI), D(LCTL), D(D), U(LGUI), U(LCTL), U(D), END ); // NEW DESKTOP + } + break; + case LEFTDESK: // this would trigger when you hit a key mapped as M(0) + if (record->event.pressed) { + return MACRO( I(1), D(LGUI), D(LCTL), D(LEFT), U(LGUI), U(LCTL), U(LEFT), END ); // LEFT DESKTOP + } + break; + case RIGHTDESK: // this would trigger when you hit a key mapped as M(0) + if (record->event.pressed) { + return MACRO( I(1), D(LGUI), D(LCTL), D(RGHT), U(LGUI), U(LCTL), U(RGHT), END ); // RIGHT DESKTOP + } + break; + case CLOSEDESK: // this would trigger when you hit a key mapped as M(0) + if (record->event.pressed) { + return MACRO( I(1), D(LGUI), D(LCTL), D(F4), U(LGUI), U(LCTL), U(F4), END ); // CLOSE DESKTOP + } + break; + } + return MACRO_NONE; +}; + + +// emojis in unicode +const uint32_t PROGMEM unicode_map[] = { + [EMOTIS] = 0x1F600, + [ANIMALS] = 0x1F400, + [SYMBOLS] = 0x1F300, + [FOODS] = 0x1F32D, + [ETC] = 0x1F440, + [VEHICLES] = 0x1F680, + [SUPPLEMENT] = 0x1F910, + [ALCHEMY] = 0x1F700 + }; +// Layouts +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ + KC_LSPO,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSPC, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ + TD(TD_CTCPS),KC_LGUI,KC_LALT, KC_SPC, KC_LEAD,KC_RGUI, KC_APP,MO(1) , KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT), +[1] = KEYMAP(\ + TD(ALLS), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, TD(EMOJIS),TD(ANIMAL),TD(ETC),TD(FOODS), KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_MPRV,KC_MPLY,KC_MNXT, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ + KC_TAB, KC_Q, M(0), KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_UP ,KC_RBRC,KC_BSLS, KC_MUTE,KC_VOLD,KC_VOLU, KC_P7, KC_P8, KC_P9,KC_PPLS, \ + KC_LCTL, M(1), M(3), M(2), KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_LEFT,KC_RGHT, KC_ENT, KC_P4, KC_P5, KC_P6, \ + KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_DOWN, KC_RSFT, KC_MS_U, KC_P1, KC_P2, KC_P3,KC_PENT, \ + KC_BTN1,KC_BTN3,KC_BTN2, KC_SPC, KC_RALT,KC_RGUI, TG(2),_______ , KC_MS_L,KC_MS_D,KC_MS_R, KC_P0,KC_PDOT), +[2] = KEYMAP(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_MPRV,KC_MPLY,KC_MNXT, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_MUTE,KC_VOLD,KC_VOLU, KC_P7, KC_P8, KC_P9,KC_PPLS, \ + KC_LCTL, KC_D, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ + KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_MS_U, KC_P1, KC_P2, KC_P3,KC_PENT, \ + KC_BTN1,KC_BTN3,KC_BTN2, KC_SPC, KC_RALT,KC_RGUI, TG(2) , KC_NO , KC_MS_L,KC_MS_D,KC_MS_R, KC_P0,KC_PDOT), +}; + +LEADER_EXTERNS(); + +void matrix_scan_user(void) { + LEADER_DICTIONARY() { + leading = false; + leader_end(); + + SEQ_TWO_KEYS(KC_A, KC_A) { // select all and copy + register_code(KC_LCTL); + tap(KC_A); + tap(KC_C); + unregister_code(KC_LCTL); + } + } +} + +void matrix_init_user(void) { + _delay_ms(500); + set_unicode_input_mode(UC_WINC); +}; + +void cycleAll(qk_tap_dance_state_t *state, void *user_data) { + if(state->count == 1) { + unicode_input_start(); + register_hex32(pgm_read_dword(&unicode_map[EMOTIS])); + unicode_input_finish(); + } + else if(state->count <= 1642) { + tap(KC_BSPC); + unicode_input_start(); + register_hex32(pgm_read_dword(&unicode_map[1])+state->count); + unicode_input_finish(); + } +}; + + +void cycleEmojis(qk_tap_dance_state_t *state, void *user_data) { + if(state->count == 1) { + unicode_input_start(); + register_hex32(pgm_read_dword(&unicode_map[EMOTIS])); + unicode_input_finish(); + } + else if(state->count <= 80) { + tap(KC_BSPC); + unicode_input_start(); + register_hex32(pgm_read_dword(&unicode_map[EMOTIS])+state->count); + unicode_input_finish(); + } +}; + +void cycleAnimals(qk_tap_dance_state_t *state, void *user_data) { + if(state->count == 1) { + unicode_input_start(); + register_hex32(pgm_read_dword(&unicode_map[ANIMALS])); + unicode_input_finish(); + } + else if(state->count <= MAXEMOJITAPS) { + tap(KC_BSPC); + unicode_input_start(); + register_hex32(pgm_read_dword(&unicode_map[ANIMALS])+state->count); + unicode_input_finish(); + } +}; + +void cycleFoods(qk_tap_dance_state_t *state, void *user_data) { + if(state->count == 1) { + unicode_input_start(); + register_hex32(pgm_read_dword(&unicode_map[FOODS])); + unicode_input_finish(); + } + else if(state->count <= 87) { + tap(KC_BSPC); + unicode_input_start(); + register_hex32(pgm_read_dword(&unicode_map[FOODS])+state->count); + unicode_input_finish(); + } +}; + + +void cycleEtc(qk_tap_dance_state_t *state, void *user_data) { + if(state->count == 1) { + unicode_input_start(); + register_hex32(pgm_read_dword(&unicode_map[ETC])); + unicode_input_finish(); + } + else if(state->count <= MAXEMOJITAPS) { + tap(KC_BSPC); + unicode_input_start(); + register_hex32(pgm_read_dword(&unicode_map[ETC])+state->count); + unicode_input_finish(); + } +}; + diff --git a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/readme.md b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/readme.md new file mode 100644 index 000000000..0b01f9dbf --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/readme.md @@ -0,0 +1,24 @@ +# The Nikchi's keymap for frosty_flake + +### FEATURING +-SPACE CADET +-Caps Lock is now LCTRL +-LCTRL is Tap(LCTRL, Caps Lock) + +### LEADER KEY - RALT +COMBOS +-a,a => Select All, Copy + + + +### FN REBINDS for Windows +``` + [W] [New Desktop] +[A][S][D] [Left Desk][Delete Desk][Right Desk] + +[Ins][Hom][PUp] [RW][PP][FF] +[Del][End][PDn] [MU][VD][VU] + +Arrows are Mouskeys, left three mods are clicks + +```
\ No newline at end of file diff --git a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/rules.mk new file mode 100644 index 000000000..b21eb6404 --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/rules.mk @@ -0,0 +1,24 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +UNICODEMAP_ENABLE = yes # unicodemap +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +TAP_DANCE_ENABLE = yes +LEADER_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/bpiphany/frosty_flake/keymaps/nikchi/variableTapDance.md b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/variableTapDance.md new file mode 100644 index 000000000..b2e504139 --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/nikchi/variableTapDance.md @@ -0,0 +1,9 @@ +# Tap Dancing to different beats. +Tap Dance is constrained normally by `TAPPING_TERM` defined in your keyboard's config.h This proves to be challenging to work with when sometimes you just need more time to tap out your dance, or even a different "beat". + + + +- `ACTION_TAP_DANCE_FN_ADVANCED_TIME(user_fn_on_each_tap, user_fn_on_dance_finished, user_fn_on_dance_reset, tap_specific_tapping_term)` : This works the same as `ACTION_TAP_DANCE_FN_ADVANCED` just with the extra `tap_specific_tapping_term` arguement at the end. This way you can set a specific tap dance to have a longer or shorter tap in between your taps, giving you more, or less, time in between each tap. + + +`tap_specific_tapping_term` should be the same type and range of values that one would put into the `TAPPING_TERM` definition in the config.h file. diff --git a/keyboards/bpiphany/frosty_flake/keymaps/tkl/config.h b/keyboards/bpiphany/frosty_flake/keymaps/tkl/config.h new file mode 100644 index 000000000..8893d122e --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/tkl/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/bpiphany/frosty_flake/keymaps/tkl/keymap.c b/keyboards/bpiphany/frosty_flake/keymaps/tkl/keymap.c new file mode 100644 index 000000000..99dc95627 --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/tkl/keymap.c @@ -0,0 +1,11 @@ +#include "frosty_flake.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP_TKL(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ) +}; diff --git a/keyboards/bpiphany/frosty_flake/keymaps/tkl/readme.md b/keyboards/bpiphany/frosty_flake/keymaps/tkl/readme.md new file mode 100644 index 000000000..a076a65de --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/tkl/readme.md @@ -0,0 +1 @@ +# TKL keymap for frosty_flake diff --git a/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk new file mode 100644 index 000000000..f29756f22 --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk @@ -0,0 +1,17 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/frosty_flake/matrix.c b/keyboards/bpiphany/frosty_flake/matrix.c new file mode 100644 index 000000000..480e3455b --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/matrix.c @@ -0,0 +1,155 @@ +/* + Copyright 2017 Gabriel Young <gabeplaysdrums@live.com> + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + +#ifndef DEBOUNCING_DELAY +# define DEBOUNCING_DELAY 5 +#endif +static uint8_t debouncing = DEBOUNCING_DELAY; + +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +static matrix_row_t scan_col(void) { + return ( + (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<0)) | + (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<1)) | + (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<2)) | + (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<3)) | + (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<4)) | + (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<5)) | + (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<6)) | + (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<7)) + ); +} + +static void select_col(uint8_t col) { + switch (col) { + case 0: PORTD = (PORTD & ~0b01111011) | 0b00011011; break; + case 1: PORTD = (PORTD & ~0b01111011) | 0b01000011; break; + case 2: PORTD = (PORTD & ~0b01111011) | 0b01101010; break; + case 3: PORTD = (PORTD & ~0b01111011) | 0b01111001; break; + case 4: PORTD = (PORTD & ~0b01111011) | 0b01100010; break; + case 5: PORTD = (PORTD & ~0b01111011) | 0b01110001; break; + case 6: PORTD = (PORTD & ~0b01111011) | 0b01100001; break; + case 7: PORTD = (PORTD & ~0b01111011) | 0b01110000; break; + case 8: PORTD = (PORTD & ~0b01111011) | 0b01100000; break; + case 9: PORTD = (PORTD & ~0b01111011) | 0b01101000; break; + case 10: PORTD = (PORTD & ~0b01111011) | 0b00101011; break; + case 11: PORTD = (PORTD & ~0b01111011) | 0b00110011; break; + case 12: PORTD = (PORTD & ~0b01111011) | 0b00100011; break; + case 13: PORTD = (PORTD & ~0b01111011) | 0b01111000; break; + case 14: PORTD = (PORTD & ~0b01111011) | 0b00010011; break; + case 15: PORTD = (PORTD & ~0b01111011) | 0b01101001; break; + case 16: PORTD = (PORTD & ~0b01111011) | 0b00001011; break; + case 17: PORTD = (PORTD & ~0b01111011) | 0b00111011; break; + } +} + +void matrix_init(void) { + /* Row output pins */ + DDRD |= 0b01111011; + /* Column input pins */ + DDRC &= ~0b10000000; + DDRB &= ~0b01111111; + PORTC |= 0b10000000; + PORTB |= 0b01111111; + + for (uint8_t i=0; i < MATRIX_ROWS; i++) + matrix[i] = matrix_debouncing[i] = 0; + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + select_col(col); + _delay_us(3); + matrix_row_t col_scan = scan_col(); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col); + bool curr_bit = col_scan & (1<<row); + if (prev_bit != curr_bit) { + matrix_debouncing[row] ^= ((matrix_row_t)1<<col); + debouncing = DEBOUNCING_DELAY; + } + } + } + + if (debouncing) { + if (--debouncing) + _delay_ms(1); + else + for (uint8_t i = 0; i < MATRIX_ROWS; i++) + matrix[i] = matrix_debouncing[i]; + } + + matrix_scan_quantum(); + return 1; +} + +inline matrix_row_t matrix_get_row(uint8_t row) { + return matrix[row]; +} + +void matrix_print(void) { +#ifndef NO_PRINT + print("\nr\\c ABCDEFGHIJKLMNOPQR\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + matrix_row_t matrix_row = matrix_get_row(row); + xprintf("%02X: ", row); + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + bool curr_bit = matrix_row & (1<<col); + xprintf("%c", curr_bit ? '*' : '.'); + } + print("\n"); + } +#endif +} + +uint8_t matrix_key_count(void) { + uint8_t count = 0; + for (uint8_t row = 0; row < MATRIX_ROWS; row++) + count += bitpop32(matrix[row]); + return count; +} diff --git a/keyboards/bpiphany/frosty_flake/readme.md b/keyboards/bpiphany/frosty_flake/readme.md new file mode 100644 index 000000000..0d6a4779f --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/readme.md @@ -0,0 +1,43 @@ +# Frosty Flake Controller + +This is the firmware for Rev. 20140521 of the Frosty Flake controller +by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), +a replacement controller for the [Cooler Master Quick Fire +Rapid](http://www.coolermaster.com/peripheral/keyboards/quickfirerapid/). + +The code was adapted from the [BathroomEpiphanies TMK +Firmware](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers), +but has been cleaned up to match the +[schematic](https://deskthority.net/wiki/File:Frosty_Flake_Schematics.pdf) +and gone through some minor refactoring for QMK. + +## 104 and 87 layout support + +Support for both 104 key and 87 key layouts is provided. See the +keymaps `default` (104) and `tkl` (87) for example layouts. + +Keyboard Maintainer: QMK Community +Hardware Supported: Frosty Flake +Hardware Availability: https://1upkeyboards.com/qfr-frosty-flake-controller.html + +Make example for this keyboard (after setting up your build environment): + +104 key default layout: + +``` +make bpiphany/frosty_flake:default +``` + +To directly flash the frosty_flake after compiling use + +``` +make bpiphany/frosty_flake:default:dfu +``` + +87 key tkl layout: + +``` +make bpiphany/frosty_flake:tkl:dfu +``` + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bpiphany/frosty_flake/rules.mk b/keyboards/bpiphany/frosty_flake/rules.mk new file mode 100644 index 000000000..94619e03d --- /dev/null +++ b/keyboards/bpiphany/frosty_flake/rules.mk @@ -0,0 +1,73 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI controls +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +CUSTOM_MATRIX = yes +SRC += matrix.c + +LAYOUTS = tkl_ansi diff --git a/keyboards/bpiphany/kitten_paw/config.h b/keyboards/bpiphany/kitten_paw/config.h new file mode 100644 index 000000000..d7089734a --- /dev/null +++ b/keyboards/bpiphany/kitten_paw/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6050 +#define DEVICE_VER 0x0104 +#define MANUFACTURER Costar +#define PRODUCT Majestouch + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 18 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +//#define MATRIX_ROW_PINS { D0, D5 } +//#define MATRIX_COL_PINS { F1, F0, B0 } +//#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/bpiphany/kitten_paw/info.json b/keyboards/bpiphany/kitten_paw/info.json new file mode 100644 index 000000000..7d2574710 --- /dev/null +++ b/keyboards/bpiphany/kitten_paw/info.json @@ -0,0 +1,18 @@ +{ + "keyboard_name": "Kitten Paw", + "url": "", + "maintainer": "qmk", + "width": 22.5, + "height": 6.5, + "layouts": { + "LAYOUT": { + "key_count": 105, + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"KC_NUBS", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}] + }, + + "LAYOUT_fullsize_ansi": { + "key_count": 104, + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}] + } + } +} diff --git a/keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c b/keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c new file mode 100644 index 000000000..6767f0414 --- /dev/null +++ b/keyboards/bpiphany/kitten_paw/keymaps/default/keymap.c @@ -0,0 +1,51 @@ +#include QMK_KEYBOARD_H + +enum layers { + DEFAULT, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [DEFAULT] = LAYOUT(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ + KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT) +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +}
\ No newline at end of file diff --git a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/config.h b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/config.h new file mode 100644 index 000000000..142aba890 --- /dev/null +++ b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/config.h @@ -0,0 +1,31 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#undef MOUSEKEY_MOVE_MAX +#define MOUSEKEY_MOVE_MAX 127 +#undef MOUSEKEY_WHEEL_MAX +#define MOUSEKEY_WHEEL_MAX 110 +#undef MOUSEKEY_MOVE_DELTA +#define MOUSEKEY_MOVE_DELTA 5 +#undef MOUSEKEY_WHEEL_DELTA +#define MOUSEKEY_WHEEL_DELTA 1 +#undef MOUSEKEY_DELAY +#define MOUSEKEY_DELAY 50 +#undef MOUSEKEY_INTERVAL +#define MOUSEKEY_INTERVAL 20 +#undef MOUSEKEY_MAX_SPEED +#define MOUSEKEY_MAX_SPEED 4 +#undef MOUSEKEY_TIME_TO_MAX +#define MOUSEKEY_TIME_TO_MAX 30 +#undef MOUSEKEY_WHEEL_MAX_SPEED +#define MOUSEKEY_WHEEL_MAX_SPEED 3 +#undef MOUSEKEY_WHEEL_TIME_TO_MAX +#define MOUSEKEY_WHEEL_TIME_TO_MAX 255 +#undef ONESHOT_TIMEOUT +#define ONESHOT_TIMEOUT 500 +#undef TAPPING_TOGGLE +#define TAPPING_TOGGLE 2 + +#endif diff --git a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c new file mode 100644 index 000000000..856cef9cc --- /dev/null +++ b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c @@ -0,0 +1,242 @@ +#include QMK_KEYBOARD_H +#include "mousekey.h" + +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define C(kc) LCTL(KC_##kc) +#define RA(kc) RALT(KC_##kc) +#define KC_SLCT KC_SELECT +#define MEDAPP LT(MEDIA, KC_APP) +#undef S +#define S(kc) LSFT(KC_##kc) + +uint8_t current_layer_global = 255; + +enum layers { + DEFAULT, + PROG1, + PROG2, + MEDIA, + MOUSE1, + MOUSE2, + MISC, +}; + +enum function_id { + LSHFT_PAREN, + RSHFT_PAREN, + LCTRL_BRACKET, + RCTRL_BRACKET, + LALT_CURLY, + RALT_CURLY, + CTRL_CLICK +}; + +enum macro_id { + GRV, + CFLEX +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [DEFAULT] = LAYOUT(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ + F(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ + F(8),KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, F(9), KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ + F(1),KC_LGUI, F(3), LT(MISC, KC_SPC), F(4), F(5), MEDAPP, F(2), KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT), + /* Layer 1: Programming Layer 1, emulating US l ayout */ + [PROG1] = LAYOUT(\ + KC_ESC,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + M(GRV),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_SLSH, S(0),_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______, KC_Z,_______,_______,_______,_______, RA(8), RA(9),RA(MINS), _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,S(COMM),S(BSLS), _______, _______,_______,_______, \ + MO(PROG2),_______, KC_Y,_______,_______,_______,_______,_______,_______,_______,_______, S(7), MO(PROG2), _______, _______,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______), + /* Layer 2: programming layer 2 + all keys that are not FN keys are sent as LSFT+key on this layer + */ + [PROG2] = LAYOUT(\ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + RA(RBRC),_______, RA(Q),KC_BSLS,_______,_______,M(CFLEX), S(6),S(RBRC), S(8), S(9),S(SLSH),KC_RBRC,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, RA(7), RA(0),RA(NUBS), _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, S(DOT), S(2), _______, _______,_______,_______, \ + _______,S(NUBS),_______,_______,_______,_______,_______,_______,_______,KC_NUBS,S(NUBS),S(MINS), _______, _______, _______,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______), + /* Layer 3: media layer */ + [MEDIA] = LAYOUT(\ + KC_PWR,KC_SLEP,KC_WAKE,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX, \ + XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, KC_MPRV,KC_MPLY,KC_MNXT, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \ + XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, KC_VOLD,KC_MUTE,KC_VOLU, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \ + XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX, \ + XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, KC_EJCT, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \ + XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,_______,XXXXXXX, KC_MRWD,KC_MSTP,KC_MFFD, XXXXXXX,XXXXXXX), + /* Layer 4: Mouse layer */ + [MOUSE1] = LAYOUT(\ + F(6),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + _______,KC_ACL0,KC_ACL1,KC_ACL2,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,KC_BTN4,KC_WH_D,KC_MS_U,KC_WH_U,_______, C(Z),_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,KC_BTN5,KC_MS_L,KC_MS_D,KC_MS_R, F(7),KC_WH_L,KC_WH_D,KC_WH_U,KC_WH_R,_______,_______, _______, _______,_______,_______, \ + MO(MOUSE2),_______, C(Y), C(X), C(C), C(V),_______,KC_BTN2,KC_BTN3,C(PGUP),C(PGDN),_______, KC_RSFT, _______, _______,_______,_______,_______, \ + KC_LCTL,_______,KC_LALT, KC_BTN1, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, _______,_______,_______, _______,_______), + /* Layer 5: Mouse layer 2*/ + [MOUSE2] = LAYOUT(\ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,KC_BTN2,KC_WH_U,KC_BTN3,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,KC_WH_L,KC_WH_D,KC_WH_R,_______,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,_______,_______, _______, _______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______), + /* Layer 6: Misc layer */ + [MISC] = LAYOUT(\ + _______, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, _______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,KC_SLCT, C(W), KC_UP,_______,_______,_______,_______,KC_BSPC, KC_DEL,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \ + _______,_______,KC_LEFT,KC_DOWN,KC_RGHT,_______,KC_HOME,KC_PGDN,KC_PGUP,_______,_______,_______, _______, _______,_______,_______, \ + KC_LSFT,_______, C(Y), C(X), C(C), C(V), KC_SPC, KC_END,_______,C(PGUP),C(PGDN),_______, _______, _______, _______,_______,_______,_______, \ + _______,_______,_______, LT(MISC, KC_SPC), _______,_______,_______,_______, _______,_______,_______, _______,_______), +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_TOGGLE(MOUSE1), // tap-toggle mouse layer (4) + [1] = ACTION_FUNCTION_TAP(LCTRL_BRACKET), // tap to print [ + [2] = ACTION_FUNCTION_TAP(RCTRL_BRACKET), // tap to print ] + [3] = ACTION_FUNCTION_TAP(LALT_CURLY), // tap to print { + [4] = ACTION_FUNCTION_TAP(RALT_CURLY), // tap to print } + [5] = ACTION_LAYER_TAP_TOGGLE(PROG1), // tap-toggle programming layer 1 + [6] = ACTION_LAYER_SET_CLEAR(DEFAULT), + [7] = ACTION_FUNCTION_TAP(CTRL_CLICK), + [8] = ACTION_FUNCTION_TAP(LSHFT_PAREN), // tap to print ( + [9] = ACTION_FUNCTION_TAP(RSHFT_PAREN), // tap to print ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case GRV: // macro to print accent grave + return (record->event.pressed ? + MACRO( D(LSFT), T(EQL), U(RALT), T(SPC), END) : + MACRO_NONE ); + case CFLEX: // print accent circonflex + return (record->event.pressed ? + MACRO( T(GRV), T(SPC), END ) : + MACRO_NONE ); + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + uint8_t layer; + layer = biton32(layer_state); + + if (current_layer_global != layer) { + current_layer_global = layer; + + // unset CAPSLOCK and SCROLL LOCK LEDs + led_set_kb(host_keyboard_leds() & ~(1<<USB_LED_CAPS_LOCK)); + led_set_kb(host_keyboard_leds() & ~(1<<USB_LED_SCROLL_LOCK)); + // set SCROLL LOCK LED when the mouse layer is active, CAPS LOCK when PROG layer is active + if (layer == MOUSE1 || layer == MOUSE2) { + led_set_kb(host_keyboard_leds() | (1<<USB_LED_SCROLL_LOCK)); + } else if (layer == PROG1 || layer == PROG2) { + led_set_kb(host_keyboard_leds() | (1<<USB_LED_CAPS_LOCK)); + } + } +} + +void led_set_user(uint8_t usb_led) { + +} + +void tap_helper(keyrecord_t *record, uint16_t orig_mod, uint16_t macro_mod, uint16_t macro_kc ) { + if (record->event.pressed) { + if (record->tap.count > 0 && !record->tap.interrupted) { + if (record->tap.interrupted) { + register_mods(MOD_BIT(orig_mod)); + } + } else { + register_mods(MOD_BIT(orig_mod)); + } + } else { + if (record->tap.count > 0 && !