diff options
21 files changed, 4240 insertions, 0 deletions
diff --git a/keyboards/matrix/m20add/boards/m20add_bd/board.c b/keyboards/matrix/m20add/boards/m20add_bd/board.c new file mode 100644 index 000000000..68cf23cdd --- /dev/null +++ b/keyboards/matrix/m20add/boards/m20add_bd/board.c @@ -0,0 +1,268 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#include "hal.h" +#include "stm32_gpio.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/** + * @brief Type of STM32 GPIO port setup. + */ +typedef struct { + uint32_t moder; + uint32_t otyper; + uint32_t ospeedr; + uint32_t pupdr; + uint32_t odr; + uint32_t afrl; + uint32_t afrh; +} gpio_setup_t; + +/** + * @brief Type of STM32 GPIO initialization data. + */ +typedef struct { +#if STM32_HAS_GPIOA || defined(__DOXYGEN__) + gpio_setup_t PAData; +#endif +#if STM32_HAS_GPIOB || defined(__DOXYGEN__) + gpio_setup_t PBData; +#endif +#if STM32_HAS_GPIOC || defined(__DOXYGEN__) + gpio_setup_t PCData; +#endif +#if STM32_HAS_GPIOD || defined(__DOXYGEN__) + gpio_setup_t PDData; +#endif +#if STM32_HAS_GPIOE || defined(__DOXYGEN__) + gpio_setup_t PEData; +#endif +#if STM32_HAS_GPIOF || defined(__DOXYGEN__) + gpio_setup_t PFData; +#endif +#if STM32_HAS_GPIOG || defined(__DOXYGEN__) + gpio_setup_t PGData; +#endif +#if STM32_HAS_GPIOH || defined(__DOXYGEN__) + gpio_setup_t PHData; +#endif +#if STM32_HAS_GPIOI || defined(__DOXYGEN__) + gpio_setup_t PIData; +#endif +#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) + gpio_setup_t PJData; +#endif +#if STM32_HAS_GPIOK || defined(__DOXYGEN__) + gpio_setup_t PKData; +#endif +} gpio_config_t; + +/** + * @brief STM32 GPIO static initialization data. + */ +static const gpio_config_t gpio_default_config = { +#if STM32_HAS_GPIOA + {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, + VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, +#endif +#if STM32_HAS_GPIOB + {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, + VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, +#endif +#if STM32_HAS_GPIOC + {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, + VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, +#endif +#if STM32_HAS_GPIOD + {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, + VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, +#endif +#if STM32_HAS_GPIOE + {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, + VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, +#endif +#if STM32_HAS_GPIOF + {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, + VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, +#endif +#if STM32_HAS_GPIOG + {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, + VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, +#endif +#if STM32_HAS_GPIOH + {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, + VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, +#endif +#if STM32_HAS_GPIOI + {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, + VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, +#endif +#if STM32_HAS_GPIOJ + {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, + VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, +#endif +#if STM32_HAS_GPIOK + {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, + VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} +#endif +}; + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { + + gpiop->OTYPER = config->otyper; + gpiop->OSPEEDR = config->ospeedr; + gpiop->PUPDR = config->pupdr; + gpiop->ODR = config->odr; + gpiop->AFRL = config->afrl; + gpiop->AFRH = config->afrh; + gpiop->MODER = config->moder; +} + +static void stm32_gpio_init(void) { + + /* Enabling GPIO-related clocks, the mask comes from the + registry header file.*/ + rccResetAHB1(STM32_GPIO_EN_MASK); + rccEnableAHB1(STM32_GPIO_EN_MASK, true); + + /* Initializing all the defined GPIO ports.*/ +#if STM32_HAS_GPIOA + gpio_init(GPIOA, &gpio_default_config.PAData); +#endif +#if STM32_HAS_GPIOB + gpio_init(GPIOB, &gpio_default_config.PBData); +#endif +#if STM32_HAS_GPIOC + gpio_init(GPIOC, &gpio_default_config.PCData); +#endif +#if STM32_HAS_GPIOD + gpio_init(GPIOD, &gpio_default_config.PDData); +#endif +#if STM32_HAS_GPIOE + gpio_init(GPIOE, &gpio_default_config.PEData); +#endif +#if STM32_HAS_GPIOF + gpio_init(GPIOF, &gpio_default_config.PFData); +#endif +#if STM32_HAS_GPIOG + gpio_init(GPIOG, &gpio_default_config.PGData); +#endif +#if STM32_HAS_GPIOH + gpio_init(GPIOH, &gpio_default_config.PHData); +#endif +#if STM32_HAS_GPIOI + gpio_init(GPIOI, &gpio_default_config.PIData); +#endif +#if STM32_HAS_GPIOJ + gpio_init(GPIOJ, &gpio_default_config.PJData); +#endif +#if STM32_HAS_GPIOK + gpio_init(GPIOK, &gpio_default_config.PKData); +#endif +} + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/** + * @brief Early initialization code. + * @details GPIO ports and system clocks are initialized before everything + * else. + */ +void __early_init(void) { + extern void enter_bootloader_mode_if_requested(void); + enter_bootloader_mode_if_requested(); + + stm32_gpio_init(); + stm32_clock_init(); +} + +#if HAL_USE_SDC || defined(__DOXYGEN__) +/** + * @brief SDC card detection. + */ +bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief SDC card write protection detection. + */ +bool sdc_lld_is_write_protected(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif /* HAL_USE_SDC */ + +#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) +/** + * @brief MMC_SPI card detection. + */ +bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief MMC_SPI card write protection detection. + */ +bool mmc_lld_is_write_protected(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif + +/** + * @brief Board-specific initialization code. + * @todo Add your board-specific code, if any. + */ +void boardInit(void) { + +} diff --git a/keyboards/matrix/m20add/boards/m20add_bd/board.h b/keyboards/matrix/m20add/boards/m20add_bd/board.h new file mode 100644 index 000000000..9d8c248c5 --- /dev/null +++ b/keyboards/matrix/m20add/boards/m20add_bd/board.h @@ -0,0 +1,1299 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#ifndef BOARD_H +#define BOARD_H + +/* + * Board identifier. + */ +#define BOARD_MATRIX_NOAH +#define BOARD_NAME "Matrix 8XV2.0 ADD keyboard" +#define BOARD_OTG_NOVBUSSENS + +/* + * Board oscillators-related settings. + * NOTE: LSE not fitted. + */ +#if !defined(STM32_LSECLK) +#define STM32_LSECLK 0U +#endif + +#if !defined(STM32_HSECLK) +#define STM32_HSECLK 8000000U +#endif + +//#define STM32_HSE_BYPASS + +/* + * Board voltages. + * Required for performance limits calculation. + */ +#define STM32_VDD 300U + +/* + * MCU type as defined in the ST header. + */ +#define STM32F411xE + +/* + * IO pins assignments. + */ +#define GPIOA_PIN0 0U +#define GPIOA_PIN1 1U +#define GPIOA_PIN2 2U +#define GPIOA_PIN3 3U +#define GPIOA_PIN4 4U +#define GPIOA_SCK 5U +#define GPIOA_MISO 6U +#define GPIOA_MOSI 7U +#define GPIOA_PIN8 8U +#define GPIOA_PIN9 9U +#define GPIOA_PIN10 10U +#define GPIOA_OTG_FS_DM 11U +#define GPIOA_OTG_FS_DP 12U +#define GPIOA_SWDIO 13U +#define GPIOA_SWCLK 14U +#define GPIOA_PIN15 15U + +#define GPIOB_PIN0 0U +#define GPIOB_PIN1 1U +#define GPIOB_PIN2 2U +#define GPIOB_SWO 3U +#define GPIOB_PIN4 4U +#define GPIOB_PIN5 5U +#define GPIOB_PIN6 6U +#define GPIOB_PIN7 7U +#define GPIOB_PIN8 8U +#define GPIOB_PIN9 9U +#define GPIOB_PIN10 10U +#define GPIOB_PIN11 11U +#define GPIOB_PIN12 12U +#define GPIOB_PIN13 13U +#define GPIOB_PIN14 14U +#define GPIOB_PIN15 15U + +#define GPIOC_PIN0 0U +#define GPIOC_PIN1 1U +#define GPIOC_PIN2 2U +#define GPIOC_PIN3 3U +#define GPIOC_PIN4 4U +#define GPIOC_PIN5 5U +#define GPIOC_PIN6 6U +#define GPIOC_PIN7 7U +#define GPIOC_PIN8 8U +#define GPIOC_PIN9 9U +#define GPIOC_PIN10 10U +#define GPIOC_PIN11 11U +#define GPIOC_PIN12 12U +#define GPIOC_PIN13 13U +#define GPIOC_PIN14 14U +#define GPIOC_PIN15 15U + +#define GPIOD_PIN0 0U +#define GPIOD_PIN1 1U +#define GPIOD_PIN2 2U +#define GPIOD_PIN3 3U +#define GPIOD_PIN4 4U +#define GPIOD_PIN5 5U +#define GPIOD_PIN6 6U +#define GPIOD_PIN7 7U +#define GPIOD_PIN8 8U +#define GPIOD_PIN9 9U +#define GPIOD_PIN10 10U +#define GPIOD_PIN11 11U +#define GPIOD_PIN12 12U +#define GPIOD_PIN13 13U +#define GPIOD_PIN14 14U +#define GPIOD_PIN15 15U + +#define GPIOE_PIN0 0U +#define GPIOE_PIN1 1U +#define GPIOE_PIN2 2U +#define GPIOE_PIN3 3U +#define GPIOE_PIN4 4U +#define GPIOE_PIN5 5U +#define GPIOE_PIN6 6U +#define GPIOE_PIN7 7U +#define GPIOE_PIN8 8U +#define GPIOE_PIN9 9U +#define GPIOE_PIN10 10U +#define GPIOE_PIN11 11U +#define GPIOE_PIN12 12U +#define GPIOE_PIN13 13U +#define GPIOE_PIN14 14U +#define GPIOE_PIN15 15U + +#define GPIOF_PIN0 0U +#define GPIOF_PIN1 1U +#define GPIOF_PIN2 2U +#define GPIOF_PIN3 3U +#define GPIOF_PIN4 4U +#define GPIOF_PIN5 5U +#define GPIOF_PIN6 6U +#define GPIOF_PIN7 7U +#define GPIOF_PIN8 8U +#define GPIOF_PIN9 9U +#define GPIOF_PIN10 10U +#define GPIOF_PIN11 11U +#define GPIOF_PIN12 12U +#define GPIOF_PIN13 13U +#define GPIOF_PIN14 14U +#define GPIOF_PIN15 15U + +#define GPIOG_PIN0 0U +#define GPIOG_PIN1 1U +#define GPIOG_PIN2 2U +#define GPIOG_PIN3 3U +#define GPIOG_PIN4 4U +#define GPIOG_PIN5 5U +#define GPIOG_PIN6 6U +#define GPIOG_PIN7 7U +#define GPIOG_PIN8 8U +#define GPIOG_PIN9 9U +#define GPIOG_PIN10 10U +#define GPIOG_PIN11 11U +#define GPIOG_PIN12 12U +#define GPIOG_PIN13 13U +#define GPIOG_PIN14 14U +#define GPIOG_PIN15 15U + +#define GPIOH_OSC_IN 0U +#define GPIOH_OSC_OUT 1U +#define GPIOH_PIN2 2U +#define GPIOH_PIN3 3U +#define GPIOH_PIN4 4U +#define GPIOH_PIN5 5U +#define GPIOH_PIN6 6U +#define GPIOH_PIN7 7U +#define GPIOH_PIN8 8U +#define GPIOH_PIN9 9U +#define GPIOH_PIN10 10U +#define GPIOH_PIN11 11U +#define GPIOH_PIN12 12U +#define GPIOH_PIN13 13U +#define GPIOH_PIN14 14U +#define GPIOH_PIN15 15U + +#define GPIOI_PIN0 0U +#define GPIOI_PIN1 1U +#define GPIOI_PIN2 2U +#define GPIOI_PIN3 3U +#define GPIOI_PIN4 4U +#define GPIOI_PIN5 5U +#define GPIOI_PIN6 6U +#define GPIOI_PIN7 7U +#define GPIOI_PIN8 8U +#define GPIOI_PIN9 9U +#define GPIOI_PIN10 10U +#define GPIOI_PIN11 11U +#define GPIOI_PIN12 12U +#define GPIOI_PIN13 13U +#define GPIOI_PIN14 14U +#define GPIOI_PIN15 15U + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * Please refer to the STM32 Reference Manual for details. + */ +#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) +#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) +#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) +#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) +#define PIN_ODR_LOW(n) (0U << (n)) +#define PIN_ODR_HIGH(n) (1U << (n)) +#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) +#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) +#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) +#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) +#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) +#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) +#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) +#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) +#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) +#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) + +/* + * GPIOA setup: + * + * PA0 - (input pullup). + * PA1 - (input pullup). + * PA2 - (input pullup). + * PA3 - (input pullup). + * PA4 - (input pullup). + * PA5 - SPI SCK (alternate 5). + * PA6 - SPI MISO (alternate 5). + * PA7 - SPI MOSI (alternate 5). + * PA8 - (input pullup). + * PA9 - (input pullup). + * PA10 - (input pullup). + * PA11 - OTG_FS_DM (alternate 10). + * PA12 - OTG_FS_DP (alternate 10). + * PA13 - SWDIO (alternate 0). + * PA14 - SWCLK (alternate 0). + * PA15 - (input pullup). + */ +#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \ + PIN_MODE_INPUT(GPIOA_PIN1) | \ + PIN_MODE_INPUT(GPIOA_PIN2) | \ + PIN_MODE_INPUT(GPIOA_PIN3) | \ + PIN_MODE_INPUT(GPIOA_PIN4) | \ + PIN_MODE_ALTERNATE(GPIOA_SCK) | \ + PIN_MODE_ALTERNATE(GPIOA_MISO) | \ + PIN_MODE_ALTERNATE(GPIOA_MOSI) | \ + PIN_MODE_INPUT(GPIOA_PIN8) | \ + PIN_MODE_INPUT(GPIOA_PIN9) | \ + PIN_MODE_INPUT(GPIOA_PIN10) | \ + PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \ + PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \ + PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ + PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ + PIN_MODE_INPUT(GPIOA_PIN15)) +#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SCK) | \ + PIN_OTYPE_PUSHPULL(GPIOA_MISO) | \ + PIN_OTYPE_PUSHPULL(GPIOA_MOSI) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | \ + PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) +#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ + PIN_OSPEED_HIGH(GPIOA_SCK) | \ + PIN_OSPEED_HIGH(GPIOA_MISO) | \ + PIN_OSPEED_HIGH(GPIOA_MOSI) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ + PIN_OSPEED_HIGH(GPIOA_OTG_FS_DM) | \ + PIN_OSPEED_HIGH(GPIOA_OTG_FS_DP) | \ + PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ + PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN15)) +#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOA_SCK) | \ + PIN_PUPDR_PULLUP(GPIOA_MISO) | \ + PIN_PUPDR_PULLUP(GPIOA_MOSI) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ + PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | \ + PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | \ + PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ + PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN15)) +#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \ + PIN_ODR_HIGH(GPIOA_PIN1) | \ + PIN_ODR_HIGH(GPIOA_PIN2) | \ + PIN_ODR_HIGH(GPIOA_PIN3) | \ + PIN_ODR_HIGH(GPIOA_PIN4) | \ + PIN_ODR_HIGH(GPIOA_SCK) | \ + PIN_ODR_HIGH(GPIOA_MISO) | \ + PIN_ODR_HIGH(GPIOA_MOSI) | \ + PIN_ODR_HIGH(GPIOA_PIN8) | \ + PIN_ODR_HIGH(GPIOA_PIN9) | \ + PIN_ODR_HIGH(GPIOA_PIN10) | \ + PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | \ + PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | \ + PIN_ODR_HIGH(GPIOA_SWDIO) | \ + PIN_ODR_HIGH(GPIOA_SWCLK) | \ + PIN_ODR_HIGH(GPIOA_PIN15)) +#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOA_SCK, 5U) | \ + PIN_AFIO_AF(GPIOA_MISO, 5U) | \ + PIN_AFIO_AF(GPIOA_MOSI, 5U)) +#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10U) | \ + PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10U) | \ + PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ + PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN15, 0U)) + +/* + * GPIOB setup: + * + * PB0 - (input pullup). + * PB1 - (input pullup). + * PB2 - (input pullup). + * PB3 - SWO (alternate 0). + * PB4 - (input pullup). + * PB5 - (input pullup). + * PB6 - (input pullup). + * PB7 - (input pullup). + * PB8 - (input pullup). + * PB9 - (input pullup). + * PB10 - (input pullup). + * PB11 - (input pullup). + * PB12 - (input pullup). + * PB13 - (input pullup). + * PB14 - (input pullup). + * PB15 - (input pullup). + */ +#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ + PIN_MODE_INPUT(GPIOB_PIN1) | \ + PIN_MODE_INPUT(GPIOB_PIN2) | \ + PIN_MODE_ALTERNATE(GPIOB_SWO) | \ + PIN_MODE_INPUT(GPIOB_PIN4) | \ + PIN_MODE_INPUT(GPIOB_PIN5) | \ + PIN_MODE_INPUT(GPIOB_PIN6) | \ + PIN_MODE_INPUT(GPIOB_PIN7) | \ + PIN_MODE_INPUT(GPIOB_PIN8) | \ + PIN_MODE_INPUT(GPIOB_PIN9) | \ + PIN_MODE_INPUT(GPIOB_PIN10) | \ + PIN_MODE_INPUT(GPIOB_PIN11) | \ + PIN_MODE_INPUT(GPIOB_PIN12) | \ + PIN_MODE_INPUT(GPIOB_PIN13) | \ + PIN_MODE_INPUT(GPIOB_PIN14) | \ + PIN_MODE_INPUT(GPIOB_PIN15)) +#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOB_SWO) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) +#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN2) | \ + PIN_OSPEED_HIGH(GPIOB_SWO) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN15)) +#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOB_SWO) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN15)) +#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ + PIN_ODR_HIGH(GPIOB_PIN1) | \ + PIN_ODR_HIGH(GPIOB_PIN2) | \ + PIN_ODR_HIGH(GPIOB_SWO) | \ + PIN_ODR_HIGH(GPIOB_PIN4) | \ + PIN_ODR_HIGH(GPIOB_PIN5) | \ + PIN_ODR_HIGH(GPIOB_PIN6) | \ + PIN_ODR_HIGH(GPIOB_PIN7) | \ + PIN_ODR_HIGH(GPIOB_PIN8) | \ + PIN_ODR_HIGH(GPIOB_PIN9) | \ + PIN_ODR_HIGH(GPIOB_PIN10) | \ + PIN_ODR_HIGH(GPIOB_PIN11) | \ + PIN_ODR_HIGH(GPIOB_PIN12) | \ + PIN_ODR_HIGH(GPIOB_PIN13) | \ + PIN_ODR_HIGH(GPIOB_PIN14) | \ + PIN_ODR_HIGH(GPIOB_PIN15)) +#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOB_SWO, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN7, 0U)) +#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN15, 0U)) + +/* + * GPIOC setup: + * + * PC0 - (input pullup). + * PC1 - (input pullup). + * PC2 - (input pullup). + * PC3 - (input pullup). + * PC4 - (input pullup). + * PC5 - (input pullup). + * PC6 - (input pullup). + * PC7 - (input pullup). + * PC8 - (input pullup). + * PC9 - (input pullup). + * PC10 - (input pullup). + * PC11 - (input pullup). + * PC12 - (input pullup). + * PC13 - (input floating). + * PC14 - (input floating). + * PC15 - (input floating). + */ +#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \ + PIN_MODE_INPUT(GPIOC_PIN1) | \ + PIN_MODE_INPUT(GPIOC_PIN2) | \ + PIN_MODE_INPUT(GPIOC_PIN3) | \ + PIN_MODE_INPUT(GPIOC_PIN4) | \ + PIN_MODE_INPUT(GPIOC_PIN5) | \ + PIN_MODE_INPUT(GPIOC_PIN6) | \ + PIN_MODE_INPUT(GPIOC_PIN7) | \ + PIN_MODE_INPUT(GPIOC_PIN8) | \ + PIN_MODE_INPUT(GPIOC_PIN9) | \ + PIN_MODE_INPUT(GPIOC_PIN10) | \ + PIN_MODE_INPUT(GPIOC_PIN11) | \ + PIN_MODE_INPUT(GPIOC_PIN12) | \ + PIN_MODE_INPUT(GPIOC_PIN13) | \ + PIN_MODE_INPUT(GPIOC_PIN14) | \ + PIN_MODE_INPUT(GPIOC_PIN15)) +#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) +#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN15)) +#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN15)) +#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \ + PIN_ODR_HIGH(GPIOC_PIN1) | \ + PIN_ODR_HIGH(GPIOC_PIN2) | \ + PIN_ODR_HIGH(GPIOC_PIN3) | \ + PIN_ODR_HIGH(GPIOC_PIN4) | \ + PIN_ODR_HIGH(GPIOC_PIN5) | \ + PIN_ODR_HIGH(GPIOC_PIN6) | \ + PIN_ODR_HIGH(GPIOC_PIN7) | \ + PIN_ODR_HIGH(GPIOC_PIN8) | \ + PIN_ODR_HIGH(GPIOC_PIN9) | \ + PIN_ODR_HIGH(GPIOC_PIN10) | \ + PIN_ODR_HIGH(GPIOC_PIN11) | \ + PIN_ODR_HIGH(GPIOC_PIN12) | \ + PIN_ODR_HIGH(GPIOC_PIN13) | \ + PIN_ODR_HIGH(GPIOC_PIN14) | \ + PIN_ODR_HIGH(GPIOC_PIN15)) +#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN7, 0U)) +#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN15, 0U)) + +/* + * GPIOD setup: + * + * PD0 - PIN0 (input pullup). + * PD1 - PIN1 (input pullup). + * PD2 - PIN2 (input pullup). + * PD3 - PIN3 (input pullup). + * PD4 - PIN4 (input pullup). + * PD5 - PIN5 (input pullup). + * PD6 - PIN6 (input pullup). + * PD7 - PIN7 (input pullup). + * PD8 - PIN8 (input pullup). + * PD9 - PIN9 (input pullup). + * PD10 - PIN10 (input pullup). + * PD11 - PIN11 (input pullup). + * PD12 - PIN12 (input pullup). + * PD13 - PIN13 (input pullup). + * PD14 - PIN14 (input pullup). + * PD15 - PIN15 (input pullup). + */ +#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ + PIN_MODE_INPUT(GPIOD_PIN1) | \ + PIN_MODE_INPUT(GPIOD_PIN2) | \ + PIN_MODE_INPUT(GPIOD_PIN3) | \ + PIN_MODE_INPUT(GPIOD_PIN4) | \ + PIN_MODE_INPUT(GPIOD_PIN5) | \ + PIN_MODE_INPUT(GPIOD_PIN6) | \ + PIN_MODE_INPUT(GPIOD_PIN7) | \ + PIN_MODE_INPUT(GPIOD_PIN8) | \ + PIN_MODE_INPUT(GPIOD_PIN9) | \ + PIN_MODE_INPUT(GPIOD_PIN10) | \ + PIN_MODE_INPUT(GPIOD_PIN11) | \ + PIN_MODE_INPUT(GPIOD_PIN12) | \ + PIN_MODE_INPUT(GPIOD_PIN13) | \ + PIN_MODE_INPUT(GPIOD_PIN14) | \ + PIN_MODE_INPUT(GPIOD_PIN15)) +#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) +#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | \ + PIN_OSPEED_HIGH(GPIOD_PIN1) | \ + PIN_OSPEED_HIGH(GPIOD_PIN2) | \ + PIN_OSPEED_HIGH(GPIOD_PIN3) | \ + PIN_OSPEED_HIGH(GPIOD_PIN4) | \ + PIN_OSPEED_HIGH(GPIOD_PIN5) | \ + PIN_OSPEED_HIGH(GPIOD_PIN6) | \ + PIN_OSPEED_HIGH(GPIOD_PIN7) | \ + PIN_OSPEED_HIGH(GPIOD_PIN8) | \ + PIN_OSPEED_HIGH(GPIOD_PIN9) | \ + PIN_OSPEED_HIGH(GPIOD_PIN10) | \ + PIN_OSPEED_HIGH(GPIOD_PIN11) | \ + PIN_OSPEED_HIGH(GPIOD_PIN12) | \ + PIN_OSPEED_HIGH(GPIOD_PIN13) | \ + PIN_OSPEED_HIGH(GPIOD_PIN14) | \ + PIN_OSPEED_HIGH(GPIOD_PIN15)) +#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN15)) +#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ + PIN_ODR_HIGH(GPIOD_PIN1) | \ + PIN_ODR_HIGH(GPIOD_PIN2) | \ + PIN_ODR_HIGH(GPIOD_PIN3) | \ + PIN_ODR_HIGH(GPIOD_PIN4) | \ + PIN_ODR_HIGH(GPIOD_PIN5) | \ + PIN_ODR_HIGH(GPIOD_PIN6) | \ + PIN_ODR_HIGH(GPIOD_PIN7) | \ + PIN_ODR_HIGH(GPIOD_PIN8) | \ + PIN_ODR_HIGH(GPIOD_PIN9) | \ + PIN_ODR_HIGH(GPIOD_PIN10) | \ + PIN_ODR_HIGH(GPIOD_PIN11) | \ + PIN_ODR_HIGH(GPIOD_PIN12) | \ + PIN_ODR_HIGH(GPIOD_PIN13) | \ + PIN_ODR_HIGH(GPIOD_PIN14) | \ + PIN_ODR_HIGH(GPIOD_PIN15)) +#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN7, 0U)) +#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN15, 0U)) + +/* + * GPIOE setup: + * + * PE0 - PIN0 (input pullup). + * PE1 - PIN1 (input pullup). + * PE2 - PIN2 (input pullup). + * PE3 - PIN3 (input pullup). + * PE4 - PIN4 (input pullup). + * PE5 - PIN5 (input pullup). + * PE6 - PIN6 (input pullup). + * PE7 - PIN7 (input pullup). + * PE8 - PIN8 (input pullup). + * PE9 - PIN9 (input pullup). + * PE10 - PIN10 (input pullup). + * PE11 - PIN11 (input pullup). + * PE12 - PIN12 (input pullup). + * PE13 - PIN13 (input pullup). + * PE14 - PIN14 (input pullup). + * PE15 - PIN15 (input pullup). + */ +#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ + PIN_MODE_INPUT(GPIOE_PIN1) | \ + PIN_MODE_INPUT(GPIOE_PIN2) | \ + PIN_MODE_INPUT(GPIOE_PIN3) | \ + PIN_MODE_INPUT(GPIOE_PIN4) | \ + PIN_MODE_INPUT(GPIOE_PIN5) | \ + PIN_MODE_INPUT(GPIOE_PIN6) | \ + PIN_MODE_INPUT(GPIOE_PIN7) | \ + PIN_MODE_INPUT(GPIOE_PIN8) | \ + PIN_MODE_INPUT(GPIOE_PIN9) | \ + PIN_MODE_INPUT(GPIOE_PIN10) | \ + PIN_MODE_INPUT(GPIOE_PIN11) | \ + PIN_MODE_INPUT(GPIOE_PIN12) | \ + PIN_MODE_INPUT(GPIOE_PIN13) | \ + PIN_MODE_INPUT(GPIOE_PIN14) | \ + PIN_MODE_INPUT(GPIOE_PIN15)) +#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) +#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_PIN0) | \ + PIN_OSPEED_HIGH(GPIOE_PIN1) | \ + PIN_OSPEED_HIGH(GPIOE_PIN2) | \ + PIN_OSPEED_HIGH(GPIOE_PIN3) | \ + PIN_OSPEED_HIGH(GPIOE_PIN4) | \ + PIN_OSPEED_HIGH(GPIOE_PIN5) | \ + PIN_OSPEED_HIGH(GPIOE_PIN6) | \ + PIN_OSPEED_HIGH(GPIOE_PIN7) | \ + PIN_OSPEED_HIGH(GPIOE_PIN8) | \ + PIN_OSPEED_HIGH(GPIOE_PIN9) | \ + PIN_OSPEED_HIGH(GPIOE_PIN10) | \ + PIN_OSPEED_HIGH(GPIOE_PIN11) | \ + PIN_OSPEED_HIGH(GPIOE_PIN12) | \ + PIN_OSPEED_HIGH(GPIOE_PIN13) | \ + PIN_OSPEED_HIGH(GPIOE_PIN14) | \ + PIN_OSPEED_HIGH(GPIOE_PIN15)) +#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN15)) +#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ + PIN_ODR_HIGH(GPIOE_PIN1) | \ + PIN_ODR_HIGH(GPIOE_PIN2) | \ + PIN_ODR_HIGH(GPIOE_PIN3) | \ + PIN_ODR_HIGH(GPIOE_PIN4) | \ + PIN_ODR_HIGH(GPIOE_PIN5) | \ + PIN_ODR_HIGH(GPIOE_PIN6) | \ + PIN_ODR_HIGH(GPIOE_PIN7) | \ + PIN_ODR_HIGH(GPIOE_PIN8) | \ + PIN_ODR_HIGH(GPIOE_PIN9) | \ + PIN_ODR_HIGH(GPIOE_PIN10) | \ + PIN_ODR_HIGH(GPIOE_PIN11) | \ + PIN_ODR_HIGH(GPIOE_PIN12) | \ + PIN_ODR_HIGH(GPIOE_PIN13) | \ + PIN_ODR_HIGH(GPIOE_PIN14) | \ + PIN_ODR_HIGH(GPIOE_PIN15)) +#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN7, 0U)) +#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN15, 0U)) + +/* + * GPIOF setup: + * + * PF0 - PIN0 (input pullup). + * PF1 - PIN1 (input pullup). + * PF2 - PIN2 (input pullup). + * PF3 - PIN3 (input pullup). + * PF4 - PIN4 (input pullup). + * PF5 - PIN5 (input pullup). + * PF6 - PIN6 (input pullup). + * PF7 - PIN7 (input pullup). + * PF8 - PIN8 (input pullup). + * PF9 - PIN9 (input pullup). + * PF10 - PIN10 (input pullup). + * PF11 - PIN11 (input pullup). + * PF12 - PIN12 (input pullup). + * PF13 - PIN13 (input pullup). + * PF14 - PIN14 (input pullup). + * PF15 - PIN15 (input pullup). + */ +#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | \ + PIN_MODE_INPUT(GPIOF_PIN1) | \ + PIN_MODE_INPUT(GPIOF_PIN2) | \ + PIN_MODE_INPUT(GPIOF_PIN3) | \ + PIN_MODE_INPUT(GPIOF_PIN4) | \ + PIN_MODE_INPUT(GPIOF_PIN5) | \ + PIN_MODE_INPUT(GPIOF_PIN6) | \ + PIN_MODE_INPUT(GPIOF_PIN7) | \ + PIN_MODE_INPUT(GPIOF_PIN8) | \ + PIN_MODE_INPUT(GPIOF_PIN9) | \ + PIN_MODE_INPUT(GPIOF_PIN10) | \ + PIN_MODE_INPUT(GPIOF_PIN11) | \ + PIN_MODE_INPUT(GPIOF_PIN12) | \ + PIN_MODE_INPUT(GPIOF_PIN13) | \ + PIN_MODE_INPUT(GPIOF_PIN14) | \ + PIN_MODE_INPUT(GPIOF_PIN15)) +#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) +#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | \ + PIN_OSPEED_HIGH(GPIOF_PIN1) | \ + PIN_OSPEED_HIGH(GPIOF_PIN2) | \ + PIN_OSPEED_HIGH(GPIOF_PIN3) | \ + PIN_OSPEED_HIGH(GPIOF_PIN4) | \ + PIN_OSPEED_HIGH(GPIOF_PIN5) | \ + PIN_OSPEED_HIGH(GPIOF_PIN6) | \ + PIN_OSPEED_HIGH(GPIOF_PIN7) | \ + PIN_OSPEED_HIGH(GPIOF_PIN8) | \ + PIN_OSPEED_HIGH(GPIOF_PIN9) | \ + PIN_OSPEED_HIGH(GPIOF_PIN10) | \ + PIN_OSPEED_HIGH(GPIOF_PIN11) | \ + PIN_OSPEED_HIGH(GPIOF_PIN12) | \ + PIN_OSPEED_HIGH(GPIOF_PIN13) | \ + PIN_OSPEED_HIGH(GPIOF_PIN14) | \ + PIN_OSPEED_HIGH(GPIOF_PIN15)) +#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN15)) +#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | \ + PIN_ODR_HIGH(GPIOF_PIN1) | \ + PIN_ODR_HIGH(GPIOF_PIN2) | \ + PIN_ODR_HIGH(GPIOF_PIN3) | \ + PIN_ODR_HIGH(GPIOF_PIN4) | \ + PIN_ODR_HIGH(GPIOF_PIN5) | \ + PIN_ODR_HIGH(GPIOF_PIN6) | \ + PIN_ODR_HIGH(GPIOF_PIN7) | \ + PIN_ODR_HIGH(GPIOF_PIN8) | \ + PIN_ODR_HIGH(GPIOF_PIN9) | \ + PIN_ODR_HIGH(GPIOF_PIN10) | \ + PIN_ODR_HIGH(GPIOF_PIN11) | \ + PIN_ODR_HIGH(GPIOF_PIN12) | \ + PIN_ODR_HIGH(GPIOF_PIN13) | \ + PIN_ODR_HIGH(GPIOF_PIN14) | \ + PIN_ODR_HIGH(GPIOF_PIN15)) +#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN7, 0U)) +#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN15, 0U)) + +/* + * GPIOG setup: + * + * PG0 - PIN0 (input pullup). + * PG1 - PIN1 (input pullup). + * PG2 - PIN2 (input pullup). + * PG3 - PIN3 (input pullup). + * PG4 - PIN4 (input pullup). + * PG5 - PIN5 (input pullup). + * PG6 - PIN6 (input pullup). + * PG7 - PIN7 (input pullup). + * PG8 - PIN8 (input pullup). + * PG9 - PIN9 (input pullup). + * PG10 - PIN10 (input pullup). + * PG11 - PIN11 (input pullup). + * PG12 - PIN12 (input pullup). + * PG13 - PIN13 (input pullup). + * PG14 - PIN14 (input pullup). + * PG15 - PIN15 (input pullup). + */ +#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \ + PIN_MODE_INPUT(GPIOG_PIN1) | \ + PIN_MODE_INPUT(GPIOG_PIN2) | \ + PIN_MODE_INPUT(GPIOG_PIN3) | \ + PIN_MODE_INPUT(GPIOG_PIN4) | \ + PIN_MODE_INPUT(GPIOG_PIN5) | \ + PIN_MODE_INPUT(GPIOG_PIN6) | \ + PIN_MODE_INPUT(GPIOG_PIN7) | \ + PIN_MODE_INPUT(GPIOG_PIN8) | \ + PIN_MODE_INPUT(GPIOG_PIN9) | \ + PIN_MODE_INPUT(GPIOG_PIN10) | \ + PIN_MODE_INPUT(GPIOG_PIN11) | \ + PIN_MODE_INPUT(GPIOG_PIN12) | \ + PIN_MODE_INPUT(GPIOG_PIN13) | \ + PIN_MODE_INPUT(GPIOG_PIN14) | \ + PIN_MODE_INPUT(GPIOG_PIN15)) +#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) +#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_HIGH(GPIOG_PIN0) | \ + PIN_OSPEED_HIGH(GPIOG_PIN1) | \ + PIN_OSPEED_HIGH(GPIOG_PIN2) | \ + PIN_OSPEED_HIGH(GPIOG_PIN3) | \ + PIN_OSPEED_HIGH(GPIOG_PIN4) | \ + PIN_OSPEED_HIGH(GPIOG_PIN5) | \ + PIN_OSPEED_HIGH(GPIOG_PIN6) | \ + PIN_OSPEED_HIGH(GPIOG_PIN7) | \ + PIN_OSPEED_HIGH(GPIOG_PIN8) | \ + PIN_OSPEED_HIGH(GPIOG_PIN9) | \ + PIN_OSPEED_HIGH(GPIOG_PIN10) | \ + PIN_OSPEED_HIGH(GPIOG_PIN11) | \ + PIN_OSPEED_HIGH(GPIOG_PIN12) | \ + PIN_OSPEED_HIGH(GPIOG_PIN13) | \ + PIN_OSPEED_HIGH(GPIOG_PIN14) | \ + PIN_OSPEED_HIGH(GPIOG_PIN15)) +#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN15)) +#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \ + PIN_ODR_HIGH(GPIOG_PIN1) | \ + PIN_ODR_HIGH(GPIOG_PIN2) | \ + PIN_ODR_HIGH(GPIOG_PIN3) | \ + PIN_ODR_HIGH(GPIOG_PIN4) | \ + PIN_ODR_HIGH(GPIOG_PIN5) | \ + PIN_ODR_HIGH(GPIOG_PIN6) | \ + PIN_ODR_HIGH(GPIOG_PIN7) | \ + PIN_ODR_HIGH(GPIOG_PIN8) | \ + PIN_ODR_HIGH(GPIOG_PIN9) | \ + PIN_ODR_HIGH(GPIOG_PIN10) | \ + PIN_ODR_HIGH(GPIOG_PIN11) | \ + PIN_ODR_HIGH(GPIOG_PIN12) | \ + PIN_ODR_HIGH(GPIOG_PIN13) | \ + PIN_ODR_HIGH(GPIOG_PIN14) | \ + PIN_ODR_HIGH(GPIOG_PIN15)) +#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN7, 0U)) +#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN15, 0U)) + +/* + * GPIOH setup: + * + * PH0 - OSC_IN (input floating). + * PH1 - OSC_OUT (input floating). + * PH2 - PIN2 (input pullup). + * PH3 - PIN3 (input pullup). + * PH4 - PIN4 (input pullup). + * PH5 - PIN5 (input pullup). + * PH6 - PIN6 (input pullup). + * PH7 - PIN7 (input pullup). + * PH8 - PIN8 (input pullup). + * PH9 - PIN9 (input pullup). + * PH10 - PIN10 (input pullup). + * PH11 - PIN11 (input pullup). + * PH12 - PIN12 (input pullup). + * PH13 - PIN13 (input pullup). + * PH14 - PIN14 (input pullup). + * PH15 - PIN15 (input pullup). + */ +#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \ + PIN_MODE_INPUT(GPIOH_OSC_OUT) | \ + PIN_MODE_INPUT(GPIOH_PIN2) | \ + PIN_MODE_INPUT(GPIOH_PIN3) | \ + PIN_MODE_INPUT(GPIOH_PIN4) | \ + PIN_MODE_INPUT(GPIOH_PIN5) | \ + PIN_MODE_INPUT(GPIOH_PIN6) | \ + PIN_MODE_INPUT(GPIOH_PIN7) | \ + PIN_MODE_INPUT(GPIOH_PIN8) | \ + PIN_MODE_INPUT(GPIOH_PIN9) | \ + PIN_MODE_INPUT(GPIOH_PIN10) | \ + PIN_MODE_INPUT(GPIOH_PIN11) | \ + PIN_MODE_INPUT(GPIOH_PIN12) | \ + PIN_MODE_INPUT(GPIOH_PIN13) | \ + PIN_MODE_INPUT(GPIOH_PIN14) | \ + PIN_MODE_INPUT(GPIOH_PIN15)) +#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | \ + PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) +#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_HIGH(GPIOH_OSC_IN) | \ + PIN_OSPEED_HIGH(GPIOH_OSC_OUT) | \ + PIN_OSPEED_HIGH(GPIOH_PIN2) | \ + PIN_OSPEED_HIGH(GPIOH_PIN3) | \ + PIN_OSPEED_HIGH(GPIOH_PIN4) | \ + PIN_OSPEED_HIGH(GPIOH_PIN5) | \ + PIN_OSPEED_HIGH(GPIOH_PIN6) | \ + PIN_OSPEED_HIGH(GPIOH_PIN7) | \ + PIN_OSPEED_HIGH(GPIOH_PIN8) | \ + PIN_OSPEED_HIGH(GPIOH_PIN9) | \ + PIN_OSPEED_HIGH(GPIOH_PIN10) | \ + PIN_OSPEED_HIGH(GPIOH_PIN11) | \ + PIN_OSPEED_HIGH(GPIOH_PIN12) | \ + PIN_OSPEED_HIGH(GPIOH_PIN13) | \ + PIN_OSPEED_HIGH(GPIOH_PIN14) | \ + PIN_OSPEED_HIGH(GPIOH_PIN15)) +#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | \ + PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN15)) +#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | \ + PIN_ODR_HIGH(GPIOH_OSC_OUT) | \ + PIN_ODR_HIGH(GPIOH_PIN2) | \ + PIN_ODR_HIGH(GPIOH_PIN3) | \ + PIN_ODR_HIGH(GPIOH_PIN4) | \ + PIN_ODR_HIGH(GPIOH_PIN5) | \ + PIN_ODR_HIGH(GPIOH_PIN6) | \ + PIN_ODR_HIGH(GPIOH_PIN7) | \ + PIN_ODR_HIGH(GPIOH_PIN8) | \ + PIN_ODR_HIGH(GPIOH_PIN9) | \ + PIN_ODR_HIGH(GPIOH_PIN10) | \ + PIN_ODR_HIGH(GPIOH_PIN11) | \ + PIN_ODR_HIGH(GPIOH_PIN12) | \ + PIN_ODR_HIGH(GPIOH_PIN13) | \ + PIN_ODR_HIGH(GPIOH_PIN14) | \ + PIN_ODR_HIGH(GPIOH_PIN15)) +#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0U) | \ + PIN_AFIO_AF(GPIOH_OSC_OUT, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN7, 0U)) +#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN15, 0U)) + +/* + * GPIOI setup: + * + * PI0 - PIN0 (input pullup). + * PI1 - PIN1 (input pullup). + * PI2 - PIN2 (input pullup). + * PI3 - PIN3 (input pullup). + * PI4 - PIN4 (input pullup). + * PI5 - PIN5 (input pullup). + * PI6 - PIN6 (input pullup). + * PI7 - PIN7 (input pullup). + * PI8 - PIN8 (input pullup). + * PI9 - PIN9 (input pullup). + * PI10 - PIN10 (input pullup). + * PI11 - PIN11 (input pullup). + * PI12 - PIN12 (input pullup). + * PI13 - PIN13 (input pullup). + * PI14 - PIN14 (input pullup). + * PI15 - PIN15 (input pullup). + */ +#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | \ + PIN_MODE_INPUT(GPIOI_PIN1) | \ + PIN_MODE_INPUT(GPIOI_PIN2) | \ + PIN_MODE_INPUT(GPIOI_PIN3) | \ + PIN_MODE_INPUT(GPIOI_PIN4) | \ + PIN_MODE_INPUT(GPIOI_PIN5) | \ + PIN_MODE_INPUT(GPIOI_PIN6) | \ + PIN_MODE_INPUT(GPIOI_PIN7) | \ + PIN_MODE_INPUT(GPIOI_PIN8) | \ + PIN_MODE_INPUT(GPIOI_PIN9) | \ + PIN_MODE_INPUT(GPIOI_PIN10) | \ + PIN_MODE_INPUT(GPIOI_PIN11) | \ + PIN_MODE_INPUT(GPIOI_PIN12) | \ + PIN_MODE_INPUT(GPIOI_PIN13) | \ + PIN_MODE_INPUT(GPIOI_PIN14) | \ + PIN_MODE_INPUT(GPIOI_PIN15)) +#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN15)) +#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_HIGH(GPIOI_PIN0) | \ + PIN_OSPEED_HIGH(GPIOI_PIN1) | \ + PIN_OSPEED_HIGH(GPIOI_PIN2) | \ + PIN_OSPEED_HIGH(GPIOI_PIN3) | \ + PIN_OSPEED_HIGH(GPIOI_PIN4) | \ + PIN_OSPEED_HIGH(GPIOI_PIN5) | \ + PIN_OSPEED_HIGH(GPIOI_PIN6) | \ + PIN_OSPEED_HIGH(GPIOI_PIN7) | \ + PIN_OSPEED_HIGH(GPIOI_PIN8) | \ + PIN_OSPEED_HIGH(GPIOI_PIN9) | \ + PIN_OSPEED_HIGH(GPIOI_PIN10) | \ + PIN_OSPEED_HIGH(GPIOI_PIN11) | \ + PIN_OSPEED_HIGH(GPIOI_PIN12) | \ + PIN_OSPEED_HIGH(GPIOI_PIN13) | \ + PIN_OSPEED_HIGH(GPIOI_PIN14) | \ + PIN_OSPEED_HIGH(GPIOI_PIN15)) +#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN15)) +#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | \ + PIN_ODR_HIGH(GPIOI_PIN1) | \ + PIN_ODR_HIGH(GPIOI_PIN2) | \ + PIN_ODR_HIGH(GPIOI_PIN3) | \ + PIN_ODR_HIGH(GPIOI_PIN4) | \ + PIN_ODR_HIGH(GPIOI_PIN5) | \ + PIN_ODR_HIGH(GPIOI_PIN6) | \ + PIN_ODR_HIGH(GPIOI_PIN7) | \ + PIN_ODR_HIGH(GPIOI_PIN8) | \ + PIN_ODR_HIGH(GPIOI_PIN9) | \ + PIN_ODR_HIGH(GPIOI_PIN10) | \ + PIN_ODR_HIGH(GPIOI_PIN11) | \ + PIN_ODR_HIGH(GPIOI_PIN12) | \ + PIN_ODR_HIGH(GPIOI_PIN13) | \ + PIN_ODR_HIGH(GPIOI_PIN14) | \ + PIN_ODR_HIGH(GPIOI_PIN15)) +#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN7, 0U)) +#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN15, 0U)) + + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* BOARD_H */ diff --git a/keyboards/matrix/m20add/boards/m20add_bd/board.mk b/keyboards/matrix/m20add/boards/m20add_bd/board.mk new file mode 100644 index 000000000..a12d8670d --- /dev/null +++ b/keyboards/matrix/m20add/boards/m20add_bd/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/boards/m20add_bd/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/boards/m20add_bd + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/keyboards/matrix/m20add/bootloader_defs.h b/keyboards/matrix/m20add/bootloader_defs.h new file mode 100644 index 000000000..20b8f73e6 --- /dev/null +++ b/keyboards/matrix/m20add/bootloader_defs.h @@ -0,0 +1,7 @@ +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here: + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 diff --git a/keyboards/matrix/m20add/chconf.h b/keyboards/matrix/m20add/chconf.h new file mode 100644 index 000000000..7dc4f84a8 --- /dev/null +++ b/keyboards/matrix/m20add/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM TRUE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/matrix/m20add/config.h b/keyboards/matrix/m20add/config.h new file mode 100644 index 000000000..8c3f922ab --- /dev/null +++ b/keyboards/matrix/m20add/config.h @@ -0,0 +1,96 @@ +/** + * config.h + * + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4D58 // MX +#define PRODUCT_ID 0x20AD // 8XV2.0 Additional +#define DEVICE_VER 0x0001 +#define MANUFACTURER MATRIX +#define PRODUCT 8XV2.0 Additional + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 16 + +#define DEF_PIN(port, pin) (((port) << 8) | pin) +#define GET_PORT(pp) (((pp) >> 8) & 0xFF) +#define GET_PIN(pp) ((pp) & 0xFF) + +#define ROW1_MASK 0x80 +#define ROW2_MASK 0x40 +#define ROW3_MASK 0x01 +#define ROW4_MASK 0x04 +#define ROW5_MASK 0x10 +#define ROW6_MASK 0x20 +#define ROW_PORT TCA6424_PORT2 + +#define COL1_MASK 0x02 +#define COL2_MASK 0x80 +#define COL3_MASK 0x40 +#define COL4_MASK 0x20 +#define COL5_MASK 0x10 +#define COL6_MASK 0x08 +#define COL7_MASK 0x04 +#define COL8_MASK 0x02 +#define COL9_MASK 0x01 +#define COL10_MASK 0x80 +#define COL11_MASK 0x40 +#define COL12_MASK 0x20 +#define COL13_MASK 0x10 +#define COL14_MASK 0x08 +#define COL15_MASK 0x04 +#define COL16_MASK 0x02 + +#define MATRIX_ROW_PINS { \ + DEF_PIN(TCA6424_PORT2, 7), \ + DEF_PIN(TCA6424_PORT2, 6), \ + DEF_PIN(TCA6424_PORT2, 0), \ + DEF_PIN(TCA6424_PORT2, 2), \ + DEF_PIN(TCA6424_PORT2, 4), \ + DEF_PIN(TCA6424_PORT2, 5) } + +#define MATRIX_COL_PINS { \ + DEF_PIN(TCA6424_PORT2, 1), \ + DEF_PIN(TCA6424_PORT1, 7), \ + DEF_PIN(TCA6424_PORT1, 6), \ + DEF_PIN(TCA6424_PORT1, 5), \ + DEF_PIN(TCA6424_PORT1, 4), \ + DEF_PIN(TCA6424_PORT1, 3), \ + DEF_PIN(TCA6424_PORT1, 2), \ + DEF_PIN(TCA6424_PORT1, 1), \ + DEF_PIN(TCA6424_PORT1, 0), \ + DEF_PIN(TCA6424_PORT0, 7), \ + DEF_PIN(TCA6424_PORT0, 6), \ + DEF_PIN(TCA6424_PORT0, 5), \ + DEF_PIN(TCA6424_PORT0, 4), \ + DEF_PIN(TCA6424_PORT0, 3), \ + DEF_PIN(TCA6424_PORT0, 2), \ + DEF_PIN(TCA6424_PORT0, 1) } + +#define UNUSED_PINS + + +#define DIODE_DIRECTION COL2ROW +#define DEBOUNCE 5 + +// i2c setting +#define USE_I2CV1 +#define I2C1_SCL 8 +#define I2C1_SDA 9 +#define I2C1_CLOCK_SPEED 400000 +#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 + +// rgb light setting +#define RGB_DI_PIN B4 // reserved pin for future usage +#define RGBLED_NUM 20 +#define RGBLIGHT_ANIMATIONS + +#define DRIVER_ADDR_1 0b1110100 +#define DRIVER_COUNT 1 +#define DRIVER_LED_TOTAL RGBLED_NUM + +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP FALSE // disable jump to system bootloader diff --git a/keyboards/matrix/m20add/halconf.h b/keyboards/matrix/m20add/halconf.h new file mode 100644 index 000000000..dca1abbaf --- /dev/null +++ b/keyboards/matrix/m20add/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC TRUE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION FALSE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/matrix/m20add/info.json b/keyboards/matrix/m20add/info.json new file mode 100644 index 000000000..389916ce8 --- /dev/null +++ b/keyboards/matrix/m20add/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "Matrix 2.0 Additional", + "url": "", + "maintainer": "qmk", + "width": 18.25, + "height": 6.5, + "layouts": { + "LAYOUT_tkl_ansi_tsangan": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, {"label":"Win", "x":1.5, "y":5.5}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":7}, {"label":"Alt", "x":11, "y":5.5, "w":1.5}, {"label":"Menu", "x":12.5, "y":5.5}, {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] + }, + "LAYOUT_tkl_iso_tsangan": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"\u00ac", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"\"", "x":2, "y":1.5}, {"label":"\u00a3", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"@", "x":11.75, "y":3.5}, {"label":"~", "x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, {"label":"Win", "x":1.5, "y":5.5}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":7}, {"label":"AltGr", "x":11, "y":5.5, "w":1.5}, {"label":"Menu", "x":12.5, "y":5.5}, {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] + } + } +} diff --git a/keyboards/matrix/m20add/keymaps/default/keymap.c b/keyboards/matrix/m20add/keymaps/default/keymap.c new file mode 100644 index 000000000..e7ddc00cc --- /dev/null +++ b/keyboards/matrix/m20add/keymaps/default/keymap.c @@ -0,0 +1,26 @@ +/** + * keymap.c + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0]=LAYOUT_tkl_ansi_tsangan( + + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, LT(1,KC_PAUS), + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + [1]=LAYOUT_tkl_ansi_tsangan( + KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_NLCK, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, + RESET, _______, _______, KC_F24, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, + _______, _______, _______, KC_MPLY, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), +}; diff --git a/keyboards/matrix/m20add/keymaps/iso/keymap.c b/keyboards/matrix/m20add/keymaps/iso/keymap.c new file mode 100644 index 000000000..c57bdfcd4 --- /dev/null +++ b/keyboards/matrix/m20add/keymaps/iso/keymap.c @@ -0,0 +1,24 @@ +/** + * keymap.c + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0]=LAYOUT_tkl_iso_tsangan( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, LT(1,KC_PAUS), + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_LGUI, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + [1]=LAYOUT_tkl_iso_tsangan( + KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_NLCK, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, + _______, _______, _______, KC_MPLY, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), +}; diff --git a/keyboards/matrix/m20add/ld/m20add_boot.ld b/keyboards/matrix/m20add/ld/m20add_boot.ld new file mode 100644 index 000000000..3abdd1529 --- /dev/null +++ b/keyboards/matrix/m20add/ld/m20add_boot.ld @@ -0,0 +1,85 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F411xE memory setup. + */ +MEMORY +{ + flash0 : org = 0x08020000, len = 512k-128k + flash1 : org = 0x00000000, len = 0 + flash2 : org = 0x00000000, len = 0 + flash3 : org = 0x00000000, len = 0 + flash4 : org = 0x00000000, len = 0 + flash5 : org = 0x00000000, len = 0 + flash6 : org = 0x00000000, len = 0 + flash7 : org = 0x00000000, len = 0 + ram0 : org = 0x20000000, len = 128k + ram1 : org = 0x00000000, len = 0 + ram2 : org = 0x00000000, len = 0 + ram3 : org = 0x00000000, len = 0 + ram4 : org = 0x00000000, len = 0 + ram5 : org = 0x00000000, len = 0 + ram6 : org = 0x00000000, len = 0 + ram7 : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash0); +REGION_ALIAS("XTORS_FLASH_LMA", flash0); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash0); +REGION_ALIAS("TEXT_FLASH_LMA", flash0); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash0); +REGION_ALIAS("RODATA_FLASH_LMA", flash0); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash0); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash0); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/keyboards/matrix/m20add/m20add.c b/keyboards/matrix/m20add/m20add.c new file mode 100644 index 000000000..b38dad27c --- /dev/null +++ b/keyboards/matrix/m20add/m20add.c @@ -0,0 +1,80 @@ +/** + * m20add.c + */ + +#include "m20add.h" +#include "tca6424.h" +#include "rgb_ring.h" +#include "i2c_master.h" + +void set_pin(uint16_t pin) +{ + uint8_t data = tca6424_read_port(GET_PORT(pin)); + data |= ( 1 << GET_PIN(pin)); + tca6424_write_port(GET_PORT(pin), data); +} + +void clear_pin(uint16_t pin) +{ + uint8_t data = tca6424_read_port(GET_PORT(pin)); + data &= ~( 1 << GET_PIN(pin)); + tca6424_write_port(GET_PORT(pin), data); +} + +uint8_t read_pin(uint16_t pin) +{ + uint8_t data = tca6424_read_port(GET_PORT(pin)); + return (data & (1<<GET_PIN(pin))) ? 1 : 0; +} + +void matrix_init_kb(void) { +#ifdef RGBLIGHT_ENABLE + rgb_ring_init(); +#endif + matrix_init_user(); +} + +void matrix_scan_kb(void) { +#ifdef RGBLIGHT_ENABLE + rgb_ring_task(); +#endif + matrix_scan_user(); +} + +static uint16_t caps_lock_pin = DEF_PIN(TCA6424_PORT2, 3); +static uint16_t scroll_lock_pin = DEF_PIN(TCA6424_PORT0, 1); + +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if (res) { + led_state.caps_lock ? set_pin(caps_lock_pin) : clear_pin(caps_lock_pin); + led_state.scroll_lock ? set_pin(scroll_lock_pin) : clear_pin(scroll_lock_pin); + } + return res; +} + +// override the default implementation to avoid re-initialization +void i2c_init(void) +{ + static bool initialized = false; + if (initialized) { + return; + } else { + initialized = true; + } + + // Try releasing special pins for a short time + palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT); + palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT); + + chThdSleepMilliseconds(10); + palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); + palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); +} + +#define REBOOT_MAGIC 0x41544B42 +void shutdown_user(void) +{ + // set the magic number for resetting to the bootloader + *(uint32_t *)(&(RTCD1.rtc->BKP0R)) = REBOOT_MAGIC; +} diff --git a/keyboards/matrix/m20add/m20add.h b/keyboards/matrix/m20add/m20add.h new file mode 100644 index 000000000..1c85dc3bd --- /dev/null +++ b/keyboards/matrix/m20add/m20add.h @@ -0,0 +1,46 @@ +/** + * m20add.h + */ + +#pragma once + +#include "quantum.h" + + +#define LAYOUT_tkl_iso_tsangan( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ + \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K215, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, \ + K500, K501, K502, K503, K504, K505, K506, K507, K508, K509 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015}, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115}, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214, K116}, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K215, K216}, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO, K413,KC_NO}, \ + { K500, K501, K502, KC_NO, KC_NO, KC_NO, K503, KC_NO, K504, K505, K506, K507, K508, KC_NO, K509,KC_NO}, \ +} + +#define LAYOUT_tkl_ansi_tsangan( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ + \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ + K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, \ + K500, K501, K502, K503, K504, K505, K506, K507, K508, K509 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015}, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115}, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K116}, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K215, K216}, \ + { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO, K413,KC_NO}, \ + { K500, K501, K502, KC_NO, KC_NO, KC_NO, K503, KC_NO, K504, K505, K506, K507, K508, KC_NO, K509,KC_NO}, \ +} + +void set_pin(uint16_t pin); +void clear_pin(uint16_t pin); +uint8_t read_pin(uint16_t pin); diff --git a/keyboards/matrix/m20add/matrix.c b/keyboards/matrix/m20add/matrix.c new file mode 100644 index 000000000..b17643fea --- /dev/null +++ b/keyboards/matrix/m20add/matrix.c @@ -0,0 +1,93 @@ +/** + * matrix.c + */ + +#include <stdint.h> +#include <stdbool.h> +#include <string.h> +#include "quantum.h" +#include "matrix.h" +#include "tca6424.h" +#include "m20add.h" + +static const uint16_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +void matrix_init_custom(void) +{ + tca6424_init(); + // set port0 + tca6424_write_config(TCA6424_PORT0, 0); + // set port1 + tca6424_write_config(TCA6424_PORT1, 0); + // set port2 + tca6424_write_config(TCA6424_PORT2, 0xF5); + + // clear output + tca6424_write_port(TCA6424_PORT0, 0); + tca6424_write_port(TCA6424_PORT1, 0); + tca6424_write_port(TCA6424_PORT2, 0); +} + + +static uint8_t row_mask[] = {ROW1_MASK,ROW2_MASK,ROW3_MASK,ROW4_MASK,ROW5_MASK,ROW6_MASK}; +static uint8_t col_mask[] = {COL1_MASK, COL2_MASK, COL3_MASK, COL4_MASK, COL5_MASK, COL6_MASK, COL7_MASK, COL8_MASK, COL9_MASK, COL10_MASK, COL11_MASK, COL12_MASK, COL13_MASK, COL14_MASK, COL15_MASK, COL16_MASK}; + +bool matrix_scan_custom(matrix_row_t current_matrix[]) +{ + bool changed = false; + uint8_t p0_data = tca6424_read_port(TCA6424_PORT0); + + for (int col = 0; col < MATRIX_COLS; col++) { + // Select col and wait for col selecton to stabilize + switch(col) { + case 0: + set_pin(col_pins[col]); + break; + case 1 ... 8: + tca6424_write_port(TCA6424_PORT1, col_mask[col]); + break; + default: + tca6424_write_port(TCA6424_PORT0, col_mask[col]|(p0_data&0x01)); + break; + } + matrix_io_delay(); + + // read row port for all rows + uint8_t row_value = tca6424_read_port(ROW_PORT); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + uint8_t tmp = row; + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[tmp]; + + // Check row pin state + if (row_value & row_mask[row]) { + // Pin HI, set col bit + current_matrix[tmp] |= (1 << col); + } else { + // Pin LOW, clear col bit + current_matrix[tmp] &= ~(1 << col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_matrix[tmp]) && !(changed)) { + changed = true; + } + } + // Unselect col + switch(col) { + case 0: + clear_pin(col_pins[col]); + break; + case 8: + tca6424_write_port(TCA6424_PORT1, 0); + break; + case 15: + tca6424_write_port(TCA6424_PORT0, p0_data&0x01); + break; + default: + break; + } + } + + return changed; +} diff --git a/keyboards/matrix/m20add/mcuconf.h b/keyboards/matrix/m20add/mcuconf.h new file mode 100644 index 000000000..54a1f2661 --- /dev/null +++ b/keyboards/matrix/m20add/mcuconf.h @@ -0,0 +1,253 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 192 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 4 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 TRUE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/keyboards/matrix/m20add/readme.md b/keyboards/matrix/m20add/readme.md new file mode 100644 index 000000000..fd3ef7fec --- /dev/null +++ b/keyboards/matrix/m20add/readme.md @@ -0,0 +1,13 @@ +# 8XV2.0 Additional keyboard + +This was the upgraded version of the Matrix 8XV2.0 keyboard + +Keyboard Maintainer: [astro](https://github.com/yulei) +Hardware Supported: Matrix 8XV2.0 Additional keyboard +Hardware Availability: + +Make example for this keyboard (after setting up your build environment): + + make matrix/m20add:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/matrix/m20add/rgb_ring.c