aboutsummaryrefslogtreecommitdiffstats
path: root/tmk_core
diff options
context:
space:
mode:
authorDamien <Dbroqua@users.noreply.github.com>2017-01-26 09:05:55 +0100
committerGitHub <noreply@github.com>2017-01-26 09:05:55 +0100
commitb7b94bfb132aa5f2f79b587fcfa6b1197485db27 (patch)
tree4cae966728b7b6baf101a7ab2b95eeff16cce141 /tmk_core
parentf91f0a715d51286064bfe808b0d463878a6d3588 (diff)
parentaac7c0aa4db6b27f4c8d8f3849f8fd41f07e892a (diff)
downloadfirmware-b7b94bfb132aa5f2f79b587fcfa6b1197485db27.tar.gz
firmware-b7b94bfb132aa5f2f79b587fcfa6b1197485db27.tar.bz2
firmware-b7b94bfb132aa5f2f79b587fcfa6b1197485db27.zip
Merge pull request #17 from qmk/master
Merged from QMK project
Diffstat (limited to 'tmk_core')
-rw-r--r--tmk_core/common.mk8
-rw-r--r--tmk_core/common/avr/bootloader.c12
-rw-r--r--tmk_core/common/avr/timer.c33
-rw-r--r--tmk_core/common/command.c3
-rw-r--r--tmk_core/common/keyboard.c2
-rw-r--r--tmk_core/protocol/vusb.mk3
-rw-r--r--tmk_core/protocol/vusb/main.c6
-rw-r--r--tmk_core/protocol/vusb/vusb.c22
8 files changed, 73 insertions, 16 deletions
diff --git a/tmk_core/common.mk b/tmk_core/common.mk
index 3c1373c08..a86dccc61 100644
--- a/tmk_core/common.mk
+++ b/tmk_core/common.mk
@@ -80,6 +80,14 @@ ifeq ($(strip $(SLEEP_LED_ENABLE)), yes)
TMK_COMMON_DEFS += -DNO_SUSPEND_POWER_DOWN
endif
+ifeq ($(strip $(NO_UART)), yes)
+ TMK_COMMON_DEFS += -DNO_UART
+endif
+
+ifeq ($(strip $(NO_SUSPEND_POWER_DOWN)), yes)
+ TMK_COMMON_DEFS += -DNO_SUSPEND_POWER_DOWN
+endif
+
ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
TMK_COMMON_SRC += $(COMMON_DIR)/backlight.c
TMK_COMMON_DEFS += -DBACKLIGHT_ENABLE
diff --git a/tmk_core/common/avr/bootloader.c b/tmk_core/common/avr/bootloader.c
index ad547b985..34db8d0b0 100644
--- a/tmk_core/common/avr/bootloader.c
+++ b/tmk_core/common/avr/bootloader.c
@@ -1,6 +1,7 @@
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
+#include <avr/eeprom.h>
#include <avr/interrupt.h>
#include <avr/wdt.h>
#include <util/delay.h>
@@ -89,6 +90,12 @@ void bootloader_jump(void) {
_delay_ms(5);
#endif
+ #ifdef BOOTLOADHID_BOOTLOADER
+ // force bootloadHID to stay in bootloader mode, so that it waits
+ // for a new firmware to be flashed
+ eeprom_write_byte((uint8_t *)1, 0x00);
+ #endif
+
// watchdog reset
reset_key = BOOTLOADER_RESET_KEY;
wdt_enable(WDTO_250MS);
@@ -114,6 +121,11 @@ void bootloader_jump(void) {
#endif
}
+#ifdef __AVR_ATmega32A__
+// MCUSR is actually called MCUCSR in ATmega32A
+#define MCUSR MCUCSR
+#endif
+
/* this runs before main() */
void bootloader_jump_after_watchdog_reset(void) __attribute__ ((used, naked, section (".init3")));
void bootloader_jump_after_watchdog_reset(void)
diff --git a/tmk_core/common/avr/timer.c b/tmk_core/common/avr/timer.c
index 84af44488..369015200 100644
--- a/tmk_core/common/avr/timer.c
+++ b/tmk_core/common/avr/timer.c
@@ -29,25 +29,35 @@ volatile uint32_t timer_count;
void timer_init(void)
{
- // Timer0 CTC mode
- TCCR0A = 0x02;
-
#if TIMER_PRESCALER == 1
- TCCR0B = 0x01;
+ uint8_t prescaler = 0x01;
#elif TIMER_PRESCALER == 8
- TCCR0B = 0x02;
+ uint8_t prescaler = 0x02;
#elif TIMER_PRESCALER == 64
- TCCR0B = 0x03;
+ uint8_t prescaler = 0x03;
#elif TIMER_PRESCALER == 256
- TCCR0B = 0x04;
+ uint8_t prescaler = 0x04;
#elif TIMER_PRESCALER == 1024
- TCCR0B = 0x05;
+ uint8_t prescaler = 0x05;