(record->tap.interrupted)) { + add_weak_mods(MOD_BIT(macro_mod)); + send_keyboard_report(); + register_code(macro_kc); + unregister_code(macro_kc); + del_weak_mods(MOD_BIT(macro_mod)); + send_keyboard_report(); + record->tap.count = 0; // ad hoc: cancel tap + } else { + unregister_mods(MOD_BIT(orig_mod)); + } + } +} + +/* if LCTRL is tabbed, print (, or ) if RCTRL is tabbed, same for LALT/RALT and [/] */ +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + // The code is copied from keymap_hasu.c in the tmk keyboards hhkb folder + switch (id) { + case LCTRL_BRACKET: + tap_helper(record, KC_LCTL, KC_RALT, KC_8); + break; + case RCTRL_BRACKET: + tap_helper(record, KC_RCTL, KC_RALT, KC_9); + break; + case LALT_CURLY: + tap_helper(record, KC_LALT, KC_RALT, KC_7); + break; + case RALT_CURLY: + tap_helper(record, KC_RALT, KC_RALT, KC_0); + break; + case LSHFT_PAREN: + tap_helper(record, KC_LSFT, KC_LSFT, KC_8); + break; + case RSHFT_PAREN: + tap_helper(record, KC_RSFT, KC_LSFT, KC_9); + break; + case CTRL_CLICK: + if (record->event.pressed) { + mousekey_clear(); + register_mods(MOD_BIT(KC_LCTL)); + send_keyboard_report(); + wait_ms(5); + mousekey_on(KC_BTN1); + mousekey_send(); + wait_ms(10); + mousekey_off(KC_BTN1); + mousekey_send(); + wait_ms(5); + unregister_mods(MOD_BIT(KC_LCTL)); + send_keyboard_report(); + } + break; + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + uint8_t layer; + layer = biton32(layer_state); + if (layer == PROG2) { + if (keycode >= KC_A && keycode <= KC_EXSEL && \ + !( // do not send LSFT + these keycodes, they are needed for emulating the US layout + keycode == KC_NONUS_BSLASH || + keycode == KC_RBRC || + keycode == KC_BSLS || + keycode == KC_GRV + )) { + // LSFT is the modifier for this layer, so we set LSFT for every key to get the expected behavior + if (record->event.pressed) { + register_mods(MOD_LSFT); + } else { + unregister_mods(MOD_LSFT); + } + } + } + return true; +} diff --git a/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/readme.md b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/readme.md new file mode 100644 index 000000000..0d23be4ea --- /dev/null +++ b/keyboards/bpiphany/kitten_paw/keymaps/ickerwx/readme.md @@ -0,0 +1,18 @@ +# My personal keymap for the Kitten Paw controller + +This keymap only works correctly when you have your OS configured with a German keymap. Use the keymap however you like. It's most likely a living thing that will never be quite finished. + +## Description of the layers +Layer 0 (DEFAULT) works just like you would expect a keyboard to work, mostly, except: +Caps Lock switches to the mouse layer, RGUI and APP are switches to the programming layer and media layer. +Mouse and programming layer switches can be held or double-tapped to lock. +Holding space switches to the MISC layer where I currently accumulate useful shortcuts. +Tapping left and right Shift, Ctrl and Alt will send (), [] and {} respectively. + +Layers 1 and 2 (PROG1 and PROG2) emulate the US layout while still using a German OS keymap setting. I was annoyed of having to change the OS settings every time I wanted to use the US layout for coding, so I made these layers to behave just like the US layout even though the OS still uses German. The shift keys were a bit tricky, I had to use them as MO(PROG2) switches, so to get the actual expected behavior I enable LSFT for almost every keypress on PROG2 in ```process_record_user```. Since the shift keys are MO() function keys, they do not print () at the moment, which sucks. I'm working on it. + +Layer 3 (MEDIA) just has a couple of media keys on it, mainly around the cursor keys and nav key cluster. + +Layers 4 and 5 (MOUSE1 and MOUSE2) are mouse layers. Move the cursor using ESDF, scroll using HJKL, Space for left click, N and M for right and middle click. There's more, look at the keymap. + +Layer 6 is a layer I don't have a good name for, so I call it MISC. You'll find cursor keys at ESDF, other navigation keys around the HJKL cluster and F12 to F24 on the F-keys. For now.
\ No newline at end of file diff --git a/keyboards/bpiphany/kitten_paw/kitten_paw.c b/keyboards/bpiphany/kitten_paw/kitten_paw.c new file mode 100644 index 000000000..26cb533f2 --- /dev/null +++ b/keyboards/bpiphany/kitten_paw/kitten_paw.c @@ -0,0 +1,51 @@ +#include "kitten_paw.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + CONFIG_LED_IO; + CONFIG_LED_IO; + print_dec(usb_led); + if (usb_led & (1<<USB_LED_CAPS_LOCK)) + USB_LED_CAPS_LOCK_ON; + else + USB_LED_CAPS_LOCK_OFF; + + if (usb_led & (1<<USB_LED_NUM_LOCK)) + USB_LED_NUM_LOCK_ON; + else + USB_LED_NUM_LOCK_OFF; + if (usb_led & (1<<USB_LED_SCROLL_LOCK)) + USB_LED_SCROLL_LOCK_ON; + else + USB_LED_SCROLL_LOCK_OFF; + led_set_user(usb_led); +} diff --git a/keyboards/bpiphany/kitten_paw/kitten_paw.h b/keyboards/bpiphany/kitten_paw/kitten_paw.h new file mode 100644 index 000000000..4de550f81 --- /dev/null +++ b/keyboards/bpiphany/kitten_paw/kitten_paw.h @@ -0,0 +1,77 @@ +#ifndef KITTEN_PAW_H +#define KITTEN_PAW_H + +#include "quantum.h" + +#define CONFIG_LED_IO \ + DDRB |= (1<<7); \ + DDRC |= (1<<5) | (1<<6); + +#define USB_LED_CAPS_LOCK_ON PORTC &= ~(1<<6) +#define USB_LED_CAPS_LOCK_OFF PORTC |= (1<<6) +#define USB_LED_NUM_LOCK_ON PORTB &= ~(1<<7) +#define USB_LED_NUM_LOCK_OFF PORTB |= (1<<7) +#define USB_LED_SCROLL_LOCK_ON PORTC &= ~(1<<5) +#define USB_LED_SCROLL_LOCK_OFF PORTC |= (1<<5) + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +/* + Matrix col/row mapping + + ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. + | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 | + `----' `-------------------' `-------------------' `-------------------' `--------------' + ,-------------------------------------------------------------------------. ,--------------. ,-------------------. + | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 | + |-------------------------------------------------------------------------| |--------------| |-------------------| + | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 | + |-------------------------------------------------------------------------| '--------------' |-------------- | + | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | | K2 | L2 | Q2 | | + |-------------------------------------------------------------------------| ,----. |-------------------| + | N2 | I6 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | | K3 | L3 | Q3 | O3 | + |-------------------------------------------------------------------------| ,--------------. |-------------- | + | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6 | Q6 | | + `-------------------------------------------------------------------------' `--------------' `-------------------' +*/ + +#define LAYOUT( \ + KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \ + KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \ + KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \ + KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \ + KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \ + KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \ +) \ +{ \ + {KC_NO, KB0, KC0, KD0,KC_NO, KF0, KG0,KC_NO,KC_NO,KC_NO, KK0, KL0,KC_NO,KC_NO, KO0,KC_NO, KQ0, KR0}, \ + { KA1, KB1,KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1,KC_NO,KC_NO,KC_NO,KC_NO, KQ1,KC_NO}, \ + {KC_NO, KB2,KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2,KC_NO, KN2,KC_NO, KP2, KQ2, KR2}, \ + {KC_NO, KB3,KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3,KC_NO, KQ3, KR3}, \ + { KA4, KB4,KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4,KC_NO,KC_NO, KO4,KC_NO, KQ4, KR4}, \ + { KA5,KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5,KC_NO,KC_NO, KO5,KC_NO, KQ5, KR5}, \ + {KC_NO, KB6, KC6,KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KL6,KC_NO,KC_NO, KO6,KC_NO, KQ6, KR6}, \ + { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7,KC_NO,KC_NO,KC_NO,KC_NO, KO7,KC_NO, KQ7, KR7} \ +} + +#define LAYOUT_fullsize_ansi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{ \ + {KC_NO, KB0, KC0, KD0,KC_NO, KF0, KG0,KC_NO,KC_NO,KC_NO, KK0, KL0,KC_NO,KC_NO, KO0,KC_NO, KQ0, KR0}, \ + { KA1, KB1,KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1,KC_NO,KC_NO,KC_NO,KC_NO, KQ1,KC_NO}, \ + {KC_NO, KB2,KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2,KC_NO, KN2,KC_NO, KP2, KQ2, KR2}, \ + {KC_NO, KB3,KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3,KC_NO, KQ3, KR3}, \ + { KA4, KB4,KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4,KC_NO,KC_NO, KO4,KC_NO, KQ4, KR4}, \ + { KA5,KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5,KC_NO,KC_NO, KO5,KC_NO, KQ5, KR5}, \ + {KC_NO, KB6, KC6,KC_NO, KE6, KF6, KG6, KH6, KC_NO,KJ6, KK6, KL6,KC_NO,KC_NO, KO6,KC_NO, KQ6, KR6}, \ + { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7,KC_NO,KC_NO,KC_NO,KC_NO, KO7,KC_NO, KQ7, KR7} \ +} + +#endif diff --git a/keyboards/bpiphany/kitten_paw/matrix.c b/keyboards/bpiphany/kitten_paw/matrix.c new file mode 100644 index 000000000..6fdbfffd6 --- /dev/null +++ b/keyboards/bpiphany/kitten_paw/matrix.c @@ -0,0 +1,183 @@ +/* + Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + +#ifndef DEBOUNCING_DELAY +# define DEBOUNCING_DELAY 5 +#endif +static uint8_t debouncing = DEBOUNCING_DELAY; + +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static uint8_t read_rows(void); +static void select_col(uint8_t col); + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline uint8_t matrix_rows(void) { + return MATRIX_ROWS; +} + +inline uint8_t matrix_cols(void) { + return MATRIX_COLS; +} + +/* Column pin configuration + * + * col: 0 1 2 3 4 5 6 7 + * pin: PC7 PD5 PD3 PD1 PC2 PD6 PD4 PD2 + * + * Rrr pin configuration + * + * These rrrs uses one 74HC154 4 to 16 bit demultiplexer (low + * active), together with 2 rrrs driven directly from the micro + * controller, to control the 18 rrrs. The rrrs are driven from + * pins B6,5,4,3,2,1,0. + */ +void matrix_init(void) { + DDRC &= ~0b10000100; // Row input pins + DDRD &= ~0b01111110; + PORTC |= 0b10000100; + PORTD |= 0b01111110; + + DDRB |= 0b01111111; // Column output pins + + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + select_col(col); + _delay_us(3); + uint8_t rows = read_rows(); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col); + bool curr_bit = rows & (1<<row); + if (prev_bit != curr_bit) { + matrix_debouncing[row] ^= ((matrix_row_t)1<<col); + debouncing = DEBOUNCING_DELAY; + } + } + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } + else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + matrix_scan_quantum(); + return 1; +} + +bool matrix_is_modified(void) { + if (debouncing) + return false; + else + return true; +} + +inline bool matrix_is_on(uint8_t row, uint8_t col) { + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline matrix_row_t matrix_get_row(uint8_t row) { + return matrix[row]; +} + +void matrix_print(void) { + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row))); + } +} + +uint8_t matrix_key_count(void) { + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop32(matrix[i]); + } + return count; +} + +static uint8_t read_rows(void) { + return + (PINC&(1<<7) ? 