Merge remote-tracking branch 'upstream/master'

* upstream/master: (1239 commits)
  Update ez.c
  removes planck/rev3 temporarily
  Move hand_swap_config to ez.c, removes error for infinity
  Update Makefile
  ergodox: Update algernon's keymap to v1.9
  Added VS Code dir to .gitignore
  Support the Pegasus Hoof controller.
  [Jack & Erez] Simplifies and documents TO
  add readme
  use wait_ms instead of _delay_ms
  add messenger
  init keymap
  Add example keymap
  Adding whiskey_tango_foxtrot_capslock ergodox keymap
  Unicode map framework. Allow unicode up to 0xFFFFF using separate mapping table
  CIE 1931 dim curve
  Apply the dim curve to the RGB output
  Update the Cluecard readme files
  Tune snake and knight intervals for Cluecard
  Tunable RGB light intervals
  ...

1 files changed, 18 insertions, 0 deletions

diff --git a/quantum/visualizer/readme.md b/quantum/visualizer/readme.md
new file mode 100644
index 000000000..545ba2270
--- /dev/null
+++ b/quantum/visualizer/readme.md
@@ -0,0 +1,18 @@
+# A visualization library for the TMK keyboard firmware
+
+This library is designed to work together with the [TMK keyboard firmware](https://github.com/tmk/tmk_keyboard). Currently it only works for [Chibios](http://www.chibios.org/)
+ flavors, but it would be possible to add support for other configurations as well. The LCD display functionality is provided by the [uGFX library](http://www.ugfx.org/). 
+
+## To use this library as a user
+You can and should modify the visualizer\_user.c file. Check the comments in the file for more information.
+
+## To add this library to custom keyboard projects
+
+1. Add tmk_visualizer as a submodule to your project
+1. Set VISUALIZER_DIR in the main keyboard project makefile to point to the submodule
+1. Define LCD\_ENABLE and/or LCD\_BACKLIGHT\_ENABLE, to enable support
+1. Include the visualizer.mk make file
+1. Copy the files in the example\_integration folder to your keyboard project
+1. All other files than the callback.c file are included automatically, so you will need to add callback.c to your makefile manually. If you already have a similar file in your project, you can just copy the functions instead of the whole file.
+1. Edit the files to match your hardware. You might might want to read the Chibios and UGfx documentation, for more information.
+1. If you enable LCD support you might also have to write a custom uGFX display driver, check the uGFX documentation for that. You probably also want to enable SPI support in your Chibios configuration.