diff options
| -rw-r--r-- | keyboard/hhkb_rn42/MEMO.txt | 1 | ||||
| -rw-r--r-- | keyboard/hhkb_rn42/Makefile | 26 | ||||
| -rw-r--r-- | keyboard/hhkb_rn42/config.h | 6 | ||||
| -rw-r--r-- | keyboard/hhkb_rn42/keymap_common.h | 27 | ||||
| -rw-r--r-- | keyboard/hhkb_rn42/matrix.c | 133 |
5 files changed, 59 insertions, 134 deletions
diff --git a/keyboard/hhkb_rn42/MEMO.txt b/keyboard/hhkb_rn42/MEMO.txt index 02cd2e188..a5fa04db1 100644 --- a/keyboard/hhkb_rn42/MEMO.txt +++ b/keyboard/hhkb_rn42/MEMO.txt @@ -12,6 +12,7 @@ Improving: - Battry voltage display by command; like full(solid), medium(blink), low(flash) - move rn42 to protocol directory when it becomes reusable stack - LUFA sendchar should be buffered and serial_uart.c buffur size is too large(256). +- keyboard LED update Testing: - Factroy reset doesn't work; need to **test again** 10K pull-up is too high? diff --git a/keyboard/hhkb_rn42/Makefile b/keyboard/hhkb_rn42/Makefile index b46b77789..e28b3e0be 100644 --- a/keyboard/hhkb_rn42/Makefile +++ b/keyboard/hhkb_rn42/Makefile @@ -53,12 +53,6 @@ SRC += keymap_common.c \ matrix.c \ led.c -ifdef KEYMAP - SRC := keymap_$(KEYMAP).c $(SRC) -else - SRC := keymap_hasu.c $(SRC) -endif - CONFIG_H = config.h @@ -124,6 +118,26 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration #NKRO_ENABLE = yes # USB Nkey Rollover #KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor +#HHKB_JP = yes # HHKB JP support + + +ifdef HHKB_JP + OPT_DEFS += -DHHKB_JP +endif + + +# +# Keymap file +# +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + ifdef HHKB_JP + SRC := keymap_jp.c $(SRC) + else + SRC := keymap_hasu.c $(SRC) + endif +endif # Search Path diff --git a/keyboard/hhkb_rn42/config.h b/keyboard/hhkb_rn42/config.h index e641a5a2b..a46c7a8bf 100644 --- a/keyboard/hhkb_rn42/config.h +++ b/keyboard/hhkb_rn42/config.h @@ -28,7 +28,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* matrix size */ -#define MATRIX_ROWS 8 +#ifdef HHKB_JP +# define MATRIX_ROWS 16 +#else +# define MATRIX_ROWS 8 +#endif #define MATRIX_COLS 8 diff --git a/keyboard/hhkb_rn42/keymap_common.h b/keyboard/hhkb_rn42/keymap_common.h index ec922a322..3622665f3 100644 --- a/keyboard/hhkb_rn42/keymap_common.h +++ b/keyboard/hhkb_rn42/keymap_common.h @@ -54,4 +54,31 @@ extern const uint16_t fn_actions[]; { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO } \ } + +#define KEYMAP_JP( \ + K02, K32, K62, K22, K12, K52, K72, KA2, K92, K82, KB2, KE2, KF2, KD2, KC2, \ + K03, K63, K23, K13, K53, K73, KA3, K93, K83, KB3, KE3, KF3, KD3, \ + K06, K66, K26, K16, K56, K76, KA6, K96, K86, KB6, KE6, KF6, KD6, KC6, \ + K05, K65, K25, K15, K55, K75, KA5, K95, K85, KB5, KE5, KF5, KD5, KC5, \ + K04, K34, K64, K24, K14, K74, K94, K84, KB4, KE4, KF4, KD4, KC4 \ +) \ +{ \ + { KC_NO, KC_NO, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_NO }, \ + { KC_NO, KC_NO, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \ + { KC_NO, KC_NO, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \ + { KC_NO, KC_NO, KC_##K32, KC_NO, KC_##K34, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_##K52, KC_##K53, KC_NO, KC_##K55, KC_##K56, KC_NO }, \ + { KC_NO, KC_NO, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO }, \ + { KC_NO, KC_NO, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO }, \ + { KC_NO, KC_NO, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86, KC_NO }, \ + { KC_NO, KC_NO, KC_##K92, KC_##K93, KC_##K94, KC_##K95, KC_##K96, KC_NO }, \ + { KC_NO, KC_NO, KC_##KA2, KC_##KA3, KC_NO, KC_##KA5, KC_##KA6, KC_NO }, \ + { KC_NO, KC_NO, KC_##KB2, KC_##KB3, KC_##KB4, KC_##KB5, KC_##KB6, KC_NO }, \ + { KC_NO, KC_NO, KC_##KC2, KC_NO, KC_##KC4, KC_##KC5, KC_##KC6, KC_NO }, \ + { KC_NO, KC_NO, KC_##KD2, KC_##KD3, KC_##KD4, KC_##KD5, KC_##KD6, KC_NO }, \ + { KC_NO, KC_NO, KC_##KE2, KC_##KE3, KC_##KE4, KC_##KE5, KC_##KE6, KC_NO }, \ + { KC_NO, KC_NO, KC_##KF2, KC_##KF3, KC_##KF4, KC_##KF5, KC_##KF6, KC_NO } \ +} + #endif diff --git a/keyboard/hhkb_rn42/matrix.c b/keyboard/hhkb_rn42/matrix.c index d0731ef1f..b0af4baa5 100644 --- a/keyboard/hhkb_rn42/matrix.c +++ b/keyboard/hhkb_rn42/matrix.c @@ -20,20 +20,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <stdint.h> #include <stdbool.h> -#include <avr/io.h> -#include <avr/interrupt.h> #include <util/delay.h> #include "print.h" #include "debug.h" #include "util.h" #include "timer.h" #include "matrix.h" - - -// Timer resolution check -#if (1000000/TIMER_RAW_FREQ > 20) -# error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB." -#endif +#include "hhkb_avr.h" // matrix state buffer(1:on, 0:off) @@ -43,122 +36,6 @@ static matrix_row_t _matrix0[MATRIX_ROWS]; static matrix_row_t _matrix1[MATRIX_ROWS]; -// Matrix I/O ports -// -// row: HC4051[A,B,C] selects scan row0-7 -// col: LS145[A,B,C,D] selects scan col0-7 and enable(D) -// key: on: 0/off: 1 -// prev: unknown: output previous key state(negated)? - -#if defined(__AVR_AT90USB1286__) -// Ports for Teensy++ -// row: PB0-2 -// col: PB3-5,6 -// key: PE6(pull-uped) -// prev: PE7 -#define KEY_INIT() do { \ - DDRB |= 0x7F; \ - DDRE |= (1<<7); \ - DDRE &= ~(1<<6); \ - PORTE |= (1<<6); \ -} while (0) -#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ - (((COL) & 0x07)<<3) | \ - ((ROW) & 0x07)) -#define KEY_ENABLE() (PORTB &= ~(1<<6)) -#define KEY_UNABLE() (PORTB |= (1<<6)) -#define KEY_STATE() (PINE & (1<<6)) -#define KEY_PREV_ON() (PORTE |= (1<<7)) -#define KEY_PREV_OFF() (PORTE &= ~(1<<7)) -#define KEY_POWER_ON() -#define KEY_POWER_OFF() - -#elif defined(__AVR_ATmega32U4__) -// Ports for my designed Alt Controller PCB -// row: PB0-2 -// col: PB3-5,6 -// key: PD7(pull-uped) -// prev: PB7 -// power: PD4(L:off/H:on) -#define KEY_INIT() do { \ - DDRB = 0xFF; \ - PORTB = 0x00; \ - DDRD &= ~0x80; \ - PORTD |= 0x80; \ - /* keyswitch board power on */ \ - DDRD |= (1<<4); \ - PORTD |= (1<<4); \ - KEY_UNABLE(); \ - KEY_PREV_OFF(); \ -} while (0) -#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ - (((COL) & 0x07)<<3) | \ - ((ROW) & 0x07)) -#define KEY_ENABLE() (PORTB &= ~(1<<6)) -#define KEY_UNABLE() (PORTB |= (1<<6)) -#define KEY_STATE() (PIND & (1<<7)) -#define KEY_PREV_ON() (PORTB |= (1<<7)) -#define KEY_PREV_OFF() (PORTB &= ~(1<<7)) -#define KEY_POWER_ON() -#define KEY_POWER_OFF() -/* -#define KEY_POWER_ON() do { \ - KEY_INIT(); \ - PORTD |= (1<<4); \ - _delay_ms(1); \ -} while (0) -#define KEY_POWER_OFF() do { \ - PORTD &= ~(1<<4); \ - DDRB &= ~0xFF; \ - PORTB &= ~0xFF; \ - DDRB &= ~0x80; \ - PORTB &= ~0x80; \ -} while (0) -*/ - - -#elif defined(__AVR_ATmega328P__) -// Ports for V-USB -// key: PB0(pull-uped) -// prev: PB1 -// row: PB2-4 -// col: PC0-2,3 -// power: PB5(Low:on/Hi-z:off) -#define KEY_INIT() do { \ - DDRB |= 0x3E; \ - DDRB &= ~(1<<0); \ - PORTB |= 1<<0; \ - DDRC |= 0x0F; \ - KEY_UNABLE(); \ - KEY_PREV_OFF(); \ -} while (0) -#define KEY_SELECT(ROW, COL) do { \ - PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \ - PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \ -} while (0) -#define KEY_ENABLE() (PORTC &= ~(1<<3)) -#define KEY_UNABLE() (PORTC |= (1<<3)) -#define KEY_STATE() (PINB & (1<<0)) -#define KEY_PREV_ON() (PORTB |= (1<<1)) -#define KEY_PREV_OFF() (PORTB &= ~(1<<1)) -// Power supply switching -#define KEY_POWER_ON() do { \ - KEY_INIT(); \ - PORTB &= ~(1<<5); \ - _delay_ms(1); \ -} while (0) -#define KEY_POWER_OFF() do { \ - DDRB &= ~0x3F; \ - PORTB &= ~0x3F; \ - DDRC &= ~0x0F; \ - PORTC &= ~0x0F; \ -} while (0) - -#else -# error "define code for matrix scan" -#endif - - inline uint8_t matrix_rows(void) { @@ -199,13 +76,13 @@ uint8_t matrix_scan(void) for (uint8_t row = 0; row < MATRIX_ROWS; row++) { for (uint8_t col = 0; col < MATRIX_COLS; col++) { KEY_SELECT(row, col); - _delay_us(40); + _delay_us(5); // Not sure this is needed. This just emulates HHKB controller's behaviour. if (matrix_prev[row] & (1<<col)) { KEY_PREV_ON(); } - _delay_us(7); + _delay_us(10); // NOTE: KEY_STATE is valid only in 20us after KEY_ENABLE. // If V-USB interrupts in this section we could lose 40us or so @@ -241,11 +118,13 @@ uint8_t matrix_scan(void) matrix[row] = matrix_prev[row]; } + _delay_us(5); KEY_PREV_OFF(); KEY_UNABLE(); + // NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE. // This takes 25us or more to make sure KEY_STATE returns to idle state. - _delay_us(150); + _delay_us(75); } } KEY_POWER_OFF(); |