0 : (1<<0)) | + (PIND&(1<<5) ? 0 : (1<<1)) | + (PIND&(1<<3) ? 0 : (1<<2)) | + (PIND&(1<<1) ? 0 : (1<<3)) | + (PINC&(1<<2) ? 0 : (1<<4)) | + (PIND&(1<<2) ? 0 : (1<<5)) | + (PIND&(1<<4) ? 0 : (1<<6)) | + (PIND&(1<<6) ? 0 : (1<<7)); +} + +static void select_col(uint8_t col) { + switch (col) { + case 0: PORTB = (PORTB & ~0b01111111) | 0b01100100; break; + case 1: PORTB = (PORTB & ~0b01111111) | 0b01101100; break; + case 2: PORTB = (PORTB & ~0b01111111) | 0b01100010; break; + case 3: PORTB = (PORTB & ~0b01111111) | 0b01111010; break; + case 4: PORTB = (PORTB & ~0b01111111) | 0b01100110; break; + case 5: PORTB = (PORTB & ~0b01111111) | 0b01110110; break; + case 6: PORTB = (PORTB & ~0b01111111) | 0b01101110; break; + case 7: PORTB = (PORTB & ~0b01111111) | 0b01111110; break; + case 8: PORTB = (PORTB & ~0b01111111) | 0b01000001; break; + case 9: PORTB = (PORTB & ~0b01111111) | 0b00100001; break; + case 10: PORTB = (PORTB & ~0b01111111) | 0b01101010; break; + case 11: PORTB = (PORTB & ~0b01111111) | 0b01110010; break; + case 12: PORTB = (PORTB & ~0b01111111) | 0b01111100; break; + case 13: PORTB = (PORTB & ~0b01111111) | 0b01110100; break; + case 14: PORTB = (PORTB & ~0b01111111) | 0b01111000; break; + case 15: PORTB = (PORTB & ~0b01111111) | 0b01110000; break; + case 16: PORTB = (PORTB & ~0b01111111) | 0b01100000; break; + case 17: PORTB = (PORTB & ~0b01111111) | 0b01101000; break; + } +} diff --git a/keyboards/bpiphany/kitten_paw/readme.md b/keyboards/bpiphany/kitten_paw/readme.md new file mode 100644 index 000000000..15737a3a9 --- /dev/null +++ b/keyboards/bpiphany/kitten_paw/readme.md @@ -0,0 +1,16 @@ +kitten_paw +========== + +This is the firmware for the 2016 revision of the Kitten Paw controller by Bathroom Epiphanies. Most of the boilerplate code is the work of [BathroomEpiphanies](https://github.com/BathroomEpiphanies). + +NKRO doesn't work at the moment, I don't know if I will take the time to find out how to fix this, so far 6KRO is enough for me. + +Keyboard Maintainer: QMK Community +Hardware Supported: Kitten Paw PCB +Hardware Availability: https://geekhack.org/index.php?topic=46700.0 + +Make example for this keyboard (after setting up your build environment): + + make bpiphany/kitten_paw:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bpiphany/kitten_paw/rules.mk b/keyboards/bpiphany/kitten_paw/rules.mk new file mode 100644 index 000000000..fab9c422f --- /dev/null +++ b/keyboards/bpiphany/kitten_paw/rules.mk @@ -0,0 +1,74 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 + OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI controls +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 + +CUSTOM_MATRIX = yes +SRC += matrix.c + +LAYOUTS = fullsize_ansi diff --git a/keyboards/bpiphany/pegasushoof/README.md b/keyboards/bpiphany/pegasushoof/README.md new file mode 100644 index 000000000..1b3d63190 --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/README.md @@ -0,0 +1,12 @@ +Pegasus Hoof Controller +=== + +Keyboard Maintainer: QMK Community +Hardware Supported: Pegasus Hoof +Hardware Availability: https://1upkeyboards.com/filco-pegasus-hoof-controller.html + +Make example for this keyboard (after setting up your build environment): + + make bpiphany/pegasus_hoof:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bpiphany/pegasushoof/config.h b/keyboards/bpiphany/pegasushoof/config.h new file mode 100644 index 000000000..0dbec26e4 --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/config.h @@ -0,0 +1,46 @@ +/* +Copyright 2016 Daniel Svensson <dsvensson@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6050 +#define DEVICE_VER 0x0104 +#define MANUFACTURER Filco +#define PRODUCT Majestouch TKL \\w The Pegasus Hoof +#define DESCRIPTION QMK firmware for Majestouch TKL + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 18 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#endif diff --git a/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c b/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c new file mode 100644 index 000000000..6faf4db6f --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/keymaps/blowrak/keymap.c @@ -0,0 +1,112 @@ +/* +Copyright 2016 Daniel Svensson <dsvensson@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "pegasushoof.h" + +#define _______ KC_TRNS + +/* Swedish keys */ +#define SE_HALF KC_GRV +#define SE_PLUS KC_MINS +#define SE_ACUT KC_EQL +#define SE_AO KC_LBRC +#define SE_CIRC KC_RBRC +#define SE_QUOT KC_BSLS +#define SE_OE KC_SCLN +#define SE_AE KC_QUOT +#define SE_MINS KC_SLSH +#define SE_LTGT KC_NUBS +#define SE_LCBR RALT(KC_7) +#define SE_LBRC RALT(KC_8) +#define SE_RBRC RALT(KC_9) +#define SE_RCBR RALT(KC_0) +#define SE_PIPE RALT(SE_LTGT) +#define SE_BSLS RALT(SE_PLUS) + +#define KM_BLOWRAK 0 +#define KM_QWERTY 1 +#define KM_MEDIA 2 +#define KM_HAXHAX 3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Blowrak ISO layer, a Swedish take on Dvorak */ + [KM_BLOWRAK] = KEYMAP( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + SE_HALF, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, SE_PLUS,SE_ACUT,KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \ + KC_TAB, SE_AO, SE_AE, SE_OE, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_COMM,SE_CIRC,SE_QUOT, KC_DEL, KC_END, KC_PGDN, \ + KC_LCTRL,KC_A, KC_O, KC_E, KC_U, KC_I, KC_H, KC_D, KC_T, KC_N, KC_S, SE_MINS, KC_ENT, \ + KC_LSFT, SE_LTGT,KC_DOT, KC_Q, KC_J, KC_K, KC_B, KC_X, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \ + KC_FN0, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN1, KC_LEFT,KC_DOWN,KC_RGHT), + /* Layer 1: Standard ISO layer */ + [KM_QWERTY] = KEYMAP( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + SE_HALF, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, SE_PLUS,SE_ACUT,KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, SE_AO, SE_CIRC,SE_QUOT, KC_DEL, KC_END, KC_PGDN, \ + KC_LCTRL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, SE_OE, SE_AE, KC_ENT, \ + KC_LSFT, SE_LTGT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, SE_MINS, KC_RSFT, KC_UP, \ + KC_FN0, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN1, KC_LEFT,KC_DOWN,KC_RGHT), + /* Layer 2: Media layer */ + [KM_MEDIA] = KEYMAP( \ + _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_WAKE,KC_PWR, KC_SLEP, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,KC_VOLU, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_MUTE,_______,KC_VOLD, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, KC_MPLY, \ + _______,_______,_______, _______, _______,_______,RESET ,_______, KC_MPRV,KC_MSTP,KC_MNXT), + /* Layer 3: Programming layer */ + [KM_HAXHAX] = KEYMAP( \ + _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + _______,SE_LCBR,SE_PIPE,SE_RCBR,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + _______,SE_LBRC,SE_BSLS,SE_RBRC,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, \ + _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______), +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(KM_MEDIA), + [1] = ACTION_LAYER_TOGGLE(KM_QWERTY) +}; + +void matrix_scan_user(void) +{ + uint8_t layer = biton32(layer_state); + switch (layer) { + case KM_BLOWRAK: + ph_caps_led_on(); + ph_sclk_led_off(); + break; + case KM_QWERTY: + ph_sclk_led_on(); + ph_caps_led_off(); + break; + } +} + +/* Mixes in KM_HAXHAX via RALT modifier without shadowing the RALT key combinations. */ +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + uint8_t modifiers = get_mods(); + if (modifiers & MOD_BIT(KC_RALT) && record->event.pressed) { + uint16_t kc = keymap_key_to_keycode(KM_HAXHAX, record->event.key); + if (kc != KC_TRNS) { + register_code(kc); + unregister_code(kc); + return false; + } + } + return true; +} diff --git a/keyboards/bpiphany/pegasushoof/keymaps/blowrak/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/blowrak/rules.mk new file mode 100644 index 000000000..168fb625b --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/keymaps/blowrak/rules.mk @@ -0,0 +1,22 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42 +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/bpiphany/pegasushoof/keymaps/citadel/config.h b/keyboards/bpiphany/pegasushoof/keymaps/citadel/config.h new file mode 100644 index 000000000..2d27ff392 --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/keymaps/citadel/config.h @@ -0,0 +1,11 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* overridden settings: */ + +#undef PRODUCT +#define PRODUCT Pegasus Hoof Citadel + +#endif diff --git a/keyboards/bpiphany/pegasushoof/keymaps/citadel/keymap.c b/keyboards/bpiphany/pegasushoof/keymaps/citadel/keymap.c new file mode 100644 index 000000000..382854de9 --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/keymaps/citadel/keymap.c @@ -0,0 +1,128 @@ +/* Copyright 2018 Daniel Rose <droseger@protonmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "pegasushoof.h" + +/* Allow shortcuts for combos like RALT(KC_RBRC) that don't take up more than 7 characters: */ +#define G(kc) RALT(KC_##kc) +#define A(kc) LALT(KC_##kc) +#define C(kc) LCTL(KC_##kc) +#undef S /* Original shortcut (quantum_keycodes.h) takes full-sized keycodes: too long! */ +#define S(kc) LSFT(KC_##kc) +#define CTALDEL LCTL(LALT(KC_DEL)) + +enum layers { + DEF, + FUN, + RES, +}; + +enum tap_dance { + AF4, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Layer 0: default layer (ISO-DE) + * .----. .-------------------. .-------------------. .-------------------. .