#else
# error "Timer prescaler value is NOT vaild."
#endif
+#ifndef __AVR_ATmega32A__
+ // Timer0 CTC mode
+ TCCR0A = 0x02;
+
+ TCCR0B = prescaler;
+
OCR0A = TIMER_RAW_TOP;
TIMSK0 = (1<<OCIE0A);
+#else
+ // Timer0 CTC mode
+ TCCR0 = (1 << WGM01) | prescaler;
+
+ OCR0 = TIMER_RAW_TOP;
+ TIMSK = (1 << OCIE0);
+#endif
}
inline
@@ -107,7 +117,12 @@ uint32_t timer_elapsed32(uint32_t last)
}
// excecuted once per 1ms.(excess for just timer count?)
-ISR(TIMER0_COMPA_vect)
+#ifndef __AVR_ATmega32A__
+#define TIMER_INTERRUPT_VECTOR TIMER0_COMPA_vect
+#else
+#define TIMER_INTERRUPT_VECTOR TIMER0_COMP_vect
+#endif
+ISR(TIMER_INTERRUPT_VECTOR, ISR_NOBLOCK)
{
timer_count++;
}
diff --git a/tmk_core/common/command.c b/tmk_core/common/command.c
index 5f29bc0b4..f79d5a257 100644
--- a/tmk_core/common/command.c
+++ b/tmk_core/common/command.c
@@ -235,8 +235,11 @@ static void print_status(void)
print("\n\t- Status -\n");
print_val_hex8(host_keyboard_leds());
+#ifndef PROTOCOL_VUSB
+ // these aren't set on the V-USB protocol, so we just ignore them for now
print_val_hex8(keyboard_protocol);
print_val_hex8(keyboard_idle);
+#endif
#ifdef NKRO_ENABLE
print_val_hex8(keymap_config.nkro);
#endif
diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c
index 371d93f3e..765350792 100644
--- a/tmk_core/common/keyboard.c
+++ b/tmk_core/common/keyboard.c
@@ -188,7 +188,7 @@ MATRIX_LOOP_END:
#endif
#ifdef VISUALIZER_ENABLE
- visualizer_update(default_layer_state, layer_state, host_keyboard_leds());
+ visualizer_update(default_layer_state, layer_state, visualizer_get_mods(), host_keyboard_leds());
#endif
// update LED
diff --git a/tmk_core/protocol/vusb.mk b/tmk_core/protocol/vusb.mk
index 3cba3f71a..897b833e1 100644
--- a/tmk_core/protocol/vusb.mk
+++ b/tmk_core/protocol/vusb.mk
@@ -18,4 +18,5 @@ endif
# Search Path
-VPATH += $(TMK_DIR)/protocol/vusb:$(TMK_DIR)/protocol/vusb/usbdrv
+VPATH += $(TMK_PATH)/$(VUSB_DIR)
+VPATH += $(TMK_PATH)/$(VUSB_DIR)/usbdrv
diff --git a/tmk_core/protocol/vusb/main.c b/tmk_core/protocol/vusb/main.c
index 8e4a266e9..f6a0c7e9a 100644
--- a/tmk_core/protocol/vusb/main.c
+++ b/tmk_core/protocol/vusb/main.c
@@ -48,8 +48,12 @@ int main(void)
uint16_t last_timer = timer_read();
#endif
+#ifdef CLKPR
+ // avoid unintentional changes of clock frequency in devices that have a
+ // clock prescaler
CLKPR = 0x80, CLKPR = 0;
-#ifndef PS2_USE_USART
+#endif