b/keyboards/matrix/m20add/rgb_ring.c new file mode 100644 index 000000000..fa70dea7e --- /dev/null +++ b/keyboards/matrix/m20add/rgb_ring.c @@ -0,0 +1,457 @@ +/** + * @file rgb_ring.c + * @author astro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "rgb_ring.h" + +#include <string.h> +#include "quantum.h" +#include "rgblight.h" +#include "issi/is31fl3731.h" +#include "i2c_master.h" + + +#ifndef RGBLIGHT_ENABLE +#error "MUST enable rgblight" +#endif +// rgb ring leds setting + +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, C1_1, C3_2, C4_2}, + {0, C1_2, C2_2, C4_3}, + {0, C1_3, C2_3, C3_3}, + {0, C1_4, C2_4, C3_4}, + {0, C1_5, C2_5, C3_5}, + {0, C1_6, C2_6, C3_6}, + {0, C1_7, C2_7, C3_7}, + {0, C1_8, C2_8, C3_8}, + + {0, C9_1, C8_1, C7_1}, + {0, C9_2, C8_2, C7_2}, + {0, C9_3, C8_3, C7_3}, + {0, C9_4, C8_4, C7_4}, + {0, C9_5, C8_5, C7_5}, + {0, C9_6, C8_6, C7_6}, + {0, C9_7, C8_7, C6_6}, + {0, C9_8, C7_7, C6_7}, + + {0, C1_9, C3_10, C4_10}, + {0, C1_10, C2_10, C4_11}, + {0, C1_11, C2_11, C3_11}, + {0, C1_12, C2_12, C3_12}, +}; + +#define RING_OUTER_BEGIN 0 +#define RING_OUTER_END 15 +#define RING_OUTER_SIZE (RING_OUTER_END + 1 - RING_OUTER_BEGIN) + +#define RING_INNER_BEGIN 16 +#define RING_INNER_END 19 +#define RING_INNER_SIZE (RING_INNER_END + 1 - RING_INNER_BEGIN) + +#define SPEED_MAX 100 +#define SPEED_STEP 10 + +typedef enum { + RING_STATE_INIT, + RING_STATE_QMK, + RING_STATE_CUSTOM, +} RING_STATE; + +typedef enum { + RING_EFFECT_1, + RING_EFFECT_2, + RING_EFFECT_3, + RING_EFFECT_4, + RING_EFFECT_5, + RING_EFFECT_6, + RING_EFFECT_MAX +} RING_EFFECT; + +typedef struct { + uint8_t state; + uint8_t effect; + uint8_t speed; + uint8_t outer_index; + uint8_t inner_index; + uint8_t effect_count; + uint8_t led_begin; + uint8_t led_end; + bool led_forward; + bool led_clear; +} rgb_ring_t; + +static rgb_ring_t rgb_ring = { + .state = RING_STATE_INIT, + .effect = RING_EFFECT_1, + .speed = 10, + .outer_index = 0, + .inner_index = 0, + .effect_count = 0, + .led_begin = RING_OUTER_BEGIN, + .led_end = RING_OUTER_END, + .led_forward = true, + .led_clear = false, +}; + +static void rgb_ring_reset(void) +{ + rgb_ring.effect_count = 0; + rgb_ring.led_begin = RING_OUTER_BEGIN; + rgb_ring.led_end = RING_OUTER_END; + rgb_ring.led_forward = true; + rgb_ring.led_clear = false; +} + +extern animation_status_t animation_status; +extern rgblight_config_t rgblight_config; + +#define EFFECT_TEST_INTERVAL 50 +#define EFFECT_TEST_COUNT 5 +#define EFFECT_TEST_HUE_STEP 85 +#define EFFECT_TEST_VAL_STEP 17 +static void testing_mode(void) +{ + if (timer_elapsed(animation_status.last_timer) > EFFECT_TEST_INTERVAL) { + HSV h = {rgblight_config.hue, rgblight_config.sat, rgblight_config.val}; + RGB c = hsv_to_rgb(h); + //IS31FL3731_set_color_all(c.r, c.g, c.b); + IS31FL3731_set_color_all(0, 0, 0); + IS31FL3731_set_color(rgb_ring.outer_index+RING_OUTER_BEGIN, c.r, c.g, c.b); + h.v = EFFECT_TEST_VAL_STEP*rgb_ring.outer_index; + c = hsv_to_rgb(h); + for (uint8_t i = RING_INNER_BEGIN; i <= RING_INNER_END; i++) { + IS31FL3731_set_color(i, c.r, c.g, c.b); + } + rgb_ring.outer_index = (rgb_ring.outer_index + 1) % RING_OUTER_SIZE; + //rgb_ring.inner_index = (rgb_ring.inner_index + 1) % RING_INNER_SIZE; + + if (rgb_ring.outer_index == RING_OUTER_BEGIN) { + rgblight_config.hue += EFFECT_TEST_HUE_STEP; + rgb_ring.effect_count++; + } + animation_status.last_timer = timer_read(); + } + if (rgb_ring.effect_count > EFFECT_TEST_COUNT) { + rgb_ring_reset(); + rgb_ring.state = RING_STATE_QMK; + rgblight_set(); + } +} + +static bool need_update(uint32_t max_interval) +{ + uint32_t interval = timer_elapsed(animation_status.last_timer); + return (interval*rgb_ring.speed) > max_interval; +} + +static void update_effect(uint32_t max_count) +{ + if (rgb_ring.effect_count > max_count) { + rgb_ring_reset(); + rgb_ring.effect = (rgb_ring.effect + 1) % RING_EFFECT_MAX; + } +} + +#define EFFECT_1_INTERVAL 1000 +#define EFFECT_1_COUNT 64 +#define EFFECT_1_HUE_STEP 15 + +static void ring_effect_no_1(void) +{ + if (need_update(EFFECT_1_INTERVAL)) { + HSV h = {rgblight_config.hue, rgblight_config.sat, rgblight_config.val}; + for (uint8_t i = RING_OUTER_BEGIN; i <= RING_OUTER_END; i++) { + RGB c = hsv_to_rgb(h); + IS31FL3731_set_color(i, c.r, c.g, c.b); + } + rgblight_config.hue += EFFECT_1_HUE_STEP; + rgb_ring.effect_count++; + animation_status.last_timer = timer_read(); + } + + update_effect(EFFECT_1_COUNT); +} + +#define EFFECT_2_INTERVAL 1000 +#define EFFECT_2_COUNT 64 +#define EFFECT_2_HUE_STEP 15 + +static void ring_effect_no_2(void) +{ + if (need_update(EFFECT_2_INTERVAL)) { + IS31FL3731_set_color_all(0, 0, 0); + HSV h = {rgblight_config.hue, rgblight_config.sat, rgblight_config.val}; + RGB c = hsv_to_rgb(h); + + IS31FL3731_set_color(rgb_ring.led_begin, c.r, c.g, c.b); + IS31FL3731_set_color(rgb_ring.led_end, c.r, c.g, c.b); + + rgb_ring.led_begin = (rgb_ring.led_begin + 1) % RING_OUTER_SIZE; + rgb_ring.led_end = (rgb_ring.led_end + RING_OUTER_SIZE - 1) % RING_OUTER_SIZE; + + rgblight_config.hue += EFFECT_2_HUE_STEP; + rgb_ring.effect_count++; + animation_status.last_timer = timer_read(); + } + + update_effect(EFFECT_2_COUNT); +} + +#define EFFECT_3_INTERVAL 1000 +#define EFFECT_3_COUNT 64 +#define EFFECT_3_HUE_STEP 15 + +static void ring_effect_no_3(void) +{ + if (rgb_ring.effect_count == 0) { + IS31FL3731_set_color_all(0, 0, 0); + } + + if (need_update(EFFECT_3_INTERVAL)) { + HSV h = {rgblight_config.hue, rgblight_config.sat, rgblight_config.val}; + + if (rgb_ring.led_clear) { + IS31FL3731_set_color(rgb_ring.led_begin, 0, 0, 0); + IS31FL3731_set_color(rgb_ring.led_end, 0, 0, 0); + } else { + RGB c = hsv_to_rgb(h); + IS31FL3731_set_color(rgb_ring.led_begin, c.r, c.g, c.b); + IS31FL3731_set_color(rgb_ring.led_end, c.r, c.g, c.b); + } + + rgb_ring.led_begin = (rgb_ring.led_begin + 1) % RING_OUTER_SIZE; + if (rgb_ring.led_begin == rgb_ring.led_end) { + if (rgb_ring.led_forward) { + rgb_ring.led_begin = RING_OUTER_BEGIN; + rgb_ring.led_end = RING_OUTER_END+1; + } else { + rgb_ring.led_begin = RING_OUTER_BEGIN + RING_OUTER_SIZE/2; + rgb_ring.led_end = RING_OUTER_END+1 - RING_OUTER_SIZE/2; + } + + if (!rgb_ring.led_clear) { + rgb_ring.led_forward = !rgb_ring.led_forward; + } + + rgb_ring.led_clear = !rgb_ring.led_clear; + } + + rgb_ring.led_end = (rgb_ring.led_end + RING_OUTER_SIZE - 1) % RING_OUTER_SIZE; + + rgblight_config.hue += EFFECT_3_HUE_STEP; + rgb_ring.effect_count++; + animation_status.last_timer = timer_read(); + } + + update_effect(EFFECT_3_COUNT); +} + +#define EFFECT_4_INTERVAL 1000 +#define EFFECT_4_COUNT 64 +#define EFFECT_4_STEP 3 +static void ring_effect_no_4(void) +{ + if (need_update(EFFECT_4_INTERVAL)) { + IS31FL3731_set_color_all(0, 0, 0); + HSV h = {rgblight_config.hue, rgblight_config.sat, rgblight_config.val}; + RGB c = hsv_to_rgb(h); + + IS31FL3731_set_color(rgb_ring.led_begin, c.r, c.g, c.b); + IS31FL3731_set_color(rgb_ring.led_end, c.r, c.g, c.b); + + rgb_ring.led_begin = (rgb_ring.led_begin + EFFECT_4_STEP) % RING_OUTER_SIZE; + rgb_ring.led_end = (rgb_ring.led_end + RING_OUTER_SIZE - EFFECT_4_STEP) % RING_OUTER_SIZE; + + rgblight_config.hue += EFFECT_1_HUE_STEP; + rgb_ring.effect_count++; + animation_status.last_timer = timer_read(); + } + + update_effect(EFFECT_4_COUNT); +} + +#define EFFECT_5_INTERVAL 1000 +#define EFFECT_5_COUNT 64 +#define EFFECT_5_HUE_STEP 16 +static void ring_effect_no_5(void) +{ + if (need_update(EFFECT_5_INTERVAL)) { + IS31FL3731_set_color_all(0, 0, 0); + for (uint8_t i = RING_INNER_BEGIN; i <= RING_INNER_END; i++) { + HSV h = {rgblight_config.hue, rgblight_config.sat, rgblight_config.val}; + RGB c = hsv_to_rgb(h); + IS31FL3731_set_color(i, c.r, c.g, c.b); + } + for (uint8_t i = RING_OUTER_BEGIN; i <= RING_OUTER_END; i++) { + HSV h = {rgblight_config.hue+EFFECT_5_HUE_STEP, rgblight_config.sat, rgblight_config.val}; + RGB c = hsv_to_rgb(h); + IS31FL3731_set_color(i, c.r, c.g, c.b); + } + rgblight_config.hue += EFFECT_5_HUE_STEP; + rgb_ring.effect_count++; + animation_status.last_timer = timer_read(); + } + + update_effect(EFFECT_5_COUNT); +} + +#define EFFECT_6_INTERVAL 1000 +#define EFFECT_6_COUNT 64 +#define EFFECT_I_HUE_STEP 10 +#define EFFECT_O_HUE_STEP 10 +static void ring_effect_no_6(void) +{ + if (need_update(EFFECT_6_INTERVAL)) { + IS31FL3731_set_color_all(0, 0, 0); + for (uint8_t i = RING_INNER_BEGIN; i <= RING_INNER_END; i++) { + HSV h = {rgblight_config.hue+i*EFFECT_I_HUE_STEP, rgblight_config.sat, rgblight_config.val}; + RGB c = hsv_to_rgb(h); + IS31FL3731_set_color(i, c.r, c.g, c.b); + } + for (uint8_t i = RING_OUTER_BEGIN; i <= RING_OUTER_END; i++) { + HSV h = {rgblight_config.hue+i*EFFECT_O_HUE_STEP, rgblight_config.sat, rgblight_config.val}; + RGB c = hsv_to_rgb(h); + IS31FL3731_set_color(i, c.r, c.g, c.b); + } + rgblight_config.hue += EFFECT_I_HUE_STEP; + rgb_ring.effect_count++; + animation_status.last_timer = timer_read(); + } + + update_effect(EFFECT_6_COUNT); +} + +typedef void(*effect_fun)(void); +static effect_fun effect_funcs[RING_EFFECT_MAX] = { + ring_effect_no_1, + ring_effect_no_2, + ring_effect_no_3, + ring_effect_no_4, + ring_effect_no_5, + ring_effect_no_6, +}; + +static void custom_effects(void) +{ + effect_funcs[rgb_ring.effect](); +} + +void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) +{ + if (rgb_ring.state != RING_STATE_QMK) { + return; + } + + for (uint8_t i = 0; i < num_leds; i++) { + IS31FL3731_set_color(i, start_led[i].r, start_led[i].g, start_led[i].b); + } +} + + +void rgb_ring_init(void) +{ + i2c_init(); + IS31FL3731_init(DRIVER_ADDR_1); + for (int index = 0; index < DRIVER_LED_TOTAL; index++) { + bool enabled = true; + IS31FL3731_set_led_control_register(index, enabled, enabled, enabled); + } + IS31FL3731_update_led_control_registers(DRIVER_ADDR_1, 0); +} + +void rgb_ring_task(void) +{ + switch (rgb_ring.state) { + case RING_STATE_INIT: // testing mode + testing_mode(); + break; + case RING_STATE_QMK: // qmk effects + //rgblight_task(); + break; + case RING_STATE_CUSTOM: // custom effects + custom_effects(); + break; + default: + break; + }; + + IS31FL3731_update_pwm_buffers(DRIVER_ADDR_1, 0); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) +{ + if (record->event.pressed) { + switch(keycode) { + case RGB_MODE_FORWARD: + if (rgb_ring.state == RING_STATE_INIT) { + // in testing mode, do nothing + return false; + } else if (rgb_ring.state == RING_STATE_CUSTOM) { + // switch to qmk mode + rgblight_config.mode = 1; + rgb_ring.state = RING_STATE_QMK; + rgblight_mode(rgblight_config.mode); + return false; + } else { + // in qmk mode, switch to custom mode? + if (rgblight_config.mode >= RGBLIGHT_MODES) { + rgb_ring.state = RING_STATE_CUSTOM; + return false; + } + } + break; + case RGB_MODE_REVERSE: + if (rgb_ring.state == RING_STATE_INIT) { + // in testing mode, do nothing + return false; + } else if (rgb_ring.state == RING_STATE_CUSTOM) { + // switch to qmk mode + rgblight_config.mode = RGBLIGHT_MODES; + rgb_ring.state = RING_STATE_QMK; + rgblight_mode(rgblight_config.mode); + return false; + } else { + // in qmk mode, switch to custom mode? + if (rgblight_config.mode <= 1) { + rgb_ring.state = RING_STATE_CUSTOM; + return false; + } + } + break; + case KC_F24: + if (rgb_ring.state == RING_STATE_QMK) { + rgb_ring.state = RING_STATE_CUSTOM; + rgb_ring_reset(); + return false; + } else if (rgb_ring.state == RING_STATE_CUSTOM) { + rgb_ring.state = RING_STATE_QMK; + return false; + } + break; + default: + break; + } + } + return process_record_user(keycode, record); +} diff --git a/keyboards/matrix/m20add/rgb_ring.h b/keyboards/matrix/m20add/rgb_ring.h new file mode 100644 index 000000000..1e96b6836 --- /dev/null +++ b/keyboards/matrix/m20add/rgb_ring.h @@ -0,0 +1,23 @@ +/** + * @file rgb_ring.h + * @author astro + * @brief effects for the rgb ring + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +void rgb_ring_init(void); +void rgb_ring_task(void); diff --git a/keyboards/matrix/m20add/rules.mk b/keyboards/matrix/m20add/rules.mk new file mode 100644 index 000000000..6dba15393 --- /dev/null +++ b/keyboards/matrix/m20add/rules.mk @@ -0,0 +1,52 @@ +## chip/board settings +# - the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F4xx + +# Linker script to use +# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +MCU_LDSCRIPT = m20add_boot + +# Startup code to use +# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f4xx + +# Board: it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +BOARD = m20add_bd + +# Cortex version +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 + +USE_FPU = yes + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +OPT_DEFS = + +# Options to pass to dfu-util when flashing +#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +#DFU_SUFFIX_ARGS = -p DF11 -v 0483 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # USB Nkey Rollover +NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in + +RGBLIGHT_ENABLE = yes + +CUSTOM_MATRIX = lite +# project specific files +SRC += matrix.c tca6424.c rgb_ring.c issi/is31fl3731.c +QUANTUM_LIB_SRC += i2c_master.c diff --git a/keyboards/matrix/m20add/tca6424.c b/keyboards/matrix/m20add/tca6424.c new file mode 100644 index 000000000..38cea9f15 --- /dev/null +++ b/keyboards/matrix/m20add/tca6424.c @@ -0,0 +1,115 @@ +/** + * @file tca6424.c + * @author astro + * @brief driver for the tca6424 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "tca6424.h" +#include "i2c_master.h" + +#define TCA6424_INPUT_PORT0 0x0 +#define TCA6424_INPUT_PORT1 0x01 +#define TCA6424_INPUT_PORT2 0x02 + +#define TCA6424_OUTPUT_PORT0 0x04 +#define TCA6424_OUTPUT_PORT1 0x05 +#define TCA6424_OUTPUT_PORT2 0x06 + +#define TCA6424_POLARITY_PORT0 0x08 +#define TCA6424_POLARITY_PORT1 0x09 +#define TCA6424_POLARITY_PORT2 0x0A + +#define TCA6424_CONF_PORT0 0x0C +#define TCA6424_CONF_PORT1 0x0D +#define TCA6424_CONF_PORT2 0x0E + +#define TIMEOUT 100 + +void tca6424_init(void) +{ + i2c_init(); +} + +static void write_port(uint8_t p, uint8_t d) +{ + i2c_writeReg(TCA6424_ADDR, p, &d, 1, TIMEOUT); +} + +static uint8_t read_port(uint8_t port) +{ + uint8_t data = 0; + i2c_readReg(TCA6424_ADDR, port, &data, 1, TIMEOUT); + return data; +} + +void tca6424_write_config(TCA6424_PORT port, uint8_t data) +{ + switch(port) { + case TCA6424_PORT0: + write_port(TCA6424_CONF_PORT0, data); + break; + case TCA6424_PORT1: + write_port(TCA6424_CONF_PORT1, data); + break; + case TCA6424_PORT2: + write_port(TCA6424_CONF_PORT2, data); + break; + } +} + +void tca6424_write_polarity(TCA6424_PORT port, uint8_t data) +{ + switch(port) { + case TCA6424_PORT0: + write_port(TCA6424_POLARITY_PORT0, data); + break; + case TCA6424_PORT1: + write_port(TCA6424_POLARITY_PORT1, data); + break; + case TCA6424_PORT2: + write_port(TCA6424_POLARITY_PORT2, data); + break; + } +} + +void tca6424_write_port(TCA6424_PORT port, uint8_t data) +{ + switch(port) { + case TCA6424_PORT0: + write_port(TCA6424_OUTPUT_PORT0, data); + break; + case TCA6424_PORT1: + write_port(TCA6424_OUTPUT_PORT1, data); + break; + case TCA6424_PORT2: + write_port(TCA6424_OUTPUT_PORT2, data); + break; + } +} + +uint8_t tca6424_read_port(TCA6424_PORT port) +{ + switch(port) { + case TCA6424_PORT0: + return read_port(TCA6424_INPUT_PORT0); + case TCA6424_PORT1: + return read_port(TCA6424_INPUT_PORT1); + case TCA6424_PORT2: + return read_port(TCA6424_INPUT_PORT2); + } + + return 0; +} diff --git a/keyboards/matrix/m20add/tca6424.h b/keyboards/matrix/m20add/tca6424.h new file mode 100644 index 000000000..6153265ed --- /dev/null +++ b/keyboards/matrix/m20add/tca6424.h @@ -0,0 +1,40 @@ +/** + * @file tca6424.h + * @author astro + * @brief driver for the tca6424 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <stdint.h> + +#ifndef TCA6424_ADDR + #define TCA6424_ADDR 0x44 +#endif + +typedef enum { + TCA6424_PORT0 = 0, + TCA6424_PORT1, + TCA6424_PORT2, +} TCA6424_PORT; + +void tca6424_init(void); + +void tca6424_write_config(TCA6424_PORT port, uint8_t data); +void tca6424_write_polarity(TCA6424_PORT port, uint8_t data); + +void tca6424_write_port(TCA6424_PORT port, uint8_t data); +uint8_t tca6424_read_port(TCA6424_PORT port); |