--------------. + * |Esc | |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10 |F11 |F12 | |PrSc|SLck|2Tp:| + * | | | | | | | | | | | | | | | | | |SyRq| |A+F4| + * '----' '-------------------' '-------------------' '-------------------' '--------------' + * .------------------------------------------------------------------------. .--------------. + * |° |! |" |§ |$ |% |& |/ |( |) |= |? |` |Backspa| |Ins |Home|PgUp| + * |^ |1 |2 ²|3 ³|4 |5 |6 |7 {|8 [|9 ]|0 }|ß \|´ | | | | | | + * |------------------------------------------------------------------------| |--------------| + * |Tab |Q |W |E |R |T |Z |U |I |O |P |Ü |* | E | |Del |End |PgDn| + * | | | | €| | | | | | | | |+ ~| n | | | | | + * |------------------------------------------------------------------\ t | '--------------' + * |Fn: |A |S |D |F |G |H |J |K |L |Ö |Ä |' | e | + * |Layer 2| | | | | | | | | | | |# | r | + * |------------------------------------------------------------------------| .----. + * |Shift|> |Y |X |C |V |B |N |M |; |: |_ |Shift | |Up | + * | |< ¦| | | | | | | µ|, |. |- | | | | + * |------------------------------------------------------------------------| .--------------. + * |Ctrl |Super|Alt | |AltGr|Alt |Fn: |Ctrl | |Left|Down|Righ| + * | | | | | | |Lay 2| | | | | | + * '------------------------------------------------------------------------' '--------------' + * NUHS = true position of KC_NUHS + */ +[DEF] = KEYMAP( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,TD(AF4), \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_NUHS, KC_DEL, KC_END, KC_PGDN, \ + MO(FUN),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,/*NUHS*/KC_ENT, \ + KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_LALT,MO(FUN),KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT), + + /* Layer 1: function layer + * .----. .-------------------. .-------------------. .-------------------. .--------------. + * |Ctl+| |My |WWW:|Calc|Medi| |Mus:|Mus:|Mus:|Mus:| |Vol:|Vol:|Vol:|See:| | | |Paus| + * |A+De| |Comp|Home| |Play| |Prev|Next|Paus|Stop| |Mute|Down|Up |[3] | | | |Brea| + * '----' '-------------------' '-------------------' '-------------------' '--------------' + * .------------------------------------------------------------------------. .--------------. + * | | | | | | | | | | | | | | | | | |Mou:| + * | | | | | | | |{ |[ |] |} |\ | | | | | |WhUp| + * |------------------------------------------------------------------------| |--------------| + * | | | | | | | | | | | | |~ | | | | |Mou:| + * | | | | | | | | | | | | | | | | | |WhDn| + * |------------------------------------------------------------------\ | '--------------' + * |CapsLck|Mou:|Mou:| | | | | | | | | | | | + * | |Fast|Slow| | | | | | | | | | | | + * |------------------------------------------------------------------------| .----. + * | | | | | | | | |µ | | | | | |Mou:| + * | | | | | | | | | | | | | | |Up | + * |------------------------------------------------------------------------| .--------------. + * |Mous:|Mous:| | | |Super|App | | |Mou:|Mou:|Mou:| + * |Bttn2|Bttn1| | | | | | | |Left|Down|Righ| + * '------------------------------------------------------------------------' '--------------' + * + */ +[FUN] = KEYMAP( \ + CTALDEL, KC_MYCM,KC_WHOM,KC_CALC,KC_MSEL,KC_MPRV,KC_MNXT,KC_MPLY,KC_MSTP,KC_MUTE,KC_VOLD,KC_VOLU,MO(RES), _______,KC_SLCK,KC_PAUS, \ + _______,_______,_______,_______,_______,_______,_______,G(7), G(8), G(9), G(0), G(MINS),_______,_______, _______,_______,KC_WH_U, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,G(RBRC),_______, _______,_______,KC_WH_D, \ + KC_CAPS,KC_ACL2,KC_ACL0,_______,_______,_______,_______,_______,_______,_______,_______,_______,/*NUHS*/_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,G(M), _______,_______,_______, _______, KC_MS_U, \ + KC_BTN2,KC_BTN1,_______, _______, _______,KC_RGUI,KC_APP ,_______, KC_MS_L,KC_MS_D,KC_MS_R), + + +/* Layer 3: Reset layer (prevents accidental resets) */ +[RES] = KEYMAP( \ + _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,/*NUHS*/_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, \ + _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______), +}; + +qk_tap_dance_action_t tap_dance_actions[] = { + /* Tap once: nothing. Tap twice: Alt+F4 */ + [AF4] = ACTION_TAP_DANCE_DOUBLE(XXXXXXX,A(F4)), +}; + +void led_set_user(uint8_t usb_led) { + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + ph_caps_led_on(); + } else { + ph_caps_led_off(); + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + ph_sclk_led_on(); + } else { + ph_sclk_led_off(); + } +} diff --git a/keyboards/bpiphany/pegasushoof/keymaps/citadel/readme.md b/keyboards/bpiphany/pegasushoof/keymaps/citadel/readme.md new file mode 100644 index 000000000..3618bae86 --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/keymaps/citadel/readme.md @@ -0,0 +1,75 @@ +# Citadel keymap for pegasushoof + +Designed for ISO-DE and similar ISO layouts. + +The central idea of this keymap is to avoid unergonomic key combos that force the user to either press +multiple keys with one hand or to use the left hand for right-sided keys. For instance, ISO-DE users +have to press `AltGr`+`7` to type _{_. The keymap allows ergonomic access to the right-sided keys of the +German AltGr-layer by turning `Caps Lock` into a hybrid Fn/AltGr-key. It can easily be adapted for other +ISO layouts. + +The _Function_ layer also offers mouse emulation and function/media keys in the F-Row. + +`Pause/Break` is used as a safe _close key_: A _single tap_ does nothing, a _double tap_ executes ALT+F4. + +Named after the homonymous space station from _Mass Effect_. Made by [Daniel Rose](https://github.com/droseger/). + +## [1] Layers + +### Layer 1 (Default) + .----. .-------------------. .-------------------. .-------------------. .--------------. + |Esc | |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10 |F11 |F12 | |PrSc|SLck|2Tp:| + | | | | | | | | | | | | | | | | | |SyRq| |A+F4| + '----' '-------------------' '-------------------' '-------------------' '--------------' + .------------------------------------------------------------------------. .--------------. + |° |! |" |§ |$ |% |& |/ |( |) |= |? |` |Backspa| |Ins |Home|PgUp| + |^ |1 |2 ²|3 ³|4 |5 |6 |7 {|8 [|9 ]|0 }|ß \|´ | | | | | | + |------------------------------------------------------------------------| |--------------| + |Tab |Q |W |E |R |T |Z |U |I |O |P |Ü |* | E | |Del |End |PgDn| + | | | | €| | | | | | | | |+ ~| n | | | | | + |------------------------------------------------------------------\ t | '--------------' + |Fn: |A |S |D |F |G |H |J |K |L |Ö |Ä |' | e | + |Layer 2| | | | | | | | | | | |# | r | + |------------------------------------------------------------------------| .----. + |Shift|> |Y |X |C |V |B |N |M |; |: |_ |Shift | |Up | + | |< ¦| | | | | | | µ|, |. |- | | | | + |------------------------------------------------------------------------| .--------------. + |Ctrl |Super|Alt | |AltGr|Alt |Fn: |Ctrl | |Left|Down|Righ| + | | | | | | |Lay 2| | | | | | + '------------------------------------------------------------------------' '--------------' + +### Layer 2 (Function) + .----. .-------------------. .-------------------. .-------------------. .--------------. + |Ctl+| |My |WWW:|Calc|Medi| |Mus:|Mus:|Mus:|Mus:| |Vol:|Vol:|Vol:|See:| | | |Paus| + |A+De| |Comp|Home| |Play| |Prev|Next|Paus|Stop| |Mute|Down|Up |[3] | | | |Brea| + '----' '-------------------' '-------------------' '-------------------' '--------------' + .------------------------------------------------------------------------. .--------------. + | | | | | | | | | | | | | | | | | |Mou:| + | | | | | | | |{ |[ |] |} |\ | | | | | |WhUp| + |------------------------------------------------------------------------| |--------------| + | | | | | | | | | | | | |~ | | | | |Mou:| + | | | | | | | | | | | | | | | | | |WhDn| + |------------------------------------------------------------------\ | '--------------' + |CapsLck|Mou:|Mou:| | | | | | | | | | | | + | |Fast|Slow| | | | | | | | | | | | + |------------------------------------------------------------------------| .----. + | | | | | | | | |µ | | | | | |Mou:| + | | | | | | | | | | | | | | |Up | + |------------------------------------------------------------------------| .--------------. + |Mous:|Mous:| | | |Super|App | | |Mou:|Mou:|Mou:| + |Bttn2|Bttn1| | | | | | | |Left|Down|Righ| + '------------------------------------------------------------------------' '--------------' + +Layer 3 exists solely to prevent users from accidentally activating boot mode: `R` is redefined +as `RESET` key [3]. + +## [2] How to build and install +1) Prerequisite: install the necessary [build tools](https://docs.qmk.fm/#/getting_started_build_tools) +such as [dfu-programmer](https://github.com/dfu-programmer/dfu-programmer). + - You might need to [add udev rules](https://docs.qmk.fm/#/faq_build?id=can39t-program-on-linux) under Linux. +2) To test if the keymap compiles, simply run `make pegasushoof:citadel` +3) Enter the `qmk_firmware` root directory and run `make pegasushoof:citadel:dfu` +4) Reset controller to _Boot mode_ by pressing the `RESET` key or by using a magnet. + +## [3] How to access Boot mode after install +Press `Fn+F12+R` diff --git a/keyboards/bpiphany/pegasushoof/keymaps/citadel/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/citadel/rules.mk new file mode 100644 index 000000000..0dd8a79f4 --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/keymaps/citadel/rules.mk @@ -0,0 +1,22 @@ +# Build Options +# change to "no" to disable the options +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42 +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +TAP_DANCE_ENABLE = yes # see https://docs.qmk.fm/#/feature_tap_dance (+1000) + + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default/keymap.c b/keyboards/bpiphany/pegasushoof/keymaps/default/keymap.c new file mode 100644 index 000000000..aa006b23a --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/keymaps/default/keymap.c @@ -0,0 +1,60 @@ +/* +Copyright 2016 Daniel Svensson <dsvensson@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "pegasushoof.h" + +#define _______ KC_TRNS + +#define KM_QWERTY 0 +#define KM_MEDIA 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Standard ISO layer */ + [KM_QWERTY] = KEYMAP( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CLCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN0, KC_LEFT,KC_DOWN,KC_RGHT), + /* Layer 1: Function layer */ + [KM_MEDIA] = KEYMAP( \ + _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_WAKE,KC_PWR, KC_SLEP, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,KC_VOLU, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,KC_VOLD, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, KC_MPLY, \ + _______,_______,_______, _______, _______,_______,RESET ,_______, KC_MPRV,KC_MSTP,KC_MNXT) +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(KM_MEDIA) +}; + +void led_set_user(uint8_t usb_led) { + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + ph_caps_led_on(); + } else { + ph_caps_led_off(); + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + ph_sclk_led_on(); + } else { + ph_sclk_led_off(); + } +} diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk new file mode 100644 index 000000000..168fb625b --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk @@ -0,0 +1,22 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42 +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/bpiphany/pegasushoof/matrix.c b/keyboards/bpiphany/pegasushoof/matrix.c new file mode 100644 index 000000000..127433875 --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/matrix.c @@ -0,0 +1,222 @@ +/* +Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> +Copyright 2016 Daniel Svensson <dsvensson@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "wait.