+#ifndef NO_UART
uart_init(UART_BAUD_RATE);
#endif
diff --git a/tmk_core/protocol/vusb/vusb.c b/tmk_core/protocol/vusb/vusb.c
index eaa1c512d..a8c13b928 100644
--- a/tmk_core/protocol/vusb/vusb.c
+++ b/tmk_core/protocol/vusb/vusb.c
@@ -15,6 +15,8 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <avr/eeprom.h>
+#include <avr/wdt.h>
#include <stdint.h>
#include "usbdrv.h"
#include "usbconfig.h"
@@ -24,6 +26,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "debug.h"
#include "host_driver.h"
#include "vusb.h"
+#include "bootloader.h"
static uint8_t vusb_keyboard_leds = 0;
@@ -163,6 +166,7 @@ static struct {
uint16_t len;
enum {
NONE,
+ BOOTLOADER,
SET_LED
} kind;
} last_req;
@@ -193,6 +197,11 @@ usbRequest_t *rq = (void *)data;
debug("SET_LED: ");
last_req.kind = SET_LED;
last_req.len = rq->wLength.word;
+#ifdef BOOTLOADER_SIZE
+ } else if(rq->wValue.word == 0x0301) {
+ last_req.kind = BOOTLOADER;
+ last_req.len = rq->wLength.word;
+#endif
}
return USB_NO_MSG; // to get data in usbFunctionWrite
} else {
@@ -220,6 +229,11 @@ uchar usbFunctionWrite(uchar *data, uchar len)
last_req.len = 0;
return 1;
break;
+ case BOOTLOADER:
+ usbDeviceDisconnect();
+ bootloader_jump();
+ return 1;
+ break;
case NONE:
default:
return -1;
@@ -266,7 +280,7 @@ const PROGMEM uchar keyboard_hid_report[] = {
0x95, 0x06, // Report Count (6),
0x75, 0x08, // Report Size (8),
0x15, 0x00, // Logical Minimum (0),
- 0x25, 0xFF, 0x00 // Logical Maximum(255),
+ 0x25, 0xFF, 0x00, // Logical Maximum(255),
0x05, 0x07, // Usage Page (Key Codes),
0x19, 0x00, // Usage Minimum (0),
0x29, 0xFF, // Usage Maximum (255),
@@ -336,7 +350,7 @@ const PROGMEM uchar mouse_hid_report[] = {
0xa1, 0x01, // COLLECTION (Application)
0x85, REPORT_ID_SYSTEM, // REPORT_ID (2)
0x15, 0x01, // LOGICAL_MINIMUM (0x1)
- 0x25, 0xb7, 0x00 // LOGICAL_MAXIMUM (0xb7)
+ 0x25, 0xb7, 0x00, // LOGICAL_MAXIMUM (0xb7)
0x19, 0x01, // USAGE_MINIMUM (0x1)
0x29, 0xb7, // USAGE_MAXIMUM (0xb7)
0x75, 0x10, // REPORT_SIZE (16)
@@ -481,11 +495,11 @@ USB_PUBLIC usbMsgLen_t usbFunctionDescriptor(struct usbRequest *rq)
/* interface index */
switch (rq->wIndex.word) {
case 0:
- usbMsgPtr = keyboard_hid_report;
+ usbMsgPtr = (unsigned char *)keyboard_hid_report;
len = sizeof(keyboard_hid_report);
break;
case 1:
- usbMsgPtr = mouse_hid_report;
+ usbMsgPtr = (unsigned char *)mouse_hid_report;
len = sizeof(mouse_hid_report);
break;
}