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + +static uint8_t debouncing = DEBOUNCING_DELAY; +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void select_row(uint8_t col); + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + /* Column output pins */ + DDRD |= 0b01111011; + /* Row input pins */ + DDRC &= ~0b10000000; + DDRB &= ~0b01111111; + PORTC |= 0b10000000; + PORTB |= 0b01111111; + + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) +{ + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + select_row(col); + wait_us(30); + matrix_row_t rows = read_cols(); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col); + bool curr_bit = rows & (1<<row); + if (prev_bit != curr_bit) { + matrix_debouncing[row] ^= (matrix_row_t) 1 << col; + debouncing = DEBOUNCING_DELAY; + } + } + } + + if (debouncing) { + if (--debouncing) { + wait_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + matrix_scan_quantum(); + + return 1; +} + +bool matrix_is_modified(void) +{ + if (debouncing) + return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return matrix[row] & 1 << col; +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +static matrix_row_t read_cols(void) +{ + return + (PINB & (1 << 5) ? 0 : 1 << 0) | + (PINC & (1 << 7) ? 0 : 1 << 1) | + (PINB & (1 << 4) ? 0 : 1 << 2) | + (PINB & (1 << 6) ? 0 : 1 << 3) | + (PINB & (1 << 1) ? 0 : 1 << 4) | + (PINB & (1 << 0) ? 0 : 1 << 5) | + (PINB & (1 << 3) ? 0 : 1 << 6) | + (PINB & (1 << 2) ? 0 : 1 << 7); +} + +static void select_row(uint8_t col) +{ + switch (col) { + case 0: + PORTD = (PORTD & ~0b01111011) | 0b00110011; + break; + case 1: + PORTD = (PORTD & ~0b01111011) | 0b01110000; + break; + case 2: + PORTD = (PORTD & ~0b01111011) | 0b00010011; + break; + case 3: + PORTD = (PORTD & ~0b01111011) | 0b01101000; + break; + case 4: + PORTD = (PORTD & ~0b01111011) | 0b00001011; + break; + case 5: + PORTD = (PORTD & ~0b01111011) | 0b00111011; + break; + case 6: + PORTD = (PORTD & ~0b01111011) | 0b01111000; + break; + case 7: + PORTD = (PORTD & ~0b01111011) | 0b01100001; + break; + case 8: + PORTD = (PORTD & ~0b01111011) | 0b01101001; + break; + case 9: + PORTD = (PORTD & ~0b01111011) | 0b01110001; + break; + case 10: + PORTD = (PORTD & ~0b01111011) | 0b01101010; + break; + case 11: + PORTD = (PORTD & ~0b01111011) | 0b01100010; + break; + case 12: + PORTD = (PORTD & ~0b01111011) | 0b01111001; + break; + case 13: + PORTD = (PORTD & ~0b01111011) | 0b01100000; + break; + case 14: + PORTD = (PORTD & ~0b01111011) | 0b01000011; + break; + case 15: + PORTD = (PORTD & ~0b01111011) | 0b00011011; + break; + case 16: + PORTD = (PORTD & ~0b01111011) | 0b00100011; + break; + case 17: + PORTD = (PORTD & ~0b01111011) | 0b00101011; + break; + } +} diff --git a/keyboards/bpiphany/pegasushoof/pegasushoof.c b/keyboards/bpiphany/pegasushoof/pegasushoof.c new file mode 100644 index 000000000..cde814812 --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/pegasushoof.c @@ -0,0 +1,59 @@ +/* +Copyright 2016 Daniel Svensson <dsvensson@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "pegasushoof.h" + + +extern inline void ph_caps_led_on(void); +extern inline void ph_caps_led_off(void); + +extern inline void ph_sclk_led_on(void); +extern inline void ph_sclk_led_off(void); + + +__attribute__ ((weak)) +void matrix_init_user(void) { +}; + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +__attribute__ ((weak)) +bool process_action_user(keyrecord_t *record) { + return true; +} + +__attribute__ ((weak)) +void led_set_user(uint8_t usb_led) { +} + +void matrix_init_kb(void) { + matrix_init_user(); +} + +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +bool process_action_kb(keyrecord_t *record) { + return process_action_user(record); +} + +void led_set_kb(uint8_t usb_led) { + led_set_user(usb_led); +} diff --git a/keyboards/bpiphany/pegasushoof/pegasushoof.h b/keyboards/bpiphany/pegasushoof/pegasushoof.h new file mode 100644 index 000000000..d031e3ed2 --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/pegasushoof.h @@ -0,0 +1,51 @@ +/* +Copyright 2016 Daniel Svensson <dsvensson@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef PEGASUSHOOF_H +#define PEGASUSHOOF_H + +#include "matrix.h" +#include "quantum.h" + +#define ___ KC_NO + +#define KEYMAP( \ + KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \ + KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \ + KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \ + KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \ + KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \ + KP4, KD2, KN6, KQ6, KN0, KA3, KM0, KP1, KC0, KQ0, KR0 \ + ) { /* 00-A 01-B 02-C 03-D 04-E 05-F 06-G 07-H 08-I 09-J 10-K 11-L 12-M 13-N 14-O 15-P 16-Q 17-R */ \ + /* 0 */ { ___ , ___ , KC0 , ___ , ___ , KF0 , ___ , ___ , ___ , KJ0 , KK0 , ___ , KM0 , KN0 , KO0 , ___ , KQ0 , KR0 }, \ + /* 1 */ { ___ , ___ , ___ , ___ , ___ , ___ , KG1 , KH1 , KI1 , KJ1 , KK1 , KL1 , KM1 , ___ , KO1 , KP1 , ___ , ___ }, \ + /* 2 */ { ___ , KB2 , ___ , KD2 , ___ , KF2 , KG2 , KH2 , KI2 , KJ2 , KK2 , KL2 , KM2 , ___ , KO2 , ___ , ___ , ___ }, \ + /* 3 */ { KA3 , KB3 , ___ , ___ , ___ , KF3 , KG3 , KH3 , KI3 , KJ3 , KK3 , KL3 , KM3 , ___ , KO3 , ___ , ___ , ___ }, \ + /* 4 */ { ___ , ___ , KC4 , ___ , KE4 , KF4 , KG4 , KH4 , KI4 , KJ4 , KK4 , KL4 , KM4 , ___ , KO4 , KP4 , KQ4 , KR4 }, \ + /* 5 */ { ___ , ___ , KC5 , ___ , KE5 , KF5 , KG5 , KH5 , KI5 , KJ5 , KK5 , KL5 , KM5 , KN5 , KO5 , KP5 , ___ , ___ }, \ + /* 6 */ { ___ , ___ , KC6 , ___ , ___ , KF6 , KG6 , KH6 , KI6 , KJ6 , KK6 , KL6 , ___ , KN6 , KO6 , ___ , KQ6 , ___ }, \ + /* 7 */ { ___ , ___ , ___ , ___ , ___ , KF7 , KG7 , KH7 , KI7 , KJ7 , KK7 , KL7 , KM7 , KN7 , ___ , KP7 , ___ , ___ }, \ + } + +inline void ph_caps_led_on(void) { DDRC |= (1<<6); PORTC &= ~(1<<6); } +inline void ph_caps_led_off(void) { DDRC &= ~(1<<6); PORTC &= ~(1<<6); } + +inline void ph_sclk_led_on(void) { DDRC |= (1<<5); PORTC &= ~(1<<5); } +inline void ph_sclk_led_off(void) { DDRC &= ~(1<<5); PORTC &= ~(1<<5); } + + +#endif diff --git a/keyboards/bpiphany/pegasushoof/rules.mk b/keyboards/bpiphany/pegasushoof/rules.mk new file mode 100644 index 000000000..c5a35428c --- /dev/null +++ b/keyboards/bpiphany/pegasushoof/rules.mk @@ -0,0 +1,67 @@ +# MCU name +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + + +CUSTOM_MATRIX = yes +SRC = matrix.c diff --git a/keyboards/bpiphany/readme.md b/keyboards/bpiphany/readme.md new file mode 100644 index 000000000..992b7c908 --- /dev/null +++ b/keyboards/bpiphany/readme.md @@ -0,0 +1,6 @@ +# Bathroom Epiphanies + +bpiphany is the owner and designer of [Bathroom Epiphanies](http://bathroomepiphanies.com/). + +He is based in Sweden and creates several controller boards as a swappable component for some off the shelf keyboards. + diff --git a/keyboards/bpiphany/tiger_lily/config.h b/keyboards/bpiphany/tiger_lily/config.h new file mode 100644 index 000000000..490819290 --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/config.h @@ -0,0 +1,147 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Bathroom Epiphanies +#define PRODUCT tiger_lily +#define DESCRIPTION Tiger Lily controller for the Filco Majestouch 2 + +/* + * Frosty Flake Rev. 20140521 made by Bathroom Ephiphanies + * Ported from the Bathroom Epiphanies TMK Firmware: + * https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers + * + */ + +/* key matrix size */ +#define MATRIX_ROWS 8 // Row0 - Row7 in the schematic +#define MATRIX_COLS 18 // ColA - ColR in the schematic + +/* + * Keyboard Matrix Assignments + */ +#define UNUSED_PINS { B0, C4, D3 } + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/bpiphany/tiger_lily/info.json b/keyboards/bpiphany/tiger_lily/info.json new file mode 100644 index 000000000..1a2194b06 --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "tiger_lily", + "url": "", + "maintainer": "qmk", + "width": 22.5, + "height": 6.5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}] + }, + "LAYOUT_fullsize_ansi": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}] + } + } +} diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default/config.h b/keyboards/bpiphany/tiger_lily/keymaps/default/config.h new file mode 100644 index 000000000..8893d122e --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default/keymap.c b/keyboards/bpiphany/tiger_lily/keymaps/default/keymap.c new file mode 100644 index 000000000..46c17aca8 --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/keymaps/default/keymap.c @@ -0,0 +1,11 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ + KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT) +};
\ No newline at end of file diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default/readme.md b/keyboards/bpiphany/tiger_lily/keymaps/default/readme.md new file mode 100644 index 000000000..4626859df --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for tiger_lily diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk b/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk new file mode 100644 index 000000000..9d3df5964 --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/config.h b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/config.h new file mode 100644 index 000000000..8893d122e --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/keymap.c b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/keymap.c new file mode 100644 index 000000000..6457b0282 --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/keymap.c @@ -0,0 +1,11 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_fullsize_ansi(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT) +};
\ No newline at end of file diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/readme.md b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/readme.md new file mode 100644 index 000000000..2cb8c8993 --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/readme.md @@ -0,0 +1,3 @@ +# default_ansi + +A standard fullsize ANSI-layout keymap for Tiger Lily-powered keyboards. diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk new file mode 100644 index 000000000..9d3df5964 --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/bpiphany/tiger_lily/matrix.c b/keyboards/bpiphany/tiger_lily/matrix.c new file mode 100644 index 000000000..3b48f6b36 --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/matrix.c @@ -0,0 +1,155 @@ +/* + Copyright 2017 Gabriel Young <gabeplaysdrums@live.com> + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + +#ifndef DEBOUNCING_DELAY +# define DEBOUNCING_DELAY 5 +#endif +static uint8_t debouncing = DEBOUNCING_DELAY; + +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +static matrix_row_t scan_col(void) { + return ( + (PINC&(1<<2) ? 0 : ((matrix_row_t)1<<0)) | \ + (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<1)) | \ + (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<2)) | \ + (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<3)) | \ + (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<4)) | \ + (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<5)) | \ + (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<6)) | \ + (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<7)) + ); +} + +static void select_col(uint8_t col) { + switch (col) { + case 0: PORTD = (PORTD & ~0b01110111) | 0b01110110; break; \ + case 1: PORTD = (PORTD & ~0b01110111) | 0b01100001; break; \ + case 2: PORTD = (PORTD & ~0b01110111) | 0b01100101; break; \ + case 3: PORTD = (PORTD & ~0b01110111) | 0b00000011; break; \ + case 4: PORTD = (PORTD & ~0b01110111) | 0b00000111; break; \ + case 5: PORTD = (PORTD & ~0b01110111) | 0b00010011; break; \ + case 6: PORTD = (PORTD & ~0b01110111) | 0b00010111; break; \ + case 7: PORTD = (PORTD & ~0b01110111) | 0b00100011; break; \ + case 8: PORTD = (PORTD & ~0b01110111) | 0b00100111; break; \ + case 9: PORTD = (PORTD & ~0b01110111) | 0b00110011; break; \ + case 10: PORTD = (PORTD & ~0b01110111) | 0b01110010; break; \ + case 11: PORTD = (PORTD & ~0b01110111) | 0b01100110; break; \ + case 12: PORTD = (PORTD & ~0b01110111) | 0b01110000; break; \ + case 13: PORTD = (PORTD & ~0b01110111) | 0b01100100; break; \ + case 14: PORTD = (PORTD & ~0b01110111) | 0b01100000; break; \ + case 15: PORTD = (PORTD & ~0b01110111) | 0b01000111; break; \ + case 16: PORTD = (PORTD & ~0b01110111) | 0b01000011; break; \ + case 17: PORTD = (PORTD & ~0b01110111) | 0b00110111; break; + } +} + +void matrix_init(void) { + /* Column output pins */ \ + DDRD |= 0b01110111; \ + /* Row input pins */ \ + DDRC &= ~0b10000100; \ + DDRB &= ~0b01111110; \ + PORTC |= 0b10000100; \ + PORTB |= 0b01111110; + + for (uint8_t i=0; i < MATRIX_ROWS; i++) + matrix[i] = matrix_debouncing[i] = 0; + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + select_col(col); + _delay_us(3); + matrix_row_t col_scan = scan_col(); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col); + bool curr_bit = col_scan & (1<<row); + if (prev_bit != curr_bit) { + matrix_debouncing[row] ^= ((matrix_row_t)1<<col); + debouncing = DEBOUNCING_DELAY; + } + } + } + + if (debouncing) { + if (--debouncing) + _delay_ms(1); + else + for (uint8_t i = 0; i < MATRIX_ROWS; i++) + matrix[i] = matrix_debouncing[i]; + } + + matrix_scan_quantum(); + return 1; +} + +inline matrix_row_t matrix_get_row(uint8_t row) { + return matrix[row]; +} + +void matrix_print(void) { + #ifndef NO_PRINT + print("\nr\\c ABCDEFGHIJKLMNOPQR\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + matrix_row_t matrix_row = matrix_get_row(row); + xprintf("%02X: ", row); + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + bool curr_bit = matrix_row & (1<<col); + xprintf("%c", curr_bit ? '*' : '.'); + } + print("\n"); + } + #endif +} + +uint8_t matrix_key_count(void) { + uint8_t count = 0; + for (uint8_t row = 0; row < MATRIX_ROWS; row++) + count += bitpop32(matrix[row]); + return count; +} diff --git a/keyboards/bpiphany/tiger_lily/readme.md b/keyboards/bpiphany/tiger_lily/readme.md new file mode 100644 index 000000000..1fcb6c3d6 --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/readme.md @@ -0,0 +1,16 @@ +tiger_lily +========== + +This is the firmware for Rev. 20161114 of the Tiger Lily controller by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), a replacement controller for the [Filco Majestouch 2 104 key](https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1819). Bathroom Epiphanies has advised that the source is also compatible with the Black Petal controller, however I do not own an example to test against. + +The code was adapted from the [BathroomEpiphanies TMK Firmware](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers). + +Keyboard Maintainer: QMK Community +Hardware Supported: Tiger Lily +Hardware Availability: https://geekhack.org/index.php?topic=46700.0 + +Make example for this keyboard (after setting up your build environment): + + make bpiphany/tiger_lily:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bpiphany/tiger_lily/rules.mk b/keyboards/bpiphany/tiger_lily/rules.mk new file mode 100644 index 000000000..8f07bb006 --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/rules.mk @@ -0,0 +1,73 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI controls +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +CUSTOM_MATRIX = yes +SRC += matrix.c + +LAYOUTS = fullsize_ansi diff --git a/keyboards/bpiphany/tiger_lily/tiger_lily.c b/keyboards/bpiphany/tiger_lily/tiger_lily.c new file mode 100644 index 000000000..d2e7ba709 --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/tiger_lily.c @@ -0,0 +1,63 @@ +#include "tiger_lily.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + DDRB |= (1<<7); + DDRC |= (1<<5) | (1<<6); + + print_dec(usb_led); + + if (usb_led & (1<<USB_LED_NUM_LOCK)) + PORTC &= ~(1<<5); + else + PORTC |= (1<<5); + + if (usb_led & (1<<USB_LED_SCROLL_LOCK)) + PORTB &= ~(1<<7); + else + PORTB |= (1<<7); + + if (usb_led & (1<<USB_LED_CAPS_LOCK)) + PORTC &= ~(1<<6); + else + PORTC |= (1<<6); + + led_set_user(usb_led); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +__attribute__ ((weak)) +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +__attribute__ ((weak)) +void led_set_user(uint8_t usb_led) { +}
\ No newline at end of file diff --git a/keyboards/bpiphany/tiger_lily/tiger_lily.h b/keyboards/bpiphany/tiger_lily/tiger_lily.h new file mode 100644 index 000000000..65e4d9156 --- /dev/null +++ b/keyboards/bpiphany/tiger_lily/tiger_lily.h @@ -0,0 +1,71 @@ +#ifndef TIGER_LILY_H +#define TIGER_LILY_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array + +/* + Matrix col/row mapping + + ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. + | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 | + `----' `-------------------' `-------------------' `-------------------' `--------------' + ,-------------------------------------------------------------------------. ,--------------. ,-------------------. + | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 | + |-------------------------------------------------------------------------| |--------------| |-------------------| + | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 | + |-------------------------------------------------------------------------| '--------------' |-------------- | + | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | | K2 | L2 | Q2 | | + |-------------------------------------------------------------------------| ,----. |-------------------| + | N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | | K3 | L3 | Q3 | O3 | + |-------------------------------------------------------------------------| ,--------------. |-------------- | + | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6 | Q6 | | + `-------------------------------------------------------------------------' `--------------' `-------------------' +*/ +#define LAYOUT( \ + KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \ + KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \ + KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \ + KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \ + KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \ + KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \ +) \ +{ \ +/* Columns and rows need to be swapped in the below definition */ \ +/* A B C D E F G H I J K L M N O P Q R */ \ +/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KQ0, KR0 }, \ +/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1, KC_NO, KC_NO, KC_NO, KC_NO, KQ1, KC_NO }, \ +/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KC_NO, KN2, KC_NO, KP2, KQ2, KR2 }, \ +/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KQ3, KR3 }, \ +/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \ +/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KC_NO, KC_NO, KO5, KC_NO, KQ5, KR5 }, \ +/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO, KC_NO, KO6, KC_NO, KQ6, KR6 }, \ +/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \ +} + +#define LAYOUT_fullsize_ansi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{ \ +/* Columns and rows need to be swapped in the below definition */ \ +/* A B C D E F G H I J K L M N O P Q R */ \ +/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KQ0, KR0 }, \ +/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1, KC_NO, KC_NO, KC_NO, KC_NO, KQ1, KC_NO }, \ +/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KC_NO, KN2, KC_NO, KP2, KQ2, KR2 }, \ +/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KQ3, KR3 }, \ +/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \ +/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KC_NO, KC_NO, KO5, KC_NO, KQ5, KR5 }, \ +/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KC_NO, KJ6, KK6, KL6, KC_NO, KC_NO, KO6, KC_NO, KQ6, KR6 }, \ +/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \ +} + +#endif diff --git a/keyboards/bpiphany/unloved_bastard/config.h b/keyboards/bpiphany/unloved_bastard/config.h new file mode 100644 index 000000000..d89e85862 --- /dev/null +++ b/keyboards/bpiphany/unloved_bastard/config.h @@ -0,0 +1,168 @@ +/* +Copyright 2018 Alexander Fougner <fougner89 at gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1337 +#define DEVICE_VER 0x0001 +#define MANUFACTURER BathroomEpiphanies +#define PRODUCT Unloved Bastard +#define DESCRIPTION Unloved Bastard controller for CM Masterkeys S + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 18 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +#endif diff --git a/keyboards/bpiphany/unloved_bastard/info.json b/keyboards/bpiphany/unloved_bastard/info.json new file mode 100644 index 000000000..efa995088 --- /dev/null +++ b/keyboards/bpiphany/unloved_bastard/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "unloved_bastard", + "url": "", + "maintainer": "qmk", + "bootloader": "", + "width": 18.25, + "height": 6.5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] + }, + "LAYOUT_tkl_ansi": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] + } + } +} diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default/config.h b/keyboards/bpiphany/unloved_bastard/keymaps/default/config.h new file mode 100644 index 000000000..c55f7f9f7 --- /dev/null +++ b/keyboards/bpiphany/unloved_bastard/keymaps/default/config.h @@ -0,0 +1,24 @@ +/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "config_common.h" + +// place overrides here + +#endif diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default/keymap.c b/keyboards/bpiphany/unloved_bastard/keymaps/default/keymap.c new file mode 100644 index 000000000..ea103154e --- /dev/null +++ b/keyboards/bpiphany/unloved_bastard/keymaps/default/keymap.c @@ -0,0 +1,63 @@ +/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ) +}; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default/readme.md b/keyboards/bpiphany/unloved_bastard/keymaps/default/readme.md new file mode 100644 index 000000000..a2b5f1192 --- /dev/null +++ b/keyboards/bpiphany/unloved_bastard/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for unloved_bastard diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/config.h b/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/config.h new file mode 100644 index 000000000..c55f7f9f7 --- /dev/null +++ b/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/config.h @@ -0,0 +1,24 @@ +/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "config_common.h" + +// place overrides here + +#endif diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/keymap.c b/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/keymap.c new file mode 100644 index 000000000..16c0342d2 --- /dev/null +++ b/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/keymap.c @@ -0,0 +1,63 @@ +/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_tkl_ansi(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ) +}; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/readme.md b/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/readme.md new file mode 100644 index 000000000..00d90f12c --- /dev/null +++ b/keyboards/bpiphany/unloved_bastard/keymaps/default_ansi/readme.md @@ -0,0 +1,3 @@ +# default_ansi + +A standard tenkeyless ANSI-layout keymap for Unloved Bastard-powered keyboards. diff --git a/keyboards/bpiphany/unloved_bastard/matrix.c b/keyboards/bpiphany/unloved_bastard/matrix.c new file mode 100644 index 000000000..bb6de8613 --- /dev/null +++ b/keyboards/bpiphany/unloved_bastard/matrix.c @@ -0,0 +1,156 @@ +/* + Copyright 2017 Gabriel Young <gabeplaysdrums@live.com> + Copyright 2018 Alexander Fougner <fougner89 at gmail.com> + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +#ifndef DEBOUNCING_DELAY +# define DEBOUNCING_DELAY 5 +#endif +static uint8_t debouncing = DEBOUNCING_DELAY; + +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t scan_col(void) { + return ( + (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<0)) | + (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<1)) | + (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<2)) | + (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<3)) | + (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<4)) | + (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<5)) | + (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<6)) | + (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<7)) + ); +} + +static void select_col(uint8_t col) { + switch (col) { + case 0: PORTD = (PORTD & ~0b00111111) | 0b00110011; break; + case 1: PORTD = (PORTD & ~0b00111111) | 0b00100011; break; + case 2: PORTD = (PORTD & ~0b00111111) | 0b00010111; break; + case 3: PORTD = (PORTD & ~0b00111111) | 0b00110011; break; + case 4: PORTD = (PORTD & ~0b00111111) | 0b00010011; break; + case 5: PORTD = (PORTD & ~0b00111111) | 0b00011011; break; + case 6: PORTD = (PORTD & ~0b00111111) | 0b00110100; break; + case 7: PORTD = (PORTD & ~0b00111111) | 0b00111010; break; + case 8: PORTD = (PORTD & ~0b00111111) | 0b00111000; break; + case 9: PORTD = (PORTD & ~0b00111111) | 0b00111100; break; + case 10: PORTD = (PORTD & ~0b00111111) | 0b00110010; break; + case 11: PORTD = (PORTD & ~0b00111111) | 0b00011111; break; + case 12: PORTD = (PORTD & ~0b00111111) | 0b00001111; break; + case 13: PORTD = (PORTD & ~0b00111111) | 0b00100111; break; + case 14: PORTD = (PORTD & ~0b00111111) | 0b00000111; break; + case 15: PORTD = (PORTD & ~0b00111111) | 0b00110110; break; + case 16: PORTD = (PORTD & ~0b00111111) | 0b00001011; break; + case 17: PORTD = (PORTD & ~0b00111111) | 0b00000011; break; + } +} + +void matrix_init(void) { + /* Row output pins */ + DDRD |= 0b00111111; + /* Column input pins */ + DDRC &= ~0b10000000; + DDRB &= ~0b01111111; + PORTC |= 0b10000000; + PORTB |= 0b01111111; + + for (uint8_t i=0; i < MATRIX_ROWS; i++) + matrix[i] = matrix_debouncing[i] = 0; + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + select_col(col); + _delay_us(3); + matrix_row_t col_scan = scan_col(); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col); + bool curr_bit = col_scan & (1<<row); + if (prev_bit != curr_bit) { + matrix_debouncing[row] ^= ((matrix_row_t)1<<col); + debouncing = DEBOUNCING_DELAY; + } + } + } + + if (debouncing) { + if (--debouncing) + _delay_ms(1); + else + for (uint8_t i = 0; i < MATRIX_ROWS; i++) + matrix[i] = matrix_debouncing[i]; + } + + matrix_scan_quantum(); + return 1; +} + +inline matrix_row_t matrix_get_row(uint8_t row) { + return matrix[row]; +} + +void matrix_print(void) { +#ifndef NO_PRINT + print("\nr\\c ABCDEFGHIJKLMNOPQR\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + matrix_row_t matrix_row = matrix_get_row(row); + xprintf("%02X: ", row); + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + bool curr_bit = matrix_row & (1<<col); + xprintf("%c", curr_bit ? '*' : '.'); + } + print("\n"); + } +#endif +} + +uint8_t matrix_key_count(void) { + uint8_t count = 0; + for (uint8_t row = 0; row < MATRIX_ROWS; row++) + count += bitpop32(matrix[row]); + return count; +} diff --git a/keyboards/bpiphany/unloved_bastard/readme.md b/keyboards/bpiphany/unloved_bastard/readme.md new file mode 100644 index 000000000..9909d5af3 --- /dev/null +++ b/keyboards/bpiphany/unloved_bastard/readme.md @@ -0,0 +1,15 @@ +# unloved_bastard + + + +A short description of the keyboard/project + +Keyboard Maintainer: [Alexander Fougner](https://github.com/fougner) +Hardware Supported: CoolerMaster Masterkeys S PBT (Not the Pro versions with backlighting etc) +Hardware Availability: Pretty much anywhere + +Make example for this keyboard (after setting up your build environment): + + make bpiphany/unloved_bastard:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bpiphany/unloved_bastard/rules.mk b/keyboards/bpiphany/unloved_bastard/rules.mk new file mode 100644 index 000000000..2db321c57 --- /dev/null +++ b/keyboards/bpiphany/unloved_bastard/rules.mk @@ -0,0 +1,73 @@ +# MCU name +#MCU = at90usb1286 +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +CUSTOM_MATRIX = yes +SRC += matrix.c + +LAYOUTS = tkl_ansi diff --git a/keyboards/bpiphany/unloved_bastard/unloved_bastard.c b/keyboards/bpiphany/unloved_bastard/unloved_bastard.c new file mode 100644 index 000000000..197593060 --- /dev/null +++ b/keyboards/bpiphany/unloved_bastard/unloved_bastard.c @@ -0,0 +1,70 @@ +/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "unloved_bastard.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + led_init_ports(); + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + return process_record_user(keycode, record); +} + +// C5 left +// C6 middle led +// B7 right led +void led_init_ports(void) { + DDRB |= (1<<7); + DDRC |= (1<<5); + DDRC |= (1<<6); + + PORTB |= (1<<7); + PORTC |= (1<<5); + PORTC |= (1<<6); +} + + +void led_set_kb(uint8_t usb_led) { + + if (usb_led & (1<<USB_LED_CAPS_LOCK)) + PORTC &= ~(1<<5); + else + PORTC |= (1<<5); + + if (usb_led & (1<<USB_LED_NUM_LOCK)) + PORTB &= ~(1<<7); + else + PORTB |= (1<<7); + + if (usb_led & (1<<USB_LED_SCROLL_LOCK)) + PORTC &= ~(1<<6); + else + PORTC |= (1<<6); + + led_set_user(usb_led); +} diff --git a/keyboards/bpiphany/unloved_bastard/unloved_bastard.h b/keyboards/bpiphany/unloved_bastard/unloved_bastard.h new file mode 100644 index 000000000..9eaf587d7 --- /dev/null +++ b/keyboards/bpiphany/unloved_bastard/unloved_bastard.h @@ -0,0 +1,63 @@ +/* Copyright 2017 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef UNLOVED_BASTARD_H +#define UNLOVED_BASTARD_H + +#include "quantum.h" + +#define LAYOUT( \ + KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \ + KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \ + KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \ + KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \ + KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \ + KP4, KN2, KN6, KQ6, KN0, KN3, KM0, KP1, KC0, KQ0, KR0 \ +) \ +{ \ +/* Columns and rows need to be swapped in the below definition */ \ +/* A B C D E F G H I J K L M N O P Q R */ \ +/* 0 */ { KC_NO, KC_NO, KC0, KC_NO, KC_NO, KF0, KC_NO, KC_NO, KC_NO, KJ0, KK0, KC_NO, KM0, KN0, KO0, KC_NO, KQ0, KR0 }, \ +/* 1 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KG1, KH1, KI1, KJ1, KK1, KL1, KM1, KC_NO, KO1, KP1, KC_NO, KC_NO }, \ +/* 2 */ { KC_NO, KB2, KC_NO, KC_NO, KC_NO, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KM2, KN2, KO2, KC_NO, KC_NO, KC_NO }, \ +/* 3 */ { KC_NO, KB3, KC_NO, KC_NO, KC_NO, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KC_NO, KC_NO }, \ +/* 4 */ { KC_NO, KC_NO, KC4, KC_NO, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KM4, KC_NO, KO4, KP4, KQ4, KR4 }, \ +/* 5 */ { KC_NO, KC_NO, KC5, KC_NO, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KM5, KN5, KO5, KP5, KC_NO, KC_NO }, \ +/* 6 */ { KC_NO, KC_NO, KC6, KC_NO, KC_NO, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO,KN6, KO6, KC_NO, KQ6, KC_NO }, \ +/* 7 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KF7, KG7, KH7, KI7, KJ7, KK7, KL7, KM7, KN7, KC_NO, KP7, KC_NO, KC_NO } \ +} + +#define LAYOUT_tkl_ansi( \ + KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \ + KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \ + KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \ + KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \ + KB2, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \ + KP4, KN2, KN6, KQ6, KN0, KN3, KM0, KP1, KC0, KQ0, KR0 \ +) \ +{ \ +/* Columns and rows need to be swapped in the below definition */ \ +/* A B C D E F G H I J K L M N O P Q R */ \ +/* 0 */ { KC_NO, KC_NO, KC0, KC_NO, KC_NO, KF0, KC_NO, KC_NO, KC_NO, KJ0, KK0, KC_NO, KM0, KN0, KO0, KC_NO, KQ0, KR0 }, \ +/* 1 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KG1, KH1, KI1, KJ1, KK1, KL1, KM1, KC_NO, KO1, KP1, KC_NO, KC_NO }, \ +/* 2 */ { KC_NO, KB2, KC_NO, KC_NO, KC_NO, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KM2, KN2, KO2, KC_NO, KC_NO, KC_NO }, \ +/* 3 */ { KC_NO, KB3, KC_NO, KC_NO, KC_NO, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KC_NO, KC_NO }, \ +/* 4 */ { KC_NO, KC_NO, KC4, KC_NO, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KM4, KC_NO, KO4, KP4, KQ4, KR4 }, \ +/* 5 */ { KC_NO, KC_NO, KC5, KC_NO, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KM5, KN5, KO5, KP5, KC_NO, KC_NO }, \ +/* 6 */ { KC_NO, KC_NO, KC6, KC_NO, KC_NO, KF6, KG6, KC_NO, KI6, KJ6, KK6, KL6, KC_NO,KN6, KO6, KC_NO, KQ6, KC_NO }, \ +/* 7 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KF7, KG7, KH7, KI7, KJ7, KK7, KL7, KM7, KN7, KC_NO, KP7, KC_NO, KC_NO } \ +} + +#endif |